Remove unneeded parts of embedded zlib.
git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@4026 3789f03b-4d11-0410-bbf8-ca57d06f2519
diff --git a/common/zlib/ChangeLog b/common/zlib/ChangeLog
deleted file mode 100644
index eded33d..0000000
--- a/common/zlib/ChangeLog
+++ /dev/null
@@ -1,481 +0,0 @@
-
- ChangeLog file for zlib
-
-Changes in 1.1.4 (11 March 2002)
-- ZFREE was repeated on same allocation on some error conditions.
- This creates a security problem described in
- http://www.zlib.org/advisory-2002-03-11.txt
-- Returned incorrect error (Z_MEM_ERROR) on some invalid data
-- Avoid accesses before window for invalid distances with inflate window
- less than 32K.
-- force windowBits > 8 to avoid a bug in the encoder for a window size
- of 256 bytes. (A complete fix will be available in 1.1.5).
-
-Changes in 1.1.3 (9 July 1998)
-- fix "an inflate input buffer bug that shows up on rare but persistent
- occasions" (Mark)
-- fix gzread and gztell for concatenated .gz files (Didier Le Botlan)
-- fix gzseek(..., SEEK_SET) in write mode
-- fix crc check after a gzeek (Frank Faubert)
-- fix miniunzip when the last entry in a zip file is itself a zip file
- (J Lillge)
-- add contrib/asm586 and contrib/asm686 (Brian Raiter)
- See http://www.muppetlabs.com/~breadbox/software/assembly.html
-- add support for Delphi 3 in contrib/delphi (Bob Dellaca)
-- add support for C++Builder 3 and Delphi 3 in contrib/delphi2 (Davide Moretti)
-- do not exit prematurely in untgz if 0 at start of block (Magnus Holmgren)
-- use macro EXTERN instead of extern to support DLL for BeOS (Sander Stoks)
-- added a FAQ file
-
-- Support gzdopen on Mac with Metrowerks (Jason Linhart)
-- Do not redefine Byte on Mac (Brad Pettit & Jason Linhart)
-- define SEEK_END too if SEEK_SET is not defined (Albert Chin-A-Young)
-- avoid some warnings with Borland C (Tom Tanner)
-- fix a problem in contrib/minizip/zip.c for 16-bit MSDOS (Gilles Vollant)
-- emulate utime() for WIN32 in contrib/untgz (Gilles Vollant)
-- allow several arguments to configure (Tim Mooney, Frodo Looijaard)
-- use libdir and includedir in Makefile.in (Tim Mooney)
-- support shared libraries on OSF1 V4 (Tim Mooney)
-- remove so_locations in "make clean" (Tim Mooney)
-- fix maketree.c compilation error (Glenn, Mark)
-- Python interface to zlib now in Python 1.5 (Jeremy Hylton)
-- new Makefile.riscos (Rich Walker)
-- initialize static descriptors in trees.c for embedded targets (Nick Smith)
-- use "foo-gz" in example.c for RISCOS and VMS (Nick Smith)
-- add the OS/2 files in Makefile.in too (Andrew Zabolotny)
-- fix fdopen and halloc macros for Microsoft C 6.0 (Tom Lane)
-- fix maketree.c to allow clean compilation of inffixed.h (Mark)
-- fix parameter check in deflateCopy (Gunther Nikl)
-- cleanup trees.c, use compressed_len only in debug mode (Christian Spieler)
-- Many portability patches by Christian Spieler:
- . zutil.c, zutil.h: added "const" for zmem*
- . Make_vms.com: fixed some typos
- . Make_vms.com: msdos/Makefile.*: removed zutil.h from some dependency lists
- . msdos/Makefile.msc: remove "default rtl link library" info from obj files
- . msdos/Makefile.*: use model-dependent name for the built zlib library
- . msdos/Makefile.emx, nt/Makefile.emx, nt/Makefile.gcc:
- new makefiles, for emx (DOS/OS2), emx&rsxnt and mingw32 (Windows 9x / NT)
-- use define instead of typedef for Bytef also for MSC small/medium (Tom Lane)
-- replace __far with _far for better portability (Christian Spieler, Tom Lane)
-- fix test for errno.h in configure (Tim Newsham)
-
-Changes in 1.1.2 (19 March 98)
-- added contrib/minzip, mini zip and unzip based on zlib (Gilles Vollant)
- See http://www.winimage.com/zLibDll/unzip.html
-- preinitialize the inflate tables for fixed codes, to make the code
- completely thread safe (Mark)
-- some simplifications and slight speed-up to the inflate code (Mark)
-- fix gzeof on non-compressed files (Allan Schrum)
-- add -std1 option in configure for OSF1 to fix gzprintf (Martin Mokrejs)
-- use default value of 4K for Z_BUFSIZE for 16-bit MSDOS (Tim Wegner + Glenn)
-- added os2/Makefile.def and os2/zlib.def (Andrew Zabolotny)
-- add shared lib support for UNIX_SV4.2MP (MATSUURA Takanori)
-- do not wrap extern "C" around system includes (Tom Lane)
-- mention zlib binding for TCL in README (Andreas Kupries)
-- added amiga/Makefile.pup for Amiga powerUP SAS/C PPC (Andreas Kleinert)
-- allow "make install prefix=..." even after configure (Glenn Randers-Pehrson)
-- allow "configure --prefix $HOME" (Tim Mooney)
-- remove warnings in example.c and gzio.c (Glenn Randers-Pehrson)
-- move Makefile.sas to amiga/Makefile.sas
-
-Changes in 1.1.1 (27 Feb 98)
-- fix macros _tr_tally_* in deflate.h for debug mode (Glenn Randers-Pehrson)
-- remove block truncation heuristic which had very marginal effect for zlib
- (smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
- compression ratio on some files. This also allows inlining _tr_tally for
- matches in deflate_slow.
-- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
-
-Changes in 1.1.0 (24 Feb 98)
-- do not return STREAM_END prematurely in inflate (John Bowler)
-- revert to the zlib 1.0.8 inflate to avoid the gcc 2.8.0 bug (Jeremy Buhler)
-- compile with -DFASTEST to get compression code optimized for speed only
-- in minigzip, try mmap'ing the input file first (Miguel Albrecht)
-- increase size of I/O buffers in minigzip.c and gzio.c (not a big gain
- on Sun but significant on HP)
-
-- add a pointer to experimental unzip library in README (Gilles Vollant)
-- initialize variable gcc in configure (Chris Herborth)
-
-Changes in 1.0.9 (17 Feb 1998)
-- added gzputs and gzgets functions
-- do not clear eof flag in gzseek (Mark Diekhans)
-- fix gzseek for files in transparent mode (Mark Diekhans)
-- do not assume that vsprintf returns the number of bytes written (Jens Krinke)
-- replace EXPORT with ZEXPORT to avoid conflict with other programs
-- added compress2 in zconf.h, zlib.def, zlib.dnt
-- new asm code from Gilles Vollant in contrib/asm386
-- simplify the inflate code (Mark):
- . Replace ZALLOC's in huft_build() with single ZALLOC in inflate_blocks_new()
- . ZALLOC the length list in inflate_trees_fixed() instead of using stack
- . ZALLOC the value area for huft_build() instead of using stack
- . Simplify Z_FINISH check in inflate()
-
-- Avoid gcc 2.8.0 comparison bug a little differently than zlib 1.0.8
-- in inftrees.c, avoid cc -O bug on HP (Farshid Elahi)
-- in zconf.h move the ZLIB_DLL stuff earlier to avoid problems with
- the declaration of FAR (Gilles VOllant)
-- install libz.so* with mode 755 (executable) instead of 644 (Marc Lehmann)
-- read_buf buf parameter of type Bytef* instead of charf*
-- zmemcpy parameters are of type Bytef*, not charf* (Joseph Strout)
-- do not redeclare unlink in minigzip.c for WIN32 (John Bowler)
-- fix check for presence of directories in "make install" (Ian Willis)
-
-Changes in 1.0.8 (27 Jan 1998)
-- fixed offsets in contrib/asm386/gvmat32.asm (Gilles Vollant)
-- fix gzgetc and gzputc for big endian systems (Markus Oberhumer)
-- added compress2() to allow setting the compression level
-- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
-- use constant arrays for the static trees in trees.c instead of computing
- them at run time (thanks to Ken Raeburn for this suggestion). To create
- trees.h, compile with GEN_TREES_H and run "make test".
-- check return code of example in "make test" and display result
-- pass minigzip command line options to file_compress
-- simplifying code of inflateSync to avoid gcc 2.8 bug
-
-- support CC="gcc -Wall" in configure -s (QingLong)
-- avoid a flush caused by ftell in gzopen for write mode (Ken Raeburn)
-- fix test for shared library support to avoid compiler warnings
-- zlib.lib -> zlib.dll in msdos/zlib.rc (Gilles Vollant)
-- check for TARGET_OS_MAC in addition to MACOS (Brad Pettit)
-- do not use fdopen for Metrowerks on Mac (Brad Pettit))
-- add checks for gzputc and gzputc in example.c
-- avoid warnings in gzio.c and deflate.c (Andreas Kleinert)
-- use const for the CRC table (Ken Raeburn)
-- fixed "make uninstall" for shared libraries
-- use Tracev instead of Trace in infblock.c
-- in example.c use correct compressed length for test_sync
-- suppress +vnocompatwarnings in configure for HPUX (not always supported)
-
-Changes in 1.0.7 (20 Jan 1998)
-- fix gzseek which was broken in write mode
-- return error for gzseek to negative absolute position
-- fix configure for Linux (Chun-Chung Chen)
-- increase stack space for MSC (Tim Wegner)
-- get_crc_table and inflateSyncPoint are EXPORTed (Gilles Vollant)
-- define EXPORTVA for gzprintf (Gilles Vollant)
-- added man page zlib.3 (Rick Rodgers)
-- for contrib/untgz, fix makedir() and improve Makefile
-
-- check gzseek in write mode in example.c
-- allocate extra buffer for seeks only if gzseek is actually called
-- avoid signed/unsigned comparisons (Tim Wegner, Gilles Vollant)
-- add inflateSyncPoint in zconf.h
-- fix list of exported functions in nt/zlib.dnt and mdsos/zlib.def
-
-Changes in 1.0.6 (19 Jan 1998)
-- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
- gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occuring only with compression level 0 (thanks to
- Andy Buckler for finding this one).
-- In minigzip, pass transparently also the first byte for .Z files.
-- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
-- check Z_FINISH in inflate (thanks to Marc Schluper)
-- Implement deflateCopy (thanks to Adam Costello)
-- make static libraries by default in configure, add --shared option.
-- move MSDOS or Windows specific files to directory msdos
-- suppress the notion of partial flush to simplify the interface
- (but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
-- suppress history buffer provided by application to simplify the interface
- (this feature was not implemented anyway in 1.0.4)
-- next_in and avail_in must be initialized before calling inflateInit or
- inflateInit2
-- add EXPORT in all exported functions (for Windows DLL)
-- added Makefile.nt (thanks to Stephen Williams)
-- added the unsupported "contrib" directory:
- contrib/asm386/ by Gilles Vollant <info@winimage.com>
- 386 asm code replacing longest_match().
- contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
- A C++ I/O streams interface to the zlib gz* functions
- contrib/iostream2/ by Tyge Løvset <Tyge.Lovset@cmr.no>
- Another C++ I/O streams interface
- contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
- A very simple tar.gz file extractor using zlib
- contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
- How to use compress(), uncompress() and the gz* functions from VB.
-- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
- level) in minigzip (thanks to Tom Lane)
-
-- use const for rommable constants in deflate
-- added test for gzseek and gztell in example.c
-- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
-- add undocumented function zError to convert error code to string
- (for Tim Smithers)
-- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
-- Use default memcpy for Symantec MSDOS compiler.
-- Add EXPORT keyword for check_func (needed for Windows DLL)
-- add current directory to LD_LIBRARY_PATH for "make test"
-- create also a link for libz.so.1
-- added support for FUJITSU UXP/DS (thanks to Toshiaki Nomura)
-- use $(SHAREDLIB) instead of libz.so in Makefile.in (for HPUX)
-- added -soname for Linux in configure (Chun-Chung Chen,
-- assign numbers to the exported functions in zlib.def (for Windows DLL)
-- add advice in zlib.h for best usage of deflateSetDictionary
-- work around compiler bug on Atari (cast Z_NULL in call of s->checkfn)
-- allow compilation with ANSI keywords only enabled for TurboC in large model
-- avoid "versionString"[0] (Borland bug)
-- add NEED_DUMMY_RETURN for Borland
-- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
-- allow compilation with CC
-- defined STDC for OS/2 (David Charlap)
-- limit external names to 8 chars for MVS (Thomas Lund)
-- in minigzip.c, use static buffers only for 16-bit systems
-- fix suffix check for "minigzip -d foo.gz"
-- do not return an error for the 2nd of two consecutive gzflush() (Felix Lee)
-- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
-- added makelcc.bat for lcc-win32 (Tom St Denis)
-- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
-- Avoid expanded $Id: ChangeLog,v 1.1 2004/10/08 09:44:20 const_k Exp $. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
-- check for unistd.h in configure (for off_t)
-- remove useless check parameter in inflate_blocks_free
-- avoid useless assignment of s->check to itself in inflate_blocks_new
-- do not flush twice in gzclose (thanks to Ken Raeburn)
-- rename FOPEN as F_OPEN to avoid clash with /usr/include/sys/file.h
-- use NO_ERRNO_H instead of enumeration of operating systems with errno.h
-- work around buggy fclose on pipes for HP/UX
-- support zlib DLL with BORLAND C++ 5.0 (thanks to Glenn Randers-Pehrson)
-- fix configure if CC is already equal to gcc
-
-Changes in 1.0.5 (3 Jan 98)
-- Fix inflate to terminate gracefully when fed corrupted or invalid data
-- Use const for rommable constants in inflate
-- Eliminate memory leaks on error conditions in inflate
-- Removed some vestigial code in inflate
-- Update web address in README
-
-Changes in 1.0.4 (24 Jul 96)
-- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
- bit, so the decompressor could decompress all the correct data but went
- on to attempt decompressing extra garbage data. This affected minigzip too.
-- zlibVersion and gzerror return const char* (needed for DLL)
-- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
-- use z_error only for DEBUG (avoid problem with DLLs)
-
-Changes in 1.0.3 (2 Jul 96)
-- use z_streamp instead of z_stream *, which is now a far pointer in MSDOS
- small and medium models; this makes the library incompatible with previous
- versions for these models. (No effect in large model or on other systems.)
-- return OK instead of BUF_ERROR if previous deflate call returned with
- avail_out as zero but there is nothing to do
-- added memcmp for non STDC compilers
-- define NO_DUMMY_DECL for more Mac compilers (.h files merged incorrectly)
-- define __32BIT__ if __386__ or i386 is defined (pb. with Watcom and SCO)
-- better check for 16-bit mode MSC (avoids problem with Symantec)
-
-Changes in 1.0.2 (23 May 96)
-- added Windows DLL support
-- added a function zlibVersion (for the DLL support)
-- fixed declarations using Bytef in infutil.c (pb with MSDOS medium model)
-- Bytef is define's instead of typedef'd only for Borland C
-- avoid reading uninitialized memory in example.c
-- mention in README that the zlib format is now RFC1950
-- updated Makefile.dj2
-- added algorithm.doc
-
-Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
-- fix array overlay in deflate.c which sometimes caused bad compressed data
-- fix inflate bug with empty stored block
-- fix MSDOS medium model which was broken in 0.99
-- fix deflateParams() which could generated bad compressed data.
-- Bytef is define'd instead of typedef'ed (work around Borland bug)
-- added an INDEX file
-- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
- Watcom (Makefile.wat), Amiga SAS/C (Makefile.sas)
-- speed up adler32 for modern machines without auto-increment
-- added -ansi for IRIX in configure
-- static_init_done in trees.c is an int
-- define unlink as delete for VMS
-- fix configure for QNX
-- add configure branch for SCO and HPUX
-- avoid many warnings (unused variables, dead assignments, etc...)
-- no fdopen for BeOS
-- fix the Watcom fix for 32 bit mode (define FAR as empty)
-- removed redefinition of Byte for MKWERKS
-- work around an MWKERKS bug (incorrect merge of all .h files)
-
-Changes in 0.99 (27 Jan 96)
-- allow preset dictionary shared between compressor and decompressor
-- allow compression level 0 (no compression)
-- add deflateParams in zlib.h: allow dynamic change of compression level
- and compression strategy.
-- test large buffers and deflateParams in example.c
-- add optional "configure" to build zlib as a shared library
-- suppress Makefile.qnx, use configure instead
-- fixed deflate for 64-bit systems (detected on Cray)
-- fixed inflate_blocks for 64-bit systems (detected on Alpha)
-- declare Z_DEFLATED in zlib.h (possible parameter for deflateInit2)
-- always return Z_BUF_ERROR when deflate() has nothing to do
-- deflateInit and inflateInit are now macros to allow version checking
-- prefix all global functions and types with z_ with -DZ_PREFIX
-- make falloc completely reentrant (inftrees.c)
-- fixed very unlikely race condition in ct_static_init
-- free in reverse order of allocation to help memory manager
-- use zlib-1.0/* instead of zlib/* inside the tar.gz
-- make zlib warning-free with "gcc -O3 -Wall -Wwrite-strings -Wpointer-arith
- -Wconversion -Wstrict-prototypes -Wmissing-prototypes"
-- allow gzread on concatenated .gz files
-- deflateEnd now returns Z_DATA_ERROR if it was premature
-- deflate is finally (?) fully deterministic (no matches beyond end of input)
-- Document Z_SYNC_FLUSH
-- add uninstall in Makefile
-- Check for __cpluplus in zlib.h
-- Better test in ct_align for partial flush
-- avoid harmless warnings for Borland C++
-- initialize hash_head in deflate.c
-- avoid warning on fdopen (gzio.c) for HP cc -Aa
-- include stdlib.h for STDC compilers
-- include errno.h for Cray
-- ignore error if ranlib doesn't exist
-- call ranlib twice for NeXTSTEP
-- use exec_prefix instead of prefix for libz.a
-- renamed ct_* as _tr_* to avoid conflict with applications
-- clear z->msg in inflateInit2 before any error return
-- initialize opaque in example.c, gzio.c, deflate.c and inflate.c
-- fixed typo in zconf.h (_GNUC__ => __GNUC__)
-- check for WIN32 in zconf.h and zutil.c (avoid farmalloc in 32-bit mode)
-- fix typo in Make_vms.com (f$trnlnm -> f$getsyi)
-- in fcalloc, normalize pointer if size > 65520 bytes
-- don't use special fcalloc for 32 bit Borland C++
-- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
-- use Z_BINARY instead of BINARY
-- document that gzclose after gzdopen will close the file
-- allow "a" as mode in gzopen.
-- fix error checking in gzread
-- allow skipping .gz extra-field on pipes
-- added reference to Perl interface in README
-- put the crc table in FAR data (I dislike more and more the medium model :)
-- added get_crc_table
-- added a dimension to all arrays (Borland C can't count).
-- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
-- guard against multiple inclusion of *.h (for precompiled header on Mac)
-- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
-- don't use unsized arrays to avoid silly warnings by Visual C++:
- warning C4746: 'inflate_mask' : unsized array treated as '__far'
- (what's wrong with far data in far model?).
-- define enum out of inflate_blocks_state to allow compilation with C++
-
-Changes in 0.95 (16 Aug 95)
-- fix MSDOS small and medium model (now easier to adapt to any compiler)
-- inlined send_bits
-- fix the final (:-) bug for deflate with flush (output was correct but
- not completely flushed in rare occasions).
-- default window size is same for compression and decompression
- (it's now sufficient to set MAX_WBITS in zconf.h).
-- voidp -> voidpf and voidnp -> voidp (for consistency with other
- typedefs and because voidnp was not near in large model).
-
-Changes in 0.94 (13 Aug 95)
-- support MSDOS medium model
-- fix deflate with flush (could sometimes generate bad output)
-- fix deflateReset (zlib header was incorrectly suppressed)
-- added support for VMS
-- allow a compression level in gzopen()
-- gzflush now calls fflush
-- For deflate with flush, flush even if no more input is provided.
-- rename libgz.a as libz.a
-- avoid complex expression in infcodes.c triggering Turbo C bug
-- work around a problem with gcc on Alpha (in INSERT_STRING)
-- don't use inline functions (problem with some gcc versions)
-- allow renaming of Byte, uInt, etc... with #define.
-- avoid warning about (unused) pointer before start of array in deflate.c
-- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
-- avoid reserved word 'new' in trees.c
-
-Changes in 0.93 (25 June 95)
-- temporarily disable inline functions
-- make deflate deterministic
-- give enough lookahead for PARTIAL_FLUSH
-- Set binary mode for stdin/stdout in minigzip.c for OS/2
-- don't even use signed char in inflate (not portable enough)
-- fix inflate memory leak for segmented architectures
-
-Changes in 0.92 (3 May 95)
-- don't assume that char is signed (problem on SGI)
-- Clear bit buffer when starting a stored block
-- no memcpy on Pyramid
-- suppressed inftest.c
-- optimized fill_window, put longest_match inline for gcc
-- optimized inflate on stored blocks.
-- untabify all sources to simplify patches
-
-Changes in 0.91 (2 May 95)
-- Default MEM_LEVEL is 8 (not 9 for Unix) as documented in zlib.h
-- Document the memory requirements in zconf.h
-- added "make install"
-- fix sync search logic in inflateSync
-- deflate(Z_FULL_FLUSH) now works even if output buffer too short
-- after inflateSync, don't scare people with just "lo world"
-- added support for DJGPP
-
-Changes in 0.9 (1 May 95)
-- don't assume that zalloc clears the allocated memory (the TurboC bug
- was Mark's bug after all :)
-- let again gzread copy uncompressed data unchanged (was working in 0.71)
-- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
-- added a test of inflateSync in example.c
-- moved MAX_WBITS to zconf.h because users might want to change that.
-- document explicitly that zalloc(64K) on MSDOS must return a normalized
- pointer (zero offset)
-- added Makefiles for Microsoft C, Turbo C, Borland C++
-- faster crc32()
-
-Changes in 0.8 (29 April 95)
-- added fast inflate (inffast.c)
-- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
- is incompatible with previous versions of zlib which returned Z_OK.
-- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
- (actually that was not a compiler bug, see 0.81 above)
-- gzread no longer reads one extra byte in certain cases
-- In gzio destroy(), don't reference a freed structure
-- avoid many warnings for MSDOS
-- avoid the ERROR symbol which is used by MS Windows
-
-Changes in 0.71 (14 April 95)
-- Fixed more MSDOS compilation problems :( There is still a bug with
- TurboC large model.
-
-Changes in 0.7 (14 April 95)
-- Added full inflate support.
-- Simplified the crc32() interface. The pre- and post-conditioning
- (one's complement) is now done inside crc32(). WARNING: this is
- incompatible with previous versions; see zlib.h for the new usage.
-
-Changes in 0.61 (12 April 95)
-- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
-
-Changes in 0.6 (11 April 95)
-- added minigzip.c
-- added gzdopen to reopen a file descriptor as gzFile
-- added transparent reading of non-gziped files in gzread.
-- fixed bug in gzread (don't read crc as data)
-- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
-- don't allocate big arrays in the stack (for MSDOS)
-- fix some MSDOS compilation problems
-
-Changes in 0.5:
-- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
- not yet Z_FULL_FLUSH.
-- support decompression but only in a single step (forced Z_FINISH)
-- added opaque object for zalloc and zfree.
-- added deflateReset and inflateReset
-- added a variable zlib_version for consistency checking.
-- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
- Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
-
-Changes in 0.4:
-- avoid "zip" everywhere, use zlib instead of ziplib.
-- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
- if compression method == 8.
-- added adler32 and crc32
-- renamed deflateOptions as deflateInit2, call one or the other but not both
-- added the method parameter for deflateInit2.
-- added inflateInit2
-- simplied considerably deflateInit and inflateInit by not supporting
- user-provided history buffer. This is supported only in deflateInit2
- and inflateInit2.
-
-Changes in 0.3:
-- prefix all macro names with Z_
-- use Z_FINISH instead of deflateEnd to finish compression.
-- added Z_HUFFMAN_ONLY
-- added gzerror()
diff --git a/common/zlib/FAQ b/common/zlib/FAQ
deleted file mode 100644
index 47a7d60..0000000
--- a/common/zlib/FAQ
+++ /dev/null
@@ -1,100 +0,0 @@
-
- Frequently Asked Questions about zlib
-
-
-If your question is not there, please check the zlib home page
-http://www.zlib.org which may have more recent information.
-The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
-
-
- 1. Is zlib Y2K-compliant?
-
- Yes. zlib doesn't handle dates.
-
- 2. Where can I get a Windows DLL version?
-
- The zlib sources can be compiled without change to produce a DLL. If you
- want a precompiled DLL, see http://www.winimage.com/zLibDll/ . Questions
- about the zlib DLL should be sent to Gilles Vollant (info@winimage.com).
-
- 3. Where can I get a Visual Basic interface to zlib?
-
- See
- * http://www.winimage.com/zLibDll/cmp-z-it.zip
- * http://www.dogma.net/markn/articles/zlibtool/zlibtool.htm
- * contrib/visual-basic.txt in the zlib distribution
-
- 4. compress() returns Z_BUF_ERROR
-
- Make sure that before the call of compress, the length of the compressed
- buffer is equal to the total size of the compressed buffer and not
- zero. For Visual Basic, check that this parameter is passed by reference
- ("as any"), not by value ("as long").
-
- 5. deflate() or inflate() returns Z_BUF_ERROR
-
- Before making the call, make sure that avail_in and avail_out are not
- zero. When setting the parameter flush equal to Z_FINISH, also make sure
- that avail_out is big enough to allow processing all pending input.
-
- 6. Where's the zlib documentation (man pages, etc.)?
-
- It's in zlib.h for the moment, and Francis S. Lin has converted it to a
- web page zlib.html. Volunteers to transform this to Unix-style man pages,
- please contact Jean-loup Gailly (jloup@gzip.org). Examples of zlib usage
- are in the files example.c and minigzip.c.
-
- 7. Why don't you use GNU autoconf or libtool or ...?
-
- Because we would like to keep zlib as a very small and simple
- package. zlib is rather portable and doesn't need much configuration.
-
- 8. I found a bug in zlib.
-
- Most of the time, such problems are due to an incorrect usage of
- zlib. Please try to reproduce the problem with a small program and send
- the corresponding source to us at zlib@gzip.org . Do not send
- multi-megabyte data files without prior agreement.
-
- 9. Why do I get "undefined reference to gzputc"?
-
- If "make test" produces something like
-
- example.o(.text+0x154): undefined reference to `gzputc'
-
- check that you don't have old files libz.* in /usr/lib, /usr/local/lib or
- /usr/X11R6/lib. Remove any old versions, then do "make install".
-
-10. I need a Delphi interface to zlib.
-
- See the directories contrib/delphi and contrib/delphi2 in the zlib
- distribution.
-
-11. Can zlib handle .zip archives?
-
- See the directory contrib/minizip in the zlib distribution.
-
-12. Can zlib handle .Z files?
-
- No, sorry. You have to spawn an uncompress or gunzip subprocess, or adapt
- the code of uncompress on your own.
-
-13. How can I make a Unix shared library?
-
- make clean
- ./configure -s
- make
-
-14. Why does "make test" fail on Mac OS X?
-
- Mac OS X already includes zlib as a shared library, and so -lz links the
- shared library instead of the one that the "make" compiled. For zlib
- 1.1.3, the two are incompatible due to different compile-time
- options. Simply change the -lz in the Makefile to libz.a, and it will use
- the compiled library instead of the shared one and the "make test" will
- succeed.
-
-15. I have a question about OttoPDF
-
- We are not the authors of OttoPDF. The real author is on the OttoPDF web
- site Joel Hainley jhainley@myndkryme.com.
diff --git a/common/zlib/INDEX b/common/zlib/INDEX
deleted file mode 100644
index 8a24576..0000000
--- a/common/zlib/INDEX
+++ /dev/null
@@ -1,86 +0,0 @@
-ChangeLog history of changes
-INDEX this file
-FAQ Frequently Asked Questions about zlib
-Make_vms.com script for Vax/VMS
-Makefile makefile for Unix (generated by configure)
-Makefile.in makefile for Unix (template for configure)
-Makefile.riscos makefile for RISCOS
-README guess what
-algorithm.txt description of the (de)compression algorithm
-configure configure script for Unix
-descrip.mms makefile for Vax/VMS
-zlib.3 mini man page for zlib (volunteers to write full
- man pages from zlib.h welcome. write to jloup@gzip.org)
-
-amiga/Makefile.sas makefile for Amiga SAS/C
-amiga/Makefile.pup makefile for Amiga powerUP SAS/C PPC
-
-msdos/Makefile.w32 makefile for Microsoft Visual C++ 32-bit
-msdos/Makefile.b32 makefile for Borland C++ 32-bit
-msdos/Makefile.bor makefile for Borland C/C++ 16-bit
-msdos/Makefile.dj2 makefile for DJGPP 2.x
-msdos/Makefile.emx makefile for EMX 0.9c (32-bit DOS/OS2)
-msdos/Makefile.msc makefile for Microsoft C 16-bit
-msdos/Makefile.tc makefile for Turbo C
-msdos/Makefile.wat makefile for Watcom C
-msdos/zlib.def definition file for Windows DLL
-msdos/zlib.rc definition file for Windows DLL
-
-nt/Makefile.nt makefile for Windows NT
-nt/zlib.dnt definition file for Windows NT DLL
-nt/Makefile.emx makefile for EMX 0.9c/RSXNT 1.41 (Win32 Intel)
-nt/Makefile.gcc makefile for Windows NT using GCC (mingw32)
-
-
- zlib public header files (must be kept):
-zconf.h
-zlib.h
-
- private source files used to build the zlib library:
-adler32.c
-compress.c
-crc32.c
-deflate.c
-deflate.h
-gzio.c
-infblock.c
-infblock.h
-infcodes.c
-infcodes.h
-inffast.c
-inffast.h
-inflate.c
-inftrees.c
-inftrees.h
-infutil.c
-infutil.h
-maketree.c
-trees.c
-uncompr.c
-zutil.c
-zutil.h
-
- source files for sample programs:
-example.c
-minigzip.c
-
- unsupported contribution by third parties
-
-contrib/asm386/ by Gilles Vollant <info@winimage.com>
- 386 asm code replacing longest_match().
-
-contrib/minizip/ by Gilles Vollant <info@winimage.com>
- Mini zip and unzip based on zlib
- See http://www.winimage.com/zLibDll/unzip.html
-
-contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
- A C++ I/O streams interface to the zlib gz* functions
-
-contrib/iostream2/ by Tyge Løvset <Tyge.Lovset@cmr.no>
- Another C++ I/O streams interface
-
-contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
- A very simple tar.gz extractor using zlib
-
-contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
- How to use compress(), uncompress() and the gz* functions from VB.
diff --git a/common/zlib/Make_vms.com b/common/zlib/Make_vms.com
deleted file mode 100644
index 1c57e8f..0000000
--- a/common/zlib/Make_vms.com
+++ /dev/null
@@ -1,115 +0,0 @@
-$! make libz under VMS
-$! written by Martin P.J. Zinser <m.zinser@gsi.de>
-$!
-$! Look for the compiler used
-$!
-$ ccopt = ""
-$ if f$getsyi("HW_MODEL").ge.1024
-$ then
-$ ccopt = "/prefix=all"+ccopt
-$ comp = "__decc__=1"
-$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ else
-$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
-$ then
-$ comp = "__vaxc__=1"
-$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ else
-$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include:
-$ ccopt = "/decc/prefix=all"+ccopt
-$ comp = "__decc__=1"
-$ endif
-$ endif
-$!
-$! Build the thing plain or with mms
-$!
-$ write sys$output "Compiling Zlib sources ..."
-$ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
-$ then
-$ dele example.obj;*,minigzip.obj;*
-$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
- adler32.c zlib.h zconf.h
-$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
- compress.c zlib.h zconf.h
-$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
- crc32.c zlib.h zconf.h
-$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
- deflate.c deflate.h zutil.h zlib.h zconf.h
-$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
- gzio.c zutil.h zlib.h zconf.h
-$ CALL MAKE infblock.OBJ "CC ''CCOPT' infblock" -
- infblock.c zutil.h zlib.h zconf.h infblock.h
-$ CALL MAKE infcodes.OBJ "CC ''CCOPT' infcodes" -
- infcodes.c zutil.h zlib.h zconf.h inftrees.h
-$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
- inffast.c zutil.h zlib.h zconf.h inffast.h
-$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
- inflate.c zutil.h zlib.h zconf.h infblock.h
-$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
- inftrees.c zutil.h zlib.h zconf.h inftrees.h
-$ CALL MAKE infutil.OBJ "CC ''CCOPT' infutil" -
- infutil.c zutil.h zlib.h zconf.h inftrees.h infutil.h
-$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
- trees.c deflate.h zutil.h zlib.h zconf.h
-$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
- uncompr.c zlib.h zconf.h
-$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
- zutil.c zutil.h zlib.h zconf.h
-$ write sys$output "Building Zlib ..."
-$ CALL MAKE libz.OLB "lib/crea libz.olb *.obj" *.OBJ
-$ write sys$output "Building example..."
-$ CALL MAKE example.OBJ "CC ''CCOPT' example" -
- example.c zlib.h zconf.h
-$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$ write sys$output "Building minigzip..."
-$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
- minigzip.c zlib.h zconf.h
-$ call make minigzip.exe -
- "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
- minigzip.obj libz.olb
-$ else
-$ mms/macro=('comp')
-$ endif
-$ write sys$output "Zlib build completed"
-$ exit
-$!
-$!
-$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
-$ V = 'F$Verify(0)
-$! P1 = What we are trying to make
-$! P2 = Command to make it
-$! P3 - P8 What it depends on
-$
-$ If F$Search(P1) .Eqs. "" Then Goto Makeit
-$ Time = F$CvTime(F$File(P1,"RDT"))
-$arg=3
-$Loop:
-$ Argument = P'arg
-$ If Argument .Eqs. "" Then Goto Exit
-$ El=0
-$Loop2:
-$ File = F$Element(El," ",Argument)
-$ If File .Eqs. " " Then Goto Endl
-$ AFile = ""
-$Loop3:
-$ OFile = AFile
-$ AFile = F$Search(File)
-$ If AFile .Eqs. "" .Or. AFile .Eqs. OFile Then Goto NextEl
-$ If F$CvTime(F$File(AFile,"RDT")) .Ges. Time Then Goto Makeit
-$ Goto Loop3
-$NextEL:
-$ El = El + 1
-$ Goto Loop2
-$EndL:
-$ arg=arg+1
-$ If arg .Le. 8 Then Goto Loop
-$ Goto Exit
-$
-$Makeit:
-$ VV=F$VERIFY(0)
-$ write sys$output P2
-$ 'P2
-$ VV='F$Verify(VV)
-$Exit:
-$ If V Then Set Verify
-$ENDSUBROUTINE
diff --git a/common/zlib/Makefile.riscos b/common/zlib/Makefile.riscos
deleted file mode 100644
index d97f449..0000000
--- a/common/zlib/Makefile.riscos
+++ /dev/null
@@ -1,151 +0,0 @@
-# Project: zlib_1_03
-# Patched for zlib 1.1.2 rw@shadow.org.uk 19980430
-# test works out-of-the-box, installs `somewhere' on demand
-
-# Toolflags:
-CCflags = -c -depend !Depend -IC: -g -throwback -DRISCOS -fah
-C++flags = -c -depend !Depend -IC: -throwback
-Linkflags = -aif -c++ -o $@
-ObjAsmflags = -throwback -NoCache -depend !Depend
-CMHGflags =
-LibFileflags = -c -l -o $@
-Squeezeflags = -o $@
-
-# change the line below to where _you_ want the library installed.
-libdest = lib:zlib
-
-# Final targets:
-@.lib: @.o.adler32 @.o.compress @.o.crc32 @.o.deflate @.o.gzio \
- @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil @.o.trees \
- @.o.uncompr @.o.zutil
- LibFile $(LibFileflags) @.o.adler32 @.o.compress @.o.crc32 @.o.deflate \
- @.o.gzio @.o.infblock @.o.infcodes @.o.inffast @.o.inflate @.o.inftrees @.o.infutil \
- @.o.trees @.o.uncompr @.o.zutil
-test: @.minigzip @.example @.lib
- @copy @.lib @.libc A~C~DF~L~N~P~Q~RS~TV
- @echo running tests: hang on.
- @/@.minigzip -f -9 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -f -1 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -h -9 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -h -1 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -9 libc
- @/@.minigzip -d libc-gz
- @/@.minigzip -1 libc
- @/@.minigzip -d libc-gz
- @diff @.lib @.libc
- @echo that should have reported '@.lib and @.libc identical' if you have diff.
- @/@.example @.fred @.fred
- @echo that will have given lots of hello!'s.
-
-@.minigzip: @.o.minigzip @.lib C:o.Stubs
- Link $(Linkflags) @.o.minigzip @.lib C:o.Stubs
-@.example: @.o.example @.lib C:o.Stubs
- Link $(Linkflags) @.o.example @.lib C:o.Stubs
-
-install: @.lib
- cdir $(libdest)
- cdir $(libdest).h
- @copy @.h.zlib $(libdest).h.zlib A~C~DF~L~N~P~Q~RS~TV
- @copy @.h.zconf $(libdest).h.zconf A~C~DF~L~N~P~Q~RS~TV
- @copy @.lib $(libdest).lib A~C~DF~L~N~P~Q~RS~TV
- @echo okay, installed zlib in $(libdest)
-
-clean:; remove @.minigzip
- remove @.example
- remove @.libc
- -wipe @.o.* F~r~cV
- remove @.fred
-
-# User-editable dependencies:
-.c.o:
- cc $(ccflags) -o $@ $<
-
-# Static dependencies:
-
-# Dynamic dependencies:
-o.example: c.example
-o.example: h.zlib
-o.example: h.zconf
-o.minigzip: c.minigzip
-o.minigzip: h.zlib
-o.minigzip: h.zconf
-o.adler32: c.adler32
-o.adler32: h.zlib
-o.adler32: h.zconf
-o.compress: c.compress
-o.compress: h.zlib
-o.compress: h.zconf
-o.crc32: c.crc32
-o.crc32: h.zlib
-o.crc32: h.zconf
-o.deflate: c.deflate
-o.deflate: h.deflate
-o.deflate: h.zutil
-o.deflate: h.zlib
-o.deflate: h.zconf
-o.gzio: c.gzio
-o.gzio: h.zutil
-o.gzio: h.zlib
-o.gzio: h.zconf
-o.infblock: c.infblock
-o.infblock: h.zutil
-o.infblock: h.zlib
-o.infblock: h.zconf
-o.infblock: h.infblock
-o.infblock: h.inftrees
-o.infblock: h.infcodes
-o.infblock: h.infutil
-o.infcodes: c.infcodes
-o.infcodes: h.zutil
-o.infcodes: h.zlib
-o.infcodes: h.zconf
-o.infcodes: h.inftrees
-o.infcodes: h.infblock
-o.infcodes: h.infcodes
-o.infcodes: h.infutil
-o.infcodes: h.inffast
-o.inffast: c.inffast
-o.inffast: h.zutil
-o.inffast: h.zlib
-o.inffast: h.zconf
-o.inffast: h.inftrees
-o.inffast: h.infblock
-o.inffast: h.infcodes
-o.inffast: h.infutil
-o.inffast: h.inffast
-o.inflate: c.inflate
-o.inflate: h.zutil
-o.inflate: h.zlib
-o.inflate: h.zconf
-o.inflate: h.infblock
-o.inftrees: c.inftrees
-o.inftrees: h.zutil
-o.inftrees: h.zlib
-o.inftrees: h.zconf
-o.inftrees: h.inftrees
-o.inftrees: h.inffixed
-o.infutil: c.infutil
-o.infutil: h.zutil
-o.infutil: h.zlib
-o.infutil: h.zconf
-o.infutil: h.infblock
-o.infutil: h.inftrees
-o.infutil: h.infcodes
-o.infutil: h.infutil
-o.trees: c.trees
-o.trees: h.deflate
-o.trees: h.zutil
-o.trees: h.zlib
-o.trees: h.zconf
-o.trees: h.trees
-o.uncompr: c.uncompr
-o.uncompr: h.zlib
-o.uncompr: h.zconf
-o.zutil: c.zutil
-o.zutil: h.zutil
-o.zutil: h.zlib
-o.zutil: h.zconf
diff --git a/common/zlib/README b/common/zlib/README
index 29d6714..58c81df 100644
--- a/common/zlib/README
+++ b/common/zlib/README
@@ -1,147 +1,2 @@
-zlib 1.1.4 is a general purpose data compression library. All the code
-is thread safe. The data format used by the zlib library
-is described by RFCs (Request for Comments) 1950 to 1952 in the files
-http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate
-format) and rfc1952.txt (gzip format). These documents are also available in
-other formats from ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
-
-All functions of the compression library are documented in the file zlib.h
-(volunteer to write man pages welcome, contact jloup@gzip.org). A usage
-example of the library is given in the file example.c which also tests that
-the library is working correctly. Another example is given in the file
-minigzip.c. The compression library itself is composed of all source files
-except example.c and minigzip.c.
-
-To compile all files and run the test program, follow the instructions
-given at the top of Makefile. In short "make test; make install"
-should work for most machines. For Unix: "./configure; make test; make install"
-For MSDOS, use one of the special makefiles such as Makefile.msc.
-For VMS, use Make_vms.com or descrip.mms.
-
-Questions about zlib should be sent to <zlib@gzip.org>, or to
-Gilles Vollant <info@winimage.com> for the Windows DLL version.
-The zlib home page is http://www.zlib.org or http://www.gzip.org/zlib/
-Before reporting a problem, please check this site to verify that
-you have the latest version of zlib; otherwise get the latest version and
-check whether the problem still exists or not.
-
-PLEASE read the zlib FAQ http://www.gzip.org/zlib/zlib_faq.html
-before asking for help.
-
-Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
-issue of Dr. Dobb's Journal; a copy of the article is available in
-http://dogma.net/markn/articles/zlibtool/zlibtool.htm
-
-The changes made in version 1.1.4 are documented in the file ChangeLog.
-The only changes made since 1.1.3 are bug corrections:
-
-- ZFREE was repeated on same allocation on some error conditions.
- This creates a security problem described in
- http://www.zlib.org/advisory-2002-03-11.txt
-- Returned incorrect error (Z_MEM_ERROR) on some invalid data
-- Avoid accesses before window for invalid distances with inflate window
- less than 32K.
-- force windowBits > 8 to avoid a bug in the encoder for a window size
- of 256 bytes. (A complete fix will be available in 1.1.5).
-
-The beta version 1.1.5beta includes many more changes. A new official
-version 1.1.5 will be released as soon as extensive testing has been
-completed on it.
-
-
-Unsupported third party contributions are provided in directory "contrib".
-
-A Java implementation of zlib is available in the Java Development Kit
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
-See the zlib home page http://www.zlib.org for details.
-
-A Perl interface to zlib written by Paul Marquess <pmarquess@bfsec.bt.co.uk>
-is in the CPAN (Comprehensive Perl Archive Network) sites
-http://www.cpan.org/modules/by-module/Compress/
-
-A Python interface to zlib written by A.M. Kuchling <amk@magnet.com>
-is available in Python 1.5 and later versions, see
-http://www.python.org/doc/lib/module-zlib.html
-
-A zlib binding for TCL written by Andreas Kupries <a.kupries@westend.com>
-is availlable at http://www.westend.com/~kupries/doc/trf/man/man.html
-
-An experimental package to read and write files in .zip format,
-written on top of zlib by Gilles Vollant <info@winimage.com>, is
-available at http://www.winimage.com/zLibDll/unzip.html
-and also in the contrib/minizip directory of zlib.
-
-
-Notes for some targets:
-
-- To build a Windows DLL version, include in a DLL project zlib.def, zlib.rc
- and all .c files except example.c and minigzip.c; compile with -DZLIB_DLL
- The zlib DLL support was initially done by Alessandro Iacopetti and is
- now maintained by Gilles Vollant <info@winimage.com>. Check the zlib DLL
- home page at http://www.winimage.com/zLibDll
-
- From Visual Basic, you can call the DLL functions which do not take
- a structure as argument: compress, uncompress and all gz* functions.
- See contrib/visual-basic.txt for more information, or get
- http://www.tcfb.com/dowseware/cmp-z-it.zip
-
-- For 64-bit Irix, deflate.c must be compiled without any optimization.
- With -O, one libpng test fails. The test works in 32 bit mode (with
- the -n32 compiler flag). The compiler bug has been reported to SGI.
-
-- zlib doesn't work with gcc 2.6.3 on a DEC 3000/300LX under OSF/1 2.1
- it works when compiled with cc.
-
-- on Digital Unix 4.0D (formely OSF/1) on AlphaServer, the cc option -std1
- is necessary to get gzprintf working correctly. This is done by configure.
-
-- zlib doesn't work on HP-UX 9.05 with some versions of /bin/cc. It works
- with other compilers. Use "make test" to check your compiler.
-
-- gzdopen is not supported on RISCOS, BEOS and by some Mac compilers.
-
-- For Turbo C the small model is supported only with reduced performance to
- avoid any far allocation; it was tested with -DMAX_WBITS=11 -DMAX_MEM_LEVEL=3
-
-- For PalmOs, see http://www.cs.uit.no/~perm/PASTA/pilot/software.html
- Per Harald Myrvang <perm@stud.cs.uit.no>
-
-
-Acknowledgments:
-
- The deflate format used by zlib was defined by Phil Katz. The deflate
- and zlib specifications were written by L. Peter Deutsch. Thanks to all the
- people who reported problems and suggested various improvements in zlib;
- they are too numerous to cite here.
-
-Copyright notice:
-
- (C) 1995-2002 Jean-loup Gailly and Mark Adler
-
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
-
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
-
- 1. The origin of this software must not be misrepresented; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- 2. Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- 3. This notice may not be removed or altered from any source distribution.
-
- Jean-loup Gailly Mark Adler
- jloup@gzip.org madler@alumni.caltech.edu
-
-If you use the zlib library in a product, we would appreciate *not*
-receiving lengthy legal documents to sign. The sources are provided
-for free but without warranty of any kind. The library has been
-entirely written by Jean-loup Gailly and Mark Adler; it does not
-include third-party code.
-
-If you redistribute modified sources, we would appreciate that you include
-in the file ChangeLog history information documenting your changes.
+This is a local copy of the zlib library, version 1.1.4. Unneeded parts are
+removed, check http://zlib.net for full source and more information.
diff --git a/common/zlib/algorithm.txt b/common/zlib/algorithm.txt
deleted file mode 100644
index cdc830b..0000000
--- a/common/zlib/algorithm.txt
+++ /dev/null
@@ -1,213 +0,0 @@
-1. Compression algorithm (deflate)
-
-The deflation algorithm used by gzip (also zip and zlib) is a variation of
-LZ77 (Lempel-Ziv 1977, see reference below). It finds duplicated strings in
-the input data. The second occurrence of a string is replaced by a
-pointer to the previous string, in the form of a pair (distance,
-length). Distances are limited to 32K bytes, and lengths are limited
-to 258 bytes. When a string does not occur anywhere in the previous
-32K bytes, it is emitted as a sequence of literal bytes. (In this
-description, `string' must be taken as an arbitrary sequence of bytes,
-and is not restricted to printable characters.)
-
-Literals or match lengths are compressed with one Huffman tree, and
-match distances are compressed with another tree. The trees are stored
-in a compact form at the start of each block. The blocks can have any
-size (except that the compressed data for one block must fit in
-available memory). A block is terminated when deflate() determines that
-it would be useful to start another block with fresh trees. (This is
-somewhat similar to the behavior of LZW-based _compress_.)
-
-Duplicated strings are found using a hash table. All input strings of
-length 3 are inserted in the hash table. A hash index is computed for
-the next 3 bytes. If the hash chain for this index is not empty, all
-strings in the chain are compared with the current input string, and
-the longest match is selected.
-
-The hash chains are searched starting with the most recent strings, to
-favor small distances and thus take advantage of the Huffman encoding.
-The hash chains are singly linked. There are no deletions from the
-hash chains, the algorithm simply discards matches that are too old.
-
-To avoid a worst-case situation, very long hash chains are arbitrarily
-truncated at a certain length, determined by a runtime option (level
-parameter of deflateInit). So deflate() does not always find the longest
-possible match but generally finds a match which is long enough.
-
-deflate() also defers the selection of matches with a lazy evaluation
-mechanism. After a match of length N has been found, deflate() searches for
-a longer match at the next input byte. If a longer match is found, the
-previous match is truncated to a length of one (thus producing a single
-literal byte) and the process of lazy evaluation begins again. Otherwise,
-the original match is kept, and the next match search is attempted only N
-steps later.
-
-The lazy match evaluation is also subject to a runtime parameter. If
-the current match is long enough, deflate() reduces the search for a longer
-match, thus speeding up the whole process. If compression ratio is more
-important than speed, deflate() attempts a complete second search even if
-the first match is already long enough.
-
-The lazy match evaluation is not performed for the fastest compression
-modes (level parameter 1 to 3). For these fast modes, new strings
-are inserted in the hash table only when no match was found, or
-when the match is not too long. This degrades the compression ratio
-but saves time since there are both fewer insertions and fewer searches.
-
-
-2. Decompression algorithm (inflate)
-
-2.1 Introduction
-
-The real question is, given a Huffman tree, how to decode fast. The most
-important realization is that shorter codes are much more common than
-longer codes, so pay attention to decoding the short codes fast, and let
-the long codes take longer to decode.
-
-inflate() sets up a first level table that covers some number of bits of
-input less than the length of longest code. It gets that many bits from the
-stream, and looks it up in the table. The table will tell if the next
-code is that many bits or less and how many, and if it is, it will tell
-the value, else it will point to the next level table for which inflate()
-grabs more bits and tries to decode a longer code.
-
-How many bits to make the first lookup is a tradeoff between the time it
-takes to decode and the time it takes to build the table. If building the
-table took no time (and if you had infinite memory), then there would only
-be a first level table to cover all the way to the longest code. However,
-building the table ends up taking a lot longer for more bits since short
-codes are replicated many times in such a table. What inflate() does is
-simply to make the number of bits in the first table a variable, and set it
-for the maximum speed.
-
-inflate() sends new trees relatively often, so it is possibly set for a
-smaller first level table than an application that has only one tree for
-all the data. For inflate, which has 286 possible codes for the
-literal/length tree, the size of the first table is nine bits. Also the
-distance trees have 30 possible values, and the size of the first table is
-six bits. Note that for each of those cases, the table ended up one bit
-longer than the ``average'' code length, i.e. the code length of an
-approximately flat code which would be a little more than eight bits for
-286 symbols and a little less than five bits for 30 symbols. It would be
-interesting to see if optimizing the first level table for other
-applications gave values within a bit or two of the flat code size.
-
-
-2.2 More details on the inflate table lookup
-
-Ok, you want to know what this cleverly obfuscated inflate tree actually
-looks like. You are correct that it's not a Huffman tree. It is simply a
-lookup table for the first, let's say, nine bits of a Huffman symbol. The
-symbol could be as short as one bit or as long as 15 bits. If a particular
-symbol is shorter than nine bits, then that symbol's translation is duplicated
-in all those entries that start with that symbol's bits. For example, if the
-symbol is four bits, then it's duplicated 32 times in a nine-bit table. If a
-symbol is nine bits long, it appears in the table once.
-
-If the symbol is longer than nine bits, then that entry in the table points
-to another similar table for the remaining bits. Again, there are duplicated
-entries as needed. The idea is that most of the time the symbol will be short
-and there will only be one table look up. (That's whole idea behind data
-compression in the first place.) For the less frequent long symbols, there
-will be two lookups. If you had a compression method with really long
-symbols, you could have as many levels of lookups as is efficient. For
-inflate, two is enough.
-
-So a table entry either points to another table (in which case nine bits in
-the above example are gobbled), or it contains the translation for the symbol
-and the number of bits to gobble. Then you start again with the next
-ungobbled bit.
-
-You may wonder: why not just have one lookup table for how ever many bits the
-longest symbol is? The reason is that if you do that, you end up spending
-more time filling in duplicate symbol entries than you do actually decoding.
-At least for deflate's output that generates new trees every several 10's of
-kbytes. You can imagine that filling in a 2^15 entry table for a 15-bit code
-would take too long if you're only decoding several thousand symbols. At the
-other extreme, you could make a new table for every bit in the code. In fact,
-that's essentially a Huffman tree. But then you spend two much time
-traversing the tree while decoding, even for short symbols.
-
-So the number of bits for the first lookup table is a trade of the time to
-fill out the table vs. the time spent looking at the second level and above of
-the table.
-
-Here is an example, scaled down:
-
-The code being decoded, with 10 symbols, from 1 to 6 bits long:
-
-A: 0
-B: 10
-C: 1100
-D: 11010
-E: 11011
-F: 11100
-G: 11101
-H: 11110
-I: 111110
-J: 111111
-
-Let's make the first table three bits long (eight entries):
-
-000: A,1
-001: A,1
-010: A,1
-011: A,1
-100: B,2
-101: B,2
-110: -> table X (gobble 3 bits)
-111: -> table Y (gobble 3 bits)
-
-Each entry is what the bits decode to and how many bits that is, i.e. how
-many bits to gobble. Or the entry points to another table, with the number of
-bits to gobble implicit in the size of the table.
-
-Table X is two bits long since the longest code starting with 110 is five bits
-long:
-
-00: C,1
-01: C,1
-10: D,2
-11: E,2
-
-Table Y is three bits long since the longest code starting with 111 is six
-bits long:
-
-000: F,2
-001: F,2
-010: G,2
-011: G,2
-100: H,2
-101: H,2
-110: I,3
-111: J,3
-
-So what we have here are three tables with a total of 20 entries that had to
-be constructed. That's compared to 64 entries for a single table. Or
-compared to 16 entries for a Huffman tree (six two entry tables and one four
-entry table). Assuming that the code ideally represents the probability of
-the symbols, it takes on the average 1.25 lookups per symbol. That's compared
-to one lookup for the single table, or 1.66 lookups per symbol for the
-Huffman tree.
-
-There, I think that gives you a picture of what's going on. For inflate, the
-meaning of a particular symbol is often more than just a letter. It can be a
-byte (a "literal"), or it can be either a length or a distance which
-indicates a base value and a number of bits to fetch after the code that is
-added to the base value. Or it might be the special end-of-block code. The
-data structures created in inftrees.c try to encode all that information
-compactly in the tables.
-
-
-Jean-loup Gailly Mark Adler
-jloup@gzip.org madler@alumni.caltech.edu
-
-
-References:
-
-[LZ77] Ziv J., Lempel A., ``A Universal Algorithm for Sequential Data
-Compression,'' IEEE Transactions on Information Theory, Vol. 23, No. 3,
-pp. 337-343.
-
-``DEFLATE Compressed Data Format Specification'' available in
-ftp://ds.internic.net/rfc/rfc1951.txt
diff --git a/common/zlib/descrip.mms b/common/zlib/descrip.mms
deleted file mode 100644
index 9d36459..0000000
--- a/common/zlib/descrip.mms
+++ /dev/null
@@ -1,48 +0,0 @@
-# descrip.mms: MMS description file for building zlib on VMS
-# written by Martin P.J. Zinser <m.zinser@gsi.de>
-
-cc_defs =
-c_deb =
-
-.ifdef __DECC__
-pref = /prefix=all
-.endif
-
-OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj,\
- deflate.obj, trees.obj, zutil.obj, inflate.obj, infblock.obj,\
- inftrees.obj, infcodes.obj, infutil.obj, inffast.obj
-
-CFLAGS= $(C_DEB) $(CC_DEFS) $(PREF)
-
-all : example.exe minigzip.exe
- @ write sys$output " Example applications available"
-libz.olb : libz.olb($(OBJS))
- @ write sys$output " libz available"
-
-example.exe : example.obj libz.olb
- link example,libz.olb/lib
-
-minigzip.exe : minigzip.obj libz.olb
- link minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
-
-clean :
- delete *.obj;*,libz.olb;*
-
-
-# Other dependencies.
-adler32.obj : zutil.h zlib.h zconf.h
-compress.obj : zlib.h zconf.h
-crc32.obj : zutil.h zlib.h zconf.h
-deflate.obj : deflate.h zutil.h zlib.h zconf.h
-example.obj : zlib.h zconf.h
-gzio.obj : zutil.h zlib.h zconf.h
-infblock.obj : zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-infcodes.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h infcodes.h inffast.h
-inffast.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h inffast.h
-inflate.obj : zutil.h zlib.h zconf.h infblock.h
-inftrees.obj : zutil.h zlib.h zconf.h inftrees.h
-infutil.obj : zutil.h zlib.h zconf.h inftrees.h infutil.h
-minigzip.obj : zlib.h zconf.h
-trees.obj : deflate.h zutil.h zlib.h zconf.h
-uncompr.obj : zlib.h zconf.h
-zutil.obj : zutil.h zlib.h zconf.h
diff --git a/common/zlib/example.c b/common/zlib/example.c
deleted file mode 100644
index 255662f..0000000
--- a/common/zlib/example.c
+++ /dev/null
@@ -1,556 +0,0 @@
-/* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id: example.c,v 1.1 2004/10/08 09:44:25 const_k Exp $ */
-
-#include <stdio.h>
-#include "zlib.h"
-
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#else
- extern void exit OF((int));
-#endif
-
-#if defined(VMS) || defined(RISCOS)
-# define TESTFILE "foo-gz"
-#else
-# define TESTFILE "foo.gz"
-#endif
-
-#define CHECK_ERR(err, msg) { \
- if (err != Z_OK) { \
- fprintf(stderr, "%s error: %d\n", msg, err); \
- exit(1); \
- } \
-}
-
-const char hello[] = "hello, hello!";
-/* "hello world" would be more standard, but the repeated "hello"
- * stresses the compression code better, sorry...
- */
-
-const char dictionary[] = "hello";
-uLong dictId; /* Adler32 value of the dictionary */
-
-void test_compress OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_gzio OF((const char *out, const char *in,
- Byte *uncompr, int uncomprLen));
-void test_deflate OF((Byte *compr, uLong comprLen));
-void test_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_large_deflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_large_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_flush OF((Byte *compr, uLong *comprLen));
-void test_sync OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-void test_dict_deflate OF((Byte *compr, uLong comprLen));
-void test_dict_inflate OF((Byte *compr, uLong comprLen,
- Byte *uncompr, uLong uncomprLen));
-int main OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Test compress() and uncompress()
- */
-void test_compress(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- uLong len = strlen(hello)+1;
-
- err = compress(compr, &comprLen, (const Bytef*)hello, len);
- CHECK_ERR(err, "compress");
-
- strcpy((char*)uncompr, "garbage");
-
- err = uncompress(uncompr, &uncomprLen, compr, comprLen);
- CHECK_ERR(err, "uncompress");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad uncompress\n");
- exit(1);
- } else {
- printf("uncompress(): %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Test read/write of .gz files
- */
-void test_gzio(out, in, uncompr, uncomprLen)
- const char *out; /* compressed output file */
- const char *in; /* compressed input file */
- Byte *uncompr;
- int uncomprLen;
-{
- int err;
- int len = strlen(hello)+1;
- gzFile file;
- z_off_t pos;
-
- file = gzopen(out, "wb");
- if (file == NULL) {
- fprintf(stderr, "gzopen error\n");
- exit(1);
- }
- gzputc(file, 'h');
- if (gzputs(file, "ello") != 4) {
- fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (gzprintf(file, ", %s!", "hello") != 8) {
- fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
- exit(1);
- }
- gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
- gzclose(file);
-
- file = gzopen(in, "rb");
- if (file == NULL) {
- fprintf(stderr, "gzopen error\n");
- }
- strcpy((char*)uncompr, "garbage");
-
- uncomprLen = gzread(file, uncompr, (unsigned)uncomprLen);
- if (uncomprLen != len) {
- fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
- exit(1);
- } else {
- printf("gzread(): %s\n", (char *)uncompr);
- }
-
- pos = gzseek(file, -8L, SEEK_CUR);
- if (pos != 6 || gztell(file) != pos) {
- fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
- (long)pos, (long)gztell(file));
- exit(1);
- }
-
- if (gzgetc(file) != ' ') {
- fprintf(stderr, "gzgetc error\n");
- exit(1);
- }
-
- gzgets(file, (char*)uncompr, uncomprLen);
- uncomprLen = strlen((char*)uncompr);
- if (uncomprLen != 6) { /* "hello!" */
- fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
- exit(1);
- }
- if (strcmp((char*)uncompr, hello+7)) {
- fprintf(stderr, "bad gzgets after gzseek\n");
- exit(1);
- } else {
- printf("gzgets() after gzseek: %s\n", (char *)uncompr);
- }
-
- gzclose(file);
-}
-
-/* ===========================================================================
- * Test deflate() with small buffers
- */
-void test_deflate(compr, comprLen)
- Byte *compr;
- uLong comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
- int len = strlen(hello)+1;
-
- c_stream.zalloc = (alloc_func)0;
- c_stream.zfree = (free_func)0;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.next_out = compr;
-
- while (c_stream.total_in != (uLong)len && c_stream.total_out < comprLen) {
- c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
- }
- /* Finish the stream, still forcing small buffers: */
- for (;;) {
- c_stream.avail_out = 1;
- err = deflate(&c_stream, Z_FINISH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "deflate");
- }
-
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with small buffers
- */
-void test_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = (alloc_func)0;
- d_stream.zfree = (free_func)0;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = 0;
- d_stream.next_out = uncompr;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
- d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "inflate");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad inflate\n");
- exit(1);
- } else {
- printf("inflate(): %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Test deflate() with large buffers and dynamic change of compression level
- */
-void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
-
- c_stream.zalloc = (alloc_func)0;
- c_stream.zfree = (free_func)0;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_BEST_SPEED);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_out = compr;
- c_stream.avail_out = (uInt)comprLen;
-
- /* At this point, uncompr is still mostly zeroes, so it should compress
- * very well:
- */
- c_stream.next_in = uncompr;
- c_stream.avail_in = (uInt)uncomprLen;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
- if (c_stream.avail_in != 0) {
- fprintf(stderr, "deflate not greedy\n");
- exit(1);
- }
-
- /* Feed in already compressed data and switch to no compression: */
- deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
- c_stream.next_in = compr;
- c_stream.avail_in = (uInt)comprLen/2;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
-
- /* Switch back to compressing mode: */
- deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
- c_stream.next_in = uncompr;
- c_stream.avail_in = (uInt)uncomprLen;
- err = deflate(&c_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "deflate");
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- fprintf(stderr, "deflate should report Z_STREAM_END\n");
- exit(1);
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with large buffers
- */
-void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = (alloc_func)0;
- d_stream.zfree = (free_func)0;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = (uInt)comprLen;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- for (;;) {
- d_stream.next_out = uncompr; /* discard the output */
- d_stream.avail_out = (uInt)uncomprLen;
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- CHECK_ERR(err, "large inflate");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
- fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
- exit(1);
- } else {
- printf("large_inflate(): OK\n");
- }
-}
-
-/* ===========================================================================
- * Test deflate() with full flush
- */
-void test_flush(compr, comprLen)
- Byte *compr;
- uLong *comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
- int len = strlen(hello)+1;
-
- c_stream.zalloc = (alloc_func)0;
- c_stream.zfree = (free_func)0;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.next_out = compr;
- c_stream.avail_in = 3;
- c_stream.avail_out = (uInt)*comprLen;
- err = deflate(&c_stream, Z_FULL_FLUSH);
- CHECK_ERR(err, "deflate");
-
- compr[3]++; /* force an error in first compressed block */
- c_stream.avail_in = len - 3;
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- CHECK_ERR(err, "deflate");
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-
- *comprLen = c_stream.total_out;
-}
-
-/* ===========================================================================
- * Test inflateSync()
- */
-void test_sync(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = (alloc_func)0;
- d_stream.zfree = (free_func)0;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = 2; /* just read the zlib header */
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- d_stream.next_out = uncompr;
- d_stream.avail_out = (uInt)uncomprLen;
-
- inflate(&d_stream, Z_NO_FLUSH);
- CHECK_ERR(err, "inflate");
-
- d_stream.avail_in = (uInt)comprLen-2; /* read all compressed data */
- err = inflateSync(&d_stream); /* but skip the damaged part */
- CHECK_ERR(err, "inflateSync");
-
- err = inflate(&d_stream, Z_FINISH);
- if (err != Z_DATA_ERROR) {
- fprintf(stderr, "inflate should report DATA_ERROR\n");
- /* Because of incorrect adler32 */
- exit(1);
- }
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- printf("after inflateSync(): hel%s\n", (char *)uncompr);
-}
-
-/* ===========================================================================
- * Test deflate() with preset dictionary
- */
-void test_dict_deflate(compr, comprLen)
- Byte *compr;
- uLong comprLen;
-{
- z_stream c_stream; /* compression stream */
- int err;
-
- c_stream.zalloc = (alloc_func)0;
- c_stream.zfree = (free_func)0;
- c_stream.opaque = (voidpf)0;
-
- err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
- CHECK_ERR(err, "deflateInit");
-
- err = deflateSetDictionary(&c_stream,
- (const Bytef*)dictionary, sizeof(dictionary));
- CHECK_ERR(err, "deflateSetDictionary");
-
- dictId = c_stream.adler;
- c_stream.next_out = compr;
- c_stream.avail_out = (uInt)comprLen;
-
- c_stream.next_in = (Bytef*)hello;
- c_stream.avail_in = (uInt)strlen(hello)+1;
-
- err = deflate(&c_stream, Z_FINISH);
- if (err != Z_STREAM_END) {
- fprintf(stderr, "deflate should report Z_STREAM_END\n");
- exit(1);
- }
- err = deflateEnd(&c_stream);
- CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with a preset dictionary
- */
-void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
- Byte *compr, *uncompr;
- uLong comprLen, uncomprLen;
-{
- int err;
- z_stream d_stream; /* decompression stream */
-
- strcpy((char*)uncompr, "garbage");
-
- d_stream.zalloc = (alloc_func)0;
- d_stream.zfree = (free_func)0;
- d_stream.opaque = (voidpf)0;
-
- d_stream.next_in = compr;
- d_stream.avail_in = (uInt)comprLen;
-
- err = inflateInit(&d_stream);
- CHECK_ERR(err, "inflateInit");
-
- d_stream.next_out = uncompr;
- d_stream.avail_out = (uInt)uncomprLen;
-
- for (;;) {
- err = inflate(&d_stream, Z_NO_FLUSH);
- if (err == Z_STREAM_END) break;
- if (err == Z_NEED_DICT) {
- if (d_stream.adler != dictId) {
- fprintf(stderr, "unexpected dictionary");
- exit(1);
- }
- err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
- sizeof(dictionary));
- }
- CHECK_ERR(err, "inflate with dict");
- }
-
- err = inflateEnd(&d_stream);
- CHECK_ERR(err, "inflateEnd");
-
- if (strcmp((char*)uncompr, hello)) {
- fprintf(stderr, "bad inflate with dict\n");
- exit(1);
- } else {
- printf("inflate with dictionary: %s\n", (char *)uncompr);
- }
-}
-
-/* ===========================================================================
- * Usage: example [output.gz [input.gz]]
- */
-
-int main(argc, argv)
- int argc;
- char *argv[];
-{
- Byte *compr, *uncompr;
- uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
- uLong uncomprLen = comprLen;
- static const char* myVersion = ZLIB_VERSION;
-
- if (zlibVersion()[0] != myVersion[0]) {
- fprintf(stderr, "incompatible zlib version\n");
- exit(1);
-
- } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
- fprintf(stderr, "warning: different zlib version\n");
- }
-
- compr = (Byte*)calloc((uInt)comprLen, 1);
- uncompr = (Byte*)calloc((uInt)uncomprLen, 1);
- /* compr and uncompr are cleared to avoid reading uninitialized
- * data and to ensure that uncompr compresses well.
- */
- if (compr == Z_NULL || uncompr == Z_NULL) {
- printf("out of memory\n");
- exit(1);
- }
- test_compress(compr, comprLen, uncompr, uncomprLen);
-
- test_gzio((argc > 1 ? argv[1] : TESTFILE),
- (argc > 2 ? argv[2] : TESTFILE),
- uncompr, (int)uncomprLen);
-
- test_deflate(compr, comprLen);
- test_inflate(compr, comprLen, uncompr, uncomprLen);
-
- test_large_deflate(compr, comprLen, uncompr, uncomprLen);
- test_large_inflate(compr, comprLen, uncompr, uncomprLen);
-
- test_flush(compr, &comprLen);
- test_sync(compr, comprLen, uncompr, uncomprLen);
- comprLen = uncomprLen;
-
- test_dict_deflate(compr, comprLen);
- test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
-
- exit(0);
- return 0; /* to avoid warning */
-}
diff --git a/common/zlib/maketree.c b/common/zlib/maketree.c
deleted file mode 100644
index a16d4b1..0000000
--- a/common/zlib/maketree.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* maketree.c -- make inffixed.h table for decoding fixed codes
- * Copyright (C) 1995-2002 Mark Adler
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
- part of the implementation of the compression library and is
- subject to change. Applications should only use zlib.h.
- */
-
-/* This program is included in the distribution for completeness.
- You do not need to compile or run this program since inffixed.h
- is already included in the distribution. To use this program
- you need to compile zlib with BUILDFIXED defined and then compile
- and link this program with the zlib library. Then the output of
- this program can be piped to inffixed.h. */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include "zutil.h"
-#include "inftrees.h"
-
-/* simplify the use of the inflate_huft type with some defines */
-#define exop word.what.Exop
-#define bits word.what.Bits
-
-/* generate initialization table for an inflate_huft structure array */
-void maketree(uInt b, inflate_huft *t)
-{
- int i, e;
-
- i = 0;
- while (1)
- {
- e = t[i].exop;
- if (e && (e & (16+64)) == 0) /* table pointer */
- {
- fprintf(stderr, "maketree: cannot initialize sub-tables!\n");
- exit(1);
- }
- if (i % 4 == 0)
- printf("\n ");
- printf(" {{{%u,%u}},%u}", t[i].exop, t[i].bits, t[i].base);
- if (++i == (1<<b))
- break;
- putchar(',');
- }
- puts("");
-}
-
-/* create the fixed tables in C initialization syntax */
-void main(void)
-{
- int r;
- uInt bl, bd;
- inflate_huft *tl, *td;
- z_stream z;
-
- z.zalloc = zcalloc;
- z.opaque = (voidpf)0;
- z.zfree = zcfree;
- r = inflate_trees_fixed(&bl, &bd, &tl, &td, &z);
- if (r)
- {
- fprintf(stderr, "inflate_trees_fixed error %d\n", r);
- return;
- }
- puts("/* inffixed.h -- table for decoding fixed codes");
- puts(" * Generated automatically by the maketree.c program");
- puts(" */");
- puts("");
- puts("/* WARNING: this file should *not* be used by applications. It is");
- puts(" part of the implementation of the compression library and is");
- puts(" subject to change. Applications should only use zlib.h.");
- puts(" */");
- puts("");
- printf("local uInt fixed_bl = %d;\n", bl);
- printf("local uInt fixed_bd = %d;\n", bd);
- printf("local inflate_huft fixed_tl[] = {");
- maketree(bl, tl);
- puts(" };");
- printf("local inflate_huft fixed_td[] = {");
- maketree(bd, td);
- puts(" };");
-}
diff --git a/common/zlib/minigzip.c b/common/zlib/minigzip.c
deleted file mode 100644
index 4050878..0000000
--- a/common/zlib/minigzip.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/* minigzip.c -- simulate gzip using the zlib compression library
- * Copyright (C) 1995-2002 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/*
- * minigzip is a minimal implementation of the gzip utility. This is
- * only an example of using zlib and isn't meant to replace the
- * full-featured gzip. No attempt is made to deal with file systems
- * limiting names to 14 or 8+3 characters, etc... Error checking is
- * very limited. So use minigzip only for testing; use gzip for the
- * real thing. On MSDOS, use only on file names without extension
- * or in pipe mode.
- */
-
-/* @(#) $Id: minigzip.c,v 1.1 2004/10/08 09:44:26 const_k Exp $ */
-
-#ifdef HAVE_CONFIG_H
-#include <config.h>
-#endif
-
-#include <stdio.h>
-#include "zlib.h"
-
-#ifdef STDC
-# include <string.h>
-# include <stdlib.h>
-#else
- extern void exit OF((int));
-#endif
-
-#ifdef HAVE_MMAP
-# include <sys/types.h>
-# include <sys/mman.h>
-# include <sys/stat.h>
-#endif
-
-#if defined(MSDOS) || defined(OS2) || defined(WIN32)
-# include <fcntl.h>
-# include <io.h>
-# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
-#else
-# define SET_BINARY_MODE(file)
-#endif
-
-#ifdef VMS
-# define unlink delete
-# define GZ_SUFFIX "-gz"
-#endif
-#ifdef RISCOS
-# define unlink remove
-# define GZ_SUFFIX "-gz"
-# define fileno(file) file->__file
-#endif
-#if defined(__MWERKS__) && __dest_os != __be_os && __dest_os != __win32_os
-# include <unix.h> /* for fileno */
-#endif
-
-#ifndef WIN32 /* unlink already in stdio.h for WIN32 */
- extern int unlink OF((const char *));
-#endif
-
-#ifndef GZ_SUFFIX
-# define GZ_SUFFIX ".gz"
-#endif
-#define SUFFIX_LEN (sizeof(GZ_SUFFIX)-1)
-
-#define BUFLEN 16384
-#define MAX_NAME_LEN 1024
-
-#ifdef MAXSEG_64K
-# define local static
- /* Needed for systems with limitation on stack size. */
-#else
-# define local
-#endif
-
-char *prog;
-
-void error OF((const char *msg));
-void gz_compress OF((FILE *in, gzFile out));
-#ifdef HAVE_MMAP
-int gz_compress_mmap OF((FILE *in, gzFile out));
-#endif
-void gz_uncompress OF((gzFile in, FILE *out));
-void file_compress OF((char *file, char *mode));
-void file_uncompress OF((char *file));
-int main OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Display error message and exit
- */
-void error(msg)
- const char *msg;
-{
- fprintf(stderr, "%s: %s\n", prog, msg);
- exit(1);
-}
-
-/* ===========================================================================
- * Compress input to output then close both files.
- */
-
-void gz_compress(in, out)
- FILE *in;
- gzFile out;
-{
- local char buf[BUFLEN];
- int len;
- int err;
-
-#ifdef HAVE_MMAP
- /* Try first compressing with mmap. If mmap fails (minigzip used in a
- * pipe), use the normal fread loop.
- */
- if (gz_compress_mmap(in, out) == Z_OK) return;
-#endif
- for (;;) {
- len = fread(buf, 1, sizeof(buf), in);
- if (ferror(in)) {
- perror("fread");
- exit(1);
- }
- if (len == 0) break;
-
- if (gzwrite(out, buf, (unsigned)len) != len) error(gzerror(out, &err));
- }
- fclose(in);
- if (gzclose(out) != Z_OK) error("failed gzclose");
-}
-
-#ifdef HAVE_MMAP /* MMAP version, Miguel Albrecht <malbrech@eso.org> */
-
-/* Try compressing the input file at once using mmap. Return Z_OK if
- * if success, Z_ERRNO otherwise.
- */
-int gz_compress_mmap(in, out)
- FILE *in;
- gzFile out;
-{
- int len;
- int err;
- int ifd = fileno(in);
- caddr_t buf; /* mmap'ed buffer for the entire input file */
- off_t buf_len; /* length of the input file */
- struct stat sb;
-
- /* Determine the size of the file, needed for mmap: */
- if (fstat(ifd, &sb) < 0) return Z_ERRNO;
- buf_len = sb.st_size;
- if (buf_len <= 0) return Z_ERRNO;
-
- /* Now do the actual mmap: */
- buf = mmap((caddr_t) 0, buf_len, PROT_READ, MAP_SHARED, ifd, (off_t)0);
- if (buf == (caddr_t)(-1)) return Z_ERRNO;
-
- /* Compress the whole file at once: */
- len = gzwrite(out, (char *)buf, (unsigned)buf_len);
-
- if (len != (int)buf_len) error(gzerror(out, &err));
-
- munmap(buf, buf_len);
- fclose(in);
- if (gzclose(out) != Z_OK) error("failed gzclose");
- return Z_OK;
-}
-#endif /* HAVE_MMAP */
-
-/* ===========================================================================
- * Uncompress input to output then close both files.
- */
-void gz_uncompress(in, out)
- gzFile in;
- FILE *out;
-{
- local char buf[BUFLEN];
- int len;
- int err;
-
- for (;;) {
- len = gzread(in, buf, sizeof(buf));
- if (len < 0) error (gzerror(in, &err));
- if (len == 0) break;
-
- if ((int)fwrite(buf, 1, (unsigned)len, out) != len) {
- error("failed fwrite");
- }
- }
- if (fclose(out)) error("failed fclose");
-
- if (gzclose(in) != Z_OK) error("failed gzclose");
-}
-
-
-/* ===========================================================================
- * Compress the given file: create a corresponding .gz file and remove the
- * original.
- */
-void file_compress(file, mode)
- char *file;
- char *mode;
-{
- local char outfile[MAX_NAME_LEN];
- FILE *in;
- gzFile out;
-
- strcpy(outfile, file);
- strcat(outfile, GZ_SUFFIX);
-
- in = fopen(file, "rb");
- if (in == NULL) {
- perror(file);
- exit(1);
- }
- out = gzopen(outfile, mode);
- if (out == NULL) {
- fprintf(stderr, "%s: can't gzopen %s\n", prog, outfile);
- exit(1);
- }
- gz_compress(in, out);
-
- unlink(file);
-}
-
-
-/* ===========================================================================
- * Uncompress the given file and remove the original.
- */
-void file_uncompress(file)
- char *file;
-{
- local char buf[MAX_NAME_LEN];
- char *infile, *outfile;
- FILE *out;
- gzFile in;
- int len = strlen(file);
-
- strcpy(buf, file);
-
- if (len > SUFFIX_LEN && strcmp(file+len-SUFFIX_LEN, GZ_SUFFIX) == 0) {
- infile = file;
- outfile = buf;
- outfile[len-3] = '\0';
- } else {
- outfile = file;
- infile = buf;
- strcat(infile, GZ_SUFFIX);
- }
- in = gzopen(infile, "rb");
- if (in == NULL) {
- fprintf(stderr, "%s: can't gzopen %s\n", prog, infile);
- exit(1);
- }
- out = fopen(outfile, "wb");
- if (out == NULL) {
- perror(file);
- exit(1);
- }
-
- gz_uncompress(in, out);
-
- unlink(infile);
-}
-
-
-/* ===========================================================================
- * Usage: minigzip [-d] [-f] [-h] [-1 to -9] [files...]
- * -d : decompress
- * -f : compress with Z_FILTERED
- * -h : compress with Z_HUFFMAN_ONLY
- * -1 to -9 : compression level
- */
-
-int main(argc, argv)
- int argc;
- char *argv[];
-{
- int uncompr = 0;
- gzFile file;
- char outmode[20];
-
- strcpy(outmode, "wb6 ");
-
- prog = argv[0];
- argc--, argv++;
-
- while (argc > 0) {
- if (strcmp(*argv, "-d") == 0)
- uncompr = 1;
- else if (strcmp(*argv, "-f") == 0)
- outmode[3] = 'f';
- else if (strcmp(*argv, "-h") == 0)
- outmode[3] = 'h';
- else if ((*argv)[0] == '-' && (*argv)[1] >= '1' && (*argv)[1] <= '9' &&
- (*argv)[2] == 0)
- outmode[2] = (*argv)[1];
- else
- break;
- argc--, argv++;
- }
- if (argc == 0) {
- SET_BINARY_MODE(stdin);
- SET_BINARY_MODE(stdout);
- if (uncompr) {
- file = gzdopen(fileno(stdin), "rb");
- if (file == NULL) error("can't gzdopen stdin");
- gz_uncompress(file, stdout);
- } else {
- file = gzdopen(fileno(stdout), outmode);
- if (file == NULL) error("can't gzdopen stdout");
- gz_compress(stdin, file);
- }
- } else {
- do {
- if (uncompr) {
- file_uncompress(*argv);
- } else {
- file_compress(*argv, outmode);
- }
- } while (argv++, --argc);
- }
- exit(0);
- return 0; /* to avoid warning */
-}
diff --git a/common/zlib/zlib.3 b/common/zlib/zlib.3
deleted file mode 100644
index 3a6e450..0000000
--- a/common/zlib/zlib.3
+++ /dev/null
@@ -1,107 +0,0 @@
-.TH ZLIB 3 "11 March 2002"
-.SH NAME
-zlib \- compression/decompression library
-.SH SYNOPSIS
-[see
-.I zlib.h
-for full description]
-.SH DESCRIPTION
-The
-.I zlib
-library is a general purpose data compression library.
-The code is thread safe.
-It provides in-memory compression and decompression functions,
-including integrity checks of the uncompressed data.
-This version of the library supports only one compression method (deflation)
-but other algorithms will be added later and will have the same stream interface.
-.LP
-Compression can be done in a single step if the buffers are large enough
-(for example if an input file is mmap'ed),
-or can be done by repeated calls of the compression function.
-In the latter case,
-the application must provide more input and/or consume the output
-(providing more output space) before each call.
-.LP
-The library also supports reading and writing files in
-.I gzip
-(.gz) format
-with an interface similar to that of stdio.
-.LP
-The library does not install any signal handler. The decoder checks
-the consistency of the compressed data, so the library should never
-crash even in case of corrupted input.
-.LP
-All functions of the compression library are documented in the file
-.IR zlib.h.
-The distribution source includes examples of use of the library
-the files
-.I example.c
-and
-.IR minigzip.c .
-.LP
-A Java implementation of
-.IR zlib
-is available in the Java Development Kit 1.1
-.IP
-http://www.javasoft.com/products/JDK/1.1/docs/api/Package-java.util.zip.html
-.LP
-A Perl interface to
-.IR zlib ,
-written by Paul Marquess (pmarquess@bfsec.bt.co.uk)
-is available at CPAN (Comprehensive Perl Archive Network) sites,
-such as:
-.IP
-ftp://ftp.cis.ufl.edu/pub/perl/CPAN/modules/by-module/Compress/Compress-Zlib*
-.LP
-A Python interface to
-.IR zlib
-written by A.M. Kuchling <amk@magnet.com>
-is available from the Python Software Association sites, such as:
-.IP
-ftp://ftp.python.org/pub/python/contrib/Encoding/zlib*.tar.gz
-.SH "SEE ALSO"
-Questions about zlib should be sent to:
-.IP
-zlib@quest.jpl.nasa.gov
-or, if this fails, to the author addresses given below.
-The zlib home page is:
-.IP
-http://www.cdrom.com/pub/infozip/zlib/
-.LP
-The data format used by the zlib library is described by RFC
-(Request for Comments) 1950 to 1952 in the files:
-.IP
-ftp://ds.internic.net/rfc/rfc1950.txt (zlib format)
-.br
-rfc1951.txt (deflate format)
-.br
-rfc1952.txt (gzip format)
-.LP
-These documents are also available in other formats from:
-.IP
-ftp://ftp.uu.net/graphics/png/documents/zlib/zdoc-index.html
-.SH AUTHORS
-Version 1.1.4
-Copyright (C) 1995-2002 Jean-loup Gailly (jloup@gzip.org)
-and Mark Adler (madler@alumni.caltech.edu).
-.LP
-This software is provided "as-is,"
-without any express or implied warranty.
-In no event will the authors be held liable for any damages
-arising from the use of this software.
-See the distribution directory with respect to requirements
-governing redistribution.
-The deflate format used by
-.I zlib
-was defined by Phil Katz.
-The deflate and
-.I zlib
-specifications were written by L. Peter Deutsch.
-Thanks to all the people who reported problems and suggested various
-improvements in
-.IR zlib ;
-who are too numerous to cite here.
-.LP
-UNIX manual page by R. P. C. Rodgers,
-U.S. National Library of Medicine (rodgers@nlm.nih.gov).
-.\" end of man page
diff --git a/common/zlib/zlib.dsp b/common/zlib/zlib.dsp
deleted file mode 100644
index ede5851..0000000
--- a/common/zlib/zlib.dsp
+++ /dev/null
@@ -1,217 +0,0 @@
-# Microsoft Developer Studio Project File - Name="zlib" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-CFG=zlib - Win32 Debug Unicode
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "zlib.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "zlib.mak" CFG="zlib - Win32 Debug Unicode"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "zlib - Win32 Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "zlib - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE "zlib - Win32 Debug Unicode" (based on "Win32 (x86) Static Library")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF "$(CFG)" == "zlib - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "..\Release"
-# PROP Intermediate_Dir "..\Release\zlib"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O1 /D "NDEBUG" /D "_LIB" /D "WIN32" /D "_MBCS" /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ELSEIF "$(CFG)" == "zlib - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "..\Debug"
-# PROP Intermediate_Dir "..\Debug\zlib"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "_LIB" /D "WIN32" /D "_MBCS" /YX /FD /GZ /c
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ELSEIF "$(CFG)" == "zlib - Win32 Debug Unicode"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "zlib___Win32_Debug_Unicode"
-# PROP BASE Intermediate_Dir "zlib___Win32_Debug_Unicode"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "..\Debug_Unicode"
-# PROP Intermediate_Dir "..\Debug_Unicode\zlib"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_DEBUG" /D "_LIB" /D "WIN32" /D "_MBCS" /YX /FD /GZ /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /Zi /Od /D "_LIB" /D "_DEBUG" /D "WIN32" /D "_UNICODE" /D "UNICODE" /YX /FD /GZ /c
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ENDIF
-
-# Begin Target
-
-# Name "zlib - Win32 Release"
-# Name "zlib - Win32 Debug"
-# Name "zlib - Win32 Debug Unicode"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=.\adler32.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\compress.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\crc32.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\deflate.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\gzio.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\inflate.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\trees.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\uncompr.c
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=.\deflate.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infblock.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infcodes.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffast.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inffixed.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\inftrees.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\infutil.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\trees.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zconf.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zlib.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\zutil.h
-# End Source File
-# End Group
-# End Target
-# End Project
diff --git a/common/zlib/zlib.html b/common/zlib/zlib.html
deleted file mode 100644
index c343703..0000000
--- a/common/zlib/zlib.html
+++ /dev/null
@@ -1,971 +0,0 @@
-<html>
-<head>
- <title>
- zlib general purpose compression library version 1.1.4
- </title>
-</head>
-<body bgcolor="White" text="Black" vlink="Red" alink="Navy" link="Red">
-<!-- background="zlibbg.gif" -->
-
-<h1> zlib 1.1.4 Manual </h1>
-<hr>
-<a name="Contents"><h2>Contents</h2>
-<ol type="I">
-<li> <a href="#Prologue">Prologue</a>
-<li> <a href="#Introduction">Introduction</a>
-<li> <a href="#Utility functions">Utility functions</a>
-<li> <a href="#Basic functions">Basic functions</a>
-<li> <a href="#Advanced functions">Advanced functions</a>
-<li> <a href="#Constants">Constants</a>
-<li> <a href="#struct z_stream_s">struct z_stream_s</a>
-<li> <a href="#Checksum functions">Checksum functions</a>
-<li> <a href="#Misc">Misc</a>
-</ol>
-<hr>
-<a name="Prologue"><h2> Prologue </h2>
- 'zlib' general purpose compression library version 1.1.4, March 11th, 2002
- <p>
- Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
- <p>
- This software is provided 'as-is', without any express or implied
- warranty. In no event will the authors be held liable for any damages
- arising from the use of this software.
- <p>
- Permission is granted to anyone to use this software for any purpose,
- including commercial applications, and to alter it and redistribute it
- freely, subject to the following restrictions:
- <ol>
- <li> The origin of this software must not be misrepresented ; you must not
- claim that you wrote the original software. If you use this software
- in a product, an acknowledgment in the product documentation would be
- appreciated but is not required.
- <li> Altered source versions must be plainly marked as such, and must not be
- misrepresented as being the original software.
- <li> This notice may not be removed or altered from any source distribution.
- </ol>
-
- <dl>
- <dt>Jean-loup Gailly
- <dd><a href="mailto:jloup@gzip.org">jloup@gzip.org</a>
- <dt>Mark Adler
- <dd><a href="mailto:madler@alumni.caltech.edu">madler@alumni.caltech.edu</a>
- </dl>
-
- The data format used by the zlib library is described by RFCs (Request for
- Comments) 1950 to 1952 in the files
- <a href="ftp://ds.internic.net/rfc/rfc1950.txt">
- ftp://ds.internic.net/rfc/rfc1950.txt </a>
- (zlib format),
- <a href="ftp://ds.internic.net/rfc/rfc1951.txt">
- rfc1951.txt </a>
- (<a href="#deflate">deflate</a> format) and
- <a href="ftp://ds.internic.net/rfc/rfc1952.txt">
- rfc1952.txt </a>
- (gzip format).
- <p>
- This manual is converted from zlib.h by
- <a href="mailto:piaip@csie.ntu.edu.tw"> piaip </a>
- <p>
- Visit <a href="http://ftp.cdrom.com/pub/infozip/zlib/">
- http://ftp.cdrom.com/pub/infozip/zlib/</a>
- for the official zlib web page.
- <p>
-
-<hr>
-<a name="Introduction"><h2> Introduction </h2>
- The 'zlib' compression library provides in-memory compression and
- decompression functions, including integrity checks of the uncompressed
- data. This version of the library supports only one compression method
- (deflation) but other algorithms will be added later and will have the same
- stream interface.
- <p>
-
- Compression can be done in a single step if the buffers are large
- enough (for example if an input file is mmap'ed), or can be done by
- repeated calls of the compression function. In the latter case, the
- application must provide more input and/or consume the output
- (providing more output space) before each call.
- <p>
-
- The library also supports reading and writing files in gzip (.gz) format
- with an interface similar to that of stdio.
- <p>
-
- The library does not install any signal handler. The decoder checks
- the consistency of the compressed data, so the library should never
- crash even in case of corrupted input.
- <p>
-
-<hr>
-<a name="Utility functions"><h2> Utility functions </h2>
- The following utility functions are implemented on top of the
- <a href="#Basic functions">basic stream-oriented functions</a>.
- To simplify the interface, some
- default options are assumed (compression level and memory usage,
- standard memory allocation functions). The source code of these
- utility functions can easily be modified if you need special options.
-<h3> Function list </h3>
-<ul>
-<li> int <a href="#compress">compress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
-<li> int <a href="#compress2">compress2</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level);
-<li> int <a href="#uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);
-<li> typedef voidp gzFile;
-<li> gzFile <a href="#gzopen">gzopen</a> (const char *path, const char *mode);
-<li> gzFile <a href="#gzdopen">gzdopen</a> (int fd, const char *mode);
-<li> int <a href="#gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);
-<li> int <a href="#gzread">gzread</a> (gzFile file, voidp buf, unsigned len);
-<li> int <a href="#gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);
-<li> int VA <a href="#gzprintf">gzprintf</a> (gzFile file, const char *format, ...);
-<li> int <a href="#gzputs">gzputs</a> (gzFile file, const char *s);
-<li> char * <a href="#gzgets">gzgets</a> (gzFile file, char *buf, int len);
-<li> int <a href="#gzputc">gzputc</a> (gzFile file, int c);
-<li> int <a href="#gzgetc">gzgetc</a> (gzFile file);
-<li> int <a href="#gzflush">gzflush</a> (gzFile file, int flush);
-<li> z_off_t <a href="#gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);
-<li> z_off_t <a href="#gztell">gztell</a> (gzFile file);
-<li> int <a href="#gzrewind">gzrewind</a> (gzFile file);
-<li> int <a href="#gzeof">gzeof</a> (gzFile file);
-<li> int <a href="#gzclose">gzclose</a> (gzFile file);
-<li> const char * <a href="#gzerror">gzerror</a> (gzFile file, int *errnum);
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> int <a name="compress">compress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
-<dd>
- Compresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be at least 0.1% larger than
- sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
- compressed buffer.<p>
- This function can be used to <a href="#compress">compress</a> a whole file at once if the
- input file is mmap'ed.<p>
- <a href="#compress">compress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
- buffer.<p>
-
-<font color="Blue"><dt> int <a name="compress2">compress2</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen, int level);</font>
-<dd>
- Compresses the source buffer into the destination buffer. The level
- parameter has the same meaning as in <a href="#deflateInit">deflateInit</a>. sourceLen is the byte
- length of the source buffer. Upon entry, destLen is the total size of the
- destination buffer, which must be at least 0.1% larger than sourceLen plus
- 12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
- <p>
-
- <a href="#compress2">compress2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
- memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output buffer,
- <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the level parameter is invalid.
- <p>
-
-<font color="Blue"><dt> int <a name="uncompress">uncompress</a> (Bytef *dest, uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
-<dd>
- Decompresses the source buffer into the destination buffer. sourceLen is
- the byte length of the source buffer. Upon entry, destLen is the total
- size of the destination buffer, which must be large enough to hold the
- entire uncompressed data. (The size of the uncompressed data must have
- been saved previously by the compressor and transmitted to the decompressor
- by some mechanism outside the scope of this compression library.)
- Upon exit, destLen is the actual size of the compressed buffer. <p>
- This function can be used to decompress a whole file at once if the
- input file is mmap'ed.
- <p>
-
- <a href="#uncompress">uncompress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
- buffer, or <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was corrupted.
- <p>
-
-<dt> typedef voidp gzFile;
-<dd> <p>
-
-<font color="Blue"><dt> gzFile <a name="gzopen">gzopen</a> (const char *path, const char *mode);</font>
-<dd>
- Opens a gzip (.gz) file for reading or writing. The mode parameter
- is as in fopen ("rb" or "wb") but can also include a compression level
- ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
- Huffman only compression as in "wb1h". (See the description
- of <a href="#deflateInit2">deflateInit2</a> for more information about the strategy parameter.)
- <p>
-
- <a href="#gzopen">gzopen</a> can be used to read a file which is not in gzip format ; in this
- case <a href="#gzread">gzread</a> will directly read from the file without decompression.
- <p>
-
- <a href="#gzopen">gzopen</a> returns NULL if the file could not be opened or if there was
- insufficient memory to allocate the (de)compression <a href="#state">state</a> ; errno
- can be checked to distinguish the two cases (if errno is zero, the
- zlib error is <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a>).
- <p>
-
-<font color="Blue"><dt> gzFile <a name="gzdopen">gzdopen</a> (int fd, const char *mode);</font>
-<dd>
- <a href="#gzdopen">gzdopen</a>() associates a gzFile with the file descriptor fd. File
- descriptors are obtained from calls like open, dup, creat, pipe or
- fileno (in the file has been previously opened with fopen).
- The mode parameter is as in <a href="#gzopen">gzopen</a>.
- <p>
- The next call of <a href="#gzclose">gzclose</a> on the returned gzFile will also close the
- file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
- descriptor fd. If you want to keep fd open, use <a href="#gzdopen">gzdopen</a>(dup(fd), mode).
- <p>
- <a href="#gzdopen">gzdopen</a> returns NULL if there was insufficient memory to allocate
- the (de)compression <a href="#state">state</a>.
- <p>
-
-<font color="Blue"><dt> int <a name="gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);</font>
-<dd>
- Dynamically update the compression level or strategy. See the description
- of <a href="#deflateInit2">deflateInit2</a> for the meaning of these parameters.
- <p>
- <a href="#gzsetparams">gzsetparams</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the file was not
- opened for writing.
- <p>
-
-<font color="Blue"><dt> int <a name="gzread">gzread</a> (gzFile file, voidp buf, unsigned len);</font>
-<dd>
- Reads the given number of uncompressed bytes from the compressed file.
- If the input file was not in gzip format, <a href="#gzread">gzread</a> copies the given number
- of bytes into the buffer.
- <p>
- <a href="#gzread">gzread</a> returns the number of uncompressed bytes actually read (0 for
- end of file, -1 for error).
- <p>
-
-<font color="Blue"><dt> int <a name="gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);</font>
-<dd>
- Writes the given number of uncompressed bytes into the compressed file.
- <a href="#gzwrite">gzwrite</a> returns the number of uncompressed bytes actually written
- (0 in case of error).
- <p>
-
-<font color="Blue"><dt> int VA <a name="gzprintf">gzprintf</a> (gzFile file, const char *format, ...);</font>
-<dd>
- Converts, formats, and writes the args to the compressed file under
- control of the format string, as in fprintf. <a href="#gzprintf">gzprintf</a> returns the number of
- uncompressed bytes actually written (0 in case of error).
- <p>
-
-<font color="Blue"><dt> int <a name="gzputs">gzputs</a> (gzFile file, const char *s);</font>
-<dd>
- Writes the given null-terminated string to the compressed file, excluding
- the terminating null character.
- <p>
- <a href="#gzputs">gzputs</a> returns the number of characters written, or -1 in case of error.
- <p>
-
-<font color="Blue"><dt> char * <a name="gzgets">gzgets</a> (gzFile file, char *buf, int len);</font>
-<dd>
- Reads bytes from the compressed file until len-1 characters are read, or
- a newline character is read and transferred to buf, or an end-of-file
- condition is encountered. The string is then terminated with a null
- character.
- <p>
- <a href="#gzgets">gzgets</a> returns buf, or <a href="#Z_NULL">Z_NULL</a> in case of error.
- <p>
-
-<font color="Blue"><dt> int <a name="gzputc">gzputc</a> (gzFile file, int c);</font>
-<dd>
- Writes c, converted to an unsigned char, into the compressed file.
- <a href="#gzputc">gzputc</a> returns the value that was written, or -1 in case of error.
- <p>
-
-<font color="Blue"><dt> int <a name="gzgetc">gzgetc</a> (gzFile file);</font>
-<dd>
- Reads one byte from the compressed file. <a href="#gzgetc">gzgetc</a> returns this byte
- or -1 in case of end of file or error.
- <p>
-
-<font color="Blue"><dt> int <a name="gzflush">gzflush</a> (gzFile file, int flush);</font>
-<dd>
- Flushes all pending output into the compressed file. The parameter
- flush is as in the <a href="#deflate">deflate</a>() function. The return value is the zlib
- error number (see function <a href="#gzerror">gzerror</a> below). <a href="#gzflush">gzflush</a> returns <a href="#Z_OK">Z_OK</a> if
- the flush parameter is <a href="#Z_FINISH">Z_FINISH</a> and all output could be flushed.
- <p>
- <a href="#gzflush">gzflush</a> should be called only when strictly necessary because it can
- degrade compression.
- <p>
-
-<font color="Blue"><dt> z_off_t <a name="gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);</font>
-<dd>
- Sets the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
- given compressed file. The offset represents a number of bytes in the
- uncompressed data stream. The whence parameter is defined as in lseek(2);
- the value SEEK_END is not supported.
- <p>
- If the file is opened for reading, this function is emulated but can be
- extremely slow. If the file is opened for writing, only forward seeks are
- supported ; <a href="#gzseek">gzseek</a> then compresses a sequence of zeroes up to the new
- starting position.
- <p>
- <a href="#gzseek">gzseek</a> returns the resulting offset location as measured in bytes from
- the beginning of the uncompressed stream, or -1 in case of error, in
- particular if the file is opened for writing and the new starting position
- would be before the current position.
- <p>
-
-<font color="Blue"><dt> int <a name="gzrewind">gzrewind</a> (gzFile file);</font>
-<dd>
- Rewinds the given file. This function is supported only for reading.
- <p>
- <a href="#gzrewind">gzrewind</a>(file) is equivalent to (int)<a href="#gzseek">gzseek</a>(file, 0L, SEEK_SET)
- <p>
-
-<font color="Blue"><dt> z_off_t <a name="gztell">gztell</a> (gzFile file);</font>
-<dd>
- Returns the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
- given compressed file. This position represents a number of bytes in the
- uncompressed data stream.
- <p>
-
- <a href="#gztell">gztell</a>(file) is equivalent to <a href="#gzseek">gzseek</a>(file, 0L, SEEK_CUR)
- <p>
-
-<font color="Blue"><dt> int <a name="gzeof">gzeof</a> (gzFile file);</font>
-<dd>
- Returns 1 when EOF has previously been detected reading the given
- input stream, otherwise zero.
- <p>
-
-<font color="Blue"><dt> int <a name="gzclose">gzclose</a> (gzFile file);</font>
-<dd>
- Flushes all pending output if necessary, closes the compressed file
- and deallocates all the (de)compression <a href="#state">state</a>. The return value is the zlib
- error number (see function <a href="#gzerror">gzerror</a> below).
- <p>
-
-<font color="Blue"><dt> const char * <a name="gzerror">gzerror</a> (gzFile file, int *errnum);</font>
-<dd>
- Returns the error message for the last error which occurred on the
- given compressed file. errnum is set to zlib error number. If an
- error occurred in the file system and not in the compression library,
- errnum is set to <a href="#Z_ERRNO">Z_ERRNO</a> and the application may consult errno
- to get the exact error code.
- <p>
-</dl>
-<hr>
-<a name="Basic functions"><h2> Basic functions </h2>
-<h3> Function list </h3>
-<ul>
-<li> const char * <a href="#zlibVersion">zlibVersion</a> (void);
-<li> int <a href="#deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);
-<li> int <a href="#deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
-<li> int <a href="#deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
-<li> int <a href="#inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);
-<li> int <a href="#inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
-<li> int <a href="#inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
-</ul>
-
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> const char * <a name="zlibVersion">zlibVersion</a> (void);</font>
-<dd> The application can compare <a href="#zlibVersion">zlibVersion</a> and ZLIB_VERSION for consistency.
- If the first character differs, the library code actually used is
- not compatible with the zlib.h header file used by the application.
- This check is automatically made by <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a>.
- <p>
-
-<font color="Blue"><dt> int <a name="deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);</font>
-<dd>
- Initializes the internal stream <a href="#state">state</a> for compression. The fields
- <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by the caller.
- If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#deflateInit">deflateInit</a> updates them to
- use default allocation functions.
- <p>
-
- The compression level must be <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>, or between 0 and 9:
- 1 gives best speed, 9 gives best compression, 0 gives no compression at
- all (the input data is simply copied a block at a time).
- <p>
-
- <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> requests a default compromise between speed and
- compression (currently equivalent to level 6).
- <p>
-
- <a href="#deflateInit">deflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if level is not a valid compression level,
- <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version (<a href="#zlib_version">zlib_version</a>) is incompatible
- with the version assumed by the caller (ZLIB_VERSION).
- <a href="#msg">msg</a> is set to null if there is no error message. <a href="#deflateInit">deflateInit</a> does not
- perform any compression: this will be done by <a href="#deflate">deflate</a>().
- <p>
-
-<font color="Blue"><dt> int <a name="deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
-<dd>
- <a href="#deflate">deflate</a> compresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may introduce some
- output latency (reading input without producing any output) except when
- forced to flush.<p>
-
- The detailed semantics are as follows. <a href="#deflate">deflate</a> performs one or both of the
- following actions:
-
- <ul>
- <li> Compress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> are updated and
- processing will resume at this point for the next call of <a href="#deflate">deflate</a>().
-
- <li>
- Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a>
- accordingly. This action is forced if the parameter flush is non zero.
- Forcing flush frequently degrades the compression ratio, so this parameter
- should be set only when necessary (in interactive applications).
- Some output may be provided even if flush is not set.
- </ul> <p>
-
- Before the call of <a href="#deflate">deflate</a>(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> accordingly ; <a href="#avail_out">avail_out</a>
- should never be zero before the call. The application can consume the
- compressed output when it wants, for example when the output buffer is full
- (<a href="#avail_out">avail_out</a> == 0), or after each call of <a href="#deflate">deflate</a>(). If <a href="#deflate">deflate</a> returns <a href="#Z_OK">Z_OK</a>
- and with zero <a href="#avail_out">avail_out</a>, it must be called again after making room in the
- output buffer because there might be more output pending.
- <p>
-
- If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, all pending output is
- flushed to the output buffer and the output is aligned on a byte boundary, so
- that the decompressor can get all input data available so far. (In particular
- <a href="#avail_in">avail_in</a> is zero after the call if enough output space has been provided
- before the call.) Flushing may degrade compression for some compression
- algorithms and so it should be used only when necessary.
- <p>
-
- If flush is set to <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>, all output is flushed as with
- <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, and the compression <a href="#state">state</a> is reset so that decompression can
- restart from this point if previous compressed data has been damaged or if
- random access is desired. Using <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a> too often can seriously degrade
- the compression.
- <p>
-
- If <a href="#deflate">deflate</a> returns with <a href="#avail_out">avail_out</a> == 0, this function must be called again
- with the same value of the flush parameter and more output space (updated
- <a href="#avail_out">avail_out</a>), until the flush is complete (<a href="#deflate">deflate</a> returns with non-zero
- <a href="#avail_out">avail_out</a>).
- <p>
-
- If the parameter flush is set to <a href="#Z_FINISH">Z_FINISH</a>, pending input is processed,
- pending output is flushed and <a href="#deflate">deflate</a> returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> if there
- was enough output space ; if <a href="#deflate">deflate</a> returns with <a href="#Z_OK">Z_OK</a>, this function must be
- called again with <a href="#Z_FINISH">Z_FINISH</a> and more output space (updated <a href="#avail_out">avail_out</a>) but no
- more input data, until it returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> or an error. After
- <a href="#deflate">deflate</a> has returned <a href="#Z_STREAM_END">Z_STREAM_END</a>, the only possible operations on the
- stream are <a href="#deflateReset">deflateReset</a> or <a href="#deflateEnd">deflateEnd</a>.
- <p>
-
- <a href="#Z_FINISH">Z_FINISH</a> can be used immediately after <a href="#deflateInit">deflateInit</a> if all the compression
- is to be done in a single step. In this case, <a href="#avail_out">avail_out</a> must be at least
- 0.1% larger than <a href="#avail_in">avail_in</a> plus 12 bytes. If <a href="#deflate">deflate</a> does not return
- <a href="#Z_STREAM_END">Z_STREAM_END</a>, then it must be called again as described above.
- <p>
-
- <a href="#deflate">deflate</a>() sets strm-> <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all input read
- so far (that is, <a href="#total_in">total_in</a> bytes).
- <p>
-
- <a href="#deflate">deflate</a>() may update <a href="#data_type">data_type</a> if it can make a good guess about
- the input data type (<a href="#Z_ASCII">Z_ASCII</a> or <a href="#Z_BINARY">Z_BINARY</a>). In doubt, the data is considered
- binary. This field is only for information purposes and does not affect
- the compression algorithm in any manner.
- <p>
-
- <a href="#deflate">deflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input
- processed or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if all input has been
- consumed and all output has been produced (only when flush is set to
- <a href="#Z_FINISH">Z_FINISH</a>), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a> was inconsistent (for example
- if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible
- (for example <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> was zero).
- <p>
-
-<font color="Blue"><dt> int <a name="deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
- <p>
-
- <a href="#deflateEnd">deflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the
- stream <a href="#state">state</a> was inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the stream was freed
- prematurely (some input or output was discarded). In the error case,
- <a href="#msg">msg</a> may be set but then points to a static string (which must not be
- deallocated).
- <p>
-
-<font color="Blue"><dt> int <a name="inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
- Initializes the internal stream <a href="#state">state</a> for decompression. The fields
- <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
- the caller. If <a href="#next_in">next_in</a> is not <a href="#Z_NULL">Z_NULL</a> and <a href="#avail_in">avail_in</a> is large enough (the exact
- value depends on the compression method), <a href="#inflateInit">inflateInit</a> determines the
- compression method from the zlib header and allocates all data structures
- accordingly ; otherwise the allocation will be deferred to the first call of
- <a href="#inflate">inflate</a>. If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#inflateInit">inflateInit</a> updates them to
- use default allocation functions.
- <p>
-
- <a href="#inflateInit">inflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
- memory, <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version is incompatible with the
- version assumed by the caller. <a href="#msg">msg</a> is set to null if there is no error
- message. <a href="#inflateInit">inflateInit</a> does not perform any decompression apart from reading
- the zlib header if present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and
- <a href="#avail_in">avail_in</a> may be modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)
- <p>
-
-<font color="Blue"><dt> int <a name="inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
-<dd>
- <a href="#inflate">inflate</a> decompresses as much data as possible, and stops when the input
- buffer becomes empty or the output buffer becomes full. It may some
- introduce some output latency (reading input without producing any output)
- except when forced to flush.
- <p>
-
- The detailed semantics are as follows. <a href="#inflate">inflate</a> performs one or both of the
- following actions:
-
- <ul>
- <li> Decompress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
- accordingly. If not all input can be processed (because there is not
- enough room in the output buffer), <a href="#next_in">next_in</a> is updated and processing
- will resume at this point for the next call of <a href="#inflate">inflate</a>().
-
- <li> Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and
- <a href="#avail_out">avail_out</a> accordingly. <a href="#inflate">inflate</a>() provides as much output as possible,
- until there is no more input data or no more space in the output buffer
- (see below about the flush parameter).
- </ul> <p>
-
- Before the call of <a href="#inflate">inflate</a>(), the application should ensure that at least
- one of the actions is possible, by providing more input and/or consuming
- more output, and updating the next_* and avail_* values accordingly.
- The application can consume the uncompressed output when it wants, for
- example when the output buffer is full (<a href="#avail_out">avail_out</a> == 0), or after each
- call of <a href="#inflate">inflate</a>(). If <a href="#inflate">inflate</a> returns <a href="#Z_OK">Z_OK</a> and with zero <a href="#avail_out">avail_out</a>, it
- must be called again after making room in the output buffer because there
- might be more output pending.
- <p>
-
- If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, <a href="#inflate">inflate</a> flushes as much
- output as possible to the output buffer. The flushing behavior of <a href="#inflate">inflate</a> is
- not specified for values of the flush parameter other than <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
- and <a href="#Z_FINISH">Z_FINISH</a>, but the current implementation actually flushes as much output
- as possible anyway.
- <p>
-
- <a href="#inflate">inflate</a>() should normally be called until it returns <a href="#Z_STREAM_END">Z_STREAM_END</a> or an
- error. However if all decompression is to be performed in a single step
- (a single call of <a href="#inflate">inflate</a>), the parameter flush should be set to
- <a href="#Z_FINISH">Z_FINISH</a>. In this case all pending input is processed and all pending
- output is flushed ; <a href="#avail_out">avail_out</a> must be large enough to hold all the
- uncompressed data. (The size of the uncompressed data may have been saved
- by the compressor for this purpose.) The next operation on this stream must
- be <a href="#inflateEnd">inflateEnd</a> to deallocate the decompression <a href="#state">state</a>. The use of <a href="#Z_FINISH">Z_FINISH</a>
- is never required, but can be used to inform <a href="#inflate">inflate</a> that a faster routine
- may be used for the single <a href="#inflate">inflate</a>() call.
- <p>
-
- If a preset dictionary is needed at this point (see <a href="#inflateSetDictionary">inflateSetDictionary</a>
- below), <a href="#inflate">inflate</a> sets strm-<a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of the
- dictionary chosen by the compressor and returns <a href="#Z_NEED_DICT">Z_NEED_DICT</a> ; otherwise
- it sets strm-> <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all output produced
- so far (that is, <a href="#total_out">total_out</a> bytes) and returns <a href="#Z_OK">Z_OK</a>, <a href="#Z_STREAM_END">Z_STREAM_END</a> or
- an error code as described below. At the end of the stream, <a href="#inflate">inflate</a>()
- checks that its computed <a href="#adler32">adler32</a> checksum is equal to that saved by the
- compressor and returns <a href="#Z_STREAM_END">Z_STREAM_END</a> only if the checksum is correct.
- <p>
-
- <a href="#inflate">inflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input processed
- or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if the end of the compressed data has
- been reached and all uncompressed output has been produced, <a href="#Z_NEED_DICT">Z_NEED_DICT</a> if a
- preset dictionary is needed at this point, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was
- corrupted (input stream not conforming to the zlib format or incorrect
- <a href="#adler32">adler32</a> checksum), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent
- (for example if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible or if there was not
- enough room in the output buffer when <a href="#Z_FINISH">Z_FINISH</a> is used. In the <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a>
- case, the application may then call <a href="#inflateSync">inflateSync</a> to look for a good
- compression block.
- <p>
-
-<font color="Blue"><dt> int <a name="inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
- All dynamically allocated data structures for this stream are freed.
- This function discards any unprocessed input and does not flush any
- pending output.
- <p>
-
- <a href="#inflateEnd">inflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a>
- was inconsistent. In the error case, <a href="#msg">msg</a> may be set but then points to a
- static string (which must not be deallocated).
-</dl>
-<hr>
-<a name="Advanced functions"><h2> Advanced functions </h2>
- The following functions are needed only in some special applications.
-<h3> Function list </h3>
-<ul>
-<li> int <a href="#deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm,
-<li> int <a href="#deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);
-<li> int <a href="#deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);
-<li> int <a href="#deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
-<li> int <a href="#deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);
-<li> int <a href="#inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int windowBits);
-<li> int <a href="#inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);
-<li> int <a href="#inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);
-<li> int <a href="#inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
-
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> int <a name="deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int method, int windowBits, int memLevel, int strategy);</font>
-
-<dd> This is another version of <a href="#deflateInit">deflateInit</a> with more compression options. The
- fields <a href="#next_in">next_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
- the caller.<p>
-
- The method parameter is the compression method. It must be <a href="#Z_DEFLATED">Z_DEFLATED</a> in
- this version of the library.<p>
-
- The windowBits parameter is the base two logarithm of the window size
- (the size of the history buffer). It should be in the range 8..15 for this
- version of the library. Larger values of this parameter result in better
- compression at the expense of memory usage. The default value is 15 if
- <a href="#deflateInit">deflateInit</a> is used instead.<p>
-
- The memLevel parameter specifies how much memory should be allocated
- for the internal compression <a href="#state">state</a>. memLevel=1 uses minimum memory but
- is slow and reduces compression ratio ; memLevel=9 uses maximum memory
- for optimal speed. The default value is 8. See zconf.h for total memory
- usage as a function of windowBits and memLevel.<p>
-
- The strategy parameter is used to tune the compression algorithm. Use the
- value <a href="#Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> for normal data, <a href="#Z_FILTERED">Z_FILTERED</a> for data produced by a
- filter (or predictor), or <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> to force Huffman encoding only (no
- string match). Filtered data consists mostly of small values with a
- somewhat random distribution. In this case, the compression algorithm is
- tuned to <a href="#compress">compress</a> them better. The effect of <a href="#Z_FILTERED">Z_FILTERED</a> is to force more
- Huffman coding and less string matching ; it is somewhat intermediate
- between Z_DEFAULT and <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>. The strategy parameter only affects
- the compression ratio but not the correctness of the compressed output even
- if it is not set appropriately.<p>
-
- <a href="#deflateInit2">deflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
- memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as an invalid
- method). <a href="#msg">msg</a> is set to null if there is no error message. <a href="#deflateInit2">deflateInit2</a> does
- not perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
-
-<font color="Blue"><dt> int <a name="deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);</font>
-<dd>
- Initializes the compression dictionary from the given byte sequence
- without producing any compressed output. This function must be called
- immediately after <a href="#deflateInit">deflateInit</a>, <a href="#deflateInit2">deflateInit2</a> or <a href="#deflateReset">deflateReset</a>, before any
- call of <a href="#deflate">deflate</a>. The compressor and decompressor must use exactly the same
- dictionary (see <a href="#inflateSetDictionary">inflateSetDictionary</a>).<p>
-
- The dictionary should consist of strings (byte sequences) that are likely
- to be encountered later in the data to be compressed, with the most commonly
- used strings preferably put towards the end of the dictionary. Using a
- dictionary is most useful when the data to be compressed is short and can be
- predicted with good accuracy ; the data can then be compressed better than
- with the default empty dictionary.<p>
-
- Depending on the size of the compression data structures selected by
- <a href="#deflateInit">deflateInit</a> or <a href="#deflateInit2">deflateInit2</a>, a part of the dictionary may in effect be
- discarded, for example if the dictionary is larger than the window size in
- <a href="#deflate">deflate</a> or deflate2. Thus the strings most likely to be useful should be
- put at the end of the dictionary, not at the front.<p>
-
- Upon return of this function, strm-> <a href="#adler">adler</a> is set to the Adler32 value
- of the dictionary ; the decompressor may later use this value to determine
- which dictionary has been used by the compressor. (The Adler32 value
- applies to the whole dictionary even if only a subset of the dictionary is
- actually used by the compressor.)<p>
-
- <a href="#deflateSetDictionary">deflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
- parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
- inconsistent (for example if <a href="#deflate">deflate</a> has already been called for this stream
- or if the compression method is bsort). <a href="#deflateSetDictionary">deflateSetDictionary</a> does not
- perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
-
-<font color="Blue"><dt> int <a name="deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);</font>
-<dd>
- Sets the destination stream as a complete copy of the source stream.<p>
-
- This function can be useful when several compression strategies will be
- tried, for example when there are several ways of pre-processing the input
- data with a filter. The streams that will be discarded should then be freed
- by calling <a href="#deflateEnd">deflateEnd</a>. Note that <a href="#deflateCopy">deflateCopy</a> duplicates the internal
- compression <a href="#state">state</a> which can be quite large, so this strategy is slow and
- can consume lots of memory.<p>
-
- <a href="#deflateCopy">deflateCopy</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
- enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source stream <a href="#state">state</a> was inconsistent
- (such as <a href="#zalloc">zalloc</a> being NULL). <a href="#msg">msg</a> is left unchanged in both source and
- destination.<p>
-
-<font color="Blue"><dt> int <a name="deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd> This function is equivalent to <a href="#deflateEnd">deflateEnd</a> followed by <a href="#deflateInit">deflateInit</a>,
- but does not free and reallocate all the internal compression <a href="#state">state</a>.
- The stream will keep the same compression level and any other attributes
- that may have been set by <a href="#deflateInit2">deflateInit2</a>.<p>
-
- <a href="#deflateReset">deflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
- stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).<p>
-
-<font color="Blue"><dt> int <a name="deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);</font>
-<dd>
- Dynamically update the compression level and compression strategy. The
- interpretation of level and strategy is as in <a href="#deflateInit2">deflateInit2</a>. This can be
- used to switch between compression and straight copy of the input data, or
- to switch to a different kind of input data requiring a different
- strategy. If the compression level is changed, the input available so far
- is compressed with the old level (and may be flushed); the new level will
- take effect only at the next call of <a href="#deflate">deflate</a>().<p>
-
- Before the call of <a href="#deflateParams">deflateParams</a>, the stream <a href="#state">state</a> must be set as for
- a call of <a href="#deflate">deflate</a>(), since the currently available input may have to
- be compressed and flushed. In particular, strm-> <a href="#avail_out">avail_out</a> must be
- non-zero.<p>
-
- <a href="#deflateParams">deflateParams</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
- stream <a href="#state">state</a> was inconsistent or if a parameter was invalid, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
- if strm->avail_out was zero.<p>
-
-<font color="Blue"><dt> int <a name="inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int windowBits);</font>
-
-<dd> This is another version of <a href="#inflateInit">inflateInit</a> with an extra parameter. The
- fields <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized
- before by the caller.<p>
-
- The windowBits parameter is the base two logarithm of the maximum window
- size (the size of the history buffer). It should be in the range 8..15 for
- this version of the library. The default value is 15 if <a href="#inflateInit">inflateInit</a> is used
- instead. If a compressed stream with a larger window size is given as
- input, <a href="#inflate">inflate</a>() will return with the error code <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> instead of
- trying to allocate a larger window.<p>
-
- <a href="#inflateInit2">inflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
- memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as a negative
- memLevel). <a href="#msg">msg</a> is set to null if there is no error message. <a href="#inflateInit2">inflateInit2</a>
- does not perform any decompression apart from reading the zlib header if
- present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> may be
- modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)<p>
-
-<font color="Blue"><dt> int <a name="inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt dictLength);</font>
-<dd>
- Initializes the decompression dictionary from the given uncompressed byte
- sequence. This function must be called immediately after a call of <a href="#inflate">inflate</a>
- if this call returned <a href="#Z_NEED_DICT">Z_NEED_DICT</a>. The dictionary chosen by the compressor
- can be determined from the Adler32 value returned by this call of
- <a href="#inflate">inflate</a>. The compressor and decompressor must use exactly the same
- dictionary (see <a href="#deflateSetDictionary">deflateSetDictionary</a>).<p>
-
- <a href="#inflateSetDictionary">inflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
- parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
- inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the given dictionary doesn't match the
- expected one (incorrect Adler32 value). <a href="#inflateSetDictionary">inflateSetDictionary</a> does not
- perform any decompression: this will be done by subsequent calls of
- <a href="#inflate">inflate</a>().<p>
-
-<font color="Blue"><dt> int <a name="inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-
-<dd> Skips invalid compressed data until a full flush point (see above the
- description of <a href="#deflate">deflate</a> with <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>) can be found, or until all
- available input is skipped. No output is provided.<p>
-
- <a href="#inflateSync">inflateSync</a> returns <a href="#Z_OK">Z_OK</a> if a full flush point has been found, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
- if no more input was provided, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if no flush point has been found,
- or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent. In the success
- case, the application may save the current current value of <a href="#total_in">total_in</a> which
- indicates where valid compressed data was found. In the error case, the
- application may repeatedly call <a href="#inflateSync">inflateSync</a>, providing more input each time,
- until success or end of the input data.<p>
-
-<font color="Blue"><dt> int <a name="inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
- This function is equivalent to <a href="#inflateEnd">inflateEnd</a> followed by <a href="#inflateInit">inflateInit</a>,
- but does not free and reallocate all the internal decompression <a href="#state">state</a>.
- The stream will keep attributes that may have been set by <a href="#inflateInit2">inflateInit2</a>.
- <p>
-
- <a href="#inflateReset">inflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
- stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).
- <p>
-</dl>
-
-<hr>
-<a name="Checksum functions"><h2> Checksum functions </h2>
- These functions are not related to compression but are exported
- anyway because they might be useful in applications using the
- compression library.
-<h3> Function list </h3>
-<ul>
-<li> uLong <a href="#adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);
-<li> uLong <a href="#crc32">crc32</a> (uLong crc, const Bytef *buf, uInt len);
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> uLong <a name="adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);</font>
-<dd>
- Update a running Adler-32 checksum with the bytes buf[0..len-1] and
- return the updated checksum. If buf is NULL, this function returns
- the required initial value for the checksum.
- <p>
- An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
- much faster. Usage example:
- <pre>
-
- uLong <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(<a href="#adler">adler</a>, buffer, length);
- }
- if (<a href="#adler">adler</a> != original_adler) error();
- </pre>
-
-<font color="Blue"><dt> uLong <a name="crc32">crc32</a> (uLong crc, const Bytef *buf, uInt len);</font>
-<dd>
- Update a running crc with the bytes buf[0..len-1] and return the updated
- crc. If buf is NULL, this function returns the required initial value
- for the crc. Pre- and post-conditioning (one's complement) is performed
- within this function so it shouldn't be done by the application.
- Usage example:
- <pre>
-
- uLong crc = <a href="#crc32">crc32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
-
- while (read_buffer(buffer, length) != EOF) {
- crc = <a href="#crc32">crc32</a>(crc, buffer, length);
- }
- if (crc != original_crc) error();
- </pre>
-</dl>
-<hr>
-<a name="struct z_stream_s"><h2> struct z_stream_s </h2>
-<font color="Blue">
-<a name="z_stream_s">
-<pre>
-typedef struct z_stream_s {
- Bytef *<a name="next_in">next_in</a>; /* next input byte */
- uInt <a name="avail_in">avail_in</a>; /* number of bytes available at <a href="#next_in">next_in</a> */
- uLong <a name="total_in">total_in</a>; /* total nb of input bytes read so far */
-
- Bytef *<a name="next_out">next_out</a>; /* next output byte should be put there */
- uInt <a name="avail_out">avail_out</a>; /* remaining free space at <a href="#next_out">next_out</a> */
- uLong <a name="total_out">total_out</a>; /* total nb of bytes output so far */
-
- char *<a name="msg">msg</a>; /* last error message, NULL if no error */
- struct internal_state FAR *<a name="state">state</a>; /* not visible by applications */
-
- alloc_func <a name="zalloc">zalloc</a>; /* used to allocate the internal <a href="#state">state</a> */
- free_func <a name="zfree">zfree</a>; /* used to free the internal <a href="#state">state</a> */
- voidpf <a name="opaque">opaque</a>; /* private data object passed to <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> */
-
- int <a name="data_type">data_type</a>; /* best guess about the data type: ascii or binary */
- uLong <a name="adler">adler</a>; /* <a href="#adler32">adler32</a> value of the uncompressed data */
- uLong <a name="reserved">reserved</a>; /* <a href="#reserved">reserved</a> for future use */
-} <a href="#z_stream_s">z_stream</a> ;
-
-typedef <a href="#z_stream_s">z_stream</a> FAR * <a name="z_streamp">z_streamp</a>; ÿ
-</pre>
-</font>
- The application must update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> when <a href="#avail_in">avail_in</a> has
- dropped to zero. It must update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> when <a href="#avail_out">avail_out</a>
- has dropped to zero. The application must initialize <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and
- <a href="#opaque">opaque</a> before calling the init function. All other fields are set by the
- compression library and must not be updated by the application. <p>
-
- The <a href="#opaque">opaque</a> value provided by the application will be passed as the first
- parameter for calls of <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a>. This can be useful for custom
- memory management. The compression library attaches no meaning to the
- <a href="#opaque">opaque</a> value. <p>
-
- <a href="#zalloc">zalloc</a> must return <a href="#Z_NULL">Z_NULL</a> if there is not enough memory for the object.
- If zlib is used in a multi-threaded application, <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be
- thread safe. <p>
-
- On 16-bit systems, the functions <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be able to allocate
- exactly 65536 bytes, but will not be required to allocate more than this
- if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
- pointers returned by <a href="#zalloc">zalloc</a> for objects of exactly 65536 bytes *must*
- have their offset normalized to zero. The default allocation function
- provided by this library ensures this (see zutil.c). To reduce memory
- requirements and avoid any allocation of 64K objects, at the expense of
- compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
- <p>
-
- The fields <a href="#total_in">total_in</a> and <a href="#total_out">total_out</a> can be used for statistics or
- progress reports. After compression, <a href="#total_in">total_in</a> holds the total size of
- the uncompressed data and may be saved for use in the decompressor
- (particularly if the decompressor wants to decompress everything in
- a single step). <p>
-
-<hr>
-<a name="Constants"><h2> Constants </h2>
-<font color="Blue">
-<pre>
-#define <a name="Z_NO_FLUSH">Z_NO_FLUSH</a> 0
-#define <a name="Z_PARTIAL_FLUSH">Z_PARTIAL_FLUSH</a> 1
- /* will be removed, use <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> instead */
-#define <a name="Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> 2
-#define <a name="Z_FULL_FLUSH">Z_FULL_FLUSH</a> 3
-#define <a name="Z_FINISH">Z_FINISH</a> 4
-/* Allowed flush values ; see <a href="#deflate">deflate</a>() below for details */
-
-#define <a name="Z_OK">Z_OK</a> 0
-#define <a name="Z_STREAM_END">Z_STREAM_END</a> 1
-#define <a name="Z_NEED_DICT">Z_NEED_DICT</a> 2
-#define <a name="Z_ERRNO">Z_ERRNO</a> (-1)
-#define <a name="Z_STREAM_ERROR">Z_STREAM_ERROR</a> (-2)
-#define <a name="Z_DATA_ERROR">Z_DATA_ERROR</a> (-3)
-#define <a name="Z_MEM_ERROR">Z_MEM_ERROR</a> (-4)
-#define <a name="Z_BUF_ERROR">Z_BUF_ERROR</a> (-5)
-#define <a name="Z_VERSION_ERROR">Z_VERSION_ERROR</a> (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define <a name="Z_NO_COMPRESSION">Z_NO_COMPRESSION</a> 0
-#define <a name="Z_BEST_SPEED">Z_BEST_SPEED</a> 1
-#define <a name="Z_BEST_COMPRESSION">Z_BEST_COMPRESSION</a> 9
-#define <a name="Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> (-1)
-/* compression levels */
-
-#define <a name="Z_FILTERED">Z_FILTERED</a> 1
-#define <a name="Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> 2
-#define <a name="Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> 0
-/* compression strategy ; see <a href="#deflateInit2">deflateInit2</a>() below for details */
-
-#define <a name="Z_BINARY">Z_BINARY</a> 0
-#define <a name="Z_ASCII">Z_ASCII</a> 1
-#define <a name="Z_UNKNOWN">Z_UNKNOWN</a> 2
-/* Possible values of the <a href="#data_type">data_type</a> field */
-
-#define <a name="Z_DEFLATED">Z_DEFLATED</a> 8
-/* The <a href="#deflate">deflate</a> compression method (the only one supported in this version) */
-
-#define <a name="Z_NULL">Z_NULL</a> 0 /* for initializing <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a>, <a href="#opaque">opaque</a> */
-
-#define <a name="zlib_version">zlib_version</a> <a href="#zlibVersion">zlibVersion</a>()
-/* for compatibility with versions less than 1.0.2 */
-</pre>
-</font>
-
-<hr>
-<a name="Misc"><h2> Misc </h2>
- <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a> are macros to allow checking the zlib version
- and the compiler's view of <a href="#z_stream_s">z_stream</a>.
- <p>
- Other functions:
- <dl>
- <font color="Blue"><dt> const char * <a name="zError">zError</a> (int err);</font>
- <font color="Blue"><dt> int <a name="inflateSyncPoint">inflateSyncPoint</a> (<a href="#z_streamp">z_streamp</a> z);</font>
- <font color="Blue"><dt> const uLongf * <a name="get_crc_table">get_crc_table</a> (void);</font>
- </dl>
- <hr>
- <font size="-1">
- Last update: Wed Oct 13 20:42:34 1999<br>
- piapi@csie.ntu.edu.tw
- </font>
-
-</body>
-</html>