diff --git a/misc/terminfo.src b/misc/terminfo.src
index 92a8d69..e5d1687 100644
--- a/misc/terminfo.src
+++ b/misc/terminfo.src
@@ -6,8 +6,8 @@
 # Report bugs and new terminal descriptions to
 #	bug-ncurses@gnu.org
 #
-#	$Revision: 1.341 $
-#	$Date: 2008/10/12 23:03:54 $
+#	$Revision: 1.549 $
+#	$Date: 2015/07/25 19:27:20 $
 #
 # The original header is preserved below for reference.  It is noted that there
 # is a "newer" version which differs in some cosmetic details (but actually
@@ -321,7 +321,7 @@
 # DEL and ^C are hardcoded to act as kill characters.
 # ^D acts as a line break (just like newline).
 # It also interprets
-#      \033];xxx\007 
+#      \033];xxx\007
 # for compatibility with xterm -TD
 9term|Plan9 terminal emulator for X,
 	am,
@@ -340,7 +340,7 @@
 	cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
 	cuu=\E[%p1%dA, use=ansi+local1,
 ansi+tabs,
-	cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
+	cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
 ansi+inittabs,
 	it#8, use=ansi+tabs,
 ansi+erase,
@@ -376,11 +376,19 @@
 	dim=\E[2m,
 	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
 	use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
-ansi+pp|ansi printer port,
-	mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
 ansi+csr|ansi scroll-region plus cursor save & restore,
 	csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
 
+# The normal (ANSI) flavor of "media copy" building block asserts that
+# characters sent to the printer do not echo on the screen. DEC terminals
+# can also be put into autoprinter mode, where each line is sent to the
+# printer as you move off that line, e.g., by a carriage return.
+ansi+pp|ansi printer port,
+	mc5i,
+	mc0=\E[i, mc4=\E[4i, mc5=\E[5i,
+dec+pp|DEC autoprinter mode,
+	mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
+
 # The IBM PC alternate character set.  Plug this into any Intel console entry.
 # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
 # ROM graphics for control characters such as the diamond, up- and down-arrow.
@@ -452,12 +460,14 @@
 # For more detail on this rather pathetic standard, see the comments
 # near the end of this file.
 ibcs2|Intel Binary Compatibility Standard prescriptions,
-	cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
-	cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+	cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D,
+	cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
 	dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
-	hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
-	indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
-	smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
+	hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+	il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT,
+	rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g,
+	vpa=\E[%i%p1%dd,
 
 #### ANSI/ECMA-48 terminals and terminal emulators
 #
@@ -487,7 +497,7 @@
 # ansi-mtabs adds relative addressing and minimal tab support
 ansi-mtabs|any ansi terminal with pessimistic assumptions,
 	it#8,
-	ht=^I, use=ansi+local1, use=ansi-mini,
+	ht=^I, use=ansi-mini, use=ansi+local1,
 
 # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
 #
@@ -545,7 +555,7 @@
 	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
 	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
 	hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
-	kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
+	kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
 	use=klone+sgr-dumb,
 pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
 	lines#25, use=pcansi-m,
@@ -576,7 +586,7 @@
 	kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
 	kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
 	rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
-	s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
+	s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
 	vpa=\E[%i%p1%dd, use=pcansi-m,
 
 ansi+enq|ncurses extension for ANSI ENQ,
@@ -617,11 +627,45 @@
 	clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
 	is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
-	khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
+	khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
 	rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
 	u7=\E[6n, use=klone+color, use=klone+sgr8,
+
+# Keypad:	Home=\0G	Up=\0H	PrPag=\0I
+#		ka1,kh		kcuu1		kpp,ka3
+#
+#		Left=\0K	5=\0L		Right=\0M
+#		kcub1		kb2		kcuf1
+#
+#		End=\0O		Down=\0P	NxPag=\0Q
+#		kc1,kend	kcud1		kc3,knp
+#
+#		Ins=\0R		Del=\0S
+#		kich1		kdch1
+#
+# On keyboard with 12 function keys,
+#	shifted f-keys: F13-F24
+#	control f-keys: F25-F36
+#	alt f-keys:     F37-F48
+# The shift/control/alt keys do not modify each other, but alt overrides both,
+# and control overrides shift.
+#
+# <pfkey> capability for F1-F48 -TD
 ansi.sys|ANSI.SYS 3.1 and later versions,
-	el=\E[K, use=ansi.sys-old,
+	el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
+	kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
+	kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
+	kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
+	kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
+	kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
+	kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
+	kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
+	kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
+	kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
+	kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
+	kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
+	pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<%t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t%'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p,
+	use=ansi.sys-old,
 
 #
 # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
@@ -654,8 +698,841 @@
 	is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
 	use=ansi.sysk,
 
-#### ANSI console types
+#### Atari ST terminals
+
+# From Guido Flohr <gufl0000@stud.uni-sb.de>.
 #
+tw52|tw52-color|Toswin window manager with color,
+	bce,
+	colors#16, pairs#256,
+	oc=\Eb?\Ec0, op=\Eb?\Ec0,
+	setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+	setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+	setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+	setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+	use=tw52-m,
+tw52-m|Toswin window manager monochrome,
+	ul,
+	ma#999,
+	bold=\Eya, dch1=\Ea, dim=\EyB,
+	is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
+	rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
+	smso=\EyQ, smul=\EyH, use=at-m,
+tt52|Atari TT medium and high resolution,
+	lines#30, use=at-color,
+st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
+	bce,
+	colors#16, pairs#256,
+	is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
+	setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+	setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+	setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+	setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+	use=st52,
+st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
+	am, eo, mir, npc,
+	cols#80, it#8, lines#24,
+	bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
+	cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+	cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
+	il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
+	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
+	kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
+	kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
+	kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
+	kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
+	kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
+	rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
+tw100|toswin vt100 window mgr,
+	eo, mir, msgr, xon,
+	colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
+	acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
+	clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
+	cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
+	dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
+	hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
+	kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
+	kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
+	kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
+	kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
+	knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
+	oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
+	rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
+	rmso=\E[m, rmul=\E[m,
+	rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
+	sc=\E7,
+	setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
+	setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
+	sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
+	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+# The entries for stv52 and stv52pc probably need a revision.
+stv52|MiNT virtual console,
+	am, msgr,
+	cols#80, it#8, lines#30,
+	bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
+	cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
+	dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+	ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+	kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
+	kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
+	kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
+	kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
+	kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
+	op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
+	rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
+	smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
+stv52pc|MiNT virtual console with PC charset,
+	am, msgr,
+	cols#80, it#8, lines#30,
+	acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371,
+	bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
+	cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
+	dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+	ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+	kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
+	kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
+	kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
+	kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
+	kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
+	rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
+	rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
+	smso=\Ep, smul=\EyH,
+
+# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
+atari-old|atari st,
+	OTbs, am,
+	cols#80, it#8, lines#25,
+	clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
+	ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
+	kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
+# UniTerm terminal program for the Atari ST:  49-line VT220 emulation mode
+# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
+uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
+	lines#49,
+	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
+	use=vt220,
+# MiNT VT52 emulation. 80 columns, 25 rows.
+# MiNT is Now TOS, the operating system which comes with all Ataris now
+# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
+# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
+# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
+st52-old|Atari ST with VT52 emulation,
+	am, km,
+	cols#80, lines#25,
+	bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
+	cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+	cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+	ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
+	kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
+	kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
+	kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
+	kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
+	ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
+	smcup=\Ee, smso=\Ep,
+
+#### Apple Terminal.app
+
+# nsterm*|Apple_Terminal - AppKit Terminal.app
+#
+# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
+# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
+# Server and Mac OS X operating systems. There is also a
+# "terminal.app" in GNUStep, but I believe it to be an unrelated
+# codebase and I have not attempted to describe it here.
+#
+# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
+# are pretty much on your own. Use "nsterm-7-m" and hope for the best.
+# You might also try "nsterm-7" and "nsterm-old" if you suspect your
+# version supports color.
+#
+# To determine the version of Terminal.app you're using by running:
+#
+#     echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
+#
+# For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce")
+#
+# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
+#
+# For Apple_Terminal v71+/v100+, use "nsterm-bce".
+#
+# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
+#
+# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
+#
+# For all earlier versions (Apple_Terminal), try "nsterm-7-m"
+# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
+# might work too, but really you're on your own here since these
+# systems are very obsolete and I can't test them. I do welcome
+# patches, though :).
+
+# Other Terminals:
+#
+# For GNUstep_Terminal, you're probably best off using "linux" or
+# writing your own terminfo.
+
+# For MacTelnet, you're on your own. It's a different codebase, and
+# seems to be somewhere between "vt102", "ncsa" and "xterm-color".
+
+# For iTerm.app, see "iterm".
+
+#
+# The AppKit Terminal.app descriptions all have names beginning with
+# "nsterm". Note that the statusline (-s) versions use the window
+# titlebar as a phony status line, and may produce warnings during
+# compilation as a result ("tsl uses 0 parameters, expected 1".)
+# Ignore these warnings, or even ignore these entries entirely. Apps
+# which need to position the cursor or do other fancy stuff inside the
+# status line won't work with these entries. They're primarily useful
+# for programs like Pine which provide simple notifications in the
+# status line. Please note that non-ASCII characters don't work right
+# in the status line, since Terminal.app incorrectly interprets their
+# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
+# versions) or only accepts status lines consisting entirely of
+# characters from the first 256 Unicode positions (including C1 but
+# not C0 or DEL.)
+#
+# The Mythology* of AppKit Terminal.app:
+#
+# In the days of NeXTSTep 0.x and 1.x there were two incompatible
+# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
+# shareware replacement for Terminal called "Stuart" which NeXT bought
+# and used as the basis for the Terminal.app in NeXTstep 2+,
+# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
+# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
+# capabilities for the early versions, but I believe that the
+# TERM_PROGRAM_VERSION may have been reset at some point.
+#
+# The early versions were tailored to the NeXT character set. Sometime
+# after the Apple aquisition the encoding was swiched to MacRoman
+# (initally with serious altcharset bugs due to incomplete conversion
+# of the old NeXT code,) and then later to UTF-8. Alos sometime during
+# or just prior to the early days of Mac OS X, the Terminal grew ANSI
+# 8-color support (initially buggy when combined with attributes, but
+# that was later fixed.) More recently, around Mac OS X version 10.3
+# or so (Terminal.app v100+) xterm-like 16-color support was added. In
+# some versions (for instance 133-1 which shipped with Mac OS X
+# version 10.4) this suffered from the <bce> bug, but that seems to
+# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
+#
+# In the early days of Mac OS X the terminal was fairly buggy and
+# would routinely crash under load. Many of these bugs seem to have
+# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
+# some may still remain. This change seems to correspond to
+# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
+# it did previously.
+#
+# * This may correspond with what actually happened, but I don't
+#   know. It is based on guesswork, hearsay, private correspondence,
+#   my faulty memory, and the following online sources and references:
+#
+# [1] "Three Scotts and a Duane" by Simson L. Garfinkel
+# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
+#
+# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
+# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
+#
+# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
+#   "nsterm" to comply with the name length and case conventions and
+#   limitations of various software packages [notably Solaris terminfo
+#   and UNIX.] A single Apple_Terminal alias is retained for
+#   backwards-compatbility.
+#
+# * Added function key support (F1-F4). These only work in Terminal.app
+#   version 51, hopefully the capabilities won't cause problems for people
+#   using version 41.
+#
+# * Added "full color" (-c) entries which support the 16-color mode in
+#   version 51.
+#
+# * By default, version 51 uses UTF-8 encoding with broken altcharset
+#   support, so "ASCII" (-7) entries without altcharset support were
+#   added.
+
+# nsterm - AppKit Terminal.app
+#
+# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
+# Terminal.app. It is a partial VT100 emulation with some xterm-like
+# extensions. This terminfo was written to describe versions 41
+# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
+# version 10.1) of Terminal.app.
+#
+# Terminal.app runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems.)  On the Mac OS X machine I
+# use, the executable for Terminal.app is:
+# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
+#
+# If you're looking for a description of the full-screen system
+# console which runs under Apple's Darwin operating system on PowerPC
+# platforms, see the "xnuppc" entry instead.
+#
+# There were no function keys in version 41. In version 51, there are
+# four working function keys (F1, F2, F3 and F4.) The function keys
+# are included in all of these entries.
+#
+# It does not support mouse pointer position reporting. Under some
+# circumstances the cursor can be positioned using option-click; this
+# works by comparing the cursor position and the selected position,
+# and simulating enough cursor-key presses to move the cursor to the
+# selected position. This technique fails in all but the simplest
+# applications.
+#
+# It provides partial ANSI color support (background colors interacted
+# badly with bold in version 41, though, as reflected in :ncv:.) The
+# monochrome (-m) entries are useful if you've disabled color support
+# or use a monochrome monitor. The full color (-c) entries are useful
+# in version 51, which doesn't exhibit the background color bug. They
+# also enable an xterm-compatible 16-color mode.
+#
+# The configurable titlebar is set using xterm-compatible sequences;
+# it is used as a status bar in the statusline (-s) entries. Its width
+# depends on font sizes and window sizes, but 50 characters seems to
+# be the default for an 80x24 window.
+#
+# The MacRoman character encoding is used for some of the alternate
+# characters in the "MacRoman" entries; the "ASCII" (-7) entries
+# disable alternate character set support entirely, and the "VT100"
+# (-acs) entries rely instead on Terminal.app's own buggy VT100
+# graphics emulation, which seems to think the character encoding is
+# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
+# are useful in Terminal.app version 51, which supports UTF-8 and
+# other ASCII-compatible character encodings but does not correctly
+# implement VT100 graphics; once VT100 graphics are correctly
+# implemented in Terminal.app, the "VT100" (-acs) entries should be
+# usable in any ASCII-compatible character encoding [except perhaps
+# in UTF-8, where some experts argue for disallowing alternate
+# characters entirely.]
+#
+# Terminal.app reports "vt100" as the terminal type, but exports
+# several environment variables which may aid detection in a shell
+# profile (i.e. .profile or .login):
+#
+# TERM=vt100
+# TERM_PROGRAM=Apple_Terminal
+# TERM_PROGRAM_VERSION=41      # in Terminal.app version 41
+# TERM_PROGRAM_VERSION=51      # in Terminal.app version 51
+#
+# For example, the following Bourne shell script would detect the
+# correct terminal type:
+#
+# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
+# then
+#     export TERM
+#     if [ :"$TERM_PROGRAM_VERSION" = :41 ]
+#     then
+#         TERM="nsterm-old"
+#     else
+#         TERM="nsterm-c-7"
+#     fi
+# fi
+#
+# In a C shell derivative, this would be accomplished by:
+#
+# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
+#     if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
+#          if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
+#              setenv TERM "nsterm-old"
+#          else
+#              setenv TERM "nsterm-c-7"
+#          endif
+#     endif
+# endif
+
+# The '+' entries are building blocks
+nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
+	am, bw, msgr, xenl, xon,
+	cols#80, it#8, lines#24,
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+	el1=\E[1K, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
+	ind=^J, invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
+	rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m,
+	sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+	smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
+
+nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	enacs=\E(B\E)0, rmacs=^O,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+	sgr0=\E[m\017, smacs=^N, use=nsterm+7,
+
+nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
+	acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245,
+	enacs=\E(B\E)0, rmacs=^O,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+	sgr0=\E[m\017, smacs=^N, use=nsterm+7,
+
+# compare with xterm+sl-twm
+nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
+	wsl#50, use=xterm+sl-twm,
+
+nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
+	op=\E[0m, use=ibm+16color,
+
+nsterm+c41|AppKit Terminal.app v41 color support,
+	colors#8, ncv#37, pairs#64,
+	op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+# These are different combinations of the building blocks
+
+# ASCII charset (-7)
+nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
+	use=nsterm+7,
+
+nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
+	use=nsterm+s, use=nsterm+7,
+
+nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
+	use=nsterm+c41, use=nsterm+7,
+
+nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
+	use=nsterm+c, use=nsterm+7,
+
+nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
+	use=nsterm+s, use=nsterm+c41, use=nsterm+7,
+
+nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
+	use=nsterm+s, use=nsterm+c, use=nsterm+7,
+
+# VT100 alternate-charset (-acs)
+nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
+	use=nsterm+acs,
+
+nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
+	use=nsterm+s, use=nsterm+acs,
+
+nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
+	use=nsterm+c41, use=nsterm+acs,
+
+nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
+	use=nsterm+c, use=nsterm+acs,
+
+nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
+	use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
+
+nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
+	use=nsterm+s, use=nsterm+c, use=nsterm+acs,
+
+# MacRoman charset
+nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
+	use=nsterm+mac,
+
+nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
+	use=nsterm+s, use=nsterm+mac,
+
+nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
+	use=nsterm+c41, use=nsterm+mac,
+
+nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
+	use=nsterm+c, use=nsterm+mac,
+
+nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
+	use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
+
+nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
+	use=nsterm+s, use=nsterm+c, use=nsterm+mac,
+
+# In Mac OS X version 10.5 the format of the preferences has changed
+# and a new, more complex technique is needed, e.g.,
+#
+#       python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
+#       "NSUserDefaults");ud=NSUserDefaults.alloc();
+#       ud.init();prefs=ud.persistentDomainForName_(
+#       "com.apple.Terminal");prefs["Window Settings"][
+#       prefs["Default Window Settings"]]["TerminalType"
+#       ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
+#       "com.apple.Terminal")' nsterm-16color
+#
+# and it is still not settable from the preferences dialog. This is
+# tracked under rdar://problem/7365108 and rdar://problem/7365134
+# in Apple's bug reporter.
+#
+# In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog
+# defaults to xterm-color.  Alternative selections are ansi, dtterm, rxvt,
+# vt52, vt100, vt102 and xterm.
+nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
+	bw@, mir, npc,
+	civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
+	flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
+	ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+	kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
+	knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+	smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
+	kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs,
+
+# The versions of Terminal.app in Mac OS X version 10.3.x seem to have
+# the background color erase feature. The newer version 240.2 in Mac OS X
+# version 10.5 does not.
+#
+# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
+# and D P Schreber comparing to nsterm-c-s-acs.
+#
+# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
+# can be set in Terminal.app, e.g.,
+#
+#	defaults write com.apple.Terminal TermCapString nsterm-bce
+#
+# and that it is not set in Terminal's preferences dialog.
+#
+# Modified for OS X 10.8, omitting bw based on testing with tack -TD
+#
+# Notes:
+# * The terminal description matches the default settings.
+# * The keyboard is configurable via a dialog.
+# * By default khome, kend, knext and kprev are honored only with a
+#   shift-modifier.
+# * There are bindings for control left/right arrow (but not up/down).
+#   Added those to nsterm-16color, which is the version used for OS X 10.6
+# * "Allow VT100 application keypage mode" is by default disabled.
+#   There is no way to press keypad-comma unless application mode is enabled
+#   and used.
+# * 132-column mode stopped working during vttest's tests.  Consider it broken.
+# * CHT, REP, SU, SD are buggy.
+# * ECH works (also in Leopard), but is not used here for compatibility.
+# * The terminal preferences dialog replaces xterm-color by xterm-16color and
+#   xterm-256color.  However, it adds "nsterm", so it is possible to use the
+#   nsterm entry from this file to override the MacPorts (20110404) or
+#   system (20081102) copy of this file.
+# + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences
+#   dialog defaults to xterm-256color.  Alternative selections are ansi,
+#   dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color.  However,
+#   the menu says "Declare terminal as" without promising to actually emulate
+#   the corresponding terminals.  Indeed, changing TERM does not affect the
+#   emulation itself.  This means that
+#   + the function-keys do not match for dtterm for kf1-kf4 as well as
+#     khome/kend
+#   + the color model is the same for each setting of TERM (does not match
+#     ansi or dtterm).
+#   + the shift/control/meta key modifiers from rxvt and xterm variants are not
+#     recognised except for a few special cases, i.e., kRIT5 and kLFT5.
+#   + the vt52 emulation does not give a usable shell because screen-clearing
+#     does not work as expected.
+#   + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color".
+# + OSX 10.9 (Yosemite) added more extended keys in the default configuration
+#   as well as unmasking F10 (which had been used in the window manager). Those
+#   keys are listed in this entry.
+nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
+	bce, use=nsterm-16color,
+
+# This is tested with OS X 10.8 (Mountain Lion), 2012/08/11
+#	TERM_PROGRAM_VERSION=309
+# Earlier reports state that these differences also apply to OS X 10.7 (Lion),
+#	TERM_PROGRAM_VERSION=303
+nsterm-256color|Terminal.app in OS X 10.8,
+	use=xterm+256setaf, use=nsterm-bce,
+
+nsterm-build326|Terminal.app in OS X 10.9,
+	kDC=\E[3;2~, kLFT=\E[1;2D, kRIT=\E[1;2C, kcbt=\E[Z,
+	kf18=\E[32~, kDC5=\E[3;5~, kDC7=\E[3;5~, kLFT3=\Eb,
+	kLFT5=\E[1;5D, kRIT3=\Ef, kRIT5=\E[1;5C,
+	use=nsterm-256color,
+
+# actually "343.7"
+nsterm-build343|Terminal.app in OS X 10.10,
+	kend=\EOF, khome=\EOH, use=nsterm-build326,
+
+# This is an alias which should always point to the "current" version
+nsterm|Apple_Terminal|AppKit Terminal.app,
+	use=nsterm-build343,
+
+# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
+# more featureful) terminal emulator for Mac OS X. It is similar
+# enough in capabilities to nsterm-16color that I have derived this
+# description from that one, but as far as I know they share no code.
+# Many of the features are user-configurable, but I attempt only to
+# describe the default configuration.
+#
+# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
+# disabled.
+iTerm.app|iterm|iTerm.app terminal emulator for Mac OS X,
+	bce, bw@,
+	csr@, dim@, kend=\EOF, khome=\EOH,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+	use=xterm+256setaf, use=nsterm-16color,
+
+# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
+#
+# On PowerPC platforms, Apple's Darwin operating system uses a
+# full-screen system console derived from a NetBSD framebuffer
+# console. It is an ANSI-style terminal, and is not really VT-100
+# compatible.
+#
+# Under Mac OS X, this is the system console driver used while in
+# single-user mode [reachable by holding down Command-S during the
+# boot process] and when logged in using console mode [reachable by
+# typing ">console" at the graphical login prompt.]
+#
+# If you're looking for a description of the Terminal.app terminal
+# emulator which runs under the Mac OS X Quartz windowing system (and
+# other AppKit-supported windowing systems,) see the "nsterm"
+# entry instead.
+#
+# NOTE: Under Mac OS X version 10.1, the default login window does not
+# prompt for user name, instead requiring an icon to be selected from
+# a list of known users. Since the special ">console" login is not in
+# this list, you must make one of two changes in the Login Window
+# panel of the Login section of System Prefs to make the special
+# ">console" login accessible. The first option is to enable 'Show
+# "Other User" in list for network users', which will add a special
+# "Other..." icon to the graphical login panel. Selecting "Other..."
+# will present the regular graphical login prompt. The second option
+# is to change the 'Display Login Window as:' setting to 'Name and
+# password entry fields', which replaces the login panel with a
+# graphical login prompt.
+#
+# There are no function keys, at least not in Darwin 1.3.
+#
+# It has no mouse support.
+#
+# It has full ANSI color support, and color combines correctly with
+# all three supported attributes: bold, inverse-video and underline.
+# However, bold colored text is almost unreadable (bolding is
+# accomplished using shifting and or-ing, and looks smeared) so bold
+# has been excluded from the list of color-compatible attributes
+# [using (ncv)]. The monochrome entry (-m) is useful if you use a
+# monochrome monitor.
+#
+# There is one serious bug with this terminal emulation's color
+# support: repositioning the cursor onto a cell with non-matching
+# colors obliterates that cell's contents, replacing it with a blank
+# and displaying a colored cursor in the "current" colors. There is
+# no complete workaround at present [other than using the monochrome
+# (-m) entries,] but removing the (msgr) capability seemed to help.
+#
+# The "standout" chosen was simple reverse-video, although a colorful
+# standout might be more aesthetically pleasing. Similarly, the bold
+# chosen is the terminal's own smeared bold, although a simple
+# color-change might be more readable. The color-bold (-b) entries
+# uses magenta colored text for bolding instead. The fancy color (-f
+# and -f2) entries use color for bold, standout and underlined text
+# (underlined text is still underlined, though.)
+#
+# Apparently the terminal emulator does support a VT-100-style
+# alternate character set, but all the alternate character set
+# positions have been left blank in the font. For this reason, no
+# alternate character set capabilities have been included in this
+# description. The console driver appears to be ASCII-only, so (enacs)
+# has been excluded [although the VT-100 sequence does work.]
+#
+# The default Mac OS X and Darwin installation reports "vt100" as the
+# terminal type, and exports no helpful environment variables. To fix
+# this, change the "console" entry in /etc/ttys from "vt100" to
+# "xnuppc-WxH", where W and H are the character dimensions of your
+# console (see below.)
+#
+# The font used by the terminal emulator is apparently one originally
+# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
+# file includes descriptions for the following geometries:
+#
+#     Pixels        Characters   Entry Name (append -m for monochrome)
+#    -------------------------------------------------------------------
+#     640x400       80x25        xnuppc-80x25
+#     640x480       80x30        xnuppc-80x30
+#     720x480       90x30        xnuppc-90x30
+#     800x600       100x37       xnuppc-100x37
+#     896x600       112x37       xnuppc-112x37
+#     1024x640      128x40       xnuppc-128x40
+#     1024x768      128x48       xnuppc-128x48
+#     1152x768      144x48       xnuppc-144x48
+#     1280x1024     160x64       xnuppc-160x64
+#     1600x1024     200x64       xnuppc-200x64
+#     1600x1200     200x75       xnuppc-200x75
+#     2048x1536     256x96       xnuppc-256x96
+#
+# The basic "xnuppc" entry includes no size information, and the
+# emulator includes no reporting capability, so you'll be at the mercy
+# of the TTY device (which reports incorrectly on my hardware.) The
+# color-bold entries do not include size information.
+
+# The '+' entries are building blocks
+xnuppc+basic|Darwin PowerPC Console basic capabilities,
+	am, bce, mir, xenl,
+	it#8,
+	bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
+	el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
+	rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
+	rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
+	sc=\E7,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+	sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
+	smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
+
+xnuppc+c|Darwin PowerPC Console ANSI color support,
+	colors#8, ncv#32, pairs#64,
+	op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+
+xnuppc+b|Darwin PowerPC Console color-bold support,
+	ncv#32,
+	bold=\E[35m,
+	sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+	use=xnuppc+basic,
+
+xnuppc+f|Darwin PowerPC Console fancy color support,
+	ncv#35,
+	sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
+	smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
+
+xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
+	ncv#35,
+	bold=\E[33m,
+	sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
+	smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
+
+# Building blocks for specific screen sizes
+xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
+	cols#80, lines#25,
+
+xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
+	cols#80, lines#30,
+
+xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
+	cols#90, lines#30,
+
+xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
+	cols#100, lines#37,
+
+xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
+	cols#112, lines#37,
+
+xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
+	cols#128, lines#40,
+
+xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
+	cols#128, lines#48,
+
+xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
+	cols#144, lines#48,
+
+xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
+	cols#160, lines#64,
+
+xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
+	cols#200, lines#64,
+
+xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
+	cols#200, lines#75,
+
+xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
+	cols#256, lines#96,
+
+# These are different combinations of the building blocks
+
+xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
+	use=xnuppc+basic,
+
+xnuppc|darwin|Darwin PowerPC Console (color),
+	use=xnuppc+c, use=xnuppc+basic,
+
+xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
+	use=xnuppc+b,
+
+xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
+	use=xnuppc+b, use=xnuppc+c,
+
+xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
+	use=xnuppc+f,
+
+xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
+	use=xnuppc+f, use=xnuppc+c,
+
+xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
+	use=xnuppc+f2,
+
+xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
+	use=xnuppc+f2, use=xnuppc+c,
+
+# Combinations for specific screen sizes
+xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
+	use=xnuppc+80x25, use=xnuppc+basic,
+
+xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
+	use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
+
+xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
+	use=xnuppc+80x30, use=xnuppc+basic,
+
+xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
+	use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
+
+xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
+	use=xnuppc+90x30, use=xnuppc+basic,
+
+xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
+	use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
+
+xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
+	use=xnuppc+100x37, use=xnuppc+basic,
+
+xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
+	use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
+
+xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
+	use=xnuppc+112x37, use=xnuppc+basic,
+
+xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
+	use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
+
+xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
+	use=xnuppc+128x40, use=xnuppc+basic,
+
+xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
+	use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
+
+xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
+	use=xnuppc+128x48, use=xnuppc+basic,
+
+xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
+	use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
+
+xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
+	use=xnuppc+144x48, use=xnuppc+basic,
+
+xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
+	use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
+
+xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
+	use=xnuppc+160x64, use=xnuppc+basic,
+
+xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
+	use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
+
+xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
+	use=xnuppc+200x64, use=xnuppc+basic,
+
+xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
+	use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
+
+xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
+	use=xnuppc+200x75, use=xnuppc+basic,
+
+xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
+	use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
+
+xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
+	use=xnuppc+256x96, use=xnuppc+basic,
+
+xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
+	use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
+
 
 #### BeOS
 #
@@ -712,13 +1589,14 @@
 #
 linux-basic|linux console,
 	am, bce, eo, mir, msgr, xenl, xon,
-	it#8, ncv#18,
+	it#8, ncv#18, U8#1,
 	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
 	bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
-	cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
-	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
-	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
-	el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
+	el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
 	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
 	il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
 	kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
@@ -730,7 +1608,7 @@
 	khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
 	kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
 	rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
-	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,
 	smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
 	vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
 	use=ecma+color,
@@ -746,29 +1624,49 @@
 # 1.9.9.
 linux-c-nc|linux console with color-change,
 	ccc,
-	initc=\E]P%p1%x%p2%{256}%*%{1000}%/%02x%p3%{256}%*%{1000}%/%02x%p4%{256}%*%{1000}%/%02x,
+	initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
 	oc=\E]R, use=linux-basic,
 # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
 linux-c|linux console 1.3.6+ for older ncurses,
 	ccc,
-	initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{256}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
+	initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
 	oc=\E]R, use=linux-basic,
 
 # The 2.2.x kernels add a private mode that sets the cursor type; use that to
 # get a block cursor for cvvis.
 # reported by Frank Heckenbach <frank@g-n-u.de>.
-linux|linux console,
+linux2.2|linux 2.2.x console,
 	civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c,
 	cvvis=\E[?25h\E[?8c, use=linux-c-nc,
 
+# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here:
+#	http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html
+# Using SI/SO has the drawback that it confuses screen.  SCS would work.
+# However, SCS is buggy (see comment in Debian #515609) -TD
+# Further, this breaks longstanding workarounds for Linux console's line
+# drawing (see Debian 665959) -TD
+linux2.6|linux 2.6.x console,
+	rmacs=^O,
+	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;,
+	sgr0=\E[m\017, smacs=^N, use=linux2.2,
+
+# The 3.0 kernel adds support for clearing scrollback buffer (capability E3).
+# It is the same as xterm's erase-saved-lines feature.
+linux3.0|linux 3.0 kernels,
+	E3=\E[3J, use=linux2.6,
+
+# This is Linux console for ncurses.
+linux|linux console,
+	use=linux2.2,
+
 # Subject: linux 2.6.26 vt back_color_erase
 # Changes to the Linux console driver broke bce model as reported in
 #	https://bugzilla.novell.com/show_bug.cgi?id=418613
 # apparently from
 #	http://lkml.org/lkml/2008/4/26/305
-#	http://groups.google.com/group/fa.linux.kernel/browse_thread/thread/87f98338f0d636bb/aa96e8b86cee0d1e?lnk=st&q=#aa96e8b86cee0d1e
+#	http://lkml.org/lkml/2008/10/3/66
 linux2.6.26|linux console w/o bce,
-	bce@, use=linux,
+	bce@, use=linux2.6,
 
 # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
 linux-nic|linux with ich/ich1 suppressed for non-curses programs,
@@ -814,6 +1712,41 @@
 	initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,
 	use=linux,
 
+# 16-color linux console entry; this works with a 256-character
+# console font but bright background colors turn into dim ones when
+# you use a 512-character console font. This uses bold for bright
+# foreground colors and blink for bright background colors.
+linux-16color|linux console with 16 colors,
+	colors#16, ncv#63, pairs#256,
+	setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m,
+	setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m,
+	use=linux,
+
+# bterm (bogl 0.1.18)
+# Implementation is in bogl-term.c
+# Key capabilities from linux terminfo entry
+#
+# Notes:
+# bterm only supports acs using wide-characters, has case for these: qjxamlkut
+# bterm does not support sgr, since it only processes one parameter -TD
+bterm|bogl virtual terminal,
+	am, bce,
+	colors#8, cols#80, lines#24, pairs#64,
+	acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
+	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
+	cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
+	kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
+	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+	kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
+	kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+	kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+	kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
+	op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
+	rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+	sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
+
 #### Mach
 #
 
@@ -839,6 +1772,24 @@
 	dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
 	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
 
+# From: Samuel Thibault
+# Source: git://git.sv.gnu.org/hurd/gnumach.git
+# Files: i386/i386at/kd.c
+#
+# Added nel, hpa, sgr and removed rmacs, smacs based on source -TD
+mach-gnu|GNU Mach,
+	acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX,
+	el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@,
+	indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT,
+	sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m,
+	use=mach,
+
+mach-gnu-color|Mach Console with ANSI color,
+	colors#8, pairs#64,
+	op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm,
+	setaf=\E[3%p1%dm, use=mach-gnu,
+
 # From: Marcus Brinkmann
 # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
 #
@@ -867,9 +1818,9 @@
 #
 # Reading the source, RIS resets cnorm, but not xmous.
 hurd|The GNU Hurd console server,
-	am, bce, bw, eo, km, mir, msgr, xon,
+	am, bce, bw, eo, km, mir, msgr, xenl, xon,
 	colors#8, it#8, ncv#18, pairs#64,
-	acsc=++\,\,--..00ii``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
 	clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
 	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
@@ -896,382 +1847,6 @@
 	smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l,
 	gsbom=\E[>1h,
 
-#### OSF Unix
-#
-
-# OSF/1 1.1 Snapshot 2
-pmcons|pmconsole|PMAX console,
-	am,
-	cols#128, lines#57,
-	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
-	ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
-	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
-
-# SCO console and SOS-Syscons console for 386bsd
-# (scoansi: had unknown capabilities
-#	:Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
-#	:GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
-#	:G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
-#	:CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
-#	:WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
-# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
-# on the <smacs>=\E[12m  -- esr)
-#
-# klone+sgr-dumb is an error since the acsc does not match -TD
-#
-# In this description based on SCO's keyboard(HW) manpage list of default
-# function key values:
-#	F13-F24 are shifted F1-F12
-#	F25-F36 are control F1-F12
-#	F37-F48 are shift+control F1-F12
-#
-# hpa/vpa work in the console, but not in scoterm:
-#	hpa=\E[%p1%dG,
-#	vpa=\E[%p1%dd,
-#
-# SCO's terminfo uses
-#	kLFT=\E[d,
-#	kRIT=\E[c,
-# which do not work (console or scoterm).
-#
-# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
-scoansi-old|SCO Extended ANSI standard crt (5.0.5),
-	OTbs, am, bce, eo, xon,
-	colors#8, cols#80, it#8, lines#25, pairs#64,
-	acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
-	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
-	civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
-	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
-	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
-	cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
-	dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
-	ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
-	hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
-	ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
-	kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
-	kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
-	kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
-	kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
-	kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
-	kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
-	kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
-	kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
-	kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
-	kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
-	kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
-	kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
-	rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
-	rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
-	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
-	smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
-scoansi-new|SCO Extended ANSI standard crt (5.0.6),
-	km,
-	civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
-	cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
-	rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
-	sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
-	smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
-	smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
-	smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
-	smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
-	wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
-	use=scoansi-old,
-# make this easy to change...
-scoansi|SCO Extended ANSI standard crt,
-	use=scoansi-old,
-
-# This actually describes the generic SVr4 display driver for Intel boxes.
-# The <dim=\E[2m> isn't documented and therefore may not be reliable.
-# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
-att6386|at386|386at|AT&T WGS 6386 console,
-	am, bw, eo, xon,
-	cols#80, it#8, lines#25,
-	acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
-	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
-	clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
-	cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
-	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
-	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
-	dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
-	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
-	ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
-	indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
-	kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
-	kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
-	kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
-	kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
-	knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
-	ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
-	sc=\E7,
-	sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
-	sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
-	tbc=\E[2g, vpa=\E[%i%p1%dd, use=klone+color,
-# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
-pc6300plus|AT&T 6300 plus,
-	OTbs, am, xon,
-	cols#80, lines#24,
-	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
-	clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
-	cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
-	dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
-	home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
-	invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
-	kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
-	kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
-	nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
-	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
-
-# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
-#
-# I have a UNIX PC which I use as a terminal attached to my Linux PC.
-# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
-# is broken. All the special key sequences are broken, making it unusable
-# with Emacs. The problem stems from the following:
-#
-# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
-# keypad!), loadable fonts, and strange highlighting modes ("dithered"
-# half-intensity, "smeared" bold, and real strike-out, for example.) It also
-# uses resizable terminal windows, but the bundled terminal program always
-# uses an 80x24 window (and doesn't support seem to support a 132-column
-# mode.)
-#
-# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
-# library which was a superset of SVr3.5 curses (called tam, for "terminal
-# access method".) tam includes support for real, overlapping windows,
-# onscreen function key labels, and bitmap graphics. But since the primary
-# user interface on the UNIX PC was a GUI program (ua, for "user
-# assistant",) and remote administration was considered important for the
-# machine, tam also supported VT100-compatible terminals attached to the
-# serial port or used across the StarLan network. To simulate the extra keys
-# not present on a VT100, users could press ESC and a two-letter sequence,
-# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
-# however, were not the same as those sent by the actual Undo key. The
-# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
-# (If you're interested in adding some of the tam calls to ncurses, btw, I
-# have the full documentation and several programs which use tam. It also
-# used an extended terminfo format to describe key sequences, special
-# highlighting modes, etc.)
-#
-# KEYS: This means that ncurses would quite painful on the UNIX PC, since
-# there are two sequences for every key-modifier combination (local keyboard
-# sequence and remote "VT100" sequence.) But I doubt many people are trying
-# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
-# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
-# seem to have been built from the manual describing the VT100 sequences.
-# This means it doesn't work for a real live UNIX PC.
-#
-# FONTS: The UNIX PC also has a strange interpretation of "alternate
-# character set". Rather than the VT100 graphics you might expect, it allows
-# up to 8 custom fonts to be loaded at any given time. This means that
-# programs expecting VT100 graphics will usually be disappointed. For this
-# reason I have disabled the smacs/rmacs sequences, but they could easily be
-# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
-# manpage), should you wish to do so:
-#
-# SGR10 - Select font 0 - ESC [ 10 m or SO
-# SGR11 - Select font 1 - ESC [ 11 m or SI
-# SGR12 - Select font 2 - ESC [ 12 m
-# ... (etc.)
-# SGR17 - Select font 7 - ESC [ 17 m
-#
-# Graphics for line drawing are not reliably found at *any* character
-# location because the UNIX PC has dynamically reloadable fonts. I use font
-# 0 for regular text and font 1 for italics, but this is by no means
-# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
-#
-# MISC: The cursor visible/cursor invisible sequences were swapped in the
-# distributed terminfo.
-#
-# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
-# the UNIX PC terminfo entry. The modified version works great with Lynx,
-# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
-# attached by serial cable. In Emacs, even the Undo key works, and many
-# applications can now use the F1-F8 keys.
-#
-# esr's notes:
-#	Terminfo entry for the AT&T Unix PC 7300
-#	from escape(7) in Unix PC 7300 Manual.
-#	Somewhat similar to a vt100-am (but different enough
-#	to redo this from scratch.)
-#
-#	/***************************************************************
-#	*
-#	*           FONT LOADING PROGRAM FOR THE UNIX PC
-#	*
-#	*     This routine loads a font defined in the file ALTFONT
-#	*     into font memory slot #1.  Once the font has been loaded,
-#	*     it can be used as an alternative character set.
-#	*
-#	*     The call to ioctl with the argument WIOCLFONT is the key
-#	*     to this routine.  For more information, see window(7) in
-#	*     the PC 7300 documentation.
-#	***************************************************************/
-#	#include <string.h>		/* needed for strcpy call */
-#	#include <sys/window.h>         /* needed for ioctl call */
-#	#define FNSIZE	60		/* font name size */
-#	#define ALTFONT  "/usr/lib/wfont/special.8.ft"  /* font file */
-#	/*
-#	*     The file /usr/lib/wfont/special.8.ft comes with the
-#	*     standard PC software.  It defines a graphics character set
-#	*     similar to that of the Teletype 5425 terminal.  To view
-#	*     this or other fonts in /usr/lib/wfont, use the command
-#	*     cfont <filename>.  For further information on fonts see
-#	*     cfont(1) in the PC 7300 documentation.
-#	*/
-#
-#	struct altfdata 	/* structure for alt font data */
-#	{
-#	short	altf_slot;		/* memory slot number */
-#	char	altf_name[FNSIZE];	/* font name (file name) */
-#	};
-#	ldfont()
-#	{
-#		int wd;		/* window in which altfont will be */
-#		struct altfdata altf;
-#		altf.altf_slot=1;
-#		strcpy(altf.altf_name,ALTFONT);
-#		for (wd =1; wd < 12; wd++) {
-#		     ioctl(wd, WIOCLFONT,&altf);
-#	        }
-#	}
-#
-# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
-# they're confirmed by the man page for the System V display---esr)
-#
-att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
-	am, xon,
-	cols#80, it#8, lines#24,
-	bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
-	clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
-	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
-	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
-	cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
-	ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
-	il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
-	kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
-	kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
-	kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
-	kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
-	kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
-	kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
-	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
-	ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
-	kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
-	kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
-	kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
-	kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
-	kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
-	ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
-	rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
-	smul=\E[4m,
-
-# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
-# from SGI's terminfo database.  SGI's entry shows F9-F12 with the codes
-# for the application keypad mode.  We have added iris-ansi-ap rather than
-# change the original to keypad mode.
-#
-# (iris-ansi: added rmam/smam based on init string -- esr)
-#
-# This entry, and those derived from it, is used in xwsh (also known as
-# winterm).  Some capabilities that do not fit into the terminfo model
-# include the shift- and control-functionkeys:
-#
-# F1-F12 generate different codes when shift or control modifiers are used.
-# For example:
-#	F1      	\E[001q
-#	shift F1	\E[013q
-#	control-F1	\E[025q
-#
-# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
-# \EOP to \EOS.  The shifted and control modifiers still do the same thing.
-#
-# The cursor keys also have different codes:
-#	control-up	\E[162q
-#	control-down	\E[165q
-#	control-left	\E[159q
-#	control-right	\E[168q
-#
-#	shift-up	\E[161q
-#	shift-down	\E[164q
-#	shift-left	\E[158q
-#	shift-right	\E[167q
-#
-#	control-tab	\[072q
-#
-iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
-	am,
-	cols#80, it#8, lines#40,
-	bel=^G, bold=\E[1m, clear=\E[H\E[2J,
-	cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
-	cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
-	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
-	cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
-	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
-	home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
-	is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
-	kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
-	kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
-	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
-	kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
-	kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
-	kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
-	kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
-	knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
-	kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
-	rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
-	sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
-	tbc=\E[3g,
-iris-ansi-ap|IRIS ANSI in application-keypad mode,
-	is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
-	kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
-
-# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
-# (T.Dickey 98/1/24)
-iris-color|xwsh|IRIX ANSI with color,
-	ncv#33,
-	csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
-	ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
-	rmul=\E[24m, rs1=\Ec,
-	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
-	sitm=\E[3m, use=vt100+enq, use=klone+color,
-	use=iris-ansi-ap,
-
-# The following is a version of the ibm-pc entry distributed with PC/IX,
-# (Interactive Systems' System 3 for the Big Blue), modified by Richard
-# McIntosh at UCB/CSM.  The :pt: and :uc: have been removed from the original,
-# (the former is untrue, and the latter failed under UCB/man); standout and
-# underline modes have been added.  Note: this entry describes the "native"
-# capabilities of the PC monochrome display, without ANY emulation; most
-# communications packages (but NOT PC/IX connect) do some kind of emulation.
-pcix|PC/IX console,
-	am, bw, eo,
-	cols#80, lines#24,
-	clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
-	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
-	home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
-	smul=\E[4m,
-
-# (ibmpcx: this entry used to be known as ibmx.
-# It formerly included the following extension capabilities:
-#	:GC=b:GL=v:GR=t:RT=^J:\
-#	:GH=\E[196g:GV=\E[179g:\
-#	:GU=\E[193g:GD=\E[194g:\
-#	:G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
-#	:CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
-#	:WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
-# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
-# ":kh=\E[Y:".  Added IBM-PC forms characters and highlights, they match
-# what was there before. -- esr)
-ibmpcx|xenix|ibmx|IBM PC xenix console display,
-	OTbs, am, msgr,
-	cols#80, lines#25,
-	clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
-	cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
-	ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
-	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
-	kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
-	kpp=\E[Z, use=klone+acs, use=klone+sgr8,
-
 #### QNX
 #
 
@@ -1373,7 +1948,7 @@
 qansi-g|QNX ANSI,
 	am, eslok, hs, xon,
 	colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
-	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
+	acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
 	clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
 	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
@@ -1416,7 +1991,7 @@
 	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
 	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
-	smul=\E[4m, tbc=\E[2g,
+	smul=\E[4m, tbc=\E[3g,
 	tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
 #
 qansi|QNX ansi with console writes,
@@ -1435,6 +2010,204 @@
 qansi-w|QNX ansi for windows,
 	xvpa, use=qansi-m,
 
+#### SCO consoles
+
+# SCO console and SOS-Syscons console for 386bsd
+# (scoansi: had unknown capabilities
+#	:Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
+#	:GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
+#	:G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
+#	:CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
+#	:WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
+# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
+# on the <smacs>=\E[12m  -- esr)
+#
+# klone+sgr-dumb is an error since the acsc does not match -TD
+#
+# In this description based on SCO's keyboard(HW) manpage list of default
+# function key values:
+#	F13-F24 are shifted F1-F12
+#	F25-F36 are control F1-F12
+#	F37-F48 are shift+control F1-F12
+#
+# hpa/vpa work in the console, but not in scoterm:
+#	hpa=\E[%p1%dG,
+#	vpa=\E[%p1%dd,
+#
+# SCO's terminfo uses
+#	kLFT=\E[d,
+#	kRIT=\E[c,
+# which do not work (console or scoterm).
+#
+# Console documents only 3 attributes can be set with SGR (so we don't use sgr).
+scoansi-old|SCO Extended ANSI standard crt (5.0.5),
+	OTbs, am, bce, eo, xon,
+	colors#8, cols#80, it#8, lines#25, pairs#64,
+	acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
+	civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP,
+	dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M,
+	ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I,
+	hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
+	ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H,
+	kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
+	kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
+	kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
+	kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
+	kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
+	kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
+	kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
+	kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
+	kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
+	kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+	kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8,
+	rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m,
+	rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
+	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m,
+	smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
+scoansi-new|SCO Extended ANSI standard crt (5.0.6),
+	km,
+	civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr,
+	cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m,
+	rep=\E[%p1%d;%p2%db, rmm=\E[=11L,
+	sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m,
+	smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm,
+	smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m,
+	smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m,
+	smgtp=\E[=0;%i%p1%dm, smm=\E[=10L,
+	wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr,
+	use=scoansi-old,
+# make this easy to change...
+scoansi|SCO Extended ANSI standard crt,
+	use=scoansi-old,
+
+#### SGI consoles
+
+# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
+# from SGI's terminfo database.  SGI's entry shows F9-F12 with the codes
+# for the application keypad mode.  We have added iris-ansi-ap rather than
+# change the original to keypad mode.
+#
+# (iris-ansi: added rmam/smam based on init string -- esr)
+#
+# This entry, and those derived from it, is used in xwsh (also known as
+# winterm).  Some capabilities that do not fit into the terminfo model
+# include the shift- and control-functionkeys:
+#
+# F1-F12 generate different codes when shift or control modifiers are used.
+# For example:
+#	F1      	\E[001q
+#	shift F1	\E[013q
+#	control-F1	\E[025q
+#
+# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
+# \EOP to \EOS.  The shifted and control modifiers still do the same thing.
+#
+# The cursor keys also have different codes:
+#	control-up	\E[162q
+#	control-down	\E[165q
+#	control-left	\E[159q
+#	control-right	\E[168q
+#
+#	shift-up	\E[161q
+#	shift-down	\E[164q
+#	shift-left	\E[158q
+#	shift-right	\E[167q
+#
+#	control-tab	\[072q
+#
+iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
+	am,
+	cols#80, it#8, lines#40,
+	bel=^G, bold=\E[1m, clear=\E[H\E[2J,
+	cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
+	cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+	cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+	home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
+	is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
+	kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
+	kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
+	kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
+	kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
+	kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
+	kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
+	knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
+	kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
+	rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
+	sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
+	tbc=\E[3g,
+iris-ansi-ap|IRIS ANSI in application-keypad mode,
+	is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
+	kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
+
+# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
+# (T.Dickey 98/1/24)
+iris-color|xwsh|IRIX ANSI with color,
+	ncv#33,
+	csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
+	ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
+	rmul=\E[24m, rs1=\Ec,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+	sitm=\E[3m, use=vt100+enq, use=klone+color,
+	use=iris-ansi-ap,
+
+#### OpenBSD consoles
+#
+# From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011.
+#
+# The following terminal descriptions for the  AMD/Intel PC console
+# were prepared  based on information contained in  the OpenBSD-4.9
+# termtypes.master and wscons(4) & vga(4) manuals (2010, November).
+#
+# Added bce based on testing with tack -TD
+# Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD
+# Changed kbs to DEL and removed keys that duplicate stty settings -TD
+#
+pccon+keys|OpenBSD PC keyboard keys,
+	kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~,
+	kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
+	kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
+	kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+	krfr=^R,
+pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console,
+	acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o,
+	sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
+pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console,
+	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	enacs=\E)0$<5>, rmacs=\E(B$<5>,
+	sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>,
+	sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>,
+pccon+colors|ANSI colors for OpenBSD PC console,
+	bce,
+	colors#8, pairs#64,
+	op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+pccon+base|base capabilities for OpenBSD PC console,
+	am, km, mc5i, msgr, npc, nxon, xenl, xon,
+	cols#80, it#8, lines#24,
+	bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
+	dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+	el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+	il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l,
+	rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m,
+	tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics,
+	use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys,
+pccon0|OpenBSD PC console with simple ASCII pseudographics,
+	use=pccon0-m, use=pccon+colors,
+pccon-m|OpenBSD PC console without colors,
+	use=pccon+base, use=pccon+sgr+acs, use=pccon+keys,
+pccon|OpenBSD PC console,
+	use=pccon-m, use=pccon+colors,
+
 #### NetBSD consoles
 #
 # pcvt termcap database entries (corresponding to release 3.31)
@@ -1572,7 +2345,7 @@
 ofcons|DNARD OpenFirmware console,
 	bw,
 	cols#80, lines#30,
-	bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
+	bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M,
 	cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
 	cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
 	cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
@@ -1584,8 +2357,8 @@
 	kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
 	kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
 	rmso=\2330m, rmul=\2330m,
-	sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
-	sgr0=\2330m,
+	sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m,
+	sgr0=\2330m, smso=\2337m, smul=\2334m,
 
 # NetBSD "wscons" emulator in vt220 mode.
 # This entry is based on the NetBSD termcap entry, correcting the ncv value.
@@ -1602,15 +2375,53 @@
 wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
 	bce, msgr,
 	colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
-	is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
+	civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H,
+	kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
 	kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
 	kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
-	kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm,
-	setaf=\E[3%p1%dm, use=vt220,
+	kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
+	setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
 
 wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
 	km, use=wsvt25,
 
+# NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD
+#
+# TERM is by default vt100 for the console, wsvt25 for other ttys.
+# Initial testing set TERM=xterm, based on comments by developers, found too
+# many differences to continue in that path.  However, test-results may be
+# useful to people curious about compatibility with xterm.
+#
+# Testing with tack:
+# -----------------
+# Failed: cbt, bel, flash, cvvis, smul (color), blink, invis
+# There is color-bleeding in the color-pairs screen.
+# Attributes do not work with color
+# Failed: vpa/hpa
+# Failed: kf1-kf4, kf13-kf48, khome, kend
+# 	(effectively xterm-r6 for function-keys)
+# None of the function or cursor key-modifiers are encoded.
+# Console hangs in the smm/rmm test if TERM=xterm, does not show test
+#
+# Testing with vttest:
+# -------------------
+# Identifies as vt220 with selective erase
+# 	(however, selective erase refers to DECSCA, SPA)
+# Does not implement vt52
+# Uses spaces to simulate double-size characters
+# Does not support 8-bit controls
+# Does not support VT220 reports
+# Does not support send/receive mode
+# Supports ECH (like rxvt)
+# Does not support DECSCA
+# Does not support any of the ISO-6429 cursor-movement
+# Does not support any of the ISO-6429 miscellaneous tests
+# 	(SL/SR also leave unexpected char on screen too)
+# Background does not change in menu 11.6.9 (SGR 22-27)
+# None of the xterm special features tests work
+netbsd6|NetBSD wscons in 25 line DEC VT100 mode,
+	kbs=\177, use=wsvt25,
+
 # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
 # DECstation/pmax.
 rcons|BSD rasterconsole,
@@ -1705,6 +2516,8 @@
 cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
 	acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
 	use=cons25w,
+cons25-debian|freebsd console with debian backspace (25-line ansi mode),
+	kbs=\177, kdch1=\E[3~, use=cons25,
 cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
 	colors@, pairs@,
 	bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
@@ -1760,6 +2573,52 @@
 cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
 	lines#60, use=cons25l1-m,
 
+# Starting with FreeBSD 8, an alternative configuration for syscons is provided,
+# which is intended to be xterm-compatible.  See for example
+#	http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/
+# in particular scterm-teken.c
+#
+# For FreeBSD 9 and 10:
+# --------------------
+# The /etc/ttys entries for console and other ttys are all configured to set
+# TERM=xterm.
+#
+# Testing with tack:
+# There is no VT100 line-drawing (uses +'s and -'s)
+# Shifted f1-f12 give cons25 codes, rather than xterm function-keys
+#
+# Testing with vttest:
+# Menu 2 diamonds don't work, blink ditto, light background ditto
+# The terminal identifies itself as VT100 with AVO
+# There is no VT52 support
+# There is no doublesize character support
+# The terminal supports ECH (like rxvt)
+# The terminal does not support send/receive mode
+# The terminal supports all of the ISO-6429 cursor-movement
+# The terminal supports some of the ISO-6429 miscellaneous tests
+#	(SL/SR also leave unexpected char on screen too)
+#
+# Considering cons25 as a base, the line-drawing mostly works, but is missing
+# the cells which happen to have ASCII control-character values:
+#	-    ^X    arrow pointing up
+#	.    ^Y    arrow pointing down
+#	i    ^Y    lantern
+#	`    ^D    diamond
+#
+# Those are removed from this entry's acsc string to avoid confusion.
+# The resulting description provides correct line-drawing and function-keys -TD
+teken|syscons with teken,
+	bw@, mir, xenl,
+	acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
+	civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG,
+	hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\E[3~, kend=\E[F, kent=^M, kf1=\EOP, kf10=\E[21~,
+	kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l,
+	smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
+	u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25,
+
 #### 386BSD and BSD/OS Consoles
 #
 
@@ -1828,6 +2687,7 @@
 bsdos-ppc|PowerPC BSD/OS Console,
 	use=bsdos-pc,
 
+
 #### DEC VT52
 # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
 #
@@ -1849,7 +2709,7 @@
 vt52|dec vt52,
 	OTbs,
 	cols#80, it#8, lines#24,
-	acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M,
+	acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M,
 	cub1=\ED, cud1=\EB, cuf1=\EC,
 	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
 	el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
@@ -2161,8 +3021,9 @@
 # with the key marked (ESC) on the vt220.  See vt220d for an alternate mapping.
 # PF1--PF4 are used as F1--F4.
 #
+# added msgr -TD
 vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
-	OTbs, OTpt, am, mir, xenl, xon,
+	OTbs, OTpt, am, mir, msgr, xenl, xon,
 	cols#80, lines#24, vt#3,
 	OTnl=^J,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
@@ -2188,8 +3049,15 @@
 # A much better description of the VT200/220; used to be vt220-8
 # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
 # designation to accommodate bug in pcvt -TD
+#
+# Here's a picture of the VT220 editing keypad:
+#	+--------+--------+--------+
+#	| Find   | Insert | Remove |
+#	+--------+--------+--------+
+#	| Select | Prev   | Next   |
+#	+--------+--------+--------+
 vt220|vt200|dec vt220,
-	OTbs, am, mc5i, mir, msgr, xenl, xon,
+	OTbs, am, mir, msgr, xenl, xon,
 	cols#80, it#8, lines#24, vt#3,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
@@ -2201,20 +3069,21 @@
 	flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
 	ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
 	il=\E[%p1%dL, il1=\E[L, ind=\ED,
-	is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
-	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
-	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
-	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
-	kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
-	kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
-	kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
-	lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
-	mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
-	rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
-	rmul=\E[24m, rs1=\E[?3l, sc=\E7,
+	is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D,
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
+	kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+	kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
+	kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
+	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
+	khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+	krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
+	nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>,
+	rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+	rs1=\E[?3l, sc=\E7,
 	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
 	sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
-	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp,
+	use=ansi+enq,
 vt220-w|vt200-w|DEC vt220 in wide mode,
 	cols#132,
 	rs3=\E[?3h, use=vt220,
@@ -2231,18 +3100,18 @@
 	flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
 	ich=\233%p1%d@, if=/usr/share/tabset/vt100,
 	il=\233%p1%dL, il1=\233L, ind=\ED,
-	is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
+	is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H,
 	kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
-	kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
-	kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
-	kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
-	kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
-	kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
-	knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
-	lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
-	nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
-	rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
-	rs1=\233?3l, sc=\E7,
+	kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~,
+	kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~,
+	kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~,
+	kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~,
+	kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H,
+	kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~,
+	kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i,
+	mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM,
+	rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m,
+	rmul=\23324m, rs1=\233?3l, sc=\E7,
 	sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
 	sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
 	smso=\2337m, smul=\2334m, tbc=\2333g,
@@ -2279,14 +3148,15 @@
 #
 # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
 # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
+# added msgr -TD
 vt200-js|vt220-js|dec vt200 series with jump scroll,
-	am,
+	am, msgr,
 	cols#80,
 	bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
-	cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
-	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
-	il1=\E[L, ind=\ED,
-	is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
+	cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
+	ht=^I, il1=\E[L, ind=\ED,
+	is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
 	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
 	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
 	rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
@@ -2318,7 +3188,7 @@
 # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
 # (vt320: uncommented <fsl> --esr)
 vt320|vt300|dec vt320 7 bit terminal,
-	am, eslok, hs, mir, msgr, xenl,
+	am, hs, mir, msgr, xenl,
 	cols#80, lines#24, wsl#80,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
@@ -2327,9 +3197,8 @@
 	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
 	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
-	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
-	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
-	il1=\E[L, ind=\ED,
+	ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
+	hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
 	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
 	kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
 	kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
@@ -2337,8 +3206,7 @@
 	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
 	kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
 	kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I,
-	kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i,
-	mc5=\E[?5i, nel=\EE, rc=\E8, rev=\E[7m,
+	kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m,
 	rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
 	rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
 	rmul=\E[m,
@@ -2347,7 +3215,7 @@
 	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
 	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
 	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
-	tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
+	use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq,
 vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
 	am@,
 	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
@@ -2457,33 +3325,38 @@
 	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
 	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
 	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
-	tsl=\E[2$~\E[1$}\E[1;%dH,
+	tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl,
 
 # (vt420: I removed <kf0>, it collided with <kf10>.  I also restored
 # a missing <sc> -- esr)
+# add msgr and other capabilities from vt220 -TD
 vt420|DEC VT420,
-	am, mir, xenl, xon,
-	cols#80, lines#24, vt#3,
+	am, mir, msgr, xenl, xon,
+	cols#80, it#8, lines#24, vt#3,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
-	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
-	clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
-	cub1=^H, cud1=\E[B, cuf1=\E[C,
-	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
-	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
-	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
-	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
-	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
-	kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
-	kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
-	kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
-	kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
-	rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
-	rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
+	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
+	clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A,
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
+	ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K,
+	enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I,
+	hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300,
+	il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H,
+	is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+	kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~,
+	kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~,
+	kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~,
+	kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE,
+	rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
+	ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
 	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
-	rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
+	rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7,
 	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
-	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
-	smkx=\E=, smso=\E[7m, smul=\E[4m,
+	sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h,
+	smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	use=ansi+pp, use=dec+sl, use=ansi+enq,
 
 # DEC VT220 and up support DECUDK (user-defined keys).  DECUDK (i.e., pfx)
 # takes two parameters, the key and the string.  Translating the key is
@@ -2556,58 +3429,22 @@
 # terminal mode is being used.  If Set-Up has been disabled or
 # assigned to an unknown key, Set-Up may be entered by pressing
 # [F3] as the first key after power up, regardless of keyboard type.
-# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
 vt520|DEC VT520,
-	am, mir, xenl, xon,
-	cols#80, lines#24, vt#3,
-	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
-	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
-	clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
-	cub1=^H, cud1=\E[B, cuf1=\E[C,
-	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
-	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
-	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
-	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
-	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
-	kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
-	kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
-	kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
-	kslt=\E[4~,
-	pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
-	rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
-	ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
-	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
-	rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
-	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
-	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
-	smso=\E[7m, smul=\E[4m,
+	use=ansi+rca, use=vt420, use=ansi+tabs,
 
-# (vt525: I added <rmam>/<smam> based on the init string;
-# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
 vt525|DEC VT525,
-	am, mir, xenl, xon,
-	cols#80, lines#24, vt#3,
-	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
-	bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
-	clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
-	cub1=^H, cud1=\E[B, cuf1=\E[C,
-	cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
-	dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
-	if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
-	is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
-	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
-	kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
-	kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
-	kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
-	kslt=\E[4~,
-	pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
-	rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
-	ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
-	rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
-	rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
-	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
-	sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
-	smso=\E[7m, smul=\E[4m,
+	use=vt520,
+
+# I just got a brand new Boundless VT520 with that company's "ANSI 2011"
+# Keyboard, which replaces the old LK41R-AA keyboard.
+#
+# In trying to get the function keys to work, I had to cobble my own
+# terminfo.src entry, since the existing vt520 entry doesn't include most of
+# the function keys.  If I blend the entries for "vt420f" and "vt220+keypad"
+# I seem to get them all -Mike Gran
+vt520ansi|Boundless VT520 ANSI,
+	use=ansi+rca, use=vt420f, use=vt220+keypad,
+	use=ansi+tabs,
 
 #### VT100 emulations
 #
@@ -2671,8 +3508,8 @@
 # the default behavior -TD
 
 putty|PuTTY terminal emulator,
-	am, bce, bw, ccc, hs, mir, msgr, xenl, xon,
-	colors#8, it#8, ncv#22, pairs#64,
+	am, bce, bw, ccc, mir, msgr, xenl, xon, XT,
+	colors#8, it#8, ncv#22, pairs#64, U8#1,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
 	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
@@ -2681,21 +3518,16 @@
 	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
 	dch=\E[%p1%dP, dch1=\E[P,
 	dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;,
-	dl=\E[%p1%dM, dl1=\E[M, dsl=\E]0;\007, ech=\E[%p1%dX,
-	ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
-	flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, hpa=\E[%i%p1%dG,
-	ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
-	indn=\E[%p1%dS,
+	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+	el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
+	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L,
+	ind=^J, indn=\E[%p1%dS,
 	initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
 	is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R,
-	kb2=\E[G, kbs=\177, kcan=^C, kcbt=\E[Z, kcub1=\E[D,
-	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
-	kend=\E[4~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
-	kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
-	kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
-	kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
-	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
-	khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
+	kLFT=\EOD, kRIT=\EOC, kb2=\E[G, kbs=\177, kcbt=\E[Z,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
+	kind=\EOB, kmous=\E[M, knp=\E[6~, kpp=\E[5~, kri=\EOA,
 	kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m,
 	ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l,
 	rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m,
@@ -2706,20 +3538,82 @@
 	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h,
 	smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
-	tbc=\E[3g, tsl=\E]0;, vpa=\E[%i%p1%dd, use=vt102+enq,
+	tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3J, use=putty+fnkeys,
+	use=vt102+enq, use=xterm+sl,
 vt100-putty|Reset PuTTY to pure vt100,
 	rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p,
 	use=vt100,
 # palette is hardcoded...
 putty-256color|PuTTY 0.58 with xterm 256-colors,
-	initc@, use=xterm+256color, use=putty,
+	use=xterm+256setaf, use=putty,
 
 # One of the keyboard selections is "VT100+".
 # pterm (the X11 port) uses shifted F1-F10 as F11-F20
 putty-vt100|VT100+ keyboard layout,
+	use=putty+fnkeys+vt100, use=putty,
+
+putty-sco|putty with SCO function keys,
+	use=putty+fnkeys+sco, use=putty,
+
+# PuTTY has more than one section in its Keyboard configuration:
+# a) backspace/delete, which we ignore since that choice largely depends on
+#    whether one matches Unix and BSD or Linux.
+# b) home/end keys, also ignored because the "rxvt" setting sends keys which
+#    are unrelated to rxvt's actual settings.
+# c) function keys and keypad - this is the interesting part.  None of the
+#    selections match any of their respective namesakes, but they are shown
+#    here to help users who expect that the selections do what is implied.
+#
+# This is the default setting for PuTTY
+putty+fnkeys|fn-keys for PuTTY,
+	use=putty+fnkeys+esc,
+
+putty+fnkeys+esc|ESC[n~ fn-keys for PuTTY,
+	kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+	kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
+	kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~,
+	kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~,
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+
+putty+fnkeys+linux|Linux fn-keys for PuTTY,
+	kf1=\E[[A, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
+	use=putty+fnkeys+esc,
+
+putty+fnkeys+xterm|Xterm R6 fn-keys for PuTTY,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+	use=putty+fnkeys+esc,
+
+putty+fnkeys+vt400|VT400 fn-keys for PuTTY,
+	use=putty+fnkeys+esc,
+
+# Shifted F1 is F11.  F13-F20 inherit from the defaults, and the last distinct
+# key is F20.
+putty+fnkeys+vt100|VT100+ fn-keys for PuTTY,
 	kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ,
 	kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
-	kf9=\EOX, use=putty,
+	kf9=\EOX, use=putty+fnkeys+esc,
+
+# Unlike xterm-sco, this leaves kmous ambiguous with kf1.
+#
+# Use modifiers to obtain function keys past 12:
+# F1-F12 - normal
+# F13-F24 - shift
+# F25-F36 - control/alt
+# F37-F48 - control/shift
+#
+putty+fnkeys+sco|SCO fn-keys for PuTTY,
+	kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
+	kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b,
+	kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f,
+	kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k,
+	kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O,
+	kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t,
+	kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y,
+	kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\,
+	kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{,
+	kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
+	kich1=\E[L, knp=\E[G, kpp=\E[I,
 
 # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
 # T. Teranishi dated Mar 10, 1998.  It is a free software terminal emulator
@@ -2864,14 +3758,19 @@
 ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+,
 	use=ms-vt100+,
 
+# expect-5.44.1.15/example/tkterm
 # a minimal subset of a vt100 (compare with "news-unk).
+#
+# The missing "=" in smkx is not a typo (here), but an error in tkterm.
 tt|tkterm|Don Libes' tk text widget terminal emulator,
-	clear=\E[H\E[J, cr=^M, cuf1=\E[C, cup=\E[%p1%d;%p2%dH,
-	cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
-	kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, rmso=\E[m,
+	clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
+	cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ,
+	kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
+	kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E,
 	smso=\E[7m,
 
-#### X terminal emulators
+######## X TERMINAL EMULATORS
+#### XTERM
 #
 # You can add the following line to your .Xdefaults to change the terminal type
 # set by the xterms you start up to my-xterm:
@@ -2934,7 +3833,7 @@
 # added khome/kend, hts based on the R6 xterm code - TD
 # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
 # for compatibility with other emulators).
-xterm-r6|xterm-old|xterm X11R6 version,
+xterm-r6|xterm X11R6 version,
 	OTbs, am, km, mir, msgr, xenl,
 	cols#80, it#8, lines#24,
 	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
@@ -2960,10 +3859,12 @@
 	sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
 	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
 	use=vt100+enq,
+xterm-old|antique xterm version,
+	use=xterm-r6,
 # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
 # The name has been changed and some aliases have been removed.
 xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
-	OTbs, am, bce, km, mir, msgr, xenl,
+	OTbs, am, bce, km, mir, msgr, xenl, XT,
 	cols#80, it#8, lines#24, ncv@,
 	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
@@ -3007,13 +3908,13 @@
 # xterm to use terminfo-based descriptions with the titeInhibit resource.
 # -- the distribution contained incorrect khome/kend values -TD
 xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
-	mc5i,
 	blink=\E[5m, ich1@, invis=\E[8m,
 	is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
-	mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
-	rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
+	rmcup=\E[?1047l\E[?1048l, rs1=\Ec,
+	rs2=\E[!p\E[?3;4l\E[4l\E>,
 	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
-	smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
+	smcup=\E[?1048h\E[?1047h, use=ansi+pp,
+	use=xterm-xf86-v33,
 
 # This version was released in XFree86 4.0.
 xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
@@ -3054,12 +3955,14 @@
 # This version reflects the current xterm features.
 xterm-new|modern xterm terminal emulator,
 	npc,
-	indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
-	kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
-	kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
-	kend=\EOF, kent=\EOM, khome=\EOH, kich1=\E[2~, kmous=\E[M,
-	knp=\E[6~, kpp=\E[5~, rin=\E[%p1%dT, use=xterm+pcfkeys,
+	indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,
+	rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux,
 	use=xterm-basic,
+
+# This fragment is for people who cannot agree on what the backspace key
+# should send.
+xterm+kbs|fragment for backspace key,
+	kbs=^H,
 #
 # This fragment describes as much of XFree86 xterm's "pc-style" function
 # keys as will fit into terminfo's 60 function keys.
@@ -3225,7 +4128,7 @@
 #
 # This chunk is used for building the VT220/Sun/PC keyboard variants.
 xterm-basic|modern xterm terminal emulator - common,
-	OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
+	OTbs, am, bce, km, mir, msgr, xenl, AX, XT,
 	colors#8, cols#80, it#8, lines#24, pairs#64,
 	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
@@ -3233,34 +4136,40 @@
 	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
 	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
-	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
-	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
-	flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
-	ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
-	ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=^H,
-	kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
+	cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+	el1=\E[1K, flash=\E[?5h$<100/>\E[?5l, home=\E[H,
+	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+	il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
+	is2=\E[!p\E[?3;4l\E[4l\E>, kmous=\E[M, meml=\El,
 	memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
-	rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
-	rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
-	rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
+	ritm=\E[23m, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l,
+	rmir=\E[4l, rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m,
+	rmul=\E[24m, rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
 	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
 	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
 	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
-	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
-	sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
-	smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
-	smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
+	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
+	sgr0=\E(B\E[m, sitm=\E[3m, smacs=\E(0, smam=\E[?7h,
+	smcup=\E[?1049h, smir=\E[4h, smkx=\E[?1h\E=,
+	smm=\E[?1034h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	vpa=\E[%i%p1%dd, E3=\E[3J, use=ansi+pp, use=xterm+kbs,
+	use=vt100+enq,
 
 # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
 # In retrospect, something like xterm-r6 was intended here -TD
 xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
 	rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
 
-# This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
+# If configured to support 88- or 256-colors (which is fairly common in 2009),
+# xterm also recognizes the control sequences for initc -TD
 xterm-16color|xterm with 16 colors like aixterm,
+	ccc,
+	initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
 	use=ibm+16color, use=xterm-new,
 
-# This is a compile-time feature of XFree86 xterm beginning with
+# 256-colors is a compile-time feature of XFree86 xterm beginning with
 # patch #111 (1999/7/10) -TD
 xterm+256color|xterm 256-color feature,
 	ccc,
@@ -3270,7 +4179,15 @@
 	setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
 	setb@, setf@,
 
-# This is a compile-time feature of XFree86 xterm beginning with
+xterm+256setaf|xterm 256-color (set-only),
+	ccc@,
+	colors#256, pairs#32767,
+	initc@,
+	setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
+	setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
+	setb@, setf@,
+
+# 88-colors is a compile-time feature of XFree86 xterm beginning with
 # patch #115 (1999/9/18) -TD
 #
 # Note that the escape sequences used are the same as for 256-colors - xterm
@@ -3295,13 +4212,27 @@
 xterm-88color|xterm with 88 colors,
 	use=xterm+88color, use=xterm-256color,
 
-# These two are used to demonstrate the any-event mouse support, i.e., by
-# using an extended name "XM" which tells ncurses to put the terminal into
-# a special mode when initializing the xterm mouse.
-xterm-1002|testing xterm-mouse,
-	XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new,
-xterm-1003|testing xterm-mouse,
-	XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new,
+# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who
+# asked for some of xterm's advanced features to be added to its terminfo
+# entry.  It defines extended capabilities not found in standard terminfo or
+# termcap.  These are useful in tmux, for instance, hence the name.
+#
+# One caveat in adding extended capabilities in ncurses is that if the names
+# are longer than two characters, then they will not be visible through the
+# termcap interface.
+#
+# Ms modifies the selection/clipboard.  Its parameters are
+#	p1 = the storage unit (clipboard, selection or cut buffer)
+#	p2 = the base64-encoded clipboard content.
+#
+# Ss is used to set the cursor style as described by the DECSCUSR
+#	function to a block or underline.
+# Se resets the cursor style to the terminal power-on default.
+#
+# Cs and Cr set and reset the cursor colour.
+xterm+tmux|advanced xterm features used in tmux,
+	Cr=\E]112\007, Cs=\E]12;%p1%s\007,
+	Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q,
 
 # This is another variant, for XFree86 4.0 xterm (T.Dickey)
 # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
@@ -3328,8 +4259,8 @@
 	hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
 	il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
 	is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
-	ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
-	kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
+	ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q,
+	kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
 	kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
 	kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
 	kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
@@ -3351,6 +4282,7 @@
 	smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
 	smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR,
 	u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
+	use=xterm+kbs,
 
 xterm-hp|xterm with hpterm function keys,
 	kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
@@ -3397,8 +4329,9 @@
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
 	cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
-	home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
-	kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+	home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+	kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
+	use=xterm+kbs,
 
 xterm-noapp|xterm with cursor keys in normal mode,
 	rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
@@ -3411,25 +4344,202 @@
 xterm|xterm terminal emulator (X Window System),
 	use=xterm-new,
 
-# These entries allow access to the X titlebar and icon name as a status line.
-# Note that twm (and possibly window managers descended from it such as tvtwm,
-# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
-# with it.
+# This entry assumes that xterm's handling of VT100 SI/SO is disabled by
+# setting the vt100Graphics resource to false.
+xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode,
+	U8#1, use=xterm,
+
+# These building-blocks allow access to the X titlebar and icon name as a
+# status line.  There are a few problems in using them in entries:
+#
+# a) tsl should have a parameter to denote the column on which to transfer to
+#    the status line.
+# b) the "0" code for xterm updates both icon-title and window title.  Some
+#    window managers such as twm (and possibly window managers descended from
+#    it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you
+#    don't want to mess with icon-name when using those window managers.
+#
+# The extension "TS" is preferable, because it does not accept a parameter.
+# However, if you are using a non-extended terminfo, "TS" is not visible.
 xterm+sl|access X title line and icon name,
 	hs,
-	wsl#40,
-	dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
+	dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;,
 xterm+sl-twm|access X title line (pacify twm-descended window managers),
 	hs,
-	wsl#40,
-	dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
+	dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;,
+
+# In contrast, this block can be used for a DEC vt320 and up.  There are two
+# controls used.
+#
+# DECSASD (select active status display)
+#	\E[0$}	Main display
+#	\E[1$}	Status line
+#
+# DECSSDT (select status line type)
+#	\E[0$~	No status line
+#	\E[1$~	Indicator status line
+#	\E[2$~	Host-writable status line
+#
+# The building block assumes that the terminal always shows something at the
+# status line (either the indicator, or status line).  That is because if no
+# status line is used, then the terminal makes that line part of the user
+# window, changing its size without notice.
+#
+# Because there is no "esl" (enable status line) capability, the "tsl"
+# capability ensures that the status line is host-writable.  A DEC terminal
+# will clear the status line when changing from indicator to host-writable
+# mode.
+#
+# Once on the status line, the row part of cursor addressing is ignored.  Since
+# tsl expects a parameter (to specify the column), the shortest addressing that
+# can be used for this purpose is HPA, e.g., \E[5d to go to column 5.
+#
+dec+sl|DEC VTxx status line,
+	eslok, hs,
+	dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
 
 #
 # The following xterm variants don't depend on your base version
 #
 # xterm with bold instead of underline
 xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
+	sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;m,
 	smso=\E[7m, smul=\E[1m, use=xterm-old,
+
+# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
+xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
+	ich@, ich1@, use=xterm,
+# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
+xterm1|xterm terminal emulator ignoring the alternate screen buffer,
+	rmcup@, smcup@, use=xterm,
+
+#### XTERM Mouse
+# The xterm mouse protocol is used by other terminal emulators.
+# In this section, two extended capabilities are used to illustrate the mouse
+# protocol: XM and xm.  The "XM" capability is recognized by ncurses to allow
+# enabling/disabling other mouse protocols.  The "xm" capability describes the
+# mouse response; currently there is no interpreter which would use this
+# information to make the mouse support completely data-driven.
+
+# Here is the "original" xterm mouse protocol.
+#
+# First seen in X10.3, February 1986, this likely dates from 1985 based on the
+# copyright dates in the sources.  A comment in charproc.c notes "MIT bogus
+# sequence", referring to the fact that it does not correspond to a "real"
+# terminal.  The mouse responses for the X10 protocol are sent only for
+# button-presses.
+xterm+x10mouse|X10 xterm mouse protocol,
+	kmous=\E[M, XM=\E[?9%?%p1%{1}%=%th%el%;,
+	xm=\E[M%p3%' '%+%c%p2%'!'%+%c%p1%'!'%+%c,
+xterm-x10mouse|X10 xterm mouse,
+	use=xterm+x10mouse, use=xterm,
+
+# Here is the conventional xterm mouse protocol, introduced with X11R1 in
+# September 1987.
+#
+# The mouse responses for the X11 protocol covered button releases, as well as
+# modifiers:
+#  shift    4
+#  alt/meta 8 (technically the "mod1" mask, because X11 has no such keys)
+#  control 16
+#
+# The modifiers are not reflected in this description because as used in xterm
+# they are normally inaccessible because the translations resources assign
+# shift and control to other features.  However, they are important because
+# they take up space in the first byte of the response.  The other bits of this
+# byte are used to encode the button number for both presses and releases.
+# In the X11 protocol, any button-release is encoded with "3" (the lowest 2
+# bits in the byte).  Later work on XFree86 xterm used the remaining 3 bits to
+# provide additional features, e.g., wheel mouse.
+#
+# X11R1's xterm also supported an "emacs" mouse protocol, with final character
+# "t" or "T", which was activated by double-clicking.  The "t" response was
+# used when the starting/ending positions were the same.
+#
+# X11R3 (February 1988) added the highlight/tracking mode.
+#
+# X11R4 (December 1989) added the control sequences document, listing the
+# control sequences for the X10/X11 protocols without descriptions.  It also
+# mentioned the "emacs" ("T") response.  Comments in button.c referred to the
+# X11 protocol as "DEC vt200 compatible", although DEC offered no such terminal.
+#
+# X11R5 (November 1993) gave a description of the mouse protocol.
+#
+# X11R6 (January 1995) moved the control sequences document out of the xterm
+# source-directory to xc/doc/specs/xterm, polishing the formatting but adding
+# no new information.
+xterm+x11mouse|X11 xterm mouse protocol,
+	kmous=\E[M, XM=\E[?1000%?%p1%{1}%=%th%el%;,
+	xm=\E[M%?%p4%t3%e%p3%' '%+%c%;%p2%'!'%+%c%p1%'!'%+%c,
+xterm-x11mouse|X11 mouse,
+	use=xterm+x11mouse, use=xterm,
+
+# Here is a suggested description of the xterm highlighting protocol.
+# A more complicated example could be constructed to account for the "t"
+# response.
+xterm+x11hilite|X11 xterm mouse protocol with highlight,
+	kmous=\E[M, XM=\E[?1001%?%p1%{1}%=%th%el%;,
+	xm=\E[%p7%'!'%+%p6%'!'%+%c%p9%'!'%+%c%p8%'!'%+%c%p2%'!'%+%c%p1%'!'%+%cT,
+xterm-x11hilite|X11 mouse with highlight,
+	use=xterm+x11mouse, use=xterm,
+
+# The preceding were the sources from X Consortium.  Other sources (or patches)
+# were available.  Starting in mid-1995, XFree86 developers collected some of
+# those changes and began improvements, e.g., to support color.  This was, by
+# the way, around the same time that rxvt developers began implementing color,
+# though dates (and attributions) are not well documented.  I became interested
+# in xterm in late 1995, and involved in early 1996.  To complete the picture,
+# CDE's dtterm was introduced around the same time, with no mouse protocol -TD
+
+# xterm patch #83 (1998/10/7), added Jason Bacon's changes to provide an
+# "any-event" mouse mode.
+xterm+sm+1002|xterm any-event mouse,
+	kmous=\E[M, XM=\E[?1002%?%p1%{1}%=%th%el%;,
+xterm-1002|xterm any-event mouse,
+	use=xterm+sm+1002, use=xterm,
+
+xterm+sm+1003|testing xterm-mouse,
+	kmous=\E[M, XM=\E[?1003%?%p1%{1}%=%th%el%;,
+
+xterm-1003|testing xterm-mouse,
+	use=xterm+sm+1003, use=xterm,
+
+# xterm patch #116 (1999/9/25) added Stephen P Wall's changes to support DEC
+# locator mode.
+
+# xterm patch #120 (1999/10/28) added my change to support wheel mouse, by
+# dropping support for the X11 mouse protocol's shift-modifier and using
+# available bits in the first byte of the response to encode buttons 4 and 5.
+# xterm patch #126 (2000/2/8) amended that change to avoid conflicting with
+# older configurations which might have used the obsolete modifiers.
+
+# xterm patch #262 (2010/8/30) added Ryan Johnson's changes to provide a mode
+# where the coordinates in the mouse response would be encoded in UTF-8,
+# thereby extending the range of coordinates past 222=(255-33).  This is the
+# "1005" mouse mode.
+xterm+sm+1005|xterm UTF-8 mouse,
+	kmous=\E[M, XM=\E[?1005;1000%?%p1%{1}%=%th%el%;,
+	xm=\E[M%?%p4%t3%e%p3%' '%+%c%;%p2%'!'%+%u%p1%'!'%+%u,
+xterm-1005|xterm UTF-8 mouse,
+	use=xterm+sm+1005, use=xterm,
+
+# xterm patch #277 (2012/1/7) provides a mode where the mouse response uses
+# SGR-style parameters.
+#
+# Someone stated that the 1005 mouse mode would not be handled properly in luit.
+# (By the way, this is a problem with the X11 protocol).  A more plausible
+# criticism is that the responses provided by the 1005 mode are not distinct
+# from the non-1005 responses.
+#
+# As an alternative (and fixing the longstanding limitation of X11 mouse
+# protocol regarding button-releases), I provided this:
+xterm+sm+1006|xterm SGR-mouse,
+	kmous=\E[<, XM=\E[?1006;1000%?%p1%{1}%=%th%el%;,
+	xm=\E[<%p1%d;%p2%d;%p3%d;%?%p4%tM%em%;,
+xterm-1006|xterm SGR-mouse,
+	use=xterm+sm+1006, use=xterm,
+
+#### KTERM
 # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
 # (kterm should not invoke DEC Graphics as the alternate character set
 #  -- Kenji Rikitake)
@@ -3437,7 +4547,7 @@
 #  -- MATSUMOTO Shoji)
 # kterm implements acsc via built-in table of X Drawable's
 kterm|kterm kanji terminal emulator (X window system),
-	eslok, hs,
+	eslok, hs, XT,
 	ncv@,
 	acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
 	csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
@@ -3447,12 +4557,51 @@
 	tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
 kterm-color|kterm-co|kterm with ANSI colors,
 	ncv@, use=kterm, use=ecma+color,
-# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
-xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
-	ich@, ich1@, use=xterm,
-# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
-xterm1|xterm terminal emulator ignoring the alternate screen buffer,
-	rmcup@, smcup@, use=xterm,
+
+#### Other XTERM
+# These (xtermc and xtermm) are distributed with Solaris.  They refer to a
+# variant of xterm which is apparently no longer supported, but are interesting
+# because they illustrate SVr4 curses mouse controls - T.Dickey
+xtermm|xterm terminal emulator (monocrome),
+	OTbs, am, km, mir, msgr, xenl,
+	btns#3, cols#80, it#8, lines#24,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+	el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
+	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
+	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
+	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
+	kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
+	kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
+	knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
+	rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
+	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+	sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
+	smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
+
+xtermc|xterm terminal emulator (color),
+	colors#8, ncv#7, pairs#64,
+	op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	use=xtermm,
+
+# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
+# Here's a termcap entry I've been using for xterm_color, which comes
+# with BSD/OS 2.0, and the X11R6 contrib tape too I think.  Besides the
+# color stuff, I also have a status line defined as the window manager
+# title bar. [I have translated it to terminfo -- ESR]
+xterm-pcolor|xterm with color used for highlights and status line,
+	wsl#40,
+	bold=\E[1;43m, rev=\E[7;34m,
+	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,
+	smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,
 
 # This describes the capabilities of color_xterm, an xterm variant from
 # before ECMA-64 color support was folded into the main-line xterm release.
@@ -3461,7 +4610,7 @@
 # The README's with the distribution also say that it supports SGR 21, 24, 25
 # and 27, but they are not present in the terminfo or termcap.
 color_xterm|cx|cx100|color_xterm color terminal emulator for X,
-	OTbs, am, km, mir, msgr, xenl,
+	OTbs, am, km, mir, msgr, xenl, XT,
 	cols#80, it#8, lines#65, ncv@,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
@@ -3500,6 +4649,32 @@
 	ncv@,
 	op=\E[m, use=xterm-r6, use=klone+color,
 
+# This entry describes an xterm with Sun-style function keys enabled
+# via the X resource setting "xterm*sunFunctionKeys:true"
+# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
+# The <kf13>...<kf20> keys are L3-L10.  We don't set <kf16=\E[197z>
+# because we want it to be seen as <kcpy>.
+# The <kf31>...<kf45> keys are R1-R15.  We treat some of these in accordance
+# with their Sun keyboard labels instead.
+# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
+xterm-sun|xterm with sunFunctionKeys true,
+	kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
+	kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
+	kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
+	kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
+	kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
+	kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
+	kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
+	kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
+	kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
+	kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
+	kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
+	kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
+	use=xterm-basic,
+xterms-sun|small (80x24) xterm with sunFunctionKeys true,
+	cols#80, lines#24, use=xterm-sun,
+
+#### GNOME (VTE)
 # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
 gnome-rh62|Gnome terminal,
 	bce,
@@ -3553,7 +4728,7 @@
 #
 # bce and msgr are repaired.
 gnome-rh90|GNOME Terminal,
-	bce, msgr,
+	bce, msgr, XT,
 	hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C,
 	kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g,
 	vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys,
@@ -3574,8 +4749,10 @@
 # of the keys (which more/less correspond to the termcap values), and will
 # interpret those according to the $TERM value, but others not in the
 # terminfo according to some constantly changing set of hacker guidelines -TD
-gnome-2007|GNOME Terminal snapshot 2.18.1,
+vte-2007|VTE in GNOME Terminal snapshot 2.18.1,
 	use=xterm+pcc2, use=gnome-fc5,
+gnome-2007|GNOME Terminal snapshot 2.18.1,
+	use=vte-2007,
 
 # GNOME Terminal 2.22.3 (2008 snapshot)
 #
@@ -3584,8 +4761,26 @@
 # vt220's behavior, which will make it less usable on a VMS system (unclear
 # what the intent of the developer is, since the NRC feature exposed in vttest
 # by this change does not work).
+vte-2008|VTE in GNOME Terminal snapshot 2.22.3,
+	use=vte+pcfkeys, use=vte-2007,
 gnome-2008|GNOME Terminal snapshot 2.22.3,
-	use=gnome+pcfkeys, use=gnome-2007,
+	use=vte-2008,
+
+# GNOME Terminal 3.6.0 (2012)
+# VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied
+# in ncurses).  It inherited from gnome-fc5, which broke the modified forms
+# of f1-f4 -TD
+#
+# Testing with tack shows that flash does not/has not worked -TD
+vte-2012|VTE 0.34.1,
+	ncv#16,
+	dim=\E[2m, flash@, invis=\E[8m, ritm=\E[23m,
+	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p5%t;2%;%?%p7%t;8%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;,
+	sitm=\E[3m, use=vte-2008,
+# Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has
+# 61 differences from a correct entry for gnome terminal.
+gnome-2012|GNOME Terminal 3.6.0,
+	use=vte-2012,
 
 # GNOME terminal may automatically use the contents of the "xterm" terminfo to
 # supply key information which is not built into the program.  With 2.22.3,
@@ -3603,7 +4798,7 @@
 #
 # The parameters with \EO (SS3) are technically an error, since SS3 should have
 # no parameters.  This appears to be rote copying based on xterm+pcc0.
-gnome+pcfkeys|gnome variation on xterm+pcfkeys,
+vte+pcfkeys|VTE's variation on xterm+pcfkeys,
 	kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R,
 	kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q,
 	kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P,
@@ -3611,13 +4806,25 @@
 	kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S,
 	kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R,
 	use=xterm+pcfkeys,
+gnome+pcfkeys|VTE's variation on xterm+pcfkeys,
+	use=vte+pcfkeys,
 
+# deprecated - use "vte" for newer versions
 gnome|GNOME Terminal,
-	use=gnome-2008,
+	use=vte-2012,
+
+# relevant changes were made in January 2014
+vte-2014|VTE 0.35.1,
+	use=xterm+pcfkeys, use=vte-2012,
+
+vte|VTE aka GNOME Terminal,
+	use=vte-2014,
 
 # palette is hardcoded...
+vte-256color|VTE with xterm 256-colors,
+	use=xterm+256color, use=vte,
 gnome-256color|GNOME Terminal with xterm 256-colors,
-	initc@, use=xterm+256color, use=gnome,
+	use=vte-256color,
 
 # XFCE Terminal 0.2.5.4beta2
 #
@@ -3626,8 +4833,9 @@
 # Since most of the terminfo-related behavior is due to the VTE library,
 # the terminfo is the same as gnome-terminal.
 xfce|Xfce Terminal,
-	use=gnome,
+	use=vte-2008,
 
+#### Other GNOME
 # Multi-Gnome-Terminal 1.6.2
 #
 # This does not use VTE, and does have different behavior (compare xfce and
@@ -3635,6 +4843,7 @@
 mgt|Multi GNOME Terminal,
 	indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333,
 
+#### KDE
 # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
 # or not is debatable).
 kvt|KDE terminal,
@@ -3675,28 +4884,31 @@
 # Updated for konsole 1.6.6:
 #    add control-key modifiers for function-keys, etc.
 #
+# Updated for konsole 2.12.4:
+#    add sitm/ritm
+#
 # vttest menu 1 shows that both konsole and gnome terminal do wrapping
 # different from xterm (and vt100's).  They have the same behavior in this
 # detail, but it is unclear which copies the other.
 konsole-base|KDE console window,
-	bce, km@, npc,
+	bce, km@, npc, XT,
+	ncv@,
 	bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h,
 	ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l,
-	hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1@,
+	hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~,
 	kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@,
 	kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
-	kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l,
-	rmso=\E[27m, rmul=\E[24m,
+	kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, ritm=\E[23m,
+	rmam=\E[?7l, rmso=\E[27m, rmul=\E[24m,
 	rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
 	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
-	sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd,
+	sgr0=\E[0m\017, sitm=\E[3m, smam=\E[?7h, vpa=\E[%i%p1%dd,
 	use=ecma+color, use=xterm-r6,
 konsole-linux|KDE console window with linux keyboard,
-	kdch1=\E[3~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
-	kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, kf18@, kf19@,
-	kf2=\E[[B, kf20@, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
-	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
-	use=konsole-base,
+	kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@,
+	kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@,
+	kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+	kf8=\E[19~, kf9=\E[20~, use=konsole-base,
 konsole-solaris|KDE console window with Solaris keyboard,
 	kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100,
 # KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather
@@ -3730,7 +4942,21 @@
 
 # palette is hardcoded...
 konsole-256color|KDE console window with xterm 256-colors,
-	initc@, use=xterm+256color, use=konsole,
+	use=xterm+256setaf, use=konsole,
+
+#### MLTERM
+# http://mlterm.sourceforge.net/
+
+mlterm|multi lingual terminal emulator,
+	use=mlterm3,
+
+# Tested mlterm 3.2.2:
+# mlterm 3.x has made changes, but they are not reflected in the included
+# mlterm.ti; this entry is based on testing with tack and vttest -TD
+mlterm3|multi lingual terminal emulator,
+	kf1=\E[11~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
+	ritm=\E[23m, sitm=\E[3m, use=xterm+app, use=xterm+pcf0,
+	use=xterm+pcc2, use=xterm+pce2, use=mlterm2,
 
 # This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD
 #
@@ -3751,8 +4977,8 @@
 #	control/alt		kf1 to kf12	\E[11;7~ to \E[24;7~
 #	control/shift/alt	kf1 to kf12	\E[11;8~ to \E[24;8~
 #
-mlterm|multi lingual terminal emulator,
-	am, eslok, km, mc5i, mir, msgr, npc, xenl,
+mlterm2|multi lingual terminal emulator,
+	am, eslok, km, mc5i, mir, msgr, npc, xenl, XT,
 	colors#8, cols#80, it#8, lines#24, pairs#64,
 	acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
@@ -3794,6 +5020,10 @@
 	kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
 	kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
 
+mlterm-256color|mlterm 3.0 with xterm 256-colors,
+	use=xterm+256color, use=mlterm,
+
+#### RXVT
 # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
 # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
 # Notes:
@@ -3816,7 +5046,7 @@
 # removed dch/dch1 because they are inconsistent with bce/ech -TD
 # remove km as per tack test -TD
 rxvt-basic|rxvt terminal base (X Window System),
-	OTbs, am, bce, eo, mir, msgr, xenl, xon,
+	OTbs, am, bce, eo, mir, msgr, xenl, xon, XT,
 	cols#80, it#8, lines#24,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
@@ -3934,13 +5164,32 @@
 	kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
 	kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
 	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
-	kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
-	kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
-	kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
-	kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
-	kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
-	kUP=\E[a, kUP5=\EOa,
+	kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
+	kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
+	kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
+	kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
+	kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
+	kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
 
+# rxvt was originally "xvt", first announced in April 1993:
+#	http://www.informatica.co.cr/linux-desktops/research/1993/0416.html
+#
+# Though its change-log does not mention this, John Davis has stated that he
+# was the author of the changes to use the bce ("new color model") which was
+# incorporated into rxvt 2.11 (June 15, 1995).  The change-log does not give
+# dates, nor give developer's names.  Initial color support was added for rxvt
+# "2.0", which was sometime in 1994.
+#
+# rxvt had usable color support with 2.16 (April 2, 1996), with some help by my work on
+# vttest, as well as bug reports to Mark Olesen.  For instance, the fix
+# mentioned here
+#	http://web.archiveorange.com/archive/v/6ETvLb5wHtbbzCaS4S9J
+# was from one of my bug-reports -TD
+#
+# While the color model both for xterm and rxvt was based on Linux console,
+# Olesen (or possibly Davis) diverged in one respect from Linux's bce color
+# behavior: inserting/deleting characters does not fill the newly empty cell
+# with the default background color.
 rxvt|rxvt terminal emulator (X Window System),
 	ncv@,
 	hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
@@ -3954,24 +5203,53 @@
 rxvt-xpm|rxvt terminal emulator (X Window System),
 	use=rxvt,
 rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin,
-	acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+	acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
 	use=rxvt,
 rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin,
-	acsc=0\333+\257\,\256-\^`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
+	acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376,
 	use=rxvt-cygwin,
 
 # This variant is supposed to work with rxvt 2.7.7 when compiled with
 # NO_BRIGHTCOLOR defined.  rxvt needs more work...
-rxvt-16color|xterm with 16 colors like aixterm,
+rxvt-16color|rxvt with 16 colors like aixterm,
 	ncv#32, use=ibm+16color, use=rxvt,
 
-# mrxvt 0.5.3
+#### MRXVT
+# mrxvt 0.5.4
 #
 # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
 # makes its function-keys different from other flavors of rxvt -TD
+#
+# Testing with tack:
+# +	made custom description (below) to work, though it sets TERM=xterm.
+#
+# Testing with vttest:
+# +	While "based on" rxvt, some of the basic functionality is broken.  The
+#	window collapses to a single line when running several of the screens
+#	in vttest, e.g., the tests for cursor movement, screen features,
+#	double-sized characters.
+# +	The vt52 test works properly, but this is an exception.  Due to the
+#	other bug(s) most of vttest is untestable.
+# +	the color test using ECH shows a gap in the bce model, like rxvt.
+#
+# Testing with xterm "vttest" scripts:
+# +	resize.pl does not work because mrxvt does implement CSI 18 t
+#	(not in rxvt, but not documented by mrxvt) but not CSI 19 t.
+# +	none of the "dynamic colors" (OSC colors) scripts work.
 mrxvt|multitabbed rxvt,
-	use=xterm+pcc2, use=xterm+r6f2, use=rxvt,
+	XT,
+	kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
+	kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
+	kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
+	kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
+	kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
+	kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
+	use=rxvt,
 
+mrxvt-256color|multitabbed rxvt with 256 colors,
+	use=xterm+256color, use=mrxvt,
+
+#### ETERM
 # From: Michael Jennings <mej@valinux.com>
 #
 # Eterm 0.9.3
@@ -3983,7 +5261,7 @@
 # remove nonworking flash -TD
 # remove km as per tack test -TD
 Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
-	am, bce, bw, eo, mc5i, mir, msgr, xenl, xon,
+	am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT,
 	btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
@@ -4017,10 +5295,13 @@
 Eterm-88color|Eterm with 88 colors,
 	use=xterm+88color, use=Eterm,
 
+#### ATERM
 # Based on rxvt 2.4.8, it has a few differences in key bindings
 aterm|AfterStep terminal,
+	XT,
 	kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt,
 
+#### XITERM
 # xiterm  0.5-5.2
 # This is not based on xterm's source...
 # vttest shows several problems with keyboard, cursor-movements.
@@ -4029,48 +5310,8 @@
 	km@,
 	kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6,
 
-# These (xtermc and xtermm) are distributed with Solaris.  They refer to a
-# variant of xterm which is apparently no longer supported, but are interesting
-# because they illustrate SVr4 curses mouse controls - T.Dickey
-xtermm|xterm terminal emulator (monocrome),
-	OTbs, am, km, mir, msgr, xenl,
-	btns#3, cols#80, it#8, lines#24,
-	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
-	bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
-	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
-	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
-	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
-	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
-	el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
-	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
-	il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
-	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
-	kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
-	kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
-	knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
-	rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
-	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
-	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
-	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
-	sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
-	smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
 
-xtermc|xterm terminal emulator (color),
-	colors#8, ncv#7, pairs#64,
-	op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
-	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
-	use=xtermm,
-
-# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
-# Here's a termcap entry I've been using for xterm_color, which comes
-# with BSD/OS 2.0, and the X11R6 contrib tape too I think.  Besides the
-# color stuff, I also have a status line defined as the window manager
-# title bar. [I have translated it to terminfo -- ESR]
-xterm-pcolor|xterm with color used for highlights and status line,
-	bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
-	smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
-
+#### HPTERM
 # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
 # from BSD termcap.  (hpterm:  added empty <acsc>, we have no idea what ACS
 # chars look like --esr)
@@ -4103,31 +5344,7 @@
 	initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI,
 	op=\E&v0S, scp=\E&v%p1%dS, use=hpterm,
 
-# This entry describes an xterm with Sun-style function keys enabled
-# via the X resource setting "xterm*sunFunctionKeys:true"
-# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
-# The <kf13>...<kf20> keys are L3-L10.  We don't set <kf16=\E[197z>
-# because we want it to be seen as <kcpy>.
-# The <kf31>...<kf45> keys are R1-R15.  We treat some of these in accordance
-# with their Sun keyboard labels instead.
-# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
-xterm-sun|xterm with sunFunctionKeys true,
-	kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
-	kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
-	kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
-	kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z,
-	kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z,
-	kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z,
-	kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z,
-	kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z,
-	kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z,
-	kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
-	kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
-	kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
-	use=xterm-basic,
-xterms-sun|small (80x24) xterm with sunFunctionKeys true,
-	cols#80, lines#24, use=xterm-sun,
-
+#### EMU
 # This is for the extensible terminal emulator on the X11R6 contrib tape.
 # It corresponds to emu's internal emulation:
 #	emu -term emu
@@ -4140,7 +5357,7 @@
 	acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
 	bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
 	cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
-	cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED,
+	cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC,
 	cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA,
 	dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;,
 	ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I,
@@ -4189,6 +5406,8 @@
 	sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
 	sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=,
 	smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
+
+#### MVTERM
 # A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI,
 # print interface, ANSI X3.64 colour escape sequences, etc.  Newsgroup postings
 # indicate that it emulates more than one terminal, but incompletely.
@@ -4223,7 +5442,7 @@
 	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
 	tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys,
 
-### MTERM
+#### MTERM
 #
 # This application is available by email from <mouse@Rodents.Montreal.QC.CA>.
 #
@@ -4285,6 +5504,33 @@
 	smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR,
 	u7=\E[6n, vpa=\E[%i%p1%dd,
 
+#### VWM
+# http://vwm.sourceforge.net/
+#
+# VWM 2.0.2 (2009-05-01)
+# vwmterm is a terminal emulator written for the VWM console window manager.
+# This version is obsolete, replaced by libvterm in 2.1.0 (2009-10-23).
+vwmterm|(vwm term),
+	am, bce, ccc, mir, msgr, npc, xenl, xon,
+	colors#8, pairs#64,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
+	clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD,
+	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+	cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K,
+	home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D,
+	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
+	kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~,
+	kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
+	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m,
+	rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec,
+	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+	sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h,
+	smcup=\E[?1049h, smso=\E[3m, smul=\E[4m,
+
 #### MGR
 #
 # MGR is a Bell Labs window system lighter-weight than X.
@@ -4319,6 +5565,264 @@
 	kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
 	khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
 
+#### SIMPLETERM
+# st.suckless.org
+# st-0.4.1
+#
+# This version uses a table which supports a single modifier (a subset of
+# xterm's keys, using the same scheme).  Because it supports only a single
+# modifier in this table, function keys f36-f48 are normally unavailable
+# because they are assigned to modifier-4.
+#
+# The program assigns TERM to match the program name (the upstream source says
+# "st", but Debian renames it to "stterm").
+#
+# The source includes two entries which are not useful here:
+#	st-meta| simpleterm with meta key,
+#	st-meta-256color| simpleterm with meta key and 256 colors,
+# because st's notion of "meta" does not correspond to the terminfo definition.
+# Rather, it acts like xterm - when the meta feature is disabled.
+#
+# Removed invis -TD
+# Added eo, removed ul -TD
+#
+# Reviewed st 0.5:
+# implements control-modifier, but not control-shift for special keys
+# implements alt-modifier, but not alt-shift for special keys
+st|stterm| simpleterm 0.4.1,
+	am, bce, eo, hs, mir, msgr, xenl,
+	colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
+	clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
+	dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
+	enacs=\E)0, flash=\E[?5h\E[?5l, fsl=^G, home=\E[H,
+	hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+	il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
+	is2=\E[4l\E>\E[?1034l, kDC=\E[3;2~, kEND=\E[1;2F,
+	kHOM=\E[1;2H, kIC=\E[2;2~, kLFT=\E[1;2D, kNXT=\E[6;2~,
+	kPRV=\E[5;2~, kRIT=\E[1;2C, ka1=\E[1~, ka3=\E[5~, kb2=\EOu,
+	kbs=\177, kc1=\E[4~, kc3=\E[6~, kcbt=\E[Z, kclr=\E[3;5~,
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+	kdch1=\E[3~, kdl1=\E[3;2~, ked=\E[1;5F, kel=\E[1;2F,
+	kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
+	kf12=\E[24~, kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R,
+	kf16=\E[1;2S, kf17=\E[15;2~, kf18=\E[17;2~,
+	kf19=\E[18;2~, kf2=\EOQ, kf20=\E[19;2~, kf21=\E[20;2~,
+	kf22=\E[21;2~, kf23=\E[23;2~, kf24=\E[24;2~,
+	kf25=\E[1;5P, kf26=\E[1;5Q, kf27=\E[1;5R, kf28=\E[1;5S,
+	kf29=\E[15;5~, kf3=\EOR, kf30=\E[17;5~, kf31=\E[18;5~,
+	kf32=\E[19;5~, kf33=\E[20;5~, kf34=\E[21;5~,
+	kf35=\E[23;5~, kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q,
+	kf39=\E[1;6R, kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~,
+	kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
+	kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
+	kf48=\E[24;6~, kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q,
+	kf51=\E[1;3R, kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~,
+	kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~,
+	kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~,
+	kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~,
+	kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+	kil1=\E[2;5~, kind=\E[1;2B, kmous=\E[M, knp=\E[6~,
+	kpp=\E[5~, kri=\E[1;2A, krmir=\E[2;2~, op=\E[39;49m,
+	rc=\E8, rev=\E[7m, ri=\EM, ritm=\E[23m, rmacs=\E(B,
+	rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+	rmul=\E[m, rs1=\Ec, rs2=\E[4l\E>\E[?1034l, sc=\E7,
+	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
+	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
+	sgr0=\E[0m, sitm=\E[3m, smacs=\E(0, smcup=\E[?1049h,
+	smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
+	tbc=\E[3g, tsl=\E]0;, u6=\E[%i%d;%dR, u7=\E[6n,
+	u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd,
+#
+# st-0.1.1
+#
+# Note:  the original terminfo description uses leading blank to persuade
+# ncurses to use "st" as its name.  Proper fix for that is to use "st" as an
+# alias.
+#
+# Reading the code shows it should work for aixterm 16-colors
+# - added st-16color
+#
+# Using tack:
+# - set eo (erase-overstrike)
+# - set xenl
+# - tbc doesn't work
+# - hts works
+# - cbt doesn't work
+# - shifted cursor-keys send sequences like rxvt
+# - sgr referred to unimplemented "invis" mode.
+# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis
+simpleterm|old-st| simpleterm 0.1.1,
+	am, eo, mir, msgr, ul, xenl,
+	colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64,
+	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
+	cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+	cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
+	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@,
+	il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+	kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8,
+	rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7,
+	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
+	sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m,
+st-16color|stterm-16color|simpleterm with 16-colors,
+	use=ibm+16color, use=st,
+# 256 colors "works", but when running xterm's test-scripts, some garbage is
+# shown in the titlebar.
+#
+# terminal wants to use TERM=stterm-256color, but that is longer than 14
+# characters, making the choice nonportable.
+st-256color|stterm-256color|simpleterm with 256 colors,
+	use=xterm+256color, use=st,
+
+#### TERMINATOR
+# https://code.google.com/p/jessies/
+# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit
+# Debian/current -TD (2011/8/20)
+#
+# There are some packaging problems:
+# a) using Java, the program starts off using 50Mb, and climbs from there,
+#    up to 114Mb after testing (no scrollback).
+# b) it insists on reinstalling its terminal description in $HOME/.terminfo
+#    (two copies, just in case the host happens to be Mac OS X).
+#    I deleted this after testing with tack.
+#
+# Issues/features found with tack:
+# a) tbc does not work (implying that hts also is broken).
+#    Comparing with the tabs utility shows a problem with the last tabstop on
+#    a line.
+# b) has xterm-style shifted function-key strings
+#    meta also is used, but control is ignored.
+# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta)
+# d) some combinations of shift/control send xterm-style sequences for
+#    insert/delete/home/end.
+# e) numeric keypad sends only numbers (compare with vttest).
+# f) meta mode (km) is not implemented.
+#
+# Issues found with ncurses test-program:
+# a) bce is inconsistently implemented
+# b) widths of Unicode values above 256 do not always agree with wcwidth.
+#
+# Checked with vttest, found low degree of compatibility there.
+#
+# Checked with xterm's scripts, found that the 256-color palette is fixed.
+#
+# Fixes:
+# a) add sgr string
+# b) corrected sgr0 to reset alternate character set
+# c) modified smacs/rmacs to use SCS rather than SI/SO
+# d) removed bce
+# e) removed km
+terminator|Terminator no line wrap,
+	eo, mir, msgr, xenl, xon,
+	colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767,
+	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
+	bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
+	cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+	enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG,
+	ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
+	is1=\E[?47l\E=\E[?1l,
+	is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+	kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
+	kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+	op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B,
+	rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+	rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
+	rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
+	s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm,
+	setaf=\E[38;5;%p1%dm,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
+	sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h,
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd,
+	use=xterm+sl-twm,
+
+#### TERMINOLOGY
+# http://enlightenment.org
+#
+# Tested terminology-0.3.0, 0.6.1, using tack and vttest.  This is not a vt100
+# emulator, nor is it compatible with xterm, but it uses a few features from
+# both -TD
+#
+# General comments:
+#	cursor does not fill on focus
+#	there are pervasive problems with clearing/erasing parts of the screen
+#	resizing the window causes it to stop listening to the keyboard
+# tack -
+#	doesn't understand vt100 CPR needed for resize
+#	no CBT
+#	no cvvis
+#	has invis
+#	no blink
+#	uses bce model for colors, but (see below) fails the vttest screens
+#	has partial support for 256color feature.
+#	tack function-keys (a subset of xterm+pcf0), and
+#	tack cursor-keys (a subset of xterm+pce2):
+#			ctrl+shift (ignored)
+#		2	shift
+#			shift-alt modifier -> shift (2)
+#		3	alt
+#		4
+#		5	ctrl
+#	tack modifiers did not work for fkeys in 0.3.0; subset works in 0.6.1
+#	ctrl + khome/kend works - none of the other modifiers do
+# vttest -
+#	spits lots of messages from termptyesc.c especially in vttest.
+#	no 132-column mode
+#	fails menu 1, 2 (definitely not vt100-compatible)
+#	primary (claims vt420 with several options, apparently none work) and
+#	secondary report says (perhaps... vt420): \E[>41;285;0c
+#	CHA, HPR, VPA, CNL, CPL work
+#	BCE with ED/EL - fail
+#	BCE with ECH/indexing - fail
+#	SD/SU work
+#	unlike teken, background light/dark works
+#	can set title
+#	X10 and Normal mouse work
+#	Any-event mouse works
+#	Mouse button-event works
+#
+# This description uses xterm+pcf0, which is misleading because the program
+# does not handle combinations of modifiers - but listing them all would
+# involve more effort than its developers spent -TD
+terminology|EFL-based terminal emulator,
+	mc5i@, xon@,
+	blink@, ed@, el@, el1@, invis=\E[8m, kLFT=\E[1;2D,
+	kRIT=\E[1;2C, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	kind=\E[1;2B, kri=\E[1;2A,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
+	vpa=\E[%i%p1%dd, kDC3=\E[3;3~, kDC4=\E[3;4~,
+	kDC5=\E[3;5~, kDC6=\E[3;6~, kDC7=\E[3;7~, kDN=\E[1;2B,
+	kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, kDN6=\E[1;6B,
+	kDN7=\E[1;7B, kEND5=\E[1;5F, kHOM5=\E[1;5H,
+	kLFT3=\E[1;3D, kLFT4=\E[1;4D, kLFT5=\E[1;5D,
+	kLFT6=\E[1;6D, kLFT7=\E[1;7D, kRIT3=\E[1;3C,
+	kRIT4=\E[1;4C, kRIT5=\E[1;5C, kRIT6=\E[1;6C,
+	kRIT7=\E[1;7C, kUP=\E[1;2A, use=xterm+pcf0, use=vt100,
+	use=xterm+256setaf,
+
 ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
 #
 
@@ -4342,6 +5846,8 @@
 	cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
 	smso=\Ea$, smul=\Ea!, use=cbunix,
 
+#### Emacs
+
 # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
 eterm|gnu emacs term.el terminal emulation,
 	am, mir, xenl,
@@ -4357,6 +5863,28 @@
 	sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
 	smul=\E[4m,
 
+# The codes supported by the term.el terminal emulation in GNU Emacs 22.2
+eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
+	am, mir, msgr, xenl,
+	colors#8, cols#80, lines#24, pairs#64,
+	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
+	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
+	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+	el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
+	il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177,
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+	kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~,
+	knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m,
+	ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec,
+	sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm,
+	sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
+	sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
+	u6=\E[%i%d;%dR, u7=\E[6n,
+
+#### Screen
+
 # Entries for use by the `screen' program by Juergen Weigert,
 # Michael Schroeder, Oliver Laumann.  The screen and
 # screen-w entries came with version 3.7.1.  The screen2 and screen3 entries
@@ -4371,36 +5899,86 @@
 #      S0   (str)   Switch charset 'G0' to the specified charset.
 #      E0   (str)   Switch charset 'G0' back to standard charset.
 #
-# tested with screen 3.09.08
+# Initially tested with screen 3.09.08
+#
+# According to its manual page
+#
+#      Screen is a full-screen window manager that multiplexes a physical
+#      terminal between several processes (typically interactive shells).  Each
+#      virtual terminal provides the functions of a DEC VT100 terminal and, in
+#      addition, several control functions from the ISO 6429 (ECMA 48, ANSI
+#      X3.64) and ISO 2022 standards (e.g.  insert/delete line and support for
+#      multiple character sets).
+#
+# However, there is a design error in its support for video highlights.  The
+# program uses a table (rendlist) which equates the SGR codes to terminal
+# capabilities.  That, and color-decoding are hardcoded in screen; its behavior
+# is modified only by the presence or absence of the corresponding capabilities.
+# Not by their values.
+#
+# If screen sets the TERMCAP variable, it uses hardcoded strings which
+# correspond to the rendlist table.
+#
+# The table gives this information:
+#
+#	SGR	capability
+#	---	---------
+#	1	bold
+#	2	dim
+#	3	standout
+#	4	underline
+#	5	blink
+#	-	(unused 6)
+#	7	reverse
+#	-	(unused 8-21)
+#	22	reset bold, standout and dim
+#	23	reset standout
+#	24	reset underline
+#	25	reset blink
+#	-	(unused 26)
+#	27	reset reverse
+#
+# ECMA-48 differs from this: 3 and 23 set and reset italics, respectively.
+# ECMA-48 does not define "standout" - that is a termcap/terminfo abstraction.
+# Without some redesign of screen, it is not possible to extend the set of
+# capabilities.  Substitution would be possible, e.g., sending italics in
+# place of underline.
+#
+# Because screen uses hard-coded parsing, it does not check if two capabilities
+# use the same value.  For example, changing standout to be the same as any of
+# the other capabilities will confuse screen.  Curses applications which use
+# sgr are not impacted (because that usually resets all capabilities before
+# setting any), but termcap applications do not use sgr -TD
 screen|VT 100/ANSI X3.64 virtual terminal,
 	OTbs, OTpt, am, km, mir, msgr, xenl, G0,
-	colors#8, cols#80, it#8, lines#24, pairs#64,
+	colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1,
 	acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
 	clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
 	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
 	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
-	cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
-	dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
-	flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
-	il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z,
-	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
-	kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
+	cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
+	enacs=\E(B\E)0, flash=\Eg, home=\E[H, ht=^I, hts=\EH,
+	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0,
+	kbs=^H, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
+	kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~,
 	kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
 	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
 	khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
 	nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
 	rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m,
 	rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7,
-	sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+	sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;m%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h,
 	smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B,
 	S0=\E(%p1%c, use=ecma+color,
 # The bce and status-line entries are from screen 3.9.13 (and require some
 # changes to .screenrc).
 screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
-	bce, use=screen,
+	bce,
+	ech@, use=screen,
 screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
 	dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
 
@@ -4421,27 +5999,38 @@
 screen-16color-bce|GNU Screen with 16 colors and BCE,
 	use=ibm+16color, use=screen-bce,
 
-screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line,
+screen-16color-bce-s|GNU Screen with 16 colors using BCE and status line,
 	bce, use=ibm+16color, use=screen-s,
 
 # ======================================================================
 # Entries for GNU Screen 4.02 with --enable-colors256.
 
 screen-256color|GNU Screen with 256 colors,
-	ccc@,
-	initc@, use=xterm+256color, use=screen,
+	use=xterm+256setaf, use=screen,
 
 screen-256color-s|GNU Screen with 256 colors and status line,
-	ccc@,
-	initc@, use=xterm+256color, use=screen-s,
+	use=xterm+256setaf, use=screen-s,
 
 screen-256color-bce|GNU Screen with 256 colors and BCE,
-	ccc@,
-	initc@, use=xterm+256color, use=screen-bce,
+	bce, use=xterm+256setaf, use=screen-bce,
 
-screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line,
-	bce, ccc@,
-	initc@, use=xterm+256color, use=screen-s,
+screen-256color-bce-s|GNU Screen with 256 colors using BCE and status line,
+	bce, use=xterm+256setaf, use=screen-s,
+
+screen.xterm-256color|GNU Screen with xterm using 256 colors,
+	use=xterm+256setaf, use=screen.xterm-new,
+
+screen.konsole-256color|GNU Screen with konsole using 256 colors,
+	use=xterm+256setaf, use=screen.konsole,
+
+screen.vte-256color|GNU Screen with vte using 256 colors,
+	use=xterm+256setaf, use=screen.vte,
+
+screen.putty-256color|GNU Screen with putty using 256 colors,
+	use=xterm+256setaf, use=screen.putty,
+
+screen.mlterm-256color|GNU Screen with mlterm using 256 colors,
+	use=xterm+256setaf, use=screen.mlterm,
 
 # ======================================================================
 
@@ -4459,6 +6048,12 @@
 screen+fkeys|function-keys according to screen,
 	kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@,
 	khome=\E[1~, kslt@,
+
+# See explanation before "screen" entry.  Cancel italics so that applications
+# do not assume screen supports the feature.  Add this tweak to entries which
+# extend screen for terminals which do support italics.
+screen+italics|screen cannot support italics,
+	ritm@, sitm@,
 #
 # Here are a few customized entries which are useful -TD
 #
@@ -4479,8 +6074,10 @@
 screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm,
 	bce@, bw,
 	invis@, kIC@, kNXT@, kPRV@, meml@, memu@,
-	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
-	use=screen+fkeys, use=xterm-new,
+	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;m,
+	E3@, use=screen+italics, use=screen+fkeys, use=xterm-new,
+#:screen.xterm|screen for modern xterm,
+#:	use=screen.xterm-new,
 # xterm-r6 does not really support khome/kend unless it is propped up by
 # the translations resource.
 screen.xterm-r6|screen customized for X11R6 xterm,
@@ -4493,16 +6090,63 @@
 	use=screen+fkeys, use=screen,
 # Other terminals
 screen.rxvt|screen in rxvt,
-	bw,
+	bw, XT,
 	cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
 	kcuu1=\EOA, use=screen+fkeys, use=vt100+enq,
 	use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
+screen.Eterm|screen in Eterm,
+	use=screen+fkeys, use=Eterm,
+screen.mrxvt|screen in mrxvt,
+	use=screen+fkeys, use=mrxvt,
+screen.vte|screen in any VTE-based terminal,
+	use=screen+italics, use=screen+fkeys, use=vte,
+screen.gnome|screen in GNOME Terminal,
+	use=screen+italics, use=screen+fkeys, use=gnome,
+screen.konsole|screen in KDE console window,
+	use=screen+italics, use=screen+fkeys, use=konsole,
 # fix the backspace key
 screen.linux|screen in linux console,
 	bw,
 	kbs=\177, kcbt@, use=screen+fkeys, use=screen,
 screen.mlterm|screen in mlterm,
 	use=screen+fkeys, use=mlterm,
+screen.putty|screen in putty,
+	use=screen+fkeys, use=putty,
+
+# The default "screen" entry is reasonably portable, but not optimal for the
+# most widely-used terminal emulators.  The "bce" capability is supported in
+# screen since 3.9.13, and when used, will require fewer characters to be sent
+# to the terminal for updates.
+#
+# If you are using only terminals which support bce, then you can use this
+# feature in your screen configuration.
+#
+# Adding these lines to your ".screenrc" file will allow using these customized
+# entries:
+#	term screen-bce
+#	bce on
+#	defbce on
+screen-bce.xterm-new|screen optimized for modern xterm,
+	bce,
+	ech@, use=screen+italics, use=screen.xterm-new,
+screen-bce.rxvt|screen optimized for rxvt,
+	bce,
+	ech@, use=screen.rxvt,
+screen-bce.Eterm|screen optimized for Eterm,
+	bce,
+	ech@, use=screen.Eterm,
+screen-bce.mrxvt|screen optimized for mrxvt,
+	bce,
+	ech@, use=screen.mrxvt,
+screen-bce.gnome|screen optimized for GNOME-Terminal,
+	bce,
+	ech@, use=screen+italics, use=screen.gnome,
+screen-bce.konsole|screen optimized for KDE console window,
+	bce,
+	ech@, use=screen+italics, use=screen.konsole,
+screen-bce.linux|screen optimized for linux console,
+	bce,
+	ech@, use=screen.linux,
 
 screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
 	cols#132, use=screen,
@@ -4537,6 +6181,17 @@
 	sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
 	smul=\E[4m, tbc=\E[3g,
 
+# tmux is compatible with screen, but has support for italics, and some of the
+# xterm cursor bits.
+tmux|tmux terminal multiplexer,
+	ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m, Ms@,
+	use=xterm+sl, use=xterm+tmux, use=screen,
+
+tmux-256color|tmux with 256 colors,
+	use=xterm+256setaf, use=tmux,
+
+#### NCSA Telnet
+
 # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
 # NCSA telnet is one of the most used telnet clients for the Macintosh.  It has
 # been maintained until recently by the National Center for Supercomputer
@@ -4572,18 +6227,18 @@
 # sequences for setting the window-title.  So you must use tsl and fsl in
 # pairs, since the latter ends the string that is loaded to the window-title.
 ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
-	am, hs, km, mir, msgr, xenl,
+	am, km, mir, msgr, xenl,
 	acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
 	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
 	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
 	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
-	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
-	dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
-	flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
-	ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
-	il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
+	dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+	el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l,
+	home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
+	if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
+	ind=\n$<150*>,
 	is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
 	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
 	kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
@@ -4597,8 +6252,8 @@
 	rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
 	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
 	sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
-	smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
-	u8=\E[?62;1;6c, use=ansi+enq,
+	smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq,
 ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
 	use=ncsa-m, use=klone+color,
 ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
@@ -4716,10 +6371,10 @@
 	kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
 	kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
 	kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
-	knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
-	kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
-	sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
-	u8=\E[1t, u9=\E[11t,
+	kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z,
+	kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@,
+	rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m,
+	smso=\E[7m, u8=\E[1t, u9=\E[11t,
 # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
 # flake out on the last line.  Unfortunately, without them the terminal has no
 # way to scroll.
@@ -4729,6 +6384,10 @@
 sun|sun1|sun2|Sun Microsystems Inc. workstation console,
 	use=sun-il,
 
+sun+sl|Sun Workstation window status line,
+	hs,
+	dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l,
+
 # From: <john@ucbrenoir>  Tue Sep 24 13:14:44 1985
 sun-s|Sun Microsystems Workstation window with status line,
 	hs,
@@ -4762,15 +6421,33 @@
 # Most of the current references to sun-color are from users wondering why this
 # is the default on install.  Details from reading the wscons manpage, adding
 # cub, etc., here (rather than in the base sun-il entry) since it is not clear
-# when those were added -TD
+# when those were added -TD (2005-05-28)
+#
+# According to wscons manpage, color is supported only on IA systems.
+# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons
+# does not list these.  It also sets ncv#3, however that corresponds to
+# underline and standout.
+#
+# Since the documentation and terminfo do not agree, see also current code at
+# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c
+#
+# That (actually a different driver which "supports" sun-color) also supports
+# these features:
+#	vpa=\E[%i%p1%dd
+#	hpa=\E[%i%p1%d`
+#	cbt=\E[Z
+#	dim=\E[2m
+#	blink=\E[5m
+# It supports bold, but not underline -TD (2009-09-19)
 sun-color|Sun Microsystems Workstation console with color support (IA systems),
-	colors#8, pairs#64,
-	cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
-	cuu=\E[%p1%dA, home=\E[H, op=\E[m\E[p, setab=\E[4%p1%dm,
-	setaf=\E[3%p1%dm,
+	colors#8, ncv#3, pairs#64,
+	bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
+	cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s,
+	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
 	setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
 	setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
-	use=sun,
+	sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m,
+	smso=\E[7m, use=sun,
 
 #### Iris consoles
 #
@@ -4865,7 +6542,7 @@
 	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
 	ed=\E[J, el=\E[K, home=\E[H, ht=^I,
 	if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
-	is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
+	is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
 	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
 	kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
 	kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
@@ -4913,7 +6590,7 @@
 	cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
 	home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
-	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
 	kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
 	rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
 	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
@@ -4978,7 +6655,7 @@
 nwp511|nwp-511|nwp-511 vt100,
 	OTbs, OTpt, am, xenl,
 	cols#80, lines#24,
-	clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
+	clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
 	ed=\E[J$<30/>, el=\E[K$<3/>,
 	flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
@@ -5037,29 +6714,10 @@
 	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
 	smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
 
-#### Non-Unix Consoles
+######## Non-Unix Consoles
 #
 
-### EMX termcap.dat compatibility modes
-#
-# Keypad:	Home=\0G	Up=\0H	PrPag=\0I
-#		ka1,kh		kcuu1		kpp,ka3
-#
-#		Left=\0K	5=\0L		Right=\0M
-#		kcub1		kb2		kcuf1
-#
-#		End=\0O		Down=\0P	NxPag=\0Q
-#		kc1,kend	kcud1		kc3,knp
-#
-#		Ins=\0R		Del=\0S
-#		kich1		kdch1
-#
-# On keyboard with 12 function keys,
-#	shifted f-keys: F13-F24
-#	control f-keys: F25-F36
-#	alt f-keys:     F37-F48
-# The shift/control/alt keys do not modify each other, but alt overrides both,
-# and control overrides shift.
+#### EMX termcap.dat compatibility modes
 #
 # Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the
 # no_color_video to inform the application that standout(1), underline(2)
@@ -5067,19 +6725,7 @@
 emx-base|DOS special keys,
 	bce, bw,
 	it#8, ncv#71,
-	bel=^G, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
-	kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
-	kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
-	kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W,
-	kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\,
-	kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_,
-	kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d,
-	kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212,
-	kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l,
-	kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q,
-	kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B,
-	kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I,
-	use=ansi.sys,
+	bel=^G, use=ansi.sys,
 
 # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
 # a Unix-style environment used on OS/2.  (Note that the suffix makes some
@@ -5124,6 +6770,8 @@
 	kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
 	sgr0=\E[0m,
 
+#### Cygwin
+
 # Use this for cygwin32 (tested with beta 19.1)
 # underline is colored bright magenta
 # shifted kf1-kf12 are kf11-kf22
@@ -5210,7 +6858,7 @@
 	rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
 	rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R,
 	sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
+	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
 	sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h,
 	smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];,
 	vpa=\E[%i%p1%dd, use=vt102+enq,
@@ -5245,9 +6893,11 @@
 	rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
 	rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
 	setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
+	sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
 	sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
-	smul=\E[4m, tbc=\E[2g, vpa=\E[%i%p1%dd, use=vt102+enq,
+	smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
+
+#### DJGPP
 
 # Key definitions:
 # The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc.  match the
@@ -5415,6 +7065,8 @@
 	ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm,
 	setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
 
+#### U/Win
+
 # This is tested using U/Win's telnet.  Scrolling is omitted because it is
 # buggy.  Another odd bug appears when displaying "~" in alternate character
 # set (the emulator spits out error messages).  Compare with att6386 -TD
@@ -5438,6 +7090,8 @@
 	smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m,
 	smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
 
+#### Microsoft (miscellaneous)
+
 # This entry fits the Windows NT console when the _POSIX_TERM environment
 # variable is set to 'on'.  While the Windows NT POSIX console is seldom used,
 # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
@@ -5491,7 +7145,7 @@
 	ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
 	kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
 	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
-	rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
+	rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100,
 	ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
 	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
 	sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
@@ -5510,7 +7164,7 @@
 interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color,
 	am, bw, msgr,
 	colors#8, cols#80, lines#25, ncv#3, pairs#64,
-	acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
+	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
 	bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD,
 	cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
 	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
@@ -5536,7 +7190,7 @@
 	rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec,
 	sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
 	setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm,
-	sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[1m, smul=\E[4m,
+	sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m,
 
 opennt-35|ntconsole-35|OpenNT-term35 compatible with color,
 	lines#35, use=opennt,
@@ -5634,7 +7288,7 @@
 #	:cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
 #	:XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
 #	:HL=^AP\r:SP=\E[i:\
-#	:IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
+#	:IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:
 altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
 	blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
 altos4|alt4|altos-4|altos IV,
@@ -5849,7 +7503,7 @@
 	da, db,
 	lm#0, pb#19200,
 	ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
-	is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
+	is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr,
 	use=hp+labels, use=scrhp,
 
 # This entry is for sysline. It allocates a 23 line window with
@@ -6050,7 +7704,7 @@
 hp2622|hp2622a|hp 2622,
 	da, db,
 	lm#0, pb#19200,
-	is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
+	is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp,
 
 # The 2623 is a 2622 with extra graphics hardware.
 hp2623|hp2623a|hp 2623,
@@ -6208,10 +7862,10 @@
 hp9845|HP 9845,
 	OTbs, am, da, db, eo, mir, xhp,
 	cols#80, lines#21,
-	OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
-	cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
-	if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
-	smir=\EQ, smso=\E&dB,
+	OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+	cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
+	ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL,
+	rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
 # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
 # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
 # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
@@ -6463,10 +8117,10 @@
 	sgr0=\E(, smso=\E),
 adm21|lear siegler adm21,
 	xmc#1,
-	bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
-	ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
-	kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
-	use=adm3a,
+	bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=\ER$<30*>, ed=\EY,
+	el=\ET, ich1=\EQ, il1=\EE$<30*>, ind=^J, invis@, kbs=^H,
+	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
+	use=adm+sgr, use=adm3a,
 # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
 # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
 # removed bogus-looking \200 from before <cup>. -- esr)
@@ -6754,6 +8408,9 @@
 # What seems to be going on here is that this entry was designed so that
 # the normal highlight is bold and standout is dim plus something else
 # (reverse-video maybe?  But then, are there two <rev> sequences?)
+#
+# Added kdch1, kil1, kdl1 based on screenshot -TD:
+#	http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg
 qvt101+|qvt101p|qume qvt 101 PLUS product,
 	am, bw, hs, ul,
 	cols#80, lines#24, xmc#0,
@@ -6762,11 +8419,11 @@
 	dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
 	flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
 	ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
-	kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
-	kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
-	kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
-	khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
-	smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
+	kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
+	kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r,
+	kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
+	kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@,
+	rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
 qvt102|qume qvt 102,
 	cnorm=\E., use=qvt101,
 # (qvt103: added <rmam>/<smam> based on init string -- esr)
@@ -7878,8 +9535,8 @@
 	rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
 	rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
 	rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
-	sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
-	sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
+	sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;,
+	sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
 	smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
 	tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
 
@@ -8252,7 +9909,7 @@
 wy120|wyse120|wy150|wyse150|Wyse 120/150,
 	am, bw, hs, km, mc5i, mir, msgr, xon,
 	cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
-	acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+	acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
 	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
 	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
 	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
@@ -8331,7 +9988,7 @@
 wy60|wyse60|Wyse 60,
 	am, bw, hs, km, mc5i, mir, msgr,
 	cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
-	acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+	acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
 	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
 	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
 	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
@@ -8500,7 +10157,7 @@
 wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
 	am, bw, hs, km, mc5i, mir, msgr, xon,
 	cols#80, it#8, lines#25, wsl#46,
-	acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
+	acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
 	blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
 	cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
 	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
@@ -8552,7 +10209,7 @@
 wy160|wyse160|Wyse 160,
 	am, bw, hs, km, mc5i, mir, msgr,
 	cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
-	acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+	acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
 	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
 	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
 	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
@@ -8860,7 +10517,7 @@
 wy325|wyse325|Wyse epc,
 	am, bw, hs, mc5i, mir,
 	cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
-	acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
+	acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
 	bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
 	cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
 	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
@@ -9307,7 +10964,7 @@
 kermit|standard kermit,
 	OTbs,
 	cols#80, lines#24,
-	clear=\EE, cub1=^H, cuf1=\EC,
+	clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
 	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
 	el=\EK, home=\EH, is2=K0 Standard Kermit  9-25-84\n,
 	kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
@@ -9392,7 +11049,7 @@
 	flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
 	fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
 	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
-	is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
+	is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
 	kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
 	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
 	kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
@@ -9646,7 +11303,7 @@
 	pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
 	rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
 	sc=\E7,
-	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+	sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
 	tsl=\E7\E[25;%p1%{1}%+%dH,
 
@@ -9744,7 +11401,7 @@
 	pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
 	rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
 	rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
-	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+	sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
 	smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
 	tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
@@ -9792,14 +11449,14 @@
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
 	cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
-	cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
-	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
-	dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
-	dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
-	el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
-	hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
-	ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
-	invis=\E[8m,
+	cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
+	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A,
+	cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+	dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J,
+	el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
+	home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH,
+	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+	indn=\E[%p1%dE, invis=\E[8m,
 	is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
 	kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
 	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
@@ -9950,7 +11607,7 @@
 	rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
 	rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
 	rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
-	sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+	sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
 	smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
 	smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
@@ -9972,7 +11629,7 @@
 	bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
 	cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
 	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
-	cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
+	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP,
 	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
 	hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
 	il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
@@ -10000,7 +11657,7 @@
 	acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
 	civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
-	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
 	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
 	cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
 	dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
@@ -10033,7 +11690,7 @@
 	acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
 	clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
-	cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
+	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
 	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
 	cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
 	dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
@@ -10230,8 +11887,8 @@
 	kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
 	kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
 	kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
-	rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
-	xonc=e, use=att605,
+	rmsc=\E[50;0|$<400>, smsc=\E[?11l\E[50;1|$<250>,
+	xoffc=g, xonc=e, use=att605,
 att605-w|AT&T 605-w 132 column 102 key keyboard,
 	cols#132, wsl#132,
 	is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
@@ -10347,7 +12004,7 @@
 	ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
 	rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
 	rs2=\Ec\E[?3l, sc=\E7,
-	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
+	sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;,
 	sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
 	smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
 	tsl=\E7\E[25;%i%p1%dx,
@@ -10407,7 +12064,7 @@
 	mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
 	rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
 	rmul=\E[m, rs2=\Ec, sc=\E7,
-	sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
+	sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m,
 	sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
 att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
 	lines#24, use=att630,
@@ -11057,23 +12714,23 @@
 	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
 	rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
 	rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
-	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
+	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
 	sgr0=\E[m,
 	smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
-	smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
+	smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
 	vpa=\E[%p1%{1}%+%dd,
 
 aaa+rv|ann arbor ambassador in reverse video,
 	blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
 	is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
 	rs1=\E[H\E[7m\E[J$<156>,
-	sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+	sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016,
 	sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
 # Ambassador with the DEC option, for partial vt100 compatibility.
 aaa+dec|ann arbor ambassador in dec vt100 mode,
 	acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
 	csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
-	sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
+	sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
 	smacs=^O,
 aaa-18|ann arbor ambassador/18 lines,
 	lines#18,
@@ -11240,7 +12897,7 @@
 	blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
 	is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
 	rs1=\E[H\E[7m\E[J,
-	sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+	sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m,
 	sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
 
 #### Applied Digital Data Systems (adds)
@@ -11430,7 +13087,7 @@
 cit80|cit-80|citoh 80,
 	OTbs, am,
 	cols#80, lines#24,
-	clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
+	clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
 	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
 	ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
 	kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
@@ -11439,9 +13096,9 @@
 cit101|citc|C.itoh fast vt100,
 	OTbs, am, xenl,
 	cols#80, lines#24,
-	bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
-	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
-	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
+	bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+	cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
 	flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
 	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
 	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
@@ -11459,9 +13116,9 @@
 	OTbs, OTpt, am, mir, msgr,
 	cols#80, it#8, lines#24,
 	acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
-	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
-	cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
-	el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
+	cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH,
+	cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M,
+	ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
 	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
 	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
 	kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
@@ -12082,7 +13739,7 @@
 #	 and mc5= should use the \E[?4i and \E[?5i strings instead).
 
 hds200|Human Designed Systems HDS200,
-	am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+	am, bw, eslok, hs, km, mir, msgr, xenl, xon,
 	cols#80, it#8, lines#24, lm#0,
 	acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
 	blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
@@ -12111,13 +13768,12 @@
 	kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
 	kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
 	kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
-	mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
-	rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
-	rmul=\E[m\017, sc=\E7,
+	nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l,
+	rmso=\E[m\017, rmul=\E[m\017, sc=\E7,
 	sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
 	smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
-	vpa=\E[%i%p1%dd,
+	vpa=\E[%i%p1%dd, use=ansi+pp,
 
 # <ht> through <el> included to specify padding needed in raw mode.
 # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
@@ -12144,10 +13800,11 @@
 	ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
 	rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
 	sc=\E7,
-	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
-	sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
-	smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
-	tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
+	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>,
+	sgr0=\E[m\016$<1>, smacs=\017$<1>,
+	smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h,
+	smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+	vpa=\E[%p1%{1}%+%dd,
 avt-rv-ns|concept avt in reverse video mode/no status line,
 	flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
 	use=avt-ns,
@@ -12357,7 +14014,7 @@
 dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
 	bce, ccc,
 	colors#52, ncv#53, pairs#26,
-	initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
+	initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
 	oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
 	op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
 	scp=\036RG2%p1%02X,
@@ -12366,7 +14023,7 @@
 dg+ccc|Configurable color info for DG D430C terminals in DG mode,
 	bce, ccc,
 	colors#52, ncv#53, pairs#26,
-	initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
+	initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
 	oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
 	op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
 	scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
@@ -12402,11 +14059,11 @@
 dg210|dg-ansi|Data General 210/211,
 	am,
 	cols#80, lines#24,
-	OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
-	cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
-	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
-	nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
-	smul=\E[4;m,
+	OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+	home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m,
+	smso=\E[7;m, smul=\E[4;m,
 # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
 # courtesy of Carlos Rucalde of Vantage Software, Inc.
 # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
@@ -12414,7 +14071,7 @@
 dg211|Data General d211,
 	cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
 	kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
-	rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
+	rmso=\036E$<0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
 
 # dg450 from Cornell (not official)
 dg450|dg6134|data general 6134,
@@ -12429,7 +14086,6 @@
 # backspace on all terminals.  This is not so in DG mode.
 # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
 # grounds that there is no matching ":ml:"
-# fixed garbled ":k9=\E[00\:z:" capability -- esr)
 dg460-ansi|Data General Dasher 460 in ANSI-mode,
 	OTbs, am, msgr, ul,
 	cols#80, it#8, lines#24,
@@ -12440,10 +14096,12 @@
 	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
 	kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
 	kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
-	kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
-	lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
-	ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
-	smul=\E[4m,
+	kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2,
+	lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10,
+	mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05,
+	sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m,
+	sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR,
+	u7=\E[6n, u8=\E[5n, u9=\E[0n,
 # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
 # Data General 605x
 # Ought to work for a Model 6242, Type D210 as well as a 605x.
@@ -12490,7 +14148,7 @@
 	cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
 	el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
 	ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
-	sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
+	sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m,
 	sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
 
 # DASHER D210 series terminals in DG mode.
@@ -12692,7 +14350,7 @@
 	is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
 	ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
 	rs2=\E[4;0;2;1;1;1v\E(B\E)4,
-	sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
+	sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;,
 	sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
 
 # Initialization string 2 sets:
@@ -12862,12 +14520,12 @@
 #
 d470c|d470|Data General DASHER D470C,
 	is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
-	sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
+	sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;,
 	use=dg+color, use=d460,
 
 d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
 	is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
-	sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
+	sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;,
 	use=dg+color, use=d460-7b,
 
 # Initialization string 2 sets:
@@ -13278,7 +14936,7 @@
 go140|graphon go-140,
 	OTbs,
 	cols#80, it#8, lines#24,
-	clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
+	clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C,
 	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
 	ed=\E[J$<10/>, el=\E[K, ht=^I,
 	if=/usr/share/tabset/vt100, il1=\E[L,
@@ -13394,7 +15052,7 @@
 	smso=\E_1, smul=\E_0, tbc=\E3,
 sbi|superbee|beehive superbee at Indiana U.,
 	xsb,
-	cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
+	cr=\r$<1>, il1=\EN$<1>\EL$<9>\EQ \EP$<9> \EO\ER\EA,
 	use=sb1,
 # Alternate (older) description of Superbee - f1=escape, f2=^C.
 # Note: there are at least 3 kinds of superbees in the world.  The sb1
@@ -13423,7 +15081,7 @@
 sb2|sb3|fixed superbee,
 	xsb@, use=superbee,
 
-####  Beehive Medical Electronics
+#### Beehive Medical Electronics
 #
 # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
 # Regarding your question though; Beehive terminals weren't made by Harris.
@@ -13668,31 +15326,42 @@
 	sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
 # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
 # removed kend, knp, kpp -TD
+#
+# From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
+# Added ich1 (kich1 without ich1 doesn't make sense).
+# Added il1 (kil1 without il1 doesn't make sense).
+# Added xon (terminal uses XON/XOFF flow control).
+#
 ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
-	OTbs, am, mir, msgr,
+	OTbs, am, mir, msgr, xon,
 	cols#80, it#8, lines#24,
 	acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
 	bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
 	cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
-	cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
-	invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
-	kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
-	kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
-	kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
-	kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
-	kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
-	kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
-	kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
-	kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
-	ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
-	rmso=\E4@, rmul=\E4@,
+	cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
+	ich1=\EP \010, il1=\EN, ind=^J, invis=\E4P, kbs=^H, kcbt=\E2,
+	kclr=\EL\r, kctab=\E1, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+	kcuu1=\EA, kdch1=\EQ, kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r,
+	kf10=\Ej\r, kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r,
+	kf14=\E!b\r, kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r,
+	kf18=\E!f\r, kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r,
+	kf21=\E!i\r, kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r,
+	kf3=\Ec\r, kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r,
+	kf8=\Eh\r, kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010,
+	kil1=\EN, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
+	rmcup=\E>A, rmso=\E4@, rmul=\E4@,
 	sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
 	sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
 
 ibm3161-C|IBM 3161-C NLS terminal using cartridge,
 	rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
+#
+# From: Stephen Powell <zlinuxman@wowway.com> 23 Apr 2015
+# Deleted il1.  (il1 will now be inherited from ibm3161-C, which inherits
+# it from ibm3161.
+#
 ibm3162|IBM 3162 display,
-	blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
+	blink=\E4$a, bold=\E4(a, invis=\E40a, rev=\E4!a,
 	rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
 	use=ibm3161-C,
 
@@ -13890,6 +15559,8 @@
 	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
 	sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
 	tbc=\E[3g,
+# "Megapel" refers to the display adapter, which was used with the IBM RT
+# aka IBM 6150.
 ibm5081|hft|IBM Megapel Color display,
 	acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
 	s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
@@ -14244,7 +15915,7 @@
 	is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
 	rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
 	rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
-	sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
+	sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ,
 	sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
 icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
 	rs2=\Eo1, use=icl6404,
@@ -14274,9 +15945,9 @@
 intext2|intextii|INTERACTIVE modified owl 1251,
 	am, bw, ul,
 	cols#80, lines#24, xmc#0,
-	bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
-	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
-	dl1=\E[M, ed=\E[J, el=\E[K,
+	bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D,
+	cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
+	dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
 	flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
 	hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
 	kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
@@ -14561,7 +16232,7 @@
 # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
 #
 prism9|p9|P9|MDC Prism-9 in ANSII mode,
-	am, bw, hs, mc5i, msgr, xenl, xon,
+	am, bw, hs, msgr, xenl, xon,
 	cols#80, it#8, lines#24, vt#3, wsl#72,
 	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
 	clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
@@ -14577,14 +16248,15 @@
 	kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
 	kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
 	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
-	khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
-	prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
-	ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
+	khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z,
+	rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l,
+	rmso=\E[27m, rmul=\E[24m,
 	rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
 	sc=\E[%y,
-	sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
+	sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;,
 	sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
-	tbc=\E[2g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
+	tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
+	use=ansi+pp,
 
 # p9-w: Prism-9 in 132 column mode
 # --------------------------------
@@ -14948,7 +16620,7 @@
 	rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
 	rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
 	sc=\E7,
-	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
 	sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
 	smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
 	tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
@@ -15005,7 +16677,7 @@
 	rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
 	rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
 	sc=\E7,
-	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
 	sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
 	smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
 	tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
@@ -15061,7 +16733,7 @@
 	rmul=\E[24m,
 	rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
 	sc=\E7,
-	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
+	sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>,
 	sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
 	smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
 	tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
@@ -15451,14 +17123,14 @@
 # Manufactured in the early/mid eighties, behaves almost the same as a
 # Televideo 950.  Take a 950, change its cabinet for a more 80s-ish one (but
 # keep the same keyboard layout), add an optional 25-line mode, replace the DIP
-# switches with a menu and remove the "lock line" feature (ESC !  1 and ESC ! 
+# switches with a menu and remove the "lock line" feature (ESC !  1 and ESC !
 # 2), here is the NDR 9500.  Even the line-lock, albeit disabled, is
 # recognized:  if you type in "ESC !", the next (third) character is not
 # echoed, showing that the terminal was actually waiting for a parameter!
 ndr9500|nd9500|Newbury Data 9500,
 	am, bw, hs, mc5i, mir, msgr, ul, xon,
 	cols#80, lines#24, wsl#79,
-	acsc=qKnImAjDwNuLtMvOlBkCxJ, bel=^G, cbt=\EI, civis=\E.0,
+	acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0,
 	clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
 	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
 	dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
@@ -15475,7 +17147,7 @@
 	pfloc=\E|%{48}%p1%+%c2%p2\031,
 	pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej,
 	rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N,
-	sgr=\E%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
+	sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;,
 	sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O,
 	tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H,
 
@@ -15578,8 +17250,8 @@
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
 	cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
-	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
-	cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
+	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
+	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
 	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
 	dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
 	ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
@@ -15654,8 +17326,8 @@
 	cols#80, lines#24,
 	acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
 	clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
-	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
-	cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
+	csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
+	cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P,
 	dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
 	ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
 	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
@@ -15806,7 +17478,7 @@
 	OTbs, am, mir, msgr, ul, xenl, xt,
 	cols#79, it#8, lines#29,
 	acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
-	clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
+	clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C,
 	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
 	dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
 	il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
@@ -15925,6 +17597,15 @@
 	sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
 	smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
 
+# Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code:
+# 0 selects Tek mode, i.e., \E%!0
+# 1 selects ANSI mode
+# 2 selects ANSI edit-mode
+# 3 selects VT52 mode
+#
+# One odd thing about the description (which has been unchanged since the 90s)
+# is that the cursor addressing is using VT52 mode, and a few others use the
+# VT52's non-CSI versions of ANSI, e.g., \EJ.
 tek4107|tek4109|tektronix terminals 4107 4109,
 	OTbs, am, mir, msgr, ul, xenl, xt,
 	cols#79, it#8, lines#29,
@@ -15934,9 +17615,9 @@
 	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
 	dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
 	kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
-	rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
+	rev=\E%!1\E[7m$<2>\E%!0, ri=\EI,
 	rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
-	sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
+	sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0,
 	sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
 	smul=\E%!1\E[4m$<2>\E%!0,
 # Tektronix 4207 with sysline.  In the ancestral termcap file this was 4107-s;
@@ -15971,9 +17652,9 @@
 tek4112|tek4114|tektronix 4110 series,
 	OTbs, am, db,
 	cols#80, lines#34,
-	cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
-	cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
-	ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
+	cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P,
+	dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
 	ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
 	rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
 tek4112-nd|4112 not in dialog area,
@@ -16036,8 +17717,8 @@
 	kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
 	rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
 	rmso=\E[m, rmul=\E[m,
-	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
-	sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
+	sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
+	sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
 	vpa=\E[%p1%{1}%+%dd,
 # The tek4125 emulates a vt100 incorrectly - the scrolling region
 # command is ignored.  The following entry replaces <csr> with the needed
@@ -16123,9 +17804,10 @@
 	clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
 	cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
-	dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
-	ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
-	ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
+	dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M,
+	ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
+	home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L,
+	ind=\ED,
 	initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
 	invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
 	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
@@ -16296,7 +17978,7 @@
 	kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
 	ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
 	rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
-	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
+	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m,
 	sgr0=\E[m, smso=\E[7m, smul=\E[4m,
 
 #### Apple II
@@ -16408,7 +18090,7 @@
 # This entry assumes that you are using an apple with the UCSD Pascal
 # language card.  SYSTEM.MISCINFO is assumed to be the same as that
 # supplied with the standard apple except that screenwidth should be set
-# using SETUP to 80 columns.  Note that the right arrow in not mapped in
+# using SETUP to 80 columns.  Note that the right arrow is not mapped in
 # this termcap entry.  This is because that key, on the Apple, transmits
 # a ^U and would thus preempt the more useful "up" function of vi.
 #
@@ -16444,15 +18126,16 @@
 apple-videx3|vapple|Apple II with 80 col card,
 	OTbs, am,
 	cols#80, lines#24,
-	clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
-	cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
-	kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
-	kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
+	clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC,
+	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex,
+	home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
+	kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#,
+	kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
 #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
 aepro|Apple II+ running ASCII Express Pro--vt52,
 	OTbs,
 	cols#80, lines#24,
-	clear=\014$<300/>, cuf1=\EC,
+	clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC,
 	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
 	el=\EK, home=\EH,
 # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
@@ -16524,505 +18207,6 @@
 mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
 	cols#132, use=mac,
 
-# The AppKit Terminal.app descriptions all have names beginning with
-# "nsterm". Note that the statusline (-s) versions use the window
-# titlebar as a phony status line, and may produce warnings during
-# compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
-# these warnings, or even ignore these entries entirely. Apps which
-# need to position the cursor or do other fancy stuff inside the status
-# line won't work with these entries. They're primarily useful for
-# programs like Pine which provide simple notifications in the status
-# line. Please note that non-ASCII characters don't work right in the
-# status line, since Terminal.app incorrectly interprets their Unicode
-# codepoints as MacRoman codepoints.
-#
-# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
-#   "nsterm" to comply with the name length and case conventions and
-#   limitations of various software packages [notably Solaris terminfo
-#   and UNIX.] A single Apple_Terminal alias is retained for
-#   backwards-compatbility.
-#
-# * Added function key support (F1-F4). These only work in Terminal.app
-#   version 51, hopefully the capabilities won't cause problems for people
-#   using version 41.
-#
-# * Added "full color" (-c) entries which support the 16-color mode in
-#   version 51.
-#
-# * By default, version 51 uses UTF-8 encoding with broken altcharset
-#   support, so "ASCII" (-7) entries without altcharset support were
-#   added.
-
-# nsterm - AppKit Terminal.app
-#
-# Apple's Mac OS X includes a Terminal.app derived from the old NeXT
-# Terminal.app. It is a partial VT100 emulation with some xterm-like
-# extensions. This terminfo was written to describe versions 41
-# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X
-# version 10.1) of Terminal.app.
-#
-# Terminal.app runs under the Mac OS X Quartz windowing system (and
-# other AppKit-supported windowing systems.)  On the Mac OS X machine I
-# use, the executable for Terminal.app is:
-# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal
-#
-# If you're looking for a description of the full-screen system
-# console which runs under Apple's Darwin operating system on PowerPC
-# platforms, see the "xnuppc" entry instead.
-#
-# There were no function keys in version 41. In version 51, there are
-# four working function keys (F1, F2, F3 and F4.) The function keys
-# are included in all of these entries.
-#
-# It does not support mouse pointer position reporting. Under some
-# circumstances the cursor can be positioned using option-click; this
-# works by comparing the cursor position and the selected position,
-# and simulating enough cursor-key presses to move the cursor to the
-# selected position. This technique fails in all but the simplest
-# applications.
-#
-# It provides partial ANSI color support (background colors interacted
-# badly with bold in version 41, though, as reflected in :ncv:.) The
-# monochrome (-m) entries are useful if you've disabled color support
-# or use a monochrome monitor. The full color (-c) entries are useful
-# in version 51, which doesn't exhibit the background color bug. They
-# also enable an xterm-compatible 16-color mode.
-#
-# The configurable titlebar is set using xterm-compatible sequences;
-# it is used as a status bar in the statusline (-s) entries. Its width
-# depends on font sizes and window sizes, but 50 characters seems to
-# be the default for an 80x24 window.
-#
-# The MacRoman character encoding is used for some of the alternate
-# characters in the "MacRoman" entries; the "ASCII" (-7) entries
-# disable alternate character set support entirely, and the "VT100"
-# (-acs) entries rely instead on Terminal.app's own buggy VT100
-# graphics emulation, which seems to think the character encoding is
-# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries
-# are useful in Terminal.app version 51, which supports UTF-8 and
-# other ASCII-compatible character encodings but does not correctly
-# implement VT100 graphics; once VT100 graphics are correctly
-# implemented in Terminal.app, the "VT100" (-acs) entries should be
-# usable in any ASCII-compatible character encoding [except perhaps
-# in UTF-8, where some experts argue for disallowing alternate
-# characters entirely.]
-#
-# Terminal.app reports "vt100" as the terminal type, but exports
-# several environment variables which may aid detection in a shell
-# profile (i.e. .profile or .login):
-#
-# TERM=vt100
-# TERM_PROGRAM=Apple_Terminal
-# TERM_PROGRAM_VERSION=41      # in Terminal.app version 41
-# TERM_PROGRAM_VERSION=51      # in Terminal.app version 51
-#
-# For example, the following Bourne shell script would detect the
-# correct terminal type:
-#
-# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ]
-# then
-#     export TERM
-#     if [ :"$TERM_PROGRAM_VERSION" = :41 ]
-#     then
-#         TERM="nsterm"
-#     else
-#         TERM="nsterm-c-7"
-#     fi
-# fi
-#
-# In a C shell derivative, this would be accomplished by:
-#
-# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
-#     if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
-#          if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
-#              setenv TERM "nsterm"
-#          else
-#              setenv TERM "nsterm-c-7"
-#          endif
-#     endif
-# endif
-
-# The '+' entries are building blocks
-nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset,
-	am, bw, msgr, xenl, xon,
-	cols#80, it#8, lines#24,
-	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
-	csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
-	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
-	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
-	dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
-	home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
-	kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
-	kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
-	rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
-	rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
-	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
-	sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
-	smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
-
-nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
-	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
-	enacs=\E(B\E)0, rmacs=^O,
-	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
-	smacs=^N, use=nsterm+7,
-
-nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
-	acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
-	enacs=\E(B\E)0, rmacs=^O,
-	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
-	smacs=^N, use=nsterm+7,
-
-nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
-	hs,
-	wsl#50,
-	dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
-
-nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors),
-	op=\E[0m, use=ibm+16color,
-
-nsterm+c41|AppKit Terminal.app v41 color support,
-	colors#8, ncv#37, pairs#64,
-	op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-
-# These are different combinations of the building blocks
-
-# ASCII charset (-7)
-nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome),
-	use=nsterm+7,
-
-nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline),
-	use=nsterm+s, use=nsterm+7,
-
-nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color),
-	use=nsterm+c41, use=nsterm+7,
-
-nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color),
-	use=nsterm+c, use=nsterm+7,
-
-nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline),
-	use=nsterm+s, use=nsterm+c41, use=nsterm+7,
-
-nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline),
-	use=nsterm+s, use=nsterm+c, use=nsterm+7,
-
-# VT100 alternate-charset (-acs)
-nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome),
-	use=nsterm+acs,
-
-nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline),
-	use=nsterm+s, use=nsterm+acs,
-
-nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color),
-	use=nsterm+c41, use=nsterm+acs,
-
-nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color),
-	use=nsterm+c, use=nsterm+acs,
-
-nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline),
-	use=nsterm+s, use=nsterm+c41, use=nsterm+acs,
-
-nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline),
-	use=nsterm+s, use=nsterm+c, use=nsterm+acs,
-
-# MacRoman charset
-nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome),
-	use=nsterm+mac,
-
-nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
-	use=nsterm+s, use=nsterm+mac,
-
-nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
-	use=nsterm+c41, use=nsterm+mac,
-
-nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
-	use=nsterm+c, use=nsterm+mac,
-
-nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline),
-	use=nsterm+s, use=nsterm+c41, use=nsterm+mac,
-
-nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
-	use=nsterm+s, use=nsterm+c, use=nsterm+mac,
-
-
-# This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
-# and D P Schreber comparing to nsterm-c-s-acs.
-#
-# D P Schreber notes that $TERM can be set in Terminal.app, e.g.,
-#	defaults write com.apple.Terminal TermCapString nsterm-c-s-acs
-# and that it is not set in Terminal's preferences dialog.
-nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9,
-	kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
-	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
-	knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs,
-
-# xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
-#
-# On PowerPC platforms, Apple's Darwin operating system uses a
-# full-screen system console derived from a NetBSD framebuffer
-# console. It is an ANSI-style terminal, and is not really VT-100
-# compatible.
-#
-# Under Mac OS X, this is the system console driver used while in
-# single-user mode [reachable by holding down Command-S during the
-# boot process] and when logged in using console mode [reachable by
-# typing ">console" at the graphical login prompt.]
-#
-# If you're looking for a description of the Terminal.app terminal
-# emulator which runs under the Mac OS X Quartz windowing system (and
-# other AppKit-supported windowing systems,) see the "nsterm"
-# entry instead.
-#
-# NOTE: Under Mac OS X version 10.1, the default login window does not
-# prompt for user name, instead requiring an icon to be selected from
-# a list of known users. Since the special ">console" login is not in
-# this list, you must make one of two changes in the Login Window
-# panel of the Login section of System Prefs to make the special
-# ">console" login accessible. The first option is to enable 'Show
-# "Other User" in list for network users', which will add a special
-# "Other..." icon to the graphical login panel. Selecting "Other..."
-# will present the regular graphical login prompt. The second option
-# is to change the 'Display Login Window as:' setting to 'Name and
-# password entry fields', which replaces the login panel with a
-# graphical login prompt.
-#
-# There are no function keys, at least not in Darwin 1.3.
-#
-# It has no mouse support.
-#
-# It has full ANSI color support, and color combines correctly with
-# all three supported attributes: bold, inverse-video and underline.
-# However, bold colored text is almost unreadable (bolding is
-# accomplished using shifting and or-ing, and looks smeared) so bold
-# has been excluded from the list of color-compatible attributes
-# [using (ncv)]. The monochrome entry (-m) is useful if you use a
-# monochrome monitor.
-#
-# There is one serious bug with this terminal emulation's color
-# support: repositioning the cursor onto a cell with non-matching
-# colors obliterates that cell's contents, replacing it with a blank
-# and displaying a colored cursor in the "current" colors. There is
-# no complete workaround at present [other than using the monochrome
-# (-m) entries,] but removing the (msgr) capability seemed to help.
-#
-# The "standout" chosen was simple reverse-video, although a colorful
-# standout might be more aesthetically pleasing. Similarly, the bold
-# chosen is the terminal's own smeared bold, although a simple
-# color-change might be more readable. The color-bold (-b) entries
-# uses magenta colored text for bolding instead. The fancy color (-f
-# and -f2) entries use color for bold, standout and underlined text
-# (underlined text is still underlined, though.)
-#
-# Apparently the terminal emulator does support a VT-100-style
-# alternate character set, but all the alternate character set
-# positions have been left blank in the font. For this reason, no
-# alternate character set capabilities have been included in this
-# description. The console driver appears to be ASCII-only, so (enacs)
-# has been excluded [although the VT-100 sequence does work.]
-#
-# The default Mac OS X and Darwin installation reports "vt100" as the
-# terminal type, and exports no helpful environment variables. To fix
-# this, change the "console" entry in /etc/ttys from "vt100" to
-# "xnuppc-WxH", where W and H are the character dimensions of your
-# console (see below.)
-#
-# The font used by the terminal emulator is apparently one originally
-# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This
-# file includes descriptions for the following geometries:
-#
-#     Pixels        Characters   Entry Name (append -m for monochrome)
-#    -------------------------------------------------------------------
-#     640x400       80x25        xnuppc-80x25
-#     640x480       80x30        xnuppc-80x30
-#     720x480       90x30        xnuppc-90x30
-#     800x600       100x37       xnuppc-100x37
-#     896x600       112x37       xnuppc-112x37
-#     1024x640      128x40       xnuppc-128x40
-#     1024x768      128x48       xnuppc-128x48
-#     1152x768      144x48       xnuppc-144x48
-#     1280x1024     160x64       xnuppc-160x64
-#     1600x1024     200x64       xnuppc-200x64
-#     1600x1200     200x75       xnuppc-200x75
-#     2048x1536     256x96       xnuppc-256x96
-#
-# The basic "xnuppc" entry includes no size information, and the
-# emulator includes no reporting capability, so you'll be at the mercy
-# of the TTY device (which reports incorrectly on my hardware.) The
-# color-bold entries do not include size information.
-
-# The '+' entries are building blocks
-xnuppc+basic|Darwin PowerPC Console basic capabilities,
-	am, bce, mir, xenl,
-	it#8,
-	bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
-	cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
-	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
-	cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K,
-	el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177,
-	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
-	rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m,
-	rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
-	sc=\E7,
-	sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
-	sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
-	smul=\E[4m, tbc=\E[3g, use=vt100+keypad,
-
-xnuppc+c|Darwin PowerPC Console ANSI color support,
-	colors#8, ncv#32, pairs#64,
-	op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
-
-xnuppc+b|Darwin PowerPC Console color-bold support,
-	ncv#32,
-	bold=\E[35m,
-	sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
-	use=xnuppc+basic,
-
-xnuppc+f|Darwin PowerPC Console fancy color support,
-	ncv#35,
-	sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m,
-	smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b,
-
-xnuppc+f2|Darwin PowerPC Console alternate fancy color support,
-	ncv#35,
-	bold=\E[33m,
-	sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m,
-	smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic,
-
-# Building blocks for specific screen sizes
-xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels),
-	cols#80, lines#25,
-
-xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels),
-	cols#80, lines#30,
-
-xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels),
-	cols#90, lines#30,
-
-xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels),
-	cols#100, lines#37,
-
-xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels),
-	cols#112, lines#37,
-
-xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels),
-	cols#128, lines#40,
-
-xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels),
-	cols#128, lines#48,
-
-xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels),
-	cols#144, lines#48,
-
-xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels),
-	cols#160, lines#64,
-
-xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels),
-	cols#200, lines#64,
-
-xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels),
-	cols#200, lines#75,
-
-xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels),
-	cols#256, lines#96,
-
-# These are different combinations of the building blocks
-
-xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome),
-	use=xnuppc+basic,
-
-xnuppc|darwin|Darwin PowerPC Console (color),
-	use=xnuppc+c, use=xnuppc+basic,
-
-xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold),
-	use=xnuppc+b,
-
-xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold),
-	use=xnuppc+b, use=xnuppc+c,
-
-xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome),
-	use=xnuppc+f,
-
-xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color),
-	use=xnuppc+f, use=xnuppc+c,
-
-xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome),
-	use=xnuppc+f2,
-
-xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color),
-	use=xnuppc+f2, use=xnuppc+c,
-
-# Combinations for specific screen sizes
-xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25,
-	use=xnuppc+80x25, use=xnuppc+basic,
-
-xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25,
-	use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic,
-
-xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30,
-	use=xnuppc+80x30, use=xnuppc+basic,
-
-xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30,
-	use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic,
-
-xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30,
-	use=xnuppc+90x30, use=xnuppc+basic,
-
-xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30,
-	use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic,
-
-xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37,
-	use=xnuppc+100x37, use=xnuppc+basic,
-
-xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37,
-	use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic,
-
-xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37,
-	use=xnuppc+112x37, use=xnuppc+basic,
-
-xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37,
-	use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic,
-
-xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40,
-	use=xnuppc+128x40, use=xnuppc+basic,
-
-xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40,
-	use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic,
-
-xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48,
-	use=xnuppc+128x48, use=xnuppc+basic,
-
-xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48,
-	use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic,
-
-xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48,
-	use=xnuppc+144x48, use=xnuppc+basic,
-
-xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48,
-	use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic,
-
-xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64,
-	use=xnuppc+160x64, use=xnuppc+basic,
-
-xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64,
-	use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic,
-
-xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64,
-	use=xnuppc+200x64, use=xnuppc+basic,
-
-xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64,
-	use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic,
-
-xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75,
-	use=xnuppc+200x75, use=xnuppc+basic,
-
-xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75,
-	use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic,
-
-xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96,
-	use=xnuppc+256x96, use=xnuppc+basic,
-
-xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96,
-	use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic,
-
 #### Radio Shack/Tandy
 #
 
@@ -17064,42 +18248,6 @@
 	lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
 	smacs=\ERG, smso=\ERD,
 
-#### Atari ST
-#
-
-# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
-atari|atari st,
-	OTbs, am,
-	cols#80, it#8, lines#25,
-	clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
-	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
-	ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
-	kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
-# UniTerm terminal program for the Atari ST:  49-line VT220 emulation mode
-# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
-uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
-	lines#49,
-	is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
-	use=vt220,
-# MiNT VT52 emulation. 80 columns, 25 rows.
-# MiNT is Now TOS, the operating system which comes with all Ataris now
-# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
-# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
-# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
-st52|Atari ST with VT52 emulation,
-	am, km,
-	cols#80, lines#25,
-	bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
-	cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
-	cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
-	ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
-	kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
-	kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
-	kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
-	kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
-	ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
-	smcup=\Ee, smso=\Ep,
-
 #### Commodore Business Machines
 #
 # Formerly located in West Chester, PA; went spectacularly bust in 1994
@@ -17307,23 +18455,48 @@
 # even as single processes under SunOS and the Macintosh OS.
 #
 
+# See
+#	http://www.minix3.org/manpages/html4/console.html
+minix|minix console (v3),
+	acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
+	kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~,
+	kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~,
+	kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~,
+	kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~,
+	kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~,
+	kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~,
+	kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~,
+	kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~,
+	kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~,
+	kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~,
+	kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~,
+	kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
+	kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@,
+	use=minix-3.0,
+
+minix-3.0|minix console (v3.0),
+	use=ecma+color, use=minix-1.7,
+
+# See
+#	http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
 # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
-minix|minix console (v1.7),
+minix-1.7|minix console (v1.7),
 	am, xenl,
 	cols#80, it#8, lines#25,
 	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
 	cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
 	cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
 	cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
-	dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
-	ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
-	is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
-	kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
-	kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
-	lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
-	rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
+	dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
+	home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
+	il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
+	kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
+	kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
+	lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
+	rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
+	smso=\E[7m, smul=\E[4m,
 # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
-minix-old|minix console (v1.5),
+minix-old|minix-1.5|minix console (v1.5),
 	xon,
 	cols#80, it#8, lines#25,
 	bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
@@ -17342,7 +18515,7 @@
 	am, use=minix-old,
 
 pc-minix|minix console on an Intel box,
-	use=klone+acs, use=minix,
+	use=klone+acs, use=minix-3.0,
 
 # According to the Coherent 2.3 manual, the PC console is similar
 # to a z19. The differences seem to be (1) 25 lines, (2) no status
@@ -17428,7 +18601,7 @@
 xerox820|x820|Xerox 820,
 	am,
 	cols#80, lines#24,
-	bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
+	bel=^G, clear=\032$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
 	cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
 	home=^^, ind=^J,
 
@@ -17729,7 +18902,7 @@
 	rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
 	sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
 	sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
-	smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
+	smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
 	tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
 tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
 	dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
@@ -17745,6 +18918,7 @@
 	use=tws-generic,
 dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
 	blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
+	sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
 	smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
 
 #=========================================================#
@@ -17824,7 +18998,7 @@
 
 # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
 bq300|Bull vt320 ISO Latin 1 80 columns terminal,
-	am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
+	am, eo, eslok, hs, km, mir, msgr, xenl, xon,
 	cols#80, it#8, lines#24, vt#3, wsl#80,
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
@@ -17848,14 +19022,14 @@
 	kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
 	khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
 	krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
-	mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
-	ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
-	rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
-	rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
+	nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l,
+	rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
+	rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0,
+	sc=\E7,
 	sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
 	sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
 	smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
-	smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
+	smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp,
 bq300-rv|Bull vt320 reverse 80 columns,
 	flash=\E[?5l$<50>\E[?5h,
 	is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
@@ -17930,14 +19104,15 @@
 	acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
 	bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
 	clear=\233H\233J, cnorm=\233?25h, cr=^M,
-	csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
-	cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
-	dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
+	csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D,
+	cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C,
+	cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A,
+	dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
 	dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
 	el=\233K, el1=\2331K, enacs=\E(B\E)0,
 	flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
-	ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
-	is1=\E[63;2"p\E[2h,
+	ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L,
+	ind=\ED, is1=\E[63;2"p\E[2h,
 	is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
 	is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
 	ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
@@ -17950,11 +19125,12 @@
 	khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
 	krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
 	lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
-	rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
-	rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
-	rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
+	rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l,
+	rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>,
+	rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l,
+	s0ds=\E(B, s1ds=\E(0, sc=\E7,
 	sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
-	sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
+	sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
 	smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
 	smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
 bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
@@ -18472,11 +19648,11 @@
 h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
 	OTbs, am, eslok, hs, mir, msgr,
 	cols#80, it#8, lines#24,
-	acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
+	acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G,
 	clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
 	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
 	dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J,
-	ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+	ip=$<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
 	kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
 	kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
 	lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
@@ -18559,14 +19735,14 @@
 	cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
 	dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
-	dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
-	ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
-	ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
-	kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
-	kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
-	kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
-	nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
-	rmso=\E[m, rmul=\E[m,
+	dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l,
+	home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100,
+	il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J,
+	kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J,
+	kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW,
+	kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help,
+	mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM,
+	rmcup=\E[?7h, rmso=\E[m, rmul=\E[m,
 	rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
 	sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
 	tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
@@ -18610,7 +19786,7 @@
 z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
 	OTbs, OTpt, mir, msgr,
 	OTkn#10, cols#80, it#8, lines#24,
-	acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
+	acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^,
 	clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
 	cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
 	cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK,
@@ -18658,7 +19834,7 @@
 ims-ansi|ultima2|ultimaII|IMS Ultima II,
 	OTbs, am,
 	cols#80, it#8, lines#24,
-	clear=\E[H\E[2J, cub1=^H, cud1=\ED,
+	clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC,
 	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
 	ht=^I, if=/usr/share/tabset/vt100,
 	is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
@@ -18769,9 +19945,9 @@
 modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
 	am, da, db,
 	cols#80, it#8, lines#24,
-	clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
-	cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
-	ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
+	clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>,
+	cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>,
+	cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
 	is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
 	ri=\EI$<5/>,
 #
@@ -18842,9 +20018,9 @@
 ex155|Motorola Exorterm 155,
 	OTbs, am, bw,
 	OTkn#5, OTug#1, cols#80, lines#24,
-	cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
-	cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
-	home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
+	cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC,
+	cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET,
+	el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
 	kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
 	rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
 
@@ -19140,7 +20316,7 @@
 t10|teleray 10 special,
 	OTbs, km, xhp, xt,
 	cols#80, it#8, lines#24, xmc#2,
-	clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
+	clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC,
 	cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
 	dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
 	ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
@@ -19236,12 +20412,11 @@
 	cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
 	dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
 	il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
-	kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
-	kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
-	kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
-	kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
-	rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
-	smul=\E[4m, tbc=\E[3g,
+	kcuf1=\E[C, kcuu1=\E[A, kdch1=\233P, kf1=\217P, kf2=\217Q,
+	kf3=\217R, kf4=\217S, kf5=\23316~, kf6=\23317~,
+	kf7=\23318~, kf8=\23319~, kf9=\23320~, kich1=\233@, rc=\E8,
+	rev=\E[7m, ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
 ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
 	cols#132, use=ti924,
 ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
@@ -19367,6 +20542,193 @@
 apollo_color|apollo color display,
 	rmir@, smir@, use=vt132,
 
+#### AT&T consoles
+
+# This actually describes the generic SVr4 display driver for Intel boxes.
+# The <dim=\E[2m> isn't documented and therefore may not be reliable.
+# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
+att6386|at386|386at|AT&T WGS 6386 console,
+	am, bw, eo, xon,
+	cols#80, it#8, lines#25,
+	acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
+	bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
+	clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
+	cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+	cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
+	dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
+	home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
+	ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
+	indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
+	kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
+	kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
+	kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
+	knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
+	ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
+	sc=\E7,
+	sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
+	sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
+	tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
+# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
+pc6300plus|AT&T 6300 plus,
+	OTbs, am, xon,
+	cols#80, lines#24,
+	bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
+	clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
+	cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
+	dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
+	home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
+	invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+	kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
+	kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
+	nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
+	smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+
+# From: Benjamin C. W. Sittler <bsittler@nmt.edu>
+#
+# I have a UNIX PC which I use as a terminal attached to my Linux PC.
+# Unfortunately, the UNIX PC terminfo entry that comes with ncurses
+# is broken. All the special key sequences are broken, making it unusable
+# with Emacs. The problem stems from the following:
+#
+# The UNIX PC has a plethora of keys (103 of them, and there's no numeric
+# keypad!), loadable fonts, and strange highlighting modes ("dithered"
+# half-intensity, "smeared" bold, and real strike-out, for example.) It also
+# uses resizable terminal windows, but the bundled terminal program always
+# uses an 80x24 window (and doesn't support seem to support a 132-column
+# mode.)
+#
+# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
+# library which was a superset of SVr3.5 curses (called tam, for "terminal
+# access method".) tam includes support for real, overlapping windows,
+# onscreen function key labels, and bitmap graphics. But since the primary
+# user interface on the UNIX PC was a GUI program (ua, for "user
+# assistant",) and remote administration was considered important for the
+# machine, tam also supported VT100-compatible terminals attached to the
+# serial port or used across the StarLan network. To simulate the extra keys
+# not present on a VT100, users could press ESC and a two-letter sequence,
+# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
+# however, were not the same as those sent by the actual Undo key. The
+# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
+# (If you're interested in adding some of the tam calls to ncurses, btw, I
+# have the full documentation and several programs which use tam. It also
+# used an extended terminfo format to describe key sequences, special
+# highlighting modes, etc.)
+#
+# KEYS: This means that ncurses would quite painful on the UNIX PC, since
+# there are two sequences for every key-modifier combination (local keyboard
+# sequence and remote "VT100" sequence.) But I doubt many people are trying
+# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
+# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
+# seem to have been built from the manual describing the VT100 sequences.
+# This means it doesn't work for a real live UNIX PC.
+#
+# FONTS: The UNIX PC also has a strange interpretation of "alternate
+# character set". Rather than the VT100 graphics you might expect, it allows
+# up to 8 custom fonts to be loaded at any given time. This means that
+# programs expecting VT100 graphics will usually be disappointed. For this
+# reason I have disabled the smacs/rmacs sequences, but they could easily be
+# re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
+# manpage), should you wish to do so:
+#
+# SGR10 - Select font 0 - ESC [ 10 m or SO
+# SGR11 - Select font 1 - ESC [ 11 m or SI
+# SGR12 - Select font 2 - ESC [ 12 m
+# ... (etc.)
+# SGR17 - Select font 7 - ESC [ 17 m
+#
+# Graphics for line drawing are not reliably found at *any* character
+# location because the UNIX PC has dynamically reloadable fonts. I use font
+# 0 for regular text and font 1 for italics, but this is by no means
+# universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
+#
+# MISC: The cursor visible/cursor invisible sequences were swapped in the
+# distributed terminfo.
+#
+# To ameliorate these problems (and fix a few highlighting bugs) I rewrote
+# the UNIX PC terminfo entry. The modified version works great with Lynx,
+# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
+# attached by serial cable. In Emacs, even the Undo key works, and many
+# applications can now use the F1-F8 keys.
+#
+# esr's notes:
+#	Terminfo entry for the AT&T Unix PC 7300
+#	from escape(7) in Unix PC 7300 Manual.
+#	Somewhat similar to a vt100-am (but different enough
+#	to redo this from scratch.)
+#
+#	/***************************************************************
+#	*
+#	*           FONT LOADING PROGRAM FOR THE UNIX PC
+#	*
+#	*     This routine loads a font defined in the file ALTFONT
+#	*     into font memory slot #1.  Once the font has been loaded,
+#	*     it can be used as an alternative character set.
+#	*
+#	*     The call to ioctl with the argument WIOCLFONT is the key
+#	*     to this routine.  For more information, see window(7) in
+#	*     the PC 7300 documentation.
+#	***************************************************************/
+#	#include <string.h>		/* needed for strcpy call */
+#	#include <sys/window.h>         /* needed for ioctl call */
+#	#define FNSIZE	60		/* font name size */
+#	#define ALTFONT  "/usr/lib/wfont/special.8.ft"  /* font file */
+#	/*
+#	*     The file /usr/lib/wfont/special.8.ft comes with the
+#	*     standard PC software.  It defines a graphics character set
+#	*     similar to that of the Teletype 5425 terminal.  To view
+#	*     this or other fonts in /usr/lib/wfont, use the command
+#	*     cfont <filename>.  For further information on fonts see
+#	*     cfont(1) in the PC 7300 documentation.
+#	*/
+#
+#	struct altfdata 	/* structure for alt font data */
+#	{
+#	short	altf_slot;		/* memory slot number */
+#	char	altf_name[FNSIZE];	/* font name (file name) */
+#	};
+#	ldfont()
+#	{
+#		int wd;		/* window in which altfont will be */
+#		struct altfdata altf;
+#		altf.altf_slot=1;
+#		strcpy(altf.altf_name,ALTFONT);
+#		for (wd =1; wd < 12; wd++) {
+#		     ioctl(wd, WIOCLFONT,&altf);
+#	        }
+#	}
+#
+# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
+# they're confirmed by the man page for the System V display---esr)
+#
+att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
+	am, xon,
+	cols#80, it#8, lines#24,
+	bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
+	clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
+	cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
+	cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
+	cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
+	ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
+	il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
+	kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
+	kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
+	kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
+	kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
+	kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
+	kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
+	ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
+	kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
+	kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
+	kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
+	kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
+	kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
+	ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
+	rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
+	smul=\E[4m,
+
 #### Convergent Technology
 #
 # Burroughs bought Convergent shortly before it merged with Univac.
@@ -19472,6 +20834,54 @@
 masscomp2|masscomp large screen version 2,
 	cols#64, lines#21, use=masscomp,
 
+#### OSF Unix
+#
+
+# OSF/1 1.1 Snapshot 2
+pmcons|pmconsole|PMAX console,
+	am,
+	cols#128, lines#57,
+	bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
+	ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
+	kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
+
+#### Other consoles
+# The following is a version of the ibm-pc entry distributed with PC/IX,
+# (Interactive Systems' System 3 for the Big Blue), modified by Richard
+# McIntosh at UCB/CSM.  The :pt: and :uc: have been removed from the original,
+# (the former is untrue, and the latter failed under UCB/man); standout and
+# underline modes have been added.  Note: this entry describes the "native"
+# capabilities of the PC monochrome display, without ANY emulation; most
+# communications packages (but NOT PC/IX connect) do some kind of emulation.
+pcix|PC/IX console,
+	am, bw, eo,
+	cols#80, lines#24,
+	clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
+	home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
+	smul=\E[4m,
+
+# (ibmpcx: this entry used to be known as ibmx.
+# It formerly included the following extension capabilities:
+#	:GC=b:GL=v:GR=t:RT=^J:\
+#	:GH=\E[196g:GV=\E[179g:\
+#	:GU=\E[193g:GD=\E[194g:\
+#	:G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
+#	:CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
+#	:WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
+# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
+# ":kh=\E[Y:".  Added IBM-PC forms characters and highlights, they match
+# what was there before. -- esr)
+ibmpcx|xenix|ibmx|IBM PC xenix console display,
+	OTbs, am, msgr,
+	cols#80, lines#25,
+	clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
+	cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
+	ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
+	kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
+	kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
+	kpp=\E[Z, use=klone+acs, use=klone+sgr8,
+
 ######## OTHER OBSOLETE TYPES
 #
 # These terminals are *long* dead -- these entries are retained for
@@ -19675,7 +21085,7 @@
 	cols#80, lines#24,
 	clear=^L, cub1=^H, cuf1=\EX,
 	cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
-	dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
+	dch1=\E'D$<.1*>, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
 	il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
 	kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
 	rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
@@ -19766,9 +21176,9 @@
 	sgr0=\EX, smacs=\EF, smso=\ET,
 env230|envision230|envision 230 graphics terminal,
 	xenl@,
-	mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
-	sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
-	use=vt100,
+	enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,
+	sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
+	sgr0=\E[0m$<2>, smacs@, use=vt100,
 # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
 # coupler attached, the whole rig fitting in a suitcase and more or less
 # portable.  Hot stuff for c.1977 :-) -- esr
@@ -19823,7 +21233,7 @@
 	rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
 	rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
 	rs3=\EwG\Ee($<150>,
-	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
+	sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
 	sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
 	smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
 	smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
@@ -19862,7 +21272,7 @@
 v3220|LANPAR Vision II model 3220/3221/3222,
 	OTbs, am, mir, xenl,
 	cols#80, it#8, lines#24,
-	clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
+	clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C,
 	cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
 	ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
 	is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
@@ -20430,7 +21840,7 @@
 # assigned in System V terminfo.  There are some variant extension sets out
 # there.  We try to describe them here.
 #
-# XENIX extensions:
+#### XENIX extensions:
 #
 # The XENIX extensions include a set of function-key capabilities as follows:
 #
@@ -20495,7 +21905,7 @@
 # When translating a termcap file, ncurses tic will do this automatically.
 # The double forms characters don't fit the SVr4 terminfo model.
 #
-# AT&T Extensions:
+#### AT&T Extensions:
 #
 # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
 # nonstandard capabilities.  Its signature is the KM capability, used to name
@@ -20506,7 +21916,7 @@
 # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
 # cursor invisible), and CV=:ve: (make cursor normal).
 #
-# HP Extensions
+#### HP Extensions
 #
 # The HP library (as of mid-1995, their term.h file version 70.1) appears to
 # have the System V capabilities up to SVr1 level.  After that, it supports
@@ -20515,7 +21925,7 @@
 # label_off, and key_f11..key_f63 capabilities like SVr4's.  This makes the
 # HP binary format incompatible with SVr4's.
 #
-# IBM Extensions
+#### IBM Extensions
 #
 # There is a set of nonstandard terminfos used by IBM's AIX operating system.
 # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
@@ -20543,7 +21953,7 @@
 # The box2 characters are the double-line versions of these forms graphics.
 # The AIX binary terminfo format is incompatible with SVr4's.
 #
-# Iris console extensions:
+#### Iris console extensions:
 #
 # HS is half-intensity start; HE is half-intensity end
 # CT is color terminal type (for Curses & rogue)
@@ -20552,7 +21962,7 @@
 #
 # The ncurses tic utility recognizes HS as an alias for mh <dim>.
 #
-# TC Extensions:
+#### TC Extensions:
 #
 # There is a set of extended termcaps associated with something
 # called the "Terminal Control" or TC package created by MainStream Systems,
@@ -20560,11 +21970,123 @@
 # CF for civis and CO for cvvis.  Finally, they define a boolean :ct:
 # that flags color terminals.
 #
+######## NCURSES USER-DEFINABLE CAPABILITIES
+#
+# Extensions added after ncurses 5.0 generally use the "-x" option of tic and
+# infocmp to manipulate user-definable capabilities.  Those that are intended
+# for use in either terminfo or termcap use 2-character names.  Extended
+# function keys do not use 2-character names, and are available only with
+# terminfo.
+#
+# As of mid-2012, no other terminfo/termcap implementation than ncurses
+# supports this extension; termcap libraries can as noted above make limited
+# use of the feature.
+#
+# ncurses makes explicit checks for a few user-definable capabilities:  AX, U8,
+# XM.
+#
+#### SCREEN Extensions:
+#
+# The screen program uses the termcap interface.  It recognizes a few useful
+# nonstandard capabilities.  Those are used in this file.
+#
+#       AX   (bool)  Does  understand  ANSI  set  default fg/bg color (\E[39m /
+#                    \E[49m).
+#       G0   (bool)  Terminal can deal with ISO 2022  font  selection sequences.
+#       E0   (str)   Switch charset 'G0' back to standard charset.
+#       S0   (str)   Switch charset 'G0' to the specified charset.
+#       XT   (bool)  Terminal understands special xterm sequences  (OSC,  mouse
+#                    tracking).
+#
+# AX is relatively straightforward; it is interpreted by ncurses to say that
+# SGR 39/49 reset the terminal's foreground and background colors to their
+# "default".
+#
+# XT is harder, since screen's manpage does not give more details.  For that,
+# we must read screen's source-code.  When XT is set, screen assumes
+#
+# a) OSC 1 sets the title string, e.g., for the icon.  Recent versions of
+#    screen may also set the terminal's name, which is (for xterm) distinct
+#    from the icon name.
+# b) OSC 20 sets the background pixmap.  This is an rxvt feature.
+# c) OSC 39 and OSC 49 set the default foreground/background colors.  Again
+#    this is an rxvt feature.
+# d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003.
+#    These are from xterm, although xterm accepts mouse codes that may not be
+#    recognized by screen, e.g., 1005, 1006.
+# e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color
+#    sequence.  However, because screen uses only termcap, the values returned
+#    by Af/Ab are not usable because they rely on expressions that termcap
+#    does not support.  Therefore, screen uses a hardcoded string to work
+#    around the limitation.
+# f) all entries named "*xterm*" or "*rxvt*" have the bce flag set.
+#
+# The other ISO-2022 features are rarely used, but provided here to make
+# screen's termcap features available.
+#
+#### XTERM Extensions:
+#
+# Most of the xterm extensions are for function-keys.  Since patch #94 (in
+# 1999), xterm has supported shift/control/alt/meta modifiers which produce
+# additional function-key strings.  Some other developers copied the feature,
+# though they did not follow xterm's lead in patch #167 (in 2002), to make
+# these key definitions less ambiguous.
+#
+# A few terminals provide similar functionality (sending distinct keys when
+# a modifier is used), including rxvt.
+#
+# These are the extended keys defined in this file:
+#
+# kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6
+# kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4
+# kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7
+# kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2
+#
+# Here are the other xterm-related extensions which are used in this file:
+#
+# Cr is a string capability which resets the cursor color
+# Cs is a string capability which sets the cursor color to a given value.
+#    The single string parameter is the color name/number, according to the
+#    implementation.
+# Ms modifies the selection/clipboard.  Its parameters are
+#	p1 = the storage unit (clipboard, selection or cut buffer)
+#	p2 = the base64-encoded clipboard content.
+# Se resets the cursor style to the terminal power-on default.
+# Ss is a string capability with one numeric parameter.  It is used to set the
+#    cursor style as described by the DECSCUSR function to a block or
+#    underline.
+# TS is a string capability which acts like "tsl", but uses no parameter and
+#    goes to the first column of the "status line".
+# XM is a string capability which overrides ncurses's built-in string which
+#    enables/disables xterm mouse mode.
+# xm shows the format of the mouse responses.  Parameters are (from zero):
+#	p1 = y-ordinate
+#	p2 = x-ordinate
+#	p3 = button
+#	p4 = state, e.g., pressed or released
+#	p6 = y-ordinate starting region
+#	p7 = x-ordinate starting region
+#	p8 = y-ordinate ending region
+#	p9 = x-ordinate ending region
+# Other extensions, used in xm:
+#	%u = UTF-8
+#
+#### Miscellaneous extensions:
+#
+# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.
+#    This was implemented for the Hurd.
+# E3 clears the terminal's scrollback buffer.  This was implemented in the
+#    Linux 3.0 kernel as a security feature.  It matches a feature which was
+#    added in xterm patch #107.
+# U8 is a numeric capability which denotes a terminal emulator which does not
+#    support VT100 SI/SO when processing UTF-8 encoding.  Set this to a nonzero
+#    value to enable it.
+#
 ######## CHANGE HISTORY
 #
 # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
-# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
-# project.
+# Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were
+# maintained by Eric S. Raymond as part of the ncurses project.
 #
 # This file contains all the capability information present in John Kunze's
 # last version of the termcap master file, except as noted in the change
@@ -20664,7 +22186,7 @@
 #	* Replaced HP entries up to hpsub with purpose-built ones.
 #	* Blank rmir/smir/rmdc/smdc capabilities removed.
 #	* Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
-# 9.4.8 (Fri Apr  7 09:36:34 EDT 199):
+# 9.4.8 (Fri Apr  7 09:36:34 EDT 1995):
 #	* Replaced the Ann Arbor entries with SCO's, the init strings are
 #	  more efficient (but the entries otherwise identical).
 #	* Added dg211 from Shuford archive.
@@ -21773,7 +23295,7 @@
 #	* add screen.rxvt -TD
 #
 # 2008-04-28
-#	* add screen+fkeys (prompted by Debian # 478094) -TD
+#	* add screen+fkeys (prompted by Debian #478094) -TD
 #
 # 2008-06-28
 #	* add screen.mlterm -TD
@@ -21791,13 +23313,393 @@
 #	* add "aterm" -TD
 #	* add "linux2.6.26" -TD
 #
-# The following sets edit modes for GNU EMACS.
-# Local Variables:
-# fill-prefix:"\t"
-# fill-column:75
-# comment-column:0
-# comment-start-skip:"^#+"
-# comment-start:"# "
-# compile-command:"tic -c terminfo.master"
-# End:
+# 2008-11-15
+#	* change several \E[2g (clear tab at current column) to \E[3g
+#	  (clear all tabs) to match definition for tbc capability -TD
+#
+# 2008-11-29
+#	* add eterm-color -TD
+#
+# 2009-01-10
+#	* add screen.Eterm -TD
+#
+# 2009-03-28
+#	* correct typo in pfkey of ansi.sys-old
+#	  (report by Kalle Olavi Niemitalo)
+#	* move function- and cursor-keys from emx-base to ansi.sys, and create
+#	  a pfkey capability which handles F1-F48 -TD
+#
+# 2009-05-02
+#	* add vwmterm entry (Bryan Christ)
+#
+# 2009-09-19
+#	* change ncv and op capabilities in sun-color to match Sun's entry for
+#	  this (report by Laszlo Peter)
+#	* improve interix smso by using reverse rather than bold (report by
+#	  Kristof Zelechovski).
+#
+# 2009-10-03
+#	* remove unnecessary kcan assignment to ^C from putty (Sven Joachim)
+#	* add linux-16color (Benjamin Sittler)
+#	* correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
+#	* similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
+#	* add ccc and initc capabilities to xterm-16color -TD
+#
+# 2009-10-31
+#	* updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
+#
+# 2009-12-12
+#	* updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
+#
+# 2009-12-19
+#	* add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
+#	* rename minix to minix-1.7, add minix entry for Minux3 -TD
+#
+# 2009-12-26
+#	* add bterm (bogl 0.1.18) -TD
+#	* minor fix to rxvt+pcfkeys -TD
+#
+# 2010-02-06
+#	* update mrxvt to 0.5.4, add mrxvt-256color -TD
+#
+# 2010-02-13
+#	* add several screen-bce.XXX entries -TD
+#
+# 2010-02-23
+#	* modify screen-bce.XXX entries to exclude ech, since screen's color
+#	  model does not clear with color for that feature -TD
+#
+# 2010-03-20
+#	* rename atari and st52 to atari-old, st52-old, use newer entries from
+#	  FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
+#
+# 2010-06-12
+#	* add mlterm+256color entry -TD
+#
+# 2010-07-17
+#	* add hard-reset for rs2 to wsvt25 to help ensure that reset ends
+#	  the alternate character set (patch by Nicholas Marriott)
+#
+# 2010-08-28
+#	* improve acsc for vt52 (Benjamin Sittler)
+#	* modify nsterm entries for consistent sgr/sgr0 -TD
+#	* modify xnuppc entries for consistent sgr/sgr0 -TD
+#	* add invis to tek4115 sgr -TD
+#
+# 2010-09-11
+#	* reformat acsc strings to canonical format -TD
+#
+# 2010-09-25
+#	* add "XT" capability to entries for terminals that support both
+#	  xterm-style mouse- and title-controls, for "screen" which
+#	  special-cases TERM beginning with "xterm" or "rxvt" -TD
+#
+# 2010-10-02
+#	* fill in no-parameter forms of cursor-movement where a parameterized
+#	  form is available -TD
+#	* fill in missing cursor controls where the form of the controls is
+#	  ANSI -TD
+#	* add parameterized cursor-controls to linux-basic (report by Dae) -TD
+#
+# 2010-10-09
+#	* correct comparison used for setting 16-colors in linux-16color
+#	  entry (Novell #644831) -TD
+#	* improve linux-16color entry, using "dim" for color-8 which makes it
+#	  gray rather than black like color-0 -TD
+#
+# 2010-11-20
+#	* make "vte" the principal entry defining "gnome", since GNOME terminal
+#	  is merely one of several terminals whose behavior is provided by this
+#	  library -TD
+#
+# 2010-11-27
+#	* fix typo in rmso for tek4106 -Goran Weinholt
+#
+# 2010-12-11
+#	* suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno
+#	* also suppress ncv in konsole-base -TD
+#
+# 2011-02-05
+#	* add U8 feature to denote entries for terminal emulators which do not
+#	  support VT100 SI/SO when processing UTF-8 encoding -TD
+#	* add xterm-utf8 as a demo of the U8 feature -TD
+#
+# 2011-02-20
+#	* add cons25-debian entry (Brian M Carlson, Debian #607662).
+#
+# 2011-06-11
+#	* update minix entry to minix 3.2 (Thomas Cort).
+#
+# 2011-07-09
+#	* fix inconsistent tabset path in pcmw (Todd C. Miller).
+#	* remove a backslash which continued comment, obscuring altos3
+#	  definition with OpenBSD toolset (Nicholas Marriott).
+#
+# 2011-07-16
+#	* add/use xterm+tmux chunk from xterm #271 -TD
+#	* resync xterm-new entry from xterm #271 -TD
+#	* add E3 extended capability to linux-basic (Miroslav Lichvar)
+#	* add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD
+#	* add SI/SO change to linux2.6 entry (Debian #515609) -TD
+#
+# 2011-07-21
+#	* add kich1 to sun (Yuri Pankov)
+#	* use bold rather than reverse for smso in sun-color (Yuri Pankov).
+#
+# 2011-08-06
+#	* corrected k9 in dg460-ansi, add other features based on manuals -TD
+#
+# 2011-08-20
+#	* minor cleanup of X-terminal emulator section -TD
+#	* add terminator entry -TD
+#	* add simpleterm entry -TD
+#
+# 2011-09-10
+#	* add xterm+kbs fragment from xterm #272 -TD
+#
+# 2011-11-12
+#	* add pccon entries for OpenBSD console (Alexei Malinin)
+#
+# 2011-12-17
+#	* corrected old changelog comments -TD
+#
+# 2011-11-24
+#	* add putty-sco -TD
+#
+# 2012-01-28
+#	* add mach-gnu (Samuel Thibault)
+#	* add mach-gnu-color, tweaks to mach-gnu -TD
+#	* make sgr for sun-color agree with smso -TD
+#	* make sgr for prism9 agree with other caps -TD
+#	* make sgr for icl6404 agree with other caps -TD
+#	* make sgr for ofcons agree with other caps -TD
+#	* make sgr for att5410v1, att4415, att620 agree with other caps -TD
+#	* make sgr for aaa-unk, aaa-rv agree with other caps -TD
+#	* make sgr for avt-ns agree with other caps -TD
+#
+# 2012-02-11
+#	* make sgr for xterm-pcolor agree with other caps -TD
+#	* make sgr for att5425 agree with other caps -TD
+#	* make sgr for att630 agree with other caps -TD
+#	* make sgr for linux entries agree with other caps -TD
+#	* make sgr for tvi9065 agree with other caps -TD
+#	* make sgr for ncr260vt200an agree with other caps -TD
+#	* make sgr for ncr160vt100pp agree with other caps -TD
+#	* make sgr for ncr260vt300an agree with other caps -TD
+#	* make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD
+#	* make sgr for cygwin, cygwinDBG agree with other caps -TD
+#
+# 2012-03-31
+#	* correct order of use-clauses in st-256color -TD
+#
+# 2012-04-01
+#	* revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD
+#
+# 2012-04-14
+#	* document all of the user-defined capabilities in one place -TD
+#	* add XT to some places to improve usefulness for other applications
+#	  than screen, which would like to pretend that xterm's title is
+#	  a status-line. -TD
+#	* change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review
+#	  of ordering and overrides -TD
+#
+# 2012-04-21
+#	* add msgr to vt420, similar DEC vtXXX entries -TD
+#	* add several missing vt420 capabilities from vt220 -TD
+#	* factor out ansi+pp from several entries -TD
+#	* change xterm+sl and xterm+sl-twm to include only the status-line
+#	  capabilities and not "use=xterm", making them more generally useful
+#	  as building-blocks -TD
+#	* add dec+sl building block, as example -TD
+#
+# 2012-04-28
+#	* fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD
+#	* add eslok flag to dec+sl -TD
+#	* dec+sl applies to vt320 and up -TD
+#	* drop wsl width from xterm+sl -TD
+#	* reuse xterm+sl in putty and nsca-m -TD
+#	* add ansi+tabs to vt520 -TD
+#	* add ansi+enq to vt220-vt520 -TD
+#
+# 2012-05-05
+#	* remove p6 (bold) from opus3n1+ for consistency -TD
+#	* remove acs stuff from env230 per clues in Ingres termcap -TD
+#	* modify env230 sgr/sgr0 to match other capabilities -TD
+#	* modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD
+#	* make sgr for dku7202 agree with other caps -TD
+#	* make sgr for ibmpc agree with other caps -TD
+#	* make sgr for tek4107 agree with other caps -TD
+#	* make sgr for ndr9500 agree with other caps -TD
+#	* make sgr for sco-ansi agree with other caps -TD
+#	* make sgr for d410 agree with other caps -TD
+#	* make sgr for d210 agree with other caps -TD
+#	* make sgr for d470c, d470c-7b agree with other caps -TD
+#
+# 2012-05-12
+#	* rewrite vt520 entry based on vt420 -TD
+#	* corrected 'op' for bterm (report by Samuel Thibault) -TD
+#
+# 2012-06-02
+#	* add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord,
+#	  analysis by Martin Husemann).
+#	* add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by
+#	  Onno van der Linden).
+#	* add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD
+#	* add kdch1, etc., to qvt108 -TD
+#	* add dl1/il1 to some entries based on dl/il values -TD
+#	* add dl to simpleterm -TD
+#
+# 2012-06-10
+#	* modify some older xterm entries to align with xterm source -TD
+#	* separate "xterm-old" alias from "xterm-r6" -TD
+#
+# 2012-07-28
+#	* add E3 to xterm-basic and putty -TD
+#
+# 2012-08-11
+#	* add nsterm-256color, make this the default nsterm -TD
+#	* remove bw from nsterm-bce, per testing with tack -TD
+#
+# 2012-10-12
+#       * add vte-2012, gnome-2012, making these the defaults for vte/gnome
+#	  (patch by Christian Persch).
+#
+# 2012-11-02
+#	* reviewed vte-2012, reverted most of the change since it was incorrect
+#	  based on testing with tack -TD
+#	* un-cancel the initc in vte-256color, since this was implemented
+#	  starting with version 0.20 in 2009 -TD
+#
+# 2013-03-16
+#	* correct typo in sgr string for sun-color,
+#	  add bold for consistency with sgr,
+#	  change smso for consistency with sgr -TD
+#	* correct typo in sgr string for terminator -TD
+#	* add blink to the attributes masked by ncv in linux-16color (report
+#	  by Benjamin Sittler)
+#
+# 2013-03-23
+#	* change initialization for vt220, similar entries for consistency
+#	  with cursor-key strings (NetBSD #47674) -TD
+#	* further improvements to linux-16color (Benjamin Sittler)
+#
+# 2013-05-11
+#	* move nsterm-related entries out of "obsolete" section to more
+#	  plausible "ansi consoles" -TD
+#	* additional cleanup of table-of-contents by reordering -TD
+#
+# 2013-06-07
+#	* added note to clarify Terminal.app's non-emulation of the various
+#	  terminal types listed in the preferences dialog -TD
+#
+# 2013-11-02
+#	* use TS extension to describe xterm's title-escapes -TD
+#	* modify terminator and nsterm-s to use xterm+sl-twm building block -TD
+#	* update hurd.ti, add xenl to reflect 2011-03-06 change in
+#	  http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c
+#	  (Debian #727119).
+#	* simplify pfkey expression in ansi.sys -TD
+#
+# 2013-11-10
+#	* split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD
+#
+# 2014-02-22
+#	* updated notes for wsvt25 based on tack and vttest -TD
+#	* add teken entry to show actual properties of FreeBSD's "xterm"
+#	  console -TD
+#
+# 2014-03-22
+#	* add terminology entry -TD
+#	* add mlterm3 entry, use that as "mlterm" -TD
+#	* inherit mlterm-256color from mlterm -TD
+#
+# 2014-03-23
+#	* fix typo in "mlterm" entry (report by Gabriele Balducci) -TD
+#
+# 2014-03-30
+#	* cancel ccc in putty-256color and konsole-256color for consistency
+#	  with the cancelled initc capability (patch by Sven Zuhlsdorf).
+#	* add xterm+256setaf building block for various terminals which only
+#	  get the 256-color feature half-implemented -TD
+#	* updated "st" entry (leaving the 0.1.1 version as "simpleterm") to
+#	  0.4.1 -TD
+#
+# 2014-05-03
+#	* add vt520ansi (Mike Gran)
+#
+# 2014-05-24
+#	* correct several entries which had termcap-style padding used in
+#	  terminfo: adm21, aj510, alto-h19, att605-pc, x820 -TD
+#	* correct syntax for padding in some entries: dg211, h19 -TD
+#	* correct ti924-8 which had confused padding versus octal escapes -TD
+#	* correct padding in sbi entry -TD
+#
+# 2014-06-07
+#	* update xterm-new to patch #305 -TD
+#	+ change screen's smso to use SGR 7 (ECMA-80 reverse) rather than SGR 3
+#	  (italic).  This was a long-ago typo in screen 3.1.1 which was
+#	  overlooked until a few terminal emulators implemented the feature -TD
+#
+# 2014-06-09
+#	> fix regression in screen terminfo entries (reports by Christian
+#	  Ebert, Gabriele Balducci) -TD
+#	+ revert the change to screen; see notes for why this did not work -TD
+#	+ cancel sitm/ritm for entries which extend "screen", to work around
+#	  screen's hardcoded behavior for SGR 3 -TD
+#
+# 2014-06-14
+#	+ modify sgr for screen.xterm-new to support dim capability -TD
+#	+ add dim capability to nsterm+7 -TD
+#	+ cancel dim capability for iterm -TD
+#	+ add dim, invis capabilities to vte-2012 -TD
+#	+ add sitm/ritm to konsole-base and mlterm3 -TD
+#
+# 2014-10-06
+#	+ add xterm-1005 and xterm-1006 entries, with suggested extension
+#	  capability "xm" -TD
+#
+# 2014-10-07
+#	+ update test-report for mrxvt -TD
+#
+# 2014-10-11
+#	+ add xterm-x10mouse, xterm-x11mouse, etc. -TD
+#
+# 2014-10-18
+#	+ reviewed terminology 0.6.1, add function key definitions.  None of
+#	  the vt100-compatibility issues were improved -TD
+#
+# 2015-04-22
+#	+ add 'dim' capability to screen entry (report by Leonardo B Schenkel)
+#	+ add several key definitions to nsterm-bce to match preconfigured
+#	  keys, e.g., with OSX 10.9 and 10.10 (report by Leonardo B Schenkel)
+#
+# 2015-05-02
+#	+ remove unnecessary ';' from E3 capabilities -TD
+#	+ add tmux entry, derived from screen (patch by Nicholas Marriott).
+#	+ split-out recent change to nsterm-bce as nsterm-build326, and add
+#	  nsterm-build342 to reflect changes with successive releases of OSX
+#	  (discussion with Leonardo B Schenkel)
+#	+ add xon, ich1, il1 to ibm3161 (patch by Stephen Powell,
+#	  Debian #783806)
+#
+# 2015-05-17
+#	+ remove screen-bce.mlterm, since mlterm does not do "bce" -TD
+#	+ add several screen.XXX entries to support the respective variations
+#	  for 256 colors -TD
+#
+# 2015-05-23
+#	+ add putty+fnkeys* building-block entries -TD
+#
+# 2015-05-30
+#	+ remove spurious "%;" from st entry (report by Daniel Pitts) -TD
+#	+ add vte-2014, update vte to use that -TD
+#
+# 2015-06-27
+#	+ comment-out "screen.xterm" entry, and inherit screen.xterm-256color
+#	  from xterm-new (report by Richard Birkett) -TD
+#
+# 2015-07-25
+#	+ add status line to tmux via xterm+sl (patch by Nicholas Marriott).
+#	+ fixes for st 0.5 from testing with tack -TD
+#
 ######## SHANTIH!  SHANTIH!  SHANTIH!