runtime(netrw): remove comment separators

closes: #17514

Signed-off-by: Luca Saccarola <github.e41mv@aleeas.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
diff --git a/runtime/pack/dist/opt/netrw/autoload/netrw.vim b/runtime/pack/dist/opt/netrw/autoload/netrw.vim
index 45034d2..5f33f8c 100644
--- a/runtime/pack/dist/opt/netrw/autoload/netrw.vim
+++ b/runtime/pack/dist/opt/netrw/autoload/netrw.vim
@@ -29,11 +29,8 @@
 let s:keepcpo= &cpo
 setl cpo&vim
 
-" ======================
 "  Netrw Variables: {{{1
-" ======================
 
-" ---------------------------------------------------------------------
 " netrw#ErrorMsg: {{{2
 "   0=note     = s:NOTE
 "   1=warning  = s:WARNING
@@ -50,7 +47,6 @@
     endif
 endfunction
 
-" ---------------------------------------------------------------------
 " s:NetrwInit: initializes variables if they haven't been defined {{{2
 "            Loosely,  varname = value.
 fun s:NetrwInit(varname,value)
@@ -67,7 +63,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 "  Netrw Constants: {{{2
 call s:NetrwInit("g:netrw_dirhistcnt",0)
 if !exists("s:LONGLIST")
@@ -89,14 +84,12 @@
             \ exists("g:syntax_on") &&
             \ !exists("g:netrw_nobeval")
 
-" ---------------------------------------------------------------------
 " Default option values: {{{2
 call s:NetrwInit("g:netrw_localcopycmdopt","")
 call s:NetrwInit("g:netrw_localcopydircmdopt","")
 call s:NetrwInit("g:netrw_localmkdiropt","")
 call s:NetrwInit("g:netrw_localmovecmdopt","")
 
-" ---------------------------------------------------------------------
 " Default values for netrw's global protocol variables {{{2
 
 if !exists("g:netrw_dav_cmd")
@@ -177,7 +170,6 @@
   let s:netrw_rcpmode    = ''
 endif
 
-" ---------------------------------------------------------------------
 " Default values for netrw's global variables {{{2
 " Cygwin Detection ------- {{{3
 if !exists("g:netrw_cygwin")
@@ -427,7 +419,6 @@
 call s:NetrwInit("g:netrw_winsize",50)
 call s:NetrwInit("g:netrw_wiw",1)
 if g:netrw_winsize > 100|let g:netrw_winsize= 100|endif
-" ---------------------------------------------------------------------
 " Default values for netrw's script variables: {{{2
 call s:NetrwInit("g:netrw_fname_escape",' ?&;%')
 if has("win32")
@@ -449,9 +440,7 @@
 "  Has a side effect that doau BufReadPost doesn't work, so
 "  files read by network transfer aren't appropriately highlighted.
 
-" ======================
 "  Netrw Initialization: {{{1
-" ======================
 if s:has_balloon
   let &l:bexpr = "netrw#BalloonHelp()"
   au FileType netrw setl beval
@@ -468,11 +457,8 @@
   com! -nargs=*  NetrwKeepj      <args>
 endif
 
-" ==============================
 "  Netrw Utility Functions: {{{1
-" ==============================
 
-" ---------------------------------------------------------------------
 " netrw#BalloonHelp: {{{2
 
 if s:has_balloon
@@ -516,7 +502,6 @@
     endfunction
 endif
 
-" ------------------------------------------------------------------------
 " netrw#Explore: launch the local browser in the directory of the current file {{{2
 "          indx:  == -1: Nexplore
 "                 == -2: Pexplore
@@ -934,7 +919,6 @@
   sil! let @/ = keepregslash
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#Lexplore: toggle Explorer window, keeping it on the left of the current tab {{{2
 "   Uses  g:netrw_chgwin  : specifies the window where Lexplore files are to be opened
 "         t:netrw_lexposn : winsaveview() output (used on Lexplore window)
@@ -1032,7 +1016,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#MakeTgt: make a target out of the directory name provided {{{2
 fun! netrw#MakeTgt(dname)
   " simplify the target (eg. /abc/def/../ghi -> /abc/ghi)
@@ -1055,7 +1038,6 @@
   call winrestview(svpos)
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#Obtain: {{{2
 "   netrw#Obtain(islocal,fname[,tgtdirectory])
 "     islocal=0  obtain from remote source
@@ -1260,7 +1242,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#Nread: save position, call netrw#NetRead(), and restore position {{{2
 fun! netrw#Nread(mode,fname)
   let svpos= winsaveview()
@@ -1275,7 +1256,6 @@
   endif
 endfun
 
