updated for version 7.0191
diff --git a/runtime/doc/pattern.txt b/runtime/doc/pattern.txt
index ca6431e..27804b0 100644
--- a/runtime/doc/pattern.txt
+++ b/runtime/doc/pattern.txt
@@ -1,4 +1,4 @@
-*pattern.txt* For Vim version 7.0aa. Last change: 2006 Jan 22
+*pattern.txt* For Vim version 7.0aa. Last change: 2006 Feb 01
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -821,7 +821,7 @@
{not in Vi}
WARNING: When the mark is moved after the pattern was used, the result
becomes invalid. Vim doesn't automatically update the matches.
- Similar to moving the cursor for |\%#|.
+ Similar to moving the cursor for "\%#" |/\%#|.
*/\%l* */\%>l* */\%<l*
\%23l Matches in a specific line.
diff --git a/runtime/doc/quickfix.txt b/runtime/doc/quickfix.txt
index bdda74f..5430be0 100644
--- a/runtime/doc/quickfix.txt
+++ b/runtime/doc/quickfix.txt
@@ -1,4 +1,4 @@
-*quickfix.txt* For Vim version 7.0aa. Last change: 2006 Jan 29
+*quickfix.txt* For Vim version 7.0aa. Last change: 2006 Jan 30
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -311,14 +311,17 @@
When the quickfix window has been filled, two autocommand events are
triggered. First the 'filetype' option is set to "qf", which triggers the
-FileType event. Then the BufReadPost event is triggered. This can be used to
-perform some action on the listed errors. Example: >
+FileType event. Then the BufReadPost event is triggered, using "quickfix" for
+the buffer name. This can be used to perform some action on the listed
+errors. Example: >
au BufReadPost quickfix setlocal modifiable
\ | silent exe 'g/^/s//\=line(".")." "/'
\ | setlocal nomodifiable
This prepends the line number to each line. Note the use of "\=" in the
substitute string of the ":s" command, which is used to evaluate an
expression.
+The BufWinEnter event is also triggered, again using "quickfix" for the buffer
+name.
Note: Making changes in the quickfix window has no effect on the list of
errors. 'modifiable' is off to avoid making changes. If you delete or insert
@@ -332,7 +335,8 @@
open a location list window, it is created below the current window and
displays the location list for the current window. The location list window
is similar to the quickfix window, except that you can have more than one
-location list window open at a time.
+location list window open at a time. When you use a location list command in
+this window, the displayed location list is used.
When you select a file from the location list window, the following steps are
used to find a window to edit the file:
diff --git a/runtime/doc/spell.txt b/runtime/doc/spell.txt
index f9559c8..43d6fe3 100644
--- a/runtime/doc/spell.txt
+++ b/runtime/doc/spell.txt
@@ -1,4 +1,4 @@
-*spell.txt* For Vim version 7.0aa. Last change: 2006 Jan 25
+*spell.txt* For Vim version 7.0aa. Last change: 2006 Feb 01
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -261,6 +261,10 @@
this succeeds then additionally files with the name LL.EEE.add.spl are loaded.
All the ones that are found are used.
+If no spell file is found the |SpellFileMissing| autocommand event is
+triggered. This may trigger the |spellfile.vim| plugin to offer you
+downloading the spell file.
+
Additionally, the files related to the names in 'spellfile' are loaded. These
are the files that |zg| and |zw| add good and wrong words to.
@@ -560,6 +564,48 @@
Comment lines with the name of the .spl file are used as a header above the
words that were generated from that .spl file.
+
+SPELL FILE MISSING *spell-SpellFileMissing* *spellfile.vim*
+
+If the spell file for the language you are using is not available, you will
+get an error message. But if the "spellfile.vim" plugin is active it will
+offer you to download the spell file. Just follow the instructions, it will
+ask you where to write the file.
