diff --git a/runtime/doc/usr_27.txt b/runtime/doc/usr_27.txt
new file mode 100644
index 0000000..46fb190
--- /dev/null
+++ b/runtime/doc/usr_27.txt
@@ -0,0 +1,563 @@
+*usr_27.txt*	For Vim version 7.0aa.  Last change: 2003 Oct 28
+
+		     VIM USER MANUAL - by Bram Moolenaar
+
+			 Search commands and patterns
+
+
+In chapter 3 a few simple search patterns were mentioned |03.9|.  Vim can do
+much more complex searches.  This chapter explains the most often used ones.
+A detailed specification can be found here: |pattern|
+
+|27.1|	Ignoring case
+|27.2|	Wrapping around the file end
+|27.3|	Offsets
+|27.4|	Matching multiple times
+|27.5|	Alternatives
+|27.6|	Character ranges
+|27.7|	Character classes
+|27.8|	Matching a line break
+|27.9|	Examples
+
+     Next chapter: |usr_28.txt|  Folding
+ Previous chapter: |usr_26.txt|  Repeating
+Table of contents: |usr_toc.txt|
+
+==============================================================================
+*27.1*	Ignoring case
+
+By default, Vim's searches are case sensitive.  Therefore, "include",
+"INCLUDE", and "Include" are three different words and a search will match
+only one of them.
+   Now switch on the 'ignorecase' option: >
+
+	:set ignorecase
+
+Search for "include" again, and now it will match "Include", "INCLUDE" and
+"InClUDe".  (Set the 'hlsearch' option to quickly see where a pattern
+matches.)
+   You can switch this off again with: >
+
+	:set noignorecase
+
+But lets keep it set, and search for "INCLUDE".  It will match exactly the
+same text as "include" did.  Now set the 'smartcase' option: >
+
+	:set ignorecase smartcase
+
+If you have a pattern with at least one uppercase character, the search
+becomes case sensitive.  The idea is that you didn't have to type that
+uppercase character, so you must have done it because you wanted case to
+match.  That's smart!
+    With these two options set you find the following matches:
+
+	pattern			matches	~
+	word			word, Word, WORD, WoRd, etc.
+	Word			Word
+	WORD			WORD
+	WoRd			WoRd
+
+
+CASE IN ONE PATTERN
+
+If you want to ignore case for one specific pattern, you can do this by
+prepending the "\c" string.  Using "\C" will make the pattern to match case.
+This overrules the 'ignorecase' and 'smartcase' options, when "\c" or "\C" is
+used their value doesn't matter.
+
+	pattern			matches	~
+	\Cword			word
+	\CWord			Word
+	\cword			word, Word, WORD, WoRd, etc.
+	\cWord			word, Word, WORD, WoRd, etc.
+
+A big advantage of using "\c" and "\C" is that it sticks with the pattern.
+Thus if you repeat a pattern from the search history, the same will happen, no
+matter if 'ignorecase' or 'smartcase' was changed.
+
+	Note:
+	The use of "\" items in search patterns depends on the 'magic' option.
+	In this chapters we will assume 'magic' is on, because that is the
+	standard and recommended setting.  If you would change 'magic', many
+	search patterns would suddenly become invalid.
+
+	Note:
+	If your search takes much longer than you expected, you can interrupt
+	it with CTRL-C on Unix and  CTRL-Break on MS-DOS and MS-Windows.
+
+==============================================================================
+*27.2*	Wrapping around the file end
+
+By default, a forward search starts searching for the given string at the
+current cursor location.  It then proceeds to the end of the file.  If it has
+not found the string by that time, it starts from the beginning and searches
+from the start of the file to the cursor location.
+   Keep in mind that when repeating the "n" command to search for the next
+match, you eventually get back to the first match.  If you don't notice this
+you keep searching forever!  To give you a hint, Vim displays this message:
+
+	search hit BOTTOM, continuing at TOP ~
+
+If you use the "?" command, to search in the other direction, you get this
+message:
+
+	search hit TOP, continuing at BOTTOM ~
+
+Still, you don't know when you are back at the first match.  One way to see
+this is by switching on the 'ruler' option: >
+
+	:set ruler
+
+Vim will display the cursor position in the lower righthand corner of the
+window (in the status line if there is one).  It looks like this:
+
+	101,29       84% ~
+
+The first number is the line number of the cursor.  Remember the line number
+where you started, so that you can check if you passed this position again.
+
+
+NOT WRAPPING
+
+To turn off search wrapping, use the following command: >
+
+	:set nowrapscan
+
+Now when the search hits the end of the file, an error message displays:
+
+	E385: search hit BOTTOM without match for: forever ~
+
+Thus you can find all matches by going to the start of the file with "gg" and
+keep searching until you see this message.
