updated for version 7.0001
diff --git a/runtime/indent/ada.vim b/runtime/indent/ada.vim
new file mode 100644
index 0000000..72e2e80
--- /dev/null
+++ b/runtime/indent/ada.vim
@@ -0,0 +1,264 @@
+" Vim indent file
+" Language:	Ada
+" Maintainer:	Neil Bird <neil@fnxweb.com>
+" Last Change:	2003 May 20
+" Version:	$Id$
+" Look for the latest version at http://vim.sourceforge.net/
+"
+" ToDo:
+"  Verify handling of multi-line exprs. and recovery upon the final ';'.
+"  Correctly find comments given '"' and "" ==> " syntax.
+"  Combine the two large block-indent functions into one?
+
+" Only load this indent file when no other was loaded.
+if exists("b:did_indent")
+   finish
+endif
+let b:did_indent = 1
+
+setlocal indentexpr=GetAdaIndent()
+setlocal indentkeys-=0{,0}
+setlocal indentkeys+=0=~then,0=~end,0=~elsif,0=~when,0=~exception,0=~begin,0=~is,0=~record
+
+" Only define the functions once.
+if exists("*GetAdaIndent")
+   finish
+endif
+
+let s:AdaBlockStart = '^\s*\(if\>\|while\>\|else\>\|elsif\>\|loop\>\|for\>.*\<loop\>\|declare\>\|begin\>\|type\>.*\<is\s*$\|\(type\>.*\)\=\<record\>\|procedure\>\|function\>\|accept\>\|do\>\|task\>\|package\>\|then\>\|when\>\|is\>\)'
+let s:AdaComment = "\\v^(\"[^\"]*\"|'.'|[^\"']){-}\\zs\\s*--.*"
+
+
+" Try to find indent of the block we're in (and about to complete)
+" prev_indent = the previous line's indent
+" prev_lnum   = previous line (to start looking on)
+" blockstart  = expr. that indicates a possible start of this block
+" stop_at     = if non-null, if a matching line is found, gives up!
+" No recursive previous block analysis: simply look for a valid line
+" with a lesser or equal indent than we currently (on prev_lnum) have.
+" This shouldn't work as well as it appears to with lines that are currently
+" nowhere near the correct indent (e.g., start of line)!
+" Seems to work OK as it 'starts' with the indent of the /previous/ line.
+function s:MainBlockIndent( prev_indent, prev_lnum, blockstart, stop_at )
+   let lnum = a:prev_lnum
+   let line = substitute( getline(lnum), s:AdaComment, '', '' )
+   while lnum > 1
+      if a:stop_at != ''  &&  line =~ '^\s*' . a:stop_at  &&  indent(lnum) < a:prev_indent
+         return -1
+      elseif line =~ '^\s*' . a:blockstart
+         let ind = indent(lnum)
+         if ind < a:prev_indent
+            return ind
+         endif
+      endif
+
+      let lnum = prevnonblank(lnum - 1)
+      " Get previous non-blank/non-comment-only line
+      while 1
+         let line = substitute( getline(lnum), s:AdaComment, '', '' )
+         if line !~ '^\s*$' && line !~ '^\s*#'
+            break
+         endif
+         let lnum = prevnonblank(lnum - 1)
+         if lnum <= 0
+            return a:prev_indent
+         endif
+      endwhile
+   endwhile
+   " Fallback - just move back one
+   return a:prev_indent - &sw
+endfunction
+
+" Try to find indent of the block we're in (and about to complete),
+" including handling of nested blocks. Works on the 'end' of a block.
+" prev_indent = the previous line's indent
+" prev_lnum   = previous line (to start looking on)
+" blockstart  = expr. that indicates a possible start of this block
+" blockend    = expr. that indicates a possible end of this block
+function s:EndBlockIndent( prev_indent, prev_lnum, blockstart, blockend )
+   let lnum = a:prev_lnum
+   let line = getline(lnum)
+   let ends = 0
+   while lnum > 1
+      if getline(lnum) =~ '^\s*' . a:blockstart
+	 let ind = indent(lnum)
+         if ends <= 0
+            if ind < a:prev_indent
+	       return ind
+            endif
+         else
+            let ends = ends - 1
+	 endif
+      elseif getline(lnum) =~ '^\s*' . a:blockend
+         let ends = ends + 1
+      endif
+
+      let lnum = prevnonblank(lnum - 1)
+      " Get previous non-blank/non-comment-only line
+      while 1
+	 let line = getline(lnum)
+	 let line = substitute( line, s:AdaComment, '', '' )
+	 if line !~ '^\s*$'
+	    break
+	 endif
+	 let lnum = prevnonblank(lnum - 1)
+	 if lnum <= 0
+	    return a:prev_indent
+	 endif
+      endwhile
+   endwhile
+   " Fallback - just move back one
+   return a:prev_indent - &sw
+endfunction
+
+" As per MainBlockIndent, but return indent of previous statement-start
+" (after we've indented due to multi-line statements).
+" This time, we start searching on the line *before* the one given (which is
+" the end of a statement - we want the previous beginning).
+function s:StatementIndent( current_indent, prev_lnum )
+   let lnum  = a:prev_lnum
+   while lnum > 0
+      let prev_lnum = lnum
+      let lnum = prevnonblank(lnum - 1)
+      " Get previous non-blank/non-comment-only line
+      while 1
+         let line = substitute( getline(lnum), s:AdaComment, '', '' )
+         if line !~ '^\s*$' && line !~ '^\s*#'
+            break
+         endif
+         let lnum = prevnonblank(lnum - 1)
+         if lnum <= 0
+            return a:current_indent
+         endif
+      endwhile
+      " Leave indent alone if our ';' line is part of a ';'-delineated
+      " aggregate (e.g., procedure args.) or first line after a block start.
+      if line =~ s:AdaBlockStart || line =~ '(\s*$'
+         return a:current_indent
+      endif
+      if line !~ '[.=(]\s*$'
+         let ind = indent(prev_lnum)
+         if ind < a:current_indent
+            return ind
+         endif
+      endif
+   endwhile
+   " Fallback - just use current one
+   return a:current_indent
+endfunction
+
+
+" Find correct indent of a new line based upon what went before
+function GetAdaIndent()
+   " Find a non-blank line above the current line.
+   let lnum = prevnonblank(v:lnum - 1)
+   let ind = indent(lnum)
+   let package_line = 0
+
+   " Get previous non-blank/non-comment-only/non-cpp line
+   while 1
+      let line = substitute( getline(lnum), s:AdaComment, '', '' )
+      if line !~ '^\s*$' && line !~ '^\s*#'
+         break
+      endif
+      let lnum = prevnonblank(lnum - 1)
+      if lnum <= 0
+         return ind
+      endif
+   endwhile
+
+   " Get default indent (from prev. line)
+   let ind = indent(lnum)
+
+   " Now check what's on the previous line
+   if line =~ s:AdaBlockStart  ||  line =~ '(\s*$'
+      " Check for false matches to AdaBlockStart
+      let false_match = 0
+      if line =~ '^\s*\(procedure\|function\|package\)\>.*\<is\s*new\>'
+         " Generic instantiation
+         let false_match = 1
+      elseif line =~ ')\s*;\s*$'  ||  line =~ '^\([^(]*([^)]*)\)*[^(]*;\s*$'
+         " forward declaration
+         let false_match = 1
+      endif
+      " Move indent in
+      if ! false_match
+         let ind = ind + &sw
+      endif
+   elseif line =~ '^\s*\(case\|exception\)\>'
+      " Move indent in twice (next 'when' will move back)
+      let ind = ind + 2 * &sw
+   elseif line =~ '^\s*end\s*record\>'
+      " Move indent back to tallying 'type' preceeding the 'record'.
+      " Allow indent to be equal to 'end record's.
+      let ind = s:MainBlockIndent( ind+&sw, lnum, 'type\>', '' )
+   elseif line =~ '\(^\s*new\>.*\)\@<!)\s*[;,]\s*$'
+      " Revert to indent of line that started this parenthesis pair
+      exe lnum
+      exe 'normal! $F)%'
+      if getline('.') =~ '^\s*('
+         " Dire layout - use previous indent (could check for AdaComment here)
+         let ind = indent( prevnonblank( line('.')-1 ) )
+      else
+         let ind = indent('.')
+      endif
+      exe v:lnum
+   elseif line =~ '[.=(]\s*$'
+      " A statement continuation - move in one
+      let ind = ind + &sw
+   elseif line =~ '^\s*new\>'
+      " Multiple line generic instantiation ('package blah is\nnew thingy')
+      let ind = s:StatementIndent( ind - &sw, lnum )
+   elseif line =~ ';\s*$'
+      " Statement end - try to find current statement-start indent
+      let ind = s:StatementIndent( ind, lnum )
+   endif
+
+   " Check for potential argument list on next line
+   let continuation = (line =~ '[A-Za-z0-9_]\s*$')
+
+
+   " Check current line; search for simplistic matching start-of-block
+   let line = getline(v:lnum)
+   if line =~ '^\s*#'
+      " Start of line for ada-pp
+      let ind = 0
+   elseif continuation && line =~ '^\s*('
+      let ind = ind + &sw
+   elseif line =~ '^\s*\(begin\|is\)\>'
+      let ind = s:MainBlockIndent( ind, lnum, '\(procedure\|function\|declare\|package\|task\)\>', 'begin\>' )
+   elseif line =~ '^\s*record\>'
+      let ind = s:MainBlockIndent( ind, lnum, 'type\>', '' ) + &sw
+   elseif line =~ '^\s*\(else\|elsif\)\>'
+      let ind = s:MainBlockIndent( ind, lnum, 'if\>', '' )
+   elseif line =~ '^\s*when\>'
+      " Align 'when' one /in/ from matching block start
+      let ind = s:MainBlockIndent( ind, lnum, '\(case\|exception\)\>', '' ) + &sw
+   elseif line =~ '^\s*end\>\s*\<if\>'
+      " End of if statements
+      let ind = s:EndBlockIndent( ind, lnum, 'if\>', 'end\>\s*\<if\>' )
+   elseif line =~ '^\s*end\>\s*\<loop\>'
+      " End of loops
+      let ind = s:EndBlockIndent( ind, lnum, '\(\(while\|for\)\>.*\)\?\<loop\>', 'end\>\s*\<loop\>' )
+   elseif line =~ '^\s*end\>\s*\<record\>'
+      " End of records
+      let ind = s:EndBlockIndent( ind, lnum, '\(type\>.*\)\=\<record\>', 'end\>\s*\<record\>' )
+   elseif line =~ '^\s*end\>\s*\<procedure\>'
+      " End of procedures
+      let ind = s:EndBlockIndent( ind, lnum, 'procedure\>.*\<is\>', 'end\>\s*\<procedure\>' )
+   elseif line =~ '^\s*end\>\s*\<case\>'
+      " End of case statement
+      let ind = s:EndBlockIndent( ind, lnum, 'case\>.*\<is\>', 'end\>\s*\<case\>' )
+   elseif line =~ '^\s*end\>'
+      " General case for end
+      let ind = s:MainBlockIndent( ind, lnum, '\(if\|while\|for\|loop\|accept\|begin\|record\|case\|exception\)\>', '' )
+   elseif line =~ '^\s*exception\>'
+      let ind = s:MainBlockIndent( ind, lnum, 'begin\>', '' )
+   elseif line =~ '^\s*then\>'
+      let ind = s:MainBlockIndent( ind, lnum, 'if\>', '' )
+   endif
+
+   return ind
+endfunction
+
+" vim: set sw=3 sts=3 :