-" ------------------------------------------------------------------------
 " s:NetrwOptionsSave: save options prior to setting to "netrw-buffer-standard" form {{{2
 "             Options get restored by s:NetrwOptionsRestore()
 "
@@ -1354,7 +1334,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwOptionsSafe: sets options to help netrw do its job {{{2
 "                     Use  s:NetrwSaveOptions() to save user settings
 "                     Use  s:NetrwOptionsRestore() to restore user settings
@@ -1409,7 +1388,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwOptionsRestore: restore options (based on prior s:NetrwOptionsSave) {{{2
 fun! s:NetrwOptionsRestore(vt)
   if !exists("{a:vt}netrw_optionsave")
@@ -1515,7 +1493,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwSetSafeSetting: sets an option to a safe setting {{{2
 "                        but only when the options' value and the safe setting differ
 "                        Doing this means that netrw will not come up as having changed a
@@ -1541,7 +1518,6 @@
 
 endfun
 
-" ------------------------------------------------------------------------
 " s:NetrwRestoreSetting: restores specified setting using associated keepvar, {{{2
 "                        but only if the setting value differs from the associated keepvar.
 "                        Doing this means that netrw will not come up as having changed a
@@ -1575,7 +1551,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " NetrwStatusLine: {{{2
 fun! NetrwStatusLine()
 
@@ -1608,11 +1583,8 @@
   endif
 endfun
 
-" ===============================
 "  Netrw Transfer Functions: {{{1
-" ===============================
 
-" ------------------------------------------------------------------------
 " netrw#NetRead: responsible for reading a file over the net {{{2
 "   mode: =0 read remote file and insert before current line
 "         =1 read remote file and insert after current line
@@ -1987,7 +1959,6 @@
 
 endfun
 
-" ------------------------------------------------------------------------
 " netrw#NetWrite: responsible for writing a file over the net {{{2
 fun! netrw#NetWrite(...) range
 
@@ -2327,7 +2298,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#NetSource: source a remotely hosted Vim script {{{2
 " uses NetRead to get a copy of the file into a temporarily file,
 "              then sources that file,
@@ -2363,7 +2333,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#SetTreetop: resets the tree top to the current directory/specified directory {{{2
 "                   (implements the :Ntree command)
 fun! netrw#SetTreetop(iscmd,...)
@@ -2411,7 +2380,6 @@
 
 endfun
 
-" ===========================================
 " s:NetrwGetFile: Function to read temporary file "tfile" with command "readcmd". {{{2
 "    readcmd == %r : replace buffer with newly read file
 "            == 0r : read file at top of buffer
@@ -2510,7 +2478,6 @@
 
 endfun
 
-" ------------------------------------------------------------------------
 " s:NetrwMethod:  determine method of transfer {{{2
 " Input:
 "   choice = url   [protocol:]//[userid@]hostname[:port]/[path-to-file]
@@ -2755,7 +2722,6 @@
     return a:hostname =~? '^[a-z0-9]'
 endfun
 
-" ---------------------------------------------------------------------
 " NetUserPass: set username and password for subsequent ftp transfer {{{2
 "   Usage:  :call NetUserPass()                        -- will prompt for userid and password
 "           :call NetUserPass("uid")                   -- will prompt for password
@@ -2854,11 +2820,8 @@
 
 endfun
 
-" =================================
 "  Shared Browsing Support:    {{{1
-" =================================
 
-" ---------------------------------------------------------------------
 " s:ExplorePatHls: converts an Explore pattern into a regular expression search pattern {{{2
 fun! s:ExplorePatHls(pattern)
   let repat= substitute(a:pattern,'^**/\{1,2}','','')
@@ -2867,7 +2830,6 @@
   return repat
 endfun
 
-" ---------------------------------------------------------------------
 "  s:NetrwBookHistHandler: {{{2
 "    0: (user: <mb>)   bookmark current directory
 "    1: (user: <gb>)   change to the bookmarked directory
@@ -3027,7 +2989,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBookHistRead: this function reads bookmarks and history {{{2
 "  Will source the history file (.netrwhist) only if the g:netrw_disthistmax is > 0.
 "                      Sister function: s:NetrwBookHistSave()
@@ -3059,7 +3020,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBookHistSave: this function saves bookmarks and history to files {{{2
 "                      Sister function: s:NetrwBookHistRead()
 "                      I used to do this via viminfo but that appears to
@@ -3140,7 +3100,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBrowse: This function uses the command in g:netrw_list_cmd to provide a {{{2
 "  list of the contents of a local or remote directory.  It is assumed that the
 "  g:netrw_list_cmd has a string, USEPORT HOSTNAME, that needs to be substituted
@@ -3389,7 +3348,6 @@
   return
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwFile: because of g:netrw_keepdir, isdirectory(), type(), etc may or {{{2
 " may not apply correctly; ie. netrw's idea of the current directory may
 " differ from vim's.  This function insures that netrw's idea of the current
@@ -3434,7 +3392,6 @@
   return ret
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwFileInfo: supports qf (query for file information) {{{2
 fun! s:NetrwFileInfo(islocal,fname)
   let ykeep= @@
@@ -3479,7 +3436,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwGetBuffer: [get a new|find an old netrw] buffer for a netrw listing {{{2
 "   returns 0=cleared buffer
 "           1=re-used buffer (buffer not cleared)
@@ -3611,7 +3567,6 @@
   return 0
 endfun
 
-" ---------------------------------------------------------------------
 "  s:NetrwGetWord: it gets the directory/file named under the cursor {{{2
 fun! s:NetrwGetWord()
   let keepsol= &l:sol
@@ -3718,7 +3673,6 @@
   return dirname
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwListSettings: make standard settings for making a netrw listing {{{2
 "                      g:netrw_bufsettings will be used after the listing is produced.
 "                      Called by s:NetrwGetBuffer()
@@ -3739,7 +3693,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 "  s:NetrwListStyle: change list style (thin - long - wide - tree) {{{2
 "  islocal=0: remote browsing
 "         =1: local browsing
@@ -3798,7 +3751,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBannerCtrl: toggles the display of the banner {{{2
 fun! s:NetrwBannerCtrl(islocal)
   let ykeep= @@
@@ -3821,7 +3773,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBookmark: supports :NetrwMB[!] [file]s                 {{{2
 "
 "  No bang: enters files/directories into Netrw's bookmark system
@@ -3887,7 +3838,6 @@
   call s:NetrwBookmarkMenu()
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBookmarkMenu: Uses menu priorities {{{2
 "                      .2.[cnt] for bookmarks, and
 "                      .3.[cnt] for history
@@ -3946,7 +3896,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 "  s:NetrwBrowseChgDir: constructs a new directory based on the current {{{2
 "                       directory and a new directory name.  Also, if the
 "                       "new directory name" is actually a file,
@@ -4285,7 +4234,6 @@
   return dirname
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBrowseUpDir: implements the "-" mappings {{{2
 "    for thin, long, and wide: cursor placed just after banner
 "    for tree, keeps cursor on current filename
@@ -4350,7 +4298,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#BrowseX:  (implements "x") executes a special "viewer" script or program for the {{{2
 "              given filename; typically this means given their extension.
 "              0=local, 1=remote
@@ -4453,7 +4400,6 @@
   let &aw= awkeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBufRename: renames a buffer without the side effect of retaining an unlisted buffer having the old name {{{2
 "                   Using the file command on a "[No Name]" buffer does not seem to cause the old "[No Name]" buffer
 "                   to become an unlisted buffer, so in that case don't bwipe it.
@@ -4471,7 +4417,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#CheckIfRemote: returns 1 if current file looks like an url, 0 else {{{2
 fun! netrw#CheckIfRemote(...)
   if a:0 > 0
@@ -4486,7 +4431,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwChgPerm: (implements "gp") change file permission {{{2
 fun! s:NetrwChgPerm(islocal,curdir)
   let ykeep  = @@
@@ -4505,7 +4449,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwClearExplore: clear explore variables (if any) {{{2
 fun! s:NetrwClearExplore()
   2match none
@@ -4521,7 +4464,6 @@
   "   redraw!
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwEditBuf: decides whether or not to use keepalt to edit a buffer {{{2
 fun! s:NetrwEditBuf(bufnum)
   if exists("g:netrw_altfile") && g:netrw_altfile && &ft == "netrw"
@@ -4531,7 +4473,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwEditFile: decides whether or not to use keepalt to edit a file {{{2
 "    NetrwKeepj [keepalt] <OPT> <CMD> <FILENAME>
 fun! s:NetrwEditFile(cmd,opt,fname)
@@ -4545,7 +4486,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwExploreListUniq: {{{2
 fun! s:NetrwExploreListUniq(explist)
   " this assumes that the list is already sorted
@@ -4559,7 +4499,6 @@
   return newexplist
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwForceChgDir: (gd support) Force treatment as a directory {{{2
 fun! s:NetrwForceChgDir(islocal,newdir)
   let ykeep= @@
@@ -4581,7 +4520,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwForceFile: (gf support) Force treatment as a file {{{2
 fun! s:NetrwForceFile(islocal,newfile)
   if a:newfile =~ '[/@*=|\\]$'
@@ -4596,7 +4534,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwHide: this function is invoked by the "a" map for browsing {{{2
 "          and switches the hiding mode.  The actual hiding is done by
 "          s:NetrwListHide().
@@ -4645,7 +4582,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwHideEdit: allows user to edit the file/directory hiding list {{{2
 fun! s:NetrwHideEdit(islocal)
   let ykeep= @@
@@ -4666,7 +4602,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwHidden: invoked by "gh" {{{2
 fun! s:NetrwHidden(islocal)
   let ykeep= @@
@@ -4691,7 +4626,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 "  s:NetrwHome: this function determines a "home" for saving bookmarks and history {{{2
 function! s:NetrwHome()
     if has('nvim')
@@ -4733,7 +4667,6 @@
     return home
 endfunction
 
-" ---------------------------------------------------------------------
 " s:NetrwLeftmouse: handles the <leftmouse> when in a netrw browsing window {{{2
 fun! s:NetrwLeftmouse(islocal)
   if exists("s:netrwdrag")
@@ -4779,7 +4712,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwCLeftmouse: used to select a file/directory for a target {{{2
 fun! s:NetrwCLeftmouse(islocal)
   if &ft != "netrw"
@@ -4788,7 +4720,6 @@
   call s:NetrwMarkFileTgt(a:islocal)
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwServerEdit: edit file in a server gvim, usually NETRWSERVER  (implements <c-r>){{{2
 "   a:islocal=0 : <c-r> not used, remote
 "   a:islocal=1 : <c-r> not used, local
@@ -4891,7 +4822,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwSLeftmouse: marks the file under the cursor.  May be dragged to select additional files {{{2
 fun! s:NetrwSLeftmouse(islocal)
   if &ft != "netrw"
@@ -4903,7 +4833,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwSLeftdrag: invoked via a shift-leftmouse and dragging {{{2
 "                   Used to mark multiple files.
 fun! s:NetrwSLeftdrag(islocal)
@@ -4922,7 +4851,6 @@
   let s:ngw= ngw
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwSLeftrelease: terminates shift-leftmouse dragging {{{2
 fun! s:NetrwSLeftrelease(islocal)
   if exists("s:netrwdrag")
@@ -4938,7 +4866,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwListHide: uses [range]g~...~d to delete files that match       {{{2
 "                  comma-separated patterns given in g:netrw_list_hide
 fun! s:NetrwListHide()
@@ -4988,7 +4915,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMakeDir: this function makes a directory (both local and remote) {{{2
 "                 implements the "d" mapping.
 fun! s:NetrwMakeDir(usrhost)
@@ -5103,7 +5029,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:TreeSqueezeDir: allows a shift-cr (gvim only) to squeeze the current tree-listing directory {{{2
 fun! s:TreeSqueezeDir(islocal)
   if exists("w:netrw_liststyle") && w:netrw_liststyle == s:TREELIST && exists("w:netrw_treedict")
@@ -5128,7 +5053,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMaps: {{{2
 fun! s:NetrwMaps(islocal)
 
@@ -5381,7 +5305,6 @@
   endif " }}}3
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwCommands: set up commands                              {{{2
 "  If -buffer, the command is only available from within netrw buffers
 "  Otherwise, the command is available from any window, so long as netrw
@@ -5400,7 +5323,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFiles: apply s:NetrwMarkFile() to named file(s) {{{2
 "                   glob()ing only works with local files
 fun! s:NetrwMarkFiles(islocal,...)
@@ -5419,7 +5341,6 @@
   endwhile
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkTarget: implements :MT (mark target) {{{2
 fun! s:NetrwMarkTarget(...)
   if a:0 == 0 || (a:0 == 1 && a:1 == "")
@@ -5437,7 +5358,6 @@
   call winrestview(svpos)
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFile: (invoked by mf) This function is used to both {{{2
 "                  mark and unmark files.  If a markfile list exists,
 "                  then the rename and delete functions will use it instead
@@ -5547,7 +5467,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileArgList: ma: move the marked file list to the argument list (tomflist=0) {{{2
 "                         mA: move the argument list to marked file list     (tomflist=1)
 "                            Uses the global marked file list
@@ -5581,7 +5500,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileCompress: (invoked by mz) This function is used to {{{2
 "                          compress/decompress files using the programs
 "                          in g:netrw_compress and g:netrw_uncompress,
@@ -5645,7 +5563,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileCopy: (invoked by mc) copy marked files to target {{{2
 "                      If no marked files, then set up directory as the
 "                      target.  Currently does not support copying entire
@@ -5833,7 +5750,6 @@
   return 1
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileDiff: (invoked by md) This function is used to {{{2
 "                      invoke vim's diff mode on the marked files.
 "                      Either two or three files can be so handled.
@@ -5868,7 +5784,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileEdit: (invoked by me) put marked files on arg list and start editing them {{{2
 "                       Uses global markfilelist
 fun! s:NetrwMarkFileEdit(islocal)
@@ -5894,7 +5809,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileQFEL: convert a quickfix-error or location list into a marked file list {{{2
 fun! s:NetrwMarkFileQFEL(islocal,qfel)
   call s:NetrwUnmarkAll()
@@ -5919,7 +5833,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileExe: (invoked by mx and mX) execute arbitrary system command on marked files {{{2
 "                     mx enbloc=0: Uses the local marked-file list, applies command to each file individually
 "                     mX enbloc=1: Uses the global marked-file list, applies command to entire list
@@ -6019,7 +5932,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkHideSfx: (invoked by mh) (un)hide files having same suffix
 "                  as the marked file(s) (toggles suffix presence)
 "                  Uses the local marked file list.
@@ -6071,7 +5983,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileVimCmd: (invoked by mv) execute arbitrary vim command on marked files, one at a time {{{2
 "                     Uses the local marked-file list.
 fun! s:NetrwMarkFileVimCmd(islocal)
@@ -6118,7 +6029,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkHideSfx: (invoked by mh) (un)hide files having same suffix
 "                  as the marked file(s) (toggles suffix presence)
 "                  Uses the local marked file list.
@@ -6170,7 +6080,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileGrep: (invoked by mg) This function applies vimgrep to marked files {{{2
 "                     Uses the global markfilelist
 fun! s:NetrwMarkFileGrep(islocal)
@@ -6222,7 +6131,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileMove: (invoked by mm) execute arbitrary command on marked files, one at a time {{{2
 "                      uses the global marked file list
 "                      s:netrwmfloc= 0: target directory is remote
@@ -6331,7 +6239,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFilePrint: (invoked by mp) This function prints marked files {{{2
 "                       using the hardcopy command.  Local marked-file list only.
 fun! s:NetrwMarkFilePrint(islocal)
@@ -6365,7 +6272,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileRegexp: (invoked by mr) This function is used to mark {{{2
 "                        files when given a regexp (for which a prompt is
 "                        issued) (matches to name of files).
@@ -6435,7 +6341,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileSource: (invoked by ms) This function sources marked files {{{2
 "                        Uses the local marked file list.
 fun! s:NetrwMarkFileSource(islocal)
@@ -6466,7 +6371,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileTag: (invoked by mT) This function applies g:netrw_ctags to marked files {{{2
 "                     Uses the global markfilelist
 fun! s:NetrwMarkFileTag(islocal)
@@ -6508,7 +6412,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMarkFileTgt:  (invoked by mt) This function sets up a marked file target {{{2
 "   Sets up two variables,
 "     s:netrwmftgt         : holds the target directory
@@ -6578,7 +6481,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwGetCurdir: gets current directory and sets up b:netrw_curdir if necessary {{{2
 fun! s:NetrwGetCurdir(islocal)
 
@@ -6598,7 +6500,6 @@
   return b:netrw_curdir
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwOpenFile: query user for a filename and open it {{{2
 fun! s:NetrwOpenFile(islocal)
   let ykeep= @@
@@ -6643,7 +6544,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#Shrink: shrinks/expands a netrw or Lexplorer window {{{2
 "               For the mapping to this function be made via
 "               netrwPlugin, you'll need to have had
@@ -6687,7 +6587,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetSortSequence: allows user to edit the sorting sequence {{{2
 fun! s:NetSortSequence(islocal)
   let ykeep= @@
@@ -6703,7 +6602,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwUnmarkList: delete local marked file list and remove their contents from the global marked-file list {{{2
 "   User access provided by the <mF> mapping. (see :help netrw-mF)
 "   Used by many MarkFile functions.
@@ -6729,7 +6627,6 @@
   2match none
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwUnmarkAll: remove the global marked file list and all local ones {{{2
 fun! s:NetrwUnmarkAll()
   if exists("s:netrwmarkfilelist")
@@ -6739,7 +6636,6 @@
   2match none
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwUnmarkAll2: unmark all files from all buffers {{{2
 fun! s:NetrwUnmarkAll2()
   redir => netrwmarkfilelist_let
@@ -6755,7 +6651,6 @@
   endfor
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwUnMarkFile: called via mu map; unmarks *all* marked files, both global and buffer-local {{{2
 "
 " Marked files are in two types of lists:
@@ -6788,7 +6683,6 @@
   call winrestview(svpos)
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwMenu: generates the menu for gvim and netrw {{{2
 fun! s:NetrwMenu(domenu)
 
@@ -6889,7 +6783,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwObtain: obtain file under cursor or from markfile list {{{2
 "                Used by the O maps (as <SID>NetrwObtain())
 fun! s:NetrwObtain(islocal)
@@ -6906,7 +6799,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwPrevWinOpen: open file/directory in previous window.  {{{2
 "   If there's only one window, then the window will first be split.
 "   Returns:
@@ -7022,7 +6914,6 @@
   return choice
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwUpload: load fname to tgt (used by NetrwMarkFileCopy()) {{{2
 "                Always assumed to be local -> remote
 "                call s:NetrwUpload(filename, target)
@@ -7183,7 +7074,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwPreview: supports netrw's "p" map {{{2
 fun! s:NetrwPreview(path) range
   let ykeep= @@
@@ -7231,7 +7121,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwRefresh: {{{2
 fun! s:NetrwRefresh(islocal,dirname)
   " at the current time (Mar 19, 2007) all calls to NetrwRefresh() call NetrwBrowseChgDir() first.
@@ -7274,7 +7163,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwRefreshDir: refreshes a directory by name {{{2
 "                    Called by NetrwMarkFileCopy()
 "                    Interfaces to s:NetrwRefresh() and s:LocalBrowseRefresh()
@@ -7300,7 +7188,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwSetChgwin: set g:netrw_chgwin; a <cr> will use the specified
 " window number to do its editing in.
 " Supports   [count]C  where the count, if present, is used to specify
@@ -7320,7 +7207,6 @@
   echo "editing window now set to window#".g:netrw_chgwin
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwSetSort: sets up the sort based on the g:netrw_sort_sequence {{{2
 "          What this function does is to compute a priority for the patterns
 "          in the g:netrw_sort_sequence.  It applies a substitute to any
@@ -7390,7 +7276,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwSetTgt: sets the target to the specified choice index {{{2
 "    Implements [count]Tb  (bookhist<b>)
 "               [count]Th  (bookhist<h>)
@@ -7425,7 +7310,6 @@
 
 endfun
 
-" =====================================================================
 " s:NetrwSortStyle: change sorting style (name - time - size - exten) and refresh display {{{2
 fun! s:NetrwSortStyle(islocal)
   NetrwKeepj call s:NetrwSaveWordPosn()
@@ -7437,7 +7321,6 @@
   NetrwKeepj call winrestview(svpos)
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwSplit: mode {{{2
 "           =0 : net   and o
 "           =1 : net   and t
@@ -7533,7 +7416,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwTgtMenu: {{{2
 fun! s:NetrwTgtMenu()
   if !exists("s:netrw_menucnt")
@@ -7589,7 +7471,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwTreeDir: determine tree directory given current cursor position {{{2
 " (full path directory with trailing slash returned)
 fun! s:NetrwTreeDir(islocal)
@@ -7649,7 +7530,6 @@
   return treedir
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwTreeDisplay: recursive tree display {{{2
 fun! s:NetrwTreeDisplay(dir,depth)
   " ensure that there are no folds
@@ -7724,7 +7604,6 @@
   endfor
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwRefreshTreeDict: updates the contents information for a tree (w:netrw_treedict) {{{2
 fun! s:NetrwRefreshTreeDict(dir)
   if !exists("w:netrw_treedict")
@@ -7754,7 +7633,6 @@
   endfor
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwTreeListing: displays tree listing from treetop on down, using NetrwTreeDisplay() {{{2
 "                     Called by s:PerformListing()
 fun! s:NetrwTreeListing(dirname)
@@ -7809,7 +7687,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwTreePath: returns path to current file/directory in tree listing {{{2
 "                  Normally, treetop is w:netrw_treetop, but a
 "                  user of the function ( netrw#SetTreetop() )
@@ -7851,7 +7728,6 @@
   return treedir
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwWideListing: {{{2
 fun! s:NetrwWideListing()
 
@@ -7932,7 +7808,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:PerformListing: {{{2
 fun! s:PerformListing(islocal)
   sil! NetrwKeepj %d _
@@ -8157,7 +8032,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:SetupNetrwStatusLine: {{{2
 fun! s:SetupNetrwStatusLine(statline)
 
@@ -8197,11 +8071,8 @@
 
 endfun
 
-" =========================================
 "  Remote Directory Browsing Support:  {{{1
-" =========================================
 
-" ---------------------------------------------------------------------
 " s:NetrwRemoteFtpCmd: unfortunately, not all ftp servers honor options for ls {{{2
 "  This function assumes that a long listing will be received.  Size, time,
 "  and reverse sorts will be requested of the server but not otherwise
@@ -8329,7 +8200,6 @@
   let &l:ff= ffkeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwRemoteListing: {{{2
 fun! s:NetrwRemoteListing()
 
@@ -8498,7 +8368,6 @@
   return 0
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwRemoteRm: remove/delete a remote file or directory {{{2
 fun! s:NetrwRemoteRm(usrhost,path) range
   let svpos= winsaveview()
@@ -8543,7 +8412,6 @@
   NetrwKeepj call winrestview(svpos)
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwRemoteRmFile: {{{2
 fun! s:NetrwRemoteRmFile(path,rmfile,all)
 
@@ -8642,7 +8510,6 @@
   return ok
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwRemoteRename: rename a remote file or directory {{{2
 fun! s:NetrwRemoteRename(usrhost,path) range
 
@@ -8710,11 +8577,8 @@
   NetrwKeepj call winrestview(svpos)
 endfun
 
-" ==========================================
 "  Local Directory Browsing Support:    {{{1
-" ==========================================
 
-" ---------------------------------------------------------------------
 " netrw#FileUrlEdit: handles editing file://* files {{{2
 "   Should accept:   file://localhost/etc/fstab
 "                    file:///etc/fstab
@@ -8751,7 +8615,6 @@
   exe "sil doau BufReadPost ".fname2396e
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#LocalBrowseCheck: {{{2
 fun! netrw#LocalBrowseCheck(dirname)
   " This function is called by netrwPlugin.vim's s:LocalBrowseCheck(), s:NetrwRexplore(),
@@ -8800,7 +8663,6 @@
   " not a directory, ignore it
 endfun
 
-" ---------------------------------------------------------------------
 " s:LocalBrowseRefresh: this function is called after a user has {{{2
 " performed any shell command.  The idea is to cause all local-browsing
 " buffers to be refreshed after a user has executed some shell command,
@@ -8862,7 +8724,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:LocalFastBrowser: handles setting up/taking down fast browsing for the local browser {{{2
 "
 "     g:netrw_    Directory Is
@@ -9022,7 +8883,6 @@
   return resultfilelist
 endfun
 
-" ---------------------------------------------------------------------
 "  s:LocalListing: does the job of "ls" for local directories {{{2
 fun! s:LocalListing()
 
@@ -9038,7 +8898,6 @@
   exe "setl ts=".(g:netrw_maxfilenamelen+1)
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwLocalExecute: uses system() to execute command under cursor ("X" command support) {{{2
 fun! s:NetrwLocalExecute(cmd)
   let ykeep= @@
@@ -9061,7 +8920,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwLocalRename: rename a local file or directory {{{2
 fun! s:NetrwLocalRename(path) range
 
@@ -9150,7 +9008,6 @@
   let @@= ykeep
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwLocalRm: {{{2
 function! s:NetrwLocalRm(path) range
     if !exists("w:netrw_bannercnt")
@@ -9218,7 +9075,6 @@
     let @@= ykeep
 endfunction
 
-" ---------------------------------------------------------------------
 " s:NetrwLocalRmFile: remove file fname given the path {{{2
 "                     Give confirmation prompt unless all==1
 function! s:NetrwLocalRmFile(path, fname, all)
@@ -9271,16 +9127,13 @@
     return ok
 endfunction
 
-" =====================================================================
 " Support Functions: {{{1
 
-" ---------------------------------------------------------------------
 " netrw#Call: allows user-specified mappings to call internal netrw functions {{{2
 fun! netrw#Call(funcname,...)
   return call("s:".a:funcname,a:000)
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#LogLevel: returns the specified loglevel
 fun! netrw#LogLevel(level)
   if a:level == 'WARNING'
@@ -9292,7 +9145,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#Expose: allows UserMaps and pchk to look at otherwise script-local variables {{{2
 "               I expect this function to be used in
 "                 :PChkAssert netrw#Expose("netrwmarkfilelist")
@@ -9319,20 +9171,17 @@
   return retval
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#Modify: allows UserMaps to set (modify) script-local variables {{{2
 fun! netrw#Modify(varname,newvalue)
   exe "let s:".a:varname."= ".string(a:newvalue)
 endfun
 
-" ---------------------------------------------------------------------
 "  netrw#RFC2396: converts %xx into characters {{{2
 fun! netrw#RFC2396(fname)
   let fname = escape(substitute(a:fname,'%\(\x\x\)','\=printf("%c","0x".submatch(1))','ge')," \t")
   return fname
 endfun
 
-" ---------------------------------------------------------------------
 " netrw#UserMaps: supports user-specified maps {{{2
 "                 see :help function()
 "
@@ -9365,7 +9214,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBadd: adds marked files to buffer list or vice versa {{{2
 "              cb : bl2mf=0  add marked files to buffer list
 "              cB : bl2mf=1  use bufferlist to mark files
@@ -9391,7 +9239,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:DeleteBookmark: deletes a file/directory from Netrw's bookmark system {{{2
 "   Related Functions: s:MakeBookmark() s:NetrwBookHistHandler() s:NetrwBookmark()
 fun! s:DeleteBookmark(fname)
@@ -9416,7 +9263,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:FileReadable: o/s independent filereadable {{{2
 fun! s:FileReadable(fname)
   if g:netrw_cygwin
@@ -9428,7 +9274,6 @@
   return ret
 endfun
 
-" ---------------------------------------------------------------------
 "  s:GetTempfile: gets a tempname that'll work for various o/s's {{{2
 "                 Places correct suffix on end of temporary filename,
 "                 using the suffix provided with fname
@@ -9484,7 +9329,6 @@
   return tmpfile
 endfun
 
-" ---------------------------------------------------------------------
 " s:MakeSshCmd: transforms input command using USEPORT HOSTNAME into {{{2
 "               a correct command for use with a system() call
 fun! s:MakeSshCmd(sshcmd)
@@ -9503,7 +9347,6 @@
   return sshcmd
 endfun
 
-" ---------------------------------------------------------------------
 " s:MakeBookmark: enters a bookmark into Netrw's bookmark system   {{{2
 fun! s:MakeBookmark(fname)
 
@@ -9525,7 +9368,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:MergeBookmarks: merge current bookmarks with saved bookmarks {{{2
 fun! s:MergeBookmarks()
   " get bookmarks from .netrwbook file
@@ -9536,7 +9378,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwBMShow: {{{2
 fun! s:NetrwBMShow()
   redir => bmshowraw
@@ -9554,7 +9395,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwCursor: responsible for setting cursorline/cursorcolumn based upon g:netrw_cursor {{{2
 fun! s:NetrwCursor(editfile)
   if !exists("w:netrw_liststyle")
@@ -9615,7 +9455,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:RestoreCursorline: restores cursorline/cursorcolumn to original user settings {{{2
 fun! s:RestoreCursorline()
   if exists("s:netrw_usercul")
@@ -9636,7 +9475,6 @@
   endfor
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwEnew: opens a new buffer, passes netrw buffer variables through {{{2
 fun! s:NetrwEnew(...)
 
@@ -9715,7 +9553,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwInsureWinVars: insure that a netrw buffer has its w: variables in spite of a wincmd v or s {{{2
 fun! s:NetrwInsureWinVars()
   if !exists("w:netrw_liststyle")
@@ -9740,7 +9577,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwLcd: handles changing the (local) directory {{{2
 "   Returns: 0=success
 "           -1=failed
@@ -9780,14 +9616,12 @@
   return 0
 endfun
 
-" ------------------------------------------------------------------------
 " s:NetrwSaveWordPosn: used to keep cursor on same word after refresh, {{{2
 " changed sorting, etc.  Also see s:NetrwRestoreWordPosn().
 fun! s:NetrwSaveWordPosn()
   let s:netrw_saveword= '^'.fnameescape(getline('.')).'$'
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwHumanReadable: takes a number and makes it "human readable" {{{2
 "                       1000 -> 1K, 1000000 -> 1M, 1000000000 -> 1G
 fun! s:NetrwHumanReadable(sz)
@@ -9829,14 +9663,12 @@
   return sz
 endfun
 
-" ---------------------------------------------------------------------
 " s:NetrwRestoreWordPosn: used to keep cursor on same word after refresh, {{{2
 "  changed sorting, etc.  Also see s:NetrwSaveWordPosn().
 fun! s:NetrwRestoreWordPosn()
   sil! call search(s:netrw_saveword,'w')
 endfun
 
-" ---------------------------------------------------------------------
 " s:RestoreBufVars: {{{2
 fun! s:RestoreBufVars()
 
@@ -9849,7 +9681,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:RemotePathAnalysis: {{{2
 fun! s:RemotePathAnalysis(dirname)
 
@@ -9870,7 +9701,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:RemoteSystem: runs a command on a remote host using ssh {{{2
 "                 Returns status
 " Runs system() on
@@ -9895,7 +9725,6 @@
   return ret
 endfun
 
-" ---------------------------------------------------------------------
 " s:RestoreWinVars: (used by Explore() and NetrwSplit()) {{{2
 fun! s:RestoreWinVars()
   if exists("s:bannercnt")      |let w:netrw_bannercnt       = s:bannercnt      |unlet s:bannercnt      |endif
@@ -9918,7 +9747,6 @@
   if exists("s:winnr")          |let w:netrw_winnr           = s:winnr          |unlet s:winnr          |endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:Rexplore: implements returning from a buffer to a netrw directory {{{2
 "
 "             s:SetRexDir() sets up <2-leftmouse> maps (if g:netrw_retmap
@@ -9974,7 +9802,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:SaveBufVars: save selected b: variables to s: variables {{{2
 "                use s:RestoreBufVars() to restore b: variables from s: variables
 fun! s:SaveBufVars()
@@ -9988,7 +9815,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:SavePosn: saves position associated with current buffer into a dictionary {{{2
 fun! s:SavePosn(posndict)
 
@@ -10000,7 +9826,6 @@
   return a:posndict
 endfun
 
-" ---------------------------------------------------------------------
 " s:RestorePosn: restores position associated with current buffer using dictionary {{{2
 fun! s:RestorePosn(posndict)
   if exists("a:posndict")
@@ -10015,7 +9840,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:SaveWinVars: (used by Explore() and NetrwSplit()) {{{2
 fun! s:SaveWinVars()
   if exists("w:netrw_bannercnt")      |let s:bannercnt       = w:netrw_bannercnt      |endif
@@ -10038,7 +9862,6 @@
   if exists("w:netrw_winnr")          |let s:winnr           = w:netrw_winnr          |endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:SetBufWinVars: (used by NetrwBrowse() and LocalBrowseCheck()) {{{2
 "   To allow separate windows to have their own activities, such as
 "   Explore **/pattern, several variables have been made window-oriented.
@@ -10058,7 +9881,6 @@
   if exists("w:netrw_explore_list")   |let b:netrw_explore_list   = w:netrw_explore_list   |endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:SetRexDir: set directory for :Rexplore {{{2
 fun! s:SetRexDir(islocal,dirname)
   let w:netrw_rexdir         = a:dirname
@@ -10066,7 +9888,6 @@
   let s:rexposn_{bufnr("%")} = winsaveview()
 endfun
 
-" ---------------------------------------------------------------------
 " s:ShowLink: used to modify thin and tree listings to show links {{{2
 fun! s:ShowLink()
   if exists("b:netrw_curdir")
@@ -10090,7 +9911,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:ShowStyle: {{{2
 fun! s:ShowStyle()
   if !exists("w:netrw_liststyle")
@@ -10111,7 +9931,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:TreeListMove: supports [[, ]], [], and ][ in tree mode {{{2
 fun! s:TreeListMove(dir)
   let curline      = getline('.')
@@ -10140,7 +9959,6 @@
 
 endfun
 
-" ---------------------------------------------------------------------
 " s:UpdateBuffersMenu: does emenu Buffers.Refresh (but due to locale, the menu item may not be called that) {{{2
 "                      The Buffers.Refresh menu calls s:BMShow(); unfortunately, that means that that function
 "                      can't be called except via emenu.  But due to locale, that menu line may not be called
@@ -10156,7 +9974,6 @@
   endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:UseBufWinVars: (used by NetrwBrowse() and LocalBrowseCheck() {{{2
 "              Matching function to s:SetBufWinVars()
 fun! s:UseBufWinVars()
@@ -10172,7 +9989,6 @@
   if exists("b:netrw_explore_list")    && !exists("w:netrw_explore_list")   |let w:netrw_explore_list    = b:netrw_explore_list   |endif
 endfun
 
-" ---------------------------------------------------------------------
 " s:UserMaps: supports user-defined UserMaps {{{2
 "               * calls a user-supplied funcref(islocal,curdir)
 "               * interprets result
@@ -10208,7 +10024,7 @@
 
 " }}}
 " Settings Restoration: {{{1
-" ==========================
+
 let &cpo= s:keepcpo
 unlet s:keepcpo