Updated runtime files

This is a collection of various PRs from github that all require a minor
patch number:

1) https://github.com/vim/vim/pull/12612

    Do not conflate dictionary key with end of block

2) https://github.com/vim/vim/pull/12729:

    When saving and restoring 'undolevels', the constructs `&undolevels` and
    `:set undolevels` are problematic.

    The construct `&undolevels` reads an unpredictable value; it will be the
    local option value (if one has been set), or the global option value
    (otherwise), making it unsuitable for saving a value for later
    restoration.

    Similarly, if a local option value has been set for 'undolevels',
    temporarily modifying the option via `:set undolevels` changes the local
    value as well as the global value, requiring extra work to restore both
    values.

    Saving and restoring the option value in one step via the construct
    `:let &undolevels = &undolevels` appears to make no changes to the
    'undolevels' option, but if a local option has been set to a different
    value than the global option, it has the unintended effect of changing
    the global 'undolevels' value to the local value.

    Update the documentation to explain these issues and recommend explicit
    use of global and local option values when saving and restoring.  Update
    some unit tests to use `g:undolevels`.

3) https://github.com/vim/vim/pull/12702:

    Problem:    Pip requirements files are not recognized.
    Solution:   Add a pattern to match pip requirements files.

4) https://github.com/vim/vim/pull/12688:

    Add indent file and tests for ABB Rapid

5) https://github.com/vim/vim/pull/12668:

    Use Lua 5.1 numeric escapes in tests and add to CI

    Only Lua 5.2+ and LuaJIT understand hexadecimal escapes in strings.  Lua
    5.1 only supports decimal escapes:

    > A character in a string can also be specified by its numerical value
    > using the escape sequence \ddd, where ddd is a sequence of up to three
    > decimal digits. (Note that if a numerical escape is to be followed by a
    > digit, it must be expressed using exactly three digits.) Strings in Lua
    > can contain any 8-bit value, including embedded zeros, which can be
    > specified as '\0'.

    To make sure this works with Lua 5.4 and Lua 5.1 change the Vim CI to
    run with Lua 5.1 as well as Lua 5.4

6) https://github.com/vim/vim/pull/12631:

    Add hurl filetype detection

7) https://github.com/vim/vim/pull/12573:

    Problem:   Files for haskell persistent library are not recognized
    Solution:  Add pattern persistentmodels for haskell persistent library

closes: #12612
closes: #12729
closes: #12702
closes: #12688
closes: #12668
closes: #12631
closes: #12573

Co-authored-by: lacygoill <lacygoill@lacygoill.me>
Co-authored-by: Michael Henry <drmikehenry@drmikehenry.com>
Co-authored-by: ObserverOfTime <chronobserver@disroot.org>
Co-authored-by: KnoP-01 <knosowski@graeffrobotics.de>
Co-authored-by: James McCoy <jamessan@jamessan.com>
Co-authored-by: Jacob Pfeifer <jacob@pfeifer.dev>
Co-authored-by: Borys Lykah <lykahb@fastmail.com>
diff --git a/runtime/autoload/dist/vimindent.vim b/runtime/autoload/dist/vimindent.vim
index 1306d1e..a5e04a5 100644
--- a/runtime/autoload/dist/vimindent.vim
+++ b/runtime/autoload/dist/vimindent.vim
@@ -2,7 +2,7 @@
 
 # Language:     Vim script
 # Maintainer:   github user lacygoill
-# Last Change:  2023 Feb 01
+# Last Change:  2023 Jun 29
 
 # NOTE: Whenever you change the code, make sure the tests are still passing:
 #
@@ -112,10 +112,6 @@
     .. '\)'
     .. ':\%(\s\|$\)'
 
-# NOT_A_DICT_KEY {{{3
-
-const NOT_A_DICT_KEY: string = ':\@!'
-
 # END_OF_COMMAND {{{3
 
 const END_OF_COMMAND: string = $'\s*\%($\|||\@!\|{INLINE_COMMENT}\)'
@@ -197,13 +193,13 @@
     ldo\=\>!\=
     tabdo\=\>
     windo\>
-    au\%[tocmd]\>.*
-    com\%[mand]\>.*
+    au\%[tocmd]\>!\=.*
+    com\%[mand]\>!\=.*
     g\%[lobal]!\={PATTERN_DELIMITER}.*
     v\%[global]!\={PATTERN_DELIMITER}.*
 END
 
