Update runtime files
diff --git a/runtime/doc/builtin.txt b/runtime/doc/builtin.txt
index bf0ae85..98fd138 100644
--- a/runtime/doc/builtin.txt
+++ b/runtime/doc/builtin.txt
@@ -1,4 +1,4 @@
-*builtin.txt* For Vim version 9.0. Last change: 2022 Oct 14
+*builtin.txt* For Vim version 9.0. Last change: 2022 Oct 21
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -1583,11 +1583,9 @@
buffer.
For the cursor position, when 'virtualedit' is active, the
column is one higher if the cursor is after the end of the
- line. This can be used to obtain the column in Insert mode: >
- :imap <F2> <C-O>:let save_ve = &ve<CR>
- \<C-O>:set ve=all<CR>
- \<C-O>:echo col(".") .. "\n" <Bar>
- \let &ve = save_ve<CR>
+ line. Also, when using a <Cmd> mapping the cursor isn't
+ moved, this can be used to obtain the column in Insert mode: >
+ :imap <F2> <Cmd>echo col(".")<CR>
< Can also be used as a |method|: >
GetPos()->col()
diff --git a/runtime/doc/ft_rust.txt b/runtime/doc/ft_rust.txt
index d5f4080..7fe7b7c 100644
--- a/runtime/doc/ft_rust.txt
+++ b/runtime/doc/ft_rust.txt
@@ -1,70 +1,70 @@
-*ft_rust.txt* For Vim version 9.0. Last change: 2017 Nov 02
+*ft_rust.txt* For Vim version 9.0. Last change: 2022 Oct 17
This is documentation for the Rust filetype plugin.
==============================================================================
-CONTENTS *rust*
+CONTENTS *rust*
-1. Introduction |rust-intro|
-2. Settings |rust-settings|
-3. Commands |rust-commands|
-4. Mappings |rust-mappings|
+1. Introduction |rust-intro|
+2. Settings |rust-settings|
+3. Commands |rust-commands|
+4. Mappings |rust-mappings|
==============================================================================
-INTRODUCTION *rust-intro*
+INTRODUCTION *rust-intro*
This plugin provides syntax and supporting functionality for the Rust
filetype.
==============================================================================
-SETTINGS *rust-settings*
+SETTINGS *rust-settings*
This plugin has a few variables you can define in your vimrc that change the
behavior of the plugin.
- *g:rustc_path*
+ *g:rustc_path*
g:rustc_path~
Set this option to the path to rustc for use in the |:RustRun| and
|:RustExpand| commands. If unset, "rustc" will be located in $PATH: >
let g:rustc_path = $HOME .. "/bin/rustc"
<
- *g:rustc_makeprg_no_percent*
+ *g:rustc_makeprg_no_percent*
g:rustc_makeprg_no_percent~
Set this option to 1 to have 'makeprg' default to "rustc" instead of
"rustc %": >
let g:rustc_makeprg_no_percent = 1
<
- *g:rust_conceal*
+ *g:rust_conceal*
g:rust_conceal~
Set this option to turn on the basic |conceal| support: >
let g:rust_conceal = 1
<
- *g:rust_conceal_mod_path*
+ *g:rust_conceal_mod_path*
g:rust_conceal_mod_path~
Set this option to turn on |conceal| for the path connecting token
"::": >
let g:rust_conceal_mod_path = 1
<
- *g:rust_conceal_pub*
+ *g:rust_conceal_pub*
g:rust_conceal_pub~
Set this option to turn on |conceal| for the "pub" token: >
let g:rust_conceal_pub = 1
<
- *g:rust_recommended_style*
+ *g:rust_recommended_style*
g:rust_recommended_style~
- Set this option to enable vim indentation and textwidth settings to
- conform to style conventions of the rust standard library (i.e. use 4
- spaces for indents and sets 'textwidth' to 99). This option is enabled
+ Set this option to enable vim indentation and textwidth settings to
+ conform to style conventions of the rust standard library (i.e. use 4
+ spaces for indents and sets 'textwidth' to 99). This option is enabled
by default. To disable it: >
let g:rust_recommended_style = 0
<
- *g:rust_fold*
+ *g:rust_fold*
g:rust_fold~
Set this option to turn on |folding|: >
let g:rust_fold = 1
@@ -76,39 +76,39 @@
2 Braced blocks are folded. 'foldlevel' is left at the
global value (all folds are closed by default).
