blob: 86d77bb4495b74fcdd30cce3f8b848aa58c0bcf6 [file] [log] [blame]
The Android Open Source Project88b60792009-03-03 19:28:42 -08001#
2# Copyright (C) 2008 The Android Open Source Project
3#
4# Licensed under the Apache License, Version 2.0 (the "License");
5# you may not use this file except in compliance with the License.
6# You may obtain a copy of the License at
7#
8# http://www.apache.org/licenses/LICENSE-2.0
9#
10# Unless required by applicable law or agreed to in writing, software
11# distributed under the License is distributed on an "AS IS" BASIS,
12# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13# See the License for the specific language governing permissions and
14# limitations under the License.
15#
16
17#
18# Handle various build version information.
19#
20# Guarantees that the following are defined:
21# PLATFORM_VERSION
22# PLATFORM_SDK_VERSION
Dianne Hackborn9bd54042009-05-15 18:01:20 -070023# PLATFORM_VERSION_CODENAME
24# DEFAULT_APP_TARGET_SDK
The Android Open Source Project88b60792009-03-03 19:28:42 -080025# BUILD_ID
26# BUILD_NUMBER
Dan Willemsenccc933e2015-08-11 15:25:12 -070027# BUILD_DATETIME
Adam Seaton8d4fac72016-07-29 11:52:35 -070028# PLATFORM_SECURITY_PATCH
The Android Open Source Project88b60792009-03-03 19:28:42 -080029#
30
31# Look for an optional file containing overrides of the defaults,
32# but don't cry if we don't find it. We could just use -include, but
33# the build.prop target also wants INTERNAL_BUILD_ID_MAKEFILE to be set
34# if the file exists.
35#
36INTERNAL_BUILD_ID_MAKEFILE := $(wildcard $(BUILD_SYSTEM)/build_id.mk)
37ifneq "" "$(INTERNAL_BUILD_ID_MAKEFILE)"
38 include $(INTERNAL_BUILD_ID_MAKEFILE)
39endif
40
Colin Crossd3183bd2017-02-16 16:41:26 -080041# Returns all words in $1 up to and including $2
42define find_and_earlier
43 $(strip $(if $(1),
44 $(firstword $(1))
45 $(if $(filter $(firstword $(1)),$(2)),,
46 $(call find_and_earlier,$(wordlist 2,$(words $(1)),$(1)),$(2)))))
47endef
48
49#$(warning $(call find_and_earlier,A B C,A))
50#$(warning $(call find_and_earlier,A B C,B))
51#$(warning $(call find_and_earlier,A B C,C))
52#$(warning $(call find_and_earlier,A B C,D))
53
54define version-list
55$(1) $(1)DR1 $(1)DR2 $(1)MR1 $(1)MR2
56endef
57
58ALL_VERSIONS := O P
59ALL_VERSIONS := $(foreach v,$(ALL_VERSIONS),$(call version-list,$(v)))
60
61ifeq (,$(TARGET_PLATFORM_VERSION))
62 # Default targeted platform version
63 # TODO: PLATFORM_VERSION, PLATFORM_SDK_VERSION, etc. should be conditional
64 # on this
65 TARGET_PLATFORM_VERSION := O
66endif
67
68ifeq (,$(filter $(ALL_VERSIONS), $(TARGET_PLATFORM_VERSION)))
69$(warning Invalid TARGET_PLATFORM_VERSION '$(TARGET_PLATFORM_VERSION)', must be one of)
70$(warning $(ALL_VERSIONS))
71$(error Stopping...)
72endif
73
74ENABLED_VERSIONS := $(call find_and_earlier,$(ALL_VERSIONS),$(TARGET_PLATFORM_VERSION))
75
76$(foreach v,$(ENABLED_VERSIONS), \
77 $(eval IS_AT_LEAST_$(v) := true))
78
The Android Open Source Project88b60792009-03-03 19:28:42 -080079ifeq "" "$(PLATFORM_VERSION)"
80 # This is the canonical definition of the platform version,
81 # which is the version that we reveal to the end user.
82 # Update this value when the platform version changes (rather
83 # than overriding it somewhere else). Can be an arbitrary string.
Akshay Thakkerd6340942016-09-30 12:44:58 -070084 PLATFORM_VERSION := 7.1.1
The Android Open Source Project88b60792009-03-03 19:28:42 -080085endif
86
87ifeq "" "$(PLATFORM_SDK_VERSION)"
88 # This is the canonical definition of the SDK version, which defines
Dianne Hackborn95378842009-05-08 12:06:17 -070089 # the set of APIs and functionality available in the platform. It
90 # is a single integer that increases monotonically as updates to
91 # the SDK are released. It should only be incremented when the APIs for
92 # the new release are frozen (so that developers don't write apps against
93 # intermediate builds). During development, this number remains at the
94 # SDK version the branch is based on and PLATFORM_VERSION_CODENAME holds
95 # the code-name of the new development work.
Michael Wrightbcdc8802016-06-29 15:33:37 +010096 PLATFORM_SDK_VERSION := 25
The Android Open Source Project88b60792009-03-03 19:28:42 -080097endif
98
Yohann Roussel740ec8f2016-03-09 17:19:58 +010099ifeq "" "$(PLATFORM_JACK_MIN_SDK_VERSION)"
100 # This is definition of the min SDK version given to Jack for the current
101 # platform. For released version it should be the same as
102 # PLATFORM_SDK_VERSION. During development, this number may be incremented
103 # before PLATFORM_SDK_VERSION if the plateform starts to add new java
104 # language supports.
Yohann Roussel5360e012016-11-18 19:30:28 +0100105 PLATFORM_JACK_MIN_SDK_VERSION := o-b1
Yohann Roussel740ec8f2016-03-09 17:19:58 +0100106endif
107
Dianne Hackborn95378842009-05-08 12:06:17 -0700108ifeq "" "$(PLATFORM_VERSION_CODENAME)"
109 # This is the current development code-name, if the build is not a final
110 # release build. If this is a final release build, it is simply "REL".
Ian Pedowitzd0528b42016-08-08 12:45:03 -0700111 PLATFORM_VERSION_CODENAME := REL
Dianne Hackborn6ee3c432014-04-24 16:19:14 -0700112
113 # This is all of the development codenames that are active. Should be either
114 # the same as PLATFORM_VERSION_CODENAME or a comma-separated list of additional
115 # codenames after PLATFORM_VERSION_CODENAME.
Ian Pedowitz3b546832016-07-05 18:25:14 +0000116 PLATFORM_VERSION_ALL_CODENAMES := $(PLATFORM_VERSION_CODENAME)
Dianne Hackborn95378842009-05-08 12:06:17 -0700117endif
118
Adam Powellbdd5e8e2015-05-21 13:49:05 -0700119ifeq "REL" "$(PLATFORM_VERSION_CODENAME)"
120 PLATFORM_PREVIEW_SDK_VERSION := 0
121else
122 ifeq "" "$(PLATFORM_PREVIEW_SDK_VERSION)"
123 # This is the definition of a preview SDK version over and above the current
124 # platform SDK version. Unlike the platform SDK version, a higher value
125 # for preview SDK version does NOT mean that all prior preview APIs are
126 # included. Packages reading this value to determine compatibility with
127 # known APIs should check that this value is precisely equal to the preview
128 # SDK version the package was built for, otherwise it should fall back to
129 # assuming the device can only support APIs as of the previous official
130 # public release.
131 # This value will always be 0 for release builds.
Ian Pedowitzd0528b42016-08-08 12:45:03 -0700132 PLATFORM_PREVIEW_SDK_VERSION := 0
Adam Powellbdd5e8e2015-05-21 13:49:05 -0700133 endif
134endif
135
Dianne Hackborn9bd54042009-05-15 18:01:20 -0700136ifeq "" "$(DEFAULT_APP_TARGET_SDK)"
137 # This is the default minSdkVersion and targetSdkVersion to use for
138 # all .apks created by the build system. It can be overridden by explicitly
139 # setting these in the .apk's AndroidManifest.xml. It is either the code
140 # name of the development build or, if this is a release build, the official
141 # SDK version of this release.
142 ifeq "REL" "$(PLATFORM_VERSION_CODENAME)"
143 DEFAULT_APP_TARGET_SDK := $(PLATFORM_SDK_VERSION)
144 else
145 DEFAULT_APP_TARGET_SDK := $(PLATFORM_VERSION_CODENAME)
146 endif
147endif
148
Dianne Hackborne593e5c2015-08-12 16:11:20 -0700149ifeq "" "$(PLATFORM_SECURITY_PATCH)"
Adam Seatonc63e4292016-08-25 19:46:06 -0700150 # Used to indicate the security patch that has been applied to the device.
151 # It must signify that the build includes all security patches issued up through the designated Android Public Security Bulletin.
152 # It must be of the form "YYYY-MM-DD" on production devices.
153 # It must match one of the Android Security Patch Level strings of the Public Security Bulletins.
154 # If there is no $PLATFORM_SECURITY_PATCH set, keep it empty.
Adam Seaton00213262016-09-20 15:48:41 -0700155 PLATFORM_SECURITY_PATCH := 2016-11-05
Dianne Hackborne593e5c2015-08-12 16:11:20 -0700156endif
157
158ifeq "" "$(PLATFORM_BASE_OS)"
159 # Used to indicate the base os applied to the device.
160 # Can be an arbitrary string, but must be a single word.
161 #
162 # If there is no $PLATFORM_BASE_OS set, keep it empty.
163 PLATFORM_BASE_OS :=
164endif
165
The Android Open Source Project88b60792009-03-03 19:28:42 -0800166ifeq "" "$(BUILD_ID)"
167 # Used to signify special builds. E.g., branches and/or releases,
168 # like "M5-RC7". Can be an arbitrary string, but must be a single
169 # word and a valid file name.
170 #
171 # If there is no BUILD_ID set, make it obvious.
172 BUILD_ID := UNKNOWN
173endif
174
Dan Willemsenccc933e2015-08-11 15:25:12 -0700175ifeq "" "$(BUILD_DATETIME)"
176 # Used to reproduce builds by setting the same time. Must be the number
177 # of seconds since the Epoch.
178 BUILD_DATETIME := $(shell date +%s)
179endif
180
181ifneq (,$(findstring Darwin,$(shell uname -sm)))
182DATE := date -r $(BUILD_DATETIME)
183else
184DATE := date -d @$(BUILD_DATETIME)
185endif
186
The Android Open Source Project88b60792009-03-03 19:28:42 -0800187ifeq "" "$(BUILD_NUMBER)"
188 # BUILD_NUMBER should be set to the source control value that
189 # represents the current state of the source code. E.g., a
190 # perforce changelist number or a git hash. Can be an arbitrary string
191 # (to allow for source control that uses something other than numbers),
192 # but must be a single word and a valid file name.
193 #
194 # If no BUILD_NUMBER is set, create a useful "I am an engineering build
195 # from this date/time" value. Make it start with a non-digit so that
196 # anyone trying to parse it as an integer will probably get "0".
weiqiaoc9219c22015-12-15 15:57:22 +0800197 BUILD_NUMBER := eng.$(shell echo $${USER:0:6}).$(shell $(DATE) +%Y%m%d.%H%M%S)
The Android Open Source Project88b60792009-03-03 19:28:42 -0800198endif