-const HIGHER_ORDER_COMMAND: string = $'\%(^\|{BAR_SEPARATION}\)\s*\<\%({patterns->join('\|')}\){NOT_A_DICT_KEY}'
+const HIGHER_ORDER_COMMAND: string = $'\%(^\|{BAR_SEPARATION}\)\s*\<\%({patterns->join('\|')}\)\%(\s\|$\)\@='
 
 # START_MIDDLE_END {{{3
 
@@ -254,7 +250,7 @@
         kwds->map((_, kwd: string) => kwd == ''
         ? ''
         : $'\%(^\|{BAR_SEPARATION}\|\<sil\%[ent]\|{HIGHER_ORDER_COMMAND}\)\s*'
-        .. $'\<\%({kwd}\)\>\%(\s*{OPERATOR}\)\@!'))
+        .. $'\<\%({kwd}\)\>\%(\s\|$\|!\)\@=\%(\s*{OPERATOR}\)\@!'))
 
 lockvar! START_MIDDLE_END
 
@@ -279,7 +275,7 @@
 
 const ENDS_BLOCK_OR_CLAUSE: string = '^\s*\%(' .. patterns->join('\|') .. $'\){END_OF_COMMAND}'
     .. $'\|^\s*cat\%[ch]\%(\s\+\({PATTERN_DELIMITER}\).*\1\)\={END_OF_COMMAND}'
-    .. $'\|^\s*elseif\=\>\%({OPERATOR}\)\@!'
+    .. $'\|^\s*elseif\=\>\%(\s\|$\)\@=\%(\s*{OPERATOR}\)\@!'
 
 # STARTS_NAMED_BLOCK {{{3
 
@@ -296,7 +292,7 @@
     endfor
 }
 
-const STARTS_NAMED_BLOCK: string = $'^\s*\%(sil\%[ent]\s\+\)\=\%({patterns->join('\|')}\)\>{NOT_A_DICT_KEY}'
+const STARTS_NAMED_BLOCK: string = $'^\s*\%(sil\%[ent]\s\+\)\=\%({patterns->join('\|')}\)\>\%(\s\|$\|!\)\@='
 
 # STARTS_CURLY_BLOCK {{{3
 
@@ -312,7 +308,7 @@
 
 # STARTS_FUNCTION {{{3
 
-const STARTS_FUNCTION: string = $'^\s*\%({MODIFIERS.def}\)\=def\>{NOT_A_DICT_KEY}'
+const STARTS_FUNCTION: string = $'^\s*\%({MODIFIERS.def}\)\=def\>!\=\s\@='
 
 # ENDS_FUNCTION {{{3
 
diff --git a/runtime/doc/undo.txt b/runtime/doc/undo.txt
index cc33482..dc2274c 100644
--- a/runtime/doc/undo.txt
+++ b/runtime/doc/undo.txt
@@ -111,9 +111,19 @@
 parts.  E.g., for each sentence.  |i_CTRL-G_u|
 
 Setting the value of 'undolevels' also closes the undo block.  Even when the
-new value is equal to the old value.  In |Vim9| script: >
-	&undolevels = &undolevels
+new value is equal to the old value.  Use `g:undolevels` to explicitly read
+and write only the global value of 'undolevels'. In |Vim9| script: >
+	&g:undolevels = &g:undolevels
 In legacy script: >
+	let &g:undolevels = &g:undolevels
+
+Note that the similar-looking assignment `let &undolevels=&undolevels` does not
+preserve the global option value of 'undolevels' in the event that the local
+option has been set to a different value.  For example: >
+	" Start with different global and local values for 'undolevels'.
+	let &g:undolevels = 1000
+	let &l:undolevels = 2000
+	" This assignment changes the global option to 2000:
 	let &undolevels = &undolevels
 
 ==============================================================================
@@ -366,12 +376,20 @@
 When you set 'undolevels' to -1 the undo information is not immediately
 cleared, this happens at the next change.  To force clearing the undo
 information you can use these commands: >
-	:let old_undolevels = &undolevels
-	:set undolevels=-1
+	:let old_undolevels = &l:undolevels
+	:setlocal undolevels=-1
 	:exe "normal a \<BS>\<Esc>"
-	:let &undolevels = old_undolevels
+	:let &l:undolevels = old_undolevels
 	:unlet old_undolevels
 
+Note use of `&l:undolevels` to explicitly read the local value of 'undolevels'
+and the use of `:setlocal` to change only the local option (which takes
+precedence over the corresponding global option value).  Saving the option value
+via the use of `&undolevels` is unpredictable; it reads either the local value
+(if one has been set) or the global value (otherwise).  Also, if a local value
+has been set, changing the option via `:set undolevels` will change both the
+global and local values, requiring extra work to save and restore both values.
+
 Marks for the buffer ('a to 'z) are also saved and restored, together with the
 text.
 
diff --git a/runtime/filetype.vim b/runtime/filetype.vim
index 49e602f..eea55f8 100644
--- a/runtime/filetype.vim
+++ b/runtime/filetype.vim
@@ -894,6 +894,7 @@
 endif
 au BufNewFile,BufRead $HOME/.config/cabal/config setf cabalconfig
 au BufNewFile,BufRead cabal.config		setf cabalconfig
+au BufNewFile,BufRead *.persistentmodels	setf haskellpersistent
 
 " Haste
 au BufNewFile,BufRead *.ht			setf haste
@@ -948,6 +949,9 @@
 " Hosts access
 au BufNewFile,BufRead */etc/hosts.allow,*/etc/hosts.deny  setf hostsaccess
 
+" Hurl
+au BufRead,BufNewFile *.hurl			setf hurl
+
 " Hyper Builder
 au BufNewFile,BufRead *.hb			setf hb
 
@@ -1564,6 +1568,10 @@
 " Pine config
 au BufNewFile,BufRead .pinerc,pinerc,.pinercex,pinercex		setf pine
 