- *g:rust_bang_comment_leader*
+ *g:rust_bang_comment_leader*
g:rust_bang_comment_leader~
Set this option to 1 to preserve the leader on multi-line doc comments
using the /*! syntax: >
let g:rust_bang_comment_leader = 1
<
- *g:ftplugin_rust_source_path*
+ *g:ftplugin_rust_source_path*
g:ftplugin_rust_source_path~
Set this option to a path that should be prepended to 'path' for Rust
source files: >
let g:ftplugin_rust_source_path = $HOME .. '/dev/rust'
<
- *g:rustfmt_command*
+ *g:rustfmt_command*
g:rustfmt_command~
Set this option to the name of the 'rustfmt' executable in your $PATH. If
not specified it defaults to 'rustfmt' : >
let g:rustfmt_command = 'rustfmt'
<
- *g:rustfmt_autosave*
+ *g:rustfmt_autosave*
g:rustfmt_autosave~
Set this option to 1 to run |:RustFmt| automatically when saving a
buffer. If not specified it defaults to 0 : >
let g:rustfmt_autosave = 0
<
- *g:rustfmt_fail_silently*
+ *g:rustfmt_fail_silently*
g:rustfmt_fail_silently~
Set this option to 1 to prevent 'rustfmt' from populating the
|location-list| with errors. If not specified it defaults to 0: >
let g:rustfmt_fail_silently = 0
<
- *g:rustfmt_options*
+ *g:rustfmt_options*
g:rustfmt_options~
Set this option to a string of options to pass to 'rustfmt'. The
write-mode is already set to 'overwrite'. If not specified it
@@ -116,13 +116,13 @@
let g:rustfmt_options = ''
<
- *g:rust_playpen_url*
+ *g:rust_playpen_url*
g:rust_playpen_url~
Set this option to override the URL for the playpen to use: >
let g:rust_playpen_url = 'https://play.rust-lang.org/'
<
- *g:rust_shortener_url*
+ *g:rust_shortener_url*
g:rust_shortener_url~
Set this option to override the URL for the URL shortener: >
let g:rust_shortener_url = 'https://is.gd/'
@@ -130,9 +130,9 @@
==============================================================================
-COMMANDS *rust-commands*
+COMMANDS *rust-commands*
-:RustRun [args] *:RustRun*
+:RustRun [args] *:RustRun*
:RustRun! [rustc-args] [--] [args]
Compiles and runs the current file. If it has unsaved changes,
it will be saved first using |:update|. If the current file is
@@ -150,7 +150,7 @@
If |g:rustc_path| is defined, it is used as the path to rustc.
Otherwise it is assumed rustc can be found in $PATH.
-:RustExpand [args] *:RustExpand*
+:RustExpand [args] *:RustExpand*
:RustExpand! [TYPE] [args]
Expands the current file using --pretty and displays the
results in a new split. If the current file has unsaved
@@ -169,7 +169,7 @@
If |g:rustc_path| is defined, it is used as the path to rustc.
Otherwise it is assumed rustc can be found in $PATH.
-:RustEmitIr [args] *:RustEmitIr*
+:RustEmitIr [args] *:RustEmitIr*
Compiles the current file to LLVM IR and displays the results
in a new split. If the current file has unsaved changes, it
will be saved first using |:update|. If the current file is an
@@ -180,7 +180,7 @@
If |g:rustc_path| is defined, it is used as the path to rustc.
Otherwise it is assumed rustc can be found in $PATH.
-:RustEmitAsm [args] *:RustEmitAsm*
+:RustEmitAsm [args] *:RustEmitAsm*
Compiles the current file to assembly and displays the results
in a new split. If the current file has unsaved changes, it
will be saved first using |:update|. If the current file is an
@@ -191,7 +191,7 @@
If |g:rustc_path| is defined, it is used as the path to rustc.
Otherwise it is assumed rustc can be found in $PATH.
-:RustPlay *:RustPlay*
+:RustPlay *:RustPlay*
This command will only work if you have web-api.vim installed
(available at https://github.com/mattn/webapi-vim). It sends the
current selection, or if nothing is selected, the entirety of the
@@ -204,7 +204,7 @@
|g:rust_shortener_url| is the base URL for the shortener, by
default "https://is.gd/"
-:RustFmt *:RustFmt*
+:RustFmt *:RustFmt*
Runs |g:rustfmt_command| on the current buffer. If
|g:rustfmt_options| is set then those will be passed to the
executable.
@@ -214,12 +214,12 @@
|g:rustfmt_command|. If |g:rustfmt_fail_silently| is set to 1
then it will not populate the |location-list|.
-:RustFmtRange *:RustFmtRange*
+:RustFmtRange *:RustFmtRange*
Runs |g:rustfmt_command| with selected range. See
|:RustFmt| for any other information.
==============================================================================
-MAPPINGS *rust-mappings*
+MAPPINGS *rust-mappings*
This plugin defines mappings for |[[| and |]]| to support hanging indents.
diff --git a/runtime/doc/map.txt b/runtime/doc/map.txt
index 4ac307c..c33c9f8 100644
--- a/runtime/doc/map.txt
+++ b/runtime/doc/map.txt
@@ -1,4 +1,4 @@
-*map.txt* For Vim version 9.0. Last change: 2022 Sep 26
+*map.txt* For Vim version 9.0. Last change: 2022 Oct 19
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -1483,7 +1483,7 @@
Command attributes ~
- *command-attributes*
+ *command-attributes*
User-defined commands are treated by Vim just like any other Ex commands. They
can have arguments, or have a range specified. Arguments are subject to
completion as filenames, buffers, etc. Exactly how this works depends upon the
diff --git a/runtime/doc/message.txt b/runtime/doc/message.txt
index 805fc37..2e23ac4 100644
--- a/runtime/doc/message.txt
+++ b/runtime/doc/message.txt
@@ -1,4 +1,4 @@
-*message.txt* For Vim version 9.0. Last change: 2022 Jan 26
+*message.txt* For Vim version 9.0. Last change: 2022 Oct 18
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -635,6 +635,7 @@
find out what happened, and decide which version of the file you want to keep.
Set the 'autoread' option if you want to do this automatically.
This message is not given when 'buftype' is not empty.
+Also see the |FileChangedShell| autocommand.
There is one situation where you get this message even though there is nothing
wrong: If you save a file in Windows on the day the daylight saving time
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index de388bb..0a4df61 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt* For Vim version 9.0. Last change: 2022 Oct 15
+*options.txt* For Vim version 9.0. Last change: 2022 Oct 28
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -3048,11 +3048,13 @@
When 'encoding' is set to a Unicode encoding, and 'fileencodings' was
not set yet, the default for 'fileencodings' is changed.
- *'endofline'* *'eol'* *'noendofline'* *'noeol'*
-'endofline' 'eol' boolean (default on)
+ *'endoffile'* *'eof'* *'noendoffile'* *'noeof'*
+'endoffile' 'eof' boolean (default on)
local to buffer
+ Indicates that a CTRL-Z character was found at the end of the file
+ when reading it. Normally only happens when 'fileformat' is "dos".
When writing a file and this option is off and the 'binary' option
- is on, or 'fixeol' option is off, no CTRL-Z will be written for at the
+ is on, or 'fixeol' option is off, no CTRL-Z will be written at the
end of the file.