+   If you search in the other direction, using "?", you get:
+
+	E384: search hit TOP without match for: forever ~
+
+==============================================================================
+*27.3*	Offsets
+
+By default, the search command leaves the cursor positioned on the beginning
+of the pattern.  You can tell Vim to leave it some other place by specifying
+an offset.  For the forward search command "/", the offset is specified by
+appending a slash (/) and the offset: >
+
+	/default/2
+
+This command searches for the pattern "default" and then moves to the
+beginning of the second line past the pattern.  Using this command on the
+paragraph above, Vim finds the word "default" in the first line.  Then the
+cursor is moved two lines down and lands on "an offset".
+
+If the offset is a simple number, the cursor will be placed at the beginning
+of the line that many lines from the match.  The offset number can be positive
+or negative.  If it is positive, the cursor moves down that many lines; if
+negative, it moves up.
+
+
+CHARACTER OFFSETS
+
+The "e" offset indicates an offset from the end of the match.  It moves the
+cursor onto the last character of the match.  The command: >
+
+	/const/e
+
+puts the cursor on the "t" of "const".
+   From that position, adding a number moves forward that many characters.
+This command moves to the character just after the match: >
+
+	/const/e+1
+
+A positive number moves the cursor to the right, a negative number moves it to
+the left.  For example: >
+
+	/const/e-1
+
+moves the cursor to the "s" of "const".
+
+If the offset begins with "b", the cursor moves to the beginning of the
+pattern.  That's not very useful, since leaving out the "b" does the same
+thing.  It does get useful when a number is added or subtracted.  The cursor
+then goes forward or backward that many characters.  For example: >
+
+	/const/b+2
+
+Moves the cursor to the beginning of the match and then two characters to the
+right.  Thus it lands on the "n".
+
+
+REPEATING
+
+To repeat searching for the previously used search pattern, but with a
+different offset, leave out the pattern: >
+
+	/that
+	//e
+
+Is equal to: >
+
+	/that/e
+
+To repeat with the same offset: >
+
+	/
+
+"n" does the same thing.  To repeat while removing a previously used offset: >
+
+	//
+
+
+SEARCHING BACKWARDS
+
+The "?" command uses offsets in the same way, but you must use "?" to separate
+the offset from the pattern, instead of "/": >
+
+	?const?e-2
+
+The "b" and "e" keep their meaning, they don't change direction with the use
+of "?".
+
+
+START POSITION
+
+When starting a search, it normally starts at the cursor position.  When you
+specify a line offset, this can cause trouble.  For example: >
+
+	/const/-2
+
+This finds the next word "const" and then moves two lines up.  If you
+use "n" to search again, Vim could start at the current position and find the same
+"const" match.  Then using the offset again, you would be back where you started.
+You would be stuck!
+   It could be worse: Suppose there is another match with "const" in the next
+line.  Then repeating the forward search would find this match and move two
+lines up.  Thus you would actually move the cursor back!
+
+When you specify a character offset, Vim will compensate for this.  Thus the
+search starts a few characters forward or backward, so that the same match
+isn't found again.
+
+==============================================================================
+*27.4*	Matching multiple times
+
+The "*" item specifies that the item before it can match any number of times.
+Thus: >
+
+	/a*
+
+matches "a", "aa", "aaa", etc.  But also "" (the empty string), because zero
+times is included.
+   The "*" only applies to the item directly before it.  Thus "ab*" matches
+"a", "ab", "abb", "abbb", etc.  To match a whole string multiple times, it
+must be grouped into one item.  This is done by putting "\(" before it and
+"\)" after it.  Thus this command: >
+
+	/\(ab\)*
+
+Matches: "ab", "abab", "ababab", etc.  And also "".
+
+To avoid matching the empty string, use "\+".  This makes the previous item
+match one or more times. >
+
+	/ab\+
+
+Matches "ab", "abb", "abbb", etc.  It does not match "a" when no "b" follows.
+
+To match an optional item, use "\=".  Example: >
+
+	/folders\=
+
+Matches "folder" and "folders".
+
+
+SPECIFIC COUNTS
+
+To match a specific number of items use the form "\{n,m}".  "n" and "m" are
+numbers.  The item before it will be matched "n" to "m" times |inclusive|.
+Example: >
+
+	/ab\{3,5}
+
+matches "abbb", "abbbb" and "abbbbb".
+  When "n" is omitted, it defaults to zero.  When "m" is omitted it defaults
+to infinity.  When ",m" is omitted, it matches exactly "n" times.
+Examples:
+
+	pattern		match count ~
+	\{,4}		0, 1, 2, 3 or 4
+	\{3,}		3, 4, 5, etc.
+	\{0,1}		0 or 1, same as \=
+	\{0,}		0 or more, same as *
+	\{1,}		1 or more, same as \+
+	\{3}		3
+
+
+MATCHING AS LITTLE AS POSSIBLE
+
+The items so far match as many characters as they can find.  To match as few
+as possible, use "\{-n,m}".  It works the same as "\{n,m}", except that the
+minimal amount possible is used.
+   For example, use: >
+
+	/ab\{-1,3}
+
+Will match "ab" in "abbb".  Actually, it will never match more than one b,
+because there is no reason to match more.  It requires something else to force
+it to match more than the lower limit.
+   The same rules apply to removing "n" and "m".  It's even possible to remove
+both of the, resulting in "\{-}".  This matches the item before it zero or
+more times, as few as possible.  The item by itself always match zero times.
+It is useful when combined with something else.  Example: >
+
+	/a.\{-}b
+
+This matches "axb" in "axbxb".  If this pattern would be used: >
+
+	/a.*b
+
+It would try to match as many characters as possible with ".*", thus it
+matches "axbxb" as a whole.
+
+==============================================================================
+*27.5*	Alternatives
+
+The "or" operator in a pattern is "\|".  Example: >
+
+	/foo\|bar
+
+This matches "foo" or "bar".  More alternatives can be concatenated: >
+
+	/one\|two\|three
+
+Matches "one", "two" and "three".
+   To match multiple times, the whole thing must be placed in "\(" and "\)": >
+
+	/\(foo\|bar\)\+
+
+This matches "foo", "foobar", "foofoo", "barfoobar", etc.
+   Another example: >
+
+	/end\(if\|while\|for\)
+
+This matches "endif", "endwhile" and "endfor".
+
+A related item is "\&".  This requires that both alternatives match in the
+same place.  The resulting match uses the last alternative.  Example: >
+
+	/forever\&...
+
+This matches "for" in "forever".  It will not match "fortuin", for example.
+
+==============================================================================
+*27.6*	Character ranges
+
+To match "a", "b" or "c" you could use "/a\|b\|c".  When you want to match all
+letters from "a" to "z" this gets very long.  There is a shorter method: >
+
+	/[a-z]
+
+The [] construct matches a single character.  Inside you specify which
+characters to match.  You can include a list of characters, like this: >
+
+	/[0123456789abcdef]
+
+This will match any of the characters included.  For consecutive characters
+you can specify the range.  "0-3" stands for "0123".  "w-z" stands for "wxyz".
+Thus the same command as above can be shortened to: >
+
+	/[0-9a-f]
+
+To match the "-" character itself make it the first or last one in the range.
+These special characters are accepted to make it easier to use them inside a
+[] range (they can actually be used anywhere in the search pattern):
+
+	\e	<Esc>
+	\t	<Tab>
+	\r	<CR>
+	\b	<BS>
+
+There are a few more special cases for [] ranges, see |/[]| for the whole
+story.
+
+
+COMPLEMENTED RANGE
+
+To avoid matching a specific character, use "^" at the start of the range.
+The [] item then matches everything but the characters included.  Example: >
+
+	/"[^"]*"
+<
+	 "	  a double quote
+	  [^"]	  any character that is not a double quote
+	      *	  as many as possible
+	       "  a double quote again
+
+This matches "foo" and "3!x", including the double quotes.
+
+
+PREDEFINED RANGES
+
+A number of ranges are used very often.  Vim provides a shortcut for these.
+For example: >
+
+	/\a
+
+Finds alphabetic characters.  This is equal to using "/[a-zA-Z]".  Here are a
+few more of these:
+
+	item	matches			equivalent ~
+	\d	digit			[0-9]
+	\D	non-digit		[^0-9]
+	\x	hex digit		[0-9a-fA-F]
+	\X	non-hex digit		[^0-9a-fA-F]
+	\s	white space		[ 	]     (<Tab> and <Space>)
+	\S	non-white characters	[^ 	]     (not <Tab> and <Space>)
+	\l	lowercase alpha		[a-z]
+	\L	non-lowercase alpha	[^a-z]
+	\u	uppercase alpha		[A-Z]
+	\U	non-uppercase alpha	[^A-Z]
+
+	Note:
+	Using these predefined ranges works a lot faster than the character
+	range it stands for.
+	These items can not be used inside [].  Thus "[\d\l]" does NOT work to
+	match a digit or lowercase alpha.  Use "\(\d\|\l\)" instead.
+
+See |/\s| for the whole list of these ranges.
+
+==============================================================================
+*27.7*	Character classes
+
+The character range matches a fixed set of characters.  A character class is
+similar, but with an essential difference: The set of characters can be
+redefined without changing the search pattern.
+   For example, search for this pattern: >
+
+	/\f\+
+
+The "\f" items stands for file name characters.  Thus this matches a sequence
+of characters that can be a file name.
+   Which characters can be part of a file name depends on the system you are
+using.  On MS-Windows, the backslash is included, on Unix it is not.  This is
+specified with the 'isfname' option.  The default value for Unix is: >
+
+	:set isfname
+	isfname=@,48-57,/,.,-,_,+,,,#,$,%,~,=
+
+For other systems the default value is different.  Thus you can make a search
+pattern with "\f" to match a file name, and it will automatically adjust to
+the system you are using it on.
+
+	Note:
+	Actually, Unix allows using just about any character in a file name,
+	including white space.  Including these characters in 'isfname' would
+	be theoretically correct.  But it would make it impossible to find the
+	end of a file name in text.  Thus the default value of 'isfname' is a
+	compromise.
+
+The character classes are:
+
+	item	matches				option ~
+	\i	identifier characters		'isident'
+	\I	like \i, excluding digits
+	\k	keyword characters		'iskeyword'
+	\K	like \k, excluding digits
+	\p	printable characters		'isprint'
+	\P	like \p, excluding digits
+	\f	file name characters		'isfname'
+	\F	like \f, excluding digits
+
+==============================================================================
+*27.8*	Matching a line break
+
+Vim can find a pattern that includes a line break.  You need to specify where
+the line break happens, because all items mentioned so far don't match a line
+break.
+   To check for a line break in a specific place, use the "\n" item: >
+
+	/the\nword
+
+This will match at a line that ends in "the" and the next line starts with
+"word".  To match "the word" as well, you need to match a space or a line
+break.  The item to use for it is "\_s": >
+
+	/the\_sword
+
+To allow any amount of white space: >
+
+	/the\_s\+word
+
+This also matches when "the  " is at the end of a line and "   word" at the
+start of the next one.
+
+"\s" matches white space, "\_s" matches white space or a line break.
+Similarly, "\a" matches an alphabetic character, and "\_a" matches an
+alphabetic character or a line break.  The other character classes and ranges
+can be modified in the same way by inserting a "_".
+
+Many other items can be made to match a line break by prepending "\_".  For
+example: "\_." matches any character or a line break.
+
+	Note:
+	"\_.*" matches everything until the end of the file.  Be careful with
+	this, it can make a search command very slow.
+
+Another example is "\_[]", a character range that includes a line break: >
+
+	/"\_[^"]*"
+
+This finds a text in double quotes that may be split up in several lines.
+
+==============================================================================
+*27.9*	Examples
+
+Here are a few search patterns you might find useful.  This shows how the
+items mentioned above can be combined.
+
+
+FINDING A CALIFORNIA LICENSE PLATE
+
+A sample license place number is "1MGU103".  It has one digit, three uppercase
+letters and three digits.  Directly putting this into a search pattern: >
+
+	/\d\u\u\u\d\d\d
+
+Another way is to specify that there are three digits and letters with a
+count: >
+
+	/\d\u\{3}\d\{3}
+
+Using [] ranges instead: >
+
+	/[0-9][A-Z]\{3}[0-9]\{3}
+
+Which one of these you should use?  Whichever one you can remember.  The
+simple way you can remember is much faster than the fancy way that you can't.
+If you can remember them all, then avoid the last one, because it's both more
+typing and slower to execute.
+
+
+FINDING AN IDENTIFIER
+
+In C programs (and many other computer languages) an identifier starts with a
+letter and further consists of letters and digits.  Underscores can be used
+too.  This can be found with: >
+
+	/\<\h\w*\>
+
+"\<" and "\>" are used to find only whole words.  "\h" stands for "[A-Za-z_]"
+and "\w" for "[0-9A-Za-z_]".
+
+	Note:
+	"\<" and "\>" depend on the 'iskeyword' option.  If it includes "-",
+	for example, then "ident-" is not matched.  In this situation use: >
+
+		/\w\@<!\h\w*\w\@!
+<
+	This checks if "\w" does not match before or after the identifier.
+	See |/\@<!| and |/\@!|.
+
+==============================================================================
+
+Next chapter: |usr_28.txt|  Folding
+
+Copyright: see |manual-copyright|  vim:tw=78:ts=8:ft=help:norl: