diff --git a/runtime/doc/editing.txt b/runtime/doc/editing.txt
index 17a8ca3..977a94d 100644
--- a/runtime/doc/editing.txt
+++ b/runtime/doc/editing.txt
@@ -1,4 +1,4 @@
-*editing.txt*   For Vim version 7.3.  Last change: 2011 Feb 26
+*editing.txt*   For Vim version 7.3.  Last change: 2012 Mar 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -1159,8 +1159,10 @@
 							*:confirm* *:conf*
 :conf[irm] {command}	Execute {command}, and use a dialog when an
 			operation has to be confirmed.  Can be used on the
-			":q", ":qa" and ":w" commands (the latter to over-ride
-			a read-only setting).
+			|:q|, |:qa| and |:w| commands (the latter to override
+			a read-only setting), and any other command that can
+			fail in such a way, such as |:only|, |:buffer|,
+			|:bdelete|, etc.
 
 Examples: >
   :confirm w foo
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index ce4c41b..cb0dbc0 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt*	For Vim version 7.3.  Last change: 2012 Mar 07
+*eval.txt*	For Vim version 7.3.  Last change: 2012 Mar 28
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -3473,7 +3473,8 @@
 		matches, they are separated by <NL> characters.
 
 		If the expansion fails, the result is an empty String or List.
-		A name for a non-existing file is not included.
+		A name for a non-existing file is not included.  A symbolic
+		link is only included if it points to an existing file.
 
 		For most systems backticks can be used to get files names from
 		any external command.  Example: >
@@ -5779,9 +5780,9 @@
 		omitted the current tab page is used.
 		When {arg} is invalid the number zero is returned.
 		To get a list of all buffers in all tabs use this: >
-			tablist = []
+			let buflist = []
 			for i in range(tabpagenr('$'))
-			   call extend(tablist, tabpagebuflist(i + 1))
+			   call extend(buflist, tabpagebuflist(i + 1))
 			endfor
 <		Note that a buffer may appear in more than one window.
 
@@ -6003,7 +6004,7 @@
 		would be of unlimited width.  When there is a <Tab> at the
 		position, the returned Number will be the column at the end of
 		the <Tab>.  For example, for a <Tab> in column 1, with 'ts'
-		set to 8, it returns 8.
+		set to 8, it returns 8. |conceal| is ignored.
 		For the byte position use |col()|.
 		For the use of {expr} see |col()|.
 		When 'virtualedit' is used {expr} can be [lnum, col, off], where
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 23ac10a..2c79617 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.3.  Last change: 2012 Feb 22
+*options.txt*	For Vim version 7.3.  Last change: 2012 Mar 28
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -3772,9 +3772,10 @@
 'highlight' 'hl'	string	(default (as a single string):
 				     "8:SpecialKey,@:NonText,d:Directory,
 				     e:ErrorMsg,i:IncSearch,l:Search,m:MoreMsg,
-				     M:ModeMsg,n:LineNr,r:Question,
-				     s:StatusLine,S:StatusLineNC,c:VertSplit,
-				     t:Title,v:Visual,w:WarningMsg,W:WildMenu,
+				     M:ModeMsg,n:LineNr,N:CursorLineNr,
+				     r:Question,s:StatusLine,S:StatusLineNC,
+				     c:VertSplit, t:Title,v:Visual,
+				     w:WarningMsg,W:WildMenu,
 				     f:Folded,F:FoldColumn,A:DiffAdd,
 				     C:DiffChange,D:DiffDelete,T:DiffText,
 				     >:SignColumn,B:SpellBad,P:SpellCap,
@@ -3800,6 +3801,7 @@
 	|hl-ModeMsg|	 M  Mode (e.g., "-- INSERT --")
 	|hl-LineNr|	 n  line number for ":number" and ":#" commands, and
 			    when 'number' or 'relativenumber' option is set.
+	|hl-CursorLineNr|  N like n for when 'cursorline' is set.
 	|hl-Question|	 r  |hit-enter| prompt and yes/no questions
 	|hl-StatusLine|	 s  status line of current window |status-line|
 	|hl-StatusLineNC| S  status lines of not-current windows
@@ -5078,7 +5080,8 @@
 	number.
 	When a long, wrapped line doesn't start with the first character, '-'
 	characters are put before the number.
-	See |hl-LineNr| for the highlighting used for the number.
+	See |hl-LineNr|  and |hl-CursorLineNr| for the highlighting used for
+	the number.
 	When setting this option, 'relativenumber' is reset.
 
 						*'numberwidth'* *'nuw'*
@@ -5477,7 +5480,8 @@
 	number.
 	When a long, wrapped line doesn't start with the first character, '-'
 	characters are put before the number.
-	See |hl-LineNr| for the highlighting used for the number.
+	See |hl-LineNr|  and |hl-CursorLineNr| for the highlighting used for
+	the number.
 	When setting this option, 'number' is reset.
 
 						*'remap'* *'noremap'*
@@ -6563,6 +6567,9 @@
 	evaluated and the result is used as the option value.  Example: >
 		:set statusline=%!MyStatusLine()
 <	The result can contain %{} items that will be evaluated too.
+	Note that the "%!" expression is evaluated in the context of the
+	current window and buffer, while %{} items are evaluated in the
+	context of the window that the statusline belongs to.
 
 	When there is error while evaluating the option then it will be made
 	empty to avoid further errors.  Otherwise screen updating would loop.
diff --git a/runtime/doc/repeat.txt b/runtime/doc/repeat.txt
index eec13c0..9a97321 100644
--- a/runtime/doc/repeat.txt
+++ b/runtime/doc/repeat.txt
@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 7.3.  Last change: 2011 Jan 06
+*repeat.txt*    For Vim version 7.3.  Last change: 2012 Mar 23
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -109,7 +109,7 @@
 			it was the result of a mapping)  {Vi: no recording}
 
 							*@*
-@{0-9a-z".=*}		Execute the contents of register {0-9a-z".=*} [count]
+@{0-9a-z".=*+}		Execute the contents of register {0-9a-z".=*+} [count]
 			times.  Note that register '%' (name of the current
 			file) and '#' (name of the alternate file) cannot be
 			used.
@@ -123,8 +123,8 @@
 							*@@* *E748*
 @@			Repeat the previous @{0-9a-z":*} [count] times.
 
-:[addr]*{0-9a-z".=}						*:@* *:star*
-:[addr]@{0-9a-z".=*}	Execute the contents of register {0-9a-z".=*} as an Ex
+:[addr]*{0-9a-z".=+}						*:@* *:star*
+:[addr]@{0-9a-z".=*+}	Execute the contents of register {0-9a-z".=*+} as an Ex
 			command.  First set cursor at line [addr] (default is
 			current line).  When the last line in the register does
 			not have a <CR> it will be added automatically when
diff --git a/runtime/doc/starting.txt b/runtime/doc/starting.txt
index e390e4c..84dc78b 100644
--- a/runtime/doc/starting.txt
+++ b/runtime/doc/starting.txt
@@ -1,4 +1,4 @@
-*starting.txt*  For Vim version 7.3.  Last change: 2011 Jul 22
+*starting.txt*  For Vim version 7.3.  Last change: 2012 Mar 16
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -248,7 +248,8 @@
 		{not in Vi}
 
 							*-g*
--g		Start Vim in GUI mode.  See |gui|.  {not in Vi}
+-g		Start Vim in GUI mode.  See |gui|. For the opposite see |-v|.
+		{not in Vi}
 
 							*-v*
 -v		Start Ex in Vi mode.  Only makes a difference when the
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index e480968..4bd181a 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 7.3.  Last change: 2012 Feb 11
+*syntax.txt*	For Vim version 7.3.  Last change: 2012 Mar 28
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -199,7 +199,8 @@
 If you don't like a distributed syntax file, or you have downloaded a new
 version, follow the same steps as for |mysyntaxfile| above.  Just make sure
 that you write the syntax file in a directory that is early in 'runtimepath'.
-Vim will only load the first syntax file found.
+Vim will only load the first syntax file found, assuming that it sets
+b:current_syntax.
 
 
 NAMING CONVENTIONS		    *group-name* *{group-name}* *E669* *W18*
@@ -754,7 +755,8 @@
 c_ansi_typedefs		 ... but do standard ANSI types
 c_ansi_constants	 ... but do standard ANSI constants
 c_no_utf		don't highlight \u and \U in strings
-c_syntax_for_h		use C syntax for *.h files, instead of C++
+c_syntax_for_h		for *.h files use C syntax instead of C++ and use objc
+			syntax instead of objcpp
 c_no_if0		don't highlight "#if 0" blocks as comments
 c_no_cformat		don't highlight %-formats in strings
 c_no_c99		don't highlight C99 standard items
@@ -4421,6 +4423,8 @@
 							*hl-LineNr*
 LineNr		Line number for ":number" and ":#" commands, and when 'number'
 		or 'relativenumber' option is set.
+							*hl-CursorLineNr*
+CursorLineNr	Like LineNr when 'cursorline' is set for the cursor line.
 							*hl-MatchParen*
 MatchParen	The character under the cursor or just before it, if it
 		is a paired bracket, and its match. |pi_paren.txt|
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 4b8ff6e..0ddf7cc 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.3.  Last change: 2012 Mar 07
+*todo.txt*      For Vim version 7.3.  Last change: 2012 Mar 28
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -34,6 +34,8 @@
 							*known-bugs*
 -------------------- Known bugs and current work -----------------------
 
+Go through list of maintainers that didn't respond. (Thilo Six, Mar 19)
+
 Go through more coverity reports.
 
 Discussion about canonicalization of Hebrew. (Ron Aaron, 2011 April 10)
@@ -63,11 +65,8 @@
 the window to move unnecessarily. (William E. Skeith III, 2012 Jan 12)
 Patch: 2012 Jan 13  Needs more work (2012 Feb 2)
 
-Patch to highlight cursor line number. (Howard Buchholz (lhb), 2011 Oct 18)
-
 URXVT:
 - will get stuck if byte sequence does not containe expected semicolon.
-- Patch for urxvt mouse support after shell command. (Issue 31)
 - Use urxvt mouse support also in xterm.  Explanations:
   http://www.midnight-commander.org/ticket/2662
 
@@ -79,15 +78,6 @@
 dialog, there is no dialog to ask whether the existing file should be
 overwritten. (Felipe G. Nievinski, 2011 Dec 22)
 
-Patch for improved ":qa" behavior. (Hirohito Higashi, 2012 Feb 18)
-
-Recognize objcpp. (Austin Ziegler, 2012 Feb 15)
-
-7   Setting an option always sets "w_set_curswant", while this is only
-    required for a few options.  Only do it for those options to avoid the
-    side effect.
-Patch by Kana Natsuno, 2011 Nov 12.
-
 Using Ctrl-] in a mapping does not expand abbreviations. Patch by Christian
 Brabandt, 2012 Mar 2.
 
@@ -99,8 +89,6 @@
 (Lech Lorens, 2011 Nov 27)
 Isn't this already possible?  Update 2012 Feb 15.
 
-Patch for using objcpp file type for headers files. Issue 44.
-
 Docs fix for v:register. (Ingo Karkat, 2011 Sep 26, 27)
 v:register doesn't work exactly as expected. (David Fishburn, 2011 Sep 20)
 
@@ -123,6 +111,9 @@
 
 Patch to add completion for :history command.  (Dominique Pelle, 2012 Feb 26)
 
+Patch for 'backupcopy' default behavior for symlinks on Windows. (David Pope,
+2012 Mar 21)
+
 Use a count before "v" and "V" to select that many characters or lines?
 (Kikyous)
 
@@ -195,6 +186,9 @@
 Win32: Cannot cd into a directory that starts with a space. (Andy Wokula, 2012
 Jan 19)
 
+Win32: default for 'backupcopy' is wrong for a symbolic link. (mklink one
+two). (Benjamin Fritz, 2012 Mar 15)
+
 Need to escape $HOME on Windows?  (ZyX, 2011 Jul 21)
 
 "2" in 'formatopions' not working in comments. (Christian Corneliussen, 2011
@@ -511,6 +505,8 @@
 Test 51 fails when language set to German. (Marco, 2011 Jan 9)
 Dominique can't reproduc it.
 
+'ambiwidth' should be global-local.
+
 ":function f(x) keepjumps" creates a function where every command is executed
 like it has ":keepjumps" before it.
 
diff --git a/runtime/doc/usr_41.txt b/runtime/doc/usr_41.txt
index 0e85688..77f7d1c 100644
--- a/runtime/doc/usr_41.txt
+++ b/runtime/doc/usr_41.txt
@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 7.3.  Last change: 2011 Dec 15
+*usr_41.txt*	For Vim version 7.3.  Last change: 2012 Mar 16
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
@@ -1710,6 +1710,7 @@
  12	set cpo&vim
  ..
  42	let &cpo = s:save_cpo
+ 43	unlet s:save_cpo
 
 We first store the old value of 'cpoptions' in the s:save_cpo variable.  At
 the end of the plugin this value is restored.
@@ -1956,6 +1957,7 @@
  40	endif
  41
  42	let &cpo = s:save_cpo
+ 43	unlet s:save_cpo
 
 Line 33 wasn't explained yet.  It applies the new correction to the word under
 the cursor.  The |:normal| command is used to use the new abbreviation.  Note