diff --git a/src/Make_bc5.mak b/src/Make_bc5.mak
new file mode 100644
index 0000000..73d9440
--- /dev/null
+++ b/src/Make_bc5.mak
@@ -0,0 +1,1006 @@
+#
+# Makefile for Vim.
+# Compiler: Borland C++ 5.0 and later 32-bit compiler
+#  Targets: Dos16 or Win32 (Windows NT and Windows 95) (with/without GUI)
+#
+# Contributed by Ben Singer.
+# Updated 4/1997 by Ron Aaron
+#	6/1997 - added support for 16 bit DOS
+#	Note: this has been tested, and works, for BC5.  Your mileage may vary.
+#	Has been reported NOT to work with BC 4.52.  Maybe it can be fixed?
+#	10/1997 - ron - fixed bugs w/ BC 5.02
+#	8/1998 - ron - updated with new targets, fixed some stuff
+#	3/2000 - Bram: Made it work with BC 5.5 free command line compiler,
+#			cleaned up variables.
+#	6/2001 - Dan - Added support for compiling Python and TCL
+#	7/2001 - Dan - Added support for compiling Ruby
+#
+# It builds on Windows 95 and NT-Intel, producing the same binary in either
+# case.  To build using Microsoft Visual C++, use Make_mvc.mak.
+#
+# This should work with the free Borland command line compiler, version 5.5.
+# You need at least sp1 (service pack 1).  With sp2 it compiles faster.
+# Use a command like this:
+# <path>\bin\make /f Make_bc5.mak BOR=<path>
+#
+
+# let the make utility do the hard work:
+.AUTODEPEND
+.CACHEAUTODEPEND
+
+# VARIABLES:
+# name		value (default)
+#
+# BOR		path to root of Borland C install (c:\bc5)
+# LINK		name of the linker ($(BOR)\bin\ilink if OSTYPE is DOS16,
+#		$(BOR)\bin\ilink32 otherwise)
+# GUI		no or yes: set to yes if you want the GUI version (yes)
+# PERL		define to path to Perl dir to get Perl support (not defined)
+#   PERL_VER	  define to version of Perl being used (56)
+#   DYNAMIC_PERL  no or yes: set to yes to load the Perl DLL dynamically (no)
+# PYTHON	define to path to Python dir to get PYTHON support (not defined)
+#   PYTHON_VER	    define to version of Python being used (22)
+#   DYNAMIC_PYTHON  no or yes: use yes to load the Python DLL dynamically (no)
+# TCL		define to path to TCL dir to get TCL support (not defined)
+#   TCL_VER	define to version of TCL being used (83)
+#   DYNAMIC_TCL no or yes: use yes to load the TCL DLL dynamically (no)
+# RUBY		define to path to Ruby dir to get Ruby support (not defined)
+#		NOTE: You may have to remove the defines for uid_t and gid_t
+#		from the Ruby config.h header file.
+#   RUBY_VER	define to version of Ruby being used (16)
+#		NOTE: compilation on WinNT/2K/XP requires
+#		at least version 1.6.5 of Ruby.  Earlier versions
+#		of Ruby will cause a compile error on these systems.
+#   DYNAMIC_RUBY no or yes: use yes to load the Ruby DLL dynamically (no)
+# MBYTE		no or yes: set to yes for multi-byte support (yes)
+# IME		no or yes: set to yes for multi-byte IME support (yes)
+#   DYNAMIC_IME no or yes: set to yes to load imm32.dll dynamically (yes)
+# GETTEXT	no or yes: set to yes for multi-language support (yes)
+# ICONV		no or yes: set to yes for dynamic iconv support (yes)
+# OLE		no or yes: set to yes to make OLE gvim (no)
+# OSTYPE	DOS16 or WIN32 (WIN32)
+# DEBUG		no or yes: set to yes if you wish a DEBUGging build (no)
+# CODEGUARD	no or yes: set to yes if you want to use CODEGUARD (no)
+# CPUNR		1 through 6: select -CPU argument to compile with (3)
+#		3 for 386, 4 for 486, 5 for pentium, 6 for pentium pro.
+# USEDLL	no or yes: set to yes to use the Runtime library DLL (no)
+#		For USEDLL=yes the cc3250.dll is required to run Vim.
+# VIMDLL	no or yes: create vim32.dll, and stub (g)vim.exe (no)
+# ALIGN		1, 2 or 4: Alignment to use (4 for Win32, 2 for DOS16)
+# FASTCALL	no or yes: set to yes to use register-based function protocol (yes)
+# OPTIMIZE	SPACE, SPEED, or MAXSPEED: type of optimization (MAXSPEED)
+# POSTSCRIPT	no or yes: set to yes for PostScript printing
+# FEATURES	TINY, SMALL, NORMAL, BIG or HUGE
+#		(BIG for WIN32, SMALL for DOS16)
+# WINVER	0x0400 or 0x0500: minimum Win32 version to support (0x0400)
+# CSCOPE	no or yes: include support for Cscope interface (yes)
+# NETBEANS	no or yes: include support for Netbeans interface (yes if GUI
+#		is yes)
+# XPM		define to path to XPM dir to get support for loading XPM images.
+
+### BOR: root of the BC installation
+!if ("$(BOR)"=="")
+BOR = c:\bc5
+!endif
+
+### LINK: Name of the linker: tlink or ilink32 (this is below, depends on
+# $(OSTYPE)
+
+### GUI: yes for GUI version, no for console version
+!if ("$(GUI)"=="")
+GUI = yes
+!endif
+
+### MBYTE: yes for multibyte support, no to disable it.
+!if ("$(MBYTE)"=="")
+MBYTE = yes
+!endif
+
+### IME: yes for multibyte support, no to disable it.
+!if ("$(IME)"=="")
+IME = yes
+!endif
+!if ("$(DYNAMIC_IME)"=="")
+DYNAMIC_IME = yes
+!endif
+
+### GETTEXT: yes for multilanguage support, no to disable it.
+!if ("$(GETTEXT)"=="")
+GETTEXT = yes
+!endif
+
+### ICONV: yes to enable dynamic-iconv support, no to disable it
+!if ("$(ICONV)"=="")
+ICONV = yes
+!endif
+
+### CSCOPE: yes to enable Cscope support, no to disable it
+!if ("$(CSCOPE)"=="")
+CSCOPE = yes
+!endif
+
+### NETBEANS: yes to enable NetBeans interface support, no to disable it
+!if ("$(NETBEANS)"=="") && ("$(GUI)"=="yes")
+NETBEANS = yes
+!endif
+
+### PERL: uncomment this line if you want perl support in vim
+# PERL=c:\perl
+
+### PYTHON: uncomment this line if you want python support in vim
+# PYTHON=c:\python22
+
+### RUBY: uncomment this line if you want ruby support in vim
+# RUBY=c:\ruby
+
+### TCL: uncomment this line if you want tcl support in vim
+# TCL=c:\tcl
+
+### OLE: no for normal gvim, yes for OLE-capable gvim (only works with GUI)
+#OLE = yes
+
+### OSTYPE: DOS16 for Windows 3.1 version, WIN32 for Windows 95/98/NT/2000
+#   version
+!if ("$(OSTYPE)"=="")
+OSTYPE = WIN32
+!endif
+
+### DEBUG: Uncomment to make an executable for debugging
+# DEBUG = yes
+!if ("$(DEBUG)"=="yes")
+DEBUG_FLAG = -v
+!endif
+
+### CODEGUARD: Uncomment to use the CODEGUARD stuff (BC 5.0 or later):
+# CODEGUARD = yes
+!if ("$(CODEGUARD)"=="yes")
+CODEGUARD_FLAG = -vG
+!endif
+
+### CPUNR: set your target processor (3 to 6)
+!if ("$(CPUNR)" == "i386") || ("$(CPUNR)" == "3")
+CPUNR = 3
+!elif ("$(CPUNR)" == "i486") || ("$(CPUNR)" == "4")
+CPUNR = 4
+!elif ("$(CPUNR)" == "i586") || ("$(CPUNR)" == "5")
+CPUNR = 5
+!elif ("$(CPUNR)" == "i686") || ("$(CPUNR)" == "6")
+CPUNR = 6
+!else
+CPUNR = 3
+!endif
+
+### Comment out to use precompiled headers (faster, but uses lots of disk!)
+HEADERS = -H -H=vim.csm -Hc
+
+### USEDLL: no for statically linked version of run-time, yes for DLL runtime
+!if ("$(USEDLL)"=="")
+USEDLL = no
+!endif
+
+### VIMDLL: yes for a DLL version of VIM (NOT RECOMMENDED), no otherwise
+#VIMDLL = yes
+
+### ALIGN: alignment you desire: (1,2 or 4: s/b 4 for Win32, 2 for DOS)
+!if ("$(ALIGN)"=="")
+!if ($(OSTYPE)==DOS16)
+ALIGN = 2
+!else
+ALIGN = 4
+!endif
+!endif
+
+### FASTCALL: yes to use FASTCALL calling convention (RECOMMENDED!), no otherwise
+#   Incompatible when calling external functions (like MSVC-compiled DLLs), so
+#   don't use FASTCALL when linking with external libs.
+!if ("$(FASTCALL)"=="") && \
+	("$(PYTHON)"=="") && \
+	("$(PERL)"=="") && \
+	("$(TCL)"=="") && \
+	("$(RUBY)"=="") && \
+	("$(ICONV)"!="yes") && \
+	("$(IME)"!="yes") && \
+	("$(MBYTE)"!="yes") && \
+	("$(XPM)"=="")
+FASTCALL = yes
+!endif
+
+### OPTIMIZE: SPEED to optimize for speed, SPACE otherwise (SPEED RECOMMENDED)
+!if ("$(OPTIMIZE)"=="")
+OPTIMIZE = MAXSPEED
+!endif
+
+### FEATURES: TINY, SMALL, NORMAL, BIG or HUGE (BIG for WIN32, SMALL for DOS16)
+!if ("$(FEATURES)"=="")
+! if ($(OSTYPE)==DOS16)
+FEATURES = SMALL
+! else
+FEATURES = BIG
+! endif
+!endif
+
+### POSTSCRIPT: uncomment this line if you want PostScript printing
+#POSTSCRIPT = yes
+
+###
+# If you have a fixed directory for $VIM or $VIMRUNTIME, other than the normal
+# default, use these lines.
+#VIMRCLOC = somewhere
+#VIMRUNTIMEDIR = somewhere
+
+### Set the default $(WINVER) to make it work with Bcc 5.5.
+!ifndef WINVER
+WINVER = 0x0400
+!endif
+
+#
+# Sanity checks for the above options:
+#
+
+!if ($(OSTYPE)==DOS16)
+!if (($(CPUNR)+0)>4)
+!error CPUNR Must be less than or equal to 4 for DOS16
+!endif
+
+!if (($(ALIGN)+0)>2)
+!error ALIGN Must be less than or equal to 2 for DOS16
+!endif
+
+!else	# not DOS16
+!if (($(CPUNR)+0)<3)
+!error CPUNR Must be greater or equal to 3 for WIN32
+!endif
+!endif
+
+!if ($(OSTYPE)!=WIN32) && ($(OSTYPE)!=DOS16)
+!error Check the OSTYPE variable again: $(OSTYPE) is not supported!
+!endif
+
+#
+# Optimizations: change as desired (RECOMMENDATION: Don't change!):
+#
+!if ("$(DEBUG)"=="yes")
+OPT = -Od -N
+!else
+!if ("$(OPTIMIZE)"=="SPACE")
+OPT = -O1 -f- -d
+!elif ("$(OPTIMIZE)"=="MAXSPEED")
+OPT = -O2 -f- -d -Ocavi -O
+!else
+OPT = -O2 -f- -d -Oc -O
+!endif
+!if ("$(FASTCALL)"=="yes")
+OPT = $(OPT) -pr
+!endif
+!if ("$(CODEGUARD)"!="yes")
+OPT = $(OPT) -vi-
+!endif
+!endif
+!if ($(OSTYPE)==DOS16)
+!undef GUI
+!undef VIMDLL
+!undef USEDLL
+!endif
+# shouldn't have to change:
+LIB = $(BOR)\lib
+INCLUDE = $(BOR)\include;.;proto
+DEFINES = -DFEAT_$(FEATURES) -DWIN32 -DHAVE_PATHDEF \
+	  -DWINVER=$(WINVER) -D_WIN32_WINNT=$(WINVER)
+
+!ifdef PERL
+INTERP_DEFINES = $(INTERP_DEFINES) -DFEAT_PERL
+INCLUDE = $(PERL)\lib\core;$(INCLUDE)
+!  ifndef PERL_VER
+PERL_VER = 56
+!  endif
+!  if ("$(DYNAMIC_PERL)" == "yes")
+!    if ($(PERL_VER) > 55)
+INTERP_DEFINES = $(INTERP_DEFINES) -DDYNAMIC_PERL -DDYNAMIC_PERL_DLL=\"perl$(PERL_VER).dll\"
+PERL_LIB_FLAG = /nodefaultlib:
+!    else
+!      message "Cannot dynamically load Perl versions less than 5.6.  Loading statically..."
+!    endif
+!  endif
+!endif
+
+!ifdef PYTHON
+INTERP_DEFINES = $(INTERP_DEFINES) -DFEAT_PYTHON
+INCLUDE = $(PYTHON)\include;$(INCLUDE)
+!ifndef PYTHON_VER
+PYTHON_VER = 22
+!endif
+!if "$(DYNAMIC_PYTHON)" == "yes"
+INTERP_DEFINES = $(INTERP_DEFINES) -DDYNAMIC_PYTHON -DDYNAMIC_PYTHON_DLL=\"python$(PYTHON_VER).dll\"
+PYTHON_LIB_FLAG = /nodefaultlib:
+!endif
+!endif
+
+!ifdef RUBY
+!ifndef RUBY_VER
+RUBY_VER = 16
+!endif
+!ifndef RUBY_VER_LONG
+RUBY_VER_LONG = 1.6
+!endif
+
+!if "$(RUBY_VER)" == "16"
+!ifndef RUBY_PLATFORM
+RUBY_PLATFORM = i586-mswin32
+!endif
+!ifndef RUBY_INSTALL_NAME
+RUBY_INSTALL_NAME = mswin32-ruby$(RUBY_VER)
+!endif
+!else
+!ifndef RUBY_PLATFORM
+RUBY_PLATFORM = i386-mswin32
+!endif
+!ifndef RUBY_INSTALL_NAME
+RUBY_INSTALL_NAME = msvcrt-ruby$(RUBY_VER)
+!endif
+!endif
+
+INTERP_DEFINES = $(INTERP_DEFINES) -DFEAT_RUBY
+INCLUDE = $(RUBY)\lib\ruby\$(RUBY_VER_LONG)\$(RUBY_PLATFORM);$(INCLUDE)
+
+!if "$(DYNAMIC_RUBY)" == "yes"
+INTERP_DEFINES = $(INTERP_DEFINES) -DDYNAMIC_RUBY -DDYNAMIC_RUBY_DLL=\"$(RUBY_INSTALL_NAME).dll\"
+INTERP_DEFINES = $(INTERP_DEFINES) -DDYNAMIC_RUBY_VER=$(RUBY_VER)
+RUBY_LIB_FLAG = /nodefaultlib:
+!endif
+!endif
+
+!ifdef TCL
+INTERP_DEFINES = $(INTERP_DEFINES) -DFEAT_TCL
+INCLUDE = $(TCL)\include;$(INCLUDE)
+!ifndef TCL_VER
+TCL_VER = 83
+!endif
+TCL_LIB = $(TCL)\lib\tcl$(TCL_VER).lib
+TCL_LIB_FLAG =
+!if "$(DYNAMIC_TCL)" == "yes"
+INTERP_DEFINES = $(INTERP_DEFINES) -DDYNAMIC_TCL -DDYNAMIC_TCL_DLL=\"tcl$(TCL_VER).dll\"
+TCL_LIB = tclstub$(TCL_VER)-bor.lib
+TCL_LIB_FLAG =
+!endif
+!endif
+#
+# DO NOT change below:
+#
+CPUARG = -$(CPUNR)
+ALIGNARG = -a$(ALIGN)
+#
+!if ("$(DEBUG)"=="yes")
+DEFINES=$(DEFINES) -DDEBUG
+!endif
+#
+!if ("$(OLE)"=="yes")
+DEFINES = $(DEFINES) -DFEAT_OLE
+!endif
+#
+!if ("$(MBYTE)"=="yes")
+MBDEFINES = $(MBDEFINES) -DFEAT_MBYTE
+!endif
+!if ("$(IME)"=="yes")
+MBDEFINES = $(MBDEFINES) -DFEAT_MBYTE_IME
+!if ("$(DYNAMIC_IME)" == "yes")
+MBDEFINES = $(MBDEFINES) -DDYNAMIC_IME
+!endif
+!endif
+!if ("$(ICONV)"=="yes")
+MBDEFINES = $(MBDEFINES) -DDYNAMIC_ICONV
+!endif
+!if ("$(GETTEXT)"=="yes")
+MBDEFINES = $(MBDEFINES) -DDYNAMIC_GETTEXT
+!endif
+
+!if ("$(CSCOPE)"=="yes")
+DEFINES = $(DEFINES) -DFEAT_CSCOPE
+!endif
+
+!if ("$(NETBEANS)"=="yes")
+DEFINES = $(DEFINES) -DFEAT_NETBEANS_INTG
+!if ("$(DEBUG)"=="yes")
+DEFINES = $(DEFINES) -DNBDEBUG
+NBDEBUG_DEP = nbdebug.h nbdebug.c
+!endif
+!endif
+
+!ifdef XPM
+DEFINES = $(DEFINES) -DFEAT_XPM_W32
+INCLUDE = $(XPM)\include;$(INCLUDE)
+!endif
+
+!if ("$(GUI)"=="yes")
+DEFINES = $(DEFINES) -DFEAT_GUI_W32 -DFEAT_CLIPBOARD
+!if ("$(DEBUG)"=="yes")
+TARGET = gvimd.exe
+!else
+TARGET = gvim.exe
+!endif
+!if ("$(VIMDLL)"=="yes")
+EXETYPE=-WD
+DEFINES = $(DEFINES) -DVIMDLL
+!else
+EXETYPE=-W
+!endif
+STARTUPOBJ = c0w32.obj
+LINK2 = -aa
+RESFILE = vim.res
+!else
+!if ("$(DEBUG)"=="yes")
+TARGET = vimd.exe
+!else
+# for now, anyway: VIMDLL is only for the GUI version
+!undef VIMDLL
+TARGET = vim.exe
+!endif
+!if ($(OSTYPE)==DOS16)
+DEFINES= -DFEAT_$(FEATURES) -DMSDOS
+EXETYPE=-ml
+STARTUPOBJ = c0l.obj
+LINK2 =
+!else
+EXETYPE=-WC
+STARTUPOBJ = c0x32.obj
+LINK2 = -ap -OS -o -P
+!endif
+RESFILE = vim.res
+!endif
+
+!if ("$(USEDLL)"=="yes")
+DEFINES = $(DEFINES) -D_RTLDLL
+!endif
+
+!if ("$(DEBUG)"=="yes")
+OBJDIR	= $(OSTYPE)\objdbg
+!else
+!if ("$(GUI)"=="yes")
+!if ("$(OLE)"=="yes")
+OBJDIR	= $(OSTYPE)\oleobj
+!else
+OBJDIR	= $(OSTYPE)\gobj
+!endif
+!else
+OBJDIR	= $(OSTYPE)\obj
+!endif
+!endif
+
+!if ("$(POSTSCRIPT)"=="yes")
+DEFINES = $(DEFINES) -DMSWINPS
+!endif
+
+##### BASE COMPILER/TOOLS RULES #####
+MAKE = $(BOR)\bin\make
+CFLAGS = -w-aus -w-par -w-pch -w-ngu -w-csu -I$(INCLUDE)
+!if ($(OSTYPE)==DOS16)
+BRC =
+!if ("$(LINK)"=="")
+LINK	= $(BOR)\BIN\TLink
+!endif
+CC   = $(BOR)\BIN\Bcc
+LFLAGS	= -Tde -c -m -L$(LIB) $(DEBUG_FLAG) $(LINK2)
+LFLAGSDLL  =
+CFLAGS = $(CFLAGS) -H- $(HEADERS)
+!else
+BRC = $(BOR)\BIN\brc32
+!if ("$(LINK)"=="")
+LINK	= $(BOR)\BIN\ILink32
+!endif
+CC   = $(BOR)\BIN\Bcc32
+LFLAGS	= -OS -Tpe -c -m -L$(LIB) $(DEBUG_FLAG) $(LINK2)
+LFLAGSDLL  = -Tpd -c -m -L$(LIB) $(DEBUG_FLAG) $(LINK2)
+CFLAGS = $(CFLAGS) -d -RT- -k- -Oi $(HEADERS) -f-
+!endif
+
+CC1 = -c
+CC2 = -o
+CCARG = +$(OBJDIR)\bcc.cfg
+
+# implicit rules:
+
+# Without the following, the implicit rule in BUILTINS.MAK is picked up
+# for a rule for .c.obj rather than the local implicit rule
+.SUFFIXES
+.SUFFIXES .c .obj
+.path.c = .
+
+{.}.c{$(OBJDIR)}.obj:
+	$(CC) $(CCARG) $(CC1) -n$(OBJDIR)\ {$< }
+
+.cpp.obj:
+	$(CC) $(CCARG) $(CC1) $(CC2)$@ $*.cpp
+
+!if ($(OSTYPE)==DOS16)
+!else # win32:
+vimmain = \
+	$(OBJDIR)\os_w32exe.obj
+!if ("$(VIMDLL)"=="yes")
+vimwinmain = \
+	$(OBJDIR)\os_w32dll.obj
+!else
+vimwinmain = \
+	$(OBJDIR)\os_w32exe.obj
+!endif
+!endif
+
+vimobj =  \
+	$(OBJDIR)\buffer.obj \
+	$(OBJDIR)\charset.obj \
+	$(OBJDIR)\diff.obj \
+	$(OBJDIR)\digraph.obj \
+	$(OBJDIR)\edit.obj \
+	$(OBJDIR)\eval.obj \
+	$(OBJDIR)\ex_cmds.obj \
+	$(OBJDIR)\ex_cmds2.obj \
+	$(OBJDIR)\ex_docmd.obj \
+	$(OBJDIR)\ex_eval.obj \
+	$(OBJDIR)\ex_getln.obj \
+	$(OBJDIR)\fileio.obj \
+	$(OBJDIR)\fold.obj \
+	$(OBJDIR)\getchar.obj \
+	$(OBJDIR)\main.obj \
+	$(OBJDIR)\mark.obj \
+	$(OBJDIR)\memfile.obj \
+	$(OBJDIR)\memline.obj \
+	$(OBJDIR)\menu.obj \
+	$(OBJDIR)\message.obj \
+	$(OBJDIR)\misc1.obj \
+	$(OBJDIR)\misc2.obj \
+	$(OBJDIR)\move.obj \
+	$(OBJDIR)\mbyte.obj \
+	$(OBJDIR)\normal.obj \
+	$(OBJDIR)\ops.obj \
+	$(OBJDIR)\option.obj \
+	$(OBJDIR)\quickfix.obj \
+	$(OBJDIR)\regexp.obj \
+	$(OBJDIR)\screen.obj \
+	$(OBJDIR)\search.obj \
+	$(OBJDIR)\syntax.obj \
+	$(OBJDIR)\tag.obj \
+	$(OBJDIR)\term.obj \
+	$(OBJDIR)\ui.obj \
+	$(OBJDIR)\undo.obj \
+	$(OBJDIR)\version.obj \
+	$(OBJDIR)\window.obj \
+	$(OBJDIR)\pathdef.obj
+
+!if ("$(OLE)"=="yes")
+vimobj = $(vimobj) \
+	$(OBJDIR)\if_ole.obj
+!endif
+
+!ifdef PERL
+vimobj = $(vimobj) \
+    $(OBJDIR)\if_perl.obj
+!endif
+
+!ifdef PYTHON
+vimobj = $(vimobj) \
+    $(OBJDIR)\if_python.obj
+!endif
+
+!ifdef RUBY
+vimobj = $(vimobj) \
+    $(OBJDIR)\if_ruby.obj
+!endif
+
+!ifdef TCL
+vimobj = $(vimobj) \
+    $(OBJDIR)\if_tcl.obj
+!endif
+
+!if ("$(CSCOPE)"=="yes")
+vimobj = $(vimobj) \
+    $(OBJDIR)\if_cscope.obj
+!endif
+
+!if ("$(NETBEANS)"=="yes")
+vimobj = $(vimobj) \
+    $(OBJDIR)\netbeans.obj $(OBJDIR)\gui_beval.obj
+!endif
+
+!ifdef XPM
+vimobj = $(vimobj) \
+    $(OBJDIR)\xpm_w32.obj
+!endif
+
+!if ("$(VIMDLL)"=="yes")
+vimdllobj = $(vimobj)
+!if ("$(DEBUG)"=="yes")
+DLLTARGET = vim32d.dll
+!else
+DLLTARGET = vim32.dll
+!endif
+!else
+DLLTARGET = joebob
+!endif
+
+!if ("$(GUI)"=="yes")
+vimobj = $(vimobj) \
+	$(vimwinmain) \
+	$(OBJDIR)\gui.obj \
+	$(OBJDIR)\gui_w32.obj
+!endif
+
+!if ($(OSTYPE)==WIN32)
+vimobj = $(vimobj) \
+	$(OBJDIR)\os_win32.obj $(OBJDIR)\os_mswin.obj
+!elif ($(OSTYPE)==DOS16)
+vimobj = $(vimobj) \
+	$(OBJDIR)\os_msdos.obj
+!endif
+# Blab what we are going to do:
+MSG = Compiling $(OSTYPE) $(TARGET) $(OLETARGET), with:
+!if ("$(GUI)"=="yes")
+MSG = $(MSG) GUI
+!endif
+!if ("$(OLE)"=="yes")
+MSG = $(MSG) OLE
+!endif
+!if ("$(USEDLL)"=="yes")
+MSG = $(MSG) USEDLL
+!endif
+!if ("$(VIMDLL)"=="yes")
+MSG = $(MSG) VIMDLL
+!endif
+!if ("$(FASTCALL)"=="yes")
+MSG = $(MSG) FASTCALL
+!endif
+!if ("$(MBYTE)"=="yes")
+MSG = $(MSG) MBYTE
+!endif
+!if ("$(IME)"=="yes")
+MSG = $(MSG) IME
+! if "$(DYNAMIC_IME)" == "yes"
+MSG = $(MSG)(dynamic)
+! endif
+!endif
+!if ("$(GETTEXT)"=="yes")
+MSG = $(MSG) GETTEXT
+!endif
+!if ("$(ICONV)"=="yes")
+MSG = $(MSG) ICONV
+!endif
+!if ("$(DEBUG)"=="yes")
+MSG = $(MSG) DEBUG
+!endif
+!if ("$(CODEGUARD)"=="yes")
+MSG = $(MSG) CODEGUARD
+!endif
+!if ("$(CSCOPE)"=="yes")
+MSG = $(MSG) CSCOPE
+!endif
+!if ("$(NETBEANS)"=="yes")
+MSG = $(MSG) NETBEANS
+!endif
+!ifdef XPM
+MSG = $(MSG) XPM
+!endif
+!ifdef PERL
+MSG = $(MSG) PERL
+! if "$(DYNAMIC_PERL)" == "yes"
+MSG = $(MSG)(dynamic)
+! endif
+!endif
+!ifdef PYTHON
+MSG = $(MSG) PYTHON
+! if "$(DYNAMIC_PYTHON)" == "yes"
+MSG = $(MSG)(dynamic)
+! endif
+!endif
+!ifdef RUBY
+MSG = $(MSG) RUBY
+! if "$(DYNAMIC_RUBY)" == "yes"
+MSG = $(MSG)(dynamic)
+! endif
+!endif
+!ifdef TCL
+MSG = $(MSG) TCL
+! if "$(DYNAMIC_TCL)" == "yes"
+MSG = $(MSG)(dynamic)
+! endif
+!endif
+MSG = $(MSG) cpu=$(CPUARG)
+MSG = $(MSG) Align=$(ALIGNARG)
+
+!message $(MSG)
+
+!if ($(OSTYPE)==DOS16)
+TARGETS = $(TARGET)
+!else
+!if ("$(VIMDLL)"=="yes")
+TARGETS = $(DLLTARGET)
+!endif
+TARGETS = $(TARGETS) $(TARGET)
+!endif
+
+# Targets:
+all: vim vimrun.exe install.exe xxd uninstal.exe GvimExt/gvimext.dll
+
+vim: $(OSTYPE) $(OBJDIR) $(OBJDIR)\bcc.cfg $(TARGETS)
+	@if exist $(OBJDIR)\version.obj del $(OBJDIR)\version.obj
+	@if exist auto\pathdef.c del auto\pathdef.c
+
+$(OSTYPE):
+	-@md $(OSTYPE)
+
+$(OBJDIR):
+	-@md $(OBJDIR)
+
+xxd:
+	@cd xxd
+	$(MAKE) /f Make_bc5.mak BOR="$(BOR)" BCC="$(CC)"
+	@cd ..
+
+GvimExt/gvimext.dll: GvimExt/gvimext.cpp GvimExt/gvimext.rc GvimExt/gvimext.h
+	cd GvimExt
+	$(MAKE) /f Make_bc5.mak USEDLL=$(USEDLL) BOR=$(BOR)
+	cd ..
+
+install.exe: dosinst.c $(OBJDIR)\bcc.cfg
+!if ($(OSTYPE)==WIN32)
+	$(CC) $(CCARG) -WC -DWIN32 -einstall dosinst.c
+!else
+	$(CC) $(CCARG) -WC -einstall dosinst.c
+!endif
+
+uninstal.exe: uninstal.c $(OBJDIR)\bcc.cfg
+!if ($(OSTYPE)==WIN32)
+	$(CC) $(CCARG) -WC -DWIN32 -O2 -euninstal uninstal.c
+!else
+	$(CC) $(CCARG) -WC -O2 -euninstal uninstal.c
+!endif
+
+clean:
+!if "$(OS)" == "Windows_NT"
+	# For Windows NT/2000, doesn't work on Windows 95/98...
+	# $(COMSPEC) needed to ensure rmdir.exe is not run
+	-@$(COMSPEC) /C rmdir /Q /S $(OBJDIR)
+!else
+	# For Windows 95/98, doesn't work on Windows NT/2000...
+	-@deltree /y $(OBJDIR)
+!endif
+	-@del *.res
+	-@del vim32*.dll
+	-@del vim32*.lib
+	-@del *vim*.exe
+	-@del *install*.exe
+	-@del *.csm
+	-@del *.map
+	-@del *.ilc
+	-@del *.ild
+	-@del *.ilf
+	-@del *.ils
+	-@del *.tds
+!ifdef PERL
+	-@del perl.lib
+!endif
+!ifdef PYTHON
+	-@del python.lib
+!endif
+!ifdef RUBY
+	-@del ruby.lib
+!endif
+!ifdef TCL
+	-@del tcl.lib
+!endif
+!ifdef XPM
+	-@del xpm.lib
+!endif
+	cd xxd
+	$(MAKE) /f Make_bc5.mak BOR="$(BOR)" clean
+	cd ..
+	cd GvimExt
+	$(MAKE) /f Make_bc5.mak BOR="$(BOR)" clean
+	cd ..
+
+$(DLLTARGET): $(OBJDIR) $(vimdllobj)
+  $(LINK) @&&|
+	$(LFLAGSDLL) +
+	c0d32.obj +
+	$(vimdllobj)
+	$<,$*
+!if ("$(CODEGUARD)"=="yes")
+	cg32.lib+
+!endif
+# $(OSTYPE)==WIN32 causes os_mswin.c compilation. FEAT_SHORTCUT in it needs OLE
+!if ("$(OLE)"=="yes" || $(OSTYPE)==WIN32)
+	ole2w32.lib +
+!endif
+!if ($(OSTYPE)==WIN32)
+	import32.lib+
+!ifdef PERL
+	$(PERL_LIB_FLAG)perl.lib+
+!endif
+!ifdef PYTHON
+	$(PYTHON_LIB_FLAG)python.lib+
+!endif
+!ifdef RUBY
+	$(RUBY_LIB_FLAG)ruby.lib+
+!endif
+!ifdef TCL
+	$(TCL_LIB_FLAG)tcl.lib+
+!endif
+!ifdef XPM
+	xpm.lib+
+!endif
+!if ("$(USEDLL)"=="yes")
+	cw32i.lib
+!else
+	cw32.lib
+!endif
+	vim.def
+!else
+	cl.lib
+!endif
+|
+
+!if ("$(VIMDLL)"=="yes")
+$(TARGET): $(OBJDIR) $(DLLTARGET) $(vimmain) $(OBJDIR)\$(RESFILE)
+!else
+$(TARGET): $(OBJDIR) $(vimobj) $(OBJDIR)\$(RESFILE)
+!endif
+  $(LINK) @&&|
+	$(LFLAGS) +
+	$(STARTUPOBJ) +
+!if ("$(VIMDLL)"=="yes")
+	$(vimmain)
+!else
+	$(vimobj)
+!endif
+	$<,$*
+!if ($(OSTYPE)==WIN32)
+!if ("$(CODEGUARD)"=="yes")
+	cg32.lib+
+!endif
+# $(OSTYPE)==WIN32 causes os_mswin.c compilation. FEAT_SHORTCUT in it needs OLE
+!if ("$(OLE)"=="yes" || $(OSTYPE)==WIN32)
+	ole2w32.lib +
+!endif
+	import32.lib+
+!ifdef PERL
+	$(PERL_LIB_FLAG)perl.lib+
+!endif
+!ifdef PYTHON
+	$(PYTHON_LIB_FLAG)python.lib+
+!endif
+!ifdef RUBY
+	$(RUBY_LIB_FLAG)ruby.lib+
+!endif
+!ifdef TCL
+	$(TCL_LIB_FLAG)tcl.lib+
+!endif
+!ifdef XPM
+	xpm.lib+
+!endif
+!if ("$(USEDLL)"=="yes")
+	cw32i.lib
+!else
+	cw32.lib
+!endif
+
+	$(OBJDIR)\$(RESFILE)
+!else
+	emu.lib + cl.lib
+!endif
+|
+
+test:
+	cd testdir
+	$(MAKE) /NOLOGO -f Make_dos.mak win32
+	cd ..
+
+$(OBJDIR)\ex_docmd.obj:  ex_docmd.c ex_cmds.h
+
+$(OBJDIR)\ex_eval.obj:  ex_eval.c ex_cmds.h
+
+$(OBJDIR)\if_ole.obj: if_ole.cpp
+
+$(OBJDIR)\if_perl.obj: if_perl.c perl.lib
+	$(CC) $(CCARG) $(CC1) $(CC2)$@ -pc if_perl.c
+
+if_perl.c: if_perl.xs typemap
+	$(PERL)\bin\perl.exe $(PERL)\lib\ExtUtils\xsubpp -prototypes -typemap \
+	    $(PERL)\lib\ExtUtils\typemap if_perl.xs > $@
+
+$(OBJDIR)\if_python.obj: if_python.c python.lib
+	$(CC) $(CCARG) $(CC1) $(CC2)$@ -pc if_python.c
+
+$(OBJDIR)\if_ruby.obj: if_ruby.c ruby.lib
+	$(CC) $(CCARG) $(CC1) $(CC2)$@ -pc if_ruby.c
+
+$(OBJDIR)\if_tcl.obj: if_tcl.c tcl.lib
+	$(CC) $(CCARG) $(CC1) $(CC2)$@ -pc if_tcl.c
+
+$(OBJDIR)\xpm_w32.obj: xpm_w32.c xpm.lib
+	$(CC) $(CCARG) $(CC1) $(CC2)$@ -pc xpm_w32.c
+
+$(OBJDIR)\netbeans.obj: netbeans.c $(NBDEBUG_DEP)
+	$(CC) $(CCARG) $(CC1) $(CC2)$@ netbeans.c
+
+$(OBJDIR)\vim.res: vim.rc version.h tools.bmp tearoff.bmp \
+		vim.ico vim_error.ico vim_alert.ico vim_info.ico vim_quest.ico
+	$(BRC) -fo$(OBJDIR)\vim.res -i $(BOR)\include -w32 -r vim.rc @&&|
+	$(DEFINES)
+|
+
+$(OBJDIR)\pathdef.obj:	auto\pathdef.c
+	$(CC) $(CCARG) $(CC1) $(CC2)$@ auto\pathdef.c
+
+
+# Need to escape both quotes and backslashes in $INTERP_DEFINES
+INTERP_DEFINES_ESC_BKS=$(INTERP_DEFINES:\=\\)
+INTERP_DEFINES_ESC=$(INTERP_DEFINES_ESC_BKS:"=\")
+
+# Note:  the silly /*"*/ below are there to trick make into accepting
+# the # character as something other than a comment without messing up
+# the preprocessor directive.
+auto\pathdef.c::
+	-@md auto
+	@echo creating auto/pathdef.c
+	@copy /y &&|
+/* pathdef.c */
+/*"*/#include "vim.h"/*"*/
+
+char_u *default_vim_dir = (char_u *)"$(VIMRCLOC:\=\\)";
+char_u *default_vimruntime_dir = (char_u *)"$(VIMRUNTIMEDIR:\=\\)";
+char_u *all_cflags = (char_u *)"$(CC:\=\\) $(CFLAGS:\=\\) $(DEFINES) $(MBDEFINES) $(INTERP_DEFINES_ESC) $(OPT) $(EXETYPE) $(CPUARG) $(ALIGNARG) $(DEBUG_FLAG) $(CODEGUARD_FLAG)";
+char_u *all_lflags = (char_u *)"$(LINK:\=\\) $(LFLAGS:\=\\)";
+char_u *compiled_user = (char_u *)"$(USERNAME)";
+char_u *compiled_sys = (char_u *)"$(USERDOMAIN)";
+| auto\pathdef.c
+
+perl.lib: $(PERL)\lib\CORE\perl$(PERL_VER).lib
+	coff2omf $(PERL)\lib\CORE\perl$(PERL_VER).lib $@
+
+python.lib: $(PYTHON)\libs\python$(PYTHON_VER).lib
+	coff2omf $(PYTHON)\libs\python$(PYTHON_VER).lib $@
+
+ruby.lib: $(RUBY)\lib\$(RUBY_INSTALL_NAME).lib
+	coff2omf $(RUBY)\lib\$(RUBY_INSTALL_NAME).lib $@
+
+# For some reason, the coff2omf method doesn't work on libXpm.lib, so
+# we have to manually generate an import library straight from the DLL.
+xpm.lib: $(XPM)\lib\libXpm.lib
+	implib -a $@ $(XPM)\bin\libXpm.dll
+
+tcl.lib: $(TCL_LIB)
+!if ("$(DYNAMIC_TCL)" == "yes")
+	copy $(TCL_LIB) $@
+!else
+	coff2omf $(TCL_LIB) $@
+!endif
+
+!if ("$(DYNAMIC_TCL)" == "yes")
+tclstub$(TCL_VER)-bor.lib:
+	-@IF NOT EXIST $@ ECHO You must download tclstub$(TCL_VER)-bor.lib separately and\
+	place it in the src directory in order to compile a dynamic TCL-enabled\
+	(g)vim with the Borland compiler.  You can get the tclstub$(TCL_VER)-bor.lib file\
+	at http://mywebpage.netscape.com/sharppeople/vim/tclstub$(TCL_VER)-bor.lib
+!endif
+
+# vimrun.exe:
+vimrun.exe: vimrun.c
+!if ("$(USEDLL)"=="yes")
+	$(CC) -WC -O1 -I$(INCLUDE) -L$(LIB) -D_RTLDLL vimrun.c cw32mti.lib
+!else
+	$(CC) -WC -O1 -I$(INCLUDE) -L$(LIB) vimrun.c
+!endif
+
+# The dependency on $(OBJDIR) is to have bcc.cfg generated each time.
+$(OBJDIR)\bcc.cfg: Make_bc5.mak $(OBJDIR)
+  copy /y &&|
+	$(CFLAGS)
+	-L$(LIB)
+	$(DEFINES)
+	$(MBDEFINES)
+	$(INTERP_DEFINES)
+	$(EXETYPE)
+	$(DEBUG_FLAG)
+	$(OPT)
+	$(CODEGUARD_FLAG)
+	$(CPUARG)
+	$(ALIGNARG)
+| $@
+
+# vi:set sts=4 sw=4: