diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index c19a345..5d6a205 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -5797,6 +5797,8 @@
 				something readable.
 		  "save_last"	Number of the last file write.  Zero when no
 				write yet.
+		  "save_cur"	Number of the current position in the undo
+				tree.  
 		  "synced"	Non-zero when the last undo block was synced.
 				This happens when waiting from input from the
 				user.  See |undo-blocks|.
diff --git a/runtime/doc/undo.txt b/runtime/doc/undo.txt
index 1ed2ecd..d1433d5 100644
--- a/runtime/doc/undo.txt
+++ b/runtime/doc/undo.txt
@@ -145,6 +145,16 @@
 :earlier {N}s		Go to older text state about {N} seconds before.
 :earlier {N}m		Go to older text state about {N} minutes before.
 :earlier {N}h		Go to older text state about {N} hours before.
+:earlier {N}d		Go to older text state about {N} days before.
+
+:earlier {N}f		Go to older text state {N} file writes before.
+			When changes were made since the laste write
+			":earlier 1f" will revert the text to the state when
+			it was written.  Otherwise it will go to the write
+			before that.
+			When at the state of the first file write, or when
+			the file was not written, ":earlier 1f" will go to
+			before the first change.
 
 							*g+*
 g+			Go to newer text state.  With a count repeat that many
@@ -154,6 +164,11 @@
 :later {N}s		Go to newer text state about {N} seconds later.
 :later {N}m		Go to newer text state about {N} minutes later.
 :later {N}h		Go to newer text state about {N} hours later.
+:later {N}d		Go to newer text state about {N} days later.
+
+:later {N}f		Go to newer text state {N} file writes later.
+			When at the state of the last file write, ":later 1f"
+			will go to the newest text state.
 
 
 Note that text states will become unreachable when undo information is cleared
diff --git a/runtime/doc/usr_02.txt b/runtime/doc/usr_02.txt
index 2e49781..6cd4b4f 100644
--- a/runtime/doc/usr_02.txt
+++ b/runtime/doc/usr_02.txt
@@ -302,7 +302,7 @@
 
 The "U" command is a change by itself, which the "u" command undoes and CTRL-R
 redoes.  This might be a bit confusing.  Don't worry, with "u" and CTRL-R you
-can go to any of the situations you had.  More about that in section |32.1|.
+can go to any of the situations you had.  More about that in section |32.2|.
 
 ==============================================================================
 *02.6*	Other editing commands
diff --git a/runtime/doc/usr_32.txt b/runtime/doc/usr_32.txt
index 02669b0..e6cfd4d 100644
--- a/runtime/doc/usr_32.txt
+++ b/runtime/doc/usr_32.txt
@@ -9,16 +9,40 @@
 change you create a branch in the undo tree.  This text is about moving
 through the branches.
 
-|32.1|	Numbering changes
-|32.2|	Jumping around the tree
-|32.3|	Time travelling
+|32.1|	Undo up to a file write
+|32.2|	Numbering changes
+|32.3|	Jumping around the tree
+|32.4|	Time travelling
 
      Next chapter: |usr_40.txt|  Make new commands
  Previous chapter: |usr_31.txt|  Exploiting the GUI
 Table of contents: |usr_toc.txt|
 
 ==============================================================================
-*32.1*	Numbering changes
+*32.1*	Undo up to a file write
+
+Sometimes you make several changes, and then discover you want to go back to
+when you have last written the file.  You can do that with this command: >
+
+	:earlier 1f
+
+The "f" stands for "file" here.
+
+You can repeat this command to go further back in the past.  Or use a count
+diferent from 1 to go back faster.
+
+If you go back too far, go forward again with: >
+
+	:later 1f
+
+Note that these commands really work in time sequence.  This matters if you
+made changes after undoing some changes.  It's explained in the next section.
+
+Also note that we are talking about text writes here.  For writing the undo
+information in a file see |undo-persistence|.
+
+==============================================================================
+*32.2*	Numbering changes
 
 In section |02.5| we only discussed one line of undo/redo.  But it is also
 possible to branch off.  This happens when you undo a few changes and then
@@ -66,7 +90,7 @@
 when moving up in the tree, so that you know which change was just undone.
 
 ==============================================================================
-*32.2*	Jumping around the tree
+*32.3*	Jumping around the tree
 
 So how do you get to "one two" now?  You can use this command: >
 
@@ -114,7 +138,7 @@
 You can type a count before |g-| and |g+| to repeat them.
 
 ==============================================================================
-*32.3*	Time travelling
+*32.4*	Time travelling
 
 When you have been working on text for a while the tree grows to become big.
 Then you may want to go to the text of some minutes ago.
@@ -133,10 +157,10 @@
 	:earlier 10s
 
 Depending on how much time you took for the changes you end up at a certain
-position in the tree.  The |:earlier| command argument can be "m" for minutes
-and "h" for hours.  To go all the way back use a big number: >
+position in the tree.  The |:earlier| command argument can be "m" for minutes,
+"h" for hours and "d" for days.  To go all the way back use a big number: >
 
-	:earlier 10h
+	:earlier 100d
 
 To travel forward in time again use the |:later| command: >
 
@@ -144,6 +168,11 @@
 
 The arguments are "s", "m" and "h", just like with |:earlier|.
 
+If you want even more details, or want to manipulate the information, you can
+use the |undotree()| function.  To see what it returns: >
+
+	:echo undotree()
+
 ==============================================================================
 
 Next chapter: |usr_40.txt|  Make new commands
diff --git a/runtime/doc/usr_toc.txt b/runtime/doc/usr_toc.txt
index 63242e3..0e3460f 100644
--- a/runtime/doc/usr_toc.txt
+++ b/runtime/doc/usr_toc.txt
@@ -273,9 +273,10 @@
 		|31.5|	Various
 
 |usr_32.txt|  The undo tree
-		|32.1|	Numbering changes
-		|32.2|	Jumping around the tree
-		|32.3|	Time travelling
+		|32.1|	Undo up to a file write
+		|32.2|	Numbering changes
+		|32.3|	Jumping around the tree
+		|32.4|	Time travelling
 
 ==============================================================================
 Tuning Vim ~