diff --git a/android/module.go b/android/module.go
index 0bd64ed..2bcc7a8 100644
--- a/android/module.go
+++ b/android/module.go
@@ -2732,6 +2732,7 @@
 // Modules can implement HostToolProvider and return a valid OptionalPath from HostToolPath() to
 // specify that they can be used as a tool by a genrule module.
 type HostToolProvider interface {
+	Module
 	// HostToolPath returns the path to the host tool for the module if it is one, or an invalid
 	// OptionalPath.
 	HostToolPath() OptionalPath
diff --git a/android/rule_builder.go b/android/rule_builder.go
index e2d8187..84501fe 100644
--- a/android/rule_builder.go
+++ b/android/rule_builder.go
@@ -32,6 +32,7 @@
 
 const sboxSandboxBaseDir = "__SBOX_SANDBOX_DIR__"
 const sboxOutSubDir = "out"
+const sboxToolsSubDir = "tools"
 const sboxOutDir = sboxSandboxBaseDir + "/" + sboxOutSubDir
 
 // RuleBuilder provides an alternative to ModuleContext.Rule and ModuleContext.Build to add a command line to the build
@@ -48,6 +49,7 @@
 	highmem          bool
 	remoteable       RemoteRuleSupports
 	outDir           WritablePath
+	sboxTools        bool
 	sboxManifestPath WritablePath
 	missingDeps      []string
 }
@@ -140,6 +142,19 @@
 	return r
 }
 
+// SandboxTools enables tool sandboxing for the rule by copying any referenced tools into the
+// sandbox.
+func (r *RuleBuilder) SandboxTools() *RuleBuilder {
+	if !r.sbox {
+		panic("SandboxTools() must be called after Sbox()")
+	}
+	if len(r.commands) > 0 {
+		panic("SandboxTools() may not be called after Command()")
+	}
+	r.sboxTools = true
+	return r
+}
+
 // Install associates an output of the rule with an install location, which can be retrieved later using
 // RuleBuilder.Installs.
 func (r *RuleBuilder) Install(from Path, to string) {
@@ -468,8 +483,29 @@
 			manifest.OutputDepfile = proto.String(depFile.String())
 		}
 
+		// If sandboxing tools is enabled, add copy rules to the manifest to copy each tool
+		// into the sbox directory.
+		if r.sboxTools {
+			for _, tool := range tools {
+				command.CopyBefore = append(command.CopyBefore, &sbox_proto.Copy{
+					From: proto.String(tool.String()),
+					To:   proto.String(sboxPathForToolRel(r.ctx, tool)),
+				})
+			}
+			for _, c := range r.commands {
+				for _, tool := range c.packagedTools {
+					command.CopyBefore = append(command.CopyBefore, &sbox_proto.Copy{
+						From:       proto.String(tool.srcPath.String()),
+						To:         proto.String(sboxPathForPackagedToolRel(tool)),
+						Executable: proto.Bool(tool.executable),
+					})
+					tools = append(tools, tool.srcPath)
+				}
+			}
+		}
+
 		// Add copy rules to the manifest to copy each output file from the sbox directory.
-		// to the output directory.
+		// to the output directory after running the commands.
 		sboxOutputs := make([]string, len(outputs))
 		for i, output := range outputs {
 			rel := Rel(r.ctx, r.outDir.String(), output.String())
@@ -582,6 +618,7 @@
 	symlinkOutputs WritablePaths
 	depFiles       WritablePaths
 	tools          Paths
+	packagedTools  []PackagingSpec
 	rspFileInputs  Paths
 
 	// spans [start,end) of the command that should not be ninja escaped
@@ -625,6 +662,79 @@
 	return path.String()
 }
 
+// SboxPathForTool takes a path to a tool, which may be an output file or a source file, and returns
+// the corresponding path for the tool in the sbox sandbox.  It assumes that sandboxing and tool
+// sandboxing are enabled.
+func SboxPathForTool(ctx BuilderContext, path Path) string {
+	return filepath.Join(sboxSandboxBaseDir, sboxPathForToolRel(ctx, path))
+}
+
+func sboxPathForToolRel(ctx BuilderContext, path Path) string {
+	// Errors will be handled in RuleBuilder.Build where we have a context to report them
+	relOut, isRelOut, _ := maybeRelErr(PathForOutput(ctx, "host", ctx.Config().PrebuiltOS()).String(), path.String())
+	if isRelOut {
+		// The tool is in the output directory, it will be copied to __SBOX_OUT_DIR__/tools/out
+		return filepath.Join(sboxToolsSubDir, "out", relOut)
+	}
+	// The tool is in the source directory, it will be copied to __SBOX_OUT_DIR__/tools/src
+	return filepath.Join(sboxToolsSubDir, "src", path.String())
+}
+
+// SboxPathForPackagedTool takes a PackageSpec for a tool and returns the corresponding path for the
+// tool after copying it into the sandbox.  This can be used  on the RuleBuilder command line to
+// reference the tool.
+func SboxPathForPackagedTool(spec PackagingSpec) string {
+	return filepath.Join(sboxSandboxBaseDir, sboxPathForPackagedToolRel(spec))
+}
+
+func sboxPathForPackagedToolRel(spec PackagingSpec) string {
+	return filepath.Join(sboxToolsSubDir, "out", spec.relPathInPackage)
+}
+
+// PathForTool takes a path to a tool, which may be an output file or a source file, and returns
+// the corresponding path for the tool in the sbox sandbox if sbox is enabled, or the original path
+// if it is not.  This can be used  on the RuleBuilder command line to reference the tool.
+func (c *RuleBuilderCommand) PathForTool(path Path) string {
+	if c.rule.sbox && c.rule.sboxTools {
+		return filepath.Join(sboxSandboxBaseDir, sboxPathForToolRel(c.rule.ctx, path))
+	}
+	return path.String()
+}
+
+// PackagedTool adds the specified tool path to the command line.  It can only be used with tool
+// sandboxing enabled by SandboxTools(), and will copy the tool into the sandbox.
+func (c *RuleBuilderCommand) PackagedTool(spec PackagingSpec) *RuleBuilderCommand {
+	if !c.rule.sboxTools {
+		panic("PackagedTool() requires SandboxTools()")
+	}
+
+	c.packagedTools = append(c.packagedTools, spec)
+	c.Text(sboxPathForPackagedToolRel(spec))
+	return c
+}
+
+// ImplicitPackagedTool copies the specified tool into the sandbox without modifying the command
+// line.  It can only be used with tool sandboxing enabled by SandboxTools().
+func (c *RuleBuilderCommand) ImplicitPackagedTool(spec PackagingSpec) *RuleBuilderCommand {
+	if !c.rule.sboxTools {
+		panic("ImplicitPackagedTool() requires SandboxTools()")
+	}
+
+	c.packagedTools = append(c.packagedTools, spec)
+	return c
+}
+
+// ImplicitPackagedTools copies the specified tools into the sandbox without modifying the command
+// line.  It can only be used with tool sandboxing enabled by SandboxTools().
+func (c *RuleBuilderCommand) ImplicitPackagedTools(specs []PackagingSpec) *RuleBuilderCommand {
+	if !c.rule.sboxTools {
+		panic("ImplicitPackagedTools() requires SandboxTools()")
+	}
+
+	c.packagedTools = append(c.packagedTools, specs...)
+	return c
+}
+
 // Text adds the specified raw text to the command line.  The text should not contain input or output paths or the
 // rule will not have them listed in its dependencies or outputs.
 func (c *RuleBuilderCommand) Text(text string) *RuleBuilderCommand {
@@ -693,7 +803,19 @@
 // RuleBuilder.Tools.
 func (c *RuleBuilderCommand) Tool(path Path) *RuleBuilderCommand {
 	c.tools = append(c.tools, path)
-	return c.Text(path.String())
+	return c.Text(c.PathForTool(path))
+}
+
+// Tool adds the specified tool path to the dependencies returned by RuleBuilder.Tools.
+func (c *RuleBuilderCommand) ImplicitTool(path Path) *RuleBuilderCommand {
+	c.tools = append(c.tools, path)
+	return c
+}
+
+// Tool adds the specified tool path to the dependencies returned by RuleBuilder.Tools.
+func (c *RuleBuilderCommand) ImplicitTools(paths Paths) *RuleBuilderCommand {
+	c.tools = append(c.tools, paths...)
+	return c
 }
 
