diff --git a/tests/run_integration_tests.sh b/tests/run_integration_tests.sh
index e1aa70c..a762952 100755
--- a/tests/run_integration_tests.sh
+++ b/tests/run_integration_tests.sh
@@ -20,5 +20,3 @@
 "$TOP/build/soong/tests/apex_cc_module_arch_variant_tests.sh"
 "$TOP/build/soong/tests/apex_cc_module_arch_variant_tests.sh" "aosp_arm" "armv7-a"
 "$TOP/build/soong/tests/apex_cc_module_arch_variant_tests.sh" "aosp_cf_arm64_phone" "armv8-a" "cortex-a53"
-
-"$TOP/build/soong/tests/sbom_test.sh"
diff --git a/tests/sbom_test.sh b/tests/sbom_test.sh
deleted file mode 100755
index 28ce9d8..0000000
--- a/tests/sbom_test.sh
+++ /dev/null
@@ -1,202 +0,0 @@
-#!/bin/bash
-
-# Copyright (C) 2023 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-set -uo pipefail
-
-# Integration test for verifying generated SBOM for cuttlefish device.
-
-if [ ! -e "build/make/core/Makefile" ]; then
-  echo "$0 must be run from the top of the Android source tree."
-  exit 1
-fi
-
-tmp_dir="$(mktemp -d tmp.XXXXXX)"
-function cleanup {
-  rm -rf "${tmp_dir}"
-}
-trap cleanup EXIT
-
-out_dir=$tmp_dir
-droid_target=droid
-
-debug=false
-if [ $debug = "true" ]; then
-  out_dir=out
-  droid_target=
-fi
-# m droid
-TARGET_PRODUCT="aosp_cf_x86_64_phone" TARGET_BUILD_VARIANT=userdebug OUT_DIR=$out_dir \
-  build/soong/soong_ui.bash --make-mode $droid_target dump.erofs sbom
-
-# Generate installed file list from .img files in PRODUCT_OUT
-dump_erofs=$out_dir/host/linux-x86/bin/dump.erofs
-product_out=$out_dir/target/product/vsoc_x86_64
-
-declare -A diff_excludes
-diff_excludes[odm]="-I /odm/lib/modules"
-diff_excludes[vendor]=\
-"-I /vendor/lib64/libkeystore2_crypto.so \
- -I /vendor/lib/modules \
- -I /vendor/odm"
-diff_excludes[system]=\
-"-I /acct/ \
- -I /adb_keys \
- -I /apex/ \
- -I /bin \
- -I /bugreports \
- -I /cache \
- -I /config/ \
- -I /d \
- -I /data/ \
- -I /data_mirror/ \
- -I /debug_ramdisk/ \
- -I /dev/ \
- -I /etc \
- -I /init \
- -I /init.environ.rc \
- -I /linkerconfig/ \
- -I /metadata/ \
- -I /mnt/ \
- -I /odm/app \
- -I /odm/bin \
- -I /odm_dlkm/etc \
- -I /odm/etc \
- -I /odm/firmware \
- -I /odm/framework \
- -I /odm/lib \
- -I /odm/lib64 \
- -I /odm/overlay \
- -I /odm/priv-app \
- -I /odm/usr \
- -I /oem/ \
- -I /postinstall/ \
- -I /proc/ \
- -I /product/ \
- -I /sdcard \
- -I /second_stage_resources/ \
- -I /storage/ \
- -I /sys/ \
- -I /system_dlkm/ \
- -I /system_ext/ \
- -I /system/lib64/android.hardware.confirmationui@1.0.so \
- -I /system/lib64/android.hardware.confirmationui-V1-ndk.so \
- -I /system/lib64/android.hardware.keymaster@4.1.so \
- -I /system/lib64/android.hardware.security.rkp-V3-ndk.so \
- -I /system/lib64/android.hardware.security.sharedsecret-V1-ndk.so \
- -I /system/lib64/android.security.compat-ndk.so \
- -I /system/lib64/libkeymaster4_1support.so \
- -I /system/lib64/libkeymint.so \
- -I /system/lib64/libkeystore2_aaid.so \
- -I /system/lib64/libkeystore2_apc_compat.so \
- -I /system/lib64/libkeystore2_crypto.so \
- -I /system/lib64/libkm_compat_service.so \
- -I /system/lib64/libkm_compat.so \
- -I /system/lib64/vndk-29 \
- -I /system/lib64/vndk-sp-29 \
- -I /system/lib/modules \
- -I /system/lib/vndk-29 \
- -I /system/lib/vndk-sp-29 \
- -I /system/product \
- -I /system/system_ext \
- -I /system/usr/icu \
- -I /system/vendor \
- -I /vendor/ \
- -I /vendor_dlkm/etc"
-
-# Example output of dump.erofs is as below, and the data used in the test start
-# at line 11. Column 1 is inode id, column 2 is inode type and column 3 is name.
-# Each line is captured in variable "entry", sed is used to trim the leading
-# spaces and cut is used to get field 1 every time. Once a field is extracted,
-# "cut --complement" is used to remove the extracted field so next field can be
-# processed in the same way and to be processed field is always field 1.
-# Output of dump.erofs:
-#     File : /
-#     Size: 160  On-disk size: 160  directory
-#     NID: 39   Links: 10   Layout: 2   Compression ratio: 100.00%
-#     Inode size: 64   Extent size: 0   Xattr size: 16
-#     Uid: 0   Gid: 0  Access: 0755/rwxr-xr-x
-#     Timestamp: 2023-02-14 01:15:54.000000000
-#
-#            NID TYPE  FILENAME
-#             39    2  .
-#             39    2  ..
-#             47    2  app
-#        1286748    2  bin
-#        1286754    2  etc
-#        5304814    2  lib
-#        5309056    2  lib64
-#        5309130    2  media
-#        5388910    2  overlay
-#        5479537    2  priv-app
-EROFS_IMAGES="\
-  $product_out/product.img \
-  $product_out/system.img \
-  $product_out/system_ext.img \
-  $product_out/system_dlkm.img \
-  $product_out/system_other.img \
-  $product_out/odm.img \
-  $product_out/odm_dlkm.img \
-  $product_out/vendor.img \
-  $product_out/vendor_dlkm.img"
-for f in $EROFS_IMAGES; do
-  partition_name=$(basename $f | cut -d. -f1)
-  file_list_file="${product_out}/sbom-${partition_name}-files.txt"
-  files_in_spdx_file="${product_out}/sbom-${partition_name}-files-in-spdx.txt"
-  rm "$file_list_file" > /dev/null 2>&1
-  all_dirs="/"
-  while [ ! -z "$all_dirs" ]; do
-    dir=$(echo "$all_dirs" | cut -d ' ' -f1)
-    all_dirs=$(echo "$all_dirs" | cut -d ' ' -f1 --complement -s)
-    entries=$($dump_erofs --ls --path "$dir" $f | tail -n +11)
-    while read -r entry; do
-      nid=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1)
-      entry=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1 --complement)
-      type=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1)
-      entry=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1 --complement)
-      name=$(echo $entry | sed 's/^\s*//' | cut -d ' ' -f1)
-      case $type in
-        "2")  # directory
-          all_dirs=$(echo "$all_dirs $dir/$name" | sed 's/^\s*//')
-          ;;
-        *)
-          (
-          if [ "$partition_name" != "system" ]; then
-            # system partition is mounted to /, not to prepend partition name.
-            printf %s "/$partition_name"
-          fi
-          echo "$dir/$name" | sed 's#^//#/#'
-          ) >> "$file_list_file"
-          ;;
-      esac
-    done <<< "$entries"
-  done
-  sort -n -o "$file_list_file" "$file_list_file"
-
-  # Diff
-  echo ============ Diffing files in $f and SBOM
-  grep "FileName: /${partition_name}/" $product_out/sbom.spdx | sed 's/^FileName: //' | sort -n > "$files_in_spdx_file"
-  exclude=
-  if [ -v 'diff_excludes[$partition_name]' ]; then
-    exclude=${diff_excludes[$partition_name]}
-  fi
-  diff "$file_list_file" "$files_in_spdx_file" $exclude
-  if [ $? != "0" ]; then
-    echo Found diffs in $f and SBOM.
-    exit 1
-  else
-    echo No diffs.
-  fi
-done
\ No newline at end of file