diff --git a/unix/vncconfig/vncconfig.man b/unix/vncconfig/vncconfig.man
index aa35303..6695be3 100644
--- a/unix/vncconfig/vncconfig.man
+++ b/unix/vncconfig/vncconfig.man
@@ -64,26 +64,26 @@
 server). \fIhost\fP is the host where the listening viewer is running. If it's
 not listening on the default port of 5500, you can specify \fIhost:port\fP
 instead.
-
+.
 .TP
 .B \-disconnect
 This causes Xvnc to disconnect from all viewers so that the VNC desktop is not
 displayed anywhere.
-
+.
 .TP
 [\fB-set\fP] \fIXvnc-param\fP=\fIvalue\fP
 Sets an Xvnc parameter to the given value.  Note that some of Xvnc's parameters
 are read only once at startup so that changing them in this way may not have
 any effect.
-
+.
 .TP
 .B \-list
 Lists all the parameters supported by Xvnc.
-
+.
 .TP
 .B \-get \fIXvnc-param\fP
 Prints the current value of the given Xvnc parameter.
-
+.
 .TP
 .B \-desc \fIXvnc-param\fP
 Prints a short description of the given Xvnc parameter.
@@ -102,11 +102,11 @@
 .TP
 .B \-display \fIXdisplay\fP
 Specifies the Xvnc server to control.
-
+.
 .TP
 .B \-nowin
 When run as a "helper" app, don't put up a window.
-
+.
 .TP
 .B \-iconic
 When run as a "helper" app, make the window iconified at startup.
diff --git a/unix/vncserver.man b/unix/vncserver.man
index 649d2c4..04a060e 100644
--- a/unix/vncserver.man
+++ b/unix/vncserver.man
@@ -56,24 +56,24 @@
 change it with this option.  The desktop name option is passed to the xstartup
 script via the $VNCDESKTOP environment variable, which allows you to run a
 different set of applications depending on the name of the desktop.
-
+.
 .TP
 .B \-geometry \fIwidth\fPx\fIheight\fP
 Specify the size of the VNC desktop to be created. Default is 1024x768. 
-
+.
 .TP
 .B \-depth \fIdepth\fP
 Specify the pixel depth (in bits) of the VNC desktop to be created. Default is
 24.  Other possible values are 8, 15 and 16 - anything else is likely to cause
 strange behaviour by applications.
-
+.
 .TP
 .B \-pixelformat \fIformat\fP
 Specify pixel format for Xvnc to use (BGRnnn or RGBnnn).  The default for
 depth 8 is BGR233 (meaning the most significant two bits represent blue, the
 next three green, and the least significant three represent red), the default
 for depth 16 is RGB565, and the default for depth 24 is RGB888.
-
+.
 .TP
 .B \-cc 3
 As an alternative to the default TrueColor visual, this allows you to run an
@@ -82,7 +82,7 @@
 work on such a display.  Values other than 3 (PseudoColor) and 4 (TrueColor)
 for the \-cc option may result in strange behaviour, and PseudoColor desktops
 must have an 8-bit depth.
-
+.
 .TP
 .B \-kill :\fIdisplay#\fP
 This kills a VNC desktop previously started with vncserver.  It does this by
@@ -92,7 +92,7 @@
 option ignores anything preceding the first colon (":") in the display
 argument.  Thus, you can invoke "vncserver \-kill $DISPLAY", for example at the
 end of your xstartup file after a particular application exits.
-
+.
 .TP
 .B \-fp \fIfont-path\fP
 If the vncserver script detects that the X Font Server (XFS) is running, it
@@ -108,20 +108,20 @@
 .B \-fp
 argument allows you to override the above fallback logic and specify a font
 path for Xvnc to use.
-
+.
 .TP
 .B \-fg
 Runs Xvnc as a foreground process.  This has two effects: (1) The VNC server
 can be aborted with CTRL-C, and (2) the VNC server will exit as soon as the
 user logs out of the window manager in the VNC session.  This may be necessary
 when launching TigerVNC from within certain grid computing environments.
-
+.
 .TP
 .B \-autokill
 Automatically kill Xvnc whenever the xstartup script exits.  In most cases,
 this has the effect of terminating Xvnc when the user logs out of the window
 manager.
-
+.
 .TP
 .B \-list
 Lists all VNC desktops started by vncserver.
diff --git a/unix/x0vncserver/x0vncserver.man b/unix/x0vncserver/x0vncserver.man
index 265c4ce..50bb9fb 100644
--- a/unix/x0vncserver/x0vncserver.man
+++ b/unix/x0vncserver/x0vncserver.man
@@ -16,6 +16,7 @@
 XDamage will be used if the existing X server supports it. Otherwise
 .B x0vncserver
 will fall back to polling the screen for changes.
+
 .SH OPTIONS
 .B x0vncserver
 interprets the command line as a list of parameters with optional values.
@@ -25,13 +26,16 @@
 .PP
 There are several forms of specifying parameters in the command line (here we
 use `\fISomeParameter\fP' as an example parameter name):
+
 .TP
 .B -\fISomeParameter\fP
 Enable the parameter, turn the feature on.  This form can be used with
 parameters that simply enable or disable some feature.
+.
 .TP
 .B -\fISomeParameter\fP=0
 Disable the parameter, turn the feature off.
+.
 .TP
 .B -\fISomeParameter\fP=\fIvalue\fP
 Assign the specified \fIvalue\fP to the parameter.  The leading dash can be
@@ -39,15 +43,19 @@
 .PP
 Parameter names are case-insensitive, their order in the command line can be
 arbitrary.
+
 .SH PARAMETERS
+
 .TP
 .B display
 The X display name.  If not specified, it defaults to the value of the
 DISPLAY environment variable.
+.
 .TP
 .B rfbport
 TCP port to listen for incoming VNC connections (RFB protocol).  The default
 port is 5900.
+.
 .TP
 .B Log
 Specifies which log output should be directed to which target logger, and the
@@ -55,6 +63,7 @@
 Default is \fB*:stderr:30\fP (log everything to stderr, set log level to 30).
 Log level should be a value between 0 and 100, higher levels produce more
 output.
+.
 .TP
 .B HostsFile
 This parameter allows to specify a file name with IP access control rules.
@@ -67,84 +76,103 @@
 \fINetmask\fP is optional and can be specified either in dotted format
 (e.g. /255.255.255.0), or as a single number of bits (e.g. /24).  Default is
 to accept connections from any IP address.
+.
 .TP
 .B SecurityTypes
 Specify which security scheme to use for incoming connections.  Valid values
 are a comma separated list of \fBNone\fP, \fBVncAuth\fP, \fBPlain\fP,
 \fBTLSNone\fP, \fBTLSVnc\fP, \fBTLSPlain\fP, \fBX509None\fP, \fBX509Vnc\fP
 and \fBX509Plain\fP. Default is \fBVncAuth,TLSVnc\fP.
+.
 .TP
 .B rfbauth, PasswordFile
 Password file for VNC authentication.  There is no default, you should
 specify the password file explicitly.  Password file should be created with
 the \fBvncpasswd\fP(1) utility.
+.
 .TP
 .B Password
 Obfuscated binary encoding of the password which clients must supply to
 access the server.  Using this parameter is insecure, use \fBPasswordFile\fP
 parameter instead.
+.
 .TP
 .B PlainUsers
 A comma separated list of user names that are allowed to authenticate via
 any of the "Plain" security types (Plain, TLSPlain, etc.). Specify \fB*\fP
 to allow any user to authenticate using this security type. Default is to
 deny all users.
+.
 .TP
 .B pam_service
 PAM service name to use when authentication users using any of the "Plain"
 security types. Default is \fBvnc\fP.
+.
 .TP
 .B x509cert
 Path to a X509 certificate in PEM format to be used for all X509 based
 security types (X509None, X509Vnc, etc.).
+.
 .TP
 .B x509key
 Private key counter part to the certificate given in \fBx509cert\fP. Must
 also be in PEM format.
+.
 .TP
 .B BlacklistThreshold
 The number of unauthenticated connection attempts allowed from any individual
 host before that host is black-listed.  Default is 5.
+.
 .TP
 .B BlacklistTimeout
 The initial timeout applied when a host is first black-listed.  The host
 cannot re-attempt a connection until the timeout expires.  Default is 10.
+.
 .TP
 .B QueryConnect
 Prompt the local user to accept or reject incoming connections.  Default is
 off.
+.
 .TP
 .B QueryConnectTimeout
 Number of seconds to show the Accept Connection dialog before rejecting the
 connection.  Default is 10.
+.
 .TP
 .B AlwaysShared
 Always treat incoming connections as shared, regardless of the
 client-specified setting.  Default is off.
+.
 .TP
 .B NeverShared
 Never treat incoming connections as shared, regardless of the
 client-specified setting.  Default is off.
+.
 .TP
 .B DisconnectClients
 Disconnect existing clients if an incoming connection is non-shared.  If
 combined with \fBNeverShared\fP then new connections will be refused while
 there is a client active.  Default is on.
+.
 .TP
 .B AcceptKeyEvents
 Accept key press and release events from clients.  Default is on.
+.
 .TP
 .B AcceptPointerEvents
 Accept pointer events from clients.  Default is on.
+.
 .TP
 .B RemapKeys
 Comma-separated list of incoming keysyms to remap.  Mappings are expressed as
 two hex values, prefixed by \fB0x\fP, and separated by \fB->\fP (`dash' and
 `greater than' characters).
+.
 .TP
 .B Protocol3.3
 Always use RFB protocol version 3.3 for backwards compatibility with
 badly-behaved clients.  Default is off.
+.
 .TP
 .B Geometry
 This option specifies the screen area that will be shown to VNC clients.  The
@@ -154,14 +182,17 @@
 right and/or from the bottom of the screen.  Offsets are optional, +0+0 is
 assumed by default (top left corner).  If the argument is empty, full screen
 is shown to VNC clients (this is the default).
+.
 .TP
 .B MaxProcessorUsage
 Maximum percentage of CPU time to be consumed when polling the
 screen.  Default is 35.
+.
 .TP
 .B PollingCycle
 Milliseconds per one polling cycle.  Actual interval may be dynamically
 adjusted to satisfy \fBMaxProcessorUsage\fP setting.  Default is 30.
+.
 .TP
 .B VideoArea
 This option specifies the screen area that will be handled as video.  The
@@ -177,6 +208,7 @@
 clients may choose video selection themselves, but if they do not, then the
 \fBVideoArea\fP parameter will take effect.  If the argument is empty, no
 video area is set (this is the default).
+.
 .TP
 .B DeferUpdate
 x0vncserver uses a "deferred update" mechanism which enhances performance in
@@ -186,55 +218,67 @@
 single update. Setting it to 0 results in the same behaviour as earlier
 versions of x0vncserver, where the first change to the framebuffer causes an
 immediate update to any waiting clients.
+.
 .TP
 .B AlwaysSetDeferUpdateTimer
 Keep delaying sending the screen update to the client(s) each time the
 screen is updated. Otherwise the delay is from the first update. Default
 is off.
+.
 .TP
 .B CompareFB
 Perform pixel comparison on framebuffer to reduce unnecessary updates. Can
 be either \fB0\fP (off), \fB1\fP (always) or \fB2\fP (auto). Default is
 \fB2\fP.
+.
 .TP
 .B UseSHM
 Use MIT-SHM extension if available.  Using that extension accelerates reading
 the screen.  Default is on.
+.
 .TP
 .B OverlayMode
 Use overlay mode in IRIX or Solaris (does not have effect in other systems).
 This enables system-specific access to complete full-color version of the
 screen (the default X visual often provides 256 colors).  Also, in overlay
 mode, \fBx0vncserver\fP can show correct mouse cursor.  Default is on.
+.
 .TP
 .B ZlibLevel
 Zlib compression level for ZRLE encoding (it does not affect Tight encoding).
 Acceptable values are between 0 and 9.  Default is to use the standard
 compression level provided by the \fBzlib\fP(3) compression library.
+.
 .TP
 .B ImprovedHextile
 Use improved compression algorithm for Hextile encoding which achieves better
 compression ratios by the cost of using slightly more CPU time.  Default is
 on.
+.
 .TP
 .B IdleTimeout
 The number of seconds after which an idle VNC connection will be dropped
 (zero means no timeout).  Default is 0.
+.
 .TP
 .B MaxDisconnectionTime
 Terminate when no client has been connected for \fIN\fP seconds.  Default is
 0.
+.
 .TP
 .B MaxConnectionTime
 Terminate when a client has been connected for \fIN\fP seconds.  Default is
 0.
+.
 .TP
 .B MaxIdleTime
 Terminate after \fIN\fP seconds of user inactivity.  Default is 0.
+.
 .TP
 .B ClientWaitTimeMillis
 The number of milliseconds to wait for a client which is no longer
 responding.  Default is 20000.
+.
 .TP
 .B AcceptCutText
 .TQ
@@ -242,11 +286,13 @@
 .TQ
 .B MaxCutText
 Currently unused.
+
 .SH SEE ALSO
 .BR Xvnc (1),
 .BR vncpasswd (1),
 .br
 http://www.tigervnc.org/
+
 .SH AUTHOR
 Constantin Kaplinsky and others.
 
diff --git a/unix/xserver/hw/vnc/Xvnc.man b/unix/xserver/hw/vnc/Xvnc.man
index ea61c6b..5870ebb 100644
--- a/unix/xserver/hw/vnc/Xvnc.man
+++ b/unix/xserver/hw/vnc/Xvnc.man
@@ -33,29 +33,29 @@
 .TP
 .B \-geometry \fIwidth\fPx\fIheight\fP
 Specify the size of the desktop to be created. Default is 1024x768.
-
+.
 .TP
 .B \-depth \fIdepth\fP
 Specify the pixel depth in bits of the desktop to be created. Default is 24,
 other possible values are 8, 15, and 16 - anything else is likely to cause
 strange behaviour by applications.
-
+.
 .TP
 .B \-pixelformat \fIformat\fP
 Specify pixel format for server to use (BGRnnn or RGBnnn).  The default for
 depth 8 is BGR233 (meaning the most significant two bits represent blue, the
 next three green, and the least significant three represent red), the default
 for depth 16 is RGB565 and for depth 24 is RGB888.
-
+.
 .TP
 .B \-interface \fIIP address\fP or \-i \fIIP address\fP
 Listen on interface. By default Xvnc listens on all available interfaces.
-
+.
 .TP
 .B \-inetd 
 This significantly changes Xvnc's behaviour so that it can be launched from
 inetd.  See the section below on usage with inetd.
-
+.
 .TP
 .B \-help
 List all the options and parameters
@@ -75,13 +75,13 @@
 .B \-desktop \fIdesktop-name\fP
 Each desktop has a name which may be displayed by the viewer. It defaults to
 "x11".
-
+.
 .TP
 .B \-rfbport \fIport\fP
 Specifies the TCP port on which Xvnc listens for connections from viewers (the
 protocol used in VNC is called RFB - "remote framebuffer").  The default is
 5900 plus the display number.
-
+.
 .TP
 .B \-rfbwait \fItime\fP, \-ClientWaitTimeMillis \fItime\fP
 
@@ -89,7 +89,7 @@
 necessary because Xvnc is single-threaded and sometimes blocks until the viewer
 has finished sending or receiving a message - note that this does not mean an
 update will be aborted after this time.  Default is 20000 (20 seconds).
-
+.
 .TP
 .B \-httpd \fIdirectory\fP
 Run a mini-HTTP server which serves files from the given directory.  Normally
@@ -97,18 +97,18 @@
 with a .vnc extension will have certain substitutions made so that a single
 installation of the Java VNC viewer can be served by separate instances of
 Xvnc.
-
+.
 .TP
 .B \-httpPort \fIport\fP
 Specifies the port on which the mini-HTTP server runs.  Default is 5800 plus
 the display number.
-
+.
 .TP
 .B \-rfbauth \fIpasswd-file\fP, \-PasswordFile \fIpasswd-file\fP
 Specifies the file containing the password used to authenticate viewers.  The
 file is accessed each time a connection comes in, so it can be changed on the
 fly via \fBvncpasswd\fP(1).
-
+.
 .TP
 .B \-DeferUpdate \fItime\fP
 Xvnc uses a "deferred update" mechanism which enhances performance in many
@@ -118,139 +118,139 @@
 update. Setting it to 0 results in the same behaviour as earlier versions of
 Xvnc, where the first change to the framebuffer causes an immediate update to
 any waiting clients.
-
+.
 .TP
 .B \-AlwaysSetDeferUpdateTimer
 Keep delaying sending the screen update to the client(s) each time the
 screen is updated. Otherwise the delay is from the first update. Default
 is off.
-
+.
 .TP
 .B \-SendCutText
 Send clipboard changes to clients (default is on).  Note that you must also run
 \fBvncconfig\fP(1) to get the clipboard to work.
-
+.
 .TP
 .B \-AcceptCutText
 Accept clipboard updates from clients (default is on).  Note that you must also
 run \fBvncconfig\fP(1) to get the clipboard to work.
-
+.
 .TP
 .B \-MaxCutText \fIbytes\fP
 The maximum size of a clipboard update that will be accepted from a client.
 Default is \fB262144\fP.
-
+.
 .TP
 .B \-AcceptPointerEvents
 Accept pointer press and release events from clients (default is on).
-
+.
 .TP
 .B \-AcceptKeyEvents
 Accept key press and release events from clients (default is on).
-
+.
 .TP
 .B \-DisconnectClients
 Disconnect existing clients if an incoming connection is non-shared (default is
 on). If \fBDisconnectClients\fP is false, then a new non-shared connection will
 be refused while there is a client active.  When combined with
 \fBNeverShared\fP this means only one client is allowed at a time.
-
+.
 .TP
 .B \-NeverShared
 Never treat incoming connections as shared, regardless of the client-specified
 setting (default is off).
-
+.
 .TP
 .B \-AlwaysShared
 Always treat incoming connections as shared, regardless of the client-specified
 setting (default is off).
-
+.
 .TP
 .B \-Protocol3.3
 Always use protocol version 3.3 for backwards compatibility with badly-behaved
 clients (default is off).
-
+.
 .TP
 .B \-CompareFB
 Perform pixel comparison on framebuffer to reduce unnecessary updates (default
 is on).
-
+.
 .TP
 .B \-ZlibLevel
 Zlib compression level for ZRLE encoding (it does not affect Tight encoding).
 Acceptable values are between 0 and 9.  Default is to use the standard
 compression level provided by the \fBzlib\fP(3) compression library.
-
+.
 .TP
 .B \-ImprovedHextile
 Use improved compression algorithm for Hextile encoding which achieves better
 compression ratios by the cost of using slightly more CPU time.  Default is
 on.
-
+.
 .TP
 .B \-SecurityTypes \fIsec-types\fP
 Specify which security scheme to use for incoming connections.  Valid values
 are a comma separated list of \fBNone\fP, \fBVncAuth\fP, \fBPlain\fP,
 \fBTLSNone\fP, \fBTLSVnc\fP, \fBTLSPlain\fP, \fBX509None\fP, \fBX509Vnc\fP
 and \fBX509Plain\fP. Default is \fBVncAuth,TLSVnc\fP.
-
+.
 .TP
 .B \-Password \fIpassword\fP
 Obfuscated binary encoding of the password which clients must supply to
 access the server.  Using this parameter is insecure, use \fBPasswordFile\fP
 parameter instead.
-
+.
 .TP
 .B \-PlainUsers \fIuser-list\fP
 A comma separated list of user names that are allowed to authenticate via
 any of the "Plain" security types (Plain, TLSPlain, etc.). Specify \fB*\fP
 to allow any user to authenticate using this security type. Default is to
 deny all users.
-
+.
 .TP
 .B \-pam_service \fIname\fP
 PAM service name to use when authentication users using any of the "Plain"
 security types. Default is \fBvnc\fP.
-
+.
 .TP
 .B \-x509cert \fIpath\fP
 Path to a X509 certificate in PEM format to be used for all X509 based
 security types (X509None, X509Vnc, etc.).
-
+.
 .TP
 .B \-x509key \fIpath\fP
 Private key counter part to the certificate given in \fBx509cert\fP. Must
 also be in PEM format.
-
+.
 .TP
 .B \-BlacklistThreshold \fIcount\fP
 The number of unauthenticated connection attempts allowed from any individual
 host before that host is black-listed.  Default is 5.
-
+.
 .TP
 .B \-BlacklistTimeout \fIseconds\fP
 The initial timeout applied when a host is first black-listed.  The host
 cannot re-attempt a connection until the timeout expires.  Default is 10.
-
+.
 .TP
 .B \-IdleTimeout \fIseconds\fP
 The number of seconds after which an idle VNC connection will be dropped
 (default is 0, which means that idle connections will never be dropped).
-
+.
 .TP
 .B \-MaxDisconnectionTime \fIseconds\fP
 Terminate when no client has been connected for \fIN\fP seconds.  Default is
 0.
-
+.
 .TP
 .B \-MaxConnectionTime \fIseconds\fP
 Terminate when a client has been connected for \fIN\fP seconds.  Default is
 0.
-
+.
 .TP
 .B \-MaxIdleTime \fIseconds\fP
 Terminate after \fIN\fP seconds of user inactivity.  Default is 0.
-
+.
 .TP
 .B \-QueryConnect
 Prompts the user of the desktop to explicitly accept or reject incoming
@@ -261,17 +261,17 @@
 QueryConnect to be supported by the \fBvnc.so\fP(1) module or
 \fBXvnc\fP(1) program.  The \fBx0vncserver\fP(1) program does not require
 \fBvncconfig\fP(1) to be running.
-
+.
 .TP
 .B \-QueryConnectTimeout \fIseconds\fP
 Number of seconds to show the Accept Connection dialog before rejecting the
 connection.  Default is \fB10\fP.
-
+.
 .TP
 .B \-localhost
 Only allow connections from the same machine. Useful if you use SSH and want to
 stop non-SSH connections from any other hosts.
-
+.
 .TP
 .B \-Log \fIlogname\fP:\fIdest\fP:\fIlevel\fP
 Configures the debug log settings.  \fIdest\fP can currently be \fBstderr\fP or
@@ -279,7 +279,7 @@
 output.  \fIlogname\fP is usually \fB*\fP meaning all, but you can target a
 specific source file if you know the name of its "LogWriter".  Default is
 \fB*:stderr:30\fP.
-
+.
 .TP
 .B \-RemapKeys \fImapping
 Sets up a keyboard mapping.
@@ -293,7 +293,7 @@
 is a hexadecimal keysym. For example, to exchange the " and @ symbols you would specify the following:
 .IP "" 10
 RemapKeys=0x22<>0x40
-
+.
 .TP
 .B \-AvoidShiftNumLock
 Key affected by NumLock often require a fake Shift to be inserted in order