patch 9.1.0381: cbuffer and similar commands don't accept a range
Problem: cbuffer and similar quickfix and locationlist commands don't
accept a range, even so it is documented they should
(ilan-schemoul, after 8.1.1241)
Solution: Define ex commands with ADDR_LINES instead of ADDR_OTHER
fixes: #14638
closes: #14657
Signed-off-by: Christian Brabandt <cb@256bit.org>
diff --git a/src/ex_cmds.h b/src/ex_cmds.h
index 40dec4c..25f6914 100644
--- a/src/ex_cmds.h
+++ b/src/ex_cmds.h
@@ -271,7 +271,7 @@
ADDR_UNSIGNED),
EXCMD(CMD_caddbuffer, "caddbuffer", ex_cbuffer,
EX_RANGE|EX_WORD1|EX_TRLBAR,
- ADDR_OTHER),
+ ADDR_LINES),
EXCMD(CMD_caddexpr, "caddexpr", ex_cexpr,
EX_NEEDARG|EX_WORD1|EX_NOTRLCOM|EX_EXPR_ARG,
ADDR_NONE),
@@ -289,7 +289,7 @@
ADDR_NONE),
EXCMD(CMD_cbuffer, "cbuffer", ex_cbuffer,
EX_BANG|EX_RANGE|EX_WORD1|EX_TRLBAR,
- ADDR_OTHER),
+ ADDR_LINES),
EXCMD(CMD_cbefore, "cbefore", ex_cbelow,
EX_RANGE|EX_COUNT|EX_TRLBAR,
ADDR_UNSIGNED),
@@ -331,7 +331,7 @@
ADDR_NONE),
EXCMD(CMD_cgetbuffer, "cgetbuffer", ex_cbuffer,
EX_RANGE|EX_WORD1|EX_TRLBAR,
- ADDR_OTHER),
+ ADDR_LINES),
EXCMD(CMD_cgetexpr, "cgetexpr", ex_cexpr,
EX_NEEDARG|EX_WORD1|EX_NOTRLCOM|EX_EXPR_ARG,
ADDR_NONE),
@@ -820,7 +820,7 @@
ADDR_NONE),
EXCMD(CMD_laddbuffer, "laddbuffer", ex_cbuffer,
EX_RANGE|EX_WORD1|EX_TRLBAR,
- ADDR_OTHER),
+ ADDR_LINES),
EXCMD(CMD_laddfile, "laddfile", ex_cfile,
EX_TRLBAR|EX_FILE1,
ADDR_NONE),
@@ -832,7 +832,7 @@
ADDR_NONE),
EXCMD(CMD_lbuffer, "lbuffer", ex_cbuffer,
EX_BANG|EX_RANGE|EX_WORD1|EX_TRLBAR,
- ADDR_OTHER),
+ ADDR_LINES),
EXCMD(CMD_lbefore, "lbefore", ex_cbelow,
EX_RANGE|EX_COUNT|EX_TRLBAR,
ADDR_UNSIGNED),
@@ -886,7 +886,7 @@
ADDR_NONE),
EXCMD(CMD_lgetbuffer, "lgetbuffer", ex_cbuffer,
EX_RANGE|EX_WORD1|EX_TRLBAR,
- ADDR_OTHER),
+ ADDR_LINES),
EXCMD(CMD_lgetexpr, "lgetexpr", ex_cexpr,
EX_NEEDARG|EX_WORD1|EX_NOTRLCOM|EX_EXPR_ARG,
ADDR_NONE),
diff --git a/src/testdir/test_quickfix.vim b/src/testdir/test_quickfix.vim
index c784a2d..0b61815 100644
--- a/src/testdir/test_quickfix.vim
+++ b/src/testdir/test_quickfix.vim
@@ -6496,4 +6496,74 @@
call setqflist([], 'f')
endfunc
+func XbufferTests_range(cchar)
+ call s:setup_commands(a:cchar)
+
+ enew!
+ let lines =<< trim END
+ Xtestfile7:700:10:Line 700
+ Xtestfile8:800:15:Line 800
+ END
+ silent! call setline(1, lines)
+ norm! Vy
+ " Note: We cannot use :Xbuffer here,
+ " it doesn't properly fail, so we need to
+ " test using the raw c/l commands.
+ " (also further down)
+ if (a:cchar == 'c')
+ exe "'<,'>cbuffer!"
+ else
+ exe "'<,'>lbuffer!"
+ endif
+ let l = g:Xgetlist()
+ call assert_true(len(l) == 1 &&
+ \ l[0].lnum == 700 && l[0].col == 10 && l[0].text ==# 'Line 700')
+
+ enew!
+ let lines =<< trim END
+ Xtestfile9:900:55:Line 900
+ Xtestfile10:950:66:Line 950
+ END
+ silent! call setline(1, lines)
+ if (a:cchar == 'c')
+ 1cgetbuffer
+ else
+ 1lgetbuffer
+ endif
+ let l = g:Xgetlist()
+ call assert_true(len(l) == 1 &&
+ \ l[0].lnum == 900 && l[0].col == 55 && l[0].text ==# 'Line 900')
+
+ enew!
+ let lines =<< trim END
+ Xtestfile11:700:20:Line 700
+ Xtestfile12:750:25:Line 750
+ END
+ silent! call setline(1, lines)
+ if (a:cchar == 'c')
+ 1,1caddbuffer
+ else
+ 1,1laddbuffer
+ endif
+ let l = g:Xgetlist()
+ call assert_true(len(l) == 2 &&
+ \ l[0].lnum == 900 && l[0].col == 55 && l[0].text ==# 'Line 900' &&
+ \ l[1].lnum == 700 && l[1].col == 20 && l[1].text ==# 'Line 700')
+ enew!
+
+ " Check for invalid range
+ " Using Xbuffer will not run the range check in the cbuffer/lbuffer
+ " commands. So directly call the commands.
+ if (a:cchar == 'c')
+ call assert_fails('900,999caddbuffer', 'E16:')
+ else
+ call assert_fails('900,999laddbuffer', 'E16:')
+ endif
+endfunc
+
+func Test_cbuffer_range()
+ call XbufferTests_range('c')
+ call XbufferTests_range('l')
+endfunc
+
" vim: shiftwidth=2 sts=2 expandtab
diff --git a/src/version.c b/src/version.c
index 107039f..aadb49d 100644
--- a/src/version.c
+++ b/src/version.c
@@ -705,6 +705,8 @@
static int included_patches[] =
{ /* Add new patch number below this line */
/**/
+ 381,
+/**/
380,
/**/
379,