diff --git a/runtime/doc/builtin.txt b/runtime/doc/builtin.txt
index c228335..d1d18c5 100644
--- a/runtime/doc/builtin.txt
+++ b/runtime/doc/builtin.txt
@@ -1,4 +1,4 @@
-*builtin.txt*	For Vim version 9.0.  Last change: 2022 Oct 10
+*builtin.txt*	For Vim version 9.0.  Last change: 2022 Oct 14
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -5404,7 +5404,8 @@
 				the change; one if unknown or the whole line
 				was affected; this is a byte index, first
 				character has a value of one.
-		When lines are inserted the values are:
+		When lines are inserted (not when a line is split, e.g. by
+		typing CR in Insert mode) the values are:
 		    lnum	line above which the new line is added
 		    end		equal to "lnum"
 		    added	number of lines inserted
diff --git a/runtime/doc/indent.txt b/runtime/doc/indent.txt
index 38c173b..8cae93a 100644
--- a/runtime/doc/indent.txt
+++ b/runtime/doc/indent.txt
@@ -1,4 +1,4 @@
-*indent.txt*    For Vim version 9.0.  Last change: 2022 May 21
+*indent.txt*    For Vim version 9.0.  Last change: 2022 Oct 10
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -982,9 +982,12 @@
 
 PYTHON							*ft-python-indent*
 
-The amount of indent can be set for the following situations.  The examples
-given are the defaults.  Note that the dictionary values are set to an
-expression, so that you can change the value of 'shiftwidth' later.
+The amount of indent can be set with the `g:python_indent` |Dictionary|, which
+needs to be created before adding the items: >
+	let g:python_indent = {}
+The examples given are the defaults.  Note that the dictionary values are set
+to an expression, so that you can change the value of 'shiftwidth' later
+without having to update these values.
 
 Indent after an open paren: >
 	let g:python_indent.open_paren = 'shiftwidth() * 2'
diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt
index 4c0d653..9de498b 100644
--- a/runtime/doc/index.txt
+++ b/runtime/doc/index.txt
@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 9.0.  Last change: 2022 Jun 11
+*index.txt*     For Vim version 9.0.  Last change: 2022 Oct 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
diff --git a/runtime/doc/intro.txt b/runtime/doc/intro.txt
index 7813177..5cbaf67 100644
--- a/runtime/doc/intro.txt
+++ b/runtime/doc/intro.txt
@@ -1,4 +1,4 @@
-*intro.txt*     For Vim version 9.0.  Last change: 2022 Sep 12
+*intro.txt*     For Vim version 9.0.  Last change: 2022 Oct 12
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -122,10 +122,10 @@
 Bug reports:				*bugs* *bug-reports* *bugreport.vim*
 
 There are three ways to report bugs:
-1. Open an issue on GitHub: https://github.com/vim/vim/issues
-   The text will be forwarded to the vim-dev maillist.
-2. For issues with runtime files, look in the header for an email address or
+1. For issues with runtime files, look in the header for an email address or
    any other way to report it to the maintainer.
+2. Open an issue on GitHub: https://github.com/vim/vim/issues
+   The text will be forwarded to the vim-dev maillist.
 3. Send bug reports to: Vim Developers <vim-dev@vim.org>
    This is a maillist, you need to become a member first and many people will
    see the message.  If you don't want that, e.g. because it is a security
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 9ecb64e..5beb6a2 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 9.0.  Last change: 2022 Oct 03
+*options.txt*	For Vim version 9.0.  Last change: 2022 Oct 15
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -7534,7 +7534,7 @@
 	When on, splitting a window will put the new window below the current
 	one. |:split|
 
-			*'splitkeep'* *'spk'
+			*'splitkeep'* *'spk'*
 'splitkeep' 'spk'	string	(default "cursor")
 			global
 	The value of this option determines the scroll behavior when opening,
@@ -7548,7 +7548,7 @@
 	For the "screen" and "topline" values, the cursor position will be
 	changed when necessary. In this case, the jumplist will be populated
 	with the previous cursor position. For "screen", the text cannot always
-	be kept on the same screen line	when 'wrap' is enabled.
+	be kept on the same screen line when 'wrap' is enabled.
 
