diff --git a/runtime/doc/debug.txt b/runtime/doc/debug.txt
index a38b9f6..12b0bb1 100644
--- a/runtime/doc/debug.txt
+++ b/runtime/doc/debug.txt
@@ -1,4 +1,4 @@
-*debug.txt*     For Vim version 7.3.  Last change: 2010 Sep 14
+*debug.txt*     For Vim version 7.3.  Last change: 2010 Dec 22
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -21,8 +21,8 @@
 compilation, here is what you can do to find out exactly where Vim crashes.
 This also applies when using the MingW tools.
 
-1. Compile Vim with the "-g" option (there is a line in the Makefile for this,
-   which you can uncomment).  Also make sure "strip" is disabled (do not
+1. Compile Vim with the "-g" option (there is a line in the src/Makefile for
+   this, which you can uncomment).  Also make sure "strip" is disabled (do not
    install it, or use the line "STRIP = /bin/true").
 
 2. Execute these commands (replace "11" with the test that fails): >
diff --git a/runtime/doc/eval.txt b/runtime/doc/eval.txt
index 43ff985..d1c0b02 100644
--- a/runtime/doc/eval.txt
+++ b/runtime/doc/eval.txt
@@ -6133,17 +6133,17 @@
 cmdline_hist		Compiled with |cmdline-history| support.
 cmdline_info		Compiled with 'showcmd' and 'ruler' support.
 comments		Compiled with |'comments'| support.
+compatible		Compiled to be very Vi compatible.
 cryptv			Compiled with encryption support |encryption|.
 cscope			Compiled with |cscope| support.
-compatible		Compiled to be very Vi compatible.
 debug			Compiled with "DEBUG" defined.
 dialog_con		Compiled with console dialog support.
 dialog_gui		Compiled with GUI dialog support.
 diff			Compiled with |vimdiff| and 'diff' support.
 digraphs		Compiled with support for digraphs.
 dnd			Compiled with support for the "~ register |quote_~|.
-dos32			32 bits DOS (DJGPP) version of Vim.
 dos16			16 bits DOS version of Vim.
+dos32			32 bits DOS (DJGPP) version of Vim.
 ebcdic			Compiled on a machine with ebcdic character set.
 emacs_tags		Compiled with support for Emacs tags.
 eval			Compiled with expression evaluation support.  Always
@@ -6166,15 +6166,15 @@
 gettext			Compiled with message translation |multi-lang|
 gui			Compiled with GUI enabled.
 gui_athena		Compiled with Athena GUI.
+gui_gnome		Compiled with Gnome support (gui_gtk is also defined).
 gui_gtk			Compiled with GTK+ GUI (any version).
 gui_gtk2		Compiled with GTK+ 2 GUI (gui_gtk is also defined).
-gui_gnome		Compiled with Gnome support (gui_gtk is also defined).
 gui_mac			Compiled with Macintosh GUI.
 gui_motif		Compiled with Motif GUI.
 gui_photon		Compiled with Photon GUI.
+gui_running		Vim is running in the GUI, or it will start soon.
 gui_win32		Compiled with MS Windows Win32 GUI.
 gui_win32s		idem, and Win32s system being used (Windows 3.1)
-gui_running		Vim is running in the GUI, or it will start soon.
 hangul_input		Compiled with Hangul input support. |hangul|
 iconv			Can use iconv() for conversion.
 insert_expand		Compiled with support for CTRL-X expansion commands in
@@ -6196,20 +6196,20 @@
 mksession		Compiled with support for |:mksession|.
 modify_fname		Compiled with file name modifiers. |filename-modifiers|
 mouse			Compiled with support mouse.
-mouseshape		Compiled with support for 'mouseshape'.
 mouse_dec		Compiled with support for Dec terminal mouse.
 mouse_gpm		Compiled with support for gpm (Linux console mouse)
 mouse_netterm		Compiled with support for netterm mouse.
 mouse_pterm		Compiled with support for qnx pterm mouse.
 mouse_sysmouse		Compiled with support for sysmouse (*BSD console mouse)
 mouse_xterm		Compiled with support for xterm mouse.
+mouseshape		Compiled with support for 'mouseshape'.
 multi_byte		Compiled with support for 'encoding'
 multi_byte_encoding	'encoding' is set to a multi-byte encoding.
 multi_byte_ime		Compiled with support for IME input method.
 multi_lang		Compiled with support for multiple languages.
 mzscheme		Compiled with MzScheme interface |mzscheme|.
-netbeans_intg		Compiled with support for |netbeans|.
 netbeans_enabled	Compiled with support for |netbeans| and connected.
+netbeans_intg		Compiled with support for |netbeans|.
 ole			Compiled with OLE automation support for Win32.
 os2			OS/2 version of Vim.
 osfiletype		Compiled with support for osfiletypes |+osfiletype|
@@ -6230,11 +6230,11 @@
 signs			Compiled with |:sign| support.
 smartindent		Compiled with 'smartindent' support.
 sniff			Compiled with SNiFF interface support.
+spell			Compiled with spell checking support |spell|.
 startuptime		Compiled with |--startuptime| support.
 statusline		Compiled with support for 'statusline', 'rulerformat'
 			and special formats of 'titlestring' and 'iconstring'.
 sun_workshop		Compiled with support for Sun |workshop|.
-spell			Compiled with spell checking support |spell|.
 syntax			Compiled with syntax highlighting support |syntax|.
 syntax_items		There are active syntax highlighting items for the
 			current buffer.
@@ -6255,9 +6255,9 @@
 toolbar			Compiled with support for |gui-toolbar|.
 unix			Unix version of Vim.
 user_commands		User-defined commands.
-viminfo			Compiled with viminfo support.
-vim_starting		True while initial source'ing takes place. |startup|
 vertsplit		Compiled with vertically split windows |:vsplit|.
+vim_starting		True while initial source'ing takes place. |startup|
+viminfo			Compiled with viminfo support.
 virtualedit		Compiled with 'virtualedit' option.
 visual			Compiled with Visual mode.
 visualextra		Compiled with extra Visual mode commands.
@@ -6266,13 +6266,13 @@
 vreplace		Compiled with |gR| and |gr| commands.
 wildignore		Compiled with 'wildignore' option.
 wildmenu		Compiled with 'wildmenu' option.
-windows			Compiled with support for more than one window.
-winaltkeys		Compiled with 'winaltkeys' option.
 win16			Win16 version of Vim (MS-Windows 3.1).
 win32			Win32 version of Vim (MS-Windows 95/98/ME/NT/2000/XP).
-win64			Win64 version of Vim (MS-Windows 64 bit).
 win32unix		Win32 version of Vim, using Unix files (Cygwin)
+win64			Win64 version of Vim (MS-Windows 64 bit).
 win95			Win32 version for MS-Windows 95/98/ME.
+winaltkeys		Compiled with 'winaltkeys' option.
+windows			Compiled with support for more than one window.
 writebackup		Compiled with 'writebackup' default on.
 xfontset		Compiled with X fontset support |xfontset|.
 xim			Compiled with X input method support |xim|.
diff --git a/runtime/doc/gui_w32.txt b/runtime/doc/gui_w32.txt
index d71e90e..7b60c3b 100644
--- a/runtime/doc/gui_w32.txt
+++ b/runtime/doc/gui_w32.txt
@@ -1,4 +1,4 @@
-*gui_w32.txt*   For Vim version 7.3.  Last change: 2007 Aug 30
+*gui_w32.txt*   For Vim version 7.3.  Last change: 2010 Dec 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -293,7 +293,9 @@
 sense for most shell commands which produce output for Vim to use).  If you
 want Vim to start a program and return immediately, you can use the following
 syntax on W95 & NT: >
-	:!start {command}
+	:!start [/min] {command}
+The optional "/min" causes the window to be minimized.
+
 On Win32s, you will have to go to another window instead.  Don't forget that
 you must tell Windows 3.1x to keep executing a DOS command in the background
 while you switch back to Vim.
diff --git a/runtime/doc/index.txt b/runtime/doc/index.txt
index 1d3f0d5..bd9f382 100644
--- a/runtime/doc/index.txt
+++ b/runtime/doc/index.txt
@@ -1,4 +1,4 @@
-*index.txt*     For Vim version 7.3.  Last change: 2010 Jul 21
+*index.txt*     For Vim version 7.3.  Last change: 2011 Jan 04
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -29,7 +29,7 @@
 ==============================================================================
 1. Insert mode						*insert-index*
 
-tag		char		action	~
+tag		char		action in Insert mode	~
 -----------------------------------------------------------------------
 |i_CTRL-@|	CTRL-@		insert previously inserted text and stop
 				insert
@@ -459,7 +459,7 @@
 
 These can be used after an operator or in Visual mode to select an object.
 
-tag		command		   action in Normal mode	~
+tag		command		   action in op-pending and Visual mode	~
 ------------------------------------------------------------------------------
 |v_aquote|	a"		   double quoted string
 |v_a'|		a'		   single quoted string
@@ -721,6 +721,7 @@
 |gJ|		gJ		2  join lines without inserting space
 |gP|		["x]gP		2  put the text [from register x] before the
 				   cursor N times, leave the cursor after it
+|gQ|		gQ		    switch to "Ex" mode with Vim editing
 |gR|		gR		2  enter Virtual Replace mode
 |gU|		gU{motion}	2  make Nmove text uppercase
 |gV|		gV		   don't reselect the previous Visual area
@@ -951,11 +952,13 @@
 "Completion" below refers to context-sensitive completion.  It will complete
 file names, tags, commands etc. as appropriate.
 
+tag		command	      action in Command-line editing mode	~
+------------------------------------------------------------------------------
 		CTRL-@		not used
 |c_CTRL-A|	CTRL-A		do completion on the pattern in front of the
 				cursor and insert all matches
 |c_CTRL-B|	CTRL-B		cursor to begin of command-line
-|c_CTRL-C|	CTRL-C		same as <ESC>
+|c_CTRL-C|	CTRL-C		same as <Esc>
 |c_CTRL-D|	CTRL-D		list completions that match the pattern in
 				front of the cursor
 |c_CTRL-E|	CTRL-E		cursor to end of command-line
@@ -1046,6 +1049,8 @@
 mentioning any arguments.  The optional part of the command name is inside [].
 The commands are sorted on the non-optional part of their name.
 
+tag	      command	      action ~
+------------------------------------------------------------------------------
 |:!|		:!		filter lines or execute an external command
 |:!!|		:!!		repeat last ":!" command
 |:#|		:#		same as ":number"
diff --git a/runtime/doc/mlang.txt b/runtime/doc/mlang.txt
index c9baec4..c7b3df0 100644
--- a/runtime/doc/mlang.txt
+++ b/runtime/doc/mlang.txt
@@ -1,4 +1,4 @@
-*mlang.txt*     For Vim version 7.3.  Last change: 2010 Jul 20
+*mlang.txt*     For Vim version 7.3.  Last change: 2010 Dec 11
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -68,7 +68,7 @@
 			With the "ctype" argument the language used for
 			character encoding is set.  This affects the libraries
 			that Vim was linked with.  It's unusual to set this to
-			a different value from 'encoding'.  This sets
+			a different value from 'encoding' or "C".  This sets
 			$LC_CTYPE.
 			With the "time" argument the language used for time
 			and date messages is set.  This affects strftime().
diff --git a/runtime/doc/motion.txt b/runtime/doc/motion.txt
index f54b803..04d77fe 100644
--- a/runtime/doc/motion.txt
+++ b/runtime/doc/motion.txt
@@ -1033,20 +1033,20 @@
 
 For example, after three jump commands you have this jump list:
 
-  jump line  col file/line ~
+  jump line  col file/text ~
     3	  1    0 some text ~
     2	 70    0 another line ~
     1  1154   23 end. ~
  > ~
 
-The "file/line" column shows the file name, or the text at the jump if it is
+The "file/text" column shows the file name, or the text at the jump if it is
 in the current file (an indent is removed and a long line is truncated to fit
 in the window).
 
