diff --git a/audio/oriole/config/audio_policy_configuration.xml b/audio/oriole/config/audio_policy_configuration.xml
index 1dcb956..1e71bf3 100644
--- a/audio/oriole/config/audio_policy_configuration.xml
+++ b/audio/oriole/config/audio_policy_configuration.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/oriole/config/audio_policy_configuration_a2dp_offload_disabled.xml b/audio/oriole/config/audio_policy_configuration_a2dp_offload_disabled.xml
index 38cad6f..688fc50 100644
--- a/audio/oriole/config/audio_policy_configuration_a2dp_offload_disabled.xml
+++ b/audio/oriole/config/audio_policy_configuration_a2dp_offload_disabled.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/oriole/config/audio_policy_configuration_bluetooth_legacy_hal.xml b/audio/oriole/config/audio_policy_configuration_bluetooth_legacy_hal.xml
index a8356bd..cd4945b 100644
--- a/audio/oriole/config/audio_policy_configuration_bluetooth_legacy_hal.xml
+++ b/audio/oriole/config/audio_policy_configuration_bluetooth_legacy_hal.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/oriole/config/sound_trigger_configuration.xml b/audio/oriole/config/sound_trigger_configuration.xml
index a592910..dbee090 100644
--- a/audio/oriole/config/sound_trigger_configuration.xml
+++ b/audio/oriole/config/sound_trigger_configuration.xml
@@ -28,5 +28,6 @@
     <supported_model>
         <model name="CLIENT_HOTWORD" uuid="7038ddc8-30f2-11e6-b0ac-40a8f03d3f15" model_type="keyphrase" bargein="true"/>
         <model name="CLIENT_AMBIENT_MUSIC" uuid="9f6ad62a-1f0b-11e7-87c5-40a8f03d3f15" model_type="generic" bargein="false"/>
+        <model name="CLIENT_AMBIENT_MUSIC_BREAK" uuid="12caddb1-acdb-4dce-8cb0-2e95a2313aee" model_type="generic" bargein="false"/>
     </supported_model>
 </sound_trigger_hal_configuration>
diff --git a/audio/raven/config/audio_policy_configuration.xml b/audio/raven/config/audio_policy_configuration.xml
index 1dcb956..1e71bf3 100644
--- a/audio/raven/config/audio_policy_configuration.xml
+++ b/audio/raven/config/audio_policy_configuration.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/raven/config/audio_policy_configuration_a2dp_offload_disabled.xml b/audio/raven/config/audio_policy_configuration_a2dp_offload_disabled.xml
index 38cad6f..688fc50 100644
--- a/audio/raven/config/audio_policy_configuration_a2dp_offload_disabled.xml
+++ b/audio/raven/config/audio_policy_configuration_a2dp_offload_disabled.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/raven/config/audio_policy_configuration_bluetooth_legacy_hal.xml b/audio/raven/config/audio_policy_configuration_bluetooth_legacy_hal.xml
index a8356bd..cd4945b 100644
--- a/audio/raven/config/audio_policy_configuration_bluetooth_legacy_hal.xml
+++ b/audio/raven/config/audio_policy_configuration_bluetooth_legacy_hal.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/raven/config/sound_trigger_configuration.xml b/audio/raven/config/sound_trigger_configuration.xml
index a592910..dbee090 100644
--- a/audio/raven/config/sound_trigger_configuration.xml
+++ b/audio/raven/config/sound_trigger_configuration.xml
@@ -28,5 +28,6 @@
     <supported_model>
         <model name="CLIENT_HOTWORD" uuid="7038ddc8-30f2-11e6-b0ac-40a8f03d3f15" model_type="keyphrase" bargein="true"/>
         <model name="CLIENT_AMBIENT_MUSIC" uuid="9f6ad62a-1f0b-11e7-87c5-40a8f03d3f15" model_type="generic" bargein="false"/>
+        <model name="CLIENT_AMBIENT_MUSIC_BREAK" uuid="12caddb1-acdb-4dce-8cb0-2e95a2313aee" model_type="generic" bargein="false"/>
     </supported_model>
 </sound_trigger_hal_configuration>
diff --git a/audio/slider/config/audio_policy_configuration.xml b/audio/slider/config/audio_policy_configuration.xml
index 1dcb956..1e71bf3 100644
--- a/audio/slider/config/audio_policy_configuration.xml
+++ b/audio/slider/config/audio_policy_configuration.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/slider/config/audio_policy_configuration_a2dp_offload_disabled.xml b/audio/slider/config/audio_policy_configuration_a2dp_offload_disabled.xml
index 38cad6f..688fc50 100644
--- a/audio/slider/config/audio_policy_configuration_a2dp_offload_disabled.xml
+++ b/audio/slider/config/audio_policy_configuration_a2dp_offload_disabled.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/slider/config/audio_policy_configuration_bluetooth_legacy_hal.xml b/audio/slider/config/audio_policy_configuration_bluetooth_legacy_hal.xml
index a8356bd..cd4945b 100644
--- a/audio/slider/config/audio_policy_configuration_bluetooth_legacy_hal.xml
+++ b/audio/slider/config/audio_policy_configuration_bluetooth_legacy_hal.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="haptic" role="source">
diff --git a/audio/slider/config/sound_trigger_configuration.xml b/audio/slider/config/sound_trigger_configuration.xml
index a592910..dbee090 100644
--- a/audio/slider/config/sound_trigger_configuration.xml
+++ b/audio/slider/config/sound_trigger_configuration.xml
@@ -28,5 +28,6 @@
     <supported_model>
         <model name="CLIENT_HOTWORD" uuid="7038ddc8-30f2-11e6-b0ac-40a8f03d3f15" model_type="keyphrase" bargein="true"/>
         <model name="CLIENT_AMBIENT_MUSIC" uuid="9f6ad62a-1f0b-11e7-87c5-40a8f03d3f15" model_type="generic" bargein="false"/>
+        <model name="CLIENT_AMBIENT_MUSIC_BREAK" uuid="12caddb1-acdb-4dce-8cb0-2e95a2313aee" model_type="generic" bargein="false"/>
     </supported_model>
 </sound_trigger_hal_configuration>
diff --git a/audio/whitefin/config/audio_policy_configuration.xml b/audio/whitefin/config/audio_policy_configuration.xml
index 64081e8..6da94d2 100644
--- a/audio/whitefin/config/audio_policy_configuration.xml
+++ b/audio/whitefin/config/audio_policy_configuration.xml
@@ -36,7 +36,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="raw" role="source" flags="AUDIO_OUTPUT_FLAG_RAW|AUDIO_OUTPUT_FLAG_FAST">
diff --git a/audio/whitefin/config/audio_policy_configuration_a2dp_offload_disabled.xml b/audio/whitefin/config/audio_policy_configuration_a2dp_offload_disabled.xml
index 86ccf13..cd93777 100644
--- a/audio/whitefin/config/audio_policy_configuration_a2dp_offload_disabled.xml
+++ b/audio/whitefin/config/audio_policy_configuration_a2dp_offload_disabled.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="raw" role="source" flags="AUDIO_OUTPUT_FLAG_RAW|AUDIO_OUTPUT_FLAG_FAST">
diff --git a/audio/whitefin/config/audio_policy_configuration_bluetooth_legacy_hal.xml b/audio/whitefin/config/audio_policy_configuration_bluetooth_legacy_hal.xml
index ece3466..7614235 100644
--- a/audio/whitefin/config/audio_policy_configuration_bluetooth_legacy_hal.xml
+++ b/audio/whitefin/config/audio_policy_configuration_bluetooth_legacy_hal.xml
@@ -34,7 +34,16 @@
                 <mixPort name="compressed_offload" role="source"
                          flags="AUDIO_OUTPUT_FLAG_DIRECT|AUDIO_OUTPUT_FLAG_COMPRESS_OFFLOAD|AUDIO_OUTPUT_FLAG_NON_BLOCKING">
                     <profile name="" format="AUDIO_FORMAT_MP3"
-                             samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_LC"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V1"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
+                             channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
+                    <profile name="" format="AUDIO_FORMAT_AAC_HE_V2"
+                             samplingRates="8000,16000,24000,32000,44100,48000"
                              channelMasks="AUDIO_CHANNEL_OUT_STEREO,AUDIO_CHANNEL_OUT_MONO"/>
                 </mixPort>
                 <mixPort name="raw" role="source" flags="AUDIO_OUTPUT_FLAG_RAW|AUDIO_OUTPUT_FLAG_FAST">
diff --git a/audio/whitefin/config/sound_trigger_configuration.xml b/audio/whitefin/config/sound_trigger_configuration.xml
index a592910..dbee090 100644
--- a/audio/whitefin/config/sound_trigger_configuration.xml
+++ b/audio/whitefin/config/sound_trigger_configuration.xml
@@ -28,5 +28,6 @@
     <supported_model>
         <model name="CLIENT_HOTWORD" uuid="7038ddc8-30f2-11e6-b0ac-40a8f03d3f15" model_type="keyphrase" bargein="true"/>
         <model name="CLIENT_AMBIENT_MUSIC" uuid="9f6ad62a-1f0b-11e7-87c5-40a8f03d3f15" model_type="generic" bargein="false"/>
+        <model name="CLIENT_AMBIENT_MUSIC_BREAK" uuid="12caddb1-acdb-4dce-8cb0-2e95a2313aee" model_type="generic" bargein="false"/>
     </supported_model>
 </sound_trigger_hal_configuration>
diff --git a/conf/init.oriole.rc b/conf/init.oriole.rc
index 4abb1c2..cfe3106 100644
--- a/conf/init.oriole.rc
+++ b/conf/init.oriole.rc
@@ -26,4 +26,4 @@
 on fs
     # Fingerprint
     chown system system /dev/goodix_fp
-    exec_background /vendor/bin/trusty_apploader /vendor/firmware/g6.app
+    exec_background - system shell -- /vendor/bin/trusty_apploader /vendor/firmware/g6.app
diff --git a/conf/init.raven.rc b/conf/init.raven.rc
index 30cfbf5..2c5db8d 100644
--- a/conf/init.raven.rc
