patch 8.1.0864: cannot have a local value for 'scrolloff' and 'sidescrolloff'
Problem: Cannot have a local value for 'scrolloff' and 'sidescrolloff'.
(Gary Holloway)
Solution: Make 'scrolloff' and 'sidescrolloff' global-local. (mostly by
Aron Widforss, closes #3539)
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 2667490..04c38b2 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -6590,14 +6590,18 @@
*'scrolloff'* *'so'*
'scrolloff' 'so' number (default 0, set to 5 in |defaults.vim|)
- global
+ global or local to window |global-local|
{not in Vi}
Minimal number of screen lines to keep above and below the cursor.
This will make some context visible around where you are working. If
you set it to a very large value (999) the cursor line will always be
in the middle of the window (except at the start or end of the file or
when long lines wrap).
- For scrolling horizontally see 'sidescrolloff'.
+ After using the local value, go back the global value with one of
+ these two: >
+ setlocal scrolloff<
+ setlocal scrolloff=-1
+< For scrolling horizontally see 'sidescrolloff'.
NOTE: This option is set to 0 when 'compatible' is set.
*'scrollopt'* *'sbo'*
@@ -7152,7 +7156,7 @@
*'sidescrolloff'* *'siso'*
'sidescrolloff' 'siso' number (default 0)
- global
+ global or local to window |global-local|
{not in Vi}
The minimal number of screen columns to keep to the left and to the
right of the cursor if 'nowrap' is set. Setting this option to a
@@ -7162,7 +7166,11 @@
to a large value (like 999) has the effect of keeping the cursor
horizontally centered in the window, as long as one does not come too
close to the beginning of the line.
- NOTE: This option is set to 0 when 'compatible' is set.
+ After using the local value, go back the global value with one of
+ these two: >
+ setlocal sidescrolloff<
+ setlocal sidescrolloff=-1
+< NOTE: This option is set to 0 when 'compatible' is set.
Example: Try this together with 'sidescroll' and 'listchars' as
in the following example to never allow the cursor to move
diff --git a/src/edit.c b/src/edit.c
index de1666c..eac4803 100644
--- a/src/edit.c
+++ b/src/edit.c
@@ -728,7 +728,7 @@
(int)curwin->w_wcol < mincol - curbuf->b_p_ts
#endif
&& curwin->w_wrow == W_WINROW(curwin)
- + curwin->w_height - 1 - p_so
+ + curwin->w_height - 1 - get_scrolloff_value()
&& (curwin->w_cursor.lnum != curwin->w_topline
#ifdef FEAT_DIFF
|| curwin->w_topfill > 0
diff --git a/src/ex_cmds.c b/src/ex_cmds.c
index 6d03d88..a3974c1 100644
--- a/src/ex_cmds.c
+++ b/src/ex_cmds.c
@@ -3784,6 +3784,7 @@
#endif
int readfile_flags = 0;
int did_inc_redrawing_disabled = FALSE;
+ long *so_ptr = curwin->w_p_so >= 0 ? &curwin->w_p_so : &p_so;
if (eap != NULL)
command = eap->do_ecmd_cmd;
@@ -4389,12 +4390,12 @@
did_inc_redrawing_disabled = FALSE;
if (!skip_redraw)
{
- n = p_so;
+ n = *so_ptr;
if (topline == 0 && command == NULL)
- p_so = 999; /* force cursor halfway the window */
+ *so_ptr = 9999; // force cursor halfway the window
update_topline();
curwin->w_scbind_pos = curwin->w_topline;
- p_so = n;
+ *so_ptr = n;
redraw_curbuf_later(NOT_VALID); /* redraw this buffer later */
}
diff --git a/src/ex_docmd.c b/src/ex_docmd.c
index 1646a22..b90ea7b 100644
--- a/src/ex_docmd.c
+++ b/src/ex_docmd.c
@@ -8923,7 +8923,7 @@
{
if (wp->w_p_scb && wp->w_buffer)
{
- y = wp->w_buffer->b_ml.ml_line_count - p_so;
+ y = wp->w_buffer->b_ml.ml_line_count - get_scrolloff_value();
if (topline > y)
topline = y;
}
diff --git a/src/gui.c b/src/gui.c
index 3996895..d993bc6 100644
--- a/src/gui.c
+++ b/src/gui.c
@@ -4405,7 +4405,7 @@
#endif
)
{
- if (p_so != 0)
+ if (get_scrolloff_value() != 0)
{
cursor_correct(); /* fix window for 'so' */
update_topline(); /* avoid up/down jump */
diff --git a/src/misc2.c b/src/misc2.c
index 657e164..278cc33 100644
--- a/src/misc2.c
+++ b/src/misc2.c
@@ -643,6 +643,7 @@
long lastcol;
colnr_T s, e;
int retval = FALSE;
+ long siso = get_sidescrolloff_value();
changed_cline_bef_curs();
lastcol = curwin->w_leftcol + curwin->w_width - curwin_col_off() - 1;
@@ -652,15 +653,15 @@
* If the cursor is right or left of the screen, move it to last or first
* character.
*/
- if (curwin->w_virtcol > (colnr_T)(lastcol - p_siso))
+ if (curwin->w_virtcol > (colnr_T)(lastcol - siso))
{
retval = TRUE;
- coladvance((colnr_T)(lastcol - p_siso));
+ coladvance((colnr_T)(lastcol - siso));
}
- else if (curwin->w_virtcol < curwin->w_leftcol + p_siso)
+ else if (curwin->w_virtcol < curwin->w_leftcol + siso)
{
retval = TRUE;
- (void)coladvance((colnr_T)(curwin->w_leftcol + p_siso));
+ (void)coladvance((colnr_T)(curwin->w_leftcol + siso));
}
/*
diff --git a/src/move.c b/src/move.c
index 14b7a6e..da29b36 100644
--- a/src/move.c
+++ b/src/move.c
@@ -192,8 +192,9 @@
#endif
int check_topline = FALSE;
int check_botline = FALSE;
+ long *so_ptr = curwin->w_p_so >= 0 ? &curwin->w_p_so : &p_so;
#ifdef FEAT_MOUSE
- int save_so = p_so;
+ int save_so = *so_ptr;
#endif
/* If there is no valid screen and when the window height is zero just use
@@ -214,7 +215,7 @@
#ifdef FEAT_MOUSE
/* When dragging with the mouse, don't scroll that quickly */
if (mouse_dragging > 0)
- p_so = mouse_dragging - 1;
+ *so_ptr = mouse_dragging - 1;
#endif
old_topline = curwin->w_topline;
@@ -268,11 +269,11 @@
if (hasAnyFolding(curwin))
{
/* Count the number of logical lines between the cursor and
- * topline + p_so (approximation of how much will be
+ * topline + scrolloff (approximation of how much will be
* scrolled). */
n = 0;
for (lnum = curwin->w_cursor.lnum;
- lnum < curwin->w_topline + p_so; ++lnum)
+ lnum < curwin->w_topline + *so_ptr; ++lnum)
{
++n;
/* stop at end of file or when we know we are far off */
@@ -283,7 +284,7 @@
}
else
#endif
- n = curwin->w_topline + p_so - curwin->w_cursor.lnum;
+ n = curwin->w_topline + *so_ptr - curwin->w_cursor.lnum;
/* If we weren't very close to begin with, we scroll to put the
* cursor in the middle of the window. Otherwise put the cursor
@@ -325,7 +326,7 @@
if (curwin->w_cursor.lnum < curwin->w_botline)
{
if (((long)curwin->w_cursor.lnum
- >= (long)curwin->w_botline - p_so
+ >= (long)curwin->w_botline - *so_ptr
#ifdef FEAT_FOLDING
|| hasAnyFolding(curwin)
#endif
@@ -354,11 +355,11 @@
)
{
n += loff.height;
- if (n >= p_so)
+ if (n >= *so_ptr)
break;
botline_forw(&loff);
}
- if (n >= p_so)
+ if (n >= *so_ptr)
/* sufficient context, no need to scroll */
check_botline = FALSE;
}
@@ -372,11 +373,11 @@
if (hasAnyFolding(curwin))
{
/* Count the number of logical lines between the cursor and
- * botline - p_so (approximation of how much will be
+ * botline - scrolloff (approximation of how much will be
* scrolled). */
line_count = 0;
for (lnum = curwin->w_cursor.lnum;
- lnum >= curwin->w_botline - p_so; --lnum)
+ lnum >= curwin->w_botline - *so_ptr; --lnum)
{
++line_count;
/* stop at end of file or when we know we are far off */
@@ -388,7 +389,7 @@
else
#endif
line_count = curwin->w_cursor.lnum - curwin->w_botline
- + 1 + p_so;
+ + 1 + *so_ptr;
if (line_count <= curwin->w_height + 1)
scroll_cursor_bot(scrolljump_value(), FALSE);
else
@@ -421,7 +422,7 @@
}
#ifdef FEAT_MOUSE
- p_so = save_so;
+ *so_ptr = save_so;
#endif
}
@@ -447,8 +448,9 @@
{
lineoff_T loff;
int n;
+ long so = get_scrolloff_value();
- if (curwin->w_cursor.lnum < curwin->w_topline + p_so
+ if (curwin->w_cursor.lnum < curwin->w_topline + so
#ifdef FEAT_FOLDING
|| hasAnyFolding(curwin)
#endif
@@ -462,7 +464,7 @@
n = 0;
#endif
/* Count the visible screen lines above the cursor line. */
- while (n < p_so)
+ while (n < so)
{
topline_back(&loff);
/* Stop when included a line above the window. */
@@ -474,7 +476,7 @@
break;
n += loff.height;
}
- if (n < p_so)
+ if (n < so)
return TRUE;
}
return FALSE;
@@ -946,6 +948,8 @@
colnr_T startcol;
colnr_T endcol;
colnr_T prev_skipcol;
+ long so = get_scrolloff_value();
+ long siso = get_sidescrolloff_value();
/*
* First make sure that w_topline is valid (after moving the cursor).
@@ -1028,9 +1032,9 @@
* If we get closer to the edge than 'sidescrolloff', scroll a little
* extra
*/
- off_left = (int)startcol - (int)curwin->w_leftcol - p_siso;
+ off_left = (int)startcol - (int)curwin->w_leftcol - siso;
off_right = (int)endcol - (int)(curwin->w_leftcol + curwin->w_width
- - p_siso) + 1;
+ - siso) + 1;
if (off_left < 0 || off_right > 0)
{
if (off_left < 0)
@@ -1079,9 +1083,10 @@
prev_skipcol = curwin->w_skipcol;
p_lines = 0;
+
if ((curwin->w_wrow >= curwin->w_height
|| ((prev_skipcol > 0
- || curwin->w_wrow + p_so >= curwin->w_height)
+ || curwin->w_wrow + so >= curwin->w_height)
&& (p_lines =
#ifdef FEAT_DIFF
plines_win_nofill
@@ -1098,25 +1103,25 @@
/* Cursor past end of screen. Happens with a single line that does
* not fit on screen. Find a skipcol to show the text around the
* cursor. Avoid scrolling all the time. compute value of "extra":
- * 1: Less than "p_so" lines above
- * 2: Less than "p_so" lines below
+ * 1: Less than 'scrolloff' lines above
+ * 2: Less than 'scrolloff' lines below
* 3: both of them */
extra = 0;
- if (curwin->w_skipcol + p_so * width > curwin->w_virtcol)
+ if (curwin->w_skipcol + so * width > curwin->w_virtcol)
extra = 1;
/* Compute last display line of the buffer line that we want at the
* bottom of the window. */
if (p_lines == 0)
p_lines = plines_win(curwin, curwin->w_cursor.lnum, FALSE);
--p_lines;
- if (p_lines > curwin->w_wrow + p_so)
- n = curwin->w_wrow + p_so;
+ if (p_lines > curwin->w_wrow + so)
+ n = curwin->w_wrow + so;
else
n = p_lines;
if ((colnr_T)n >= curwin->w_height + curwin->w_skipcol / width)
extra += 2;
- if (extra == 3 || p_lines < p_so * 2)
+ if (extra == 3 || p_lines < so * 2)
{
/* not enough room for 'scrolloff', put cursor in the middle */
n = curwin->w_virtcol / width;
@@ -1132,7 +1137,7 @@
else if (extra == 1)
{
/* less then 'scrolloff' lines above, decrease skipcol */
- extra = (curwin->w_skipcol + p_so * width - curwin->w_virtcol
+ extra = (curwin->w_skipcol + so * width - curwin->w_virtcol
+ width - 1) / width;
if (extra > 0)
{
@@ -1464,7 +1469,7 @@
end_row += curwin->w_cline_height - 1 -
curwin->w_virtcol / curwin->w_width;
}
- if (end_row < curwin->w_height - p_so)
+ if (end_row < curwin->w_height - get_scrolloff_value())
{
#ifdef FEAT_DIFF
if (can_fill)
@@ -1522,7 +1527,7 @@
validate_virtcol();
start_row -= curwin->w_virtcol / curwin->w_width;
}
- if (start_row >= p_so)
+ if (start_row >= get_scrolloff_value())
{
#ifdef FEAT_DIFF
if (curwin->w_topfill > 0)
@@ -1666,7 +1671,7 @@
linenr_T old_topfill = curwin->w_topfill;
#endif
linenr_T new_topline;
- int off = p_so;
+ int off = get_scrolloff_value();
#ifdef FEAT_MOUSE
if (mouse_dragging > 0)
@@ -1842,6 +1847,7 @@
linenr_T old_valid = curwin->w_valid;
int old_empty_rows = curwin->w_empty_rows;
linenr_T cln; /* Cursor Line Number */
+ long so = get_scrolloff_value();
cln = curwin->w_cursor.lnum;
if (set_topbot)
@@ -1898,7 +1904,7 @@
* Stop counting lines to scroll when
* - hitting start of the file
* - scrolled nothing or at least 'sj' lines
- * - at least 'so' lines below the cursor
+ * - at least 'scrolloff' lines below the cursor
* - lines between botline and cursor have been counted
*/
#ifdef FEAT_FOLDING
@@ -1924,7 +1930,7 @@
#ifdef FEAT_MOUSE
mouse_dragging > 0 ? mouse_dragging - 1 :
#endif
- p_so))
+ so))
|| boff.lnum + 1 > curbuf->b_ml.ml_line_count)
&& loff.lnum <= curwin->w_botline
#ifdef FEAT_DIFF
@@ -1970,7 +1976,7 @@
#ifdef FEAT_MOUSE
mouse_dragging > 0 ? mouse_dragging - 1 :
#endif
- p_so) || scrolled < min_scroll)
+ so) || scrolled < min_scroll)
{
extra += boff.height;
if (boff.lnum >= curwin->w_botline
@@ -2124,7 +2130,7 @@
/*
* Correct the cursor position so that it is in a part of the screen at least
- * 'so' lines from the top and bottom, if possible.
+ * 'scrolloff' lines from the top and bottom, if possible.
* If not possible, put it at the same position as scroll_cursor_halfway().
* When called topline must be valid!
*/
@@ -2138,13 +2144,14 @@
int above_wanted, below_wanted;
linenr_T cln; /* Cursor Line Number */
int max_off;
+ long so = get_scrolloff_value();
/*
* How many lines we would like to have above/below the cursor depends on
* whether the first/last line of the file is on screen.
*/
- above_wanted = p_so;
- below_wanted = p_so;
+ above_wanted = so;
+ below_wanted = so;
#ifdef FEAT_MOUSE
if (mouse_dragging > 0)
{
@@ -2262,6 +2269,7 @@
int retval = OK;
lineoff_T loff;
linenr_T old_topline = curwin->w_topline;
+ long so = get_scrolloff_value();
if (curbuf->b_ml.ml_line_count == 1) /* nothing to do */
{
@@ -2279,7 +2287,7 @@
* last line.
*/
if (dir == FORWARD
- ? ((curwin->w_topline >= curbuf->b_ml.ml_line_count - p_so)
+ ? ((curwin->w_topline >= curbuf->b_ml.ml_line_count - so)
&& curwin->w_botline > curbuf->b_ml.ml_line_count)
: (curwin->w_topline == 1
#ifdef FEAT_DIFF
diff --git a/src/normal.c b/src/normal.c
index b512b55..41af966 100644
--- a/src/normal.c
+++ b/src/normal.c
@@ -2814,7 +2814,7 @@
/* Set global flag that we are extending the Visual area with mouse
* dragging; temporarily minimize 'scrolloff'. */
- if (VIsual_active && is_drag && p_so)
+ if (VIsual_active && is_drag && get_scrolloff_value())
{
/* In the very first line, allow scrolling one line */
if (mouse_row == 0)
@@ -4635,7 +4635,7 @@
scrollup(count, TRUE);
else
scrolldown(count, TRUE);
- if (p_so)
+ if (get_scrolloff_value())
{
/* Adjust the cursor position for 'scrolloff'. Mark w_topline as
* valid, otherwise the screen jumps back at the end of the file. */
@@ -4692,6 +4692,7 @@
#ifdef FEAT_SPELL
int undo = FALSE;
#endif
+ long siso = get_sidescrolloff_value();
if (VIM_ISDIGIT(nchar))
{
@@ -4874,8 +4875,8 @@
else
#endif
getvcol(curwin, &curwin->w_cursor, &col, NULL, NULL);
- if ((long)col > p_siso)
- col -= p_siso;
+ if ((long)col > siso)
+ col -= siso;
else
col = 0;
if (curwin->w_leftcol != col)
@@ -4896,10 +4897,10 @@
#endif
getvcol(curwin, &curwin->w_cursor, NULL, NULL, &col);
n = curwin->w_width - curwin_col_off();
- if ((long)col + p_siso < n)
+ if ((long)col + siso < n)
col = 0;
else
- col = col + p_siso - n + 1;
+ col = col + siso - n + 1;
if (curwin->w_leftcol != col)
{
curwin->w_leftcol = col;
diff --git a/src/option.c b/src/option.c
index abbbaa5..6d2bab1 100644
--- a/src/option.c
+++ b/src/option.c
@@ -227,6 +227,8 @@
#endif
#define PV_SCBIND OPT_WIN(WV_SCBIND)
#define PV_SCROLL OPT_WIN(WV_SCROLL)
+#define PV_SISO OPT_BOTH(OPT_WIN(WV_SISO))
+#define PV_SO OPT_BOTH(OPT_WIN(WV_SO))
#ifdef FEAT_SPELL
# define PV_SPELL OPT_WIN(WV_SPELL)
#endif
@@ -2333,7 +2335,7 @@
(char_u *)&p_sj, PV_NONE,
{(char_u *)1L, (char_u *)0L} SCTX_INIT},
{"scrolloff", "so", P_NUM|P_VI_DEF|P_VIM|P_RALL,
- (char_u *)&p_so, PV_NONE,
+ (char_u *)&p_so, PV_SO,
{(char_u *)0L, (char_u *)0L} SCTX_INIT},
{"scrollopt", "sbo", P_STRING|P_VI_DEF|P_ONECOMMA|P_NODUP,
(char_u *)&p_sbo, PV_NONE,
@@ -2490,7 +2492,7 @@
(char_u *)&p_ss, PV_NONE,
{(char_u *)0L, (char_u *)0L} SCTX_INIT},
{"sidescrolloff", "siso", P_NUM|P_VI_DEF|P_VIM|P_RBUF,
- (char_u *)&p_siso, PV_NONE,
+ (char_u *)&p_siso, PV_SISO,
{(char_u *)0L, (char_u *)0L} SCTX_INIT},
{"signcolumn", "scl", P_STRING|P_ALLOCED|P_VI_DEF|P_RWIN,
#ifdef FEAT_SIGNS
@@ -3736,11 +3738,19 @@
win_comp_scroll(curwin);
else
{
- *(long *)varp = (long)(long_i)options[opt_idx].def_val[dvi];
+ long def_val = (long)(long_i)options[opt_idx].def_val[dvi];
+
+ if ((long *)varp == &curwin->w_p_so
+ || (long *)varp == &curwin->w_p_siso)
+ // 'scrolloff' and 'sidescrolloff' local values have a
+ // different default value than the global default.
+ *(long *)varp = -1;
+ else
+ *(long *)varp = def_val;
/* May also set global value for local option. */
if (both)
*(long *)get_varp_scope(&(options[opt_idx]), OPT_GLOBAL) =
- *(long *)varp;
+ def_val;
}
}
else /* P_BOOL */
@@ -9382,7 +9392,7 @@
}
if (p_so < 0 && full_screen)
{
- errmsg = e_scroll;
+ errmsg = e_positive;
p_so = 0;
}
if (p_siso < 0 && full_screen)
@@ -10657,6 +10667,12 @@
clear_string_option(&buf->b_p_tc);
buf->b_tc_flags = 0;
break;
+ case PV_SISO:
+ curwin->w_p_siso = -1;
+ break;
+ case PV_SO:
+ curwin->w_p_so = -1;
+ break;
#ifdef FEAT_FIND_ID
case PV_DEF:
clear_string_option(&buf->b_p_def);
@@ -10745,6 +10761,8 @@
case PV_AR: return (char_u *)&(curbuf->b_p_ar);
case PV_TAGS: return (char_u *)&(curbuf->b_p_tags);
case PV_TC: return (char_u *)&(curbuf->b_p_tc);
+ case PV_SISO: return (char_u *)&(curwin->w_p_siso);
+ case PV_SO: return (char_u *)&(curwin->w_p_so);
#ifdef FEAT_FIND_ID
case PV_DEF: return (char_u *)&(curbuf->b_p_def);
case PV_INC: return (char_u *)&(curbuf->b_p_inc);
@@ -10803,6 +10821,10 @@
? (char_u *)&(curbuf->b_p_tc) : p->var;
case PV_BKC: return *curbuf->b_p_bkc != NUL
? (char_u *)&(curbuf->b_p_bkc) : p->var;
+ case PV_SISO: return curwin->w_p_siso >= 0
+ ? (char_u *)&(curwin->w_p_siso) : p->var;
+ case PV_SO: return curwin->w_p_so >= 0
+ ? (char_u *)&(curwin->w_p_so) : p->var;
#ifdef FEAT_FIND_ID
case PV_DEF: return *curbuf->b_p_def != NUL
? (char_u *)&(curbuf->b_p_def) : p->var;
@@ -13099,6 +13121,26 @@
}
/*
+ * Return the effective 'scrolloff' value for the current window, using the
+ * global value when appropriate.
+ */
+ long
+get_scrolloff_value(void)
+{
+ return curwin->w_p_so < 0 ? p_so : curwin->w_p_so;
+}
+
+/*
+ * Return the effective 'sidescrolloff' value for the current window, using the
+ * global value when appropriate.
+ */
+ long
+get_sidescrolloff_value(void)
+{
+ return curwin->w_p_siso < 0 ? p_siso : curwin->w_p_siso;
+}
+
+/*
* Check matchpairs option for "*initc".
* If there is a match set "*initc" to the matching character and "*findc" to
* the opposite character. Set "*backwards" to the direction.
diff --git a/src/option.h b/src/option.h
index c282da3..90c0508 100644
--- a/src/option.h
+++ b/src/option.h
@@ -1152,6 +1152,8 @@
#endif
, WV_SCBIND
, WV_SCROLL
+ , WV_SISO
+ , WV_SO
#ifdef FEAT_SPELL
, WV_SPELL
#endif
diff --git a/src/proto/option.pro b/src/proto/option.pro
index 3da51c6..1027edf 100644
--- a/src/proto/option.pro
+++ b/src/proto/option.pro
@@ -76,6 +76,8 @@
long get_sw_value_pos(buf_T *buf, pos_T *pos);
long get_sw_value_col(buf_T *buf, colnr_T col);
long get_sts_value(void);
+long get_scrolloff_value(void);
+long get_sidescrolloff_value(void);
void find_mps_values(int *initc, int *findc, int *backwards, int switchit);
unsigned int get_bkc_value(buf_T *buf);
int signcolumn_on(win_T *wp);
diff --git a/src/search.c b/src/search.c
index a4b4c41..4b3f853 100644
--- a/src/search.c
+++ b/src/search.c
@@ -2601,6 +2601,8 @@
#endif
colnr_T save_dollar_vcol;
char_u *p;
+ long *so = curwin->w_p_so >= 0 ? &curwin->w_p_so : &p_so;
+ long *siso = curwin->w_p_siso >= 0 ? &curwin->w_p_siso : &p_siso;
/*
* Only show match for chars in the 'matchpairs' option.
@@ -2635,8 +2637,8 @@
{
mpos = *lpos; /* save the pos, update_screen() may change it */
save_cursor = curwin->w_cursor;
- save_so = p_so;
- save_siso = p_siso;
+ save_so = *so;
+ save_siso = *siso;
/* Handle "$" in 'cpo': If the ')' is typed on top of the "$",
* stop displaying the "$". */
if (dollar_vcol >= 0 && dollar_vcol == curwin->w_virtcol)
@@ -2651,8 +2653,8 @@
ui_cursor_shape(); /* may show different cursor shape */
#endif
curwin->w_cursor = mpos; /* move to matching char */
- p_so = 0; /* don't use 'scrolloff' here */
- p_siso = 0; /* don't use 'sidescrolloff' here */
+ *so = 0; /* don't use 'scrolloff' here */
+ *siso = 0; /* don't use 'sidescrolloff' here */
showruler(FALSE);
setcursor();
cursor_on(); /* make sure that the cursor is shown */
@@ -2672,8 +2674,8 @@
else if (!char_avail())
ui_delay(p_mat * 100L, FALSE);
curwin->w_cursor = save_cursor; /* restore cursor position */
- p_so = save_so;
- p_siso = save_siso;
+ *so = save_so;
+ *siso = save_siso;
#ifdef CURSOR_SHAPE
State = save_state;
ui_cursor_shape(); /* may show different cursor shape */
diff --git a/src/structs.h b/src/structs.h
index ddc56bc..e6cc829 100644
--- a/src/structs.h
+++ b/src/structs.h
@@ -2932,6 +2932,8 @@
int w_p_brishift; /* additional shift for breakindent */
int w_p_brisbr; /* sbr in 'briopt' */
#endif
+ long w_p_siso; /* 'sidescrolloff' local value */
+ long w_p_so; /* 'scrolloff' local value */
/* transform a pointer to a "onebuf" option into a "allbuf" option */
#define GLOBAL_WO(p) ((char *)p + sizeof(winopt_T))
diff --git a/src/testdir/test_options.vim b/src/testdir/test_options.vim
index 740863e..83b315d 100644
--- a/src/testdir/test_options.vim
+++ b/src/testdir/test_options.vim
@@ -483,3 +483,38 @@
bwipe
bwipe
endfunc
+
+func Test_local_scrolloff()
+ set so=5
+ set siso=7
+ split
+ call assert_equal(5, &so)
+ setlocal so=3
+ call assert_equal(3, &so)
+ wincmd w
+ call assert_equal(5, &so)
+ wincmd w
+ setlocal so<
+ call assert_equal(5, &so)
+ setlocal so=0
+ call assert_equal(0, &so)
+ setlocal so=-1
+ call assert_equal(5, &so)
+
+ call assert_equal(7, &siso)
+ setlocal siso=3
+ call assert_equal(3, &siso)
+ wincmd w
+ call assert_equal(7, &siso)
+ wincmd w
+ setlocal siso<
+ call assert_equal(7, &siso)
+ setlocal siso=0
+ call assert_equal(0, &siso)
+ setlocal siso=-1
+ call assert_equal(7, &siso)
+
+ close
+ set so&
+ set siso&
+endfunc
diff --git a/src/version.c b/src/version.c
index 05b18ed..7a02fbd 100644
--- a/src/version.c
+++ b/src/version.c
@@ -784,6 +784,8 @@
static int included_patches[] =
{ /* Add new patch number below this line */
/**/
+ 864,
+/**/
863,
/**/
862,
diff --git a/src/window.c b/src/window.c
index d89f3a8..f78fcca 100644
--- a/src/window.c
+++ b/src/window.c
@@ -4594,6 +4594,10 @@
new_wp->w_cursor.lnum = 1;
new_wp->w_scbind_pos = 1;
+ // use global option value for global-local options
+ new_wp->w_p_so = -1;
+ new_wp->w_p_siso = -1;
+
/* We won't calculate w_fraction until resizing the window */
new_wp->w_fraction = 0;
new_wp->w_prev_fraction_row = -1;
@@ -5871,7 +5875,7 @@
if (wp == curwin)
{
- if (p_so)
+ if (get_scrolloff_value())
update_topline();
curs_columns(FALSE); /* validate w_wrow */
}