*'endofline'* *'eol'* *'noendofline'* *'noeol'*
diff --git a/runtime/doc/pi_tar.txt b/runtime/doc/pi_tar.txt
index 7b1c7db..d1b2959 100644
--- a/runtime/doc/pi_tar.txt
+++ b/runtime/doc/pi_tar.txt
@@ -1,4 +1,4 @@
-*pi_tar.txt* For Vim version 9.0. Last change: 2020 Jan 07
+*pi_tar.txt* For Vim version 9.0. Last change: 2022 Oct 17
+====================+
| Tar File Interface |
@@ -80,20 +80,20 @@
These options are variables that one may change, typically in one's
<.vimrc> file.
- Default
- Variable Value Explanation
+ Default
+ Variable Value Explanation
*g:tar_browseoptions* "Ptf" used to get a list of contents
- *g:tar_readoptions* "OPxf" used to extract a file from a tarball
- *g:tar_cmd* "tar" the name of the tar program
- *g:tar_nomax* 0 if true, file window will not be maximized
- *g:tar_secure* undef if exists:
+ *g:tar_readoptions* "OPxf" used to extract a file from a tarball
+ *g:tar_cmd* "tar" the name of the tar program
+ *g:tar_nomax* 0 if true, file window will not be maximized
+ *g:tar_secure* undef if exists:
"--"s will be used to prevent unwanted
option expansion in tar commands.
Please be sure that your tar command
accepts "--"; Posix compliant tar
utilities do accept them.
if not exists:
- The tar plugin will reject any tar
+ The tar plugin will reject any tar
files or member files that begin with
"-"
Not all tar's support the "--" which is why
diff --git a/runtime/doc/pi_zip.txt b/runtime/doc/pi_zip.txt
index d5a71b7..a5b056f 100644
--- a/runtime/doc/pi_zip.txt
+++ b/runtime/doc/pi_zip.txt
@@ -1,4 +1,4 @@
-*pi_zip.txt* For Vim version 9.0. Last change: 2021 Nov 08
+*pi_zip.txt* For Vim version 9.0. Last change: 2022 Oct 17
+====================+
| Zip File Interface |
@@ -39,7 +39,7 @@
OPTIONS~
- *g:zip_nomax*
+ *g:zip_nomax*
If this variable exists and is true, the file window will not be
automatically maximized when opened.
@@ -54,21 +54,21 @@
under Windows ("). If you'd rather have no quotes, simply set
g:zip_shq to the empty string (let g:zip_shq= "") in your <.vimrc>.
- *g:zip_unzipcmd*
+ *g:zip_unzipcmd*
Use this option to specify the program which does the duty of "unzip".
It's used during browsing. By default: >
- let g:zip_unzipcmd= "unzip"
+ let g:zip_unzipcmd= "unzip"
<
*g:zip_zipcmd*
Use this option to specify the program which does the duty of "zip".
It's used during the writing (updating) of a file already in a zip
file; by default: >
- let g:zip_zipcmd= "zip"
+ let g:zip_zipcmd= "zip"
<
*g:zip_extractcmd*
This option specifies the program (and any options needed) used to
extract a file from a zip archive. By default, >
- let g:zip_extractcmd= g:zip_unzipcmd
+ let g:zip_extractcmd= g:zip_unzipcmd
<
PREVENTING LOADING~
@@ -103,14 +103,14 @@
==============================================================================
4. History *zip-history* {{{1
v32 Oct 22, 2021 * to avoid an issue with a vim 8.2 patch, zipfile: has
- been changed to zipfile:// . This often shows up
+ been changed to zipfile:// . This often shows up
as zipfile:/// with zipped files that are root-based.
v29 Apr 02, 2017 * (Klartext) reported that an encrypted zip file could
- opened but the swapfile held unencrypted contents.
+ opened but the swapfile held unencrypted contents.
The solution is to edit the contents of a zip file
using the |:noswapfile| modifier.
v28 Oct 08, 2014 * changed the sanity checks for executables to reflect
- the command actually to be attempted in zip#Read()
+ the command actually to be attempted in zip#Read()
and zip#Write()
* added the extraction of a file capability
Nov 30, 2015 * added *.epub to the |g:zipPlugin_ext| list
diff --git a/runtime/doc/quickref.txt b/runtime/doc/quickref.txt
index 370e1f2..adf2b4f 100644
--- a/runtime/doc/quickref.txt
+++ b/runtime/doc/quickref.txt
@@ -1,4 +1,4 @@
-*quickref.txt* For Vim version 9.0. Last change: 2022 Oct 15
+*quickref.txt* For Vim version 9.0. Last change: 2022 Oct 28
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -689,6 +689,7 @@
'edcompatible' 'ed' toggle flags of ":substitute" command
'emoji' 'emo' emoji characters are considered full width
'encoding' 'enc' encoding used internally
+'endoffile' 'eof' write CTRL-Z at end of the file
'endofline' 'eol' write <EOL> for last line in file
'equalalways' 'ea' windows are automatically made the same size
'equalprg' 'ep' external program to use for "=" command
diff --git a/runtime/doc/scroll.txt b/runtime/doc/scroll.txt
index d43ecb2..8e57be4 100644
--- a/runtime/doc/scroll.txt
+++ b/runtime/doc/scroll.txt
@@ -1,4 +1,4 @@
-*scroll.txt* For Vim version 9.0. Last change: 2022 May 07
+*scroll.txt* For Vim version 9.0. Last change: 2022 Oct 17
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -280,6 +280,17 @@
This only works when Vim gets the scroll wheel events, of course. You can
check if this works with the "xev" program.
+ *mouse-scrolling-off*
+If you do not want the mouse to cause scrolling (e.g. because resting your
+palm on the touchpad causes scroll events), you can disable that with: >
+ :map <ScrollWheelDown> <Nop>
+ :map! <ScrollWheelDown> <Nop>
+ :map <ScrollWheelUp> <Nop>
+ :map! <ScrollWheelUp> <Nop>
+ :map <ScrollWheelLeft> <Nop>
+ :map! <ScrollWheelLeft> <Nop>
+ :map <ScrollWheelRight> <Nop>
+ :map! <ScrollWheelRight> <Nop>
When using XFree86, the /etc/XF86Config file should have the correct entry for
your mouse. For FreeBSD, this entry works for a Logitech scrollmouse: >
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index 89ac893..fc93378 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt* For Vim version 9.0. Last change: 2022 Oct 14
+*syntax.txt* For Vim version 9.0. Last change: 2022 Oct 17
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -500,7 +500,7 @@
Go back to the default to use 'number' by deleting the variable: >
:unlet g:html_number_lines
<
- *g:html_line_ids*
+ *g:html_line_ids*
Default: 1 if |g:html_number_lines| is set, 0 otherwise.
When 1, adds an HTML id attribute to each line number, or to an empty <span>
inserted for that purpose if no line numbers are shown. This ID attribute
@@ -692,6 +692,22 @@
>
:let g:html_no_pre = 1
<
+ *g:html_no_doc*
+Default: 0.
+When 1 it doesn't generate a full HTML document with a DOCTYPE, <head>,
+<body>, etc. If |g:html_use_css| is enabled (the default) you'll have to
+define the CSS manually. The |g:html_dynamic_folds| and |g:html_line_ids|
+settings (off by default) also insert some JavaScript.
+
+
+ *g:html_no_links*
+Default: 0.
+Don't generate <a> tags for text that looks like an URL.
+
+ *g:html_no_modeline*
+Default: 0.
+Don't generate a modeline disabling folding.
+
*g:html_expand_tabs*
Default: 0 if 'tabstop' is 8, 'expandtab' is 0, 'vartabstop' is not in use,
and no fold column or line numbers occur in the generated HTML;
@@ -2932,7 +2948,7 @@
You can set "ruby_foldable_groups" to restrict which groups are foldable: >
- :let ruby_foldable_groups = 'if case %'
+ :let ruby_foldable_groups = 'if case %'
<
The value is a space-separated list of keywords:
@@ -2940,22 +2956,22 @@
-------- ------------------------------------- ~
ALL Most block syntax (default)
NONE Nothing
- if "if" or "unless" block
+ if "if" or "unless" block
def "def" block
class "class" block
module "module" block
- do "do" block
+ do "do" block
begin "begin" block
case "case" block
for "for", "while", "until" loops
- { Curly bracket block or hash literal
- [ Array literal
- % Literal with "%" notation, e.g.: %w(STRING), %!STRING!
- / Regexp
+ { Curly bracket block or hash literal
+ [ Array literal
+ % Literal with "%" notation, e.g.: %w(STRING), %!STRING!
+ / Regexp
string String and shell command output (surrounded by ', ", `)
- : Symbol
- # Multiline comment
- << Here documents
+ : Symbol
+ # Multiline comment
+ << Here documents
__END__ Source code after "__END__" directive
*ruby_no_expensive*
@@ -3802,7 +3818,7 @@
clear: Syntax specific iskeyword setting is disabled and the
buffer-local 'iskeyword' setting is used.
- {option} Set the syntax 'iskeyword' option to a new value.
+ {option} Set the syntax 'iskeyword' option to a new value.
Example: >
:syntax iskeyword @,48-57,192-255,$,_
@@ -5280,7 +5296,7 @@
"gg" is the Green value
"bb" is the Blue value
All values are hexadecimal, range from "00" to "ff". Examples: >
- :highlight Comment guifg=#11f0c3 guibg=#ff00ff
+ :highlight Comment guifg=#11f0c3 guibg=#ff00ff
<
If you are authoring a color scheme and use the same hexadecimal value
repeatedly, you can define a name for it in |v:colornames|. For
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 7c25a9a..f0400a6 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -231,7 +231,9 @@
'emoji' options.txt /*'emoji'*
'enc' options.txt /*'enc'*
'encoding' options.txt /*'encoding'*
+'endoffile' options.txt /*'endoffile'*
'endofline' options.txt /*'endofline'*
+'eof' options.txt /*'eof'*
'eol' options.txt /*'eol'*
'ep' options.txt /*'ep'*
'equalalways' options.txt /*'equalalways'*
@@ -598,7 +600,9 @@
'noek' options.txt /*'noek'*
'noemo' options.txt /*'noemo'*
'noemoji' options.txt /*'noemoji'*
+'noendoffile' options.txt /*'noendoffile'*
'noendofline' options.txt /*'noendofline'*
+'noeof' options.txt /*'noeof'*
'noeol' options.txt /*'noeol'*
'noequalalways' options.txt /*'noequalalways'*
'noerrorbells' options.txt /*'noerrorbells'*
@@ -7250,8 +7254,11 @@
g:html_ignore_conceal syntax.txt /*g:html_ignore_conceal*
g:html_ignore_folding syntax.txt /*g:html_ignore_folding*
g:html_line_ids syntax.txt /*g:html_line_ids*
+g:html_no_doc syntax.txt /*g:html_no_doc*
g:html_no_foldcolumn syntax.txt /*g:html_no_foldcolumn*
g:html_no_invalid syntax.txt /*g:html_no_invalid*
+g:html_no_links syntax.txt /*g:html_no_links*
+g:html_no_modeline syntax.txt /*g:html_no_modeline*
g:html_no_pre syntax.txt /*g:html_no_pre*
g:html_no_progress syntax.txt /*g:html_no_progress*
g:html_number_lines syntax.txt /*g:html_number_lines*
@@ -8418,6 +8425,7 @@
motion.txt motion.txt /*motion.txt*
mouse-mode-table term.txt /*mouse-mode-table*
mouse-overview term.txt /*mouse-overview*
+mouse-scrolling-off scroll.txt /*mouse-scrolling-off*
mouse-swap-buttons term.txt /*mouse-swap-buttons*
mouse-using term.txt /*mouse-using*
mouse_col-variable eval.txt /*mouse_col-variable*
diff --git a/runtime/doc/term.txt b/runtime/doc/term.txt
index 906e444..fdbcc7d 100644
--- a/runtime/doc/term.txt
+++ b/runtime/doc/term.txt
@@ -1,4 +1,4 @@
-*term.txt* For Vim version 9.0. Last change: 2022 Apr 23
+*term.txt* For Vim version 9.0. Last change: 2022 Oct 21
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -569,7 +569,7 @@
Vim supports using true colors in the terminal (taken from |highlight-guifg|
and |highlight-guibg|), given that the terminal supports this. To make this
work the 'termguicolors' option needs to be set.
