Revert "nfc: enable nfc debugging for usedebug builds"
This reverts commit 3d9d28975611188bdc3718dd6341da2f5504fe86.
Reason for revert: b/206628348
Change-Id: Ia44eddb472fffece015a64993a8bc38727e0fd57
diff --git a/device-raven.mk b/device-raven.mk
index 41269e6..632ee55 100644
--- a/device-raven.mk
+++ b/device-raven.mk
@@ -134,17 +134,9 @@
frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
frameworks/native/data/etc/android.hardware.nfc.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.uicc.xml \
- frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml
-
-ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
-PRODUCT_COPY_FILES += \
- device/google/raviole/nfc/libnfc-hal-st-debug.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
- device/google/raviole/nfc/libnfc-nci-raven-debug.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
-else
-PRODUCT_COPY_FILES += \
+ frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
device/google/raviole/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
device/google/raviole/nfc/libnfc-nci-raven.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
-endif
PRODUCT_PACKAGES += \
NfcNci \
diff --git a/nfc/libnfc-hal-st-debug.conf b/nfc/libnfc-hal-st-debug.conf
deleted file mode 100644
index 3b3e1ee..0000000
--- a/nfc/libnfc-hal-st-debug.conf
+++ /dev/null
@@ -1,159 +0,0 @@
-########################### Start of libnf-hal-st_aosp.conf ###########################
-
-###############################################################################
-###############################################################################
-# ST HAL trace log level
-STNFC_HAL_LOGLEVEL=4
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# Vendor specific mode to enable FW (RF & SWP) traces.
-STNFC_FW_DEBUG_ENABLED=1
-
-###############################################################################
-# File used for NFA storage
-NFA_STORAGE="/data/nfc"
-
-###############################################################################
-# Keep the nfa storage file.
-PRESERVE_STORAGE=1
-
-###############################################################################
-# In Switch OFF mode (phone switched-off), specify the desired CE mode to
-# the controller.
-# 0: No card-emulation; DEFAULT
-# 1: Switch-off card-emulation enabled
-CE_ON_SWITCH_OFF_STATE=1
-
-###############################################################################
-# Vendor specific mode to support the USB charging mode if VPSIO=1 in switch off.
-STNFC_USB_CHARGING_MODE=1
-
-###############################################################################
-# Vendor Specific Proprietary Protocol & Discovery Configuration
-# Set to 0xFF if unsupported
-# byte[0] NCI_PROTOCOL_18092_ACTIVE
-# byte[1] NCI_PROTOCOL_B_PRIME
-# byte[2] NCI_PROTOCOL_DUAL
-# byte[3] NCI_PROTOCOL_15693
-# byte[4] NCI_PROTOCOL_KOVIO
-# byte[5] NCI_PROTOCOL_MIFARE
-# byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
-# byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
-# byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
-NFA_PROPRIETARY_CFG={05:FF:FF:06:8A:90:77:FF:FF}
-
-###############################################################################
-# Choose the presence-check algorithm for type-4 tag. If not defined,
-# the default value is 1.
-# 0 NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
-# 1 NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
-# 2 NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate
-# 3 NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0
-# 4 NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3
-# 5 NFA_RW_PRES_CHK_ISO_DEP_NAK; presence check command ISO-DEP NAK as per NCI2.0
-PRESENCE_CHECK_ALGORITHM=5
-
-###############################################################################
-# Name of the NCI HAL module to use
-# If unset, falls back to nfc_nci.bcm2079x
-NCI_HAL_MODULE="nfc_nci.st21nfc"
-
-###############################################################################
-# Allow list to be set at startup.
-DEVICE_HOST_ALLOW_LIST={02:C0}
-
-###############################################################################
-# BAIL OUT value for P2P
-# Implements algorithm for NFC-DEP protocol priority over ISO-DEP protocol.
-POLL_BAIL_OUT_MODE=1
-
-###############################################################################
-# Extended APDU length for ISO_DEP
-ISO_DEP_MAX_TRANSCEIVE=0xFEFF
-
-###############################################################################
-# Configure the NFC Extras to open and use a static pipe. If the value is
-# not set or set to 0, then the default is use a dynamic pipe based on a
-# destination gate (see NFA_HCI_DEFAULT_DEST_GATE). Note there is a value
-# for each EE (ESE/SIM)
-OFF_HOST_ESE_PIPE_ID=0x5E
-OFF_HOST_SIM_PIPE_ID=0x3E
-
-###############################################################################
-#Set the default Felica T3T System Code OffHost route Location :
-#This settings will be used when application does not set this parameter
-# host 0x00
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_SYS_CODE_ROUTE=0x86
-
-###############################################################################
-#Set the Felica T3T System Code supported power state:
-DEFAULT_SYS_CODE_PWR_STATE=0x3B
-
-###############################################################################
-# Path and Files used for FW update binaries storage
-STNFC_FW_PATH_STORAGE="/vendor/firmware"
-STNFC_FW_BIN_NAME="/st54j_fw.bin"
-STNFC_FW_CONF_NAME="/st54j_conf.bin"
-
-###############################################################################
-# Default off-host route for Felica.
-# This settings will be used when application does not set this parameter
-# host 0x00
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_NFCF_ROUTE=0x86
-
-###############################################################################
-# Configure the default off-host route.
-# used for technology A and B routing
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_OFFHOST_ROUTE=0x81
-
-###############################################################################
-# Configure the default AID route.
-# host 0x00
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_ROUTE=0x00
-
-###############################################################################
-# Configure the NFCEEIDs of offhost UICC.
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-OFFHOST_ROUTE_UICC={81}
-
-###############################################################################
-# Configure the NFCEEIDs of offhost eSEs.
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-OFFHOST_ROUTE_ESE={86}
-
-###############################################################################
-# Configure the list of NFCEE for the ISO-DEP routing.
-# host 0x00
-# eSE 0x82 (eSE), 0x86 (eUICC/SPI-SE)
-# UICC 0x81 (UICC_1), 0x85 (UICC_2)
-DEFAULT_ISODEP_ROUTE=0x81
-
-###############################################################################
-# Configure the HAL Clock control
-# enable 0x01
-# disable 0x00 default value
-STNFC_CONTROL_CLK=0x01
-
-################################################################################
-# Configure the ACTIVE_RW timer
-# Default 0x00, set 0x01 to enable it
-STNFC_ACTIVERW_TIMER=0x01
-
-################################################################################
-# Core configuration settings
-CORE_CONF_PROP={ 20, 02, 0a, 03,
- a1, 01, 1e,
- a2, 01, 19,
- 80, 01, 01
-}
-
-
diff --git a/nfc/libnfc-nci-raven-debug.conf b/nfc/libnfc-nci-raven-debug.conf
deleted file mode 100644
index e530888..0000000
--- a/nfc/libnfc-nci-raven-debug.conf
+++ /dev/null
@@ -1,121 +0,0 @@
-###############################################################################
-# Application options
-NFC_DEBUG_ENABLED=1
-
-###############################################################################
-# File used for NFA storage
-NFA_STORAGE="/data/nfc"
-
-###############################################################################
-# Force UICC to only listen to the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
-UICC_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# Set HOST default listen to the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F
-# 0x07 = A + B + F
-HOST_LISTEN_TECH_MASK=0x07
-
-###############################################################################
-# AID for Empty Select command
-# If specified, this AID will be substituted when an Empty SELECT command is
-# detected. The first byte is the length of the AID. Maximum length is 16.
-AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
-
-###############################################################################
-# When screen is turned off, specify the desired power state of the controller.
-# 0: power-off-sleep state; DEFAULT
-# 1: full-power state
-# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
-SCREEN_OFF_POWER_STATE=1
-
-###############################################################################
-# Force tag polling for the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
-# NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
-# NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
-# NFA_TECHNOLOGY_MASK_ACTIVE
-#
-# Notable bits:
-# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
-# NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */
-# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
-# NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */
-# NFA_TECHNOLOGY_MASK_KOVIO 0x20 /* Proprietary Technology */
-# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */
-POLLING_TECH_MASK=0x2F
-
-###############################################################################
-# Force P2P to only listen for the following technology(s).
-# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
-# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
-# NFA_TECHNOLOGY_MASK_ACTIVE
-#
-# Notable bits:
-# NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */
-# NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */
-# NFA_TECHNOLOGY_MASK_ACTIVE 0x40 /* NFC Technology Active */
-P2P_LISTEN_TECH_MASK=0x00
-
-PRESERVE_STORAGE=0x01
-
-###############################################################################
-# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
-# The value is set to 3 by default as it assumes we will discover 0xF2,
-# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
-# so that the stack will not wait any longer than necessary.
-# Maximum EE supported number
-# NXP PN547C2 0x02
-# NXP PN65T 0x03
-# NXP PN548C2 0x02
-# NXP PN66T 0x03
-NFA_MAX_EE_SUPPORTED=0x02
-
-###############################################################################
-# AID_MATCHING constants
-# AID_MATCHING_EXACT_ONLY 0x00
-# AID_MATCHING_EXACT_OR_PREFIX 0x01
-# AID_MATCHING_PREFIX_ONLY 0x02
-# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
-AID_MATCHING_MODE=0x03
-
-###############################################################################
-#Set the default Felica T3T System Code :
-#This settings will be used when application does not set this parameter
-DEFAULT_SYS_CODE={FE:FE}
-
-###############################################################################
-# Value of NIC parameter NFCC_COFNIG_CONTROL
-# 0x00 NFCC is not allowed to manage RF configuration
-# 0x01 NFCC is allowed to manage RF configuration
-NFCC_CONFIG_CONTROL=0x01
-
-###############################################################################
-#Set if the AID routing should be blocked for the power modes not supported.
-NFA_AID_BLOCK_ROUTE=1
-
-###############################################################################
-#Set the OffHost AID supported power state:
-OFFHOST_AID_ROUTE_PWR_STATE=0x3B
-
-###############################################################################
-# Mifare Tag implementation
-# 0: General implementation
-# 1: Legacy implementation
-LEGACY_MIFARE_READER=0
-
-###############################################################################
-# Nfc recovery implementation
-# 0: Crash Nfc Service
-# 1: Toggle Nfc state
-RECOVERY_OPTION=1
-
-###############################################################################
-# NFCEE Power Supply and Communication Link Control Configuration
-# Set when SetAlwaysOn enabled
-# Default 0x00 when SetAlways on disabled
-ALWAYS_ON_SET_EE_POWER_AND_LINK_CONF=0x03