diff --git a/common/jpeg/Makefile.am b/common/jpeg/Makefile.am
index 5adc130..57081f7 100644
--- a/common/jpeg/Makefile.am
+++ b/common/jpeg/Makefile.am
@@ -22,7 +22,7 @@
 
 TSTHDRS = turbojpeg.h rrutil.h rrtimer.h
 
-noinst_PROGRAMS = jpgtest jpegut
+noinst_PROGRAMS = jpgtest jpegut cjpeg djpeg
 
 jpgtest_SOURCES = $(TSTHDRS) jpgtest.cxx bmp.c turbojpegl.c
 
@@ -31,3 +31,19 @@
 jpegut_SOURCES = $(TSTHDRS) jpegut.c bmp.c turbojpegl.c
 
 jpegut_LDADD = $(top_srcdir)/libjpeg.la
+
+cjpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c cjpeg.c rdbmp.c rdgif.c \
+	rdppm.c rdswitch.c rdtarga.c 
+
+cjpeg_LDADD = $(top_srcdir)/libjpeg.la
+
+cjpeg_CFLAGS = -DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED \
+	-DTARGA_SUPPORTED
+
+djpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c djpeg.c rdcolmap.c rdswitch.c \
+	wrbmp.c wrgif.c wrppm.c wrtarga.c
+
+djpeg_LDADD = $(top_srcdir)/libjpeg.la
+
+djpeg_CFLAGS = -DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED \
+	-DTARGA_SUPPORTED
diff --git a/common/jpeg/cderror.h b/common/jpeg/cderror.h
new file mode 100644
index 0000000..70435e1
--- /dev/null
+++ b/common/jpeg/cderror.h
@@ -0,0 +1,132 @@
+/*
+ * cderror.h
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file defines the error and message codes for the cjpeg/djpeg
+ * applications.  These strings are not needed as part of the JPEG library
+ * proper.
+ * Edit this file to add new codes, or to translate the message strings to
+ * some other language.
+ */
+
+/*
+ * To define the enum list of message codes, include this file without
+ * defining macro JMESSAGE.  To create a message string table, include it
+ * again with a suitable JMESSAGE definition (see jerror.c for an example).
+ */
+#ifndef JMESSAGE
+#ifndef CDERROR_H
+#define CDERROR_H
+/* First time through, define the enum list */
+#define JMAKE_ENUM_LIST
+#else
+/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */
+#define JMESSAGE(code,string)
+#endif /* CDERROR_H */
+#endif /* JMESSAGE */
+
+#ifdef JMAKE_ENUM_LIST
+
+typedef enum {
+
+#define JMESSAGE(code,string)	code ,
+
+#endif /* JMAKE_ENUM_LIST */
+
+JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */
+
+#ifdef BMP_SUPPORTED
+JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format")
+JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported")
+JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
+JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
+JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
+JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
+JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
+JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
+JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")
+JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image")
+JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image")
+#endif /* BMP_SUPPORTED */
+
+#ifdef GIF_SUPPORTED
+JMESSAGE(JERR_GIF_BUG, "GIF output got confused")
+JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d")
+JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB")
+JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file")
+JMESSAGE(JERR_GIF_NOT, "Not a GIF file")
+JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image")
+JMESSAGE(JTRC_GIF_BADVERSION,
+	 "Warning: unexpected GIF version number '%c%c%c'")
+JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x")
+JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input")
+JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file")
+JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring")
+JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image")
+JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
+#endif /* GIF_SUPPORTED */
+
+#ifdef PPM_SUPPORTED
+JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
+JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
+JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
+JMESSAGE(JTRC_PGM, "%ux%u PGM image")
+JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
+JMESSAGE(JTRC_PPM, "%ux%u PPM image")
+JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image")
+#endif /* PPM_SUPPORTED */
+
+#ifdef RLE_SUPPORTED
+JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library")
+JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB")
+JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE")
+JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file")
+JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header")
+JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header")
+JMESSAGE(JERR_RLE_NOT, "Not an RLE file")
+JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE")
+JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup")
+JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file")
+JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d")
+JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file")
+JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d")
+JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d")
+#endif /* RLE_SUPPORTED */
+
+#ifdef TARGA_SUPPORTED
+JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format")
+JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file")
+JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB")
+JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image")
+JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image")
+JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image")
+#else
+JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled")
+#endif /* TARGA_SUPPORTED */
+
+JMESSAGE(JERR_BAD_CMAP_FILE,
+	 "Color map file is invalid or of unsupported format")
+JMESSAGE(JERR_TOO_MANY_COLORS,
+	 "Output file format cannot handle %d colormap entries")
+JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed")
+#ifdef TARGA_SUPPORTED
+JMESSAGE(JERR_UNKNOWN_FORMAT,
+	 "Unrecognized input file format --- perhaps you need -targa")
+#else
+JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format")
+#endif
+JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format")
+
+#ifdef JMAKE_ENUM_LIST
+
+  JMSG_LASTADDONCODE
+} ADDON_MESSAGE_CODE;
+
+#undef JMAKE_ENUM_LIST
+#endif /* JMAKE_ENUM_LIST */
+
+/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */
+#undef JMESSAGE
diff --git a/common/jpeg/cdjpeg.c b/common/jpeg/cdjpeg.c
new file mode 100644
index 0000000..b6250ff
--- /dev/null
+++ b/common/jpeg/cdjpeg.c
@@ -0,0 +1,181 @@
+/*
+ * cdjpeg.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains common support routines used by the IJG application
+ * programs (cjpeg, djpeg, jpegtran).
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include <ctype.h>		/* to declare isupper(), tolower() */
+#ifdef NEED_SIGNAL_CATCHER
+#include <signal.h>		/* to declare signal() */
+#endif
+#ifdef USE_SETMODE
+#include <fcntl.h>		/* to declare setmode()'s parameter macros */
+/* If you have setmode() but not <io.h>, just delete this line: */
+#include <io.h>			/* to declare setmode() */
+#endif
+
+
+/*
+ * Signal catcher to ensure that temporary files are removed before aborting.
+ * NB: for Amiga Manx C this is actually a global routine named _abort();
+ * we put "#define signal_catcher _abort" in jconfig.h.  Talk about bogus...
+ */
+
+#ifdef NEED_SIGNAL_CATCHER
+
+static j_common_ptr sig_cinfo;
+
+void				/* must be global for Manx C */
+signal_catcher (int signum)
+{
+  if (sig_cinfo != NULL) {
+    if (sig_cinfo->err != NULL) /* turn off trace output */
+      sig_cinfo->err->trace_level = 0;
+    jpeg_destroy(sig_cinfo);	/* clean up memory allocation & temp files */
+  }
+  exit(EXIT_FAILURE);
+}
+
+
+GLOBAL(void)
+enable_signal_catcher (j_common_ptr cinfo)
+{
+  sig_cinfo = cinfo;
+#ifdef SIGINT			/* not all systems have SIGINT */
+  signal(SIGINT, signal_catcher);
+#endif
+#ifdef SIGTERM			/* not all systems have SIGTERM */
+  signal(SIGTERM, signal_catcher);
+#endif
+}
+
+#endif
+
+
+/*
+ * Optional progress monitor: display a percent-done figure on stderr.
+ */
+
+#ifdef PROGRESS_REPORT
+
+METHODDEF(void)
+progress_monitor (j_common_ptr cinfo)
+{
+  cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress;
+  int total_passes = prog->pub.total_passes + prog->total_extra_passes;
+  int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit);
+
+  if (percent_done != prog->percent_done) {
+    prog->percent_done = percent_done;
+    if (total_passes > 1) {
+      fprintf(stderr, "\rPass %d/%d: %3d%% ",
+	      prog->pub.completed_passes + prog->completed_extra_passes + 1,
+	      total_passes, percent_done);
+    } else {
+      fprintf(stderr, "\r %3d%% ", percent_done);
+    }
+    fflush(stderr);
+  }
+}
+
+
+GLOBAL(void)
+start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress)
+{
+  /* Enable progress display, unless trace output is on */
+  if (cinfo->err->trace_level == 0) {
+    progress->pub.progress_monitor = progress_monitor;
+    progress->completed_extra_passes = 0;
+    progress->total_extra_passes = 0;
+    progress->percent_done = -1;
+    cinfo->progress = &progress->pub;
+  }
+}
+
+
+GLOBAL(void)
+end_progress_monitor (j_common_ptr cinfo)
+{
+  /* Clear away progress display */
+  if (cinfo->err->trace_level == 0) {
+    fprintf(stderr, "\r                \r");
+    fflush(stderr);
+  }
+}
+
+#endif
+
+
+/*
+ * Case-insensitive matching of possibly-abbreviated keyword switches.
+ * keyword is the constant keyword (must be lower case already),
+ * minchars is length of minimum legal abbreviation.
+ */
+
+GLOBAL(boolean)
+keymatch (char * arg, const char * keyword, int minchars)
+{
+  register int ca, ck;
+  register int nmatched = 0;
+
+  while ((ca = *arg++) != '\0') {
+    if ((ck = *keyword++) == '\0')
+      return FALSE;		/* arg longer than keyword, no good */
+    if (isupper(ca))		/* force arg to lcase (assume ck is already) */
+      ca = tolower(ca);
+    if (ca != ck)
+      return FALSE;		/* no good */
+    nmatched++;			/* count matched characters */
+  }
+  /* reached end of argument; fail if it's too short for unique abbrev */
+  if (nmatched < minchars)
+    return FALSE;
+  return TRUE;			/* A-OK */
+}
+
+
+/*
+ * Routines to establish binary I/O mode for stdin and stdout.
+ * Non-Unix systems often require some hacking to get out of text mode.
+ */
+
+GLOBAL(FILE *)
+read_stdin (void)
+{
+  FILE * input_file = stdin;
+
+#ifdef USE_SETMODE		/* need to hack file mode? */
+  setmode(fileno(stdin), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+  if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
+    fprintf(stderr, "Cannot reopen stdin\n");
+    exit(EXIT_FAILURE);
+  }
+#endif
+  return input_file;
+}
+
+
+GLOBAL(FILE *)
+write_stdout (void)
+{
+  FILE * output_file = stdout;
+
+#ifdef USE_SETMODE		/* need to hack file mode? */
+  setmode(fileno(stdout), O_BINARY);
+#endif
+#ifdef USE_FDOPEN		/* need to re-open in binary mode? */
+  if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
+    fprintf(stderr, "Cannot reopen stdout\n");
+    exit(EXIT_FAILURE);
+  }
+#endif
+  return output_file;
+}
diff --git a/common/jpeg/cdjpeg.h b/common/jpeg/cdjpeg.h
new file mode 100644
index 0000000..2b387b6
--- /dev/null
+++ b/common/jpeg/cdjpeg.h
@@ -0,0 +1,184 @@
+/*
+ * cdjpeg.h
+ *
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains common declarations for the sample applications
+ * cjpeg and djpeg.  It is NOT used by the core JPEG library.
+ */
+
+#define JPEG_CJPEG_DJPEG	/* define proper options in jconfig.h */
+#define JPEG_INTERNAL_OPTIONS	/* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jerror.h"		/* get library error codes too */
+#include "cderror.h"		/* get application-specific error codes */
+
+
+/*
+ * Object interface for cjpeg's source file decoding modules
+ */
+
+typedef struct cjpeg_source_struct * cjpeg_source_ptr;
+
+struct cjpeg_source_struct {
+  JMETHOD(void, start_input, (j_compress_ptr cinfo,
+			      cjpeg_source_ptr sinfo));
+  JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
+				       cjpeg_source_ptr sinfo));
+  JMETHOD(void, finish_input, (j_compress_ptr cinfo,
+			       cjpeg_source_ptr sinfo));
+
+  FILE *input_file;
+
+  JSAMPARRAY buffer;
+  JDIMENSION buffer_height;
+};
+
+
+/*
+ * Object interface for djpeg's output file encoding modules
+ */
+
+typedef struct djpeg_dest_struct * djpeg_dest_ptr;
+
+struct djpeg_dest_struct {
+  /* start_output is called after jpeg_start_decompress finishes.
+   * The color map will be ready at this time, if one is needed.
+   */
+  JMETHOD(void, start_output, (j_decompress_ptr cinfo,
+			       djpeg_dest_ptr dinfo));
+  /* Emit the specified number of pixel rows from the buffer. */
+  JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo,
+				 djpeg_dest_ptr dinfo,
+				 JDIMENSION rows_supplied));
+  /* Finish up at the end of the image. */
+  JMETHOD(void, finish_output, (j_decompress_ptr cinfo,
+				djpeg_dest_ptr dinfo));
+
+  /* Target file spec; filled in by djpeg.c after object is created. */
+  FILE * output_file;
+
+  /* Output pixel-row buffer.  Created by module init or start_output.
+   * Width is cinfo->output_width * cinfo->output_components;
+   * height is buffer_height.
+   */
+  JSAMPARRAY buffer;
+  JDIMENSION buffer_height;
+};
+
+
+/*
+ * cjpeg/djpeg may need to perform extra passes to convert to or from
+ * the source/destination file format.  The JPEG library does not know
+ * about these passes, but we'd like them to be counted by the progress
+ * monitor.  We use an expanded progress monitor object to hold the
+ * additional pass count.
+ */
+
+struct cdjpeg_progress_mgr {
+  struct jpeg_progress_mgr pub;	/* fields known to JPEG library */
+  int completed_extra_passes;	/* extra passes completed */
+  int total_extra_passes;	/* total extra */
+  /* last printed percentage stored here to avoid multiple printouts */
+  int percent_done;
+};
+
+typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jinit_read_bmp		jIRdBMP
+#define jinit_write_bmp		jIWrBMP
+#define jinit_read_gif		jIRdGIF
+#define jinit_write_gif		jIWrGIF
+#define jinit_read_ppm		jIRdPPM
+#define jinit_write_ppm		jIWrPPM
+#define jinit_read_rle		jIRdRLE
+#define jinit_write_rle		jIWrRLE
+#define jinit_read_targa	jIRdTarga
+#define jinit_write_targa	jIWrTarga
+#define read_quant_tables	RdQTables
+#define read_scan_script	RdScnScript
+#define set_quant_slots		SetQSlots
+#define set_sample_factors	SetSFacts
+#define read_color_map		RdCMap
+#define enable_signal_catcher	EnSigCatcher
+#define start_progress_monitor	StProgMon
+#define end_progress_monitor	EnProgMon
+#define read_stdin		RdStdin
+#define write_stdout		WrStdout
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+/* Module selection routines for I/O modules. */
+
+EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo,
+					    boolean is_os2));
+EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo));
+EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo));
+EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
+
+/* cjpeg support routines (in rdswitch.c) */
+
+EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
+				    int scale_factor, boolean force_baseline));
+EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
+EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
+EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
+
+/* djpeg support routines (in rdcolmap.c) */
+
+EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile));
+
+/* common support routines (in cdjpeg.c) */
+
+EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo));
+EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo,
+					 cd_progress_ptr progress));
+EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo));
+EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars));
+EXTERN(FILE *) read_stdin JPP((void));
+EXTERN(FILE *) write_stdout JPP((void));
+
+/* miscellaneous useful macros */
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#define WRITE_BINARY	"w"
+#else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define WRITE_BINARY	"wb", "ctx=stm"
+#else				/* standard ANSI-compliant case */
+#define READ_BINARY	"rb"
+#define WRITE_BINARY	"wb"
+#endif
+#endif
+
+#ifndef EXIT_FAILURE		/* define exit() codes if not provided */
+#define EXIT_FAILURE  1
+#endif
+#ifndef EXIT_SUCCESS
+#ifdef VMS
+#define EXIT_SUCCESS  1		/* VMS is very nonstandard */
+#else
+#define EXIT_SUCCESS  0
+#endif
+#endif
+#ifndef EXIT_WARNING
+#ifdef VMS
+#define EXIT_WARNING  1		/* VMS is very nonstandard */
+#else
+#define EXIT_WARNING  2
+#endif
+#endif
diff --git a/common/jpeg/cjpeg.c b/common/jpeg/cjpeg.c
new file mode 100644
index 0000000..f2a929f
--- /dev/null
+++ b/common/jpeg/cjpeg.c
@@ -0,0 +1,606 @@
+/*
+ * cjpeg.c
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for the JPEG compressor.
+ * It should work on any system with Unix- or MS-DOS-style command lines.
+ *
+ * Two different command line styles are permitted, depending on the
+ * compile-time switch TWO_FILE_COMMANDLINE:
+ *	cjpeg [options]  inputfile outputfile
+ *	cjpeg [options]  [inputfile]
+ * In the second style, output is always to standard output, which you'd
+ * normally redirect to a file or pipe to some other program.  Input is
+ * either from a named file or from standard input (typically redirected).
+ * The second style is convenient on Unix but is unhelpful on systems that
+ * don't support pipes.  Also, you MUST use the first style if your system
+ * doesn't do binary I/O to stdin/stdout.
+ * To simplify script writing, the "-outfile" switch is provided.  The syntax
+ *	cjpeg [options]  -outfile outputfile  inputfile
+ * works regardless of which command line style is used.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "jversion.h"		/* for version message */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/* Create the add-on message string table. */
+
+#define JMESSAGE(code,string)	string ,
+
+static const char * const cdjpeg_message_table[] = {
+#include "cderror.h"
+  NULL
+};
+
+
+/*
+ * This routine determines what format the input file is,
+ * and selects the appropriate input-reading module.
+ *
+ * To determine which family of input formats the file belongs to,
+ * we may look only at the first byte of the file, since C does not
+ * guarantee that more than one character can be pushed back with ungetc.
+ * Looking at additional bytes would require one of these approaches:
+ *     1) assume we can fseek() the input file (fails for piped input);
+ *     2) assume we can push back more than one character (works in
+ *        some C implementations, but unportable);
+ *     3) provide our own buffering (breaks input readers that want to use
+ *        stdio directly, such as the RLE library);
+ * or  4) don't put back the data, and modify the input_init methods to assume
+ *        they start reading after the start of file (also breaks RLE library).
+ * #1 is attractive for MS-DOS but is untenable on Unix.
+ *
+ * The most portable solution for file types that can't be identified by their
+ * first byte is to make the user tell us what they are.  This is also the
+ * only approach for "raw" file types that contain only arbitrary values.
+ * We presently apply this method for Targa files.  Most of the time Targa
+ * files start with 0x00, so we recognize that case.  Potentially, however,
+ * a Targa file could start with any byte value (byte 0 is the length of the
+ * seldom-used ID field), so we provide a switch to force Targa input mode.
+ */
+
+static boolean is_targa;	/* records user -targa switch */
+
+
+LOCAL(cjpeg_source_ptr)
+select_file_type (j_compress_ptr cinfo, FILE * infile)
+{
+  int c;
+
+  if (is_targa) {
+#ifdef TARGA_SUPPORTED
+    return jinit_read_targa(cinfo);
+#else
+    ERREXIT(cinfo, JERR_TGA_NOTCOMP);
+#endif
+  }
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+  if (ungetc(c, infile) == EOF)
+    ERREXIT(cinfo, JERR_UNGETC_FAILED);
+
+  switch (c) {
+#ifdef BMP_SUPPORTED
+  case 'B':
+    return jinit_read_bmp(cinfo);
+#endif
+#ifdef GIF_SUPPORTED
+  case 'G':
+    return jinit_read_gif(cinfo);
+#endif
+#ifdef PPM_SUPPORTED
+  case 'P':
+    return jinit_read_ppm(cinfo);
+#endif
+#ifdef RLE_SUPPORTED
+  case 'R':
+    return jinit_read_rle(cinfo);
+#endif
+#ifdef TARGA_SUPPORTED
+  case 0x00:
+    return jinit_read_targa(cinfo);
+#endif
+  default:
+    ERREXIT(cinfo, JERR_UNKNOWN_FORMAT);
+    break;
+  }
+
+  return NULL;			/* suppress compiler warnings */
+}
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -quality N     Compression quality (0..100; 5-95 is useful range)\n");
+  fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
+#ifdef ENTROPY_OPT_SUPPORTED
+  fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
+#endif
+#ifdef C_PROGRESSIVE_SUPPORTED
+  fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
+#endif
+#ifdef TARGA_SUPPORTED
+  fprintf(stderr, "  -targa         Input file is Targa format (usually not needed)\n");
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef DCT_ISLOW_SUPPORTED
+  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
+	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
+#endif
+  fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
+#ifdef INPUT_SMOOTHING_SUPPORTED
+  fprintf(stderr, "  -smooth N      Smooth dithered input (N=1..100 is strength)\n");
+#endif
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  fprintf(stderr, "Switches for wizards:\n");
+#ifdef C_ARITH_CODING_SUPPORTED
+  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
+#endif
+  fprintf(stderr, "  -baseline      Force baseline quantization tables\n");
+  fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
+  fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
+  fprintf(stderr, "  -sample HxV[,...]  Set component sampling factors\n");
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+  fprintf(stderr, "  -scans file    Create multi-scan JPEG per script file\n");
+#endif
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(int)
+parse_switches (j_compress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+  int quality;			/* -quality parameter */
+  int q_scale_factor;		/* scaling percentage for -qtables */
+  boolean force_baseline;
+  boolean simple_progressive;
+  char * qtablefile = NULL;	/* saves -qtables filename if any */
+  char * qslotsarg = NULL;	/* saves -qslots parm if any */
+  char * samplearg = NULL;	/* saves -sample parm if any */
+  char * scansarg = NULL;	/* saves -scans parm if any */
+
+  /* Set up default JPEG parameters. */
+  /* Note that default -quality level need not, and does not,
+   * match the default scaling for an explicit -qtables argument.
+   */
+  quality = 75;			/* default -quality value */
+  q_scale_factor = 100;		/* default to no scaling for -qtables */
+  force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
+  simple_progressive = FALSE;
+  is_targa = FALSE;
+  outfilename = NULL;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "arithmetic", 1)) {
+      /* Use arithmetic coding. */
+#ifdef C_ARITH_CODING_SUPPORTED
+      cinfo->arith_code = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "baseline", 1)) {
+      /* Force baseline-compatible output (8-bit quantizer values). */
+      force_baseline = TRUE;
+
+    } else if (keymatch(arg, "dct", 2)) {
+      /* Select DCT algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "int", 1)) {
+	cinfo->dct_method = JDCT_ISLOW;
+      } else if (keymatch(argv[argn], "fast", 2)) {
+	cinfo->dct_method = JDCT_IFAST;
+      } else if (keymatch(argv[argn], "float", 2)) {
+	cinfo->dct_method = JDCT_FLOAT;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
+      /* Force a monochrome JPEG file to be generated. */
+      jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
+      /* Enable entropy parm optimization. */
+#ifdef ENTROPY_OPT_SUPPORTED
+      cinfo->optimize_coding = TRUE;
+#else
+      fprintf(stderr, "%s: sorry, entropy optimization was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "progressive", 1)) {
+      /* Select simple progressive mode. */
+#ifdef C_PROGRESSIVE_SUPPORTED
+      simple_progressive = TRUE;
+      /* We must postpone execution until num_components is known. */
+#else
+      fprintf(stderr, "%s: sorry, progressive output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "quality", 1)) {
+      /* Quality factor (quantization table scaling factor). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &quality) != 1)
+	usage();
+      /* Change scale factor in case -qtables is present. */
+      q_scale_factor = jpeg_quality_scaling(quality);
+
+    } else if (keymatch(arg, "qslots", 2)) {
+      /* Quantization table slot numbers. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qslotsarg = argv[argn];
+      /* Must delay setting qslots until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default quant table numbers.
+       */
+
+    } else if (keymatch(arg, "qtables", 2)) {
+      /* Quantization tables fetched from file. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      qtablefile = argv[argn];
+      /* We postpone actually reading the file in case -quality comes later. */
+
+    } else if (keymatch(arg, "restart", 1)) {
+      /* Restart interval in MCU rows (or in MCUs with 'b'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (lval < 0 || lval > 65535L)
+	usage();
+      if (ch == 'b' || ch == 'B') {
+	cinfo->restart_interval = (unsigned int) lval;
+	cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
+      } else {
+	cinfo->restart_in_rows = (int) lval;
+	/* restart_interval will be computed during startup */
+      }
+
+    } else if (keymatch(arg, "sample", 2)) {
+      /* Set sampling factors. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      samplearg = argv[argn];
+      /* Must delay setting sample factors until after we have processed any
+       * colorspace-determining switches, since jpeg_set_colorspace sets
+       * default sampling factors.
+       */
+
+    } else if (keymatch(arg, "scans", 2)) {
+      /* Set scan script. */
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scansarg = argv[argn];
+      /* We must postpone reading the file in case -progressive appears. */
+#else
+      fprintf(stderr, "%s: sorry, multi-scan output was not compiled\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
+    } else if (keymatch(arg, "smooth", 2)) {
+      /* Set input smoothing factor. */
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      if (val < 0 || val > 100)
+	usage();
+      cinfo->smoothing_factor = val;
+
+    } else if (keymatch(arg, "targa", 1)) {
+      /* Input file is Targa format. */
+      is_targa = TRUE;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  /* Post-switch-scanning cleanup */
+
+  if (for_real) {
+
+    /* Set quantization tables for selected quality. */
+    /* Some or all may be overridden if -qtables is present. */
+    jpeg_set_quality(cinfo, quality, force_baseline);
+
+    if (qtablefile != NULL)	/* process -qtables if it was present */
+      if (! read_quant_tables(cinfo, qtablefile,
+			      q_scale_factor, force_baseline))
+	usage();
+
+    if (qslotsarg != NULL)	/* process -qslots if it was present */
+      if (! set_quant_slots(cinfo, qslotsarg))
+	usage();
+
+    if (samplearg != NULL)	/* process -sample if it was present */
+      if (! set_sample_factors(cinfo, samplearg))
+	usage();
+
+#ifdef C_PROGRESSIVE_SUPPORTED
+    if (simple_progressive)	/* process -progressive; -scans can override */
+      jpeg_simple_progression(cinfo);
+#endif
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+    if (scansarg != NULL)	/* process -scans if it was present */
+      if (! read_scan_script(cinfo, scansarg))
+	usage();
+#endif
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_compress_struct cinfo;
+  struct jpeg_error_mgr jerr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  int file_index;
+  cjpeg_source_ptr src_mgr;
+  FILE * input_file;
+  FILE * output_file;
+  JDIMENSION num_scanlines;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "cjpeg";		/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG compression object with default error handling. */
+  cinfo.err = jpeg_std_error(&jerr);
+  jpeg_create_compress(&cinfo);
+  /* Add some application-specific error messages (from cderror.h) */
+  jerr.addon_message_table = cdjpeg_message_table;
+  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
+  jerr.last_addon_message = JMSG_LASTADDONCODE;
+
+  /* Now safe to enable signal catcher. */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &cinfo);
+#endif
+
+  /* Initialize JPEG parameters.
+   * Much of this may be overridden later.
+   * In particular, we don't yet know the input file's color space,
+   * but we need to provide some value for jpeg_set_defaults() to work.
+   */
+
+  cinfo.in_color_space = JCS_RGB; /* arbitrary guess */
+  jpeg_set_defaults(&cinfo);
+
+  /* Scan command line to find file names.
+   * It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are ignored; we will rescan the switches after opening
+   * the input file.
+   */
+
+  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    input_file = read_stdin();
+  }
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    output_file = write_stdout();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &cinfo, &progress);
+#endif
+
+  /* Figure out the input file format, and set up to read it. */
+  src_mgr = select_file_type(&cinfo, input_file);
+  src_mgr->input_file = input_file;
+
+  /* Read the input file header to obtain file size & colorspace. */
+  (*src_mgr->start_input) (&cinfo, src_mgr);
+
+  /* Now that we know input colorspace, fix colorspace-dependent defaults */
+  jpeg_default_colorspace(&cinfo);
+
+  /* Adjust default compression parameters by re-parsing the options */
+  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
+
+  /* Specify data destination for compression */
+  jpeg_stdio_dest(&cinfo, output_file);
+
+  /* Start compressor */
+  jpeg_start_compress(&cinfo, TRUE);
+
+  /* Process data */
+  while (cinfo.next_scanline < cinfo.image_height) {
+    num_scanlines = (*src_mgr->get_pixel_rows) (&cinfo, src_mgr);
+    (void) jpeg_write_scanlines(&cinfo, src_mgr->buffer, num_scanlines);
+  }
+
+  /* Finish compression and release memory */
+  (*src_mgr->finish_input) (&cinfo, src_mgr);
+  jpeg_finish_compress(&cinfo);
+  jpeg_destroy_compress(&cinfo);
+
+  /* Close files, if we opened them */
+  if (input_file != stdin)
+    fclose(input_file);
+  if (output_file != stdout)
+    fclose(output_file);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &cinfo);
+#endif
+
+  /* All done. */
+  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}
diff --git a/common/jpeg/djpeg.c b/common/jpeg/djpeg.c
new file mode 100644
index 0000000..e099e90
--- /dev/null
+++ b/common/jpeg/djpeg.c
@@ -0,0 +1,616 @@
+/*
+ * djpeg.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains a command-line user interface for the JPEG decompressor.
+ * It should work on any system with Unix- or MS-DOS-style command lines.
+ *
+ * Two different command line styles are permitted, depending on the
+ * compile-time switch TWO_FILE_COMMANDLINE:
+ *	djpeg [options]  inputfile outputfile
+ *	djpeg [options]  [inputfile]
+ * In the second style, output is always to standard output, which you'd
+ * normally redirect to a file or pipe to some other program.  Input is
+ * either from a named file or from standard input (typically redirected).
+ * The second style is convenient on Unix but is unhelpful on systems that
+ * don't support pipes.  Also, you MUST use the first style if your system
+ * doesn't do binary I/O to stdin/stdout.
+ * To simplify script writing, the "-outfile" switch is provided.  The syntax
+ *	djpeg [options]  -outfile outputfile  inputfile
+ * works regardless of which command line style is used.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "jversion.h"		/* for version message */
+
+#include <ctype.h>		/* to declare isprint() */
+
+#ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
+#ifdef __MWERKS__
+#include <SIOUX.h>              /* Metrowerks needs this */
+#include <console.h>		/* ... and this */
+#endif
+#ifdef THINK_C
+#include <console.h>		/* Think declares it here */
+#endif
+#endif
+
+
+/* Create the add-on message string table. */
+
+#define JMESSAGE(code,string)	string ,
+
+static const char * const cdjpeg_message_table[] = {
+#include "cderror.h"
+  NULL
+};
+
+
+/*
+ * This list defines the known output image formats
+ * (not all of which need be supported by a given version).
+ * You can change the default output format by defining DEFAULT_FMT;
+ * indeed, you had better do so if you undefine PPM_SUPPORTED.
+ */
+
+typedef enum {
+	FMT_BMP,		/* BMP format (Windows flavor) */
+	FMT_GIF,		/* GIF format */
+	FMT_OS2,		/* BMP format (OS/2 flavor) */
+	FMT_PPM,		/* PPM/PGM (PBMPLUS formats) */
+	FMT_RLE,		/* RLE format */
+	FMT_TARGA,		/* Targa format */
+	FMT_TIFF		/* TIFF format */
+} IMAGE_FORMATS;
+
+#ifndef DEFAULT_FMT		/* so can override from CFLAGS in Makefile */
+#define DEFAULT_FMT	FMT_PPM
+#endif
+
+static IMAGE_FORMATS requested_fmt;
+
+
+/*
+ * Argument-parsing code.
+ * The switch parser is designed to be useful with DOS-style command line
+ * syntax, ie, intermixed switches and file names, where only the switches
+ * to the left of a given file name affect processing of that file.
+ * The main program in this file doesn't actually use this capability...
+ */
+
+
+static const char * progname;	/* program name for error messages */
+static char * outfilename;	/* for -outfile switch */
+
+
+LOCAL(void)
+usage (void)
+/* complain about bad command line */
+{
+  fprintf(stderr, "usage: %s [switches] ", progname);
+#ifdef TWO_FILE_COMMANDLINE
+  fprintf(stderr, "inputfile outputfile\n");
+#else
+  fprintf(stderr, "[inputfile]\n");
+#endif
+
+  fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -colors N      Reduce image to no more than N colors\n");
+  fprintf(stderr, "  -fast          Fast, low-quality processing\n");
+  fprintf(stderr, "  -grayscale     Force grayscale output\n");
+#ifdef IDCT_SCALING_SUPPORTED
+  fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
+#endif
+#ifdef BMP_SUPPORTED
+  fprintf(stderr, "  -bmp           Select BMP output format (Windows style)%s\n",
+	  (DEFAULT_FMT == FMT_BMP ? " (default)" : ""));
+#endif
+#ifdef GIF_SUPPORTED
+  fprintf(stderr, "  -gif           Select GIF output format%s\n",
+	  (DEFAULT_FMT == FMT_GIF ? " (default)" : ""));
+#endif
+#ifdef BMP_SUPPORTED
+  fprintf(stderr, "  -os2           Select BMP output format (OS/2 style)%s\n",
+	  (DEFAULT_FMT == FMT_OS2 ? " (default)" : ""));
+#endif
+#ifdef PPM_SUPPORTED
+  fprintf(stderr, "  -pnm           Select PBMPLUS (PPM/PGM) output format%s\n",
+	  (DEFAULT_FMT == FMT_PPM ? " (default)" : ""));
+#endif
+#ifdef RLE_SUPPORTED
+  fprintf(stderr, "  -rle           Select Utah RLE output format%s\n",
+	  (DEFAULT_FMT == FMT_RLE ? " (default)" : ""));
+#endif
+#ifdef TARGA_SUPPORTED
+  fprintf(stderr, "  -targa         Select Targa output format%s\n",
+	  (DEFAULT_FMT == FMT_TARGA ? " (default)" : ""));
+#endif
+  fprintf(stderr, "Switches for advanced users:\n");
+#ifdef DCT_ISLOW_SUPPORTED
+  fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  fprintf(stderr, "  -dct fast      Use fast integer DCT (less accurate)%s\n",
+	  (JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
+	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
+#endif
+  fprintf(stderr, "  -dither fs     Use F-S dithering (default)\n");
+  fprintf(stderr, "  -dither none   Don't use dithering in quantization\n");
+  fprintf(stderr, "  -dither ordered  Use ordered dither (medium speed, quality)\n");
+#ifdef QUANT_2PASS_SUPPORTED
+  fprintf(stderr, "  -map FILE      Map to colors used in named image file\n");
+#endif
+  fprintf(stderr, "  -nosmooth      Don't use high-quality upsampling\n");
+#ifdef QUANT_1PASS_SUPPORTED
+  fprintf(stderr, "  -onepass       Use 1-pass quantization (fast, low quality)\n");
+#endif
+  fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
+  fprintf(stderr, "  -outfile name  Specify name for output file\n");
+  fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
+  exit(EXIT_FAILURE);
+}
+
+
+LOCAL(int)
+parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
+		int last_file_arg_seen, boolean for_real)
+/* Parse optional switches.
+ * Returns argv[] index of first file-name argument (== argc if none).
+ * Any file names with indexes <= last_file_arg_seen are ignored;
+ * they have presumably been processed in a previous iteration.
+ * (Pass 0 for last_file_arg_seen on the first or only iteration.)
+ * for_real is FALSE on the first (dummy) pass; we may skip any expensive
+ * processing.
+ */
+{
+  int argn;
+  char * arg;
+
+  /* Set up default JPEG parameters. */
+  requested_fmt = DEFAULT_FMT;	/* set default output file format */
+  outfilename = NULL;
+  cinfo->err->trace_level = 0;
+
+  /* Scan command line options, adjust parameters */
+
+  for (argn = 1; argn < argc; argn++) {
+    arg = argv[argn];
+    if (*arg != '-') {
+      /* Not a switch, must be a file name argument */
+      if (argn <= last_file_arg_seen) {
+	outfilename = NULL;	/* -outfile applies to just one input file */
+	continue;		/* ignore this name if previously processed */
+      }
+      break;			/* else done parsing switches */
+    }
+    arg++;			/* advance past switch marker character */
+
+    if (keymatch(arg, "bmp", 1)) {
+      /* BMP output format. */
+      requested_fmt = FMT_BMP;
+
+    } else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) ||
+	       keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) {
+      /* Do color quantization. */
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      cinfo->desired_number_of_colors = val;
+      cinfo->quantize_colors = TRUE;
+
+    } else if (keymatch(arg, "dct", 2)) {
+      /* Select IDCT algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "int", 1)) {
+	cinfo->dct_method = JDCT_ISLOW;
+      } else if (keymatch(argv[argn], "fast", 2)) {
+	cinfo->dct_method = JDCT_IFAST;
+      } else if (keymatch(argv[argn], "float", 2)) {
+	cinfo->dct_method = JDCT_FLOAT;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "dither", 2)) {
+      /* Select dithering algorithm. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "fs", 2)) {
+	cinfo->dither_mode = JDITHER_FS;
+      } else if (keymatch(argv[argn], "none", 2)) {
+	cinfo->dither_mode = JDITHER_NONE;
+      } else if (keymatch(argv[argn], "ordered", 2)) {
+	cinfo->dither_mode = JDITHER_ORDERED;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
+      /* Enable debug printouts. */
+      /* On first -d, print version identification */
+      static boolean printed_version = FALSE;
+
+      if (! printed_version) {
+	fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n",
+		JVERSION, JCOPYRIGHT);
+	printed_version = TRUE;
+      }
+      cinfo->err->trace_level++;
+
+    } else if (keymatch(arg, "fast", 1)) {
+      /* Select recommended processing options for quick-and-dirty output. */
+      cinfo->two_pass_quantize = FALSE;
+      cinfo->dither_mode = JDITHER_ORDERED;
+      if (! cinfo->quantize_colors) /* don't override an earlier -colors */
+	cinfo->desired_number_of_colors = 216;
+      cinfo->dct_method = JDCT_FASTEST;
+      cinfo->do_fancy_upsampling = FALSE;
+
+    } else if (keymatch(arg, "gif", 1)) {
+      /* GIF output format. */
+      requested_fmt = FMT_GIF;
+
+    } else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
+      /* Force monochrome output. */
+      cinfo->out_color_space = JCS_GRAYSCALE;
+
+    } else if (keymatch(arg, "map", 3)) {
+      /* Quantize to a color map taken from an input file. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (for_real) {		/* too expensive to do twice! */
+#ifdef QUANT_2PASS_SUPPORTED	/* otherwise can't quantize to supplied map */
+	FILE * mapfile;
+
+	if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) {
+	  fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
+	  exit(EXIT_FAILURE);
+	}
+	read_color_map(cinfo, mapfile);
+	fclose(mapfile);
+	cinfo->quantize_colors = TRUE;
+#else
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+#endif
+      }
+
+    } else if (keymatch(arg, "maxmemory", 3)) {
+      /* Maximum memory in Kb (or Mb with 'm'). */
+      long lval;
+      char ch = 'x';
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
+	usage();
+      if (ch == 'm' || ch == 'M')
+	lval *= 1000L;
+      cinfo->mem->max_memory_to_use = lval * 1000L;
+
+    } else if (keymatch(arg, "nosmooth", 3)) {
+      /* Suppress fancy upsampling */
+      cinfo->do_fancy_upsampling = FALSE;
+
+    } else if (keymatch(arg, "onepass", 3)) {
+      /* Use fast one-pass quantization. */
+      cinfo->two_pass_quantize = FALSE;
+
+    } else if (keymatch(arg, "os2", 3)) {
+      /* BMP output format (OS/2 flavor). */
+      requested_fmt = FMT_OS2;
+
+    } else if (keymatch(arg, "outfile", 4)) {
+      /* Set output file name. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      outfilename = argv[argn];	/* save it away for later use */
+
+    } else if (keymatch(arg, "pnm", 1) || keymatch(arg, "ppm", 1)) {
+      /* PPM/PGM output format. */
+      requested_fmt = FMT_PPM;
+
+    } else if (keymatch(arg, "rle", 1)) {
+      /* RLE output format. */
+      requested_fmt = FMT_RLE;
+
+    } else if (keymatch(arg, "scale", 1)) {
+      /* Scale the output image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d/%d",
+		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
+	usage();
+
+    } else if (keymatch(arg, "targa", 1)) {
+      /* Targa output format. */
+      requested_fmt = FMT_TARGA;
+
+    } else {
+      usage();			/* bogus switch */
+    }
+  }
+
+  return argn;			/* return index of next arg (file name) */
+}
+
+
+/*
+ * Marker processor for COM and interesting APPn markers.
+ * This replaces the library's built-in processor, which just skips the marker.
+ * We want to print out the marker as text, to the extent possible.
+ * Note this code relies on a non-suspending data source.
+ */
+
+LOCAL(unsigned int)
+jpeg_getc (j_decompress_ptr cinfo)
+/* Read next byte */
+{
+  struct jpeg_source_mgr * datasrc = cinfo->src;
+
+  if (datasrc->bytes_in_buffer == 0) {
+    if (! (*datasrc->fill_input_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  }
+  datasrc->bytes_in_buffer--;
+  return GETJOCTET(*datasrc->next_input_byte++);
+}
+
+
+METHODDEF(boolean)
+print_text_marker (j_decompress_ptr cinfo)
+{
+  boolean traceit = (cinfo->err->trace_level >= 1);
+  INT32 length;
+  unsigned int ch;
+  unsigned int lastch = 0;
+
+  length = jpeg_getc(cinfo) << 8;
+  length += jpeg_getc(cinfo);
+  length -= 2;			/* discount the length word itself */
+
+  if (traceit) {
+    if (cinfo->unread_marker == JPEG_COM)
+      fprintf(stderr, "Comment, length %ld:\n", (long) length);
+    else			/* assume it is an APPn otherwise */
+      fprintf(stderr, "APP%d, length %ld:\n",
+	      cinfo->unread_marker - JPEG_APP0, (long) length);
+  }
+
+  while (--length >= 0) {
+    ch = jpeg_getc(cinfo);
+    if (traceit) {
+      /* Emit the character in a readable form.
+       * Nonprintables are converted to \nnn form,
+       * while \ is converted to \\.
+       * Newlines in CR, CR/LF, or LF form will be printed as one newline.
+       */
+      if (ch == '\r') {
+	fprintf(stderr, "\n");
+      } else if (ch == '\n') {
+	if (lastch != '\r')
+	  fprintf(stderr, "\n");
+      } else if (ch == '\\') {
+	fprintf(stderr, "\\\\");
+      } else if (isprint(ch)) {
+	putc(ch, stderr);
+      } else {
+	fprintf(stderr, "\\%03o", ch);
+      }
+      lastch = ch;
+    }
+  }
+
+  if (traceit)
+    fprintf(stderr, "\n");
+
+  return TRUE;
+}
+
+
+/*
+ * The main program.
+ */
+
+int
+main (int argc, char **argv)
+{
+  struct jpeg_decompress_struct cinfo;
+  struct jpeg_error_mgr jerr;
+#ifdef PROGRESS_REPORT
+  struct cdjpeg_progress_mgr progress;
+#endif
+  int file_index;
+  djpeg_dest_ptr dest_mgr = NULL;
+  FILE * input_file;
+  FILE * output_file;
+  JDIMENSION num_scanlines;
+
+  /* On Mac, fetch a command line. */
+#ifdef USE_CCOMMAND
+  argc = ccommand(&argv);
+#endif
+
+  progname = argv[0];
+  if (progname == NULL || progname[0] == 0)
+    progname = "djpeg";		/* in case C library doesn't provide it */
+
+  /* Initialize the JPEG decompression object with default error handling. */
+  cinfo.err = jpeg_std_error(&jerr);
+  jpeg_create_decompress(&cinfo);
+  /* Add some application-specific error messages (from cderror.h) */
+  jerr.addon_message_table = cdjpeg_message_table;
+  jerr.first_addon_message = JMSG_FIRSTADDONCODE;
+  jerr.last_addon_message = JMSG_LASTADDONCODE;
+
+  /* Insert custom marker processor for COM and APP12.
+   * APP12 is used by some digital camera makers for textual info,
+   * so we provide the ability to display it as text.
+   * If you like, additional APPn marker types can be selected for display,
+   * but don't try to override APP0 or APP14 this way (see libjpeg.doc).
+   */
+  jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
+  jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
+
+  /* Now safe to enable signal catcher. */
+#ifdef NEED_SIGNAL_CATCHER
+  enable_signal_catcher((j_common_ptr) &cinfo);
+#endif
+
+  /* Scan command line to find file names. */
+  /* It is convenient to use just one switch-parsing routine, but the switch
+   * values read here are ignored; we will rescan the switches after opening
+   * the input file.
+   * (Exception: tracing level set here controls verbosity for COM markers
+   * found during jpeg_read_header...)
+   */
+
+  file_index = parse_switches(&cinfo, argc, argv, 0, FALSE);
+
+#ifdef TWO_FILE_COMMANDLINE
+  /* Must have either -outfile switch or explicit output file name */
+  if (outfilename == NULL) {
+    if (file_index != argc-2) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+    outfilename = argv[file_index+1];
+  } else {
+    if (file_index != argc-1) {
+      fprintf(stderr, "%s: must name one input and one output file\n",
+	      progname);
+      usage();
+    }
+  }
+#else
+  /* Unix style: expect zero or one file name */
+  if (file_index < argc-1) {
+    fprintf(stderr, "%s: only one input file\n", progname);
+    usage();
+  }
+#endif /* TWO_FILE_COMMANDLINE */
+
+  /* Open the input file. */
+  if (file_index < argc) {
+    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default input file is stdin */
+    input_file = read_stdin();
+  }
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    output_file = write_stdout();
+  }
+
+#ifdef PROGRESS_REPORT
+  start_progress_monitor((j_common_ptr) &cinfo, &progress);
+#endif
+
+  /* Specify data source for decompression */
+  jpeg_stdio_src(&cinfo, input_file);
+
+  /* Read file header, set default decompression parameters */
+  (void) jpeg_read_header(&cinfo, TRUE);
+
+  /* Adjust default decompression parameters by re-parsing the options */
+  file_index = parse_switches(&cinfo, argc, argv, 0, TRUE);
+
+  /* Initialize the output module now to let it override any crucial
+   * option settings (for instance, GIF wants to force color quantization).
+   */
+  switch (requested_fmt) {
+#ifdef BMP_SUPPORTED
+  case FMT_BMP:
+    dest_mgr = jinit_write_bmp(&cinfo, FALSE);
+    break;
+  case FMT_OS2:
+    dest_mgr = jinit_write_bmp(&cinfo, TRUE);
+    break;
+#endif
+#ifdef GIF_SUPPORTED
+  case FMT_GIF:
+    dest_mgr = jinit_write_gif(&cinfo);
+    break;
+#endif
+#ifdef PPM_SUPPORTED
+  case FMT_PPM:
+    dest_mgr = jinit_write_ppm(&cinfo);
+    break;
+#endif
+#ifdef RLE_SUPPORTED
+  case FMT_RLE:
+    dest_mgr = jinit_write_rle(&cinfo);
+    break;
+#endif
+#ifdef TARGA_SUPPORTED
+  case FMT_TARGA:
+    dest_mgr = jinit_write_targa(&cinfo);
+    break;
+#endif
+  default:
+    ERREXIT(&cinfo, JERR_UNSUPPORTED_FORMAT);
+    break;
+  }
+  dest_mgr->output_file = output_file;
+
+  /* Start decompressor */
+  (void) jpeg_start_decompress(&cinfo);
+
+  /* Write output file header */
+  (*dest_mgr->start_output) (&cinfo, dest_mgr);
+
+  /* Process data */
+  while (cinfo.output_scanline < cinfo.output_height) {
+    num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
+					dest_mgr->buffer_height);
+    (*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
+  }
+
+#ifdef PROGRESS_REPORT
+  /* Hack: count final pass as done in case finish_output does an extra pass.
+   * The library won't have updated completed_passes.
+   */
+  progress.pub.completed_passes = progress.pub.total_passes;
+#endif
+
+  /* Finish decompression and release memory.
+   * I must do it in this order because output module has allocated memory
+   * of lifespan JPOOL_IMAGE; it needs to finish before releasing memory.
+   */
+  (*dest_mgr->finish_output) (&cinfo, dest_mgr);
+  (void) jpeg_finish_decompress(&cinfo);
+  jpeg_destroy_decompress(&cinfo);
+
+  /* Close files, if we opened them */
+  if (input_file != stdin)
+    fclose(input_file);
+  if (output_file != stdout)
+    fclose(output_file);
+
+#ifdef PROGRESS_REPORT
+  end_progress_monitor((j_common_ptr) &cinfo);
+#endif
+
+  /* All done. */
+  exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
+  return 0;			/* suppress no-return-value warnings */
+}
diff --git a/common/jpeg/rdbmp.c b/common/jpeg/rdbmp.c
new file mode 100644
index 0000000..b05fe2a
--- /dev/null
+++ b/common/jpeg/rdbmp.c
@@ -0,0 +1,439 @@
+/*
+ * rdbmp.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in Microsoft "BMP"
+ * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors).
+ * Currently, only 8-bit and 24-bit images are supported, not 1-bit or
+ * 4-bit (feeding such low-depth images into JPEG would be silly anyway).
+ * Also, we don't support RLE-compressed files.
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume input from
+ * an ordinary stdio stream.  They further assume that reading begins
+ * at the start of the file; start_input may need work if the
+ * user interface has already read some data (e.g., to determine that
+ * the file is indeed BMP format).
+ *
+ * This code contributed by James Arthur Boucher.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef BMP_SUPPORTED
+
+
+/* Macros to deal with unsigned chars as efficiently as compiler allows */
+
+#ifdef HAVE_UNSIGNED_CHAR
+typedef unsigned char U_CHAR;
+#define UCH(x)	((int) (x))
+#else /* !HAVE_UNSIGNED_CHAR */
+#ifdef CHAR_IS_UNSIGNED
+typedef char U_CHAR;
+#define UCH(x)	((int) (x))
+#else
+typedef char U_CHAR;
+#define UCH(x)	((int) (x) & 0xFF)
+#endif
+#endif /* HAVE_UNSIGNED_CHAR */
+
+
+#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
+
+
+/* Private version of data source object */
+
+typedef struct _bmp_source_struct * bmp_source_ptr;
+
+typedef struct _bmp_source_struct {
+  struct cjpeg_source_struct pub; /* public fields */
+
+  j_compress_ptr cinfo;		/* back link saves passing separate parm */
+
+  JSAMPARRAY colormap;		/* BMP colormap (converted to my format) */
+
+  jvirt_sarray_ptr whole_image;	/* Needed to reverse row order */
+  JDIMENSION source_row;	/* Current source row number */
+  JDIMENSION row_width;		/* Physical width of scanlines in file */
+
+  int bits_per_pixel;		/* remembers 8- or 24-bit format */
+} bmp_source_struct;
+
+
+LOCAL(int)
+read_byte (bmp_source_ptr sinfo)
+/* Read next byte from BMP file */
+{
+  register FILE *infile = sinfo->pub.input_file;
+  register int c;
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(sinfo->cinfo, JERR_INPUT_EOF);
+  return c;
+}
+
+
+LOCAL(void)
+read_colormap (bmp_source_ptr sinfo, int cmaplen, int mapentrysize)
+/* Read the colormap from a BMP file */
+{
+  int i;
+
+  switch (mapentrysize) {
+  case 3:
+    /* BGR format (occurs in OS/2 files) */
+    for (i = 0; i < cmaplen; i++) {
+      sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
+      sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
+      sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
+    }
+    break;
+  case 4:
+    /* BGR0 format (occurs in MS Windows files) */
+    for (i = 0; i < cmaplen; i++) {
+      sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
+      sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
+      sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
+      (void) read_byte(sinfo);
+    }
+    break;
+  default:
+    ERREXIT(sinfo->cinfo, JERR_BMP_BADCMAP);
+    break;
+  }
+}
+
+
+/*
+ * Read one row of pixels.
+ * The image has been read into the whole_image array, but is otherwise
+ * unprocessed.  We must read it out in top-to-bottom row order, and if
+ * it is an 8-bit image, we must expand colormapped pixels to 24bit format.
+ */
+
+METHODDEF(JDIMENSION)
+get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 8-bit colormap indexes */
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  register JSAMPARRAY colormap = source->colormap;
+  JSAMPARRAY image_ptr;
+  register int t;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+
+  /* Fetch next row from virtual array */
+  source->source_row--;
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->whole_image,
+     source->source_row, (JDIMENSION) 1, FALSE);
+
+  /* Expand the colormap indexes to real data */
+  inptr = image_ptr[0];
+  outptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    t = GETJSAMPLE(*inptr++);
+    *outptr++ = colormap[0][t];	/* can omit GETJSAMPLE() safely */
+    *outptr++ = colormap[1][t];
+    *outptr++ = colormap[2][t];
+  }
+
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 24-bit pixels */
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+
+  /* Fetch next row from virtual array */
+  source->source_row--;
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->whole_image,
+     source->source_row, (JDIMENSION) 1, FALSE);
+
+  /* Transfer data.  Note source values are in BGR order
+   * (even though Microsoft's own documents say the opposite).
+   */
+  inptr = image_ptr[0];
+  outptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    outptr[2] = *inptr++;	/* can omit GETJSAMPLE() safely */
+    outptr[1] = *inptr++;
+    outptr[0] = *inptr++;
+    outptr += 3;
+  }
+
+  return 1;
+}
+
+
+/*
+ * This method loads the image into whole_image during the first call on
+ * get_pixel_rows.  The get_pixel_rows pointer is then adjusted to call
+ * get_8bit_row or get_24bit_row on subsequent calls.
+ */
+
+METHODDEF(JDIMENSION)
+preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  register FILE *infile = source->pub.input_file;
+  register int c;
+  register JSAMPROW out_ptr;
+  JSAMPARRAY image_ptr;
+  JDIMENSION row, col;
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+
+  /* Read the data into a virtual array in input-file row order. */
+  for (row = 0; row < cinfo->image_height; row++) {
+    if (progress != NULL) {
+      progress->pub.pass_counter = (long) row;
+      progress->pub.pass_limit = (long) cinfo->image_height;
+      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+    }
+    image_ptr = (*cinfo->mem->access_virt_sarray)
+      ((j_common_ptr) cinfo, source->whole_image,
+       row, (JDIMENSION) 1, TRUE);
+    out_ptr = image_ptr[0];
+    for (col = source->row_width; col > 0; col--) {
+      /* inline copy of read_byte() for speed */
+      if ((c = getc(infile)) == EOF)
+	ERREXIT(cinfo, JERR_INPUT_EOF);
+      *out_ptr++ = (JSAMPLE) c;
+    }
+  }
+  if (progress != NULL)
+    progress->completed_extra_passes++;
+
+  /* Set up to read from the virtual array in top-to-bottom order */
+  switch (source->bits_per_pixel) {
+  case 8:
+    source->pub.get_pixel_rows = get_8bit_row;
+    break;
+  case 24:
+    source->pub.get_pixel_rows = get_24bit_row;
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BMP_BADDEPTH);
+  }
+  source->source_row = cinfo->image_height;
+
+  /* And read the first row */
+  return (*source->pub.get_pixel_rows) (cinfo, sinfo);
+}
+
+
+/*
+ * Read the file header; return image size and component count.
+ */
+
+METHODDEF(void)
+start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  U_CHAR bmpfileheader[14];
+  U_CHAR bmpinfoheader[64];
+#define GET_2B(array,offset)  ((unsigned int) UCH(array[offset]) + \
+			       (((unsigned int) UCH(array[offset+1])) << 8))
+#define GET_4B(array,offset)  ((INT32) UCH(array[offset]) + \
+			       (((INT32) UCH(array[offset+1])) << 8) + \
+			       (((INT32) UCH(array[offset+2])) << 16) + \
+			       (((INT32) UCH(array[offset+3])) << 24))
+  INT32 bfOffBits;
+  INT32 headerSize;
+  INT32 biWidth = 0;		/* initialize to avoid compiler warning */
+  INT32 biHeight = 0;
+  unsigned int biPlanes;
+  INT32 biCompression;
+  INT32 biXPelsPerMeter,biYPelsPerMeter;
+  INT32 biClrUsed = 0;
+  int mapentrysize = 0;		/* 0 indicates no colormap */
+  INT32 bPad;
+  JDIMENSION row_width;
+
+  /* Read and verify the bitmap file header */
+  if (! ReadOK(source->pub.input_file, bmpfileheader, 14))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */
+    ERREXIT(cinfo, JERR_BMP_NOT);
+  bfOffBits = (INT32) GET_4B(bmpfileheader,10);
+  /* We ignore the remaining fileheader fields */
+
+  /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows),
+   * or 64 bytes (OS/2 2.x).  Check the first 4 bytes to find out which.
+   */
+  if (! ReadOK(source->pub.input_file, bmpinfoheader, 4))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  headerSize = (INT32) GET_4B(bmpinfoheader,0);
+  if (headerSize < 12 || headerSize > 64)
+    ERREXIT(cinfo, JERR_BMP_BADHEADER);
+  if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+
+  switch ((int) headerSize) {
+  case 12:
+    /* Decode OS/2 1.x header (Microsoft calls this a BITMAPCOREHEADER) */
+    biWidth = (INT32) GET_2B(bmpinfoheader,4);
+    biHeight = (INT32) GET_2B(bmpinfoheader,6);
+    biPlanes = GET_2B(bmpinfoheader,8);
+    source->bits_per_pixel = (int) GET_2B(bmpinfoheader,10);
+
+    switch (source->bits_per_pixel) {
+    case 8:			/* colormapped image */
+      mapentrysize = 3;		/* OS/2 uses RGBTRIPLE colormap */
+      TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight);
+      break;
+    case 24:			/* RGB image */
+      TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight);
+      break;
+    default:
+      ERREXIT(cinfo, JERR_BMP_BADDEPTH);
+      break;
+    }
+    if (biPlanes != 1)
+      ERREXIT(cinfo, JERR_BMP_BADPLANES);
+    break;
+  case 40:
+  case 64:
+    /* Decode Windows 3.x header (Microsoft calls this a BITMAPINFOHEADER) */
+    /* or OS/2 2.x header, which has additional fields that we ignore */
+    biWidth = GET_4B(bmpinfoheader,4);
+    biHeight = GET_4B(bmpinfoheader,8);
+    biPlanes = GET_2B(bmpinfoheader,12);
+    source->bits_per_pixel = (int) GET_2B(bmpinfoheader,14);
+    biCompression = GET_4B(bmpinfoheader,16);
+    biXPelsPerMeter = GET_4B(bmpinfoheader,24);
+    biYPelsPerMeter = GET_4B(bmpinfoheader,28);
+    biClrUsed = GET_4B(bmpinfoheader,32);
+    /* biSizeImage, biClrImportant fields are ignored */
+
+    switch (source->bits_per_pixel) {
+    case 8:			/* colormapped image */
+      mapentrysize = 4;		/* Windows uses RGBQUAD colormap */
+      TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight);
+      break;
+    case 24:			/* RGB image */
+      TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
+      break;
+    default:
+      ERREXIT(cinfo, JERR_BMP_BADDEPTH);
+      break;
+    }
+    if (biPlanes != 1)
+      ERREXIT(cinfo, JERR_BMP_BADPLANES);
+    if (biCompression != 0)
+      ERREXIT(cinfo, JERR_BMP_COMPRESSED);
+
+    if (biXPelsPerMeter > 0 && biYPelsPerMeter > 0) {
+      /* Set JFIF density parameters from the BMP data */
+      cinfo->X_density = (UINT16) (biXPelsPerMeter/100); /* 100 cm per meter */
+      cinfo->Y_density = (UINT16) (biYPelsPerMeter/100);
+      cinfo->density_unit = 2;	/* dots/cm */
+    }
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BMP_BADHEADER);
+    break;
+  }
+
+  /* Compute distance to bitmap data --- will adjust for colormap below */
+  bPad = bfOffBits - (headerSize + 14);
+
+  /* Read the colormap, if any */
+  if (mapentrysize > 0) {
+    if (biClrUsed <= 0)
+      biClrUsed = 256;		/* assume it's 256 */
+    else if (biClrUsed > 256)
+      ERREXIT(cinfo, JERR_BMP_BADCMAP);
+    /* Allocate space to store the colormap */
+    source->colormap = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) biClrUsed, (JDIMENSION) 3);
+    /* and read it from the file */
+    read_colormap(source, (int) biClrUsed, mapentrysize);
+    /* account for size of colormap */
+    bPad -= biClrUsed * mapentrysize;
+  }
+
+  /* Skip any remaining pad bytes */
+  if (bPad < 0)			/* incorrect bfOffBits value? */
+    ERREXIT(cinfo, JERR_BMP_BADHEADER);
+  while (--bPad >= 0) {
+    (void) read_byte(source);
+  }
+
+  /* Compute row width in file, including padding to 4-byte boundary */
+  if (source->bits_per_pixel == 24)
+    row_width = (JDIMENSION) (biWidth * 3);
+  else
+    row_width = (JDIMENSION) biWidth;
+  while ((row_width & 3) != 0) row_width++;
+  source->row_width = row_width;
+
+  /* Allocate space for inversion array, prepare for preload pass */
+  source->whole_image = (*cinfo->mem->request_virt_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+     row_width, (JDIMENSION) biHeight, (JDIMENSION) 1);
+  source->pub.get_pixel_rows = preload_image;
+  if (cinfo->progress != NULL) {
+    cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+    progress->total_extra_passes++; /* count file input as separate pass */
+  }
+
+  /* Allocate one-row buffer for returned data */
+  source->pub.buffer = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE,
+     (JDIMENSION) (biWidth * 3), (JDIMENSION) 1);
+  source->pub.buffer_height = 1;
+
+  cinfo->in_color_space = JCS_RGB;
+  cinfo->input_components = 3;
+  cinfo->data_precision = 8;
+  cinfo->image_width = (JDIMENSION) biWidth;
+  cinfo->image_height = (JDIMENSION) biHeight;
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  /* no work */
+}
+
+
+/*
+ * The module selection routine for BMP format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_bmp (j_compress_ptr cinfo)
+{
+  bmp_source_ptr source;
+
+  /* Create module interface object */
+  source = (bmp_source_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(bmp_source_struct));
+  source->cinfo = cinfo;	/* make back link for subroutines */
+  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
+  source->pub.start_input = start_input_bmp;
+  source->pub.finish_input = finish_input_bmp;
+
+  return (cjpeg_source_ptr) source;
+}
+
+#endif /* BMP_SUPPORTED */
diff --git a/common/jpeg/rdcolmap.c b/common/jpeg/rdcolmap.c
new file mode 100644
index 0000000..42b3437
--- /dev/null
+++ b/common/jpeg/rdcolmap.c
@@ -0,0 +1,253 @@
+/*
+ * rdcolmap.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file implements djpeg's "-map file" switch.  It reads a source image
+ * and constructs a colormap to be supplied to the JPEG decompressor.
+ *
+ * Currently, these file formats are supported for the map file:
+ *   GIF: the contents of the GIF's global colormap are used.
+ *   PPM (either text or raw flavor): the entire file is read and
+ *      each unique pixel value is entered in the map.
+ * Note that reading a large PPM file will be horrendously slow.
+ * Typically, a PPM-format map file should contain just one pixel
+ * of each desired color.  Such a file can be extracted from an
+ * ordinary image PPM file with ppmtomap(1).
+ *
+ * Rescaling a PPM that has a maxval unequal to MAXJSAMPLE is not
+ * currently implemented.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef QUANT_2PASS_SUPPORTED	/* otherwise can't quantize to supplied map */
+
+/* Portions of this code are based on the PBMPLUS library, which is:
+**
+** Copyright (C) 1988 by Jef Poskanzer.
+**
+** Permission to use, copy, modify, and distribute this software and its
+** documentation for any purpose and without fee is hereby granted, provided
+** that the above copyright notice appear in all copies and that both that
+** copyright notice and this permission notice appear in supporting
+** documentation.  This software is provided "as is" without express or
+** implied warranty.
+*/
+
+
+/*
+ * Add a (potentially) new color to the color map.
+ */
+
+LOCAL(void)
+add_map_entry (j_decompress_ptr cinfo, int R, int G, int B)
+{
+  JSAMPROW colormap0 = cinfo->colormap[0];
+  JSAMPROW colormap1 = cinfo->colormap[1];
+  JSAMPROW colormap2 = cinfo->colormap[2];
+  int ncolors = cinfo->actual_number_of_colors;
+  int index;
+
+  /* Check for duplicate color. */
+  for (index = 0; index < ncolors; index++) {
+    if (GETJSAMPLE(colormap0[index]) == R &&
+	GETJSAMPLE(colormap1[index]) == G &&
+	GETJSAMPLE(colormap2[index]) == B)
+      return;			/* color is already in map */
+  }
+
+  /* Check for map overflow. */
+  if (ncolors >= (MAXJSAMPLE+1))
+    ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, (MAXJSAMPLE+1));
+
+  /* OK, add color to map. */
+  colormap0[ncolors] = (JSAMPLE) R;
+  colormap1[ncolors] = (JSAMPLE) G;
+  colormap2[ncolors] = (JSAMPLE) B;
+  cinfo->actual_number_of_colors++;
+}
+
+
+/*
+ * Extract color map from a GIF file.
+ */
+
+LOCAL(void)
+read_gif_map (j_decompress_ptr cinfo, FILE * infile)
+{
+  int header[13];
+  int i, colormaplen;
+  int R, G, B;
+
+  /* Initial 'G' has already been read by read_color_map */
+  /* Read the rest of the GIF header and logical screen descriptor */
+  for (i = 1; i < 13; i++) {
+    if ((header[i] = getc(infile)) == EOF)
+      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+  }
+
+  /* Verify GIF Header */
+  if (header[1] != 'I' || header[2] != 'F')
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+
+  /* There must be a global color map. */
+  if ((header[10] & 0x80) == 0)
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+
+  /* OK, fetch it. */
+  colormaplen = 2 << (header[10] & 0x07);
+
+  for (i = 0; i < colormaplen; i++) {
+    R = getc(infile);
+    G = getc(infile);
+    B = getc(infile);
+    if (R == EOF || G == EOF || B == EOF)
+      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+    add_map_entry(cinfo,
+		  R << (BITS_IN_JSAMPLE-8),
+		  G << (BITS_IN_JSAMPLE-8),
+		  B << (BITS_IN_JSAMPLE-8));
+  }
+}
+
+
+/* Support routines for reading PPM */
+
+
+LOCAL(int)
+pbm_getc (FILE * infile)
+/* Read next char, skipping over any comments */
+/* A comment/newline sequence is returned as a newline */
+{
+  register int ch;
+  
+  ch = getc(infile);
+  if (ch == '#') {
+    do {
+      ch = getc(infile);
+    } while (ch != '\n' && ch != EOF);
+  }
+  return ch;
+}
+
+
+LOCAL(unsigned int)
+read_pbm_integer (j_decompress_ptr cinfo, FILE * infile)
+/* Read an unsigned decimal integer from the PPM file */
+/* Swallows one trailing character after the integer */
+/* Note that on a 16-bit-int machine, only values up to 64k can be read. */
+/* This should not be a problem in practice. */
+{
+  register int ch;
+  register unsigned int val;
+  
+  /* Skip any leading whitespace */
+  do {
+    ch = pbm_getc(infile);
+    if (ch == EOF)
+      ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+  } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r');
+  
+  if (ch < '0' || ch > '9')
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+  
+  val = ch - '0';
+  while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') {
+    val *= 10;
+    val += ch - '0';
+  }
+  return val;
+}
+
+
+/*
+ * Extract color map from a PPM file.
+ */
+
+LOCAL(void)
+read_ppm_map (j_decompress_ptr cinfo, FILE * infile)
+{
+  int c;
+  unsigned int w, h, maxval, row, col;
+  int R, G, B;
+
+  /* Initial 'P' has already been read by read_color_map */
+  c = getc(infile);		/* save format discriminator for a sec */
+
+  /* while we fetch the remaining header info */
+  w = read_pbm_integer(cinfo, infile);
+  h = read_pbm_integer(cinfo, infile);
+  maxval = read_pbm_integer(cinfo, infile);
+
+  if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+
+  /* For now, we don't support rescaling from an unusual maxval. */
+  if (maxval != (unsigned int) MAXJSAMPLE)
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+
+  switch (c) {
+  case '3':			/* it's a text-format PPM file */
+    for (row = 0; row < h; row++) {
+      for (col = 0; col < w; col++) {
+	R = read_pbm_integer(cinfo, infile);
+	G = read_pbm_integer(cinfo, infile);
+	B = read_pbm_integer(cinfo, infile);
+	add_map_entry(cinfo, R, G, B);
+      }
+    }
+    break;
+
+  case '6':			/* it's a raw-format PPM file */
+    for (row = 0; row < h; row++) {
+      for (col = 0; col < w; col++) {
+	R = getc(infile);
+	G = getc(infile);
+	B = getc(infile);
+	if (R == EOF || G == EOF || B == EOF)
+	  ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+	add_map_entry(cinfo, R, G, B);
+      }
+    }
+    break;
+
+  default:
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+    break;
+  }
+}
+
+
+/*
+ * Main entry point from djpeg.c.
+ *  Input: opened input file (from file name argument on command line).
+ *  Output: colormap and actual_number_of_colors fields are set in cinfo.
+ */
+
+GLOBAL(void)
+read_color_map (j_decompress_ptr cinfo, FILE * infile)
+{
+  /* Allocate space for a color map of maximum supported size. */
+  cinfo->colormap = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE,
+     (JDIMENSION) (MAXJSAMPLE+1), (JDIMENSION) 3);
+  cinfo->actual_number_of_colors = 0; /* initialize map to empty */
+
+  /* Read first byte to determine file format */
+  switch (getc(infile)) {
+  case 'G':
+    read_gif_map(cinfo, infile);
+    break;
+  case 'P':
+    read_ppm_map(cinfo, infile);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_BAD_CMAP_FILE);
+    break;
+  }
+}
+
+#endif /* QUANT_2PASS_SUPPORTED */
diff --git a/common/jpeg/rdgif.c b/common/jpeg/rdgif.c
new file mode 100644
index 0000000..b27c167
--- /dev/null
+++ b/common/jpeg/rdgif.c
@@ -0,0 +1,38 @@
+/*
+ * rdgif.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in GIF format.
+ *
+ *****************************************************************************
+ * NOTE: to avoid entanglements with Unisys' patent on LZW compression,      *
+ * the ability to read GIF files has been removed from the IJG distribution. *
+ * Sorry about that.                                                         *
+ *****************************************************************************
+ *
+ * We are required to state that
+ *    "The Graphics Interchange Format(c) is the Copyright property of
+ *    CompuServe Incorporated. GIF(sm) is a Service Mark property of
+ *    CompuServe Incorporated."
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef GIF_SUPPORTED
+
+/*
+ * The module selection routine for GIF format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_gif (j_compress_ptr cinfo)
+{
+  fprintf(stderr, "GIF input is unsupported for legal reasons.  Sorry.\n");
+  exit(EXIT_FAILURE);
+  return NULL;			/* keep compiler happy */
+}
+
+#endif /* GIF_SUPPORTED */
diff --git a/common/jpeg/rdppm.c b/common/jpeg/rdppm.c
new file mode 100644
index 0000000..1df35c1
--- /dev/null
+++ b/common/jpeg/rdppm.c
@@ -0,0 +1,458 @@
+/*
+ * rdppm.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in PPM/PGM format.
+ * The extended 2-byte-per-sample raw PPM/PGM formats are supported.
+ * The PBMPLUS library is NOT required to compile this software
+ * (but it is highly useful as a set of PPM image manipulation programs).
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume input from
+ * an ordinary stdio stream.  They further assume that reading begins
+ * at the start of the file; start_input may need work if the
+ * user interface has already read some data (e.g., to determine that
+ * the file is indeed PPM format).
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef PPM_SUPPORTED
+
+
+/* Portions of this code are based on the PBMPLUS library, which is:
+**
+** Copyright (C) 1988 by Jef Poskanzer.
+**
+** Permission to use, copy, modify, and distribute this software and its
+** documentation for any purpose and without fee is hereby granted, provided
+** that the above copyright notice appear in all copies and that both that
+** copyright notice and this permission notice appear in supporting
+** documentation.  This software is provided "as is" without express or
+** implied warranty.
+*/
+
+
+/* Macros to deal with unsigned chars as efficiently as compiler allows */
+
+#ifdef HAVE_UNSIGNED_CHAR
+typedef unsigned char U_CHAR;
+#define UCH(x)	((int) (x))
+#else /* !HAVE_UNSIGNED_CHAR */
+#ifdef CHAR_IS_UNSIGNED
+typedef char U_CHAR;
+#define UCH(x)	((int) (x))
+#else
+typedef char U_CHAR;
+#define UCH(x)	((int) (x) & 0xFF)
+#endif
+#endif /* HAVE_UNSIGNED_CHAR */
+
+
+#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
+
+
+/*
+ * On most systems, reading individual bytes with getc() is drastically less
+ * efficient than buffering a row at a time with fread().  On PCs, we must
+ * allocate the buffer in near data space, because we are assuming small-data
+ * memory model, wherein fread() can't reach far memory.  If you need to
+ * process very wide images on a PC, you might have to compile in large-memory
+ * model, or else replace fread() with a getc() loop --- which will be much
+ * slower.
+ */
+
+
+/* Private version of data source object */
+
+typedef struct {
+  struct cjpeg_source_struct pub; /* public fields */
+
+  U_CHAR *iobuffer;		/* non-FAR pointer to I/O buffer */
+  JSAMPROW pixrow;		/* FAR pointer to same */
+  size_t buffer_width;		/* width of I/O buffer */
+  JSAMPLE *rescale;		/* => maxval-remapping array, or NULL */
+} ppm_source_struct;
+
+typedef ppm_source_struct * ppm_source_ptr;
+
+
+LOCAL(int)
+pbm_getc (FILE * infile)
+/* Read next char, skipping over any comments */
+/* A comment/newline sequence is returned as a newline */
+{
+  register int ch;
+
+  ch = getc(infile);
+  if (ch == '#') {
+    do {
+      ch = getc(infile);
+    } while (ch != '\n' && ch != EOF);
+  }
+  return ch;
+}
+
+
+LOCAL(unsigned int)
+read_pbm_integer (j_compress_ptr cinfo, FILE * infile)
+/* Read an unsigned decimal integer from the PPM file */
+/* Swallows one trailing character after the integer */
+/* Note that on a 16-bit-int machine, only values up to 64k can be read. */
+/* This should not be a problem in practice. */
+{
+  register int ch;
+  register unsigned int val;
+
+  /* Skip any leading whitespace */
+  do {
+    ch = pbm_getc(infile);
+    if (ch == EOF)
+      ERREXIT(cinfo, JERR_INPUT_EOF);
+  } while (ch == ' ' || ch == '\t' || ch == '\n' || ch == '\r');
+
+  if (ch < '0' || ch > '9')
+    ERREXIT(cinfo, JERR_PPM_NONNUMERIC);
+
+  val = ch - '0';
+  while ((ch = pbm_getc(infile)) >= '0' && ch <= '9') {
+    val *= 10;
+    val += ch - '0';
+  }
+  return val;
+}
+
+
+/*
+ * Read one row of pixels.
+ *
+ * We provide several different versions depending on input file format.
+ * In all cases, input is scaled to the size of JSAMPLE.
+ *
+ * A really fast path is provided for reading byte/sample raw files with
+ * maxval = MAXJSAMPLE, which is the normal case for 8-bit data.
+ */
+
+
+METHODDEF(JDIMENSION)
+get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading text-format PGM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  FILE * infile = source->pub.input_file;
+  register JSAMPROW ptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading text-format PPM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  FILE * infile = source->pub.input_file;
+  register JSAMPROW ptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-byte-format PGM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register U_CHAR * bufferptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  ptr = source->pub.buffer[0];
+  bufferptr = source->iobuffer;
+  for (col = cinfo->image_width; col > 0; col--) {
+    *ptr++ = rescale[UCH(*bufferptr++)];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-byte-format PPM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register U_CHAR * bufferptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  ptr = source->pub.buffer[0];
+  bufferptr = source->iobuffer;
+  for (col = cinfo->image_width; col > 0; col--) {
+    *ptr++ = rescale[UCH(*bufferptr++)];
+    *ptr++ = rescale[UCH(*bufferptr++)];
+    *ptr++ = rescale[UCH(*bufferptr++)];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_raw_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-byte-format files with maxval = MAXJSAMPLE.
+ * In this case we just read right into the JSAMPLE buffer!
+ * Note that same code works for PPM and PGM files.
+ */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-word-format PGM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register U_CHAR * bufferptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  ptr = source->pub.buffer[0];
+  bufferptr = source->iobuffer;
+  for (col = cinfo->image_width; col > 0; col--) {
+    register int temp;
+    temp  = UCH(*bufferptr++);
+    temp |= UCH(*bufferptr++) << 8;
+    *ptr++ = rescale[temp];
+  }
+  return 1;
+}
+
+
+METHODDEF(JDIMENSION)
+get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading raw-word-format PPM files with any maxval */
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register U_CHAR * bufferptr;
+  register JSAMPLE *rescale = source->rescale;
+  JDIMENSION col;
+
+  if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+  ptr = source->pub.buffer[0];
+  bufferptr = source->iobuffer;
+  for (col = cinfo->image_width; col > 0; col--) {
+    register int temp;
+    temp  = UCH(*bufferptr++);
+    temp |= UCH(*bufferptr++) << 8;
+    *ptr++ = rescale[temp];
+    temp  = UCH(*bufferptr++);
+    temp |= UCH(*bufferptr++) << 8;
+    *ptr++ = rescale[temp];
+    temp  = UCH(*bufferptr++);
+    temp |= UCH(*bufferptr++) << 8;
+    *ptr++ = rescale[temp];
+  }
+  return 1;
+}
+
+
+/*
+ * Read the file header; return image size and component count.
+ */
+
+METHODDEF(void)
+start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  ppm_source_ptr source = (ppm_source_ptr) sinfo;
+  int c;
+  unsigned int w, h, maxval;
+  boolean need_iobuffer, use_raw_buffer, need_rescale;
+
+  if (getc(source->pub.input_file) != 'P')
+    ERREXIT(cinfo, JERR_PPM_NOT);
+
+  c = getc(source->pub.input_file); /* subformat discriminator character */
+
+  /* detect unsupported variants (ie, PBM) before trying to read header */
+  switch (c) {
+  case '2':			/* it's a text-format PGM file */
+  case '3':			/* it's a text-format PPM file */
+  case '5':			/* it's a raw-format PGM file */
+  case '6':			/* it's a raw-format PPM file */
+    break;
+  default:
+    ERREXIT(cinfo, JERR_PPM_NOT);
+    break;
+  }
+
+  /* fetch the remaining header info */
+  w = read_pbm_integer(cinfo, source->pub.input_file);
+  h = read_pbm_integer(cinfo, source->pub.input_file);
+  maxval = read_pbm_integer(cinfo, source->pub.input_file);
+
+  if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
+    ERREXIT(cinfo, JERR_PPM_NOT);
+
+  cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */
+  cinfo->image_width = (JDIMENSION) w;
+  cinfo->image_height = (JDIMENSION) h;
+
+  /* initialize flags to most common settings */
+  need_iobuffer = TRUE;		/* do we need an I/O buffer? */
+  use_raw_buffer = FALSE;	/* do we map input buffer onto I/O buffer? */
+  need_rescale = TRUE;		/* do we need a rescale array? */
+
+  switch (c) {
+  case '2':			/* it's a text-format PGM file */
+    cinfo->input_components = 1;
+    cinfo->in_color_space = JCS_GRAYSCALE;
+    TRACEMS2(cinfo, 1, JTRC_PGM_TEXT, w, h);
+    source->pub.get_pixel_rows = get_text_gray_row;
+    need_iobuffer = FALSE;
+    break;
+
+  case '3':			/* it's a text-format PPM file */
+    cinfo->input_components = 3;
+    cinfo->in_color_space = JCS_RGB;
+    TRACEMS2(cinfo, 1, JTRC_PPM_TEXT, w, h);
+    source->pub.get_pixel_rows = get_text_rgb_row;
+    need_iobuffer = FALSE;
+    break;
+
+  case '5':			/* it's a raw-format PGM file */
+    cinfo->input_components = 1;
+    cinfo->in_color_space = JCS_GRAYSCALE;
+    TRACEMS2(cinfo, 1, JTRC_PGM, w, h);
+    if (maxval > 255) {
+      source->pub.get_pixel_rows = get_word_gray_row;
+    } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) {
+      source->pub.get_pixel_rows = get_raw_row;
+      use_raw_buffer = TRUE;
+      need_rescale = FALSE;
+    } else {
+      source->pub.get_pixel_rows = get_scaled_gray_row;
+    }
+    break;
+
+  case '6':			/* it's a raw-format PPM file */
+    cinfo->input_components = 3;
+    cinfo->in_color_space = JCS_RGB;
+    TRACEMS2(cinfo, 1, JTRC_PPM, w, h);
+    if (maxval > 255) {
+      source->pub.get_pixel_rows = get_word_rgb_row;
+    } else if (maxval == MAXJSAMPLE && SIZEOF(JSAMPLE) == SIZEOF(U_CHAR)) {
+      source->pub.get_pixel_rows = get_raw_row;
+      use_raw_buffer = TRUE;
+      need_rescale = FALSE;
+    } else {
+      source->pub.get_pixel_rows = get_scaled_rgb_row;
+    }
+    break;
+  }
+
+  /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */
+  if (need_iobuffer) {
+    source->buffer_width = (size_t) w * cinfo->input_components *
+      ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR)));
+    source->iobuffer = (U_CHAR *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  source->buffer_width);
+  }
+
+  /* Create compressor input buffer. */
+  if (use_raw_buffer) {
+    /* For unscaled raw-input case, we can just map it onto the I/O buffer. */
+    /* Synthesize a JSAMPARRAY pointer structure */
+    /* Cast here implies near->far pointer conversion on PCs */
+    source->pixrow = (JSAMPROW) source->iobuffer;
+    source->pub.buffer = & source->pixrow;
+    source->pub.buffer_height = 1;
+  } else {
+    /* Need to translate anyway, so make a separate sample buffer. */
+    source->pub.buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) w * cinfo->input_components, (JDIMENSION) 1);
+    source->pub.buffer_height = 1;
+  }
+
+  /* Compute the rescaling array if required. */
+  if (need_rescale) {
+    INT32 val, half_maxval;
+
+    /* On 16-bit-int machines we have to be careful of maxval = 65535 */
+    source->rescale = (JSAMPLE *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE)));
+    half_maxval = maxval / 2;
+    for (val = 0; val <= (INT32) maxval; val++) {
+      /* The multiplication here must be done in 32 bits to avoid overflow */
+      source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval);
+    }
+  }
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  /* no work */
+}
+
+
+/*
+ * The module selection routine for PPM format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_ppm (j_compress_ptr cinfo)
+{
+  ppm_source_ptr source;
+
+  /* Create module interface object */
+  source = (ppm_source_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(ppm_source_struct));
+  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
+  source->pub.start_input = start_input_ppm;
+  source->pub.finish_input = finish_input_ppm;
+
+  return (cjpeg_source_ptr) source;
+}
+
+#endif /* PPM_SUPPORTED */
diff --git a/common/jpeg/rdswitch.c b/common/jpeg/rdswitch.c
new file mode 100644
index 0000000..4f4bb4f
--- /dev/null
+++ b/common/jpeg/rdswitch.c
@@ -0,0 +1,332 @@
+/*
+ * rdswitch.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to process some of cjpeg's more complicated
+ * command-line switches.  Switches processed here are:
+ *	-qtables file		Read quantization tables from text file
+ *	-scans file		Read scan script from text file
+ *	-qslots N[,N,...]	Set component quantization table selectors
+ *	-sample HxV[,HxV,...]	Set component sampling factors
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include <ctype.h>		/* to declare isdigit(), isspace() */
+
+
+LOCAL(int)
+text_getc (FILE * file)
+/* Read next char, skipping over any comments (# to end of line) */
+/* A comment/newline sequence is returned as a newline */
+{
+  register int ch;
+  
+  ch = getc(file);
+  if (ch == '#') {
+    do {
+      ch = getc(file);
+    } while (ch != '\n' && ch != EOF);
+  }
+  return ch;
+}
+
+
+LOCAL(boolean)
+read_text_integer (FILE * file, long * result, int * termchar)
+/* Read an unsigned decimal integer from a file, store it in result */
+/* Reads one trailing character after the integer; returns it in termchar */
+{
+  register int ch;
+  register long val;
+  
+  /* Skip any leading whitespace, detect EOF */
+  do {
+    ch = text_getc(file);
+    if (ch == EOF) {
+      *termchar = ch;
+      return FALSE;
+    }
+  } while (isspace(ch));
+  
+  if (! isdigit(ch)) {
+    *termchar = ch;
+    return FALSE;
+  }
+
+  val = ch - '0';
+  while ((ch = text_getc(file)) != EOF) {
+    if (! isdigit(ch))
+      break;
+    val *= 10;
+    val += ch - '0';
+  }
+  *result = val;
+  *termchar = ch;
+  return TRUE;
+}
+
+
+GLOBAL(boolean)
+read_quant_tables (j_compress_ptr cinfo, char * filename,
+		   int scale_factor, boolean force_baseline)
+/* Read a set of quantization tables from the specified file.
+ * The file is plain ASCII text: decimal numbers with whitespace between.
+ * Comments preceded by '#' may be included in the file.
+ * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values.
+ * The tables are implicitly numbered 0,1,etc.
+ * NOTE: does not affect the qslots mapping, which will default to selecting
+ * table 0 for luminance (or primary) components, 1 for chrominance components.
+ * You must use -qslots if you want a different component->table mapping.
+ */
+{
+  FILE * fp;
+  int tblno, i, termchar;
+  long val;
+  unsigned int table[DCTSIZE2];
+
+  if ((fp = fopen(filename, "r")) == NULL) {
+    fprintf(stderr, "Can't open table file %s\n", filename);
+    return FALSE;
+  }
+  tblno = 0;
+
+  while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */
+    if (tblno >= NUM_QUANT_TBLS) {
+      fprintf(stderr, "Too many tables in file %s\n", filename);
+      fclose(fp);
+      return FALSE;
+    }
+    table[0] = (unsigned int) val;
+    for (i = 1; i < DCTSIZE2; i++) {
+      if (! read_text_integer(fp, &val, &termchar)) {
+	fprintf(stderr, "Invalid table data in file %s\n", filename);
+	fclose(fp);
+	return FALSE;
+      }
+      table[i] = (unsigned int) val;
+    }
+    jpeg_add_quant_table(cinfo, tblno, table, scale_factor, force_baseline);
+    tblno++;
+  }
+
+  if (termchar != EOF) {
+    fprintf(stderr, "Non-numeric data in file %s\n", filename);
+    fclose(fp);
+    return FALSE;
+  }
+
+  fclose(fp);
+  return TRUE;
+}
+
+
+#ifdef C_MULTISCAN_FILES_SUPPORTED
+
+LOCAL(boolean)
+read_scan_integer (FILE * file, long * result, int * termchar)
+/* Variant of read_text_integer that always looks for a non-space termchar;
+ * this simplifies parsing of punctuation in scan scripts.
+ */
+{
+  register int ch;
+
+  if (! read_text_integer(file, result, termchar))
+    return FALSE;
+  ch = *termchar;
+  while (ch != EOF && isspace(ch))
+    ch = text_getc(file);
+  if (isdigit(ch)) {		/* oops, put it back */
+    if (ungetc(ch, file) == EOF)
+      return FALSE;
+    ch = ' ';
+  } else {
+    /* Any separators other than ';' and ':' are ignored;
+     * this allows user to insert commas, etc, if desired.
+     */
+    if (ch != EOF && ch != ';' && ch != ':')
+      ch = ' ';
+  }
+  *termchar = ch;
+  return TRUE;
+}
+
+
+GLOBAL(boolean)
+read_scan_script (j_compress_ptr cinfo, char * filename)
+/* Read a scan script from the specified text file.
+ * Each entry in the file defines one scan to be emitted.
+ * Entries are separated by semicolons ';'.
+ * An entry contains one to four component indexes,
+ * optionally followed by a colon ':' and four progressive-JPEG parameters.
+ * The component indexes denote which component(s) are to be transmitted
+ * in the current scan.  The first component has index 0.
+ * Sequential JPEG is used if the progressive-JPEG parameters are omitted.
+ * The file is free format text: any whitespace may appear between numbers
+ * and the ':' and ';' punctuation marks.  Also, other punctuation (such
+ * as commas or dashes) can be placed between numbers if desired.
+ * Comments preceded by '#' may be included in the file.
+ * Note: we do very little validity checking here;
+ * jcmaster.c will validate the script parameters.
+ */
+{
+  FILE * fp;
+  int scanno, ncomps, termchar;
+  long val;
+  jpeg_scan_info * scanptr;
+#define MAX_SCANS  100		/* quite arbitrary limit */
+  jpeg_scan_info scans[MAX_SCANS];
+
+  if ((fp = fopen(filename, "r")) == NULL) {
+    fprintf(stderr, "Can't open scan definition file %s\n", filename);
+    return FALSE;
+  }
+  scanptr = scans;
+  scanno = 0;
+
+  while (read_scan_integer(fp, &val, &termchar)) {
+    if (scanno >= MAX_SCANS) {
+      fprintf(stderr, "Too many scans defined in file %s\n", filename);
+      fclose(fp);
+      return FALSE;
+    }
+    scanptr->component_index[0] = (int) val;
+    ncomps = 1;
+    while (termchar == ' ') {
+      if (ncomps >= MAX_COMPS_IN_SCAN) {
+	fprintf(stderr, "Too many components in one scan in file %s\n",
+		filename);
+	fclose(fp);
+	return FALSE;
+      }
+      if (! read_scan_integer(fp, &val, &termchar))
+	goto bogus;
+      scanptr->component_index[ncomps] = (int) val;
+      ncomps++;
+    }
+    scanptr->comps_in_scan = ncomps;
+    if (termchar == ':') {
+      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
+	goto bogus;
+      scanptr->Ss = (int) val;
+      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
+	goto bogus;
+      scanptr->Se = (int) val;
+      if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ')
+	goto bogus;
+      scanptr->Ah = (int) val;
+      if (! read_scan_integer(fp, &val, &termchar))
+	goto bogus;
+      scanptr->Al = (int) val;
+    } else {
+      /* set non-progressive parameters */
+      scanptr->Ss = 0;
+      scanptr->Se = DCTSIZE2-1;
+      scanptr->Ah = 0;
+      scanptr->Al = 0;
+    }
+    if (termchar != ';' && termchar != EOF) {
+bogus:
+      fprintf(stderr, "Invalid scan entry format in file %s\n", filename);
+      fclose(fp);
+      return FALSE;
+    }
+    scanptr++, scanno++;
+  }
+
+  if (termchar != EOF) {
+    fprintf(stderr, "Non-numeric data in file %s\n", filename);
+    fclose(fp);
+    return FALSE;
+  }
+
+  if (scanno > 0) {
+    /* Stash completed scan list in cinfo structure.
+     * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data,
+     * but if you want to compress multiple images you'd want JPOOL_PERMANENT.
+     */
+    scanptr = (jpeg_scan_info *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  scanno * SIZEOF(jpeg_scan_info));
+    MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info));
+    cinfo->scan_info = scanptr;
+    cinfo->num_scans = scanno;
+  }
+
+  fclose(fp);
+  return TRUE;
+}
+
+#endif /* C_MULTISCAN_FILES_SUPPORTED */
+
+
+GLOBAL(boolean)
+set_quant_slots (j_compress_ptr cinfo, char *arg)
+/* Process a quantization-table-selectors parameter string, of the form
+ *     N[,N,...]
+ * If there are more components than parameters, the last value is replicated.
+ */
+{
+  int val = 0;			/* default table # */
+  int ci;
+  char ch;
+
+  for (ci = 0; ci < MAX_COMPONENTS; ci++) {
+    if (*arg) {
+      ch = ',';			/* if not set by sscanf, will be ',' */
+      if (sscanf(arg, "%d%c", &val, &ch) < 1)
+	return FALSE;
+      if (ch != ',')		/* syntax check */
+	return FALSE;
+      if (val < 0 || val >= NUM_QUANT_TBLS) {
+	fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n",
+		NUM_QUANT_TBLS-1);
+	return FALSE;
+      }
+      cinfo->comp_info[ci].quant_tbl_no = val;
+      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
+	;
+    } else {
+      /* reached end of parameter, set remaining components to last table */
+      cinfo->comp_info[ci].quant_tbl_no = val;
+    }
+  }
+  return TRUE;
+}
+
+
+GLOBAL(boolean)
+set_sample_factors (j_compress_ptr cinfo, char *arg)
+/* Process a sample-factors parameter string, of the form
+ *     HxV[,HxV,...]
+ * If there are more components than parameters, "1x1" is assumed for the rest.
+ */
+{
+  int ci, val1, val2;
+  char ch1, ch2;
+
+  for (ci = 0; ci < MAX_COMPONENTS; ci++) {
+    if (*arg) {
+      ch2 = ',';		/* if not set by sscanf, will be ',' */
+      if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3)
+	return FALSE;
+      if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */
+	return FALSE;
+      if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) {
+	fprintf(stderr, "JPEG sampling factors must be 1..4\n");
+	return FALSE;
+      }
+      cinfo->comp_info[ci].h_samp_factor = val1;
+      cinfo->comp_info[ci].v_samp_factor = val2;
+      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
+	;
+    } else {
+      /* reached end of parameter, set remaining components to 1x1 sampling */
+      cinfo->comp_info[ci].h_samp_factor = 1;
+      cinfo->comp_info[ci].v_samp_factor = 1;
+    }
+  }
+  return TRUE;
+}
diff --git a/common/jpeg/rdtarga.c b/common/jpeg/rdtarga.c
new file mode 100644
index 0000000..4c2cd26
--- /dev/null
+++ b/common/jpeg/rdtarga.c
@@ -0,0 +1,500 @@
+/*
+ * rdtarga.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to read input images in Targa format.
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume input from
+ * an ordinary stdio stream.  They further assume that reading begins
+ * at the start of the file; start_input may need work if the
+ * user interface has already read some data (e.g., to determine that
+ * the file is indeed Targa format).
+ *
+ * Based on code contributed by Lee Daniel Crocker.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef TARGA_SUPPORTED
+
+
+/* Macros to deal with unsigned chars as efficiently as compiler allows */
+
+#ifdef HAVE_UNSIGNED_CHAR
+typedef unsigned char U_CHAR;
+#define UCH(x)	((int) (x))
+#else /* !HAVE_UNSIGNED_CHAR */
+#ifdef CHAR_IS_UNSIGNED
+typedef char U_CHAR;
+#define UCH(x)	((int) (x))
+#else
+typedef char U_CHAR;
+#define UCH(x)	((int) (x) & 0xFF)
+#endif
+#endif /* HAVE_UNSIGNED_CHAR */
+
+
+#define	ReadOK(file,buffer,len)	(JFREAD(file,buffer,len) == ((size_t) (len)))
+
+
+/* Private version of data source object */
+
+typedef struct _tga_source_struct * tga_source_ptr;
+
+typedef struct _tga_source_struct {
+  struct cjpeg_source_struct pub; /* public fields */
+
+  j_compress_ptr cinfo;		/* back link saves passing separate parm */
+
+  JSAMPARRAY colormap;		/* Targa colormap (converted to my format) */
+
+  jvirt_sarray_ptr whole_image;	/* Needed if funny input row order */
+  JDIMENSION current_row;	/* Current logical row number to read */
+
+  /* Pointer to routine to extract next Targa pixel from input file */
+  JMETHOD(void, read_pixel, (tga_source_ptr sinfo));
+
+  /* Result of read_pixel is delivered here: */
+  U_CHAR tga_pixel[4];
+
+  int pixel_size;		/* Bytes per Targa pixel (1 to 4) */
+
+  /* State info for reading RLE-coded pixels; both counts must be init to 0 */
+  int block_count;		/* # of pixels remaining in RLE block */
+  int dup_pixel_count;		/* # of times to duplicate previous pixel */
+
+  /* This saves the correct pixel-row-expansion method for preload_image */
+  JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
+				       cjpeg_source_ptr sinfo));
+} tga_source_struct;
+
+
+/* For expanding 5-bit pixel values to 8-bit with best rounding */
+
+static const UINT8 c5to8bits[32] = {
+    0,   8,  16,  25,  33,  41,  49,  58,
+   66,  74,  82,  90,  99, 107, 115, 123,
+  132, 140, 148, 156, 165, 173, 181, 189,
+  197, 206, 214, 222, 230, 239, 247, 255
+};
+
+
+
+LOCAL(int)
+read_byte (tga_source_ptr sinfo)
+/* Read next byte from Targa file */
+{
+  register FILE *infile = sinfo->pub.input_file;
+  register int c;
+
+  if ((c = getc(infile)) == EOF)
+    ERREXIT(sinfo->cinfo, JERR_INPUT_EOF);
+  return c;
+}
+
+
+LOCAL(void)
+read_colormap (tga_source_ptr sinfo, int cmaplen, int mapentrysize)
+/* Read the colormap from a Targa file */
+{
+  int i;
+
+  /* Presently only handles 24-bit BGR format */
+  if (mapentrysize != 24)
+    ERREXIT(sinfo->cinfo, JERR_TGA_BADCMAP);
+
+  for (i = 0; i < cmaplen; i++) {
+    sinfo->colormap[2][i] = (JSAMPLE) read_byte(sinfo);
+    sinfo->colormap[1][i] = (JSAMPLE) read_byte(sinfo);
+    sinfo->colormap[0][i] = (JSAMPLE) read_byte(sinfo);
+  }
+}
+
+
+/*
+ * read_pixel methods: get a single pixel from Targa file into tga_pixel[]
+ */
+
+METHODDEF(void)
+read_non_rle_pixel (tga_source_ptr sinfo)
+/* Read one Targa pixel from the input file; no RLE expansion */
+{
+  register FILE *infile = sinfo->pub.input_file;
+  register int i;
+
+  for (i = 0; i < sinfo->pixel_size; i++) {
+    sinfo->tga_pixel[i] = (U_CHAR) getc(infile);
+  }
+}
+
+
+METHODDEF(void)
+read_rle_pixel (tga_source_ptr sinfo)
+/* Read one Targa pixel from the input file, expanding RLE data as needed */
+{
+  register FILE *infile = sinfo->pub.input_file;
+  register int i;
+
+  /* Duplicate previously read pixel? */
+  if (sinfo->dup_pixel_count > 0) {
+    sinfo->dup_pixel_count--;
+    return;
+  }
+
+  /* Time to read RLE block header? */
+  if (--sinfo->block_count < 0) { /* decrement pixels remaining in block */
+    i = read_byte(sinfo);
+    if (i & 0x80) {		/* Start of duplicate-pixel block? */
+      sinfo->dup_pixel_count = i & 0x7F; /* number of dups after this one */
+      sinfo->block_count = 0;	/* then read new block header */
+    } else {
+      sinfo->block_count = i & 0x7F; /* number of pixels after this one */
+    }
+  }
+
+  /* Read next pixel */
+  for (i = 0; i < sinfo->pixel_size; i++) {
+    sinfo->tga_pixel[i] = (U_CHAR) getc(infile);
+  }
+}
+
+
+/*
+ * Read one row of pixels.
+ *
+ * We provide several different versions depending on input file format.
+ */
+
+
+METHODDEF(JDIMENSION)
+get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 8-bit grayscale pixels */
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+  
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
+    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]);
+  }
+  return 1;
+}
+
+METHODDEF(JDIMENSION)
+get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 8-bit colormap indexes */
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  register int t;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+  register JSAMPARRAY colormap = source->colormap;
+
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
+    t = UCH(source->tga_pixel[0]);
+    *ptr++ = colormap[0][t];
+    *ptr++ = colormap[1][t];
+    *ptr++ = colormap[2][t];
+  }
+  return 1;
+}
+
+METHODDEF(JDIMENSION)
+get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 16-bit pixels */
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  register int t;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+  
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
+    t = UCH(source->tga_pixel[0]);
+    t += UCH(source->tga_pixel[1]) << 8;
+    /* We expand 5 bit data to 8 bit sample width.
+     * The format of the 16-bit (LSB first) input word is
+     *     xRRRRRGGGGGBBBBB
+     */
+    ptr[2] = (JSAMPLE) c5to8bits[t & 0x1F];
+    t >>= 5;
+    ptr[1] = (JSAMPLE) c5to8bits[t & 0x1F];
+    t >>= 5;
+    ptr[0] = (JSAMPLE) c5to8bits[t & 0x1F];
+    ptr += 3;
+  }
+  return 1;
+}
+
+METHODDEF(JDIMENSION)
+get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 24-bit pixels */
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+  
+  ptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
+    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[2]); /* change BGR to RGB order */
+    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[1]);
+    *ptr++ = (JSAMPLE) UCH(source->tga_pixel[0]);
+  }
+  return 1;
+}
+
+/*
+ * Targa also defines a 32-bit pixel format with order B,G,R,A.
+ * We presently ignore the attribute byte, so the code for reading
+ * these pixels is identical to the 24-bit routine above.
+ * This works because the actual pixel length is only known to read_pixel.
+ */
+
+#define get_32bit_row  get_24bit_row
+
+
+/*
+ * This method is for re-reading the input data in standard top-down
+ * row order.  The entire image has already been read into whole_image
+ * with proper conversion of pixel format, but it's in a funny row order.
+ */
+
+METHODDEF(JDIMENSION)
+get_memory_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  JDIMENSION source_row;
+
+  /* Compute row of source that maps to current_row of normal order */
+  /* For now, assume image is bottom-up and not interlaced. */
+  /* NEEDS WORK to support interlaced images! */
+  source_row = cinfo->image_height - source->current_row - 1;
+
+  /* Fetch that row from virtual array */
+  source->pub.buffer = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->whole_image,
+     source_row, (JDIMENSION) 1, FALSE);
+
+  source->current_row++;
+  return 1;
+}
+
+
+/*
+ * This method loads the image into whole_image during the first call on
+ * get_pixel_rows.  The get_pixel_rows pointer is then adjusted to call
+ * get_memory_row on subsequent calls.
+ */
+
+METHODDEF(JDIMENSION)
+preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  JDIMENSION row;
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+
+  /* Read the data into a virtual array in input-file row order. */
+  for (row = 0; row < cinfo->image_height; row++) {
+    if (progress != NULL) {
+      progress->pub.pass_counter = (long) row;
+      progress->pub.pass_limit = (long) cinfo->image_height;
+      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+    }
+    source->pub.buffer = (*cinfo->mem->access_virt_sarray)
+      ((j_common_ptr) cinfo, source->whole_image, row, (JDIMENSION) 1, TRUE);
+    (*source->get_pixel_rows) (cinfo, sinfo);
+  }
+  if (progress != NULL)
+    progress->completed_extra_passes++;
+
+  /* Set up to read from the virtual array in unscrambled order */
+  source->pub.get_pixel_rows = get_memory_row;
+  source->current_row = 0;
+  /* And read the first row */
+  return get_memory_row(cinfo, sinfo);
+}
+
+
+/*
+ * Read the file header; return image size and component count.
+ */
+
+METHODDEF(void)
+start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  tga_source_ptr source = (tga_source_ptr) sinfo;
+  U_CHAR targaheader[18];
+  int idlen, cmaptype, subtype, flags, interlace_type, components;
+  unsigned int width, height, maplen;
+  boolean is_bottom_up;
+
+#define GET_2B(offset)	((unsigned int) UCH(targaheader[offset]) + \
+			 (((unsigned int) UCH(targaheader[offset+1])) << 8))
+
+  if (! ReadOK(source->pub.input_file, targaheader, 18))
+    ERREXIT(cinfo, JERR_INPUT_EOF);
+
+  /* Pretend "15-bit" pixels are 16-bit --- we ignore attribute bit anyway */
+  if (targaheader[16] == 15)
+    targaheader[16] = 16;
+
+  idlen = UCH(targaheader[0]);
+  cmaptype = UCH(targaheader[1]);
+  subtype = UCH(targaheader[2]);
+  maplen = GET_2B(5);
+  width = GET_2B(12);
+  height = GET_2B(14);
+  source->pixel_size = UCH(targaheader[16]) >> 3;
+  flags = UCH(targaheader[17]);	/* Image Descriptor byte */
+
+  is_bottom_up = ((flags & 0x20) == 0);	/* bit 5 set => top-down */
+  interlace_type = flags >> 6;	/* bits 6/7 are interlace code */
+
+  if (cmaptype > 1 ||		/* cmaptype must be 0 or 1 */
+      source->pixel_size < 1 || source->pixel_size > 4 ||
+      (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */
+      interlace_type != 0)	/* currently don't allow interlaced image */
+    ERREXIT(cinfo, JERR_TGA_BADPARMS);
+  
+  if (subtype > 8) {
+    /* It's an RLE-coded file */
+    source->read_pixel = read_rle_pixel;
+    source->block_count = source->dup_pixel_count = 0;
+    subtype -= 8;
+  } else {
+    /* Non-RLE file */
+    source->read_pixel = read_non_rle_pixel;
+  }
+
+  /* Now should have subtype 1, 2, or 3 */
+  components = 3;		/* until proven different */
+  cinfo->in_color_space = JCS_RGB;
+
+  switch (subtype) {
+  case 1:			/* Colormapped image */
+    if (source->pixel_size == 1 && cmaptype == 1)
+      source->get_pixel_rows = get_8bit_row;
+    else
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
+    TRACEMS2(cinfo, 1, JTRC_TGA_MAPPED, width, height);
+    break;
+  case 2:			/* RGB image */
+    switch (source->pixel_size) {
+    case 2:
+      source->get_pixel_rows = get_16bit_row;
+      break;
+    case 3:
+      source->get_pixel_rows = get_24bit_row;
+      break;
+    case 4:
+      source->get_pixel_rows = get_32bit_row;
+      break;
+    default:
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
+      break;
+    }
+    TRACEMS2(cinfo, 1, JTRC_TGA, width, height);
+    break;
+  case 3:			/* Grayscale image */
+    components = 1;
+    cinfo->in_color_space = JCS_GRAYSCALE;
+    if (source->pixel_size == 1)
+      source->get_pixel_rows = get_8bit_gray_row;
+    else
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
+    TRACEMS2(cinfo, 1, JTRC_TGA_GRAY, width, height);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_TGA_BADPARMS);
+    break;
+  }
+
+  if (is_bottom_up) {
+    /* Create a virtual array to buffer the upside-down image. */
+    source->whole_image = (*cinfo->mem->request_virt_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+       (JDIMENSION) width * components, (JDIMENSION) height, (JDIMENSION) 1);
+    if (cinfo->progress != NULL) {
+      cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+      progress->total_extra_passes++; /* count file input as separate pass */
+    }
+    /* source->pub.buffer will point to the virtual array. */
+    source->pub.buffer_height = 1; /* in case anyone looks at it */
+    source->pub.get_pixel_rows = preload_image;
+  } else {
+    /* Don't need a virtual array, but do need a one-row input buffer. */
+    source->whole_image = NULL;
+    source->pub.buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) width * components, (JDIMENSION) 1);
+    source->pub.buffer_height = 1;
+    source->pub.get_pixel_rows = source->get_pixel_rows;
+  }
+  
+  while (idlen--)		/* Throw away ID field */
+    (void) read_byte(source);
+
+  if (maplen > 0) {
+    if (maplen > 256 || GET_2B(3) != 0)
+      ERREXIT(cinfo, JERR_TGA_BADCMAP);
+    /* Allocate space to store the colormap */
+    source->colormap = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3);
+    /* and read it from the file */
+    read_colormap(source, (int) maplen, UCH(targaheader[7]));
+  } else {
+    if (cmaptype)		/* but you promised a cmap! */
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
+    source->colormap = NULL;
+  }
+
+  cinfo->input_components = components;
+  cinfo->data_precision = 8;
+  cinfo->image_width = width;
+  cinfo->image_height = height;
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+{
+  /* no work */
+}
+
+
+/*
+ * The module selection routine for Targa format input.
+ */
+
+GLOBAL(cjpeg_source_ptr)
+jinit_read_targa (j_compress_ptr cinfo)
+{
+  tga_source_ptr source;
+
+  /* Create module interface object */
+  source = (tga_source_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(tga_source_struct));
+  source->cinfo = cinfo;	/* make back link for subroutines */
+  /* Fill in method ptrs, except get_pixel_rows which start_input sets */
+  source->pub.start_input = start_input_tga;
+  source->pub.finish_input = finish_input_tga;
+
+  return (cjpeg_source_ptr) source;
+}
+
+#endif /* TARGA_SUPPORTED */
diff --git a/common/jpeg/wrbmp.c b/common/jpeg/wrbmp.c
new file mode 100644
index 0000000..3283b0f
--- /dev/null
+++ b/common/jpeg/wrbmp.c
@@ -0,0 +1,442 @@
+/*
+ * wrbmp.c
+ *
+ * Copyright (C) 1994-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in Microsoft "BMP"
+ * format (MS Windows 3.x and OS/2 1.x flavors).
+ * Either 8-bit colormapped or 24-bit full-color format can be written.
+ * No compression is supported.
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ *
+ * This code contributed by James Arthur Boucher.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef BMP_SUPPORTED
+
+
+/*
+ * To support 12-bit JPEG data, we'd have to scale output down to 8 bits.
+ * This is not yet implemented.
+ */
+
+#if BITS_IN_JSAMPLE != 8
+  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
+#endif
+
+/*
+ * Since BMP stores scanlines bottom-to-top, we have to invert the image
+ * from JPEG's top-to-bottom order.  To do this, we save the outgoing data
+ * in a virtual array during put_pixel_row calls, then actually emit the
+ * BMP file during finish_output.  The virtual array contains one JSAMPLE per
+ * pixel if the output is grayscale or colormapped, three if it is full color.
+ */
+
+/* Private version of data destination object */
+
+typedef struct {
+  struct djpeg_dest_struct pub;	/* public fields */
+
+  boolean is_os2;		/* saves the OS2 format request flag */
+
+  jvirt_sarray_ptr whole_image;	/* needed to reverse row order */
+  JDIMENSION data_width;	/* JSAMPLEs per row */
+  JDIMENSION row_width;		/* physical width of one row in the BMP file */
+  int pad_bytes;		/* number of padding bytes needed per row */
+  JDIMENSION cur_output_row;	/* next row# to write to virtual array */
+} bmp_dest_struct;
+
+typedef bmp_dest_struct * bmp_dest_ptr;
+
+
+/* Forward declarations */
+LOCAL(void) write_colormap
+	JPP((j_decompress_ptr cinfo, bmp_dest_ptr dest,
+	     int map_colors, int map_entry_size));
+
+
+/*
+ * Write some pixel data.
+ * In this module rows_supplied will always be 1.
+ */
+
+METHODDEF(void)
+put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		JDIMENSION rows_supplied)
+/* This version is for writing 24-bit pixels */
+{
+  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+  int pad;
+
+  /* Access next row in virtual array */
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, dest->whole_image,
+     dest->cur_output_row, (JDIMENSION) 1, TRUE);
+  dest->cur_output_row++;
+
+  /* Transfer data.  Note destination values must be in BGR order
+   * (even though Microsoft's own documents say the opposite).
+   */
+  inptr = dest->pub.buffer[0];
+  outptr = image_ptr[0];
+  for (col = cinfo->output_width; col > 0; col--) {
+    outptr[2] = *inptr++;	/* can omit GETJSAMPLE() safely */
+    outptr[1] = *inptr++;
+    outptr[0] = *inptr++;
+    outptr += 3;
+  }
+
+  /* Zero out the pad bytes. */
+  pad = dest->pad_bytes;
+  while (--pad >= 0)
+    *outptr++ = 0;
+}
+
+METHODDEF(void)
+put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+	       JDIMENSION rows_supplied)
+/* This version is for grayscale OR quantized color output */
+{
+  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+  int pad;
+
+  /* Access next row in virtual array */
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, dest->whole_image,
+     dest->cur_output_row, (JDIMENSION) 1, TRUE);
+  dest->cur_output_row++;
+
+  /* Transfer data. */
+  inptr = dest->pub.buffer[0];
+  outptr = image_ptr[0];
+  for (col = cinfo->output_width; col > 0; col--) {
+    *outptr++ = *inptr++;	/* can omit GETJSAMPLE() safely */
+  }
+
+  /* Zero out the pad bytes. */
+  pad = dest->pad_bytes;
+  while (--pad >= 0)
+    *outptr++ = 0;
+}
+
+
+/*
+ * Startup: normally writes the file header.
+ * In this module we may as well postpone everything until finish_output.
+ */
+
+METHODDEF(void)
+start_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  /* no work here */
+}
+
+
+/*
+ * Finish up at the end of the file.
+ *
+ * Here is where we really output the BMP file.
+ *
+ * First, routines to write the Windows and OS/2 variants of the file header.
+ */
+
+LOCAL(void)
+write_bmp_header (j_decompress_ptr cinfo, bmp_dest_ptr dest)
+/* Write a Windows-style BMP file header, including colormap if needed */
+{
+  char bmpfileheader[14];
+  char bmpinfoheader[40];
+#define PUT_2B(array,offset,value)  \
+	(array[offset] = (char) ((value) & 0xFF), \
+	 array[offset+1] = (char) (((value) >> 8) & 0xFF))
+#define PUT_4B(array,offset,value)  \
+	(array[offset] = (char) ((value) & 0xFF), \
+	 array[offset+1] = (char) (((value) >> 8) & 0xFF), \
+	 array[offset+2] = (char) (((value) >> 16) & 0xFF), \
+	 array[offset+3] = (char) (((value) >> 24) & 0xFF))
+  INT32 headersize, bfSize;
+  int bits_per_pixel, cmap_entries;
+
+  /* Compute colormap size and total file size */
+  if (cinfo->out_color_space == JCS_RGB) {
+    if (cinfo->quantize_colors) {
+      /* Colormapped RGB */
+      bits_per_pixel = 8;
+      cmap_entries = 256;
+    } else {
+      /* Unquantized, full color RGB */
+      bits_per_pixel = 24;
+      cmap_entries = 0;
+    }
+  } else {
+    /* Grayscale output.  We need to fake a 256-entry colormap. */
+    bits_per_pixel = 8;
+    cmap_entries = 256;
+  }
+  /* File size */
+  headersize = 14 + 40 + cmap_entries * 4; /* Header and colormap */
+  bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height;
+  
+  /* Set unused fields of header to 0 */
+  MEMZERO(bmpfileheader, SIZEOF(bmpfileheader));
+  MEMZERO(bmpinfoheader, SIZEOF(bmpinfoheader));
+
+  /* Fill the file header */
+  bmpfileheader[0] = 0x42;	/* first 2 bytes are ASCII 'B', 'M' */
+  bmpfileheader[1] = 0x4D;
+  PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */
+  /* we leave bfReserved1 & bfReserved2 = 0 */
+  PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */
+
+  /* Fill the info header (Microsoft calls this a BITMAPINFOHEADER) */
+  PUT_2B(bmpinfoheader, 0, 40);	/* biSize */
+  PUT_4B(bmpinfoheader, 4, cinfo->output_width); /* biWidth */
+  PUT_4B(bmpinfoheader, 8, cinfo->output_height); /* biHeight */
+  PUT_2B(bmpinfoheader, 12, 1);	/* biPlanes - must be 1 */
+  PUT_2B(bmpinfoheader, 14, bits_per_pixel); /* biBitCount */
+  /* we leave biCompression = 0, for none */
+  /* we leave biSizeImage = 0; this is correct for uncompressed data */
+  if (cinfo->density_unit == 2) { /* if have density in dots/cm, then */
+    PUT_4B(bmpinfoheader, 24, (INT32) (cinfo->X_density*100)); /* XPels/M */
+    PUT_4B(bmpinfoheader, 28, (INT32) (cinfo->Y_density*100)); /* XPels/M */
+  }
+  PUT_2B(bmpinfoheader, 32, cmap_entries); /* biClrUsed */
+  /* we leave biClrImportant = 0 */
+
+  if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+  if (JFWRITE(dest->pub.output_file, bmpinfoheader, 40) != (size_t) 40)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+
+  if (cmap_entries > 0)
+    write_colormap(cinfo, dest, cmap_entries, 4);
+}
+
+
+LOCAL(void)
+write_os2_header (j_decompress_ptr cinfo, bmp_dest_ptr dest)
+/* Write an OS2-style BMP file header, including colormap if needed */
+{
+  char bmpfileheader[14];
+  char bmpcoreheader[12];
+  INT32 headersize, bfSize;
+  int bits_per_pixel, cmap_entries;
+
+  /* Compute colormap size and total file size */
+  if (cinfo->out_color_space == JCS_RGB) {
+    if (cinfo->quantize_colors) {
+      /* Colormapped RGB */
+      bits_per_pixel = 8;
+      cmap_entries = 256;
+    } else {
+      /* Unquantized, full color RGB */
+      bits_per_pixel = 24;
+      cmap_entries = 0;
+    }
+  } else {
+    /* Grayscale output.  We need to fake a 256-entry colormap. */
+    bits_per_pixel = 8;
+    cmap_entries = 256;
+  }
+  /* File size */
+  headersize = 14 + 12 + cmap_entries * 3; /* Header and colormap */
+  bfSize = headersize + (INT32) dest->row_width * (INT32) cinfo->output_height;
+  
+  /* Set unused fields of header to 0 */
+  MEMZERO(bmpfileheader, SIZEOF(bmpfileheader));
+  MEMZERO(bmpcoreheader, SIZEOF(bmpcoreheader));
+
+  /* Fill the file header */
+  bmpfileheader[0] = 0x42;	/* first 2 bytes are ASCII 'B', 'M' */
+  bmpfileheader[1] = 0x4D;
+  PUT_4B(bmpfileheader, 2, bfSize); /* bfSize */
+  /* we leave bfReserved1 & bfReserved2 = 0 */
+  PUT_4B(bmpfileheader, 10, headersize); /* bfOffBits */
+
+  /* Fill the info header (Microsoft calls this a BITMAPCOREHEADER) */
+  PUT_2B(bmpcoreheader, 0, 12);	/* bcSize */
+  PUT_2B(bmpcoreheader, 4, cinfo->output_width); /* bcWidth */
+  PUT_2B(bmpcoreheader, 6, cinfo->output_height); /* bcHeight */
+  PUT_2B(bmpcoreheader, 8, 1);	/* bcPlanes - must be 1 */
+  PUT_2B(bmpcoreheader, 10, bits_per_pixel); /* bcBitCount */
+
+  if (JFWRITE(dest->pub.output_file, bmpfileheader, 14) != (size_t) 14)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+  if (JFWRITE(dest->pub.output_file, bmpcoreheader, 12) != (size_t) 12)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+
+  if (cmap_entries > 0)
+    write_colormap(cinfo, dest, cmap_entries, 3);
+}
+
+
+/*
+ * Write the colormap.
+ * Windows uses BGR0 map entries; OS/2 uses BGR entries.
+ */
+
+LOCAL(void)
+write_colormap (j_decompress_ptr cinfo, bmp_dest_ptr dest,
+		int map_colors, int map_entry_size)
+{
+  JSAMPARRAY colormap = cinfo->colormap;
+  int num_colors = cinfo->actual_number_of_colors;
+  FILE * outfile = dest->pub.output_file;
+  int i;
+
+  if (colormap != NULL) {
+    if (cinfo->out_color_components == 3) {
+      /* Normal case with RGB colormap */
+      for (i = 0; i < num_colors; i++) {
+	putc(GETJSAMPLE(colormap[2][i]), outfile);
+	putc(GETJSAMPLE(colormap[1][i]), outfile);
+	putc(GETJSAMPLE(colormap[0][i]), outfile);
+	if (map_entry_size == 4)
+	  putc(0, outfile);
+      }
+    } else {
+      /* Grayscale colormap (only happens with grayscale quantization) */
+      for (i = 0; i < num_colors; i++) {
+	putc(GETJSAMPLE(colormap[0][i]), outfile);
+	putc(GETJSAMPLE(colormap[0][i]), outfile);
+	putc(GETJSAMPLE(colormap[0][i]), outfile);
+	if (map_entry_size == 4)
+	  putc(0, outfile);
+      }
+    }
+  } else {
+    /* If no colormap, must be grayscale data.  Generate a linear "map". */
+    for (i = 0; i < 256; i++) {
+      putc(i, outfile);
+      putc(i, outfile);
+      putc(i, outfile);
+      if (map_entry_size == 4)
+	putc(0, outfile);
+    }
+  }
+  /* Pad colormap with zeros to ensure specified number of colormap entries */ 
+  if (i > map_colors)
+    ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, i);
+  for (; i < map_colors; i++) {
+    putc(0, outfile);
+    putc(0, outfile);
+    putc(0, outfile);
+    if (map_entry_size == 4)
+      putc(0, outfile);
+  }
+}
+
+
+METHODDEF(void)
+finish_output_bmp (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  bmp_dest_ptr dest = (bmp_dest_ptr) dinfo;
+  register FILE * outfile = dest->pub.output_file;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW data_ptr;
+  JDIMENSION row;
+  register JDIMENSION col;
+  cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+
+  /* Write the header and colormap */
+  if (dest->is_os2)
+    write_os2_header(cinfo, dest);
+  else
+    write_bmp_header(cinfo, dest);
+
+  /* Write the file body from our virtual array */
+  for (row = cinfo->output_height; row > 0; row--) {
+    if (progress != NULL) {
+      progress->pub.pass_counter = (long) (cinfo->output_height - row);
+      progress->pub.pass_limit = (long) cinfo->output_height;
+      (*progress->pub.progress_monitor) ((j_common_ptr) cinfo);
+    }
+    image_ptr = (*cinfo->mem->access_virt_sarray)
+      ((j_common_ptr) cinfo, dest->whole_image, row-1, (JDIMENSION) 1, FALSE);
+    data_ptr = image_ptr[0];
+    for (col = dest->row_width; col > 0; col--) {
+      putc(GETJSAMPLE(*data_ptr), outfile);
+      data_ptr++;
+    }
+  }
+  if (progress != NULL)
+    progress->completed_extra_passes++;
+
+  /* Make sure we wrote the output file OK */
+  fflush(outfile);
+  if (ferror(outfile))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for BMP format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_bmp (j_decompress_ptr cinfo, boolean is_os2)
+{
+  bmp_dest_ptr dest;
+  JDIMENSION row_width;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (bmp_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(bmp_dest_struct));
+  dest->pub.start_output = start_output_bmp;
+  dest->pub.finish_output = finish_output_bmp;
+  dest->is_os2 = is_os2;
+
+  if (cinfo->out_color_space == JCS_GRAYSCALE) {
+    dest->pub.put_pixel_rows = put_gray_rows;
+  } else if (cinfo->out_color_space == JCS_RGB) {
+    if (cinfo->quantize_colors)
+      dest->pub.put_pixel_rows = put_gray_rows;
+    else
+      dest->pub.put_pixel_rows = put_pixel_rows;
+  } else {
+    ERREXIT(cinfo, JERR_BMP_COLORSPACE);
+  }
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  /* Determine width of rows in the BMP file (padded to 4-byte boundary). */
+  row_width = cinfo->output_width * cinfo->output_components;
+  dest->data_width = row_width;
+  while ((row_width & 3) != 0) row_width++;
+  dest->row_width = row_width;
+  dest->pad_bytes = (int) (row_width - dest->data_width);
+
+  /* Allocate space for inversion array, prepare for write pass */
+  dest->whole_image = (*cinfo->mem->request_virt_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
+     row_width, cinfo->output_height, (JDIMENSION) 1);
+  dest->cur_output_row = 0;
+  if (cinfo->progress != NULL) {
+    cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
+    progress->total_extra_passes++; /* count file input as separate pass */
+  }
+
+  /* Create decompressor output buffer. */
+  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, row_width, (JDIMENSION) 1);
+  dest->pub.buffer_height = 1;
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* BMP_SUPPORTED */
diff --git a/common/jpeg/wrgif.c b/common/jpeg/wrgif.c
new file mode 100644
index 0000000..5fe8328
--- /dev/null
+++ b/common/jpeg/wrgif.c
@@ -0,0 +1,399 @@
+/*
+ * wrgif.c
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in GIF format.
+ *
+ **************************************************************************
+ * NOTE: to avoid entanglements with Unisys' patent on LZW compression,   *
+ * this code has been modified to output "uncompressed GIF" files.        *
+ * There is no trace of the LZW algorithm in this file.                   *
+ **************************************************************************
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ */
+
+/*
+ * This code is loosely based on ppmtogif from the PBMPLUS distribution
+ * of Feb. 1991.  That file contains the following copyright notice:
+ *    Based on GIFENCODE by David Rowley <mgardi@watdscu.waterloo.edu>.
+ *    Lempel-Ziv compression based on "compress" by Spencer W. Thomas et al.
+ *    Copyright (C) 1989 by Jef Poskanzer.
+ *    Permission to use, copy, modify, and distribute this software and its
+ *    documentation for any purpose and without fee is hereby granted, provided
+ *    that the above copyright notice appear in all copies and that both that
+ *    copyright notice and this permission notice appear in supporting
+ *    documentation.  This software is provided "as is" without express or
+ *    implied warranty.
+ *
+ * We are also required to state that
+ *    "The Graphics Interchange Format(c) is the Copyright property of
+ *    CompuServe Incorporated. GIF(sm) is a Service Mark property of
+ *    CompuServe Incorporated."
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef GIF_SUPPORTED
+
+
+/* Private version of data destination object */
+
+typedef struct {
+  struct djpeg_dest_struct pub;	/* public fields */
+
+  j_decompress_ptr cinfo;	/* back link saves passing separate parm */
+
+  /* State for packing variable-width codes into a bitstream */
+  int n_bits;			/* current number of bits/code */
+  int maxcode;			/* maximum code, given n_bits */
+  INT32 cur_accum;		/* holds bits not yet output */
+  int cur_bits;			/* # of bits in cur_accum */
+
+  /* State for GIF code assignment */
+  int ClearCode;		/* clear code (doesn't change) */
+  int EOFCode;			/* EOF code (ditto) */
+  int code_counter;		/* counts output symbols */
+
+  /* GIF data packet construction buffer */
+  int bytesinpkt;		/* # of bytes in current packet */
+  char packetbuf[256];		/* workspace for accumulating packet */
+
+} gif_dest_struct;
+
+typedef gif_dest_struct * gif_dest_ptr;
+
+/* Largest value that will fit in N bits */
+#define MAXCODE(n_bits)	((1 << (n_bits)) - 1)
+
+
+/*
+ * Routines to package finished data bytes into GIF data blocks.
+ * A data block consists of a count byte (1..255) and that many data bytes.
+ */
+
+LOCAL(void)
+flush_packet (gif_dest_ptr dinfo)
+/* flush any accumulated data */
+{
+  if (dinfo->bytesinpkt > 0) {	/* never write zero-length packet */
+    dinfo->packetbuf[0] = (char) dinfo->bytesinpkt++;
+    if (JFWRITE(dinfo->pub.output_file, dinfo->packetbuf, dinfo->bytesinpkt)
+	!= (size_t) dinfo->bytesinpkt)
+      ERREXIT(dinfo->cinfo, JERR_FILE_WRITE);
+    dinfo->bytesinpkt = 0;
+  }
+}
+
+
+/* Add a character to current packet; flush to disk if necessary */
+#define CHAR_OUT(dinfo,c)  \
+	{ (dinfo)->packetbuf[++(dinfo)->bytesinpkt] = (char) (c);  \
+	    if ((dinfo)->bytesinpkt >= 255)  \
+	      flush_packet(dinfo);  \
+	}
+
+
+/* Routine to convert variable-width codes into a byte stream */
+
+LOCAL(void)
+output (gif_dest_ptr dinfo, int code)
+/* Emit a code of n_bits bits */
+/* Uses cur_accum and cur_bits to reblock into 8-bit bytes */
+{
+  dinfo->cur_accum |= ((INT32) code) << dinfo->cur_bits;
+  dinfo->cur_bits += dinfo->n_bits;
+
+  while (dinfo->cur_bits >= 8) {
+    CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);
+    dinfo->cur_accum >>= 8;
+    dinfo->cur_bits -= 8;
+  }
+}
+
+
+/* The pseudo-compression algorithm.
+ *
+ * In this module we simply output each pixel value as a separate symbol;
+ * thus, no compression occurs.  In fact, there is expansion of one bit per
+ * pixel, because we use a symbol width one bit wider than the pixel width.
+ *
+ * GIF ordinarily uses variable-width symbols, and the decoder will expect
+ * to ratchet up the symbol width after a fixed number of symbols.
+ * To simplify the logic and keep the expansion penalty down, we emit a
+ * GIF Clear code to reset the decoder just before the width would ratchet up.
+ * Thus, all the symbols in the output file will have the same bit width.
+ * Note that emitting the Clear codes at the right times is a mere matter of
+ * counting output symbols and is in no way dependent on the LZW patent.
+ *
+ * With a small basic pixel width (low color count), Clear codes will be
+ * needed very frequently, causing the file to expand even more.  So this
+ * simplistic approach wouldn't work too well on bilevel images, for example.
+ * But for output of JPEG conversions the pixel width will usually be 8 bits
+ * (129 to 256 colors), so the overhead added by Clear symbols is only about
+ * one symbol in every 256.
+ */
+
+LOCAL(void)
+compress_init (gif_dest_ptr dinfo, int i_bits)
+/* Initialize pseudo-compressor */
+{
+  /* init all the state variables */
+  dinfo->n_bits = i_bits;
+  dinfo->maxcode = MAXCODE(dinfo->n_bits);
+  dinfo->ClearCode = (1 << (i_bits - 1));
+  dinfo->EOFCode = dinfo->ClearCode + 1;
+  dinfo->code_counter = dinfo->ClearCode + 2;
+  /* init output buffering vars */
+  dinfo->bytesinpkt = 0;
+  dinfo->cur_accum = 0;
+  dinfo->cur_bits = 0;
+  /* GIF specifies an initial Clear code */
+  output(dinfo, dinfo->ClearCode);
+}
+
+
+LOCAL(void)
+compress_pixel (gif_dest_ptr dinfo, int c)
+/* Accept and "compress" one pixel value.
+ * The given value must be less than n_bits wide.
+ */
+{
+  /* Output the given pixel value as a symbol. */
+  output(dinfo, c);
+  /* Issue Clear codes often enough to keep the reader from ratcheting up
+   * its symbol size.
+   */
+  if (dinfo->code_counter < dinfo->maxcode) {
+    dinfo->code_counter++;
+  } else {
+    output(dinfo, dinfo->ClearCode);
+    dinfo->code_counter = dinfo->ClearCode + 2;	/* reset the counter */
+  }
+}
+
+
+LOCAL(void)
+compress_term (gif_dest_ptr dinfo)
+/* Clean up at end */
+{
+  /* Send an EOF code */
+  output(dinfo, dinfo->EOFCode);
+  /* Flush the bit-packing buffer */
+  if (dinfo->cur_bits > 0) {
+    CHAR_OUT(dinfo, dinfo->cur_accum & 0xFF);
+  }
+  /* Flush the packet buffer */
+  flush_packet(dinfo);
+}
+
+
+/* GIF header construction */
+
+
+LOCAL(void)
+put_word (gif_dest_ptr dinfo, unsigned int w)
+/* Emit a 16-bit word, LSB first */
+{
+  putc(w & 0xFF, dinfo->pub.output_file);
+  putc((w >> 8) & 0xFF, dinfo->pub.output_file);
+}
+
+
+LOCAL(void)
+put_3bytes (gif_dest_ptr dinfo, int val)
+/* Emit 3 copies of same byte value --- handy subr for colormap construction */
+{
+  putc(val, dinfo->pub.output_file);
+  putc(val, dinfo->pub.output_file);
+  putc(val, dinfo->pub.output_file);
+}
+
+
+LOCAL(void)
+emit_header (gif_dest_ptr dinfo, int num_colors, JSAMPARRAY colormap)
+/* Output the GIF file header, including color map */
+/* If colormap==NULL, synthesize a gray-scale colormap */
+{
+  int BitsPerPixel, ColorMapSize, InitCodeSize, FlagByte;
+  int cshift = dinfo->cinfo->data_precision - 8;
+  int i;
+
+  if (num_colors > 256)
+    ERREXIT1(dinfo->cinfo, JERR_TOO_MANY_COLORS, num_colors);
+  /* Compute bits/pixel and related values */
+  BitsPerPixel = 1;
+  while (num_colors > (1 << BitsPerPixel))
+    BitsPerPixel++;
+  ColorMapSize = 1 << BitsPerPixel;
+  if (BitsPerPixel <= 1)
+    InitCodeSize = 2;
+  else
+    InitCodeSize = BitsPerPixel;
+  /*
+   * Write the GIF header.
+   * Note that we generate a plain GIF87 header for maximum compatibility.
+   */
+  putc('G', dinfo->pub.output_file);
+  putc('I', dinfo->pub.output_file);
+  putc('F', dinfo->pub.output_file);
+  putc('8', dinfo->pub.output_file);
+  putc('7', dinfo->pub.output_file);
+  putc('a', dinfo->pub.output_file);
+  /* Write the Logical Screen Descriptor */
+  put_word(dinfo, (unsigned int) dinfo->cinfo->output_width);
+  put_word(dinfo, (unsigned int) dinfo->cinfo->output_height);
+  FlagByte = 0x80;		/* Yes, there is a global color table */
+  FlagByte |= (BitsPerPixel-1) << 4; /* color resolution */
+  FlagByte |= (BitsPerPixel-1);	/* size of global color table */
+  putc(FlagByte, dinfo->pub.output_file);
+  putc(0, dinfo->pub.output_file); /* Background color index */
+  putc(0, dinfo->pub.output_file); /* Reserved (aspect ratio in GIF89) */
+  /* Write the Global Color Map */
+  /* If the color map is more than 8 bits precision, */
+  /* we reduce it to 8 bits by shifting */
+  for (i=0; i < ColorMapSize; i++) {
+    if (i < num_colors) {
+      if (colormap != NULL) {
+	if (dinfo->cinfo->out_color_space == JCS_RGB) {
+	  /* Normal case: RGB color map */
+	  putc(GETJSAMPLE(colormap[0][i]) >> cshift, dinfo->pub.output_file);
+	  putc(GETJSAMPLE(colormap[1][i]) >> cshift, dinfo->pub.output_file);
+	  putc(GETJSAMPLE(colormap[2][i]) >> cshift, dinfo->pub.output_file);
+	} else {
+	  /* Grayscale "color map": possible if quantizing grayscale image */
+	  put_3bytes(dinfo, GETJSAMPLE(colormap[0][i]) >> cshift);
+	}
+      } else {
+	/* Create a gray-scale map of num_colors values, range 0..255 */
+	put_3bytes(dinfo, (i * 255 + (num_colors-1)/2) / (num_colors-1));
+      }
+    } else {
+      /* fill out the map to a power of 2 */
+      put_3bytes(dinfo, 0);
+    }
+  }
+  /* Write image separator and Image Descriptor */
+  putc(',', dinfo->pub.output_file); /* separator */
+  put_word(dinfo, 0);		/* left/top offset */
+  put_word(dinfo, 0);
+  put_word(dinfo, (unsigned int) dinfo->cinfo->output_width); /* image size */
+  put_word(dinfo, (unsigned int) dinfo->cinfo->output_height);
+  /* flag byte: not interlaced, no local color map */
+  putc(0x00, dinfo->pub.output_file);
+  /* Write Initial Code Size byte */
+  putc(InitCodeSize, dinfo->pub.output_file);
+
+  /* Initialize for "compression" of image data */
+  compress_init(dinfo, InitCodeSize+1);
+}
+
+
+/*
+ * Startup: write the file header.
+ */
+
+METHODDEF(void)
+start_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
+
+  if (cinfo->quantize_colors)
+    emit_header(dest, cinfo->actual_number_of_colors, cinfo->colormap);
+  else
+    emit_header(dest, 256, (JSAMPARRAY) NULL);
+}
+
+
+/*
+ * Write some pixel data.
+ * In this module rows_supplied will always be 1.
+ */
+
+METHODDEF(void)
+put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		JDIMENSION rows_supplied)
+{
+  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+
+  ptr = dest->pub.buffer[0];
+  for (col = cinfo->output_width; col > 0; col--) {
+    compress_pixel(dest, GETJSAMPLE(*ptr++));
+  }
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_output_gif (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  gif_dest_ptr dest = (gif_dest_ptr) dinfo;
+
+  /* Flush "compression" mechanism */
+  compress_term(dest);
+  /* Write a zero-length data block to end the series */
+  putc(0, dest->pub.output_file);
+  /* Write the GIF terminator mark */
+  putc(';', dest->pub.output_file);
+  /* Make sure we wrote the output file OK */
+  fflush(dest->pub.output_file);
+  if (ferror(dest->pub.output_file))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for GIF format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_gif (j_decompress_ptr cinfo)
+{
+  gif_dest_ptr dest;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (gif_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(gif_dest_struct));
+  dest->cinfo = cinfo;		/* make back link for subroutines */
+  dest->pub.start_output = start_output_gif;
+  dest->pub.put_pixel_rows = put_pixel_rows;
+  dest->pub.finish_output = finish_output_gif;
+
+  if (cinfo->out_color_space != JCS_GRAYSCALE &&
+      cinfo->out_color_space != JCS_RGB)
+    ERREXIT(cinfo, JERR_GIF_COLORSPACE);
+
+  /* Force quantization if color or if > 8 bits input */
+  if (cinfo->out_color_space != JCS_GRAYSCALE || cinfo->data_precision > 8) {
+    /* Force quantization to at most 256 colors */
+    cinfo->quantize_colors = TRUE;
+    if (cinfo->desired_number_of_colors > 256)
+      cinfo->desired_number_of_colors = 256;
+  }
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  if (cinfo->output_components != 1) /* safety check: just one component? */
+    ERREXIT(cinfo, JERR_GIF_BUG);
+
+  /* Create decompressor output buffer. */
+  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, cinfo->output_width, (JDIMENSION) 1);
+  dest->pub.buffer_height = 1;
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* GIF_SUPPORTED */
diff --git a/common/jpeg/wrppm.c b/common/jpeg/wrppm.c
new file mode 100644
index 0000000..6c6d908
--- /dev/null
+++ b/common/jpeg/wrppm.c
@@ -0,0 +1,268 @@
+/*
+ * wrppm.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in PPM/PGM format.
+ * The extended 2-byte-per-sample raw PPM/PGM formats are supported.
+ * The PBMPLUS library is NOT required to compile this software
+ * (but it is highly useful as a set of PPM image manipulation programs).
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef PPM_SUPPORTED
+
+
+/*
+ * For 12-bit JPEG data, we either downscale the values to 8 bits
+ * (to write standard byte-per-sample PPM/PGM files), or output
+ * nonstandard word-per-sample PPM/PGM files.  Downscaling is done
+ * if PPM_NORAWWORD is defined (this can be done in the Makefile
+ * or in jconfig.h).
+ * (When the core library supports data precision reduction, a cleaner
+ * implementation will be to ask for that instead.)
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define PUTPPMSAMPLE(ptr,v)  *ptr++ = (char) (v)
+#define BYTESPERSAMPLE 1
+#define PPM_MAXVAL 255
+#else
+#ifdef PPM_NORAWWORD
+#define PUTPPMSAMPLE(ptr,v)  *ptr++ = (char) ((v) >> (BITS_IN_JSAMPLE-8))
+#define BYTESPERSAMPLE 1
+#define PPM_MAXVAL 255
+#else
+/* The word-per-sample format always puts the LSB first. */
+#define PUTPPMSAMPLE(ptr,v)			\
+	{ register int val_ = v;		\
+	  *ptr++ = (char) (val_ & 0xFF);	\
+	  *ptr++ = (char) ((val_ >> 8) & 0xFF);	\
+	}
+#define BYTESPERSAMPLE 2
+#define PPM_MAXVAL ((1<<BITS_IN_JSAMPLE)-1)
+#endif
+#endif
+
+
+/*
+ * When JSAMPLE is the same size as char, we can just fwrite() the
+ * decompressed data to the PPM or PGM file.  On PCs, in order to make this
+ * work the output buffer must be allocated in near data space, because we are
+ * assuming small-data memory model wherein fwrite() can't reach far memory.
+ * If you need to process very wide images on a PC, you might have to compile
+ * in large-memory model, or else replace fwrite() with a putc() loop ---
+ * which will be much slower.
+ */
+
+
+/* Private version of data destination object */
+
+typedef struct {
+  struct djpeg_dest_struct pub;	/* public fields */
+
+  /* Usually these two pointers point to the same place: */
+  char *iobuffer;		/* fwrite's I/O buffer */
+  JSAMPROW pixrow;		/* decompressor output buffer */
+  size_t buffer_width;		/* width of I/O buffer */
+  JDIMENSION samples_per_row;	/* JSAMPLEs per output row */
+} ppm_dest_struct;
+
+typedef ppm_dest_struct * ppm_dest_ptr;
+
+
+/*
+ * Write some pixel data.
+ * In this module rows_supplied will always be 1.
+ *
+ * put_pixel_rows handles the "normal" 8-bit case where the decompressor
+ * output buffer is physically the same as the fwrite buffer.
+ */
+
+METHODDEF(void)
+put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		JDIMENSION rows_supplied)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * This code is used when we have to copy the data and apply a pixel
+ * format translation.  Typically this only happens in 12-bit mode.
+ */
+
+METHODDEF(void)
+copy_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		 JDIMENSION rows_supplied)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+  register char * bufferptr;
+  register JSAMPROW ptr;
+  register JDIMENSION col;
+
+  ptr = dest->pub.buffer[0];
+  bufferptr = dest->iobuffer;
+  for (col = dest->samples_per_row; col > 0; col--) {
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(*ptr++));
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * Write some pixel data when color quantization is in effect.
+ * We have to demap the color index values to straight data.
+ */
+
+METHODDEF(void)
+put_demapped_rgb (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		  JDIMENSION rows_supplied)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+  register char * bufferptr;
+  register int pixval;
+  register JSAMPROW ptr;
+  register JSAMPROW color_map0 = cinfo->colormap[0];
+  register JSAMPROW color_map1 = cinfo->colormap[1];
+  register JSAMPROW color_map2 = cinfo->colormap[2];
+  register JDIMENSION col;
+
+  ptr = dest->pub.buffer[0];
+  bufferptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    pixval = GETJSAMPLE(*ptr++);
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map0[pixval]));
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map1[pixval]));
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map2[pixval]));
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+METHODDEF(void)
+put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		   JDIMENSION rows_supplied)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+  register char * bufferptr;
+  register JSAMPROW ptr;
+  register JSAMPROW color_map = cinfo->colormap[0];
+  register JDIMENSION col;
+
+  ptr = dest->pub.buffer[0];
+  bufferptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    PUTPPMSAMPLE(bufferptr, GETJSAMPLE(color_map[GETJSAMPLE(*ptr++)]));
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * Startup: write the file header.
+ */
+
+METHODDEF(void)
+start_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  ppm_dest_ptr dest = (ppm_dest_ptr) dinfo;
+
+  /* Emit file header */
+  switch (cinfo->out_color_space) {
+  case JCS_GRAYSCALE:
+    /* emit header for raw PGM format */
+    fprintf(dest->pub.output_file, "P5\n%ld %ld\n%d\n",
+	    (long) cinfo->output_width, (long) cinfo->output_height,
+	    PPM_MAXVAL);
+    break;
+  case JCS_RGB:
+    /* emit header for raw PPM format */
+    fprintf(dest->pub.output_file, "P6\n%ld %ld\n%d\n",
+	    (long) cinfo->output_width, (long) cinfo->output_height,
+	    PPM_MAXVAL);
+    break;
+  default:
+    ERREXIT(cinfo, JERR_PPM_COLORSPACE);
+  }
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_output_ppm (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  /* Make sure we wrote the output file OK */
+  fflush(dinfo->output_file);
+  if (ferror(dinfo->output_file))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for PPM format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_ppm (j_decompress_ptr cinfo)
+{
+  ppm_dest_ptr dest;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (ppm_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(ppm_dest_struct));
+  dest->pub.start_output = start_output_ppm;
+  dest->pub.finish_output = finish_output_ppm;
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  /* Create physical I/O buffer.  Note we make this near on a PC. */
+  dest->samples_per_row = cinfo->output_width * cinfo->out_color_components;
+  dest->buffer_width = dest->samples_per_row * (BYTESPERSAMPLE * SIZEOF(char));
+  dest->iobuffer = (char *) (*cinfo->mem->alloc_small)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width);
+
+  if (cinfo->quantize_colors || BITS_IN_JSAMPLE != 8 ||
+      SIZEOF(JSAMPLE) != SIZEOF(char)) {
+    /* When quantizing, we need an output buffer for colormap indexes
+     * that's separate from the physical I/O buffer.  We also need a
+     * separate buffer if pixel format translation must take place.
+     */
+    dest->pub.buffer = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       cinfo->output_width * cinfo->output_components, (JDIMENSION) 1);
+    dest->pub.buffer_height = 1;
+    if (! cinfo->quantize_colors)
+      dest->pub.put_pixel_rows = copy_pixel_rows;
+    else if (cinfo->out_color_space == JCS_GRAYSCALE)
+      dest->pub.put_pixel_rows = put_demapped_gray;
+    else
+      dest->pub.put_pixel_rows = put_demapped_rgb;
+  } else {
+    /* We will fwrite() directly from decompressor output buffer. */
+    /* Synthesize a JSAMPARRAY pointer structure */
+    /* Cast here implies near->far pointer conversion on PCs */
+    dest->pixrow = (JSAMPROW) dest->iobuffer;
+    dest->pub.buffer = & dest->pixrow;
+    dest->pub.buffer_height = 1;
+    dest->pub.put_pixel_rows = put_pixel_rows;
+  }
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* PPM_SUPPORTED */
diff --git a/common/jpeg/wrtarga.c b/common/jpeg/wrtarga.c
new file mode 100644
index 0000000..cf104d2
--- /dev/null
+++ b/common/jpeg/wrtarga.c
@@ -0,0 +1,253 @@
+/*
+ * wrtarga.c
+ *
+ * Copyright (C) 1991-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains routines to write output images in Targa format.
+ *
+ * These routines may need modification for non-Unix environments or
+ * specialized applications.  As they stand, they assume output to
+ * an ordinary stdio stream.
+ *
+ * Based on code contributed by Lee Daniel Crocker.
+ */
+
+#include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+
+#ifdef TARGA_SUPPORTED
+
+
+/*
+ * To support 12-bit JPEG data, we'd have to scale output down to 8 bits.
+ * This is not yet implemented.
+ */
+
+#if BITS_IN_JSAMPLE != 8
+  Sorry, this code only copes with 8-bit JSAMPLEs. /* deliberate syntax err */
+#endif
+
+/*
+ * The output buffer needs to be writable by fwrite().  On PCs, we must
+ * allocate the buffer in near data space, because we are assuming small-data
+ * memory model, wherein fwrite() can't reach far memory.  If you need to
+ * process very wide images on a PC, you might have to compile in large-memory
+ * model, or else replace fwrite() with a putc() loop --- which will be much
+ * slower.
+ */
+
+
+/* Private version of data destination object */
+
+typedef struct {
+  struct djpeg_dest_struct pub;	/* public fields */
+
+  char *iobuffer;		/* physical I/O buffer */
+  JDIMENSION buffer_width;	/* width of one row */
+} tga_dest_struct;
+
+typedef tga_dest_struct * tga_dest_ptr;
+
+
+LOCAL(void)
+write_header (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo, int num_colors)
+/* Create and write a Targa header */
+{
+  char targaheader[18];
+
+  /* Set unused fields of header to 0 */
+  MEMZERO(targaheader, SIZEOF(targaheader));
+
+  if (num_colors > 0) {
+    targaheader[1] = 1;		/* color map type 1 */
+    targaheader[5] = (char) (num_colors & 0xFF);
+    targaheader[6] = (char) (num_colors >> 8);
+    targaheader[7] = 24;	/* 24 bits per cmap entry */
+  }
+
+  targaheader[12] = (char) (cinfo->output_width & 0xFF);
+  targaheader[13] = (char) (cinfo->output_width >> 8);
+  targaheader[14] = (char) (cinfo->output_height & 0xFF);
+  targaheader[15] = (char) (cinfo->output_height >> 8);
+  targaheader[17] = 0x20;	/* Top-down, non-interlaced */
+
+  if (cinfo->out_color_space == JCS_GRAYSCALE) {
+    targaheader[2] = 3;		/* image type = uncompressed gray-scale */
+    targaheader[16] = 8;	/* bits per pixel */
+  } else {			/* must be RGB */
+    if (num_colors > 0) {
+      targaheader[2] = 1;	/* image type = colormapped RGB */
+      targaheader[16] = 8;
+    } else {
+      targaheader[2] = 2;	/* image type = uncompressed RGB */
+      targaheader[16] = 24;
+    }
+  }
+
+  if (JFWRITE(dinfo->output_file, targaheader, 18) != (size_t) 18)
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * Write some pixel data.
+ * In this module rows_supplied will always be 1.
+ */
+
+METHODDEF(void)
+put_pixel_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		JDIMENSION rows_supplied)
+/* used for unquantized full-color output */
+{
+  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
+  register JSAMPROW inptr;
+  register char * outptr;
+  register JDIMENSION col;
+
+  inptr = dest->pub.buffer[0];
+  outptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    outptr[0] = (char) GETJSAMPLE(inptr[2]); /* RGB to BGR order */
+    outptr[1] = (char) GETJSAMPLE(inptr[1]);
+    outptr[2] = (char) GETJSAMPLE(inptr[0]);
+    inptr += 3, outptr += 3;
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+METHODDEF(void)
+put_gray_rows (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+	       JDIMENSION rows_supplied)
+/* used for grayscale OR quantized color output */
+{
+  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
+  register JSAMPROW inptr;
+  register char * outptr;
+  register JDIMENSION col;
+
+  inptr = dest->pub.buffer[0];
+  outptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    *outptr++ = (char) GETJSAMPLE(*inptr++);
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * Write some demapped pixel data when color quantization is in effect.
+ * For Targa, this is only applied to grayscale data.
+ */
+
+METHODDEF(void)
+put_demapped_gray (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
+		   JDIMENSION rows_supplied)
+{
+  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
+  register JSAMPROW inptr;
+  register char * outptr;
+  register JSAMPROW color_map0 = cinfo->colormap[0];
+  register JDIMENSION col;
+
+  inptr = dest->pub.buffer[0];
+  outptr = dest->iobuffer;
+  for (col = cinfo->output_width; col > 0; col--) {
+    *outptr++ = (char) GETJSAMPLE(color_map0[GETJSAMPLE(*inptr++)]);
+  }
+  (void) JFWRITE(dest->pub.output_file, dest->iobuffer, dest->buffer_width);
+}
+
+
+/*
+ * Startup: write the file header.
+ */
+
+METHODDEF(void)
+start_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  tga_dest_ptr dest = (tga_dest_ptr) dinfo;
+  int num_colors, i;
+  FILE *outfile;
+
+  if (cinfo->out_color_space == JCS_GRAYSCALE) {
+    /* Targa doesn't have a mapped grayscale format, so we will */
+    /* demap quantized gray output.  Never emit a colormap. */
+    write_header(cinfo, dinfo, 0);
+    if (cinfo->quantize_colors)
+      dest->pub.put_pixel_rows = put_demapped_gray;
+    else
+      dest->pub.put_pixel_rows = put_gray_rows;
+  } else if (cinfo->out_color_space == JCS_RGB) {
+    if (cinfo->quantize_colors) {
+      /* We only support 8-bit colormap indexes, so only 256 colors */
+      num_colors = cinfo->actual_number_of_colors;
+      if (num_colors > 256)
+	ERREXIT1(cinfo, JERR_TOO_MANY_COLORS, num_colors);
+      write_header(cinfo, dinfo, num_colors);
+      /* Write the colormap.  Note Targa uses BGR byte order */
+      outfile = dest->pub.output_file;
+      for (i = 0; i < num_colors; i++) {
+	putc(GETJSAMPLE(cinfo->colormap[2][i]), outfile);
+	putc(GETJSAMPLE(cinfo->colormap[1][i]), outfile);
+	putc(GETJSAMPLE(cinfo->colormap[0][i]), outfile);
+      }
+      dest->pub.put_pixel_rows = put_gray_rows;
+    } else {
+      write_header(cinfo, dinfo, 0);
+      dest->pub.put_pixel_rows = put_pixel_rows;
+    }
+  } else {
+    ERREXIT(cinfo, JERR_TGA_COLORSPACE);
+  }
+}
+
+
+/*
+ * Finish up at the end of the file.
+ */
+
+METHODDEF(void)
+finish_output_tga (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo)
+{
+  /* Make sure we wrote the output file OK */
+  fflush(dinfo->output_file);
+  if (ferror(dinfo->output_file))
+    ERREXIT(cinfo, JERR_FILE_WRITE);
+}
+
+
+/*
+ * The module selection routine for Targa format output.
+ */
+
+GLOBAL(djpeg_dest_ptr)
+jinit_write_targa (j_decompress_ptr cinfo)
+{
+  tga_dest_ptr dest;
+
+  /* Create module interface object, fill in method pointers */
+  dest = (tga_dest_ptr)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(tga_dest_struct));
+  dest->pub.start_output = start_output_tga;
+  dest->pub.finish_output = finish_output_tga;
+
+  /* Calculate output image dimensions so we can allocate space */
+  jpeg_calc_output_dimensions(cinfo);
+
+  /* Create I/O buffer.  Note we make this near on a PC. */
+  dest->buffer_width = cinfo->output_width * cinfo->output_components;
+  dest->iobuffer = (char *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(size_t) (dest->buffer_width * SIZEOF(char)));
+
+  /* Create decompressor output buffer. */
+  dest->pub.buffer = (*cinfo->mem->alloc_sarray)
+    ((j_common_ptr) cinfo, JPOOL_IMAGE, dest->buffer_width, (JDIMENSION) 1);
+  dest->pub.buffer_height = 1;
+
+  return (djpeg_dest_ptr) dest;
+}
+
+#endif /* TARGA_SUPPORTED */