+++ b/conf/init.raven.rc
@@ -26,7 +26,7 @@
 on fs
     # Fingerprint
     chown system system /dev/goodix_fp
-    exec_background /vendor/bin/trusty_apploader /vendor/firmware/g6.app
+    exec_background - system shell -- /vendor/bin/trusty_apploader /vendor/firmware/g6.app
 
 on property:mfgapi.touchpanel.permission=1
     chmod 0600 /sys/devices/virtual/sec/tsp/cmd
diff --git a/device-oriole.mk b/device-oriole.mk
index a0e71f2..4b3308a 100644
--- a/device-oriole.mk
+++ b/device-oriole.mk
@@ -44,7 +44,7 @@
 
 # MIPI Coex Configs
 PRODUCT_COPY_FILES += \
-    device/google/raviole/radio/oriole_display_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_mipi_coex_table.csv
+    device/google/raviole/radio/oriole_display_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv
 
 # Camera
 PRODUCT_COPY_FILES += \
@@ -52,7 +52,10 @@
 
 # NFC
 PRODUCT_COPY_FILES += \
-	device/google/gs101/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf
+	device/google/raviole/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
+	device/google/raviole/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
+
+
 DEVICE_MANIFEST_FILE += \
 	device/google/gs101/nfc/manifest_se_gs101.xml
 
diff --git a/device-raven.mk b/device-raven.mk
index 5f1bf36..b59211a 100644
--- a/device-raven.mk
+++ b/device-raven.mk
@@ -57,7 +57,9 @@
 
 # NFC
 PRODUCT_COPY_FILES += \
-	device/google/gs101/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf
+	device/google/raviole/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
+	device/google/raviole/nfc/libnfc-nci-raven.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
+
 DEVICE_MANIFEST_FILE += \
 	device/google/gs101/nfc/manifest_se_gs101.xml
 
diff --git a/device-slider.mk b/device-slider.mk
index 4443ab4..dd76dc3 100644
--- a/device-slider.mk
+++ b/device-slider.mk
@@ -67,6 +67,8 @@
 
 # NFC
 PRODUCT_COPY_FILES += \
-	device/google/gs101/nfc/libnfc-hal-st-gs101.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf
+	device/google/raviole/nfc/libnfc-hal-st-disable.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
+	device/google/raviole/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf
+
 DEVICE_MANIFEST_FILE += \
 	device/google/gs101/nfc/manifest_se_gs101.xml
diff --git a/nfc/libnfc-hal-st-disable.conf b/nfc/libnfc-hal-st-disable.conf
new file mode 100644
index 0000000..2b455df
--- /dev/null
+++ b/nfc/libnfc-hal-st-disable.conf
@@ -0,0 +1,152 @@
+########################### Start of libnf-hal-st_aosp.conf ###########################
+
+###############################################################################
+###############################################################################
+# ST HAL trace log level
+STNFC_HAL_LOGLEVEL=4
+NFC_DEBUG_ENABLED=1
+
+###############################################################################
+# Vendor specific mode to enable FW (RF & SWP) traces.
+STNFC_FW_DEBUG_ENABLED=0
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# Dev Node used for ST HAL
+ST_NFC_DEV_NODE="/dev/st_no_such_device"
+
+###############################################################################
+# Keep the nfa storage file.
+PRESERVE_STORAGE=1
+
+###############################################################################
+# In Switch OFF mode (phone switched-off), specify the desired CE mode to
+# the controller.
+# 0: No card-emulation; DEFAULT
+# 1: Switch-off card-emulation enabled
+CE_ON_SWITCH_OFF_STATE=1
+
+###############################################################################
+# Vendor specific mode to support the USB charging mode if VPSIO=1 in switch off.
+STNFC_USB_CHARGING_MODE=1
+
+###############################################################################
+# Vendor Specific Proprietary Protocol & Discovery Configuration
+# Set to 0xFF if unsupported
+#  byte[0] NCI_PROTOCOL_18092_ACTIVE
+#  byte[1] NCI_PROTOCOL_B_PRIME
+#  byte[2] NCI_PROTOCOL_DUAL
+#  byte[3] NCI_PROTOCOL_15693
+#  byte[4] NCI_PROTOCOL_KOVIO
+#  byte[5] NCI_PROTOCOL_MIFARE
+#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
+#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
+#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
+NFA_PROPRIETARY_CFG={05:FF:FF:06:8A:90:77:FF:FF}
+
+###############################################################################
+# Choose the presence-check algorithm for type-4 tag.  If not defined,
+# the default value is 1.
+# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
+# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
+# 2  NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate
+# 3  NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0
+# 4  NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3
+# 5  NFA_RW_PRES_CHK_ISO_DEP_NAK; presence check command ISO-DEP NAK as per NCI2.0
+PRESENCE_CHECK_ALGORITHM=5
+
+###############################################################################
+# Name of the NCI HAL module to use
+# If unset, falls back to nfc_nci.bcm2079x
+NCI_HAL_MODULE="nfc_nci.st21nfc"
+
+###############################################################################
+# White list to be set at startup.
+DEVICE_HOST_WHITE_LIST={02:C0}
+
+###############################################################################
+# BAIL OUT value for P2P
+# Implements algorithm for NFC-DEP protocol priority over ISO-DEP protocol.
+POLL_BAIL_OUT_MODE=1
+
+###############################################################################
+# Extended APDU length for ISO_DEP
+ISO_DEP_MAX_TRANSCEIVE=0xFEFF
+
+###############################################################################
+# Configure the NFC Extras to open and use a static pipe.  If the value is
+# not set or set to 0, then the default is use a dynamic pipe based on a
+# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
+# for each EE (ESE/SIM)
+OFF_HOST_ESE_PIPE_ID=0x5E
+OFF_HOST_SIM_PIPE_ID=0x3E
+
+###############################################################################
+#Set the default Felica T3T System Code OffHost route Location :
+#This settings will be used when application does not set this parameter
+# host  0x00
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_SYS_CODE_ROUTE=0x86
+
+###############################################################################
+#Set the Felica T3T System Code supported power state:
+DEFAULT_SYS_CODE_PWR_STATE=0x3B
+
+###############################################################################
+# Path and Files used for FW update binaries storage
+STNFC_FW_PATH_STORAGE="/vendor/firmware"
+STNFC_FW_BIN_NAME="/st54j_fw.bin"
+STNFC_FW_CONF_NAME="/st54j_conf.bin"
+
+###############################################################################
+# Default off-host route for Felica.
+# This settings will be used when application does not set this parameter
+# host  0x00
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_NFCF_ROUTE=0x86
+
+###############################################################################
+# Configure the default off-host route.
+# used for technology A and B routing
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_OFFHOST_ROUTE=0x81
+
+###############################################################################
+# Configure the default AID route.
+# host  0x00
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_ROUTE=0x00
+
+###############################################################################
+# Configure the NFCEEIDs of offhost UICC.
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+OFFHOST_ROUTE_UICC={81}
+
+###############################################################################
+# Configure the NFCEEIDs of offhost eSEs.
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+OFFHOST_ROUTE_ESE={86}
+
+###############################################################################
+# Configure the list of NFCEE for the ISO-DEP routing.
+# host  0x00
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_ISODEP_ROUTE=0x81
+
+###############################################################################
+# Core configuration settings
+CORE_CONF_PROP={ 20, 02, 0a, 03,
+        a1, 01, 1e,
+        a2, 01, 19,
+        80, 01, 01
+}
+
+
diff --git a/nfc/libnfc-hal-st.conf b/nfc/libnfc-hal-st.conf
new file mode 100644
index 0000000..47153d9
--- /dev/null
+++ b/nfc/libnfc-hal-st.conf
@@ -0,0 +1,148 @@
+########################### Start of libnf-hal-st_aosp.conf ###########################
+
+###############################################################################
+###############################################################################
+# ST HAL trace log level
+STNFC_HAL_LOGLEVEL=1
+NFC_DEBUG_ENABLED=0
+
+###############################################################################
+# Vendor specific mode to enable FW (RF & SWP) traces.
+STNFC_FW_DEBUG_ENABLED=0
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# Keep the nfa storage file.
+PRESERVE_STORAGE=1
+
+###############################################################################
+# In Switch OFF mode (phone switched-off), specify the desired CE mode to
+# the controller.
+# 0: No card-emulation; DEFAULT
+# 1: Switch-off card-emulation enabled
+CE_ON_SWITCH_OFF_STATE=1
+
+###############################################################################
+# Vendor specific mode to support the USB charging mode if VPSIO=1 in switch off.
+STNFC_USB_CHARGING_MODE=1
+
+###############################################################################
+# Vendor Specific Proprietary Protocol & Discovery Configuration
+# Set to 0xFF if unsupported
+#  byte[0] NCI_PROTOCOL_18092_ACTIVE
+#  byte[1] NCI_PROTOCOL_B_PRIME
+#  byte[2] NCI_PROTOCOL_DUAL
+#  byte[3] NCI_PROTOCOL_15693
+#  byte[4] NCI_PROTOCOL_KOVIO
+#  byte[5] NCI_PROTOCOL_MIFARE
+#  byte[6] NCI_DISCOVERY_TYPE_POLL_KOVIO
+#  byte[7] NCI_DISCOVERY_TYPE_POLL_B_PRIME
+#  byte[8] NCI_DISCOVERY_TYPE_LISTEN_B_PRIME
+NFA_PROPRIETARY_CFG={05:FF:FF:06:8A:90:77:FF:FF}
+
+###############################################################################
+# Choose the presence-check algorithm for type-4 tag.  If not defined,
+# the default value is 1.
+# 0  NFA_RW_PRES_CHK_DEFAULT; Let stack selects an algorithm
+# 1  NFA_RW_PRES_CHK_I_BLOCK; ISO-DEP protocol's empty I-block
+# 2  NFA_RW_PRES_CHK_RESET; Deactivate to Sleep, then re-activate
+# 3  NFA_RW_PRES_CHK_RB_CH0; Type-4 tag protocol's ReadBinary command on channel 0
+# 4  NFA_RW_PRES_CHK_RB_CH3; Type-4 tag protocol's ReadBinary command on channel 3
+# 5  NFA_RW_PRES_CHK_ISO_DEP_NAK; presence check command ISO-DEP NAK as per NCI2.0
+PRESENCE_CHECK_ALGORITHM=5
+
+###############################################################################
+# Name of the NCI HAL module to use
+# If unset, falls back to nfc_nci.bcm2079x
+NCI_HAL_MODULE="nfc_nci.st21nfc"
+
+###############################################################################
+# White list to be set at startup.
+DEVICE_HOST_WHITE_LIST={02:C0}
+
+###############################################################################
+# BAIL OUT value for P2P
+# Implements algorithm for NFC-DEP protocol priority over ISO-DEP protocol.
+POLL_BAIL_OUT_MODE=1
+
+###############################################################################
+# Extended APDU length for ISO_DEP
+ISO_DEP_MAX_TRANSCEIVE=0xFEFF
+
+###############################################################################
+# Configure the NFC Extras to open and use a static pipe.  If the value is
+# not set or set to 0, then the default is use a dynamic pipe based on a
+# destination gate (see NFA_HCI_DEFAULT_DEST_GATE).  Note there is a value
+# for each EE (ESE/SIM)
+OFF_HOST_ESE_PIPE_ID=0x5E
+OFF_HOST_SIM_PIPE_ID=0x3E
+
+###############################################################################
+#Set the default Felica T3T System Code OffHost route Location :
+#This settings will be used when application does not set this parameter
+# host  0x00
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_SYS_CODE_ROUTE=0x86
+
+###############################################################################
+#Set the Felica T3T System Code supported power state:
+DEFAULT_SYS_CODE_PWR_STATE=0x3B
+
+###############################################################################
+# Path and Files used for FW update binaries storage
+STNFC_FW_PATH_STORAGE="/vendor/firmware"
+STNFC_FW_BIN_NAME="/st54j_fw.bin"
+STNFC_FW_CONF_NAME="/st54j_conf.bin"
+
+###############################################################################
+# Default off-host route for Felica.
+# This settings will be used when application does not set this parameter
+# host  0x00
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_NFCF_ROUTE=0x86
+
+###############################################################################
+# Configure the default off-host route.
+# used for technology A and B routing
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_OFFHOST_ROUTE=0x81
+
+###############################################################################
+# Configure the default AID route.
+# host  0x00
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_ROUTE=0x00
+
+###############################################################################
+# Configure the NFCEEIDs of offhost UICC.
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+OFFHOST_ROUTE_UICC={81}
+
+###############################################################################
+# Configure the NFCEEIDs of offhost eSEs.
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+OFFHOST_ROUTE_ESE={86}
+
+###############################################################################
+# Configure the list of NFCEE for the ISO-DEP routing.
+# host  0x00
+# eSE   0x82 (eSE),    0x86 (eUICC/SPI-SE)
+# UICC  0x81 (UICC_1), 0x85 (UICC_2)
+DEFAULT_ISODEP_ROUTE=0x81
+
+###############################################################################
+# Core configuration settings
+CORE_CONF_PROP={ 20, 02, 0a, 03,
+        a1, 01, 1e,
+        a2, 01, 19,
+        80, 01, 01
+}
+
+
diff --git a/nfc/libnfc-nci-raven.conf b/nfc/libnfc-nci-raven.conf
new file mode 100644
index 0000000..789c5eb
--- /dev/null
+++ b/nfc/libnfc-nci-raven.conf
@@ -0,0 +1,114 @@
+###############################################################################
+# Application options
+NFC_DEBUG_ENABLED=0
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# Force UICC to only listen to the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
+UICC_LISTEN_TECH_MASK=0x07
+
+###############################################################################
+# AID for Empty Select command
+# If specified, this AID will be substituted when an Empty SELECT command is
+# detected.  The first byte is the length of the AID.  Maximum length is 16.
+AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
+
+###############################################################################
+# When screen is turned off, specify the desired power state of the controller.
+# 0: power-off-sleep state; DEFAULT
+# 1: full-power state
+# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
+SCREEN_OFF_POWER_STATE=1
+
+###############################################################################
+# Force tag polling for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+#            NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+#            NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
+#            NFA_TECHNOLOGY_MASK_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_B             0x02    /* NFC Technology B             */
+# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_ISO15693      0x08    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_KOVIO         0x20    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_ACTIVE        0x40    /* NFC Technology Active        */
+POLLING_TECH_MASK=0x2F
+
+###############################################################################
+# Force P2P to only listen for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
+# NFA_TECHNOLOGY_MASK_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_ACTIVE         0x40    /* NFC Technology Active        */
+P2P_LISTEN_TECH_MASK=0x00
+
+PRESERVE_STORAGE=0x01
+
+###############################################################################
+# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
+# The value is set to 3 by default as it assumes we will discover 0xF2,
+# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
+# so that the stack will not wait any longer than necessary.
+# Maximum EE supported number
+# NXP PN547C2 0x02
+# NXP PN65T 0x03
+# NXP PN548C2 0x02
+# NXP PN66T 0x03
+NFA_MAX_EE_SUPPORTED=0x02
+
+###############################################################################
+# AID_MATCHING constants
+# AID_MATCHING_EXACT_ONLY 0x00
+# AID_MATCHING_EXACT_OR_PREFIX 0x01
+# AID_MATCHING_PREFIX_ONLY 0x02
+# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
+AID_MATCHING_MODE=0x03
+
+###############################################################################
+#Set the default Felica T3T System Code :
+#This settings will be used when application does not set this parameter
+DEFAULT_SYS_CODE={FE:FE}
+
+###############################################################################
+# Value of NIC parameter NFCC_COFNIG_CONTROL
+# 0x00  NFCC is not allowed to manage RF configuration
+# 0x01  NFCC is allowed to manage RF configuration
+NFCC_CONFIG_CONTROL=0x01
+
+###############################################################################
+#Set if the AID routing should be blocked for the power modes not supported.
+NFA_AID_BLOCK_ROUTE=1
+
+###############################################################################
+#Set the OffHost AID supported power state:
+OFFHOST_AID_ROUTE_PWR_STATE=0x3B
+
+###############################################################################
+# Mifare Tag implementation
+# 0: General implementation
+# 1: Legacy implementation
+LEGACY_MIFARE_READER=0
+
+###############################################################################
+# Nfc recovery implementation
+# 0: Crash Nfc Service
+# 1: Toggle Nfc state
+RECOVERY_OPTION=1
+
+###############################################################################
+# NFCEE Power Supply and Communication Link Control Configuration
+# Set when SetAlwaysOn enabled
+# Default 0x00 when SetAlways on disabled
+ALWAYS_ON_SET_EE_POWER_AND_LINK_CONF=0x03
diff --git a/nfc/libnfc-nci.conf b/nfc/libnfc-nci.conf
new file mode 100644
index 0000000..c475161
--- /dev/null
+++ b/nfc/libnfc-nci.conf
@@ -0,0 +1,108 @@
+###############################################################################
+# Application options
+NFC_DEBUG_ENABLED=0
+
+###############################################################################
+# File used for NFA storage
+NFA_STORAGE="/data/nfc"
+
+###############################################################################
+# Force UICC to only listen to the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F
+UICC_LISTEN_TECH_MASK=0x07
+
+###############################################################################
+# AID for Empty Select command
+# If specified, this AID will be substituted when an Empty SELECT command is
+# detected.  The first byte is the length of the AID.  Maximum length is 16.
+AID_FOR_EMPTY_SELECT={08:A0:00:00:01:51:00:00:00}
+
+###############################################################################
+# When screen is turned off, specify the desired power state of the controller.
+# 0: power-off-sleep state; DEFAULT
+# 1: full-power state
+# 2: screen-off card-emulation (CE4/CE3/CE1 modes are used)
+SCREEN_OFF_POWER_STATE=1
+
+###############################################################################
+# Force tag polling for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B |
+#            NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 |
+#            NFA_TECHNOLOGY_MASK_B_PRIME | NFA_TECHNOLOGY_MASK_KOVIO |
+#            NFA_TECHNOLOGY_MASK_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_B             0x02    /* NFC Technology B             */
+# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_ISO15693      0x08    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_KOVIO         0x20    /* Proprietary Technology       */
+# NFA_TECHNOLOGY_MASK_ACTIVE        0x40    /* NFC Technology Active        */
+POLLING_TECH_MASK=0x2F
+
+###############################################################################
+# Force P2P to only listen for the following technology(s).
+# The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h.
+# Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_F |
+# NFA_TECHNOLOGY_MASK_ACTIVE
+#
+# Notable bits:
+# NFA_TECHNOLOGY_MASK_A             0x01    /* NFC Technology A             */
+# NFA_TECHNOLOGY_MASK_F             0x04    /* NFC Technology F             */
+# NFA_TECHNOLOGY_MASK_ACTIVE         0x40    /* NFC Technology Active        */
+P2P_LISTEN_TECH_MASK=0x00
+
+PRESERVE_STORAGE=0x01
+
+###############################################################################
+# Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h.
+# The value is set to 3 by default as it assumes we will discover 0xF2,
+# 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced
+# so that the stack will not wait any longer than necessary.
+# Maximum EE supported number
+# NXP PN547C2 0x02
+# NXP PN65T 0x03
+# NXP PN548C2 0x02
+# NXP PN66T 0x03
+NFA_MAX_EE_SUPPORTED=0x02
+
+###############################################################################
+# AID_MATCHING constants
+# AID_MATCHING_EXACT_ONLY 0x00
+# AID_MATCHING_EXACT_OR_PREFIX 0x01
+# AID_MATCHING_PREFIX_ONLY 0x02
+# AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03
+AID_MATCHING_MODE=0x03
+
+###############################################################################
+#Set the default Felica T3T System Code :
+#This settings will be used when application does not set this parameter
+DEFAULT_SYS_CODE={FE:FE}
+
+###############################################################################
+# Value of NIC parameter NFCC_COFNIG_CONTROL
+# 0x00  NFCC is not allowed to manage RF configuration
+# 0x01  NFCC is allowed to manage RF configuration
+NFCC_CONFIG_CONTROL=0x01
+
+###############################################################################
+#Set if the AID routing should be blocked for the power modes not supported.
+NFA_AID_BLOCK_ROUTE=1
+
+###############################################################################
+#Set the OffHost AID supported power state:
+OFFHOST_AID_ROUTE_PWR_STATE=0x3B
+
+###############################################################################
+# Mifare Tag implementation
+# 0: General implementation
+# 1: Legacy implementation
+LEGACY_MIFARE_READER=0
+
+###############################################################################
+# Nfc recovery implementation
+# 0: Crash Nfc Service
+# 1: Toggle Nfc state
+RECOVERY_OPTION=1
diff --git a/oriole/overlay/packages/apps/Nfc/res/values/config.xml b/oriole/overlay/packages/apps/Nfc/res/values/config.xml
new file mode 100644
index 0000000..a18aea8
--- /dev/null
+++ b/oriole/overlay/packages/apps/Nfc/res/values/config.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2021 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources>
+  <bool name="nfcc_always_on_allowed">false</bool>
+</resources>
diff --git a/raven/overlay/packages/apps/Nfc/res/values/config.xml b/raven/overlay/packages/apps/Nfc/res/values/config.xml
new file mode 100644
index 0000000..cd2fc8c
--- /dev/null
+++ b/raven/overlay/packages/apps/Nfc/res/values/config.xml
@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2021 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+<resources>
+  <bool name="nfcc_always_on_allowed">true</bool>
+</resources>
diff --git a/thermal_info_config_oriole.json b/thermal_info_config_oriole.json
index b6e096b..afa79f0 100644
--- a/thermal_info_config_oriole.json
+++ b/thermal_info_config_oriole.json
@@ -300,16 +300,16 @@
             "Type":"UNKNOWN",
             "VirtualSensor":true,
             "Formula":"COUNT_THRESHOLD",
-            "TriggerSensor": "smpl_gm",
+            "TriggerSensor": "vdroop1",
             "Combination":[
                 "battery",
                 "battery_cycle",
-                "smpl_gm"
+                "vdroop1"
             ],
             "Coefficient":[
                 "-10000",
                 "400",
-                "1400"
+                "1200"
             ],
             "HotThreshold":[
                 "NAN",
@@ -342,6 +342,38 @@
             "Monitor":false
         },
         {
+            "Name":"vdroop1",
+            "Type":"BCL_VOLTAGE",
+            "HotThreshold":[
+                "NAN",
+                "NAN",
+                "NAN",
+                "NAN",
+                1200,
+                "NAN",
+                "NAN"
+            ],
+            "VrThreshold":"NAN",
+            "Multiplier":1,
+            "Monitor":true
+        },
+        {
+            "Name":"vdroop2",
+            "Type":"BCL_VOLTAGE",
+            "HotThreshold":[
+                "NAN",
+                "NAN",
+                "NAN",
+                "NAN",
+                1200,
+                "NAN",
+                "NAN"
+            ],
+            "VrThreshold":"NAN",
+            "Multiplier":1,
+            "Monitor":true
+        },
+        {
             "Name":"smpl_gm",
             "Type":"BCL_VOLTAGE",
             "HotThreshold":[
diff --git a/thermal_info_config_raven.json b/thermal_info_config_raven.json
index 55a19ee..872b284 100644
--- a/thermal_info_config_raven.json
+++ b/thermal_info_config_raven.json
@@ -300,16 +300,16 @@
             "Type":"UNKNOWN",
             "VirtualSensor":true,
             "Formula":"COUNT_THRESHOLD",
-            "TriggerSensor": "smpl_gm",
+            "TriggerSensor": "vdroop1",
             "Combination":[
                 "battery",
                 "battery_cycle",
-                "smpl_gm"
+                "vdroop1"
             ],
             "Coefficient":[
                 "-10000",
                 "400",
-                "1400"
+                "1200"
             ],
             "HotThreshold":[
                 "NAN",
@@ -342,6 +342,38 @@
             "Monitor":false
         },
         {
+            "Name":"vdroop1",
+            "Type":"BCL_VOLTAGE",
+            "HotThreshold":[
+                "NAN",
+                "NAN",
+                "NAN",
+                "NAN",
+                1200,
+                "NAN",
+                "NAN"
+            ],
+            "VrThreshold":"NAN",
+            "Multiplier":1,
+            "Monitor":true
+        },
+        {
+            "Name":"vdroop2",
+            "Type":"BCL_VOLTAGE",
+            "HotThreshold":[
+                "NAN",
+                "NAN",
+                "NAN",
+                "NAN",
+                1200,
+                "NAN",
+                "NAN"
+            ],
+            "VrThreshold":"NAN",
+            "Multiplier":1,
+            "Monitor":true
+        },
+        {
             "Name":"smpl_gm",
             "Type":"BCL_VOLTAGE",
             "HotThreshold":[
diff --git a/thermal_info_config_slider.json b/thermal_info_config_slider.json
index b4c90a0..02201e6 100644
--- a/thermal_info_config_slider.json
+++ b/thermal_info_config_slider.json
@@ -107,16 +107,16 @@
             "Type":"UNKNOWN",
             "VirtualSensor":true,
             "Formula":"COUNT_THRESHOLD",
-            "TriggerSensor": "smpl_gm",
+            "TriggerSensor": "vdroop1",
             "Combination":[
                 "battery",
                 "battery_cycle",
-                "smpl_gm"
+                "vdroop1"
             ],
             "Coefficient":[
                 "-10000",
                 "400",
-                "1400"
+                "1200"
             ],
             "HotThreshold":[
                 "NAN",
@@ -149,6 +149,38 @@
             "Monitor":false
         },
         {
+            "Name":"vdroop1",
+            "Type":"BCL_VOLTAGE",
+            "HotThreshold":[
+                "NAN",
+                "NAN",
+                "NAN",
+                "NAN",
+                1200,
+                "NAN",
+                "NAN"
+            ],
+            "VrThreshold":"NAN",
+            "Multiplier":1,
+            "Monitor":true
+        },
+        {
+            "Name":"vdroop2",
+            "Type":"BCL_VOLTAGE",
+            "HotThreshold":[
+                "NAN",
+                "NAN",
+                "NAN",
+                "NAN",
+                1200,
+                "NAN",
+                "NAN"
+            ],
+            "VrThreshold":"NAN",
+            "Multiplier":1,
+            "Monitor":true
+        },
+        {
             "Name":"smpl_gm",
             "Type":"BCL_VOLTAGE",
             "HotThreshold":[
diff --git a/thermal_info_config_whitefin.json b/thermal_info_config_whitefin.json
index b4c90a0..02201e6 100644
--- a/thermal_info_config_whitefin.json
+++ b/thermal_info_config_whitefin.json
@@ -107,16 +107,16 @@
             "Type":"UNKNOWN",
             "VirtualSensor":true,
             "Formula":"COUNT_THRESHOLD",
-            "TriggerSensor": "smpl_gm",
+            "TriggerSensor": "vdroop1",
             "Combination":[
                 "battery",
                 "battery_cycle",
-                "smpl_gm"
+                "vdroop1"
             ],
             "Coefficient":[
                 "-10000",
                 "400",
-                "1400"
+                "1200"
             ],
             "HotThreshold":[
                 "NAN",
@@ -149,6 +149,38 @@
             "Monitor":false
         },
         {
+            "Name":"vdroop1",
+            "Type":"BCL_VOLTAGE",
+            "HotThreshold":[
+                "NAN",
+                "NAN",
+                "NAN",
+                "NAN",
+                1200,
+                "NAN",
+                "NAN"
+            ],
+            "VrThreshold":"NAN",
+            "Multiplier":1,
+            "Monitor":true
+        },
+        {
+            "Name":"vdroop2",
+            "Type":"BCL_VOLTAGE",
+            "HotThreshold":[
+                "NAN",
+                "NAN",
+                "NAN",
+                "NAN",
+                1200,
+                "NAN",
+                "NAN"
+            ],
+            "VrThreshold":"NAN",
+            "Multiplier":1,
+            "Monitor":true
+        },
+        {
             "Name":"smpl_gm",
             "Type":"BCL_VOLTAGE",
             "HotThreshold":[