[Layout] Xregion has been deleted from screen-update folder.
git-svn-id: svn://svn.code.sf.net/p/tigervnc/code/trunk@2778 3789f03b-4d11-0410-bbf8-ca57d06f2519
diff --git a/common/Xregion/Makefile.in b/common/Xregion/Makefile.in
deleted file mode 100644
index 878a29b..0000000
--- a/common/Xregion/Makefile.in
+++ /dev/null
@@ -1,15 +0,0 @@
-
-SRCS = Region.c
-
-OBJS = $(SRCS:.c=.o)
-
-library = libXregion.a
-
-all:: $(library)
-
-$(library): $(OBJS)
- rm -f $(library)
- $(AR) $(library) $(OBJS)
- $(RANLIB) $(library)
-
-# followed by boilerplate.mk
diff --git a/common/Xregion/Region.c b/common/Xregion/Region.c
deleted file mode 100644
index c0b1e5a..0000000
--- a/common/Xregion/Region.c
+++ /dev/null
@@ -1,1694 +0,0 @@
-/* $Xorg: Region.c,v 1.6 2001/02/09 02:03:35 xorgcvs Exp $ */
-/************************************************************************
-
-Copyright 1987, 1988, 1998 The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-
-
-Copyright 1987, 1988 by Digital Equipment Corporation, Maynard, Massachusetts.
-
- All Rights Reserved
-
-Permission to use, copy, modify, and distribute this software and its
-documentation for any purpose and without fee is hereby granted,
-provided that the above copyright notice appear in all copies and that
-both that copyright notice and this permission notice appear in
-supporting documentation, and that the name of Digital not be
-used in advertising or publicity pertaining to distribution of the
-software without specific, written prior permission.
-
-DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
-ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
-DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
-ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
-************************************************************************/
-/* $XFree86: xc/lib/X11/Region.c,v 1.8 2001/12/14 19:54:05 dawes Exp $ */
-/*
- * The functions in this file implement the Region abstraction, similar to one
- * used in the X11 sample server. A Region is simply an area, as the name
- * implies, and is implemented as a "y-x-banded" array of rectangles. To
- * explain: Each Region is made up of a certain number of rectangles sorted
- * by y coordinate first, and then by x coordinate.
- *
- * Furthermore, the rectangles are banded such that every rectangle with a
- * given upper-left y coordinate (y1) will have the same lower-right y
- * coordinate (y2) and vice versa. If a rectangle has scanlines in a band, it
- * will span the entire vertical distance of the band. This means that some
- * areas that could be merged into a taller rectangle will be represented as
- * several shorter rectangles to account for shorter rectangles to its left
- * or right but within its "vertical scope".
- *
- * An added constraint on the rectangles is that they must cover as much
- * horizontal area as possible. E.g. no two rectangles in a band are allowed
- * to touch.
- *
- * Whenever possible, bands will be merged together to cover a greater vertical
- * distance (and thus reduce the number of rectangles). Two bands can be merged
- * only if the bottom of one touches the top of the other and they have
- * rectangles in the same places (of the same width, of course). This maintains
- * the y-x-banding that's so nice to have...
- */
-
-#include "Xregion.h"
-//#include "Xlibint.h"
-//#include "Xutil.h"
-#include "region.h"
-//#include "poly.h"
-
-#ifndef min
-#define min(a,b) (((a) < (b)) ? (a) : (b))
-#endif
-#ifndef max
-#define max(a,b) (((a) > (b)) ? (a) : (b))
-#endif
-
-#ifdef DEBUG
-#include <stdio.h>
-#define assert(expr) {if (!(expr)) fprintf(stderr,\
-"Assertion failed file %s, line %d: expr\n", __FILE__, __LINE__); }
-#else
-#define assert(expr)
-#endif
-
-typedef void (*voidProcp)();
-
-static void miRegionOp();
-/* Create a new empty region */
-Region
-XCreateRegion()
-{
- Region temp;
-
- if (! (temp = ( Region )Xmalloc( (unsigned) sizeof( REGION ))))
- return (Region) NULL;
- if (! (temp->rects = ( BOX * )Xmalloc( (unsigned) sizeof( BOX )))) {
- Xfree((char *) temp);
- return (Region) NULL;
- }
- temp->numRects = 0;
- temp->extents.x1 = 0;
- temp->extents.y1 = 0;
- temp->extents.x2 = 0;
- temp->extents.y2 = 0;
- temp->size = 1;
- return( temp );
-}
-
-int
-XClipBox( r, rect )
- Region r;
- XRectangle *rect;
-{
- rect->x = r->extents.x1;
- rect->y = r->extents.y1;
- rect->width = r->extents.x2 - r->extents.x1;
- rect->height = r->extents.y2 - r->extents.y1;
- return 1;
-}
-
-int
-XUnionRectWithRegion(rect, source, dest)
- register XRectangle *rect;
- Region source, dest;
-{
- REGION region;
-
- if (!rect->width || !rect->height)
- return 0;
- region.rects = ®ion.extents;
- region.numRects = 1;
- region.extents.x1 = rect->x;
- region.extents.y1 = rect->y;
- region.extents.x2 = rect->x + rect->width;
- region.extents.y2 = rect->y + rect->height;
- region.size = 1;
-
- return XUnionRegion(®ion, source, dest);
-}
-
-/*-
- *-----------------------------------------------------------------------
- * miSetExtents --
- * Reset the extents of a region to what they should be. Called by
- * miSubtract and miIntersect b/c they can't figure it out along the
- * way or do so easily, as miUnion can.
- *
- * Results:
- * None.
- *
- * Side Effects:
- * The region's 'extents' structure is overwritten.
- *
- *-----------------------------------------------------------------------
- */
-static void
-miSetExtents (pReg)
- Region pReg;
-{
- register BoxPtr pBox,
- pBoxEnd,
- pExtents;
-
- if (pReg->numRects == 0)
- {
- pReg->extents.x1 = 0;
- pReg->extents.y1 = 0;
- pReg->extents.x2 = 0;
- pReg->extents.y2 = 0;
- return;
- }
-
- pExtents = &pReg->extents;
- pBox = pReg->rects;
- pBoxEnd = &pBox[pReg->numRects - 1];
-
- /*
- * Since pBox is the first rectangle in the region, it must have the
- * smallest y1 and since pBoxEnd is the last rectangle in the region,
- * it must have the largest y2, because of banding. Initialize x1 and
- * x2 from pBox and pBoxEnd, resp., as good things to initialize them
- * to...
- */
- pExtents->x1 = pBox->x1;
- pExtents->y1 = pBox->y1;
- pExtents->x2 = pBoxEnd->x2;
- pExtents->y2 = pBoxEnd->y2;
-
- assert(pExtents->y1 < pExtents->y2);
- while (pBox <= pBoxEnd)
- {
- if (pBox->x1 < pExtents->x1)
- {
- pExtents->x1 = pBox->x1;
- }
- if (pBox->x2 > pExtents->x2)
- {
- pExtents->x2 = pBox->x2;
- }
- pBox++;
- }
- assert(pExtents->x1 < pExtents->x2);
-}
-
-extern void _XSetClipRectangles();
-
-#if 0
-int
-XSetRegion( dpy, gc, r )
- Display *dpy;
- GC gc;
- register Region r;
-{
- register int i;
- register XRectangle *xr, *pr;
- register BOX *pb;
- unsigned long total;
-
- LockDisplay (dpy);
- total = r->numRects * sizeof (XRectangle);
- if ((xr = (XRectangle *) _XAllocTemp(dpy, total))) {
- for (pr = xr, pb = r->rects, i = r->numRects; --i >= 0; pr++, pb++) {
- pr->x = pb->x1;
- pr->y = pb->y1;
- pr->width = pb->x2 - pb->x1;
- pr->height = pb->y2 - pb->y1;
- }
- }
- if (xr || !r->numRects)
- _XSetClipRectangles(dpy, gc, 0, 0, xr, r->numRects, YXBanded);
- if (xr)
- _XFreeTemp(dpy, (char *)xr, total);
- UnlockDisplay(dpy);
- SyncHandle();
- return 1;
-}
-#endif
-
-int
-XDestroyRegion( r )
- Region r;
-{
- Xfree( (char *) r->rects );
- Xfree( (char *) r );
- return 1;
-}
-
-
-/* TranslateRegion(pRegion, x, y)
- translates in place
- added by raymond
-*/
-
-int
-XOffsetRegion(pRegion, x, y)
- register Region pRegion;
- register int x;
- register int y;
-{
- register int nbox;
- register BOX *pbox;
-
- pbox = pRegion->rects;
- nbox = pRegion->numRects;
-
- while(nbox--)
- {
- pbox->x1 += x;
- pbox->x2 += x;
- pbox->y1 += y;
- pbox->y2 += y;
- pbox++;
- }
- pRegion->extents.x1 += x;
- pRegion->extents.x2 += x;
- pRegion->extents.y1 += y;
- pRegion->extents.y2 += y;
- return 1;
-}
-
-/*
- Utility procedure Compress:
- Replace r by the region r', where
- p in r' iff (Quantifer m <= dx) (p + m in r), and
- Quantifier is Exists if grow is TRUE, For all if grow is FALSE, and
- (x,y) + m = (x+m,y) if xdir is TRUE; (x,y+m) if xdir is FALSE.
