diff --git a/tests/sbom_test.sh b/tests/sbom_test.sh
new file mode 100755
index 0000000..28ce9d8
--- /dev/null
+++ b/tests/sbom_test.sh
@@ -0,0 +1,202 @@
+#!/bin/bash
+
+# Copyright (C) 2023 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+set -uo pipefail
+
+# Integration test for verifying generated SBOM for cuttlefish device.
+
+if [ ! -e "build/make/core/Makefile" ]; then
+  echo "$0 must be run from the top of the Android source tree."
+  exit 1
+fi
+
+tmp_dir="$(mktemp -d tmp.XXXXXX)"
+function cleanup {
+  rm -rf "${tmp_dir}"
+}
+trap cleanup EXIT
+
+out_dir=$tmp_dir
+droid_target=droid
+
+debug=false
+if [ $debug = "true" ]; then
+  out_dir=out
+  droid_target=
+fi
+# m droid
+TARGET_PRODUCT="aosp_cf_x86_64_phone" TARGET_BUILD_VARIANT=userdebug OUT_DIR=$out_dir \
+  build/soong/soong_ui.bash --make-mode $droid_target dump.erofs sbom
+
+# Generate installed file list from .img files in PRODUCT_OUT
+dump_erofs=$out_dir/host/linux-x86/bin/dump.erofs
+product_out=$out_dir/target/product/vsoc_x86_64
+
+declare -A diff_excludes
+diff_excludes[odm]="-I /odm/lib/modules"
+diff_excludes[vendor]=\
+"-I /vendor/lib64/libkeystore2_crypto.so \
+ -I /vendor/lib/modules \
+ -I /vendor/odm"
+diff_excludes[system]=\
+"-I /acct/ \
+ -I /adb_keys \
+ -I /apex/ \
+ -I /bin \
+ -I /bugreports \
+ -I /cache \
+ -I /config/ \
+ -I /d \
+ -I /data/ \
+ -I /data_mirror/ \
+ -I /debug_ramdisk/ \
+ -I /dev/ \
+ -I /etc \
+ -I /init \
+ -I /init.environ.rc \
+ -I /linkerconfig/ \
+ -I /metadata/ \
+ -I /mnt/ \
+ -I /odm/app \
+ -I /odm/bin \
+ -I /odm_dlkm/etc \
+ -I /odm/etc \
+ -I /odm/firmware \
+ -I /odm/framework \
+ -I /odm/lib \
+ -I /odm/lib64 \
+ -I /odm/overlay \
+ -I /odm/priv-app \
+ -I /odm/usr \
+ -I /oem/ \
+ -I /postinstall/ \
+ -I /proc/ \
+ -I /product/ \
+ -I /sdcard \
+ -I /second_stage_resources/ \
+ -I /storage/ \
+ -I /sys/ \
+ -I /system_dlkm/ \
+ -I /system_ext/ \
+ -I /system/lib64/android.hardware.confirmationui@1.0.so \
+ -I /system/lib64/android.hardware.confirmationui-V1-ndk.so \
+ -I /system/lib64/android.hardware.keymaster@4.1.so \
+ -I /system/lib64/android.hardware.security.rkp-V3-ndk.so \
+ -I /system/lib64/android.hardware.security.sharedsecret-V1-ndk.so \
+ -I /system/lib64/android.security.compat-ndk.so \
+ -I /system/lib64/libkeymaster4_1support.so \
+ -I /system/lib64/libkeymint.so \
+ -I /system/lib64/libkeystore2_aaid.so \
+ -I /system/lib64/libkeystore2_apc_compat.so \
+ -I /system/lib64/libkeystore2_crypto.so \
+ -I /system/lib64/libkm_compat_service.so \
+ -I /system/lib64/libkm_compat.so \
+ -I /system/lib64/vndk-29 \
+ -I /system/lib64/vndk-sp-29 \
+ -I /system/lib/modules \
+ -I /system/lib/vndk-29 \
+ -I /system/lib/vndk-sp-29 \
+ -I /system/product \
+ -I /system/system_ext \
+ -I /system/usr/icu \
+ -I /system/vendor \
+ -I /vendor/ \
+ -I /vendor_dlkm/etc"
+
+# Example output of dump.erofs is as below, and the data used in the test start
+# at line 11. Column 1 is inode id, column 2 is inode type and column 3 is name.
+# Each line is captured in variable "entry", sed is used to trim the leading
+# spaces and cut is used to get field 1 every time. Once a field is extracted,
+# "cut --complement" is used to remove the extracted field so next field can be
+# processed in the same way and to be processed field is always field 1.
+# Output of dump.erofs:
+#     File : /
+#     Size: 160  On-disk size: 160  directory
+#     NID: 39   Links: 10   Layout: 2   Compression ratio: 100.00%
+#     Inode size: 64   Extent size: 0   Xattr size: 16
+#     Uid: 0   Gid: 0  Access: 0755/rwxr-xr-x
+#     Timestamp: 2023-02-14 01:15:54.000000000
+#
+#            NID TYPE  FILENAME
+#             39    2  .
+#             39    2  ..
+#             47    2  app
+#        1286748    2  bin
+#        1286754    2  etc
+#        5304814    2  lib
+#        5309056    2  lib64
+#        5309130    2  media
+#        5388910    2  overlay
+#        5479537    2  priv-app
+EROFS_IMAGES="\
+  $product_out/product.img \
+  $product_out/system.img \
+  $product_out/system_ext.img \
+  $product_out/system_dlkm.img \
+  $product_out/system_other.img \
+  $product_out/odm.img \
+  $product_out/odm_dlkm.img \
+  $product_out/vendor.img \
+  $product_out/vendor_dlkm.img"
+for f in $EROFS_IMAGES; do
+  partition_name=$(basename $f | cut -d. -f1)
+  file_list_file="${product_out}/sbom-${partition_name}-files.txt"
+  files_in_spdx_file="${product_out}/sbom-${partition_name}-files-in-spdx.txt"
+  rm "$file_list_file" > /dev/null 2>&1
+  all_dirs="/"
+  while [ ! -z "$all_dirs" ]; do
+    dir=$(echo "$all_dirs" | cut -d ' ' -f1)
+    all_dirs=$(echo "$all_dirs" | cut -d ' ' -f1 --complement -s)
+    entries=$($dump_erofs --ls --path "$dir" $f | tail -n +11)
+    while read -r entry; do
+      nid=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1)
+      entry=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1 --complement)
+      type=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1)
+      entry=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1 --complement)
+      name=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1)
+      case $type in
+        "2")  # directory
+          all_dirs=$(echo "$all_dirs $dir/$name" | sed 's/^\s*//')
+          ;;
+        *)
+          (
+          if [ "$partition_name" != "system" ]; then
+            # system partition is mounted to /, not to prepend partition name.
+            printf %s "/$partition_name"
+          fi
+          echo "$dir/$name" | sed 's#^//#/#'
+          ) >> "$file_list_file"
+          ;;
+      esac
+    done <<< "$entries"
+  done
+  sort -n -o "$file_list_file" "$file_list_file"
+
+  # Diff
+  echo ============ Diffing files in $f and SBOM
+  grep "FileName: /${partition_name}/" $product_out/sbom.spdx | sed 's/^FileName: //' | sort -n > "$files_in_spdx_file"
+  exclude=
+  if [ -v 'diff_excludes[$partition_name]' ]; then
+    exclude=${diff_excludes[$partition_name]}
+  fi
+  diff "$file_list_file" "$files_in_spdx_file" $exclude
+  if [ $? != "0" ]; then
+    echo Found diffs in $f and SBOM.
+    exit 1
+  else
+    echo No diffs.
+  fi
+done
\ No newline at end of file