+" Pip requirements
+au BufNewFile,BufRead *.pip			setf requirements
+au BufNewFile,BufRead requirements.txt		setf requirements
+
 " Pipenv Pipfiles
 au BufNewFile,BufRead Pipfile			setf toml
 au BufNewFile,BufRead Pipfile.lock		setf json
diff --git a/runtime/indent/rapid.vim b/runtime/indent/rapid.vim
new file mode 100644
index 0000000..f97ebf8
--- /dev/null
+++ b/runtime/indent/rapid.vim
@@ -0,0 +1,255 @@
+" ABB Rapid Command indent file for Vim
+" Language: ABB Rapid Command
+" Maintainer: Patrick Meiser-Knosowski <knosowski@graeffrobotics.de>
+" Version: 2.2.7
+" Last Change: 12. May 2023
+" Credits: Based on indent/vim.vim
+"
+" Suggestions of improvement are very welcome. Please email me!
+"
+" Known bugs: ../doc/rapid.txt
+"
+" TODO
+" * indent wrapped lines which do not end with an ; or special key word,
+"     maybe this is a better idea, but then () and [] has to be changed as
+"     well
+"
+
+if exists("g:rapidNoSpaceIndent")
+  if !exists("g:rapidSpaceIndent")
+    let g:rapidSpaceIndent = !g:rapidNoSpaceIndent
+  endif
+  unlet g:rapidNoSpaceIndent
+endif
+
+" Only load this indent file when no other was loaded.
+if exists("b:did_indent") || get(g:,'rapidNoIndent',0)
+  finish
+endif
+let b:did_indent = 1
+
+setlocal nolisp
+setlocal nosmartindent
+setlocal autoindent
+setlocal indentexpr=GetRapidIndent()
+if get(g:,'rapidNewStyleIndent',0)
+  setlocal indentkeys=!^F,o,O,0=~endmodule,0=~error,0=~undo,0=~backward,0=~endproc,0=~endrecord,0=~endtrap,0=~endfunc,0=~else,0=~endif,0=~endtest,0=~endfor,0=~endwhile,:,<[>,<]>,<(>,<)>
+else
+  setlocal indentkeys=!^F,o,O,0=~endmodule,0=~error,0=~undo,0=~backward,0=~endproc,0=~endrecord,0=~endtrap,0=~endfunc,0=~else,0=~endif,0=~endtest,0=~endfor,0=~endwhile,:
+endif
+let b:undo_indent="setlocal lisp< si< ai< inde< indk<"
+
+if get(g:,'rapidSpaceIndent',1)
+  " Use spaces for indention, 2 is enough. 
+  " More or even tabs wastes space on the teach pendant.
+  setlocal softtabstop=2
+  setlocal shiftwidth=2
+  setlocal expandtab
+  setlocal shiftround
+  let b:undo_indent = b:undo_indent." sts< sw< et< sr<"
+endif
+
+" Only define the function once.
+if exists("*GetRapidIndent")
+  finish
+endif
+
+let s:keepcpo= &cpo
+set cpo&vim
+
+function GetRapidIndent()
+  let ignorecase_save = &ignorecase
+  try
+    let &ignorecase = 0
+    return s:GetRapidIndentIntern()
+  finally
+    let &ignorecase = ignorecase_save
+  endtry
+endfunction
+
+function s:GetRapidIndentIntern() abort
+
+  let l:currentLineNum = v:lnum
+  let l:currentLine = getline(l:currentLineNum)
+
+  if  l:currentLine =~ '^!' && !get(g:,'rapidCommentIndent',0)
+    " If current line is ! line comment, do not change indent
+    " This may be usefull if code is commented out at the first column.
+    return 0
+  endif
+
+  " Find a non-blank line above the current line.
+  let l:preNoneBlankLineNum = s:RapidPreNoneBlank(v:lnum - 1)
+  if  l:preNoneBlankLineNum == 0
+    " At the start of the file use zero indent.
+    return 0
+  endif
+
+  let l:preNoneBlankLine = getline(l:preNoneBlankLineNum)
+  let l:ind = indent(l:preNoneBlankLineNum)
+
+  " Define add a 'shiftwidth' pattern
+  let l:addShiftwidthPattern  = '\c\v^\s*('
+  let l:addShiftwidthPattern .=           '((local|task)\s+)?(module|record|proc|func|trap)\s+\k'
+  let l:addShiftwidthPattern .=           '|(backward|error|undo)>'
+  let l:addShiftwidthPattern .=         ')'
+  "
+  " Define Subtract 'shiftwidth' pattern
+  let l:subtractShiftwidthPattern  = '\c\v^\s*('
+  let l:subtractShiftwidthPattern .=           'end(module|record|proc|func|trap)>'
+  let l:subtractShiftwidthPattern .=           '|(backward|error|undo)>'
+  let l:subtractShiftwidthPattern .=         ')'
+
+  " Add shiftwidth
+  if l:preNoneBlankLine =~ l:addShiftwidthPattern
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "then",     0)>=0
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "else",     0)>=0
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "do",       0)>=0
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "case",     0)>=0
+        \|| s:RapidLenTilStr(l:preNoneBlankLineNum, "default",  0)>=0
+    let l:ind += &sw
+  endif
+
+  " Subtract shiftwidth
+  if l:currentLine =~ l:subtractShiftwidthPattern
+        \|| s:RapidLenTilStr(l:currentLineNum, "endif",     0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "endfor",    0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "endwhile",  0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "endtest",   0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "else",      0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "elseif",    0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "case",      0)>=0
+        \|| s:RapidLenTilStr(l:currentLineNum, "default",   0)>=0
+    let l:ind = l:ind - &sw
+  endif
+
+  " First case (or default) after a test gets the indent of the test.
+  if (s:RapidLenTilStr(l:currentLineNum, "case", 0)>=0 || s:RapidLenTilStr(l:currentLineNum, "default", 0)>=0) && s:RapidLenTilStr(l:preNoneBlankLineNum, "test", 0)>=0
+    let l:ind += &sw
+  endif
+
+  " continued lines with () or []
+  let l:OpenSum  = s:RapidLoneParen(l:preNoneBlankLineNum,"(") + s:RapidLoneParen(l:preNoneBlankLineNum,"[")
+  if get(g:,'rapidNewStyleIndent',0)
+    let l:CloseSum = s:RapidLoneParen(l:preNoneBlankLineNum,")") + s:RapidLoneParen(l:currentLineNum,"]")
+  else
+    let l:CloseSum = s:RapidLoneParen(l:preNoneBlankLineNum,")") + s:RapidLoneParen(l:preNoneBlankLineNum,"]")
+  endif
+  if l:OpenSum > l:CloseSum
+    let l:ind += (l:OpenSum * 4 * &sw)
+  elseif l:OpenSum < l:CloseSum
+    let l:ind -= (l:CloseSum * 4 * &sw)
+  endif
+
+  return l:ind
+endfunction
+
+" Returns the length of the line until a:str occur outside a string or
+" comment. Search starts at string index a:startIdx.
+" If a:str is a word also add word bounderies and case insesitivity.
+" Note: rapidTodoComment and rapidDebugComment are not taken into account.
+function s:RapidLenTilStr(lnum, str, startIdx) abort
+
+  let l:line = getline(a:lnum)
+  let l:len  = strlen(l:line)
+  let l:idx  = a:startIdx
+  let l:str  = a:str
+  if l:str =~ '^\k\+$'
+    let l:str = '\c\<' . l:str . '\>'
+  endif
+
+  while l:len > l:idx
+    let l:idx = match(l:line, l:str, l:idx)
+    if l:idx < 0
+      " a:str not found
+      return -1
+    endif
+    let l:synName = synIDattr(synID(a:lnum,l:idx+1,0),"name")
+    if         l:synName != "rapidString"
+          \&&  l:synName != "rapidConcealableString"
+          \&& (l:synName != "rapidComment" || l:str =~ '^!')
+      " a:str found outside string or line comment
+      return l:idx
+    endif
+    " a:str is part of string or line comment
+    let l:idx += 1 " continue search for a:str
+  endwhile
+  
+  " a:str not found or l:len <= a:startIdx
+  return -1
+endfunction
+
+" a:lchar shoud be one of (, ), [, ], { or }
+" returns the number of opening/closing parenthesise which have no
+" closing/opening match in getline(a:lnum)
+function s:RapidLoneParen(lnum,lchar) abort
+  if a:lchar == "(" || a:lchar == ")"
+    let l:opnParChar = "("
+    let l:clsParChar = ")"
+  elseif a:lchar == "[" || a:lchar == "]"
+    let l:opnParChar = "["
+    let l:clsParChar = "]"
+  elseif a:lchar == "{" || a:lchar == "}"
+    let l:opnParChar = "{"
+    let l:clsParChar = "}"
+  else
+    return 0
+  endif
+
+  let l:line = getline(a:lnum)
+
+  " look for the first ! which is not part of a string 
+  let l:len = s:RapidLenTilStr(a:lnum,"!",0)
+  if l:len == 0
+    return 0 " first char is !; ignored
+  endif
+
+  let l:opnParen = 0
+  " count opening brakets
+  let l:i = 0
+  while l:i >= 0
+    let l:i = s:RapidLenTilStr(a:lnum, l:opnParChar, l:i)
+    if l:i >= 0
+      let l:opnParen += 1
+      let l:i += 1
+    endif
+  endwhile
+
+  let l:clsParen = 0
+  " count closing brakets
+  let l:i = 0
+  while l:i >= 0
+    let l:i = s:RapidLenTilStr(a:lnum, l:clsParChar, l:i)
+    if l:i >= 0
+      let l:clsParen += 1
+      let l:i += 1
+    endif
+  endwhile
+
+  if (a:lchar == "(" || a:lchar == "[" || a:lchar == "{") && l:opnParen>l:clsParen
+    return (l:opnParen-l:clsParen)
+  elseif (a:lchar == ")" || a:lchar == "]" || a:lchar == "}") && l:clsParen>l:opnParen
+    return (l:clsParen-l:opnParen)
+  endif
+
+  return 0
+endfunction
+
+" This function works almost like prevnonblank() but handles %%%-headers and
+" comments like blank lines
+function s:RapidPreNoneBlank(lnum) abort
+
+  let nPreNoneBlank = prevnonblank(a:lnum)
+
+  while nPreNoneBlank>0 && getline(nPreNoneBlank) =~ '\v\c^\s*(\%\%\%|!)'
+    " Previouse none blank line irrelevant. Look further aback.
+    let nPreNoneBlank = prevnonblank(nPreNoneBlank - 1)
+  endwhile
+
+  return nPreNoneBlank
+endfunction
+
+let &cpo = s:keepcpo
+unlet s:keepcpo
+
+" vim:sw=2 sts=2 et
diff --git a/runtime/indent/testdir/rapid.in b/runtime/indent/testdir/rapid.in
new file mode 100644
index 0000000..515912e
--- /dev/null
+++ b/runtime/indent/testdir/rapid.in
@@ -0,0 +1,266 @@
+! vim: set ft=rapid :
+
+! START_INDENT
+
+%%%
+  VERSION:1
+  LANGUAGE:ENGLISH
+%%%
+  
+module LowerCaseModule
+
+task pers num n1 := 0;
+local pers num n2 := 1;
+var bool b1 := false;
+var intnum i1;
+
+! put some stuff in those strings that may confuse indentation
+const string st1 := "endmodule ("; 
+pers string st_Appl_Info{3,3}:=[
+[
+"["
+,
+"default"
+,
+"case"
+],
+[
+"else"
+,
+"then"
+,
+"endif"
+],
+[
+"do"
+,
+"}"
+,
+")"
+],
+];
+
+pers tooldata tTool1:=[TRUE, 
+[
+[97.4, 0, 223.1], 
+[0.924, 0, 0.383 ,0]
+], 
+[5, 
+[23, 0, 75], 
+[1, 0, 0, 0], 0, 0, 0
+]
+];
+const robtarget p1:=[ 
+[600, 500, 225.3], 
+[1, 0, 0, 0], 
+[1, 1, 0, 0], 
+[ 11, 12.3, 9E9, 9E9, 9E9, 9E9]
+];
+
+record myRec
+num nRecNum1
+bool bRecBool1
+endrecord
+
+proc proc1(num n1,
+num n2)
+var string st1;
+n1 := n1+1;
+MoveJSync p1, vmax, z30, tool1, "proc2";
+backward
+MoveJSync p1, v100, fine, tool1, "proc2";
+undo
+n1 := n1-1;
+error
+trynext;
+endproc
+
+func num nFunc1(
+switch s1
+|switch s2
+,num n1
+,bool b1)
+var num nVar;
+if not Present(s1) return;
+if Present(s1) then
+Incr n1;'
+elseif Present(s2) then
+b1:=false;
+else
+while n1>0 do
+Decr n1;
+test n1
+
+case 1:
+test1;
+case 2:
+test2;
+default:
+WaitUntil false;
+endtest
+endwhile
+endif
+for i from 1 to 10 step 2 do
+for j from 1 to 10 do
+st_Appl_Info{i,j} := "";
+endfor
+endfor
+!     return 1;
+return 0;
+error
+return -1;
+endfunc
+
+trap Trap1
+Reset do1;
+endtrap
+
+endmodule
+
+MODULE UpperCaseModule(SYSMODULE,NOSTEPIN)
+TASK pers num n1 := 0;
+LOCAL pers num n2 := 1;
+VAR bool b1 := false;
+VAR intnum i1;
+
+LOCAL FUNC num nFunc1(
+switch s1
+|switch s2
+,num n1
+,bool b1)
+VAR num nVar;
+IF NOT PRESENT(s1) RETURN;
+IF PRESENT(s1) THEN
+INCR n1;'
+ELSEIF PRESENT(s2) THEN
+b1:=FALSE;
+ELSE
+WHILE n1>0 DO
+DECR n1;
+TEST n1
+
+CASE 1:
+test1;
+CASE 2:
+test2;
+DEFAULT:
+WAITUNTIL FALSE;
+ENDTEST
+ENDWHILE
+ENDIF
+FOR i FROM 1 TO 10 STEP 2 DO
+FOR j FROM 1 TO 10 DO
+st_Appl_Info{i,j} := "";
+ENDFOR
+ENDFOR
+!     RETURN 1;
+RETURN 0;
+ERROR
+RETURN -1;
+ENDFUNC
+
+TRAP Trap1
+Reset do1;
+ENDTRAP
+
+ENDMODULE
+
+Module MixedCaseModule(SysModule)
+Task pers num n1 := 0;
+Local pers num n2 := 1;
+Var bool b1 := false;
+Var intnum i1;
+
+Task Func num nFunc1(
+switch s1
+|switch s2
+,num n1
+,bool b1)
+Var num nVar;
+If Not Present(s1) Return;
+If Present(s1) Then
+Incr n1;'
+ElseIf Present(s2) Then
+b1:=false;
+Else
+While n1>0 Do
+Decr n1;
+Test n1
+
+Case 1:
+test1;
+Case 2:
+test2;
+Default:
+WaitUntil false;
+EndTest
+EndWhile
+EndIf
+For i From 1 To 10 Step 2 Do
+For j From 1 To 10 Do
+st_Appl_Info{i,j} := "";
+EndFor
+EndFor
+!     Return 1;
+Return 0;
+Error
+Return -1;
+EndFunc
+
+Trap Trap1
+Reset do1;
+EndTrap
+
+EndModule
+
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidSpaceIndent = 0
+! INDENT_EXE set shiftwidth=4
+
+proc bla()
+var num i;
+Incr i;
+endproc
+
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidCommentIndent = 1
+!
+proc bla()
+! indent this first column comment because of g:rapidCommentIndent=1
+endproc
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidNewStyleIndent = 1
+pers string st_Appl_Info{3,3}:=
+[
+[
+"["
+,
+"default"
+,
+"case"
+]
+,
+[
+"else"
+,
+"then"
+,
+"endif"
+]
+,
+[
+"do"
+,
+"}"
+,
+")"
+]
+,
+];
+! END_INDENT
diff --git a/runtime/indent/testdir/rapid.ok b/runtime/indent/testdir/rapid.ok
new file mode 100644
index 0000000..ce33682
--- /dev/null
+++ b/runtime/indent/testdir/rapid.ok
@@ -0,0 +1,266 @@
+! vim: set ft=rapid :
+
+! START_INDENT
+
+%%%
+VERSION:1
+LANGUAGE:ENGLISH
+%%%
+
+module LowerCaseModule
+
+  task pers num n1 := 0;
+  local pers num n2 := 1;
+  var bool b1 := false;
+  var intnum i1;
+
+! put some stuff in those strings that may confuse indentation
+  const string st1 := "endmodule ("; 
+  pers string st_Appl_Info{3,3}:=[
+          [
+                  "["
+                  ,
+                  "default"
+                  ,
+                  "case"
+                  ],
+          [
+                  "else"
+                  ,
+                  "then"
+                  ,
+                  "endif"
+                  ],
+          [
+                  "do"
+                  ,
+                  "}"
+                  ,
+                  ")"
+                  ],
+          ];
+
+  pers tooldata tTool1:=[TRUE, 
+          [
+                  [97.4, 0, 223.1], 
+                  [0.924, 0, 0.383 ,0]
+                  ], 
+          [5, 
+                  [23, 0, 75], 
+                  [1, 0, 0, 0], 0, 0, 0
+                  ]
+          ];
+  const robtarget p1:=[ 
+          [600, 500, 225.3], 
+          [1, 0, 0, 0], 
+          [1, 1, 0, 0], 
+          [ 11, 12.3, 9E9, 9E9, 9E9, 9E9]
+          ];
+
+  record myRec
+    num nRecNum1
+    bool bRecBool1
+  endrecord
+
+  proc proc1(num n1,
+            num n2)
+    var string st1;
+    n1 := n1+1;
+    MoveJSync p1, vmax, z30, tool1, "proc2";
+  backward
+    MoveJSync p1, v100, fine, tool1, "proc2";
+  undo
+    n1 := n1-1;
+  error
+    trynext;
+  endproc
+
+  func num nFunc1(
+            switch s1
+            |switch s2
+            ,num n1
+            ,bool b1)
+    var num nVar;
+    if not Present(s1) return;
+    if Present(s1) then
+      Incr n1;'
+    elseif Present(s2) then
+      b1:=false;
+    else
+      while n1>0 do
+        Decr n1;
+        test n1
+
+        case 1:
+          test1;
+        case 2:
+          test2;
+        default:
+          WaitUntil false;
+        endtest
+      endwhile
+    endif
+    for i from 1 to 10 step 2 do
+      for j from 1 to 10 do
+        st_Appl_Info{i,j} := "";
+      endfor
+    endfor
+!     return 1;
+    return 0;
+  error
+    return -1;
+  endfunc
+
+  trap Trap1
+    Reset do1;
+  endtrap
+
+endmodule
+
+MODULE UpperCaseModule(SYSMODULE,NOSTEPIN)
+  TASK pers num n1 := 0;
+  LOCAL pers num n2 := 1;
+  VAR bool b1 := false;
+  VAR intnum i1;
+
+  LOCAL FUNC num nFunc1(
+            switch s1
+            |switch s2
+            ,num n1
+            ,bool b1)
+    VAR num nVar;
+    IF NOT PRESENT(s1) RETURN;
+    IF PRESENT(s1) THEN
+      INCR n1;'
+    ELSEIF PRESENT(s2) THEN
+      b1:=FALSE;
+    ELSE
+      WHILE n1>0 DO
+        DECR n1;
+        TEST n1
+
+        CASE 1:
+          test1;
+        CASE 2:
+          test2;
+        DEFAULT:
+          WAITUNTIL FALSE;
+        ENDTEST
+      ENDWHILE
+    ENDIF
+    FOR i FROM 1 TO 10 STEP 2 DO
+      FOR j FROM 1 TO 10 DO
+        st_Appl_Info{i,j} := "";
+      ENDFOR
+    ENDFOR
+!     RETURN 1;
+    RETURN 0;
+  ERROR
+    RETURN -1;
+  ENDFUNC
+
+  TRAP Trap1
+    Reset do1;
+  ENDTRAP
+
+ENDMODULE
+
+Module MixedCaseModule(SysModule)
+  Task pers num n1 := 0;
+  Local pers num n2 := 1;
+  Var bool b1 := false;
+  Var intnum i1;
+
+  Task Func num nFunc1(
+            switch s1
+            |switch s2
+            ,num n1
+            ,bool b1)
+    Var num nVar;
+    If Not Present(s1) Return;
+    If Present(s1) Then
+      Incr n1;'
+    ElseIf Present(s2) Then
+      b1:=false;
+    Else
+      While n1>0 Do
+        Decr n1;
+        Test n1
+
+        Case 1:
+          test1;
+        Case 2:
+          test2;
+        Default:
+          WaitUntil false;
+        EndTest
+      EndWhile
+    EndIf
+    For i From 1 To 10 Step 2 Do
+      For j From 1 To 10 Do
+        st_Appl_Info{i,j} := "";
+      EndFor
+    EndFor
+!     Return 1;
+    Return 0;
+  Error
+    Return -1;
+  EndFunc
+
+  Trap Trap1
+    Reset do1;
+  EndTrap
+
+EndModule
+
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidSpaceIndent = 0
+! INDENT_EXE set shiftwidth=4
+
+proc bla()
+    var num i;
+    Incr i;
+endproc
+
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidCommentIndent = 1
+!
+proc bla()
+    ! indent this first column comment because of g:rapidCommentIndent=1
+endproc
+! END_INDENT
+
+! START_INDENT
+! INDENT_EXE let g:rapidNewStyleIndent = 1
+pers string st_Appl_Info{3,3}:=
+[
+                [
+                                "["
+                                ,
+                                "default"
+                                ,
+                                "case"
+                ]
+                ,
+                [
+                                "else"
+                                ,
+                                "then"
+                                ,
+                                "endif"
+                ]
+                ,
+                [
+                                "do"
+                                ,
+                                "}"
+                                ,
+                                ")"
+                ]
+                ,
+];
+! END_INDENT
diff --git a/runtime/indent/testdir/vim.in b/runtime/indent/testdir/vim.in
index c60d2d1..c2e149a 100644
--- a/runtime/indent/testdir/vim.in
+++ b/runtime/indent/testdir/vim.in
@@ -484,6 +484,13 @@
 " END_INDENT
 
 " START_INDENT
+if true
+var d = {
+end: 0}
+endif
+" END_INDENT
+
+" START_INDENT
 nunmap <buffer> (
 nunmap <buffer> )
 inoremap [ {
diff --git a/runtime/indent/testdir/vim.ok b/runtime/indent/testdir/vim.ok
index 57f0dbf..b10e081 100644
--- a/runtime/indent/testdir/vim.ok
+++ b/runtime/indent/testdir/vim.ok
@@ -484,6 +484,13 @@
 " END_INDENT
 
 " START_INDENT
+if true
+    var d = {
+	end: 0}
+endif
+" END_INDENT
+
+" START_INDENT
 nunmap <buffer> (
 nunmap <buffer> )
 inoremap [ {