 			*'splitright'* *'spr'* *'nosplitright'* *'nospr'*
 'splitright' 'spr'	boolean	(default off)
diff --git a/runtime/doc/os_haiku.txt b/runtime/doc/os_haiku.txt
index be08b4a..1a80862 100644
--- a/runtime/doc/os_haiku.txt
+++ b/runtime/doc/os_haiku.txt
@@ -47,7 +47,7 @@
 
 Haiku uses "ncurses6" as its terminal library, therefore you need to have
 "ncurses6_devel" package installed from HaikuDepot in order to configure
-the Haiku build.  Just append "--with-tlib=ncurses6" to ./configure command
+the Haiku build.  Just append "--with-tlib=ncurses" to ./configure command.
 
 Now you should use "make" to compile Vim, then "make install" to install it.
 For seamless integration into Haiku, the GUI-less vim binary should be
@@ -56,12 +56,14 @@
   ./configure --prefix=`finddir B_SYSTEM_NONPACKAGED_DIRECTORY` \
     --datarootdir=`finddir B_SYSTEM_NONPACKAGED_DATA_DIRECTORY` \
     --mandir=`finddir B_SYSTEM_NONPACKAGED_DIRECTORY`/documentation/man \
+    --with-tlib=ncurses \
   make clean
   make install
 
   ./configure --prefix=`finddir B_SYSTEM_NONPACKAGED_DIRECTORY`  \
     --datarootdir=`finddir B_SYSTEM_NONPACKAGED_DATA_DIRECTORY` \
     --mandir=`finddir B_SYSTEM_NONPACKAGED_DIRECTORY`/documentation/man \
+    --with-tlib=ncurses \
     --disable-gui
   make clean
   make install
diff --git a/runtime/doc/popup.txt b/runtime/doc/popup.txt
index 59896ec..f611fd9 100644
--- a/runtime/doc/popup.txt
+++ b/runtime/doc/popup.txt
@@ -1,4 +1,4 @@
-*popup.txt*  For Vim version 9.0.  Last change: 2022 Jun 16
+*popup.txt*  For Vim version 9.0.  Last change: 2022 Oct 07
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -366,7 +366,6 @@
 		Get the |window-ID| for the popup preview window.
 		Return zero if there is none.
 
-
 popup_getoptions({id})					*popup_getoptions()*
 		Return the {options} for popup {id} in a Dict.
 		A zero value means the option was not set.  For "zindex" the
diff --git a/runtime/doc/quickref.txt b/runtime/doc/quickref.txt
index fab9830..370e1f2 100644
--- a/runtime/doc/quickref.txt
+++ b/runtime/doc/quickref.txt
@@ -1,4 +1,4 @@
-*quickref.txt*  For Vim version 9.0.  Last change: 2022 Oct 02
+*quickref.txt*  For Vim version 9.0.  Last change: 2022 Oct 15
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -785,6 +785,7 @@
 'lines'			    number of lines in the display
 'linespace'	  'lsp'     number of pixel lines to use between characters
 'lisp'			    automatic indenting for Lisp
+'lispoptions'	  'lop'     changes how Lisp indenting is done
 'lispwords'	  'lw'	    words that change how lisp indenting works
 'list'			    show <Tab> and <EOL>
 'listchars'	  'lcs'     characters for displaying in list mode
diff --git a/runtime/doc/repeat.txt b/runtime/doc/repeat.txt
index 059c639..0f79afd 100644
--- a/runtime/doc/repeat.txt
+++ b/runtime/doc/repeat.txt
@@ -628,6 +628,11 @@
 directories are added to 'runtimepath'.  Then all the plugins are loaded.
 See |packload-two-steps| for how these two steps can be useful.
 
+To allow for calling into package functionality while parsing your .vimrc,
+|:colorscheme| and |autoload| will both automatically search under 'packpath'
+as well in addition to 'runtimepath'.  See the documentation for each for
+details.
+
 In the example Vim will find "pack/foo/start/foobar/plugin/foo.vim" and adds
 "~/.vim/pack/foo/start/foobar" to 'runtimepath'.
 
diff --git a/runtime/doc/rileft.txt b/runtime/doc/rileft.txt
index 31a382b..623ac38 100644
--- a/runtime/doc/rileft.txt
+++ b/runtime/doc/rileft.txt
@@ -1,4 +1,4 @@
-*rileft.txt*    For Vim version 9.0.  Last change: 2022 Apr 03
+*rileft.txt*    For Vim version 9.0.  Last change: 2022 Oct 12
 
