diff --git a/android/apex.go b/android/apex.go
index 934cf72..b583be3 100644
--- a/android/apex.go
+++ b/android/apex.go
@@ -711,8 +711,8 @@
 
 // NewApexContents creates and initializes an ApexContents that is suitable
 // for use with an apex module.
-// * contents is a map from a module name to information about its membership within
-//   the apex.
+//   - contents is a map from a module name to information about its membership within
+//     the apex.
 func NewApexContents(contents map[string]ApexMembership) *ApexContents {
 	return &ApexContents{
 		contents: contents,
diff --git a/android/arch.go b/android/arch.go
index b5bd2f0..a0895ed 100644
--- a/android/arch.go
+++ b/android/arch.go
@@ -524,26 +524,29 @@
 // archMutator splits a module into a variant for each Target requested by the module.  Target selection
 // for a module is in three levels, OsClass, multilib, and then Target.
 // OsClass selection is determined by:
-//    - The HostOrDeviceSupported value passed in to InitAndroidArchModule by the module type factory, which selects
-//      whether the module type can compile for host, device or both.
-//    - The host_supported and device_supported properties on the module.
+//   - The HostOrDeviceSupported value passed in to InitAndroidArchModule by the module type factory, which selects
+//     whether the module type can compile for host, device or both.
+//   - The host_supported and device_supported properties on the module.
+//
 // If host is supported for the module, the Host and HostCross OsClasses are selected.  If device is supported
 // for the module, the Device OsClass is selected.
 // Within each selected OsClass, the multilib selection is determined by:
-//    - The compile_multilib property if it set (which may be overridden by target.android.compile_multilib or
-//      target.host.compile_multilib).
-//    - The default multilib passed to InitAndroidArchModule if compile_multilib was not set.
+//   - The compile_multilib property if it set (which may be overridden by target.android.compile_multilib or
+//     target.host.compile_multilib).
+//   - The default multilib passed to InitAndroidArchModule if compile_multilib was not set.
+//
 // Valid multilib values include:
-//    "both": compile for all Targets supported by the OsClass (generally x86_64 and x86, or arm64 and arm).
-//    "first": compile for only a single preferred Target supported by the OsClass.  This is generally x86_64 or arm64,
-//        but may be arm for a 32-bit only build.
-//    "32": compile for only a single 32-bit Target supported by the OsClass.
-//    "64": compile for only a single 64-bit Target supported by the OsClass.
-//    "common": compile a for a single Target that will work on all Targets supported by the OsClass (for example Java).
-//    "common_first": compile a for a Target that will work on all Targets supported by the OsClass
-//        (same as "common"), plus a second Target for the preferred Target supported by the OsClass
-//        (same as "first").  This is used for java_binary that produces a common .jar and a wrapper
-//        executable script.
+//
+//	"both": compile for all Targets supported by the OsClass (generally x86_64 and x86, or arm64 and arm).
+//	"first": compile for only a single preferred Target supported by the OsClass.  This is generally x86_64 or arm64,
+//	    but may be arm for a 32-bit only build.
+//	"32": compile for only a single 32-bit Target supported by the OsClass.
+//	"64": compile for only a single 64-bit Target supported by the OsClass.
+//	"common": compile a for a single Target that will work on all Targets supported by the OsClass (for example Java).
+//	"common_first": compile a for a Target that will work on all Targets supported by the OsClass
+//	    (same as "common"), plus a second Target for the preferred Target supported by the OsClass
+//	    (same as "first").  This is used for java_binary that produces a common .jar and a wrapper
+//	    executable script.
 //
 // Once the list of Targets is determined, the module is split into a variant for each Target.
 //
@@ -1215,11 +1218,13 @@
 
 // Returns the struct containing the properties specific to the given
 // architecture type. These look like this in Blueprint files:
-// arch: {
-//     arm64: {
-//         key: value,
-//     },
-// },
+//
+//	arch: {
+//	    arm64: {
+//	        key: value,
+//	    },
+//	},
+//
 // This struct will also contain sub-structs containing to the architecture/CPU
 // variants and features that themselves contain properties specific to those.
 func getArchTypeStruct(ctx ArchVariantContext, archProperties interface{}, archType ArchType) (reflect.Value, bool) {
@@ -1231,11 +1236,12 @@
 
 // Returns the struct containing the properties specific to a given multilib
 // value. These look like this in the Blueprint file:
-// multilib: {
-//     lib32: {
-//         key: value,
-//     },
-// },
+//
+//	multilib: {
+//	    lib32: {
+//	        key: value,
+//	    },
+//	},
 func getMultilibStruct(ctx ArchVariantContext, archProperties interface{}, archType ArchType) (reflect.Value, bool) {
 	archPropValues := reflect.ValueOf(archProperties).Elem()
 	multilibProp := archPropValues.FieldByName("Multilib").Elem()
@@ -2010,9 +2016,10 @@
 // arch-variant properties correspond to the values of the properties of the 'propertySet' struct
 // that are specific to that axis/configuration. Each axis is independent, containing
 // non-overlapping configs that correspond to the various "arch-variant" support, at this time:
-//    arches (including multilib)
-//    oses
-//    arch+os combinations
+//
+//	arches (including multilib)
+//	oses
+//	arch+os combinations
 //
 // For example, passing a struct { Foo bool, Bar string } will return an interface{} that can be
 // type asserted back into the same struct, containing the config-specific property value specified
@@ -2165,17 +2172,21 @@
 
 // Returns a struct matching the propertySet interface, containing properties specific to the targetName
 // For example, given these arguments:
-//    propertySet = BaseCompilerProperties
-//    targetName = "android_arm"
+//
+//	propertySet = BaseCompilerProperties
+//	targetName = "android_arm"
+//
 // And given this Android.bp fragment:
-//    target:
-//       android_arm: {
-//          srcs: ["foo.c"],
-//       }
-//       android_arm64: {
-//          srcs: ["bar.c"],
-//      }
-//    }
+//
+//	target:
+//	   android_arm: {
+//	      srcs: ["foo.c"],
+//	   }
+//	   android_arm64: {
+//	      srcs: ["bar.c"],
+//	  }
+//	}
+//
 // This would return a BaseCompilerProperties with BaseCompilerProperties.Srcs = ["foo.c"]
 func getTargetStructs(ctx ArchVariantContext, archProperties []interface{}, targetName string) []reflect.Value {
 	var propertyStructs []reflect.Value
diff --git a/android/bazel_paths.go b/android/bazel_paths.go
index c030aa8..bbdae96 100644
--- a/android/bazel_paths.go
+++ b/android/bazel_paths.go
@@ -221,9 +221,13 @@
 // Transform a path (if necessary) to acknowledge package boundaries
 //
 // e.g. something like
-//   async_safe/include/async_safe/CHECK.h
+//
+//	async_safe/include/async_safe/CHECK.h
+//
 // might become
-//   //bionic/libc/async_safe:include/async_safe/CHECK.h
+//
+//	//bionic/libc/async_safe:include/async_safe/CHECK.h
+//
 // if the "async_safe" directory is actually a package and not just a directory.
 //
 // In particular, paths that extend into packages are transformed into absolute labels beginning with //.
@@ -303,20 +307,21 @@
 // directory and Bazel target labels, excluding those included in the excludes argument (which
 // should already be expanded to resolve references to Soong-modules). Valid elements of paths
 // include:
-// * filepath, relative to local module directory, resolves as a filepath relative to the local
-//   source directory
-// * glob, relative to the local module directory, resolves as filepath(s), relative to the local
-//    module directory. Because Soong does not have a concept of crossing package boundaries, the
-//    glob as computed by Soong may contain paths that cross package-boundaries that would be
-//    unknowingly omitted if the glob were handled by Bazel. To allow identification and detect
-//    (within Bazel) use of paths that cross package boundaries, we expand globs within Soong rather
-//    than converting Soong glob syntax to Bazel glob syntax. **Invalid for excludes.**
-// * other modules using the ":name{.tag}" syntax. These modules must implement SourceFileProducer
-//    or OutputFileProducer. These resolve as a Bazel label for a target. If the Bazel target is in
-//    the local module directory, it will be returned relative to the current package (e.g.
-//    ":<target>"). Otherwise, it will be returned as an absolute Bazel label (e.g.
-//    "//path/to/dir:<target>"). If the reference to another module cannot be resolved,the function
-//    will panic.
+//   - filepath, relative to local module directory, resolves as a filepath relative to the local
+//     source directory
+//   - glob, relative to the local module directory, resolves as filepath(s), relative to the local
+//     module directory. Because Soong does not have a concept of crossing package boundaries, the
+//     glob as computed by Soong may contain paths that cross package-boundaries that would be
+//     unknowingly omitted if the glob were handled by Bazel. To allow identification and detect
+//     (within Bazel) use of paths that cross package boundaries, we expand globs within Soong rather
+//     than converting Soong glob syntax to Bazel glob syntax. **Invalid for excludes.**
+//   - other modules using the ":name{.tag}" syntax. These modules must implement SourceFileProducer
+//     or OutputFileProducer. These resolve as a Bazel label for a target. If the Bazel target is in
+//     the local module directory, it will be returned relative to the current package (e.g.
+//     ":<target>"). Otherwise, it will be returned as an absolute Bazel label (e.g.
+//     "//path/to/dir:<target>"). If the reference to another module cannot be resolved,the function
+//     will panic.
+//
 // Properties passed as the paths or excludes argument must have been annotated with struct tag
 // `android:"path"` so that dependencies on other modules will have already been handled by the
 // path_deps mutator.
diff --git a/android/bazel_test.go b/android/bazel_test.go
index e14649e..da4a915 100644
--- a/android/bazel_test.go
+++ b/android/bazel_test.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//     http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/android/config_bp2build.go b/android/config_bp2build.go
index 748be62..d6b2bcf 100644
--- a/android/config_bp2build.go
+++ b/android/config_bp2build.go
@@ -240,10 +240,12 @@
 // ExportedVariableReferenceDictVariables is a mapping from variable names to a
 // dictionary which references previously defined variables. This is used to
 // create a Starlark output such as:
-// 		string_var1 = "string1
-// 		var_ref_dict_var1 = {
-// 			"key1": string_var1
-// 		}
+//
+//	string_var1 = "string1
+//	var_ref_dict_var1 = {
+//		"key1": string_var1
+//	}
+//
 // This type of variable collection must be expanded last so that it recognizes
 // previously defined variables.
 type ExportedVariableReferenceDictVariables map[string]map[string]string
diff --git a/android/defaults.go b/android/defaults.go
index 54f44bc..03b2efb 100644
--- a/android/defaults.go
+++ b/android/defaults.go
@@ -151,12 +151,12 @@
 // retrieve the values it is necessary to iterate over properties(). E.g. to get
 // the commonProperties instance that have the real values:
 //
-//   d := myModule.(Defaults)
-//   for _, props := range d.properties() {
-//     if cp, ok := props.(*commonProperties); ok {
-//       ... access property values in cp ...
-//     }
-//   }
+//	d := myModule.(Defaults)
+//	for _, props := range d.properties() {
+//	  if cp, ok := props.(*commonProperties); ok {
+//	    ... access property values in cp ...
+//	  }
+//	}
 //
 // The rationale is that the properties on a defaults module apply to the
 // defaultable modules using it, not to the defaults module itself. E.g. setting
diff --git a/android/fixture.go b/android/fixture.go
index 0690a5a..f718935 100644
--- a/android/fixture.go
+++ b/android/fixture.go
@@ -420,11 +420,13 @@
 // instances.
 //
 // base      - a list of already flattened and deduped preparers that will be applied first before
-//             the list of additional preparers. Any duplicates of these in the additional preparers
-//             will be ignored.
+//
+//	the list of additional preparers. Any duplicates of these in the additional preparers
+//	will be ignored.
 //
 // preparers - a list of additional unflattened, undeduped preparers that will be applied after the
-//             base preparers.
+//
+//	base preparers.
 //
 // Returns a deduped and flattened list of the preparers starting with the ones in base with any
 // additional ones from the preparers list added afterwards.
@@ -498,10 +500,10 @@
 // FixtureErrorHandler determines how to respond to errors reported by the code under test.
 //
 // Some possible responses:
-// * Fail the test if any errors are reported, see FixtureExpectsNoErrors.
-// * Fail the test if at least one error that matches a pattern is not reported see
-//   FixtureExpectsAtLeastOneErrorMatchingPattern
-// * Fail the test if any unexpected errors are reported.
+//   - Fail the test if any errors are reported, see FixtureExpectsNoErrors.
+//   - Fail the test if at least one error that matches a pattern is not reported see
+//     FixtureExpectsAtLeastOneErrorMatchingPattern
+//   - Fail the test if any unexpected errors are reported.
 //
 // Although at the moment all the error handlers are implemented as simply a wrapper around a
 // function this is defined as an interface to allow future enhancements, e.g. provide different
@@ -866,10 +868,12 @@
 // that produced this result.
 //
 // e.g. assuming that this result was created by running:
-//     GroupFixturePreparers(preparer1, preparer2, preparer3).RunTest(t)
+//
+//	GroupFixturePreparers(preparer1, preparer2, preparer3).RunTest(t)
 //
 // Then this method will be equivalent to running:
-//     GroupFixturePreparers(preparer1, preparer2, preparer3)
+//
+//	GroupFixturePreparers(preparer1, preparer2, preparer3)
 //
 // This is intended for use by tests whose output is Android.bp files to verify that those files
 // are valid, e.g. tests of the snapshots produced by the sdk module type.
diff --git a/android/module.go b/android/module.go
index a75a3cc..bf62080 100644
--- a/android/module.go
+++ b/android/module.go
@@ -1109,7 +1109,7 @@
 // property structs for architecture-specific versions of generic properties tagged with
 // `android:"arch_variant"`.
 //
-// InitAndroidModule should not be called if InitAndroidArchModule was called.
+//	InitAndroidModule should not be called if InitAndroidArchModule was called.
 func InitAndroidArchModule(m Module, hod HostOrDeviceSupported, defaultMultilib Multilib) {
 	InitAndroidModule(m)
 
diff --git a/android/paths.go b/android/paths.go
index f8e7018..74d9f13 100644
--- a/android/paths.go
+++ b/android/paths.go
@@ -387,20 +387,21 @@
 }
 
 // PathsForModuleSrc returns a Paths{} containing the resolved references in paths:
-// * filepath, relative to local module directory, resolves as a filepath relative to the local
-//   source directory
-// * glob, relative to the local module directory, resolves as filepath(s), relative to the local
-//  source directory.
-// * other modules using the ":name{.tag}" syntax. These modules must implement SourceFileProducer
-//    or OutputFileProducer. These resolve as a filepath to an output filepath or generated source
-//    filepath.
+//   - filepath, relative to local module directory, resolves as a filepath relative to the local
+//     source directory
+//   - glob, relative to the local module directory, resolves as filepath(s), relative to the local
+//     source directory.
+//   - other modules using the ":name{.tag}" syntax. These modules must implement SourceFileProducer
+//     or OutputFileProducer. These resolve as a filepath to an output filepath or generated source
+//     filepath.
+//
 // Properties passed as the paths argument must have been annotated with struct tag
 // `android:"path"` so that dependencies on SourceFileProducer modules will have already been handled by the
 // path_deps mutator.
 // If a requested module is not found as a dependency:
-//   * if ctx.Config().AllowMissingDependencies() is true, this module to be marked as having
+//   - if ctx.Config().AllowMissingDependencies() is true, this module to be marked as having
 //     missing dependencies
-//   * otherwise, a ModuleError is thrown.
+//   - otherwise, a ModuleError is thrown.
 func PathsForModuleSrc(ctx ModuleMissingDepsPathContext, paths []string) Paths {
 	return PathsForModuleSrcExcludes(ctx, paths, nil)
 }
@@ -414,21 +415,22 @@
 
 // PathsForModuleSrcExcludes returns a Paths{} containing the resolved references in paths, minus
 // those listed in excludes. Elements of paths and excludes are resolved as:
-// * filepath, relative to local module directory, resolves as a filepath relative to the local
-//   source directory
-// * glob, relative to the local module directory, resolves as filepath(s), relative to the local
-//  source directory. Not valid in excludes.
-// * other modules using the ":name{.tag}" syntax. These modules must implement SourceFileProducer
-//    or OutputFileProducer. These resolve as a filepath to an output filepath or generated source
-//    filepath.
+//   - filepath, relative to local module directory, resolves as a filepath relative to the local
+//     source directory
+//   - glob, relative to the local module directory, resolves as filepath(s), relative to the local
+//     source directory. Not valid in excludes.
+//   - other modules using the ":name{.tag}" syntax. These modules must implement SourceFileProducer
+//     or OutputFileProducer. These resolve as a filepath to an output filepath or generated source
+//     filepath.
+//
 // excluding the items (similarly resolved
 // Properties passed as the paths argument must have been annotated with struct tag
 // `android:"path"` so that dependencies on SourceFileProducer modules will have already been handled by the
 // path_deps mutator.
 // If a requested module is not found as a dependency:
-//   * if ctx.Config().AllowMissingDependencies() is true, this module to be marked as having
+//   - if ctx.Config().AllowMissingDependencies() is true, this module to be marked as having
 //     missing dependencies
-//   * otherwise, a ModuleError is thrown.
+//   - otherwise, a ModuleError is thrown.
 func PathsForModuleSrcExcludes(ctx ModuleMissingDepsPathContext, paths, excludes []string) Paths {
 	return PathsRelativeToModuleSourceDir(SourceInput{
 		Context:      ctx,
@@ -548,13 +550,14 @@
 
 // PathsAndMissingDepsForModuleSrcExcludes returns a Paths{} containing the resolved references in
 // paths, minus those listed in excludes. Elements of paths and excludes are resolved as:
-// * filepath, relative to local module directory, resolves as a filepath relative to the local
-//   source directory
-// * glob, relative to the local module directory, resolves as filepath(s), relative to the local
-//  source directory. Not valid in excludes.
-// * other modules using the ":name{.tag}" syntax. These modules must implement SourceFileProducer
-//    or OutputFileProducer. These resolve as a filepath to an output filepath or generated source
-//    filepath.
+//   - filepath, relative to local module directory, resolves as a filepath relative to the local
+//     source directory
+//   - glob, relative to the local module directory, resolves as filepath(s), relative to the local
+//     source directory. Not valid in excludes.
+//   - other modules using the ":name{.tag}" syntax. These modules must implement SourceFileProducer
+//     or OutputFileProducer. These resolve as a filepath to an output filepath or generated source
+//     filepath.
+//
 // and a list of the module names of missing module dependencies are returned as the second return.
 // Properties passed as the paths argument must have been annotated with struct tag
 // `android:"path"` so that dependencies on SourceFileProducer modules will have already been handled by the
diff --git a/android/register.go b/android/register.go
index 4ff8fff..5832b1b 100644
--- a/android/register.go
+++ b/android/register.go
@@ -258,20 +258,20 @@
 
 // Used to register build components from an init() method, e.g.
 //
-// init() {
-//   RegisterBuildComponents(android.InitRegistrationContext)
-// }
+//	init() {
+//	  RegisterBuildComponents(android.InitRegistrationContext)
+//	}
 //
-// func RegisterBuildComponents(ctx android.RegistrationContext) {
-//   ctx.RegisterModuleType(...)
-//   ...
-// }
+//	func RegisterBuildComponents(ctx android.RegistrationContext) {
+//	  ctx.RegisterModuleType(...)
+//	  ...
+//	}
 //
 // Extracting the actual registration into a separate RegisterBuildComponents(ctx) function
 // allows it to be used to initialize test context, e.g.
 //
-//   ctx := android.NewTestContext(config)
-//   RegisterBuildComponents(ctx)
+//	ctx := android.NewTestContext(config)
+//	RegisterBuildComponents(ctx)
 var InitRegistrationContext RegistrationContext = &initRegistrationContext{
 	moduleTypes:       make(map[string]ModuleFactory),
 	singletonTypes:    make(map[string]SingletonFactory),
diff --git a/android/rule_builder.go b/android/rule_builder.go
index 11da36c..155fbdf 100644
--- a/android/rule_builder.go
+++ b/android/rule_builder.go
@@ -1031,7 +1031,8 @@
 // be also added to the dependencies returned by RuleBuilder.Tools.
 //
 // It is equivalent to:
-//  cmd.Tool(ctx.Config().HostToolPath(ctx, tool))
+//
+//	cmd.Tool(ctx.Config().HostToolPath(ctx, tool))
 func (c *RuleBuilderCommand) BuiltTool(tool string) *RuleBuilderCommand {
 	if c.rule.ctx.Config().UseHostMusl() {
 		// If the host is using musl, assume that the tool was built against musl libc and include
@@ -1053,7 +1054,8 @@
 // dependencies returned by RuleBuilder.Tools.
 //
 // It is equivalent to:
-//  cmd.Tool(ctx.Config().PrebuiltBuildTool(ctx, tool))
+//
+//	cmd.Tool(ctx.Config().PrebuiltBuildTool(ctx, tool))
 func (c *RuleBuilderCommand) PrebuiltBuildTool(ctx PathContext, tool string) *RuleBuilderCommand {
 	return c.Tool(ctx.Config().PrebuiltBuildTool(ctx, tool))
 }
diff --git a/android/sdk.go b/android/sdk.go
index a71f7f2..a477cba 100644
--- a/android/sdk.go
+++ b/android/sdk.go
@@ -430,13 +430,13 @@
 // required for some members but not others. Traits can cause additional information to be output
 // to the sdk snapshot or replace the default information exported for a member with something else.
 // e.g.
-// * By default cc libraries only export the default image variants to the SDK. However, for some
-//   members it may be necessary to export specific image variants, e.g. vendor, or recovery.
-// * By default cc libraries export all the configured architecture variants except for the native
-//   bridge architecture variants. However, for some members it may be necessary to export the
-//   native bridge architecture variants as well.
-// * By default cc libraries export the platform variant (i.e. sdk:). However, for some members it
-//   may be necessary to export the sdk variant (i.e. sdk:sdk).
+//   - By default cc libraries only export the default image variants to the SDK. However, for some
+//     members it may be necessary to export specific image variants, e.g. vendor, or recovery.
+//   - By default cc libraries export all the configured architecture variants except for the native
+//     bridge architecture variants. However, for some members it may be necessary to export the
+//     native bridge architecture variants as well.
+//   - By default cc libraries export the platform variant (i.e. sdk:). However, for some members it
+//     may be necessary to export the sdk variant (i.e. sdk:sdk).
 //
 // A sdk can request a module to provide no traits, one trait or a collection of traits. The exact
 // behavior of a trait is determined by how SdkMemberType implementations handle the traits. A trait
@@ -447,17 +447,17 @@
 // SdkPropertyName(). Each property contains a list of modules that are required to have that trait.
 // e.g. something like this:
 //
-//   sdk {
-//     name: "sdk",
-//     ...
-//     traits: {
-//       recovery_image: ["module1", "module4", "module5"],
-//       native_bridge: ["module1", "module2"],
-//       native_sdk: ["module1", "module3"],
-//       ...
-//     },
-//     ...
-//   }
+//	sdk {
+//	  name: "sdk",
+//	  ...
+//	  traits: {
+//	    recovery_image: ["module1", "module4", "module5"],
+//	    native_bridge: ["module1", "module2"],
+//	    native_sdk: ["module1", "module3"],
+//	    ...
+//	  },
+//	  ...
+//	}
 type SdkMemberTrait interface {
 	// SdkPropertyName returns the name of the traits property on an sdk module.
 	SdkPropertyName() string
@@ -639,20 +639,19 @@
 // The basic implementation should look something like this, where ModuleType is
 // the name of the module type being supported.
 //
-//    type moduleTypeSdkMemberType struct {
-//        android.SdkMemberTypeBase
-//    }
+//	type moduleTypeSdkMemberType struct {
+//	    android.SdkMemberTypeBase
+//	}
 //
-//    func init() {
-//        android.RegisterSdkMemberType(&moduleTypeSdkMemberType{
-//            SdkMemberTypeBase: android.SdkMemberTypeBase{
-//                PropertyName: "module_types",
-//            },
-//        }
-//    }
+//	func init() {
+//	    android.RegisterSdkMemberType(&moduleTypeSdkMemberType{
+//	        SdkMemberTypeBase: android.SdkMemberTypeBase{
+//	            PropertyName: "module_types",
+//	        },
+//	    }
+//	}
 //
-//    ...methods...
-//
+//	...methods...
 type SdkMemberType interface {
 	// SdkPropertyName returns the name of the member type property on an sdk module.
 	SdkPropertyName() string
diff --git a/android/soong_config_modules.go b/android/soong_config_modules.go
index bd73645..b25f248 100644
--- a/android/soong_config_modules.go
+++ b/android/soong_config_modules.go
@@ -190,77 +190,78 @@
 //
 // Each soong_config_variable supports an additional value `conditions_default`. The properties
 // specified in `conditions_default` will only be used under the following conditions:
-//   bool variable: the variable is unspecified or not set to a true value
-//   value variable: the variable is unspecified
-//   string variable: the variable is unspecified or the variable is set to a string unused in the
-//                    given module. For example, string variable `test` takes values: "a" and "b",
-//                    if the module contains a property `a` and `conditions_default`, when test=b,
-//                    the properties under `conditions_default` will be used. To specify that no
-//                    properties should be amended for `b`, you can set `b: {},`.
+//
+//	bool variable: the variable is unspecified or not set to a true value
+//	value variable: the variable is unspecified
+//	string variable: the variable is unspecified or the variable is set to a string unused in the
+//	                 given module. For example, string variable `test` takes values: "a" and "b",
+//	                 if the module contains a property `a` and `conditions_default`, when test=b,
+//	                 the properties under `conditions_default` will be used. To specify that no
+//	                 properties should be amended for `b`, you can set `b: {},`.
 //
 // For example, an Android.bp file could have:
 //
-//     soong_config_module_type {
-//         name: "acme_cc_defaults",
-//         module_type: "cc_defaults",
-//         config_namespace: "acme",
-//         variables: ["board"],
-//         bool_variables: ["feature"],
-//         value_variables: ["width"],
-//         properties: ["cflags", "srcs"],
-//     }
+//	    soong_config_module_type {
+//	        name: "acme_cc_defaults",
+//	        module_type: "cc_defaults",
+//	        config_namespace: "acme",
+//	        variables: ["board"],
+//	        bool_variables: ["feature"],
+//	        value_variables: ["width"],
+//	        properties: ["cflags", "srcs"],
+//	    }
 //
-//     soong_config_string_variable {
-//         name: "board",
-//         values: ["soc_a", "soc_b"],
-//     }
+//	    soong_config_string_variable {
+//	        name: "board",
+//	        values: ["soc_a", "soc_b"],
+//	    }
 //
-//     acme_cc_defaults {
-//         name: "acme_defaults",
-//         cflags: ["-DGENERIC"],
-//         soong_config_variables: {
-//             board: {
-//                 soc_a: {
-//                     cflags: ["-DSOC_A"],
-//                 },
-//                 soc_b: {
-//                     cflags: ["-DSOC_B"],
-//                 },
-//                 conditions_default: {
-//                     cflags: ["-DSOC_DEFAULT"],
-//                 },
-//             },
-//             feature: {
-//                 cflags: ["-DFEATURE"],
-//                 conditions_default: {
-//                     cflags: ["-DFEATURE_DEFAULT"],
-//                 },
-//             },
-//             width: {
-//	               cflags: ["-DWIDTH=%s"],
-//                 conditions_default: {
-//                     cflags: ["-DWIDTH=DEFAULT"],
-//                 },
-//             },
-//         },
-//     }
+//	    acme_cc_defaults {
+//	        name: "acme_defaults",
+//	        cflags: ["-DGENERIC"],
+//	        soong_config_variables: {
+//	            board: {
+//	                soc_a: {
+//	                    cflags: ["-DSOC_A"],
+//	                },
+//	                soc_b: {
+//	                    cflags: ["-DSOC_B"],
+//	                },
+//	                conditions_default: {
+//	                    cflags: ["-DSOC_DEFAULT"],
+//	                },
+//	            },
+//	            feature: {
+//	                cflags: ["-DFEATURE"],
+//	                conditions_default: {
+//	                    cflags: ["-DFEATURE_DEFAULT"],
+//	                },
+//	            },
+//	            width: {
+//		               cflags: ["-DWIDTH=%s"],
+//	                conditions_default: {
+//	                    cflags: ["-DWIDTH=DEFAULT"],
+//	                },
+//	            },
+//	        },
+//	    }
 //
-//     cc_library {
-//         name: "libacme_foo",
-//         defaults: ["acme_defaults"],
-//         srcs: ["*.cpp"],
-//     }
+//	    cc_library {
+//	        name: "libacme_foo",
+//	        defaults: ["acme_defaults"],
+//	        srcs: ["*.cpp"],
+//	    }
 //
 // If an acme BoardConfig.mk file contained:
 //
-//     SOONG_CONFIG_NAMESPACES += acme
-//     SOONG_CONFIG_acme += \
-//         board \
-//         feature \
+//	SOONG_CONFIG_NAMESPACES += acme
+//	SOONG_CONFIG_acme += \
+//	    board \
+//	    feature \
 //
-//     SOONG_CONFIG_acme_board := soc_a
-//     SOONG_CONFIG_acme_feature := true
-//     SOONG_CONFIG_acme_width := 200
+//	SOONG_CONFIG_acme_board := soc_a
+//	SOONG_CONFIG_acme_feature := true
+//	SOONG_CONFIG_acme_width := 200
 //
 // Then libacme_foo would build with cflags "-DGENERIC -DSOC_A -DFEATURE".
 func SoongConfigModuleTypeFactory() Module {
diff --git a/android/soongconfig/modules.go b/android/soongconfig/modules.go
index 212b752..7d21b75 100644
--- a/android/soongconfig/modules.go
+++ b/android/soongconfig/modules.go
@@ -343,23 +343,26 @@
 //
 // For example, the acme_cc_defaults example above would
 // produce a reflect.Value whose type is:
-// *struct {
-//     Soong_config_variables struct {
-//         Board struct {
-//             Soc_a interface{}
-//             Soc_b interface{}
-//         }
-//     }
-// }
+//
+//	*struct {
+//	    Soong_config_variables struct {
+//	        Board struct {
+//	            Soc_a interface{}
+//	            Soc_b interface{}
+//	        }
+//	    }
+//	}
+//
 // And whose value is:
-// &{
-//     Soong_config_variables: {
-//         Board: {
-//             Soc_a: (*struct{ Cflags []string })(nil),
-//             Soc_b: (*struct{ Cflags []string })(nil),
-//         },
-//     },
-// }
+//
+//	&{
+//	    Soong_config_variables: {
+//	        Board: {
+//	            Soc_a: (*struct{ Cflags []string })(nil),
+//	            Soc_b: (*struct{ Cflags []string })(nil),
+//	        },
+//	    },
+//	}
 func CreateProperties(factory blueprint.ModuleFactory, moduleType *ModuleType) reflect.Value {
 	var fields []reflect.StructField
 
diff --git a/android/testing.go b/android/testing.go
index 85bdca4..b4429ca 100644
--- a/android/testing.go
+++ b/android/testing.go
@@ -688,17 +688,17 @@
 //
 // The parts of this structure which are changed are:
 // * BuildParams
-//   * Args
-//   * All Path, Paths, WritablePath and WritablePaths fields.
+//   - Args
+//   - All Path, Paths, WritablePath and WritablePaths fields.
 //
 // * RuleParams
-//   * Command
-//   * Depfile
-//   * Rspfile
-//   * RspfileContent
-//   * SymlinkOutputs
-//   * CommandDeps
-//   * CommandOrderOnly
+//   - Command
+//   - Depfile
+//   - Rspfile
+//   - RspfileContent
+//   - SymlinkOutputs
+//   - CommandDeps
+//   - CommandOrderOnly
 //
 // See PathRelativeToTop for more details.
 //
diff --git a/android/variable.go b/android/variable.go
index 86b8c8f..2d7b0bf 100644
--- a/android/variable.go
+++ b/android/variable.go
@@ -702,20 +702,20 @@
 //
 // If the ProductConfigProperties map contains these items, as parsed from the .bp file:
 //
-// library_linking_strategy: {
-//     prefer_static: {
-//         static_libs: [
-//             "lib_a",
-//             "lib_b",
-//         ],
-//     },
-//     conditions_default: {
-//         shared_libs: [
-//             "lib_a",
-//             "lib_b",
-//         ],
-//     },
-// },
+//	library_linking_strategy: {
+//	    prefer_static: {
+//	        static_libs: [
+//	            "lib_a",
+//	            "lib_b",
+//	        ],
+//	    },
+//	    conditions_default: {
+//	        shared_libs: [
+//	            "lib_a",
+//	            "lib_b",
+//	        ],
+//	    },
+//	},
 //
 // Static_libs {Library_linking_strategy ANDROID prefer_static} [lib_a lib_b]
 // Shared_libs {Library_linking_strategy ANDROID conditions_default} [lib_a lib_b]
@@ -728,13 +728,13 @@
 // instead of putting lib_a and lib_b directly into dynamic_deps without a
 // select:
 //
-// dynamic_deps = select({
-//     "//build/bazel/product_variables:android__library_linking_strategy__prefer_static": [],
-//     "//conditions:default": [
-//         "//foo/bar:lib_a",
-//         "//foo/bar:lib_b",
-//     ],
-// }),
+//	dynamic_deps = select({
+//	    "//build/bazel/product_variables:android__library_linking_strategy__prefer_static": [],
+//	    "//conditions:default": [
+//	        "//foo/bar:lib_a",
+//	        "//foo/bar:lib_b",
+//	    ],
+//	}),
 func (props *ProductConfigProperties) zeroValuesForNamespacedVariables() {
 	// A map of product config properties to the zero values of their respective
 	// property value.
diff --git a/androidmk/androidmk/androidmk.go b/androidmk/androidmk/androidmk.go
index aaafdc7..2e8810f 100644
--- a/androidmk/androidmk/androidmk.go
+++ b/androidmk/androidmk/androidmk.go
@@ -421,9 +421,9 @@
 // For example, if prefix is "foo" and name is "bar" with a value of "baz", then
 // the following variable will be generated:
 //
-// foo {
-//   bar: "baz"
-// }
+//	foo {
+//	  bar: "baz"
+//	}
 //
 // If prefix is the empty string and name is "foo" with a value of "bar", the
 // following variable will be generated (if it is a property):
diff --git a/androidmk/parser/make_strings.go b/androidmk/parser/make_strings.go
index 8afbe7e..be36859 100644
--- a/androidmk/parser/make_strings.go
+++ b/androidmk/parser/make_strings.go
@@ -38,10 +38,10 @@
 // For example, "$(FOO)/bar/baz" will be represented as the
 // following lists:
 //
-// {
-//   Strings: ["", "/bar/baz"],
-//   Variables: ["FOO"]
-// }
+//	{
+//	  Strings: ["", "/bar/baz"],
+//	  Variables: ["FOO"]
+//	}
 type MakeString struct {
 	StringPos Pos
 	Strings   []string
diff --git a/apex/bp2build.go b/apex/bp2build.go
index 221ab13..d28f512 100644
--- a/apex/bp2build.go
+++ b/apex/bp2build.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//     http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/apex/key.go b/apex/key.go
index 9c5bb05..d449589 100644
--- a/apex/key.go
+++ b/apex/key.go
@@ -105,7 +105,7 @@
 	m.keyName = pubKeyName
 }
 
-////////////////////////////////////////////////////////////////////////
+// //////////////////////////////////////////////////////////////////////
 // apex_keys_text
 type apexKeysText struct {
 	output android.OutputPath
diff --git a/apex/prebuilt.go b/apex/prebuilt.go
index 187e0df..172a201 100644
--- a/apex/prebuilt.go
+++ b/apex/prebuilt.go
@@ -364,16 +364,16 @@
 // While it may be possible to provide sufficient information to determine whether two prebuilt_apex
 // modules were compatible it would be a lot of work and would not provide much benefit for a couple
 // of reasons:
-// * The number of prebuilt_apex modules that will be exporting files for the same module will be
-//   low as the prebuilt_apex only exports files for the direct dependencies that require it and
-//   very few modules are direct dependencies of multiple prebuilt_apex modules, e.g. there are a
-//   few com.android.art* apex files that contain the same contents and could export files for the
-//   same modules but only one of them needs to do so. Contrast that with source apex modules which
-//   need apex specific variants for every module that contributes code to the apex, whether direct
-//   or indirect.
-// * The build cost of a prebuilt_apex variant is generally low as at worst it will involve some
-//   extra copying of files. Contrast that with source apex modules that has to build each variant
-//   from source.
+//   - The number of prebuilt_apex modules that will be exporting files for the same module will be
+//     low as the prebuilt_apex only exports files for the direct dependencies that require it and
+//     very few modules are direct dependencies of multiple prebuilt_apex modules, e.g. there are a
+//     few com.android.art* apex files that contain the same contents and could export files for the
+//     same modules but only one of them needs to do so. Contrast that with source apex modules which
+//     need apex specific variants for every module that contributes code to the apex, whether direct
+//     or indirect.
+//   - The build cost of a prebuilt_apex variant is generally low as at worst it will involve some
+//     extra copying of files. Contrast that with source apex modules that has to build each variant
+//     from source.
 func (p *prebuiltCommon) apexInfoMutator(mctx android.TopDownMutatorContext) {
 
 	// Collect direct dependencies into contents.
@@ -703,28 +703,29 @@
 // e.g. make dex implementation jars available for java_import modules listed in exported_java_libs,
 // it does so as follows:
 //
-// 1. It creates a `deapexer` module that actually extracts the files from the `.apex` file and
-//    makes them available for use by other modules, at both Soong and ninja levels.
+//  1. It creates a `deapexer` module that actually extracts the files from the `.apex` file and
+//     makes them available for use by other modules, at both Soong and ninja levels.
 //
-// 2. It adds a dependency onto those modules and creates an apex specific variant similar to what
-//    an `apex` module does. That ensures that code which looks for specific apex variant, e.g.
-//    dexpreopt, will work the same way from source and prebuilt.
+//  2. It adds a dependency onto those modules and creates an apex specific variant similar to what
+//     an `apex` module does. That ensures that code which looks for specific apex variant, e.g.
+//     dexpreopt, will work the same way from source and prebuilt.
 //
-// 3. The `deapexer` module adds a dependency from the modules that require the exported files onto
-//    itself so that they can retrieve the file paths to those files.
+//  3. The `deapexer` module adds a dependency from the modules that require the exported files onto
+//     itself so that they can retrieve the file paths to those files.
 //
 // It also creates a child module `selector` that is responsible for selecting the appropriate
 // input apex for both the prebuilt_apex and the deapexer. That is needed for a couple of reasons:
-// 1. To dedup the selection logic so it only runs in one module.
-// 2. To allow the deapexer to be wired up to a different source for the input apex, e.g. an
-//    `apex_set`.
 //
-//                     prebuilt_apex
-//                    /      |      \
-//                 /         |         \
-//              V            V            V
-//       selector  <---  deapexer  <---  exported java lib
+//  1. To dedup the selection logic so it only runs in one module.
 //
+//  2. To allow the deapexer to be wired up to a different source for the input apex, e.g. an
+//     `apex_set`.
+//
+//     prebuilt_apex
+//     /      |      \
+//     /         |         \
+//     V            V            V
+//     selector  <---  deapexer  <---  exported java lib
 func (p *Prebuilt) createPrebuiltApexModules(ctx android.TopDownMutatorContext) {
 	baseModuleName := p.BaseModuleName()
 
diff --git a/bazel/aquery.go b/bazel/aquery.go
index 418b143..05f6ed4 100644
--- a/bazel/aquery.go
+++ b/bazel/aquery.go
@@ -52,8 +52,9 @@
 
 // AqueryDepset is a depset definition from Bazel's aquery response. This is
 // akin to the `depSetOfFiles` in the response proto, except:
-//   * direct artifacts are enumerated by full path instead of by ID
-//   * it has a hash of the depset contents, instead of an int ID (for determinism)
+//   - direct artifacts are enumerated by full path instead of by ID
+//   - it has a hash of the depset contents, instead of an int ID (for determinism)
+//
 // A depset is a data structure for efficient transitive handling of artifact
 // paths. A single depset consists of one or more artifact paths and one or
 // more "child" depsets.
diff --git a/bazel/properties.go b/bazel/properties.go
index bffd97b..963e27b 100644
--- a/bazel/properties.go
+++ b/bazel/properties.go
@@ -1225,15 +1225,18 @@
 
 // DeduplicateAxesFromBase ensures no duplication of items between the no-configuration value and
 // configuration-specific values. For example, if we would convert this StringListAttribute as:
-// ["a", "b", "c"] + select({
-//    "//condition:one": ["a", "d"],
-//    "//conditions:default": [],
-// })
+//
+//	["a", "b", "c"] + select({
+//	   "//condition:one": ["a", "d"],
+//	   "//conditions:default": [],
+//	})
+//
 // after this function, we would convert this StringListAttribute as:
-// ["a", "b", "c"] + select({
-//    "//condition:one": ["d"],
-//    "//conditions:default": [],
-// })
+//
+//	["a", "b", "c"] + select({
+//	   "//condition:one": ["d"],
+//	   "//conditions:default": [],
+//	})
 func (sla *StringListAttribute) DeduplicateAxesFromBase() {
 	base := sla.Value
 	for axis, configToList := range sla.ConfigurableValues {
diff --git a/bp2build/cc_prebuilt_library_conversion_test.go b/bp2build/cc_prebuilt_library_conversion_test.go
index 74ad005..32c3f4d 100644
--- a/bp2build/cc_prebuilt_library_conversion_test.go
+++ b/bp2build/cc_prebuilt_library_conversion_test.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//     http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/bp2build/cc_prebuilt_library_static_test.go b/bp2build/cc_prebuilt_library_static_test.go
index 7498e50..489a53d 100644
--- a/bp2build/cc_prebuilt_library_static_test.go
+++ b/bp2build/cc_prebuilt_library_static_test.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//     http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/bpfix/bpfix/bpfix.go b/bpfix/bpfix/bpfix.go
index 94b28dc..ddaa98a 100644
--- a/bpfix/bpfix/bpfix.go
+++ b/bpfix/bpfix/bpfix.go
@@ -553,7 +553,9 @@
 
 // If a variable is LOCAL_MODULE, get its value from the 'name' attribute.
 // This handles the statement
-//    LOCAL_SRC_FILES := $(LOCAL_MODULE)
+//
+//	LOCAL_SRC_FILES := $(LOCAL_MODULE)
+//
 // which occurs often.
 func resolveLocalModule(mod *parser.Module, val parser.Expression) parser.Expression {
 	if varLocalName, ok := val.(*parser.Variable); ok {
@@ -567,9 +569,9 @@
 }
 
 // etcPrebuiltModuleUpdate contains information on updating certain parts of a defined module such as:
-//    * changing the module type from prebuilt_etc to a different one
-//    * stripping the prefix of the install path based on the module type
-//    * appending additional boolean properties to the prebuilt module
+//   - changing the module type from prebuilt_etc to a different one
+//   - stripping the prefix of the install path based on the module type
+//   - appending additional boolean properties to the prebuilt module
 type etcPrebuiltModuleUpdate struct {
 	// The prefix of the install path defined in local_module_path. The prefix is removed from local_module_path
 	// before setting the 'filename' attribute.
diff --git a/cc/afdo.go b/cc/afdo.go
index 66e9732..fb66bbe 100644
--- a/cc/afdo.go
+++ b/cc/afdo.go
@@ -66,8 +66,9 @@
 }
 
 // Get list of profile file names, ordered by level of specialisation. For example:
-//   1. libfoo_arm64.afdo
-//   2. libfoo.afdo
+//  1. libfoo_arm64.afdo
+//  2. libfoo.afdo
+//
 // Add more specialisation as needed.
 func getProfileFiles(ctx android.BaseModuleContext, moduleName string) []string {
 	var files []string
diff --git a/cc/fuzz.go b/cc/fuzz.go
index dfc718e..8a8c107 100644
--- a/cc/fuzz.go
+++ b/cc/fuzz.go
@@ -152,10 +152,10 @@
 // IsValidSharedDependency takes a module and determines if it is a unique shared library
 // that should be installed in the fuzz target output directories. This function
 // returns true, unless:
-//  - The module is not an installable shared library, or
-//  - The module is a header or stub, or
-//  - The module is a prebuilt and its source is available, or
-//  - The module is a versioned member of an SDK snapshot.
+//   - The module is not an installable shared library, or
+//   - The module is a header or stub, or
+//   - The module is a prebuilt and its source is available, or
+//   - The module is a versioned member of an SDK snapshot.
 func IsValidSharedDependency(dependency android.Module) bool {
 	// TODO(b/144090547): We should be parsing these modules using
 	// ModuleDependencyTag instead of the current brute-force checking.
diff --git a/cc/genrule.go b/cc/genrule.go
index 239064f..4ef990c 100644
--- a/cc/genrule.go
+++ b/cc/genrule.go
@@ -41,13 +41,13 @@
 // variations.  The following environment variables will be set when the command
 // execute:
 //
-//   CC_ARCH           the name of the architecture the command is being executed for
+//	CC_ARCH           the name of the architecture the command is being executed for
 //
-//   CC_MULTILIB       "lib32" if the architecture the command is being executed for is 32-bit,
-//                     "lib64" if it is 64-bit.
+//	CC_MULTILIB       "lib32" if the architecture the command is being executed for is 32-bit,
+//	                  "lib64" if it is 64-bit.
 //
-//   CC_NATIVE_BRIDGE  the name of the subdirectory that native bridge libraries are stored in if
-//                     the architecture has native bridge enabled, empty if it is disabled.
+//	CC_NATIVE_BRIDGE  the name of the subdirectory that native bridge libraries are stored in if
+//	                  the architecture has native bridge enabled, empty if it is disabled.
 func GenRuleFactory() android.Module {
 	module := genrule.NewGenRule()
 
diff --git a/cc/image.go b/cc/image.go
index 921b2bb..e65a9aa 100644
--- a/cc/image.go
+++ b/cc/image.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/cc/ndk_headers.go b/cc/ndk_headers.go
index 56fd5fc..ef38a06 100644
--- a/cc/ndk_headers.go
+++ b/cc/ndk_headers.go
@@ -148,12 +148,12 @@
 // to the sysroot base + "usr/include" + to directory + directory component.
 // ndk_headers requires the license file to be specified. Example:
 //
-//    Given:
-//    sysroot base = "ndk/sysroot"
-//    from = "include/foo"
-//    to = "bar"
-//    header = "include/foo/woodly/doodly.h"
-//    output path = "ndk/sysroot/usr/include/bar/woodly/doodly.h"
+//	Given:
+//	sysroot base = "ndk/sysroot"
+//	from = "include/foo"
+//	to = "bar"
+//	header = "include/foo/woodly/doodly.h"
+//	output path = "ndk/sysroot/usr/include/bar/woodly/doodly.h"
 func ndkHeadersFactory() android.Module {
 	module := &headerModule{}
 	module.AddProperties(&module.properties)
@@ -275,15 +275,17 @@
 	return module
 }
 
-// preprocessed_ndk_header {
-//     name: "foo",
-//     preprocessor: "foo.sh",
-//     srcs: [...],
-//     to: "android",
-// }
+//	preprocessed_ndk_header {
+//	    name: "foo",
+//	    preprocessor: "foo.sh",
+//	    srcs: [...],
+//	    to: "android",
+//	}
 //
 // Will invoke the preprocessor as:
-//     $preprocessor -o $SYSROOT/usr/include/android/needs_preproc.h $src
+//
+//	$preprocessor -o $SYSROOT/usr/include/android/needs_preproc.h $src
+//
 // For each src in srcs.
 type preprocessedHeadersProperties struct {
 	// The preprocessor to run. Must be a program inside the source directory
diff --git a/cc/ndk_library.go b/cc/ndk_library.go
index 0879257..2bbfc4a 100644
--- a/cc/ndk_library.go
+++ b/cc/ndk_library.go
@@ -84,12 +84,11 @@
 //
 // Example:
 //
-// ndk_library {
-//     name: "libfoo",
-//     symbol_file: "libfoo.map.txt",
-//     first_version: "9",
-// }
-//
+//	ndk_library {
+//	    name: "libfoo",
+//	    symbol_file: "libfoo.map.txt",
+//	    first_version: "9",
+//	}
 type libraryProperties struct {
 	// Relative path to the symbol map.
 	// An example file can be seen here: TODO(danalbert): Make an example.
diff --git a/cc/prebuilt.go b/cc/prebuilt.go
index 8c404d3..a2d4503 100644
--- a/cc/prebuilt.go
+++ b/cc/prebuilt.go
@@ -348,10 +348,10 @@
 
 // TODO(b/228623543): The below is not entirely true until the bug is fixed. For now, both targets are always generated
 // Implements bp2build for cc_prebuilt_library modules. This will generate:
-// * Only a prebuilt_library_static if the shared.enabled property is set to false across all variants.
-// * Only a prebuilt_library_shared if the static.enabled property is set to false across all variants
-// * Both a prebuilt_library_static and prebuilt_library_shared if the aforementioned properties are not false across
-//   all variants
+//   - Only a prebuilt_library_static if the shared.enabled property is set to false across all variants.
+//   - Only a prebuilt_library_shared if the static.enabled property is set to false across all variants
+//   - Both a prebuilt_library_static and prebuilt_library_shared if the aforementioned properties are not false across
+//     all variants
 //
 // In all cases, prebuilt_library_static target names will be appended with "_bp2build_cc_library_static".
 func prebuiltLibraryBp2Build(ctx android.TopDownMutatorContext, module *Module) {
diff --git a/cc/snapshot_prebuilt.go b/cc/snapshot_prebuilt.go
index 9d40ad0..792ffe3 100644
--- a/cc/snapshot_prebuilt.go
+++ b/cc/snapshot_prebuilt.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
@@ -263,12 +263,12 @@
 // version, snapshot arch, etc. It also adds a special suffix to Soong module name, so it doesn't
 // collide with source modules. e.g. the following example module,
 //
-// vendor_snapshot_static {
-//     name: "libbase",
-//     arch: "arm64",
-//     version: 30,
-//     ...
-// }
+//	vendor_snapshot_static {
+//	    name: "libbase",
+//	    arch: "arm64",
+//	    version: 30,
+//	    ...
+//	}
 //
 // will be seen as "libbase.vendor_static.30.arm64" by Soong.
 type BaseSnapshotDecorator struct {
@@ -370,7 +370,6 @@
 	}
 }
 
-//
 // Module definitions for snapshots of libraries (shared, static, header).
 //
 // Modules (vendor|recovery)_snapshot_(shared|static|header) are defined here. Shared libraries and
@@ -630,7 +629,6 @@
 
 var _ snapshotSanitizer = (*snapshotLibraryDecorator)(nil)
 
-//
 // Module definitions for snapshots of executable binaries.
 //
 // Modules (vendor|recovery)_snapshot_binary are defined here. They have their prebuilt executable
@@ -728,7 +726,6 @@
 	return module.Init()
 }
 
-//
 // Module definitions for snapshots of object files (*.o).
 //
 // Modules (vendor|recovery)_snapshot_object are defined here. They have their prebuilt object
diff --git a/cc/snapshot_utils.go b/cc/snapshot_utils.go
index de50ef5..cf4617d 100644
--- a/cc/snapshot_utils.go
+++ b/cc/snapshot_utils.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/cc/vendor_public_library.go b/cc/vendor_public_library.go
index 65a2b0c..f2c8545 100644
--- a/cc/vendor_public_library.go
+++ b/cc/vendor_public_library.go
@@ -28,17 +28,16 @@
 //
 // Example:
 //
-// vendor_public_library {
-//     name: "libfoo",
-//     symbol_file: "libfoo.map.txt",
-//     export_public_headers: ["libfoo_headers"],
-// }
+//	vendor_public_library {
+//	    name: "libfoo",
+//	    symbol_file: "libfoo.map.txt",
+//	    export_public_headers: ["libfoo_headers"],
+//	}
 //
-// cc_headers {
-//     name: "libfoo_headers",
-//     export_include_dirs: ["include"],
-// }
-//
+//	cc_headers {
+//	    name: "libfoo_headers",
+//	    export_include_dirs: ["include"],
+//	}
 type vendorPublicLibraryProperties struct {
 	// Relative path to the symbol map.
 	Symbol_file *string
diff --git a/cc/vendor_snapshot.go b/cc/vendor_snapshot.go
index e7c05ac..77e6f6f 100644
--- a/cc/vendor_snapshot.go
+++ b/cc/vendor_snapshot.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/cc/vndk_prebuilt.go b/cc/vndk_prebuilt.go
index 31b6d10..37819a4 100644
--- a/cc/vndk_prebuilt.go
+++ b/cc/vndk_prebuilt.go
@@ -29,26 +29,25 @@
 //
 // Example:
 //
-// vndk_prebuilt_shared {
-//     name: "libfoo",
-//     version: "27",
-//     target_arch: "arm64",
-//     vendor_available: true,
-//     product_available: true,
-//     vndk: {
-//         enabled: true,
-//     },
-//     export_include_dirs: ["include/external/libfoo/vndk_include"],
-//     arch: {
-//         arm64: {
-//             srcs: ["arm/lib64/libfoo.so"],
-//         },
-//         arm: {
-//             srcs: ["arm/lib/libfoo.so"],
-//         },
-//     },
-// }
-//
+//	vndk_prebuilt_shared {
+//	    name: "libfoo",
+//	    version: "27",
+//	    target_arch: "arm64",
+//	    vendor_available: true,
+//	    product_available: true,
+//	    vndk: {
+//	        enabled: true,
+//	    },
+//	    export_include_dirs: ["include/external/libfoo/vndk_include"],
+//	    arch: {
+//	        arm64: {
+//	            srcs: ["arm/lib64/libfoo.so"],
+//	        },
+//	        arm: {
+//	            srcs: ["arm/lib/libfoo.so"],
+//	        },
+//	    },
+//	}
 type vndkPrebuiltProperties struct {
 	// VNDK snapshot version.
 	Version *string
@@ -250,25 +249,25 @@
 // vndk_prebuilt_shared installs Vendor Native Development kit (VNDK) snapshot
 // shared libraries for system build. Example:
 //
-//    vndk_prebuilt_shared {
-//        name: "libfoo",
-//        version: "27",
-//        target_arch: "arm64",
-//        vendor_available: true,
-//        product_available: true,
-//        vndk: {
-//            enabled: true,
-//        },
-//        export_include_dirs: ["include/external/libfoo/vndk_include"],
-//        arch: {
-//            arm64: {
-//                srcs: ["arm/lib64/libfoo.so"],
-//            },
-//            arm: {
-//                srcs: ["arm/lib/libfoo.so"],
-//            },
-//        },
-//    }
+//	vndk_prebuilt_shared {
+//	    name: "libfoo",
+//	    version: "27",
+//	    target_arch: "arm64",
+//	    vendor_available: true,
+//	    product_available: true,
+//	    vndk: {
+//	        enabled: true,
+//	    },
+//	    export_include_dirs: ["include/external/libfoo/vndk_include"],
+//	    arch: {
+//	        arm64: {
+//	            srcs: ["arm/lib64/libfoo.so"],
+//	        },
+//	        arm: {
+//	            srcs: ["arm/lib/libfoo.so"],
+//	        },
+//	    },
+//	}
 func VndkPrebuiltSharedFactory() android.Module {
 	module := vndkPrebuiltSharedLibrary()
 	return module.Init()
diff --git a/cmd/sbox/sbox.go b/cmd/sbox/sbox.go
index 4f7451d..91e3540 100644
--- a/cmd/sbox/sbox.go
+++ b/cmd/sbox/sbox.go
@@ -208,7 +208,6 @@
 //
 // returns an exec.Cmd that can be ran from within sbox context if no error, or nil if error.
 // caller must ensure script is cleaned up if function succeeds.
-//
 func createCommandScript(rawCommand, scriptPath, scriptPathInSandbox string) (*exec.Cmd, error) {
 	err := os.WriteFile(scriptPath, []byte(rawCommand), 0644)
 	if err != nil {
diff --git a/dexpreopt/class_loader_context.go b/dexpreopt/class_loader_context.go
index 7bc9ab2..afb3de3 100644
--- a/dexpreopt/class_loader_context.go
+++ b/dexpreopt/class_loader_context.go
@@ -25,11 +25,11 @@
 )
 
 // This comment describes the following:
-//   1. the concept of class loader context (CLC) and its relation to classpath
-//   2. how PackageManager constructs CLC from shared libraries and their dependencies
-//   3. build-time vs. run-time CLC and why this matters for dexpreopt
-//   4. manifest fixer: a tool that adds missing <uses-library> tags to the manifests
-//   5. build system support for CLC
+//  1. the concept of class loader context (CLC) and its relation to classpath
+//  2. how PackageManager constructs CLC from shared libraries and their dependencies
+//  3. build-time vs. run-time CLC and why this matters for dexpreopt
+//  4. manifest fixer: a tool that adds missing <uses-library> tags to the manifests
+//  5. build system support for CLC
 //
 // 1. Class loader context
 // -----------------------
@@ -59,15 +59,16 @@
 // loaders are not duplicated (at runtime there is a single class loader instance for each library).
 //
 // Example: A has <uses-library> tags B, C and D; C has <uses-library tags> B and D;
-//          D has <uses-library> E; B and E have no <uses-library> dependencies. The CLC is:
-//    A
-//    ├── B
-//    ├── C
-//    │   ├── B
-//    │   └── D
-//    │       └── E
-//    └── D
-//        └── E
+//
+//	      D has <uses-library> E; B and E have no <uses-library> dependencies. The CLC is:
+//	A
+//	├── B
+//	├── C
+//	│   ├── B
+//	│   └── D
+//	│       └── E
+//	└── D
+//	    └── E
 //
 // CLC defines the lookup order of libraries when resolving Java classes used by the library/app.
 // The lookup order is important because libraries may contain duplicate classes, and the class is
@@ -188,7 +189,6 @@
 // rule generation phase.
 //
 // ClassLoaderContext is a structure that represents CLC.
-//
 type ClassLoaderContext struct {
 	// The name of the library.
 	Name string
@@ -249,7 +249,6 @@
 // generates a build rule that includes conditional CLC for all versions, extracts the target SDK
 // version from the manifest, and filters the CLCs based on that version. Exact final CLC that is
 // passed to dex2oat is unknown to the build system, and gets known only at Ninja stage.
-//
 type ClassLoaderContextMap map[int][]*ClassLoaderContext
 
 // Compatibility libraries. Some are optional, and some are required: this is the default that
@@ -485,7 +484,6 @@
 // constructs class loader context on device.
 //
 // TODO(b/132357300): remove "android.hidl.manager" and "android.hidl.base" for non-system apps.
-//
 func fixClassLoaderContext(clcMap ClassLoaderContextMap) {
 	required, optional := clcMap.UsesLibs()
 	usesLibs := append(required, optional...)
diff --git a/etc/snapshot_etc.go b/etc/snapshot_etc.go
index b54a8a6..0d65ab6 100644
--- a/etc/snapshot_etc.go
+++ b/etc/snapshot_etc.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/finder/finder.go b/finder/finder.go
index c5196c8..054ccd6 100644
--- a/finder/finder.go
+++ b/finder/finder.go
@@ -736,15 +736,15 @@
 // because we know this separator won't appear in the json that we're parsing.
 //
 // The newline byte can only appear in a UTF-8 stream if the newline character appears, because:
-// - The newline character is encoded as "0000 1010" in binary ("0a" in hex)
-// - UTF-8 dictates that bytes beginning with a "0" bit are never emitted as part of a multibyte
-//   character.
+//   - The newline character is encoded as "0000 1010" in binary ("0a" in hex)
+//   - UTF-8 dictates that bytes beginning with a "0" bit are never emitted as part of a multibyte
+//     character.
 //
 // We know that the newline character will never appear in our json string, because:
-// - If a newline character appears as part of a data string, then json encoding will
-//   emit two characters instead: '\' and 'n'.
-// - The json encoder that we use doesn't emit the optional newlines between any of its
-//   other outputs.
+//   - If a newline character appears as part of a data string, then json encoding will
+//     emit two characters instead: '\' and 'n'.
+//   - The json encoder that we use doesn't emit the optional newlines between any of its
+//     other outputs.
 const lineSeparator = byte('\n')
 
 func (f *Finder) readLine(reader *bufio.Reader) ([]byte, error) {
diff --git a/genrule/genrule.go b/genrule/genrule.go
index b796877..6686c87 100644
--- a/genrule/genrule.go
+++ b/genrule/genrule.go
@@ -976,9 +976,7 @@
 var Bool = proptools.Bool
 var String = proptools.String
 
-//
 // Defaults
-//
 type Defaults struct {
 	android.ModuleBase
 	android.DefaultsModuleBase
diff --git a/java/app_import.go b/java/app_import.go
index 4bab14b..d6dca38 100644
--- a/java/app_import.go
+++ b/java/app_import.go
@@ -461,19 +461,19 @@
 // android_app_import imports a prebuilt apk with additional processing specified in the module.
 // DPI-specific apk source files can be specified using dpi_variants. Example:
 //
-//     android_app_import {
-//         name: "example_import",
-//         apk: "prebuilts/example.apk",
-//         dpi_variants: {
-//             mdpi: {
-//                 apk: "prebuilts/example_mdpi.apk",
-//             },
-//             xhdpi: {
-//                 apk: "prebuilts/example_xhdpi.apk",
-//             },
-//         },
-//         presigned: true,
-//     }
+//	android_app_import {
+//	    name: "example_import",
+//	    apk: "prebuilts/example.apk",
+//	    dpi_variants: {
+//	        mdpi: {
+//	            apk: "prebuilts/example_mdpi.apk",
+//	        },
+//	        xhdpi: {
+//	            apk: "prebuilts/example_xhdpi.apk",
+//	        },
+//	    },
+//	    presigned: true,
+//	}
 func AndroidAppImportFactory() android.Module {
 	module := &AndroidAppImport{}
 	module.AddProperties(&module.properties)
diff --git a/java/classpath_element.go b/java/classpath_element.go
index 753e7f8..4962916 100644
--- a/java/classpath_element.go
+++ b/java/classpath_element.go
@@ -97,11 +97,11 @@
 // the list with its Contents field.
 //
 // Requirements/Assumptions:
-// * A fragment can be associated with more than one apex but each apex must only be associated with
-//   a single fragment from the fragments list.
-// * All of a fragment's contents must appear as a contiguous block in the same order in the
-//   libraries list.
-// * Each library must only appear in a single fragment.
+//   - A fragment can be associated with more than one apex but each apex must only be associated with
+//     a single fragment from the fragments list.
+//   - All of a fragment's contents must appear as a contiguous block in the same order in the
+//     libraries list.
+//   - Each library must only appear in a single fragment.
 //
 // The apex is used to identify which libraries belong to which fragment. First a mapping is created
 // from apex to fragment. Then the libraries are iterated over and any library in an apex is
@@ -109,13 +109,15 @@
 // standalone and have their own element.
 //
 // e.g. Given the following input:
-//     libraries: com.android.art:core-oj, com.android.art:core-libart, framework, ext
-//     fragments: com.android.art:art-bootclasspath-fragment
+//
+//	libraries: com.android.art:core-oj, com.android.art:core-libart, framework, ext
+//	fragments: com.android.art:art-bootclasspath-fragment
 //
 // Then this will return:
-//     ClasspathFragmentElement(art-bootclasspath-fragment, [core-oj, core-libart]),
-//     ClasspathLibraryElement(framework),
-//     ClasspathLibraryElement(ext),
+//
+//	ClasspathFragmentElement(art-bootclasspath-fragment, [core-oj, core-libart]),
+//	ClasspathLibraryElement(framework),
+//	ClasspathLibraryElement(ext),
 func CreateClasspathElements(ctx ClasspathElementContext, libraries []android.Module, fragments []android.Module) ClasspathElements {
 	// Create a map from apex name to the fragment module. This makes it easy to find the fragment
 	// associated with a particular apex.
diff --git a/java/dexpreopt_bootjars.go b/java/dexpreopt_bootjars.go
index b4cd07a..4e416fc 100644
--- a/java/dexpreopt_bootjars.go
+++ b/java/dexpreopt_bootjars.go
@@ -418,7 +418,6 @@
 //
 // The location is passed as an argument to the ART tools like dex2oat instead of the real path.
 // ART tools will then reconstruct the architecture-specific real path.
-//
 func (image *bootImageVariant) imageLocations() (imageLocationsOnHost []string, imageLocationsOnDevice []string) {
 	if image.extends != nil {
 		imageLocationsOnHost, imageLocationsOnDevice = image.extends.getVariant(image.target).imageLocations()
diff --git a/java/droiddoc.go b/java/droiddoc.go
index 9663922..901419c 100644
--- a/java/droiddoc.go
+++ b/java/droiddoc.go
@@ -158,9 +158,7 @@
 	Compat_config *string `android:"path"`
 }
 
-//
 // Common flags passed down to build rule
-//
 type droiddocBuilderFlags struct {
 	bootClasspathArgs  string
 	classpathArgs      string
@@ -193,9 +191,7 @@
 	return false
 }
 
-//
 // Javadoc
-//
 type Javadoc struct {
 	android.ModuleBase
 	android.DefaultableModuleBase
@@ -548,9 +544,7 @@
 	rule.Build("javadoc", "javadoc")
 }
 
-//
 // Droiddoc
-//
 type Droiddoc struct {
 	Javadoc
 
@@ -827,9 +821,7 @@
 	rule.Build("javadoc", desc)
 }
 
-//
 // Exported Droiddoc Directory
-//
 var droiddocTemplateTag = dependencyTag{name: "droiddoc-template"}
 
 type ExportedDroiddocDirProperties struct {
@@ -862,9 +854,7 @@
 	d.deps = android.PathsForModuleSrc(ctx, []string{filepath.Join(path, "**/*")})
 }
 
-//
 // Defaults
-//
 type DocDefaults struct {
 	android.ModuleBase
 	android.DefaultsModuleBase
diff --git a/java/droidstubs.go b/java/droidstubs.go
index 115388b..8baf4d3 100644
--- a/java/droidstubs.go
+++ b/java/droidstubs.go
@@ -42,9 +42,7 @@
 	ctx.RegisterModuleType("prebuilt_stubs_sources", PrebuiltStubsSourcesFactory)
 }
 
-//
 // Droidstubs
-//
 type Droidstubs struct {
 	Javadoc
 	android.SdkBase
diff --git a/java/genrule.go b/java/genrule.go
index 5047c41..208e1f4 100644
--- a/java/genrule.go
+++ b/java/genrule.go
@@ -43,23 +43,23 @@
 //
 // Use a java_genrule to package generated java resources:
 //
-//     java_genrule {
-//         name: "generated_resources",
-//         tools: [
-//             "generator",
-//             "soong_zip",
-//         ],
-//         srcs: ["generator_inputs/**/*"],
-//         out: ["generated_android_icu4j_resources.jar"],
-//         cmd: "$(location generator) $(in) -o $(genDir) " +
-//             "&& $(location soong_zip) -o $(out) -C $(genDir)/res -D $(genDir)/res",
-//     }
+//	java_genrule {
+//	    name: "generated_resources",
+//	    tools: [
+//	        "generator",
+//	        "soong_zip",
+//	    ],
+//	    srcs: ["generator_inputs/**/*"],
+//	    out: ["generated_android_icu4j_resources.jar"],
+//	    cmd: "$(location generator) $(in) -o $(genDir) " +
+//	        "&& $(location soong_zip) -o $(out) -C $(genDir)/res -D $(genDir)/res",
+//	}
 //
-//     java_library {
-//         name: "lib_with_generated_resources",
-//         srcs: ["src/**/*.java"],
-//         static_libs: ["generated_resources"],
-//     }
+//	java_library {
+//	    name: "lib_with_generated_resources",
+//	    srcs: ["src/**/*.java"],
+//	    static_libs: ["generated_resources"],
+//	}
 func GenRuleFactory() android.Module {
 	module := genrule.NewGenRule()
 
diff --git a/java/platform_compat_config.go b/java/platform_compat_config.go
index 1c42495..655021f 100644
--- a/java/platform_compat_config.go
+++ b/java/platform_compat_config.go
@@ -280,7 +280,7 @@
 	return &platformCompatConfigSingleton{}
 }
 
-//============== merged_compat_config =================
+// ============== merged_compat_config =================
 type globalCompatConfigProperties struct {
 	// name of the file into which the metadata will be copied.
 	Filename *string
diff --git a/java/sdk_library.go b/java/sdk_library.go
index 490c031..8f499b1 100644
--- a/java/sdk_library.go
+++ b/java/sdk_library.go
@@ -2129,11 +2129,12 @@
 
 // The type of a structure that contains a field of type sdkLibraryScopeProperties
 // for each apiscope in allApiScopes, e.g. something like:
-// struct {
-//   Public sdkLibraryScopeProperties
-//   System sdkLibraryScopeProperties
-//   ...
-// }
+//
+//	struct {
+//	  Public sdkLibraryScopeProperties
+//	  System sdkLibraryScopeProperties
+//	  ...
+//	}
 var allScopeStructType = createAllScopePropertiesStructType()
 
 // Dynamically create a structure type for each apiscope in allApiScopes.
@@ -2556,9 +2557,7 @@
 	return requiredFilesFromPrebuiltApexForImport(name)
 }
 
-//
 // java_sdk_library_xml
-//
 type sdkLibraryXml struct {
 	android.ModuleBase
 	android.DefaultableModuleBase
diff --git a/java/sdk_library_external.go b/java/sdk_library_external.go
index 0acaa13..4f83981 100644
--- a/java/sdk_library_external.go
+++ b/java/sdk_library_external.go
@@ -49,9 +49,10 @@
 
 // Get partition group of java module that can be used at inter-partition dependency check.
 // We currently have three groups
-//   (system, system_ext) => system partition group
-//   (vendor, odm) => vendor partition group
-//   (product) => product partition group
+//
+//	(system, system_ext) => system partition group
+//	(vendor, odm) => vendor partition group
+//	(product) => product partition group
 func (j *Module) partitionGroup(ctx android.EarlyModuleContext) partitionGroup {
 	// system and system_ext partition can be treated as the same in terms of inter-partition dependency.
 	if j.Platform() || j.SystemExtSpecific() {
diff --git a/mk2rbc/mk2rbc.go b/mk2rbc/mk2rbc.go
index 2707f0c..aa48e63 100644
--- a/mk2rbc/mk2rbc.go
+++ b/mk2rbc/mk2rbc.go
@@ -14,13 +14,13 @@
 
 // Convert makefile containing device configuration to Starlark file
 // The conversion can handle the following constructs in a makefile:
-//   * comments
-//   * simple variable assignments
-//   * $(call init-product,<file>)
-//   * $(call inherit-product-if-exists
-//   * if directives
-// All other constructs are carried over to the output starlark file as comments.
+//   - comments
+//   - simple variable assignments
+//   - $(call init-product,<file>)
+//   - $(call inherit-product-if-exists
+//   - if directives
 //
+// All other constructs are carried over to the output starlark file as comments.
 package mk2rbc
 
 import (
diff --git a/mk2rbc/soong_variables.go b/mk2rbc/soong_variables.go
index de46925..a52ec4f 100644
--- a/mk2rbc/soong_variables.go
+++ b/mk2rbc/soong_variables.go
@@ -32,8 +32,8 @@
 
 // Scans the makefile Soong uses to generate soong.variables file,
 // collecting variable names and types from the lines that look like this:
-//    $(call add_json_XXX,  <...>,             $(VAR))
 //
+//	$(call add_json_XXX,  <...>,             $(VAR))
 func FindSoongVariables(mkFile string, includeFileScope mkparser.Scope, registrar variableRegistrar) error {
 	ctx := context{includeFileScope, registrar}
 	return ctx.doFind(mkFile)
diff --git a/python/python.go b/python/python.go
index eb0d3ca..8364169 100644
--- a/python/python.go
+++ b/python/python.go
@@ -438,9 +438,9 @@
 }
 
 // DepsMutator mutates dependencies for this module:
-//  * handles proto dependencies,
-//  * if required, specifies launcher and adds launcher dependencies,
-//  * applies python version mutations to Python dependencies
+//   - handles proto dependencies,
+//   - if required, specifies launcher and adds launcher dependencies,
+//   - applies python version mutations to Python dependencies
 func (p *Module) DepsMutator(ctx android.BottomUpMutatorContext) {
 	android.ProtoDeps(ctx, &p.protoProperties)
 
diff --git a/scripts/build_broken_logs.go b/scripts/build_broken_logs.go
index 82ba749..bb4b9fd 100644
--- a/scripts/build_broken_logs.go
+++ b/scripts/build_broken_logs.go
@@ -19,12 +19,12 @@
 // To use, download the logs.zip from one or more branches, and extract them
 // into subdirectories of the current directory. So for example, I have:
 //
-//   ./aosp-master/aosp_arm/std_full.log
-//   ./aosp-master/aosp_arm64/std_full.log
-//   ./aosp-master/...
-//   ./internal-master/aosp_arm/std_full.log
-//   ./internal-master/aosp_arm64/std_full.log
-//   ./internal-master/...
+//	./aosp-master/aosp_arm/std_full.log
+//	./aosp-master/aosp_arm64/std_full.log
+//	./aosp-master/...
+//	./internal-master/aosp_arm/std_full.log
+//	./internal-master/aosp_arm64/std_full.log
+//	./internal-master/...
 //
 // Then I use `go run path/to/build_broken_logs.go *`
 package main
diff --git a/sdk/build_release.go b/sdk/build_release.go
index 0494a28..20b33d6 100644
--- a/sdk/build_release.go
+++ b/sdk/build_release.go
@@ -369,7 +369,9 @@
 // structure which are not supported by the specified target build release.
 //
 // A property is pruned if its field has a tag of the form:
-//     `supported_build_releases:"<build-release-set>"`
+//
+//	`supported_build_releases:"<build-release-set>"`
+//
 // and the resulting build release set does not contain the target build release. Properties that
 // have no such tag are assumed to be supported by all releases.
 func newPropertyPrunerByBuildRelease(propertiesStruct interface{}, targetBuildRelease *buildRelease) *propertyPruner {
diff --git a/sdk/member_trait.go b/sdk/member_trait.go
index 4229ca8..0843306 100644
--- a/sdk/member_trait.go
+++ b/sdk/member_trait.go
@@ -68,7 +68,6 @@
 // A list of sdkMemberTraitListProperty instances is created, one per member trait that provides:
 // * a reference to the member trait.
 // * a getter for the corresponding field in the properties struct.
-//
 func createDynamicSdkMemberTraits(sdkMemberTraits []android.SdkMemberTrait) *dynamicSdkMemberTraits {
 
 	var listProperties []*sdkMemberTraitListProperty
diff --git a/sdk/member_type.go b/sdk/member_type.go
index 10669fe..98f5982 100644
--- a/sdk/member_type.go
+++ b/sdk/member_type.go
@@ -80,7 +80,6 @@
 // * a reference to the member type.
 // * a getter for the corresponding field in the properties struct.
 // * a dependency tag that identifies the member type of a resolved dependency.
-//
 func createDynamicSdkMemberTypes(sdkMemberTypes []android.SdkMemberType) *dynamicSdkMemberTypes {
 
 	var listProperties []*sdkMemberTypeListProperty
diff --git a/shared/env.go b/shared/env.go
index 152729b..b7d3baf 100644
--- a/shared/env.go
+++ b/shared/env.go
@@ -32,10 +32,11 @@
 //
 // e.g. OUT_DIR = "out"
 // is converted to:
-// {
-//     "Key": "OUT_DIR",
-//     "Value": "out",
-// },
+//
+//	{
+//	    "Key": "OUT_DIR",
+//	    "Value": "out",
+//	},
 func EnvFileContents(envDeps map[string]string) ([]byte, error) {
 	contents := make(envFileData, 0, len(envDeps))
 	for key, value := range envDeps {
diff --git a/snapshot/recovery_snapshot.go b/snapshot/recovery_snapshot.go
index f1e31ca..ac002be 100644
--- a/snapshot/recovery_snapshot.go
+++ b/snapshot/recovery_snapshot.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/snapshot/snapshot.go b/snapshot/snapshot.go
index 294f8b6..206ecc9 100644
--- a/snapshot/snapshot.go
+++ b/snapshot/snapshot.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/snapshot/snapshot_base.go b/snapshot/snapshot_base.go
index 4a14f2e..8e5dfe4 100644
--- a/snapshot/snapshot_base.go
+++ b/snapshot/snapshot_base.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/snapshot/util.go b/snapshot/util.go
index f447052..806ac90 100644
--- a/snapshot/util.go
+++ b/snapshot/util.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/snapshot/vendor_snapshot.go b/snapshot/vendor_snapshot.go
index 9bd26c2..8f7b8c2 100644
--- a/snapshot/vendor_snapshot.go
+++ b/snapshot/vendor_snapshot.go
@@ -4,7 +4,7 @@
 // you may not use this file except in compliance with the License.
 // You may obtain a copy of the License at
 //
-//      http://www.apache.org/licenses/LICENSE-2.0
+//	http://www.apache.org/licenses/LICENSE-2.0
 //
 // Unless required by applicable law or agreed to in writing, software
 // distributed under the License is distributed on an "AS IS" BASIS,
diff --git a/third_party/zip/reader_test.go b/third_party/zip/reader_test.go
index 11c6d6e..5f97f5c 100644
--- a/third_party/zip/reader_test.go
+++ b/third_party/zip/reader_test.go
@@ -615,7 +615,6 @@
 //
 // It's here in hex for the same reason as rZipBytes above: to avoid
 // problems with on-disk virus scanners or other zip processors.
-//
 func biggestZipBytes() []byte {
 	s := `
 0000000 50 4b 03 04 14 00 08 00 08 00 00 00 00 00 00 00
diff --git a/ui/signal/signal.go b/ui/signal/signal.go
index 4929a7b..552545d 100644
--- a/ui/signal/signal.go
+++ b/ui/signal/signal.go
@@ -31,13 +31,12 @@
 // same time we do. Most of the time this means we just need to ignore the signal and we'll
 // just see errors from all of our subprocesses. But in case that fails, when we get a signal:
 //
-//   1. Wait two seconds to exit normally.
-//   2. Call cancel() which is normally the cancellation of a Context. This will send a SIGKILL
-//      to any subprocesses attached to that context.
-//   3. Wait two seconds to exit normally.
-//   4. Call cleanup() to close the log/trace buffers, then panic.
-//   5. If another two seconds passes (if cleanup got stuck, etc), then panic.
-//
+//  1. Wait two seconds to exit normally.
+//  2. Call cancel() which is normally the cancellation of a Context. This will send a SIGKILL
+//     to any subprocesses attached to that context.
+//  3. Wait two seconds to exit normally.
+//  4. Call cleanup() to close the log/trace buffers, then panic.
+//  5. If another two seconds passes (if cleanup got stuck, etc), then panic.
 func SetupSignals(log logger.Logger, cancel, cleanup func()) {
 	signals := make(chan os.Signal, 5)
 	signal.Notify(signals, os.Interrupt, syscall.SIGHUP, syscall.SIGQUIT, syscall.SIGTERM)