 You are currently in line 1167.  If you then use the CTRL-O command, the
 cursor is put in line 1154.  This results in:
 
-  jump line  col file/line ~
+  jump line  col file/text ~
     2	  1    0 some text ~
     1	 70    0 another line ~
  >  0  1154   23 end. ~
@@ -1076,7 +1076,7 @@
 After the CTRL-O command that got you into line 1154 you could give another
 jump command (e.g., "G").  The jump list would then become:
 
-  jump line  col file/line ~
+  jump line  col file/text ~
     4	  1    0 some text ~
     3	 70    0 another line ~
     2  1167    0 foo bar ~
diff --git a/runtime/doc/options.txt b/runtime/doc/options.txt
index 25f6c97..4b5df2d 100644
--- a/runtime/doc/options.txt
+++ b/runtime/doc/options.txt
@@ -1,4 +1,4 @@
-*options.txt*	For Vim version 7.3.  Last change: 2010 Dec 08
+*options.txt*	For Vim version 7.3.  Last change: 2010 Dec 11
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -2862,7 +2862,7 @@
 	When 'binary' is set, the value of 'fileformats' is not used.
 
 	Note that when Vim starts up with an empty buffer this option is not
-	use.  Set 'fileformat' in your .vimrc instead.
+	used.  Set 'fileformat' in your .vimrc instead.
 
 	For systems with a Dos-like <EOL> (<CR><NL>), when reading files that
 	are ":source"ed and for vimrc files, automatic <EOL> detection may be
diff --git a/runtime/doc/os_win32.txt b/runtime/doc/os_win32.txt
index 2a14f13..9557f2e 100644
--- a/runtime/doc/os_win32.txt
+++ b/runtime/doc/os_win32.txt
@@ -1,4 +1,4 @@
-*os_win32.txt*  For Vim version 7.3.  Last change: 2010 Jul 20
+*os_win32.txt*  For Vim version 7.3.  Last change: 2010 Dec 19
 
 
 		  VIM REFERENCE MANUAL    by George Reilly
@@ -313,6 +313,7 @@
    with :!start do not get passed Vim's open file handles, which means they do
    not have to be closed before Vim.
    To avoid this special treatment, use ":! start".
+   The optional "/min" argument causes the window to be minimized.
 
 Q. I'm using Win32s, and when I try to run an external command like "make",
    Vim doesn't wait for it to finish!  Help!
diff --git a/runtime/doc/repeat.txt b/runtime/doc/repeat.txt
index 331b6f9..eec13c0 100644
--- a/runtime/doc/repeat.txt
+++ b/runtime/doc/repeat.txt
@@ -1,4 +1,4 @@
-*repeat.txt*    For Vim version 7.3.  Last change: 2009 Nov 04
+*repeat.txt*    For Vim version 7.3.  Last change: 2011 Jan 06
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -102,7 +102,7 @@
 q{0-9a-zA-Z"}		Record typed characters into register {0-9a-zA-Z"}
 			(uppercase to append).  The 'q' command is disabled
 			while executing a register, and it doesn't work inside
-			a mapping.  {Vi: no recording}
+			a mapping and |:normal|.  {Vi: no recording}
 
 q			Stops recording.  (Implementation note: The 'q' that
 			stops recording is not stored in the register, unless
@@ -112,9 +112,13 @@
 @{0-9a-z".=*}		Execute the contents of register {0-9a-z".=*} [count]
 			times.  Note that register '%' (name of the current
 			file) and '#' (name of the alternate file) cannot be
-			used.  For "@=" you are prompted to enter an
-			expression.  The result of the expression is then
-			executed.  See also |@:|.  {Vi: only named registers}
+			used.
+			The register is executed like a mapping, that means
+			that the difference between 'wildchar' and 'wildcharm'
+			applies.
+			For "@=" you are prompted to enter an expression.  The
+			result of the expression is then executed.
+			See also |@:|.  {Vi: only named registers}
 
 							*@@* *E748*
 @@			Repeat the previous @{0-9a-z":*} [count] times.
diff --git a/runtime/doc/syntax.txt b/runtime/doc/syntax.txt
index 40a0f02..d56cc34 100644
--- a/runtime/doc/syntax.txt
+++ b/runtime/doc/syntax.txt
@@ -475,6 +475,26 @@
 This will use <br> at the end of each line and use "&nbsp;" for repeated
 spaces.
 
+If you do use the "<pre>" tags, <Tab> characters in the text are included in
+the generated output if they will have no effect on the appearance of the
+text and it looks like they are in the document intentionally. This allows for
+the HTML output to be copied and pasted from a browser without losing the
+actual whitespace used in the document.
+
+Specifically, <Tab> characters will be included if the 'tabstop' option is set
+to the default of 8, 'expandtab' is not set, and if neither the foldcolumn nor
+the line numbers are included in the HTML output (see options above). When any
+of these conditions are not met, any <Tab> characters in the text are expanded
+to the appropriate number of spaces in the HTML output.
+
+When "<pre>" is included, you can force |:TOhtml| to keep the tabs even if the
+other conditions are not met with: >
+   :let g:html_expand_tabs = 0
+Note that this can easily break text alignment and indentation in the HTML.
+
+Force tabs to be expanded even when they would be kept using: >
+   :let g:html_expand_tabs = 1
+
 For diff mode on a single file (with g:html_diff_one_file) a sequence of more
 than 3 filler lines is displayed as three lines with the middle line
 mentioning the total number of inserted lines.  If you prefer to see all the
diff --git a/runtime/doc/tagsrch.txt b/runtime/doc/tagsrch.txt
index 70c6c68..5334bb3 100644
--- a/runtime/doc/tagsrch.txt
+++ b/runtime/doc/tagsrch.txt
@@ -115,7 +115,7 @@
 
 The output of ":tags" looks like this:
 
-   # TO tag      FROM line in file/line
+   # TO tag      FROM line  in file/text
    1  1 main		 1  harddisk2:text/vim/test
  > 2  2 FuncA		58  i = FuncA(10);
    3  1 FuncC	       357  harddisk2:text/vim/src/amiga.c
@@ -135,7 +135,7 @@
 deleting/inserting lines, unless this was done by another program (e.g.
 another instance of Vim).
 
-For the current file, the "file/line" column shows the text at the position.
+For the current file, the "file/text" column shows the text at the position.
 An indent is removed and a long line is truncated to fit in the window.
 
 You can jump to previously used tags with several commands.  Some examples:
@@ -164,9 +164,9 @@
 deleted.  This means that an old branch in the call graph is lost.  After the
 commands explained above the tag stack will look like this:
 
-   # TO tag	FROM line in file
-   1 main	       1  harddisk2:text/vim/test
-   2 FuncB	      59  harddisk2:text/vim/src/main.c
+   # TO tag	FROM line  in file/text
+   1  1 main		1  harddisk2:text/vim/test
+   2  1 FuncB	       59  harddisk2:text/vim/src/main.c
 
 							*E73*
 When you try to use the tag stack while it doesn't contain anything you will
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index 10d1440..2277c41 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt*      For Vim version 7.3.  Last change: 2010 Dec 08
+*todo.txt*      For Vim version 7.3.  Last change: 2011 Jan 07
 
 
 		  VIM REFERENCE MANUAL	  by Bram Moolenaar
@@ -33,6 +33,9 @@
 'cursorline' is displayed too short when there are concealed characters and
 'list' is set, 'listchars' at default value. (Dennis Preiser, 2010 Aug 15)
 
+When running external command with ":make", cursor line is redrawn on top of
+external output.
+
 Conceal: using Tab for cchar causes problems.  Should reject it. (ZyX, 2010
 Aug 25)
 
@@ -44,6 +47,8 @@
 only one of the two ends gets the cchar displayed. (Brett Stahlman, 2010 Aug
 21, Ben Fritz, 2010 Sep 14)
 
+Bug in repeating Visual "u". (Lawrence Kesteloot, 2010 Dec 20)
+
 Windows keys not set properly on Windows 7?  (cncyber, 2010 Aug 26)
 
 This line hangs Vim, because of syntax HL:
@@ -52,11 +57,6 @@
 Building the MingW version without clipboard but with multi-byte doesn't
 work. (Bill Lam, 2010 Sep 18)
 
-When reading from stdin, don't enable signals before finishing reading?
-Otherwise the program producing the text may get killed by SIGWINCH.
-(Benjamin R. Haskell) Xavier: It's because reading from stdin returns -1.
-Patch from Xavier de Gaye, 2010 Dec 7.  More generic solution?
-
 Bug: E685 error for func_unref(). (ZyX, 2010 Aug 5)
 
 Using ":break" or something else that stops executing commands inside a
@@ -65,6 +65,13 @@
 
 Vim using lots of memory when joining lines. (John Little, 2010 Dec 3)
 
+On 64 bit MS-Windows "long" is only 32 bits, but we sometimes need to store a
+64 bits value.  Change all number options to use nropt_T and define it to the
+right type.
+
+Patch to improve mf_hash, dynamic sizing. (Ivan Krasilnikov, 2010 Dec 17)
+Needs tests.
+
 string() can't parse back "inf" and "nan".  Fix documentation or fix code?
 (ZyX, 2010 Aug 23)
 
@@ -74,9 +81,15 @@
 Patch to fix \%V item in regexp. (Christian Brabandt, 2010 Nov 8)
 Update Nov 19.  James Vega: still not right.  Christian: it's difficult.
 
+Patch to add up to 99 match groups. (Christian Brabandt, 2010 Dec 22)
+Also add named groups: \%{name}(re)  and \%{name}g
+
 Highlighting stops working after changing it many times.  Script to reproduce
 it: Pablo Contreras, 2010 Oct 12  Windows XP and 7.  Font is never freed?
 
+Loading autoload script even when usage is inside "if 0". (Christian Brabandt,
+2010 Dec 18)
+
 When 'cursorcolumn' is set locally to a window, ":new" opens a window with the
 same highlighting but 'cursorcolumn' is empty. (Tyru, 2010 Nov 15)
 
@@ -100,15 +113,7 @@
 Searching mixed with Visual mode doesn't redraw properly. (James Vega, 2010 Nov
 22)
 
-Win32: When using Chinese tear-off menu doesn't work. (Weasley, 2010 Oct 31)
-Patch by Alex Jakushev, 2010 Nov 2.
-
-Using ":call" inside "if 0" does not see that a function returns a Dict and
-gives error for "." as string concatenation.  (Yasuhiro Matsumoto, 2010 Oct 20)
-Patch: Oct 20.
-
-Patch to move check for emsg_not_now() up to avoid statusline not being
-updated. (James Vega, 2010 Nov 4)
+Patch to support ":!start /b cmd". (Xaizek, 2010 Dec 22)
 
 Copy/paste between Vim and Google chrome doesn't work well for multi-byte
 characters. (Ben Haskell, 2010 Sep 17)
@@ -128,6 +133,9 @@
 
 GTK: Patch to fix menu popping down. (Hong Xu, 2010 Dec 4, Dec 5)
 
+Python: Adding line to buffer other than the current one doesn't work
+correctly. (Rozbujnik, 2010 Dec 19)
+
 Patch to add 'systemencoding', convert between 'encoding' and this for file
 names, shell commands and the like.  (Kikuchan, 2010 Oct 14)
 Assume the system converts between the actual encoding of the filesystem to
@@ -171,11 +179,17 @@
 
 'cindent' not correct when 'list' is set. (Zdravi Korusef, 2010 Apr 15)
 
+When 'paste' is changed with 'pastetoggle', the ruler doesn't reflect this
+right away. (Samuel Ferencik, 2010 Dec 7)
+
 Windows installer: licence text should not use indent, causes bad word wrap.
 (Benjamin Fritz, 2010 Aug 16)
 
 Mac with X11: clipboard doesn't work properly. (Raf, 2010 Aug 16)
 
+Using CompilerSet doesn't record where an option was set from.  E.g., in the
+gcc compiler plugin. (Gary Johnson, 2010 Dec 13)
+
 ":helpgrep" does not put the cursor in the correct column when preceded by
 accented character. (Tony Mechelynck, 2010 Apr 15)
 
@@ -188,6 +202,9 @@
 
 Patch for GVimExt to show an icon. (Dominik Riebeling, 2010 Nov 7)
 
+When writing a file > 2Gbyte, the reported number of bytes is negative.
+(Antonio Colombo, 2010 Dec 18)
+
 Patch: Let rare word highlighting overrule good word highlighting.
 (Jakson A. Aquino, 2010 Jul 30)
 
@@ -200,9 +217,16 @@
 
 Crash in setqflist(). (Benoit Mortgat, 2010 Nov 18)
 
+Patch to handle resizing when tab is opened, when at full size. (Yukihiro
+Nakadaira, 2010 Jan 6)
+
 Writing nested List and Dict in viminfo gives error message and can't be read
 back. (Yukihiro Nakadaira, 2010 Nov 13)
 
+Can 'undolevels' be a buffer-local option?  Helps for making big changes in
+one file only, set 'ul' to -1 only for that buffer.
+Patch by Christian Brabandt, 2010 Dec 17.  Needs test.
+
 Dos uninstal may delete vim.bat from the wrong directory (e.g., when someone
 makes his own wrapper).  Add a magic string with the version number to the
 .bat file and check for it in the uninstaller.  E.g.
@@ -258,6 +282,9 @@
 Patch to support :undo absolute jump to file save number. (Christian Brabandt,
 2010 Nov 5)
 
+Patch to use 'foldnextmax' also for "marker" foldmethod. (Arnaud Lacombe, 2011
+Jan 7)
+
 When setting 'undofile' while the file is already loaded, but unchanged, try
 to read the undo file.  Requires computing a checksum of the text. (Andy
 Wokula)
@@ -297,6 +324,10 @@
 Cannot use getchar() inside :normal and using an expression mapping.  Is this
 supposed to work?  (XyX, 2010 Sep 22)
 
+When using an expression mapping with a multi-byte character each byte is
+converted to a utf-8 character. (ZyX, 2011 Jan 4)
+Patch for possible solution. (Yukihiro Nakadaira, 2011 Jan 5)
+
 When a:base in 'completefunc' starts with a number it's passed as a number,
 not a string. (Sean Ma)  Need to add flag to call_func_retlist() to force a
 string value.
@@ -458,18 +489,17 @@
 Using ~ works OK on 'a' with composing char, but not on 0x0418  with composing
 char 0x0301. (Tony Mechelynck, 2009 Mar 4)
 
+A function on a dictionary is not profiled. (Zyx, 2010 Dec 25)
+
 Inconsistent: starting with $LANG set to es_ES.utf-8 gives Spanish
 messages, even though locale is not supported.  But ":lang messages
 es_ES.utf-8" gives an error and doesn't switch messages. (Dominique Pelle,
 2009 Jan 26)
 
-When $HOME contains special characters, sich as a comma, escape them when used
+When $HOME contains special characters, such as a comma, escape them when used
 in an option. (Michael Hordijk, 2009 May 5)
 Turn "esc" argument of expand_env_esc() into string of chars to be escaped.
 
-Can 'undolevels' be a buffer-local option?  Helps for making big changes in
-one file only, set 'ul' to -1 only for that buffer.
-
 Should make 'ignorecase' global-local, so that it makes sense setting it from
 a modeline.
 
@@ -841,6 +871,9 @@
 moves the cursor instead of deleting. (Chris Kaiser, 2007 Sep 25)
 
 Patch to use Modern UI 2.0 for the Nsis installer. (Guopeng Wen, 2010 Jul 30)
+8   Windows install with NSIS: make it possible to do a silent install, see
+    http://nsis.sourceforge.net/Docs/Chapter4.html#4.12
+    Version from Guopeng Wen that does this (2010 Dec 27)
 
 Changes for Win32 makefile. (Mike Williams, 2007 Jan 22, Alexei Alexandrov,
 2007 Feb 8)
@@ -1566,8 +1599,6 @@
     scroll?
 7   Scrollbar width doesn't change when selecting other windows appearance.
     Also background color of Toolbar and rectangle below vert. scrollbar.
-7   "!start /min cmd" should run in a minimized window, instead of using
-    "/min" as the command name. (Rogall)
 6   Drawing text transparently doesn't seem to work (when drawing part cursor).
 8   CTRL key doesn't always work in combination with ALT key.  It does work
     for function keys, not for alphabetic characters.  Perhaps this is because
@@ -2330,8 +2361,6 @@
 
 
 User Friendlier:
-8   Windows install with NSIS: make it possible to do a silent install, see
-    http://nsis.sourceforge.net/Docs/Chapter4.html#4.12
 8   Windows install with install.exe: Use .exe instead of .bat files for
     links, so that command line arguments are passed on unmodified? (Walter
     Briscoe)
@@ -4455,6 +4484,8 @@
 7   Instead of filtering errors with a shell script it should be possible to
     do this with Vim script.  A function that filters the raw text that comes
     from the 'makeprg'?
+9   Add %F to 'errorformat': file name without spaces.  Useful on Unix to
+    avoid matching something up to a time 11:22:33.
 -   Add %b to 'errorformat': buffer number. (Yegappan Lakshmanan / Suresh
     Govindachar)
 7   Add a command that goes back to the position from before jumping to the
diff --git a/runtime/doc/undo.txt b/runtime/doc/undo.txt
index b806a31..e9406e6 100644
--- a/runtime/doc/undo.txt
+++ b/runtime/doc/undo.txt
@@ -1,4 +1,4 @@
-*undo.txt*      For Vim version 7.3.  Last change: 2010 Oct 21
+*undo.txt*      For Vim version 7.3.  Last change: 2010 Dec 19
 
 
 		  VIM REFERENCE MANUAL    by Bram Moolenaar
@@ -125,16 +125,23 @@
 
 							*:undol* *:undolist*
 :undol[ist]		List the leafs in the tree of changes.  Example:
-				number changes   time      saved ~
-				4      10	 10:34:11
-				18     4	 11:01:46  7
+			   number changes  when               saved ~
+			       88      88  2010/01/04 14:25:53
+			      108     107  08/07 12:47:51
+			      136      46  13:33:01             7
+			      166     164  3 seconds ago
 
 			The "number" column is the change number.  This number
 			continuously increases and can be used to identify a
 			specific undo-able change, see |:undo|.
 			The "changes" column is the number of changes to this
 			leaf from the root of the tree.
-			The "time" column is the time this change was made.
+			The "when" column is the date and time when this
+			change was made.  The four possible formats are:
+			    N seconds ago
+			    HH:MM:SS             hour, minute, seconds
+			    MM/DD HH:MM:SS       idem, with month and day
+			    YYYY/MM/DD HH:MM:SS  idem, with year
 			The "saved" column specifies, if this change was
 			written to disk and which file write it was. This can
 			be used with the |:later| and |:earlier| commands.