-See https://gist.github.com/XVilka/8346728 for a list of terminals that
+See https://github.com/termstandard/colors for a list of terminals that
support true colors.
Sometimes setting 'termguicolors' is not enough and one has to set the |t_8f|
@@ -1005,6 +1005,8 @@
until the button is released, at which point the selection is per character
again.
+For scrolling with the mouse see |scroll-mouse-wheel|.
+
*gpm-mouse*
The GPM mouse is only supported when the |+mouse_gpm| feature was enabled at
compile time. The GPM mouse driver (Linux console) does not support quadruple
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index d6562d5..e1971b6 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt* For Vim version 9.0. Last change: 2022 Oct 16
+*todo.txt* For Vim version 9.0. Last change: 2022 Oct 28
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -41,10 +41,7 @@
'smoothscroll':
- CTRL-E and gj in long line with 'scrolloff' 5 not working well yet.
- computing 'scrolloff' position row use w_skipcol
-
-Check textprop right/above/below with 'number' set and "n" in 'cpo'.
-
-Don't do anything for ":!". #11372
+- PR: Error in screen dump for Test_smoothscroll_one_long_line. (PR #11436)
Further Vim9 improvements, possibly after launch:
@@ -164,6 +161,8 @@
- When 'encoding' is not utf-8, or the job is using another encoding, setup
conversions.
+Crash when a variable is removed while listing variables (Issue #11435)
+
Autoconf: must use autoconf 2.69, later version generates lots of warnings
- try using autoconf 2.71 and fix all "obsolete" warnings #11322
@@ -267,6 +266,9 @@
French spell files don't work correctly. #4916
Make Vim understand the format somehow?
+When 'spelloptions' is "camel" then zG doesn't work on some words.
+(Gary Johnson, 17 Oct 2022)
+
Make "g>" and "g<" in Visual mode move the text right or left.
Also for a block selection. #8558
@@ -340,6 +342,7 @@
So that replaying the register doesn't use keymap/langmap and still does the
same thing.
Also see #737: langmap not applied to replaying recording.
+Perhaps also related: #5147
Matchparen doesn't remove highlight after undo. (#7054)
Is OK when syntax HL is active.
@@ -380,6 +383,8 @@
Problem with auto-formatting - inserting space and putting cursor before added
character. (#6154)
+Auto-formatting comments joins a following non-comment line when the comment
+ends in a space. (Adam Levy, 18 Oct 2022)
When 'lazyredraw' is set sometimes the title is not updated.
(Jason Franklin, 2020 Feb 3) Looks like a race condition.
diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt
index 1d21e1a..56b3040 100644
--- a/runtime/doc/various.txt
+++ b/runtime/doc/various.txt
@@ -1,4 +1,4 @@
-*various.txt* For Vim version 9.0. Last change: 2022 Oct 13
+*various.txt* For Vim version 9.0. Last change: 2022 Oct 17
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -249,8 +249,7 @@
*:!cmd* *:!*
:!{cmd} Execute {cmd} with the shell. See also the 'shell'
- and 'shelltype' option. `:!` without a {cmd} is a no-op,
- it does nothing.
+ and 'shelltype' option.
*E34*
Any '!' in {cmd} is replaced with the previous
external command (see also 'cpoptions'). But not when