 
 		  VIM REFERENCE MANUAL    by Avner Lottem
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index 1775af7..89ac893 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -1,4 +1,4 @@
-*syntax.txt*	For Vim version 9.0.  Last change: 2022 Oct 03
+*syntax.txt*	For Vim version 9.0.  Last change: 2022 Oct 14
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -3021,16 +3021,25 @@
 SED						*sed.vim* *ft-sed-syntax*
 
 To make tabs stand out from regular blanks (accomplished by using Todo
-highlighting on the tabs), define "highlight_sedtabs" by putting >
+highlighting on the tabs), define "g:sed_highlight_tabs" by putting >
 
-	:let highlight_sedtabs = 1
-
+	:let g:sed_highlight_tabs = 1
+<
 in the vimrc file.  (This special highlighting only applies for tabs
 inside search patterns, replacement texts, addresses or text included
 by an Append/Change/Insert command.)  If you enable this option, it is
 also a good idea to set the tab width to one character; by doing that,
 you can easily count the number of tabs in a string.
 
+GNU sed allows comments after text on the same line.  BSD sed only allows
+comments where "#" is the first character of the line.  To enforce BSD-style
+comments, i.e. mark end-of-line comments as errors, use: >
+
+	:let g:sed_dialect = "bsd"
+<
+Note that there are other differences between GNU sed and BSD sed which are
+not (yet) affected by this setting.
+
 Bugs:
 
   The transform command (y) is treated exactly like the substitute
diff --git a/runtime/doc/tags b/runtime/doc/tags
index 639938f..7c25a9a 100644
--- a/runtime/doc/tags
+++ b/runtime/doc/tags
@@ -451,6 +451,7 @@
 'lines'	options.txt	/*'lines'*
 'linespace'	options.txt	/*'linespace'*
 'lisp'	options.txt	/*'lisp'*
+'lispoptions'	options.txt	/*'lispoptions'*
 'lispwords'	options.txt	/*'lispwords'*
 'list'	options.txt	/*'list'*
 'listchars'	options.txt	/*'listchars'*
@@ -458,6 +459,7 @@
 'lmap'	options.txt	/*'lmap'*
 'lnr'	options.txt	/*'lnr'*
 'loadplugins'	options.txt	/*'loadplugins'*
+'lop'	options.txt	/*'lop'*
 'lpl'	options.txt	/*'lpl'*
 'lrm'	options.txt	/*'lrm'*
 'ls'	options.txt	/*'ls'*
@@ -954,6 +956,7 @@
 'spelloptions'	options.txt	/*'spelloptions'*
 'spellsuggest'	options.txt	/*'spellsuggest'*
 'spf'	options.txt	/*'spf'*
+'spk'	options.txt	/*'spk'*
 'spl'	options.txt	/*'spl'*
 'splitbelow'	options.txt	/*'splitbelow'*
 'splitkeep'	options.txt	/*'splitkeep'*
@@ -5547,6 +5550,7 @@
 TextChanged	autocmd.txt	/*TextChanged*
 TextChangedI	autocmd.txt	/*TextChangedI*
 TextChangedP	autocmd.txt	/*TextChangedP*
+TextChangedT	autocmd.txt	/*TextChangedT*
 TextYankPost	autocmd.txt	/*TextYankPost*
 Transact-SQL	ft_sql.txt	/*Transact-SQL*
 U	undo.txt	/*U*
@@ -5574,7 +5578,6 @@
 VimSuspend	autocmd.txt	/*VimSuspend*
 Vimball-copyright	pi_vimball.txt	/*Vimball-copyright*
 Virtual-Replace-mode	insert.txt	/*Virtual-Replace-mode*
-VisVim	if_ole.txt	/*VisVim*
 Visual	visual.txt	/*Visual*
 Visual-mode	visual.txt	/*Visual-mode*
 W	motion.txt	/*W*
@@ -9034,6 +9037,7 @@
 popup_dialog-example	popup.txt	/*popup_dialog-example*
 popup_filter_menu()	popup.txt	/*popup_filter_menu()*
 popup_filter_yesno()	popup.txt	/*popup_filter_yesno()*
+popup_findecho()	popup.txt	/*popup_findecho()*
 popup_findinfo()	popup.txt	/*popup_findinfo()*
 popup_findpreview()	popup.txt	/*popup_findpreview()*
 popup_getoptions()	popup.txt	/*popup_getoptions()*
diff --git a/runtime/doc/terminal.txt b/runtime/doc/terminal.txt
index 4d02558..3acc513 100644
--- a/runtime/doc/terminal.txt
+++ b/runtime/doc/terminal.txt
@@ -1,4 +1,4 @@
-*terminal.txt*	For Vim version 9.0.  Last change: 2022 Jun 09
+*terminal.txt*	For Vim version 9.0.  Last change: 2022 Oct 10
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
diff --git a/runtime/doc/textprop.txt b/runtime/doc/textprop.txt
index 4aa00ac..2ecf4af 100644
--- a/runtime/doc/textprop.txt
+++ b/runtime/doc/textprop.txt
@@ -1,4 +1,4 @@
-*textprop.txt*  For Vim version 9.0.  Last change: 2022 Sep 21
+*textprop.txt*  For Vim version 9.0.  Last change: 2022 Oct 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -172,6 +172,9 @@
 				   wrap      wrap the text to the next line
 				   truncate  truncate the text to make it fit
 		   		When omitted "truncate" is used.
+				Note that this applies to the individual text
+				property, the 'wrap' option sets the overall
+				behavior
 		All fields except "type" are optional.
 
 		It is an error when both "length" and "end_lnum" or "end_col"
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 0e12520..d6562d5 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 9.0.  Last change: 2022 Oct 03
+*todo.txt*      For Vim version 9.0.  Last change: 2022 Oct 16
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -39,22 +39,12 @@
 -------------------- Known bugs and current work -----------------------
 
 'smoothscroll':
+- CTRL-E and gj in long line with 'scrolloff' 5 not working well yet.
 - computing 'scrolloff' position row use w_skipcol
 
-Add a string to the 'display' option ("smoothscroll" ?) to make CTRL-E and
-CTRL-Y scroll one screen line, also if this means the first line doesn't start
-with the first character (like what happens with a last line that doesn't
-fit).  Display "<<<" at the start of the first visible line (like "@@@" is
-displayed in the last line). (Arseny Nasokin,  #5154)
-Neovim PR: https://github.com/neovim/neovim/pull/11014
+Check textprop right/above/below with 'number' set and "n" in 'cpo'.
 
-Use :defer command:
-    - Use "D" flag of writefile() and mkdir() in tests.
-	(testdir/test_p*.vim done)
-
-Fix for powershell: #11257
-
-Change boolean 'splitscroll' into string 'splitkeep'. #11258
+Don't do anything for ":!". #11372
 
 
 Further Vim9 improvements, possibly after launch:
@@ -70,7 +60,8 @@
 Popup windows:
 - Add a function to redraw a specific popup window.  Esp. to be used when
   editing the command line, when screen updating doesn't happen. (Shougo)
-  #10210  Probably need to update all popup windows (they may overlap)
+  #10210  Example that shows the need on the issue.
+  Probably need to update all popup windows (they may overlap)
   If the display is scrolled need to redraw everything later.
 - Add a flag to make a popup window focusable?
     CTRL-W P cycle over any preview window or focusable popup, end up back in
@@ -174,7 +165,10 @@
   conversions.
 
 Autoconf: must use autoconf 2.69, later version generates lots of warnings
-- try using autoconf 2.71 and fix all "obsolete" warnings
+- try using autoconf 2.71 and fix all "obsolete" warnings  #11322
+
+Problem with Visual highlight when 'linebreak' and 'showbreak' are set.
+#11272
 
 Can deref_func_name() and deref_function_name() be merged?
 
@@ -196,10 +190,17 @@
 entry separately. #6609
 Multiplexers (screen, tmux) can request it to the underlying terminal, and
 pass it on with modifications.
+How to get all the text quickly (also over ssh)?  Can we use a side channel?
 
 Using "A" and "o" in manually created fold (in empty buffer) does not behave
 consistenly (James McCoy, #10698)
 
+In a timer callback, when using ":echo" and then input() the message is
+overwritten.  Could use ":echowin" and call redraw_cmd() in get_user_input().
+#11299
+
+Syntax include problem: #11277.  Related to Patch 8.2.2761
+
 To avoid flicker: add an option that when a screen clear is requested, instead
 of clearing it draws everything and uses "clear to end of line" for every line.
 Resetting 't_ut' already causes this?
@@ -233,11 +234,10 @@
 Version of getchar() that does not move the cursor - #10603 Use a separate
 argument for the new flag.
 