-
- Thus, if xdir is TRUE and grow is FALSE, r is replaced by the region
- of all points p such that p and the next dx points on the same
- horizontal scan line are all in r. We do this using by noting
- that p is the head of a run of length 2^i + k iff p is the head
- of a run of length 2^i and p+2^i is the head of a run of length
- k. Thus, the loop invariant: s contains the region corresponding
- to the runs of length shift. r contains the region corresponding
- to the runs of length 1 + dxo & (shift-1), where dxo is the original
- value of dx. dx = dxo & ~(shift-1). As parameters, s and t are
- scratch regions, so that we don't have to allocate them on every
- call.
-*/
-
-#define ZOpRegion(a,b,c) if (grow) XUnionRegion(a,b,c); \
- else XIntersectRegion(a,b,c)
-#define ZShiftRegion(a,b) if (xdir) XOffsetRegion(a,b,0); \
- else XOffsetRegion(a,0,b)
-#define ZCopyRegion(a,b) XUnionRegion(a,a,b)
-
-static void
-Compress(r, s, t, dx, xdir, grow)
- Region r, s, t;
- register unsigned dx;
- register int xdir, grow;
-{
- register unsigned shift = 1;
-
- ZCopyRegion(r, s);
- while (dx) {
- if (dx & shift) {
- ZShiftRegion(r, -(int)shift);
- ZOpRegion(r, s, r);
- dx -= shift;
- if (!dx) break;
- }
- ZCopyRegion(s, t);
- ZShiftRegion(s, -(int)shift);
- ZOpRegion(s, t, s);
- shift <<= 1;
- }
-}
-
-#undef ZOpRegion
-#undef ZShiftRegion
-#undef ZCopyRegion
-
-int
-XShrinkRegion(r, dx, dy)
- Region r;
- int dx, dy;
-{
- Region s, t;
- int grow;
-
- if (!dx && !dy) return 0;
- if ((! (s = XCreateRegion())) || (! (t = XCreateRegion()))) return 0;
- if ((grow = (dx < 0))) dx = -dx;
- if (dx) Compress(r, s, t, (unsigned) 2*dx, TRUE, grow);
- if ((grow = (dy < 0))) dy = -dy;
- if (dy) Compress(r, s, t, (unsigned) 2*dy, FALSE, grow);
- XOffsetRegion(r, dx, dy);
- XDestroyRegion(s);
- XDestroyRegion(t);
- return 0;
-}
-
-#ifdef notdef
-/***********************************************************
- * Bop down the array of rects until we have passed
- * scanline y. numRects is the size of the array.
- ***********************************************************/
-
-static BOX
-*IndexRects(rects, numRects, y)
- register BOX *rects;
- register int numRects;
- register int y;
-{
- while ((numRects--) && (rects->y2 <= y))
- rects++;
- return(rects);
-}
-#endif
-
-/*======================================================================
- * Region Intersection
- *====================================================================*/
-/*-
- *-----------------------------------------------------------------------
- * miIntersectO --
- * Handle an overlapping band for miIntersect.
- *
- * Results:
- * None.
- *
- * Side Effects:
- * Rectangles may be added to the region.
- *
- *-----------------------------------------------------------------------
- */
-/* static void*/
-static int
-miIntersectO (pReg, r1, r1End, r2, r2End, y1, y2)
- register Region pReg;
- register BoxPtr r1;
- BoxPtr r1End;
- register BoxPtr r2;
- BoxPtr r2End;
- short y1;
- short y2;
-{
- register short x1;
- register short x2;
- register BoxPtr pNextRect;
-
- pNextRect = &pReg->rects[pReg->numRects];
-
- while ((r1 != r1End) && (r2 != r2End))
- {
- x1 = max(r1->x1,r2->x1);
- x2 = min(r1->x2,r2->x2);
-
- /*
- * If there's any overlap between the two rectangles, add that
- * overlap to the new region.
- * There's no need to check for subsumption because the only way
- * such a need could arise is if some region has two rectangles
- * right next to each other. Since that should never happen...
- */
- if (x1 < x2)
- {
- assert(y1<y2);
-
- MEMCHECK(pReg, pNextRect, pReg->rects);
- pNextRect->x1 = x1;
- pNextRect->y1 = y1;
- pNextRect->x2 = x2;
- pNextRect->y2 = y2;
- pReg->numRects += 1;
- pNextRect++;
- assert(pReg->numRects <= pReg->size);
- }
-
- /*
- * Need to advance the pointers. Shift the one that extends
- * to the right the least, since the other still has a chance to
- * overlap with that region's next rectangle, if you see what I mean.
- */
- if (r1->x2 < r2->x2)
- {
- r1++;
- }
- else if (r2->x2 < r1->x2)
- {
- r2++;
- }
- else
- {
- r1++;
- r2++;
- }
- }
- return 0; /* lint */
-}
-
-int
-XIntersectRegion(reg1, reg2, newReg)
- Region reg1;
- Region reg2; /* source regions */
- register Region newReg; /* destination Region */
-{
- /* check for trivial reject */
- if ( (!(reg1->numRects)) || (!(reg2->numRects)) ||
- (!EXTENTCHECK(®1->extents, ®2->extents)))
- newReg->numRects = 0;
- else
- miRegionOp (newReg, reg1, reg2,
- (voidProcp) miIntersectO, (voidProcp) NULL, (voidProcp) NULL);
-
- /*
- * Can't alter newReg's extents before we call miRegionOp because
- * it might be one of the source regions and miRegionOp depends
- * on the extents of those regions being the same. Besides, this
- * way there's no checking against rectangles that will be nuked
- * due to coalescing, so we have to examine fewer rectangles.
- */
- miSetExtents(newReg);
- return 1;
-}
-
-static void
-miRegionCopy(dstrgn, rgn)
- register Region dstrgn;
- register Region rgn;
-
-{
- if (dstrgn != rgn) /* don't want to copy to itself */
- {
- if (dstrgn->size < rgn->numRects)
- {
- if (dstrgn->rects)
- {
- BOX *prevRects = dstrgn->rects;
-
- if (! (dstrgn->rects = (BOX *)
- Xrealloc((char *) dstrgn->rects,
- (unsigned) rgn->numRects * (sizeof(BOX))))) {
- Xfree(prevRects);
- return;
- }
- }
- dstrgn->size = rgn->numRects;
- }
- dstrgn->numRects = rgn->numRects;
- dstrgn->extents.x1 = rgn->extents.x1;
- dstrgn->extents.y1 = rgn->extents.y1;
- dstrgn->extents.x2 = rgn->extents.x2;
- dstrgn->extents.y2 = rgn->extents.y2;
-
- memcpy((char *) dstrgn->rects, (char *) rgn->rects,
- (int) (rgn->numRects * sizeof(BOX)));
- }
-}
-
-#ifdef notdef
-
-/*
- * combinRegs(newReg, reg1, reg2)
- * if one region is above or below the other.
-*/
-
-static void
-combineRegs(newReg, reg1, reg2)
- register Region newReg;
- Region reg1;
- Region reg2;
-{
- register Region tempReg;
- register BOX *rects;
- register BOX *rects1;
- register BOX *rects2;
- register int total;
-
- rects1 = reg1->rects;
- rects2 = reg2->rects;
-
- total = reg1->numRects + reg2->numRects;
- if (! (tempReg = XCreateRegion()))
- return;
- tempReg->size = total;
- /* region 1 is below region 2 */
- if (reg1->extents.y1 > reg2->extents.y1)
- {
- miRegionCopy(tempReg, reg2);
- rects = &tempReg->rects[tempReg->numRects];
- total -= tempReg->numRects;
- while (total--)
- *rects++ = *rects1++;
- }
- else
- {
- miRegionCopy(tempReg, reg1);
- rects = &tempReg->rects[tempReg->numRects];
- total -= tempReg->numRects;
- while (total--)
- *rects++ = *rects2++;
- }
- tempReg->extents = reg1->extents;
- tempReg->numRects = reg1->numRects + reg2->numRects;
- EXTENTS(®2->extents, tempReg);
- miRegionCopy(newReg, tempReg);
- Xfree((char *)tempReg);
-}
-
-/*
- * QuickCheck checks to see if it does not have to go through all the
- * the ugly code for the region call. It returns 1 if it did all
- * the work for Union, otherwise 0 - still work to be done.
-*/
-
-static int
-QuickCheck(newReg, reg1, reg2)
- Region newReg, reg1, reg2;
-{
-
- /* if unioning with itself or no rects to union with */
- if ( (reg1 == reg2) || (!(reg1->numRects)) )
- {
- miRegionCopy(newReg, reg2);
- return TRUE;
- }
-
- /* if nothing to union */
- if (!(reg2->numRects))
- {
- miRegionCopy(newReg, reg1);
- return TRUE;
- }
-
- /* could put an extent check to see if add above or below */
-
- if ((reg1->extents.y1 >= reg2->extents.y2) ||
- (reg2->extents.y1 >= reg1->extents.y2) )
- {
- combineRegs(newReg, reg1, reg2);
- return TRUE;
- }
- return FALSE;
-}
-
-/* TopRects(rects, reg1, reg2)
- * N.B. We now assume that reg1 and reg2 intersect. Therefore we are
- * NOT checking in the two while loops for stepping off the end of the
- * region.
- */
-
-static int
-TopRects(newReg, rects, reg1, reg2, FirstRect)
- register Region newReg;
- register BOX *rects;
- register Region reg1;
- register Region reg2;
- BOX *FirstRect;
-{
- register BOX *tempRects;
-
- /* need to add some rects from region 1 */
- if (reg1->extents.y1 < reg2->extents.y1)
- {
- tempRects = reg1->rects;
- while(tempRects->y1 < reg2->extents.y1)
- {
- MEMCHECK(newReg, rects, FirstRect);
- ADDRECTNOX(newReg,rects, tempRects->x1, tempRects->y1,
- tempRects->x2, MIN(tempRects->y2, reg2->extents.y1));
- tempRects++;
- }
- }
- /* need to add some rects from region 2 */
- if (reg2->extents.y1 < reg1->extents.y1)
- {
- tempRects = reg2->rects;
- while (tempRects->y1 < reg1->extents.y1)
- {
- MEMCHECK(newReg, rects, FirstRect);
- ADDRECTNOX(newReg, rects, tempRects->x1,tempRects->y1,
- tempRects->x2, MIN(tempRects->y2, reg1->extents.y1));
- tempRects++;
- }
- }
- return 1;
-}
-#endif
-
-/*======================================================================
- * Generic Region Operator
- *====================================================================*/
-
-/*-
- *-----------------------------------------------------------------------
- * miCoalesce --
- * Attempt to merge the boxes in the current band with those in the
- * previous one. Used only by miRegionOp.
- *
- * Results:
- * The new index for the previous band.
- *
- * Side Effects:
- * If coalescing takes place:
- * - rectangles in the previous band will have their y2 fields
- * altered.
- * - pReg->numRects will be decreased.
- *
- *-----------------------------------------------------------------------
- */
-/* static int*/
-static int
-miCoalesce (pReg, prevStart, curStart)
- register Region pReg; /* Region to coalesce */
- int prevStart; /* Index of start of previous band */
- int curStart; /* Index of start of current band */
-{
- register BoxPtr pPrevBox; /* Current box in previous band */
- register BoxPtr pCurBox; /* Current box in current band */
- register BoxPtr pRegEnd; /* End of region */
- int curNumRects; /* Number of rectangles in current
- * band */
- int prevNumRects; /* Number of rectangles in previous
- * band */
- int bandY1; /* Y1 coordinate for current band */
-
- pRegEnd = &pReg->rects[pReg->numRects];
-
- pPrevBox = &pReg->rects[prevStart];
- prevNumRects = curStart - prevStart;
-
- /*
- * Figure out how many rectangles are in the current band. Have to do
- * this because multiple bands could have been added in miRegionOp
- * at the end when one region has been exhausted.
- */
- pCurBox = &pReg->rects[curStart];
- bandY1 = pCurBox->y1;
- for (curNumRects = 0;
- (pCurBox != pRegEnd) && (pCurBox->y1 == bandY1);
- curNumRects++)
- {
- pCurBox++;
- }
-
- if (pCurBox != pRegEnd)
- {
- /*
- * If more than one band was added, we have to find the start
- * of the last band added so the next coalescing job can start
- * at the right place... (given when multiple bands are added,
- * this may be pointless -- see above).
- */
- pRegEnd--;
- while (pRegEnd[-1].y1 == pRegEnd->y1)
- {
- pRegEnd--;
- }
- curStart = pRegEnd - pReg->rects;
- pRegEnd = pReg->rects + pReg->numRects;
- }
-
- if ((curNumRects == prevNumRects) && (curNumRects != 0)) {
- pCurBox -= curNumRects;
- /*
- * The bands may only be coalesced if the bottom of the previous
- * matches the top scanline of the current.
- */
- if (pPrevBox->y2 == pCurBox->y1)
- {
- /*
- * Make sure the bands have boxes in the same places. This
- * assumes that boxes have been added in such a way that they
- * cover the most area possible. I.e. two boxes in a band must
- * have some horizontal space between them.
- */
- do
- {
- if ((pPrevBox->x1 != pCurBox->x1) ||
- (pPrevBox->x2 != pCurBox->x2))
- {
- /*
- * The bands don't line up so they can't be coalesced.
- */
- return (curStart);
- }
- pPrevBox++;
- pCurBox++;
- prevNumRects -= 1;
- } while (prevNumRects != 0);
-
- pReg->numRects -= curNumRects;
- pCurBox -= curNumRects;
- pPrevBox -= curNumRects;
-
- /*
- * The bands may be merged, so set the bottom y of each box
- * in the previous band to that of the corresponding box in
- * the current band.
- */
- do
- {
- pPrevBox->y2 = pCurBox->y2;
- pPrevBox++;
- pCurBox++;
- curNumRects -= 1;
- } while (curNumRects != 0);
-
- /*
- * If only one band was added to the region, we have to backup
- * curStart to the start of the previous band.
- *
- * If more than one band was added to the region, copy the
- * other bands down. The assumption here is that the other bands
- * came from the same region as the current one and no further
- * coalescing can be done on them since it's all been done
- * already... curStart is already in the right place.
- */
- if (pCurBox == pRegEnd)
- {
- curStart = prevStart;
- }
- else
- {
- do
- {
- *pPrevBox++ = *pCurBox++;
- } while (pCurBox != pRegEnd);
- }
-
- }
- }
- return (curStart);
-}
-
-/*-
- *-----------------------------------------------------------------------
- * miRegionOp --
- * Apply an operation to two regions. Called by miUnion, miInverse,
- * miSubtract, miIntersect...
- *
- * Results:
- * None.
- *
- * Side Effects:
- * The new region is overwritten.
- *
- * Notes:
- * The idea behind this function is to view the two regions as sets.
- * Together they cover a rectangle of area that this function divides
- * into horizontal bands where points are covered only by one region
- * or by both. For the first case, the nonOverlapFunc is called with
- * each the band and the band's upper and lower extents. For the
- * second, the overlapFunc is called to process the entire band. It
- * is responsible for clipping the rectangles in the band, though
- * this function provides the boundaries.
- * At the end of each band, the new region is coalesced, if possible,
- * to reduce the number of rectangles in the region.
- *
- *-----------------------------------------------------------------------
- */
-/* static void*/
-static void
-miRegionOp(newReg, reg1, reg2, overlapFunc, nonOverlap1Func, nonOverlap2Func)
- register Region newReg; /* Place to store result */
- Region reg1; /* First region in operation */
- Region reg2; /* 2d region in operation */
- void (*overlapFunc)(); /* Function to call for over-
- * lapping bands */
- void (*nonOverlap1Func)(); /* Function to call for non-
- * overlapping bands in region
- * 1 */
- void (*nonOverlap2Func)(); /* Function to call for non-
- * overlapping bands in region
- * 2 */
-{
- register BoxPtr r1; /* Pointer into first region */
- register BoxPtr r2; /* Pointer into 2d region */
- BoxPtr r1End; /* End of 1st region */
- BoxPtr r2End; /* End of 2d region */
- register short ybot; /* Bottom of intersection */
- register short ytop; /* Top of intersection */
- BoxPtr oldRects; /* Old rects for newReg */
- int prevBand; /* Index of start of
- * previous band in newReg */
- int curBand; /* Index of start of current
- * band in newReg */
- register BoxPtr r1BandEnd; /* End of current band in r1 */
- register BoxPtr r2BandEnd; /* End of current band in r2 */
- short top; /* Top of non-overlapping
- * band */
- short bot; /* Bottom of non-overlapping
- * band */
-
- /*
- * Initialization:
- * set r1, r2, r1End and r2End appropriately, preserve the important
- * parts of the destination region until the end in case it's one of
- * the two source regions, then mark the "new" region empty, allocating
- * another array of rectangles for it to use.
- */
- r1 = reg1->rects;
- r2 = reg2->rects;
- r1End = r1 + reg1->numRects;
- r2End = r2 + reg2->numRects;
-
- oldRects = newReg->rects;
-
- EMPTY_REGION(newReg);
-
- /*
- * Allocate a reasonable number of rectangles for the new region. The idea
- * is to allocate enough so the individual functions don't need to
- * reallocate and copy the array, which is time consuming, yet we don't
- * have to worry about using too much memory. I hope to be able to
- * nuke the Xrealloc() at the end of this function eventually.
- */
- newReg->size = max(reg1->numRects,reg2->numRects) * 2;
-
- if (! (newReg->rects = (BoxPtr)
- Xmalloc ((unsigned) (sizeof(BoxRec) * newReg->size)))) {
- newReg->size = 0;
- return;
- }
-
- /*
- * Initialize ybot and ytop.
- * In the upcoming loop, ybot and ytop serve different functions depending
- * on whether the band being handled is an overlapping or non-overlapping
- * band.
- * In the case of a non-overlapping band (only one of the regions
- * has points in the band), ybot is the bottom of the most recent
- * intersection and thus clips the top of the rectangles in that band.
- * ytop is the top of the next intersection between the two regions and
- * serves to clip the bottom of the rectangles in the current band.
- * For an overlapping band (where the two regions intersect), ytop clips
- * the top of the rectangles of both regions and ybot clips the bottoms.
- */
- if (reg1->extents.y1 < reg2->extents.y1)
- ybot = reg1->extents.y1;
- else
- ybot = reg2->extents.y1;
-
- /*
- * prevBand serves to mark the start of the previous band so rectangles
- * can be coalesced into larger rectangles. qv. miCoalesce, above.
- * In the beginning, there is no previous band, so prevBand == curBand
- * (curBand is set later on, of course, but the first band will always
- * start at index 0). prevBand and curBand must be indices because of
- * the possible expansion, and resultant moving, of the new region's
- * array of rectangles.
- */
- prevBand = 0;
-
- do
- {
- curBand = newReg->numRects;
-
- /*
- * This algorithm proceeds one source-band (as opposed to a
- * destination band, which is determined by where the two regions
- * intersect) at a time. r1BandEnd and r2BandEnd serve to mark the
- * rectangle after the last one in the current band for their
- * respective regions.
- */
- r1BandEnd = r1;
- while ((r1BandEnd != r1End) && (r1BandEnd->y1 == r1->y1))
- {
- r1BandEnd++;
- }
-
- r2BandEnd = r2;
- while ((r2BandEnd != r2End) && (r2BandEnd->y1 == r2->y1))
- {
- r2BandEnd++;
- }
-
- /*
- * First handle the band that doesn't intersect, if any.
- *
- * Note that attention is restricted to one band in the
- * non-intersecting region at once, so if a region has n
- * bands between the current position and the next place it overlaps
- * the other, this entire loop will be passed through n times.
- */
- if (r1->y1 < r2->y1)
- {
- top = max(r1->y1,ybot);
- bot = min(r1->y2,r2->y1);
-
- if ((top != bot) && (nonOverlap1Func != (void (*)())NULL))
- {
- (* nonOverlap1Func) (newReg, r1, r1BandEnd, top, bot);
- }
-
- ytop = r2->y1;
- }
- else if (r2->y1 < r1->y1)
- {
- top = max(r2->y1,ybot);
- bot = min(r2->y2,r1->y1);
-
- if ((top != bot) && (nonOverlap2Func != (void (*)())NULL))
- {
- (* nonOverlap2Func) (newReg, r2, r2BandEnd, top, bot);
- }
-
- ytop = r1->y1;
- }
- else
- {
- ytop = r1->y1;
- }
-
- /*
- * If any rectangles got added to the region, try and coalesce them
- * with rectangles from the previous band. Note we could just do
- * this test in miCoalesce, but some machines incur a not
- * inconsiderable cost for function calls, so...
- */
- if (newReg->numRects != curBand)
- {
- prevBand = miCoalesce (newReg, prevBand, curBand);
- }
-
- /*
- * Now see if we've hit an intersecting band. The two bands only
- * intersect if ybot > ytop
- */
- ybot = min(r1->y2, r2->y2);
- curBand = newReg->numRects;
- if (ybot > ytop)
- {
- (* overlapFunc) (newReg, r1, r1BandEnd, r2, r2BandEnd, ytop, ybot);
-
- }
-
- if (newReg->numRects != curBand)
- {
- prevBand = miCoalesce (newReg, prevBand, curBand);
- }
-
- /*
- * If we've finished with a band (y2 == ybot) we skip forward
- * in the region to the next band.
- */
- if (r1->y2 == ybot)
- {
- r1 = r1BandEnd;
- }
- if (r2->y2 == ybot)
- {
- r2 = r2BandEnd;
- }
- } while ((r1 != r1End) && (r2 != r2End));
-
- /*
- * Deal with whichever region still has rectangles left.
- */
- curBand = newReg->numRects;
- if (r1 != r1End)
- {
- if (nonOverlap1Func != (void (*)())NULL)
- {
- do
- {
- r1BandEnd = r1;
- while ((r1BandEnd < r1End) && (r1BandEnd->y1 == r1->y1))
- {
- r1BandEnd++;
- }
- (* nonOverlap1Func) (newReg, r1, r1BandEnd,
- max(r1->y1,ybot), r1->y2);
- r1 = r1BandEnd;
- } while (r1 != r1End);
- }
- }
- else if ((r2 != r2End) && (nonOverlap2Func != (void (*)())NULL))
- {
- do
- {
- r2BandEnd = r2;
- while ((r2BandEnd < r2End) && (r2BandEnd->y1 == r2->y1))
- {
- r2BandEnd++;
- }
- (* nonOverlap2Func) (newReg, r2, r2BandEnd,
- max(r2->y1,ybot), r2->y2);
- r2 = r2BandEnd;
- } while (r2 != r2End);
- }
-
- if (newReg->numRects != curBand)
- {
- (void) miCoalesce (newReg, prevBand, curBand);
- }
-
- /*
- * A bit of cleanup. To keep regions from growing without bound,
- * we shrink the array of rectangles to match the new number of
- * rectangles in the region. This never goes to 0, however...
- *
- * Only do this stuff if the number of rectangles allocated is more than
- * twice the number of rectangles in the region (a simple optimization...).
- */
- if (newReg->numRects < (newReg->size >> 1))
- {
- if (REGION_NOT_EMPTY(newReg))
- {
- BoxPtr prev_rects = newReg->rects;
- newReg->size = newReg->numRects;
- newReg->rects = (BoxPtr) Xrealloc ((char *) newReg->rects,
- (unsigned) (sizeof(BoxRec) * newReg->size));
- if (! newReg->rects)
- newReg->rects = prev_rects;
- }
- else
- {
- /*
- * No point in doing the extra work involved in an Xrealloc if
- * the region is empty
- */
- newReg->size = 1;
- Xfree((char *) newReg->rects);
- newReg->rects = (BoxPtr) Xmalloc(sizeof(BoxRec));
- }
- }
- Xfree ((char *) oldRects);
- return;
-}
-
-
-/*======================================================================
- * Region Union
- *====================================================================*/
-
-/*-
- *-----------------------------------------------------------------------
- * miUnionNonO --
- * Handle a non-overlapping band for the union operation. Just
- * Adds the rectangles into the region. Doesn't have to check for
- * subsumption or anything.
- *
- * Results:
- * None.
- *
- * Side Effects:
- * pReg->numRects is incremented and the final rectangles overwritten
- * with the rectangles we're passed.
- *
- *-----------------------------------------------------------------------
- */
-/* static void*/
-static int
-miUnionNonO (pReg, r, rEnd, y1, y2)
- register Region pReg;
- register BoxPtr r;
- BoxPtr rEnd;
- register short y1;
- register short y2;
-{
- register BoxPtr pNextRect;
-
- pNextRect = &pReg->rects[pReg->numRects];
-
- assert(y1 < y2);
-
- while (r != rEnd)
- {
- assert(r->x1 < r->x2);
- MEMCHECK(pReg, pNextRect, pReg->rects);
- pNextRect->x1 = r->x1;
- pNextRect->y1 = y1;
- pNextRect->x2 = r->x2;
- pNextRect->y2 = y2;
- pReg->numRects += 1;
- pNextRect++;
-
- assert(pReg->numRects<=pReg->size);
- r++;
- }
- return 0; /* lint */
-}
-
-
-/*-
- *-----------------------------------------------------------------------
- * miUnionO --
- * Handle an overlapping band for the union operation. Picks the
- * left-most rectangle each time and merges it into the region.
- *
- * Results:
- * None.
- *
- * Side Effects:
- * Rectangles are overwritten in pReg->rects and pReg->numRects will
- * be changed.
- *
- *-----------------------------------------------------------------------
- */
-
-/* static void*/
-static int
-miUnionO (pReg, r1, r1End, r2, r2End, y1, y2)
- register Region pReg;
- register BoxPtr r1;
- BoxPtr r1End;
- register BoxPtr r2;
- BoxPtr r2End;
- register short y1;
- register short y2;
-{
- register BoxPtr pNextRect;
-
- pNextRect = &pReg->rects[pReg->numRects];
-
-#define MERGERECT(r) \
- if ((pReg->numRects != 0) && \
- (pNextRect[-1].y1 == y1) && \
- (pNextRect[-1].y2 == y2) && \
- (pNextRect[-1].x2 >= r->x1)) \
- { \
- if (pNextRect[-1].x2 < r->x2) \
- { \
- pNextRect[-1].x2 = r->x2; \
- assert(pNextRect[-1].x1<pNextRect[-1].x2); \
- } \
- } \
- else \
- { \
- MEMCHECK(pReg, pNextRect, pReg->rects); \
- pNextRect->y1 = y1; \
- pNextRect->y2 = y2; \
- pNextRect->x1 = r->x1; \
- pNextRect->x2 = r->x2; \
- pReg->numRects += 1; \
- pNextRect += 1; \
- } \
- assert(pReg->numRects<=pReg->size);\
- r++;
-
- assert (y1<y2);
- while ((r1 != r1End) && (r2 != r2End))
- {
- if (r1->x1 < r2->x1)
- {
- MERGERECT(r1);
- }
- else
- {
- MERGERECT(r2);
- }
- }
-
- if (r1 != r1End)
- {
- do
- {
- MERGERECT(r1);
- } while (r1 != r1End);
- }
- else while (r2 != r2End)
- {
- MERGERECT(r2);
- }
- return 0; /* lint */
-}
-
-int
-XUnionRegion(reg1, reg2, newReg)
- Region reg1;
- Region reg2; /* source regions */
- Region newReg; /* destination Region */
-{
- /* checks all the simple cases */
-
- /*
- * Region 1 and 2 are the same or region 1 is empty
- */
- if ( (reg1 == reg2) || (!(reg1->numRects)) )
- {
- if (newReg != reg2)
- miRegionCopy(newReg, reg2);
- return 1;
- }
-
- /*
- * if nothing to union (region 2 empty)
- */
- if (!(reg2->numRects))
- {
- if (newReg != reg1)
- miRegionCopy(newReg, reg1);
- return 1;
- }
-
- /*
- * Region 1 completely subsumes region 2
- */
- if ((reg1->numRects == 1) &&
- (reg1->extents.x1 <= reg2->extents.x1) &&
- (reg1->extents.y1 <= reg2->extents.y1) &&
- (reg1->extents.x2 >= reg2->extents.x2) &&
- (reg1->extents.y2 >= reg2->extents.y2))
- {
- if (newReg != reg1)
- miRegionCopy(newReg, reg1);
- return 1;
- }
-
- /*
- * Region 2 completely subsumes region 1
- */
- if ((reg2->numRects == 1) &&
- (reg2->extents.x1 <= reg1->extents.x1) &&
- (reg2->extents.y1 <= reg1->extents.y1) &&
- (reg2->extents.x2 >= reg1->extents.x2) &&
- (reg2->extents.y2 >= reg1->extents.y2))
- {
- if (newReg != reg2)
- miRegionCopy(newReg, reg2);
- return 1;
- }
-
- miRegionOp (newReg, reg1, reg2, (voidProcp) miUnionO,
- (voidProcp) miUnionNonO, (voidProcp) miUnionNonO);
-
- newReg->extents.x1 = min(reg1->extents.x1, reg2->extents.x1);
- newReg->extents.y1 = min(reg1->extents.y1, reg2->extents.y1);
- newReg->extents.x2 = max(reg1->extents.x2, reg2->extents.x2);
- newReg->extents.y2 = max(reg1->extents.y2, reg2->extents.y2);
-
- return 1;
-}
-
-
-/*======================================================================
- * Region Subtraction
- *====================================================================*/
-
-/*-
- *-----------------------------------------------------------------------
- * miSubtractNonO --
- * Deal with non-overlapping band for subtraction. Any parts from
- * region 2 we discard. Anything from region 1 we add to the region.
- *
- * Results:
- * None.
- *
- * Side Effects:
- * pReg may be affected.
- *
- *-----------------------------------------------------------------------
- */
-/* static void*/
-static int
-miSubtractNonO1 (pReg, r, rEnd, y1, y2)
- register Region pReg;
- register BoxPtr r;
- BoxPtr rEnd;
- register short y1;
- register short y2;
-{
- register BoxPtr pNextRect;
-
- pNextRect = &pReg->rects[pReg->numRects];
-
- assert(y1<y2);
-
- while (r != rEnd)
- {
- assert(r->x1<r->x2);
- MEMCHECK(pReg, pNextRect, pReg->rects);
- pNextRect->x1 = r->x1;
- pNextRect->y1 = y1;
- pNextRect->x2 = r->x2;
- pNextRect->y2 = y2;
- pReg->numRects += 1;
- pNextRect++;
-
- assert(pReg->numRects <= pReg->size);
-
- r++;
- }
- return 0; /* lint */
-}
-
-/*-
- *-----------------------------------------------------------------------
- * miSubtractO --
- * Overlapping band subtraction. x1 is the left-most point not yet
- * checked.
- *
- * Results:
- * None.
- *
- * Side Effects:
- * pReg may have rectangles added to it.
- *
- *-----------------------------------------------------------------------
- */
-/* static void*/
-static int
-miSubtractO (pReg, r1, r1End, r2, r2End, y1, y2)
- register Region pReg;
- register BoxPtr r1;
- BoxPtr r1End;
- register BoxPtr r2;
- BoxPtr r2End;
- register short y1;
- register short y2;
-{
- register BoxPtr pNextRect;
- register int x1;
-
- x1 = r1->x1;
-
- assert(y1<y2);
- pNextRect = &pReg->rects[pReg->numRects];
-
- while ((r1 != r1End) && (r2 != r2End))
- {
- if (r2->x2 <= x1)
- {
- /*
- * Subtrahend missed the boat: go to next subtrahend.
- */
- r2++;
- }
- else if (r2->x1 <= x1)
- {
- /*
- * Subtrahend preceeds minuend: nuke left edge of minuend.
- */
- x1 = r2->x2;
- if (x1 >= r1->x2)
- {
- /*
- * Minuend completely covered: advance to next minuend and
- * reset left fence to edge of new minuend.
- */
- r1++;
- if (r1 != r1End)
- x1 = r1->x1;
- }
- else
- {
- /*
- * Subtrahend now used up since it doesn't extend beyond
- * minuend
- */
- r2++;
- }
- }
- else if (r2->x1 < r1->x2)
- {
- /*
- * Left part of subtrahend covers part of minuend: add uncovered
- * part of minuend to region and skip to next subtrahend.
- */
- assert(x1<r2->x1);
- MEMCHECK(pReg, pNextRect, pReg->rects);
- pNextRect->x1 = x1;
- pNextRect->y1 = y1;
- pNextRect->x2 = r2->x1;
- pNextRect->y2 = y2;
- pReg->numRects += 1;
- pNextRect++;
-
- assert(pReg->numRects<=pReg->size);
-
- x1 = r2->x2;
- if (x1 >= r1->x2)
- {
- /*
- * Minuend used up: advance to new...
- */
- r1++;
- if (r1 != r1End)
- x1 = r1->x1;
- }
- else
- {
- /*
- * Subtrahend used up
- */
- r2++;
- }
- }
- else
- {
- /*
- * Minuend used up: add any remaining piece before advancing.
- */
- if (r1->x2 > x1)
- {
- MEMCHECK(pReg, pNextRect, pReg->rects);
- pNextRect->x1 = x1;
- pNextRect->y1 = y1;
- pNextRect->x2 = r1->x2;
- pNextRect->y2 = y2;
- pReg->numRects += 1;
- pNextRect++;
- assert(pReg->numRects<=pReg->size);
- }
- r1++;
- if (r1 != r1End)
- x1 = r1->x1;
- }
- }
-
- /*
- * Add remaining minuend rectangles to region.
- */
- while (r1 != r1End)
- {
- assert(x1<r1->x2);
- MEMCHECK(pReg, pNextRect, pReg->rects);
- pNextRect->x1 = x1;
- pNextRect->y1 = y1;
- pNextRect->x2 = r1->x2;
- pNextRect->y2 = y2;
- pReg->numRects += 1;
- pNextRect++;
-
- assert(pReg->numRects<=pReg->size);
-
- r1++;
- if (r1 != r1End)
- {
- x1 = r1->x1;
- }
- }
- return 0; /* lint */
-}
-
-/*-
- *-----------------------------------------------------------------------
- * miSubtract --
- * Subtract regS from regM and leave the result in regD.
- * S stands for subtrahend, M for minuend and D for difference.
- *
- * Results:
- * TRUE.
- *
- * Side Effects:
- * regD is overwritten.
- *
- *-----------------------------------------------------------------------
- */
-
-int
-XSubtractRegion(regM, regS, regD)
- Region regM;
- Region regS;
- register Region regD;
-{
- /* check for trivial reject */
- if ( (!(regM->numRects)) || (!(regS->numRects)) ||
- (!EXTENTCHECK(®M->extents, ®S->extents)) )
- {
- miRegionCopy(regD, regM);
- return 1;
- }
-
- miRegionOp (regD, regM, regS, (voidProcp) miSubtractO,
- (voidProcp) miSubtractNonO1, (voidProcp) NULL);
-
- /*
- * Can't alter newReg's extents before we call miRegionOp because
- * it might be one of the source regions and miRegionOp depends
- * on the extents of those regions being the unaltered. Besides, this
- * way there's no checking against rectangles that will be nuked
- * due to coalescing, so we have to examine fewer rectangles.
- */
- miSetExtents (regD);
- return 1;
-}
-
-int
-XXorRegion( sra, srb, dr )
- Region sra, srb, dr;
-{
- Region tra, trb;
-
- if ((! (tra = XCreateRegion())) || (! (trb = XCreateRegion())))
- return 0;
- (void) XSubtractRegion(sra,srb,tra);
- (void) XSubtractRegion(srb,sra,trb);
- (void) XUnionRegion(tra,trb,dr);
- XDestroyRegion(tra);
- XDestroyRegion(trb);
- return 0;
-}
-
-/*
- * Check to see if the region is empty. Assumes a region is passed
- * as a parameter
- */
-int
-XEmptyRegion( r )
- Region r;
-{
- if( r->numRects == 0 ) return TRUE;
- else return FALSE;
-}
-
-/*
- * Check to see if two regions are equal
- */
-int
-XEqualRegion( r1, r2 )
- Region r1, r2;
-{
- int i;
-
- if( r1->numRects != r2->numRects ) return FALSE;
- else if( r1->numRects == 0 ) return TRUE;
- else if ( r1->extents.x1 != r2->extents.x1 ) return FALSE;
- else if ( r1->extents.x2 != r2->extents.x2 ) return FALSE;
- else if ( r1->extents.y1 != r2->extents.y1 ) return FALSE;
- else if ( r1->extents.y2 != r2->extents.y2 ) return FALSE;
- else for( i=0; i < r1->numRects; i++ ) {
- if ( r1->rects[i].x1 != r2->rects[i].x1 ) return FALSE;
- else if ( r1->rects[i].x2 != r2->rects[i].x2 ) return FALSE;
- else if ( r1->rects[i].y1 != r2->rects[i].y1 ) return FALSE;
- else if ( r1->rects[i].y2 != r2->rects[i].y2 ) return FALSE;
- }
- return TRUE;
-}
-
-int
-XPointInRegion( pRegion, x, y )
- Region pRegion;
- int x, y;
-{
- int i;
-
- if (pRegion->numRects == 0)
- return FALSE;
- if (!INBOX(pRegion->extents, x, y))
- return FALSE;
- for (i=0; i<pRegion->numRects; i++)
- {
- if (INBOX (pRegion->rects[i], x, y))
- return TRUE;
- }
- return FALSE;
-}
-
-int
-XRectInRegion(region, rx, ry, rwidth, rheight)
- register Region region;
- int rx, ry;
- unsigned int rwidth, rheight;
-{
- register BoxPtr pbox;
- register BoxPtr pboxEnd;
- Box rect;
- register BoxPtr prect = ▭
- int partIn, partOut;
-
- prect->x1 = rx;
- prect->y1 = ry;
- prect->x2 = rwidth + rx;
- prect->y2 = rheight + ry;
-
- /* this is (just) a useful optimization */
- if ((region->numRects == 0) || !EXTENTCHECK(®ion->extents, prect))
- return(RectangleOut);
-
- partOut = FALSE;
- partIn = FALSE;
-
- /* can stop when both partOut and partIn are TRUE, or we reach prect->y2 */
- for (pbox = region->rects, pboxEnd = pbox + region->numRects;
- pbox < pboxEnd;
- pbox++)
- {
-
- if (pbox->y2 <= ry)
- continue; /* getting up to speed or skipping remainder of band */
-
- if (pbox->y1 > ry)
- {
- partOut = TRUE; /* missed part of rectangle above */
- if (partIn || (pbox->y1 >= prect->y2))
- break;
- ry = pbox->y1; /* x guaranteed to be == prect->x1 */
- }
-
- if (pbox->x2 <= rx)
- continue; /* not far enough over yet */
-
- if (pbox->x1 > rx)
- {
- partOut = TRUE; /* missed part of rectangle to left */
- if (partIn)
- break;
- }
-
- if (pbox->x1 < prect->x2)
- {
- partIn = TRUE; /* definitely overlap */
- if (partOut)
- break;
- }
-
- if (pbox->x2 >= prect->x2)
- {
- ry = pbox->y2; /* finished with this band */
- if (ry >= prect->y2)
- break;
- rx = prect->x1; /* reset x out to left again */
- } else
- {
- /*
- * Because boxes in a band are maximal width, if the first box
- * to overlap the rectangle doesn't completely cover it in that
- * band, the rectangle must be partially out, since some of it
- * will be uncovered in that band. partIn will have been set true
- * by now...
- */
- break;
- }
-
- }
-
- return(partIn ? ((ry < prect->y2) ? RectanglePart : RectangleIn) :
- RectangleOut);
-}
diff --git a/common/Xregion/Xregion.dsp b/common/Xregion/Xregion.dsp
deleted file mode 100644
index e30b518..0000000
--- a/common/Xregion/Xregion.dsp
+++ /dev/null
@@ -1,132 +0,0 @@
-# Microsoft Developer Studio Project File - Name="Xregion" - Package Owner=<4>
-# Microsoft Developer Studio Generated Build File, Format Version 6.00
-# ** DO NOT EDIT **
-
-# TARGTYPE "Win32 (x86) Static Library" 0x0104
-
-CFG=Xregion - Win32 Debug Unicode
-!MESSAGE This is not a valid makefile. To build this project using NMAKE,
-!MESSAGE use the Export Makefile command and run
-!MESSAGE
-!MESSAGE NMAKE /f "Xregion.mak".
-!MESSAGE
-!MESSAGE You can specify a configuration when running NMAKE
-!MESSAGE by defining the macro CFG on the command line. For example:
-!MESSAGE
-!MESSAGE NMAKE /f "Xregion.mak" CFG="Xregion - Win32 Debug Unicode"
-!MESSAGE
-!MESSAGE Possible choices for configuration are:
-!MESSAGE
-!MESSAGE "Xregion - Win32 Release" (based on "Win32 (x86) Static Library")
-!MESSAGE "Xregion - Win32 Debug" (based on "Win32 (x86) Static Library")
-!MESSAGE "Xregion - Win32 Debug Unicode" (based on "Win32 (x86) Static Library")
-!MESSAGE
-
-# Begin Project
-# PROP AllowPerConfigDependencies 0
-# PROP Scc_ProjName ""
-# PROP Scc_LocalPath ""
-CPP=cl.exe
-RSC=rc.exe
-
-!IF "$(CFG)" == "Xregion - Win32 Release"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 0
-# PROP BASE Output_Dir "Release"
-# PROP BASE Intermediate_Dir "Release"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 0
-# PROP Output_Dir "..\Release"
-# PROP Intermediate_Dir "..\Release\Xregion"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
-# ADD CPP /nologo /MT /W3 /GX /O2 /I ".." /D "NDEBUG" /D "_LIB" /D "WIN32" /D "_MBCS" /YX /FD /c
-# ADD BASE RSC /l 0x809 /d "NDEBUG"
-# ADD RSC /l 0x809 /d "NDEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ELSEIF "$(CFG)" == "Xregion - Win32 Debug"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Debug"
-# PROP BASE Intermediate_Dir "Debug"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "..\Debug"
-# PROP Intermediate_Dir "..\Debug\Xregion"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
-# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /I ".." /D "_DEBUG" /D "_LIB" /D "WIN32" /D "_MBCS" /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ELSEIF "$(CFG)" == "Xregion - Win32 Debug Unicode"
-
-# PROP BASE Use_MFC 0
-# PROP BASE Use_Debug_Libraries 1
-# PROP BASE Output_Dir "Xregion___Win32_Debug_Unicode"
-# PROP BASE Intermediate_Dir "Xregion___Win32_Debug_Unicode"
-# PROP BASE Target_Dir ""
-# PROP Use_MFC 0
-# PROP Use_Debug_Libraries 1
-# PROP Output_Dir "..\Debug_Unicode"
-# PROP Intermediate_Dir "..\Debug_Unicode\Xregion"
-# PROP Target_Dir ""
-# ADD BASE CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /I ".." /D "_DEBUG" /D "_LIB" /D "WIN32" /D "_MBCS" /FD /GZ /c
-# SUBTRACT BASE CPP /YX
-# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /I ".." /D "_LIB" /D "_DEBUG" /D "WIN32" /D "_UNICODE" /D "UNICODE" /FD /GZ /c
-# SUBTRACT CPP /YX
-# ADD BASE RSC /l 0x809 /d "_DEBUG"
-# ADD RSC /l 0x809 /d "_DEBUG"
-BSC32=bscmake.exe
-# ADD BASE BSC32 /nologo
-# ADD BSC32 /nologo
-LIB32=link.exe -lib
-# ADD BASE LIB32 /nologo
-# ADD LIB32 /nologo
-
-!ENDIF
-
-# Begin Target
-
-# Name "Xregion - Win32 Release"
-# Name "Xregion - Win32 Debug"
-# Name "Xregion - Win32 Debug Unicode"
-# Begin Group "Source Files"
-
-# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
-# Begin Source File
-
-SOURCE=.\Region.c
-# End Source File
-# End Group
-# Begin Group "Header Files"
-
-# PROP Default_Filter "h;hpp;hxx;hm;inl"
-# Begin Source File
-
-SOURCE=.\region.h
-# End Source File
-# Begin Source File
-
-SOURCE=.\Xregion.h
-# End Source File
-# End Group
-# End Target
-# End Project
diff --git a/common/Xregion/Xregion.h b/common/Xregion/Xregion.h
deleted file mode 100644
index e8c9a4f..0000000
--- a/common/Xregion/Xregion.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* $Xorg: Xutil.h,v 1.8 2001/02/09 02:03:39 xorgcvs Exp $ */
-
-/***********************************************************
-
-Copyright 1987, 1998 The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-
-
-Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
-
- All Rights Reserved
-
-Permission to use, copy, modify, and distribute this software and its
-documentation for any purpose and without fee is hereby granted,
-provided that the above copyright notice appear in all copies and that
-both that copyright notice and this permission notice appear in
-supporting documentation, and that the name of Digital not be
-used in advertising or publicity pertaining to distribution of the
-software without specific, written prior permission.
-
-DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
-ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
-DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
-ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
-******************************************************************/
-/* $XFree86: xc/lib/X11/Xutil.h,v 3.4 2001/12/14 19:54:10 dawes Exp $ */
-
-#ifndef _XREGION_H_
-#define _XREGION_H_
-
-// - Faked defines to fool the X11 region code
-
-#include <stdlib.h>
-#include <string.h>
-
-#define Bool int
-#define Xmalloc malloc
-#define Xfree free
-#define Xrealloc realloc
-
-#define NeedFunctionPrototypes 1
-
-// - Cribbed from Xlib.h
-
-typedef struct {
- short x, y;
-} XPoint;
-
-typedef struct {
- short x, y;
- unsigned short width, height;
-} XRectangle;
-
-/*
- * opaque reference to Region data type
- */
-typedef struct _XRegion *Region;
-
-/* Return values from XRectInRegion() */
-
-#define RectangleOut 0
-#define RectangleIn 1
-#define RectanglePart 2
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-extern int XClipBox(
-#if NeedFunctionPrototypes
- Region /* r */,
- XRectangle* /* rect_return */
-#endif
-);
-
-extern Region XCreateRegion(
-#if NeedFunctionPrototypes
- void
-#endif
-);
-
-extern const char *XDefaultString (void);
-
-extern int XDestroyRegion(
-#if NeedFunctionPrototypes
- Region /* r */
-#endif
-);
-
-extern int XEmptyRegion(
-#if NeedFunctionPrototypes
- Region /* r */
-#endif
-);
-
-extern int XEqualRegion(
-#if NeedFunctionPrototypes
- Region /* r1 */,
- Region /* r2 */
-#endif
-);
-
-extern int XIntersectRegion(
-#if NeedFunctionPrototypes
- Region /* sra */,
- Region /* srb */,
- Region /* dr_return */
-#endif
-);
-
-extern int XOffsetRegion(
-#if NeedFunctionPrototypes
- Region /* r */,
- int /* dx */,
- int /* dy */
-#endif
-);
-
-extern Bool XPointInRegion(
-#if NeedFunctionPrototypes
- Region /* r */,
- int /* x */,
- int /* y */
-#endif
-);
-
-extern Region XPolygonRegion(
-#if NeedFunctionPrototypes
- XPoint* /* points */,
- int /* n */,
- int /* fill_rule */
-#endif
-);
-
-extern int XRectInRegion(
-#if NeedFunctionPrototypes
- Region /* r */,
- int /* x */,
- int /* y */,
- unsigned int /* width */,
- unsigned int /* height */
-#endif
-);
-
-extern int XShrinkRegion(
-#if NeedFunctionPrototypes
- Region /* r */,
- int /* dx */,
- int /* dy */
-#endif
-);
-
-extern int XSubtractRegion(
-#if NeedFunctionPrototypes
- Region /* sra */,
- Region /* srb */,
- Region /* dr_return */
-#endif
-);
-
-extern int XUnionRectWithRegion(
-#if NeedFunctionPrototypes
- XRectangle* /* rectangle */,
- Region /* src_region */,
- Region /* dest_region_return */
-#endif
-);
-
-extern int XUnionRegion(
-#if NeedFunctionPrototypes
- Region /* sra */,
- Region /* srb */,
- Region /* dr_return */
-#endif
-);
-
-extern int XXorRegion(
-#if NeedFunctionPrototypes
- Region /* sra */,
- Region /* srb */,
- Region /* dr_return */
-#endif
-);
-
-#ifdef __cplusplus
-};
-#endif
-
-#endif /* _XUTIL_H_ */
diff --git a/common/Xregion/Xregion.vcproj b/common/Xregion/Xregion.vcproj
deleted file mode 100644
index 9e035cb..0000000
--- a/common/Xregion/Xregion.vcproj
+++ /dev/null
@@ -1,298 +0,0 @@
-<?xml version="1.0" encoding="windows-1251"?>
-<VisualStudioProject
- ProjectType="Visual C++"
- Version="9,00"
- Name="Xregion"
- ProjectGUID="{FD11D041-F493-4C07-BC3D-6E7DEE802463}"
- TargetFrameworkVersion="0"
- >
- <Platforms>
- <Platform
- Name="Win32"
- />
- </Platforms>
- <ToolFiles>
- </ToolFiles>
- <Configurations>
- <Configuration
- Name="Debug Unicode|Win32"
- OutputDirectory=".\..\Debug_Unicode"
- IntermediateDirectory=".\..\Debug_Unicode\Xregion"
- ConfigurationType="4"
- InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
- UseOfMFC="0"
- ATLMinimizesCRunTimeLibraryUsage="false"
- CharacterSet="1"
- >
- <Tool
- Name="VCPreBuildEventTool"
- />
- <Tool
- Name="VCCustomBuildTool"
- />
- <Tool
- Name="VCXMLDataGeneratorTool"
- />
- <Tool
- Name="VCWebServiceProxyGeneratorTool"
- />
- <Tool
- Name="VCMIDLTool"
- />
- <Tool
- Name="VCCLCompilerTool"
- Optimization="0"
- AdditionalIncludeDirectories=".."
- PreprocessorDefinitions="_LIB;_DEBUG;WIN32;UNICODE"
- MinimalRebuild="true"
- BasicRuntimeChecks="3"
- RuntimeLibrary="1"
- PrecompiledHeaderFile=".\..\Debug_Unicode\Xregion/Xregion.pch"
- AssemblerListingLocation=".\..\Debug_Unicode\Xregion/"
- ObjectFile=".\..\Debug_Unicode\Xregion/"
- ProgramDataBaseFileName=".\..\Debug_Unicode\Xregion/"
- WarningLevel="3"
- SuppressStartupBanner="true"
- DebugInformationFormat="4"
- />
- <Tool
- Name="VCManagedResourceCompilerTool"
- />
- <Tool
- Name="VCResourceCompilerTool"
- PreprocessorDefinitions="_DEBUG"
- Culture="2057"
- />
- <Tool
- Name="VCPreLinkEventTool"
- />
- <Tool
- Name="VCLibrarianTool"
- OutputFile=".\..\Debug_Unicode\Xregion.lib"
- SuppressStartupBanner="true"
- />
- <Tool
- Name="VCALinkTool"
- />
- <Tool
- Name="VCXDCMakeTool"
- />
- <Tool
- Name="VCBscMakeTool"
- SuppressStartupBanner="true"
- OutputFile=".\..\Debug_Unicode/Xregion.bsc"
- />
- <Tool
- Name="VCFxCopTool"
- />
- <Tool
- Name="VCPostBuildEventTool"
- />
- </Configuration>
- <Configuration
- Name="Debug|Win32"
- OutputDirectory=".\..\Debug"
- IntermediateDirectory=".\..\Debug\Xregion"
- ConfigurationType="4"
- InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
- UseOfMFC="0"
- ATLMinimizesCRunTimeLibraryUsage="false"
- CharacterSet="2"
- >
- <Tool
- Name="VCPreBuildEventTool"
- />
- <Tool
- Name="VCCustomBuildTool"
- />
- <Tool
- Name="VCXMLDataGeneratorTool"
- />
- <Tool
- Name="VCWebServiceProxyGeneratorTool"
- />
- <Tool
- Name="VCMIDLTool"
- />
- <Tool
- Name="VCCLCompilerTool"
- Optimization="0"
- AdditionalIncludeDirectories=".."
- PreprocessorDefinitions="_DEBUG;_LIB;WIN32"
- MinimalRebuild="true"
- BasicRuntimeChecks="3"
- RuntimeLibrary="1"
- PrecompiledHeaderFile=".\..\Debug\Xregion/Xregion.pch"
- AssemblerListingLocation=".\..\Debug\Xregion/"
- ObjectFile=".\..\Debug\Xregion/"
- ProgramDataBaseFileName=".\..\Debug\Xregion/"
- WarningLevel="3"
- SuppressStartupBanner="true"
- DebugInformationFormat="4"
- />
- <Tool
- Name="VCManagedResourceCompilerTool"
- />
- <Tool
- Name="VCResourceCompilerTool"
- PreprocessorDefinitions="_DEBUG"
- Culture="2057"
- />
- <Tool
- Name="VCPreLinkEventTool"
- />
- <Tool
- Name="VCLibrarianTool"
- OutputFile=".\..\Debug\Xregion.lib"
- SuppressStartupBanner="true"
- />
- <Tool
- Name="VCALinkTool"
- />
- <Tool
- Name="VCXDCMakeTool"
- />
- <Tool
- Name="VCBscMakeTool"
- SuppressStartupBanner="true"
- OutputFile=".\..\Debug/Xregion.bsc"
- />
- <Tool
- Name="VCFxCopTool"
- />
- <Tool
- Name="VCPostBuildEventTool"
- />
- </Configuration>
- <Configuration
- Name="Release|Win32"
- OutputDirectory=".\..\Release"
- IntermediateDirectory=".\..\Release\Xregion"
- ConfigurationType="4"
- InheritedPropertySheets="$(VCInstallDir)VCProjectDefaults\UpgradeFromVC60.vsprops"
- UseOfMFC="0"
- ATLMinimizesCRunTimeLibraryUsage="false"
- CharacterSet="2"
- >
- <Tool
- Name="VCPreBuildEventTool"
- />
- <Tool
- Name="VCCustomBuildTool"
- />
- <Tool
- Name="VCXMLDataGeneratorTool"
- />
- <Tool
- Name="VCWebServiceProxyGeneratorTool"
- />
- <Tool
- Name="VCMIDLTool"
- />
- <Tool
- Name="VCCLCompilerTool"
- Optimization="2"
- InlineFunctionExpansion="1"
- AdditionalIncludeDirectories=".."
- PreprocessorDefinitions="NDEBUG;_LIB;WIN32"
- StringPooling="true"
- RuntimeLibrary="0"
- EnableFunctionLevelLinking="true"
- PrecompiledHeaderFile=".\..\Release\Xregion/Xregion.pch"
- AssemblerListingLocation=".\..\Release\Xregion/"
- ObjectFile=".\..\Release\Xregion/"
- ProgramDataBaseFileName=".\..\Release\Xregion/"
- WarningLevel="3"
- SuppressStartupBanner="true"
- />
- <Tool
- Name="VCManagedResourceCompilerTool"
- />
- <Tool
- Name="VCResourceCompilerTool"
- PreprocessorDefinitions="NDEBUG"
- Culture="2057"
- />
- <Tool
- Name="VCPreLinkEventTool"
- />
- <Tool
- Name="VCLibrarianTool"
- OutputFile=".\..\Release\Xregion.lib"
- SuppressStartupBanner="true"
- />
- <Tool
- Name="VCALinkTool"
- />
- <Tool
- Name="VCXDCMakeTool"
- />
- <Tool
- Name="VCBscMakeTool"
- SuppressStartupBanner="true"
- OutputFile=".\..\Release/Xregion.bsc"
- />
- <Tool
- Name="VCFxCopTool"
- />
- <Tool
- Name="VCPostBuildEventTool"
- />
- </Configuration>
- </Configurations>
- <References>
- </References>
- <Files>
- <Filter
- Name="Source Files"
- Filter="cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
- >
- <File
- RelativePath="Region.c"
- >
- <FileConfiguration
- Name="Debug Unicode|Win32"
- >
- <Tool
- Name="VCCLCompilerTool"
- AdditionalIncludeDirectories=""
- PreprocessorDefinitions=""
- />
- </FileConfiguration>
- <FileConfiguration
- Name="Debug|Win32"
- >
- <Tool
- Name="VCCLCompilerTool"
- AdditionalIncludeDirectories=""
- PreprocessorDefinitions=""
- />
- </FileConfiguration>
- <FileConfiguration
- Name="Release|Win32"
- >
- <Tool
- Name="VCCLCompilerTool"
- AdditionalIncludeDirectories=""
- PreprocessorDefinitions=""
- />
- </FileConfiguration>
- </File>
- </Filter>
- <Filter
- Name="Header Files"
- Filter="h;hpp;hxx;hm;inl"
- >
- <File
- RelativePath="region.h"
- >
- </File>
- <File
- RelativePath="Xregion.h"
- >
- </File>
- </Filter>
- </Files>
- <Globals>
- </Globals>
-</VisualStudioProject>
diff --git a/common/Xregion/region.h b/common/Xregion/region.h
deleted file mode 100644
index 2ddf12c..0000000
--- a/common/Xregion/region.h
+++ /dev/null
@@ -1,190 +0,0 @@
-/* $Xorg: region.h,v 1.4 2001/02/09 02:03:40 xorgcvs Exp $ */
-/************************************************************************
-
-Copyright 1987, 1998 The Open Group
-
-Permission to use, copy, modify, distribute, and sell this software and its
-documentation for any purpose is hereby granted without fee, provided that
-the above copyright notice appear in all copies and that both that
-copyright notice and this permission notice appear in supporting
-documentation.
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
-CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
-Except as contained in this notice, the name of The Open Group shall not be
-used in advertising or otherwise to promote the sale, use or other dealings
-in this Software without prior written authorization from The Open Group.
-
-
-Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
-
- All Rights Reserved
-
-Permission to use, copy, modify, and distribute this software and its
-documentation for any purpose and without fee is hereby granted,
-provided that the above copyright notice appear in all copies and that
-both that copyright notice and this permission notice appear in
-supporting documentation, and that the name of Digital not be
-used in advertising or publicity pertaining to distribution of the
-software without specific, written prior permission.
-
-DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
-ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
-DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
-ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
-WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
-ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
-SOFTWARE.
-
-************************************************************************/
-
-#ifndef _XREGION_H
-#define _XREGION_H
-
-typedef struct {
- short x1, x2, y1, y2;
-} Box, BOX, BoxRec, *BoxPtr;
-
-typedef struct {
- short x, y, width, height;
-}RECTANGLE, RectangleRec, *RectanglePtr;
-
-#define TRUE 1
-#define FALSE 0
-#define MAXSHORT 32767
-#define MINSHORT -MAXSHORT
-#ifndef MAX
-#define MAX(a,b) (((a) > (b)) ? (a) : (b))
-#endif
-#ifndef MIN
-#define MIN(a,b) (((a) < (b)) ? (a) : (b))
-#endif
-
-
-/*
- * clip region
- */
-
-typedef struct _XRegion {
- long size;
- long numRects;
- BOX *rects;
- BOX extents;
-} REGION;
-
-/* Xutil.h contains the declaration:
- * typedef struct _XRegion *Region;
- */
-
-/* 1 if two BOXs overlap.
- * 0 if two BOXs do not overlap.
- * Remember, x2 and y2 are not in the region
- */
-#define EXTENTCHECK(r1, r2) \
- ((r1)->x2 > (r2)->x1 && \
- (r1)->x1 < (r2)->x2 && \
- (r1)->y2 > (r2)->y1 && \
- (r1)->y1 < (r2)->y2)
-
-/*
- * update region extents
- */
-#define EXTENTS(r,idRect){\
- if((r)->x1 < (idRect)->extents.x1)\
- (idRect)->extents.x1 = (r)->x1;\
- if((r)->y1 < (idRect)->extents.y1)\
- (idRect)->extents.y1 = (r)->y1;\
- if((r)->x2 > (idRect)->extents.x2)\
- (idRect)->extents.x2 = (r)->x2;\
- if((r)->y2 > (idRect)->extents.y2)\
- (idRect)->extents.y2 = (r)->y2;\
- }
-
-/*
- * Check to see if there is enough memory in the present region.
- */
-#define MEMCHECK(reg, rect, firstrect){\
- if ((reg)->numRects >= ((reg)->size - 1)){\
- (firstrect) = (BOX *) Xrealloc \
- ((char *)(firstrect), (unsigned) (2 * (sizeof(BOX)) * ((reg)->size)));\
- if ((firstrect) == 0)\
- return(0);\
- (reg)->size *= 2;\
- (rect) = &(firstrect)[(reg)->numRects];\
- }\
- }
-
-/* this routine checks to see if the previous rectangle is the same
- * or subsumes the new rectangle to add.
- */
-
-#define CHECK_PREVIOUS(Reg, R, Rx1, Ry1, Rx2, Ry2)\
- (!(((Reg)->numRects > 0)&&\
- ((R-1)->y1 == (Ry1)) &&\
- ((R-1)->y2 == (Ry2)) &&\
- ((R-1)->x1 <= (Rx1)) &&\
- ((R-1)->x2 >= (Rx2))))
-
-/* add a rectangle to the given Region */
-#define ADDRECT(reg, r, rx1, ry1, rx2, ry2){\
- if (((rx1) < (rx2)) && ((ry1) < (ry2)) &&\
- CHECK_PREVIOUS((reg), (r), (rx1), (ry1), (rx2), (ry2))){\
- (r)->x1 = (rx1);\
- (r)->y1 = (ry1);\
- (r)->x2 = (rx2);\
- (r)->y2 = (ry2);\
- EXTENTS((r), (reg));\
- (reg)->numRects++;\
- (r)++;\
- }\
- }
-
-
-
-/* add a rectangle to the given Region */
-#define ADDRECTNOX(reg, r, rx1, ry1, rx2, ry2){\
- if ((rx1 < rx2) && (ry1 < ry2) &&\
- CHECK_PREVIOUS((reg), (r), (rx1), (ry1), (rx2), (ry2))){\
- (r)->x1 = (rx1);\
- (r)->y1 = (ry1);\
- (r)->x2 = (rx2);\
- (r)->y2 = (ry2);\
- (reg)->numRects++;\
- (r)++;\
- }\
- }
-
-#define EMPTY_REGION(pReg) pReg->numRects = 0
-
-#define REGION_NOT_EMPTY(pReg) pReg->numRects
-
-#define INBOX(r, x, y) \
- ( ( ((r).x2 > x)) && \
- ( ((r).x1 <= x)) && \
- ( ((r).y2 > y)) && \
- ( ((r).y1 <= y)) )
-
-/*
- * number of points to buffer before sending them off
- * to scanlines() : Must be an even number
- */
-#define NUMPTSTOBUFFER 200
-
-/*
- * used to allocate buffers for points and link
- * the buffers together
- */
-typedef struct _POINTBLOCK {
- XPoint pts[NUMPTSTOBUFFER];
- struct _POINTBLOCK *next;
-} POINTBLOCK;
-
-#endif