diff --git a/runtime/doc/xxd.1 b/runtime/doc/xxd.1
index fba0521..ccaeb22 100644
--- a/runtime/doc/xxd.1
+++ b/runtime/doc/xxd.1
@@ -62,12 +62,11 @@
 .IR \-b " | " \-bits
 Switch to bits (binary digits) dump, rather than hexdump.
 This option writes octets as eight digits "1"s and "0"s instead of a normal
-hexacecimal dump. Each line is preceded by a line number in hexadecimal and
+hexadecimal dump. Each line is preceded by a line number in hexadecimal and
 followed by an ascii (or ebcdic) representation. The command line switches
 \-r, \-p, \-i do not work with this mode.
 .TP
 .IR "\-c cols " | " \-cols cols"
-.IR "\-c cols " | " \-cols cols"
 format
 .RI < cols >
 octets per line. Default 16 (\-i: 12, \-ps: 30, \-b: 6). Max 256.
@@ -78,7 +77,7 @@
 meaningless in combinations with \-r, \-p or \-i.
 .TP
 .IR "\-g bytes " | " \-groupsize bytes"
-seperate the output of every
+separate the output of every
 .RI < bytes >
 bytes (two hex characters or eight bit-digits each) by a whitespace.
 Specify
@@ -139,7 +138,7 @@
 .PP
 .I xxd \-r
 has some builtin magic while evaluating line number information.
-If the ouput file is seekable, then the linenumbers at the start of each
+If the output file is seekable, then the linenumbers at the start of each
 hexdump line may be out of order, lines may be missing, or overlapping. In
 these cases xxd will lseek(2) to the next position. If the output file is not
 seekable, only gaps are allowed, which will be filled by null-bytes.
@@ -152,7 +151,7 @@
 skips everything on the input line after reading enough columns of hexadecimal
 data (see option \-c). This also means, that changes to the printable ascii (or
 ebcdic) columns are always ignored. Reverting a plain (or postscript) style
-hexdump with xxd \-r \-p does not depend on the correct number of columns. Here an thing that looks like a pair of hex-digits is interpreted.
+hexdump with xxd \-r \-p does not depend on the correct number of columns. Here anything that looks like a pair of hex-digits is interpreted.
 .PP
 Note the difference between
 .br
@@ -186,7 +185,7 @@
 \fI% sh \-c 'dd of=plain_snippet bs=1k count=1; xxd \-s +-768 > hex_snippet' < file
 .PP
 However, this is a rare situation and the use of `+' is rarely needed.
-the author prefers to monitor the effect of xxd with strace(1) or truss(1), whenever \-s is used.
+The author prefers to monitor the effect of xxd with strace(1) or truss(1), whenever \-s is used.
 .SH EXAMPLES
 .PP
 .br
@@ -208,17 +207,17 @@
 .br
 \fI% xxd \-l 120 \-ps \-c 20 xxd.1\fR
 .br
-2e544820585844203120224d616e75616c207061
+2e54482058584420312022417567757374203139
 .br
-676520666f7220787864220a2e5c220a2e5c2220
+39362220224d616e75616c207061676520666f72
 .br
-32317374204d617920313939360a2e5c22204d61
+20787864220a2e5c220a2e5c222032317374204d
 .br
-6e207061676520617574686f723a0a2e5c222020
+617920313939360a2e5c22204d616e2070616765
 .br
-2020546f6e79204e7567656e74203c746f6e7940
+20617574686f723a0a2e5c2220202020546f6e79
 .br
-7363746e7567656e2e7070702e67752e6564752e
+204e7567656e74203c746f6e79407363746e7567
 .br
 
 .br
@@ -226,32 +225,32 @@
 .br
 \fI% xxd \-l 120 \-c 12 xxd.1\fR
 .br
-0000000: 2e54 4820 5858 4420 3120 224d  .TH XXD 1 "M
+0000000: 2e54 4820 5858 4420 3120 2241  .TH XXD 1 "A
 .br
-000000c: 616e 7561 6c20 7061 6765 2066  anual page f
+000000c: 7567 7573 7420 3139 3936 2220  ugust 1996" 
 .br
-0000018: 6f72 2078 7864 220a 2e5c 220a  or xxd"..\\".
+0000018: 224d 616e 7561 6c20 7061 6765  "Manual page
 .br
-0000024: 2e5c 2220 3231 7374 204d 6179  .\\" 21st May
+0000024: 2066 6f72 2078 7864 220a 2e5c   for xxd"..\\
 .br
-0000030: 2031 3939 360a 2e5c 2220 4d61   1996..\\" Ma
+0000030: 220a 2e5c 2220 3231 7374 204d  "..\\" 21st M
 .br
-000003c: 6e20 7061 6765 2061 7574 686f  n page autho
+000003c: 6179 2031 3939 360a 2e5c 2220  ay 1996..\\" 
 .br
-0000048: 723a 0a2e 5c22 2020 2020 546f  r:..\\"    To
+0000048: 4d61 6e20 7061 6765 2061 7574  Man page aut
 .br
-0000054: 6e79 204e 7567 656e 7420 3c74  ny Nugent <t
+0000054: 686f 723a 0a2e 5c22 2020 2020  hor:..\\"    
 .br
-0000060: 6f6e 7940 7363 746e 7567 656e  ony@sctnugen
+0000060: 546f 6e79 204e 7567 656e 7420  Tony Nugent 
 .br
-000006c: 2e70 7070 2e67 752e 6564 752e  .ppp.gu.edu.
+000006c: 3c74 6f6e 7940 7363 746e 7567  <tony@sctnug
 .PP
 .br
 Display just the date from the file xxd.1
 .br
-\fI% xxd \-s 0x28 \-l 12 \-c 12 xxd.1\fR
+\fI% xxd \-s 0x36 \-l 13 \-c 13 xxd.1\fR
 .br
-0000028: 3231 7374 204d 6179 2031 3939  21st May 199
+0000036: 3231 7374 204d 6179 2031 3939 36  21st May 1996
 .PP
 .br
 Copy
@@ -266,11 +265,11 @@
 .br
 Patch the date in the file xxd.1
 .br
-\fI% echo '0000029: 3574 68' | xxd \-r \- xxd.1\fR
+\fI% echo '0000037: 3574 68' | xxd \-r \- xxd.1\fR
 .br
-\fI% xxd \-s 0x28 \-l 12 \-c 12 xxd.1\fR
+\fI% xxd \-s 0x36 \-l 13 \-c 13 xxd.1\fR
 .br
-0000028: 3235 7468 204d 6179 2031 3939  25th May 199
+0000036: 3235 7468 204d 6179 2031 3939 36  25th May 1996
 .PP
 .br
 Create a 65537 byte file with all bytes 0x00,