-Add "lastline" entry to 'fillchars' to specify a character instead of '@'.
-#10963
-
 test_arglist func Test_all_not_allowed_from_cmdwin() hangs on MS-Windows.
 
+Can we add highlighting to ":echowindow"?
+
 Information for a specific terminal (e.g. gnome, tmux, konsole, alacritty) is
 spread out.  Make a section with copy/paste examples of script and pointers to
 more information.
@@ -450,8 +450,6 @@
 
 Enable 'termbidi' if $VTE_VERSION >= 5703 ?
 
-Sound: support on Mac?  Or does libcanberra work there?
-
 Python 3.8 doesn't work. (Antonios Hadjigeorgalis, #5509)
 
 "--cleanFOO" does not result in an error. (#5537)
@@ -601,6 +599,11 @@
 tab page. (Ingo Karkat, #4324)
 :call settabwinvar(1, 1, '&cmdheight', 2) also doesn't work well.
 
+When opening a file, allow for specifying the initial column position:
+    vim +12:5 file.txt   line 12 column 5
+    :edit +12:5 file.txt
+Should probably use the column as the character index.
+
 This modeline throws unexpected errors: (#4165)
     vim: syn=nosyntax
 
@@ -3074,9 +3077,6 @@
     line is too short.  Add a word in 'scrollopt' to allow moving the cursor
     to longer line that is visible.  A similar thing is done for the GUI when
     using the horizontal scrollbar.
-7   VisVim can only open one file.  Hard to solve: each opened file is passed
-    with a separate invocation, would need to use timestamps to know the
-    invocations belong together.
 8   When giving a ":bwipeout" command a file-changed dialog may popup for this
     buffer, which is pointless.  (Mike Williams)
 8   On MS-Windows ":make" doesn't show output while it is working.  Use the
diff --git a/runtime/doc/userfunc.txt b/runtime/doc/userfunc.txt
index 806d8f7..46bd0c8 100644
--- a/runtime/doc/userfunc.txt
+++ b/runtime/doc/userfunc.txt
@@ -482,6 +482,10 @@
 	   echo "Done!"
 	endfunction
 
+If the file doesn't exist, Vim will also search in 'packpath' (under "start")
+to allow calling packages' functions from your .vimrc when the packages have
+not been added to 'runtimepath' yet (see |packages|).
+
 The file name and the name used before the # in the function must match
 exactly, and the defined function must have the name exactly as it will be
 called.  In Vim9 script the "g:" prefix must be used: >
diff --git a/runtime/doc/usr_41.txt b/runtime/doc/usr_41.txt
index 97e1d5c..1d5c7e5 100644
--- a/runtime/doc/usr_41.txt
+++ b/runtime/doc/usr_41.txt
@@ -1,4 +1,4 @@
-*usr_41.txt*	For Vim version 9.0.  Last change: 2022 Jun 23
+*usr_41.txt*	For Vim version 9.0.  Last change: 2022 Oct 07
 
 		     VIM USER MANUAL - by Bram Moolenaar
 
diff --git a/runtime/doc/usr_52.txt b/runtime/doc/usr_52.txt
index 46f0108..787dd91 100644
--- a/runtime/doc/usr_52.txt
+++ b/runtime/doc/usr_52.txt
@@ -159,6 +159,7 @@
 
 This will search for the script "monthlib.vim" in the autoload directories of
 'runtimepath'.  With Unix one of the directories often is "~/.vim/autoload".
+It will also search under 'packpath', under "start".
 
 The main advantage of this is that this script can be easily shared with other
 scripts.  You do need to make sure that the script name is unique, since Vim
diff --git a/runtime/doc/various.txt b/runtime/doc/various.txt
index 6a6c3b6..6f24515 100644
--- a/runtime/doc/various.txt
+++ b/runtime/doc/various.txt
@@ -1,4 +1,4 @@
-*various.txt*   For Vim version 9.0.  Last change: 2022 Sep 19
+*various.txt*   For Vim version 9.0.  Last change: 2022 Oct 13
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar