updated for version 7.0128
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index a47f472..f98bd93 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -1,4 +1,4 @@
-*eval.txt* For Vim version 7.0aa. Last change: 2005 Aug 05
+*eval.txt* For Vim version 7.0aa. Last change: 2005 Aug 11
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -3983,7 +3983,7 @@
*spellbadword()*
spellbadword() Return the badly spelled word under or after the cursor.
- The cursor is advanced to the start of the bad word.
+ The cursor is moved to the start of the bad word.
When no bad word is found in the cursor line an empty String
is returned and the cursor doesn't move.
diff --git a/runtime/doc/insert.txt b/runtime/doc/insert.txt
index 087a0bf..43b3d4f 100644
--- a/runtime/doc/insert.txt
+++ b/runtime/doc/insert.txt
@@ -1,4 +1,4 @@
-*insert.txt* For Vim version 7.0aa. Last change: 2005 Aug 01
+*insert.txt* For Vim version 7.0aa. Last change: 2005 Aug 11
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -354,6 +354,8 @@
<MouseUp> scroll three lines up *i_<MouseUp>*
<S-MouseUp> scroll a full page up *i_<S-MouseUp>*
CTRL-O execute one command, return to Insert mode *i_CTRL-O*
+CTRL-\ CTRL-O like CTRL-O but don't move the cursor *i_CTRL-\_CTRL-O*
+CTRL-L when 'insertmode' is set: go to Normal mode *i_CTRL-L*
CTRL-G u break undo sequence, start new change *i_CTRL-G_u*
-----------------------------------------------------------------------
@@ -363,7 +365,8 @@
The CTRL-O command sometimes has a side effect: If the cursor was beyond the
end of the line, it will be put on the last character in the line. In
mappings it's often better to use <Esc> (first put an "x" in the text, <Esc>
-will then always put the cursor on it).
+will then always put the cursor on it). Or use CTRL-\ CTRL-O, but then
+beware of the cursor possibly being beyond the end of the line.
The shifted cursor keys are not available on all terminals.
@@ -567,7 +570,8 @@
9. Vim command-line |i_CTRL-X_CTRL-V|
10. User defined completion |i_CTRL-X_CTRL-U|
11. Occult completion |i_CTRL-X_CTRL-O|
-12. keywords in 'complete' |i_CTRL-N|
+12. Spelling suggestions |i_CTRL-X_s|
+13. keywords in 'complete' |i_CTRL-N|
All these (except 2) are done in CTRL-X mode. This is a sub-mode of Insert
and Replace modes. You enter CTRL-X mode by typing CTRL-X and one of the
@@ -893,6 +897,25 @@
previous one.
+Spelling suggestions *compl-spelling*
+
+The word in front of the cursor is located and correctly spelled words are
+suggested to replace it. The word doesn't actually have to be badly spelled.
+NOTE: CTRL-S suspends display in many Unix terminals. Use 's' instead. Type
+CTRL-Q to resume displaying.
+
+ *i_CTRL-X_CTRL-S* *i_CTRL-X_s*
+CTRL-X CTRL-S or
+CTRL-X s Locate the word in front of the cursor and find the
+ first spell suggestion for it.
+ CTRL-S or
+ CTRL-N Use the next suggestion. This replaces the previous
+ one. Note that you can't use 's' here.
+
+ CTRL-P Use the previous suggestion. This replaces the
+ previous one.
+
+
Completing keywords from different sources *compl-generic*
*i_CTRL-N*
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index f17cf65..70bdb87 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt* For Vim version 7.0aa. Last change: 2005 Aug 05
+*options.txt* For Vim version 7.0aa. Last change: 2005 Aug 11
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -3732,9 +3732,9 @@
- Use CTRL-O to execute one Normal mode command |i_CTRL-O|). When
this is a mapping, it is executed as if 'insertmode' was off.
Normal mode remains active until the mapping is finished.
- *i_CTRL-L*
- Use CTRL-L to execute a number of Normal mode commands, then use
- <Esc> to get back to Insert mode.
+ <Esc> to get back to Insert mode. Note that CTRL-L moves the cursor
+ left, like <Esc> does when 'insertmode' isn't set. |i_CTRL-L|
These items change when 'insertmode' is set:
- when starting to edit of a file, Vim goes to Insert mode.
diff --git a/runtime/doc/pi_netrw.txt b/runtime/doc/pi_netrw.txt
index a7e6e3b..435d51b 100644
--- a/runtime/doc/pi_netrw.txt
+++ b/runtime/doc/pi_netrw.txt
@@ -1,4 +1,4 @@
-*pi_netrw.txt* For Vim version 7.0. Last change: Aug 08, 2005
+*pi_netrw.txt* For Vim version 7.0. Last change: Aug 09, 2005
VIM REFERENCE MANUAL by Charles E. Campbell, Jr.
@@ -580,12 +580,12 @@
x................Customizing Browsing.......................|netrw-x|
COMMANDS *netrw-explore-cmds*
- :Explore[!] [dir].Explore directory of current file........|netrw-explore|
- :Sexplore[!] [dir].Split & Explore directory of current file|netrw-explore|
- :Hexplore[!] [dir].Horizontal Split & Explore...............|netrw-explore|
- :Vexplore[!] [dir].Vertical Split & Explore.................|netrw-explore|
- :Pexplore[!] [dir].Vertical Split & Explore.................|netrw-explore|
- :Nexplore[!] [dir].Vertical Split & Explore.................|netrw-explore|
+ :Explore[!] [dir] Explore directory of current file........|netrw-explore|
+ :Sexplore[!] [dir] Split & Explore directory ...............|netrw-explore|
+ :Hexplore[!] [dir] Horizontal Split & Explore...............|netrw-explore|
+ :Vexplore[!] [dir] Vertical Split & Explore.................|netrw-explore|
+ :Pexplore[!] [dir] Vertical Split & Explore.................|netrw-explore|
+ :Nexplore[!] [dir] Vertical Split & Explore.................|netrw-explore|
QUICK REFERENCE COMMANDS TABLE *netrw-browse-cmds*
>
@@ -745,28 +745,32 @@
*netrw-hexplore* *netrw-sexplore*
DIRECTORY EXPLORING COMMANDS *netrw-nexplore* *netrw-vexplore*
- :Explore[!] [dir]... Explore directory of current file
- :Sexplore[!] [dir]... Split & Explore directory of current file
- :Hexplore[!] [dir]... Horizontal Split & Explore
- :Vexplore[!] [dir]... Vertical Split & Explore
- :Nexplore............. used with **/patterns; go to next matching file
- :Pexplore............. used with **/patterns; go to previous matching file
+ :Explore[!] [dir]... Explore directory of current file *:Explore*
+ :Sexplore[!] [dir]... Split&Explore directory of current file *:Sexplore*
+ :Hexplore[!] [dir]... Horizontal Split & Explore *:Hexplore*
+ :Vexplore[!] [dir]... Vertical Split & Explore *:Vexplore*
-The Explore command will open the local-directory browser on the current
-file's directory (or on directory [dir] if specified). The window will be
-split only if the file has been modified, otherwise the browsing window will
-take over that window. Normally the splitting is taken horizontally; the
-optional ! will use vertical splitting.
+ Used with :Explore **/pattern :
+ :Nexplore............. go to next matching file *:Nexplore*
+ :Pexplore............. go to previous matching file *:Pexplore*
-Sexplore will always split the window before invoking the local-directory
-browser. As with Explore, the splitting is normally done horizontally, but
-with the optional ! the splitting will be done vertically.
+:Explore will open the local-directory browser on the current file's
+ directory (or on directory [dir] if specified). The window will be
+ split only if the file has been modified, otherwise the browsing
+ window will take over that window. Normally the splitting is taken
+ horizontally.
+:Explore! is like :Explore, but will use vertical splitting.
+:Sexplore will always split the window before invoking the local-directory
+ browser. As with Explore, the splitting is normally done
+ horizontally.
+:Sexplore! [dir] is like :Sexplore, but the splitting will be done vertically.
+:Hexplore [dir] does an :Explore with |:belowright| horizontal splitting.
+:Hexplore! [dir] does an :Explore with |:aboveleft| horizontal splitting.
+:Vexplore [dir] does an :Explore with |:leftabove| vertical splitting.
+:Vexplore! [dir] does an :Explore with |:rightbelow| vertical splitting.
-Hexplore does an Explore with |belowright| horizontal splitting; the
-optional ! does the Explore with |aboveleft| horizontal splitting.
-
-Vexplore does an Explore with |leftabove| vertical splitting; the
-optional "!" does an Explore with |topleft| vertical splitting.
+By default, these commands use the current file's directory. However, one
+may explicitly provide a directory (path) to use.
(Following needs v7.0 or later) *netrw-starstar*
When Explore, Sexplore, Hexplore, or Vexplore are used like
@@ -941,7 +945,7 @@
SELECTING SORTING STYLE *netrw-s* *netrw-sort*
One may select the sorting style by name, time, or (file) size. The
-"s" map allows one to circulate among the three choices; the directory
+"s" map allows one to circulate amongst the three choices; the directory
listing will automatically be refreshed to reflect the selected style.
@@ -952,7 +956,7 @@
prioritizes the name-listing by suffix, although any pattern will do.
Patterns are delimited by commas. The default sorting sequence is:
>
- /$,*,\.bak$,\.o$,\.h$,\.info$,\.swp$,\.obj$
+ [\/]$,*,\.bak$,\.o$,\.h$,\.info$,\.swp$,\.obj$
<
The lone * is where all filenames not covered by one of the other
patterns will end up. One may change the sorting sequence by modifying
@@ -1072,7 +1076,7 @@
(This section is likely to grow as I get feedback)
(also see |netrw-debug|)
-
+ *netrw-p1*
P1. I use windows 95, and my ftp dumps four blank lines at the
end of every read.
@@ -1081,8 +1085,7 @@
let g:netrw_win95ftp= 1
-
-
+ *netrw-p2*
P2. I use windows, and my network browsing with ftp doesn't sort by
time or size
@@ -1100,6 +1103,7 @@
let g:netrw_cygwin= 1
+ *netrw-p3*
P3. I tried rcp://user@host/ (or protocol other than ftp) and netrw
used ssh! That wasn't what I asked for...
@@ -1108,6 +1112,7 @@
When it comes time to do download a file (not just a directory
listing), netrw will use the given protocol to do so.
+ *netrw-p4*
P4. I would like long listings to be the default.
let g:netrw_longlist=1
@@ -1115,6 +1120,7 @@
Check out |netrw-browse-var| for more customizations that
you can set.
+ *netrw-p5*
P5. My times come up oddly in local browsing
Does your system's strftime() accept the "%c" to yield dates
@@ -1123,6 +1129,7 @@
your <.vimrc>:
let g:netrw_timefmt= "%X" (where X is the option)
+ *netrw-p6*
P6. I want my current directory to track my browsing.
How do I do that?
@@ -1133,9 +1140,11 @@
9. Debugging *netrw-debug*
The <netrw.vim> script is typically available as:
-
+>
/usr/local/share/vim/vim6x/plugin/netrw.vim
-
+< -or- >
+ /usr/local/share/vim/vim7x/plugin/netrw.vim
+<
which is loaded automatically at startup (assuming :set nocp).
1. Get the <Decho.vim> script, available as:
@@ -1179,6 +1188,12 @@
==============================================================================
10. History *netrw-history*
+ v60: * when using the i map to switch between long and short listings,
+ netrw will now keep cursor on same line
+ * "Match # of #" now uses status line
+ * :Explore **/*.c will now work from a non-netrw-browser window
+ * :Explore **/patterns can now be run in separate browser windows
+ * active banner (hit <cr> will cause various things to happen)
v59: * bugfix -- another keepalt work-around installed (for vim6.3)
* "Match # of #" for Explore **/pattern matches
v58: * Explore and relatives can now handle **/somefilepattern (v7)
diff --git a/runtime/doc/spell.txt b/runtime/doc/spell.txt
index 573a942..d76c66b 100644
--- a/runtime/doc/spell.txt
+++ b/runtime/doc/spell.txt
@@ -1,4 +1,4 @@
-*spell.txt* For Vim version 7.0aa. Last change: 2005 Jul 31
+*spell.txt* For Vim version 7.0aa. Last change: 2005 Aug 11
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -145,6 +145,10 @@
:spellr[epall] Repeat the replacement done by |z?| for all matches
with the replaced word in the current window.
+In Insert mode, when the cursor is after a badly spelled word, you can use
+CTRL-X s to find suggestions. This works like Insert mode completion. Use
+CTRL-N to use the next suggestion, CTRL-P to go back. |i_CTRL-X_s|
+
The 'spellsuggest' option influences how the list of suggestions is generated
and sorted. See |'spellsuggest'|.
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index dfe93ca..3643f7a 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt* For Vim version 7.0aa. Last change: 2005 Jul 29
+*syntax.txt* For Vim version 7.0aa. Last change: 2005 Aug 11
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -399,7 +399,7 @@
:unlet html_number_lines
Closed folds are put in the HTML as they are displayed. If you don't want
-this, use the "zR" command before invoking 2html, or use: >
+this, use the |zR| command before invoking 2html, or use: >
:let html_ignore_folding = 1
By default, HTML optimized for old browsers is generated. If you prefer using
@@ -426,16 +426,13 @@
variable: >
:unlet html_use_encoding
<
-Closed folds are kept as they are displayed. If you don't want closed folds
-in the HTML use the |zR| command before converting.
-
For diff mode a sequence of more than 3 filler lines is displayed as three
lines with the middle line mentioning the total number of inserted lines. If
you prefer to see all the inserted lines use: >
:let html_whole_filler = 1
And to go back to displaying up to three lines again: >
:unlet html_whole_filler
-
+<
*convert-to-XML* *convert-to-XHTML*
An alternative is to have the script generate XHTML (XML compliant HTML). To
do this set the "use_xhtml" variable: >
@@ -2355,18 +2352,30 @@
TEX *tex.vim* *tex-syntax*
+*tex-folding*
+Want Syntax Folding? ~
+
+As of version 28 of <syntax/tex.vim>, syntax-based folding of parts, chapters,
+sections, subsections, etc are supported. Put >
+ let g:tex_fold_enabled=1
+in your <.vimrc>, and :set fdm=syntax. I suggest doing the latter via a
+modeline at the end of your LaTeX file: >
+ % vim: fdm=syntax
+<
+*tex-runon*
Run-on Comments/Math? ~
-The tex highlighting supports TeX, LaTeX, and some AmsTeX. The
-highlighting supports three primary zones: normal, texZone, and texMathZone.
-Although a considerable effort has been made to have these zones terminate
-properly, zones delineated by $..$ and $$..$$ cannot be synchronized as
-there's no difference between start and end patterns. Consequently, a
+The <syntax/tex.vim> highlighting supports TeX, LaTeX, and some AmsTeX. The
+highlighting supports three primary zones/regions: normal, texZone, and
+texMathZone. Although considerable effort has been made to have these zones
+terminate properly, zones delineated by $..$ and $$..$$ cannot be synchronized
+as there's no difference between start and end patterns. Consequently, a
special "TeX comment" has been provided >
%stopzone
which will forcibly terminate the highlighting of either a texZone or a
texMathZone.
+*tex-slow*
Slow Syntax Highlighting? ~
If you have a slow computer, you may wish to reduce the values for >
@@ -2376,6 +2385,7 @@
increase them. This primarily affects synchronizing (i.e. just what group,
if any, is the text at the top of the screen supposed to be in?).
+*tex-error*
Excessive Error Highlighting? ~
The <tex.vim> supports lexical error checking of various sorts. Thus,
@@ -2383,28 +2393,24 @@
errors where none actually are. If this proves to be a problem for you,
you may put in your <.vimrc> the following statement: >
let tex_no_error=1
-and all error checking by <tex.vim> will be suppressed.
+and all error checking by <syntax/tex.vim> will be suppressed.
+*tex-math*
Need a new Math Group? ~
If you want to include a new math group in your LaTeX, the following
code shows you an example as to how you might do so: >
+ call TexNewMathZone(sfx,mathzone,starform)
+You'll want to provide the new math group with a unique suffix
+(currently, A-L and V-Z are taken by <syntax/tex.vim> itself).
+As an example, consider how eqnarray is set up by <syntax/tex.vim>: >
+ call TexNewMathZone("D","eqnarray",1)
+You'll need to change "mathzone" to the name of your new math group,
+and then to the call to it in .vim/after/syntax/tex.vim.
+The "starform" variable, if true, implies that your new math group
+has a starred form (ie. eqnarray*).
- syn cluster texMathZones add=texMathZoneLOCAL
- syn region texMathZoneLOCAL start="\\begin\s*{\s*LOCALMATH\s*}"
- \ end="\\end\s*{\s*LOCALMATH\s*}" keepend
- \ contains=@texMathZoneGroup
- if !exists("tex_no_math")
- syn sync match texSyncMathZoneLOCAL grouphere texMathZoneLOCAL
- \ "\\begin\s*{\s*LOCALMATH\*\s*}"
- syn sync match texSyncMathZoneLOCAL groupthere NONE
- \ "\\end\s*{\s*LOCALMATH\*\s*}"
- endif
- hi link texMathZoneLOCAL texMath
-<
-You'll need to change LOCALMATH to the name of your new math group,
-and then to put it into .vim/after/syntax/tex.vim.
-
+*tex-style*
Starting a New Style? ~
One may use "\makeatletter" in *.tex files, thereby making the use of "@" in
diff --git a/runtime/doc/tags b/runtime/doc/tags
index e5eb5d3..0cb5c8d 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -4453,6 +4453,7 @@
compl-generic insert.txt /*compl-generic*
compl-keyword insert.txt /*compl-keyword*
compl-occult insert.txt /*compl-occult*
+compl-spelling insert.txt /*compl-spelling*
compl-tag insert.txt /*compl-tag*
compl-vim insert.txt /*compl-vim*
compl-whole-line insert.txt /*compl-whole-line*
@@ -5317,7 +5318,7 @@
i_CTRL-I insert.txt /*i_CTRL-I*
i_CTRL-J insert.txt /*i_CTRL-J*
i_CTRL-K insert.txt /*i_CTRL-K*
-i_CTRL-L options.txt /*i_CTRL-L*
+i_CTRL-L insert.txt /*i_CTRL-L*
i_CTRL-M insert.txt /*i_CTRL-M*
i_CTRL-N insert.txt /*i_CTRL-N*
i_CTRL-O insert.txt /*i_CTRL-O*
@@ -5342,17 +5343,20 @@
i_CTRL-X_CTRL-N insert.txt /*i_CTRL-X_CTRL-N*
i_CTRL-X_CTRL-O insert.txt /*i_CTRL-X_CTRL-O*
i_CTRL-X_CTRL-P insert.txt /*i_CTRL-X_CTRL-P*
+i_CTRL-X_CTRL-S insert.txt /*i_CTRL-X_CTRL-S*
i_CTRL-X_CTRL-T insert.txt /*i_CTRL-X_CTRL-T*
i_CTRL-X_CTRL-U insert.txt /*i_CTRL-X_CTRL-U*
i_CTRL-X_CTRL-V insert.txt /*i_CTRL-X_CTRL-V*
i_CTRL-X_CTRL-Y insert.txt /*i_CTRL-X_CTRL-Y*
i_CTRL-X_CTRL-] insert.txt /*i_CTRL-X_CTRL-]*
i_CTRL-X_index index.txt /*i_CTRL-X_index*
+i_CTRL-X_s insert.txt /*i_CTRL-X_s*
i_CTRL-Y insert.txt /*i_CTRL-Y*
i_CTRL-Z options.txt /*i_CTRL-Z*
i_CTRL-[ insert.txt /*i_CTRL-[*
i_CTRL-\_CTRL-G intro.txt /*i_CTRL-\\_CTRL-G*
i_CTRL-\_CTRL-N intro.txt /*i_CTRL-\\_CTRL-N*
+i_CTRL-\_CTRL-O insert.txt /*i_CTRL-\\_CTRL-O*
i_CTRL-] insert.txt /*i_CTRL-]*
i_CTRL-^ insert.txt /*i_CTRL-^*
i_CTRL-_ insert.txt /*i_CTRL-_*
@@ -5764,6 +5768,7 @@
netrw-h pi_netrw.txt /*netrw-h*
netrw-handler pi_netrw.txt /*netrw-handler*
netrw-help pi_netrw.txt /*netrw-help*
+netrw-hexplore pi_netrw.txt /*netrw-hexplore*
netrw-history pi_netrw.txt /*netrw-history*
netrw-horiz pi_netrw.txt /*netrw-horiz*
netrw-i pi_netrw.txt /*netrw-i*
@@ -5773,6 +5778,7 @@
netrw-maps pi_netrw.txt /*netrw-maps*
netrw-move pi_netrw.txt /*netrw-move*
netrw-netrc pi_netrw.txt /*netrw-netrc*
+netrw-nexplore pi_netrw.txt /*netrw-nexplore*
netrw-nread pi_netrw.txt /*netrw-nread*
netrw-nwrite pi_netrw.txt /*netrw-nwrite*
netrw-o pi_netrw.txt /*netrw-o*
@@ -5780,6 +5786,7 @@
netrw-p pi_netrw.txt /*netrw-p*
netrw-passwd pi_netrw.txt /*netrw-passwd*
netrw-path pi_netrw.txt /*netrw-path*
+netrw-pexplore pi_netrw.txt /*netrw-pexplore*
netrw-preview pi_netrw.txt /*netrw-preview*
netrw-problems pi_netrw.txt /*netrw-problems*
netrw-protocol pi_netrw.txt /*netrw-protocol*
@@ -5790,8 +5797,10 @@
netrw-rename pi_netrw.txt /*netrw-rename*
netrw-reverse pi_netrw.txt /*netrw-reverse*
netrw-s pi_netrw.txt /*netrw-s*
+netrw-sexplore pi_netrw.txt /*netrw-sexplore*
netrw-sort pi_netrw.txt /*netrw-sort*
netrw-sortsequence pi_netrw.txt /*netrw-sortsequence*
+netrw-starstar pi_netrw.txt /*netrw-starstar*
netrw-transparent pi_netrw.txt /*netrw-transparent*
netrw-u pi_netrw.txt /*netrw-u*
netrw-uidpass pi_netrw.txt /*netrw-uidpass*
@@ -5800,6 +5809,7 @@
netrw-v pi_netrw.txt /*netrw-v*
netrw-var pi_netrw.txt /*netrw-var*
netrw-variables pi_netrw.txt /*netrw-variables*
+netrw-vexplore pi_netrw.txt /*netrw-vexplore*
netrw-write pi_netrw.txt /*netrw-write*
netrw-x pi_netrw.txt /*netrw-x*
netrw-xfer pi_netrw.txt /*netrw-xfer*
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 68c220a..6776077 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt* For Vim version 7.0aa. Last change: 2005 Aug 10
+*todo.txt* For Vim version 7.0aa. Last change: 2005 Aug 11
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -33,9 +33,6 @@
Spell checking: default value for 'spellcapcheck' in spell file?
For Hebrew and Yiddish it should be empty.
-When 'insertmode' is set, CTRL-L no longer moves the cursor left. What
-compatibility problems does this cause?
-
Using "@:" has two problems (Tim Chase, 2005 Aug 9)
Mac unicode patch (Da Woon Jung):
diff --git a/runtime/doc/version7.txt b/runtime/doc/version7.txt
index 10402aa..d4fbb33 100644
--- a/runtime/doc/version7.txt
+++ b/runtime/doc/version7.txt
@@ -1,4 +1,4 @@
-*version7.txt* For Vim version 7.0aa. Last change: 2005 Aug 09
+*version7.txt* For Vim version 7.0aa. Last change: 2005 Aug 11
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -331,6 +331,11 @@
|at| and |it| text objects select a block of text between HTML or XML tags.
+Insert mode commands: ~
+
+CTRL-\ CTRL-O Execute a Normal mode command. Like CTRL-O but
+ without moving the cursor.
+
Options: ~
'completefunc' The name of a function used for user-specified Insert
@@ -1274,7 +1279,4 @@
Win32: Could not use "**/" in 'path', it had to be "**\".
-When 'insertmode' is set CTRL-L would move the cursor. That wasn't supposed
-to happen, CTRL-O doesn't do it either.
-
vim:tw=78:ts=8:ft=help:norl: