Regenerate headers and source files
Commands used:
./configure --with-terminfo-dirs=/system_ext/etc/terminfo --with-default-terminfo-dir=$PWD/lib/terminfo
pushd misc ; sh run_tic.sh ; popd
./configure --enable-tcap-names --with-terminfo-dirs=/system_ext/etc/terminfo --with-default-terminfo-dir=/system_ext/etc/terminfo
make -j
for f in `find lib/terminfo -type l`; do cp $f $f.tmp; mv $f.tmp $f; done
Change-Id: I3f94b3a76ab18184638f52fbb5bd760996794f9a
Signed-off-by: micky387 <mickaelsaibi@free.fr>
diff --git a/misc/ncurses-config b/misc/ncurses-config
new file mode 100644
index 0000000..7bbd33b
--- /dev/null
+++ b/misc/ncurses-config
@@ -0,0 +1,331 @@
+#!/bin/sh
+# $Id: ncurses-config.in,v 1.52 2022/07/26 21:36:28 tom Exp $
+##############################################################################
+# Copyright 2018-2021,2022 Thomas E. Dickey #
+# Copyright 2006-2015,2017 Free Software Foundation, Inc. #
+# #
+# Permission is hereby granted, free of charge, to any person obtaining a #
+# copy of this software and associated documentation files (the "Software"), #
+# to deal in the Software without restriction, including without limitation #
+# the rights to use, copy, modify, merge, publish, distribute, distribute #
+# with modifications, sublicense, and/or sell copies of the Software, and to #
+# permit persons to whom the Software is furnished to do so, subject to the #
+# following conditions: #
+# #
+# The above copyright notice and this permission notice shall be included in #
+# all copies or substantial portions of the Software. #
+# #
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR #
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, #
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL #
+# THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER #
+# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING #
+# FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER #
+# DEALINGS IN THE SOFTWARE. #
+# #
+# Except as contained in this notice, the name(s) of the above copyright #
+# holders shall not be used in advertising or otherwise to promote the sale, #
+# use or other dealings in this Software without prior written #
+# authorization. #
+##############################################################################
+#
+# Author: Thomas E. Dickey, 2006-on
+
+LANG=C; export LANG
+LANGUAGE=C; export LANGUAGE
+LC_ALL=C; export LC_ALL
+LC_CTYPE=C; export LC_CTYPE
+
+prefix="/usr"
+exec_prefix="${prefix}"
+
+bindir="${exec_prefix}/bin"
+includedir="${prefix}/include"
+libdir="${exec_prefix}/lib"
+datarootdir="${prefix}/share"
+datadir="${datarootdir}"
+mandir="${datarootdir}/man"
+
+THIS="ncursesw"
+TINFO_LIB="ncursesw"
+RPATH_LIST="${libdir}"
+
+includesubdir="${prefix}/include/${THIS}"
+
+# Ensure that RPATH_LIST contains only absolute pathnames, if it is nonempty.
+# We cannot filter it out within the build-process since the variable is used
+# in some special cases of installation using a relative path.
+if [ -n "$RPATH_LIST" ]
+then
+ save_IFS="$IFS"
+ IFS=':'
+ filtered=
+ for item in $RPATH_LIST
+ do
+ case "$item" in
+ ./*|../*|*/..|*/../*)
+ ;;
+ *)
+ [ -n "$filtered" ] && filtered="${filtered}:"
+ filtered="${filtered}${item}"
+ ;;
+ esac
+ done
+ IFS="$save_IFS"
+ # if the result is empty, there is little we can do to fix it
+ RPATH_LIST="$filtered"
+fi
+
+# with --disable-overwrite, we installed into a subdirectory, but transformed
+# the headers to include like this:
+# <ncursesw/curses.h>
+if [ xyes = xno ]; then
+ case $includedir in
+ $prefix/include/ncursesw)
+ includedir=`echo "$includedir" | sed -e 's,/[^/]*$,,'`
+ ;;
+ esac
+fi
+
+LIBS=""
+if [ "ncurses" = "ncurses" ]; then
+ LIBS="-l${THIS} $LIBS"
+else
+ LIBS="-l${THIS} -l${TINFO_LIB} $LIBS"
+fi
+
+# Ignore -L options which do not correspond to an actual directory, or which
+# are standard library directories (i.e., the linker is supposed to search
+# those directories).
+#
+# There is no portable way to find the list of standard library directories.
+# Require a POSIX shell anyway, to keep this simple.
+lib_flags=
+for opt in -L$libdir $LIBS
+do
+ case $opt in
+ -specs*) # ignore linker specs-files which were used to build library
+ continue
+ ;;
+ -Wl,-z,*) # ignore flags used to manipulate shared image
+ continue
+ ;;
+ -Wl,--dynamic-linker*) # ignore ELF interpreter
+ continue
+ ;;
+ -Wl,--as-needed|-Wl,--build-id=*|-Wl,-dT,*|-Wl,-T,*)
+ continue
+ ;;
+ -L*)
+ lib_check=`echo "x$opt" | sed -e 's/^.-L//'`
+ [ -d "$lib_check" ] || continue
+ case "$lib_check" in
+ /lib/x86_64-linux-gnu|/usr/lib/x86_64-linux-gnu|/lib64|/usr/lib64|/usr/local/lib|/lib|/usr/lib) # skip standard libdir
+ if [ "$lib_check" = "$libdir" ]
+ then
+ lib_first=yes
+ IFS_save="$IFS"
+ IFS='|'
+ LIBDIRS="/lib/x86_64-linux-gnu|/usr/lib/x86_64-linux-gnu|/lib64|/usr/lib64|/usr/local/lib|/lib|/usr/lib"
+ for lib_check in $LIBDIRS
+ do
+ if [ -d "$lib_check" ]
+ then
+ if [ "$lib_check" != "$libdir" ]
+ then
+ lib_first=no
+ fi
+ break
+ fi
+ done
+ IFS="$IFS_save"
+ [ $lib_first = yes ] && continue
+ found=no
+ for check in $lib_flags
+ do
+ if [ "x$check" = "x$opt" ]
+ then
+ found=yes
+ break
+ fi
+ done
+ [ $found = yes ] && continue
+ :
+ else
+ continue
+ fi
+ ;;
+ *)
+ found=no
+ for check in $lib_flags
+ do
+ if [ "x$check" = "x$opt" ]
+ then
+ found=yes
+ break
+ fi
+ done
+ [ $found = yes ] && continue
+ ;;
+ esac
+ ;;
+ esac
+ lib_flags="$lib_flags $opt"
+done
+
+[ $# = 0 ] && exec /bin/sh "$0" --error
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ # basic configuration
+ --prefix)
+ echo "$prefix"
+ ;;
+ --exec-prefix)
+ echo "$exec_prefix"
+ ;;
+ # compile/link
+ --cflags)
+ INCS=" -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600"
+ if [ "xyes" = xno ]; then
+ INCS="$INCS -I${includesubdir}"
+ fi
+ if [ "${includedir}" != /usr/include ]; then
+ INCS="$INCS -I${includedir}"
+ fi
+ sed -e 's,^[ ]*,,' -e 's, [ ]*, ,g' -e 's,[ ]*$,,' <<-ENDECHO
+ $INCS
+ENDECHO
+ ;;
+ --libs)
+ OPTS=
+ for opt in $lib_flags
+ do
+ [ -n "$OPTS" ] && OPTS="$OPTS "
+ OPTS="${OPTS}${opt}"
+ done
+ printf '%s\n' "$OPTS"
+ ;;
+ --libs-only-L)
+ OPTS=
+ for opt in $lib_flags
+ do
+ case "x$opt" in
+ x-L*)
+ [ -n "$OPTS" ] && OPTS="$OPTS "
+ OPTS="${OPTS}${opt}"
+ ;;
+ esac
+ done
+ printf '%s\n' "$OPTS"
+ ;;
+ --libs-only-l)
+ OPTS=
+ for opt in $lib_flags
+ do
+ case "x$opt" in
+ x-l*)
+ [ -n "$OPTS" ] && OPTS="$OPTS "
+ OPTS="${OPTS}${opt}"
+ ;;
+ esac
+ done
+ printf '%s\n' "$OPTS"
+ ;;
+ --libs-only-other)
+ OPTS=
+ for opt in $lib_flags
+ do
+ case "x$opt" in
+ x-[lL]*)
+ ;;
+ *)
+ [ -n "$OPTS" ] && OPTS="$OPTS "
+ OPTS="${OPTS}${opt}"
+ ;;
+ esac
+ done
+ printf '%s\n' "$OPTS"
+ ;;
+ # identification
+ --version)
+ echo "6.5.20240427"
+ ;;
+ --abi-version)
+ echo "6"
+ ;;
+ --mouse-version)
+ echo "2"
+ ;;
+ # locations
+ --bindir)
+ echo "${bindir}"
+ ;;
+ --datadir)
+ echo "${datadir}"
+ ;;
+ --includedir)
+ INCS=
+ if [ "xyes" = xno ]; then
+ INCS="${includesubdir}"
+ elif [ "${includedir}" != /usr/include ]; then
+ INCS="${includedir}"
+ fi
+ echo "$INCS"
+ ;;
+ --libdir)
+ echo "${libdir}"
+ ;;
+ --mandir)
+ echo "${mandir}"
+ ;;
+ --terminfo)
+ echo "/system_ext/etc/terminfo"
+ ;;
+ --terminfo-dirs)
+ echo "/system_ext/etc/terminfo"
+ ;;
+ --termpath)
+ echo ""
+ ;;
+ # general info
+ --help)
+ cat <<ENDHELP
+Usage: `basename "$0"` [options]
+
+Options:
+ --prefix echos the package-prefix of ${THIS}
+ --exec-prefix echos the executable-prefix of ${THIS}
+
+ --cflags echos the C compiler flags needed to compile with ${THIS}
+ --libs echos the libraries needed to link with ${THIS}
+
+ --libs-only-L echos -L linker options (search path) for ${THIS}
+ --libs-only-l echos -l linker options (libraries) for ${THIS}
+ --libs-only-other echos linker options other than -L/-l
+
+ --version echos the release+patchdate version of ${THIS}
+ --abi-version echos the ABI version of ${THIS}
+ --mouse-version echos the mouse-interface version of ${THIS}
+
+ --bindir echos the directory containing ${THIS} programs
+ --datadir echos the directory containing ${THIS} data
+ --includedir echos the directory containing ${THIS} header files
+ --libdir echos the directory containing ${THIS} libraries
+ --mandir echos the directory containing ${THIS} manpages
+ --terminfo echos the \$TERMINFO terminfo database path
+ --terminfo-dirs echos the \$TERMINFO_DIRS directory list
+ --termpath echos the \$TERMPATH termcap list
+
+ --help prints this message
+ENDHELP
+ ;;
+ --error|*)
+ /bin/sh "$0" --help 1>&2
+ exit 1
+ ;;
+ esac
+ shift
+done
+# vi:ts=4 sw=4
+# vile:shmode