diff --git a/runtime/doc/change.txt b/runtime/doc/change.txt
index 3f2f490..2280f65 100644
--- a/runtime/doc/change.txt
+++ b/runtime/doc/change.txt
@@ -1,4 +1,4 @@
-*change.txt*    For Vim version 7.4.  Last change: 2016 Feb 10
+*change.txt*    For Vim version 7.4.  Last change: 2016 Mar 08
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -109,7 +109,9 @@
 							*J*
 J			Join [count] lines, with a minimum of two lines.
 			Remove the indent and insert up to two spaces (see
-			below).
+			below).  Fails when on the last line of the buffer.
+			If [count] is too big it is reduce to the number of
+			lines available.
 
 							*v_J*
 {Visual}J		Join the highlighted lines, with a minimum of two
diff --git a/runtime/doc/channel.txt b/runtime/doc/channel.txt
index a89bdb7..36a7c9b 100644
--- a/runtime/doc/channel.txt
+++ b/runtime/doc/channel.txt
@@ -1,4 +1,4 @@
-*channel.txt*      For Vim version 7.4.  Last change: 2016 Mar 06
+*channel.txt*      For Vim version 7.4.  Last change: 2016 Mar 12
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -44,8 +44,8 @@
 4. Running a filter, synchronously.
    Uses pipes.
 
-For when using sockets See |job-start|, |job-may-start| and |channel-open|.
-For 2 and 3, one or more jobs using pipes, see |job-start|.
+For when using sockets See |job-start|, |job-start-nochannel| and
+|channel-open|.  For 2 and 3, one or more jobs using pipes, see |job-start|.
 For 4 use the ":{range}!cmd" command, see |filter|.
 
 Over the socket and pipes these protocols are available:
@@ -162,7 +162,7 @@
 		the channel uses pipes.  When "err-cb" wasn't set the channel
 		callback is used.
 
-		TODO:					*close-cb*
+							*close-cb*
 "close-cb"	A function that is called when the channel gets closed, other
 		than by calling ch_close().  It should be defined like this: >
 	func MyCloseHandler(channel)
@@ -410,7 +410,6 @@
 	"open"		The channel can be used.
 	"closed"	The channel was closed.
 
-TODO:
 To obtain the job associated with a channel: ch_getjob(channel)
 
 To read one message from a channel: >
@@ -486,15 +485,6 @@
 job stdin.  This allows for editing the last line and sending it when pressing
 Enter.
 
-TODO:
-To run a job and read its output once it is done: >
-	let job = job_start({command}, {'exit-cb': 'MyHandler'})
-	func MyHandler(job, status)
-	  let channel = job_getchannel()
-	  let output = ch_readall(channel)
-	  " parse output
-	endfunc
-
 ==============================================================================
 9. Starting a job without a channel			*job-start-nochannel*
 
@@ -504,28 +494,23 @@
 
 This starts {command} in the background, Vim does not wait for it to finish.
 
-TODO:
 When Vim sees that neither stdin, stdout or stderr are connected, no channel
 will be created.  Often you will want to include redirection in the command to
 avoid it getting stuck.
 
 There are several options you can use, see |job-options|.
 
-TODO:							*job-may-start*
-To start a job only when connecting to an address does not work use
-job_maystart('command', {address}, {options}), For Example: >
-	let job = job_maystart(command, address, {"waittime": 1000})
-	let channel = job_gethandle(job)
-
-This comes down to: >
+							*job-start-if-needed*
+To start a job only when connecting to an address does not work, do something
+like this: >
 	let channel = ch_open(address, {"waittime": 0})
 	if ch_status(channel) == "fail"
 	  let job = job_start(command)
 	  let channel = ch_open(address, {"waittime": 1000})
-	  call job_sethandle(channel)
 	endif
-Note that the specified waittime applies to when the job has been started.
-This gives the job some time to make the port available.
+
+Note that the waittime for ch_open() gives the job one second to make the port
+available.
 
 ==============================================================================
 10. Job options						*job-options*
@@ -560,43 +545,54 @@
 "stoponexit": ""	Do not stop the job when Vim exits.
 			The default is "term".
 
-TODO:						*job-term*
+						*job-term*
 "term": "open"		Start a terminal and connect the job
 			stdin/stdout/stderr to it.
+			NOTE: Not implemented yet!
 
-						*job-in-io*
-"in-io": "null"		disconnect stdin  TODO
+"channel": {channel}	Use an existing channel instead of creating a new one.
+			The parts of the channel that get used for the new job
+			will be disconnected from what they were used before.
+			If the channel was still use by another job this may
+			cause I/O errors.
+			Existing callbacks and other settings remain.
+
+				*job-in-io* *in-top* *in-bot* *in-name* *in-buf*
+"in-io": "null"		disconnect stdin (read from /dev/null)
 "in-io": "pipe"		stdin is connected to the channel (default)
-"in-io": "file"		stdin reads from a file  TODO
+"in-io": "file"		stdin reads from a file
 "in-io": "buffer"	stdin reads from a buffer
 "in-top": number	when using "buffer": first line to send (default: 1)
 "in-bot": number	when using "buffer": last line to send (default: last)
 "in-name": "/path/file"	the name of the file or buffer to read from
-"in-buf": number	the number of the buffer to read from  TODO
+"in-buf": number	the number of the buffer to read from
 
-						*job-out-io*
-"out-io": "null"	disconnect stdout  TODO
+				*job-out-io* *out-name* *out-buf*
+"out-io": "null"	disconnect stdout (goes to /dev/null)
 "out-io": "pipe"	stdout is connected to the channel (default)
-"out-io": "file"	stdout writes to a file  TODO
+"out-io": "file"	stdout writes to a file
 "out-io": "buffer" 	stdout appends to a buffer
 "out-name": "/path/file" the name of the file or buffer to write to
-"out-buf": number	the number of the buffer to write to  TODO
+"out-buf": number	the number of the buffer to write to
 
-						*job-err-io*
+				*job-err-io* *err-name* *err-buf*
 "err-io": "out"		stderr messages to go to stdout
-"err-io": "null"	disconnect stderr  TODO
+"err-io": "null"	disconnect stderr  (goes to /dev/null)
 "err-io": "pipe"	stderr is connected to the channel (default)
-"err-io": "file"	stderr writes to a file  TODO
-"err-io": "buffer" 	stderr appends to a buffer  TODO
+"err-io": "file"	stderr writes to a file
+"err-io": "buffer" 	stderr appends to a buffer
 "err-name": "/path/file" the name of the file or buffer to write to
-"err-buf": number	the number of the buffer to write to  TODO
+"err-buf": number	the number of the buffer to write to
+
+
+Writing to a buffer ~
 
 When the out-io or err-io mode is "buffer" and there is a callback, the text
 is appended to the buffer before invoking the callback.
 
 When a buffer is used both for input and output, the output lines are put
 above the last line, since the last line is what is written to the channel
-input.  Otherwise lines are appened below the last line.
+input.  Otherwise lines are appended below the last line.
 
 When using JS or JSON mode with "buffer", only messages with zero or negative
 ID will be added to the buffer, after decoding + encoding.  Messages with a
@@ -616,6 +612,14 @@
 
 Undo is synced for every added line.
 
+
+Writing to a file ~
+
+The file is created with permissions 600 (read-write for the user, not
+accessible for others).  Use |setfperm()| to change this.
+
+If the file already exists it is truncated.
+
 ==============================================================================
 11. Controlling a job					*job-control*
 
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index 8910f2f..5284293 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 7.4.  Last change: 2016 Mar 07
+*eval.txt*	For Vim version 7.4.  Last change: 2016 Mar 08
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -4468,6 +4468,9 @@
 
 job_getchannel({job})					 *job_getchannel()*
 		Get the channel handle that {job} is using.
+		To check if the job has no channel: >
+			if string(job_getchannel()) == 'channel fail'
+<
 		{only available when compiled with the |+job| feature}
 
 job_setoptions({job}, {options})			*job_setoptions()*
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 09518c0..0396011 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.4.  Last change: 2016 Feb 24
+*options.txt*	For Vim version 7.4.  Last change: 2016 Mar 08
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -7769,13 +7769,15 @@
 				{not in Vi}
 				{only in the GTK+ 2 GUI}
 	Controls the size of toolbar icons.  The possible values are:
-		tiny		Use tiny toolbar icons.
-		small		Use small toolbar icons (default).
-		medium		Use medium-sized toolbar icons.
-		large		Use large toolbar icons.
+		tiny		Use tiny icons.
+		small		Use small icons (default).
+		medium		Use medium-sized icons.
+		large		Use large icons.
+		huge		Use even larger icons.
+		giant		Use very big icons.
 	The exact dimensions in pixels of the various icon sizes depend on
-	the current theme.  Common dimensions are large=32x32, medium=24x24,
-	small=20x20 and tiny=16x16.
+	the current theme.  Common dimensions are giant=48x48, huge=32x32,
+	large=24x24, medium=24x24, small=20x20 and tiny=16x16.
 
 	If 'toolbariconsize' is empty, the global default size as determined
 	by user preferences or the current theme is used.
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 7deba0c..1c644ca 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -5226,6 +5226,7 @@
 charset	mbyte.txt	/*charset*
 charset-conversion	mbyte.txt	/*charset-conversion*
 chill.vim	syntax.txt	/*chill.vim*
+chmod	eval.txt	/*chmod*
 cindent()	eval.txt	/*cindent()*
 cinkeys-format	indent.txt	/*cinkeys-format*
 cino-#	indent.txt	/*cino-#*
@@ -5642,7 +5643,9 @@
 end-of-file	pattern.txt	/*end-of-file*
 enlightened-terminal	syntax.txt	/*enlightened-terminal*
 erlang.vim	syntax.txt	/*erlang.vim*
+err-buf	channel.txt	/*err-buf*
 err-cb	channel.txt	/*err-cb*
+err-name	channel.txt	/*err-name*
 err-timeout	channel.txt	/*err-timeout*
 errmsg-variable	eval.txt	/*errmsg-variable*
 error-file-format	quickfix.txt	/*error-file-format*
@@ -6762,6 +6765,10 @@
 improvements-5	version5.txt	/*improvements-5*
 improvements-6	version6.txt	/*improvements-6*
 improvements-7	version7.txt	/*improvements-7*
+in-bot	channel.txt	/*in-bot*
+in-buf	channel.txt	/*in-buf*
+in-name	channel.txt	/*in-name*
+in-top	channel.txt	/*in-top*
 inactive-buffer	windows.txt	/*inactive-buffer*
 include-search	tagsrch.txt	/*include-search*
 inclusive	motion.txt	/*inclusive*
@@ -6845,11 +6852,11 @@
 job-err-io	channel.txt	/*job-err-io*
 job-exit-cb	channel.txt	/*job-exit-cb*
 job-in-io	channel.txt	/*job-in-io*
-job-may-start	channel.txt	/*job-may-start*
 job-options	channel.txt	/*job-options*
 job-out-cb	channel.txt	/*job-out-cb*
 job-out-io	channel.txt	/*job-out-io*
 job-start	channel.txt	/*job-start*
+job-start-if-needed	channel.txt	/*job-start-if-needed*
 job-start-nochannel	channel.txt	/*job-start-nochannel*
 job-stoponexit	channel.txt	/*job-stoponexit*
 job-term	channel.txt	/*job-term*
@@ -7572,7 +7579,9 @@
 os_vms.txt	os_vms.txt	/*os_vms.txt*
 os_win32.txt	os_win32.txt	/*os_win32.txt*
 other-features	vi_diff.txt	/*other-features*
+out-buf	channel.txt	/*out-buf*
 out-cb	channel.txt	/*out-cb*
+out-name	channel.txt	/*out-name*
 out-timeout	channel.txt	/*out-timeout*
 p	change.txt	/*p*
 pack-add	repeat.txt	/*pack-add*
@@ -7979,6 +7988,7 @@
 setbufvar()	eval.txt	/*setbufvar()*
 setcharsearch()	eval.txt	/*setcharsearch()*
 setcmdpos()	eval.txt	/*setcmdpos()*
+setfperm()	eval.txt	/*setfperm()*
 setline()	eval.txt	/*setline()*
 setloclist()	eval.txt	/*setloclist()*
 setmatches()	eval.txt	/*setmatches()*
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index c6c38e1..afa8219 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.4.  Last change: 2016 Mar 07
+*todo.txt*      For Vim version 7.4.  Last change: 2016 Mar 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -35,16 +35,11 @@
 -------------------- Known bugs and current work -----------------------
 
 +channel:
+- CHANNEL_PIPES -> FEAT_JOB
+- FEAT_JOB / FEAT_CHANNEL -> FEAT_JOBCHANNEL ?
 - move code from eval.c to channel.c
-- implement TODO items in ":help channel":
-   - job_start() options:
-	in-io: null, in-buf
-	out-io: null, file, out-buf
-	err-io: null, file (err-name), buffer (err-buf)
-	existing channel to use
-   - job_maystart()
-   - add job_info(): process ID, run/dead, etc.
-   - add ch_info(): in/out/err mode, timeout, callbacks, etc.
+- add job_info(): process ID, run/dead, etc.
+- add ch_info(): in/out/err mode, timeout, callbacks, etc.
 - Move more details from eval.txt to channel.txt.  Add tags in eval.txt.
 - When receiving malformed json starting with a quote it doesn't get
   discarded.  Any invalid JSON or JSON that isn't a list will block further
@@ -53,16 +48,16 @@
   properly.
 - When a message in the queue but there is no callback, drop it after a while?
   Add timestamp to queued messages and callbacks with ID, remove after a
-  minute.
-- Add more log calls, basically at every branch, before every callback, etc.
-- add remark about undo sync, is there a way to force it?
+  minute.  Option to set the droptime.
+- Add more ch_log calls, basically at every branch, before every callback, etc.
+- Add remark about undo sync, is there a way to force it?
 - When starting a job, have an option to open the server socket, so we know
   the port, and pass it to the command with --socket-fd {nr}. (Olaf Dabrunz,
   Feb 9)  How to do this on MS-Windows?
 - Add more unit-testing in json_test.c
 - Add a test where ["eval","getline(123)"] gets a line with special
   characters (NUL, 0x80, etc.).  Check that it isn't garbled.
-- make sure errors lead to a useful error msg. ["ex","foobar"]
+- Make sure errors lead to a useful error msg. ["ex","foobar"]
 - For connection to server, a "keep open" flag would be useful.  Retry
   connecting in the main loop with zero timeout.
 Later
@@ -71,13 +66,16 @@
 
 emoji patch from Yasuhiro Matsumoto.  Asked Thomas Dickey.
 
+Remove sticky type checking.
+
 Packages:
 - Add command to update help tags in 'runtimepath'.  Pathogen has something
   like that.
 - colorscheme command in .vimrc doesn't work.
-   - Postpone until later?
-   - Also search in 'packpath'?
-   - command to load packages now?
+   - Also search in 'packpath', both "start" and "opt", don't add dir to 'rtp'
+- command like :runtime that also search 'packpath'.  :packruntime
+    use "ever" or "opt"?  both?
+- command to load packages now?
 
 More plugin support:
 - Have a way to install a callback from the main loop.  Called every second or
@@ -198,9 +196,13 @@
 Patch to support 64 bit ints for Number. (Ken Takata, 2016 Jan 21)
 Also in update of Feb 24?
 
+After 7.5 is released:
+- Drop support for older MS-Windows systems, before XP.
+  Patch from Ken Takata, 2016 Mar 8.
+
 Patch to add setbufline(). (email from Yasuhiro Matsumoto, patch by Ozaki
 Kiichi, 2016 Feb 28)
-https://gist.github.com/ichizok/64bdc92aed19ec9001dd
+Update Mar 8: https://gist.github.com/mattn/23c1f50999084992ca98
 
 Need to try out instructions in INSSTALLpc.txt about how to install all
 interfaces and how to build Vim with them.
@@ -225,8 +227,6 @@
 Should jsonencode()/jsondecode() restrict recursiveness?
 Or avoid recursiveness.
 
-Patch to fix bug in statusline highlighting. (Christian Brabandt, 2016 Feb 2)
-
 Use vim.vim syntax highlighting for help file examples, but without ":" in
 'iskeyword' for syntax.
 
@@ -306,7 +306,7 @@
 
 Python: ":py raw_input('prompt')" doesn't work. (Manu Hack)
 
-Comparing nested structures with "==" uses a different comperator than when
+Comparing nested structures with "==" uses a different comparator than when
 comparing individual items.
 Also, "'' == 0" evaluates to true, which isn't nice.
 Add "===" to have a strict comparison (type and value match).
diff --git a/runtime/ftplugin/r.vim b/runtime/ftplugin/r.vim
index 43b208b..4ea3073 100644
--- a/runtime/ftplugin/r.vim
+++ b/runtime/ftplugin/r.vim
@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language: R
 " Maintainer: Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Sun Feb 23, 2014  04:07PM
+" Homepage: https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:38PM
 
 " Only do this when not yet done for this buffer
 if exists("b:did_ftplugin")
diff --git a/runtime/ftplugin/rhelp.vim b/runtime/ftplugin/rhelp.vim
index 9b72fb4..fdac38f 100644
--- a/runtime/ftplugin/rhelp.vim
+++ b/runtime/ftplugin/rhelp.vim
@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language: R help file
 " Maintainer: Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Wed Jul 09, 2014  06:23PM
+" Homepage: https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:37PM
 
 " Only do this when not yet done for this buffer
 if exists("b:did_ftplugin")
diff --git a/runtime/ftplugin/rmd.vim b/runtime/ftplugin/rmd.vim
index 55723ff..ec64a07 100644
--- a/runtime/ftplugin/rmd.vim
+++ b/runtime/ftplugin/rmd.vim
@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language: R help file
 " Maintainer: Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Wed Jul 09, 2014  06:23PM
+" Homepage: https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:37PM
 " Original work by Alex Zvoleff (adjusted for rmd by Michel Kuhlmann)
 
 " Only do this when not yet done for this buffer
diff --git a/runtime/ftplugin/rnoweb.vim b/runtime/ftplugin/rnoweb.vim
index baf53d0..e184399 100644
--- a/runtime/ftplugin/rnoweb.vim
+++ b/runtime/ftplugin/rnoweb.vim
@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language: Rnoweb
 " Maintainer: Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Wed Jul 09, 2014  06:23PM
+" Homepage: https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:37PM
 
 " Only do this when not yet done for this buffer
 if exists("b:did_ftplugin")
diff --git a/runtime/ftplugin/rrst.vim b/runtime/ftplugin/rrst.vim
index 8140169..ecfd6e8 100644
--- a/runtime/ftplugin/rrst.vim
+++ b/runtime/ftplugin/rrst.vim
@@ -1,7 +1,8 @@
 " Vim filetype plugin file
 " Language: reStructuredText documentation format with R code
 " Maintainer: Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Wed Jul 09, 2014  06:23PM
+" Homepage: https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:38PM
 " Original work by Alex Zvoleff
 
 " Only do this when not yet done for this buffer
diff --git a/runtime/indent/r.vim b/runtime/indent/r.vim
index 105f0cd..01f3812 100644
--- a/runtime/indent/r.vim
+++ b/runtime/indent/r.vim
@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	R
 " Author:	Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Thu Mar 26, 2015  05:36PM
+" Homepage:     https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Thu Feb 18, 2016  06:32AM
 
 
 " Only load this indent file when no other was loaded.
@@ -32,7 +33,7 @@
   let g:r_indent_ess_compatible = 0
 endif
 if ! exists("g:r_indent_op_pattern")
-  let g:r_indent_op_pattern = '\(+\|-\|\*\|/\|=\|\~\|%\)$'
+  let g:r_indent_op_pattern = '\(&\||\|+\|-\|\*\|/\|=\|\~\|%\|->\)\s*$'
 endif
 
 function s:RDelete_quotes(line)
@@ -265,7 +266,7 @@
     return 0
   endif
 
-  if cline =~ '^\s*{'
+  if cline =~ '^\s*{' && s:Get_paren_balance(cline, '{', '}') > 0
     if g:r_indent_ess_compatible && line =~ ')$'
       let nlnum = lnum
       let nline = line
@@ -283,7 +284,7 @@
   endif
 
   " line is an incomplete command:
-  if line =~ '\<\(if\|while\|for\|function\)\s*()$' || line =~ '\<else$' || line =~ '<-$'
+  if line =~ '\<\(if\|while\|for\|function\)\s*()$' || line =~ '\<else$' || line =~ '<-$' || line =~ '->$'
     return indent(lnum) + &sw
   endif
 
@@ -344,7 +345,7 @@
   endif
 
   let post_block = 0
-  if line =~ '}$'
+  if line =~ '}$' && s:Get_paren_balance(line, '{', '}') < 0
     let lnum = s:Get_matching_brace(lnum, '{', '}', 0)
     let line = SanitizeRLine(getline(lnum))
     if lnum > 0 && line =~ '^\s*{'
@@ -359,14 +360,14 @@
   let olnum = s:Get_prev_line(lnum)
   let oline = getline(olnum)
   if olnum > 0
-    if line =~ g:r_indent_op_pattern
-      if oline =~ g:r_indent_op_pattern
+    if line =~ g:r_indent_op_pattern && s:Get_paren_balance(line, "(", ")") == 0
+      if oline =~ g:r_indent_op_pattern && s:Get_paren_balance(line, "(", ")") == 0
         return indent(lnum)
       else
         return indent(lnum) + &sw
       endif
     else
-      if oline =~ g:r_indent_op_pattern
+      if oline =~ g:r_indent_op_pattern && s:Get_paren_balance(line, "(", ")") == 0
         return indent(lnum) - &sw
       endif
     endif
@@ -471,7 +472,6 @@
   endif
 
   let ind = indent(lnum)
-  let pind = indent(plnum)
 
   if g:r_indent_align_args == 0 && pb != 0
     let ind += pb * &sw
@@ -483,6 +483,12 @@
     return ind
   endif
 
+  if plnum > 0
+    let pind = indent(plnum)
+  else
+    let pind = 0
+  endif
+
   if ind == pind || (ind == (pind  + &sw) && pline =~ '{$' && ppost_else == 0)
     return ind
   endif
diff --git a/runtime/indent/rhelp.vim b/runtime/indent/rhelp.vim
index 3b37128..9dc2031 100644
--- a/runtime/indent/rhelp.vim
+++ b/runtime/indent/rhelp.vim
@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	R Documentation (Help), *.Rd
 " Author:	Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Thu Oct 16, 2014  07:07AM
+" Homepage:     https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:38PM
 
 
 " Only load this indent file when no other was loaded.
diff --git a/runtime/indent/rmd.vim b/runtime/indent/rmd.vim
index 9a8a3cb..8890440 100644
--- a/runtime/indent/rmd.vim
+++ b/runtime/indent/rmd.vim
@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	Rmd
 " Author:	Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Thu Jul 10, 2014  07:11PM
+" Homepage:     https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:38PM
 
 
 " Only load this indent file when no other was loaded.
diff --git a/runtime/indent/rnoweb.vim b/runtime/indent/rnoweb.vim
index d0cad3d..29fa5bc 100644
--- a/runtime/indent/rnoweb.vim
+++ b/runtime/indent/rnoweb.vim
@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	Rnoweb
 " Author:	Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Sun Mar 22, 2015  09:28AM
+" Homepage:     https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:38PM
 
 
 " Only load this indent file when no other was loaded.
diff --git a/runtime/indent/rrst.vim b/runtime/indent/rrst.vim
index 8bfa834..f3ee53e 100644
--- a/runtime/indent/rrst.vim
+++ b/runtime/indent/rrst.vim
@@ -1,7 +1,8 @@
 " Vim indent file
 " Language:	Rrst
 " Author:	Jakson Alves de Aquino <jalvesaq@gmail.com>
-" Last Change:	Wed Jul 09, 2014  07:33PM
+" Homepage:     https://github.com/jalvesaq/R-Vim-runtime
+" Last Change:	Tue Apr 07, 2015  04:38PM
 
 
 " Only load this indent file when no other was loaded.
diff --git a/runtime/syntax/python.vim b/runtime/syntax/python.vim
index 6161eb3..68979a8 100644
--- a/runtime/syntax/python.vim
+++ b/runtime/syntax/python.vim
@@ -1,7 +1,7 @@
 " Vim syntax file
 " Language:	Python
 " Maintainer:	Zvezdan Petkovic <zpetkovic@acm.org>
-" Last Change:	2015 Sep 15
+" Last Change:	2016 Feb 20
 " Credits:	Neil Schemenauer <nas@python.ca>
 "		Dmitry Vasiliev
 "
@@ -199,6 +199,8 @@
   syn keyword pythonBuiltin	ascii bytes exec
   " non-essential built-in functions; Python 2 only
   syn keyword pythonBuiltin	apply buffer coerce intern
+  " avoid highlighting attributes as builtins
+  syn match   pythonAttribute	/\.\h\w*/hs=s+1 contains=ALLBUT,pythonBuiltin transparent
 endif
 
 " From the 'Python Library Reference' class hierarchy at the bottom.
diff --git a/runtime/syntax/r.vim b/runtime/syntax/r.vim
index e48b668..d96bf96 100644
--- a/runtime/syntax/r.vim
+++ b/runtime/syntax/r.vim
@@ -5,17 +5,21 @@
 " 		      Tom Payne <tom@tompayne.org>
 " Contributor:        Johannes Ranke <jranke@uni-bremen.de>
 " Homepage:           https://github.com/jalvesaq/R-Vim-runtime
-" Last Change:	      Wed Oct 21, 2015  06:33AM
+" Last Change:	      Thu Mar 10, 2016  12:26PM
 " Filenames:	      *.R *.r *.Rhistory *.Rt
 "
 " NOTE: The highlighting of R functions is defined in
 " runtime files created by a filetype plugin, if installed.
 "
 " CONFIGURATION:
-"   syntax folding can be turned on by
+"   Syntax folding can be turned on by
 "
 "      let r_syntax_folding = 1
 "
+"   ROxygen highlighting can be turned off by
+"
+"      let r_hl_roxygen = 0
+"
 " Some lines of code were borrowed from Zhuojun Chen.
 
 if exists("b:current_syntax")
@@ -24,9 +28,12 @@
 
 setlocal iskeyword=@,48-57,_,.
 
-if exists("g:r_syntax_folding")
+if exists("g:r_syntax_folding") && g:r_syntax_folding
   setlocal foldmethod=syntax
 endif
+if !exists("g:r_hl_roxygen")
+  let g:r_hl_roxygen = 1
+endif
 
 syn case match
 
@@ -35,18 +42,20 @@
 syn match rComment contains=@Spell,rCommentTodo,rOBlock "#.*"
 
 " Roxygen
-syn region rOBlock start="^\s*\n#\{1,2}' " start="\%^#\{1,2}' " end="^\(#\{1,2}'\)\@!" contains=rOTitle,rOKeyword,rOExamples,@Spell keepend
-syn region rOTitle start="^\s*\n#\{1,2}' " start="\%^#\{1,2}' " end="^\(#\{1,2}'\s*$\)\@=" contained contains=rOCommentKey
-syn match rOCommentKey "#\{1,2}'" containedin=rOTitle contained
+if g:r_hl_roxygen
+  syn region rOBlock start="^\s*\n#\{1,2}' " start="\%^#\{1,2}' " end="^\(#\{1,2}'\)\@!" contains=rOTitle,rOKeyword,rOExamples,@Spell keepend
+  syn region rOTitle start="^\s*\n#\{1,2}' " start="\%^#\{1,2}' " end="^\(#\{1,2}'\s*$\)\@=" contained contains=rOCommentKey
+  syn match rOCommentKey "#\{1,2}'" containedin=rOTitle contained
 
-syn region rOExamples start="^#\{1,2}' @examples.*"rs=e+1,hs=e+1 end="^\(#\{1,2}' @.*\)\@=" end="^\(#\{1,2}'\)\@!" contained contains=rOKeyword
+  syn region rOExamples start="^#\{1,2}' @examples.*"rs=e+1,hs=e+1 end="^\(#\{1,2}' @.*\)\@=" end="^\(#\{1,2}'\)\@!" contained contains=rOKeyword
 
-syn match rOKeyword contained "@\(param\|return\|name\|rdname\|examples\|example\|include\|docType\)"
-syn match rOKeyword contained "@\(S3method\|TODO\|aliases\|alias\|assignee\|author\|callGraphDepth\|callGraph\)"
-syn match rOKeyword contained "@\(callGraphPrimitives\|concept\|exportClass\|exportMethod\|exportPattern\|export\|formals\)"
-syn match rOKeyword contained "@\(format\|importClassesFrom\|importFrom\|importMethodsFrom\|import\|keywords\|useDynLib\)"
-syn match rOKeyword contained "@\(method\|noRd\|note\|references\|seealso\|setClass\|slot\|source\|title\|usage\)"
-syn match rOKeyword contained "@\(family\|template\|templateVar\|description\|details\|inheritParams\|field\)"
+  syn match rOKeyword contained "@\(param\|return\|name\|rdname\|examples\|example\|include\|docType\)"
+  syn match rOKeyword contained "@\(S3method\|TODO\|aliases\|alias\|assignee\|author\|callGraphDepth\|callGraph\)"
+  syn match rOKeyword contained "@\(callGraphPrimitives\|concept\|exportClass\|exportMethod\|exportPattern\|export\|formals\)"
+  syn match rOKeyword contained "@\(format\|importClassesFrom\|importFrom\|importMethodsFrom\|import\|keywords\|useDynLib\)"
+  syn match rOKeyword contained "@\(method\|noRd\|note\|references\|seealso\|setClass\|slot\|source\|title\|usage\)"
+  syn match rOKeyword contained "@\(family\|template\|templateVar\|description\|details\|inheritParams\|field\)"
+endif
 
 
 if &filetype == "rhelp"
@@ -159,12 +168,13 @@
 syn match rCurlyError "[)\]]" contained
 syn match rParenError "[\]}]" contained
 
-" Source list of R functions produced by a filetype plugin (if installed)
-if has("nvim")
-  " Nvim-R
+if !exists("g:R_hi_fun")
+  let g:R_hi_fun = 1
+endif
+if g:R_hi_fun
+  " Nvim-R:
   runtime R/functions.vim
-else
-  " Vim-R-plugin
+  " Vim-R-plugin:
   runtime r-plugin/functions.vim
 endif
 
@@ -235,11 +245,13 @@
 hi def link rString      String
 hi def link rStrError    Error
 hi def link rType        Type
-hi def link rOKeyword    Title
-hi def link rOBlock      Comment
-hi def link rOTitle      Title
-hi def link rOCommentKey Comment
-hi def link rOExamples   SpecialComment
+if g:r_hl_roxygen
+  hi def link rOKeyword    Title
+  hi def link rOBlock      Comment
+  hi def link rOTitle      Title
+  hi def link rOCommentKey Comment
+  hi def link rOExamples   SpecialComment
+endif
 
 
 let b:current_syntax="r"
diff --git a/runtime/syntax/rhelp.vim b/runtime/syntax/rhelp.vim
index 32c91ad..47c764e 100644
--- a/runtime/syntax/rhelp.vim
+++ b/runtime/syntax/rhelp.vim
@@ -2,25 +2,21 @@
 " Language:    R Help File
 " Maintainer: Jakson Aquino <jalvesaq@gmail.com>
 " Former Maintainer: Johannes Ranke <jranke@uni-bremen.de>
-" Last Change: Wed Jul 09, 2014  10:28PM
+" Homepage: https://github.com/jalvesaq/R-Vim-runtime
+" Last Change: Sat Feb 06, 2016  11:34AM
 " Remarks:     - Includes R syntax highlighting in the appropriate
 "                sections if an r.vim file is in the same directory or in the
 "                default debian location.
 "              - There is no Latex markup in equations
 "              - Thanks to Will Gray for finding and fixing a bug
-"              - No support for \if, \ifelse and \out as I don't understand
-"                them and have no examples at hand (help welcome).
-"              - No support for \var tag within quoted string (dito)
+"              - No support for \var tag within quoted string
 
 " Version Clears: {{{1
-" For version 5.x: Clear all syntax items
-" For version 6.x and 7.x: Quit when a syntax file was already loaded
-if version < 600 
-  syntax clear
-elseif exists("b:current_syntax")
+if exists("b:current_syntax")
   finish
 endif 
 
+scriptencoding utf-8
 setlocal iskeyword=@,48-57,_,.
 
 syn case match
@@ -29,9 +25,11 @@
 syn region rhelpIdentifier matchgroup=rhelpSection	start="\\name{" end="}" 
 syn region rhelpIdentifier matchgroup=rhelpSection	start="\\alias{" end="}" 
 syn region rhelpIdentifier matchgroup=rhelpSection	start="\\pkg{" end="}" contains=rhelpLink
+syn region rhelpIdentifier matchgroup=rhelpSection	start="\\CRANpkg{" end="}" contains=rhelpLink
 syn region rhelpIdentifier matchgroup=rhelpSection start="\\method{" end="}" contained
 syn region rhelpIdentifier matchgroup=rhelpSection start="\\Rdversion{" end="}"
 
+
 " Highlighting of R code using an existing r.vim syntax file if available {{{1
 syn include @R syntax/r.vim
 
@@ -69,76 +67,115 @@
 syn match rhelpDelimiter		"\\tab "
 
 " Keywords {{{1
-syn match rhelpKeyword	"\\R"
-syn match rhelpKeyword	"\\ldots"
+syn match rhelpKeyword	"\\R\>"
+syn match rhelpKeyword	"\\ldots\>"
+syn match rhelpKeyword	"\\sspace\>"
 syn match rhelpKeyword  "--"
 syn match rhelpKeyword  "---"
-syn match rhelpKeyword  "<"
-syn match rhelpKeyword  ">"
-syn match rhelpKeyword	"\\ge"
-syn match rhelpKeyword	"\\le"
-syn match rhelpKeyword	"\\alpha"
-syn match rhelpKeyword	"\\beta"
-syn match rhelpKeyword	"\\gamma"
-syn match rhelpKeyword	"\\delta"
-syn match rhelpKeyword	"\\epsilon"
-syn match rhelpKeyword	"\\zeta"
-syn match rhelpKeyword	"\\eta"
-syn match rhelpKeyword	"\\theta"
-syn match rhelpKeyword	"\\iota"
-syn match rhelpKeyword	"\\kappa"
-syn match rhelpKeyword	"\\lambda"
-syn match rhelpKeyword	"\\mu"
-syn match rhelpKeyword	"\\nu"
-syn match rhelpKeyword	"\\xi"
-syn match rhelpKeyword	"\\omicron"
-syn match rhelpKeyword	"\\pi"
-syn match rhelpKeyword	"\\rho"
-syn match rhelpKeyword	"\\sigma"
-syn match rhelpKeyword	"\\tau"
-syn match rhelpKeyword	"\\upsilon"
-syn match rhelpKeyword	"\\phi"
-syn match rhelpKeyword	"\\chi"
-syn match rhelpKeyword	"\\psi"
-syn match rhelpKeyword	"\\omega"
-syn match rhelpKeyword	"\\Alpha"
-syn match rhelpKeyword	"\\Beta"
-syn match rhelpKeyword	"\\Gamma"
-syn match rhelpKeyword	"\\Delta"
-syn match rhelpKeyword	"\\Epsilon"
-syn match rhelpKeyword	"\\Zeta"
-syn match rhelpKeyword	"\\Eta"
-syn match rhelpKeyword	"\\Theta"
-syn match rhelpKeyword	"\\Iota"
-syn match rhelpKeyword	"\\Kappa"
-syn match rhelpKeyword	"\\Lambda"
-syn match rhelpKeyword	"\\Mu"
-syn match rhelpKeyword	"\\Nu"
-syn match rhelpKeyword	"\\Xi"
-syn match rhelpKeyword	"\\Omicron"
-syn match rhelpKeyword	"\\Pi"
-syn match rhelpKeyword	"\\Rho"
-syn match rhelpKeyword	"\\Sigma"
-syn match rhelpKeyword	"\\Tau"
-syn match rhelpKeyword	"\\Upsilon"
-syn match rhelpKeyword	"\\Phi"
-syn match rhelpKeyword	"\\Chi"
-syn match rhelpKeyword	"\\Psi"
-syn match rhelpKeyword	"\\Omega"
+
+" Condition Keywords {{{2
+syn match rhelpKeyword	"\\if\>"
+syn match rhelpKeyword	"\\ifelse\>"
+syn match rhelpKeyword	"\\out\>"
+" Examples of usage:
+" \ifelse{latex}{\eqn{p = 5 + 6 - 7 \times 8}}{\eqn{p = 5 + 6 - 7 * 8}}
+" \ifelse{latex}{\out{$\alpha$}}{\ifelse{html}{\out{&alpha;}}{alpha}}
+
+" Keywords and operators valid only if in math mode {{{2
+syn match rhelpMathOp  "<" contained
+syn match rhelpMathOp  ">" contained
+syn match rhelpMathOp  "+" contained
+syn match rhelpMathOp  "-" contained
+syn match rhelpMathOp  "=" contained
+
+" Conceal function based on syntax/tex.vim {{{2
+if exists("g:tex_conceal")
+  let s:tex_conceal = g:tex_conceal
+else
+  let s:tex_conceal = 'gm'
+endif
+function s:HideSymbol(pat, cchar, hide)
+  if a:hide
+    exe "syn match rhelpMathSymb '" . a:pat . "' contained conceal cchar=" . a:cchar
+  else
+    exe "syn match rhelpMathSymb '" . a:pat . "' contained"
+  endif
+endfunction
+
+" Math symbols {{{2
+if s:tex_conceal =~ 'm'
+  let s:hd = 1
+else
+  let s:hd = 0
+endif
+call s:HideSymbol('\\infty\>',  '∞', s:hd)
+call s:HideSymbol('\\ge\>',     '≥', s:hd)
+call s:HideSymbol('\\le\>',     '≤', s:hd)
+call s:HideSymbol('\\prod\>',   '∏', s:hd)
+call s:HideSymbol('\\sum\>',    '∑', s:hd)
+syn match rhelpMathSymb   	"\\sqrt\>" contained
+
+" Greek letters {{{2
+if s:tex_conceal =~ 'g'
+  let s:hd = 1
+else
+  let s:hd = 0
+endif
+call s:HideSymbol('\\alpha\>',    'α', s:hd)
+call s:HideSymbol('\\beta\>',     'β', s:hd)
+call s:HideSymbol('\\gamma\>',    'γ', s:hd)
+call s:HideSymbol('\\delta\>',    'δ', s:hd)
+call s:HideSymbol('\\epsilon\>',  'ϵ', s:hd)
+call s:HideSymbol('\\zeta\>',     'ζ', s:hd)
+call s:HideSymbol('\\eta\>',      'η', s:hd)
+call s:HideSymbol('\\theta\>',    'θ', s:hd)
+call s:HideSymbol('\\iota\>',     'ι', s:hd)
+call s:HideSymbol('\\kappa\>',    'κ', s:hd)
+call s:HideSymbol('\\lambda\>',   'λ', s:hd)
+call s:HideSymbol('\\mu\>',       'μ', s:hd)
+call s:HideSymbol('\\nu\>',       'ν', s:hd)
+call s:HideSymbol('\\xi\>',       'ξ', s:hd)
+call s:HideSymbol('\\pi\>',       'π', s:hd)
+call s:HideSymbol('\\rho\>',      'ρ', s:hd)
+call s:HideSymbol('\\sigma\>',    'σ', s:hd)
+call s:HideSymbol('\\tau\>',      'τ', s:hd)
+call s:HideSymbol('\\upsilon\>',  'υ', s:hd)
+call s:HideSymbol('\\phi\>',      'ϕ', s:hd)
+call s:HideSymbol('\\chi\>',      'χ', s:hd)
+call s:HideSymbol('\\psi\>',      'ψ', s:hd)
+call s:HideSymbol('\\omega\>',    'ω', s:hd)
+call s:HideSymbol('\\Gamma\>',    'Γ', s:hd)
+call s:HideSymbol('\\Delta\>',    'Δ', s:hd)
+call s:HideSymbol('\\Theta\>',    'Θ', s:hd)
+call s:HideSymbol('\\Lambda\>',   'Λ', s:hd)
+call s:HideSymbol('\\Xi\>',       'Ξ', s:hd)
+call s:HideSymbol('\\Pi\>',       'Π', s:hd)
+call s:HideSymbol('\\Sigma\>',    'Σ', s:hd)
+call s:HideSymbol('\\Upsilon\>',  'Υ', s:hd)
+call s:HideSymbol('\\Phi\>',      'Φ', s:hd)
+call s:HideSymbol('\\Psi\>',      'Ψ', s:hd)
+call s:HideSymbol('\\Omega\>',    'Ω', s:hd)
+delfunction s:HideSymbol
+" Note: The letters 'omicron', 'Alpha', 'Beta', 'Epsilon', 'Zeta', 'Eta',
+" 'Iota', 'Kappa', 'Mu', 'Nu', 'Omicron', 'Rho', 'Tau' and 'Chi' are listed
+" at src/library/tools/R/Rd2txt.R because they are valid in HTML, although
+" they do not make valid LaTeX code (e.g. &Alpha; versus \Alpha).
 
 " Links {{{1
-syn region rhelpLink matchgroup=rhelpSection start="\\link{" end="}" contained keepend extend
-syn region rhelpLink matchgroup=rhelpSection start="\\link\[.\{-}\]{" end="}" contained keepend extend
-syn region rhelpLink matchgroup=rhelpSection start="\\linkS4class{" end="}" contained keepend extend
+syn region rhelpLink matchgroup=rhelpType start="\\link{" end="}" contained keepend extend
+syn region rhelpLink matchgroup=rhelpType start="\\link\[.\{-}\]{" end="}" contained keepend extend
+syn region rhelpLink matchgroup=rhelpType start="\\linkS4class{" end="}" contained keepend extend
+syn region rhelpLink matchgroup=rhelpType start="\\url{" end="}" contained keepend extend
+syn region rhelpLink matchgroup=rhelpType start="\\href{" end="}" contained keepend extend
+syn region rhelpLink matchgroup=rhelpType start="\\figure{" end="}" contained keepend extend
 
 " Verbatim like {{{1
-if v:version > 703
-  syn region rhelpVerbatim matchgroup=rhelpType start="\\samp{" skip='\\\@1<!{.\{-}\\\@1<!}' end="}" contains=rhelpSpecialChar,rhelpComment
-  syn region rhelpVerbatim matchgroup=rhelpType start="\\verb{" skip='\\\@1<!{.\{-}\\\@1<!}' end="}" contains=rhelpSpecialChar,rhelpComment
-else
-  syn region rhelpVerbatim matchgroup=rhelpType start="\\samp{" skip='\\\@<!{.\{-}\\\@<!}' end="}" contains=rhelpSpecialChar,rhelpComment
-  syn region rhelpVerbatim matchgroup=rhelpType start="\\verb{" skip='\\\@<!{.\{-}\\\@<!}' end="}" contains=rhelpSpecialChar,rhelpComment
-endif
+syn region rhelpVerbatim matchgroup=rhelpType start="\\samp{" skip='\\\@1<!{.\{-}\\\@1<!}' end="}" contains=rhelpSpecialChar,rhelpComment
+syn region rhelpVerbatim matchgroup=rhelpType start="\\verb{" skip='\\\@1<!{.\{-}\\\@1<!}' end="}" contains=rhelpSpecialChar,rhelpComment
+
+" Equation {{{1
+syn region rhelpEquation matchgroup=rhelpType start="\\eqn{" skip='\\\@1<!{.\{-}\\\@1<!}' end="}" contains=rhelpMathSymb,rhelpMathOp,rhelpRegion contained keepend extend
+syn region rhelpEquation matchgroup=rhelpType start="\\deqn{" skip='\\\@1<!{.\{-}\\\@1<!}' end="}" contains=rhelpMathSymb,rhelpMathOp,rhelpRegion contained keepend extend
 
 " Type Styles {{{1
 syn match rhelpType		"\\emph\>"
@@ -148,12 +185,9 @@
 syn match rhelpType		"\\dQuote\>"
 syn match rhelpType		"\\preformatted\>"
 syn match rhelpType		"\\kbd\>"
-syn match rhelpType		"\\eqn\>"
-syn match rhelpType		"\\deqn\>"
 syn match rhelpType		"\\file\>"
 syn match rhelpType		"\\email\>"
-syn match rhelpType		"\\url\>"
-syn match rhelpType		"\\href\>"
+syn match rhelpType		"\\enc\>"
 syn match rhelpType		"\\var\>"
 syn match rhelpType		"\\env\>"
 syn match rhelpType		"\\option\>"
@@ -163,6 +197,7 @@
 syn match rhelpType		"\\dfn\>"
 syn match rhelpType		"\\cite\>"
 syn match rhelpType		"\\acronym\>"
+syn match rhelpType		"\\doi\>"
 
 " rhelp sections {{{1
 syn match rhelpSection		"\\encoding\>"
@@ -202,9 +237,9 @@
 syn match rhelpComment /%.*$/
 
 " Error {{{1
-syn region rhelpRegion matchgroup=Delimiter start=/(/ matchgroup=Delimiter end=/)/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim
-syn region rhelpRegion matchgroup=Delimiter start=/{/ matchgroup=Delimiter end=/}/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim
-syn region rhelpRegion matchgroup=Delimiter start=/\[/ matchgroup=Delimiter end=/]/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim
+syn region rhelpRegion matchgroup=Delimiter start=/(/ matchgroup=Delimiter end=/)/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim,rhelpEquation
+syn region rhelpRegion matchgroup=Delimiter start=/{/ matchgroup=Delimiter end=/}/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim,rhelpEquation
+syn region rhelpRegion matchgroup=Delimiter start=/\[/ matchgroup=Delimiter end=/]/ contains=@Spell,rhelpCodeSpecial,rhelpComment,rhelpDelimiter,rhelpDots,rhelpFreesec,rhelpFreesubsec,rhelpIdentifier,rhelpKeyword,rhelpLink,rhelpPreProc,rhelpRComment,rhelpRcode,rhelpRegion,rhelpS4method,rhelpSection,rhelpSexpr,rhelpSpecialChar,rhelpString,rhelpType,rhelpVerbatim,rhelpEquation
 syn match rhelpError      /[)\]}]/
 syn match rhelpBraceError /[)}]/ contained
 syn match rhelpCurlyError /[)\]]/ contained
@@ -213,36 +248,27 @@
 syntax sync match rhelpSyncRcode grouphere rhelpRcode "\\examples{"
 
 " Define the default highlighting {{{1
-" For version 5.7 and earlier: only when not done already
-" For version 5.8 and later: only when an item doesn't have highlighting yet
-if version >= 508 || !exists("did_rhelp_syntax_inits")
-  if version < 508
-    let did_rhelp_syntax_inits = 1
-    command -nargs=+ HiLink hi link <args>
-  else
-    command -nargs=+ HiLink hi def link <args>
-  endif
-  HiLink rhelpVerbatim    String
-  HiLink rhelpDelimiter   Delimiter
-  HiLink rhelpIdentifier  Identifier
-  HiLink rhelpString      String
-  HiLink rhelpCodeSpecial Special
-  HiLink rhelpKeyword     Keyword
-  HiLink rhelpDots        Keyword
-  HiLink rhelpLink        Underlined
-  HiLink rhelpType        Type
-  HiLink rhelpSection     PreCondit
-  HiLink rhelpError       Error
-  HiLink rhelpBraceError  Error
-  HiLink rhelpCurlyError  Error
-  HiLink rhelpParenError  Error
-  HiLink rhelpPreProc     PreProc
-  HiLink rhelpDelimiter   Delimiter
-  HiLink rhelpComment     Comment
-  HiLink rhelpRComment    Comment
-  HiLink rhelpSpecialChar SpecialChar
-  delcommand HiLink
-endif 
+hi def link rhelpVerbatim    String
+hi def link rhelpDelimiter   Delimiter
+hi def link rhelpIdentifier  Identifier
+hi def link rhelpString      String
+hi def link rhelpCodeSpecial Special
+hi def link rhelpKeyword     Keyword
+hi def link rhelpDots        Keyword
+hi def link rhelpLink        Underlined
+hi def link rhelpType        Type
+hi def link rhelpSection     PreCondit
+hi def link rhelpError       Error
+hi def link rhelpBraceError  Error
+hi def link rhelpCurlyError  Error
+hi def link rhelpParenError  Error
+hi def link rhelpPreProc     PreProc
+hi def link rhelpDelimiter   Delimiter
+hi def link rhelpComment     Comment
+hi def link rhelpRComment    Comment
+hi def link rhelpSpecialChar SpecialChar
+hi def link rhelpMathSymb    Special
+hi def link rhelpMathOp      Operator
 
 let   b:current_syntax = "rhelp"
 
diff --git a/runtime/syntax/rmd.vim b/runtime/syntax/rmd.vim
index 6f1b847..4cde744 100644
--- a/runtime/syntax/rmd.vim
+++ b/runtime/syntax/rmd.vim
@@ -1,15 +1,13 @@
 " markdown Text with R statements
 " Language: markdown with R code chunks
-" Last Change: Wed Jul 09, 2014  10:29PM
+" Homepage: https://github.com/jalvesaq/R-Vim-runtime
+" Last Change: Sat Feb 06, 2016  06:45AM
 "
 " CONFIGURATION:
 "   To highlight chunk headers as R code, put in your vimrc:
 "   let rmd_syn_hl_chunk = 1
 
-" for portability
-if version < 600
-  syntax clear
-elseif exists("b:current_syntax")
+if exists("b:current_syntax")
   finish
 endif
 
@@ -58,6 +56,8 @@
   if exists("b:current_syntax")
     unlet b:current_syntax
   endif
+  " Extend cluster
+  syn cluster texMathZoneGroup add=rmdrInline
   " Inline
   syntax match rmdLaTeXInlDelim "\$"
   syntax match rmdLaTeXInlDelim "\\\$"
diff --git a/runtime/syntax/rnoweb.vim b/runtime/syntax/rnoweb.vim
index 7d42395..665acc5 100644
--- a/runtime/syntax/rnoweb.vim
+++ b/runtime/syntax/rnoweb.vim
@@ -1,20 +1,14 @@
 " Vim syntax file
 " Language:    R noweb Files
 " Maintainer:  Johannes Ranke <jranke@uni-bremen.de>
-" Last Change: 2009 May 05
-" Version:     0.9
-" SVN:	       $Id: rnoweb.vim 84 2009-05-03 19:52:47Z ranke $
+" Last Change: Sat Feb 06, 2016  06:47AM
+" Version:     0.9.1
 " Remarks:     - This file is inspired by the proposal of 
-"				 Fernando Henrique Ferraz Pereira da Rosa <feferraz@ime.usp.br>
-"			     http://www.ime.usp.br/~feferraz/en/sweavevim.html
+"                Fernando Henrique Ferraz Pereira da Rosa <feferraz@ime.usp.br>
+"                http://www.ime.usp.br/~feferraz/en/sweavevim.html
 "
 
-" Version Clears: {{{1
-" For version 5.x: Clear all syntax items
-" For version 6.x and 7.x: Quit when a syntax file was already loaded
-if version < 600 
-  syntax clear
-elseif exists("b:current_syntax")
+if exists("b:current_syntax")
   finish
 endif 
 
@@ -26,21 +20,22 @@
 
 syn cluster texMatchGroup add=@rnoweb
 syn cluster texMathMatchGroup add=rnowebSexpr
+syn cluster texMathZoneGroup add=rnowebSexpr
 syn cluster texEnvGroup add=@rnoweb
 syn cluster texFoldGroup add=@rnoweb
-syn cluster texDocGroup		add=@rnoweb
-syn cluster texPartGroup		add=@rnoweb
-syn cluster texChapterGroup		add=@rnoweb
-syn cluster texSectionGroup		add=@rnoweb
-syn cluster texSubSectionGroup		add=@rnoweb
-syn cluster texSubSubSectionGroup	add=@rnoweb
-syn cluster texParaGroup		add=@rnoweb
+syn cluster texDocGroup add=@rnoweb
+syn cluster texPartGroup add=@rnoweb
+syn cluster texChapterGroup add=@rnoweb
+syn cluster texSectionGroup add=@rnoweb
+syn cluster texSubSectionGroup add=@rnoweb
+syn cluster texSubSubSectionGroup add=@rnoweb
+syn cluster texParaGroup add=@rnoweb
 
 " Highlighting of R code using an existing r.vim syntax file if available {{{1
 syn include @rnowebR syntax/r.vim
 syn region rnowebChunk matchgroup=rnowebDelimiter start="^<<.*>>=" matchgroup=rnowebDelimiter end="^@" contains=@rnowebR,rnowebChunkReference,rnowebChunk fold keepend
 syn match rnowebChunkReference "^<<.*>>$" contained
-syn region rnowebSexpr matchgroup=Delimiter start="\\Sexpr{" matchgroup=Delimiter end="}" contains=@rnowebR
+syn region rnowebSexpr matchgroup=Delimiter start="\\Sexpr{" matchgroup=Delimiter end="}" contains=@rnowebR contained
 
 " Sweave options command {{{1
 syn region rnowebSweaveopts matchgroup=Delimiter start="\\SweaveOpts{" matchgroup=Delimiter end="}"
diff --git a/runtime/syntax/rrst.vim b/runtime/syntax/rrst.vim
index 4667b3a..24d3844 100644
--- a/runtime/syntax/rrst.vim
+++ b/runtime/syntax/rrst.vim
@@ -1,16 +1,14 @@
 " reStructured Text with R statements
 " Language: reST with R code chunks
 " Maintainer: Alex Zvoleff, azvoleff@mail.sdsu.edu
-" Last Change: Wed Jul 09, 2014  10:29PM
+" Homepage: https://github.com/jalvesaq/R-Vim-runtime
+" Last Change: Sat Feb 06, 2016  06:45AM
 "
 " CONFIGURATION:
 "   To highlight chunk headers as R code, put in your vimrc:
 "   let rrst_syn_hl_chunk = 1
 
-" for portability
-if version < 600
-  syntax clear
-elseif exists("b:current_syntax")
+if exists("b:current_syntax")
   finish
 endif
 
diff --git a/runtime/syntax/vhdl.vim b/runtime/syntax/vhdl.vim
index 044ef83..3250382 100644
--- a/runtime/syntax/vhdl.vim
+++ b/runtime/syntax/vhdl.vim
@@ -54,37 +54,37 @@
 
 " Types and type qualifiers
 " Predefined standard VHDL types
-syn match	vhdlType	"bit[\']*"
-syn match	vhdlType	"boolean[\']*"
-syn match	vhdlType	"natural[\']*"
-syn match	vhdlType	"positive[\']*"
-syn match	vhdlType	"integer[\']*"
-syn match	vhdlType	"real[\']*"
-syn match	vhdlType	"time[\']*"
+syn match	vhdlType	"\<bit\>\'\="
+syn match	vhdlType	"\<boolean\>\'\="
+syn match	vhdlType	"\<natural\>\'\="
+syn match	vhdlType	"\<positive\>\'\="
+syn match	vhdlType	"\<integer\>\'\="
+syn match	vhdlType	"\<real\>\'\="
+syn match	vhdlType	"\<time\>\'\="
 
-syn match	vhdlType	"bit_vector[\']*"
-syn match	vhdlType	"boolean_vector[\']*"
-syn match	vhdlType	"integer_vector[\']*"
-syn match	vhdlType	"real_vector[\']*"
-syn match	vhdlType	"time_vector[\']*"
+syn match	vhdlType	"\<bit_vector\>\'\="
+syn match	vhdlType	"\<boolean_vector\>\'\="
+syn match	vhdlType	"\<integer_vector\>\'\="
+syn match	vhdlType	"\<real_vector\>\'\="
+syn match	vhdlType	"\<time_vector\>\'\="
 
-syn match	vhdlType	"character[\']*"
-syn match	vhdlType	"string[\']*"
+syn match	vhdlType	"\<character\>\'\="
+syn match	vhdlType	"\<string\>\'\="
 "syn keyword	vhdlType	severity_level
-syn match	vhdlType	"line[\']*"
-syn match	vhdlType	"text[\']*"
+syn keyword	vhdlType	line
+syn keyword	vhdlType	text
 
 " Predefined standard IEEE VHDL types
-syn match	vhdlType	"std_ulogic[\']*"
-syn match	vhdlType	"std_logic[\']*"
-syn match	vhdlType	"std_ulogic_vector[\']*"
-syn match	vhdlType	"std_logic_vector[\']*"
-syn match	vhdlType	"unresolved_signed[\']*"
-syn match	vhdlType	"unresolved_unsigned[\']*"
-syn match	vhdlType	"u_signed[\']*"
-syn match	vhdlType	"u_unsigned[\']*"
-syn match	vhdlType	"signed[\']*"
-syn match	vhdlType	"unsigned[\']*"
+syn match	vhdlType	"\<std_ulogic\>\'\="
+syn match	vhdlType	"\<std_logic\>\'\="
+syn match	vhdlType	"\<std_ulogic_vector\>\'\="
+syn match	vhdlType	"\<std_logic_vector\>\'\="
+syn match	vhdlType	"\<unresolved_signed\>\'\="
+syn match	vhdlType	"\<unresolved_unsigned\>\'\="
+syn match	vhdlType	"\<u_signed\>\'\="
+syn match	vhdlType	"\<u_unsigned\>\'\="
+syn match	vhdlType	"\<signed\>\'\="
+syn match	vhdlType	"\<unsigned\>\'\="
 
 
 " array attributes