+
+The plugin has a default place where to look for spell files, on the Vim ftp
+server. If you want to use another location or another protocol, set the
+g:spellfile_URL variable to the directory that holds the spell files. The
+|netrw| plugin is used for getting the file, look there for the speficic
+syntax of the URL. Example: >
+ let g:spellfile_URL = 'http://ftp.vim.org/vim/runtime/spell'
+You may need to escape special characters.
+
+The plugin will only ask about downloading a language once. If you want to
+try again anyway restart Vim, or set g:spellfile_URL to another value (e.g.,
+prepend a space).
+
+To avoid using the "spellfile.vim" plugin do this in your vimrc file: >
+
+ let loaded_spellfile_plugin = 1
+
+Instead of using the plugin you can define a |SpellFileMissing| autocommand to
+handle the missing file yourself. You can use it like this: >
+
+ :au SpellFileMissing * call Download_spell_file(expand('<amatch>'))
+
+Thus the <amatch> item contains the name of the language. Another important
+value is 'encoding', since every encoding has its own spell file. With two
+exceptions:
+- For ISO-8859-15 (latin9) the name "latin1" is used (the encodings only
+ differ in characters not used in dictionary words).
+- The name "ascii" may also be used for some languages where the words use
+ only ASCII letters for most of the words.
+
+The default "spellfile.vim" plugin uses this autocommand, if you define your
+autocommand afterwars you may want to use ":au! SpellFileMissing" to overrule
+it. If you define your autocommand before the plugin is loaded it will notice
+this and not do anything.
+
==============================================================================
4. Spell file format *spell-file-format*
diff --git a/runtime/doc/tagsrch.txt b/runtime/doc/tagsrch.txt
index 522eb2a..f35f165 100644
--- a/runtime/doc/tagsrch.txt
+++ b/runtime/doc/tagsrch.txt
@@ -257,6 +257,17 @@
:tl[ast][!] Jump to last matching tag. See |tag-!| for [!]. {not
in Vi}
+ *:lt* *:ltag*
+:lt[ag][!] [ident] Jump to tag [ident] and add the matching tags to a new
+ location list for the current window. [ident] can be
+ a regexp pattern, see |tag-regexp|. When [ident] is
+ not given, the last tag name from the tag stack is
+ used. The search pattern to locate the tag line is
+ prefixed with "\V" to escape all the special
+ characters (very nomagic). The location list showing
+ the matching tags is independent of the tag stack.
+ See |tag-!| for [!].
+ {not in Vi}
When there is no other message, Vim shows which matching tag has been jumped
to, and the number of matching tags: >
@@ -275,6 +286,7 @@
missing files. When the end of the list of matches has been reached, an error
message is given.
+ *tag-preview*
The tag match list can also be used in the preview window. The commands are
the same as above, with a "p" prepended.
{not available when compiled without the |+quickfix| feature}
diff --git a/runtime/doc/todo.txt b/runtime/doc/todo.txt
index efec6ca..7bf4040 100644
--- a/runtime/doc/todo.txt
+++ b/runtime/doc/todo.txt
@@ -1,4 +1,4 @@
-*todo.txt* For Vim version 7.0aa. Last change: 2006 Jan 29
+*todo.txt* For Vim version 7.0aa. Last change: 2006 Feb 01
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -30,8 +30,6 @@
*known-bugs*
-------------------- Known bugs and current work -----------------------
-Truncating error message keeps one char too many, causes an empty line.
-
Variant of ":helpgrep" that uses a location list? How about:
:lhelpgrep (use local list in help window, not current window)
:lgrep
@@ -64,18 +62,14 @@
struct pointer).
- Special mappings for when the popup menu is visible? Would allow for making
a specific selection (e.g, methods vs variables).
-- Provide a function to popup the menu, so that an insert mode mapping can
- start it (with a specific selection).
spelling:
- Also use the spelling dictionary for dictionary completion.
- When 'dictionary' is empty and/or when "kspell" is in 'complete'.
+ When 'dictionary' is empty and/or when "kspell" is in 'complete'.
- Use runtime/cleanadd script to cleanup .add files. When to invoke it?
