ro.vendor.smartcharging=1
ro.vendor.disableaicharging=1

####################################
#
# system.prop for qssi
#
#rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=RUIM,RUIM
DEVICE_PROVISIONED=1
# Set network mode to (NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA, NR_LTE_TDSCDMA_CDMA_EVDO_GSM_WCDMA) for 8+8 mode device on DSDS mode
#ro.telephony.default_network=33,33
dalvik.vm.heapsize=36m
dalvik.vm.dex2oat64.enabled=true
dev.pm.dyn_samplingrate=1
#ro.hdmi.enable=true
#persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.vendor.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
media.stagefright.thumbnail.prefer_hw_codecs=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
media.settings.xml=/vendor/etc/media_profiles_vendor.xml
#16777215 is decimal sum of supported codecs in AAL
#codecs:(PARSER_)AAC AC3 AMR_NB AMR_WB ASF AVI DTS FLV 3GP 3G2 MKV MP2PS MP2TS MP3 OGG QCP WAV FLAC AIFF APE DSD MOV MHAS
#FIH disable MHAS for CTS test
#vendor.mm.enable.qcom_parser=12582655
vendor.mm.enable.qcom_parser=4194047
persist.mm.enable.prefetch=true
#Netflix custom property
ro.netflix.bsp_rev=Q8250-19134-1
ro.audio.monitorRotation=true
#
# system props for the data modules
#
ro.vendor.use_data_netmgrd=true
persist.vendor.data.mode=concurrent
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
# 196609 is decimal for 0x30001 to report version 3.1
# 196610 is decimal for 0x30002 to report version 3.2
ro.opengles.version=196610
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#System props for BT
#ro.bluetooth.library_name=libbluetooth_qti.so
persist.vendor.btstack.aac_frm_ctl.enabled=true
#[SWAS6]_BT_Porting_start
persist.vendor.service.bt.iotinfo.report.enable=true
persist.vendor.btstack.enable.twsplus=true
persist.vendor.btstack.enable.twsplussho=true
persist.bluetooth.avrcpversion=avrcp16
#[SWAS6]_BT_Porting_end
#system prop for RmNet Data
persist.rmnet.data.enable=true
persist.data.wda.enable=true
persist.data.df.dl_mode=5
persist.data.df.ul_mode=5
persist.data.df.agg.dl_pkt=10
persist.data.df.agg.dl_size=4096
persist.data.df.mux_count=8
persist.data.df.iwlan_mux=9
persist.data.df.dev_name=rmnet_usb0
#property to enable user to access Google WFD settings
persist.debug.wfd.enable=1
##property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#property to enable HWC for VDS
debug.sf.enable_hwc_vds=1
# enable tunnel encoding for amrwb
tunnel.audio.encode=true
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
# system prop for NFC DT
ro.nfc.port=I2C
#initialize QCA1530 detection
sys.qca1530=detect
#Enable stm events
persist.debug.coresight.config=stm-events
#Bringup properties
persist.sys.force_sw_gles=1
persist.vendor.radio.atfwd.start=true
ro.kernel.qemu.gles=0
qemu.hw.mainkeys=0
#Expose aux camera for below packages
#vendor.camera.aux.packagelist=org.codeaurora.snapcam
#Add snapcam in privapp list
#persist.vendor.camera.privapp.list=org.codeaurora.snapcam
#enable IZat OptInApp overlay
persist.vendor.overlay.izat.optin=rro
# Property for backup NTP Server
persist.backup.ntpServer="0.pool.ntp.org"
#Property to enable Mag filter
persist.vendor.sensors.enable.mag_filter=true
#Partition source order for Product/Build properties pickup.
#ro.product.property_source_order=odm,vendor,product,system_ext,system
#Property to enable Codec2 for audio and OMX for Video
debug.stagefright.ccodec=1
#Property to set native recorder's maximum base layer fps
ro.media.recorder-max-base-layer-fps=60
#Property to enable logcat service
ro.logd.kernel=1
#persist.vendor.asus.logcat.filenum=20
persist.logd.size=1048576
#ro.vendor.asus.logcat=1
# Property for default log flag
#persist.vendor.asus.startlog=0
persist.vendor.sys.downloadmode.enable=0
# [ASUS BSP] for Poweroff Alarm Support
# remove this becuase ASUS inform design change to PM feature: asus.software.poweroffalarm_support
# ro.vendor.asus.poweroffalarm_support=1
#Disable MTE Async for system server
arm64.memtag.process.system_server=off
ro.soc.manufacturer=QTI
ro.soc.model=SM8250
####################################
# from vendor/ims/data/twinapps/twinapps.prop
####################################
#
# system.prop for TwinApps
#
#ASUS IMS Carol_Hu: https://android-review.googlesource.com/c/platform/build/+/1417451
external_storage.cross_user.enabled=1

ro.vendor.qti.va_aosp.support=1

# Common Add-on
sys.vendor.qti.servicetracker.disable=true

####################################
# from variable PRODUCT_SYSTEM_DEFAULT_PROPERTIES
####################################
ro.config.vc_call_vol_default=3
ro.config.media_vol_default=15
ro.config.media_vol_steps=30