 // BuiltTool adds the specified tool path that was built using a host Soong module to the command line.  The path will
diff --git a/android/rule_builder_test.go b/android/rule_builder_test.go
index e676e4a..06ea124 100644
--- a/android/rule_builder_test.go
+++ b/android/rule_builder_test.go
@@ -436,6 +436,44 @@
 			t.Errorf("\nwant rule.depFileMergerCmd() = %#v\n                   got %#v", w, g)
 		}
 	})
+
+	t.Run("sbox tools", func(t *testing.T) {
+		rule := NewRuleBuilder(pctx, ctx).Sbox(PathForOutput(ctx, ""),
+			PathForOutput(ctx, "sbox.textproto")).SandboxTools()
+		addCommands(rule)
+
+		wantCommands := []string{
+			"__SBOX_SANDBOX_DIR__/out/DepFile Flag FlagWithArg=arg FlagWithDepFile=__SBOX_SANDBOX_DIR__/out/depfile FlagWithInput=input FlagWithOutput=__SBOX_SANDBOX_DIR__/out/output Input __SBOX_SANDBOX_DIR__/out/Output __SBOX_SANDBOX_DIR__/out/SymlinkOutput Text __SBOX_SANDBOX_DIR__/tools/src/Tool after command2 old cmd",
+			"command2 __SBOX_SANDBOX_DIR__/out/depfile2 input2 __SBOX_SANDBOX_DIR__/out/output2 __SBOX_SANDBOX_DIR__/tools/src/tool2",
+			"command3 input3 __SBOX_SANDBOX_DIR__/out/output2 __SBOX_SANDBOX_DIR__/out/output3",
+		}
+
+		wantDepMergerCommand := "__SBOX_SANDBOX_DIR__/tools/out/bin/dep_fixer __SBOX_SANDBOX_DIR__/out/DepFile __SBOX_SANDBOX_DIR__/out/depfile __SBOX_SANDBOX_DIR__/out/ImplicitDepFile __SBOX_SANDBOX_DIR__/out/depfile2"
+
+		if g, w := rule.Commands(), wantCommands; !reflect.DeepEqual(g, w) {
+			t.Errorf("\nwant rule.Commands() = %#v\n                   got %#v", w, g)
+		}
+
+		if g, w := rule.Inputs(), wantInputs; !reflect.DeepEqual(w, g) {
+			t.Errorf("\nwant rule.Inputs() = %#v\n                 got %#v", w, g)
+		}
+		if g, w := rule.Outputs(), wantOutputs; !reflect.DeepEqual(w, g) {
+			t.Errorf("\nwant rule.Outputs() = %#v\n                  got %#v", w, g)
+		}
+		if g, w := rule.DepFiles(), wantDepFiles; !reflect.DeepEqual(w, g) {
+			t.Errorf("\nwant rule.DepFiles() = %#v\n                  got %#v", w, g)
+		}
+		if g, w := rule.Tools(), wantTools; !reflect.DeepEqual(w, g) {
+			t.Errorf("\nwant rule.Tools() = %#v\n                got %#v", w, g)
+		}
+		if g, w := rule.OrderOnlys(), wantOrderOnlys; !reflect.DeepEqual(w, g) {
+			t.Errorf("\nwant rule.OrderOnlys() = %#v\n                got %#v", w, g)
+		}
+
+		if g, w := rule.depFileMergerCmd(rule.DepFiles()).String(), wantDepMergerCommand; g != w {
+			t.Errorf("\nwant rule.depFileMergerCmd() = %#v\n                   got %#v", w, g)
+		}
+	})
 }
 
 func testRuleBuilderFactory() Module {
diff --git a/genrule/genrule.go b/genrule/genrule.go
index 93938c9..78af97c 100644
--- a/genrule/genrule.go
+++ b/genrule/genrule.go
@@ -139,7 +139,6 @@
 	// number of shards the input files are sharded into.
 	taskGenerator taskFunc
 
-	deps        android.Paths
 	rule        blueprint.Rule
 	rawCommands []string
 
@@ -244,6 +243,8 @@
 		}
 	}
 
+	var tools android.Paths
+	var packagedTools []android.PackagingSpec
 	if len(g.properties.Tools) > 0 {
 		seenTools := make(map[string]bool)
 
@@ -251,37 +252,52 @@
 			switch tag := ctx.OtherModuleDependencyTag(module).(type) {
 			case hostToolDependencyTag:
 				tool := ctx.OtherModuleName(module)
-				var path android.OptionalPath
 
-				if t, ok := module.(android.HostToolProvider); ok {
+				switch t := module.(type) {
+				case android.HostToolProvider:
+					// A HostToolProvider provides the path to a tool, which will be copied
+					// into the sandbox.
 					if !t.(android.Module).Enabled() {
 						if ctx.Config().AllowMissingDependencies() {
 							ctx.AddMissingDependencies([]string{tool})
 						} else {
 							ctx.ModuleErrorf("depends on disabled module %q", tool)
 						}
-						break
+						return
 					}
-					path = t.HostToolPath()
-				} else if t, ok := module.(bootstrap.GoBinaryTool); ok {
+					path := t.HostToolPath()
+					if !path.Valid() {
+						ctx.ModuleErrorf("host tool %q missing output file", tool)
+						return
+					}
+					if specs := t.TransitivePackagingSpecs(); specs != nil {
+						// If the HostToolProvider has PackgingSpecs, which are definitions of the
+						// required relative locations of the tool and its dependencies, use those
+						// instead.  They will be copied to those relative locations in the sbox
+						// sandbox.
+						packagedTools = append(packagedTools, specs...)
+						// Assume that the first PackagingSpec of the module is the tool.
+						addLocationLabel(tag.label, []string{android.SboxPathForPackagedTool(specs[0])})
+					} else {
+						tools = append(tools, path.Path())
+						addLocationLabel(tag.label, []string{android.SboxPathForTool(ctx, path.Path())})
+					}
+				case bootstrap.GoBinaryTool:
+					// A GoBinaryTool provides the install path to a tool, which will be copied.
 					if s, err := filepath.Rel(android.PathForOutput(ctx).String(), t.InstallPath()); err == nil {
-						path = android.OptionalPathForPath(android.PathForOutput(ctx, s))
+						toolPath := android.PathForOutput(ctx, s)
+						tools = append(tools, toolPath)
+						addLocationLabel(tag.label, []string{android.SboxPathForTool(ctx, toolPath)})
 					} else {
 						ctx.ModuleErrorf("cannot find path for %q: %v", tool, err)
-						break
+						return
 					}
-				} else {
+				default:
 					ctx.ModuleErrorf("%q is not a host tool provider", tool)
-					break
+					return
 				}
 
-				if path.Valid() {
-					g.deps = append(g.deps, path.Path())
-					addLocationLabel(tag.label, []string{path.Path().String()})
-					seenTools[tag.label] = true
-				} else {
-					ctx.ModuleErrorf("host tool %q missing output file", tool)
-				}
+				seenTools[tag.label] = true
 			}
 		})
 
@@ -305,8 +321,12 @@
 
 	for _, toolFile := range g.properties.Tool_files {
 		paths := android.PathsForModuleSrc(ctx, []string{toolFile})
-		g.deps = append(g.deps, paths...)
-		addLocationLabel(toolFile, paths.Strings())
+		tools = append(tools, paths...)
+		var sandboxPaths []string
+		for _, path := range paths {
+			sandboxPaths = append(sandboxPaths, android.SboxPathForTool(ctx, path))
+		}
+		addLocationLabel(toolFile, sandboxPaths)
 	}
 
 	var srcFiles android.Paths
@@ -358,7 +378,7 @@
 		manifestPath := android.PathForModuleOut(ctx, manifestName)
 
 		// Use a RuleBuilder to create a rule that runs the command inside an sbox sandbox.
-		rule := android.NewRuleBuilder(pctx, ctx).Sbox(task.genDir, manifestPath)
+		rule := android.NewRuleBuilder(pctx, ctx).Sbox(task.genDir, manifestPath).SandboxTools()
 		cmd := rule.Command()
 
 		for _, out := range task.out {
@@ -448,8 +468,9 @@
 		cmd.Text(rawCommand)
 		cmd.ImplicitOutputs(task.out)
 		cmd.Implicits(task.in)
-		cmd.Implicits(g.deps)
-		cmd.Implicits(task.extraTools)
+		cmd.ImplicitTools(tools)
+		cmd.ImplicitTools(task.extraTools)
+		cmd.ImplicitPackagedTools(packagedTools)
 		if Bool(g.properties.Depfile) {
 			cmd.ImplicitDepFile(task.depFile)
 		}
@@ -616,7 +637,7 @@
 			// TODO(ccross): this RuleBuilder is a hack to be able to call
 			// rule.Command().PathForOutput.  Replace this with passing the rule into the
 			// generator.
-			rule := android.NewRuleBuilder(pctx, ctx).Sbox(genDir, nil)
+			rule := android.NewRuleBuilder(pctx, ctx).Sbox(genDir, nil).SandboxTools()
 
 			for _, in := range shard {
 				outFile := android.GenPathWithExt(ctx, finalSubDir, in, String(properties.Output_extension))
@@ -669,7 +690,8 @@
 				outputDepfile = android.PathForModuleGen(ctx, genSubDir, "gensrcs.d")
 				depFixerTool := ctx.Config().HostToolPath(ctx, "dep_fixer")
 				fullCommand += fmt.Sprintf(" && %s -o $(depfile) %s",
-					depFixerTool.String(), strings.Join(commandDepFiles, " "))
+					android.SboxPathForTool(ctx, depFixerTool),
+					strings.Join(commandDepFiles, " "))
 				extraTools = append(extraTools, depFixerTool)
 			}
 
diff --git a/genrule/genrule_test.go b/genrule/genrule_test.go
index 8d3cfcb..3cbfaf1 100644
--- a/genrule/genrule_test.go
+++ b/genrule/genrule_test.go
@@ -141,7 +141,7 @@
 				out: ["out"],
 				cmd: "$(location) > $(out)",
 			`,
-			expect: "out/tool > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/out/bin/tool > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "empty location tool2",
@@ -150,7 +150,7 @@
 				out: ["out"],
 				cmd: "$(location) > $(out)",
 			`,
-			expect: "out/tool > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/out/bin/tool > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "empty location tool file",
@@ -159,7 +159,7 @@
 				out: ["out"],
 				cmd: "$(location) > $(out)",
 			`,
-			expect: "tool_file1 > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/src/tool_file1 > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "empty location tool file fg",
@@ -168,7 +168,7 @@
 				out: ["out"],
 				cmd: "$(location) > $(out)",
 			`,
-			expect: "tool_file1 > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/src/tool_file1 > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "empty location tool and tool file",
@@ -178,7 +178,7 @@
 				out: ["out"],
 				cmd: "$(location) > $(out)",
 			`,
-			expect: "out/tool > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/out/bin/tool > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "tool",
@@ -187,7 +187,7 @@
 				out: ["out"],
 				cmd: "$(location tool) > $(out)",
 			`,
-			expect: "out/tool > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/out/bin/tool > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "tool2",
@@ -196,7 +196,7 @@
 				out: ["out"],
 				cmd: "$(location :tool) > $(out)",
 			`,
-			expect: "out/tool > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/out/bin/tool > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "tool file",
@@ -205,7 +205,7 @@
 				out: ["out"],
 				cmd: "$(location tool_file1) > $(out)",
 			`,
-			expect: "tool_file1 > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/src/tool_file1 > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "tool file fg",
@@ -214,7 +214,7 @@
 				out: ["out"],
 				cmd: "$(location :1tool_file) > $(out)",
 			`,
-			expect: "tool_file1 > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/src/tool_file1 > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "tool files",
@@ -223,7 +223,7 @@
 				out: ["out"],
 				cmd: "$(locations :tool_files) > $(out)",
 			`,
-			expect: "tool_file1 tool_file2 > __SBOX_SANDBOX_DIR__/out/out",
+			expect: "__SBOX_SANDBOX_DIR__/tools/src/tool_file1 __SBOX_SANDBOX_DIR__/tools/src/tool_file2 > __SBOX_SANDBOX_DIR__/out/out",
 		},
 		{
 			name: "in1",
@@ -600,7 +600,7 @@
 				cmd: "$(location) $(in) > $(out)",
 			`,
 			cmds: []string{
-				"bash -c 'out/tool in1.txt > __SBOX_SANDBOX_DIR__/out/in1.h' && bash -c 'out/tool in2.txt > __SBOX_SANDBOX_DIR__/out/in2.h'",
+				"bash -c '__SBOX_SANDBOX_DIR__/tools/out/bin/tool in1.txt > __SBOX_SANDBOX_DIR__/out/in1.h' && bash -c '__SBOX_SANDBOX_DIR__/tools/out/bin/tool in2.txt > __SBOX_SANDBOX_DIR__/out/in2.h'",
 			},
 			deps:  []string{buildDir + "/.intermediates/gen/gen/gensrcs/in1.h", buildDir + "/.intermediates/gen/gen/gensrcs/in2.h"},
 			files: []string{buildDir + "/.intermediates/gen/gen/gensrcs/in1.h", buildDir + "/.intermediates/gen/gen/gensrcs/in2.h"},
@@ -614,8 +614,8 @@
 				shard_size: 2,
 			`,
 			cmds: []string{
-				"bash -c 'out/tool in1.txt > __SBOX_SANDBOX_DIR__/out/in1.h' && bash -c 'out/tool in2.txt > __SBOX_SANDBOX_DIR__/out/in2.h'",
-				"bash -c 'out/tool in3.txt > __SBOX_SANDBOX_DIR__/out/in3.h'",
+				"bash -c '__SBOX_SANDBOX_DIR__/tools/out/bin/tool in1.txt > __SBOX_SANDBOX_DIR__/out/in1.h' && bash -c '__SBOX_SANDBOX_DIR__/tools/out/bin/tool in2.txt > __SBOX_SANDBOX_DIR__/out/in2.h'",
+				"bash -c '__SBOX_SANDBOX_DIR__/tools/out/bin/tool in3.txt > __SBOX_SANDBOX_DIR__/out/in3.h'",
 			},
 			deps:  []string{buildDir + "/.intermediates/gen/gen/gensrcs/in1.h", buildDir + "/.intermediates/gen/gen/gensrcs/in2.h", buildDir + "/.intermediates/gen/gen/gensrcs/in3.h"},
 			files: []string{buildDir + "/.intermediates/gen/gen/gensrcs/in1.h", buildDir + "/.intermediates/gen/gen/gensrcs/in2.h", buildDir + "/.intermediates/gen/gen/gensrcs/in3.h"},
@@ -757,7 +757,7 @@
 }
 
 func (t *testTool) GenerateAndroidBuildActions(ctx android.ModuleContext) {
-	t.outputFile = android.PathForTesting("out", ctx.ModuleName())
+	t.outputFile = ctx.InstallFile(android.PathForModuleInstall(ctx, "bin"), ctx.ModuleName(), android.PathForOutput(ctx, ctx.ModuleName()))
 }
 
 func (t *testTool) HostToolPath() android.OptionalPath {