After deleting a word with "zw" and some timestamp difference perhaps?
Store it as spell/cleanadd.vim.
- suggestion for "KG" to "kg" when it's keepcase.
-- Autocommand event for when a spell file is missing. Allows making a plugin
- that fetches the file over internet. Pattern == language.
- Using KEEPCASE flag still allows all-upper word, docs say it doesn't.
Don't allow it, because there is no other way to do this.
- Implement NOSUGGEST flag (used for obscene words).
@@ -252,6 +246,8 @@
Completion in .NET framework SharpDevelop: http://www.icsharpcode.net
- Pre-expand abbreviations, show which abbrevs would match?
+ - Provide a function to popup the menu, so that an insert mode mapping can
+ start it (with a specific selection).
- UNDO TREE: keep all states of the text, don't delete undo info.
When making a change, instead of clearing any future undo (thus redo)
@@ -409,10 +405,6 @@
Add gui_mch_browsedir() for Motif, Mac OS/X.
-Implement:
- :ltag list of matching tags, like :tselect
-Patch from Yegappan Lakshmanan, Jan 13.
-
HTML indenting can be slow, find out why. Any way to do some kind of
profiling for Vim script? At least add a function to get the current time in
usec. reltime([start, [end]])
@@ -2101,14 +2093,10 @@
Tags:
-8 Add a function that returns the line in the tags file for a matching tag.
- Can be used to extract more info (class name, inheritance, etc.) (Rico
- Hendriks)
7 Count before CTRL-]: jump to N'th match
8 Scope arguments for ":tag", e.g.: ":tag class:cPage open", like Elvis.
8 When output of ":tselect" is long, getting the more-prompt, should be able
to type the tag number directly.
-7 Add a tag-select window. Works like ":cwindow". (Michal Malecki)
7 Add the possibility to use the "-t {tag}" argument multiple times. Open a
window for each tag.
7 Make output of ":tselect" a bit nicer. Use highlighting?
@@ -3321,8 +3309,7 @@
next <li>, ]< to next </li>, [< to previous </li>.
8 Add ":rename" command: rename the file of the current buffer and rename
the buffer. Buffer may be modified.
-- Perhaps ":cexpr" could read errors from a list?
- Add %b to 'errorformat': buffer number. (Yegappan Lakshmanan / Suresh
+- Add %b to 'errorformat': buffer number. (Yegappan Lakshmanan / Suresh
Govindachar)
6 In the quickfix window statusline add the command used to get the list of
errors, e.g. ":make foo", ":grep something *.c".
diff --git a/runtime/doc/version7.txt b/runtime/doc/version7.txt
index a5db46d..053e7d1 100644
--- a/runtime/doc/version7.txt
+++ b/runtime/doc/version7.txt
@@ -1,4 +1,4 @@
-*version7.txt* For Vim version 7.0aa. Last change: 2006 Jan 28
+*version7.txt* For Vim version 7.0aa. Last change: 2006 Feb 01
VIM REFERENCE MANUAL by Bram Moolenaar
@@ -449,6 +449,8 @@
|:caddexpr| Add error messages from a Vim expression to an
existing quickfix list. (Yegappan Lakshmanan).
+|:ltag| Jump to a tag and add matching tags to a location list.
+
Ex command modifiers: ~
@@ -547,6 +549,8 @@
|QuickFixCmdPost| after :make, :grep et al. (Ciaran McCreesh)
|SessionLoadPost| after loading a session file. (Yegappan Lakshmanan)
+|SpellFileMissing| when a spell file can't be found
+
New items in search patterns: ~
|/\%d| \%d123 search for character with decimal number
@@ -1629,4 +1633,7 @@
":set sta ts=8 sw=4 sts=2" deleted 4 spaces halfway a line instead of 2.
+In a multi-byte file the foldmarker could be recognized in the trail byte.
+(Taro Muraoka)
+
vim:tw=78:ts=8:ft=help:norl: