diff --git a/.gitignore b/.gitignore
index c9b568f..f1f4a52 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,2 +1,5 @@
 *.pyc
 *.swp
+blueprint/
+kati/
+soong/
diff --git a/core/LINUX_KERNEL_COPYING b/core/LINUX_KERNEL_COPYING
new file mode 100644
index 0000000..ca442d3
--- /dev/null
+++ b/core/LINUX_KERNEL_COPYING
@@ -0,0 +1,356 @@
+
+   NOTE! This copyright does *not* cover user programs that use kernel
+ services by normal system calls - this is merely considered normal use
+ of the kernel, and does *not* fall under the heading of "derived work".
+ Also note that the GPL below is copyrighted by the Free Software
+ Foundation, but the instance of code that it refers to (the Linux
+ kernel) is copyrighted by me and others who actually wrote it.
+
+ Also note that the only valid version of the GPL as far as the kernel
+ is concerned is _this_ particular version of the license (ie v2, not
+ v2.2 or v3.x or whatever), unless explicitly otherwise stated.
+
+			Linus Torvalds
+
+----------------------------------------
+
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+                       51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/core/Makefile b/core/Makefile
index 8de935c..1c3e74d 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -80,9 +80,9 @@
 	$(hide) echo "#" >> $@; \
 	        echo "# BOOTIMAGE_BUILD_PROPERTIES" >> $@; \
 	        echo "#" >> $@;
-	$(hide) echo ro.bootimage.build.date=`date`>>$@
-	$(hide) echo ro.bootimage.build.date.utc=`date +%s`>>$@
-	$(hide) echo ro.bootimage.build.fingerprint="$(BUILD_FINGERPRINT)">>$@
+	$(hide) echo ro.bootimage.build.date=`$(DATE_FROM_FILE)`>>$@
+	$(hide) echo ro.bootimage.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@
+	$(hide) echo ro.bootimage.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@
 	$(hide) build/tools/post_process_props.py $@
 
 # -----------------------------------------------------------------
@@ -114,7 +114,7 @@
 BUILD_VERSION_TAGS := $(subst $(space),$(comma),$(sort $(BUILD_VERSION_TAGS)))
 
 # A human-readable string that descibes this build in detail.
-build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER) $(BUILD_VERSION_TAGS)
+build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER_FROM_FILE) $(BUILD_VERSION_TAGS)
 $(intermediate_system_build_prop): PRIVATE_BUILD_DESC := $(build_desc)
 
 # The string used to uniquely identify the combined build and product; used by the OTA server.
@@ -122,7 +122,7 @@
   ifneq ($(filter eng.%,$(BUILD_NUMBER)),)
     # Trim down BUILD_FINGERPRINT: the default BUILD_NUMBER makes it easily exceed
     # the Android system property length limit (PROPERTY_VALUE_MAX=92).
-    BF_BUILD_NUMBER := $(USER)$(shell date +%m%d%H%M)
+    BF_BUILD_NUMBER := $(USER)$(shell $(DATE) +%m%d%H%M)
   else
     BF_BUILD_NUMBER := $(BUILD_NUMBER)
   endif
@@ -132,6 +132,9 @@
   $(error BUILD_FINGERPRINT cannot contain spaces: "$(BUILD_FINGERPRINT)")
 endif
 
+$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_FINGERPRINT) > $(PRODUCT_OUT)/build_fingerprint.txt)
+BUILD_FINGERPRINT_FROM_FILE := $$(cat $(PRODUCT_OUT)/build_fingerprint.txt)
+
 # The string used to uniquely identify the system build; used by the OTA server.
 # This purposefully excludes any product-specific variables.
 ifeq (,$(strip $(BUILD_THUMBPRINT)))
@@ -155,7 +158,7 @@
 
   # Dev. branches should have DISPLAY_BUILD_NUMBER set
   ifeq "true" "$(DISPLAY_BUILD_NUMBER)"
-    BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER) $(BUILD_KEYS)
+    BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER_FROM_FILE) $(BUILD_KEYS)
   else
     BUILD_DISPLAY_ID := $(BUILD_ID) $(BUILD_KEYS)
   endif
@@ -174,6 +177,12 @@
 
 BUILDINFO_SH := build/tools/buildinfo.sh
 
+# TARGET_BUILD_FLAVOR and ro.build.flavor are used only by the test harness to distinguish builds.
+TARGET_BUILD_FLAVOR := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)
+ifdef SANITIZE_TARGET
+TARGET_BUILD_FLAVOR := $(TARGET_BUILD_FLAVOR)_asan
+endif
+
 ifdef TARGET_SYSTEM_PROP
 system_prop_file := $(TARGET_SYSTEM_PROP)
 else
@@ -191,7 +200,7 @@
 		echo "import /oem/oem.prop $(prop)" >> $@;)
 endif
 	$(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
-			TARGET_BUILD_FLAVOR="$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)" \
+			TARGET_BUILD_FLAVOR="$(TARGET_BUILD_FLAVOR)" \
 			TARGET_DEVICE="$(TARGET_DEVICE)" \
 			PRODUCT_NAME="$(TARGET_PRODUCT)" \
 			PRODUCT_BRAND="$(PRODUCT_BRAND)" \
@@ -202,7 +211,8 @@
 			PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \
 			BUILD_ID="$(BUILD_ID)" \
 			BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \
-			BUILD_NUMBER="$(BUILD_NUMBER)" \
+			DATE="$(DATE_FROM_FILE)" \
+			BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \
 			BOARD_BUILD_SYSTEM_ROOT_IMAGE="$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)" \
 			AB_OTA_UPDATER="$(AB_OTA_UPDATER)" \
 			PLATFORM_VERSION="$(PLATFORM_VERSION)" \
@@ -214,7 +224,7 @@
 			PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \
 			BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
 			TARGET_BOOTLOADER_BOARD_NAME="$(TARGET_BOOTLOADER_BOARD_NAME)" \
-			BUILD_FINGERPRINT="$(BUILD_FINGERPRINT)" \
+			BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \
 			$(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT)") \
 			TARGET_BOARD_PLATFORM="$(TARGET_BOARD_PLATFORM)" \
 			TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \
@@ -268,9 +278,9 @@
 	@echo Target vendor buildinfo: $@
 	@mkdir -p $(dir $@)
 	$(hide) echo > $@
-	$(hide) echo ro.vendor.build.date=`date`>>$@
-	$(hide) echo ro.vendor.build.date.utc=`date +%s`>>$@
-	$(hide) echo ro.vendor.build.fingerprint="$(BUILD_FINGERPRINT)">>$@
+	$(hide) echo ro.vendor.build.date=`$(DATE_FROM_FILE)`>>$@
+	$(hide) echo ro.vendor.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@
+	$(hide) echo ro.vendor.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@
 endif
 
 # ----------------------------------------------------------------
@@ -311,7 +321,12 @@
 	@echo Package stats: $@
 	@mkdir -p $(dir $@)
 	$(hide) rm -f $@
+ifeq ($(PACKAGES_TO_STAT),)
+# Create empty package stats file if target builds no jar(s) or apk(s).
+	$(hide) touch $@
+else
 	$(hide) build/tools/dump-package-stats $^ > $@
+endif
 
 .PHONY: package-stats
 package-stats: $(PACKAGE_STATS_FILE)
@@ -650,7 +665,7 @@
 # make the target NOTICE files depend on this particular file too, which will
 # then be in the right directory for the find in combine-notice-files to work.
 $(kernel_notice_file): \
-	    prebuilts/qemu-kernel/arm/LINUX_KERNEL_COPYING \
+	    $(BUILD_SYSTEM)/LINUX_KERNEL_COPYING \
 	    | $(ACP)
 	@echo Copying: $@
 	$(hide) mkdir -p $(dir $@)
@@ -665,10 +680,11 @@
 # before the rules that use that variable to build the image.
 ALL_DEFAULT_INSTALLED_MODULES += $(TARGET_OUT_ETC)/security/otacerts.zip
 $(TARGET_OUT_ETC)/security/otacerts.zip: KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR)
-$(TARGET_OUT_ETC)/security/otacerts.zip: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR))
+$(TARGET_OUT_ETC)/security/otacerts.zip: $(addsuffix .x509.pem,$(DEFAULT_KEY_CERT_PAIR)) | $(ZIPTIME)
 	$(hide) rm -f $@
 	$(hide) mkdir -p $(dir $@)
-	$(hide) zip -qj $@ $<
+	$(hide) zip -qjX $@ $<
+	$(remove-timestamps-from-package)
 
 .PHONY: otacerts
 otacerts: $(TARGET_OUT_ETC)/security/otacerts.zip
@@ -717,17 +733,16 @@
 INTERNAL_USERIMAGES_DEPS += $(MAKE_SQUASHFS) $(MKSQUASHFSUSERIMG) $(IMG2SIMG)
 endif
 
-ifeq ($(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),squashfs)
-INTERNAL_USERIMAGES_DEPS += $(MAKE_SQUASHFS) $(MKSQUASHFSUSERIMG) $(IMG2SIMG)
-endif
-
 INTERNAL_USERIMAGES_BINARY_PATHS := $(sort $(dir $(INTERNAL_USERIMAGES_DEPS)))
 
 ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY))
 INTERNAL_USERIMAGES_DEPS += $(BUILD_VERITY_TREE) $(APPEND2SIMG) $(VERITY_SIGNER)
+ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC))
+INTERNAL_USERIMAGES_DEPS += $(FEC)
+endif
 endif
 
-SELINUX_FC := $(TARGET_ROOT_OUT)/file_contexts
+SELINUX_FC := $(TARGET_ROOT_OUT)/file_contexts.bin
 INTERNAL_USERIMAGES_DEPS += $(SELINUX_FC)
 
 # $(1): the path of the output dictionary file
@@ -754,7 +769,8 @@
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER),$(hide) echo "boot_signer=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_BOOT_SIGNER)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_key=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VERITY_SIGNING_KEY)" >> $(1))
-$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(VERITY_SIGNER)" >> $(1))
+$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY),$(hide) echo "verity_signer_cmd=$(notdir $(VERITY_SIGNER))" >> $(1))
+$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC),$(hide) echo "verity_fec=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VERITY_FEC)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION),$(hide) echo "system_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SYSTEM_VERITY_PARTITION)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION),$(hide) echo "vendor_verity_block_device=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_VERITY_PARTITION)" >> $(1))
 $(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT),$(hide) echo "vboot=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT)" >> $(1))
@@ -810,9 +826,11 @@
 recovery_font := $(call include-path-for, recovery)/fonts/12x22.png
 endif
 
-recovery_resources_private := $(strip $(wildcard $(TARGET_DEVICE_DIR)/recovery/res))
+ifndef TARGET_PRIVATE_RES_DIRS
+TARGET_PRIVATE_RES_DIRS := $(wildcard $(TARGET_DEVICE_DIR)/recovery/res)
+endif
 recovery_resource_deps := $(shell find $(recovery_resources_common) \
-  $(recovery_resources_private) -type f)
+  $(TARGET_PRIVATE_RES_DIRS) -type f)
 ifdef TARGET_RECOVERY_FSTAB
 recovery_fstab := $(TARGET_RECOVERY_FSTAB)
 else
@@ -828,7 +846,7 @@
 RECOVERY_RESOURCE_ZIP :=
 endif
 
-ifeq ($(recovery_resources_private),)
+ifeq ($(TARGET_PRIVATE_RES_DIRS),)
   $(info No private recovery resources for TARGET_DEVICE $(TARGET_DEVICE))
 endif
 
@@ -889,8 +907,8 @@
   $(hide) rm -rf $(TARGET_RECOVERY_ROOT_OUT)/res/*
   $(hide) cp -rf $(recovery_resources_common)/* $(TARGET_RECOVERY_ROOT_OUT)/res
   $(hide) cp -f $(recovery_font) $(TARGET_RECOVERY_ROOT_OUT)/res/images/font.png
-  $(hide) $(foreach item,$(recovery_resources_private), \
-    cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/)
+  $(hide) $(foreach item,$(TARGET_PRIVATE_RES_DIRS), \
+    cp -rf $(item) $(TARGET_RECOVERY_ROOT_OUT)/$(newline))
   $(hide) $(foreach item,$(recovery_fstab), \
     cp -f $(item) $(TARGET_RECOVERY_ROOT_OUT)/etc/recovery.fstab)
   $(hide) cp $(RECOVERY_INSTALL_OTA_KEYS) $(TARGET_RECOVERY_ROOT_OUT)/res/keys
@@ -924,9 +942,10 @@
 		$(call build-recoveryimage-target, $@)
 
 ifneq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true)
-$(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET)
+$(RECOVERY_RESOURCE_ZIP): $(INSTALLED_RECOVERYIMAGE_TARGET) | $(ZIPTIME)
 	$(hide) mkdir -p $(dir $@)
-	$(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrj $@ -@
+	$(hide) find $(TARGET_RECOVERY_ROOT_OUT)/res -type f | sort | zip -0qrjX $@ -@
+	$(remove-timestamps-from-package)
 endif
 
 .PHONY: recoveryimage-nodeps
@@ -934,8 +953,7 @@
 	@echo "make $@: ignoring dependencies"
 	$(call build-recoveryimage-target, $(INSTALLED_RECOVERYIMAGE_TARGET))
 
-else # ! ifeq (,$(filter true, $(TARGET_NO_KERNEL) $(TARGET_NO_RECOVERY)))
-INSTALLED_RECOVERYIMAGE_TARGET :=
+else # INSTALLED_RECOVERYIMAGE_TARGET not defined
 RECOVERY_RESOURCE_ZIP :=
 endif
 
@@ -1118,19 +1136,19 @@
 $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_SYSTEMIMAGE_FILES)
 	$(call pretty,"Platform zip package: $(INSTALLED_PLATFORM_ZIP)")
 	$(hide) rm -f $@
-	$(hide) cd $(dir $@) && zip -qry $(notdir $@) \
+	$(hide) cd $(dir $@) && zip -qryX $(notdir $@) \
 		$(TARGET_COPY_OUT_SYSTEM) \
 		$(patsubst $(PRODUCT_OUT)/%, %, $(TARGET_OUT_NOTICE_FILES)) \
 		$(addprefix symbols/,$(PDK_SYMBOL_FILES_LIST))
 ifdef BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE
-	$(hide) cd $(dir $@) && zip -qry $(notdir $@) \
+	$(hide) cd $(dir $@) && zip -qryX $(notdir $@) \
 		$(TARGET_COPY_OUT_VENDOR)
 endif
 ifneq ($(PDK_PLATFORM_JAVA_ZIP_CONTENTS),)
-	$(hide) cd $(OUT_DIR) && zip -qry $(patsubst $(OUT_DIR)/%,%,$@) $(PDK_PLATFORM_JAVA_ZIP_CONTENTS)
+	$(hide) cd $(OUT_DIR) && zip -qryX $(patsubst $(OUT_DIR)/%,%,$@) $(PDK_PLATFORM_JAVA_ZIP_CONTENTS)
 endif
 ifneq ($(PDK_PLATFORM_ZIP_PRODUCT_BINARIES),)
-	$(hide) zip -qry $@ $(PDK_PLATFORM_ZIP_PRODUCT_BINARIES)
+	$(hide) zip -qryX $@ $(PDK_PLATFORM_ZIP_PRODUCT_BINARIES)
 endif
 
 .PHONY: platform
@@ -1279,6 +1297,13 @@
 # platform.zip depends on $(INTERNAL_VENDORIMAGE_FILES).
 $(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_VENDORIMAGE_FILES)
 
+INSTALLED_FILES_FILE_VENDOR := $(PRODUCT_OUT)/installed-files-vendor.txt
+$(INSTALLED_FILES_FILE_VENDOR) : $(INTERNAL_VENDORIMAGE_FILES)
+	@echo Installed file list: $@
+	@mkdir -p $(dir $@)
+	@rm -f $@
+	$(hide) build/tools/fileslist.py $(TARGET_OUT_VENDOR) > $@
+
 vendorimage_intermediates := \
     $(call intermediates-dir-for,PACKAGING,vendor)
 BUILT_VENDORIMAGE_TARGET := $(PRODUCT_OUT)/vendor.img
@@ -1296,7 +1321,7 @@
 
 # We just build this directly to the install location.
 INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET)
-$(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES)
+$(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES) $(INSTALLED_FILES_FILE_VENDOR)
 	$(build-vendorimage-target)
 
 .PHONY: vendorimage-nodeps
@@ -1314,7 +1339,32 @@
 # -----------------------------------------------------------------
 # host tools needed to build dist and OTA packages
 
-DISTTOOLS :=  $(HOST_OUT_EXECUTABLES)/minigzip \
+build_ota_package := true
+ifeq ($(TARGET_SKIP_OTA_PACKAGE),true)
+build_ota_package := false
+endif
+ifeq ($(BUILD_OS),darwin)
+build_ota_package := false
+endif
+ifneq ($(strip $(SANITIZE_TARGET)),)
+build_ota_package := false
+endif
+ifeq ($(TARGET_PRODUCT),sdk)
+build_ota_package := false
+endif
+ifneq ($(filter generic%,$(TARGET_DEVICE)),)
+build_ota_package := false
+endif
+ifeq ($(TARGET_NO_KERNEL),true)
+build_ota_package := false
+endif
+ifeq ($(recovery_fstab),)
+build_ota_package := false
+endif
+
+ifeq ($(build_ota_package),true)
+OTATOOLS :=  $(HOST_OUT_EXECUTABLES)/minigzip \
+  $(HOST_OUT_EXECUTABLES)/aapt \
   $(HOST_OUT_EXECUTABLES)/mkbootfs \
   $(HOST_OUT_EXECUTABLES)/mkbootimg \
   $(HOST_OUT_EXECUTABLES)/fs_config \
@@ -1332,15 +1382,18 @@
   $(HOST_OUT_EXECUTABLES)/verity_signer \
   $(HOST_OUT_EXECUTABLES)/append2simg \
   $(HOST_OUT_EXECUTABLES)/img2simg \
-  $(HOST_OUT_EXECUTABLES)/boot_signer
+  $(HOST_OUT_EXECUTABLES)/boot_signer \
+  $(HOST_OUT_EXECUTABLES)/fec
 
 # Shared libraries.
-DISTTOOLS += \
+OTATOOLS += \
   $(HOST_LIBRARY_PATH)/libc++$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/liblog$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libcutils$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libselinux$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libcrypto-host$(HOST_SHLIB_SUFFIX) \
+  $(HOST_LIBRARY_PATH)/libdivsufsort$(HOST_SHLIB_SUFFIX) \
+  $(HOST_LIBRARY_PATH)/libdivsufsort64$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libext2fs_host$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libext2_blkid_host$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libext2_com_err_host$(HOST_SHLIB_SUFFIX) \
@@ -1349,9 +1402,6 @@
   $(HOST_LIBRARY_PATH)/libext2_quota_host$(HOST_SHLIB_SUFFIX) \
   $(HOST_LIBRARY_PATH)/libext2_uuid_host$(HOST_SHLIB_SUFFIX)
 
-OTATOOLS := $(DISTTOOLS) \
-  $(HOST_OUT_EXECUTABLES)/aapt
-
 .PHONY: otatools
 otatools: $(OTATOOLS)
 
@@ -1361,17 +1411,20 @@
 $(BUILT_OTATOOLS_PACKAGE): $(OTATOOLS) | $(ACP)
 	@echo "Package OTA tools: $@"
 	$(hide) rm -rf $@ $(zip_root)
-	$(hide) mkdir -p $(dir $@) $(zip_root)/bin $(zip_root)/framework $(zip_root)/releasetools
+	$(hide) mkdir -p $(dir $@) $(zip_root)/bin $(zip_root)/framework $(zip_root)/releasetools $(zip_root)/system/extras/verity
 	$(call copy-files-with-structure,$(OTATOOLS),$(HOST_OUT)/,$(zip_root))
+	$(hide) $(ACP) $(HOST_OUT_JAVA_LIBRARIES)/VeritySigner.jar $(zip_root)/framework/
+	$(hide) $(ACP) -p system/extras/verity/build_verity_metadata.py $(zip_root)/system/extras/verity/
 	$(hide) $(ACP) -r -d -p build/tools/releasetools/* $(zip_root)/releasetools
 	$(hide) rm -rf $@ $(zip_root)/releasetools/*.pyc
-	$(hide) (cd $(zip_root) && zip -qry $(abspath $@) *)
-	$(hide) zip -qry $(abspath $@) build/target/product/security/
-	$(hide) find device vendor -name \*.pk8 -o -name \*.x509.pem -o -name oem.prop | xargs zip -qry $(abspath $@)>/dev/null || true
+	$(hide) (cd $(zip_root) && zip -qryX $(abspath $@) *)
+	$(hide) zip -qryX $(abspath $@) build/target/product/security/
+	$(hide) find device vendor -name \*.pk8 -o -name \*.x509.pem -o -name oem.prop | xargs zip -qryX $(abspath $@)>/dev/null || true
 
 .PHONY: otatools-package
 otatools-package: $(BUILT_OTATOOLS_PACKAGE)
 
+endif # build_ota_package
 
 # -----------------------------------------------------------------
 # A zip of the directories that map to the target filesystem.
@@ -1401,11 +1454,16 @@
 endef
 
 built_ota_tools := \
-	$(call intermediates-dir-for,EXECUTABLES,applypatch,,,$(TARGET_PREFER_32_BIT))/applypatch \
-	$(call intermediates-dir-for,EXECUTABLES,applypatch_static,,,$(TARGET_PREFER_32_BIT))/applypatch_static \
-	$(call intermediates-dir-for,EXECUTABLES,check_prereq,,,$(TARGET_PREFER_32_BIT))/check_prereq \
-	$(call intermediates-dir-for,EXECUTABLES,sqlite3,,,$(TARGET_PREFER_32_BIT))/sqlite3 \
-	$(call intermediates-dir-for,EXECUTABLES,updater,,,$(TARGET_PREFER_32_BIT))/updater
+    $(call intermediates-dir-for,EXECUTABLES,applypatch,,,$(TARGET_PREFER_32_BIT))/applypatch \
+    $(call intermediates-dir-for,EXECUTABLES,sqlite3,,,$(TARGET_PREFER_32_BIT))/sqlite3
+
+# We can't build static executables when SANITIZE_TARGET=address
+ifeq ($(strip $(SANITIZE_TARGET)),)
+built_ota_tools += \
+    $(call intermediates-dir-for,EXECUTABLES,applypatch_static,,,$(TARGET_PREFER_32_BIT))/applypatch_static \
+    $(call intermediates-dir-for,EXECUTABLES,updater,,,$(TARGET_PREFER_32_BIT))/updater
+endif
+
 $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools)
 
 $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_API_VERSION := $(RECOVERY_API_VERSION)
@@ -1418,6 +1476,11 @@
 $(BUILT_TARGET_FILES_PACKAGE): tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS)
 endif
 
+# Build OTA tools if not using the AB Updater.
+ifneq ($(AB_OTA_UPDATER),true)
+$(BUILT_TARGET_FILES_PACKAGE): $(built_ota_tools)
+endif
+
 # Depending on the various images guarantees that the underlying
 # directories are up-to-date.
 $(BUILT_TARGET_FILES_PACKAGE): \
@@ -1430,7 +1493,6 @@
 		$(INSTALLED_VENDORIMAGE_TARGET) \
 		$(INSTALLED_ANDROID_INFO_TXT_TARGET) \
 		$(SELINUX_FC) \
-		$(built_ota_tools) \
 		$(APKCERTS_FILE) \
 		$(HOST_OUT_EXECUTABLES)/fs_config \
 		| $(ACP)
@@ -1500,16 +1562,19 @@
 		$(TARGET_OUT_VENDOR),$(zip_root)/VENDOR)
 endif
 	@# Extra contents of the OTA package
-	$(hide) mkdir -p $(zip_root)/OTA/bin
+	$(hide) mkdir -p $(zip_root)/OTA
 	$(hide) $(ACP) $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(zip_root)/OTA/
+ifneq ($(AB_OTA_UPDATER),true)
+	$(hide) mkdir -p $(zip_root)/OTA/bin
 	$(hide) $(ACP) $(PRIVATE_OTA_TOOLS) $(zip_root)/OTA/bin/
+endif
 	@# Files that do not end up in any images, but are necessary to
 	@# build them.
 	$(hide) mkdir -p $(zip_root)/META
 	$(hide) $(ACP) $(APKCERTS_FILE) $(zip_root)/META/apkcerts.txt
 	$(hide) if test -e $(tool_extensions)/releasetools.py; then $(ACP) $(tool_extensions)/releasetools.py $(zip_root)/META/; fi
 	$(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt
-	$(hide) $(ACP) $(SELINUX_FC) $(zip_root)/META/file_contexts
+	$(hide) $(ACP) $(SELINUX_FC) $(zip_root)/META/file_contexts.bin
 	$(hide) echo "recovery_api_version=$(PRIVATE_RECOVERY_API_VERSION)" > $(zip_root)/META/misc_info.txt
 	$(hide) echo "fstab_version=$(PRIVATE_RECOVERY_FSTAB_VERSION)" >> $(zip_root)/META/misc_info.txt
 ifdef BOARD_FLASH_BLOCK_SIZE
@@ -1542,11 +1607,15 @@
 	$(hide) echo "use_set_metadata=1" >> $(zip_root)/META/misc_info.txt
 	$(hide) echo "multistage_support=1" >> $(zip_root)/META/misc_info.txt
 	$(hide) echo "update_rename_support=1" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "blockimgdiff_versions=1,2,3" >> $(zip_root)/META/misc_info.txt
+	$(hide) echo "blockimgdiff_versions=1,2,3,4" >> $(zip_root)/META/misc_info.txt
 ifneq ($(OEM_THUMBPRINT_PROPERTIES),)
 	# OTA scripts are only interested in fingerprint related properties
 	$(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $(zip_root)/META/misc_info.txt
 endif
+ifneq ($(strip $(SANITIZE_TARGET)),)
+	# We need to create userdata.img with real data because the instrumented libraries are in userdata.img.
+	$(hide) echo "userdata_img_with_data=true" >> $(zip_root)/META/misc_info.txt
+endif
 ifeq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true)
 	$(hide) echo "full_recovery_image=true" >> $(zip_root)/META/misc_info.txt
 endif
@@ -1561,24 +1630,37 @@
 	$(hide) for part in $(AB_OTA_PARTITIONS); do \
 	  echo "$${part}" >> $(zip_root)/META/ab_partitions.txt; \
 	done
+	$(hide) for conf in $(AB_OTA_POSTINSTALL_CONFIG); do \
+	  echo "$${conf}" >> $(zip_root)/META/postinstall_config.txt; \
+	done
+	@# Include the build type in META/misc_info.txt so the server can easily differentiate production builds.
+	$(hide) echo "build_type=$(TARGET_BUILD_VARIANT)" >> $(zip_root)/META/misc_info.txt
+ifdef OSRELEASED_DIRECTORY
+	$(hide) $(ACP) $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/product_id $(zip_root)/META/product_id.txt
+	$(hide) $(ACP) $(TARGET_OUT_ETC)/$(OSRELEASED_DIRECTORY)/product_version $(zip_root)/META/product_version.txt
+endif
+endif
+ifeq ($(BREAKPAD_GENERATE_SYMBOLS),true)
+	@# If breakpad symbols have been generated, add them to the zip.
+	$(hide) $(ACP) -r $(TARGET_OUT_BREAKPAD) $(zip_root)/BREAKPAD
 endif
 	@# Zip everything up, preserving symlinks
-	$(hide) (cd $(zip_root) && zip -qry ../$(notdir $@) .)
+	$(hide) (cd $(zip_root) && zip -qryX ../$(notdir $@) .)
 	@# Run fs_config on all the system, vendor, boot ramdisk,
 	@# and recovery ramdisk files in the zip, and save the output
 	$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="SYSTEM/" } /^SYSTEM\// {print "system/" $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) > $(zip_root)/META/filesystem_config.txt
 	$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="VENDOR/" } /^VENDOR\// {print "vendor/" $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) > $(zip_root)/META/vendor_filesystem_config.txt
 ifeq ($(BOARD_BUILD_SYSTEM_ROOT_IMAGE),true)
-	$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="ROOT/" } /^ROOT\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT)-S $(SELINUX_FC) > $(zip_root)/META/root_filesystem_config.txt
+	$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="ROOT/" } /^ROOT\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) > $(zip_root)/META/root_filesystem_config.txt
 else
 	$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="BOOT/RAMDISK/" } /^BOOT\/RAMDISK\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) > $(zip_root)/META/boot_filesystem_config.txt
 endif
 ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
 	$(hide) zipinfo -1 $@ | awk 'BEGIN { FS="RECOVERY/RAMDISK/" } /^RECOVERY\/RAMDISK\// {print $$2}' | $(HOST_OUT_EXECUTABLES)/fs_config -C -D $(TARGET_OUT) -S $(SELINUX_FC) > $(zip_root)/META/recovery_filesystem_config.txt
 endif
-	$(hide) (cd $(zip_root) && zip -q ../$(notdir $@) META/*filesystem_config.txt)
+	$(hide) (cd $(zip_root) && zip -qX ../$(notdir $@) META/*filesystem_config.txt)
 	$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \
-	    ./build/tools/releasetools/add_img_to_target_files -p $(HOST_OUT) $@
+	    ./build/tools/releasetools/add_img_to_target_files -v -p $(HOST_OUT) $@
 
 .PHONY: target-files-package
 target-files-package: $(BUILT_TARGET_FILES_PACKAGE)
@@ -1587,11 +1669,7 @@
 $(call dist-for-goals, target-files-package, $(BUILT_TARGET_FILES_PACKAGE))
 endif
 
-ifneq ($(TARGET_PRODUCT),sdk)
-ifeq ($(filter generic%,$(TARGET_DEVICE)),)
-ifneq ($(TARGET_NO_KERNEL),true)
-ifneq ($(recovery_fstab),)
-
+ifeq ($(build_ota_package),true)
 # -----------------------------------------------------------------
 # OTA update package
 
@@ -1605,7 +1683,7 @@
 
 $(INTERNAL_OTA_PACKAGE_TARGET): KEY_CERT_PAIR := $(DEFAULT_KEY_CERT_PAIR)
 
-$(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(DISTTOOLS)
+$(INTERNAL_OTA_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE)
 	@echo "Package OTA: $@"
 	$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \
 	   ./build/tools/releasetools/ota_from_target_files -v \
@@ -1618,10 +1696,7 @@
 .PHONY: otapackage
 otapackage: $(INTERNAL_OTA_PACKAGE_TARGET)
 
-endif    # recovery_fstab is defined
-endif    # TARGET_NO_KERNEL != true
-endif    # TARGET_DEVICE != generic*
-endif    # TARGET_PRODUCT != sdk
+endif    # build_ota_package
 
 # -----------------------------------------------------------------
 # The update package
@@ -1634,7 +1709,7 @@
 
 INTERNAL_UPDATE_PACKAGE_TARGET := $(PRODUCT_OUT)/$(name).zip
 
-$(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE) $(DISTTOOLS)
+$(INTERNAL_UPDATE_PACKAGE_TARGET): $(BUILT_TARGET_FILES_PACKAGE)
 	@echo "Package: $@"
 	$(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$$PATH MKBOOTIMG=$(MKBOOTIMG) \
 	   ./build/tools/releasetools/img_from_target_files -v \
@@ -1663,7 +1738,7 @@
 	@echo "Package symbols: $@"
 	$(hide) rm -rf $@
 	$(hide) mkdir -p $(dir $@) $(TARGET_OUT_UNSTRIPPED)
-	$(hide) zip -qr $@ $(TARGET_OUT_UNSTRIPPED)
+	$(hide) zip -qrX $@ $(TARGET_OUT_UNSTRIPPED)
 
 # -----------------------------------------------------------------
 # A zip of the Android Apps. Not keeping full path so that we don't
@@ -1680,8 +1755,13 @@
 	@echo "Package apps: $@"
 	$(hide) rm -rf $@
 	$(hide) mkdir -p $(dir $@)
-	$(hide) zip -qj $@ $(TARGET_OUT_APPS)/*/*.apk $(TARGET_OUT_APPS_PRIVILEGED)/*/*.apk
-
+	$(hide) apps_to_zip=`find $(TARGET_OUT_APPS) $(TARGET_OUT_APPS_PRIVILEGED) -mindepth 2 -maxdepth 3 -name "*.apk"`; \
+	if [ -z "$$apps_to_zip" ]; then \
+		echo "No apps to zip up. Generating empty apps archive." ; \
+		a=$$(mktemp /tmp/XXXXXXX) && touch $$a && zip $@ $$a && zip -d $@ $$a; \
+	else \
+		zip -qjX $@ $$apps_to_zip; \
+	fi
 
 #------------------------------------------------------------------
 # A zip of emma code coverage meta files. Generated for fully emma
@@ -1693,7 +1773,7 @@
 $(EMMA_META_ZIP) :
 	@echo "Collecting Emma coverage meta files."
 	$(hide) find $(TARGET_COMMON_OUT_ROOT) $(HOST_COMMON_OUT_ROOT) -name "coverage.em" | \
-		zip -@ -q $@
+		zip -@ -qX $@
 
 endif # EMMA_INSTRUMENT=true
 
@@ -1709,7 +1789,7 @@
 	$(hide) dict_files=`find $(TARGET_OUT_COMMON_INTERMEDIATES)/APPS -name proguard_dictionary`; \
 		if [ -n "$$dict_files" ]; then \
 		  unobfuscated_jars=$${dict_files//proguard_dictionary/classes.jar}; \
-		  zip -q $@ $$dict_files $$unobfuscated_jars; \
+		  zip -qX $@ $$dict_files $$unobfuscated_jars; \
 		else \
 		  touch $(dir $@)/zipdummy; \
 		  (cd $(dir $@) && zip -q $(notdir $@) zipdummy); \
@@ -1740,7 +1820,7 @@
 
 $(INTERNAL_EMULATOR_PACKAGE_TARGET): $(INTERNAL_EMULATOR_PACKAGE_FILES)
 	@echo "Package: $@"
-	$(hide) zip -qj $@ $(INTERNAL_EMULATOR_PACKAGE_FILES)
+	$(hide) zip -qjX $@ $(INTERNAL_EMULATOR_PACKAGE_FILES)
 
 endif
 # -----------------------------------------------------------------
@@ -1875,7 +1955,7 @@
 		HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \
 			development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \
 		chmod -R ug+rwX $(PRIVATE_DIR) && \
-		cd $(dir $@) && zip -rq $(notdir $@) $(PRIVATE_NAME) \
+		cd $(dir $@) && zip -rqX $(notdir $@) $(PRIVATE_NAME) \
 	) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 )
 
 
@@ -1910,11 +1990,15 @@
 include $(sort $(wildcard $(BUILD_SYSTEM)/tasks/*.mk))
 -include $(sort $(wildcard vendor/*/build/tasks/*.mk))
 -include $(sort $(wildcard device/*/build/tasks/*.mk))
+-include $(sort $(wildcard product/*/build/tasks/*.mk))
 # Also the project-specific tasks
 -include $(sort $(wildcard vendor/*/*/build/tasks/*.mk))
 -include $(sort $(wildcard device/*/*/build/tasks/*.mk))
+-include $(sort $(wildcard product/*/*/build/tasks/*.mk))
 endif
 
+include $(BUILD_SYSTEM)/product-graph.mk
+
 # -----------------------------------------------------------------
 # Create SDK repository packages. Must be done after tasks/* since
 # we need the addon rules defined.
diff --git a/core/base_rules.mk b/core/base_rules.mk
index ea64cc6..42dfc1b 100644
--- a/core/base_rules.mk
+++ b/core/base_rules.mk
@@ -34,14 +34,37 @@
   ifneq ($(LOCAL_IS_HOST_MODULE),true)
     $(error $(LOCAL_PATH): LOCAL_IS_HOST_MODULE must be "true" or empty, not "$(LOCAL_IS_HOST_MODULE)")
   endif
-  my_prefix := HOST_
+  ifeq ($(LOCAL_HOST_PREFIX),)
+    my_prefix := HOST_
+  else
+    my_prefix := $(LOCAL_HOST_PREFIX)
+  endif
   my_host := host-
 else
   my_prefix := TARGET_
   my_host :=
 endif
 
+ifeq ($(my_prefix),HOST_CROSS_)
+  my_host_cross := true
+else
+  my_host_cross :=
+endif
+
 my_module_tags := $(LOCAL_MODULE_TAGS)
+ifeq ($(my_host_cross),true)
+  my_module_tags :=
+endif
+
+ifdef BUILDING_WITH_NINJA
+# Ninja has an implicit dependency on the command being run, and kati will
+# regenerate the ninja manifest if any read makefile changes, so there is no
+# need to have dependencies on makefiles.
+# This won't catch all the cases where LOCAL_ADDITIONAL_DEPENDENCIES contains
+# a .mk file, because a few users of LOCAL_ADDITIONAL_DEPENDENCIES don't include
+# base_rules.mk, but it will fix the most common ones.
+LOCAL_ADDITIONAL_DEPENDENCIES := $(filter-out %.mk,$(LOCAL_ADDITIONAL_DEPENDENCIES))
+endif
 
 ###########################################################
 ## Validate and define fallbacks for input LOCAL_* variables.
@@ -150,15 +173,18 @@
 my_register_name := $(LOCAL_MODULE)$($(my_prefix)2ND_ARCH_MODULE_SUFFIX)
 endif
 endif
+ifeq ($(my_host_cross),true)
+  my_register_name := host_cross_$(LOCAL_MODULE)
+endif
 # Make sure that this IS_HOST/CLASS/MODULE combination is unique.
 module_id := MODULE.$(if \
-    $(LOCAL_IS_HOST_MODULE),HOST,TARGET).$(LOCAL_MODULE_CLASS).$(my_register_name)
+    $(LOCAL_IS_HOST_MODULE),$($(my_prefix)OS),TARGET).$(LOCAL_MODULE_CLASS).$(my_register_name)
 ifdef $(module_id)
 $(error $(LOCAL_PATH): $(module_id) already defined by $($(module_id)))
 endif
 $(module_id) := $(LOCAL_PATH)
 
-intermediates := $(call local-intermediates-dir,,$(LOCAL_2ND_ARCH_VAR_PREFIX))
+intermediates := $(call local-intermediates-dir,,$(LOCAL_2ND_ARCH_VAR_PREFIX),$(my_host_cross))
 intermediates.COMMON := $(call local-intermediates-dir,COMMON)
 generated_sources_dir := $(call local-generated-sources-dir)
 
@@ -194,297 +220,46 @@
 # Assemble the list of targets to create PRIVATE_ variables for.
 LOCAL_INTERMEDIATE_TARGETS += $(LOCAL_BUILT_MODULE)
 
-
 ###########################################################
-## AIDL: Compile .aidl files to .java
+## Create .toc files from shared objects to reduce unnecessary rebuild
+# .toc files have the list of external dynamic symbols without their addresses.
+# For ninja build, .toc files will be updated only when the content of .toc
+# files are changed. As .KATI_RESTAT is specified to .toc files, dependent
+# binaries of a .toc file will be rebuilt only when the content of
+# the .toc file is changed.
 ###########################################################
-
-aidl_sources := $(filter %.aidl,$(LOCAL_SRC_FILES))
-
-ifneq ($(strip $(aidl_sources)),)
-
-aidl_java_sources := $(patsubst %.aidl,%.java,$(addprefix $(intermediates.COMMON)/src/, $(aidl_sources)))
-aidl_sources := $(addprefix $(TOP_DIR)$(LOCAL_PATH)/, $(aidl_sources))
-
-aidl_preprocess_import :=
-LOCAL_SDK_VERSION:=$(strip $(LOCAL_SDK_VERSION))
-ifdef LOCAL_SDK_VERSION
-ifneq ($(filter current system_current, $(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS)),)
-  # LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS
-  aidl_preprocess_import := $(TARGET_OUT_COMMON_INTERMEDIATES)/framework.aidl
+ifeq ($(LOCAL_MODULE_CLASS),SHARED_LIBRARIES)
+LOCAL_INTERMEDIATE_TARGETS += $(LOCAL_BUILT_MODULE).toc
+$(LOCAL_BUILT_MODULE).toc: $(LOCAL_BUILT_MODULE)
+ifeq ($(BUILDING_WITH_NINJA),true)
+	$(call $(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)transform-shared-lib-to-toc,$<,$@.tmp)
+	$(hide) if cmp -s $@.tmp $@ ; then \
+		  rm $@.tmp ; \
+		else \
+		  mv $@.tmp $@ ; \
+		fi
 else
-  aidl_preprocess_import := $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_VERSION)/framework.aidl
-endif # not current or system_current
-else
-# build against the platform.
-LOCAL_AIDL_INCLUDES += $(FRAMEWORKS_BASE_JAVA_SRC_DIRS)
-endif # LOCAL_SDK_VERSION
-$(aidl_java_sources): PRIVATE_AIDL_FLAGS := -b $(addprefix -p,$(aidl_preprocess_import)) -I$(LOCAL_PATH) -I$(LOCAL_PATH)/src $(addprefix -I,$(LOCAL_AIDL_INCLUDES))
+	@# make doesn't support restat. We always update .toc files so the dependents will always be updated too.
+	$(call $(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)transform-shared-lib-to-toc,$<,$@)
+endif
 
-$(aidl_java_sources): $(intermediates.COMMON)/src/%.java: \
-        $(TOPDIR)$(LOCAL_PATH)/%.aidl \
-        $(LOCAL_MODULE_MAKEFILE) \
-        $(LOCAL_ADDITIONAL_DEPENDENCIES) \
-        $(AIDL) \
-        $(aidl_preprocess_import)
-	$(transform-aidl-to-java)
--include $(aidl_java_sources:%.java=%.P)
-
-else
-aidl_java_sources :=
+# Kati adds restat=1 to ninja. GNU make does nothing for this.
+.KATI_RESTAT: $(LOCAL_BUILT_MODULE).toc
 endif
 
 ###########################################################
-## logtags: Add .logtags files to global list, emit java source
+## logtags: Add .logtags files to global list
 ###########################################################
 
 logtags_sources := $(filter %.logtags,$(LOCAL_SRC_FILES))
 
 ifneq ($(strip $(logtags_sources)),)
-
 event_log_tags := $(addprefix $(LOCAL_PATH)/,$(logtags_sources))
-
-# Emit a java source file with constants for the tags, if
-# LOCAL_MODULE_CLASS is "APPS" or "JAVA_LIBRARIES".
-ifneq ($(filter $(LOCAL_MODULE_CLASS),APPS JAVA_LIBRARIES),)
-
-logtags_java_sources := $(patsubst %.logtags,%.java,$(addprefix $(intermediates.COMMON)/src/, $(logtags_sources)))
-logtags_sources := $(addprefix $(TOP_DIR)$(LOCAL_PATH)/, $(logtags_sources))
-
-$(logtags_java_sources): $(intermediates.COMMON)/src/%.java: $(TOPDIR)$(LOCAL_PATH)/%.logtags $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt
-	$(transform-logtags-to-java)
-
-endif
-
 else
-logtags_java_sources :=
 event_log_tags :=
 endif
 
 ###########################################################
-## .proto files: Compile proto files to .java
-###########################################################
-proto_sources := $(filter %.proto,$(LOCAL_SRC_FILES))
-# Because names of the .java files compiled from .proto files are unknown until the
-# .proto files are compiled, we use a timestamp file as depedency.
-proto_java_sources_file_stamp :=
-ifneq ($(proto_sources),)
-proto_sources_fullpath := $(addprefix $(TOP_DIR)$(LOCAL_PATH)/, $(proto_sources))
-# By putting the generated java files into $(LOCAL_INTERMEDIATE_SOURCE_DIR), they will be
-# automatically found by the java compiling function transform-java-to-classes.jar.
-ifneq ($(LOCAL_INTERMEDIATE_SOURCE_DIR),)
-proto_java_intemediate_dir := $(LOCAL_INTERMEDIATE_SOURCE_DIR)/proto
-else
-# LOCAL_INTERMEDIATE_SOURCE_DIR may be not defined in non-java modules.
-proto_java_intemediate_dir := $(intermediates)/proto
-endif
-proto_java_sources_file_stamp := $(proto_java_intemediate_dir)/Proto.stamp
-proto_java_sources_dir := $(proto_java_intemediate_dir)/src
-
-$(proto_java_sources_file_stamp): PRIVATE_PROTO_INCLUDES := $(TOP)
-$(proto_java_sources_file_stamp): PRIVATE_PROTO_SRC_FILES := $(proto_sources_fullpath)
-$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_DIR := $(proto_java_sources_dir)
-ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),micro)
-$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --javamicro_out
-else
-  ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),nano)
-$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --javanano_out
-  else
-$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --java_out
-  endif
-endif
-$(proto_java_sources_file_stamp): PRIVATE_PROTOC_FLAGS := $(LOCAL_PROTOC_FLAGS)
-$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_PARAMS := $(LOCAL_PROTO_JAVA_OUTPUT_PARAMS)
-$(proto_java_sources_file_stamp) : $(proto_sources_fullpath) $(PROTOC)
-	$(call transform-proto-to-java)
-
-#TODO: protoc should output the dependencies introduced by imports.
-
-LOCAL_INTERMEDIATE_TARGETS += $(proto_java_sources_file_stamp)
-endif # proto_sources
-
-
-###########################################################
-## Java: Compile .java files to .class
-###########################################################
-#TODO: pull this into java.make once host and target are combined
-
-java_sources := $(addprefix $(TOP_DIR)$(LOCAL_PATH)/, $(filter %.java,$(LOCAL_SRC_FILES))) $(aidl_java_sources) $(logtags_java_sources) \
-                $(filter %.java,$(LOCAL_GENERATED_SOURCES))
-all_java_sources := $(java_sources) $(addprefix $($(my_prefix)OUT_COMMON_INTERMEDIATES)/, $(filter %.java,$(LOCAL_INTERMEDIATE_SOURCES)))
-
-## Java resources #########################################
-
-# Look for resource files in any specified directories.
-# Non-java and non-doc files will be picked up as resources
-# and included in the output jar file.
-java_resource_file_groups :=
-
-LOCAL_JAVA_RESOURCE_DIRS := $(strip $(LOCAL_JAVA_RESOURCE_DIRS))
-ifneq ($(LOCAL_JAVA_RESOURCE_DIRS),)
-  # This makes a list of words like
-  #     <dir1>::<file1>:<file2> <dir2>::<file1> <dir3>:
-  # where each of the files is relative to the directory it's grouped with.
-  # Directories that don't contain any resource files will result in groups
-  # that end with a colon, and they are stripped out in the next step.
-  java_resource_file_groups += \
-    $(foreach dir,$(LOCAL_JAVA_RESOURCE_DIRS), \
-	$(subst $(space),:,$(strip \
-		$(TOP_DIR)$(LOCAL_PATH)/$(dir): \
-	    $(patsubst ./%,%,$(shell cd $(TOP_DIR)$(LOCAL_PATH)/$(dir) && \
-		find . \
-		    -type d -a -name ".svn" -prune -o \
-		    -type f \
-			-a \! -name "*.java" \
-			-a \! -name "package.html" \
-			-a \! -name "overview.html" \
-			-a \! -name ".*.swp" \
-			-a \! -name ".DS_Store" \
-			-a \! -name "*~" \
-			-print \
-		    )) \
-	)) \
-    )
-  java_resource_file_groups := $(filter-out %:,$(java_resource_file_groups))
-endif # LOCAL_JAVA_RESOURCE_DIRS
-
-LOCAL_JAVA_RESOURCE_FILES := $(strip $(LOCAL_JAVA_RESOURCE_FILES))
-ifneq ($(LOCAL_JAVA_RESOURCE_FILES),)
-  java_resource_file_groups += \
-    $(foreach f,$(LOCAL_JAVA_RESOURCE_FILES), \
-	$(patsubst %/,%,$(dir $(f)))::$(notdir $(f)) \
-     )
-endif # LOCAL_JAVA_RESOURCE_FILES
-
-ifdef java_resource_file_groups
-  # The full paths to all resources, used for dependencies.
-  java_resource_sources := \
-    $(foreach group,$(java_resource_file_groups), \
-	$(addprefix $(word 1,$(subst :,$(space),$(group)))/, \
-	    $(wordlist 2,9999,$(subst :,$(space),$(group))) \
-	) \
-    )
-  # The arguments to jar that will include these files in a jar file.
-  # Quote the file name to handle special characters (such as #) correctly.
-  extra_jar_args := \
-    $(foreach group,$(java_resource_file_groups), \
-	$(addprefix -C "$(word 1,$(subst :,$(space),$(group)))" , \
-	    $(foreach w, $(wordlist 2,9999,$(subst :,$(space),$(group))), "$(w)" ) \
-	) \
-    )
-  java_resource_file_groups :=
-else
-  java_resource_sources :=
-  extra_jar_args :=
-endif # java_resource_file_groups
-
-## PRIVATE java vars ######################################
-# LOCAL_SOURCE_FILES_ALL_GENERATED is set only if the module does not have static source files,
-# but generated source files in its LOCAL_INTERMEDIATE_SOURCE_DIR.
-# You have to set up the dependency in some other way.
-need_compile_java := $(strip $(all_java_sources)$(all_res_assets)$(java_resource_sources))$(LOCAL_STATIC_JAVA_LIBRARIES)$(filter true,$(LOCAL_SOURCE_FILES_ALL_GENERATED))
-ifdef need_compile_java
-
-full_static_java_libs := \
-    $(foreach lib,$(LOCAL_STATIC_JAVA_LIBRARIES), \
-      $(call intermediates-dir-for, \
-        JAVA_LIBRARIES,$(lib),$(LOCAL_IS_HOST_MODULE),COMMON)/javalib.jar)
-
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_INSTALL_DIR := $(dir $(LOCAL_INSTALLED_MODULE))
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CLASS_INTERMEDIATES_DIR := $(intermediates)/classes
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_SOURCE_INTERMEDIATES_DIR := $(intermediates)/src
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JAVA_SOURCES := $(all_java_sources)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JAVA_OBJECTS := $(patsubst %.java,%.class,$(LOCAL_SRC_FILES))
-ifeq ($(my_prefix),TARGET_)
-ifeq ($(LOCAL_SDK_VERSION),)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,core-libart)
-else
-ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),current)
-# LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS.
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,android_stubs_current)
-else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),system_current)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,android_system_stubs_current)
-else
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,sdk_v$(LOCAL_SDK_VERSION))
-endif # current or system_current
-endif # LOCAL_SDK_VERSION
-endif # TARGET_
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RESOURCE_DIR := $(LOCAL_RESOURCE_DIR)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_ASSET_DIR := $(LOCAL_ASSET_DIR)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_STATIC_JAVA_LIBRARIES := $(full_static_java_libs)
-
-# full_java_libs: The list of files that should be used as the classpath.
-#                 Using this list as a dependency list WILL NOT WORK.
-# full_java_lib_deps: Should be specified as a prerequisite of this module
-#                 to guarantee that the files in full_java_libs will
-#                 be up-to-date.
-ifdef LOCAL_IS_HOST_MODULE
-ifeq ($(USE_CORE_LIB_BOOTCLASSPATH),true)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,core-libart-hostdex,$(LOCAL_IS_HOST_MODULE))
-
-full_shared_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-full_java_lib_deps := $(call java-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE)) \
-    $(full_shared_java_libs)
-else
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH :=
-
-full_shared_java_libs := $(addprefix $(HOST_OUT_JAVA_LIBRARIES)/,\
-    $(addsuffix $(COMMON_JAVA_PACKAGE_SUFFIX),$(LOCAL_JAVA_LIBRARIES)))
-full_java_lib_deps := $(full_shared_java_libs)
-endif # USE_CORE_LIB_BOOTCLASSPATH
-else # !LOCAL_IS_HOST_MODULE
-full_shared_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-full_java_lib_deps := $(call java-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-endif # !LOCAL_IS_HOST_MODULE
-full_java_libs := $(full_shared_java_libs) $(full_static_java_libs) $(LOCAL_CLASSPATH)
-full_java_lib_deps += $(full_static_java_libs) $(LOCAL_CLASSPATH)
-
-# This is set by packages that are linking to other packages that export
-# shared libraries, allowing them to make use of the code in the linked apk.
-apk_libraries := $(sort $(LOCAL_APK_LIBRARIES) $(LOCAL_RES_LIBRARIES))
-ifneq ($(apk_libraries),)
-  link_apk_libraries := \
-      $(foreach lib,$(apk_libraries), \
-        $(call intermediates-dir-for, \
-              APPS,$(lib),,COMMON)/classes.jar)
-
-  # link against the jar with full original names (before proguard processing).
-  full_shared_java_libs += $(link_apk_libraries)
-  full_java_libs += $(link_apk_libraries)
-  full_java_lib_deps += $(link_apk_libraries)
-endif
-
-# This is set by packages that contain instrumentation, allowing them to
-# link against the package they are instrumenting.  Currently only one such
-# package is allowed.
-LOCAL_INSTRUMENTATION_FOR := $(strip $(LOCAL_INSTRUMENTATION_FOR))
-ifdef LOCAL_INSTRUMENTATION_FOR
-  ifneq ($(words $(LOCAL_INSTRUMENTATION_FOR)),1)
-    $(error \
-        $(LOCAL_PATH): Multiple LOCAL_INSTRUMENTATION_FOR members defined)
-  endif
-
-  link_instr_intermediates_dir.COMMON := $(call intermediates-dir-for, \
-      APPS,$(LOCAL_INSTRUMENTATION_FOR),,COMMON)
-  # link against the jar with full original names (before proguard processing).
-  link_instr_classes_jar := $(link_instr_intermediates_dir.COMMON)/classes.jar
-  full_java_libs += $(link_instr_classes_jar)
-  full_java_lib_deps += $(link_instr_classes_jar)
-endif
-
-endif  # need_compile_java
-
-# We may want to add jar manifest or jar resource files even if there is no java code at all.
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_EXTRA_JAR_ARGS := $(extra_jar_args)
-jar_manifest_file :=
-ifneq ($(strip $(LOCAL_JAR_MANIFEST)),)
-jar_manifest_file := $(LOCAL_PATH)/$(LOCAL_JAR_MANIFEST)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JAR_MANIFEST := $(jar_manifest_file)
-else
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JAR_MANIFEST :=
-endif
-
-###########################################################
 ## make clean- targets
 ###########################################################
 cleantarget := clean-$(my_register_name)
@@ -500,35 +275,12 @@
 ###########################################################
 ## Common definitions for module.
 ###########################################################
-
-# aapt doesn't accept multiple --extra-packages flags.
-# We have to collapse them into a single --extra-packages flag here.
-LOCAL_AAPT_FLAGS := $(strip $(LOCAL_AAPT_FLAGS))
-ifdef LOCAL_AAPT_FLAGS
-ifeq ($(filter 0 1,$(words $(filter --extra-packages,$(LOCAL_AAPT_FLAGS)))),)
-aapt_flags := $(subst --extra-packages$(space),--extra-packages@,$(LOCAL_AAPT_FLAGS))
-aapt_flags_extra_packages := $(patsubst --extra-packages@%,%,$(filter --extra-packages@%,$(aapt_flags)))
-aapt_flags_extra_packages := $(sort $(subst :,$(space),$(aapt_flags_extra_packages)))
-LOCAL_AAPT_FLAGS := $(filter-out --extra-packages@%,$(aapt_flags)) \
-    --extra-packages $(subst $(space),:,$(aapt_flags_extra_packages))
-aapt_flags_extra_packages :=
-aapt_flags :=
-endif
-endif
-
-# Propagate local configuration options to this target.
 $(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_PATH:=$(LOCAL_PATH)
-$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_AAPT_FLAGS:= $(LOCAL_AAPT_FLAGS) $(PRODUCT_AAPT_FLAGS)
-$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_JAVA_LIBRARIES:= $(LOCAL_JAVA_LIBRARIES)
-$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_MANIFEST_PACKAGE_NAME:= $(LOCAL_MANIFEST_PACKAGE_NAME)
-$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_MANIFEST_INSTRUMENTATION_FOR:= $(LOCAL_MANIFEST_INSTRUMENTATION_FOR)
-
-$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_ALL_JAVA_LIBRARIES:= $(full_java_libs)
 $(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_IS_HOST_MODULE := $(LOCAL_IS_HOST_MODULE)
 $(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_HOST:= $(my_host)
+$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_PREFIX := $(my_prefix)
 
 $(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_INTERMEDIATES_DIR:= $(intermediates)
-
 $(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_2ND_ARCH_VAR_PREFIX := $(LOCAL_2ND_ARCH_VAR_PREFIX)
 
 # Tell the module and all of its sub-modules who it is.
@@ -540,6 +292,15 @@
 .PHONY: $(my_register_name)
 $(my_register_name): $(LOCAL_BUILT_MODULE) $(LOCAL_INSTALLED_MODULE)
 
+# Set up phony targets that covers all modules under the given paths.
+# This allows us to build everything in given paths by running mmma/mma.
+my_path_components := $(subst /,$(space),$(LOCAL_PATH))
+my_path_prefix := MODULES-IN
+$(foreach c, $(my_path_components),\
+  $(eval my_path_prefix := $(my_path_prefix)-$(c))\
+  $(eval .PHONY : $(my_path_prefix))\
+  $(eval $(my_path_prefix) : $(my_register_name)))
+
 ###########################################################
 ## Module installation rule
 ###########################################################
@@ -565,8 +326,25 @@
 	$(copy-file-to-target-with-cp)
 endif
 
-endif # !LOCAL_UNINSTALLABLE_MODULE
+# Rule to install the module's companion init.rc.
+my_init_rc := $(LOCAL_INIT_RC_$(my_32_64_bit_suffix))
+my_init_rc_src :=
+my_init_rc_installed :=
+ifndef my_init_rc
+my_init_rc := $(LOCAL_INIT_RC)
+# Make sure we don't define the rule twice in multilib module.
+LOCAL_INIT_RC :=
+endif
+ifdef my_init_rc
+my_init_rc_src := $(LOCAL_PATH)/$(my_init_rc)
+my_init_rc_installed := $(TARGET_OUT$(partition_tag)_ETC)/init/$(notdir $(my_init_rc_src))
+$(my_init_rc_installed) : $(my_init_rc_src) | $(ACP)
+	@echo "Install: $@"
+	$(copy-file-to-new-target)
 
+$(my_register_name) : $(my_init_rc_installed)
+endif # my_init_rc
+endif # !LOCAL_UNINSTALLABLE_MODULE
 
 ###########################################################
 ## CHECK_BUILD goals
@@ -576,8 +354,6 @@
 # checked modules, use LOCAL_BUILT_MODULE.
 ifdef LOCAL_CHECKED_MODULE
   my_checked_module := $(LOCAL_CHECKED_MODULE)
-else ifdef java_alternative_checked_module
-  my_checked_module := $(java_alternative_checked_module)
 else
   my_checked_module := $(LOCAL_BUILT_MODULE)
 endif
@@ -615,9 +391,12 @@
     $(ALL_MODULES.$(my_register_name).BUILT) $(LOCAL_BUILT_MODULE)
 ifneq (true,$(LOCAL_UNINSTALLABLE_MODULE))
 ALL_MODULES.$(my_register_name).INSTALLED := \
-    $(strip $(ALL_MODULES.$(my_register_name).INSTALLED) $(LOCAL_INSTALLED_MODULE))
+    $(strip $(ALL_MODULES.$(my_register_name).INSTALLED) \
+    $(LOCAL_INSTALLED_MODULE) $(my_init_rc_installed))
 ALL_MODULES.$(my_register_name).BUILT_INSTALLED := \
-    $(strip $(ALL_MODULES.$(my_register_name).BUILT_INSTALLED) $(LOCAL_BUILT_MODULE):$(LOCAL_INSTALLED_MODULE))
+    $(strip $(ALL_MODULES.$(my_register_name).BUILT_INSTALLED) \
+    $(LOCAL_BUILT_MODULE):$(LOCAL_INSTALLED_MODULE) \
+    $(addprefix $(my_init_rc_src):,$(my_init_rc_installed)))
 endif
 ifdef LOCAL_PICKUP_FILES
 # Files or directories ready to pick up by the build system
@@ -625,13 +404,15 @@
 ALL_MODULES.$(my_register_name).PICKUP_FILES := \
     $(ALL_MODULES.$(my_register_name).PICKUP_FILES) $(LOCAL_PICKUP_FILES)
 endif
+my_required_modules := $(LOCAL_REQUIRED_MODULES) \
+    $(LOCAL_REQUIRED_MODULES_$(TARGET_$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH))
+ifdef LOCAL_IS_HOST_MODULE
+my_required_modules += $(LOCAL_REQUIRED_MODULES_$($(my_prefix)OS))
+endif
 ALL_MODULES.$(my_register_name).REQUIRED := \
-    $(strip $(ALL_MODULES.$(my_register_name).REQUIRED) $(LOCAL_REQUIRED_MODULES) \
-      $(LOCAL_REQUIRED_MODULES_$(TARGET_$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)))
+    $(strip $(ALL_MODULES.$(my_register_name).REQUIRED) $(my_required_modules))
 ALL_MODULES.$(my_register_name).EVENT_LOG_TAGS := \
     $(ALL_MODULES.$(my_register_name).EVENT_LOG_TAGS) $(event_log_tags)
-ALL_MODULES.$(my_register_name).INTERMEDIATE_SOURCE_DIR := \
-    $(ALL_MODULES.$(my_register_name).INTERMEDIATE_SOURCE_DIR) $(LOCAL_INTERMEDIATE_SOURCE_DIR)
 ALL_MODULES.$(my_register_name).MAKEFILE := \
     $(ALL_MODULES.$(my_register_name).MAKEFILE) $(LOCAL_MODULE_MAKEFILE)
 ifdef LOCAL_MODULE_OWNER
@@ -641,9 +422,7 @@
 ifdef LOCAL_2ND_ARCH_VAR_PREFIX
 ALL_MODULES.$(my_register_name).FOR_2ND_ARCH := true
 endif
-ifdef aidl_sources
-ALL_MODULES.$(my_register_name).AIDL_FILES := $(aidl_sources)
-endif
+ALL_MODULES.$(my_register_name).FOR_HOST_CROSS := $(my_host_cross)
 
 INSTALLABLE_FILES.$(LOCAL_INSTALLED_MODULE).MODULE := $(my_register_name)
 
@@ -698,89 +477,7 @@
 endif
 
 ###########################################################
-# JACK
-###########################################################
-ifdef LOCAL_JACK_ENABLED
-ifdef need_compile_java
-
-full_static_jack_libs := \
-    $(foreach lib,$(LOCAL_STATIC_JAVA_LIBRARIES), \
-      $(call intermediates-dir-for, \
-        JAVA_LIBRARIES,$(lib),$(LOCAL_IS_HOST_MODULE),COMMON)/classes.jack)
-
-ifeq ($(my_prefix),TARGET_)
-ifeq ($(LOCAL_SDK_VERSION),)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,core-libart)
-else
-ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),current)
-# LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS.
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,android_stubs_current)
-else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),system_current)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,android_system_stubs_current)
-else
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,sdk_v$(LOCAL_SDK_VERSION))
-endif # current or system_current
-endif # LOCAL_SDK_VERSION
-endif # TARGET_
-
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_STATIC_JACK_LIBRARIES := $(full_static_jack_libs)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JACK_VM_ARGS := $(LOCAL_JACK_VM_ARGS)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JACK_EXTRA_ARGS := $(LOCAL_JACK_EXTRA_ARGS)
-
-ifdef LOCAL_IS_HOST_MODULE
-ifeq ($(USE_CORE_LIB_BOOTCLASSPATH),true)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,core-libart-hostdex,$(LOCAL_IS_HOST_MODULE))
-full_shared_jack_libs := $(call jack-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-full_jack_lib_deps := $(call jack-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-else
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES :=
-full_shared_jack_libs := $(call jack-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-full_jack_lib_deps := $(full_shared_jack_libs)
-endif # USE_CORE_LIB_BOOTCLASSPATH
-else # !LOCAL_IS_HOST_MODULE
-full_shared_jack_libs := $(call jack-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-full_jack_lib_deps := $(call jack-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-endif # !LOCAL_IS_HOST_MODULE
-full_jack_libs := $(full_shared_jack_libs) $(full_static_jack_libs) $(LOCAL_JACK_CLASSPATH)
-full_jack_lib_deps += $(full_static_jack_libs) $(LOCAL_JACK_CLASSPATH)
-
-# This is set by packages that are linking to other packages that export
-# shared libraries, allowing them to make use of the code in the linked apk.
-ifneq ($(apk_libraries),)
-  link_apk_jack_libraries := \
-      $(foreach lib,$(apk_libraries), \
-        $(call intermediates-dir-for, \
-              APPS,$(lib),,COMMON)/classes.jack)
-
-  # link against the jar with full original names (before proguard processing).
-  full_shared_jack_libs += $(link_apk_jack_libraries)
-  full_jack_libs += $(link_apk_jack_libraries)
-  full_jack_lib_deps += $(link_apk_jack_libraries)
-endif
-
-# This is set by packages that contain instrumentation, allowing them to
-# link against the package they are instrumenting.  Currently only one such
-# package is allowed.
-ifdef LOCAL_INSTRUMENTATION_FOR
-
-   # link against the jar with full original names (before proguard processing).
-   link_instr_classes_jack := $(link_instr_intermediates_dir.COMMON)/classes.noshrob.jack
-   full_jack_libs += $(link_instr_classes_jack)
-   full_jack_lib_deps += $(link_instr_classes_jack)
-endif
-
-endif  # need_compile_java
-
-# Propagate local configuration options to this target.
-$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_ALL_JACK_LIBRARIES:= $(full_jack_libs)
-$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_JARJAR_RULES := $(LOCAL_JARJAR_RULES)
-
-endif # LOCAL_JACK_ENABLED
-
-###########################################################
 ## NOTICE files
 ###########################################################
 
 include $(BUILD_NOTICE_FILE)
-
-#:vi noexpandtab
diff --git a/core/binary.mk b/core/binary.mk
index e6ad788..028950a 100644
--- a/core/binary.mk
+++ b/core/binary.mk
@@ -24,7 +24,7 @@
   endif
 else
   ifeq ($(LOCAL_SYSTEM_SHARED_LIBRARIES),none)
-      my_system_shared_libraries := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES)
+      my_system_shared_libraries := libc libm
   else
       my_system_shared_libraries := $(LOCAL_SYSTEM_SHARED_LIBRARIES)
   endif
@@ -34,12 +34,15 @@
 # Because the same LOCAL_ variables may be used to define modules for both 1st arch and 2nd arch,
 # we can't modify them in place.
 my_src_files := $(LOCAL_SRC_FILES)
+my_src_files_exclude := $(LOCAL_SRC_FILES_EXCLUDE)
 my_static_libraries := $(LOCAL_STATIC_LIBRARIES)
 my_whole_static_libraries := $(LOCAL_WHOLE_STATIC_LIBRARIES)
 my_shared_libraries := $(LOCAL_SHARED_LIBRARIES)
 my_cflags := $(LOCAL_CFLAGS)
 my_conlyflags := $(LOCAL_CONLYFLAGS)
 my_cppflags := $(LOCAL_CPPFLAGS)
+my_cflags_no_override := $(GLOBAL_CFLAGS_NO_OVERRIDE)
+my_cppflags_no_override := $(GLOBAL_CPPFLAGS_NO_OVERRIDE)
 my_ldflags := $(LOCAL_LDFLAGS)
 my_ldlibs := $(LOCAL_LDLIBS)
 my_asflags := $(LOCAL_ASFLAGS)
@@ -50,7 +53,7 @@
 my_c_includes := $(LOCAL_C_INCLUDES)
 my_generated_sources := $(LOCAL_GENERATED_SOURCES)
 my_native_coverage := $(LOCAL_NATIVE_COVERAGE)
-my_additional_dependencies := $(LOCAL_MODULE_MAKEFILE) $(LOCAL_ADDITIONAL_DEPENDENCIES)
+my_additional_dependencies := $(LOCAL_MODULE_MAKEFILE_DEP) $(LOCAL_ADDITIONAL_DEPENDENCIES)
 my_export_c_include_dirs := $(LOCAL_EXPORT_C_INCLUDE_DIRS)
 
 ifdef LOCAL_IS_HOST_MODULE
@@ -143,7 +146,7 @@
 # MinGW spits out warnings about -fPIC even for -fpie?!) being ignored because
 # all code is position independent, and then those warnings get promoted to
 # errors.
-ifndef USE_MINGW
+ifneq ($($(my_prefix)OS),windows)
 ifeq ($(LOCAL_MODULE_CLASS),EXECUTABLES)
 my_cflags += -fpie
 else
@@ -151,7 +154,21 @@
 endif
 endif
 
+ifdef LOCAL_IS_HOST_MODULE
+my_src_files += $(LOCAL_SRC_FILES_$($(my_prefix)OS)) $(LOCAL_SRC_FILES_$($(my_prefix)OS)_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH))
+my_static_libraries += $(LOCAL_STATIC_LIBRARIES_$($(my_prefix)OS))
+my_shared_libraries += $(LOCAL_SHARED_LIBRARIES_$($(my_prefix)OS))
+my_cflags += $(LOCAL_CFLAGS_$($(my_prefix)OS))
+my_cppflags += $(LOCAL_CPPFLAGS_$($(my_prefix)OS))
+my_ldflags += $(LOCAL_LDFLAGS_$($(my_prefix)OS))
+my_ldlibs += $(LOCAL_LDLIBS_$($(my_prefix)OS))
+my_asflags += $(LOCAL_ASFLAGS_$($(my_prefix)OS))
+my_c_includes += $(LOCAL_C_INCLUDES_$($(my_prefix)OS))
+my_generated_sources += $(LOCAL_GENERATED_SOURCES_$($(my_prefix)OS))
+endif
+
 my_src_files += $(LOCAL_SRC_FILES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_SRC_FILES_$(my_32_64_bit_suffix))
+my_src_files_exclude += $(LOCAL_SRC_FILES_EXCLUDE_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_SRC_FILES_EXCLUDE_$(my_32_64_bit_suffix))
 my_shared_libraries += $(LOCAL_SHARED_LIBRARIES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_SHARED_LIBRARIES_$(my_32_64_bit_suffix))
 my_cflags += $(LOCAL_CFLAGS_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_CFLAGS_$(my_32_64_bit_suffix))
 my_cppflags += $(LOCAL_CPPFLAGS_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_CPPFLAGS_$(my_32_64_bit_suffix))
@@ -160,6 +177,8 @@
 my_c_includes += $(LOCAL_C_INCLUDES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_C_INCLUDES_$(my_32_64_bit_suffix))
 my_generated_sources += $(LOCAL_GENERATED_SOURCES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_GENERATED_SOURCES_$(my_32_64_bit_suffix))
 
+my_src_files := $(filter-out $(my_src_files_exclude),$(my_src_files))
+
 my_clang := $(strip $(LOCAL_CLANG))
 ifdef LOCAL_CLANG_$(my_32_64_bit_suffix)
 my_clang := $(strip $(LOCAL_CLANG_$(my_32_64_bit_suffix)))
@@ -171,26 +190,47 @@
 # clang is enabled by default for host builds
 # enable it unless we've specifically disabled clang above
 ifdef LOCAL_IS_HOST_MODULE
-    ifneq ($(HOST_OS),windows)
+    ifneq ($($(my_prefix)OS),windows)
     ifeq ($(my_clang),)
         my_clang := true
     endif
     endif
+# Add option to make clang the default for device build
+else ifeq ($(USE_CLANG_PLATFORM_BUILD),true)
+    ifeq ($(my_clang),)
+        my_clang := true
+    endif
 endif
 
-# Add option to make clang the default for device build
-ifeq ($(USE_CLANG_PLATFORM_BUILD),true)
-    ifeq ($(my_clang),)
-        my_clang := true
+my_cpp_std_version := -std=gnu++14
+
+ifneq ($(my_clang),true)
+    # GCC uses an invalid C++14 ABI (emits calls to
+    # __cxa_throw_bad_array_length, which is not a valid C++ RT ABI).
+    # http://b/25022512
+    my_cpp_std_version := -std=gnu++11
+endif
+
+ifdef LOCAL_SDK_VERSION
+    # The NDK handles this itself.
+    my_cpp_std_version :=
+endif
+
+ifdef LOCAL_IS_HOST_MODULE
+    ifneq ($(my_clang),true)
+        # The host GCC doesn't support C++14 (and is deprecated, so likely
+        # never will). Build these modules with C++11.
+        my_cpp_std_version := -std=gnu++11
     endif
 endif
 
+my_cppflags := $(my_cpp_std_version) $(my_cppflags)
+
+
 # arch-specific static libraries go first so that generic ones can depend on them
 my_static_libraries := $(LOCAL_STATIC_LIBRARIES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_STATIC_LIBRARIES_$(my_32_64_bit_suffix)) $(my_static_libraries)
 my_whole_static_libraries := $(LOCAL_WHOLE_STATIC_LIBRARIES_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_WHOLE_STATIC_LIBRARIES_$(my_32_64_bit_suffix)) $(my_whole_static_libraries)
 
-my_cflags := $(filter-out $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_UNSUPPORTED_CFLAGS),$(my_cflags))
-
 include $(BUILD_SYSTEM)/cxx_stl_setup.mk
 
 # Add static HAL libraries
@@ -202,12 +242,14 @@
 b_lib :=
 endif
 
-include $(BUILD_SYSTEM)/config_sanitizers.mk
-
-ifeq ($(strip $($(LOCAL_2ND_ARCH_VAR_PREFIX)WITHOUT_$(my_prefix)CLANG)),true)
-  my_clang :=
+ifneq ($(strip $(CUSTOM_$(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)LINKER)),)
+  my_linker := $(CUSTOM_$(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)LINKER)
+else
+  my_linker := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LINKER)
 endif
 
+include $(BUILD_SYSTEM)/config_sanitizers.mk
+
 # Add in libcompiler_rt for all regular device builds
 ifeq (,$(LOCAL_SDK_VERSION)$(WITHOUT_LIBCOMPILER_RT))
   my_static_libraries += $(COMPILER_RT_CONFIG_EXTRA_STATIC_LIBRARIES)
@@ -228,9 +270,10 @@
     my_cflags += $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_FDO_OPTIMIZE_CFLAGS)
     my_fdo_build := true
   endif
-  # Disable ccache (or other compiler wrapper).
-  my_cc_wrapper :=
-  my_cxx_wrapper :=
+  # Disable ccache (or other compiler wrapper) except gomacc, which
+  # can handle -fprofile-use properly.
+  my_cc_wrapper := $(filter $(GOMA_CC),$(my_cc_wrapper))
+  my_cxx_wrapper := $(filter $(GOMA_CC),$(my_cxx_wrapper))
 endif
 
 ###########################################################
@@ -276,17 +319,17 @@
 else # LOCAL_IS_HOST_MODULE
 
 ifeq ($(my_clang),true)
-my_host_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_HOST_GLOBAL_CFLAGS)
-my_host_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_HOST_GLOBAL_CONLYFLAGS)
-my_host_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_HOST_GLOBAL_CPPFLAGS)
-my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_HOST_GLOBAL_LDFLAGS)
-my_host_c_includes := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_C_INCLUDES)
+my_host_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CFLAGS)
+my_host_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CONLYFLAGS)
+my_host_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CPPFLAGS)
+my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LDFLAGS)
+my_host_c_includes := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)C_INCLUDES)
 else
-my_host_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_CFLAGS)
-my_host_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_CONLYFLAGS)
-my_host_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_CPPFLAGS)
-my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_LDFLAGS)
-my_host_c_includes := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_C_INCLUDES)
+my_host_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CFLAGS)
+my_host_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CONLYFLAGS)
+my_host_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CPPFLAGS)
+my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_LDFLAGS)
+my_host_c_includes := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)C_INCLUDES)
 endif # my_clang
 
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_HOST_C_INCLUDES := $(my_host_c_includes)
@@ -315,6 +358,14 @@
     my_native_coverage := false
 endif
 
+ifeq ($(my_clang),true)
+    my_coverage_lib := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBPROFILE_RT)
+else
+    my_coverage_lib := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBGCOV)
+endif
+
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_TARGET_COVERAGE_LIB := $(my_coverage_lib)
+
 ###########################################################
 ## Define PRIVATE_ variables used by multiple module types
 ###########################################################
@@ -367,6 +418,7 @@
   my_cxx := $(SYNTAX_TOOLS_PREFIX)/cxx-syntax $(my_syntax_arch) "$(my_cxx)"
 endif
 endif
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_LINKER := $(my_linker)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CXX := $(my_cxx)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CLANG := $(my_clang)
 
@@ -441,6 +493,20 @@
 RenderScript_file_stamp := $(intermediates)/RenderScriptCPP.stamp
 renderscript_intermediate := $(intermediates)/renderscript
 
+renderscript_target_api :=
+
+ifneq (,$(LOCAL_RENDERSCRIPT_TARGET_API))
+renderscript_target_api := $(LOCAL_RENDERSCRIPT_TARGET_API)
+else
+ifneq (,$(LOCAL_SDK_VERSION))
+# Set target-api for LOCAL_SDK_VERSIONs other than current.
+ifneq (,$(filter-out current system_current, $(LOCAL_SDK_VERSION)))
+renderscript_target_api := $(LOCAL_SDK_VERSION)
+endif
+endif  # LOCAL_SDK_VERSION is set
+endif  # LOCAL_RENDERSCRIPT_TARGET_API is set
+
+
 ifeq ($(LOCAL_RENDERSCRIPT_CC),)
 LOCAL_RENDERSCRIPT_CC := $(LLVM_RS_CC)
 endif
@@ -469,6 +535,7 @@
 $(RenderScript_file_stamp): PRIVATE_RS_FLAGS := $(renderscript_flags)
 $(RenderScript_file_stamp): PRIVATE_RS_SOURCE_FILES := $(renderscript_sources_fullpath)
 $(RenderScript_file_stamp): PRIVATE_RS_OUTPUT_DIR := $(renderscript_intermediate)
+$(RenderScript_file_stamp): PRIVATE_RS_TARGET_API := $(renderscript_target_api)
 $(RenderScript_file_stamp): PRIVATE_DEP_FILES := $(bc_dep_files)
 $(RenderScript_file_stamp): $(renderscript_sources_fullpath) $(LOCAL_RENDERSCRIPT_CC)
 	$(transform-renderscripts-to-cpp-and-bc)
@@ -573,13 +640,13 @@
     my_static_libraries += libprotobuf-c-nano
 else ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),full)
     ifdef LOCAL_SDK_VERSION
-        my_static_libraries += libprotobuf-cpp-full
+        my_static_libraries += libprotobuf-cpp-full-ndk
     else
         my_shared_libraries += libprotobuf-cpp-full
     endif
 else
     ifdef LOCAL_SDK_VERSION
-        my_static_libraries += libprotobuf-cpp-lite
+        my_static_libraries += libprotobuf-cpp-lite-ndk
     else
         my_shared_libraries += libprotobuf-cpp-lite
     endif
@@ -587,6 +654,58 @@
 endif  # $(proto_sources) non-empty
 
 ###########################################################
+## Compile the .dbus-xml files to c++ headers
+###########################################################
+dbus_definitions := $(filter %.dbus-xml,$(my_src_files))
+dbus_generated_headers :=
+ifneq ($(dbus_definitions),)
+
+dbus_definition_paths := $(addprefix $(LOCAL_PATH)/,$(dbus_definitions))
+dbus_service_config := $(filter %dbus-service-config.json,$(my_src_files))
+dbus_service_config_path := $(addprefix $(LOCAL_PATH)/,$(dbus_service_config))
+
+dbus_gen_dir := $(generated_sources_dir)/dbus_bindings
+
+ifdef LOCAL_DBUS_PROXY_PREFIX
+dbus_header_dir := $(dbus_gen_dir)/include/$(LOCAL_DBUS_PROXY_PREFIX)
+dbus_headers := dbus-proxies.h
+else
+dbus_header_dir := $(dbus_gen_dir)
+dbus_headers := $(patsubst %.dbus-xml,%.h,$(dbus_definitions))
+endif
+dbus_generated_headers := $(addprefix $(dbus_header_dir)/,$(dbus_headers))
+
+# Ensure that we only define build rules once in multilib builds.
+ifndef $(my_prefix)_$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_dbus_bindings_defined
+$(my_prefix)_$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_dbus_bindings_defined := true
+
+$(dbus_generated_headers): PRIVATE_MODULE := $(LOCAL_MODULE)
+$(dbus_generated_headers): PRIVATE_DBUS_SERVICE_CONFIG := $(dbus_service_config_path)
+$(dbus_generated_headers) : $(dbus_service_config_path) $(DBUS_GENERATOR)
+ifdef LOCAL_DBUS_PROXY_PREFIX
+$(dbus_generated_headers) : $(dbus_definition_paths)
+	$(generate-dbus-proxies)
+else
+$(dbus_generated_headers) : $(dbus_header_dir)/%.h : $(LOCAL_PATH)/%.dbus-xml
+	$(generate-dbus-adaptors)
+endif  # $(LOCAL_DBUS_PROXY_PREFIX)
+endif  # $(my_prefix)_$(LOCAL_MODULE_CLASS)_$(LOCAL_MODULE)_dbus_bindings_defined
+
+ifdef LOCAL_DBUS_PROXY_PREFIX
+# Auto-export the generated dbus proxy directory.
+my_export_c_include_dirs += $(dbus_gen_dir)/include
+my_c_includes += $(dbus_gen_dir)/include
+else
+my_export_c_include_dirs += $(dbus_header_dir)
+my_c_includes += $(dbus_header_dir)
+endif  # $(LOCAL_DBUS_PROXY_PREFIX)
+
+my_generated_sources += $(dbus_generated_headers)
+
+endif  # $(dbus_definitions) non-empty
+
+
+###########################################################
 ## AIDL: Compile .aidl files to .cpp and .h files
 ###########################################################
 aidl_src := $(strip $(filter %.aidl,$(my_src_files)))
@@ -611,8 +730,9 @@
 	$(transform-aidl-to-cpp)
 -include $(addsuffix .P,$(basename $(aidl_gen_cpp)))
 
-# Add generated headers to include path.
+# Add generated headers to include paths.
 my_c_includes += $(aidl_gen_include_root)
+my_export_c_include_dirs += $(aidl_gen_include_root)
 # Pick up the generated C++ files later for transformation to .o files.
 my_generated_sources += $(aidl_gen_cpp)
 
@@ -869,6 +989,20 @@
 endif
 
 ###########################################################
+## ObjC++: Compile .mm files to .o
+###########################################################
+
+objcpp_sources := $(filter %.mm,$(my_src_files))
+objcpp_objects := $(addprefix $(intermediates)/,$(objcpp_sources:.mm=.o))
+
+ifneq ($(strip $(objcpp_objects)),)
+$(objcpp_objects): $(intermediates)/%.o: $(TOPDIR)$(LOCAL_PATH)/%.mm $(yacc_cpps) $(proto_generated_headers) \
+    $(my_additional_dependencies)
+	$(transform-$(PRIVATE_HOST)mm-to-o)
+-include $(objcpp_objects:%.o=%.P)
+endif
+
+###########################################################
 ## AS: Compile .S files to .o.
 ###########################################################
 
@@ -952,11 +1086,11 @@
 import_includes := $(intermediates)/import_includes
 import_includes_deps := $(strip \
     $(foreach l, $(installed_shared_library_module_names), \
-      $(call intermediates-dir-for,SHARED_LIBRARIES,$(l),$(LOCAL_IS_HOST_MODULE),,$(LOCAL_2ND_ARCH_VAR_PREFIX))/export_includes) \
+      $(call intermediates-dir-for,SHARED_LIBRARIES,$(l),$(LOCAL_IS_HOST_MODULE),,$(LOCAL_2ND_ARCH_VAR_PREFIX),$(my_host_cross))/export_includes) \
     $(foreach l, $(my_static_libraries) $(my_whole_static_libraries), \
-      $(call intermediates-dir-for,STATIC_LIBRARIES,$(l),$(LOCAL_IS_HOST_MODULE),,$(LOCAL_2ND_ARCH_VAR_PREFIX))/export_includes))
+      $(call intermediates-dir-for,STATIC_LIBRARIES,$(l),$(LOCAL_IS_HOST_MODULE),,$(LOCAL_2ND_ARCH_VAR_PREFIX),$(my_host_cross))/export_includes))
 $(import_includes): PRIVATE_IMPORT_EXPORT_INCLUDES := $(import_includes_deps)
-$(import_includes) : $(LOCAL_MODULE_MAKEFILE) $(import_includes_deps)
+$(import_includes) : $(LOCAL_MODULE_MAKEFILE_DEP) $(import_includes_deps)
 	@echo Import includes file: $@
 	$(hide) mkdir -p $(dir $@) && rm -f $@
 ifdef import_includes_deps
@@ -981,6 +1115,7 @@
     $(c_objects) \
     $(gen_c_objects) \
     $(objc_objects) \
+    $(objcpp_objects) \
     $(yacc_objects) \
     $(lex_objects) \
     $(proto_generated_objects) \
@@ -1041,6 +1176,7 @@
     $(addprefix $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_INTERMEDIATE_LIBRARIES)/, \
       $(addsuffix $(so_suffix), \
         $(my_shared_libraries)))
+built_shared_library_tocs := $(addsuffix .toc, $(built_shared_libraries))
 
 # Add the NDK libraries to the built module dependency
 my_system_shared_libraries_fullpath := \
@@ -1054,12 +1190,14 @@
     $(addprefix $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_INTERMEDIATE_LIBRARIES)/, \
       $(addsuffix $(so_suffix), \
         $(installed_shared_library_module_names)))
+built_shared_library_tocs := $(addsuffix .toc, $(built_shared_libraries))
+my_system_shared_libraries_fullpath :=
 endif
 
 built_static_libraries := \
     $(foreach lib,$(my_static_libraries), \
       $(call intermediates-dir-for, \
-        STATIC_LIBRARIES,$(lib),$(LOCAL_IS_HOST_MODULE),,$(LOCAL_2ND_ARCH_VAR_PREFIX))/$(lib)$(a_suffix))
+        STATIC_LIBRARIES,$(lib),$(LOCAL_IS_HOST_MODULE),,$(LOCAL_2ND_ARCH_VAR_PREFIX),$(my_host_cross))/$(lib)$(a_suffix))
 
 ifdef LOCAL_SDK_VERSION
 built_static_libraries += $(my_ndk_stl_static_lib)
@@ -1068,7 +1206,7 @@
 built_whole_libraries := \
     $(foreach lib,$(my_whole_static_libraries), \
       $(call intermediates-dir-for, \
-        STATIC_LIBRARIES,$(lib),$(LOCAL_IS_HOST_MODULE),,$(LOCAL_2ND_ARCH_VAR_PREFIX))/$(lib)$(a_suffix))
+        STATIC_LIBRARIES,$(lib),$(LOCAL_IS_HOST_MODULE),,$(LOCAL_2ND_ARCH_VAR_PREFIX),$(my_host_cross))/$(lib)$(a_suffix))
 
 # We don't care about installed static libraries, since the
 # libraries have already been linked into the module at that point.
@@ -1092,6 +1230,8 @@
 my_cflags += $(LOCAL_CLANG_CFLAGS)
 my_conlyflags += $(LOCAL_CLANG_CONLYFLAGS)
 my_cppflags += $(LOCAL_CLANG_CPPFLAGS)
+my_cflags_no_override += $(GLOBAL_CLANG_CFLAGS_NO_OVERRIDE)
+my_cppflags_no_override += $(GLOBAL_CLANG_CPPFLAGS_NO_OVERRIDE)
 my_asflags += $(LOCAL_CLANG_ASFLAGS)
 my_ldflags += $(LOCAL_CLANG_LDFLAGS)
 my_cflags += $(LOCAL_CLANG_CFLAGS_$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)) $(LOCAL_CLANG_CFLAGS_$(my_32_64_bit_suffix))
@@ -1111,18 +1251,28 @@
   my_cflags := $(filter-out $(fdo_incompatible_flags),$(my_cflags))
 endif
 
+# No one should ever use this flag. On GCC it's mere presence will disable all
+# warnings, even those that are specified after it (contrary to typical warning
+# flag behavior). This circumvents CFLAGS_NO_OVERRIDE from forcibly enabling the
+# warnings that are *always* bugs.
+my_illegal_flags := -w
+my_cflags := $(filter-out $(my_illegal_flags),$(my_cflags))
+my_cppflags := $(filter-out $(my_illegal_flags),$(my_cppflags))
+my_conlyflags := $(filter-out $(my_illegal_flags),$(my_conlyflags))
+
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_YACCFLAGS := $(LOCAL_YACCFLAGS)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_ASFLAGS := $(my_asflags)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CONLYFLAGS := $(my_conlyflags)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CFLAGS := $(my_cflags)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CPPFLAGS := $(my_cppflags)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CFLAGS_NO_OVERRIDE := $(my_cflags_no_override)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CPPFLAGS_NO_OVERRIDE := $(my_cppflags_no_override)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RTTI_FLAG := $(LOCAL_RTTI_FLAG)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_DEBUG_CFLAGS := $(debug_cflags)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_C_INCLUDES := $(my_c_includes)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_IMPORT_INCLUDES := $(import_includes)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_LDFLAGS := $(my_ldflags)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_LDLIBS := $(my_ldlibs)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_NO_CRT := $(strip $(LOCAL_NO_CRT) $(LOCAL_NO_CRT_$(TARGET_$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH)))
 
 # this is really the way to get the files onto the command line instead
 # of using $^, because then LOCAL_ADDITIONAL_DEPENDENCIES doesn't work
@@ -1136,7 +1286,8 @@
 ###########################################################
 # all_libraries is used for the dependencies on LOCAL_BUILT_MODULE.
 all_libraries := \
-    $(built_shared_libraries) \
+    $(built_shared_library_tocs) \
+    $(my_system_shared_libraries_fullpath) \
     $(built_static_libraries) \
     $(built_whole_libraries)
 
@@ -1151,7 +1302,10 @@
 export_includes := $(intermediates)/export_includes
 $(export_includes): PRIVATE_EXPORT_C_INCLUDE_DIRS := $(my_export_c_include_dirs)
 # Make sure .pb.h are already generated before any dependent source files get compiled.
-$(export_includes) : $(LOCAL_MODULE_MAKEFILE) $(proto_generated_headers)
+# Similarly, the generated DBus headers need to exist before we export their location.
+# People are not going to consume the aidl generated cpp file, but the cpp file is
+# generated after the headers, so this is a convenient way to ensure the headers exist.
+$(export_includes) : $(LOCAL_MODULE_MAKEFILE_DEP) $(proto_generated_headers) $(dbus_generated_headers) $(aidl_gen_cpp)
 	@echo Export includes file: $< -- $@
 	$(hide) mkdir -p $(dir $@) && rm -f $@
 ifdef my_export_c_include_dirs
diff --git a/core/build-system.html b/core/build-system.html
index caade58..3f638c3 100644
--- a/core/build-system.html
+++ b/core/build-system.html
@@ -462,26 +462,17 @@
 <p>Sometimes you need to set flags specifically for different platforms.  Here
 is a list of which values the different build-system defined variables will be
 set to and some examples.</p>
-<p>For a device build, <code>TARGET_OS</code> is <code>linux</code> (we're using
-linux!), and <code>TARGET_ARCH</code> is <code>arm</code>.</p>
-<p>For a simulator build, <code>TARGET_OS</code> and <code>TARGET_ARCH</code>
-are set to the same as <code>HOST_OS</code> and <code>HOST_ARCH</code> are
-on your platform.  <code>TARGET_PRODUCT</code> is the name of the target
-hardware/product you are building for.  The value <code>sim</code> is used
-for the simulator.  We haven't thought through the full extent of customization
-that will happen here, but likely there will be additional UI configurations
-specified here as well.</p>
 <table cellspacing=25>
 <tr>
     <td valign=top align=center>
         <b>HOST_OS</b><br/>
         linux<br/>
-        darwin<br/>
-        (cygwin)
+        darwin
     </td>
     <td valign=top align=center>
         <b>HOST_ARCH</b><br/>
-        x86
+        x86<br/>
+        x86_64
     </td>
     <td valign=top align=center>
         <b>HOST_BUILD_TYPE</b><br/>
@@ -491,42 +482,40 @@
 </tr>
 <tr>
     <td valign=top align=center>
-        <b>TARGET_OS</b><br/>
-        linux<br/>
-        darwin<br/>
-        (cygwin)
-    </td>
-    <td valign=top align=center>
         <b>TARGET_ARCH</b><br/>
         arm<br/>
-        x86
+        arm64<br/>
+        mips<br/>
+        mips64<br/>
+        x86<br/>
+        x86_64
     </td>
     <td valign=top align=center>
         <b>TARGET_BUILD_TYPE</b><br/>
         release<br/>
         debug
     </td>
-    <td valign=top align=center>
-        <b>TARGET_PRODUCT</b><br/>
-        sim<br/>
-        dream<br/>
-        sooner
-    </td>
 </tr>
 </table>
 
+<p>There are also special variables to use instead of conditionals. Many of the
+normal variables (LOCAL_SRC_FILES, LOCAL_CFLAGS, etc) can be conditionally added
+to with _{arch} _{32|64}, and for the host, _{os}.</p>
+
 <h4>Some Examples</h4>
 <pre>ifeq ($(TARGET_BUILD_TYPE),release)
 LOCAL_CFLAGS += -DNDEBUG=1
 endif
 
+LOCAL_CFLAGS_arm += -DTARGET_IS_ARM
+
+LOCAL_CFLAGS_64 += -DBIG_POINTER
+
 # from libutils
-ifeq ($(TARGET_OS),linux)
 # Use the futex based mutex and condition variable
 # implementation from android-arm because it's shared mem safe
-LOCAL_SRC_FILES += futex_synchro.c
-LOCAL_LDLIBS += -lrt -ldl
-endif
+LOCAL_SRC_FILES_linux += futex_synchro.c
+LOCAL_LDLIBS_linux += -lrt -ldl
 
 </pre>
 
@@ -554,7 +543,7 @@
 the unstripped executables so GDB can find the symbols.
 <code>LOCAL_UNSTRIPPED_PATH</code> is not necessary if you only specified
 <code>LOCAL_MODULE_RELATIVE_PATH</code>.</p>
-<p>Look in <code>config/envsetup.make</code> for all of the variables defining
+<p>Look in <code>core/envsetup.mk</code> for all of the variables defining
 places to build things.</p>
 <p>FYI: If you're installing an executable to /sbin, you probably also want to
 set <code>LOCAL_FORCE_STATIC_EXCUTABLE := true</code> in your Android.mk, which
@@ -587,6 +576,11 @@
     and definitions that are specific to either the host or the target builds.
     Do not set variables that start with HOST_ or TARGET_ in your makefiles.
     </li>
+    <li><b>HOST_CROSS_</b> - These contain the directories and definitions that
+    are specific to cross-building host binaries. The common case is building
+    windows host tools on linux. Do not set variables that start with
+    HOST_CROSS_ in your makefiles.
+    </li>
     <li><b>BUILD_</b> and <b>CLEAR_VARS</b> - These contain the names of
     well-defined template makefiles to include.  Some examples are CLEAR_VARS
     and BUILD_HOST_PACKAGE.</li>
@@ -773,13 +767,13 @@
 </code></p>
 
 <h4>LOCAL_PREBUILT_EXECUTABLES</h4>
-<p>When including $(BUILD_PREBUILT) or $(BUILD_HOST_PREBUILT), set these to
-executables that you want copied.  They're located automatically into the
+<p>When including $(BUILD_MULTI_PREBUILT) or $(BUILD_HOST_PREBUILT), set these
+to executables that you want copied.  They're located automatically into the
 right bin directory.</p>
 
 <h4>LOCAL_PREBUILT_LIBS</h4>
-<p>When including $(BUILD_PREBUILT) or $(BUILD_HOST_PREBUILT), set these to
-libraries that you want copied.  They're located automatically into the
+<p>When including $(BUILD_MULTI_PREBUILT) or $(BUILD_HOST_PREBUILT), set these
+to libraries that you want copied.  They're located automatically into the
 right lib directory.</p>
 
 <h4>LOCAL_SHARED_LIBRARIES</h4>
@@ -836,6 +830,16 @@
 the relative path.</p>
 <p>See <a href="#moving-modules">Putting modules elsewhere</a> for more.</p>
 
+<h4>LOCAL_MODULE_HOST_OS</h4>
+<p>This specifies which OSes are supported by this host module. It is not used
+for target builds. The accepted values here are combinations of
+<code>linux</code>, <code>darwin</code>, and <code>windows</code>. By default,
+linux and darwin(MacOS) are considered to be supported. If a module should
+build under windows, you must specify windows, and any others to be supported.
+Some examples:</p>
+<p><code>LOCAL_MODULE_HOST_OS := linux<br/>
+LOCAL_MODULE_HOST_OS := darwin linux windows</code></p>
+
 <h4>LOCAL_UNSTRIPPED_PATH</h4>
 <p>Instructs the build system to put the unstripped version of the module
 somewhere other than what's normal for its type.  Usually, you override this
@@ -878,10 +882,10 @@
 If you make a change that requires an update, you need to update two places
 so this message will be printed.
 <ul>
-    <li>In config/envsetup.make, increment the
+    <li>In core/envsetup.mk, increment the
         CORRECT_BUILD_ENV_SEQUENCE_NUMBER definition.</li>
     <li>In buildspec.mk.default, update the BUILD_ENV_SEQUENCE_DUMBER
-        definition to match the one in config/envsetup.make</li>
+        definition to match the one in core/envsetup.mk</li>
 </ul>
 The scripts automatically get the value from the build system, so they will
 trigger the warning as well.
@@ -900,53 +904,39 @@
 for some other dependency that isn't created automatically.</p>
 
 <h4>LOCAL_BUILT_MODULE</h4>
+<p class=warning>This should not be used, since multiple binaries are now
+created from a single module defintiion.</p>
 <p>When a module is built, the module is created in an intermediate
 directory then copied to its final location.  LOCAL_BUILT_MODULE is
 the full path to the intermediate file.  See LOCAL_INSTALLED_MODULE
 for the path to the final installed location of the module.</p>
 
-<h4>LOCAL_HOST</h4>
-<p>Set by the host_xxx.make includes to tell base_rules.make and the other
-includes that we're building for the host.  Kenneth did this as part of
-openbinder, and I would like to clean it up so the rules, includes and
-definitions aren't duplicated for host and target.</p>
+<h4>LOCAL_IS_HOST_MODULE</h4>
+<p>Set by the host_xxx.mk includes to tell base_rules.mk and the other
+includes that we're building for the host.</p>
 
 <h4>LOCAL_INSTALLED_MODULE</h4>
+<p class=warning>This should not be used, since multiple binaries are now
+created from a single module defintiion.</p>
 <p>The fully qualified path name of the final location of the module.
 See LOCAL_BUILT_MODULE for the location of the intermediate file that
 the make rules should actually be constructing.</p>
 
-<h4>LOCAL_REPLACE_VARS</h4>
-<p>Used in some stuff remaining from the openbinder for building scripts
-with particular values set,</p>
-
-<h4>LOCAL_SCRIPTS</h4>
-<p>Used in some stuff remaining from the openbinder build system that we
-might find handy some day.</p>
-
 <h4>LOCAL_MODULE_CLASS</h4>
 <p>Which kind of module this is.  This variable is used to construct other
-variable names used to locate the modules.  See base_rules.make and
-envsetup.make.</p>
-
-<h4>LOCAL_MODULE_NAME</h4>
-<p>Set to the leaf name of the LOCAL_BUILT_MODULE.  I'm not sure,
-but it looks like it's just used in the WHO_AM_I variable to identify
-in the pretty printing what's being built.</p>
+variable names used to locate the modules.  See base_rules.mk and
+envsetup.mk.</p>
 
 <h4>LOCAL_MODULE_SUFFIX</h4>
 <p>The suffix that will be appended to <code>LOCAL_MODULE</code> to form
 <code>LOCAL_MODULE_NAME</code>.  For example, .so, .a, .dylib.</p>
 
 <h4>LOCAL_STRIP_MODULE</h4>
-<p>Calculated in base_rules.make to determine if this module should actually
-be stripped or not, based on whether <code>LOCAL_STRIPPABLE_MODULE</code>
-is set, and whether the combo is configured to ever strip modules.  With
-Iliyan's stripping tool, this might change.</p>
-
-<h4>LOCAL_STRIPPABLE_MODULE</h4>
-<p>Set by the include makefiles if that type of module is strippable. 
-Executables and shared libraries are.</p>
+<p>If set to true (the default), the binary will be stripped and a debug
+link will be set up so that GDB will still work. If set to no_debuglink,
+the binary will be stripped, but no debug link will be added. If set to
+keep_symbols, it will strip the debug information, but keep the symbol table.
+Any other value will prevent stripping.</p>
 
 <h4>LOCAL_SYSTEM_SHARED_LIBRARIES</h4>
 <p>Used while building the base libraries: libc, libm, libdl.  Usually
diff --git a/core/ccache.mk b/core/ccache.mk
index 34e5e1c..c99d933 100644
--- a/core/ccache.mk
+++ b/core/ccache.mk
@@ -37,11 +37,6 @@
   export CCACHE_CPP2 := true
 
   CCACHE_HOST_TAG := $(HOST_PREBUILT_TAG)
-  # If we are cross-compiling Windows binaries on Linux
-  # then use the linux ccache binary instead.
-  ifeq ($(HOST_OS)-$(BUILD_OS),windows-linux)
-    CCACHE_HOST_TAG := linux-$(HOST_PREBUILT_ARCH)
-  endif
   ccache := prebuilts/misc/$(CCACHE_HOST_TAG)/ccache/ccache
   # Check that the executable is here.
   ccache := $(strip $(wildcard $(ccache)))
diff --git a/core/clang/HOST_CROSS_windows.mk b/core/clang/HOST_CROSS_windows.mk
new file mode 100644
index 0000000..74adb58
--- /dev/null
+++ b/core/clang/HOST_CROSS_windows.mk
@@ -0,0 +1,56 @@
+
+include $(BUILD_SYSTEM)/clang/x86.mk
+
+CLANG_CONFIG_x86_HOST_CROSS_TRIPLE := i686-pc-mingw32
+
+CLANG_CONFIG_x86_HOST_CROSS_EXTRA_ASFLAGS := \
+  $(CLANG_CONFIG_EXTRA_ASFLAGS) \
+  $(CLANG_CONFIG_HOST_CROSS_EXTRA_ASFLAGS) \
+  $(CLANG_CONFIG_x86_EXTRA_ASFLAGS) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_COMBO_EXTRA_ASFLAGS) \
+  -target $(CLANG_CONFIG_x86_HOST_CROSS_TRIPLE)
+
+CLANG_CONFIG_x86_HOST_CROSS_EXTRA_CFLAGS := \
+  $(CLANG_CONFIG_EXTRA_CFLAGS) \
+  $(CLANG_CONFIG_HOST_CROSS_EXTRA_CFLAGS) \
+  $(CLANG_CONFIG_x86_EXTRA_CFLAGS) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_COMBO_EXTRA_CFLAGS) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_EXTRA_ASFLAGS)
+
+CLANG_CONFIG_x86_HOST_CROSS_EXTRA_CONLYFLAGS := \
+  $(CLANG_CONFIG_EXTRA_CONLYFLAGS) \
+  $(CLANG_CONFIG_HOST_CROSS_EXTRA_CONLYFLAGS) \
+  $(CLANG_CONFIG_x86_EXTRA_CONLYFLAGS) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_COMBO_EXTRA_CONLYFLAGS)
+
+CLANG_CONFIG_x86_HOST_CROSS_EXTRA_CPPFLAGS := \
+  $(CLANG_CONFIG_EXTRA_CPPFLAGS) \
+  $(CLANG_CONFIG_HOST_CROSS_EXTRA_CPPFLAGS) \
+  $(CLANG_CONFIG_x86_EXTRA_CPPFLAGS) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_COMBO_EXTRA_CPPFLAGS) \
+  -target $(CLANG_CONFIG_x86_HOST_CROSS_TRIPLE)
+
+CLANG_CONFIG_x86_HOST_CROSS_EXTRA_LDFLAGS := \
+  $(CLANG_CONFIG_EXTRA_LDFLAGS) \
+  $(CLANG_CONFIG_HOST_CROSS_EXTRA_LDFLAGS) \
+  $(CLANG_CONFIG_x86_EXTRA_LDFLAGS) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_COMBO_EXTRA_LDFLAGS) \
+  -target $(CLANG_CONFIG_x86_HOST_CROSS_TRIPLE)
+
+CLANG_HOST_CROSS_GLOBAL_CFLAGS := \
+  $(call convert-to-host-clang-flags,$(HOST_CROSS_GLOBAL_CFLAGS)) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_EXTRA_CFLAGS)
+
+CLANG_HOST_CROSS_GLOBAL_CONLYFLAGS := \
+  $(call convert-to-host-clang-flags,$(HOST_CROSS_GLOBAL_CONLYFLAGS)) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_EXTRA_CONLYFLAGS)
+
+CLANG_HOST_CROSS_GLOBAL_CPPFLAGS := \
+  $(call convert-to-host-clang-flags,$(HOST_CROSS_GLOBAL_CPPFLAGS)) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_EXTRA_CPPFLAGS)
+
+CLANG_HOST_CROSS_GLOBAL_LDFLAGS := \
+  $(call convert-to-host-clang-flags,$(HOST_CROSS_GLOBAL_LDFLAGS)) \
+  $(CLANG_CONFIG_x86_HOST_CROSS_EXTRA_LDFLAGS)
+
+HOST_CROSS_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-i686.a
diff --git a/core/clang/HOST_x86.mk b/core/clang/HOST_x86.mk
index f14a9c3..0ec64ad 100644
--- a/core/clang/HOST_x86.mk
+++ b/core/clang/HOST_x86.mk
@@ -16,9 +16,6 @@
 CLANG_CONFIG_x86_HOST_COMBO_EXTRA_CPPFLAGS := $(CLANG_CONFIG_x86_DARWIN_HOST_EXTRA_CPPFLAGS)
 CLANG_CONFIG_x86_HOST_COMBO_EXTRA_LDFLAGS := $(CLANG_CONFIG_x86_DARWIN_HOST_EXTRA_LDFLAGS)
 endif
-ifeq ($(HOST_OS),windows)
-CLANG_CONFIG_x86_HOST_TRIPLE := i686-pc-mingw32
-endif
 
 CLANG_CONFIG_x86_HOST_EXTRA_ASFLAGS := \
   $(CLANG_CONFIG_EXTRA_ASFLAGS) \
diff --git a/core/clang/HOST_x86_64.mk b/core/clang/HOST_x86_64.mk
index 1211e73..d46cb67 100644
--- a/core/clang/HOST_x86_64.mk
+++ b/core/clang/HOST_x86_64.mk
@@ -16,9 +16,6 @@
 CLANG_CONFIG_x86_64_HOST_COMBO_EXTRA_CPPFLAGS := $(CLANG_CONFIG_x86_DARWIN_HOST_EXTRA_CPPFLAGS)
 CLANG_CONFIG_x86_64_HOST_COMBO_EXTRA_LDFLAGS := $(CLANG_CONFIG_x86_DARWIN_HOST_EXTRA_LDFLAGS)
 endif
-ifeq ($(HOST_OS),windows)
-CLANG_CONFIG_x86_64_HOST_TRIPLE := x86_64-pc-mingw64
-endif
 
 CLANG_CONFIG_x86_64_HOST_EXTRA_ASFLAGS := \
   $(CLANG_CONFIG_EXTRA_ASFLAGS) \
diff --git a/core/clang/HOST_x86_common.mk b/core/clang/HOST_x86_common.mk
index 74b5a69..fc98dd5 100644
--- a/core/clang/HOST_x86_common.mk
+++ b/core/clang/HOST_x86_common.mk
@@ -48,7 +48,3 @@
   -L$($(clang_2nd_arch_prefix)HOST_TOOLCHAIN_FOR_CLANG)/x86_64-linux/lib32/
 endif
 endif  # Linux
-
-ifeq ($(HOST_OS),windows)
-# nothing required here yet
-endif
diff --git a/core/clang/TARGET_arm.mk b/core/clang/TARGET_arm.mk
index 62ce242..5ac5477 100644
--- a/core/clang/TARGET_arm.mk
+++ b/core/clang/TARGET_arm.mk
@@ -69,4 +69,5 @@
 
 # Address sanitizer clang config
 $(clang_2nd_arch_prefix)ADDRESS_SANITIZER_RUNTIME_LIBRARY := libclang_rt.asan-arm-android
-$(clang_2nd_arch_prefix)ADDRESS_SANITIZER_RPATH := /system/lib/asan
+$(clang_2nd_arch_prefix)ADDRESS_SANITIZER_RPATH := /data/vendor/lib:/$(TARGET_COPY_OUT_VENDOR)/lib:/data/lib
+$(clang_2nd_arch_prefix)ADDRESS_SANITIZER_LINKER := /system/bin/linker_asan
diff --git a/core/clang/TARGET_arm64.mk b/core/clang/TARGET_arm64.mk
index ea4d937..532ca77 100644
--- a/core/clang/TARGET_arm64.mk
+++ b/core/clang/TARGET_arm64.mk
@@ -66,5 +66,6 @@
 TARGET_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-aarch64-android.a
 
 # Address sanitizer clang config
-ADDRESS_SANITIZER_RUNTIME_LIBRARY := libclang_rt.asan-arm64-android
-ADDRESS_SANITIZER_RPATH := /system/lib64/asan
+ADDRESS_SANITIZER_RUNTIME_LIBRARY := libclang_rt.asan-aarch64-android
+ADDRESS_SANITIZER_RPATH := /data/vendor/lib64:/$(TARGET_COPY_OUT_VENDOR)/lib64:/data/lib64
+ADDRESS_SANITIZER_LINKER := /system/bin/linker_asan64
diff --git a/core/clang/TARGET_x86.mk b/core/clang/TARGET_x86.mk
index 4e9e8be..f982439 100644
--- a/core/clang/TARGET_x86.mk
+++ b/core/clang/TARGET_x86.mk
@@ -19,11 +19,8 @@
   $(CLANG_CONFIG_TARGET_EXTRA_CFLAGS) \
   $(CLANG_CONFIG_x86_EXTRA_CFLAGS) \
   $(CLANG_CONFIG_x86_TARGET_EXTRA_ASFLAGS) \
-  -fno-optimize-sibling-calls \
   -mstackrealign
 
-# http://llvm.org/bugs/show_bug.cgi?id=15086,
-# llvm tail call optimization is wrong for x86.
 # -mstackrealign is needed to realign stack in native code
 # that could be called from JNI, so that movaps instruction
 # will work on assumed stack aligned local variables.
@@ -74,3 +71,8 @@
 $(clang_2nd_arch_prefix)RS_COMPAT_TRIPLE := i686-linux-android
 
 $(clang_2nd_arch_prefix)TARGET_LIBPROFILE_RT := $(LLVM_RTLIB_PATH)/libclang_rt.profile-i686-android.a
+
+# Address sanitizer clang config
+$(clang_2nd_arch_prefix)ADDRESS_SANITIZER_RUNTIME_LIBRARY := libclang_rt.asan-i686-android
+$(clang_2nd_arch_prefix)ADDRESS_SANITIZER_RPATH := /data/vendor/lib:/$(TARGET_COPY_OUT_VENDOR)/lib:/data/lib
+$(clang_2nd_arch_prefix)ADDRESS_SANITIZER_LINKER := /system/bin/linker_asan
diff --git a/core/clang/arm.mk b/core/clang/arm.mk
index bf31f51..e66aa6c 100644
--- a/core/clang/arm.mk
+++ b/core/clang/arm.mk
@@ -7,12 +7,7 @@
 ifneq (,$(filter krait,$(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT)))
   # Android's clang support's krait as a CPU whereas GCC doesn't. Specify
   # -mcpu here rather than the more normal core/combo/arch/arm/armv7-a-neon.mk.
-  CLANG_CONFIG_arm_EXTRA_CFLAGS += -mcpu=krait
-endif
-
-ifeq ($(HOST_OS),darwin)
-  # Darwin is really bad at dealing with idiv/sdiv. Don't use krait on Darwin.
-  CLANG_CONFIG_arm_EXTRA_CFLAGS += -mcpu=cortex-a9
+  CLANG_CONFIG_arm_EXTRA_CFLAGS += -mcpu=krait -mfpu=neon-vfpv4
 endif
 
 CLANG_CONFIG_arm_EXTRA_CPPFLAGS :=
diff --git a/core/clang/config.mk b/core/clang/config.mk
index e1bfb01..756bf49 100644
--- a/core/clang/config.mk
+++ b/core/clang/config.mk
@@ -1,13 +1,8 @@
 ## Clang configurations.
 
-# WITHOUT_CLANG covers both HOST and TARGET
-ifeq ($(WITHOUT_CLANG),true)
-WITHOUT_TARGET_CLANG := true
-WITHOUT_HOST_CLANG := true
-endif
-
-LLVM_PREBUILTS_VERSION := 3.6
-LLVM_PREBUILTS_PATH := prebuilts/clang/$(BUILD_OS)-x86/host/$(LLVM_PREBUILTS_VERSION)/bin
+LLVM_PREBUILTS_VERSION ?= 3.8
+LLVM_PREBUILTS_BASE ?= prebuilts/clang/host
+LLVM_PREBUILTS_PATH := $(LLVM_PREBUILTS_BASE)/$(BUILD_OS)-x86/$(LLVM_PREBUILTS_VERSION)/bin
 LLVM_RTLIB_PATH := $(LLVM_PREBUILTS_PATH)/../lib/clang/$(LLVM_PREBUILTS_VERSION)/lib/linux/
 
 CLANG := $(LLVM_PREBUILTS_PATH)/clang$(BUILD_EXECUTABLE_SUFFIX)
@@ -33,7 +28,8 @@
   -Werror=int-conversion
 
 # Disable overly aggressive warning for macros defined with a leading underscore
-# This happens in AndroidConfig.h, which is included nearly everywhere.
+# This used to happen in AndroidConfig.h, which was included everywhere.
+# TODO: can we remove this now?
 CLANG_CONFIG_EXTRA_CFLAGS += \
   -Wno-reserved-id-macro
 
@@ -52,6 +48,11 @@
 CLANG_CONFIG_EXTRA_CPPFLAGS += \
   -Wno-inconsistent-missing-override
 
+# Force clang to always output color diagnostics.  Ninja will strip the ANSI
+# color codes if it is not running in a terminal.
+CLANG_CONFIG_EXTRA_CFLAGS += \
+  -fcolor-diagnostics
+
 CLANG_CONFIG_UNKNOWN_CFLAGS := \
   -finline-functions \
   -finline-limit=64 \
@@ -77,7 +78,9 @@
   -Wno-unused-but-set-variable \
   -Wno-unused-local-typedefs \
   -Wunused-but-set-parameter \
-  -Wunused-but-set-variable
+  -Wunused-but-set-variable \
+  -fdiagnostics-color \
+  -fdebug-prefix-map=/proc/self/cwd=
 
 # Clang flags for all host rules
 CLANG_CONFIG_HOST_EXTRA_ASFLAGS :=
@@ -85,6 +88,12 @@
 CLANG_CONFIG_HOST_EXTRA_CPPFLAGS :=
 CLANG_CONFIG_HOST_EXTRA_LDFLAGS :=
 
+# Clang flags for all host cross rules
+CLANG_CONFIG_HOST_CROSS_EXTRA_ASFLAGS :=
+CLANG_CONFIG_HOST_CROSS_EXTRA_CFLAGS :=
+CLANG_CONFIG_HOST_CROSS_EXTRA_CPPFLAGS :=
+CLANG_CONFIG_HOST_CROSS_EXTRA_LDFLAGS :=
+
 # Clang flags for all target rules
 CLANG_CONFIG_TARGET_EXTRA_ASFLAGS :=
 CLANG_CONFIG_TARGET_EXTRA_CFLAGS := -nostdlibinc
@@ -127,6 +136,10 @@
 include $(BUILD_SYSTEM)/clang/HOST_$(HOST_2ND_ARCH).mk
 endif
 
+ifdef HOST_CROSS_OS
+include $(BUILD_SYSTEM)/clang/HOST_CROSS_$(HOST_CROSS_OS).mk
+endif
+
 # TARGET config
 clang_2nd_arch_prefix :=
 include $(BUILD_SYSTEM)/clang/TARGET_$(TARGET_ARCH).mk
@@ -140,7 +153,7 @@
 ADDRESS_SANITIZER_CONFIG_EXTRA_CFLAGS := -fno-omit-frame-pointer
 ADDRESS_SANITIZER_CONFIG_EXTRA_LDFLAGS := -Wl,-u,__asan_preinit
 
-ADDRESS_SANITIZER_CONFIG_EXTRA_SHARED_LIBRARIES := libdl
+ADDRESS_SANITIZER_CONFIG_EXTRA_SHARED_LIBRARIES :=
 ADDRESS_SANITIZER_CONFIG_EXTRA_STATIC_LIBRARIES := libasan
 
 # This allows us to use the superset of functionality that compiler-rt
diff --git a/core/clang/mips.mk b/core/clang/mips.mk
index 08daf40..4a8f812 100644
--- a/core/clang/mips.mk
+++ b/core/clang/mips.mk
@@ -12,8 +12,14 @@
   -frerun-cse-after-loop \
   -frename-registers \
   -msynci \
+  -mno-synci \
   -mno-fused-madd
 
+# Temporary workaround for Mips clang++ problem,  creates
+#   relocated ptrs in read-only pic .gcc_exception_table;
+#   permanent fix pending at http://reviews.llvm.org/D9669
+CLANG_CONFIG_mips_UNKNOWN_CFLAGS += -Wl,--warn-shared-textrel
+
 # We don't have any mips flags to substitute yet.
 define subst-clang-incompatible-mips-flags
   $(1)
diff --git a/core/clang/mips64.mk b/core/clang/mips64.mk
index 612175c..1b72e05 100644
--- a/core/clang/mips64.mk
+++ b/core/clang/mips64.mk
@@ -12,8 +12,14 @@
   -frerun-cse-after-loop \
   -frename-registers \
   -msynci \
+  -mno-synci \
   -mno-fused-madd
 
+# Temporary workaround for Mips clang++ problem creating
+#   relocated ptrs in read-only pic .gcc_exception_table;
+#   permanent fix pending at http://reviews.llvm.org/D9669
+CLANG_CONFIG_mips64_UNKNOWN_CFLAGS += -Wl,--warn-shared-textrel
+
 # We don't have any mips64 flags to substitute yet.
 define subst-clang-incompatible-mips64-flags
   $(1)
diff --git a/core/cleanbuild.mk b/core/cleanbuild.mk
index 801a292..7885644 100644
--- a/core/cleanbuild.mk
+++ b/core/cleanbuild.mk
@@ -54,6 +54,7 @@
 # can have permission to touch it.
 include $(BUILD_SYSTEM)/cleanspec.mk
 INTERNAL_CLEAN_BUILD_VERSION := $(strip $(INTERNAL_CLEAN_BUILD_VERSION))
+INTERNAL_CLEAN_STEPS := $(strip $(INTERNAL_CLEAN_STEPS))
 
 # If the clean_steps.mk file is missing (usually after a clean build)
 # then we won't do anything.
@@ -105,11 +106,18 @@
   _crs_new_cmd :=
   steps :=
 endif
-CURRENT_CLEAN_BUILD_VERSION :=
-CURRENT_CLEAN_STEPS :=
 
 # Write the new state to the file.
 #
+rewrite_clean_steps_file :=
+ifneq ($(CURRENT_CLEAN_BUILD_VERSION)-$(CURRENT_CLEAN_STEPS),$(INTERNAL_CLEAN_BUILD_VERSION)-$(INTERNAL_CLEAN_STEPS))
+rewrite_clean_steps_file := true
+endif
+ifeq ($(wildcard $(clean_steps_file)),)
+# This is the first build.
+rewrite_clean_steps_file := true
+endif
+ifeq ($(rewrite_clean_steps_file),true)
 $(shell \
   mkdir -p $(dir $(clean_steps_file)) && \
   echo "CURRENT_CLEAN_BUILD_VERSION := $(INTERNAL_CLEAN_BUILD_VERSION)" > \
@@ -117,8 +125,12 @@
   echo "CURRENT_CLEAN_STEPS := $(INTERNAL_CLEAN_STEPS)" >> \
       $(clean_steps_file) \
  )
+endif
 
+CURRENT_CLEAN_BUILD_VERSION :=
+CURRENT_CLEAN_STEPS :=
 clean_steps_file :=
+rewrite_clean_steps_file :=
 INTERNAL_CLEAN_STEPS :=
 INTERNAL_CLEAN_BUILD_VERSION :=
 
@@ -137,15 +149,23 @@
 
 current_build_config := \
     $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)-{$(aapt_config_list)}
+current_sanitize_target := $(strip $(SANITIZE_TARGET))
+ifeq (,$(current_sanitize_target))
+  current_sanitize_target := false
+endif
 aapt_config_list :=
 force_installclean := false
+force_objclean := false
 
 # Read the current state from the file, if present.
 # Will set PREVIOUS_BUILD_CONFIG.
 #
 PREVIOUS_BUILD_CONFIG :=
+PREVIOUS_SANITIZE_TARGET :=
 -include $(previous_build_config_file)
 PREVIOUS_BUILD_CONFIG := $(strip $(PREVIOUS_BUILD_CONFIG))
+PREVIOUS_SANITIZE_TARGET := $(strip $(PREVIOUS_SANITIZE_TARGET))
+
 ifdef PREVIOUS_BUILD_CONFIG
   ifneq "$(current_build_config)" "$(PREVIOUS_BUILD_CONFIG)"
     $(info *** Build configuration changed: "$(PREVIOUS_BUILD_CONFIG)" -> "$(current_build_config)")
@@ -156,15 +176,27 @@
     endif
   endif
 endif  # else, this is the first build, so no need to clean.
-PREVIOUS_BUILD_CONFIG :=
+
+ifdef PREVIOUS_SANITIZE_TARGET
+  ifneq "$(current_sanitize_target)" "$(PREVIOUS_SANITIZE_TARGET)"
+    $(info *** SANITIZE_TARGET changed: "$(PREVIOUS_SANITIZE_TARGET)" -> "$(current_sanitize_target)")
+    force_objclean := true
+  endif
+endif  # else, this is the first build, so no need to clean.
 
 # Write the new state to the file.
 #
+ifneq ($(PREVIOUS_BUILD_CONFIG)-$(PREVIOUS_SANITIZE_TARGET),$(current_build_config)-$(current_sanitize_target))
 $(shell \
   mkdir -p $(dir $(previous_build_config_file)) && \
   echo "PREVIOUS_BUILD_CONFIG := $(current_build_config)" > \
+      $(previous_build_config_file) && \
+  echo "PREVIOUS_SANITIZE_TARGET := $(current_sanitize_target)" >> \
       $(previous_build_config_file) \
  )
+endif
+PREVIOUS_BUILD_CONFIG :=
+PREVIOUS_SANITIZE_TARGET :=
 previous_build_config_file :=
 current_build_config :=
 
@@ -221,6 +253,12 @@
 	$(PRODUCT_OUT)/data-qemu/* \
 	$(PRODUCT_OUT)/userdata-qemu.img
 
+# The files/dirs to delete during an objclean, which removes any files
+# in the staging and emulator data partitions.
+objclean_files := \
+	$(TARGET_OUT_INTERMEDIATES) \
+	$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES)
+
 # make sure *_OUT is set so that we won't result in deleting random parts
 # of the filesystem.
 ifneq (2,$(words $(HOST_OUT) $(PRODUCT_OUT)))
@@ -240,6 +278,12 @@
 	$(hide) rm -rf $(FILES)
 	@echo "Deleted images and staging directories."
 
+.PHONY: objclean
+objclean: FILES := $(objclean_files)
+objclean:
+	$(hide) rm -rf $(FILES)
+	@echo "Deleted images and staging directories."
+
 ifeq "$(force_installclean)" "true"
   $(info *** Forcing "make installclean"...)
   $(info *** rm -rf $(dataclean_files) $(installclean_files))
@@ -248,6 +292,14 @@
 endif
 force_installclean :=
 
+ifeq "$(force_objclean)" "true"
+  $(info *** Forcing cleanup of intermediate files...)
+  $(info *** rm -rf $(objclean_files))
+  $(shell rm -rf $(objclean_files))
+  $(info *** Done with the cleaning, now starting the real build.)
+endif
+force_objclean :=
+
 ###########################################################
 # Clean build tools when swithcing between prebuilt host tools (such as in
 # apps_only build) and tools built from source (platform build).
@@ -267,10 +319,12 @@
 endif # else, this is the first build, so no need to clean.
 
 # Write the new state to the file.
+ifneq ($(PREVIOUS_PREBUILT_TOOLS),$(current_prebuilt_tools))
 $(shell \
   mkdir -p $(dir $(previous_prebuilt_tools_config_file)) && \
   echo "PREVIOUS_PREBUILT_TOOLS:=$(current_prebuilt_tools)" > \
     $(previous_prebuilt_tools_config_file))
+endif
 
 ifeq ($(force_tools_clean),true)
 # For this list of prebuilt tools, see prebuilts/sdk/tools/Android.mk.
diff --git a/core/clear_vars.mk b/core/clear_vars.mk
index 076fb78..6cf344f 100644
--- a/core/clear_vars.mk
+++ b/core/clear_vars.mk
@@ -28,6 +28,7 @@
 LOCAL_ACP_UNAVAILABLE:=
 LOCAL_MODULE_TAGS:=
 LOCAL_SRC_FILES:=
+LOCAL_SRC_FILES_EXCLUDE:=
 LOCAL_PREBUILT_OBJ_FILES:=
 LOCAL_STATIC_JAVA_LIBRARIES:=
 LOCAL_STATIC_JAVA_AAR_LIBRARIES:=
@@ -108,8 +109,6 @@
 LOCAL_ALLOW_UNDEFINED_SYMBOLS:=
 LOCAL_DX_FLAGS:=
 LOCAL_JACK_ENABLED:=$(DEFAULT_JACK_ENABLED) # '' (ie disabled), disabled, full, incremental
-LOCAL_JACK_VM_ARGS := $(DEFAULT_JACK_VM_ARGS)
-LOCAL_JACK_EXTRA_ARGS := $(DEFAULT_JACK_EXTRA_ARGS)
 LOCAL_JACK_FLAGS:=
 LOCAL_JILL_FLAGS:=
 LOCAL_CERTIFICATE:=
@@ -132,7 +131,6 @@
 LOCAL_RENDERSCRIPT_CC:=
 LOCAL_RENDERSCRIPT_COMPATIBILITY:=
 LOCAL_RENDERSCRIPT_FLAGS:=
-LOCAL_RENDERSCRIPT_SKIP_INSTALL:=
 LOCAL_RENDERSCRIPT_TARGET_API:=
 LOCAL_DEX_PREOPT:= # '',true,false,nostripping
 LOCAL_DEX_PREOPT_IMAGE_LOCATION:=
@@ -150,11 +148,9 @@
 LOCAL_CTS_TEST_PACKAGE:=
 LOCAL_CTS_TEST_RUNNER:=
 LOCAL_CLANG:=
-LOCAL_ADDRESS_SANITIZER:=
 LOCAL_JAR_EXCLUDE_FILES:=
 LOCAL_JAR_PACKAGES:=
 LOCAL_JAR_EXCLUDE_PACKAGES:=
-LOCAL_LINT_FLAGS:=
 LOCAL_SOURCE_FILES_ALL_GENERATED:= # '',true
 # Don't delete the META_INF dir when merging static Java libraries.
 LOCAL_DONT_DELETE_JAR_META_INF:=
@@ -163,7 +159,6 @@
 LOCAL_PREBUILT_MODULE_FILE:=
 LOCAL_POST_LINK_CMD:=
 LOCAL_POST_INSTALL_CMD:=
-LOCAL_DIST_BUNDLED_BINARIES:=
 LOCAL_HAL_STATIC_LIBRARIES:=
 LOCAL_RMTYPEDEFS:=
 LOCAL_NO_SYNTAX_CHECK:=
@@ -175,15 +170,27 @@
 LOCAL_MODULE_UNSUPPORTED_TARGET_ARCH:=
 LOCAL_MODULE_UNSUPPORTED_TARGET_ARCH_WARN:=
 LOCAL_MODULE_HOST_ARCH:=
+LOCAL_MODULE_HOST_ARCH_WARN:=
+LOCAL_MODULE_UNSUPPORTED_HOST_ARCH:=
+LOCAL_MODULE_UNSUPPORTED_HOST_ARCH_WARN:=
+LOCAL_MODULE_HOST_CROSS_ARCH:=
+LOCAL_MODULE_HOST_CROSS_ARCH_WARN:=
+LOCAL_MODULE_UNSUPPORTED_HOST_CROSS_ARCH:=
+LOCAL_MODULE_UNSUPPORTED_HOST_CROSS_ARCH_WARN:=
 LOCAL_NO_FPIE :=
 LOCAL_CXX_STL := default
 LOCAL_NATIVE_COVERAGE :=
 LOCAL_DPI_VARIANTS:=
 LOCAL_DPI_FILE_STEM:=
 LOCAL_SANITIZE:=
+LOCAL_SANITIZE_RECOVER:=
+LOCAL_DBUS_PROXY_PREFIX:=
+LOCAL_INIT_RC:=
+LOCAL_MODULE_HOST_OS:=
 
 # arch specific variables
 LOCAL_SRC_FILES_$(TARGET_ARCH):=
+LOCAL_SRC_FILES_EXCLUDE_$(TARGET_ARCH):=
 LOCAL_CFLAGS_$(TARGET_ARCH):=
 LOCAL_CLANG_CFLAGS_$(TARGET_ARCH):=
 LOCAL_CPPFLAGS_$(TARGET_ARCH):=
@@ -191,7 +198,6 @@
 LOCAL_C_INCLUDES_$(TARGET_ARCH):=
 LOCAL_ASFLAGS_$(TARGET_ARCH):=
 LOCAL_CLANG_ASFLAGS_$(TARGET_ARCH):=
-LOCAL_NO_CRT_$(TARGET_ARCH):=
 LOCAL_LDFLAGS_$(TARGET_ARCH):=
 LOCAL_CLANG_LDFLAGS_$(TARGET_ARCH):=
 LOCAL_SHARED_LIBRARIES_$(TARGET_ARCH):=
@@ -203,6 +209,7 @@
 LOCAL_PREBUILT_JNI_LIBS_$(TARGET_ARCH):=
 ifdef TARGET_2ND_ARCH
 LOCAL_SRC_FILES_$(TARGET_2ND_ARCH):=
+LOCAL_SRC_FILES_EXCLUDE_$(TARGET_2ND_ARCH):=
 LOCAL_CFLAGS_$(TARGET_2ND_ARCH):=
 LOCAL_CLANG_CFLAGS_$(TARGET_2ND_ARCH):=
 LOCAL_CPPFLAGS_$(TARGET_2ND_ARCH):=
@@ -210,7 +217,6 @@
 LOCAL_C_INCLUDES_$(TARGET_2ND_ARCH):=
 LOCAL_ASFLAGS_$(TARGET_2ND_ARCH):=
 LOCAL_CLANG_ASFLAGS_$(TARGET_2ND_ARCH):=
-LOCAL_NO_CRT_$(TARGET_2ND_ARCH):=
 LOCAL_LDFLAGS_$(TARGET_2ND_ARCH):=
 LOCAL_CLANG_LDFLAGS_$(TARGET_2ND_ARCH):=
 LOCAL_SHARED_LIBRARIES_$(TARGET_2ND_ARCH):=
@@ -222,6 +228,7 @@
 LOCAL_PREBUILT_JNI_LIBS_$(TARGET_2ND_ARCH):=
 endif
 LOCAL_SRC_FILES_$(HOST_ARCH):=
+LOCAL_SRC_FILES_EXCLUDE_$(HOST_ARCH):=
 LOCAL_CFLAGS_$(HOST_ARCH):=
 LOCAL_CLANG_CFLAGS_$(HOST_ARCH):=
 LOCAL_CPPFLAGS_$(HOST_ARCH):=
@@ -229,7 +236,6 @@
 LOCAL_C_INCLUDES_$(HOST_ARCH):=
 LOCAL_ASFLAGS_$(HOST_ARCH):=
 LOCAL_CLANG_ASFLAGS_$(HOST_ARCH):=
-LOCAL_NO_CRT_$(HOST_ARCH):=
 LOCAL_LDFLAGS_$(HOST_ARCH):=
 LOCAL_CLANG_LDFLAGS_$(HOST_ARCH):=
 LOCAL_SHARED_LIBRARIES_$(HOST_ARCH):=
@@ -240,6 +246,7 @@
 LOCAL_CLANG_$(HOST_ARCH):=
 ifdef HOST_2ND_ARCH
 LOCAL_SRC_FILES_$(HOST_2ND_ARCH):=
+LOCAL_SRC_FILES_EXCLUDE_$(HOST_2ND_ARCH):=
 LOCAL_CFLAGS_$(HOST_2ND_ARCH):=
 LOCAL_CLANG_CFLAGS_$(HOST_2ND_ARCH):=
 LOCAL_CPPFLAGS_$(HOST_2ND_ARCH):=
@@ -247,7 +254,6 @@
 LOCAL_C_INCLUDES_$(HOST_2ND_ARCH):=
 LOCAL_ASFLAGS_$(HOST_2ND_ARCH):=
 LOCAL_CLANG_ASFLAGS_$(HOST_2ND_ARCH):=
-LOCAL_NO_CRT_$(HOST_2ND_ARCH):=
 LOCAL_LDFLAGS_$(HOST_2ND_ARCH):=
 LOCAL_CLANG_LDFLAGS_$(HOST_2ND_ARCH):=
 LOCAL_SHARED_LIBRARIES_$(HOST_2ND_ARCH):=
@@ -258,8 +264,44 @@
 LOCAL_CLANG_$(HOST_2ND_ARCH):=
 endif
 
+LOCAL_SRC_FILES_$(HOST_OS):=
+LOCAL_STATIC_LIBRARIES_$(HOST_OS):=
+LOCAL_SHARED_LIBRARIES_$(HOST_OS):=
+LOCAL_CFLAGS_$(HOST_OS):=
+LOCAL_CPPFLAGS_$(HOST_OS):=
+LOCAL_LDFLAGS_$(HOST_OS):=
+LOCAL_LDLIBS_$(HOST_OS):=
+LOCAL_ASFLAGS_$(HOST_OS):=
+LOCAL_C_INCLUDES_$(HOST_OS):=
+LOCAL_GENERATED_SOURCES_$(HOST_OS):=
+LOCAL_REQUIRED_MODULES_$(HOST_OS):=
+
+ifdef HOST_CROSS_OS
+LOCAL_SRC_FILES_$(HOST_CROSS_OS):=
+LOCAL_STATIC_LIBRARIES_$(HOST_CROSS_OS):=
+LOCAL_SHARED_LIBRARIES_$(HOST_CROSS_OS):=
+LOCAL_CFLAGS_$(HOST_CROSS_OS):=
+LOCAL_CPPFLAGS_$(HOST_CROSS_OS):=
+LOCAL_LDFLAGS_$(HOST_CROSS_OS):=
+LOCAL_LDLIBS_$(HOST_CROSS_OS):=
+LOCAL_ASFLAGS_$(HOST_CROSS_OS):=
+LOCAL_C_INCLUDES_$(HOST_CROSS_OS):=
+LOCAL_GENERATED_SOURCES_$(HOST_CROSS_OS):=
+LOCAL_REQUIRED_MODULES_$(HOST_CROSS_OS):=
+endif
+
+LOCAL_SRC_FILES_$(HOST_OS)_$(HOST_ARCH):=
+ifdef HOST_2ND_ARCH
+LOCAL_SRC_FILES_$(HOST_OS)_$(HOST_2ND_ARCH):=
+endif
+ifdef HOST_CROSS_OS
+LOCAL_SRC_FILES_$(HOST_CROSS_OS)_$(HOST_CROSS_ARCH):=
+endif
+
 LOCAL_SRC_FILES_32:=
 LOCAL_SRC_FILES_64:=
+LOCAL_SRC_FILES_EXCLUDE_32:=
+LOCAL_SRC_FILES_EXCLUDE_64:=
 LOCAL_SHARED_LIBRARIES_32:=
 LOCAL_SHARED_LIBRARIES_64:=
 LOCAL_STATIC_LIBRARIES_32:=
@@ -292,6 +334,8 @@
 LOCAL_MODULE_STEM_64:=
 LOCAL_CLANG_32:=
 LOCAL_CLANG_64:=
+LOCAL_INIT_RC_32:=
+LOCAL_INIT_RC_64:=
 
 # Trim MAKEFILE_LIST so that $(call my-dir) doesn't need to
 # iterate over thousands of entries every time.
diff --git a/core/combo/HOST_CROSS_windows-x86.mk b/core/combo/HOST_CROSS_windows-x86.mk
new file mode 100644
index 0000000..1ac1059
--- /dev/null
+++ b/core/combo/HOST_CROSS_windows-x86.mk
@@ -0,0 +1,65 @@
+#
+# Copyright (C) 2006 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Settings to use MinGW as a cross-compiler under Linux
+# Included by combo/select.make
+
+$(combo_var_prefix)GLOBAL_CFLAGS += -DUSE_MINGW -DWIN32_LEAN_AND_MEAN
+$(combo_var_prefix)GLOBAL_CFLAGS += -Wno-unused-parameter
+$(combo_var_prefix)GLOBAL_CFLAGS += --sysroot=prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/x86_64-w64-mingw32
+$(combo_var_prefix)GLOBAL_CFLAGS += -m32
+$(combo_var_prefix)GLOBAL_LDFLAGS += -m32
+TOOLS_PREFIX := prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/bin/x86_64-w64-mingw32-
+$(combo_var_prefix)C_INCLUDES += prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/x86_64-w64-mingw32/include
+$(combo_var_prefix)C_INCLUDES += prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/lib/gcc/x86_64-w64-mingw32/4.8.3/include
+$(combo_var_prefix)GLOBAL_LD_DIRS += -Lprebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/x86_64-w64-mingw32/lib32
+
+# Workaround differences in inttypes.h between host and target.
+# See bug 12708004.
+$(combo_var_prefix)GLOBAL_CFLAGS += -D__STDC_FORMAT_MACROS -D__STDC_CONSTANT_MACROS
+# Use C99-compliant printf functions (%zd).
+$(combo_var_prefix)GLOBAL_CFLAGS += -D__USE_MINGW_ANSI_STDIO=1
+# Admit to using >= Win2K. Both are needed because of <_mingw.h>.
+$(combo_var_prefix)GLOBAL_CFLAGS += -D_WIN32_WINNT=0x0500 -DWINVER=0x0500
+# Get 64-bit off_t and related functions.
+$(combo_var_prefix)GLOBAL_CFLAGS += -D_FILE_OFFSET_BITS=64
+
+$(combo_var_prefix)CC := $(TOOLS_PREFIX)gcc
+$(combo_var_prefix)CXX := $(TOOLS_PREFIX)g++
+$(combo_var_prefix)AR := $(TOOLS_PREFIX)ar
+$(combo_var_prefix)NM := $(TOOLS_PREFIX)nm
+$(combo_var_prefix)OBJDUMP := $(TOOLS_PREFIX)objdump
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(hide) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OBJDUMP) -x $(1) | grep "^Name" | cut -f3 -d" " > $(2)
+$(hide) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)NM) -g -f p $(1) | cut -f1-2 -d" " >> $(2)
+endef
+
+$(combo_var_prefix)GLOBAL_LDFLAGS += \
+    --enable-stdcall-fixup
+
+ifneq ($(strip $(BUILD_HOST_static)),)
+# Statically-linked binaries are desirable for sandboxed environment
+$(combo_var_prefix)GLOBAL_LDFLAGS += -static
+endif # BUILD_HOST_static
+
+$(combo_var_prefix)SHLIB_SUFFIX := .dll
+$(combo_var_prefix)EXECUTABLE_SUFFIX := .exe
+
+$(combo_var_prefix)IS_64_BIT :=
+
+# The mingw gcc is 4.8, 4.9 is required for color diagnostics
+$(combo_var_prefix)UNKNOWN_CFLAGS := -fdiagnostics-color
diff --git a/core/combo/HOST_darwin-x86.mk b/core/combo/HOST_darwin-x86.mk
index e77fd21..fc56e52 100644
--- a/core/combo/HOST_darwin-x86.mk
+++ b/core/combo/HOST_darwin-x86.mk
@@ -36,6 +36,10 @@
 $(combo_2nd_arch_prefix)HOST_CC  := $($(combo_2nd_arch_prefix)HOST_TOOLCHAIN_PREFIX)-gcc
 $(combo_2nd_arch_prefix)HOST_CXX := $($(combo_2nd_arch_prefix)HOST_TOOLCHAIN_PREFIX)-g++
 
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_macho,$(1),$(2))
+endef
+
 # gcc location for clang; to be updated when clang is updated
 # HOST_TOOLCHAIN_ROOT is a Darwin-specific define
 $(combo_2nd_arch_prefix)HOST_TOOLCHAIN_FOR_CLANG := $($(combo_2nd_arch_prefix)HOST_TOOLCHAIN_ROOT)
@@ -52,10 +56,6 @@
 $(combo_2nd_arch_prefix)HOST_SHLIB_SUFFIX := .dylib
 $(combo_2nd_arch_prefix)HOST_JNILIB_SUFFIX := .jnilib
 
-# TODO: add AndroidConfig.h for darwin-x86_64
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += \
-    -include $(call select-android-config-h,darwin-x86)
-
 $(combo_2nd_arch_prefix)HOST_GLOBAL_ARFLAGS := cqs
 
 ############################################################
diff --git a/core/combo/HOST_darwin-x86_64.mk b/core/combo/HOST_darwin-x86_64.mk
index 0efa78f..251455f 100644
--- a/core/combo/HOST_darwin-x86_64.mk
+++ b/core/combo/HOST_darwin-x86_64.mk
@@ -36,6 +36,10 @@
 HOST_CC  := $(HOST_TOOLCHAIN_PREFIX)-gcc
 HOST_CXX := $(HOST_TOOLCHAIN_PREFIX)-g++
 
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_macho,$(1),$(2))
+endef
+
 # gcc location for clang; to be updated when clang is updated
 # HOST_TOOLCHAIN_ROOT is a Darwin-specific define
 HOST_TOOLCHAIN_FOR_CLANG := $(HOST_TOOLCHAIN_ROOT)
@@ -52,9 +56,6 @@
 HOST_SHLIB_SUFFIX := .dylib
 HOST_JNILIB_SUFFIX := .jnilib
 
-HOST_GLOBAL_CFLAGS += \
-    -include $(call select-android-config-h,darwin-x86)
-
 HOST_GLOBAL_ARFLAGS := cqs
 
 # We Reuse the following functions with the same name from HOST_darwin-x86.mk:
diff --git a/core/combo/HOST_linux-x86.mk b/core/combo/HOST_linux-x86.mk
index 8eda6c0..b5efc71 100644
--- a/core/combo/HOST_linux-x86.mk
+++ b/core/combo/HOST_linux-x86.mk
@@ -23,9 +23,15 @@
 $(combo_2nd_arch_prefix)HOST_CC  := $($(combo_2nd_arch_prefix)HOST_TOOLCHAIN_PREFIX)gcc
 $(combo_2nd_arch_prefix)HOST_CXX := $($(combo_2nd_arch_prefix)HOST_TOOLCHAIN_PREFIX)g++
 $(combo_2nd_arch_prefix)HOST_AR  := $($(combo_2nd_arch_prefix)HOST_TOOLCHAIN_PREFIX)ar
+$(combo_2nd_arch_prefix)HOST_READELF  := $($(combo_2nd_arch_prefix)HOST_TOOLCHAIN_PREFIX)readelf
+$(combo_2nd_arch_prefix)HOST_NM  := $($(combo_2nd_arch_prefix)HOST_TOOLCHAIN_PREFIX)nm
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_elf,$(1),$(2))
+endef
 
 # gcc location for clang; to be updated when clang is updated
-$(combo_2nd_arch_prefix)HOST_TOOLCHAIN_FOR_CLANG := prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.15-4.8/
+$(combo_2nd_arch_prefix)HOST_TOOLCHAIN_FOR_CLANG := prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.15-4.8
 
 # We expect SSE3 floating point math.
 $(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -msse3 -mfpmath=sse -m32 -Wa,--noexecstack -march=prescott
@@ -38,15 +44,17 @@
 
 $(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -fPIC \
   -no-canonical-prefixes \
-  -include $(call select-android-config-h,linux-x86)
 
-# TODO: Set _FORTIFY_SOURCE=2. Bug 20558757.
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -fstack-protector
+$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fstack-protector
 
 # Workaround differences in inttypes.h between host and target.
 # See bug 12708004.
 $(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -D__STDC_FORMAT_MACROS -D__STDC_CONSTANT_MACROS
 
+# We build a 32-bit host art, and right now that also means building *all* host libraries
+# both 32- and 64-bit (whether art uses them or not --- 9d59f417767991246848c3e101cb27d2dfea5988).
+$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE=1
+
 $(combo_2nd_arch_prefix)HOST_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
 
 ############################################################
diff --git a/core/combo/HOST_linux-x86_64.mk b/core/combo/HOST_linux-x86_64.mk
index e268e41..9a77324 100644
--- a/core/combo/HOST_linux-x86_64.mk
+++ b/core/combo/HOST_linux-x86_64.mk
@@ -23,9 +23,15 @@
 HOST_CC  := $(HOST_TOOLCHAIN_PREFIX)gcc
 HOST_CXX := $(HOST_TOOLCHAIN_PREFIX)g++
 HOST_AR  := $(HOST_TOOLCHAIN_PREFIX)ar
+HOST_READELF  := $(HOST_TOOLCHAIN_PREFIX)readelf
+HOST_NM  := $(HOST_TOOLCHAIN_PREFIX)nm
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_elf,$(1),$(2))
+endef
 
 # gcc location for clang; to be updated when clang is updated
-HOST_TOOLCHAIN_FOR_CLANG := prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.15-4.8/
+HOST_TOOLCHAIN_FOR_CLANG := prebuilts/gcc/linux-x86/host/x86_64-linux-glibc2.15-4.8
 
 HOST_GLOBAL_CFLAGS += -m64 -Wa,--noexecstack
 HOST_GLOBAL_LDFLAGS += -m64 -Wl,-z,noexecstack -Wl,-z,relro -Wl,-z,now
@@ -35,13 +41,10 @@
 HOST_GLOBAL_LDFLAGS += -static
 endif # BUILD_HOST_static
 
-# TODO: Add AndroidConfig.h for linux-x86_64
 HOST_GLOBAL_CFLAGS += -fPIC \
   -no-canonical-prefixes \
-  -include $(call select-android-config-h,linux-x86)
 
-# TODO: Set _FORTIFY_SOURCE=2. Bug 20558757.
-HOST_GLOBAL_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=0 -fstack-protector
+HOST_GLOBAL_CFLAGS += -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 -fstack-protector
 
 # Workaround differences in inttypes.h between host and target.
 # See bug 12708004.
diff --git a/core/combo/HOST_windows-x86.mk b/core/combo/HOST_windows-x86.mk
deleted file mode 100644
index b71ac16..0000000
--- a/core/combo/HOST_windows-x86.mk
+++ /dev/null
@@ -1,86 +0,0 @@
-#
-# Copyright (C) 2006 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# Configuration for Linux on x86.
-# Included by combo/select.make
-
-# right now we get these from the environment, but we should
-# pick them from the tree somewhere
-TOOLS_PREFIX := #prebuilt/windows/host/bin/
-TOOLS_EXE_SUFFIX := .exe
-
-# Settings to use MinGW has a cross-compiler under Linux
-ifneq ($(findstring Linux,$(UNAME)),)
-ifdef USE_MINGW
-HOST_ACP_UNAVAILABLE := true
-TOOLS_EXE_SUFFIX :=
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -DUSE_MINGW -DWIN32_LEAN_AND_MEAN
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -Wno-unused-parameter
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += --sysroot=prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/x86_64-w64-mingw32
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -m32
-$(combo_2nd_arch_prefix)HOST_GLOBAL_LDFLAGS += -m32
-TOOLS_PREFIX := prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/bin/x86_64-w64-mingw32-
-$(combo_2nd_arch_prefix)HOST_C_INCLUDES += prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/x86_64-w64-mingw32/include
-$(combo_2nd_arch_prefix)HOST_C_INCLUDES += prebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/lib/gcc/x86_64-w64-mingw32/4.8.3/include
-$(combo_2nd_arch_prefix)HOST_GLOBAL_LD_DIRS += -Lprebuilts/gcc/linux-x86/host/x86_64-w64-mingw32-4.8/x86_64-w64-mingw32/lib32
-endif # USE_MINGW
-endif # Linux
-
-# Workaround differences in inttypes.h between host and target.
-# See bug 12708004.
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -D__STDC_FORMAT_MACROS -D__STDC_CONSTANT_MACROS -D__USE_MINGW_ANSI_STDIO
-
-$(combo_2nd_arch_prefix)HOST_CC := $(TOOLS_PREFIX)gcc$(TOOLS_EXE_SUFFIX)
-$(combo_2nd_arch_prefix)HOST_CXX := $(TOOLS_PREFIX)g++$(TOOLS_EXE_SUFFIX)
-$(combo_2nd_arch_prefix)HOST_AR := $(TOOLS_PREFIX)ar$(TOOLS_EXE_SUFFIX)
-
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += \
-    -include $(call select-android-config-h,windows)
-$(combo_2nd_arch_prefix)HOST_GLOBAL_LDFLAGS += \
-    --enable-stdcall-fixup
-
-ifneq ($(strip $(BUILD_HOST_static)),)
-# Statically-linked binaries are desirable for sandboxed environment
-$(combo_2nd_arch_prefix)HOST_GLOBAL_LDFLAGS += -static
-endif # BUILD_HOST_static
-
-# when building under Cygwin, ensure that we use Mingw compilation by default.
-# you can disable this (i.e. to generate Cygwin executables) by defining the
-# USE_CYGWIN variable in your environment, e.g.:
-#
-#   export USE_CYGWIN=1
-#
-# note that the -mno-cygwin flags are not needed when cross-compiling the
-# Windows host tools on Linux
-#
-ifneq ($(findstring CYGWIN,$(UNAME)),)
-ifeq ($(strip $(USE_CYGWIN)),)
-$(combo_2nd_arch_prefix)HOST_GLOBAL_CFLAGS += -mno-cygwin
-$(combo_2nd_arch_prefix)HOST_GLOBAL_LDFLAGS += -mno-cygwin -mconsole
-endif
-endif
-
-############################################################
-## Macros after this line are shared by the 64-bit config.
-
-HOST_SHLIB_SUFFIX := .dll
-HOST_EXECUTABLE_SUFFIX := .exe
-
-# $(1): The file to check
-# TODO: find out what format cygwin's stat(1) uses
-define get-file-size
-999999999
-endef
diff --git a/core/combo/HOST_windows-x86_64.mk b/core/combo/HOST_windows-x86_64.mk
deleted file mode 100644
index bd392ea..0000000
--- a/core/combo/HOST_windows-x86_64.mk
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# Copyright (C) 2006 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# Configuration for Windows on x86_64.
-# Included by combo/select.make
-
-# right now we get these from the environment, but we should
-# pick them from the tree somewhere
-TOOLS_PREFIX := #prebuilt/windows/host/bin/
-TOOLS_EXE_SUFFIX := .exe
-
-# Settings to use MinGW has a cross-compiler under Linux
-ifneq ($(findstring Linux,$(UNAME)),)
-ifdef USE_MINGW
-HOST_ACP_UNAVAILABLE := true
-TOOLS_EXE_SUFFIX :=
-HOST_GLOBAL_CFLAGS += -DUSE_MINGW
-TOOLS_PREFIX := /usr/bin/amd64-mingw32msvc-
-HOST_C_INCLUDES += /usr/lib/gcc/amd64-mingw32msvc/4.4.2/include
-HOST_GLOBAL_LD_DIRS += -L/usr/amd64-mingw32msvc/lib
-endif # USE_MINGW
-endif # Linux
-
-# Workaround differences in inttypes.h between host and target.
-# See bug 12708004.
-HOST_GLOBAL_CFLAGS += -D__STDC_FORMAT_MACROS -D__STDC_CONSTANT_MACROS -D__USE_MINGW_ANSI_STDIO
-
-HOST_CC := $(TOOLS_PREFIX)gcc$(TOOLS_EXE_SUFFIX)
-HOST_CXX := $(TOOLS_PREFIX)g++$(TOOLS_EXE_SUFFIX)
-HOST_AR := $(TOOLS_PREFIX)ar$(TOOLS_EXE_SUFFIX)
-
-HOST_GLOBAL_CFLAGS += -include $(call select-android-config-h,windows)
-HOST_GLOBAL_LDFLAGS += --enable-stdcall-fixup
-ifneq ($(strip $(BUILD_HOST_static)),)
-# Statically-linked binaries are desirable for sandboxed environment
-HOST_GLOBAL_LDFLAGS += -static
-endif # BUILD_HOST_static
-
-# when building under Cygwin, ensure that we use Mingw compilation by default.
-# you can disable this (i.e. to generate Cygwin executables) by defining the
-# USE_CYGWIN variable in your environment, e.g.:
-#
-#   export USE_CYGWIN=1
-#
-# note that the -mno-cygwin flags are not needed when cross-compiling the
-# Windows host tools on Linux
-#
-ifneq ($(findstring CYGWIN,$(UNAME)),)
-ifeq ($(strip $(USE_CYGWIN)),)
-HOST_GLOBAL_CFLAGS += -mno-cygwin
-HOST_GLOBAL_LDFLAGS += -mno-cygwin -mconsole
-endif
-endif
diff --git a/core/combo/TARGET_linux-arm.mk b/core/combo/TARGET_linux-arm.mk
index 3651c39..485e48c 100644
--- a/core/combo/TARGET_linux-arm.mk
+++ b/core/combo/TARGET_linux-arm.mk
@@ -20,8 +20,7 @@
 # You can set TARGET_ARCH_VARIANT to use an arch version other
 # than ARMv5TE. Each value should correspond to a file named
 # $(BUILD_COMBOS)/arch/<name>.mk which must contain
-# makefile variable definitions similar to the preprocessor
-# defines in build/core/combo/include/arch/<combo>/AndroidConfig.h. Their
+# makefile variable definitions. Their
 # purpose is to allow module Android.mk files to selectively compile
 # different versions of code based upon the funtionality and
 # instructions available in a given architecture version.
@@ -57,13 +56,18 @@
 $(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX := $($(combo_2nd_arch_prefix)TARGET_TOOLCHAIN_ROOT)/bin/arm-linux-androideabi-
 endif
 
-$(combo_2nd_arch_prefix)TARGET_CC := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_CXX := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)g++$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_AR := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_OBJCOPY := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_LD := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_READELF := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)readelf$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_STRIP := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)strip$(HOST_EXECUTABLE_SUFFIX)
+$(combo_2nd_arch_prefix)TARGET_CC := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)gcc
+$(combo_2nd_arch_prefix)TARGET_CXX := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)g++
+$(combo_2nd_arch_prefix)TARGET_AR := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ar
+$(combo_2nd_arch_prefix)TARGET_OBJCOPY := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)objcopy
+$(combo_2nd_arch_prefix)TARGET_LD := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ld
+$(combo_2nd_arch_prefix)TARGET_READELF := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)readelf
+$(combo_2nd_arch_prefix)TARGET_STRIP := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)strip
+$(combo_2nd_arch_prefix)TARGET_NM := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)nm
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_elf,$(1),$(2))
+endef
 
 $(combo_2nd_arch_prefix)TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
 
@@ -92,8 +96,6 @@
   $(combo_2nd_arch_prefix)TARGET_thumb_CFLAGS += -marm -fno-omit-frame-pointer
 endif
 
-android_config_h := $(call select-android-config-h,linux-arm)
-
 $(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS += \
 			-msoft-float \
 			-ffunction-sections \
@@ -107,8 +109,6 @@
 			-no-canonical-prefixes \
 			-fno-canonical-system-headers \
 			$(arch_variant_cflags) \
-			-include $(android_config_h) \
-			-I $(dir $(android_config_h))
 
 # The "-Wunused-but-set-variable" option often breaks projects that enable
 # "-Wall -Werror" due to a commom idiom "ALOGV(mesg)" where ALOGV is turned
@@ -171,6 +171,7 @@
 endif
 
 KERNEL_HEADERS_COMMON := $(libc_root)/kernel/uapi
+KERNEL_HEADERS_COMMON += $(libc_root)/kernel/common
 KERNEL_HEADERS_ARCH   := $(libc_root)/kernel/uapi/asm-$(TARGET_$(combo_2nd_arch_prefix)ARCH)
 KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
 
@@ -190,6 +191,4 @@
 
 $(combo_2nd_arch_prefix)TARGET_PACK_MODULE_RELOCATIONS := true
 
-$(combo_2nd_arch_prefix)TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libm
-
 $(combo_2nd_arch_prefix)TARGET_LINKER := /system/bin/linker
diff --git a/core/combo/TARGET_linux-arm64.mk b/core/combo/TARGET_linux-arm64.mk
index 3acddc5..1eb3240 100644
--- a/core/combo/TARGET_linux-arm64.mk
+++ b/core/combo/TARGET_linux-arm64.mk
@@ -20,8 +20,7 @@
 # You can set TARGET_ARCH_VARIANT to use an arch version other
 # than ARMv5TE. Each value should correspond to a file named
 # $(BUILD_COMBOS)/arch/<name>.mk which must contain
-# makefile variable definitions similar to the preprocessor
-# defines in build/core/combo/include/arch/<combo>/AndroidConfig.h. Their
+# makefile variable definitions. Their
 # purpose is to allow module Android.mk files to selectively compile
 # different versions of code based upon the funtionality and
 # instructions available in a given architecture version.
@@ -57,21 +56,24 @@
 TARGET_TOOLS_PREFIX := $(TARGET_TOOLCHAIN_ROOT)/bin/aarch64-linux-android-
 endif
 
-TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
-TARGET_CXX := $(TARGET_TOOLS_PREFIX)g++$(HOST_EXECUTABLE_SUFFIX)
-TARGET_AR := $(TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
-TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
-TARGET_LD := $(TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
-TARGET_READELF := $(TARGET_TOOLS_PREFIX)readelf$(HOST_EXECUTABLE_SUFFIX)
-TARGET_STRIP := $(TARGET_TOOLS_PREFIX)strip$(HOST_EXECUTABLE_SUFFIX)
+TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc
+TARGET_CXX := $(TARGET_TOOLS_PREFIX)g++
+TARGET_AR := $(TARGET_TOOLS_PREFIX)ar
+TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy
+TARGET_LD := $(TARGET_TOOLS_PREFIX)ld
+TARGET_READELF := $(TARGET_TOOLS_PREFIX)readelf
+TARGET_STRIP := $(TARGET_TOOLS_PREFIX)strip
+TARGET_NM := $(TARGET_TOOLS_PREFIX)nm
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_elf,$(1),$(2))
+endef
 
 TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
 
 TARGET_GLOBAL_CFLAGS += \
     -fno-strict-aliasing \
 
-android_config_h := $(call select-android-config-h,linux-arm64)
-
 TARGET_GLOBAL_CFLAGS += \
 			-fstack-protector \
 			-ffunction-sections \
@@ -84,8 +86,6 @@
 			-no-canonical-prefixes \
 			-fno-canonical-system-headers \
 			$(arch_variant_cflags) \
-			-include $(android_config_h) \
-			-I $(dir $(android_config_h))
 
 # Help catch common 32/64-bit errors.
 TARGET_GLOBAL_CFLAGS += \
@@ -142,6 +142,7 @@
 	-print-file-name=libgcov.a)
 
 KERNEL_HEADERS_COMMON := $(libc_root)/kernel/uapi
+KERNEL_HEADERS_COMMON += $(libc_root)/kernel/common
 KERNEL_HEADERS_ARCH   := $(libc_root)/kernel/uapi/asm-$(TARGET_ARCH)
 KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
 
@@ -161,6 +162,4 @@
 
 TARGET_PACK_MODULE_RELOCATIONS := true
 
-TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libm
-
 TARGET_LINKER := /system/bin/linker64
diff --git a/core/combo/TARGET_linux-mips.mk b/core/combo/TARGET_linux-mips.mk
index 29e49fb..be05302 100644
--- a/core/combo/TARGET_linux-mips.mk
+++ b/core/combo/TARGET_linux-mips.mk
@@ -20,8 +20,7 @@
 # You can set TARGET_ARCH_VARIANT to use an arch version other
 # than mips32r2-fp. Each value should correspond to a file named
 # $(BUILD_COMBOS)/arch/<name>.mk which must contain
-# makefile variable definitions similar to the preprocessor
-# defines in build/core/combo/include/arch/<combo>/AndroidConfig.h. Their
+# makefile variable definitions. Their
 # purpose is to allow module Android.mk files to selectively compile
 # different versions of code based upon the funtionality and
 # instructions available in a given architecture version.
@@ -57,13 +56,18 @@
 $(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX := $($(combo_2nd_arch_prefix)TARGET_TOOLCHAIN_ROOT)/bin/mips64el-linux-android-
 endif
 
-$(combo_2nd_arch_prefix)TARGET_CC := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_CXX := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)g++$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_AR := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_OBJCOPY := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_LD := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_READELF := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)readelf$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_STRIP := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)strip$(HOST_EXECUTABLE_SUFFIX)
+$(combo_2nd_arch_prefix)TARGET_CC := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)gcc
+$(combo_2nd_arch_prefix)TARGET_CXX := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)g++
+$(combo_2nd_arch_prefix)TARGET_AR := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ar
+$(combo_2nd_arch_prefix)TARGET_OBJCOPY := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)objcopy
+$(combo_2nd_arch_prefix)TARGET_LD := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ld
+$(combo_2nd_arch_prefix)TARGET_READELF := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)readelf
+$(combo_2nd_arch_prefix)TARGET_STRIP := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)strip
+$(combo_2nd_arch_prefix)TARGET_NM := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)nm
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_elf,$(1),$(2))
+endef
 
 $(combo_2nd_arch_prefix)TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
 
@@ -79,8 +83,6 @@
   TARGET_mips_CFLAGS += -fno-omit-frame-pointer
 endif
 
-android_config_h := $(call select-android-config-h,linux-mips)
-
 $(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS += \
 			$(TARGET_mips_CFLAGS) \
 			-U__unix -U__unix__ -Umips \
@@ -93,8 +95,6 @@
 			-no-canonical-prefixes \
 			-fno-canonical-system-headers \
 			$(arch_variant_cflags) \
-			-include $(android_config_h) \
-			-I $(dir $(android_config_h))
 
 ifneq ($(ARCH_MIPS_PAGE_SHIFT),)
 $(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS += -DPAGE_SHIFT=$(ARCH_MIPS_PAGE_SHIFT)
@@ -145,6 +145,7 @@
 endif
 
 KERNEL_HEADERS_COMMON := $(libc_root)/kernel/uapi
+KERNEL_HEADERS_COMMON += $(libc_root)/kernel/common
 KERNEL_HEADERS_ARCH   := $(libc_root)/kernel/uapi/asm-mips # mips covers both mips and mips64.
 KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
 
@@ -164,6 +165,4 @@
 
 $(combo_2nd_arch_prefix)TARGET_PACK_MODULE_RELOCATIONS := true
 
-$(combo_2nd_arch_prefix)TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libm
-
 $(combo_2nd_arch_prefix)TARGET_LINKER := /system/bin/linker
diff --git a/core/combo/TARGET_linux-mips64.mk b/core/combo/TARGET_linux-mips64.mk
index b34b7a6..9704b6b 100644
--- a/core/combo/TARGET_linux-mips64.mk
+++ b/core/combo/TARGET_linux-mips64.mk
@@ -20,8 +20,7 @@
 # You can set TARGET_ARCH_VARIANT to use an arch version other
 # than mips64r6. Each value should correspond to a file named
 # $(BUILD_COMBOS)/arch/<name>.mk which must contain
-# makefile variable definitions similar to the preprocessor
-# defines in build/core/combo/include/arch/<combo>/AndroidConfig.h. Their
+# makefile variable definitions. Their
 # purpose is to allow module Android.mk files to selectively compile
 # different versions of code based upon the funtionality and
 # instructions available in a given architecture version.
@@ -57,13 +56,18 @@
 TARGET_TOOLS_PREFIX := $(TARGET_TOOLCHAIN_ROOT)/bin/mips64el-linux-android-
 endif
 
-TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
-TARGET_CXX := $(TARGET_TOOLS_PREFIX)g++$(HOST_EXECUTABLE_SUFFIX)
-TARGET_AR := $(TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
-TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
-TARGET_LD := $(TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
-TARGET_READELF := $(TARGET_TOOLS_PREFIX)readelf$(HOST_EXECUTABLE_SUFFIX)
-TARGET_STRIP := $(TARGET_TOOLS_PREFIX)strip$(HOST_EXECUTABLE_SUFFIX)
+TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc
+TARGET_CXX := $(TARGET_TOOLS_PREFIX)g++
+TARGET_AR := $(TARGET_TOOLS_PREFIX)ar
+TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy
+TARGET_LD := $(TARGET_TOOLS_PREFIX)ld
+TARGET_READELF := $(TARGET_TOOLS_PREFIX)readelf
+TARGET_STRIP := $(TARGET_TOOLS_PREFIX)strip
+TARGET_NM := $(TARGET_TOOLS_PREFIX)nm
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_elf,$(1),$(2))
+endef
 
 TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
 
@@ -79,8 +83,6 @@
   TARGET_mips_CFLAGS += -fno-omit-frame-pointer
 endif
 
-android_config_h := $(call select-android-config-h,linux-mips64)
-
 TARGET_GLOBAL_CFLAGS += \
 			$(TARGET_mips_CFLAGS) \
 			-U__unix -U__unix__ -Umips \
@@ -93,8 +95,6 @@
 			-no-canonical-prefixes \
 			-fno-canonical-system-headers \
 			$(arch_variant_cflags) \
-			-include $(android_config_h) \
-			-I $(dir $(android_config_h))
 
 # Help catch common 32/64-bit errors.
 TARGET_GLOBAL_CFLAGS += \
@@ -115,6 +115,9 @@
 			-Wl,--fatal-warnings \
 			$(arch_variant_ldflags)
 
+# Disable transitive dependency library symbol resolving.
+TARGET_GLOBAL_LDFLAGS += -Wl,--allow-shlib-undefined
+
 TARGET_GLOBAL_CPPFLAGS += -fvisibility-inlines-hidden
 
 # More flags/options can be added here
@@ -128,7 +131,6 @@
 
 libc_root := bionic/libc
 libm_root := bionic/libm
-libthread_db_root := bionic/libthread_db
 
 
 ## on some hosts, the target cross-compiler is not available so do not run this command
@@ -149,6 +151,7 @@
 endif
 
 KERNEL_HEADERS_COMMON := $(libc_root)/kernel/uapi
+KERNEL_HEADERS_COMMON += $(libc_root)/kernel/common
 KERNEL_HEADERS_ARCH   := $(libc_root)/kernel/uapi/asm-mips
 # TODO: perhaps use $(libc_root)/kernel/uapi/asm-$(TARGET_ARCH) instead of asm-mips ?
 KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
@@ -159,7 +162,7 @@
 	$(KERNEL_HEADERS) \
 	$(libm_root)/include \
 	$(libm_root)/include/mips \
-	$(libthread_db_root)/include
+
 # TODO: perhaps use $(libm_root)/include/mips64 instead of mips ?
 
 TARGET_CRTBEGIN_STATIC_O := $(TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_static.o
@@ -171,6 +174,4 @@
 
 TARGET_PACK_MODULE_RELOCATIONS := true
 
-TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libstdc++ libm
-
 TARGET_LINKER := /system/bin/linker64
diff --git a/core/combo/TARGET_linux-x86.mk b/core/combo/TARGET_linux-x86.mk
index 340f306..c4cb0f8 100644
--- a/core/combo/TARGET_linux-x86.mk
+++ b/core/combo/TARGET_linux-x86.mk
@@ -49,13 +49,18 @@
 $(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX := $($(combo_2nd_arch_prefix)TARGET_TOOLCHAIN_ROOT)/bin/x86_64-linux-android-
 endif
 
-$(combo_2nd_arch_prefix)TARGET_CC := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_CXX := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)g++$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_AR := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_OBJCOPY := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_LD := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_READELF := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)readelf$(HOST_EXECUTABLE_SUFFIX)
-$(combo_2nd_arch_prefix)TARGET_STRIP := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)strip$(HOST_EXECUTABLE_SUFFIX)
+$(combo_2nd_arch_prefix)TARGET_CC := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)gcc
+$(combo_2nd_arch_prefix)TARGET_CXX := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)g++
+$(combo_2nd_arch_prefix)TARGET_AR := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ar
+$(combo_2nd_arch_prefix)TARGET_OBJCOPY := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)objcopy
+$(combo_2nd_arch_prefix)TARGET_LD := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)ld
+$(combo_2nd_arch_prefix)TARGET_READELF := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)readelf
+$(combo_2nd_arch_prefix)TARGET_STRIP := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)strip
+$(combo_2nd_arch_prefix)TARGET_NM := $($(combo_2nd_arch_prefix)TARGET_TOOLS_PREFIX)nm
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_elf,$(1),$(2))
+endef
 
 ifneq ($(wildcard $($(combo_2nd_arch_prefix)TARGET_CC)),)
 $(combo_2nd_arch_prefix)TARGET_LIBGCC := \
@@ -72,11 +77,10 @@
 libm_root := bionic/libm
 
 KERNEL_HEADERS_COMMON := $(libc_root)/kernel/uapi
+KERNEL_HEADERS_COMMON += $(libc_root)/kernel/common
 KERNEL_HEADERS_ARCH   := $(libc_root)/kernel/uapi/asm-x86 # x86 covers both x86 and x86_64.
 KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
 
-android_config_h := $(call select-android-config-h,target_linux-x86)
-
 $(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS += \
 			-O2 \
 			-Wa,--noexecstack \
@@ -94,8 +98,6 @@
 			-m32 \
 			-no-canonical-prefixes \
 			-fno-canonical-system-headers \
-			-include $(android_config_h) \
-			-I $(dir $(android_config_h))
 
 $(combo_2nd_arch_prefix)TARGET_GLOBAL_CFLAGS += $(arch_variant_cflags)
 
@@ -144,8 +146,6 @@
 
 $(combo_2nd_arch_prefix)TARGET_PACK_MODULE_RELOCATIONS := true
 
-$(combo_2nd_arch_prefix)TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libm
-
 $(combo_2nd_arch_prefix)TARGET_LINKER := /system/bin/linker
 
 $(combo_2nd_arch_prefix)TARGET_GLOBAL_YASM_FLAGS := -f elf32 -m x86
diff --git a/core/combo/TARGET_linux-x86_64.mk b/core/combo/TARGET_linux-x86_64.mk
index 53b0572..b7ec50b 100644
--- a/core/combo/TARGET_linux-x86_64.mk
+++ b/core/combo/TARGET_linux-x86_64.mk
@@ -49,13 +49,18 @@
 TARGET_TOOLS_PREFIX := $(TARGET_TOOLCHAIN_ROOT)/bin/x86_64-linux-android-
 endif
 
-TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
-TARGET_CXX := $(TARGET_TOOLS_PREFIX)g++$(HOST_EXECUTABLE_SUFFIX)
-TARGET_AR := $(TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
-TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
-TARGET_LD := $(TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
-TARGET_READELF := $(TARGET_TOOLS_PREFIX)readelf$(HOST_EXECUTABLE_SUFFIX)
-TARGET_STRIP := $(TARGET_TOOLS_PREFIX)strip$(HOST_EXECUTABLE_SUFFIX)
+TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc
+TARGET_CXX := $(TARGET_TOOLS_PREFIX)g++
+TARGET_AR := $(TARGET_TOOLS_PREFIX)ar
+TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy
+TARGET_LD := $(TARGET_TOOLS_PREFIX)ld
+TARGET_READELF := $(TARGET_TOOLS_PREFIX)readelf
+TARGET_STRIP := $(TARGET_TOOLS_PREFIX)strip
+TARGET_NM := $(TARGET_TOOLS_PREFIX)nm
+
+define $(combo_var_prefix)transform-shared-lib-to-toc
+$(call _gen_toc_command_for_elf,$(1),$(2))
+endef
 
 ifneq ($(wildcard $(TARGET_CC)),)
 TARGET_LIBGCC := \
@@ -72,6 +77,7 @@
 libm_root := bionic/libm
 
 KERNEL_HEADERS_COMMON := $(libc_root)/kernel/uapi
+KERNEL_HEADERS_COMMON += $(libc_root)/kernel/common
 KERNEL_HEADERS_ARCH   := $(libc_root)/kernel/uapi/asm-x86 # x86 covers both x86 and x86_64.
 KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
 
@@ -99,10 +105,6 @@
     -Werror=int-to-pointer-cast \
     -Werror=implicit-function-declaration \
 
-android_config_h := $(call select-android-config-h,target_linux-x86)
-TARGET_ANDROID_CONFIG_CFLAGS := -include $(android_config_h) -I $(dir $(android_config_h))
-TARGET_GLOBAL_CFLAGS += $(TARGET_ANDROID_CONFIG_CFLAGS)
-
 TARGET_GLOBAL_CFLAGS += $(arch_variant_cflags)
 
 ifeq ($(ARCH_X86_HAVE_SSSE3),true)   # yes, really SSSE3, not SSE3!
@@ -151,8 +153,6 @@
 TARGET_CRTBEGIN_SO_O := $(TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtbegin_so.o
 TARGET_CRTEND_SO_O := $(TARGET_OUT_INTERMEDIATE_LIBRARIES)/crtend_so.o
 
-TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libm
-
 TARGET_LINKER := /system/bin/linker64
 
 TARGET_GLOBAL_YASM_FLAGS := -f elf64 -m amd64
diff --git a/core/combo/arch/arm/armv7-a-neon.mk b/core/combo/arch/arm/armv7-a-neon.mk
index 99f17aa..5dc1fec 100644
--- a/core/combo/arch/arm/armv7-a-neon.mk
+++ b/core/combo/arch/arm/armv7-a-neon.mk
@@ -24,7 +24,7 @@
 	arch_variant_ldflags := \
 		-Wl,--fix-cortex-a8
 else
-ifeq ($(strip $(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT)),cortex-a7)
+ifneq (,$(filter cortex-a7 cortex-a53 cortex-a53.a57,$(TARGET_$(combo_2nd_arch_prefix)CPU_VARIANT)))
 	arch_variant_cflags := -mcpu=cortex-a7
 	arch_variant_ldflags := \
 		-Wl,--no-fix-cortex-a8
diff --git a/core/combo/arch/mips/mips32-fp.mk b/core/combo/arch/mips/mips32-fp.mk
index 8320e93..912ff63 100644
--- a/core/combo/arch/mips/mips32-fp.mk
+++ b/core/combo/arch/mips/mips32-fp.mk
@@ -7,6 +7,7 @@
     -mips32 \
     -mfp32 \
     -modd-spreg \
+    -mno-synci
 
 arch_variant_ldflags := \
     -Wl,-melf32ltsmip
diff --git a/core/combo/arch/mips/mips32r2-fp-xburst.mk b/core/combo/arch/mips/mips32r2-fp-xburst.mk
index 2b4f714..09b3bc2 100644
--- a/core/combo/arch/mips/mips32r2-fp-xburst.mk
+++ b/core/combo/arch/mips/mips32r2-fp-xburst.mk
@@ -9,7 +9,8 @@
     -mfp32 \
     -modd-spreg \
     -mno-fused-madd \
-    -Wa,-mmxu
+    -Wa,-mmxu \
+    -mno-synci
 
 arch_variant_ldflags := \
     -Wl,-melf32ltsmip
diff --git a/core/combo/include/arch/darwin-x86/AndroidConfig.h b/core/combo/include/arch/darwin-x86/AndroidConfig.h
deleted file mode 100644
index c28a7f8..0000000
--- a/core/combo/include/arch/darwin-x86/AndroidConfig.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * Copyright (C) 2005 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * Android config -- "Darwin".  Used for X86 Mac OS X.
- */
-#ifndef _ANDROID_CONFIG_H
-#define _ANDROID_CONFIG_H
-
-/*
- * ===========================================================================
- *                              !!! IMPORTANT !!!
- * ===========================================================================
- *
- * This file is included by ALL C/C++ source files.  Don't put anything in
- * here unless you are absolutely certain it can't go anywhere else.
- *
- * Any C++ stuff must be wrapped with "#ifdef __cplusplus".  Do not use "//"
- * comments.
- */
-
-/*
- * Define if we have <malloc.h> header
- */
-/* #define HAVE_MALLOC_H 1 */
-
-/*
- * The default path separator for the platform
- */
-#define OS_PATH_SEPARATOR '/'
-
-/*
- * Define if <stdint.h> exists.
- */
-#define HAVE_STDINT_H 1
-
-#endif /*_ANDROID_CONFIG_H*/
diff --git a/core/combo/include/arch/linux-arm/AndroidConfig.h b/core/combo/include/arch/linux-arm/AndroidConfig.h
deleted file mode 100644
index e819535..0000000
--- a/core/combo/include/arch/linux-arm/AndroidConfig.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2005 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * Android config -- "android-arm".  Used for ARM device builds.
- */
-#ifndef _ANDROID_CONFIG_H
-#define _ANDROID_CONFIG_H
-
-/*
- * ===========================================================================
- *                              !!! IMPORTANT !!!
- * ===========================================================================
- *
- * This file is included by ALL C/C++ source files.  Don't put anything in
- * here unless you are absolutely certain it can't go anywhere else.
- *
- * Any C++ stuff must be wrapped with "#ifdef __cplusplus".  Do not use "//"
- * comments.
- */
-
-/*
- * Define if we have <malloc.h> header
- */
-#define HAVE_MALLOC_H 1
-
-/*
- * Define if we're running on *our* linux on device or emulator.
- */
-#define HAVE_ANDROID_OS 1
-
-/*
- * The default path separator for the platform
- */
-#define OS_PATH_SEPARATOR '/'
-
-/*
- * Define if <stdint.h> exists.
- */
-#define HAVE_STDINT_H 1
-
-#endif /* _ANDROID_CONFIG_H */
diff --git a/core/combo/include/arch/linux-arm64/AndroidConfig.h b/core/combo/include/arch/linux-arm64/AndroidConfig.h
deleted file mode 100644
index cee484d..0000000
--- a/core/combo/include/arch/linux-arm64/AndroidConfig.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2013 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * Android config -- "android-aarch64".  Used for ARM aarch64 device builds.
- */
-#ifndef _ANDROID_CONFIG_H
-#define _ANDROID_CONFIG_H
-
-/*
- * ===========================================================================
- *                              !!! IMPORTANT !!!
- * ===========================================================================
- *
- * This file is included by ALL C/C++ source files.  Don't put anything in
- * here unless you are absolutely certain it can't go anywhere else.
- *
- * Any C++ stuff must be wrapped with "#ifdef __cplusplus".  Do not use "//"
- * comments.
- */
-
-/*
- * Define if we have <malloc.h> header
- */
-#define HAVE_MALLOC_H 1
-
-/*
- * Define if we're running on *our* linux on device or emulator.
- */
-#define HAVE_ANDROID_OS 1
-
-/*
- * The default path separator for the platform
- */
-#define OS_PATH_SEPARATOR '/'
-
-/*
- * Define if <stdint.h> exists.
- */
-#define HAVE_STDINT_H 1
-
-#endif /* _ANDROID_CONFIG_H */
diff --git a/core/combo/include/arch/linux-mips/AndroidConfig.h b/core/combo/include/arch/linux-mips/AndroidConfig.h
deleted file mode 100644
index a5dcef1..0000000
--- a/core/combo/include/arch/linux-mips/AndroidConfig.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2010 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * Android config -- "android-mips".  Used for MIPS device builds.
- */
-#ifndef _ANDROID_CONFIG_H
-#define _ANDROID_CONFIG_H
-
-/*
- * ===========================================================================
- *                              !!! IMPORTANT !!!
- * ===========================================================================
- *
- * This file is included by ALL C/C++ source files.  Don't put anything in
- * here unless you are absolutely certain it can't go anywhere else.
- *
- * Any C++ stuff must be wrapped with "#ifdef __cplusplus".  Do not use "//"
- * comments.
- */
-
-/*
- * Define if we have <malloc.h> header
- */
-#define HAVE_MALLOC_H 1
-
-/*
- * Define if we're running on *our* linux on device or emulator.
- */
-#define HAVE_ANDROID_OS 1
-
-/*
- * The default path separator for the platform
- */
-#define OS_PATH_SEPARATOR '/'
-
-/*
- * Define if <stdint.h> exists.
- */
-#define HAVE_STDINT_H 1
-
-#endif /* _ANDROID_CONFIG_H */
diff --git a/core/combo/include/arch/linux-mips64/AndroidConfig.h b/core/combo/include/arch/linux-mips64/AndroidConfig.h
deleted file mode 100644
index 62d569e..0000000
--- a/core/combo/include/arch/linux-mips64/AndroidConfig.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2013 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * Android config -- "android-mips64".  Used for MIPS device builds.
- */
-#ifndef _ANDROID_CONFIG_H
-#define _ANDROID_CONFIG_H
-
-/*
- * ===========================================================================
- *                              !!! IMPORTANT !!!
- * ===========================================================================
- *
- * This file is included by ALL C/C++ source files.  Don't put anything in
- * here unless you are absolutely certain it can't go anywhere else.
- *
- * Any C++ stuff must be wrapped with "#ifdef __cplusplus".  Do not use "//"
- * comments.
- */
-
-/*
- * Define if we have <malloc.h> header
- */
-#define HAVE_MALLOC_H 1
-
-/*
- * Define if we're running on *our* linux on device or emulator.
- */
-#define HAVE_ANDROID_OS 1
-
-/*
- * The default path separator for the platform
- */
-#define OS_PATH_SEPARATOR '/'
-
-/*
- * Define if <stdint.h> exists.
- */
-#define HAVE_STDINT_H 1
-
-#endif /* _ANDROID_CONFIG_H */
diff --git a/core/combo/include/arch/linux-x86/AndroidConfig.h b/core/combo/include/arch/linux-x86/AndroidConfig.h
deleted file mode 100644
index 89b29fe..0000000
--- a/core/combo/include/arch/linux-x86/AndroidConfig.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (C) 2005 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * Android config -- "Linux".  Used for desktop x86 Linux.
- */
-#ifndef _ANDROID_CONFIG_H
-#define _ANDROID_CONFIG_H
-
-/*
- * ===========================================================================
- *                              !!! IMPORTANT !!!
- * ===========================================================================
- *
- * This file is included by ALL C/C++ source files.  Don't put anything in
- * here unless you are absolutely certain it can't go anywhere else.
- *
- * Any C++ stuff must be wrapped with "#ifdef __cplusplus".  Do not use "//"
- * comments.
- */
-
-/*
- * We need to choose between 32-bit and 64-bit off_t.  All of our code should
- * agree on the same size.  For desktop systems, use 64-bit values,
- * because some of our libraries (e.g. wxWidgets) expect to be built that way.
- */
-#define _FILE_OFFSET_BITS 64
-#define _LARGEFILE_SOURCE 1
-
-/*
- * Define if we have <malloc.h> header
- */
-#define HAVE_MALLOC_H 1
-
-/*
- * The default path separator for the platform
- */
-#define OS_PATH_SEPARATOR '/'
-
-/*
- * Define if <stdint.h> exists.
- */
-#define HAVE_STDINT_H 1
-
-#endif /*_ANDROID_CONFIG_H*/
diff --git a/core/combo/include/arch/target_linux-x86/AndroidConfig.h b/core/combo/include/arch/target_linux-x86/AndroidConfig.h
deleted file mode 100644
index 41e4df9..0000000
--- a/core/combo/include/arch/target_linux-x86/AndroidConfig.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2005 The Android Open Source Project
- *
- * Android config -- "target_linux-x86".  Used for x86 linux target devices.
- */
-#ifndef _ANDROID_CONFIG_H
-#define _ANDROID_CONFIG_H
-
-/*
- * ===========================================================================
- *                              !!! IMPORTANT !!!
- * ===========================================================================
- *
- * This file is included by ALL C/C++ source files.  Don't put anything in
- * here unless you are absolutely certain it can't go anywhere else.
- *
- * Any C++ stuff must be wrapped with "#ifdef __cplusplus".  Do not use "//"
- * comments.
- */
-
-/*
- * Define if we have <malloc.h> header
- */
-#define HAVE_MALLOC_H 1
-
-/*
- * Define if we're running on *our* linux on device or emulator.
- */
-#define HAVE_ANDROID_OS 1
-
-/*
- * The default path separator for the platform
- */
-#define OS_PATH_SEPARATOR '/'
-
-/*
- * Define if <stdint.h> exists.
- */
-#define HAVE_STDINT_H 1
-
-#endif /* _ANDROID_CONFIG_H */
diff --git a/core/combo/include/arch/windows/AndroidConfig.h b/core/combo/include/arch/windows/AndroidConfig.h
deleted file mode 100644
index e7eb837..0000000
--- a/core/combo/include/arch/windows/AndroidConfig.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * Copyright (C) 2005 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-/*
- * Android config -- "CYGWIN_NT-5.1".
- *
- * Cygwin has pthreads, but GDB seems to get confused if you use it to
- * create threads.  By "confused", I mean it freezes up the first time the
- * debugged process creates a thread, even if you use CreateThread.  The
- * mere presence of pthreads linkage seems to cause problems.
- */
-#ifndef _ANDROID_CONFIG_H
-#define _ANDROID_CONFIG_H
-
-/*
- * ===========================================================================
- *                              !!! IMPORTANT !!!
- * ===========================================================================
- *
- * This file is included by ALL C/C++ source files.  Don't put anything in
- * here unless you are absolutely certain it can't go anywhere else.
- *
- * Any C++ stuff must be wrapped with "#ifdef __cplusplus".  Do not use "//"
- * comments.
- */
-
-/* MingW doesn't define __BEGIN_DECLS / __END_DECLS. */
-
-#ifndef __BEGIN_DECLS
-#  ifdef __cplusplus
-#    define __BEGIN_DECLS extern "C" {
-#  else
-#    define __BEGIN_DECLS
-#  endif
-#endif
-
-#ifndef __END_DECLS
-#  ifdef __cplusplus
-#    define __END_DECLS }
-#  else
-#    define __END_DECLS
-#  endif
-#endif
-
-/* TODO: replace references to this. */
-#define HAVE_WIN32_IPC
-
-#ifdef __CYGWIN__
-#error "CYGWIN is unsupported for platform builds"
-#endif
-
-/*
- * Define this if you build against MSVCRT.DLL
- */
-#define HAVE_MS_C_RUNTIME
-
-/*
- * Define this if we want to use WinSock.
- */
-#define HAVE_WINSOCK
-
-/*
- * We need to choose between 32-bit and 64-bit off_t.  All of our code should
- * agree on the same size.  For desktop systems, use 64-bit values,
- * because some of our libraries (e.g. wxWidgets) expect to be built that way.
- */
-#define _FILE_OFFSET_BITS 64
-#define _LARGEFILE_SOURCE 1
-
-/*
- * Add any extra platform-specific defines here.
- */
-#define WIN32 1                 /* stock Cygwin doesn't define these */
-#define _WIN32 1
-#define _WIN32_WINNT 0x0500     /* admit to using >= Win2K */
-
-#define HAVE_WINDOWS_PATHS      /* needed by simulator */
-
-/*
- * The default path separator for the platform
- */
-#define OS_PATH_SEPARATOR '\\'
-
-/*
- * Various definitions missing in MinGW
- */
-#ifdef USE_MINGW
-#define S_IRGRP 0
-#endif
-
-#endif /*_ANDROID_CONFIG_H*/
diff --git a/core/combo/javac.mk b/core/combo/javac.mk
index 82cbb43..70dae13 100644
--- a/core/combo/javac.mk
+++ b/core/combo/javac.mk
@@ -31,12 +31,7 @@
 endif
 
 # Whatever compiler is on this system.
-ifeq ($(BUILD_OS), windows)
-    COMMON_JAVAC := development/host/windows/prebuilt/javawrap.exe -J-Xmx256m \
-        $(common_jdk_flags)
-else
-    COMMON_JAVAC := $(JAVACC) -J-Xmx1024M $(common_jdk_flags)
-endif
+COMMON_JAVAC := $(JAVACC) -J-Xmx1024M $(common_jdk_flags)
 
 # Eclipse.
 ifeq ($(CUSTOM_JAVA_COMPILER), eclipse)
@@ -45,6 +40,8 @@
     $(info CUSTOM_JAVA_COMPILER=eclipse)
 endif
 
+GLOBAL_JAVAC_DEBUG_FLAGS := -g
+
 HOST_JAVAC ?= $(COMMON_JAVAC)
 TARGET_JAVAC ?= $(COMMON_JAVAC)
 
diff --git a/core/combo/mac_version.mk b/core/combo/mac_version.mk
index 6defba7..f6bd852 100644
--- a/core/combo/mac_version.mk
+++ b/core/combo/mac_version.mk
@@ -9,7 +9,7 @@
 
 build_mac_version := $(shell sw_vers -productVersion)
 
-mac_sdk_versions_supported :=  10.6 10.7 10.8 10.9
+mac_sdk_versions_supported :=  10.8 10.9 10.10 10.11
 ifneq ($(strip $(MAC_SDK_VERSION)),)
 mac_sdk_version := $(MAC_SDK_VERSION)
 ifeq ($(filter $(mac_sdk_version),$(mac_sdk_versions_supported)),)
@@ -19,7 +19,7 @@
 $(error Stop.)
 endif
 else
-mac_sdk_versions_installed := $(shell xcodebuild -showsdks | grep macosx | sort | sed -e "s/.*macosx//g")
+mac_sdk_versions_installed := $(shell xcodebuild -showsdks | grep macosx | sed -e "s/.*macosx//g")
 mac_sdk_version := $(firstword $(filter $(mac_sdk_versions_installed), $(mac_sdk_versions_supported)))
 ifeq ($(mac_sdk_version),)
 mac_sdk_version := $(firstword $(mac_sdk_versions_supported))
diff --git a/core/config.mk b/core/config.mk
index 136b204..49810ee 100644
--- a/core/config.mk
+++ b/core/config.mk
@@ -23,6 +23,10 @@
 
 
 endef
+# The pound character "#"
+define pound
+#
+endef
 # Unfortunately you can't simply define backslash as \ or \\.
 backslash := \a
 backslash := $(patsubst %a,%,$(backslash))
@@ -86,6 +90,8 @@
 BUILD_NATIVE_TEST := $(BUILD_SYSTEM)/native_test.mk
 BUILD_NATIVE_BENCHMARK := $(BUILD_SYSTEM)/native_benchmark.mk
 BUILD_HOST_NATIVE_TEST := $(BUILD_SYSTEM)/host_native_test.mk
+BUILD_FUZZ_TEST := $(BUILD_SYSTEM)/fuzz_test.mk
+BUILD_HOST_FUZZ_TEST := $(BUILD_SYSTEM)/host_fuzz_test.mk
 
 BUILD_SHARED_TEST_LIBRARY := $(BUILD_SYSTEM)/shared_test_lib.mk
 BUILD_HOST_SHARED_TEST_LIBRARY := $(BUILD_SYSTEM)/host_shared_test_lib.mk
@@ -105,7 +111,17 @@
 # lines being executed, instead of a short message about
 # the kind of operation being done.
 SHOW_COMMANDS:= $(filter showcommands,$(MAKECMDGOALS))
+hide := $(if $(SHOW_COMMANDS),,@)
 
+################################################################
+# Tools needed in product configuration makefiles.
+################################################################
+NORMALIZE_PATH := build/tools/normalize_path.py
+
+# $(1): the paths to be normalized
+define normalize-paths
+$(if $(1),$(shell $(NORMALIZE_PATH) $(1)))
+endef
 
 # ###############################################################
 # Set common values
@@ -115,13 +131,22 @@
 COMMON_GLOBAL_CFLAGS:= -DANDROID -fmessage-length=0 -W -Wall -Wno-unused -Winit-self -Wpointer-arith
 COMMON_RELEASE_CFLAGS:= -DNDEBUG -UDEBUG
 
-COMMON_GLOBAL_CPPFLAGS:= $(COMMON_GLOBAL_CFLAGS) -Wsign-promo -std=gnu++11
-COMMON_RELEASE_CPPFLAGS:= $(COMMON_RELEASE_CFLAGS)
+# Force gcc to always output color diagnostics.  Ninja will strip the ANSI
+# color codes if it is not running in a terminal.
+COMMON_GLOBAL_CFLAGS += -fdiagnostics-color
 
-GLOBAL_CFLAGS_NO_OVERRIDE :=  \
+COMMON_GLOBAL_CPPFLAGS:= -Wsign-promo
+COMMON_RELEASE_CPPFLAGS:=
+
+GLOBAL_CFLAGS_NO_OVERRIDE := \
     -Werror=int-to-pointer-cast \
     -Werror=pointer-to-int-cast \
 
+GLOBAL_CLANG_CFLAGS_NO_OVERRIDE := \
+    -Werror=address-of-temporary \
+    -Werror=null-dereference \
+    -Werror=return-type \
+
 GLOBAL_CPPFLAGS_NO_OVERRIDE :=
 
 # Set the extensions used for various packages
@@ -161,6 +186,35 @@
 # See envsetup.mk for a description of SCAN_EXCLUDE_DIRS
 FIND_LEAVES_EXCLUDES := $(addprefix --prune=, $(OUT_DIR) $(SCAN_EXCLUDE_DIRS) .repo .git)
 
+# ---------------------------------------------------------------
+# We run gcc/clang with PWD=/proc/self/cwd to remove the $TOP
+# from the debug output. That way two builds in two different
+# directories will create the same output.
+# /proc doesn't exist on Darwin.
+ifeq ($(HOST_OS),linux)
+RELATIVE_PWD := PWD=/proc/self/cwd
+# Remove this useless prefix from the debug output.
+COMMON_GLOBAL_CFLAGS += -fdebug-prefix-map=/proc/self/cwd=
+else
+RELATIVE_PWD :=
+endif
+
+# ---------------------------------------------------------------
+# Allow the C/C++ macros __DATE__ and __TIME__ to be set to the
+# build date and time, so that a build may be repeated.
+# Write the date and time to a file so that the command line
+# doesn't change every time, which would cause ninja to rebuild
+# the files.
+$(shell mkdir -p $(OUT_DIR) && \
+    $(DATE) "+%b %_d %Y" > $(OUT_DIR)/build_c_date.txt && \
+    $(DATE) +%T > $(OUT_DIR)/build_c_time.txt)
+BUILD_DATETIME_C_DATE := $$(cat $(OUT_DIR)/build_c_date.txt)
+BUILD_DATETIME_C_TIME := $$(cat $(OUT_DIR)/build_c_time.txt)
+
+ifeq ($(OVERRIDE_C_DATE_TIME),true)
+COMMON_GLOBAL_CFLAGS += -Wno-builtin-macro-redefined -D__DATE__="\"$(BUILD_DATETIME_C_DATE)\"" -D__TIME__=\"$(BUILD_DATETIME_C_TIME)\"
+endif
+
 # The build system exposes several variables for where to find the kernel
 # headers:
 #   TARGET_DEVICE_KERNEL_HEADERS is automatically created for the current
@@ -227,9 +281,16 @@
 endif
 TARGET_CPU_ABI2 := $(strip $(TARGET_CPU_ABI2))
 
-# $(1): os/arch
-define select-android-config-h
-build/core/combo/include/arch/$(1)/AndroidConfig.h
+# Commands to generate .toc file common to ELF .so files.
+define _gen_toc_command_for_elf
+$(hide) ($($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)READELF) -d $(1) | grep SONAME || echo "No SONAME for $1") > $(2)
+$(hide) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)NM) -gD -f p $(1) | cut -f1-2 -d" " >> $(2)
+endef
+
+# Commands to generate .toc file from Darwin dynamic library.
+define _gen_toc_command_for_macho
+$(hide) otool -l $(1) | grep LC_ID_DYLIB -A 5 > $(2)
+$(hide) nm -gP $(1) | cut -f1-2 -d" " | grep -v U$$ >> $(2)
 endef
 
 combo_target := HOST_
@@ -243,6 +304,13 @@
 include $(BUILD_SYSTEM)/combo/select.mk
 endif
 
+# Load the windows cross compiler under Linux
+ifdef HOST_CROSS_OS
+combo_target := HOST_CROSS_
+combo_2nd_arch_prefix :=
+include $(BUILD_SYSTEM)/combo/select.mk
+endif
+
 # on windows, the tools have .exe at the end, and we depend on the
 # host config stuff being done first
 
@@ -258,6 +326,7 @@
 endif
 
 include $(BUILD_SYSTEM)/ccache.mk
+include $(BUILD_SYSTEM)/goma.mk
 
 ifdef TARGET_PREFER_32_BIT
 TARGET_PREFER_32_BIT_APPS := true
@@ -380,9 +449,7 @@
 # Generic tools.
 JACK := $(HOST_OUT_EXECUTABLES)/jack
 JACK_JAR := $(HOST_OUT_JAVA_LIBRARIES)/jack.jar
-JACK_LAUNCHER_JAR := $(HOST_OUT_JAVA_LIBRARIES)/jack-launcher.jar
 JILL_JAR := $(HOST_OUT_JAVA_LIBRARIES)/jill.jar
-JACK_MULTIDEX_DEFAULT_PREPROCESSOR := frameworks/multidex/library/resources/JACK-INF/legacyMultidexInstallation.jpp
 
 LEX := prebuilts/misc/$(BUILD_OS)-$(HOST_PREBUILT_ARCH)/flex/flex-2.5.39
 # The default PKGDATADIR built in the prebuilt bison is a relative path
@@ -399,7 +466,14 @@
 AAPT := $(HOST_OUT_EXECUTABLES)/aapt$(HOST_EXECUTABLE_SUFFIX)
 AIDL := $(HOST_OUT_EXECUTABLES)/aidl$(HOST_EXECUTABLE_SUFFIX)
 AIDL_CPP := $(HOST_OUT_EXECUTABLES)/aidl-cpp$(HOST_EXECUTABLE_SUFFIX)
+ifeq ($(HOST_OS),linux)
+BREAKPAD_DUMP_SYMS := $(HOST_OUT_EXECUTABLES)/dump_syms
+else
+# For non-supported hosts, do not generate breakpad symbols.
+BREAKPAD_GENERATE_SYMBOLS := false
+endif
 PROTOC := $(HOST_OUT_EXECUTABLES)/aprotoc$(HOST_EXECUTABLE_SUFFIX)
+DBUS_GENERATOR := $(HOST_OUT_EXECUTABLES)/dbus-binding-generator
 SIGNAPK_JAR := $(HOST_OUT_JAVA_LIBRARIES)/signapk$(COMMON_JAVA_PACKAGE_SUFFIX)
 MKBOOTFS := $(HOST_OUT_EXECUTABLES)/mkbootfs$(HOST_EXECUTABLE_SUFFIX)
 MINIGZIP := $(HOST_OUT_EXECUTABLES)/minigzip$(HOST_EXECUTABLE_SUFFIX)
@@ -434,27 +508,6 @@
 else
 DEFAULT_JACK_ENABLED:=
 endif
-ifneq ($(strip $(ANDROID_JACK_VM)),)
-JACK_VM := $(ANDROID_JACK_VM)
-else
-JACK_VM := java
-endif
-# call jack
-#
-# $(1): vm arguments
-# $(2): jack perf arguments
-ifneq (,$(strip $(filter dist,$(MAKECMDGOALS))))
-JACK_SERVER_LOG_COMMAND := mkdir -p $(DIST_DIR)/logs/; SERVER_LOG=$(DIST_DIR)/logs/jack-server.log
-endif
-define call-jack
-$(JACK_SERVER_LOG_COMMAND) JACK_VM_COMMAND="$(JACK_VM) $(1) $(JAVA_TMPDIR_ARG) -jar $(JACK_LAUNCHER_JAR) " JACK_JAR="$(JACK_JAR)" $(JACK) $(2)
-endef
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JACK_VM_ARGS := $(DEFAULT_JACK_VM_ARGS)
-ifneq ($(ANDROID_JACK_VM_ARGS),)
-DEFAULT_JACK_VM_ARGS := $(ANDROID_JACK_VM_ARGS)
-else
-DEFAULT_JACK_VM_ARGS := -Dfile.encoding=UTF-8 -Xms2560m -XX:+TieredCompilation
-endif
 ifneq ($(ANDROID_JACK_EXTRA_ARGS),)
 DEFAULT_JACK_EXTRA_ARGS := $(ANDROID_JACK_EXTRA_ARGS)
 else
@@ -468,7 +521,6 @@
 JAVATAGS := build/tools/java-event-log-tags.py
 LLVM_RS_CC := $(HOST_OUT_EXECUTABLES)/llvm-rs-cc$(HOST_EXECUTABLE_SUFFIX)
 BCC_COMPAT := $(HOST_OUT_EXECUTABLES)/bcc_compat$(HOST_EXECUTABLE_SUFFIX)
-LINT := prebuilts/sdk/tools/lint
 RMTYPEDEFS := $(HOST_OUT_EXECUTABLES)/rmtypedefs
 APPEND2SIMG := $(HOST_OUT_EXECUTABLES)/append2simg
 VERITY_SIGNER := $(HOST_OUT_EXECUTABLES)/verity_signer
@@ -476,6 +528,7 @@
 BOOT_SIGNER := $(HOST_OUT_EXECUTABLES)/boot_signer
 FUTILITY := prebuilts/misc/$(BUILD_OS)-$(HOST_PREBUILT_ARCH)/futility/futility
 VBOOT_SIGNER := prebuilts/misc/scripts/vboot_signer/vboot_signer.sh
+FEC := $(HOST_OUT_EXECUTABLES)/fec
 
 # ACP is always for the build OS, not for the host OS
 ACP := $(BUILD_OUT_EXECUTABLES)/acp$(BUILD_EXECUTABLE_SUFFIX)
@@ -483,6 +536,9 @@
 # dx is java behind a shell script; no .exe necessary.
 DX := $(HOST_OUT_EXECUTABLES)/dx
 ZIPALIGN := $(HOST_OUT_EXECUTABLES)/zipalign$(HOST_EXECUTABLE_SUFFIX)
+ifndef TARGET_BUILD_APPS
+ZIPTIME := $(HOST_OUT_EXECUTABLES)/ziptime$(HOST_EXECUTABLE_SUFFIX)
+endif
 
 # relocation packer
 RELOCATION_PACKER := prebuilts/misc/$(BUILD_OS)-$(HOST_PREBUILT_ARCH)/relocation_packer/relocation_packer
@@ -496,18 +552,15 @@
 
 YACC_HEADER_SUFFIX:= .hpp
 
-# Don't use column under Windows, cygwin or not
-ifeq ($(HOST_OS),windows)
-COLUMN:= cat
-else
 COLUMN:= column
-endif
 
+# We may not have the right JAVA_HOME/PATH set up yet when this is run from envsetup.sh.
+ifneq ($(CALLED_FROM_SETUP),true)
 HOST_JDK_TOOLS_JAR:= $(shell $(BUILD_SYSTEM)/find-jdk-tools-jar.sh)
 
 ifneq ($(HOST_JDK_TOOLS_JAR),)
 ifeq ($(wildcard $(HOST_JDK_TOOLS_JAR)),)
-$(error Error: could not find jdk tools.jar, please check if your JDK was installed correctly)
+$(error Error: could not find jdk tools.jar at $(HOST_JDK_TOOLS_JAR), please check if your JDK was installed correctly)
 endif
 endif
 
@@ -516,6 +569,7 @@
 ifneq ($(filter 64-Bit, $(shell java -version 2>&1)),)
 HOST_JDK_IS_64BIT_VERSION := true
 endif
+endif  # CALLED_FROM_SETUP not true
 
 # It's called md5 on Mac OS and md5sum on Linux
 ifeq ($(HOST_OS),darwin)
@@ -564,7 +618,6 @@
 # sure to only specify them for the target compilers checked in to
 # the source tree.
 TARGET_GLOBAL_CFLAGS += $(TARGET_ERROR_FLAGS)
-TARGET_GLOBAL_CPPFLAGS += $(TARGET_ERROR_FLAGS)
 
 HOST_GLOBAL_CFLAGS += $(HOST_RELEASE_CFLAGS)
 HOST_GLOBAL_CPPFLAGS += $(HOST_RELEASE_CPPFLAGS)
@@ -580,7 +633,6 @@
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_LD_DIRS += -L$($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_PROJECT_INCLUDES := $(TARGET_PROJECT_INCLUDES)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_CFLAGS += $(TARGET_ERROR_FLAGS)
-$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_CPPFLAGS += $(TARGET_ERROR_FLAGS)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_CFLAGS += $($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_RELEASE_CFLAGS)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_CPPFLAGS += $($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_RELEASE_CPPFLAGS)
 endif
@@ -596,27 +648,31 @@
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_CPPFLAGS += $($(HOST_2ND_ARCH_VAR_PREFIX)HOST_RELEASE_CPPFLAGS)
 endif
 
+ifdef HOST_CROSS_OS
+HOST_CROSS_GLOBAL_CFLAGS += $(filter-out $(HOST_CROSS_UNKNOWN_CFLAGS),$(COMMON_GLOBAL_CFLAGS))
+HOST_CROSS_RELEASE_CFLAGS += $(COMMON_RELEASE_CFLAGS)
+HOST_CROSS_GLOBAL_CPPFLAGS += $(COMMON_GLOBAL_CPPFLAGS)
+HOST_CROSS_RELEASE_CPPFLAGS += $(COMMON_RELEASE_CPPFLAGS)
+HOST_CROSS_GLOBAL_LD_DIRS += -L$(HOST_CROSS_OUT_INTERMEDIATE_LIBRARIES)
+HOST_CROSS_PROJECT_INCLUDES:= $(SRC_HEADERS) $(SRC_HOST_HEADERS) $(HOST_CROSS_OUT_HEADERS)
+HOST_CROSS_GLOBAL_CFLAGS += $(HOST_CROSS_RELEASE_CFLAGS)
+HOST_CROSS_GLOBAL_CPPFLAGS += $(HOST_CROSS_RELEASE_CPPFLAGS)
+endif
+
 # allow overriding default Java libraries on a per-target basis
 ifeq ($(TARGET_DEFAULT_JAVA_LIBRARIES),)
-  TARGET_DEFAULT_JAVA_LIBRARIES := core-libart core-junit ext framework
+  TARGET_DEFAULT_JAVA_LIBRARIES := core-libart core-junit ext framework okhttp
 endif
 
 # Flags for DEX2OAT
+first_non_empty_of_three = $(if $(1),$(1),$(if $(2),$(2),$(3)))
 DEX2OAT_TARGET_ARCH := $(TARGET_ARCH)
-ifeq ($(TARGET_CPU_VARIANT),)
-ifeq ($(TARGET_ARCH_VARIANT),)
-DEX2OAT_TARGET_CPU_VARIANT := default
-else
-DEX2OAT_TARGET_CPU_VARIANT := $(TARGET_ARCH_VARIANT)
-endif
-else
-DEX2OAT_TARGET_CPU_VARIANT := $(TARGET_CPU_VARIANT)
-endif
+DEX2OAT_TARGET_CPU_VARIANT := $(call first_non_empty_of_three,$(TARGET_CPU_VARIANT),$(TARGET_ARCH_VARIANT),default)
 DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES := default
 
 ifdef TARGET_2ND_ARCH
 $(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_ARCH := $(TARGET_2ND_ARCH)
-$(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT := $(TARGET_2ND_CPU_VARIANT)
+$(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT := $(call first_non_empty_of_three,$(TARGET_2ND_CPU_VARIANT),$(TARGET_2ND_ARCH_VARIANT),default)
 $(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES := default
 endif
 
@@ -678,9 +734,9 @@
 RS_PREBUILT_CLCORE := prebuilts/sdk/renderscript/lib/$(TARGET_ARCH)/librsrt_$(TARGET_ARCH).bc
 RS_PREBUILT_COMPILER_RT := prebuilts/sdk/renderscript/lib/$(TARGET_ARCH)/libcompiler_rt.a
 ifeq (true,$(TARGET_IS_64_BIT))
-RS_PREBUILT_LIBPATH := -L prebuilts/ndk/9/platforms/android-21/arch-$(TARGET_ARCH)/usr/lib
+RS_PREBUILT_LIBPATH := -L prebuilts/ndk/current/platforms/android-21/arch-$(TARGET_ARCH)/usr/lib
 else
-RS_PREBUILT_LIBPATH := -L prebuilts/ndk/8/platforms/android-9/arch-$(TARGET_ARCH)/usr/lib
+RS_PREBUILT_LIBPATH := -L prebuilts/ndk/current/platforms/android-9/arch-$(TARGET_ARCH)/usr/lib
 endif
 
 # API Level lists for Renderscript Compat lib.
diff --git a/core/config_sanitizers.mk b/core/config_sanitizers.mk
index 7eb1c89..df52e72 100644
--- a/core/config_sanitizers.mk
+++ b/core/config_sanitizers.mk
@@ -4,43 +4,64 @@
 
 my_sanitize := $(strip $(LOCAL_SANITIZE))
 
-# Keep compatibility for LOCAL_ADDRESS_SANITIZER until all targets have moved to
-# `LOCAL_SANITIZE := address`.
-ifeq ($(strip $(LOCAL_ADDRESS_SANITIZER)),true)
-  my_sanitize += address
+# SANITIZE_HOST is only in effect if the module is already using clang (host
+# modules that haven't set `LOCAL_CLANG := false` and device modules that
+# have set `LOCAL_CLANG := true`.
+my_global_sanitize :=
+ifeq ($(my_clang),true)
+  ifdef LOCAL_IS_HOST_MODULE
+    my_global_sanitize := $(strip $(SANITIZE_HOST))
+
+    # SANITIZE_HOST=true is a deprecated way to say SANITIZE_HOST=address.
+    my_global_sanitize := $(subst true,address,$(my_global_sanitize))
+  else
+    my_global_sanitize := $(strip $(SANITIZE_TARGET))
+  endif
 endif
 
-# And `LOCAL_SANITIZE := never`.
-ifeq ($(strip $(LOCAL_ADDRESS_SANITIZER)),false)
-  my_sanitize := never
+# The sanitizer specified by the environment wins over the module.
+ifneq ($(my_global_sanitize),)
+  my_sanitize := $(my_global_sanitize)
 endif
 
 # Don't apply sanitizers to NDK code.
 ifdef LOCAL_SDK_VERSION
-  my_sanitize := never
+  my_sanitize :=
 endif
 
-# Configure SANITIZE_HOST.
-ifdef LOCAL_IS_HOST_MODULE
-  ifeq ($(my_sanitize),)
-    my_sanitize := $(strip $(SANITIZE_HOST))
+# Never always wins.
+ifeq ($(LOCAL_SANITIZE),never)
+  my_sanitize :=
+endif
 
-    # SANTIZIZE_HOST=true is a deprecated way to say SANITIZE_HOST=address.
-    ifeq ($(my_sanitize),true)
-      my_sanitize := address
-    endif
-
-    # SANITIZE_HOST is only in effect if the module is already using clang (host
-    # modules that haven't set `LOCAL_CLANG := false` and device modules that
-    # have set `LOCAL_CLANG := true`.
-    ifneq ($(my_clang),true)
-      my_sanitize :=
+# TSAN is not supported on 32-bit architectures. For non-multilib cases, make
+# its use an error. For multilib cases, don't use it for the 32-bit case.
+ifneq ($(filter thread,$(my_sanitize)),)
+  ifeq ($(my_32_64_bit_suffix),32)
+    ifeq ($(my_module_multilib),both)
+        my_sanitize := $(filter-out thread,$(my_sanitize))
+    else
+        $(error $(LOCAL_PATH): $(LOCAL_MODULE): TSAN cannot be used for 32-bit modules.)
     endif
   endif
 endif
 
-ifeq ($(my_sanitize),never)
-  my_sanitize :=
+# Undefined symbols can occur if a non-sanitized library links
+# sanitized static libraries. That's OK, because the executable
+# always depends on the ASan runtime library, which defines these
+# symbols.
+ifneq ($(strip $(SANITIZE_TARGET)),)
+  ifndef LOCAL_IS_HOST_MODULE
+    ifeq ($(LOCAL_MODULE_CLASS),SHARED_LIBRARIES)
+      ifeq ($(my_sanitize),)
+        my_allow_undefined_symbols := true
+      endif
+    endif
+    # Workaround for a bug in AddressSanitizer that breaks stack unwinding.
+    # https://code.google.com/p/address-sanitizer/issues/detail?id=387
+    # Revert when external/compiler-rt is updated past r236014.
+    LOCAL_PACK_MODULE_RELOCATIONS := false
+  endif
 endif
 
 # Sanitizers can only be used with clang.
@@ -52,21 +73,30 @@
 
 ifneq ($(filter default-ub,$(my_sanitize)),)
   my_sanitize := $(CLANG_DEFAULT_UB_CHECKS)
-  my_ldlibs += -ldl
+endif
 
-  ifdef LOCAL_IS_HOST_MODULE
-    my_cflags += -fno-sanitize-recover=all
-  else
-    my_cflags += -fsanitize-undefined-trap-on-error
+ifneq ($(filter coverage,$(my_sanitize)),)
+  ifeq ($(filter address,$(my_sanitize)),)
+    $(error $(LOCAL_PATH): $(LOCAL_MODULE): Use of 'coverage' also requires 'address')
   endif
+  my_cflags += -fsanitize-coverage=edge,indirect-calls,8bit-counters,trace-cmp
+  my_sanitize := $(filter-out coverage,$(my_sanitize))
 endif
 
 ifneq ($(my_sanitize),)
-  fsanitize_arg := $(subst $(space),$(comma),$(my_sanitize)),
+  fsanitize_arg := $(subst $(space),$(comma),$(my_sanitize))
   my_cflags += -fsanitize=$(fsanitize_arg)
 
   ifdef LOCAL_IS_HOST_MODULE
+    my_cflags += -fno-sanitize-recover=all
     my_ldflags += -fsanitize=$(fsanitize_arg)
+    my_ldlibs += -lrt -ldl
+  else
+    ifeq ($(filter address,$(my_sanitize)),)
+      my_cflags += -fsanitize-trap=all
+      my_cflags += -ftrap-function=abort
+    endif
+    my_shared_libraries += libdl
   endif
 endif
 
@@ -78,22 +108,30 @@
   ifdef LOCAL_IS_HOST_MODULE
     # -nodefaultlibs (provided with libc++) prevents the driver from linking
     # libraries needed with -fsanitize=address. http://b/18650275 (WAI)
-    my_ldlibs += -lm -ldl -lpthread
+    my_ldlibs += -lm -lpthread
     my_ldflags += -Wl,--no-as-needed
   else
+    my_cflags += -mllvm -asan-globals=0
     # ASan runtime library must be the first in the link order.
     my_shared_libraries := $($(LOCAL_2ND_ARCH_VAR_PREFIX)ADDRESS_SANITIZER_RUNTIME_LIBRARY) \
                            $(my_shared_libraries) \
                            $(ADDRESS_SANITIZER_CONFIG_EXTRA_SHARED_LIBRARIES)
     my_static_libraries += $(ADDRESS_SANITIZER_CONFIG_EXTRA_STATIC_LIBRARIES)
     my_ldflags += -Wl,-rpath,$($(LOCAL_2ND_ARCH_VAR_PREFIX)ADDRESS_SANITIZER_RPATH)
+
+    my_linker := $($(LOCAL_2ND_ARCH_VAR_PREFIX)ADDRESS_SANITIZER_LINKER)
+    # Make sure linker_asan get installed.
+    $(LOCAL_INSTALLED_MODULE) : | $(PRODUCT_OUT)$($(LOCAL_2ND_ARCH_VAR_PREFIX)ADDRESS_SANITIZER_LINKER)
   endif
 endif
 
 ifneq ($(filter undefined,$(my_sanitize)),)
-  ifdef LOCAL_IS_HOST_MODULE
-    my_ldlibs += -ldl
-  else
+  ifndef LOCAL_IS_HOST_MODULE
     $(error ubsan is not yet supported on the target)
   endif
 endif
+
+ifneq ($(strip $(LOCAL_SANITIZE_RECOVER)),)
+  recover_arg := $(subst $(space),$(comma),$(LOCAL_SANITIZE_RECOVER)),
+  my_cflags += -fsanitize-recover=$(recover_arg)
+endif
diff --git a/core/configure_local_jack.mk b/core/configure_local_jack.mk
index 98b13d2..2270c88 100644
--- a/core/configure_local_jack.mk
+++ b/core/configure_local_jack.mk
@@ -17,7 +17,10 @@
 ifdef ANDROID_FORCE_JACK_ENABLED
 LOCAL_JACK_ENABLED := $(ANDROID_FORCE_JACK_ENABLED)
 endif
+
 LOCAL_JACK_ENABLED := $(strip $(LOCAL_JACK_ENABLED))
+LOCAL_MODULE := $(strip $(LOCAL_MODULE))
+
 ifneq ($(LOCAL_JACK_ENABLED),full)
 ifneq ($(LOCAL_JACK_ENABLED),incremental)
 ifdef LOCAL_JACK_ENABLED
@@ -28,3 +31,9 @@
 LOCAL_JACK_ENABLED :=
 endif
 endif
+
+ifdef $(LOCAL_MODULE).JACK_VERSION
+LOCAL_JACK_VERSION := $($(LOCAL_MODULE).JACK_VERSION)
+else
+LOCAL_JACK_VERSION := $(JACK_DEFAULT_VERSION)
+endif
diff --git a/core/cxx_stl_setup.mk b/core/cxx_stl_setup.mk
index 1493a5b..be8a711 100644
--- a/core/cxx_stl_setup.mk
+++ b/core/cxx_stl_setup.mk
@@ -1,6 +1,6 @@
 #############################################################
 ## Set up flags based on LOCAL_CXX_STL.
-## Input variables: LOCAL_CXX_STL
+## Input variables: LOCAL_CXX_STL, my_prefix
 ## Output variables: My_cflags, my_c_includes, my_shared_libraries, etc.
 #############################################################
 
@@ -8,29 +8,53 @@
 ifeq ($(strip $(LOCAL_CXX_STL)),default)
     ifndef LOCAL_SDK_VERSION
         # Platform code. Select the appropriate STL.
-        ifndef USE_MINGW
-            my_cxx_stl := libc++
-            ifdef LOCAL_IS_HOST_MODULE
-                ifneq (,$(BUILD_HOST_static))
-                    my_cxx_stl := libc++_static
-                endif
+        my_cxx_stl := libc++
+        ifdef LOCAL_IS_HOST_MODULE
+            ifneq (,$(BUILD_HOST_static))
+                my_cxx_stl := libc++_static
             endif
-        else
-            # libc++ is not supported on mingw.
-            my_cxx_stl := libstdc++
+
+            ifeq ($($(my_prefix)OS),windows)
+                # libc++ is not supported on mingw.
+                my_cxx_stl := libstdc++
+            endif
         endif
     else
         my_cxx_stl := ndk
     endif
 else
     my_cxx_stl := $(strip $(LOCAL_CXX_STL))
+    ifdef LOCAL_SDK_VERSION
+        # The NDK has historically used LOCAL_NDK_STL_VARIANT to specify the
+        # STL. An Android.mk that specifies both LOCAL_CXX_STL and
+        # LOCAL_SDK_VERSION will incorrectly try (and most likely fail) to use
+        # the platform STL in an NDK binary. Emit an error to direct the user
+        # toward the correct option.
+        #
+        # Note that we could also accept LOCAL_CXX_STL as an alias for
+        # LOCAL_NDK_STL_VARIANT (and in fact soong does use the same name), but
+        # the two options use different names for the STLs.
+        $(error $(LOCAL_PATH): $(LOCAL_MODULE): Must use LOCAL_NDK_STL_VARIANT rather than LOCAL_CXX_STL for NDK binaries)
+    endif
+    ifdef LOCAL_IS_HOST_MODULE
+        ifeq ($($(my_prefix)OS),windows)
+            ifneq ($(filter $(my_cxx_stl),libc++ libc++_static),)
+                # libc++ is not supported on mingw.
+                my_cxx_stl := libstdc++
+            endif
+        endif
+    endif
 endif
 
 # Yes, this is actually what the clang driver does.
-HOST_linux_dynamic_gcclibs := -lgcc_s -lgcc -lc -lgcc_s -lgcc
-HOST_linux_static_gcclibs := -Wl,--start-group -lgcc -lgcc_eh -lc -Wl,--end-group
-HOST_darwin_dynamic_gcclibs := -lc -lSystem
-HOST_darwin_static_gcclibs := NO_STATIC_HOST_BINARIES_ON_DARWIN
+linux_dynamic_gcclibs := -lgcc_s -lgcc -lc -lgcc_s -lgcc
+linux_static_gcclibs := -Wl,--start-group -lgcc -lgcc_eh -lc -Wl,--end-group
+darwin_dynamic_gcclibs := -lc -lSystem
+darwin_static_gcclibs := NO_STATIC_HOST_BINARIES_ON_DARWIN
+windows_dynamic_gcclibs := \
+    -lmsvcr110 -lmingw32 -lgcc -lmoldname -lmingwex -lmsvcrt -ladvapi32 \
+    -lshell32 -luser32 -lkernel32 -lmingw32 -lgcc -lmoldname -lmingwex -lmsvcrt
+windows_static_gcclibs := NO_STATIC_HOST_BINARIES_ON_WINDOWS
 
 my_link_type := dynamic
 ifdef LOCAL_IS_HOST_MODULE
@@ -48,7 +72,6 @@
 
 ifneq ($(filter $(my_cxx_stl),libc++ libc++_static),)
     my_cflags += -D_USING_LIBCXX
-    my_c_includes += external/libcxx/include
 
     # Note that the structure of this means that LOCAL_CXX_STL := libc++ will
     # use the static libc++ for static executables.
@@ -66,7 +89,7 @@
         my_cppflags += -nostdinc++
         my_ldflags += -nodefaultlibs
         my_ldlibs += -lpthread -lm
-        my_ldlibs += $($(my_prefix)$(HOST_OS)_$(my_link_type)_gcclibs)
+        my_ldlibs += $($($(my_prefix)OS)_$(my_link_type)_gcclibs)
     else
         ifeq (arm,$($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH))
             my_static_libraries += libunwind_llvm
@@ -96,7 +119,7 @@
     ifdef LOCAL_IS_HOST_MODULE
         my_cppflags += -nostdinc++
         my_ldflags += -nodefaultlibs
-        my_ldlibs += $($(my_prefix)$(HOST_OS)_$(my_link_type)_gcclibs)
+        my_ldlibs += $($($(my_prefix)OS)_$(my_link_type)_gcclibs)
     endif
 else
     $(error $(LOCAL_PATH): $(LOCAL_MODULE): $(my_cxx_stl) is not a supported STL.)
diff --git a/core/definitions.mk b/core/definitions.mk
index 9df23fd..0089865 100644
--- a/core/definitions.mk
+++ b/core/definitions.mk
@@ -87,11 +87,17 @@
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_DEPENDENCIES_ON_SHARED_LIBRARIES :=
 HOST_DEPENDENCIES_ON_SHARED_LIBRARIES :=
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_DEPENDENCIES_ON_SHARED_LIBRARIES :=
+HOST_CROSS_DEPENDENCIES_ON_SHARED_LIBRARIES :=
 
 # Generated class file names for Android resource.
 # They are escaped and quoted so can be passed safely to a bash command.
 ANDROID_RESOURCE_GENERATED_CLASSES := 'R.class' 'R$$*.class' 'Manifest.class' 'Manifest$$*.class'
 
+# Display names for various build targets
+TARGET_DISPLAY := target
+HOST_DISPLAY := host
+HOST_CROSS_DISPLAY := host cross
+
 ###########################################################
 ## Debugging; prints a variable list to stdout
 ###########################################################
@@ -126,6 +132,7 @@
 define my-dir
 $(strip \
   $(eval LOCAL_MODULE_MAKEFILE := $$(lastword $$(MAKEFILE_LIST))) \
+  $(eval LOCAL_MODULE_MAKEFILE_DEP := $(if $(BUILDING_WITH_NINJA),,$$(LOCAL_MODULE_MAKEFILE))) \
   $(if $(filter $(BUILD_SYSTEM)/% $(OUT_DIR)/%,$(LOCAL_MODULE_MAKEFILE)), \
     $(error my-dir must be called before including any other makefile.) \
    , \
@@ -139,7 +146,7 @@
 ###########################################################
 
 define all-makefiles-under
-$(wildcard $(1)/*/Android.mk)
+$(sort $(wildcard $(1)/*/Android.mk))
 endef
 
 ###########################################################
@@ -171,7 +178,7 @@
 
 # $(1): List of directories to look for under this directory
 define all-named-subdir-makefiles
-$(wildcard $(addsuffix /Android.mk, $(addprefix $(call my-dir)/,$(1))))
+$(sort $(wildcard $(addsuffix /Android.mk, $(addprefix $(call my-dir)/,$(1)))))
 endef
 
 ###########################################################
@@ -424,7 +431,7 @@
 
 define find-parent-file
 $(strip \
-  $(eval _fpf := $(wildcard $(foreach f, $(2), $(strip $(1))/$(f)))) \
+  $(eval _fpf := $(sort $(wildcard $(foreach f, $(2), $(strip $(1))/$(f))))) \
   $(if $(_fpf),$(_fpf), \
        $(if $(filter-out ./ .,$(1)), \
              $(call find-parent-file,$(patsubst %/,%,$(dir $(1))),$(2)) \
@@ -461,7 +468,8 @@
 # $(2): target name, like "NotePad"
 # $(3): if non-empty, this is a HOST target.
 # $(4): if non-empty, force the intermediates to be COMMON
-# $(5): if non-empty, force the intermedistes to be for the 2nd arch
+# $(5): if non-empty, force the intermediates to be for the 2nd arch
+# $(6): if non-empty, force the intermediates to be for the host cross os
 define intermediates-dir-for
 $(strip \
     $(eval _idfClass := $(strip $(1))) \
@@ -470,7 +478,7 @@
     $(eval _idfName := $(strip $(2))) \
     $(if $(_idfName),, \
         $(error $(LOCAL_PATH): Name not defined in call to intermediates-dir-for)) \
-    $(eval _idfPrefix := $(if $(strip $(3)),HOST,TARGET)) \
+    $(eval _idfPrefix := $(if $(strip $(3)),$(if $(strip $(6)),HOST_CROSS,HOST),TARGET)) \
     $(eval _idf2ndArchPrefix := $(if $(strip $(5)),$(TARGET_2ND_ARCH_VAR_PREFIX))) \
     $(if $(filter $(_idfPrefix)-$(_idfClass),$(COMMON_MODULE_CLASSES))$(4), \
         $(eval _idfIntBase := $($(_idfPrefix)_OUT_COMMON_INTERMEDIATES)) \
@@ -488,13 +496,14 @@
 #
 # $(1): if non-empty, force the intermediates to be COMMON
 # $(2): if non-empty, force the intermediates to be for the 2nd arch
+# $(3): if non-empty, force the intermediates to be for the host cross os
 define local-intermediates-dir
 $(strip \
     $(if $(strip $(LOCAL_MODULE_CLASS)),, \
         $(error $(LOCAL_PATH): LOCAL_MODULE_CLASS not defined before call to local-intermediates-dir)) \
     $(if $(strip $(LOCAL_MODULE)),, \
         $(error $(LOCAL_PATH): LOCAL_MODULE not defined before call to local-intermediates-dir)) \
-    $(call intermediates-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(LOCAL_IS_HOST_MODULE),$(1),$(2)) \
+    $(call intermediates-dir-for,$(LOCAL_MODULE_CLASS),$(LOCAL_MODULE),$(LOCAL_IS_HOST_MODULE),$(1),$(2),$(3)) \
 )
 endef
 
@@ -841,51 +850,12 @@
 define pretty
 @echo $1
 endef
-hide := @
 else
 define pretty
 endef
-hide :=
 endif
 
 ###########################################################
-## Dump the variables that are associated with targets
-###########################################################
-
-define dump-module-variables
-@echo all_dependencies=$^
-@echo PRIVATE_YACCFLAGS=$(PRIVATE_YACCFLAGS);
-@echo PRIVATE_CFLAGS=$(PRIVATE_CFLAGS);
-@echo PRIVATE_CPPFLAGS=$(PRIVATE_CPPFLAGS);
-@echo PRIVATE_DEBUG_CFLAGS=$(PRIVATE_DEBUG_CFLAGS);
-@echo PRIVATE_C_INCLUDES=$(PRIVATE_C_INCLUDES);
-@echo PRIVATE_LDFLAGS=$(PRIVATE_LDFLAGS);
-@echo PRIVATE_LDLIBS=$(PRIVATE_LDLIBS);
-@echo PRIVATE_ARFLAGS=$(PRIVATE_ARFLAGS);
-@echo PRIVATE_AAPT_FLAGS=$(PRIVATE_AAPT_FLAGS);
-@echo PRIVATE_DX_FLAGS=$(PRIVATE_DX_FLAGS);
-@echo PRIVATE_JAVACFLAGS=$(PRIVATE_JAVACFLAGS);
-@echo PRIVATE_JAVA_LIBRARIES=$(PRIVATE_JAVA_LIBRARIES);
-@echo PRIVATE_ALL_SHARED_LIBRARIES=$(PRIVATE_ALL_SHARED_LIBRARIES);
-@echo PRIVATE_ALL_STATIC_LIBRARIES=$(PRIVATE_ALL_STATIC_LIBRARIES);
-@echo PRIVATE_ALL_WHOLE_STATIC_LIBRARIES=$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES);
-@echo PRIVATE_ALL_OBJECTS=$(PRIVATE_ALL_OBJECTS);
-@echo PRIVATE_NO_CRT=$(PRIVATE_NO_CRT);
-endef
-
-###########################################################
-## Commands for using sed to replace given variable values
-###########################################################
-
-define transform-variables
-@mkdir -p $(dir $@)
-@echo "Sed: $(if $(PRIVATE_MODULE),$(PRIVATE_MODULE),$@) <= $<"
-$(hide) sed $(foreach var,$(REPLACE_VARS),-e "s/{{$(var)}}/$(subst /,\/,$(PWD)/$($(var)))/g") $< >$@
-$(hide) if [ "$(suffix $@)" = ".sh" ]; then chmod a+rx $@; fi
-endef
-
-
-###########################################################
 ## Commands for munging the dependency files GCC generates
 ###########################################################
 # $(1): the input .d file
@@ -906,8 +876,8 @@
 ###########################################################
 
 define transform-l-to-cpp
-@mkdir -p $(dir $@)
 @echo "Lex: $(PRIVATE_MODULE) <= $<"
+@mkdir -p $(dir $@)
 $(hide) $(LEX) -o$@ $<
 endef
 
@@ -920,8 +890,8 @@
 ###########################################################
 
 define transform-y-to-cpp
-@mkdir -p $(dir $@)
 @echo "Yacc: $(PRIVATE_MODULE) <= $<"
+@mkdir -p $(dir $@)
 $(YACC) $(PRIVATE_YACCFLAGS) -o $@ $<
 touch $(@:$1=$(YACC_HEADER_SUFFIX))
 echo '#ifndef '$(@F:$1=_h) > $(@:$1=.h)
@@ -981,6 +951,7 @@
   -d $(PRIVATE_RS_OUTPUT_DIR) \
   -a $@ -MD \
   -reflect-c++ \
+  $(addprefix -target-api , $(PRIVATE_RS_TARGET_API)) \
   $(PRIVATE_RS_FLAGS) \
   $(addprefix -I , $(PRIVATE_RS_INCLUDES)) \
   $(PRIVATE_RS_SOURCE_FILES)
@@ -1045,22 +1016,48 @@
 ## Commands for running protoc to compile .proto into .pb.cc (or.pb.c) and .pb.h
 ######################################################################
 define transform-proto-to-cc
-@mkdir -p $(dir $@)
 @echo "Protoc: $@ <= $<"
+@mkdir -p $(dir $@)
 $(hide) $(PROTOC) \
 	$(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \
 	$(PRIVATE_PROTOC_FLAGS) \
 	$<
 endef
 
+
+######################################################################
+## Commands for generating DBus adaptors from .dbus-xml files.
+######################################################################
+define generate-dbus-adaptors
+@echo "Generating DBus adaptors for $(PRIVATE_MODULE)"
+@mkdir -p $(dir $@)
+$(hide) $(DBUS_GENERATOR) \
+	--service-config=$(PRIVATE_DBUS_SERVICE_CONFIG) \
+	--adaptor=$@ \
+	$<
+endef
+
+######################################################################
+## Commands for generating DBus proxies from .dbus-xml files.
+######################################################################
+define generate-dbus-proxies
+@echo "Generating DBus proxies for $(PRIVATE_MODULE)"
+@mkdir -p $(dir $@)
+$(hide) $(DBUS_GENERATOR) \
+	--service-config=$(PRIVATE_DBUS_SERVICE_CONFIG) \
+	--proxy=$@ \
+	$(filter %.dbus-xml,$^)
+endef
+
+
 ###########################################################
 ## Commands for running gcc to compile a C++ file
 ###########################################################
 
 define transform-cpp-to-o
-@mkdir -p $(dir $@)
 @echo "target $(PRIVATE_ARM_MODE) C++: $(PRIVATE_MODULE) <= $<"
-$(hide) $(PRIVATE_CXX) \
+@mkdir -p $(dir $@)
+$(hide) $(RELATIVE_PWD) $(PRIVATE_CXX) \
 	$(addprefix -I , $(PRIVATE_C_INCLUDES)) \
 	$(shell cat $(PRIVATE_IMPORT_INCLUDES)) \
 	$(addprefix -isystem ,\
@@ -1078,8 +1075,8 @@
 	$(PRIVATE_CFLAGS) \
 	$(PRIVATE_CPPFLAGS) \
 	$(PRIVATE_DEBUG_CFLAGS) \
-	$(GLOBAL_CFLAGS_NO_OVERRIDE) \
-	$(GLOBAL_CPPFLAGS_NO_OVERRIDE) \
+	$(PRIVATE_CFLAGS_NO_OVERRIDE) \
+	$(PRIVATE_CPPFLAGS_NO_OVERRIDE) \
 	-MD -MF $(patsubst %.o,%.d,$@) -o $@ $<
 $(transform-d-to-p)
 endef
@@ -1092,7 +1089,7 @@
 # $(1): extra flags
 define transform-c-or-s-to-o-no-deps
 @mkdir -p $(dir $@)
-$(hide) $(PRIVATE_CC) \
+$(hide) $(RELATIVE_PWD) $(PRIVATE_CC) \
 	$(addprefix -I , $(PRIVATE_C_INCLUDES)) \
 	$(shell cat $(PRIVATE_IMPORT_INCLUDES)) \
 	$(addprefix -isystem ,\
@@ -1116,7 +1113,7 @@
     $(PRIVATE_CFLAGS) \
     $(PRIVATE_CONLYFLAGS) \
     $(PRIVATE_DEBUG_CFLAGS) \
-    $(GLOBAL_CFLAGS_NO_OVERRIDE))
+    $(PRIVATE_CFLAGS_NO_OVERRIDE))
 endef
 
 define transform-s-to-o-no-deps
@@ -1165,15 +1162,15 @@
 ###########################################################
 
 define transform-host-cpp-to-o
+@echo "$($(PRIVATE_PREFIX)DISPLAY) C++: $(PRIVATE_MODULE) <= $<"
 @mkdir -p $(dir $@)
-@echo "host C++: $(PRIVATE_MODULE) <= $<"
-$(hide) $(PRIVATE_CXX) \
+$(hide) $(RELATIVE_PWD) $(PRIVATE_CXX) \
 	$(addprefix -I , $(PRIVATE_C_INCLUDES)) \
 	$(shell cat $(PRIVATE_IMPORT_INCLUDES)) \
 	$(addprefix -isystem ,\
 	    $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
 	        $(filter-out $(PRIVATE_C_INCLUDES), \
-	            $(HOST_PROJECT_INCLUDES) \
+	            $($(PRIVATE_PREFIX)PROJECT_INCLUDES) \
 	            $(PRIVATE_HOST_C_INCLUDES)))) \
 	-c \
 	$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
@@ -1183,6 +1180,8 @@
 	$(PRIVATE_CFLAGS) \
 	$(PRIVATE_CPPFLAGS) \
 	$(PRIVATE_DEBUG_CFLAGS) \
+	$(PRIVATE_CFLAGS_NO_OVERRIDE) \
+	$(PRIVATE_CPPFLAGS_NO_OVERRIDE) \
 	-MD -MF $(patsubst %.o,%.d,$@) -o $@ $<
 $(transform-d-to-p)
 endef
@@ -1195,13 +1194,13 @@
 # $(1): extra flags
 define transform-host-c-or-s-to-o-no-deps
 @mkdir -p $(dir $@)
-$(hide) $(PRIVATE_CC) \
+$(hide) $(RELATIVE_PWD) $(PRIVATE_CC) \
 	$(addprefix -I , $(PRIVATE_C_INCLUDES)) \
 	$(shell cat $(PRIVATE_IMPORT_INCLUDES)) \
 	$(addprefix -isystem ,\
 	    $(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
 	        $(filter-out $(PRIVATE_C_INCLUDES), \
-	            $(HOST_PROJECT_INCLUDES) \
+	            $($(PRIVATE_PREFIX)PROJECT_INCLUDES) \
 	            $(PRIVATE_HOST_C_INCLUDES)))) \
 	-c \
 	$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
@@ -1209,16 +1208,17 @@
 	    $(PRIVATE_HOST_GLOBAL_CONLYFLAGS) \
 	 ) \
 	$(1) \
+	$(PRIVATE_CFLAGS_NO_OVERRIDE) \
 	-MD -MF $(patsubst %.o,%.d,$@) -o $@ $<
 endef
 
 define transform-host-c-to-o-no-deps
-@echo "host C: $(PRIVATE_MODULE) <= $<"
+@echo "$($(PRIVATE_PREFIX)DISPLAY) C: $(PRIVATE_MODULE) <= $<"
 $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_CONLYFLAGS) $(PRIVATE_DEBUG_CFLAGS))
 endef
 
 define transform-host-s-to-o-no-deps
-@echo "host asm: $(PRIVATE_MODULE) <= $<"
+@echo "$($(PRIVATE_PREFIX)DISPLAY) asm: $(PRIVATE_MODULE) <= $<"
 $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_ASFLAGS))
 endef
 
@@ -1237,7 +1237,7 @@
 ###########################################################
 
 define transform-host-m-to-o-no-deps
-@echo "host ObjC: $(PRIVATE_MODULE) <= $<"
+@echo "$($(PRIVATE_PREFIX)DISPLAY) ObjC: $(PRIVATE_MODULE) <= $<"
 $(call transform-host-c-or-s-to-o-no-deps, $(PRIVATE_CFLAGS) $(PRIVATE_DEBUG_CFLAGS))
 endef
 
@@ -1246,6 +1246,14 @@
 $(transform-d-to-p)
 endef
 
+###########################################################
+## Commands for running gcc to compile a host Objective-C++ file
+###########################################################
+
+define transform-host-mm-to-o
+$(transform-host-cpp-to-o)
+endef
+
 
 ###########################################################
 ## Rules to compile a single C/C++ source with ../ in the path
@@ -1330,7 +1338,6 @@
 
 # $(1): the full path of the source static library.
 define _extract-and-include-single-target-whole-static-lib
-@echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(strip $(1))]"
 $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\
     rm -rf $$ldir; \
     mkdir -p $$ldir; \
@@ -1358,7 +1365,6 @@
 # $(1): the full path of the source static library.
 define extract-and-include-whole-static-libs-first
 $(if $(strip $(1)),
-@echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(strip $(1))]"
 $(hide) cp $(1) $@)
 endef
 
@@ -1371,10 +1377,10 @@
 # Explicitly delete the archive first so that ar doesn't
 # try to add to an existing archive.
 define transform-o-to-static-lib
+@echo "target StaticLib: $(PRIVATE_MODULE) ($@)"
 @mkdir -p $(dir $@)
 @rm -f $@
 $(extract-and-include-target-whole-static-libs)
-@echo "target StaticLib: $(PRIVATE_MODULE) ($@)"
 $(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_AR) \
     $($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_ARFLAGS) \
     $(PRIVATE_ARFLAGS) $@,$(PRIVATE_ALL_OBJECTS))
@@ -1386,7 +1392,6 @@
 
 # $(1): the full path of the source static library.
 define _extract-and-include-single-host-whole-static-lib
-@echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(strip $(1))]"
 $(hide) ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(1)))_objs;\
     rm -rf $$ldir; \
     mkdir -p $$ldir; \
@@ -1394,19 +1399,19 @@
     lib_to_include=$$ldir/$(notdir $(1)); \
     filelist=; \
     subdir=0; \
-    for f in `$($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_AR) t $(1) | \grep '\.o$$'`; do \
+    for f in `$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) t $(1) | \grep '\.o$$'`; do \
         if [ -e $$ldir/$$f ]; then \
            mkdir $$ldir/$$subdir; \
            ext=$$subdir/; \
            subdir=$$((subdir+1)); \
-           $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_AR) m $$lib_to_include $$f; \
+           $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) m $$lib_to_include $$f; \
         else \
            ext=; \
         fi; \
-        $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_AR) p $$lib_to_include $$f > $$ldir/$$ext$$f; \
+        $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) p $$lib_to_include $$f > $$ldir/$$ext$$f; \
         filelist="$$filelist $$ldir/$$ext$$f"; \
     done ; \
-    $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_ARFLAGS) \
+    $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_ARFLAGS) \
         $(PRIVATE_ARFLAGS) $@ $$filelist
 
 endef
@@ -1420,12 +1425,12 @@
 # Explicitly delete the archive first so that ar doesn't
 # try to add to an existing archive.
 define transform-host-o-to-static-lib
+@echo "$($(PRIVATE_PREFIX)DISPLAY) StaticLib: $(PRIVATE_MODULE) ($@)"
 @mkdir -p $(dir $@)
 @rm -f $@
 $(extract-and-include-host-whole-static-libs)
-@echo "host StaticLib: $(PRIVATE_MODULE) ($@)"
-$(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_AR) \
-    $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_ARFLAGS) \
+$(call split-long-arguments,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)AR) \
+    $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_ARFLAGS) \
     $(PRIVATE_ARFLAGS) $@,$(PRIVATE_ALL_OBJECTS))
 endef
 
@@ -1439,11 +1444,11 @@
 ifneq ($(HOST_CUSTOM_LD_COMMAND),true)
 define transform-host-o-to-shared-lib-inner
 $(hide) $(PRIVATE_CXX) \
-	-Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATE_LIBRARIES) \
-	-Wl,-rpath,\$$ORIGIN/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES)) \
-	-Wl,-rpath,\$$ORIGIN/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES)) \
+	-Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_INTERMEDIATE_LIBRARIES) \
+	-Wl,-rpath,\$$ORIGIN/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \
+	-Wl,-rpath,\$$ORIGIN/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \
 	-shared -Wl,-soname,$(notdir $@) \
-	$($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_LD_DIRS) \
+	$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_LD_DIRS) \
 	$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
 	   $(PRIVATE_HOST_GLOBAL_LDFLAGS) \
 	) \
@@ -1464,14 +1469,14 @@
 endif
 
 define transform-host-o-to-shared-lib
+@echo "$($(PRIVATE_PREFIX)DISPLAY) SharedLib: $(PRIVATE_MODULE) ($@)"
 @mkdir -p $(dir $@)
-@echo "host SharedLib: $(PRIVATE_MODULE) ($@)"
 $(transform-host-o-to-shared-lib-inner)
 endef
 
 define transform-host-o-to-package
+@echo "$($(PRIVATE_PREFIX)DISPLAY) Package: $(PRIVATE_MODULE) ($@)"
 @mkdir -p $(dir $@)
-@echo "host Package: $(PRIVATE_MODULE) ($@)"
 $(transform-host-o-to-shared-lib-inner)
 endef
 
@@ -1486,7 +1491,7 @@
 	-Wl,--gc-sections \
 	$(if $(filter true,$(PRIVATE_CLANG)),-shared,-Wl$(comma)-shared) \
 	$(PRIVATE_TARGET_GLOBAL_LD_DIRS) \
-	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTBEGIN_SO_O)) \
+	$(PRIVATE_TARGET_CRTBEGIN_SO_O) \
 	$(PRIVATE_ALL_OBJECTS) \
 	-Wl,--whole-archive \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
@@ -1494,25 +1499,23 @@
 	$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
-	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBGCOV)) \
-	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBPROFILE_RT)) \
+	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \
 	$(PRIVATE_TARGET_LIBATOMIC) \
 	$(PRIVATE_TARGET_LIBGCC) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
 	-o $@ \
 	$(PRIVATE_TARGET_GLOBAL_LDFLAGS) \
 	$(PRIVATE_LDFLAGS) \
-	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTEND_SO_O)) \
+	$(PRIVATE_TARGET_CRTEND_SO_O) \
 	$(PRIVATE_LDLIBS)
 endef
 
 define transform-o-to-shared-lib
-@mkdir -p $(dir $@)
 @echo "target SharedLib: $(PRIVATE_MODULE) ($@)"
+@mkdir -p $(dir $@)
 $(transform-o-to-shared-lib-inner)
 endef
 
-
 ###########################################################
 ## Commands for filtering a target executable or library
 ###########################################################
@@ -1523,15 +1526,15 @@
 endif
 
 define transform-to-stripped
-@mkdir -p $(dir $@)
 @echo "target Strip: $(PRIVATE_MODULE) ($@)"
+@mkdir -p $(dir $@)
 $(hide) $(PRIVATE_STRIP) --strip-all $< -o $@ \
   $(if $(PRIVATE_NO_DEBUGLINK),,$(TARGET_STRIP_EXTRA))
 endef
 
 define transform-to-stripped-keep-symbols
-@mkdir -p $(dir $@)
 @echo "target Strip (keep symbols): $(PRIVATE_MODULE) ($@)"
+@mkdir -p $(dir $@)
 $(hide) $(PRIVATE_OBJCOPY) \
     `$(PRIVATE_READELF) -S $< | awk '/.debug_/ {print "-R " $$2}' | xargs` \
     $(TARGET_STRIP_KEEP_SYMBOLS_EXTRA) $< $@
@@ -1542,8 +1545,8 @@
 ###########################################################
 
 define pack-elf-relocations
-$(copy-file-to-target)
 @echo "target Pack Relocations: $(PRIVATE_MODULE) ($@)"
+$(copy-file-to-target)
 $(hide) $(RELOCATION_PACKER) $@
 endef
 
@@ -1554,12 +1557,12 @@
 define transform-o-to-executable-inner
 $(hide) $(PRIVATE_CXX) -pie \
 	-nostdlib -Bdynamic \
-	-Wl,-dynamic-linker,$($(PRIVATE_2ND_ARCH_VAR_PREFIX)TARGET_LINKER) \
+	-Wl,-dynamic-linker,$(PRIVATE_LINKER) \
 	-Wl,--gc-sections \
 	-Wl,-z,nocopyreloc \
 	$(PRIVATE_TARGET_GLOBAL_LD_DIRS) \
 	-Wl,-rpath-link=$(PRIVATE_TARGET_OUT_INTERMEDIATE_LIBRARIES) \
-	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTBEGIN_DYNAMIC_O)) \
+	$(PRIVATE_TARGET_CRTBEGIN_DYNAMIC_O) \
 	$(PRIVATE_ALL_OBJECTS) \
 	-Wl,--whole-archive \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
@@ -1567,21 +1570,20 @@
 	$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--start-group) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(if $(PRIVATE_GROUP_STATIC_LIBRARIES),-Wl$(comma)--end-group) \
-	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBGCOV)) \
-	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBPROFILE_RT)) \
+	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \
 	$(PRIVATE_TARGET_LIBATOMIC) \
 	$(PRIVATE_TARGET_LIBGCC) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
 	-o $@ \
 	$(PRIVATE_TARGET_GLOBAL_LDFLAGS) \
 	$(PRIVATE_LDFLAGS) \
-	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTEND_O)) \
+	$(PRIVATE_TARGET_CRTEND_O) \
 	$(PRIVATE_LDLIBS)
 endef
 
 define transform-o-to-executable
-@mkdir -p $(dir $@)
 @echo "target Executable: $(PRIVATE_MODULE) ($@)"
+@mkdir -p $(dir $@)
 $(transform-o-to-executable-inner)
 endef
 
@@ -1603,7 +1605,7 @@
 	-Wl,--gc-sections \
 	-o $@ \
 	$(PRIVATE_TARGET_GLOBAL_LD_DIRS) \
-	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTBEGIN_STATIC_O)) \
+	$(PRIVATE_TARGET_CRTBEGIN_STATIC_O) \
 	$(PRIVATE_TARGET_GLOBAL_LDFLAGS) \
 	$(PRIVATE_LDFLAGS) \
 	$(PRIVATE_ALL_OBJECTS) \
@@ -1614,18 +1616,17 @@
 	-Wl,--start-group \
 	$(call normalize-target-libraries,$(filter %libc.a,$(PRIVATE_ALL_STATIC_LIBRARIES))) \
 	$(call normalize-target-libraries,$(filter %libc_nomalloc.a,$(PRIVATE_ALL_STATIC_LIBRARIES))) \
-	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBGCOV)) \
-	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_LIBPROFILE_RT)) \
+	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_TARGET_COVERAGE_LIB)) \
 	$(PRIVATE_TARGET_LIBATOMIC) \
 	$(call normalize-target-libraries,$(filter %libcompiler_rt.a,$(PRIVATE_ALL_STATIC_LIBRARIES))) \
 	$(PRIVATE_TARGET_LIBGCC) \
 	-Wl,--end-group \
-	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTEND_O))
+	$(PRIVATE_TARGET_CRTEND_O)
 endef
 
 define transform-o-to-static-executable
-@mkdir -p $(dir $@)
 @echo "target StaticExecutable: $(PRIVATE_MODULE) ($@)"
+@mkdir -p $(dir $@)
 $(transform-o-to-static-executable-inner)
 endef
 
@@ -1638,8 +1639,8 @@
 else
 HOST_FPIE_FLAGS := -pie
 # Force the correct entry point to workaround a bug in binutils that manifests with -pie
-ifeq ($(HOST_OS),windows)
-HOST_FPIE_FLAGS += -Wl,-e_mainCRTStartup
+ifeq ($(HOST_CROSS_OS),windows)
+HOST_CROSS_FPIE_FLAGS += -Wl,-e_mainCRTStartup
 endif
 endif
 
@@ -1656,10 +1657,10 @@
 	$(if $(filter true,$(NATIVE_COVERAGE)),-lgcov) \
 	$(if $(filter true,$(NATIVE_COVERAGE)),$(PRIVATE_HOST_LIBPROFILE_RT)) \
 	$(call normalize-host-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-	-Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATE_LIBRARIES) \
-	-Wl,-rpath,\$$ORIGIN/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES)) \
-	-Wl,-rpath,\$$ORIGIN/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES)) \
-	$($(PRIVATE_2ND_ARCH_VAR_PREFIX)HOST_GLOBAL_LD_DIRS) \
+	-Wl,-rpath-link=$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_INTERMEDIATE_LIBRARIES) \
+	-Wl,-rpath,\$$ORIGIN/../$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \
+	-Wl,-rpath,\$$ORIGIN/$(notdir $($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)OUT_SHARED_LIBRARIES)) \
+	$($(PRIVATE_2ND_ARCH_VAR_PREFIX)$(PRIVATE_PREFIX)GLOBAL_LD_DIRS) \
 	$(if $(PRIVATE_NO_DEFAULT_COMPILER_FLAGS),, \
 		$(PRIVATE_HOST_GLOBAL_LDFLAGS) \
 	) \
@@ -1670,8 +1671,8 @@
 endif
 
 define transform-host-o-to-executable
+@echo "$($(PRIVATE_PREFIX)DISPLAY) Executable: $(PRIVATE_MODULE) ($@)"
 @mkdir -p $(dir $@)
-@echo "host Executable: $(PRIVATE_MODULE) ($@)"
 $(transform-host-o-to-executable-inner)
 endef
 
@@ -1682,7 +1683,7 @@
 
 # Add BUILD_NUMBER to apps default version name if it's unbundled build.
 ifdef TARGET_BUILD_APPS
-APPS_DEFAULT_VERSION_NAME := $(PLATFORM_VERSION)-$(BUILD_NUMBER)
+APPS_DEFAULT_VERSION_NAME := $(PLATFORM_VERSION)-$(BUILD_NUMBER_FROM_FILE)
 else
 APPS_DEFAULT_VERSION_NAME := $(PLATFORM_VERSION)
 endif
@@ -1719,11 +1720,7 @@
     --skip-symbols-without-default-localization
 endef
 
-ifeq ($(HOST_OS),windows)
-xlint_unchecked :=
-else
 xlint_unchecked := -Xlint:unchecked
-endif
 
 # emit-line, <word list>, <output file>
 define emit-line
@@ -1733,6 +1730,7 @@
 # dump-words-to-file, <word list>, <output file>
 define dump-words-to-file
         @rm -f $(2)
+        @touch $(2)
         @$(call emit-line,$(wordlist 1,200,$(1)),$(2))
         @$(call emit-line,$(wordlist 201,400,$(1)),$(2))
         @$(call emit-line,$(wordlist 401,600,$(1)),$(2))
@@ -1778,6 +1776,12 @@
   $(if $(PRIVATE_DONT_DELETE_JAR_META_INF),,;rm -rf $(2)/META-INF)
 endef
 
+# Call jack
+#
+define call-jack
+ JACK_VERSION=$(PRIVATE_JACK_VERSION) $(JACK) $(DEFAULT_JACK_EXTRA_ARGS)
+endef
+
 # Common definition to invoke javac on the host and target.
 #
 # Some historical notes:
@@ -1796,13 +1800,12 @@
 $(call unzip-jar-files,$(PRIVATE_STATIC_JAVA_LIBRARIES),$(PRIVATE_CLASS_INTERMEDIATES_DIR))
 $(call dump-words-to-file,$(PRIVATE_JAVA_SOURCES),$(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list)
 $(hide) if [ -d "$(PRIVATE_SOURCE_INTERMEDIATES_DIR)" ]; then \
-          find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' >> $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list; \
+          find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' -and -not -name '.*' >> $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list; \
 fi
 $(hide) tr ' ' '\n' < $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list \
-    | sort -u > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq
+    | $(NORMALIZE_PATH) | sort -u > $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq
 $(hide) if [ -s $(PRIVATE_CLASS_INTERMEDIATES_DIR)/java-source-list-uniq ] ; then \
     $(1) -encoding UTF-8 \
-    $(strip $(PRIVATE_JAVAC_DEBUG_FLAGS)) \
     $(if $(findstring true,$(PRIVATE_WARNINGS_ENABLE)),$(xlint_unchecked),) \
     $(2) \
     $(addprefix -classpath ,$(strip \
@@ -1831,7 +1834,7 @@
         $(PRIVATE_CLASS_INTERMEDIATES_DIR)/$(subst .,/,$(pkg))))
 $(if $(PRIVATE_RMTYPEDEFS), $(hide) $(RMTYPEDEFS) -v $(PRIVATE_CLASS_INTERMEDIATES_DIR))
 $(if $(PRIVATE_JAR_MANIFEST), \
-    $(hide) sed -e 's/%BUILD_NUMBER%/$(BUILD_NUMBER)/' \
+    $(hide) sed -e "s/%BUILD_NUMBER%/$(BUILD_NUMBER_FROM_FILE)/" \
             $(PRIVATE_JAR_MANIFEST) > $(dir $@)/manifest.mf && \
         jar -cfm $@ $(dir $@)/manifest.mf \
             -C $(PRIVATE_CLASS_INTERMEDIATES_DIR) ., \
@@ -1863,7 +1866,7 @@
           find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' >> $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list; \
 fi
 $(hide) tr ' ' '\n' < $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list \
-    | sort -u > $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq
+    | $(NORMALIZE_PATH) | sort -u > $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq
 $(if $(PRIVATE_JACK_PROGUARD_FLAGS), \
     $(hide) echo -basedirectory $(CURDIR) > $@.flags; \
     echo $(PRIVATE_JACK_PROGUARD_FLAGS) >> $@.flags; \
@@ -1879,9 +1882,8 @@
 else \
     export tmpEcjArg=""; \
 fi; \
-$(call call-jack,$(PRIVATE_JACK_VM_ARGS),$(PRIVATE_JACK_EXTRA_ARGS)) \
+$(call call-jack) \
     $(strip $(PRIVATE_JACK_FLAGS)) \
-    $(strip $(PRIVATE_JACK_DEBUG_FLAGS)) \
     $(if $(NO_OPTIMIZE_DX), \
         -D jack.dex.optimize="false") \
     $(if $(PRIVATE_RMTYPEDEFS), \
@@ -1899,7 +1901,7 @@
     $(addprefix --config-jarjar ,$(strip $(PRIVATE_JARJAR_RULES))) \
     $(if $(PRIVATE_JACK_PROGUARD_FLAGS),--config-proguard $@.flags) \
     $$tmpEcjArg \
-    || ( rm -rf $(PRIVATE_CLASSES_JACK); rm -rf $(PRIVATE_JACK_INTERMEDIATES_DIR); exit 41 )
+    || ( rm -rf $(PRIVATE_CLASSES_JACK); exit 41 )
 $(hide) mv $(PRIVATE_JACK_INTERMEDIATES_DIR)/classes*.dex $(dir $@)
 $(hide) rm -f $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list
 $(if $(PRIVATE_EXTRA_JAR_ARGS),$(hide) rm -rf $@.res.tmp)
@@ -1915,7 +1917,7 @@
 	$(hide) mkdir -p $@.tmpjill.res
 	$(hide) $(call unzip-jar-files,$<,$@.tmpjill.res)
 	$(hide) find $@.tmpjill.res -iname "*.class" -delete
-	$(hide) $(call call-jack,$(PRIVATE_JACK_VM_ARGS),$(PRIVATE_JACK_EXTRA_ARGS)) \
+	$(hide) $(call call-jack) \
         -D jack.import.resource.policy=keep-first \
         -D jack.import.type.policy=keep-first \
 	    --import $@.tmpjill.jack \
@@ -1943,7 +1945,7 @@
           find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) -name '*.java' >> $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list; \
 fi
 $(hide) tr ' ' '\n' < $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list \
-    | sort -u > $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq
+    | $(NORMALIZE_PATH) | sort -u > $(PRIVATE_JACK_INTERMEDIATES_DIR)/java-source-list-uniq
 $(if $(PRIVATE_JACK_PROGUARD_FLAGS), \
     $(hide) echo -basedirectory $(CURDIR) > $@.flags; \
     echo $(PRIVATE_JACK_PROGUARD_FLAGS) >> $@.flags; \
@@ -1959,9 +1961,8 @@
 else \
     export tmpEcjArg=""; \
 fi; \
-$(call call-jack,$(PRIVATE_JACK_VM_ARGS),$(PRIVATE_JACK_EXTRA_ARGS)) \
+$(call call-jack) \
     $(strip $(PRIVATE_JACK_FLAGS)) \
-    $(strip $(PRIVATE_JACK_DEBUG_FLAGS)) \
     $(if $(NO_OPTIMIZE_DX), \
         -D jack.dex.optimize="false") \
     $(addprefix --classpath ,$(strip \
@@ -1993,13 +1994,12 @@
 
 #TODO: use a smaller -Xmx value for most libraries;
 #      only core.jar and framework.jar need a heap this big.
-# Avoid the memory arguments on Windows, dx fails to load for some reason with them.
 define transform-classes.jar-to-dex
 @echo "target Dex: $(PRIVATE_MODULE)"
 @mkdir -p $(dir $@)
 $(hide) rm -f $(dir $@)classes*.dex
 $(hide) $(DX) \
-    $(if $(findstring windows,$(HOST_OS)),,-JXms16M -JXmx2048M) \
+    -JXms16M -JXmx2048M \
     --dex --output=$(dir $@) \
     $(if $(NO_OPTIMIZE_DX), \
         --no-optimize) \
@@ -2093,13 +2093,13 @@
 $(foreach abi,$(PRIVATE_JNI_SHARED_LIBRARIES_ABI),\
   $(call _add-jni-shared-libs-to-package-per-abi,$(abi),\
     $(patsubst $(abi):%,%,$(filter $(abi):%,$(PRIVATE_JNI_SHARED_LIBRARIES)))))
-$(hide) (cd $(dir $@) && zip -r $(JNI_COMPRESS_FLAGS) $(notdir $@) lib)
+$(hide) (cd $(dir $@) && zip -qrX $(JNI_COMPRESS_FLAGS) $(notdir $@) lib)
 $(hide) rm -rf $(dir $@)lib
 endef
 
 #TODO: update the manifest to point to the dex file
 define add-dex-to-package
-$(hide) zip -qj $@ $(dir $(PRIVATE_DEX_FILE))classes*.dex
+$(hide) find $(dir $(PRIVATE_DEX_FILE)) -maxdepth 1 -name "classes*.dex" | sort | xargs zip -qjX $@
 endef
 
 # Add java resources added by the current module.
@@ -2115,11 +2115,11 @@
 #
 define add-carried-jack-resources
  $(hide) if [ -d $(PRIVATE_JACK_INTERMEDIATES_DIR) ] ; then \
-    jack_res_jar_flags=$$(find $(PRIVATE_JACK_INTERMEDIATES_DIR) -type f \
-        | sed -e "s?^$(PRIVATE_JACK_INTERMEDIATES_DIR)/? -C $(PRIVATE_JACK_INTERMEDIATES_DIR) ?"); \
-    if [ -n "$$jack_res_jar_flags" ] ; then \
-        echo $$jack_res_jar_flags >$(dir $@)jack_res_jar_flags; \
-        jar uf $@ $$jack_res_jar_flags; \
+    find $(PRIVATE_JACK_INTERMEDIATES_DIR) -type f | sort \
+        | sed -e "s?^$(PRIVATE_JACK_INTERMEDIATES_DIR)/? -C \"$(PRIVATE_JACK_INTERMEDIATES_DIR)\" \"?" -e "s/$$/\"/" \
+        > $(dir $@)jack_res_jar_flags; \
+    if [ -s $(dir $@)jack_res_jar_flags ] ; then \
+        jar uf $@ @$(dir $@)jack_res_jar_flags; \
     fi; \
 fi
 endef
@@ -2146,6 +2146,14 @@
 $(hide) mv $@.aligned $@
 endef
 
+# Remove dynamic timestamps from packages
+#
+ifndef TARGET_BUILD_APPS
+define remove-timestamps-from-package
+$(hide) $(ZIPTIME) $@
+endef
+endif
+
 # Uncompress shared libraries embedded in an apk.
 #
 define uncompress-shared-libs
@@ -2153,7 +2161,7 @@
   rm -rf $(dir $@)uncompressedlibs && mkdir $(dir $@)uncompressedlibs; \
   unzip $@ $(PRIVATE_EMBEDDED_JNI_LIBS) -d $(dir $@)uncompressedlibs && \
   zip -d $@ 'lib/*.so' && \
-  ( cd $(dir $@)uncompressedlibs && zip -D -r -0 ../$(notdir $@) lib ) && \
+  ( cd $(dir $@)uncompressedlibs && find lib -type f | sort | zip -D -X -0 ../$(notdir $@) -@ ) && \
   rm -rf $(dir $@)uncompressedlibs; \
   fi
 endef
@@ -2178,7 +2186,7 @@
 # Note: we intentionally don't clean PRIVATE_CLASS_INTERMEDIATES_DIR
 # in transform-java-to-classes for the sake of vm-tests.
 define transform-host-java-to-package
-@echo "host Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))"
+@echo "$($(PRIVATE_PREFIX)DISPLAY) Java: $(PRIVATE_MODULE) ($(PRIVATE_CLASS_INTERMEDIATES_DIR))"
 $(call compile-java,$(HOST_JAVAC),$(PRIVATE_BOOTCLASSPATH))
 endef
 
@@ -2525,12 +2533,13 @@
 endef
 
 # Return the arch for the source file of a prebuilt
-# Return "none" if no matching arch found, so the result can be passed to
+# Return "none" if no matching arch found and return empty
+# if the input is empty, so the result can be passed to
 # LOCAL_MODULE_TARGET_ARCH.
 # $(1) the list of archs supported by the prebuilt
 define get-prebuilt-src-arch
 $(strip $(if $(filter $(TARGET_ARCH),$(1)),$(TARGET_ARCH),\
-  $(if $(filter $(TARGET_2ND_ARCH),$(1)),$(TARGET_2ND_ARCH),none)))
+  $(if $(filter $(TARGET_2ND_ARCH),$(1)),$(TARGET_2ND_ARCH),$(if $(1),none))))
 endef
 
 ###########################################################
@@ -2545,6 +2554,7 @@
 # Include any vendor specific definitions.mk file
 -include $(TOPDIR)vendor/*/build/core/definitions.mk
 -include $(TOPDIR)device/*/build/core/definitions.mk
+-include $(TOPDIR)product/*/build/core/definitions.mk
 
 # broken:
 #	$(foreach file,$^,$(if $(findstring,.a,$(suffix $file)),-l$(file),$(file)))
diff --git a/core/dex_preopt.mk b/core/dex_preopt.mk
index 8b555e0..e0dde01 100644
--- a/core/dex_preopt.mk
+++ b/core/dex_preopt.mk
@@ -35,7 +35,7 @@
 _dbj_jar_no_dex := $(DEXPREOPT_BOOT_JAR_DIR_FULL_PATH)/$(1)_nodex.jar
 _dbj_src_jar := $(call intermediates-dir-for,JAVA_LIBRARIES,$(1),,COMMON)/javalib.jar
 
-$$(_dbj_jar_no_dex) : $$(_dbj_src_jar) | $(ACP) $(AAPT)
+$$(_dbj_jar_no_dex) : $$(_dbj_src_jar) | $(ACP)
 	$$(call copy-file-to-target)
 ifneq ($(DEX_PREOPT_DEFAULT),nostripping)
 	$$(call dexpreopt-remove-classes.dex,$$@)
diff --git a/core/dex_preopt_libart.mk b/core/dex_preopt_libart.mk
index 1de72b7..1bd0bd7 100644
--- a/core/dex_preopt_libart.mk
+++ b/core/dex_preopt_libart.mk
@@ -3,8 +3,13 @@
 #
 ####################################
 
+# Default to debug version to help find bugs.
+# Set USE_DEX2OAT_DEBUG to false for only building non-debug versions.
+ifeq ($(USE_DEX2OAT_DEBUG),false)
 DEX2OAT := $(HOST_OUT_EXECUTABLES)/dex2oat$(HOST_EXECUTABLE_SUFFIX)
-DEX2OATD := $(HOST_OUT_EXECUTABLES)/dex2oatd$(HOST_EXECUTABLE_SUFFIX)
+else
+DEX2OAT := $(HOST_OUT_EXECUTABLES)/dex2oatd$(HOST_EXECUTABLE_SUFFIX)
+endif
 
 # By default, do not run rerun dex2oat if the tool changes.
 # Comment out the | to force dex2oat to rerun on after all changes.
@@ -13,9 +18,6 @@
 DEX2OAT_DEPENDENCY += |
 DEX2OAT_DEPENDENCY += $(DEX2OAT)
 
-DEX2OATD_DEPENDENCY := $(DEX2OAT_DEPENDENCY)
-DEX2OATD_DEPENDENCY += $(DEX2OATD)
-
 # Use the first preloaded-classes file in PRODUCT_COPY_FILES.
 PRELOADED_CLASSES := $(call word-colon,1,$(firstword \
     $(filter %system/etc/preloaded-classes,$(PRODUCT_COPY_FILES))))
@@ -24,13 +26,6 @@
 COMPILED_CLASSES := $(call word-colon,1,$(firstword \
     $(filter %system/etc/compiled-classes,$(PRODUCT_COPY_FILES))))
 
-# Default to debug version to help find bugs.
-# Set USE_DEX2OAT_DEBUG to false for only building non-debug versions.
-ifneq ($(USE_DEX2OAT_DEBUG), false)
-DEX2OAT = $(DEX2OATD)
-DEX2OAT_DEPENDENCY = $(DEX2OATD_DEPENDENCY)
-endif
-
 # start of image reserved address space
 LIBART_IMG_HOST_BASE_ADDRESS   := 0x60000000
 LIBART_IMG_TARGET_BASE_ADDRESS := 0x70000000
diff --git a/core/droiddoc.mk b/core/droiddoc.mk
index 41f135c..1e9de1c 100644
--- a/core/droiddoc.mk
+++ b/core/droiddoc.mk
@@ -23,6 +23,7 @@
 LOCAL_IS_HOST_MODULE := $(call true-or-empty,$(LOCAL_IS_HOST_MODULE))
 ifeq ($(LOCAL_IS_HOST_MODULE),true)
 my_prefix := HOST_
+LOCAL_HOST_PREFIX :=
 else
 my_prefix := TARGET_
 endif
@@ -107,7 +108,7 @@
 define prepare-doc-source-list
 $(hide) mkdir -p $(dir $(1))
 $(call dump-words-to-file, $(2), $(1))
-$(hide) for d in $(3) ; do find $$d -name '*.java' >> $(1) 2> /dev/null ; done ; true
+$(hide) for d in $(3) ; do find $$d -name '*.java' -and -not -name '.*' >> $(1) 2> /dev/null ; done ; true
 endef
 
 ifeq (a,b)
@@ -124,15 +125,15 @@
 ##
 
 droiddoc_templates := \
-    $(shell find $(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR) -type f)
+    $(sort $(shell find $(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR) -type f))
 
 droiddoc := \
 	$(HOST_JDK_TOOLS_JAR) \
 	$(HOST_OUT_JAVA_LIBRARIES)/doclava$(COMMON_JAVA_PACKAGE_SUFFIX)
 
 $(full_target): PRIVATE_DOCLETPATH := $(HOST_OUT_JAVA_LIBRARIES)/jsilver$(COMMON_JAVA_PACKAGE_SUFFIX):$(HOST_OUT_JAVA_LIBRARIES)/doclava$(COMMON_JAVA_PACKAGE_SUFFIX)
-$(full_target): PRIVATE_CURRENT_BUILD := -hdf page.build $(BUILD_ID)-$(BUILD_NUMBER)
-$(full_target): PRIVATE_CURRENT_TIME :=  -hdf page.now "$(shell date "+%d %b %Y %k:%M")"
+$(full_target): PRIVATE_CURRENT_BUILD := -hdf page.build $(BUILD_ID)-$(BUILD_NUMBER_FROM_FILE)
+$(full_target): PRIVATE_CURRENT_TIME :=  -hdf page.now "$$($(DATE_FROM_FILE) "+%d %b %Y %k:%M")"
 $(full_target): PRIVATE_CUSTOM_TEMPLATE_DIR := $(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR)
 $(full_target): PRIVATE_IN_CUSTOM_ASSET_DIR := $(LOCAL_DROIDDOC_CUSTOM_TEMPLATE_DIR)/$(LOCAL_DROIDDOC_CUSTOM_ASSET_DIR)
 $(full_target): PRIVATE_OUT_ASSET_DIR := $(out_dir)/$(LOCAL_DROIDDOC_ASSET_DIR)
@@ -141,7 +142,7 @@
 html_dir_files :=
 ifneq ($(strip $(LOCAL_DROIDDOC_HTML_DIR)),)
 $(full_target): PRIVATE_DROIDDOC_HTML_DIR := -htmldir $(LOCAL_PATH)/$(LOCAL_DROIDDOC_HTML_DIR)
-html_dir_files := $(shell find $(LOCAL_PATH)/$(LOCAL_DROIDDOC_HTML_DIR) -type f)
+html_dir_files := $(sort $(shell find $(LOCAL_PATH)/$(LOCAL_DROIDDOC_HTML_DIR) -type f))
 else
 $(full_target): PRIVATE_DROIDDOC_HTML_DIR :=
 endif
@@ -160,7 +161,7 @@
         $(droiddoc) \
         $(html_dir_files) \
         $(full_java_lib_deps) \
-        $(LOCAL_MODULE_MAKEFILE) \
+        $(LOCAL_MODULE_MAKEFILE_DEP) \
         $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	@echo Docs droiddoc: $(PRIVATE_OUT_DIR)
 	$(hide) mkdir -p $(dir $@)
@@ -170,7 +171,7 @@
 		javadoc \
                 -encoding UTF-8 \
                 \@$(PRIVATE_SRC_LIST_FILE) \
-                -J-Xmx1280m \
+                -J-Xmx1600m \
                 -XDignore.symbol.file \
                 $(PRIVATE_PROFILING_OPTIONS) \
                 -quiet \
@@ -240,7 +241,7 @@
 	@echo Package docs: $@
 	@rm -f $@
 	@mkdir -p $(dir $@)
-	$(hide) ( F=$$(pwd)/$@ ; cd $(PRIVATE_DOCS_DIR) && zip -rq $$F * )
+	$(hide) ( F=$$(pwd)/$@ ; cd $(PRIVATE_DOCS_DIR) && zip -rqX $$F * )
 
 $(LOCAL_MODULE)-docs.zip : $(out_zip)
 
diff --git a/core/dumpvar.mk b/core/dumpvar.mk
index 510bc7d..c7fb8db 100644
--- a/core/dumpvar.mk
+++ b/core/dumpvar.mk
@@ -80,6 +80,7 @@
 $(info   HOST_ARCH=$(HOST_ARCH))
 $(info   HOST_OS=$(HOST_OS))
 $(info   HOST_OS_EXTRA=$(HOST_OS_EXTRA))
+$(info   HOST_CROSS_OS=$(HOST_CROSS_OS))
 $(info   HOST_BUILD_TYPE=$(HOST_BUILD_TYPE))
 $(info   BUILD_ID=$(BUILD_ID))
 $(info   OUT_DIR=$(OUT_DIR))
diff --git a/core/dynamic_binary.mk b/core/dynamic_binary.mk
index 38c0cbe..d6f6cc9 100644
--- a/core/dynamic_binary.mk
+++ b/core/dynamic_binary.mk
@@ -44,7 +44,10 @@
 relocation_packer_input := $(linked_module)
 relocation_packer_output := $(intermediates)/PACKED/$(my_built_module_stem)
 
-my_pack_module_relocations := $(LOCAL_PACK_MODULE_RELOCATIONS)
+my_pack_module_relocations := false
+ifneq ($(DISABLE_RELOCATION_PACKER),true)
+    my_pack_module_relocations := $(LOCAL_PACK_MODULE_RELOCATIONS)
+endif
 
 ifeq ($(my_pack_module_relocations),)
   my_pack_module_relocations := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_PACK_MODULE_RELOCATIONS)
@@ -86,6 +89,20 @@
 	@echo "target Symbolic: $(PRIVATE_MODULE) ($@)"
 	$(copy-file-to-target)
 
+###########################################################
+## Store breakpad symbols
+###########################################################
+
+ifeq ($(BREAKPAD_GENERATE_SYMBOLS),true)
+my_breakpad_path := $(TARGET_OUT_BREAKPAD)/$(patsubst $(PRODUCT_OUT)/%,%,$(my_module_path))
+breakpad_input := $(relocation_packer_output)
+breakpad_output := $(my_breakpad_path)/$(my_installed_module_stem).sym
+$(breakpad_output) : $(breakpad_input) | $(BREAKPAD_DUMP_SYMS)
+	@echo "target breakpad: $(PRIVATE_MODULE) ($@)"
+	@mkdir -p $(dir $@)
+	$(hide) $(BREAKPAD_DUMP_SYMS) -c $< > $@
+$(LOCAL_BUILT_MODULE) : $(breakpad_output)
+endif
 
 ###########################################################
 ## Strip
@@ -143,5 +160,6 @@
 
 $(cleantarget): PRIVATE_CLEAN_FILES += \
     $(linked_module) \
+    $(breakpad_output) \
     $(symbolic_output) \
     $(strip_output)
diff --git a/core/envsetup.mk b/core/envsetup.mk
index bf04455..050d445 100644
--- a/core/envsetup.mk
+++ b/core/envsetup.mk
@@ -27,7 +27,7 @@
 # NOTE: This will be overridden in product_config.mk if make
 # was invoked with a PRODUCT-xxx-yyy goal.
 ifeq ($(TARGET_PRODUCT),)
-TARGET_PRODUCT := full
+TARGET_PRODUCT := aosp_arm
 endif
 
 
@@ -53,19 +53,15 @@
 ifneq (,$(findstring Macintosh,$(UNAME)))
   HOST_OS := darwin
 endif
-ifneq (,$(findstring CYGWIN,$(UNAME)))
-  HOST_OS := windows
-endif
 
 # BUILD_OS is the real host doing the build.
 BUILD_OS := $(HOST_OS)
 
-# Under Linux, if USE_MINGW is set, we change HOST_OS to Windows to build the
-# Windows SDK. Only a subset of tools and SDK will manage to build properly.
+HOST_CROSS_OS :=
+# We can cross-build Windows binaries on Linux
 ifeq ($(HOST_OS),linux)
-ifdef USE_MINGW
-  HOST_OS := windows
-endif
+HOST_CROSS_OS := windows
+HOST_CROSS_ARCH := x86
 endif
 
 ifeq ($(HOST_OS),)
@@ -105,11 +101,7 @@
 HOST_PREBUILT_ARCH := x86
 # This is the standard way to name a directory containing prebuilt host
 # objects. E.g., prebuilt/$(HOST_PREBUILT_TAG)/cc
-ifeq ($(HOST_OS),windows)
-  HOST_PREBUILT_TAG := windows
-else
-  HOST_PREBUILT_TAG := $(HOST_OS)-$(HOST_PREBUILT_ARCH)
-endif
+HOST_PREBUILT_TAG := $(BUILD_OS)-$(HOST_PREBUILT_ARCH)
 
 # TARGET_COPY_OUT_* are all relative to the staging directory, ie PRODUCT_OUT.
 # Define them here so they can be used in product config files.
@@ -140,15 +132,6 @@
 $(error must be empty or one of: eng user userdebug)
 endif
 
-# Build host as 32-bit for SDK build.
-ifneq ($(filter $(MAKECMDGOALS),win_sdk sdk),)
-HOST_PREFER_32_BIT := true
-endif
-ifdef USE_MINGW
-# We only build sdk host tools in the MinGW windows build.
-# Build it as 32-bit as well.
-HOST_PREFER_32_BIT := true
-endif
 SDK_HOST_ARCH := x86
 
 # Boards may be defined under $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)
@@ -156,11 +139,11 @@
 # make sure only one exists.
 # Real boards should always be associated with an OEM vendor.
 board_config_mk := \
-	$(strip $(wildcard \
+	$(strip $(sort $(wildcard \
 		$(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
-		$(shell test -d device && find device -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
-		$(shell test -d vendor && find vendor -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
-	))
+		$(shell test -d device && find -L device -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
+		$(shell test -d vendor && find -L vendor -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
+	)))
 ifeq ($(board_config_mk),)
   $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
 endif
@@ -229,8 +212,12 @@
 HOST_OUT_release := $(HOST_OUT_ROOT_release)/$(HOST_OS)-$(HOST_PREBUILT_ARCH)
 HOST_OUT_debug := $(HOST_OUT_ROOT_debug)/$(HOST_OS)-$(HOST_PREBUILT_ARCH)
 HOST_OUT := $(HOST_OUT_$(HOST_BUILD_TYPE))
+# TODO: remove
+BUILD_OUT := $(HOST_OUT)
 
-BUILD_OUT := $(OUT_DIR)/host/$(BUILD_OS)-$(HOST_PREBUILT_ARCH)
+HOST_CROSS_OUT_release := $(HOST_OUT_ROOT_release)/windows-$(HOST_PREBUILT_ARCH)
+HOST_CROSS_OUT_debug := $(HOST_OUT_ROOT_debug)/windows-$(HOST_PREBUILT_ARCH)
+HOST_CROSS_OUT := $(HOST_CROSS_OUT_$(HOST_BUILD_TYPE))
 
 TARGET_PRODUCT_OUT_ROOT := $(TARGET_OUT_ROOT)/product
 
@@ -248,6 +235,9 @@
 HOST_OUT_JAVA_LIBRARIES := $(HOST_OUT)/framework
 HOST_OUT_SDK_ADDON := $(HOST_OUT)/sdk_addon
 
+HOST_CROSS_OUT_EXECUTABLES := $(HOST_CROSS_OUT)/bin
+HOST_CROSS_OUT_SHARED_LIBRARIES := $(HOST_CROSS_OUT)/lib
+
 HOST_OUT_INTERMEDIATES := $(HOST_OUT)/obj
 HOST_OUT_HEADERS := $(HOST_OUT_INTERMEDIATES)/include
 HOST_OUT_INTERMEDIATE_LIBRARIES := $(HOST_OUT_INTERMEDIATES)/lib
@@ -255,9 +245,16 @@
 HOST_OUT_COMMON_INTERMEDIATES := $(HOST_COMMON_OUT_ROOT)/obj
 HOST_OUT_FAKE := $(HOST_OUT)/fake_packages
 
+HOST_CROSS_OUT_INTERMEDIATES := $(HOST_CROSS_OUT)/obj
+HOST_CROSS_OUT_HEADERS := $(HOST_CROSS_OUT_INTERMEDIATES)/include
+HOST_CROSS_OUT_INTERMEDIATE_LIBRARIES := $(HOST_CROSS_OUT_INTERMEDIATES)/lib
+HOST_CROSS_OUT_NOTICE_FILES := $(HOST_CROSS_OUT_INTERMEDIATES)/NOTICE_FILES
+
 HOST_OUT_GEN := $(HOST_OUT)/gen
 HOST_OUT_COMMON_GEN := $(HOST_COMMON_OUT_ROOT)/gen
 
+HOST_CROSS_OUT_GEN := $(HOST_CROSS_OUT)/gen
+
 # Out for HOST_2ND_ARCH
 HOST_2ND_ARCH_VAR_PREFIX := 2ND_
 HOST_2ND_ARCH_MODULE_SUFFIX := _32
@@ -265,6 +262,7 @@
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATE_LIBRARIES := $($(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATES)/lib
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_SHARED_LIBRARIES := $(HOST_OUT)/lib
 $(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_EXECUTABLES := $(HOST_OUT_EXECUTABLES)
+$(HOST_2ND_ARCH_VAR_PREFIX)HOST_OUT_JAVA_LIBRARIES := $(HOST_OUT_JAVA_LIBRARIES)
 
 # The default host library path.
 # It always points to the path where we build libraries in the default bitness.
@@ -283,14 +281,20 @@
 TARGET_OUT_COMMON_GEN := $(TARGET_COMMON_OUT_ROOT)/gen
 
 TARGET_OUT := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_SYSTEM)
+ifneq ($(filter address,$(SANITIZE_TARGET)),)
+target_out_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_DATA)
+else
+target_out_shared_libraries_base := $(TARGET_OUT)
+endif
+
 TARGET_OUT_EXECUTABLES := $(TARGET_OUT)/bin
 TARGET_OUT_OPTIONAL_EXECUTABLES := $(TARGET_OUT)/xbin
 ifeq ($(TARGET_IS_64_BIT),true)
 # /system/lib always contains 32-bit libraries,
 # and /system/lib64 (if present) always contains 64-bit libraries.
-TARGET_OUT_SHARED_LIBRARIES := $(TARGET_OUT)/lib64
+TARGET_OUT_SHARED_LIBRARIES := $(target_out_shared_libraries_base)/lib64
 else
-TARGET_OUT_SHARED_LIBRARIES := $(TARGET_OUT)/lib
+TARGET_OUT_SHARED_LIBRARIES := $(target_out_shared_libraries_base)/lib
 endif
 TARGET_OUT_JAVA_LIBRARIES := $(TARGET_OUT)/framework
 TARGET_OUT_APPS := $(TARGET_OUT)/app
@@ -306,7 +310,7 @@
 TARGET_2ND_ARCH_MODULE_SUFFIX := $(HOST_2ND_ARCH_MODULE_SUFFIX)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES := $(PRODUCT_OUT)/obj_$(TARGET_2ND_ARCH)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATE_LIBRARIES := $($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_INTERMEDIATES)/lib
-$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_SHARED_LIBRARIES := $(TARGET_OUT)/lib
+$(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_SHARED_LIBRARIES := $(target_out_shared_libraries_base)/lib
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_EXECUTABLES := $(TARGET_OUT_EXECUTABLES)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_APPS := $(TARGET_OUT_APPS)
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_APPS_PRIVILEGED := $(TARGET_OUT_APPS_PRIVILEGED)
@@ -334,12 +338,18 @@
 TARGET_OUT_CACHE := $(PRODUCT_OUT)/cache
 
 TARGET_OUT_VENDOR := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_VENDOR)
+ifneq ($(filter address,$(SANITIZE_TARGET)),)
+target_out_vendor_shared_libraries_base := $(PRODUCT_OUT)/$(TARGET_COPY_OUT_DATA)/vendor
+else
+target_out_vendor_shared_libraries_base := $(TARGET_OUT_VENDOR)
+endif
+
 TARGET_OUT_VENDOR_EXECUTABLES := $(TARGET_OUT_VENDOR)/bin
 TARGET_OUT_VENDOR_OPTIONAL_EXECUTABLES := $(TARGET_OUT_VENDOR)/xbin
 ifeq ($(TARGET_IS_64_BIT),true)
-TARGET_OUT_VENDOR_SHARED_LIBRARIES := $(TARGET_OUT_VENDOR)/lib64
+TARGET_OUT_VENDOR_SHARED_LIBRARIES := $(target_out_vendor_shared_libraries_base)/lib64
 else
-TARGET_OUT_VENDOR_SHARED_LIBRARIES := $(TARGET_OUT_VENDOR)/lib
+TARGET_OUT_VENDOR_SHARED_LIBRARIES := $(target_out_vendor_shared_libraries_base)/lib
 endif
 TARGET_OUT_VENDOR_JAVA_LIBRARIES := $(TARGET_OUT_VENDOR)/framework
 TARGET_OUT_VENDOR_APPS := $(TARGET_OUT_VENDOR)/app
@@ -379,6 +389,8 @@
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_SHARED_LIBRARIES := $(TARGET_OUT_ODM)/lib
 $(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_ODM_APPS := $(TARGET_OUT_ODM_APPS)
 
+TARGET_OUT_BREAKPAD := $(PRODUCT_OUT)/breakpad
+
 TARGET_OUT_UNSTRIPPED := $(PRODUCT_OUT)/symbols
 TARGET_OUT_EXECUTABLES_UNSTRIPPED := $(TARGET_OUT_UNSTRIPPED)/system/bin
 TARGET_OUT_SHARED_LIBRARIES_UNSTRIPPED := $(TARGET_OUT_UNSTRIPPED)/system/lib
diff --git a/core/executable.mk b/core/executable.mk
index 4dd9a23..70ef0d9 100644
--- a/core/executable.mk
+++ b/core/executable.mk
@@ -6,6 +6,17 @@
 # LOCAL_MODULE_PATH_32 and LOCAL_MODULE_PATH_64 or LOCAL_MODULE_STEM_32 and
 # LOCAL_MODULE_STEM_64
 
+my_skip_this_target :=
+ifneq ($(filter address,$(SANITIZE_TARGET)),)
+  ifeq (true,$(LOCAL_FORCE_STATIC_EXECUTABLE))
+    my_skip_this_target := true
+  else ifeq (false, $(LOCAL_CLANG))
+    my_skip_this_target := true
+  endif
+endif
+
+ifneq (true,$(my_skip_this_target))
+
 my_prefix := TARGET_
 include $(BUILD_SYSTEM)/multilib.mk
 
@@ -71,3 +82,5 @@
 LOCAL_NO_2ND_ARCH_MODULE_SUFFIX :=
 
 my_module_arch_supported :=
+
+endif
diff --git a/core/executable_internal.mk b/core/executable_internal.mk
index cdaf293..2105f58 100644
--- a/core/executable_internal.mk
+++ b/core/executable_internal.mk
@@ -35,17 +35,21 @@
 
 # Define PRIVATE_ variables from global vars
 my_target_global_ld_dirs := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_LD_DIRS)
-my_target_libprofile_rt := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBPROFILE_RT)
-my_target_libgcov := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBGCOV)
 ifeq ($(LOCAL_NO_LIBGCC),true)
 my_target_libgcc :=
 else
 my_target_libgcc := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBGCC)
 endif
 my_target_libatomic := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBATOMIC)
+ifeq ($(LOCAL_NO_CRT),true)
+my_target_crtbegin_dynamic_o :=
+my_target_crtbegin_static_o :=
+my_target_crtend_o :=
+else
 my_target_crtbegin_dynamic_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_CRTBEGIN_DYNAMIC_O)
 my_target_crtbegin_static_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_CRTBEGIN_STATIC_O)
 my_target_crtend_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_CRTEND_O)
+endif
 ifdef LOCAL_SDK_VERSION
 # Make sure the prebuilt NDK paths are put ahead of the TARGET_GLOBAL_LD_DIRS,
 # so we don't have race condition when the system libraries (such as libc, libstdc++) are also built in the tree.
@@ -60,8 +64,6 @@
 endif
 $(linked_module): PRIVATE_TARGET_GLOBAL_LD_DIRS := $(my_target_global_ld_dirs)
 $(linked_module): PRIVATE_TARGET_GLOBAL_LDFLAGS := $(my_target_global_ldflags)
-$(linked_module): PRIVATE_TARGET_LIBPROFILE_RT := $(my_target_libprofile_rt)
-$(linked_module): PRIVATE_TARGET_LIBGCOV := $(my_target_libgcov)
 $(linked_module): PRIVATE_TARGET_LIBGCC := $(my_target_libgcc)
 $(linked_module): PRIVATE_TARGET_LIBATOMIC := $(my_target_libatomic)
 $(linked_module): PRIVATE_TARGET_CRTBEGIN_DYNAMIC_O := $(my_target_crtbegin_dynamic_o)
diff --git a/core/executable_prefer_symlink.mk b/core/executable_prefer_symlink.mk
index fc97ad3..931550f 100644
--- a/core/executable_prefer_symlink.mk
+++ b/core/executable_prefer_symlink.mk
@@ -42,7 +42,7 @@
 # $(my_symlink) doesn't need to depend on $(PRIVATE_SRC_BINARY_NAME): we can generate symlink to nonexistent file.
 # If you add the dependency, make would compare the timestamp of a file against that of its symlink:
 # they are always equal, because make follows symlink.
-$(my_symlink): $(LOCAL_MODULE_MAKEFILE)
+$(my_symlink): $(LOCAL_MODULE_MAKEFILE_DEP)
 	@echo "Symlink: $@ -> $(PRIVATE_SRC_BINARY_NAME)"
 	@mkdir -p $(dir $@)
 	@rm -rf $@
diff --git a/core/find-jdk-tools-jar.sh b/core/find-jdk-tools-jar.sh
index 0224829..ac0b3b6 100755
--- a/core/find-jdk-tools-jar.sh
+++ b/core/find-jdk-tools-jar.sh
@@ -16,5 +16,5 @@
         LSLINE=$(ls -l "$JAVAC")
         JAVAC=$(echo -n "$LSLINE" | sed -e "s/.* -> //")
     done
-    echo $JAVAC | sed -e "s:\(.*\)/bin/javac.*:\\1/lib/tools.jar:"
+    echo $JAVAC | sed -e 's:\(.*\)/javac$:\1/../lib/tools.jar:'
 fi
diff --git a/core/fuzz_test.mk b/core/fuzz_test.mk
new file mode 100644
index 0000000..fc582b3
--- /dev/null
+++ b/core/fuzz_test.mk
@@ -0,0 +1,34 @@
+###########################################
+## A thin wrapper around BUILD_EXECUTABLE
+## Common flags for fuzz tests are added.
+###########################################
+
+ifdef LOCAL_SDK_VERSION
+    $(error $(LOCAL_PATH): $(LOCAL_MODULE): NDK fuzz tests are not supported.)
+endif
+
+LOCAL_CFLAGS += -fsanitize-coverage=edge,indirect-calls,8bit-counters,trace-cmp
+LOCAL_STATIC_LIBRARIES += libLLVMFuzzer
+
+ifdef LOCAL_MODULE_PATH
+$(error $(LOCAL_PATH): Do not set LOCAL_MODULE_PATH when building test $(LOCAL_MODULE))
+endif
+
+ifdef LOCAL_MODULE_PATH_32
+$(error $(LOCAL_PATH): Do not set LOCAL_MODULE_PATH_32 when building test $(LOCAL_MODULE))
+endif
+
+ifdef LOCAL_MODULE_PATH_64
+$(error $(LOCAL_PATH): Do not set LOCAL_MODULE_PATH_64 when building test $(LOCAL_MODULE))
+endif
+
+LOCAL_MODULE_PATH_64 := $(TARGET_OUT_DATA_NATIVE_TESTS)/$(LOCAL_MODULE)
+LOCAL_MODULE_PATH_32 := $($(TARGET_2ND_ARCH_VAR_PREFIX)TARGET_OUT_DATA_NATIVE_TESTS)/$(LOCAL_MODULE)
+
+ifndef LOCAL_MULTILIB
+ifndef LOCAL_32_BIT_ONLY
+LOCAL_MULTILIB := both
+endif
+endif
+
+include $(BUILD_EXECUTABLE)
diff --git a/core/goma.mk b/core/goma.mk
new file mode 100644
index 0000000..01a1d81
--- /dev/null
+++ b/core/goma.mk
@@ -0,0 +1,67 @@
+#
+# Copyright (C) 2015 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# Notice: this works only with Google's Goma build infrastructure.
+ifneq ($(USE_GOMA),)
+  # Check if USE_NINJA is not false because GNU make won't work well
+  # with goma. Note this file is evaluated twice, once by GNU make and
+  # once by kati with USE_NINJA=false. We do this check in the former
+  # pass.
+  ifndef KATI
+    ifeq ($(USE_NINJA),false)
+      $(error USE_GOMA=true is not compatible with USE_NINJA=false)
+    endif
+  endif
+
+  # Goma requires a lot of processes and file descriptors.
+  ifeq ($(shell echo $$(($$(ulimit -u) < 2500 || $$(ulimit -n) < 16000))),1)
+    $(warning Max user processes and/or open files are insufficient)
+    ifeq ($(shell uname),Darwin)
+      $(error See go/ma/how-to-use-goma/how-to-use-goma-for-android to relax the limit)
+    else
+      $(error Adjust the limit by ulimit -u and ulimit -n)
+    endif
+  endif
+
+  ifdef GOMA_DIR
+    goma_dir := $(GOMA_DIR)
+  else
+    goma_dir := $(HOME)/goma
+  endif
+  goma_ctl := $(goma_dir)/goma_ctl.py
+  GOMA_CC := $(goma_dir)/gomacc
+
+  $(if $(wildcard $(goma_ctl)),, \
+   $(warning You should have goma in $$GOMA_DIR or $(HOME)/goma) \
+   $(error See go/ma/how-to-use-goma/how-to-use-goma-for-android for detail))
+
+  # Append gomacc to existing *_WRAPPER variables so it's possible to
+  # use both ccache and gomacc.
+  CC_WRAPPER := $(strip $(CC_WRAPPER) $(GOMA_CC))
+  CXX_WRAPPER := $(strip $(CXX_WRAPPER) $(GOMA_CC))
+
+  # gomacc can start goma client's daemon process automatically, but
+  # it is safer and faster to start up it beforehand. We run this as a
+  # background process so this won't slow down the build.
+  # We use "ensure_start" command when the compiler_proxy is already
+  # running and uses GOMA_HERMETIC=error flag. The compiler_proxy will
+  # restart otherwise.
+  # TODO(hamaji): Remove this condition after http://b/25676777 is fixed.
+  $(shell ( if ( curl http://localhost:$$($(GOMA_CC) port)/flagz | grep GOMA_HERMETIC=error ); then cmd=ensure_start; else cmd=restart; fi; GOMA_HERMETIC=error $(goma_ctl) $${cmd} ) &> /dev/null &)
+
+  goma_ctl :=
+  goma_dir :=
+endif
diff --git a/core/host_dalvik_java_library.mk b/core/host_dalvik_java_library.mk
index 4814d70..59ecf4e 100644
--- a/core/host_dalvik_java_library.mk
+++ b/core/host_dalvik_java_library.mk
@@ -45,30 +45,27 @@
     $(built_dex)
 
 # See comment in java.mk
-java_alternative_checked_module := $(full_classes_compiled_jar)
+ifndef LOCAL_CHECKED_MODULE
+LOCAL_CHECKED_MODULE := $(full_classes_compiled_jar)
+endif
 
 #######################################
 include $(BUILD_SYSTEM)/base_rules.mk
 #######################################
+java_sources := $(addprefix $(LOCAL_PATH)/, $(filter %.java,$(LOCAL_SRC_FILES))) \
+                $(filter %.java,$(LOCAL_GENERATED_SOURCES))
+all_java_sources := $(java_sources)
 
-$(full_classes_compiled_jar): PRIVATE_JAVAC_DEBUG_FLAGS := -g
-
-java_alternative_checked_module :=
+include $(BUILD_SYSTEM)/java_common.mk
 
 # The layers file allows you to enforce a layering between java packages.
 # Run build/tools/java-layers.py for more details.
 layers_file := $(addprefix $(LOCAL_PATH)/, $(LOCAL_JAVA_LAYERS_FILE))
 
-$(LOCAL_INTERMEDIATE_TARGETS): \
-	PRIVATE_CLASS_INTERMEDIATES_DIR := $(intermediates.COMMON)/classes
-$(LOCAL_INTERMEDIATE_TARGETS): \
-	PRIVATE_SOURCE_INTERMEDIATES_DIR := $(LOCAL_INTERMEDIATE_SOURCE_DIR)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RMTYPEDEFS :=
-
 $(cleantarget): PRIVATE_CLEAN_FILES += $(intermediates.COMMON)
 
 $(full_classes_compiled_jar): PRIVATE_JAVA_LAYERS_FILE := $(layers_file)
-$(full_classes_compiled_jar): PRIVATE_JAVACFLAGS := $(LOCAL_JAVACFLAGS)
+$(full_classes_compiled_jar): PRIVATE_JAVACFLAGS := $(GLOBAL_JAVAC_DEBUG_FLAGS) $(LOCAL_JAVACFLAGS)
 $(full_classes_compiled_jar): PRIVATE_JAR_EXCLUDE_FILES :=
 $(full_classes_compiled_jar): PRIVATE_JAR_PACKAGES :=
 $(full_classes_compiled_jar): PRIVATE_JAR_EXCLUDE_PACKAGES :=
@@ -78,7 +75,7 @@
         $(full_java_lib_deps) \
         $(jar_manifest_file) \
         $(proto_java_sources_file_stamp) \
-        $(LOCAL_MODULE_MAKEFILE) \
+        $(LOCAL_MODULE_MAKEFILE_DEP) \
         $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-host-java-to-package)
 
@@ -123,13 +120,13 @@
 $(LOCAL_INTERMEDIATE_TARGETS): \
 	PRIVATE_JACK_INCREMENTAL_DIR :=
 endif
-$(LOCAL_INTERMEDIATE_TARGETS):  PRIVATE_JACK_DEBUG_FLAGS := -g
 
 $(built_dex): PRIVATE_CLASSES_JACK := $(full_classes_jack)
-$(built_dex): PRIVATE_JACK_FLAGS := $(LOCAL_JACK_FLAGS)
+$(built_dex): PRIVATE_JACK_FLAGS := $(GLOBAL_JAVAC_DEBUG_FLAGS) $(LOCAL_JACK_FLAGS)
+$(built_dex): PRIVATE_JACK_VERSION := $(LOCAL_JACK_VERSION)
 $(built_dex): $(java_sources) $(java_resource_sources) $(full_jack_lib_deps) \
-        $(jar_manifest_file) $(proto_java_sources_file_stamp) $(LOCAL_MODULE_MAKEFILE) \
-        $(LOCAL_MODULE_MAKEFILE) $(LOCAL_ADDITIONAL_DEPENDENCIES) $(JACK_JAR) $(JACK_LAUNCHER_JAR)
+        $(jar_manifest_file) $(proto_java_sources_file_stamp) $(LOCAL_MODULE_MAKEFILE_DEP) \
+        $(LOCAL_ADDITIONAL_DEPENDENCIES) $(JACK)
 	@echo Building with Jack: $@
 	$(jack-java-to-dex)
 
diff --git a/core/host_dalvik_static_java_library.mk b/core/host_dalvik_static_java_library.mk
index 90bcc12..6248e1a 100644
--- a/core/host_dalvik_static_java_library.mk
+++ b/core/host_dalvik_static_java_library.mk
@@ -34,7 +34,8 @@
 include $(BUILD_SYSTEM)/host_java_library.mk
 # proguard is not supported
 # *.proto files are not supported
-$(full_classes_jack): PRIVATE_JACK_FLAGS := $(LOCAL_JACK_FLAGS)
+$(full_classes_jack): PRIVATE_JACK_FLAGS := $(GLOBAL_JAVAC_DEBUG_FLAGS) $(LOCAL_JACK_FLAGS)
+$(full_classes_jack): PRIVATE_JACK_VERSION := $(LOCAL_JACK_VERSION)
 $(full_classes_jack): PRIVATE_JARJAR_RULES := $(LOCAL_JARJAR_RULES)
 $(full_classes_jack): \
 	PRIVATE_JACK_INTERMEDIATES_DIR := $(intermediates.COMMON)/jack-rsc
@@ -46,9 +47,9 @@
 	PRIVATE_JACK_INCREMENTAL_DIR :=
 endif
 $(full_classes_jack): $(java_sources) $(java_resource_sources) $(full_jack_lib_deps) \
-        $(jar_manifest_file) $(layers_file) $(LOCAL_MODULE_MAKEFILE) \
+        $(jar_manifest_file) $(layers_file) $(LOCAL_MODULE_MAKEFILE_DEP) \
         $(LOCAL_ADDITIONAL_DEPENDENCIES) $(LOCAL_JARJAR_RULES) \
-        $(JACK_JAR) $(JACK_LAUNCHER_JAR)
+        $(JACK)
 	@echo Building with Jack: $@
 	$(java-to-jack)
 
diff --git a/core/host_executable.mk b/core/host_executable.mk
index 0091f3f..bc55ef9 100644
--- a/core/host_executable.mk
+++ b/core/host_executable.mk
@@ -1,5 +1,6 @@
-
+LOCAL_IS_HOST_MODULE := true
 my_prefix := HOST_
+LOCAL_HOST_PREFIX :=
 include $(BUILD_SYSTEM)/multilib.mk
 
 ifndef LOCAL_MODULE_HOST_ARCH
@@ -50,5 +51,30 @@
 LOCAL_2ND_ARCH_VAR_PREFIX :=
 endif  # HOST_2ND_ARCH
 
+ifdef HOST_CROSS_OS
+my_prefix := HOST_CROSS_
+LOCAL_HOST_PREFIX := $(my_prefix)
+include $(BUILD_SYSTEM)/module_arch_supported.mk
+ifeq ($(my_module_arch_supported),true)
+# Build for Windows
+OVERRIDE_BUILT_MODULE_PATH :=
+# we don't want others using the cross compiled version
+saved_LOCAL_BUILT_MODULE := $(LOCAL_BUILT_MODULE)
+saved_LOCAL_INSTALLED_MODULE := $(LOCAL_INSTALLED_MODULE)
+LOCAL_BUILT_MODULE :=
+LOCAL_INSTALLED_MODULE :=
+LOCAL_INTERMEDIATE_TARGETS :=
+
+ifeq ($(LOCAL_NO_FPIE),)
+LOCAL_LDFLAGS += $(HOST_CROSS_FPIE_FLAGS)
+endif
+
+include $(BUILD_SYSTEM)/host_executable_internal.mk
+LOCAL_BUILT_MODULE := $(saved_LOCAL_BUILT_MODULE)
+LOCAL_INSTALLED_MODULE := $(saved_LOCAL_INSTALLED_MODULE)
+endif
+LOCAL_HOST_PREFIX :=
+endif
+
 LOCAL_NO_2ND_ARCH_MODULE_SUFFIX :=
 my_module_arch_supported :=
diff --git a/core/host_executable_internal.mk b/core/host_executable_internal.mk
index 0c0ac3d..b682ffd 100644
--- a/core/host_executable_internal.mk
+++ b/core/host_executable_internal.mk
@@ -5,12 +5,11 @@
 ## None.
 ###########################################################
 
-LOCAL_IS_HOST_MODULE := true
 ifeq ($(strip $(LOCAL_MODULE_CLASS)),)
 LOCAL_MODULE_CLASS := EXECUTABLES
 endif
 ifeq ($(strip $(LOCAL_MODULE_SUFFIX)),)
-LOCAL_MODULE_SUFFIX := $(HOST_EXECUTABLE_SUFFIX)
+LOCAL_MODULE_SUFFIX := $($(my_prefix)EXECUTABLE_SUFFIX)
 endif
 
 $(call host-executable-hook)
@@ -27,7 +26,7 @@
 
 include $(BUILD_SYSTEM)/binary.mk
 
-my_host_libprofile_rt := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_LIBPROFILE_RT)
+my_host_libprofile_rt := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)LIBPROFILE_RT)
 $(LOCAL_BUILT_MODULE): PRIVATE_HOST_LIBPROFILE_RT := $(my_host_libprofile_rt)
 
 $(LOCAL_BUILT_MODULE): $(all_objects) $(all_libraries)
diff --git a/core/host_fuzz_test.mk b/core/host_fuzz_test.mk
new file mode 100644
index 0000000..cc7baad
--- /dev/null
+++ b/core/host_fuzz_test.mk
@@ -0,0 +1,9 @@
+################################################
+## A thin wrapper around BUILD_HOST_EXECUTABLE
+## Common flags for host fuzz tests are added.
+################################################
+
+LOCAL_CFLAGS += -fsanitize-coverage=edge,indirect-calls,8bit-counters,trace-cmp
+LOCAL_STATIC_LIBRARIES += libLLVMFuzzer
+
+include $(BUILD_HOST_EXECUTABLE)
diff --git a/core/host_java_library.mk b/core/host_java_library.mk
index 47189d7..052c571 100644
--- a/core/host_java_library.mk
+++ b/core/host_java_library.mk
@@ -43,7 +43,11 @@
 include $(BUILD_SYSTEM)/base_rules.mk
 #######################################
 
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RMTYPEDEFS :=
+java_sources := $(addprefix $(LOCAL_PATH)/, $(filter %.java,$(LOCAL_SRC_FILES))) \
+                $(filter %.java,$(LOCAL_GENERATED_SOURCES))
+all_java_sources := $(java_sources)
+
+include $(BUILD_SYSTEM)/java_common.mk
 
 ifeq (true,$(LOCAL_EMMA_INSTRUMENT))
 $(full_classes_emma_jar): PRIVATE_EMMA_COVERAGE_FILE := $(intermediates.COMMON)/coverage.em
@@ -69,14 +73,12 @@
 full_classes_compiled_jar := $(built_javalib_jar)
 endif # LOCAL_EMMA_INSTRUMENT
 
-$(full_classes_compiled_jar): PRIVATE_JAVAC_DEBUG_FLAGS := -g
-
 # The layers file allows you to enforce a layering between java packages.
 # Run build/tools/java-layers.py for more details.
 layers_file := $(addprefix $(LOCAL_PATH)/, $(LOCAL_JAVA_LAYERS_FILE))
 
 $(full_classes_compiled_jar): PRIVATE_JAVA_LAYERS_FILE := $(layers_file)
-$(full_classes_compiled_jar): PRIVATE_JAVACFLAGS := $(LOCAL_JAVACFLAGS)
+$(full_classes_compiled_jar): PRIVATE_JAVACFLAGS := $(GLOBAL_JAVAC_DEBUG_FLAGS) $(LOCAL_JAVACFLAGS)
 $(full_classes_compiled_jar): PRIVATE_JAR_EXCLUDE_FILES :=
 $(full_classes_compiled_jar): PRIVATE_JAR_PACKAGES :=
 $(full_classes_compiled_jar): PRIVATE_JAR_EXCLUDE_PACKAGES :=
@@ -86,6 +88,6 @@
         $(full_java_lib_deps) \
         $(jar_manifest_file) \
         $(proto_java_sources_file_stamp) \
-        $(LOCAL_MODULE_MAKEFILE) \
+        $(LOCAL_MODULE_MAKEFILE_DEP) \
         $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-host-java-to-package)
diff --git a/core/host_shared_library.mk b/core/host_shared_library.mk
index e840780..49000a4 100644
--- a/core/host_shared_library.mk
+++ b/core/host_shared_library.mk
@@ -1,4 +1,6 @@
+LOCAL_IS_HOST_MODULE := true
 my_prefix := HOST_
+LOCAL_HOST_PREFIX :=
 include $(BUILD_SYSTEM)/multilib.mk
 
 ifndef LOCAL_MODULE_HOST_ARCH
@@ -34,6 +36,26 @@
 LOCAL_2ND_ARCH_VAR_PREFIX :=
 endif  # HOST_2ND_ARCH
 
+ifdef HOST_CROSS_OS
+my_prefix := HOST_CROSS_
+LOCAL_HOST_PREFIX := $(my_prefix)
+include $(BUILD_SYSTEM)/module_arch_supported.mk
+ifeq ($(my_module_arch_supported),true)
+# Build for Windows
+OVERRIDE_BUILT_MODULE_PATH :=
+LOCAL_BUILT_MODULE :=
+LOCAL_MODULE_SUFFIX :=
+# We don't want makefiles using the cross-compiled host tool
+saved_LOCAL_INSTALLED_MODULE := $(LOCAL_INSTALLED_MODULE)
+LOCAL_INSTALLED_MODULE :=
+LOCAL_INTERMEDIATE_TARGETS :=
+
+include $(BUILD_SYSTEM)/host_shared_library_internal.mk
+LOCAL_INSTALLED_MODULE := $(saved_LOCAL_INSTALLED_MODULE)
+endif
+LOCAL_HOST_PREFIX :=
+endif
+
 my_module_arch_supported :=
 
 ###########################################################
diff --git a/core/host_shared_library_internal.mk b/core/host_shared_library_internal.mk
index 645098a..272e76f 100644
--- a/core/host_shared_library_internal.mk
+++ b/core/host_shared_library_internal.mk
@@ -7,13 +7,11 @@
 ## LOCAL_MODULE_SUFFIX will be set for you.
 ###########################################################
 
-LOCAL_IS_HOST_MODULE := true
-
 ifeq ($(strip $(LOCAL_MODULE_CLASS)),)
 LOCAL_MODULE_CLASS := SHARED_LIBRARIES
 endif
 ifeq ($(strip $(LOCAL_MODULE_SUFFIX)),)
-LOCAL_MODULE_SUFFIX := $(HOST_SHLIB_SUFFIX)
+LOCAL_MODULE_SUFFIX := $($(my_prefix)SHLIB_SUFFIX)
 endif
 ifneq ($(strip $(OVERRIDE_BUILT_MODULE_PATH)),)
 $(error $(LOCAL_PATH): Illegal use of OVERRIDE_BUILT_MODULE_PATH)
@@ -36,17 +34,17 @@
 
 # Put the built modules of all shared libraries in a common directory
 # to simplify the link line.
-OVERRIDE_BUILT_MODULE_PATH := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_OUT_INTERMEDIATE_LIBRARIES)
+OVERRIDE_BUILT_MODULE_PATH := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)OUT_INTERMEDIATE_LIBRARIES)
 
 include $(BUILD_SYSTEM)/binary.mk
 
-my_host_libprofile_rt := $($(LOCAL_2ND_ARCH_VAR_PREFIX)HOST_LIBPROFILE_RT)
+my_host_libprofile_rt := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)LIBPROFILE_RT)
 $(LOCAL_BUILD_MODULE): PRIVATE_HOST_LIBPROFILE_RT := $(my_host_libprofile_rt)
 
 $(LOCAL_BUILT_MODULE): \
         $(all_objects) \
         $(all_libraries) \
-        $(LOCAL_MODULE_MAKEFILE) \
+        $(LOCAL_MODULE_MAKEFILE_DEP) \
         $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-host-o-to-shared-lib)
 
diff --git a/core/host_static_library.mk b/core/host_static_library.mk
index 52c42ef..aa8c0e3 100644
--- a/core/host_static_library.mk
+++ b/core/host_static_library.mk
@@ -1,4 +1,6 @@
+LOCAL_IS_HOST_MODULE := true
 my_prefix := HOST_
+LOCAL_HOST_PREFIX :=
 include $(BUILD_SYSTEM)/multilib.mk
 
 ifndef LOCAL_MODULE_HOST_ARCH
@@ -34,6 +36,22 @@
 LOCAL_2ND_ARCH_VAR_PREFIX :=
 endif  # HOST_2ND_ARCH
 
+ifdef HOST_CROSS_OS
+my_prefix := HOST_CROSS_
+LOCAL_HOST_PREFIX := $(my_prefix)
+include $(BUILD_SYSTEM)/module_arch_supported.mk
+ifeq ($(my_module_arch_supported),true)
+# Build for Windows
+OVERRIDE_BUILT_MODULE_PATH :=
+LOCAL_BUILT_MODULE :=
+LOCAL_INSTALLED_MODULE :=
+LOCAL_INTERMEDIATE_TARGETS :=
+
+include $(BUILD_SYSTEM)/host_static_library_internal.mk
+endif
+LOCAL_HOST_PREFIX :=
+endif
+
 my_module_arch_supported :=
 
 ###########################################################
diff --git a/core/host_static_library_internal.mk b/core/host_static_library_internal.mk
index a533cf5..3946aa7 100644
--- a/core/host_static_library_internal.mk
+++ b/core/host_static_library_internal.mk
@@ -18,8 +18,6 @@
 endif
 LOCAL_UNINSTALLABLE_MODULE := true
 
-LOCAL_IS_HOST_MODULE := true
-
 include $(BUILD_SYSTEM)/binary.mk
 
 $(LOCAL_BUILT_MODULE): $(built_whole_libraries)
diff --git a/core/host_test_internal.mk b/core/host_test_internal.mk
index e0070c1..7f6aff0 100644
--- a/core/host_test_internal.mk
+++ b/core/host_test_internal.mk
@@ -2,14 +2,13 @@
 ## Shared definitions for all host test compilations.
 #####################################################
 
-ifeq ($(HOST_OS),windows)
-LOCAL_CFLAGS += -DGTEST_OS_WINDOWS
-else
-LOCAL_CFLAGS += -DGTEST_OS_LINUX
-LOCAL_LDLIBS += -lpthread
-endif
+LOCAL_CFLAGS_windows += -DGTEST_OS_WINDOWS
+LOCAL_CFLAGS_linux += -DGTEST_OS_LINUX
+LOCAL_LDLIBS_linux += -lpthread
+LOCAL_CFLAGS_darwin += -DGTEST_OS_LINUX
+LOCAL_LDLIBS_darwin += -lpthread
 
 LOCAL_CFLAGS += -DGTEST_HAS_STD_STRING -O0 -g
 LOCAL_C_INCLUDES +=  external/gtest/include
 
-LOCAL_STATIC_LIBRARIES += libgtest_host libgtest_main_host
+LOCAL_STATIC_LIBRARIES += libgtest_main_host libgtest_host
diff --git a/core/install_jni_libs_internal.mk b/core/install_jni_libs_internal.mk
index 16d0962..27b9697 100644
--- a/core/install_jni_libs_internal.mk
+++ b/core/install_jni_libs_internal.mk
@@ -55,7 +55,8 @@
 my_jni_filenames := $(notdir $(my_jni_shared_libraries))
 # Make sure the JNI libraries get installed
 my_shared_library_path := $($(my_2nd_arch_prefix)TARGET_OUT$(partition_tag)_SHARED_LIBRARIES)
-$(LOCAL_INSTALLED_MODULE) : | $(addprefix $(my_shared_library_path)/, $(my_jni_filenames))
+# Do not use order-only dependency, because we want to rebuild the image if an jni is updated.
+$(LOCAL_INSTALLED_MODULE) : $(addprefix $(my_shared_library_path)/, $(my_jni_filenames))
 
 # Create symlink in the app specific lib path
 ifdef LOCAL_POST_INSTALL_CMD
@@ -93,7 +94,7 @@
 $(foreach lib, $(my_prebuilt_jni_libs), \
     $(eval $(call copy-one-file, $(lib), $(my_app_lib_path)/$(notdir $(lib)))))
 
-$(LOCAL_INSTALLED_MODULE) : | $(addprefix $(my_app_lib_path)/, $(notdir $(my_prebuilt_jni_libs)))
+$(LOCAL_INSTALLED_MODULE) : $(addprefix $(my_app_lib_path)/, $(notdir $(my_prebuilt_jni_libs)))
 endif  # my_embed_jni
 endif  # inner my_prebuilt_jni_libs
 endif  # outer my_prebuilt_jni_libs
diff --git a/core/java.mk b/core/java.mk
index bac5ca7..f9305df 100644
--- a/core/java.mk
+++ b/core/java.mk
@@ -1,3 +1,4 @@
+# Target Java.
 # Requires:
 # LOCAL_MODULE_SUFFIX
 # LOCAL_MODULE_CLASS
@@ -277,26 +278,80 @@
 LOCAL_RESOURCE_DIR := $(LOCAL_INTERMEDIATE_SOURCE_DIR)/renderscript/res $(LOCAL_RESOURCE_DIR)
 endif
 
+
+###########################################################
+## AIDL: Compile .aidl files to .java
+###########################################################
+aidl_sources := $(filter %.aidl,$(LOCAL_SRC_FILES))
+
+ifneq ($(strip $(aidl_sources)),)
+aidl_java_sources := $(patsubst %.aidl,%.java,$(addprefix $(intermediates.COMMON)/src/, $(aidl_sources)))
+aidl_sources := $(addprefix $(LOCAL_PATH)/, $(aidl_sources))
+
+aidl_preprocess_import :=
+ifdef LOCAL_SDK_VERSION
+ifneq ($(filter current system_current, $(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS)),)
+  # LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS
+  aidl_preprocess_import := $(TARGET_OUT_COMMON_INTERMEDIATES)/framework.aidl
+else
+  aidl_preprocess_import := $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_VERSION)/framework.aidl
+endif # not current or system_current
+else
+# build against the platform.
+LOCAL_AIDL_INCLUDES += $(FRAMEWORKS_BASE_JAVA_SRC_DIRS)
+endif # LOCAL_SDK_VERSION
+$(aidl_java_sources): PRIVATE_AIDL_FLAGS := -b $(addprefix -p,$(aidl_preprocess_import)) -I$(LOCAL_PATH) -I$(LOCAL_PATH)/src $(addprefix -I,$(LOCAL_AIDL_INCLUDES))
+
+$(aidl_java_sources): $(intermediates.COMMON)/src/%.java: \
+        $(LOCAL_PATH)/%.aidl \
+        $(LOCAL_MODULE_MAKEFILE_DEP) \
+        $(LOCAL_ADDITIONAL_DEPENDENCIES) \
+        $(AIDL) \
+        $(aidl_preprocess_import)
+	$(transform-aidl-to-java)
+-include $(aidl_java_sources:%.java=%.P)
+
+else
+aidl_java_sources :=
+endif
+
+##########################################
+
 # All of the rules after full_classes_compiled_jar are very unlikely
 # to fail except for bugs in their respective tools.  If you would
 # like to run these rules, add the "all" modifier goal to the make
 # command line.
+ifndef LOCAL_CHECKED_MODULE
 ifdef full_classes_jar
-java_alternative_checked_module := $(full_classes_compiled_jar)
-else
-java_alternative_checked_module :=
+LOCAL_CHECKED_MODULE := $(full_classes_compiled_jar)
 endif
-
-# TODO: It looks like the only thing we need from base_rules is
-# all_java_sources.  See if we can get that by adding a
-# common_java.mk, and moving the include of base_rules.mk to
-# after all the declarations.
+endif
 
 #######################################
 include $(BUILD_SYSTEM)/base_rules.mk
 #######################################
 
-java_alternative_checked_module :=
+###########################################################
+## logtags: emit java source
+###########################################################
+ifneq ($(strip $(logtags_sources)),)
+
+logtags_java_sources := $(patsubst %.logtags,%.java,$(addprefix $(intermediates.COMMON)/src/, $(logtags_sources)))
+logtags_sources := $(addprefix $(LOCAL_PATH)/, $(logtags_sources))
+
+$(logtags_java_sources): $(intermediates.COMMON)/src/%.java: $(LOCAL_PATH)/%.logtags $(TARGET_OUT_COMMON_INTERMEDIATES)/all-event-log-tags.txt
+	$(transform-logtags-to-java)
+
+else
+logtags_java_sources :=
+endif
+
+##########################################
+java_sources := $(addprefix $(LOCAL_PATH)/, $(filter %.java,$(LOCAL_SRC_FILES))) $(aidl_java_sources) $(logtags_java_sources) \
+                $(filter %.java,$(LOCAL_GENERATED_SOURCES))
+all_java_sources := $(java_sources) $(addprefix $(TARGET_OUT_COMMON_INTERMEDIATES)/, $(filter %.java,$(LOCAL_INTERMEDIATE_SOURCES)))
+
+include $(BUILD_SYSTEM)/java_common.mk
 
 #######################################
 # defines built_odex along with rule to install odex
@@ -310,38 +365,6 @@
 endif
 endif
 
-# Install the RS compatibility libraries to /system/lib/ if necessary
-ifdef rs_compatibility_jni_libs
-installed_rs_compatibility_jni_libs := $(addprefix $(TARGET_OUT_SHARED_LIBRARIES)/,\
-    $(notdir $(rs_compatibility_jni_libs)))
-# Provide a way to skip sources included in multiple projects.
-ifdef LOCAL_RENDERSCRIPT_SKIP_INSTALL
-skip_install_rs_libs := $(patsubst %.rs,%.so, \
-    $(addprefix $(TARGET_OUT_SHARED_LIBRARIES)/librs., \
-    $(notdir $(LOCAL_RENDERSCRIPT_SKIP_INSTALL))))
-installed_rs_compatibility_jni_libs := \
-    $(filter-out $(skip_install_rs_libs),$(installed_rs_compatibility_jni_libs))
-endif
-ifneq (,$(strip $(installed_rs_compatibility_jni_libs)))
-$(installed_rs_compatibility_jni_libs) : $(TARGET_OUT_SHARED_LIBRARIES)/lib%.so : \
-    $(renderscript_intermediate)/lib%.so
-	$(hide) mkdir -p $(dir $@) && cp -f $< $@
-
-# Install them only if the current module is installed.
-$(LOCAL_INSTALLED_MODULE) : $(installed_rs_compatibility_jni_libs)
-endif
-endif
-
-# We use intermediates.COMMON because the classes.jar/.dex files will be
-# common even if LOCAL_BUILT_MODULE isn't.
-#
-# Override some target variables that base_rules set up for us.
-$(LOCAL_INTERMEDIATE_TARGETS): \
-	PRIVATE_CLASS_INTERMEDIATES_DIR := $(intermediates.COMMON)/classes
-$(LOCAL_INTERMEDIATE_TARGETS): \
-	PRIVATE_SOURCE_INTERMEDIATES_DIR := $(LOCAL_INTERMEDIATE_SOURCE_DIR)
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RMTYPEDEFS := $(LOCAL_RMTYPEDEFS)
-
 # Since we're using intermediates.COMMON, make sure that it gets cleaned
 # properly.
 $(cleantarget): PRIVATE_CLEAN_FILES += $(intermediates.COMMON)
@@ -376,7 +399,7 @@
 # This intentionally depends on java_sources, not all_java_sources.
 # Deps for generated source files must be handled separately,
 # via deps on the target that generates the sources.
-$(full_classes_compiled_jar): PRIVATE_JAVACFLAGS := $(LOCAL_JAVACFLAGS)
+$(full_classes_compiled_jar): PRIVATE_JAVACFLAGS := $(GLOBAL_JAVAC_DEBUG_FLAGS) $(LOCAL_JAVACFLAGS)
 $(full_classes_compiled_jar): PRIVATE_JAR_EXCLUDE_FILES := $(LOCAL_JAR_EXCLUDE_FILES)
 $(full_classes_compiled_jar): PRIVATE_JAR_PACKAGES := $(LOCAL_JAR_PACKAGES)
 $(full_classes_compiled_jar): PRIVATE_JAR_EXCLUDE_PACKAGES := $(LOCAL_JAR_EXCLUDE_PACKAGES)
@@ -389,12 +412,10 @@
         $(layers_file) \
         $(RenderScript_file_stamp) \
         $(proto_java_sources_file_stamp) \
-        $(LOCAL_MODULE_MAKEFILE) \
+        $(LOCAL_MODULE_MAKEFILE_DEP) \
         $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-java-to-classes.jar)
 
-$(full_classes_compiled_jar): PRIVATE_JAVAC_DEBUG_FLAGS := -g
-
 # Run jarjar if necessary, otherwise just copy the file.
 ifneq ($(strip $(LOCAL_JARJAR_RULES)),)
 $(full_classes_jarjar_jar): PRIVATE_JARJAR_RULES := $(LOCAL_JARJAR_RULES)
@@ -607,8 +628,6 @@
 endif
 
 ifdef full_classes_jar
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JACK_DEBUG_FLAGS := -g
-
 ifdef LOCAL_PROGUARD_ENABLED
 
 ifndef LOCAL_JACK_PROGUARD_FLAGS
@@ -624,12 +643,13 @@
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JACK_PROGUARD_FLAGS :=
 endif # LOCAL_PROGUARD_ENABLED defined
 
-$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JACK_FLAGS := $(LOCAL_JACK_FLAGS)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JACK_FLAGS := $(GLOBAL_JAVAC_DEBUG_FLAGS) $(LOCAL_JACK_FLAGS)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JACK_VERSION := $(LOCAL_JACK_VERSION)
 
 jack_all_deps := $(java_sources) $(java_resource_sources) $(full_jack_lib_deps) \
         $(jar_manifest_file) $(layers_file) $(RenderScript_file_stamp) $(proguard_flag_files) \
         $(proto_java_sources_file_stamp) $(LOCAL_ADDITIONAL_DEPENDENCIES) $(LOCAL_JARJAR_RULES) \
-        $(LOCAL_MODULE_MAKEFILE) $(JACK_JAR) $(JACK_LAUNCHER_JAR)
+        $(LOCAL_MODULE_MAKEFILE_DEP) $(JACK)
 
 ifeq ($(LOCAL_IS_STATIC_JAVA_LIBRARY),true)
 $(full_classes_jack): $(jack_all_deps)
diff --git a/core/java_common.mk b/core/java_common.mk
new file mode 100644
index 0000000..9d81096
--- /dev/null
+++ b/core/java_common.mk
@@ -0,0 +1,326 @@
+# Common to host and target Java modules.
+
+###########################################################
+## .proto files: Compile proto files to .java
+###########################################################
+proto_sources := $(filter %.proto,$(LOCAL_SRC_FILES))
+# Because names of the .java files compiled from .proto files are unknown until the
+# .proto files are compiled, we use a timestamp file as depedency.
+proto_java_sources_file_stamp :=
+ifneq ($(proto_sources),)
+proto_sources_fullpath := $(addprefix $(LOCAL_PATH)/, $(proto_sources))
+
+# By putting the generated java files into $(LOCAL_INTERMEDIATE_SOURCE_DIR), they will be
+# automatically found by the java compiling function transform-java-to-classes.jar.
+proto_java_intemediate_dir := $(LOCAL_INTERMEDIATE_SOURCE_DIR)/proto
+proto_java_sources_file_stamp := $(proto_java_intemediate_dir)/Proto.stamp
+proto_java_sources_dir := $(proto_java_intemediate_dir)/src
+
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_INCLUDES := $(TOP)
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_SRC_FILES := $(proto_sources_fullpath)
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_DIR := $(proto_java_sources_dir)
+ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),micro)
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --javamicro_out
+else
+  ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),nano)
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --javanano_out
+  else
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --java_out
+  endif
+endif
+$(proto_java_sources_file_stamp): PRIVATE_PROTOC_FLAGS := $(LOCAL_PROTOC_FLAGS)
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_PARAMS := $(LOCAL_PROTO_JAVA_OUTPUT_PARAMS)
+$(proto_java_sources_file_stamp) : $(proto_sources_fullpath) $(PROTOC)
+	$(call transform-proto-to-java)
+
+#TODO: protoc should output the dependencies introduced by imports.
+endif # proto_sources
+
+#########################################
+## Java resources
+
+# Look for resource files in any specified directories.
+# Non-java and non-doc files will be picked up as resources
+# and included in the output jar file.
+java_resource_file_groups :=
+
+LOCAL_JAVA_RESOURCE_DIRS := $(strip $(LOCAL_JAVA_RESOURCE_DIRS))
+ifneq ($(LOCAL_JAVA_RESOURCE_DIRS),)
+  # This makes a list of words like
+  #     <dir1>::<file1>:<file2> <dir2>::<file1> <dir3>:
+  # where each of the files is relative to the directory it's grouped with.
+  # Directories that don't contain any resource files will result in groups
+  # that end with a colon, and they are stripped out in the next step.
+  java_resource_file_groups += \
+    $(foreach dir,$(LOCAL_JAVA_RESOURCE_DIRS), \
+	$(subst $(space),:,$(strip \
+		$(LOCAL_PATH)/$(dir): \
+	    $(patsubst ./%,%,$(sort $(shell cd $(LOCAL_PATH)/$(dir) && \
+		find . \
+		    -type d -a -name ".svn" -prune -o \
+		    -type f \
+			-a \! -name "*.java" \
+			-a \! -name "package.html" \
+			-a \! -name "overview.html" \
+			-a \! -name ".*.swp" \
+			-a \! -name ".DS_Store" \
+			-a \! -name "*~" \
+			-print \
+		    ))) \
+	)) \
+    )
+  java_resource_file_groups := $(filter-out %:,$(java_resource_file_groups))
+endif # LOCAL_JAVA_RESOURCE_DIRS
+
+LOCAL_JAVA_RESOURCE_FILES := $(strip $(LOCAL_JAVA_RESOURCE_FILES))
+ifneq ($(LOCAL_JAVA_RESOURCE_FILES),)
+  java_resource_file_groups += \
+    $(foreach f,$(LOCAL_JAVA_RESOURCE_FILES), \
+	$(patsubst %/,%,$(dir $(f)))::$(notdir $(f)) \
+     )
+endif # LOCAL_JAVA_RESOURCE_FILES
+
+ifdef java_resource_file_groups
+  # The full paths to all resources, used for dependencies.
+  java_resource_sources := \
+    $(foreach group,$(java_resource_file_groups), \
+	$(addprefix $(word 1,$(subst :,$(space),$(group)))/, \
+	    $(wordlist 2,9999,$(subst :,$(space),$(group))) \
+	) \
+    )
+  # The arguments to jar that will include these files in a jar file.
+  # Quote the file name to handle special characters (such as #) correctly.
+  extra_jar_args := \
+    $(foreach group,$(java_resource_file_groups), \
+	$(addprefix -C "$(word 1,$(subst :,$(space),$(group)))" , \
+	    $(foreach w, $(wordlist 2,9999,$(subst :,$(space),$(group))), "$(w)" ) \
+	) \
+    )
+  java_resource_file_groups :=
+else
+  java_resource_sources :=
+  extra_jar_args :=
+endif # java_resource_file_groups
+
+######################################
+## PRIVATE java vars
+# LOCAL_SOURCE_FILES_ALL_GENERATED is set only if the module does not have static source files,
+# but generated source files in its LOCAL_INTERMEDIATE_SOURCE_DIR.
+# You have to set up the dependency in some other way.
+need_compile_java := $(strip $(all_java_sources)$(all_res_assets)$(java_resource_sources))$(LOCAL_STATIC_JAVA_LIBRARIES)$(filter true,$(LOCAL_SOURCE_FILES_ALL_GENERATED))
+ifdef need_compile_java
+
+full_static_java_libs := \
+    $(foreach lib,$(LOCAL_STATIC_JAVA_LIBRARIES), \
+      $(call intermediates-dir-for, \
+        JAVA_LIBRARIES,$(lib),$(LOCAL_IS_HOST_MODULE),COMMON)/javalib.jar)
+
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_STATIC_JAVA_LIBRARIES := $(full_static_java_libs)
+
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RESOURCE_DIR := $(LOCAL_RESOURCE_DIR)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_ASSET_DIR := $(LOCAL_ASSET_DIR)
+
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_CLASS_INTERMEDIATES_DIR := $(intermediates.COMMON)/classes
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_SOURCE_INTERMEDIATES_DIR := $(intermediates.COMMON)/src
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JAVA_SOURCES := $(all_java_sources)
+
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RMTYPEDEFS := $(LOCAL_RMTYPEDEFS)
+
+# full_java_libs: The list of files that should be used as the classpath.
+#                 Using this list as a dependency list WILL NOT WORK.
+# full_java_lib_deps: Should be specified as a prerequisite of this module
+#                 to guarantee that the files in full_java_libs will
+#                 be up-to-date.
+ifndef LOCAL_IS_HOST_MODULE
+ifeq ($(LOCAL_SDK_VERSION),)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,core-libart)
+else
+ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),current)
+# LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS.
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,android_stubs_current)
+else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),system_current)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,android_system_stubs_current)
+else
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,sdk_v$(LOCAL_SDK_VERSION))
+endif # current or system_current
+endif # LOCAL_SDK_VERSION
+
+full_shared_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+full_java_lib_deps := $(call java-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+
+else # LOCAL_IS_HOST_MODULE
+
+ifeq ($(USE_CORE_LIB_BOOTCLASSPATH),true)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH := -bootclasspath $(call java-lib-files,core-libart-hostdex,$(LOCAL_IS_HOST_MODULE))
+
+full_shared_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+full_java_lib_deps := $(call java-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE)) \
+    $(full_shared_java_libs)
+else
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH :=
+
+full_shared_java_libs := $(addprefix $(HOST_OUT_JAVA_LIBRARIES)/,\
+    $(addsuffix $(COMMON_JAVA_PACKAGE_SUFFIX),$(LOCAL_JAVA_LIBRARIES)))
+full_java_lib_deps := $(full_shared_java_libs)
+endif # USE_CORE_LIB_BOOTCLASSPATH
+endif # !LOCAL_IS_HOST_MODULE
+
+full_java_libs := $(full_shared_java_libs) $(full_static_java_libs) $(LOCAL_CLASSPATH)
+full_java_lib_deps := $(full_java_lib_deps) $(full_static_java_libs) $(LOCAL_CLASSPATH)
+
+ifndef LOCAL_IS_HOST_MODULE
+# This is set by packages that are linking to other packages that export
+# shared libraries, allowing them to make use of the code in the linked apk.
+apk_libraries := $(sort $(LOCAL_APK_LIBRARIES) $(LOCAL_RES_LIBRARIES))
+ifneq ($(apk_libraries),)
+  link_apk_libraries := \
+      $(foreach lib,$(apk_libraries), \
+        $(call intermediates-dir-for, \
+              APPS,$(lib),,COMMON)/classes.jar)
+
+  # link against the jar with full original names (before proguard processing).
+  full_shared_java_libs += $(link_apk_libraries)
+  full_java_libs += $(link_apk_libraries)
+  full_java_lib_deps += $(link_apk_libraries)
+endif
+
+# This is set by packages that contain instrumentation, allowing them to
+# link against the package they are instrumenting.  Currently only one such
+# package is allowed.
+LOCAL_INSTRUMENTATION_FOR := $(strip $(LOCAL_INSTRUMENTATION_FOR))
+ifdef LOCAL_INSTRUMENTATION_FOR
+  ifneq ($(words $(LOCAL_INSTRUMENTATION_FOR)),1)
+    $(error \
+        $(LOCAL_PATH): Multiple LOCAL_INSTRUMENTATION_FOR members defined)
+  endif
+
+  link_instr_intermediates_dir.COMMON := $(call intermediates-dir-for, \
+      APPS,$(LOCAL_INSTRUMENTATION_FOR),,COMMON)
+  # link against the jar with full original names (before proguard processing).
+  link_instr_classes_jar := $(link_instr_intermediates_dir.COMMON)/classes.jar
+  full_java_libs += $(link_instr_classes_jar)
+  full_java_lib_deps += $(link_instr_classes_jar)
+endif  # LOCAL_INSTRUMENTATION_FOR
+endif  # LOCAL_IS_HOST_MODULE
+
+endif  # need_compile_java
+
+# We may want to add jar manifest or jar resource files even if there is no java code at all.
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_EXTRA_JAR_ARGS := $(extra_jar_args)
+jar_manifest_file :=
+ifneq ($(strip $(LOCAL_JAR_MANIFEST)),)
+jar_manifest_file := $(LOCAL_PATH)/$(LOCAL_JAR_MANIFEST)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JAR_MANIFEST := $(jar_manifest_file)
+else
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_JAR_MANIFEST :=
+endif
+
+##########################################################
+ifndef LOCAL_IS_HOST_MODULE
+## AAPT Flags
+# aapt doesn't accept multiple --extra-packages flags.
+# We have to collapse them into a single --extra-packages flag here.
+LOCAL_AAPT_FLAGS := $(strip $(LOCAL_AAPT_FLAGS))
+ifdef LOCAL_AAPT_FLAGS
+ifeq ($(filter 0 1,$(words $(filter --extra-packages,$(LOCAL_AAPT_FLAGS)))),)
+aapt_flags := $(subst --extra-packages$(space),--extra-packages@,$(LOCAL_AAPT_FLAGS))
+aapt_flags_extra_packages := $(patsubst --extra-packages@%,%,$(filter --extra-packages@%,$(aapt_flags)))
+aapt_flags_extra_packages := $(sort $(subst :,$(space),$(aapt_flags_extra_packages)))
+LOCAL_AAPT_FLAGS := $(filter-out --extra-packages@%,$(aapt_flags)) \
+    --extra-packages $(subst $(space),:,$(aapt_flags_extra_packages))
+aapt_flags_extra_packages :=
+aapt_flags :=
+endif
+endif
+
+$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_AAPT_FLAGS := $(LOCAL_AAPT_FLAGS) $(PRODUCT_AAPT_FLAGS)
+$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_MANIFEST_PACKAGE_NAME := $(LOCAL_MANIFEST_PACKAGE_NAME)
+$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_MANIFEST_INSTRUMENTATION_FOR := $(LOCAL_MANIFEST_INSTRUMENTATION_FOR)
+
+ifdef aidl_sources
+ALL_MODULES.$(my_register_name).AIDL_FILES := $(aidl_sources)
+endif
+endif  # !LOCAL_IS_HOST_MODULE
+
+$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_ALL_JAVA_LIBRARIES := $(full_java_libs)
+
+ALL_MODULES.$(my_register_name).INTERMEDIATE_SOURCE_DIR := \
+    $(ALL_MODULES.$(my_register_name).INTERMEDIATE_SOURCE_DIR) $(LOCAL_INTERMEDIATE_SOURCE_DIR)
+
+###########################################################
+# JACK
+###########################################################
+ifdef LOCAL_JACK_ENABLED
+ifdef need_compile_java
+
+full_static_jack_libs := \
+    $(foreach lib,$(LOCAL_STATIC_JAVA_LIBRARIES), \
+      $(call intermediates-dir-for, \
+        JAVA_LIBRARIES,$(lib),$(LOCAL_IS_HOST_MODULE),COMMON)/classes.jack)
+
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_STATIC_JACK_LIBRARIES := $(full_static_jack_libs)
+
+ifndef LOCAL_IS_HOST_MODULE
+ifeq ($(LOCAL_SDK_VERSION),)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,core-libart)
+else
+ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),current)
+# LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS.
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,android_stubs_current)
+else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),system_current)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,android_system_stubs_current)
+else
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,sdk_v$(LOCAL_SDK_VERSION))
+endif # current or system_current
+endif # LOCAL_SDK_VERSION
+
+full_shared_jack_libs := $(call jack-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+full_jack_lib_deps := $(call jack-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+
+else # LOCAL_IS_HOST_MODULE
+
+ifeq ($(USE_CORE_LIB_BOOTCLASSPATH),true)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES := $(call jack-lib-files,core-libart-hostdex,$(LOCAL_IS_HOST_MODULE))
+full_shared_jack_libs := $(call jack-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+full_jack_lib_deps := $(call jack-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+else
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_BOOTCLASSPATH_JAVA_LIBRARIES :=
+full_shared_jack_libs := $(call jack-lib-deps,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
+full_jack_lib_deps := $(full_shared_jack_libs)
+endif # USE_CORE_LIB_BOOTCLASSPATH
+endif # !LOCAL_IS_HOST_MODULE
+full_jack_libs := $(full_shared_jack_libs) $(full_static_jack_libs) $(LOCAL_JACK_CLASSPATH)
+full_jack_lib_deps += $(full_static_jack_libs) $(LOCAL_JACK_CLASSPATH)
+
+ifndef LOCAL_IS_HOST_MODULE
+# This is set by packages that are linking to other packages that export
+# shared libraries, allowing them to make use of the code in the linked apk.
+ifneq ($(apk_libraries),)
+  link_apk_jack_libraries := \
+      $(foreach lib,$(apk_libraries), \
+        $(call intermediates-dir-for, \
+              APPS,$(lib),,COMMON)/classes.jack)
+
+  # link against the jar with full original names (before proguard processing).
+  full_shared_jack_libs += $(link_apk_jack_libraries)
+  full_jack_libs += $(link_apk_jack_libraries)
+  full_jack_lib_deps += $(link_apk_jack_libraries)
+endif
+
+# This is set by packages that contain instrumentation, allowing them to
+# link against the package they are instrumenting.  Currently only one such
+# package is allowed.
+ifdef LOCAL_INSTRUMENTATION_FOR
+   # link against the jar with full original names (before proguard processing).
+   link_instr_classes_jack := $(link_instr_intermediates_dir.COMMON)/classes.noshrob.jack
+   full_jack_libs += $(link_instr_classes_jack)
+   full_jack_lib_deps += $(link_instr_classes_jack)
+endif  # LOCAL_INSTRUMENTATION_FOR
+endif  # !LOCAL_IS_HOST_MODULE
+
+# Propagate local configuration options to this target.
+$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_ALL_JACK_LIBRARIES:= $(full_jack_libs)
+$(LOCAL_INTERMEDIATE_TARGETS) : PRIVATE_JARJAR_RULES := $(LOCAL_JARJAR_RULES)
+
+endif  # need_compile_java
+endif # LOCAL_JACK_ENABLED
diff --git a/core/java_library.mk b/core/java_library.mk
index 5a2d19b..dc6186f 100644
--- a/core/java_library.mk
+++ b/core/java_library.mk
@@ -81,7 +81,7 @@
 $(common_javalib.jar): PRIVATE_DEX_FILE := $(built_dex)
 $(common_javalib.jar): PRIVATE_SOURCE_ARCHIVE := $(full_classes_jarjar_jar)
 $(common_javalib.jar): PRIVATE_DONT_DELETE_JAR_DIRS := $(LOCAL_DONT_DELETE_JAR_DIRS)
-$(common_javalib.jar) : $(built_dex) $(java_resource_sources)
+$(common_javalib.jar) : $(built_dex) $(java_resource_sources) | $(ZIPTIME)
 	@echo "target Jar: $(PRIVATE_MODULE) ($@)"
 ifdef LOCAL_JACK_ENABLED
 	$(create-empty-package)
@@ -92,6 +92,7 @@
 ifdef LOCAL_JACK_ENABLED
 	$(add-carried-jack-resources)
 endif
+	$(remove-timestamps-from-package)
 
 ifdef LOCAL_DEX_PREOPT
 ifneq ($(dexpreopt_boot_jar_module),) # boot jar
diff --git a/core/legacy_prebuilts.mk b/core/legacy_prebuilts.mk
index c477900..f4633d0 100644
--- a/core/legacy_prebuilts.mk
+++ b/core/legacy_prebuilts.mk
@@ -22,68 +22,11 @@
 # to add any new such module in the system
 
 GRANDFATHERED_ALL_PREBUILT := \
-	akmd2 \
-	ap_gain.bin \
-	AVRCP.kl \
-	batch \
-	bitmap_size.txt \
 	bmgr \
-	bp.img \
-	brcm_guci_drv \
-	bypassfactory \
-	cdt.bin \
-	chat-ril \
-	cpcap-key.kl \
-	egl.cfg \
-	firmware_error.565 \
-	firmware_install.565 \
-	ftmipcd \
-	gps.conf \
-	gpsconfig.xml \
-	gps.stingray.so \
-	gralloc.omap3.so \
-	gralloc.tegra.so \
-	hwcomposer.tegra.so \
 	ime \
-	init.goldfish.rc \
-	init.goldfish.sh \
-	init.olympus.rc \
-	init.sholes.rc \
-	init.stingray.rc \
 	input \
-	kernel \
-	lbl \
-	libEGL_POWERVR_SGX530_121.so \
-	libEGL_tegra.so \
-	libGLESv1_CM_POWERVR_SGX530_121.so \
-	libGLESv1_CM_tegra.so \
-	libGLESv2_POWERVR_SGX530_121.so \
-	libGLESv2_tegra.so \
-	libmoto_ril.so \
-	libpppd_plugin-ril.so \
-	libril_rds.so \
-	location \
-	location.cfg \
-	main.conf \
-	mbm.bin \
-	mbm_consumer.bin \
-	mdm_panicd \
 	monkey \
 	pm \
-	pppd-ril \
-	pppd-ril.options \
-	qwerty.kl \
-	radio.img \
-	rdl.bin \
 	RFFspeed_501.bmd \
 	RFFstd_501.bmd \
-	savebpver \
-	sholes-keypad.kl \
-	suplcerts.bks \
-	svc \
-	tcmd \
-	ueventd.goldfish.rc \
-	ueventd.olympus.rc \
-	ueventd.stingray.rc \
-	vold.fstab \
-	wl1271.bin
+	svc
diff --git a/core/main.mk b/core/main.mk
index 5b6e1e9..2bd3163 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -38,8 +38,6 @@
 #endif
 
 # Check for broken versions of make.
-# (Allow any version under Cygwin since we don't actually build the platform there.)
-ifeq (,$(findstring CYGWIN,$(shell uname -sm)))
 ifneq (1,$(strip $(shell expr $(MAKE_VERSION) \>= 3.81)))
 $(warning ********************************************************************************)
 $(warning *  You are using version $(MAKE_VERSION) of make.)
@@ -48,7 +46,6 @@
 $(warning ********************************************************************************)
 $(error stopping)
 endif
-endif
 
 # Absolute path of the present working direcotry.
 # This overrides the shell variable $PWD, which does not necessarily points to
@@ -63,7 +60,10 @@
 # This is the default target.  It must be the first declared target.
 .PHONY: droid
 DEFAULT_GOAL := droid
-$(DEFAULT_GOAL):
+$(DEFAULT_GOAL): droid_targets
+
+.PHONY: droid_targets
+droid_targets:
 
 # Used to force goals to build.  Only use for conditionally defined goals.
 .PHONY: FORCE
@@ -80,12 +80,15 @@
     vendorimage-nodeps \
     ramdisk-nodeps \
     bootimage-nodeps \
-    recoveryimage-nodeps
+    recoveryimage-nodeps \
+    product-graph dump-products
 
 ifneq ($(filter $(dont_bother_goals), $(MAKECMDGOALS)),)
 dont_bother := true
 endif
 
+ORIGINAL_MAKECMDGOALS := $(MAKECMDGOALS)
+
 # Targets that provide quick help on the build system.
 include $(BUILD_SYSTEM)/help.mk
 
@@ -93,6 +96,37 @@
 # and host information.
 include $(BUILD_SYSTEM)/config.mk
 
+relaunch_with_ninja :=
+ifneq ($(USE_NINJA),false)
+ifndef BUILDING_WITH_NINJA
+relaunch_with_ninja := true
+endif
+endif
+
+ifeq ($(relaunch_with_ninja),true)
+# Mark this is a ninja build.
+$(shell mkdir -p $(OUT_DIR) && touch $(OUT_DIR)/ninja_build)
+include build/core/ninja.mk
+else # !relaunch_with_ninja
+ifndef BUILDING_WITH_NINJA
+# Remove ninja build mark if it exists.
+$(shell rm -f $(OUT_DIR)/ninja_build)
+endif
+
+# Write the build number to a file so it can be read back in
+# without changing the command line every time.  Avoids rebuilds
+# when using ninja.
+$(shell mkdir -p $(OUT_DIR) && \
+    echo -n $(BUILD_NUMBER) > $(OUT_DIR)/build_number.txt && \
+    echo -n $(BUILD_DATETIME) > $(OUT_DIR)/build_date.txt)
+BUILD_NUMBER_FROM_FILE := $$(cat $(OUT_DIR)/build_number.txt)
+BUILD_DATETIME_FROM_FILE := $$(cat $(OUT_DIR)/build_date.txt)
+ifeq ($(HOST_OS),darwin)
+DATE_FROM_FILE := date -r $(BUILD_DATETIME_FROM_FILE)
+else
+DATE_FROM_FILE := date -d @$(BUILD_DATETIME_FROM_FILE)
+endif
+
 # CTS-specific config.
 -include cts/build/config.mk
 
@@ -111,7 +145,6 @@
 
 $(info Checking build tools versions...)
 
-ifneq ($(HOST_OS),windows)
 # check for a case sensitive file system
 ifneq (a,$(shell mkdir -p $(OUT_DIR) ; \
                 echo a > $(OUT_DIR)/casecheck.txt; \
@@ -123,7 +156,6 @@
 $(warning ************************************************************)
 $(error Case-insensitive filesystems not supported)
 endif
-endif
 
 # Make sure that there are no spaces in the absolute path; the
 # build system can't deal with them.
@@ -148,7 +180,7 @@
 ifneq ($(EXPERIMENTAL_USE_JAVA8),)
 required_version := "1.8.x"
 required_javac_version := "1.8"
-java_version := $(shell echo '$(java_version_str)' | grep 'openjdk .*[ "]1\.8[\. "$$]')
+java_version := $(shell echo '$(java_version_str)' | grep '[ "]1\.8[\. "$$]')
 javac_version := $(shell echo '$(javac_version_str)' | grep '[ "]1\.8[\. "$$]')
 else # default
 required_version := "1.7.x"
@@ -175,7 +207,7 @@
 #
 # For Java 1.7, we require OpenJDK on linux and Oracle JDK on Mac OS.
 requires_openjdk := false
-ifeq ($(HOST_OS), linux)
+ifeq ($(BUILD_OS),linux)
 requires_openjdk := true
 endif
 
@@ -281,6 +313,12 @@
 # The pdk (Platform Development Kit) build
 include build/core/pdk_config.mk
 
+#
+# -----------------------------------------------------------------
+# Jack version configuration
+-include $(TOPDIR)prebuilts/sdk/tools/jack_versions.mk
+-include $(TOPDIR)prebuilts/sdk/tools/jack_for_module.mk
+
 # -----------------------------------------------------------------
 ###
 ### In this section we set up the things that are different
@@ -295,7 +333,7 @@
 
 # Add build properties for ART. These define system properties used by installd
 # to pass flags to dex2oat.
-ADDITIONAL_BUILD_PROPERTIES += persist.sys.dalvik.vm.lib.2=libart
+ADDITIONAL_BUILD_PROPERTIES += persist.sys.dalvik.vm.lib.2=libart.so
 ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).variant=$(DEX2OAT_TARGET_CPU_VARIANT)
 ifneq ($(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),)
   ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).features=$(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES)
@@ -388,7 +426,7 @@
 sdk_repo_goal := $(strip $(filter sdk_repo,$(MAKECMDGOALS)))
 MAKECMDGOALS := $(strip $(filter-out sdk_repo,$(MAKECMDGOALS)))
 
-ifneq ($(words $(filter-out $(INTERNAL_MODIFIER_TARGETS) checkbuild emulator_tests target-files-package,$(MAKECMDGOALS))),1)
+ifneq ($(words $(sort $(filter-out $(INTERNAL_MODIFIER_TARGETS) checkbuild emulator_tests target-files-package,$(MAKECMDGOALS)))),1)
 $(error The 'sdk' target may not be specified with any other targets)
 endif
 
@@ -434,21 +472,6 @@
 $(INTERNAL_MODIFIER_TARGETS): $(DEFAULT_GOAL)
 endif
 
-# Bring in all modules that need to be built.
-ifeq ($(HOST_OS),windows)
-SDK_ONLY := true
-endif
-
-ifeq ($(SDK_ONLY),true)
-include $(TOPDIR)sdk/build/windows_sdk_whitelist.mk
-include $(TOPDIR)development/build/windows_sdk_whitelist.mk
-
-# Exclude tools/acp when cross-compiling windows under linux
-ifeq ($(findstring Linux,$(UNAME)),)
-subdirs += build/tools/acp
-endif
-
-else	# !SDK_ONLY
 #
 # Typical build; include any Android.mk files we can find.
 #
@@ -456,8 +479,6 @@
 
 FULL_BUILD := true
 
-endif	# !SDK_ONLY
-
 # Before we go and include all of the module makefiles, stash away
 # the PRODUCT_* values so that later we can verify they are not modified.
 stash_product_vars:=true
@@ -484,6 +505,7 @@
 # A helper goal printing out install paths
 .PHONY: GET-INSTALL-PATH
 GET-INSTALL-PATH:
+	@echo "Install paths for modules in $(ONE_SHOT_MAKEFILE):"
 	@$(foreach m, $(ALL_MODULES), $(if $(ALL_MODULES.$(m).INSTALLED), \
 		echo 'INSTALL-PATH: $(m) $(ALL_MODULES.$(m).INSTALLED)';))
 
@@ -569,6 +591,8 @@
     $(m))))
 endef
 
+# If a module is for a cross host os, the required modules must be for
+# that OS too.
 # If a module is built for 32-bit, the required modules must be 32-bit too;
 # Otherwise if the module is an exectuable or shared library,
 #   the required modules must be 64-bit;
@@ -576,6 +600,8 @@
 $(foreach m,$(ALL_MODULES),\
   $(eval r := $(ALL_MODULES.$(m).REQUIRED))\
   $(if $(r),\
+    $(if $(ALL_MODULES.$(m).FOR_HOST_CROSS),\
+      $(eval r := $(addprefix host_cross_,$(r))))\
     $(if $(ALL_MODULES.$(m).FOR_2ND_ARCH),\
       $(eval r_r := $(call get-32-bit-modules-if-we-can,$(r))),\
       $(if $(filter EXECUTABLES SHARED_LIBRARIES,$(ALL_MODULES.$(m).CLASS)),\
@@ -598,32 +624,40 @@
     $(eval r := $(call module-installed-files,$(r))) \
     $(eval t_m := $(filter $(TARGET_OUT_ROOT)/%, $(ALL_MODULES.$(m).INSTALLED))) \
     $(eval h_m := $(filter $(HOST_OUT_ROOT)/%, $(ALL_MODULES.$(m).INSTALLED))) \
+    $(eval hc_m := $(filter $(HOST_CROSS_OUT_ROOT)/%, $(ALL_MODULES.$(m).INSTALLED))) \
     $(eval t_r := $(filter $(TARGET_OUT_ROOT)/%, $(r))) \
     $(eval h_r := $(filter $(HOST_OUT_ROOT)/%, $(r))) \
+    $(eval hc_r := $(filter $(HOST_CROSS_OUT_ROOT)/%, $(r))) \
     $(eval t_m := $(filter-out $(t_r), $(t_m))) \
     $(eval h_m := $(filter-out $(h_r), $(h_m))) \
+    $(eval hc_m := $(filter-out $(hc_r), $(hc_m))) \
     $(if $(t_m), $(eval $(call add-required-deps, $(t_m),$(t_r)))) \
     $(if $(h_m), $(eval $(call add-required-deps, $(h_m),$(h_r)))) \
+    $(if $(hc_m), $(eval $(call add-required-deps, $(hc_m),$(hc_r)))) \
    ) \
  )
 
 t_m :=
 h_m :=
+hc_m :=
 t_r :=
 h_r :=
+hc_r :=
 
 # Establish the dependecies on the shared libraries.
 # It also adds the shared library module names to ALL_MODULES.$(m).REQUIRED,
 # so they can be expanded to product_MODULES later.
-# $(1): TARGET_ or HOST_.
+# $(1): TARGET_ or HOST_ or HOST_CROSS_.
 # $(2): non-empty for 2nd arch.
+# $(3): non-empty for host cross compile.
 define resolve-shared-libs-depes
 $(foreach m,$($(if $(2),$($(1)2ND_ARCH_VAR_PREFIX))$(1)DEPENDENCIES_ON_SHARED_LIBRARIES),\
   $(eval p := $(subst :,$(space),$(m)))\
   $(eval mod := $(firstword $(p)))\
   $(eval deps := $(subst $(comma),$(space),$(lastword $(p))))\
   $(if $(2),$(eval deps := $(addsuffix $($(1)2ND_ARCH_MODULE_SUFFIX),$(deps))))\
-  $(eval r := $(filter $($(1)OUT_ROOT)/%,$(call module-installed-files,\
+  $(if $(3),$(eval deps := $(addprefix host_cross_,$(deps))))\
+  $(eval r := $(filter $($(1)OUT)/%,$(call module-installed-files,\
     $(deps))))\
   $(eval $(call add-required-deps,$(word 2,$(p)),$(r)))\
   $(eval ALL_MODULES.$(mod).REQUIRED += $(deps)))
@@ -637,6 +671,9 @@
 ifdef HOST_2ND_ARCH
 $(call resolve-shared-libs-depes,HOST_,true)
 endif
+ifdef HOST_CROSS_OS
+$(call resolve-shared-libs-depes,HOST_CROSS_,,true)
+endif
 
 m :=
 r :=
@@ -823,12 +860,9 @@
 # -------------------------------------------------------------------
 
 .PHONY: checkbuild
-checkbuild: $(modules_to_check)
-ifeq (true,$(ANDROID_BUILD_EVERYTHING_BY_DEFAULT)$(filter $(MAKECMDGOALS),checkbuild))
+checkbuild: $(modules_to_check) droid_targets
+ifeq (true,$(ANDROID_BUILD_EVERYTHING_BY_DEFAULT))
 droid: checkbuild
-else
-# ANDROID_BUILD_EVERYTHING_BY_DEFAULT not set, or checkbuild is one of the cmd goals.
-checkbuild: droid
 endif
 
 .PHONY: ramdisk
@@ -865,7 +899,8 @@
 all_modules: $(ALL_MODULES)
 else
 # BUILD_MODULES_IN_PATHS is a list of paths relative to the top of the tree
-module_path_patterns := $(foreach p, $(BUILD_MODULES_IN_PATHS),\
+build_modules_in_paths := $(patsubst ./%,%,$(BUILD_MODULES_IN_PATHS))
+module_path_patterns := $(foreach p, $(build_modules_in_paths),\
     $(if $(filter %/,$(p)),$(p)%,$(p)/%))
 my_all_modules := $(sort $(foreach m, $(ALL_MODULES),$(if $(filter\
     $(module_path_patterns), $(addsuffix /,$(ALL_MODULES.$(m).PATH))),$(m))))
@@ -882,7 +917,8 @@
 	$(INSTALLED_USERDATAIMAGE_TARGET) \
 	$(INSTALLED_CACHEIMAGE_TARGET) \
 	$(INSTALLED_VENDORIMAGE_TARGET) \
-	$(INSTALLED_FILES_FILE)
+	$(INSTALLED_FILES_FILE) \
+	$(INSTALLED_FILES_FILE_VENDOR)
 
 # dist_files only for putting your library into the dist directory with a full build.
 .PHONY: dist_files
@@ -924,7 +960,7 @@
 .PHONY: apps_only
 apps_only: $(unbundled_build_modules)
 
-droid: apps_only
+droid_targets: apps_only
 
 # Combine the NOTICE files for a apps_only build
 $(eval $(call combine-notice-files, \
@@ -942,6 +978,7 @@
     $(BUILT_OTATOOLS_PACKAGE) \
     $(SYMBOLS_ZIP) \
     $(INSTALLED_FILES_FILE) \
+    $(INSTALLED_FILES_FILE_VENDOR) \
     $(INSTALLED_BUILD_PROP_TARGET) \
     $(BUILT_TARGET_FILES_PACKAGE) \
     $(INSTALLED_ANDROID_INFO_TXT_TARGET) \
@@ -969,7 +1006,7 @@
   endif
 
 # Building a full system-- the default is to build droidcore
-droid: droidcore dist_files
+droid_targets: droidcore dist_files
 
 endif # TARGET_BUILD_APPS
 
@@ -1001,13 +1038,13 @@
 tests : host-tests target-tests
 
 # To catch more build breakage, check build tests modules in eng and userdebug builds.
+ifneq ($(ANDROID_NO_TEST_CHECK),true)
 ifneq ($(TARGET_BUILD_PDK),true)
 ifneq ($(filter eng userdebug,$(TARGET_BUILD_VARIANT)),)
 droidcore : target-tests host-tests
 endif
 endif
-
-.PHONY: lintall
+endif
 
 ifneq (,$(filter samplecode, $(MAKECMDGOALS)))
 .PHONY: samplecode
@@ -1052,3 +1089,4 @@
 .PHONY: nothing
 nothing:
 	@echo Successfully read the makefiles.
+endif # !relaunch_with_ninja
diff --git a/core/module_arch_supported.mk b/core/module_arch_supported.mk
index a5e4a7c..9f05060 100644
--- a/core/module_arch_supported.mk
+++ b/core/module_arch_supported.mk
@@ -8,6 +8,8 @@
 ## LOCAL_MODULE_$(my_prefix)ARCH_WARN
 ## LOCAL_MODULE_UNSUPPORTED_$(my_prefix)ARCH
 ## LOCAL_MODULE_UNSUPPORTED_$(my_prefix)ARCH_WARN
+## LOCAL_IS_HOST_MODULE
+## LOCAL_MODULE_HOST_OS
 ##
 ## Inputs from build system:
 ## $(my_prefix)IS_64_BIT
@@ -58,3 +60,14 @@
 my_module_arch_supported := false
 $(warning $(LOCAL_MODULE): architecture $($(my_prefix)$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH) unsupported)
 endif
+
+ifdef LOCAL_IS_HOST_MODULE
+ifneq (,$(LOCAL_MODULE_HOST_OS))
+  ifeq (,$(filter $($(my_prefix)OS),$(LOCAL_MODULE_HOST_OS)))
+    my_module_arch_supported := false
+  endif
+else ifeq ($($(my_prefix)OS),windows)
+  # If LOCAL_MODULE_HOST_OS is empty, only linux and darwin are supported
+  my_module_arch_supported := false
+endif
+endif
diff --git a/core/native_benchmark.mk b/core/native_benchmark.mk
index 431e40a..e5ca451 100644
--- a/core/native_benchmark.mk
+++ b/core/native_benchmark.mk
@@ -3,7 +3,7 @@
 ## Common flags for native benchmarks are added.
 ###########################################
 
-LOCAL_STATIC_LIBRARIES += libbenchmark
+LOCAL_STATIC_LIBRARIES += libbenchmark libbase
 
 ifndef LOCAL_MODULE_PATH
 LOCAL_MODULE_PATH := $(TARGET_OUT_DATA_NATIVE_TESTS)/$(LOCAL_MODULE)
diff --git a/core/ninja.mk b/core/ninja.mk
new file mode 100644
index 0000000..862ed80
--- /dev/null
+++ b/core/ninja.mk
@@ -0,0 +1,160 @@
+KATI ?= $(HOST_OUT_EXECUTABLES)/ckati
+MAKEPARALLEL ?= $(HOST_OUT_EXECUTABLES)/makeparallel
+NINJA ?= prebuilts/ninja/$(HOST_PREBUILT_TAG)/ninja
+
+KATI_OUTPUT_PATTERNS := $(OUT_DIR)/build%.ninja $(OUT_DIR)/ninja%.sh
+
+# Modifier goals we don't need to pass to Ninja.
+NINJA_EXCLUDE_GOALS := showcommands all dist
+.PHONY : $(NINJA_EXCLUDE_GOALS)
+
+# A list of goals which affect parsing of makefiles and we need to pass to Kati.
+PARSE_TIME_MAKE_GOALS := \
+	$(PARSE_TIME_MAKE_GOALS) \
+	$(dont_bother_goals) \
+	all \
+	APP-% \
+	DUMP_% \
+	ECLIPSE-% \
+	PRODUCT-% \
+	boottarball-nodeps \
+	btnod \
+	build-art% \
+	build_kernel-nodeps \
+	clean-oat% \
+	continuous_instrumentation_tests \
+	continuous_native_tests \
+	cts \
+	custom_images \
+	deps-license \
+	dicttool_aosp \
+	dist \
+	dump-products \
+	dumpvar-% \
+	eng \
+	fusion \
+	oem_image \
+	online-system-api-sdk-docs \
+	pdk \
+	platform \
+	platform-java \
+	product-graph \
+	samplecode \
+	sdk \
+	sdk_addon \
+	sdk_repo \
+	snod \
+	stnod \
+	systemimage-nodeps \
+	systemtarball-nodeps \
+	target-files-package \
+	test-art% \
+	user \
+	userdataimage \
+	userdebug \
+	valgrind-test-art% \
+	win_sdk \
+	winsdk-tools
+
+-include vendor/google/build/ninja_config.mk
+
+# Any Android goals that need to be built.
+ANDROID_GOALS := $(filter-out $(KATI_OUTPUT_PATTERNS) $(KATI) $(MAKEPARALLEL),\
+    $(sort $(ORIGINAL_MAKECMDGOALS) $(MAKECMDGOALS)))
+# Goals we need to pass to Ninja.
+NINJA_GOALS := $(filter-out $(NINJA_EXCLUDE_GOALS), $(ANDROID_GOALS))
+# Goals we need to pass to Kati.
+KATI_GOALS := $(filter $(PARSE_TIME_MAKE_GOALS),  $(ANDROID_GOALS))
+
+define replace_space_and_slash
+$(subst /,_,$(subst $(space),_,$(sort $1)))
+endef
+
+KATI_NINJA_SUFFIX := -$(TARGET_PRODUCT)
+ifneq ($(KATI_GOALS),)
+KATI_NINJA_SUFFIX := $(KATI_NINJA_SUFFIX)-$(call replace_space_and_slash,$(KATI_GOALS))
+endif
+ifneq ($(ONE_SHOT_MAKEFILE),)
+KATI_NINJA_SUFFIX := $(KATI_NINJA_SUFFIX)-mmm-$(call replace_space_and_slash,$(ONE_SHOT_MAKEFILE))
+endif
+ifneq ($(BUILD_MODULES_IN_PATHS),)
+KATI_NINJA_SUFFIX := $(KATI_NINJA_SUFFIX)-mmma-$(call replace_space_and_slash,$(BUILD_MODULES_IN_PATHS))
+endif
+
+my_checksum_suffix :=
+my_ninja_suffix_too_long := $(filter 1, $(shell v='$(KATI_NINJA_SUFFIX)' && echo $$(($${$(pound)v} > 64))))
+ifneq ($(my_ninja_suffix_too_long),)
+# Replace the suffix with a checksum if it gets too long.
+my_checksum_suffix := $(KATI_NINJA_SUFFIX)
+KATI_NINJA_SUFFIX := -$(word 1, $(shell echo $(my_checksum_suffix) | $(MD5SUM)))
+endif
+
+KATI_BUILD_NINJA := $(OUT_DIR)/build$(KATI_NINJA_SUFFIX).ninja
+KATI_ENV_SH := $(OUT_DIR)/env$(KATI_NINJA_SUFFIX).sh
+
+# Write out a file mapping checksum to the real suffix.
+ifneq ($(my_checksum_suffix),)
+my_ninja_suffix_file := $(basename $(KATI_BUILD_NINJA)).suf
+$(shell mkdir -p $(dir $(my_ninja_suffix_file)) && \
+    echo $(my_checksum_suffix) > $(my_ninja_suffix_file))
+endif
+
+ifeq (,$(NINJA_STATUS))
+NINJA_STATUS := [%p %s/%t]$(space)
+endif
+
+ifneq (,$(filter showcommands,$(ORIGINAL_MAKECMDGOALS)))
+NINJA_ARGS += "-v"
+endif
+
+ifdef USE_GOMA
+KATI_MAKEPARALLEL := $(MAKEPARALLEL)
+# Ninja runs remote jobs (i.e., commands which contain gomacc) with
+# this parallelism. Note the parallelism of all other jobs is still
+# limited by the -j flag passed to GNU make.
+NINJA_REMOTE_NUM_JOBS ?= 500
+NINJA_ARGS += -j$(NINJA_REMOTE_NUM_JOBS)
+else
+NINJA_MAKEPARALLEL := $(MAKEPARALLEL) --ninja
+endif
+
+$(sort $(DEFAULT_GOAL) $(ANDROID_GOALS)) : ninja_wrapper
+	@#empty
+
+.PHONY: ninja_wrapper
+ninja_wrapper: $(KATI_BUILD_NINJA) $(MAKEPARALLEL)
+	@echo Starting build with ninja
+	+$(hide) export NINJA_STATUS="$(NINJA_STATUS)" && source $(KATI_ENV_SH) && $(NINJA_MAKEPARALLEL) $(NINJA) $(NINJA_GOALS) -C $(TOP) -f $(KATI_BUILD_NINJA) $(NINJA_ARGS)
+
+KATI_FIND_EMULATOR := --use_find_emulator
+ifeq ($(KATI_EMULATE_FIND),false)
+  KATI_FIND_EMULATOR :=
+endif
+$(KATI_BUILD_NINJA): $(KATI) $(MAKEPARALLEL) FORCE
+	@echo Running kati to generate build$(KATI_NINJA_SUFFIX).ninja...
+	+$(hide) $(KATI_MAKEPARALLEL) $(KATI) --ninja --ninja_dir=$(OUT_DIR) --ninja_suffix=$(KATI_NINJA_SUFFIX) --regen --ignore_dirty=$(OUT_DIR)/% --ignore_optional_include=$(OUT_DIR)/%.P --detect_android_echo $(KATI_FIND_EMULATOR) -f build/core/main.mk $(KATI_GOALS) --gen_all_targets BUILDING_WITH_NINJA=true
+
+KATI_CXX := $(CLANG_CXX) $(CLANG_HOST_GLOBAL_CFLAGS) $(CLANG_HOST_GLOBAL_CPPFLAGS)
+KATI_LD := $(CLANG_CXX) $(CLANG_HOST_GLOBAL_LDFLAGS)
+# Build static ckati. Unfortunately Mac OS X doesn't officially support static exectuables.
+ifeq ($(BUILD_OS),linux)
+KATI_LD += -static
+endif
+
+KATI_INTERMEDIATES_PATH := $(HOST_OUT_INTERMEDIATES)/EXECUTABLES/ckati_intermediates
+KATI_BIN_PATH := $(HOST_OUT_EXECUTABLES)
+include build/kati/Makefile.ckati
+
+MAKEPARALLEL_CXX := $(CLANG_CXX) $(CLANG_HOST_GLOBAL_CFLAGS) $(CLANG_HOST_GLOBAL_CPPFLAGS)
+MAKEPARALLEL_LD := $(CLANG_CXX) $(CLANG_HOST_GLOBAL_LDFLAGS)
+# Build static makeparallel. Unfortunately Mac OS X doesn't officially support static exectuables.
+ifeq ($(BUILD_OS),linux)
+MAKEPARALLEL_LD += -static
+endif
+
+MAKEPARALLEL_INTERMEDIATES_PATH := $(HOST_OUT_INTERMEDIATES)/EXECUTABLES/makeparallel_intermediates
+MAKEPARALLEL_BIN_PATH := $(HOST_OUT_EXECUTABLES)
+include build/tools/makeparallel/Makefile
+
+.PHONY: FORCE
+FORCE:
diff --git a/core/notice_files.mk b/core/notice_files.mk
index 43a5435..cf2dad6 100644
--- a/core/notice_files.mk
+++ b/core/notice_files.mk
@@ -14,6 +14,7 @@
 # so my_prefix is not set at this point.
 ifeq ($(LOCAL_IS_HOST_MODULE),true)
   my_prefix := HOST_
+  LOCAL_HOST_PREFIX :=
 else
   my_prefix := TARGET_
 endif
@@ -56,6 +57,7 @@
 
 # In case it's actually a host file
 module_installed_filename := $(patsubst $(HOST_OUT)%,%,$(module_installed_filename))
+module_installed_filename := $(patsubst $(HOST_CROSS_OUT)%,%,$(module_installed_filename))
 
 installed_notice_file := $($(my_prefix)OUT_NOTICE_FILES)/src/$(module_installed_filename).txt
 
diff --git a/core/package_internal.mk b/core/package_internal.mk
index 23648c1..cb77e76 100644
--- a/core/package_internal.mk
+++ b/core/package_internal.mk
@@ -176,7 +176,7 @@
 ifeq (true,$(EMMA_INSTRUMENT))
 ifndef LOCAL_EMMA_INSTRUMENT
 # No emma for test apks.
-ifeq (,$(filer tests,$(LOCAL_MODULE_TAGS))$(LOCAL_INSTRUMENTATION_FOR))
+ifeq (,$(LOCAL_INSTRUMENTATION_FOR))
 LOCAL_EMMA_INSTRUMENT := true
 endif # No test apk
 endif # LOCAL_EMMA_INSTRUMENT is not set
@@ -241,7 +241,7 @@
 $(R_file_stamp): PRIVATE_PROGUARD_OPTIONS_FILE := $(proguard_options_file)
 $(R_file_stamp): $(all_res_assets) $(full_android_manifest) $(RenderScript_file_stamp) $(AAPT) | $(ACP)
 	@echo "target R.java/Manifest.java: $(PRIVATE_MODULE) ($@)"
-	@rm -f $@
+	@rm -rf $@ && mkdir -p $(dir $@)
 	$(create-resource-java-files)
 	$(hide) for GENERATED_MANIFEST_FILE in `find $(PRIVATE_SOURCE_INTERMEDIATES_DIR) \
 					-name Manifest.java 2> /dev/null`; do \
@@ -256,7 +256,10 @@
 		$(ACP) -fp $$GENERATED_R_FILE $(TARGET_COMMON_OUT_ROOT)/R/$$dir \
 			|| exit 31; \
 		$(ACP) -fp $$GENERATED_R_FILE $@ || exit 32; \
-	done; \
+	done;
+	@# Ensure that the target file is always created, i.e. also in case we did not
+	@# enter the GENERATED_R_FILE-loop above. This avoids unnecessary rebuilding.
+	$(hide) touch $@
 
 $(proguard_options_file): $(R_file_stamp)
 
@@ -509,39 +512,6 @@
 
 PACKAGES := $(PACKAGES) $(LOCAL_PACKAGE_NAME)
 
-# Dist the files that can be bundled in system.img.
-# They include the jni shared libraries and the apk with jni libraries stripped.
-ifeq ($(LOCAL_DIST_BUNDLED_BINARIES),true)
-ifneq ($(filter $(LOCAL_PACKAGE_NAME),$(TARGET_BUILD_APPS)),)
-ifneq ($(strip $(jni_shared_libraries)),)
-dist_subdir := bundled_$(LOCAL_PACKAGE_NAME)
-$(foreach f, $(jni_shared_libraries), \
-  $(call dist-for-goals, apps_only, $(f):$(dist_subdir)/$(notdir $(f))))
-
-apk_jni_stripped := $(intermediates)/jni_stripped/package.apk
-$(apk_jni_stripped): PRIVATE_JNI_SHARED_LIBRARIES := $(notdir $(jni_shared_libraries))
-$(apk_jni_stripped) : $(LOCAL_BUILT_MODULE) | $(ZIPALIGN)
-	@rm -rf $(dir $@) && mkdir -p $(dir $@)
-	$(hide) cp $< $@
-	$(hide) zip -d $@ $(foreach f,$(PRIVATE_JNI_SHARED_LIBRARIES),\*/$(f))
-	$(align-package)
-
-$(call dist-for-goals, apps_only, $(apk_jni_stripped):$(dist_subdir)/$(LOCAL_PACKAGE_NAME).apk)
-
-endif  # jni_shared_libraries
-endif  # apps_only build
-endif  # LOCAL_DIST_BUNDLED_BINARIES
-
-# Lint phony targets
-.PHONY: lint-$(LOCAL_PACKAGE_NAME)
-lint-$(LOCAL_PACKAGE_NAME): PRIVATE_PATH := $(LOCAL_PATH)
-lint-$(LOCAL_PACKAGE_NAME): PRIVATE_LINT_FLAGS := $(LOCAL_LINT_FLAGS)
-lint-$(LOCAL_PACKAGE_NAME) :
-	@echo lint $(PRIVATE_PATH)
-	$(LINT) $(PRIVATE_LINT_FLAGS) $(PRIVATE_PATH)
-
-lintall : lint-$(LOCAL_PACKAGE_NAME)
-
 endif # skip_definition
 
 # Reset internal variables.
diff --git a/core/pathmap.mk b/core/pathmap.mk
index b300ff5..495f1a5 100644
--- a/core/pathmap.mk
+++ b/core/pathmap.mk
@@ -16,7 +16,14 @@
 
 #
 # A central place to define mappings to paths, to avoid hard-coding
-# them in Android.mk files.
+# them in Android.mk files. Not meant for header file include directories,
+# despite the fact that it was historically used for that!
+#
+# If you want this for a library's header files, use LOCAL_EXPORT_C_INCLUDES
+# instead. Then users of the library don't have to do anything --- they'll
+# have the correct header files added to their include path automatically.
+#
+
 #
 # TODO: Allow each project to define stuff like this before the per-module
 #       Android.mk files are included, so we don't need to have a big central
@@ -30,16 +37,9 @@
     camera:system/media/camera/include \
     frameworks-base:frameworks/base/include \
     frameworks-native:frameworks/native/include \
-    libc:bionic/libc/include \
     libhardware:hardware/libhardware/include \
     libhardware_legacy:hardware/libhardware_legacy/include \
-    libhost:build/libs/host/include \
-    libm:bionic/libm/include \
-    libnativehelper:libnativehelper/include \
-    libpagemap:system/extras/libpagemap/include \
     libril:hardware/ril/include \
-    libstdc++:bionic/libstdc++/include \
-    mkbootimg:system/core/mkbootimg \
     opengl-tests-includes:frameworks/native/opengl/tests/include \
     recovery:bootable/recovery \
     system-core:system/core/include \
@@ -67,7 +67,7 @@
 # Many modules expect to be able to say "#include <jni.h>",
 # so make it easy for them to find the correct path.
 #
-JNI_H_INCLUDE := $(call include-path-for,libnativehelper)/nativehelper
+JNI_H_INCLUDE := libnativehelper/include/nativehelper
 
 #
 # A list of all source roots under frameworks/base, which will be
diff --git a/core/pdk_config.mk b/core/pdk_config.mk
index 262b50e..3397d9c 100644
--- a/core/pdk_config.mk
+++ b/core/pdk_config.mk
@@ -21,11 +21,11 @@
 # Most PDK project paths should be using vendor/pdk/TARGET_DEVICE
 # but some legacy ones (e.g. mini_armv7a_neon generic PDK) were setup
 # with vendor/pdk/TARGET_PRODUCT.
-_pdk_fusion_default_platform_zip = $(wildcard \
-vendor/pdk/$(TARGET_DEVICE)/$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)/platform/platform.zip \
-vendor/pdk/$(TARGET_DEVICE)/$(patsubst aosp_%,full_%,$(TARGET_PRODUCT))-$(TARGET_BUILD_VARIANT)/platform/platform.zip \
-vendor/pdk/$(TARGET_PRODUCT)/$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)/platform/platform.zip \
-vendor/pdk/$(TARGET_PRODUCT)/$(patsubst aosp_%,full_%,$(TARGET_PRODUCT))-$(TARGET_BUILD_VARIANT)/platform/platform.zip)
+_pdk_fusion_default_platform_zip = $(strip \
+  $(wildcard vendor/pdk/$(TARGET_DEVICE)/$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)/platform/platform.zip) \
+  $(wildcard vendor/pdk/$(TARGET_DEVICE)/$(patsubst aosp_%,full_%,$(TARGET_PRODUCT))-$(TARGET_BUILD_VARIANT)/platform/platform.zip) \
+  $(wildcard vendor/pdk/$(TARGET_PRODUCT)/$(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)/platform/platform.zip) \
+  $(wildcard vendor/pdk/$(TARGET_PRODUCT)/$(patsubst aosp_%,full_%,$(TARGET_PRODUCT))-$(TARGET_BUILD_VARIANT)/platform/platform.zip))
 ifneq (,$(_pdk_fusion_default_platform_zip))
 PDK_FUSION_PLATFORM_ZIP := $(word 1, $(_pdk_fusion_default_platform_zip))
 TARGET_BUILD_PDK := true
diff --git a/core/phony_package.mk b/core/phony_package.mk
index 30e198c..866b13c 100644
--- a/core/phony_package.mk
+++ b/core/phony_package.mk
@@ -7,7 +7,7 @@
 
 include $(BUILD_SYSTEM)/base_rules.mk
 
-$(LOCAL_BUILT_MODULE): $(LOCAL_MODULE_MAKEFILE) $(LOCAL_ADDITIONAL_DEPENDENCIES)
+$(LOCAL_BUILT_MODULE): $(LOCAL_MODULE_MAKEFILE_DEP) $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(hide) echo "Fake: $@"
 	$(hide) mkdir -p $(dir $@)
 	$(hide) touch $@
diff --git a/core/post_clean.mk b/core/post_clean.mk
index 0273ff2..7fafe4a 100644
--- a/core/post_clean.mk
+++ b/core/post_clean.mk
@@ -88,7 +88,7 @@
 $(shell echo 'MODULES_WITH_AIDL_FILES := $(MODULES_WITH_AIDL_FILES)' >> $(current_aidl_config))
 
 # Now current becomes previous.
-$(shell mv -f $(current_aidl_config) $(previous_aidl_config))
+$(shell cmp $(current_aidl_config) $(previous_aidl_config) > /dev/null 2>&1 || mv -f $(current_aidl_config) $(previous_aidl_config))
 
 MODULES_WITH_AIDL_FILES :=
 modules_with_aidl_files :=
diff --git a/core/prebuilt.mk b/core/prebuilt.mk
index d3f9d1a..ed25f71 100644
--- a/core/prebuilt.mk
+++ b/core/prebuilt.mk
@@ -8,6 +8,7 @@
 
 ifdef LOCAL_IS_HOST_MODULE
   my_prefix := HOST_
+  LOCAL_HOST_PREFIX :=
 else
   my_prefix := TARGET_
 endif
@@ -52,4 +53,26 @@
 
 LOCAL_2ND_ARCH_VAR_PREFIX :=
 
+ifdef LOCAL_IS_HOST_MODULE
+ifdef HOST_CROSS_OS
+ifneq (,$(filter EXECUTABLES STATIC_LIBRARIES SHARED_LIBRARIES,$(LOCAL_MODULE_CLASS)))
+my_prefix := HOST_CROSS_
+LOCAL_HOST_PREFIX := $(my_prefix)
+include $(BUILD_SYSTEM)/module_arch_supported.mk
+ifeq ($(my_module_arch_supported),true)
+# host cross compilation is supported
+OVERRIDE_BUILT_MODULE_PATH :=
+LOCAL_BUILT_MODULE :=
+LOCAL_INSTALLED_MODULE :=
+LOCAL_MODULE_STEM :=
+LOCAL_BUILT_MODULE_STEM :=
+LOCAL_INSTALLED_MODULE_STEM :=
+LOCAL_INTERMEDIATE_TARGETS :=
+include $(BUILD_SYSTEM)/prebuilt_internal.mk
+endif
+LOCAL_HOST_PREFIX :=
+endif
+endif
+endif
+
 my_module_arch_supported :=
diff --git a/core/prebuilt_internal.mk b/core/prebuilt_internal.mk
index 0406353..da76eb9 100644
--- a/core/prebuilt_internal.mk
+++ b/core/prebuilt_internal.mk
@@ -48,6 +48,10 @@
     # Do not pack relocations by default
     LOCAL_PACK_MODULE_RELOCATIONS := false
   endif
+
+  ifeq ($(DISABLE_RELOCATION_PACKER),true)
+    LOCAL_PACK_MODULE_RELOCATIONS := false
+  endif
 endif
 
 ifneq ($(filter STATIC_LIBRARIES SHARED_LIBRARIES,$(LOCAL_MODULE_CLASS)),)
@@ -88,7 +92,7 @@
 ifdef prebuilt_module_is_a_library
 export_includes := $(intermediates)/export_includes
 $(export_includes): PRIVATE_EXPORT_C_INCLUDE_DIRS := $(LOCAL_EXPORT_C_INCLUDE_DIRS)
-$(export_includes) : $(LOCAL_MODULE_MAKEFILE)
+$(export_includes) : $(LOCAL_MODULE_MAKEFILE_DEP)
 	@echo Export includes file: $< -- $@
 	$(hide) mkdir -p $(dir $@) && rm -f $@
 ifdef LOCAL_EXPORT_C_INCLUDE_DIRS
@@ -271,8 +275,13 @@
 $(built_module) : $(my_prebuilt_src_file)
 	$(transform-prebuilt-to-target-strip-comments)
 else
+ifneq ($(LOCAL_ACP_UNAVAILABLE),true)
 $(built_module) : $(my_prebuilt_src_file) | $(ACP)
 	$(transform-prebuilt-to-target)
+else
+$(built_module) : $(my_prebuilt_src_file)
+	$(copy-file-to-target-with-cp)
+endif
 endif
 endif # LOCAL_MODULE_CLASS != APPS
 
@@ -312,12 +321,12 @@
 
 ifeq ($(LOCAL_MODULE_CLASS),JAVA_LIBRARIES)
 $(intermediates.COMMON)/classes.jack : PRIVATE_JILL_FLAGS:=$(LOCAL_JILL_FLAGS)
-$(intermediates.COMMON)/classes.jack : $(my_src_jar) $(LOCAL_MODULE_MAKEFILE) \
-        $(LOCAL_ADDITIONAL_DEPENDENCIES) $(JILL_JAR) $(JACK_JAR) $(JACK_LAUNCHER_JAR)
+$(intermediates.COMMON)/classes.jack : $(my_src_jar) $(LOCAL_MODULE_MAKEFILE_DEP) \
+        $(LOCAL_ADDITIONAL_DEPENDENCIES) $(JILL_JAR) $(JACK)
 	$(transform-jar-to-jack)
 
 endif # JAVA_LIBRARIES
 
-$(built_module) : $(LOCAL_MODULE_MAKEFILE) $(LOCAL_ADDITIONAL_DEPENDENCIES)
+$(built_module) : $(LOCAL_MODULE_MAKEFILE_DEP) $(LOCAL_ADDITIONAL_DEPENDENCIES)
 
 my_prebuilt_src_file :=
diff --git a/core/tasks/product-graph.mk b/core/product-graph.mk
similarity index 98%
rename from core/tasks/product-graph.mk
rename to core/product-graph.mk
index db2cf71..36e9037 100644
--- a/core/tasks/product-graph.mk
+++ b/core/product-graph.mk
@@ -34,7 +34,7 @@
 endef
 
 
-this_makefile := build/core/tasks/product-graph.mk
+this_makefile := build/core/product-graph.mk
 
 products_svg := $(OUT_DIR)/products.svg
 products_pdf := $(OUT_DIR)/products.pdf
diff --git a/core/product.mk b/core/product.mk
index e97cba4..4d35704 100644
--- a/core/product.mk
+++ b/core/product.mk
@@ -28,8 +28,9 @@
 # $(call ) isn't necessary.
 #
 define _find-android-products-files
-$(shell test -d device && find device -maxdepth 6 -name AndroidProducts.mk) \
-  $(shell test -d vendor && find vendor -maxdepth 6 -name AndroidProducts.mk) \
+$(sort $(shell test -d device && find -L device -maxdepth 6 -name AndroidProducts.mk)) \
+  $(sort $(shell test -d vendor && find -L vendor -maxdepth 6 -name AndroidProducts.mk)) \
+  $(sort $(shell test -d product && find -L product -maxdepth 6 -name AndroidProducts.mk)) \
   $(SRC_TARGET_DIR)/product/AndroidProducts.mk
 endef
 
@@ -100,6 +101,7 @@
     PRODUCT_SUPPORTS_BOOT_SIGNER \
     PRODUCT_SUPPORTS_VBOOT \
     PRODUCT_SUPPORTS_VERITY \
+    PRODUCT_SUPPORTS_VERITY_FEC \
     PRODUCT_OEM_PROPERTIES \
     PRODUCT_SYSTEM_PROPERTY_BLACKLIST \
     PRODUCT_SYSTEM_SERVER_JARS \
@@ -133,11 +135,14 @@
 #  3. Records that we've visited this node, in ALL_PRODUCTS
 #
 define inherit-product
+  $(if $(findstring ../,$(1)),\
+    $(eval np := $(call normalize-paths,$(1))),\
+    $(eval np := $(strip $(1))))\
   $(foreach v,$(_product_var_list), \
-      $(eval $(v) := $($(v)) $(INHERIT_TAG)$(strip $(1)))) \
+      $(eval $(v) := $($(v)) $(INHERIT_TAG)$(np))) \
   $(eval inherit_var := \
       PRODUCTS.$(strip $(word 1,$(_include_stack))).INHERITS_FROM) \
-  $(eval $(inherit_var) := $(sort $($(inherit_var)) $(strip $(1)))) \
+  $(eval $(inherit_var) := $(sort $($(inherit_var)) $(np))) \
   $(eval inherit_var:=) \
   $(eval ALL_PRODUCTS := $(sort $(ALL_PRODUCTS) $(word 1,$(_include_stack))))
 endef
@@ -238,7 +243,6 @@
 	TARGET_NO_RECOVERY \
 	TARGET_NO_RADIOIMAGE \
 	TARGET_HARDWARE_3D \
-	TARGET_PROVIDES_INIT_RC \
 	TARGET_CPU_ABI \
 	TARGET_CPU_ABI2 \
 
@@ -274,6 +278,7 @@
 _product_stash_var_list += \
 	GLOBAL_CFLAGS_NO_OVERRIDE \
 	GLOBAL_CPPFLAGS_NO_OVERRIDE \
+	GLOBAL_CLANG_CFLAGS_NO_OVERRIDE \
 
 #
 # Stash values of the variables in _product_stash_var_list.
diff --git a/core/product_config.mk b/core/product_config.mk
index 94449c2..6aefa8d 100644
--- a/core/product_config.mk
+++ b/core/product_config.mk
@@ -213,7 +213,19 @@
 current_product_makefile := $(strip $(current_product_makefile))
 all_product_makefiles := $(strip $(all_product_makefiles))
 
-ifneq (,$(filter product-graph dump-products, $(MAKECMDGOALS)))
+load_all_product_makefiles :=
+ifneq (,$(filter product-graph, $(MAKECMDGOALS)))
+ifeq ($(ANDROID_PRODUCT_GRAPH),--all)
+load_all_product_makefiles := true
+endif
+endif
+ifneq (,$(filter dump-products,$(MAKECMDGOALS)))
+ifeq ($(ANDROID_DUMP_PRODUCTS),all)
+load_all_product_makefiles := true
+endif
+endif
+
+ifeq ($(load_all_product_makefiles),true)
 # Import all product makefiles.
 $(call import-products, $(all_product_makefiles))
 else
diff --git a/core/sdk_font.mk b/core/sdk_font.mk
index 204403d..c10f19f 100644
--- a/core/sdk_font.mk
+++ b/core/sdk_font.mk
@@ -18,7 +18,7 @@
 SDK_FONT_TEMP := $(call intermediates-dir-for,PACKAGING,sdk-fonts,HOST,COMMON)
 
 # The font configuration files - system_fonts.xml, fallback_fonts.xml etc.
-sdk_font_config := $(wildcard frameworks/base/data/fonts/*.xml)
+sdk_font_config := $(sort $(wildcard frameworks/base/data/fonts/*.xml))
 sdk_font_config :=  $(addprefix $(SDK_FONT_TEMP)/, $(notdir $(sdk_font_config)))
 
 $(sdk_font_config): $(SDK_FONT_TEMP)/%.xml: \
diff --git a/core/shared_library.mk b/core/shared_library.mk
index 71a3bb2..73aca78c 100644
--- a/core/shared_library.mk
+++ b/core/shared_library.mk
@@ -9,13 +9,13 @@
 ifeq ($(my_module_multilib),both)
 ifneq ($(LOCAL_MODULE_PATH),)
 ifneq ($(TARGET_2ND_ARCH),)
-$(warning $(LOCAL_MODULE): LOCAL_MODULE_PATH for shared libraries is unsupported in multiarch builds, use LOCAL_MODULE_RELATIVE_PATH instead)
+$(error $(LOCAL_MODULE): LOCAL_MODULE_PATH for shared libraries is unsupported in multiarch builds, use LOCAL_MODULE_RELATIVE_PATH instead)
 endif
 endif
 
 ifneq ($(LOCAL_UNSTRIPPED_PATH),)
 ifneq ($(TARGET_2ND_ARCH),)
-$(warning $(LOCAL_MODULE): LOCAL_UNSTRIPPED_PATH for shared libraries is unsupported in multiarch builds)
+$(error $(LOCAL_MODULE): LOCAL_UNSTRIPPED_PATH for shared libraries is unsupported in multiarch builds)
 endif
 endif
 endif # my_module_multilib == both
diff --git a/core/shared_library_internal.mk b/core/shared_library_internal.mk
index e21cf5d..b9a5e3e 100644
--- a/core/shared_library_internal.mk
+++ b/core/shared_library_internal.mk
@@ -40,16 +40,19 @@
 
 # Define PRIVATE_ variables from global vars
 my_target_global_ld_dirs := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_GLOBAL_LD_DIRS)
-my_target_libprofile_rt := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBPROFILE_RT)
-my_target_libgcov := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBGCOV)
 ifeq ($(LOCAL_NO_LIBGCC),true)
 my_target_libgcc :=
 else
 my_target_libgcc := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBGCC)
 endif
 my_target_libatomic := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_LIBATOMIC)
+ifeq ($(LOCAL_NO_CRT),true)
+my_target_crtbegin_so_o :=
+my_target_crtend_so_o :=
+else
 my_target_crtbegin_so_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_CRTBEGIN_SO_O)
 my_target_crtend_so_o := $($(LOCAL_2ND_ARCH_VAR_PREFIX)TARGET_CRTEND_SO_O)
+endif
 ifdef LOCAL_SDK_VERSION
 # Make sure the prebuilt NDK paths are put ahead of the TARGET_GLOBAL_LD_DIRS,
 # so we don't have race condition when the system libraries (such as libc, libstdc++) are also built in the tree.
@@ -63,8 +66,6 @@
 endif
 $(linked_module): PRIVATE_TARGET_GLOBAL_LD_DIRS := $(my_target_global_ld_dirs)
 $(linked_module): PRIVATE_TARGET_GLOBAL_LDFLAGS := $(my_target_global_ldflags)
-$(linked_module): PRIVATE_TARGET_LIBPROFILE_RT := $(my_target_libprofile_rt)
-$(linked_module): PRIVATE_TARGET_LIBGCOV := $(my_target_libgcov)
 $(linked_module): PRIVATE_TARGET_LIBGCC := $(my_target_libgcc)
 $(linked_module): PRIVATE_TARGET_LIBATOMIC := $(my_target_libatomic)
 $(linked_module): PRIVATE_TARGET_CRTBEGIN_SO_O := $(my_target_crtbegin_so_o)
@@ -75,7 +76,7 @@
         $(all_libraries) \
         $(my_target_crtbegin_so_o) \
         $(my_target_crtend_so_o) \
-        $(LOCAL_MODULE_MAKEFILE) \
+        $(LOCAL_MODULE_MAKEFILE_DEP) \
         $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-o-to-shared-lib)
 
diff --git a/core/target_test_internal.mk b/core/target_test_internal.mk
index f8a9f04..4715fe8 100644
--- a/core/target_test_internal.mk
+++ b/core/target_test_internal.mk
@@ -7,9 +7,9 @@
 LOCAL_C_INCLUDES += external/gtest/include
 
 ifndef LOCAL_SDK_VERSION
-LOCAL_STATIC_LIBRARIES += libgtest libgtest_main
+LOCAL_STATIC_LIBRARIES += libgtest_main libgtest
 else
-LOCAL_STATIC_LIBRARIES += libgtest_ndk libgtest_main_ndk
+LOCAL_STATIC_LIBRARIES += libgtest_main_ndk libgtest_ndk
 endif
 
 ifdef LOCAL_MODULE_PATH
diff --git a/core/tasks/cts.mk b/core/tasks/cts.mk
index 56a7f6f..6288ce8 100644
--- a/core/tasks/cts.mk
+++ b/core/tasks/cts.mk
@@ -387,9 +387,8 @@
 $(INTERNAL_CTS_TARGET): TMP_DIR := $(cts_dir)/temp
 $(INTERNAL_CTS_TARGET): $(cts_dir)/all_cts_files_stamp $(DEFAULT_TEST_PLAN)
 	$(hide) echo "Package CTS: $@"
-	$(hide) cd $(dir $@) && zip -rq $(notdir $@) $(PRIVATE_NAME)
+	$(hide) cd $(dir $@) && zip -rqX $(notdir $@) $(PRIVATE_NAME)
 
 .PHONY: cts
 cts: $(INTERNAL_CTS_TARGET) adb
 $(call dist-for-goals,cts,$(INTERNAL_CTS_TARGET))
-
diff --git a/core/tasks/sdk-addon.mk b/core/tasks/sdk-addon.mk
index 5ac9b7d..362b229 100644
--- a/core/tasks/sdk-addon.mk
+++ b/core/tasks/sdk-addon.mk
@@ -111,13 +111,13 @@
 	    $(ACP) -r $$d $(PRIVATE_STAGING_DIR)/docs ;\
 	  done
 	$(hide) mkdir -p $(dir $@)
-	$(hide) ( F=$$(pwd)/$@ ; cd $(PRIVATE_STAGING_DIR)/.. && zip -rq $$F $(notdir $(PRIVATE_STAGING_DIR)) )
+	$(hide) ( F=$$(pwd)/$@ ; cd $(PRIVATE_STAGING_DIR)/.. && zip -rqX $$F $(notdir $(PRIVATE_STAGING_DIR)) )
 
 $(full_target_img): PRIVATE_STAGING_DIR := $(call append-path,$(staging),$(addon_dir_img))/images/$(TARGET_CPU_ABI)
 $(full_target_img): $(full_target) $(addon_img_source_prop)
 	@echo Packaging SDK Addon System-Image: $@
 	$(hide) mkdir -p $(dir $@)
-	$(hide) ( F=$$(pwd)/$@ ; cd $(PRIVATE_STAGING_DIR)/.. && zip -rq $$F $(notdir $(PRIVATE_STAGING_DIR)) )
+	$(hide) ( F=$$(pwd)/$@ ; cd $(PRIVATE_STAGING_DIR)/.. && zip -rqX $$F $(notdir $(PRIVATE_STAGING_DIR)) )
 
 
 .PHONY: sdk_addon
diff --git a/core/tasks/tools/package-modules.mk b/core/tasks/tools/package-modules.mk
index a70e644..24a7608 100644
--- a/core/tasks/tools/package-modules.mk
+++ b/core/tasks/tools/package-modules.mk
@@ -59,4 +59,4 @@
 	$(call copy-tests-in-batch,$(wordlist 1201,9999,$(PRIVATE_COPY_PAIRS)))
 	$(hide) $(foreach f, $(PRIVATE_PICKUP_FILES),\
 	  cp -RfL $(f) $(dir $@);)
-	$(hide) cd $(dir $@) && zip -rq $(notdir $@) *
+	$(hide) cd $(dir $@) && zip -rqX $(notdir $@) *
diff --git a/core/version_defaults.mk b/core/version_defaults.mk
index a67a82e..d035036 100644
--- a/core/version_defaults.mk
+++ b/core/version_defaults.mk
@@ -24,6 +24,7 @@
 #     DEFAULT_APP_TARGET_SDK
 #     BUILD_ID
 #     BUILD_NUMBER
+#     BUILD_DATETIME
 #     SECURITY_PATCH
 #
 
@@ -123,6 +124,18 @@
   BUILD_ID := UNKNOWN
 endif
 
+ifeq "" "$(BUILD_DATETIME)"
+  # Used to reproduce builds by setting the same time. Must be the number
+  # of seconds since the Epoch.
+  BUILD_DATETIME := $(shell date +%s)
+endif
+
+ifneq (,$(findstring Darwin,$(shell uname -sm)))
+DATE := date -r $(BUILD_DATETIME)
+else
+DATE := date -d @$(BUILD_DATETIME)
+endif
+
 ifeq "" "$(BUILD_NUMBER)"
   # BUILD_NUMBER should be set to the source control value that
   # represents the current state of the source code.  E.g., a
@@ -133,5 +146,5 @@
   # If no BUILD_NUMBER is set, create a useful "I am an engineering build
   # from this date/time" value.  Make it start with a non-digit so that
   # anyone trying to parse it as an integer will probably get "0".
-  BUILD_NUMBER := eng.$(USER).$(shell date +%Y%m%d.%H%M%S)
+  BUILD_NUMBER := eng.$(USER).$(shell $(DATE) +%Y%m%d.%H%M%S)
 endif
diff --git a/envsetup.sh b/envsetup.sh
index 6ad3a9e..45f70b3 100644
--- a/envsetup.sh
+++ b/envsetup.sh
@@ -1,25 +1,27 @@
 function hmm() {
 cat <<EOF
 Invoke ". build/envsetup.sh" from your shell to add the following functions to your environment:
-- lunch:   lunch <product_name>-<build_variant>
-- tapas:   tapas [<App1> <App2> ...] [arm|x86|mips|armv5|arm64|x86_64|mips64] [eng|userdebug|user]
-- croot:   Changes directory to the top of the tree.
-- m:       Makes from the top of the tree.
-- mm:      Builds all of the modules in the current directory, but not their dependencies.
-- mmm:     Builds all of the modules in the supplied directories, but not their dependencies.
-           To limit the modules being built use the syntax: mmm dir/:target1,target2.
-- mma:     Builds all of the modules in the current directory, and their dependencies.
-- mmma:    Builds all of the modules in the supplied directories, and their dependencies.
-- cgrep:   Greps on all local C/C++ files.
-- ggrep:   Greps on all local Gradle files.
-- jgrep:   Greps on all local Java files.
-- resgrep: Greps on all local res/*.xml files.
-- mangrep: Greps on all local AndroidManifest.xml files.
-- sepgrep: Greps on all local sepolicy files.
-- sgrep:   Greps on all local source files.
-- godir:   Go to the directory containing a file.
+- lunch:     lunch <product_name>-<build_variant>
+- tapas:     tapas [<App1> <App2> ...] [arm|x86|mips|armv5|arm64|x86_64|mips64] [eng|userdebug|user]
+- croot:     Changes directory to the top of the tree.
+- m:         Makes from the top of the tree.
+- mm:        Builds all of the modules in the current directory, but not their dependencies.
+- mmm:       Builds all of the modules in the supplied directories, but not their dependencies.
+             To limit the modules being built use the syntax: mmm dir/:target1,target2.
+- mma:       Builds all of the modules in the current directory, and their dependencies.
+- mmma:      Builds all of the modules in the supplied directories, and their dependencies.
+- provision: Flash device with all required partitions. Options will be passed on to fastboot.
+- cgrep:     Greps on all local C/C++ files.
+- ggrep:     Greps on all local Gradle files.
+- jgrep:     Greps on all local Java files.
+- resgrep:   Greps on all local res/*.xml files.
+- mangrep:   Greps on all local AndroidManifest.xml files.
+- mgrep:     Greps on all local Makefiles files.
+- sepgrep:   Greps on all local sepolicy files.
+- sgrep:     Greps on all local source files.
+- godir:     Go to the directory containing a file.
 
-Environemnt options:
+Environment options:
 - SANITIZE_HOST: Set to 'true' to use ASAN for all host modules. Note that
                  ASAN_OPTIONS=detect_leaks=0 will be set by default until the
                  build is leak-check clean.
@@ -29,7 +31,7 @@
     T=$(gettop)
     local A
     A=""
-    for i in `cat $T/build/envsetup.sh | sed -n "/^[ \t]*function /s/function \([a-z_]*\).*/\1/p" | sort | uniq`; do
+    for i in `cat $T/build/envsetup.sh | sed -n "/^[[:blank:]]*function /s/function \([a-z_]*\).*/\1/p" | sort | uniq`; do
       A="$A $i"
     done
     echo $A
@@ -160,23 +162,8 @@
         export ANDROID_TOOLCHAIN_2ND_ARCH=$gccprebuiltdir/$toolchaindir2
     fi
 
-    unset ANDROID_KERNEL_TOOLCHAIN_PATH
-    case $ARCH in
-        arm)
-            # Legacy toolchain configuration used for ARM kernel compilation
-            toolchaindir=arm/arm-eabi-$targetgccversion/bin
-            if [ -d "$gccprebuiltdir/$toolchaindir" ]; then
-                 export ARM_EABI_TOOLCHAIN="$gccprebuiltdir/$toolchaindir"
-                 ANDROID_KERNEL_TOOLCHAIN_PATH="$ARM_EABI_TOOLCHAIN":
-            fi
-            ;;
-        *)
-            # No need to set ARM_EABI_TOOLCHAIN for other ARCHs
-            ;;
-    esac
-
     export ANDROID_DEV_SCRIPTS=$T/development/scripts:$T/prebuilts/devtools/tools:$T/external/selinux/prebuilts/bin
-    export ANDROID_BUILD_PATHS=$(get_build_var ANDROID_BUILD_PATHS):$ANDROID_TOOLCHAIN:$ANDROID_TOOLCHAIN_2ND_ARCH:$ANDROID_KERNEL_TOOLCHAIN_PATH$ANDROID_DEV_SCRIPTS:
+    export ANDROID_BUILD_PATHS=$(get_build_var ANDROID_BUILD_PATHS):$ANDROID_TOOLCHAIN:$ANDROID_TOOLCHAIN_2ND_ARCH:$ANDROID_DEV_SCRIPTS:
 
     # If prebuilts/android-emulator/<system>/ exists, prepend it to our PATH
     # to ensure that the corresponding 'emulator' binaries are used.
@@ -197,6 +184,7 @@
     fi
 
     export PATH=$ANDROID_BUILD_PATHS$PATH
+    export PYTHONPATH=$T/development/python-packages:$PYTHONPATH
 
     unset ANDROID_JAVA_TOOLCHAIN
     unset ANDROID_PRE_BUILD_PATHS
@@ -347,7 +335,7 @@
     if [ "x$TARGET_PRODUCT" != x ] ; then
         default_value=$TARGET_PRODUCT
     else
-        default_value=full
+        default_value=aosp_arm
     fi
 
     export TARGET_PRODUCT=
@@ -594,10 +582,10 @@
         return
     fi
 
-    local product=full
+    local product=aosp_arm
     case $arch in
-      x86)    product=full_x86;;
-      mips)   product=full_mips;;
+      x86)    product=aosp_x86;;
+      mips)   product=aosp_mips;;
       armv5)  product=generic_armv5;;
       arm64)  product=aosp_arm64;;
       x86_64) product=aosp_x86_64;;
@@ -764,9 +752,14 @@
                 MAKEFILE="$MAKEFILE $MFILE"
             else
                 case $DIR in
-                  showcommands | snod | dist | incrementaljavac | *=*) ARGS="$ARGS $DIR";;
+                  showcommands | snod | dist | *=*) ARGS="$ARGS $DIR";;
                   GET-INSTALL-PATH) GET_INSTALL_PATH=$DIR;;
-                  *) echo "No Android.mk in $DIR."; return 1;;
+                  *) if [ -d $DIR ]; then
+                         echo "No Android.mk in $DIR.";
+                     else
+                         echo "Couldn't locate the directory $DIR";
+                     fi
+                     return 1;;
                 esac
             fi
         done
@@ -793,7 +786,10 @@
       return 1
     fi
     local MY_PWD=`PWD= /bin/pwd|sed 's:'$T'/::'`
-    $DRV make -C $T -f build/core/main.mk $@ all_modules BUILD_MODULES_IN_PATHS="$MY_PWD"
+    local MODULES_IN_PATHS=MODULES-IN-$MY_PWD
+    # Convert "/" to "-".
+    MODULES_IN_PATHS=${MODULES_IN_PATHS//\//-}
+    $DRV make -C $T -f build/core/main.mk $@ $MODULES_IN_PATHS
   fi
 }
 
@@ -811,23 +807,27 @@
       MY_PWD=`echo $MY_PWD|sed 's:'$T'/::'`
     fi
     local DIR=
-    local MODULE_PATHS=
+    local MODULES_IN_PATHS=
     local ARGS=
     for DIR in $DIRS ; do
       if [ -d $DIR ]; then
-        if [ "$MY_PWD" = "" ]; then
-          MODULE_PATHS="$MODULE_PATHS $DIR"
-        else
-          MODULE_PATHS="$MODULE_PATHS $MY_PWD/$DIR"
+        # Remove the leading ./ and trailing / if any exists.
+        DIR=${DIR#./}
+        DIR=${DIR%/}
+        if [ "$MY_PWD" != "" ]; then
+          DIR=$MY_PWD/$DIR
         fi
+        MODULES_IN_PATHS="$MODULES_IN_PATHS MODULES-IN-$DIR"
       else
         case $DIR in
-          showcommands | snod | dist | incrementaljavac | *=*) ARGS="$ARGS $DIR";;
+          showcommands | snod | dist | *=*) ARGS="$ARGS $DIR";;
           *) echo "Couldn't find directory $DIR"; return 1;;
         esac
       fi
     done
-    $DRV make -C $T -f build/core/main.mk $DASH_ARGS $ARGS all_modules BUILD_MODULES_IN_PATHS="$MODULE_PATHS"
+    # Convert "/" to "-".
+    MODULES_IN_PATHS=${MODULES_IN_PATHS//\//-}
+    $DRV make -C $T -f build/core/main.mk $DASH_ARGS $ARGS $MODULES_IN_PATHS
   else
     echo "Couldn't locate the top of the tree.  Try setting TOP."
     return 1
@@ -920,7 +920,7 @@
 	adb root;
 	adb wait-for-device;
 
-	echo "Remounting root parition read-write...";
+	echo "Remounting root partition read-write...";
 	adb shell mount -w -o remount -t rootfs rootfs;
 	sleep 1;
 	adb wait-for-device;
@@ -1061,14 +1061,16 @@
     Darwin)
         function sgrep()
         {
-            find -E . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.(c|h|cc|cpp|S|java|xml|sh|mk|aidl)' -print0 | xargs -0 grep --color -n "$@"
+            find -E . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.(c|h|cc|cpp|S|java|xml|sh|mk|aidl)' \
+                -exec grep --color -n "$@" {} +
         }
 
         ;;
     *)
         function sgrep()
         {
-            find . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.\(c\|h\|cc\|cpp\|S\|java\|xml\|sh\|mk\|aidl\)' -print0 | xargs -0 grep --color -n "$@"
+            find . -name .repo -prune -o -name .git -prune -o  -type f -iregex '.*\.\(c\|h\|cc\|cpp\|S\|java\|xml\|sh\|mk\|aidl\)' \
+                -exec grep --color -n "$@" {} +
         }
         ;;
 esac
@@ -1080,61 +1082,73 @@
 
 function ggrep()
 {
-    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.gradle" -print0 | xargs -0 grep --color -n "$@"
+    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.gradle" \
+        -exec grep --color -n "$@" {} +
 }
 
 function jgrep()
 {
-    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.java" -print0 | xargs -0 grep --color -n "$@"
+    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.java" \
+        -exec grep --color -n "$@" {} +
 }
 
 function cgrep()
 {
-    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f \( -name '*.c' -o -name '*.cc' -o -name '*.cpp' -o -name '*.h' -o -name '*.hpp' \) -print0 | xargs -0 grep --color -n "$@"
+    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f \( -name '*.c' -o -name '*.cc' -o -name '*.cpp' -o -name '*.h' -o -name '*.hpp' \) \
+        -exec grep --color -n "$@" {} +
 }
 
 function resgrep()
 {
-    for dir in `find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -name res -type d`; do find $dir -type f -name '*\.xml' -print0 | xargs -0 grep --color -n "$@"; done;
+    for dir in `find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -name res -type d`; do
+        find $dir -type f -name '*\.xml' -exec grep --color -n "$@" {} +
+    done
 }
 
 function mangrep()
 {
-    find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'AndroidManifest.xml' -print0 | xargs -0 grep --color -n "$@"
+    find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -name 'AndroidManifest.xml' \
+        -exec grep --color -n "$@" {} +
 }
 
 function sepgrep()
 {
-    find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -name sepolicy -type d -print0 | xargs -0 grep --color -n -r --exclude-dir=\.git "$@"
+    find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -name sepolicy -type d \
+        -exec grep --color -n -r --exclude-dir=\.git "$@" {} +
 }
 
 function rcgrep()
 {
-    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.rc*" -print0 | xargs -0 grep --color -n "$@"
+    find . -name .repo -prune -o -name .git -prune -o -name out -prune -o -type f -name "*\.rc*" \
+        -exec grep --color -n "$@" {} +
 }
 
 case `uname -s` in
     Darwin)
         function mgrep()
         {
-            find -E . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -iregex '.*/(Makefile|Makefile\..*|.*\.make|.*\.mak|.*\.mk)' -print0 | xargs -0 grep --color -n "$@"
+            find -E . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -type f -iregex '.*/(Makefile|Makefile\..*|.*\.make|.*\.mak|.*\.mk)' \
+                -exec grep --color -n "$@" {} +
         }
 
         function treegrep()
         {
-            find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|S|java|xml)' -print0 | xargs -0 grep --color -n -i "$@"
+            find -E . -name .repo -prune -o -name .git -prune -o -type f -iregex '.*\.(c|h|cpp|S|java|xml)' \
+                -exec grep --color -n -i "$@" {} +
         }
 
         ;;
     *)
         function mgrep()
         {
-            find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -regextype posix-egrep -iregex '(.*\/Makefile|.*\/Makefile\..*|.*\.make|.*\.mak|.*\.mk)' -type f -print0 | xargs -0 grep --color -n "$@"
+            find . -name .repo -prune -o -name .git -prune -o -path ./out -prune -o -regextype posix-egrep -iregex '(.*\/Makefile|.*\/Makefile\..*|.*\.make|.*\.mak|.*\.mk)' -type f \
+                -exec grep --color -n "$@" {} +
         }
 
         function treegrep()
         {
-            find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|S|java|xml)' -type f -print0 | xargs -0 grep --color -n -i "$@"
+            find . -name .repo -prune -o -name .git -prune -o -regextype posix-egrep -iregex '.*\.(c|h|cpp|S|java|xml)' -type f \
+                -exec grep --color -n -i "$@" {} +
         }
 
         ;;
@@ -1437,9 +1451,9 @@
     local retval=$?
     if [ $retval -ne 0 ]
     then
-        echo -e "\e[0;31mFAILURE\e[00m"
+        echo $'\E'"[0;31mFAILURE\e[00m"
     else
-        echo -e "\e[0;32mSUCCESS\e[00m"
+        echo $'\E'"[0;32mSUCCESS\e[00m"
     fi
     return $retval
 }
@@ -1461,9 +1475,9 @@
     local secs=$(($tdiff % 60))
     local ncolors=$(tput colors 2>/dev/null)
     if [ -n "$ncolors" ] && [ $ncolors -ge 8 ]; then
-        color_failed="\e[0;31m"
-        color_success="\e[0;32m"
-        color_reset="\e[00m"
+        color_failed=$'\E'"[0;31m"
+        color_success=$'\E'"[0;32m"
+        color_reset=$'\E'"[00m"
     else
         color_failed=""
         color_success=""
@@ -1471,9 +1485,9 @@
     fi
     echo
     if [ $ret -eq 0 ] ; then
-        echo -n -e "${color_success}#### make completed successfully "
+        echo -n "${color_success}#### make completed successfully "
     else
-        echo -n -e "${color_failed}#### make failed to build some targets "
+        echo -n "${color_failed}#### make failed to build some targets "
     fi
     if [ $hours -gt 0 ] ; then
         printf "(%02g:%02g:%02g (hh:mm:ss))" $hours $mins $secs
@@ -1482,11 +1496,40 @@
     elif [ $secs -gt 0 ] ; then
         printf "(%s seconds)" $secs
     fi
-    echo -e " ####${color_reset}"
+    echo " ####${color_reset}"
     echo
     return $ret
 }
 
+function provision()
+{
+    if [ ! "$ANDROID_PRODUCT_OUT" ]; then
+        echo "Couldn't locate output files.  Try running 'lunch' first." >&2
+        return 1
+    fi
+    if [ ! -e "$ANDROID_PRODUCT_OUT/provision-device" ]; then
+        echo "There is no provisioning script for the device." >&2
+        return 1
+    fi
+
+    # Check if user really wants to do this.
+    if [ "$1" = "--no-confirmation" ]; then
+        shift 1
+    else
+        echo "This action will reflash your device."
+        echo ""
+        echo "ALL DATA ON THE DEVICE WILL BE IRREVOCABLY ERASED."
+        echo ""
+        echo -n "Are you sure you want to do this (yes/no)? "
+        read
+        if [[ "${REPLY}" != "yes" ]] ; then
+            echo "Not taking any action. Exiting." >&2
+            return 1
+        fi
+    fi
+    "$ANDROID_PRODUCT_OUT/provision-device" "$@"
+}
+
 if [ "x$SHELL" != "x/bin/bash" ]; then
     case `ps -o command -p $$` in
         *bash*)
@@ -1499,7 +1542,8 @@
 
 # Execute the contents of any vendorsetup.sh files we can find.
 for f in `test -d device && find -L device -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` \
-         `test -d vendor && find -L vendor -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort`
+         `test -d vendor && find -L vendor -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort` \
+         `test -d product && find -L product -maxdepth 4 -name 'vendorsetup.sh' 2> /dev/null | sort`
 do
     echo "including $f"
     . $f
diff --git a/libs/host/Android.mk b/libs/host/Android.mk
index cab878b..7eb3aa1 100644
--- a/libs/host/Android.mk
+++ b/libs/host/Android.mk
@@ -1,28 +1,20 @@
 LOCAL_PATH:= $(call my-dir)
 include $(CLEAR_VARS)
-LOCAL_ADDITIONAL_DEPENDENCIES := $(LOCAL_PATH)/Android.mk
 
 LOCAL_SRC_FILES:= \
     CopyFile.c
 
-ifeq ($(HOST_OS),cygwin)
-LOCAL_CFLAGS += -DWIN32_EXE
-endif
-ifeq ($(HOST_OS),darwin)
-LOCAL_CFLAGS += -DMACOSX_RSRC
-endif
-ifeq ($(HOST_OS),linux)
-endif
+LOCAL_CFLAGS_darwin += -DMACOSX_RSRC
 
 LOCAL_MODULE:= libhost
+LOCAL_MODULE_HOST_OS := darwin linux windows
 LOCAL_C_INCLUDES := $(LOCAL_PATH)/include
+LOCAL_CXX_STL := none
 
 # acp uses libhost, so we can't use
 # acp to install libhost.
 LOCAL_ACP_UNAVAILABLE:= true
 
-LOCAL_ADDRESS_SANITIZER := false
-
 include $(BUILD_HOST_STATIC_LIBRARY)
 
 # Include toolchain prebuilt modules if they exist.
diff --git a/libs/host/CopyFile.c b/libs/host/CopyFile.c
index 855a565..b2a3e7f 100644
--- a/libs/host/CopyFile.c
+++ b/libs/host/CopyFile.c
@@ -24,11 +24,8 @@
 #include <errno.h>
 #include <assert.h>
 
-#ifdef HAVE_MS_C_RUNTIME
-#  define  mkdir(path,mode)   _mkdir(path)
-#endif
-
 #if defined(_WIN32)
+#  define mkdir(path,mode)   _mkdir(path)
 #  define S_ISLNK(s) 0
 #  define lstat stat
 #  ifndef EACCESS   /* seems to be missing from the Mingw headers */
@@ -183,7 +180,7 @@
             DBUG(("---   unable to set perms on '%s' to 0%o: %s\n",
                 dst, pSrcStat->st_mode & ~(S_IFMT), strerror(errno)));
         }
-#ifndef HAVE_MS_C_RUNTIME
+#ifndef _WIN32
         /*
          * Set the owner.
          */
@@ -261,7 +258,7 @@
         /* if "force" is set, try removing the destination file and retry */
         if (options & COPY_FORCE) {
             if (unlink(dst) != 0) {
-#ifdef HAVE_MS_C_RUNTIME
+#ifdef _WIN32
 				/* MSVCRT.DLL unlink will fail with EACCESS if the file is set read-only */
 				/* so try to change its mode, and unlink again                           */
 				if (errno == EACCESS) {
@@ -274,7 +271,7 @@
                 (void) close(srcFd);
                 return -1;
             }
-#ifdef HAVE_MS_C_RUNTIME
+#ifdef _WIN32
         Open_File:
 #endif			
             dstFd = open(dst, O_CREAT | O_TRUNC | O_WRONLY | O_BINARY, 0644);
@@ -546,57 +543,6 @@
         statResult = stat(src, &srcStat);
     statErrno = errno;        /* preserve across .exe attempt */
 
-#ifdef WIN32_EXE
-    /*
-     * Here's the interesting part.  Under Cygwin, if you have a file
-     * called "foo.exe", stat("foo", ...) will succeed, but open("foo", ...)
-     * will fail.  We need to figure out what its name is supposed to be
-     * so we can create the correct destination file.
-     *
-     * If we don't have the "-e" flag set, we want "acp foo bar" to fail,
-     * not automatically find "foo.exe".  That way, if we really were
-     * trying to copy "foo", it doesn't grab something we don't want.
-     */
-    if (isCmdLine && statResult == 0) {
-        int tmpFd;
-        tmpFd = open(src, O_RDONLY | O_BINARY, 0);
-        if (tmpFd < 0) {
-            statResult = -1;
-            statErrno = ENOENT;
-        } else {
-            (void) close(tmpFd);
-        }
-    }
-
-    /*
-     * If we didn't find the file, try it again with ".exe".
-     */
-    if (isCmdLine && statResult < 0 && statErrno == ENOENT && (options & COPY_TRY_EXE)) {
-        srcExe = malloc(strlen(src) + 4 +1);
-        strcpy(srcExe, src);
-        strcat(srcExe, ".exe");
-
-        if (options & COPY_NO_DEREFERENCE)
-            statResult = lstat(srcExe, &srcStat);
-        else
-            statResult = stat(srcExe, &srcStat);
-
-        if (statResult == 0 && !S_ISREG(srcStat.st_mode))
-            statResult = -1;        /* fail, use original statErrno below */
-
-        if (statResult == 0) {
-            /* found a .exe, copy that instead */
-            dstExe = malloc(strlen(dst) + 4 +1);
-            strcpy(dstExe, dst);
-            strcat(dstExe, ".exe");
-
-            src = srcExe;
-            dst = dstExe;
-        } else {
-            DBUG(("---  couldn't find '%s' either\n", srcExe));
-        }
-    }
-#endif
     if (statResult < 0) {
         if (statErrno == ENOENT)
             fprintf(stderr, "acp: file '%s' does not exist\n", src);
diff --git a/libs/host/include/host/Directories.h b/libs/host/include/host/Directories.h
deleted file mode 100644
index fccce46..0000000
--- a/libs/host/include/host/Directories.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef HOST_MKDIRS_H
-#define HOST_MKDIRS_H
-
-#include <string>
-
-std::string parent_dir(const std::string& path);
-
-extern "C" int mkdirs(const char* path);
-
-#endif // HOST_MKDIRS_H
diff --git a/target/board/generic/BoardConfig.mk b/target/board/generic/BoardConfig.mk
index 4e5504e..b1cefca 100644
--- a/target/board/generic/BoardConfig.mk
+++ b/target/board/generic/BoardConfig.mk
@@ -81,3 +81,5 @@
   # include an expanded selection of fonts for the SDK.
   EXTENDED_FONT_FOOTPRINT := true
 endif
+
+USE_CLANG_PLATFORM_BUILD := true
diff --git a/target/board/generic/sepolicy/file_contexts b/target/board/generic/sepolicy/file_contexts
index d057dc3..e626d9d 100644
--- a/target/board/generic/sepolicy/file_contexts
+++ b/target/board/generic/sepolicy/file_contexts
@@ -1,11 +1,12 @@
-/dev/block/mtdblock0       u:object_r:system_block_device:s0
-/dev/block/mtdblock1       u:object_r:userdata_block_device:s0
-/dev/block/mtdblock2       u:object_r:cache_block_device:s0
-/dev/goldfish_pipe	u:object_r:qemu_device:s0
-/dev/qemu_.*		u:object_r:qemu_device:s0
-/dev/socket/qemud	u:object_r:qemud_socket:s0
-/dev/ttyGF[0-9]*	u:object_r:serial_device:s0
-/system/bin/qemud	u:object_r:qemud_exec:s0
-/sys/qemu_trace(/.*)?	--	u:object_r:sysfs_writable:s0
+/dev/block/mtdblock0         u:object_r:system_block_device:s0
+/dev/block/mtdblock1         u:object_r:userdata_block_device:s0
+/dev/block/mtdblock2         u:object_r:cache_block_device:s0
+/dev/goldfish_pipe           u:object_r:qemu_device:s0
+/dev/qemu_.*                 u:object_r:qemu_device:s0
+/dev/socket/qemud            u:object_r:qemud_socket:s0
+/dev/ttyGF[0-9]*             u:object_r:serial_device:s0
+/dev/ttyS2                   u:object_r:console_device:s0
+/system/bin/qemud            u:object_r:qemud_exec:s0
+/sys/qemu_trace(/.*)?   --   u:object_r:sysfs_writable:s0
 /system/etc/init.goldfish.sh u:object_r:goldfish_setup_exec:s0
-/system/bin/qemu-props	     u:object_r:qemu_props_exec:s0
+/system/bin/qemu-props       u:object_r:qemu_props_exec:s0
diff --git a/target/board/generic/sepolicy/goldfish_setup.te b/target/board/generic/sepolicy/goldfish_setup.te
index 3fb79e7..b472d2a 100644
--- a/target/board/generic/sepolicy/goldfish_setup.te
+++ b/target/board/generic/sepolicy/goldfish_setup.te
@@ -1,5 +1,5 @@
 # goldfish-setup service: runs init.goldfish.sh script
-type goldfish_setup, domain;
+type goldfish_setup, domain, domain_deprecated;
 type goldfish_setup_exec, exec_type, file_type;
 
 init_daemon_domain(goldfish_setup)
@@ -9,6 +9,7 @@
 
 # Run ifconfig, route commands to configure interfaces and routes.
 allow goldfish_setup system_file:file execute_no_trans;
+allow goldfish_setup toolbox_exec:file rx_file_perms;
 allow goldfish_setup self:capability { net_admin net_raw };
 allow goldfish_setup self:udp_socket create_socket_perms;
 
diff --git a/target/board/generic/sepolicy/property.te b/target/board/generic/sepolicy/property.te
index b316d08..22d580a 100644
--- a/target/board/generic/sepolicy/property.te
+++ b/target/board/generic/sepolicy/property.te
@@ -1,2 +1,3 @@
 type qemu_prop, property_type;
 type radio_noril_prop, property_type;
+type opengles_prop, property_type;
diff --git a/target/board/generic/sepolicy/property_contexts b/target/board/generic/sepolicy/property_contexts
index a0a4020..152f0c8 100644
--- a/target/board/generic/sepolicy/property_contexts
+++ b/target/board/generic/sepolicy/property_contexts
@@ -2,3 +2,4 @@
 emu.                    u:object_r:qemu_prop:s0
 emulator.               u:object_r:qemu_prop:s0
 radio.noril             u:object_r:radio_noril_prop:s0
+opengles.               u:object_r:opengles_prop:s0
diff --git a/target/board/generic/sepolicy/qemu_props.te b/target/board/generic/sepolicy/qemu_props.te
index 4a91c4c..6768ce7 100644
--- a/target/board/generic/sepolicy/qemu_props.te
+++ b/target/board/generic/sepolicy/qemu_props.te
@@ -1,5 +1,5 @@
 # qemu-props service:  Sets system properties on boot.
-type qemu_props, domain;
+type qemu_props, domain, domain_deprecated;
 type qemu_props_exec, exec_type, file_type;
 
 init_daemon_domain(qemu_props)
@@ -8,3 +8,4 @@
 set_prop(qemu_props, qemu_prop)
 set_prop(qemu_props, dalvik_prop)
 set_prop(qemu_props, config_prop)
+set_prop(qemu_props, opengles_prop)
diff --git a/target/board/generic/sepolicy/qemud.te b/target/board/generic/sepolicy/qemud.te
index eee21c4..797cf5c 100644
--- a/target/board/generic/sepolicy/qemud.te
+++ b/target/board/generic/sepolicy/qemud.te
@@ -1,5 +1,5 @@
 # qemu support daemon
-type qemud, domain;
+type qemud, domain, domain_deprecated;
 type qemud_exec, exec_type, file_type;
 
 init_daemon_domain(qemud)
diff --git a/target/board/generic_arm64/BoardConfig.mk b/target/board/generic_arm64/BoardConfig.mk
index b757da1..40dd184 100644
--- a/target/board/generic_arm64/BoardConfig.mk
+++ b/target/board/generic_arm64/BoardConfig.mk
@@ -84,3 +84,5 @@
 TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
 
 BOARD_SEPOLICY_DIRS += build/target/board/generic/sepolicy
+
+USE_CLANG_PLATFORM_BUILD := true
diff --git a/target/board/generic_mips64/BoardConfig.mk b/target/board/generic_mips64/BoardConfig.mk
index 5c13447..8e8a68b 100644
--- a/target/board/generic_mips64/BoardConfig.mk
+++ b/target/board/generic_mips64/BoardConfig.mk
@@ -66,10 +66,12 @@
 
 TARGET_USERIMAGES_USE_EXT4 := true
 BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1342177280  # 1.25 GB swag, 20% more than before
-BOARD_USERDATAIMAGE_PARTITION_SIZE := 734003200
+BOARD_USERDATAIMAGE_PARTITION_SIZE := 1610612736  # 1.5 GB, lots of space for running tests
 BOARD_CACHEIMAGE_PARTITION_SIZE := 69206016
 BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4
 BOARD_FLASH_BLOCK_SIZE := 512
 TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
 
 BOARD_SEPOLICY_DIRS += build/target/board/generic/sepolicy
+
+DEX_PREOPT_DEFAULT := nostripping
diff --git a/target/board/generic_x86/BoardConfig.mk b/target/board/generic_x86/BoardConfig.mk
index 0b8e1cd..a34e4f2 100644
--- a/target/board/generic_x86/BoardConfig.mk
+++ b/target/board/generic_x86/BoardConfig.mk
@@ -45,3 +45,5 @@
 BOARD_SEPOLICY_DIRS += \
         build/target/board/generic/sepolicy \
         build/target/board/generic_x86/sepolicy
+
+USE_CLANG_PLATFORM_BUILD := true
diff --git a/target/board/generic_x86/sepolicy/system_server.te b/target/board/generic_x86/sepolicy/system_server.te
deleted file mode 100644
index 5d98a14..0000000
--- a/target/board/generic_x86/sepolicy/system_server.te
+++ /dev/null
@@ -1 +0,0 @@
-allow system_server self:process execmem;
diff --git a/target/board/generic_x86_64/BoardConfig.mk b/target/board/generic_x86_64/BoardConfig.mk
index 5105161..fda9e45 100755
--- a/target/board/generic_x86_64/BoardConfig.mk
+++ b/target/board/generic_x86_64/BoardConfig.mk
@@ -51,3 +51,5 @@
 BOARD_SEPOLICY_DIRS += \
         build/target/board/generic/sepolicy \
         build/target/board/generic_x86/sepolicy
+
+USE_CLANG_PLATFORM_BUILD := true
diff --git a/target/product/AndroidProducts.mk b/target/product/AndroidProducts.mk
index ac5902c..69edc72 100644
--- a/target/product/AndroidProducts.mk
+++ b/target/product/AndroidProducts.mk
@@ -59,7 +59,6 @@
     $(LOCAL_DIR)/aosp_arm64.mk \
     $(LOCAL_DIR)/aosp_mips64.mk \
     $(LOCAL_DIR)/aosp_x86_64.mk \
-    $(LOCAL_DIR)/full_x86_64.mk \
     $(LOCAL_DIR)/sdk_phone_armv7.mk \
     $(LOCAL_DIR)/sdk_phone_x86.mk \
     $(LOCAL_DIR)/sdk_phone_mips.mk \
diff --git a/target/product/aosp_arm.mk b/target/product/aosp_arm.mk
index 86b715c..781cae6 100644
--- a/target/product/aosp_arm.mk
+++ b/target/product/aosp_arm.mk
@@ -13,6 +13,6 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
-$(call inherit-product, $(SRC_TARGET_DIR)/product/full.mk)
+include $(SRC_TARGET_DIR)/product/full.mk
 
 PRODUCT_NAME := aosp_arm
diff --git a/target/product/aosp_arm64.mk b/target/product/aosp_arm64.mk
index ea8ec06..6232295 100644
--- a/target/product/aosp_arm64.mk
+++ b/target/product/aosp_arm64.mk
@@ -19,6 +19,12 @@
 # build quite specifically for the emulator, and might not be
 # entirely appropriate to inherit from for on-device configurations.
 
+# This is for enabling ethernet support for ranchu.
+# Consider removing this after RIL support is provided in ranchu.
+# Having this permission file on the target requires additional
+# dhcpcd_eth0 service defined in the init.ranchu.rc.
+PRODUCT_COPY_FILES += frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml
+
 $(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/board/generic_arm64/device.mk)
diff --git a/target/product/aosp_mips.mk b/target/product/aosp_mips.mk
index ceeb433..a76b93a 100644
--- a/target/product/aosp_mips.mk
+++ b/target/product/aosp_mips.mk
@@ -13,6 +13,6 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
-$(call inherit-product, $(SRC_TARGET_DIR)/product/full_mips.mk)
+include $(SRC_TARGET_DIR)/product/full_mips.mk
 
 PRODUCT_NAME := aosp_mips
diff --git a/target/product/aosp_mips64.mk b/target/product/aosp_mips64.mk
index 3a6026c..d485677 100644
--- a/target/product/aosp_mips64.mk
+++ b/target/product/aosp_mips64.mk
@@ -13,6 +13,26 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
-$(call inherit-product, $(SRC_TARGET_DIR)/product/full_mips64.mk)
 
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# mips64 build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+# This is for enabling ethernet support for ranchu.
+# Consider removing this after RIL support is provided in ranchu.
+# Having this permission file on the target requires additional
+# dhcpcd_eth0 service defined in the init.ranchu.rc.
+PRODUCT_COPY_FILES += frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips64/device.mk)
+
+include $(SRC_TARGET_DIR)/product/emulator.mk
+
+# Overrides
 PRODUCT_NAME := aosp_mips64
+PRODUCT_DEVICE := generic_mips64
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := AOSP on MIPS64 Emulator
diff --git a/target/product/aosp_x86.mk b/target/product/aosp_x86.mk
index 3e9b018..cba43c4 100644
--- a/target/product/aosp_x86.mk
+++ b/target/product/aosp_x86.mk
@@ -13,6 +13,6 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
-$(call inherit-product, $(SRC_TARGET_DIR)/product/full_x86.mk)
+include $(SRC_TARGET_DIR)/product/full_x86.mk
 
 PRODUCT_NAME := aosp_x86
diff --git a/target/product/aosp_x86_64.mk b/target/product/aosp_x86_64.mk
index 5a12c08..6c01e5a 100644
--- a/target/product/aosp_x86_64.mk
+++ b/target/product/aosp_x86_64.mk
@@ -13,6 +13,39 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #
-$(call inherit-product, $(SRC_TARGET_DIR)/product/full_x86_64.mk)
 
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+# If running on an emulator or some other device that has a LAN connection
+# that isn't a wifi connection. This will instruct init.rc to enable the
+# network connection so that you can use it with ADB
+
+# This is for enabling ethernet support for ranchu.
+# Consider removing this after RIL support is provided in ranchu.
+# Having this permission file on the target requires additional
+# dhcpcd_eth0 service defined in the init.ranchu.rc.
+PRODUCT_COPY_FILES += frameworks/native/data/etc/android.hardware.ethernet.xml:system/etc/permissions/android.hardware.ethernet.xml
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_x86_64/device.mk)
+
+include $(SRC_TARGET_DIR)/product/emulator.mk
+
+ifdef NET_ETH0_STARTONBOOT
+  PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
+endif
+
+# Ensure we package the BIOS files too.
+PRODUCT_PACKAGES += \
+	bios.bin \
+	vgabios-cirrus.bin \
+
+# Overrides
 PRODUCT_NAME := aosp_x86_64
+PRODUCT_DEVICE := generic_x86_64
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := AOSP on IA x86_64 Emulator
diff --git a/target/product/core.mk b/target/product/core.mk
index d453303..2992dbd 100644
--- a/target/product/core.mk
+++ b/target/product/core.mk
@@ -22,7 +22,8 @@
 
 PRODUCT_PACKAGES += \
     BasicDreams \
-    Browser \
+    BookmarkProvider \
+    Browser2 \
     Calendar \
     CalendarProvider \
     CaptivePortalLogin \
diff --git a/target/product/core_tiny.mk b/target/product/core_tiny.mk
index 2be0507..a12d2d1 100644
--- a/target/product/core_tiny.mk
+++ b/target/product/core_tiny.mk
@@ -36,9 +36,6 @@
     power.default
 
 PRODUCT_PACKAGES += \
-    local_time.default
-
-PRODUCT_PACKAGES += \
     BackupRestoreConfirmation \
     DefaultContainerService \
     SettingsProvider \
diff --git a/target/product/embedded.mk b/target/product/embedded.mk
index 25a8975..0f92a1c 100644
--- a/target/product/embedded.mk
+++ b/target/product/embedded.mk
@@ -75,7 +75,7 @@
 # SELinux packages
 PRODUCT_PACKAGES += \
     sepolicy \
-    file_contexts \
+    file_contexts.bin \
     seapp_contexts \
     property_contexts \
     mac_permissions.xml \
@@ -90,6 +90,5 @@
 PRODUCT_COPY_FILES += \
     system/core/rootdir/init.usb.rc:root/init.usb.rc \
     system/core/rootdir/init.usb.configfs.rc:root/init.usb.configfs.rc \
-    system/core/rootdir/init.trace.rc:root/init.trace.rc \
     system/core/rootdir/ueventd.rc:root/ueventd.rc \
     system/core/rootdir/etc/hosts:system/etc/hosts
diff --git a/target/product/emulator.mk b/target/product/emulator.mk
index 7394d4f..acc7a98 100644
--- a/target/product/emulator.mk
+++ b/target/product/emulator.mk
@@ -26,6 +26,7 @@
 PRODUCT_PACKAGES += \
     egl.cfg \
     gralloc.goldfish \
+    gralloc.ranchu \
     libGLESv1_CM_emulation \
     lib_renderControl_enc \
     libEGL_emulation \
diff --git a/target/product/full_mips64.mk b/target/product/full_mips64.mk
deleted file mode 100644
index e813e41..0000000
--- a/target/product/full_mips64.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# Copyright (C) 2013 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# mips64 build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips64/device.mk)
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-# Overrides
-PRODUCT_NAME := full_mips64
-PRODUCT_DEVICE := generic_mips64
-PRODUCT_BRAND := Android
-PRODUCT_MODEL := AOSP on MIPS64 Emulator
diff --git a/target/product/full_x86_64.mk b/target/product/full_x86_64.mk
deleted file mode 100755
index 051a86e..0000000
--- a/target/product/full_x86_64.mk
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-# If running on an emulator or some other device that has a LAN connection
-# that isn't a wifi connection. This will instruct init.rc to enable the
-# network connection so that you can use it with ADB
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_x86_64/device.mk)
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-ifdef NET_ETH0_STARTONBOOT
-  PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
-endif
-
-# Ensure we package the BIOS files too.
-PRODUCT_PACKAGES += \
-	bios.bin \
-	vgabios-cirrus.bin \
-
-# Overrides
-PRODUCT_NAME := full_x86_64
-PRODUCT_DEVICE := generic_x86_64
-PRODUCT_BRAND := Android
-PRODUCT_MODEL := AOSP on IA x86_64 Emulator
diff --git a/target/product/runtime_libart.mk b/target/product/runtime_libart.mk
index a35122b..c177981 100644
--- a/target/product/runtime_libart.mk
+++ b/target/product/runtime_libart.mk
@@ -18,6 +18,7 @@
 
 PRODUCT_PACKAGES += \
     apache-xml \
+    ahat \
     bouncycastle \
     cacerts \
     conscrypt \
diff --git a/target/product/verity.mk b/target/product/verity.mk
index 3e00b49..0badb9f 100644
--- a/target/product/verity.mk
+++ b/target/product/verity.mk
@@ -14,15 +14,20 @@
 # limitations under the License.
 #
 
-# Provides dependencies necessary for verified boot
+# Provides dependencies necessary for verified boot (only for user and
+# userdebug builds)
 
-PRODUCT_SUPPORTS_BOOT_SIGNER := true
-PRODUCT_SUPPORTS_VERITY := true
+user_variant := $(filter user userdebug,$(TARGET_BUILD_VARIANT))
+ifneq (,$(user_variant))
+    PRODUCT_SUPPORTS_BOOT_SIGNER := true
+    PRODUCT_SUPPORTS_VERITY := true
+    PRODUCT_SUPPORTS_VERITY_FEC := true
 
-# The dev key is used to sign boot and recovery images, and the verity
-# metadata table. Actual product deliverables will be re-signed by hand.
-# We expect this file to exist with the suffixes ".x509.pem" and ".pk8".
-PRODUCT_VERITY_SIGNING_KEY := build/target/product/security/verity
+    # The dev key is used to sign boot and recovery images, and the verity
+    # metadata table. Actual product deliverables will be re-signed by hand.
+    # We expect this file to exist with the suffixes ".x509.pem" and ".pk8".
+    PRODUCT_VERITY_SIGNING_KEY := build/target/product/security/verity
 
-PRODUCT_PACKAGES += \
-        verity_key
+    PRODUCT_PACKAGES += \
+            verity_key
+endif
diff --git a/tools/acp/Android.mk b/tools/acp/Android.mk
index 2b41bc1..e31ad3a 100644
--- a/tools/acp/Android.mk
+++ b/tools/acp/Android.mk
@@ -9,9 +9,6 @@
 LOCAL_SRC_FILES := \
     acp.c
 
-ifeq ($(HOST_OS),cygwin)
-LOCAL_CFLAGS += -DWIN32_EXE
-endif
 ifeq ($(HOST_OS),darwin)
 LOCAL_CFLAGS += -DMACOSX_RSRC
 endif
@@ -23,6 +20,5 @@
 LOCAL_MODULE := acp
 LOCAL_ACP_UNAVAILABLE := true
 LOCAL_CXX_STL := none
-LOCAL_ADDRESS_SANITIZER := false
 
 include $(BUILD_HOST_EXECUTABLE)
diff --git a/tools/buildinfo.sh b/tools/buildinfo.sh
index 89af758..dcb66bf 100755
--- a/tools/buildinfo.sh
+++ b/tools/buildinfo.sh
@@ -13,8 +13,8 @@
 echo "ro.build.version.release=$PLATFORM_VERSION"
 echo "ro.build.version.security_patch=$PLATFORM_SECURITY_PATCH"
 echo "ro.build.version.base_os=$PLATFORM_BASE_OS"
-echo "ro.build.date=`date`"
-echo "ro.build.date.utc=`date +%s`"
+echo "ro.build.date=`$DATE`"
+echo "ro.build.date.utc=`$DATE +%s`"
 echo "ro.build.type=$TARGET_BUILD_TYPE"
 echo "ro.build.user=$USER"
 echo "ro.build.host=`hostname`"
diff --git a/tools/check_prereq/check_prereq.c b/tools/check_prereq/check_prereq.c
deleted file mode 100644
index d7b8918..0000000
--- a/tools/check_prereq/check_prereq.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (C) 2009 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <sys/system_properties.h>
-#include <cutils/properties.h>
-
-// Compare the timestamp of the new build (passed on the command line)
-// against the current value of ro.build.date.utc.  Exit successfully
-// if the new build is newer than the current build (or if the
-// timestamps are the same).
-int main(int argc, char** argv) {
-  if (argc != 2) {
- usage:
-    fprintf(stderr, "usage: %s <timestamp>\n", argv[0]);
-    return 2;
-  }
-
-  char value[PROPERTY_VALUE_MAX];
-  char* default_value = "0";
-
-  property_get("ro.build.date.utc", value, default_value);
-
-  long current = strtol(value, NULL, 10);
-  char* end;
-  long install = strtol(argv[1], &end, 10);
-
-  printf("current build time: [%ld]  new build time: [%ld]\n",
-         current, install);
-
-  return (*end == 0 && current > 0 && install >= current) ? 0 : 1;
-}
diff --git a/tools/droiddoc/templates-sac/assets/css/default.css b/tools/droiddoc/templates-sac/assets/css/default.css
index f5dd624..c349c89 100644
--- a/tools/droiddoc/templates-sac/assets/css/default.css
+++ b/tools/droiddoc/templates-sac/assets/css/default.css
@@ -408,7 +408,7 @@
 .content-header.just-links {
   margin-bottom:0;
   padding-bottom:0;}
-    
+ 
 .content-header h1 {
   color:#000;
   margin:0;
@@ -420,8 +420,12 @@
   border-top: 1px solid #ccc;
   margin-top: 10px;
   padding-top:10px;
-  height: 30px; }
+  height: 30px;
+}
 
+.content-footer-sac {
+  border-top: 1px solid #ccc;
+}
 .content-footer .col-9 {
   margin-left:0;
 }
@@ -1507,7 +1511,7 @@
 .devices a.selected {
     color: #F80;
 }
-.accessories a.selected {
+.security a.selected {
     color: #9C0;
 }
 .compatibility a.selected {
@@ -4461,6 +4465,11 @@
   float:right;
 }
 
+.feedback {
+  float:right !important;
+  margin: 0 0 0 10px;
+  font-size: 14px;
+}
 
 
 /************* HOME/LANDING PAGE *****************/
diff --git a/tools/droiddoc/templates-sac/assets/js/docs.js b/tools/droiddoc/templates-sac/assets/js/docs.js
index d3a9223..0c93780 100644
--- a/tools/droiddoc/templates-sac/assets/js/docs.js
+++ b/tools/droiddoc/templates-sac/assets/js/docs.js
@@ -1871,9 +1871,9 @@
   devicesSearcher.setUserDefinedLabel("Devices");
   devicesSearcher.setSiteRestriction("http://source.android.com/devices/");
 
-  accessoriesSearcher = new google.search.WebSearch();
-  accessoriesSearcher.setUserDefinedLabel("Accessories");
-  accessoriesSearcher.setSiteRestriction("http://source.android.com/accessories/");
+  securitySearcher = new google.search.WebSearch();
+  securitySearcher.setUserDefinedLabel("Security");
+  securitySearcher.setSiteRestriction("http://source.android.com/security/");
 
   compatibilitySearcher = new google.search.WebSearch();
   compatibilitySearcher.setUserDefinedLabel("Compatibility");
@@ -1883,7 +1883,7 @@
   searchControl.addSearcher(sacSiteSearcher, searchOptions);
   searchControl.addSearcher(sourceSearcher, searchOptions);
   searchControl.addSearcher(devicesSearcher, searchOptions);
-  searchControl.addSearcher(accessoriesSearcher, searchOptions);
+  searchControl.addSearcher(securitySearcher, searchOptions);
   searchControl.addSearcher(compatibilitySearcher, searchOptions);
 
 
diff --git a/tools/droiddoc/templates-sac/components/masthead.cs b/tools/droiddoc/templates-sac/components/masthead.cs
index a8618c0..ee2582f 100644
--- a/tools/droiddoc/templates-sac/components/masthead.cs
+++ b/tools/droiddoc/templates-sac/components/masthead.cs
@@ -255,7 +255,7 @@
           <a href="<?cs var:toroot ?>index.html">
             <img src="<?cs var:toroot ?>assets/images/sac_logo.png"
                 srcset="<?cs var:toroot ?>assets/images/sac_logo@2x.png 2x"
-                width="123" height="25" alt="Android Developers" />
+                width="123" height="25" alt="Android Open Source Project" />
           </a>
           </div>
             <ul class="nav-x col-9">
@@ -266,9 +266,9 @@
                 <li class="devices"><a href="<?cs var:toroot ?>devices/index.html" <?cs
                   if:devices ?>class="selected"<?cs /if ?>
                   >Devices</a></li>
-                <li class="accessories"><a href="<?cs var:toroot ?>accessories/index.html" <?cs
-                  if:accessories ?>class="selected"<?cs /if ?>
-                  >Accessories</a></li>
+                <li class="security"><a href="<?cs var:toroot ?>security/index.html" <?cs
+                  if:security ?>class="selected"<?cs /if ?>
+                  >Security</a></li>
                 <li class="compatibility last"><a href="<?cs var:toroot ?>compatibility/index.html" <?cs
                   if:compatibility ?>class="selected"<?cs /if ?>
                   >Compatibility</a></li>
diff --git a/tools/droiddoc/templates-sac/customizations.cs b/tools/droiddoc/templates-sac/customizations.cs
index 6bdfe36..1120e70 100644
--- a/tools/droiddoc/templates-sac/customizations.cs
+++ b/tools/droiddoc/templates-sac/customizations.cs
@@ -355,7 +355,7 @@
 def:custom_footerlinks() ?>
   <p>
     <a href="<?cs var:toroot ?>source/index.html">About Android</a>&nbsp;&nbsp;|&nbsp;
-    <a href="<?cs var:toroot ?>source/community/index.html">Community</a>&nbsp;&nbsp;|&nbsp;
+    <a href="<?cs var:toroot ?>source/community.html">Community</a>&nbsp;&nbsp;|&nbsp;
     <a href="<?cs var:toroot ?>legal.html">Legal</a>&nbsp;&nbsp;|&nbsp;
   </p><?cs 
 /def ?>
@@ -382,8 +382,8 @@
     <?cs call:compatibility_nav() ?>
   <?cs elif:source ?>
     <?cs call:source_nav() ?>
-  <?cs elif:accessories ?>
-    <?cs call:accessories_nav() ?>
+  <?cs elif:security ?>
+    <?cs call:security_nav() ?>
   <?cs elif:reference ?>
     <?cs call:default_left_nav() ?>
   <?cs /if ?>
@@ -450,14 +450,14 @@
 <?cs /def ?>
 
 <?cs
-def:accessories_nav() ?>
+def:security_nav() ?>
   <div class="wrap clearfix" id="body-content">
     <div class="col-4" id="side-nav" itemscope itemtype="http://schema.org/SiteNavigationElement">
       <div id="devdoc-nav" class="scroll-pane">
 <a class="totop" href="#top" data-g-event="left-nav-top">to top</a>
 
 <?cs 
-        include:"../../../../docs/source.android.com/src/accessories/accessories_toc.cs" ?>
+        include:"../../../../docs/source.android.com/src/security/security_toc.cs" ?>
 
       </div>
     </div> <!-- end side-nav -->
diff --git a/tools/droiddoc/templates-sac/docpage.cs b/tools/droiddoc/templates-sac/docpage.cs
index 3e5c24f..3d120b6 100644
--- a/tools/droiddoc/templates-sac/docpage.cs
+++ b/tools/droiddoc/templates-sac/docpage.cs
@@ -34,7 +34,7 @@
             ru-lang="Предыдущий"
             ko-lang="이전"
             ja-lang="前へ"
-            es-lang="Anterior"               
+            es-lang="Anterior"
             >Previous</a>
         <a href="#" class="next-page-link hide"
             zh-TW-lang="下一堂課"
@@ -42,7 +42,7 @@
             ru-lang="Следующий"
             ko-lang="다음"
             ja-lang="次へ"
-            es-lang="Siguiente"               
+            es-lang="Siguiente"
             >Next</a>
         <a href="#" class="start-class-link hide"
             zh-TW-lang="開始上課"
@@ -50,7 +50,7 @@
             ru-lang="Начало работы"
             ko-lang="시작하기"
             ja-lang="開始する"
-            es-lang="Empezar"               
+            es-lang="Empezar"
             >Get started</a>
       </div>
     <?cs elif:!page.trainingcourse ?>
@@ -61,7 +61,7 @@
             ru-lang="Предыдущий"
             ko-lang="이전"
             ja-lang="前へ"
-            es-lang="Anterior"               
+            es-lang="Anterior"
             >Previous</a>
         <a href="#" class="next-page-link hide"
             zh-TW-lang="下一堂課"
@@ -69,7 +69,7 @@
             ru-lang="Следующий"
             ko-lang="다음"
             ja-lang="次へ"
-            es-lang="Siguiente"               
+            es-lang="Siguiente"
             >Next</a>
       </div>
     <?cs /if ?><?cs # end if training ?>
@@ -87,7 +87,6 @@
         <?cs /if ?>
           <h1 itemprop="name" style="margin-bottom:0;"><?cs var:page.title ?></h1>
           <p itemprop="description"><?cs var:page.landing.intro ?></p>
-          
           <p><a class="next-page-link topic-start-link"></a></p>
         <?cs if:page.landing.image ?>
         </div>
@@ -112,22 +111,16 @@
   <?cs # THIS IS THE MAIN DOC CONTENT ?>
   <div id="jd-content">
 
-
     <div class="jd-descr" itemprop="articleBody">
     <?cs call:tag_list(root.descr) ?>
     </div>
-      
-      <div class="content-footer <?cs 
-                    if:fullpage ?>wrap<?cs
-                    else ?>layout-content-row<?cs /if ?>" 
+
+      <div class="content-footer-sac"
                     itemscope itemtype="http://schema.org/SiteNavigationElement">
         <div class="layout-content-col <?cs 
                     if:fullpage ?>col-16<?cs 
                     elif:training||guide ?>col-8<?cs 
                     else ?>col-9<?cs /if ?>" style="padding-top:4px">
-          <?cs if:!page.noplus ?><?cs if:fullpage ?><style>#___plusone_0 {float:right !important;}</style><?cs /if ?>
-            <div class="g-plusone" data-size="medium"></div>
-          <?cs /if ?>
         </div>
         <?cs if:!fullscreen ?>
         <div class="paging-links layout-content-col col-4">
@@ -138,7 +131,7 @@
                 ru-lang="Предыдущий"
                 ko-lang="이전"
                 ja-lang="前へ"
-                es-lang="Anterior"               
+                es-lang="Anterior"
                 >Previous</a>
             <a href="#" class="next-page-link hide"
                 zh-TW-lang="下一堂課"
@@ -146,23 +139,20 @@
                 ru-lang="Следующий"
                 ko-lang="다음"
                 ja-lang="次へ"
-                es-lang="Siguiente"               
+                es-lang="Siguiente"
                 >Next</a>
           <?cs /if ?>
         </div>
         <?cs /if ?>
       </div>
-      
       <?cs # for training classes, provide a different kind of link when the next page is a different class ?>
       <?cs if:training && !page.article ?>
       <div class="layout-content-row content-footer next-class" style="display:none" itemscope itemtype="http://schema.org/SiteNavigationElement">
           <a href="#" class="next-class-link hide">Next class: </a>
       </div>
       <?cs /if ?>
-
-  </div> <!-- end jd-content -->
-
-<?cs include:"footer.cs" ?>
+    </div> <!-- end jd-content -->
+  <?cs include:"footer.cs" ?>
 </div><!-- end doc-content -->
 
 <?cs include:"trailer.cs" ?>
diff --git a/tools/droiddoc/templates-sac/footer.cs b/tools/droiddoc/templates-sac/footer.cs
index 6979ca0..ea22605 100644
--- a/tools/droiddoc/templates-sac/footer.cs
+++ b/tools/droiddoc/templates-sac/footer.cs
@@ -1,4 +1,9 @@
 <div id="footer" class="wrap" <?cs if:fullpage ?>style="width:940px"<?cs /if ?>>
+  <style>.feedback { float: right !Important }</style>
+  <div class="feedback">
+    <a href="#" class="button" onclick=" try {
+      userfeedback.api.startFeedback({'productId':'715571','authuser':'1'});return false;}catch(e){}">Send Feedback</a>
+  </div>
   <div id="copyright">
     <?cs call:custom_cc_copyright() ?>
   </div>
diff --git a/tools/droiddoc/templates-sac/head_tag.cs b/tools/droiddoc/templates-sac/head_tag.cs
index 5cee68c..b672b25 100644
--- a/tools/droiddoc/templates-sac/head_tag.cs
+++ b/tools/droiddoc/templates-sac/head_tag.cs
@@ -46,6 +46,8 @@
 <script src="<?cs var:toroot ?>navtree_data.js" async type="text/javascript"></script>
 <?cs /if ?>
 
+<script type="text/javascript" src="//www.gstatic.com/feedback/api.js"></script>
+
 <script type="text/javascript">
   var _gaq = _gaq || [];
   _gaq.push(['_setAccount', 'UA-45455297-1']);
diff --git a/tools/fs_config/fs_config.c b/tools/fs_config/fs_config.c
index b9a14e1..e797957 100644
--- a/tools/fs_config/fs_config.c
+++ b/tools/fs_config/fs_config.c
@@ -24,7 +24,6 @@
 
 #include <selinux/selinux.h>
 #include <selinux/label.h>
-#include <selinux/android.h>
 
 #include "private/android_filesystem_config.h"
 
diff --git a/tools/generate-notice-files.py b/tools/generate-notice-files.py
index 4571b70..5b13bf5 100755
--- a/tools/generate-notice-files.py
+++ b/tools/generate-notice-files.py
@@ -99,7 +99,7 @@
     # most browsers, but href's to table row ids do)
     id_table = {}
     id_count = 0
-    for value in file_hash.values():
+    for value in file_hash:
         for filename in value:
              id_table[filename] = id_count
         id_count += 1
@@ -116,7 +116,7 @@
     print >> output_file, "<ul>"
 
     # Flatten the list of lists into a single list of filenames
-    sorted_filenames = sorted(itertools.chain.from_iterable(file_hash.values()))
+    sorted_filenames = sorted(itertools.chain.from_iterable(file_hash))
 
     # Print out a nice table of contents
     for filename in sorted_filenames:
@@ -127,11 +127,11 @@
     print >> output_file, "</div><!-- table of contents -->"
     # Output the individual notice file lists
     print >>output_file, '<table cellpadding="0" cellspacing="0" border="0">'
-    for value in file_hash.values():
+    for value in file_hash:
         print >> output_file, '<tr id="id%d"><td class="same-license">' % id_table.get(value[0])
         print >> output_file, '<div class="label">Notices for file(s):</div>'
         print >> output_file, '<div class="file-list">'
-        for filename in sorted(value):
+        for filename in value:
             print >> output_file, "%s <br/>" % (SRC_DIR_STRIP_RE.sub(r"\1", filename))
         print >> output_file, "</div><!-- file-list -->"
         print >> output_file
@@ -154,10 +154,10 @@
     SRC_DIR_STRIP_RE = re.compile(input_dir + "(/.*).txt")
     output_file = open(output_filename, "wb")
     print >> output_file, file_title
-    for value in file_hash.values():
+    for value in file_hash:
       print >> output_file, "============================================================"
       print >> output_file, "Notices for file(s):"
-      for filename in sorted(value):
+      for filename in value:
         print >> output_file, SRC_DIR_STRIP_RE.sub(r"\1", filename)
       print >> output_file, "------------------------------------------------------------"
       print >> output_file, open(value[0]).read()
@@ -178,11 +178,12 @@
                 file_md5sum = md5sum(filename)
                 files_with_same_hash[file_md5sum].append(filename)
 
+    filesets = [sorted(files_with_same_hash[md5]) for md5 in sorted(files_with_same_hash.keys())]
 
     print "Combining NOTICE files into HTML"
-    combine_notice_files_html(files_with_same_hash, input_dir, html_output_file)
+    combine_notice_files_html(filesets, input_dir, html_output_file)
     print "Combining NOTICE files into text"
-    combine_notice_files_text(files_with_same_hash, input_dir, txt_output_file, file_title)
+    combine_notice_files_text(filesets, input_dir, txt_output_file, file_title)
 
 if __name__ == "__main__":
     main(args)
diff --git a/tools/makeparallel/.gitignore b/tools/makeparallel/.gitignore
new file mode 100644
index 0000000..a7d6181
--- /dev/null
+++ b/tools/makeparallel/.gitignore
@@ -0,0 +1,4 @@
+makeparallel
+*.o
+*.d
+test.out
diff --git a/tools/makeparallel/Makefile b/tools/makeparallel/Makefile
new file mode 100644
index 0000000..4e12b10
--- /dev/null
+++ b/tools/makeparallel/Makefile
@@ -0,0 +1,94 @@
+# Copyright 2015 Google Inc. All rights reserved
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Find source file location from path to this Makefile
+MAKEPARALLEL_SRC_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST))))
+ifndef MAKEPARALLEL_SRC_PATH
+  MAKEPARALLEL_SRC_PATH := .
+endif
+
+# Set defaults if they weren't set by the including Makefile
+MAKEPARALLEL_CXX ?= $(CXX)
+MAKEPARALLEL_LD ?= $(CXX)
+MAKEPARALLEL_INTERMEDIATES_PATH ?= .
+MAKEPARALLEL_BIN_PATH ?= .
+
+MAKEPARALLEL_CXX_SRCS := \
+	makeparallel.cpp
+
+MAKEPARALLEL_CXXFLAGS := -Wall -Werror -MMD -MP
+
+MAKEPARALLEL_CXX_SRCS := $(addprefix $(MAKEPARALLEL_SRC_PATH)/,\
+	$(MAKEPARALLEL_CXX_SRCS))
+
+MAKEPARALLEL_CXX_OBJS := $(patsubst $(MAKEPARALLEL_SRC_PATH)/%.cpp,$(MAKEPARALLEL_INTERMEDIATES_PATH)/%.o,$(MAKEPARALLEL_CXX_SRCS))
+
+MAKEPARALLEL := $(MAKEPARALLEL_BIN_PATH)/makeparallel
+
+ifeq ($(shell uname),Linux)
+MAKEPARALLEL_LIBS := -lrt -lpthread
+endif
+
+# Rule to build makeparallel into MAKEPARALLEL_BIN_PATH
+$(MAKEPARALLEL): $(MAKEPARALLEL_CXX_OBJS)
+	@mkdir -p $(dir $@)
+	$(MAKEPARALLEL_LD) -std=c++11 $(MAKEPARALLEL_CXXFLAGS) -o $@ $^ $(MAKEPARALLEL_LIBS)
+
+# Rule to build source files into object files in MAKEPARALLEL_INTERMEDIATES_PATH
+$(MAKEPARALLEL_CXX_OBJS): $(MAKEPARALLEL_INTERMEDIATES_PATH)/%.o: $(MAKEPARALLEL_SRC_PATH)/%.cpp
+	@mkdir -p $(dir $@)
+	$(MAKEPARALLEL_CXX) -c -std=c++11 $(MAKEPARALLEL_CXXFLAGS) -o $@ $<
+
+makeparallel_clean:
+	rm -rf $(MAKEPARALLEL)
+	rm -rf $(MAKEPARALLEL_INTERMEDIATES_PATH)/*.o
+	rm -rf $(MAKEPARALLEL_INTERMEDIATES_PATH)/*.d
+
+.PHONY: makeparallel_clean
+
+-include $(MAKEPARALLEL_INTERMEDIATES_PATH)/*.d
+
+.PHONY: makeparallel_test
+MAKEPARALLEL_TEST := MAKEFLAGS= MAKELEVEL= MAKEPARALLEL=$(MAKEPARALLEL) $(MAKE) -f Makefile.test test
+MAKEPARALLEL_NINJA_TEST := MAKEFLAGS= MAKELEVEL= MAKEPARALLEL="$(MAKEPARALLEL) --ninja" $(MAKE) -f Makefile.test test
+makeparallel_test: $(MAKEPARALLEL)
+	@EXPECTED="-j1234" $(MAKEPARALLEL_TEST) -j1234
+	@EXPECTED="-j123"  $(MAKEPARALLEL_TEST) -j123
+	@EXPECTED="-j1"    $(MAKEPARALLEL_TEST) -j1
+	@EXPECTED="-j1"    $(MAKEPARALLEL_TEST)
+
+	@EXPECTED="-j1234" $(MAKEPARALLEL_NINJA_TEST) -j1234
+	@EXPECTED="-j123"  $(MAKEPARALLEL_NINJA_TEST) -j123
+	@EXPECTED="-j1"    $(MAKEPARALLEL_NINJA_TEST) -j1
+	@EXPECTED="-j1"    $(MAKEPARALLEL_NINJA_TEST)
+	@EXPECTED=""       $(MAKEPARALLEL_NINJA_TEST) -j
+	@EXPECTED=""       $(MAKEPARALLEL_NINJA_TEST) -j -l
+
+	@EXPECTED="-j1234" $(MAKEPARALLEL_TEST) --no-print-directory -j1234
+	@EXPECTED="-j1234" $(MAKEPARALLEL_TEST) --no-print-directory -k -j1234
+	@EXPECTED="-j1234" $(MAKEPARALLEL_TEST) -k -j1234
+	@EXPECTED="-j1234" $(MAKEPARALLEL_TEST) -j1234 -k
+	@EXPECTED="-j1234" $(MAKEPARALLEL_TEST) -kt -j1234
+
+	@EXPECTED="-j1234"     $(MAKEPARALLEL_NINJA_TEST) --no-print-directory -j1234
+	@EXPECTED="-j1234 -k0" $(MAKEPARALLEL_NINJA_TEST) --no-print-directory -k -j1234
+	@EXPECTED="-j1234 -k0" $(MAKEPARALLEL_NINJA_TEST) -k -j1234
+	@EXPECTED="-j1234 -k0" $(MAKEPARALLEL_NINJA_TEST) -j1234 -k
+	@EXPECTED="-j1234 -k0" $(MAKEPARALLEL_NINJA_TEST) -kt -j1234
+
+	@EXPECTED="-j1"    $(MAKEPARALLEL_TEST) A=-j1234
+	@EXPECTED="-j1"    $(MAKEPARALLEL_TEST) A\ -j1234=-j1234
+	@EXPECTED="-j1234" $(MAKEPARALLEL_TEST) A\ -j1234=-j1234 -j1234
+
+	@EXPECTED="-j1234 args" ARGS="args" $(MAKEPARALLEL_TEST) -j1234
diff --git a/tools/makeparallel/Makefile.test b/tools/makeparallel/Makefile.test
new file mode 100644
index 0000000..cf53684
--- /dev/null
+++ b/tools/makeparallel/Makefile.test
@@ -0,0 +1,12 @@
+MAKEPARALLEL ?= ./makeparallel
+
+.PHONY: test
+test:
+	@+echo MAKEFLAGS=$${MAKEFLAGS};              \
+	result=$$($(MAKEPARALLEL) echo $(ARGS));     \
+	echo result: $${result};                     \
+	if [ "$${result}" = "$(EXPECTED)" ]; then    \
+	  echo SUCCESS && echo;                      \
+	else                                         \
+	  echo FAILED expected $(EXPECTED) && false; \
+	fi
diff --git a/tools/makeparallel/README.md b/tools/makeparallel/README.md
new file mode 100644
index 0000000..2e5fbf9
--- /dev/null
+++ b/tools/makeparallel/README.md
@@ -0,0 +1,54 @@
+<!---
+Copyright (C) 2015 The Android Open Source Project
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+     http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+-->
+
+makeparallel
+============
+makeparallel communicates with the [GNU make jobserver](http://make.mad-scientist.net/papers/jobserver-implementation/)
+in order claim all available jobs, and then passes the number of jobs
+claimed to a subprocess with `-j<jobs>`.
+
+The number of available jobs is determined by reading tokens from the jobserver
+until a read would block.  If the makeparallel rule is the only one running the
+number of jobs will be the total size of the jobserver pool, i.e. the value
+passed to make with `-j`.  Any jobs running in parallel with with the
+makeparellel rule will reduce the measured value, and thus reduce the
+parallelism available to the subprocess.
+
+To run a multi-thread or multi-process binary inside GNU make using
+makeparallel, add
+```Makefile
+	+makeparallel subprocess arguments
+```
+to a rule.  For example, to wrap ninja in make, use something like:
+```Makefile
+	+makeparallel ninja -f build.ninja
+```
+
+To determine the size of the jobserver pool, add
+```Makefile
+	+makeparallel echo > make.jobs
+```
+to a rule that is guarantee to run alone (i.e. all other rules are either
+dependencies of the makeparallel rule, or the depend on the makeparallel
+rule.  The output file will contain the `-j<num>` flag passed to the parent
+make process, or `-j1` if no flag was found.  Since GNU make will run
+makeparallel during the execution phase, after all variables have been
+set and evaluated, it is not possible to get the output of makeparallel
+into a make variable.  Instead, use a shell substitution to read the output
+file directly in a recipe.  For example:
+```Makefile
+	echo Make was started with $$(cat make.jobs)
+```
diff --git a/tools/makeparallel/makeparallel.cpp b/tools/makeparallel/makeparallel.cpp
new file mode 100644
index 0000000..576fe8d
--- /dev/null
+++ b/tools/makeparallel/makeparallel.cpp
@@ -0,0 +1,367 @@
+// Copyright (C) 2015 The Android Open Source Project
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+// makeparallel communicates with the GNU make jobserver
+// (http://make.mad-scientist.net/papers/jobserver-implementation/)
+// in order claim all available jobs, and then passes the number of jobs
+// claimed to a subprocess with -j<jobs>.
+
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <poll.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/wait.h>
+
+#include <string>
+#include <vector>
+
+#ifdef __linux__
+#include <error.h>
+#endif
+
+#ifdef __APPLE__
+#include <err.h>
+#define error(code, eval, fmt, ...) errc(eval, code, fmt, ##__VA_ARGS__)
+// Darwin does not interrupt syscalls by default.
+#define TEMP_FAILURE_RETRY(exp) (exp)
+#endif
+
+// Throw an error if fd is not valid.
+static void CheckFd(int fd) {
+  int ret = fcntl(fd, F_GETFD);
+  if (ret < 0) {
+    if (errno == EBADF) {
+      error(errno, 0, "no jobserver pipe, prefix recipe command with '+'");
+    } else {
+      error(errno, errno, "fnctl failed");
+    }
+  }
+}
+
+// Extract flags from MAKEFLAGS that need to be propagated to subproccess
+static std::vector<std::string> ReadMakeflags() {
+  std::vector<std::string> args;
+
+  const char* makeflags_env = getenv("MAKEFLAGS");
+  if (makeflags_env == nullptr) {
+    return args;
+  }
+
+  // The MAKEFLAGS format is pretty useless.  The first argument might be empty
+  // (starts with a leading space), or it might be a set of one-character flags
+  // merged together with no leading space, or it might be a variable
+  // definition.
+
+  std::string makeflags = makeflags_env;
+
+  // Split makeflags into individual args on spaces.  Multiple spaces are
+  // elided, but an initial space will result in a blank arg.
+  size_t base = 0;
+  size_t found;
+  do {
+    found = makeflags.find_first_of(" ", base);
+    args.push_back(makeflags.substr(base, found - base));
+    base = found + 1;
+  } while (found != makeflags.npos);
+
+  // Drop the first argument if it is empty
+  while (args.size() > 0 && args[0].size() == 0) {
+	  args.erase(args.begin());
+  }
+
+  // Prepend a - to the first argument if it does not have one and is not a
+  // variable definition
+  if (args.size() > 0 && args[0][0] != '-') {
+    if (args[0].find('=') == makeflags.npos) {
+      args[0] = '-' + args[0];
+    }
+  }
+
+  return args;
+}
+
+static bool ParseMakeflags(std::vector<std::string>& args,
+    int* in_fd, int* out_fd, bool* parallel, bool* keep_going) {
+
+  std::vector<char*> getopt_argv;
+  // getopt starts reading at argv[1]
+  getopt_argv.reserve(args.size() + 1);
+  getopt_argv.push_back(strdup(""));
+  for (std::string& v : args) {
+    getopt_argv.push_back(strdup(v.c_str()));
+  }
+
+  opterr = 0;
+  optind = 1;
+  while (1) {
+    const static option longopts[] = {
+        {"jobserver-fds", required_argument, 0, 0},
+        {0, 0, 0, 0},
+    };
+    int longopt_index = 0;
+
+    int c = getopt_long(getopt_argv.size(), getopt_argv.data(), "kj",
+        longopts, &longopt_index);
+
+    if (c == -1) {
+      break;
+    }
+
+    switch (c) {
+    case 0:
+      switch (longopt_index) {
+      case 0:
+      {
+        // jobserver-fds
+        if (sscanf(optarg, "%d,%d", in_fd, out_fd) != 2) {
+          error(EXIT_FAILURE, 0, "incorrect format for --jobserver-fds: %s", optarg);
+        }
+        // TODO: propagate in_fd, out_fd
+        break;
+      }
+      default:
+        abort();
+      }
+      break;
+    case 'j':
+      *parallel = true;
+      break;
+    case 'k':
+      *keep_going = true;
+      break;
+    case '?':
+      // ignore unknown arguments
+      break;
+    default:
+      abort();
+    }
+  }
+
+  for (char *v : getopt_argv) {
+    free(v);
+  }
+
+  return true;
+}
+
+// Read a single byte from fd, with timeout in milliseconds.  Returns true if
+// a byte was read, false on timeout.  Throws away the read value.
+// Non-reentrant, uses timer and signal handler global state, plus static
+// variable to communicate with signal handler.
+//
+// Uses a SIGALRM timer to fire a signal after timeout_ms that will interrupt
+// the read syscall if it hasn't yet completed.  If the timer fires before the
+// read the read could block forever, so read from a dup'd fd and close it from
+// the signal handler, which will cause the read to return EBADF if it occurs
+// after the signal.
+// The dup/read/close combo is very similar to the system described to avoid
+// a deadlock between SIGCHLD and read at
+// http://make.mad-scientist.net/papers/jobserver-implementation/
+static bool ReadByteTimeout(int fd, int timeout_ms) {
+  // global variable to communicate with the signal handler
+  static int dup_fd = -1;
+
+  // dup the fd so the signal handler can close it without losing the real one
+  dup_fd = dup(fd);
+  if (dup_fd < 0) {
+    error(errno, errno, "dup failed");
+  }
+
+  // set up a signal handler that closes dup_fd on SIGALRM
+  struct sigaction action = {};
+  action.sa_flags = SA_SIGINFO,
+  action.sa_sigaction = [](int, siginfo_t*, void*) {
+    close(dup_fd);
+  };
+  struct sigaction oldaction = {};
+  int ret = sigaction(SIGALRM, &action, &oldaction);
+  if (ret < 0) {
+    error(errno, errno, "sigaction failed");
+  }
+
+  // queue a SIGALRM after timeout_ms
+  const struct itimerval timeout = {{}, {0, timeout_ms * 1000}};
+  ret = setitimer(ITIMER_REAL, &timeout, NULL);
+  if (ret < 0) {
+    error(errno, errno, "setitimer failed");
+  }
+
+  // start the blocking read
+  char buf;
+  int read_ret = read(dup_fd, &buf, 1);
+  int read_errno = errno;
+
+  // cancel the alarm in case it hasn't fired yet
+  const struct itimerval cancel = {};
+  ret = setitimer(ITIMER_REAL, &cancel, NULL);
+  if (ret < 0) {
+    error(errno, errno, "reset setitimer failed");
+  }
+
+  // remove the signal handler
+  ret = sigaction(SIGALRM, &oldaction, NULL);
+  if (ret < 0) {
+    error(errno, errno, "reset sigaction failed");
+  }
+
+  // clean up the dup'd fd in case the signal never fired
+  close(dup_fd);
+  dup_fd = -1;
+
+  if (read_ret == 0) {
+    error(EXIT_FAILURE, 0, "EOF on jobserver pipe");
+  } else if (read_ret > 0) {
+    return true;
+  } else if (read_errno == EINTR || read_errno == EBADF) {
+    return false;
+  } else {
+    error(read_errno, read_errno, "read failed");
+  }
+  abort();
+}
+
+// Measure the size of the jobserver pool by reading from in_fd until it blocks
+static int GetJobserverTokens(int in_fd) {
+  int tokens = 0;
+  pollfd pollfds[] = {{in_fd, POLLIN, 0}};
+  int ret;
+  while ((ret = TEMP_FAILURE_RETRY(poll(pollfds, 1, 0))) != 0) {
+    if (ret < 0) {
+      error(errno, errno, "poll failed");
+    } else if (pollfds[0].revents != POLLIN) {
+      error(EXIT_FAILURE, 0, "unexpected event %d\n", pollfds[0].revents);
+    }
+
+    // There is probably a job token in the jobserver pipe.  There is a chance
+    // another process reads it first, which would cause a blocking read to
+    // block forever (or until another process put a token back in the pipe).
+    // The file descriptor can't be set to O_NONBLOCK as that would affect
+    // all users of the pipe, including the parent make process.
+    // ReadByteTimeout emulates a non-blocking read on a !O_NONBLOCK socket
+    // using a SIGALRM that fires after a short timeout.
+    bool got_token = ReadByteTimeout(in_fd, 10);
+    if (!got_token) {
+      // No more tokens
+      break;
+    } else {
+      tokens++;
+    }
+  }
+
+  // This process implicitly gets a token, so pool size is measured size + 1
+  return tokens;
+}
+
+// Return tokens to the jobserver pool.
+static void PutJobserverTokens(int out_fd, int tokens) {
+  // Return all the tokens to the pipe
+  char buf = '+';
+  for (int i = 0; i < tokens; i++) {
+    int ret = TEMP_FAILURE_RETRY(write(out_fd, &buf, 1));
+    if (ret < 0) {
+      error(errno, errno, "write failed");
+    } else if (ret == 0) {
+      error(EXIT_FAILURE, 0, "EOF on jobserver pipe");
+    }
+  }
+}
+
+int main(int argc, char* argv[]) {
+  int in_fd = -1;
+  int out_fd = -1;
+  bool parallel = false;
+  bool keep_going = false;
+  bool ninja = false;
+  int tokens = 0;
+
+  if (argc > 1 && strcmp(argv[1], "--ninja") == 0) {
+    ninja = true;
+    argv++;
+    argc--;
+  }
+
+  if (argc < 2) {
+    error(EXIT_FAILURE, 0, "expected command to run");
+  }
+
+  const char* path = argv[1];
+  std::vector<char*> args({argv[1]});
+
+  std::vector<std::string> makeflags = ReadMakeflags();
+  if (ParseMakeflags(makeflags, &in_fd, &out_fd, &parallel, &keep_going)) {
+    if (in_fd >= 0 && out_fd >= 0) {
+      CheckFd(in_fd);
+      CheckFd(out_fd);
+      fcntl(in_fd, F_SETFD, FD_CLOEXEC);
+      fcntl(out_fd, F_SETFD, FD_CLOEXEC);
+      tokens = GetJobserverTokens(in_fd);
+    }
+  }
+
+  std::string jarg = "-j" + std::to_string(tokens + 1);
+
+  if (ninja) {
+    if (!parallel) {
+      // ninja is parallel by default, pass -j1 to disable parallelism if make wasn't parallel
+      args.push_back(strdup("-j1"));
+    } else if (tokens > 0) {
+      args.push_back(strdup(jarg.c_str()));
+    }
+    if (keep_going) {
+      args.push_back(strdup("-k0"));
+    }
+  } else {
+    args.push_back(strdup(jarg.c_str()));
+  }
+
+  args.insert(args.end(), &argv[2], &argv[argc]);
+
+  args.push_back(nullptr);
+
+  pid_t pid = fork();
+  if (pid < 0) {
+    error(errno, errno, "fork failed");
+  } else if (pid == 0) {
+    // child
+    int ret = execvp(path, args.data());
+    if (ret < 0) {
+      error(errno, errno, "exec failed");
+    }
+    abort();
+  }
+
+  // parent
+  siginfo_t status = {};
+  int exit_status = 0;
+  int ret = waitid(P_PID, pid, &status, WEXITED);
+  if (ret < 0) {
+    error(errno, errno, "waitpid failed");
+  } else if (status.si_code == CLD_EXITED) {
+    exit_status = status.si_status;
+  } else {
+    exit_status = -(status.si_status);
+  }
+
+  if (tokens > 0) {
+    PutJobserverTokens(out_fd, tokens);
+  }
+  exit(exit_status);
+}
diff --git a/tools/check_prereq/Android.mk b/tools/normalize_path.py
old mode 100644
new mode 100755
similarity index 61%
copy from tools/check_prereq/Android.mk
copy to tools/normalize_path.py
index 4329aff..6c4d548
--- a/tools/check_prereq/Android.mk
+++ b/tools/normalize_path.py
@@ -1,4 +1,6 @@
-# Copyright (C) 2009 The Android Open Source Project
+#!/usr/bin/env python
+#
+# Copyright (C) 2015 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -11,15 +13,17 @@
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
+"""
+Normalize and output paths from arguments, or stdin if no arguments provided.
+"""
 
-LOCAL_PATH := $(call my-dir)
-include $(CLEAR_VARS)
+import os.path
+import sys
 
-LOCAL_SRC_FILES := check_prereq.c
-LOCAL_MODULE := check_prereq
-LOCAL_FORCE_STATIC_EXECUTABLE := true
-LOCAL_MODULE_TAGS := eng
-LOCAL_C_INCLUDES +=
-LOCAL_STATIC_LIBRARIES += libcutils libc
+if len(sys.argv) > 1:
+  for p in sys.argv[1:]:
+    print os.path.normpath(p)
+  sys.exit(0)
 
-include $(BUILD_EXECUTABLE)
+for line in sys.stdin:
+  print os.path.normpath(line.strip())
diff --git a/tools/post_process_props.py b/tools/post_process_props.py
index fa6106f..9dcaadf 100755
--- a/tools/post_process_props.py
+++ b/tools/post_process_props.py
@@ -37,11 +37,12 @@
   # (this is for userdebug builds)
   if prop.get("ro.debuggable") == "1":
     val = prop.get("persist.sys.usb.config")
-    if val == "":
-      val = "adb"
-    else:
-      val = val + ",adb"
-    prop.put("persist.sys.usb.config", val)
+    if "adb" not in val:
+      if val == "":
+        val = "adb"
+      else:
+        val = val + ",adb"
+      prop.put("persist.sys.usb.config", val)
   # UsbDeviceManager expects a value here.  If it doesn't get it, it will
   # default to "adb". That might not the right policy there, but it's better
   # to be explicit.
diff --git a/tools/releasetools/add_img_to_target_files.py b/tools/releasetools/add_img_to_target_files.py
index 5e81ad2..7cb9072 100755
--- a/tools/releasetools/add_img_to_target_files.py
+++ b/tools/releasetools/add_img_to_target_files.py
@@ -31,6 +31,7 @@
 import datetime
 import errno
 import os
+import shutil
 import tempfile
 import zipfile
 
@@ -144,10 +145,6 @@
     image_props["fs_config"] = fs_config
   if block_list:
     image_props["block_list"] = block_list
-  if image_props.get("system_root_image") == "true":
-    image_props["ramdisk_dir"] = os.path.join(input_dir, "BOOT/RAMDISK")
-    image_props["ramdisk_fs_config"] = os.path.join(
-        input_dir, "META/boot_filesystem_config.txt")
 
   succ = build_image.BuildImage(os.path.join(input_dir, what),
                                 image_props, img)
@@ -157,7 +154,13 @@
 
 
 def AddUserdata(output_zip, prefix="IMAGES/"):
-  """Create an empty userdata image and store it in output_zip."""
+  """Create a userdata image and store it in output_zip.
+
+  In most case we just create and store an empty userdata.img;
+  But the invoker can also request to create userdata.img with real
+  data from the target files, by setting "userdata_img_with_data=true"
+  in OPTIONS.info_dict.
+  """
 
   prebuilt_path = os.path.join(OPTIONS.input_tmp, prefix, "userdata.img")
   if os.path.exists(prebuilt_path):
@@ -181,10 +184,19 @@
 
   # The name of the directory it is making an image out of matters to
   # mkyaffs2image.  So we create a temp dir, and within it we create an
-  # empty dir named "data", and build the image from that.
+  # empty dir named "data", or a symlink to the DATA dir,
+  # and build the image from that.
   temp_dir = tempfile.mkdtemp()
   user_dir = os.path.join(temp_dir, "data")
-  os.mkdir(user_dir)
+  empty = (OPTIONS.info_dict.get("userdata_img_with_data") != "true")
+  if empty:
+    # Create an empty dir.
+    os.mkdir(user_dir)
+  else:
+    # Symlink to the DATA dir.
+    os.symlink(os.path.join(OPTIONS.input_tmp, "DATA"),
+               user_dir)
+
   img = tempfile.NamedTemporaryFile()
 
   fstab = OPTIONS.info_dict["fstab"]
@@ -196,8 +208,7 @@
   common.CheckSize(img.name, "userdata.img", OPTIONS.info_dict)
   common.ZipWrite(output_zip, img.name, prefix + "userdata.img")
   img.close()
-  os.rmdir(user_dir)
-  os.rmdir(temp_dir)
+  shutil.rmtree(temp_dir)
 
 
 def AddCache(output_zip, prefix="IMAGES/"):
diff --git a/tools/releasetools/blockimgdiff.py b/tools/releasetools/blockimgdiff.py
index a6c6bd8..1a5b93d 100644
--- a/tools/releasetools/blockimgdiff.py
+++ b/tools/releasetools/blockimgdiff.py
@@ -128,10 +128,10 @@
     # verification if it has non-zero contents in the padding bytes.
     # Bug: 23828506
     if padded:
-      self.clobbered_blocks = RangeSet(
-          data=(self.total_blocks-1, self.total_blocks))
+      clobbered_blocks = [self.total_blocks-1, self.total_blocks]
     else:
-      self.clobbered_blocks = RangeSet()
+      clobbered_blocks = []
+    self.clobbered_blocks = clobbered_blocks
     self.extended = RangeSet()
 
     zero_blocks = []
@@ -147,11 +147,15 @@
         nonzero_blocks.append(i)
         nonzero_blocks.append(i+1)
 
-    self.file_map = {"__ZERO": RangeSet(zero_blocks),
-                     "__NONZERO": RangeSet(nonzero_blocks)}
+    assert zero_blocks or nonzero_blocks or clobbered_blocks
 
-    if self.clobbered_blocks:
-      self.file_map["__COPY"] = self.clobbered_blocks
+    self.file_map = dict()
+    if zero_blocks:
+      self.file_map["__ZERO"] = RangeSet(data=zero_blocks)
+    if nonzero_blocks:
+      self.file_map["__NONZERO"] = RangeSet(data=nonzero_blocks)
+    if clobbered_blocks:
+      self.file_map["__COPY"] = RangeSet(data=clobbered_blocks)
 
   def ReadRangeSet(self, ranges):
     return [self.data[s*self.blocksize:e*self.blocksize] for (s, e) in ranges]
@@ -237,7 +241,7 @@
 # original image.
 
 class BlockImageDiff(object):
-  def __init__(self, tgt, src=None, threads=None, version=3):
+  def __init__(self, tgt, src=None, threads=None, version=4):
     if threads is None:
       threads = multiprocessing.cpu_count() // 2
       if threads == 0:
@@ -248,7 +252,7 @@
     self.src_basenames = {}
     self.src_numpatterns = {}
 
-    assert version in (1, 2, 3)
+    assert version in (1, 2, 3, 4)
 
     self.tgt = tgt
     if src is None:
@@ -334,8 +338,8 @@
           sid = next_stash_id
           next_stash_id += 1
         stashes[s] = sid
-        stashed_blocks += sr.size()
         if self.version == 2:
+          stashed_blocks += sr.size()
           out.append("stash %d %s\n" % (sid, sr.to_string_raw()))
         else:
           sh = self.HashBlocks(self.src, sr)
@@ -343,15 +347,17 @@
             stashes[sh] += 1
           else:
             stashes[sh] = 1
+            stashed_blocks += sr.size()
             out.append("stash %s %s\n" % (sh, sr.to_string_raw()))
 
       if stashed_blocks > max_stashed_blocks:
         max_stashed_blocks = stashed_blocks
 
       free_string = []
+      free_size = 0
 
       if self.version == 1:
-        src_str = xf.src_ranges.to_string_raw()
+        src_str = xf.src_ranges.to_string_raw() if xf.src_ranges else ""
       elif self.version >= 2:
 
         #   <# blocks> <src ranges>
@@ -367,18 +373,25 @@
         mapped_stashes = []
         for s, sr in xf.use_stash:
           sid = stashes.pop(s)
-          stashed_blocks -= sr.size()
           unstashed_src_ranges = unstashed_src_ranges.subtract(sr)
           sh = self.HashBlocks(self.src, sr)
           sr = xf.src_ranges.map_within(sr)
           mapped_stashes.append(sr)
           if self.version == 2:
             src_str.append("%d:%s" % (sid, sr.to_string_raw()))
+            # A stash will be used only once. We need to free the stash
+            # immediately after the use, instead of waiting for the automatic
+            # clean-up at the end. Because otherwise it may take up extra space
+            # and lead to OTA failures.
+            # Bug: 23119955
+            free_string.append("free %d\n" % (sid,))
+            free_size += sr.size()
           else:
             assert sh in stashes
             src_str.append("%s:%s" % (sh, sr.to_string_raw()))
             stashes[sh] -= 1
             if stashes[sh] == 0:
+              free_size += sr.size()
               free_string.append("free %s\n" % (sh))
               stashes.pop(sh)
           heapq.heappush(free_stash_ids, sid)
@@ -482,6 +495,7 @@
 
       if free_string:
         out.append("".join(free_string))
+        stashed_blocks -= free_size
 
       if self.version >= 2 and common.OPTIONS.cache_size is not None:
         # Sanity check: abort if we're going to need more stash space than
@@ -501,6 +515,7 @@
     # Zero out extended blocks as a workaround for bug 20881595.
     if self.tgt.extended:
       out.append("zero %s\n" % (self.tgt.extended.to_string_raw(),))
+      total += self.tgt.extended.size()
 
     # We erase all the blocks on the partition that a) don't contain useful
     # data in the new image and b) will not be touched by dm-verity.
@@ -511,7 +526,7 @@
       out.append("erase %s\n" % (new_dontcare.to_string_raw(),))
 
     out.insert(0, "%d\n" % (self.version,))   # format version number
-    out.insert(1, str(total) + "\n")
+    out.insert(1, "%d\n" % (total,))
     if self.version >= 2:
       # version 2 only: after the total block count, we give the number
       # of stash slots needed, and the maximum size needed (in blocks)
diff --git a/tools/releasetools/build_image.py b/tools/releasetools/build_image.py
index 357a666..cd750e8 100755
--- a/tools/releasetools/build_image.py
+++ b/tools/releasetools/build_image.py
@@ -33,6 +33,7 @@
 OPTIONS = common.OPTIONS
 
 FIXED_SALT = "aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7"
+BLOCK_SIZE = 4096
 
 def RunCommand(cmd):
   """Echo and run the given command.
@@ -48,6 +49,14 @@
   print "%s" % (output.rstrip(),)
   return (output, p.returncode)
 
+def GetVerityFECSize(partition_size):
+  cmd = "fec -s %d" % partition_size
+  status, output = commands.getstatusoutput(cmd)
+  if status:
+    print output
+    return False, 0
+  return True, int(output)
+
 def GetVerityTreeSize(partition_size):
   cmd = "build_verity_tree -s %d"
   cmd %= partition_size
@@ -67,7 +76,22 @@
     return False, 0
   return True, int(output)
 
-def AdjustPartitionSizeForVerity(partition_size):
+def GetVeritySize(partition_size, fec_supported):
+  success, verity_tree_size = GetVerityTreeSize(partition_size)
+  if not success:
+    return 0
+  success, verity_metadata_size = GetVerityMetadataSize(partition_size)
+  if not success:
+    return 0
+  verity_size = verity_tree_size + verity_metadata_size
+  if fec_supported:
+    success, fec_size = GetVerityFECSize(partition_size + verity_size)
+    if not success:
+      return 0
+    return verity_size + fec_size
+  return verity_size
+
+def AdjustPartitionSizeForVerity(partition_size, fec_supported):
   """Modifies the provided partition size to account for the verity metadata.
 
   This information is used to size the created image appropriately.
@@ -76,13 +100,43 @@
   Returns:
     The size of the partition adjusted for verity metadata.
   """
-  success, verity_tree_size = GetVerityTreeSize(partition_size)
-  if not success:
-    return 0
-  success, verity_metadata_size = GetVerityMetadataSize(partition_size)
-  if not success:
-    return 0
-  return partition_size - verity_tree_size - verity_metadata_size
+  key = "%d %d" % (partition_size, fec_supported)
+  if key in AdjustPartitionSizeForVerity.results:
+    return AdjustPartitionSizeForVerity.results[key]
+
+  hi = partition_size
+  if hi % BLOCK_SIZE != 0:
+    hi = (hi // BLOCK_SIZE) * BLOCK_SIZE
+
+  # verity tree and fec sizes depend on the partition size, which
+  # means this estimate is always going to be unnecessarily small
+  lo = partition_size - GetVeritySize(hi, fec_supported)
+  result = lo
+
+  # do a binary search for the optimal size
+  while lo < hi:
+    i = ((lo + hi) // (2 * BLOCK_SIZE)) * BLOCK_SIZE
+    size = i + GetVeritySize(i, fec_supported)
+    if size <= partition_size:
+      if result < i:
+        result = i
+      lo = i + BLOCK_SIZE
+    else:
+      hi = i
+
+  AdjustPartitionSizeForVerity.results[key] = result
+  return result
+
+AdjustPartitionSizeForVerity.results = {}
+
+def BuildVerityFEC(sparse_image_path, verity_fec_path, prop_dict):
+  cmd = "fec -e %s %s" % (sparse_image_path, verity_fec_path)
+  print cmd
+  status, output = commands.getstatusoutput(cmd)
+  if status:
+    print "Could not build FEC data! Error: %s" % output
+    return False
+  return True
 
 def BuildVerityTree(sparse_image_path, verity_image_path, prop_dict):
   cmd = "build_verity_tree -A %s %s %s" % (
@@ -130,12 +184,12 @@
 
 def BuildVerifiedImage(data_image_path, verity_image_path,
                        verity_metadata_path):
-  if not Append2Simg(data_image_path, verity_metadata_path,
-                     "Could not append verity metadata!"):
-    return False
   if not Append2Simg(data_image_path, verity_image_path,
                      "Could not append verity tree!"):
     return False
+  if not Append2Simg(data_image_path, verity_metadata_path,
+                     "Could not append verity metadata!"):
+    return False
   return True
 
 def UnsparseImage(sparse_image_path, replace=True):
@@ -154,7 +208,7 @@
     return False, None
   return True, unsparse_image_path
 
-def MakeVerityEnabledImage(out_file, prop_dict):
+def MakeVerityEnabledImage(out_file, fec_supported, prop_dict):
   """Creates an image that is verifiable using dm-verity.
 
   Args:
@@ -180,6 +234,7 @@
   # get partial image paths
   verity_image_path = os.path.join(tempdir_name, "verity.img")
   verity_metadata_path = os.path.join(tempdir_name, "verity_metadata.img")
+  verity_fec_path = os.path.join(tempdir_name, "verity_fec.img")
 
   # build the verity tree and get the root hash and salt
   if not BuildVerityTree(out_file, verity_image_path, prop_dict):
@@ -201,6 +256,16 @@
     shutil.rmtree(tempdir_name, ignore_errors=True)
     return False
 
+  if fec_supported:
+    # build FEC for the entire partition, including metadata
+    if not BuildVerityFEC(out_file, verity_fec_path, prop_dict):
+      shutil.rmtree(tempdir_name, ignore_errors=True)
+      return False
+
+    if not Append2Simg(out_file, verity_fec_path, "Could not append FEC!"):
+      shutil.rmtree(tempdir_name, ignore_errors=True)
+      return False
+
   shutil.rmtree(tempdir_name, ignore_errors=True)
   return True
 
@@ -248,12 +313,14 @@
 
   is_verity_partition = "verity_block_device" in prop_dict
   verity_supported = prop_dict.get("verity") == "true"
+  verity_fec_supported = prop_dict.get("verity_fec") == "true"
+
   # Adjust the partition size to make room for the hashes if this is to be
   # verified.
   if verity_supported and is_verity_partition and fs_spans_partition:
     partition_size = int(prop_dict.get("partition_size"))
-
-    adjusted_size = AdjustPartitionSizeForVerity(partition_size)
+    adjusted_size = AdjustPartitionSizeForVerity(partition_size,
+                                                 verity_fec_supported)
     if not adjusted_size:
       return False
     prop_dict["partition_size"] = str(adjusted_size)
@@ -366,7 +433,7 @@
             "%d" % (mount_point, image_size, partition_size))
       return False
     if verity_supported and is_verity_partition:
-      if 2 * image_size - AdjustPartitionSizeForVerity(image_size) > partition_size:
+      if 2 * image_size - AdjustPartitionSizeForVerity(image_size, verity_fec_supported) > partition_size:
         print "Error: No more room on %s to fit verity data" % mount_point
         return False
     prop_dict["original_partition_size"] = prop_dict["partition_size"]
@@ -374,7 +441,7 @@
 
   # create the verified image if this is to be verified
   if verity_supported and is_verity_partition:
-    if not MakeVerityEnabledImage(out_file, prop_dict):
+    if not MakeVerityEnabledImage(out_file, verity_fec_supported, prop_dict):
       return False
 
   if run_fsck and prop_dict.get("skip_fsck") != "true":
@@ -416,7 +483,8 @@
       "skip_fsck",
       "verity",
       "verity_key",
-      "verity_signer_cmd"
+      "verity_signer_cmd",
+      "verity_fec"
       )
   for p in common_props:
     copy_prop(p, p)
@@ -432,6 +500,7 @@
     copy_prop("system_verity_block_device", "verity_block_device")
     copy_prop("system_root_image", "system_root_image")
     copy_prop("ramdisk_dir", "ramdisk_dir")
+    copy_prop("ramdisk_fs_config", "ramdisk_fs_config")
     copy_prop("has_ext4_reserved_blocks", "has_ext4_reserved_blocks")
     copy_prop("system_squashfs_compressor", "squashfs_compressor")
     copy_prop("system_squashfs_compressor_opt", "squashfs_compressor_opt")
diff --git a/tools/releasetools/common.py b/tools/releasetools/common.py
index 844d376..872dd4c 100644
--- a/tools/releasetools/common.py
+++ b/tools/releasetools/common.py
@@ -153,23 +153,35 @@
   if "fstab_version" not in d:
     d["fstab_version"] = "1"
 
-  # During building, we use the "file_contexts" in the out/ directory tree.
-  # It is no longer available when (re)generating from target_files zip. So
-  # when generating from target_files zip, we look for a copy under META/
-  # first, if not available search under BOOT/RAMDISK/. Note that we may need
-  # a different file_contexts to build images than the one running on device,
-  # such as when enabling system_root_image. In that case, we must have the
-  # one for building copied to META/.
+  # A few properties are stored as links to the files in the out/ directory.
+  # It works fine with the build system. However, they are no longer available
+  # when (re)generating from target_files zip. If input_dir is not None, we
+  # are doing repacking. Redirect those properties to the actual files in the
+  # unzipped directory.
   if input_dir is not None:
-    fc_config = os.path.join(input_dir, "META", "file_contexts")
+    # We carry a copy of file_contexts.bin under META/. If not available,
+    # search BOOT/RAMDISK/. Note that sometimes we may need a different file
+    # to build images than the one running on device, such as when enabling
+    # system_root_image. In that case, we must have the one for image
+    # generation copied to META/.
+    fc_basename = os.path.basename(d.get("selinux_fc", "file_contexts"))
+    fc_config = os.path.join(input_dir, "META", fc_basename)
+    if d.get("system_root_image") == "true":
+      assert os.path.exists(fc_config)
     if not os.path.exists(fc_config):
-      fc_config = os.path.join(input_dir, "BOOT", "RAMDISK", "file_contexts")
+      fc_config = os.path.join(input_dir, "BOOT", "RAMDISK", fc_basename)
       if not os.path.exists(fc_config):
         fc_config = None
 
     if fc_config:
       d["selinux_fc"] = fc_config
 
+    # Similarly we need to redirect "ramdisk_dir" and "ramdisk_fs_config".
+    if d.get("system_root_image") == "true":
+      d["ramdisk_dir"] = os.path.join(input_dir, "ROOT")
+      d["ramdisk_fs_config"] = os.path.join(
+          input_dir, "META", "root_filesystem_config.txt")
+
   try:
     data = read_helper("META/imagesizes.txt")
     for line in data.split("\n"):
@@ -957,7 +969,7 @@
     zinfo = zipfile.ZipInfo(filename=zinfo_or_arcname)
     zinfo.compress_type = zip_file.compression
     if perms is None:
-      perms = 0o644
+      perms = 0o100644
   else:
     zinfo = zinfo_or_arcname
 
@@ -967,6 +979,9 @@
 
   # If perms is given, it has a priority.
   if perms is not None:
+    # If perms doesn't set the file type, mark it as a regular file.
+    if perms & 0o770000 == 0:
+      perms |= 0o100000
     zinfo.external_attr = perms << 16
 
   # Use a fixed timestamp so the output is repeatable.
@@ -1070,6 +1085,9 @@
     processor."""
     return self._DoCall("IncrementalOTA_InstallEnd")
 
+  def VerifyOTA_Assertions(self):
+    return self._DoCall("VerifyOTA_Assertions")
+
 class File(object):
   def __init__(self, name, data):
     self.name = name
@@ -1264,6 +1282,25 @@
     self._WriteUpdate(script, output_zip)
     self._WritePostInstallVerifyScript(script)
 
+  def WriteStrictVerifyScript(self, script):
+    """Verify all the blocks in the care_map, including clobbered blocks.
+
+    This differs from the WriteVerifyScript() function: a) it prints different
+    error messages; b) it doesn't allow half-way updated images to pass the
+    verification."""
+
+    partition = self.partition
+    script.Print("Verifying %s..." % (partition,))
+    ranges = self.tgt.care_map
+    ranges_str = ranges.to_string_raw()
+    script.AppendExtra('range_sha1("%s", "%s") == "%s" && '
+                       'ui_print("    Verified.") || '
+                       'ui_print("\\"%s\\" has unexpected contents.");' % (
+                       self.device, ranges_str,
+                       self.tgt.TotalSha1(include_clobbered_blocks=True),
+                       self.device))
+    script.AppendExtra("")
+
   def WriteVerifyScript(self, script):
     partition = self.partition
     if not self.src:
@@ -1271,7 +1308,20 @@
     else:
       ranges = self.src.care_map.subtract(self.src.clobbered_blocks)
       ranges_str = ranges.to_string_raw()
-      if self.version >= 3:
+      if self.version >= 4:
+        script.AppendExtra(('if (range_sha1("%s", "%s") == "%s" || '
+                            'block_image_verify("%s", '
+                            'package_extract_file("%s.transfer.list"), '
+                            '"%s.new.dat", "%s.patch.dat") || '
+                            '(block_image_recover("%s", "%s") && '
+                            'block_image_verify("%s", '
+                            'package_extract_file("%s.transfer.list"), '
+                            '"%s.new.dat", "%s.patch.dat"))) then') % (
+                            self.device, ranges_str, self.src.TotalSha1(),
+                            self.device, partition, partition, partition,
+                            self.device, ranges_str,
+                            self.device, partition, partition, partition))
+      elif self.version == 3:
         script.AppendExtra(('if (range_sha1("%s", "%s") == "%s" || '
                             'block_image_verify("%s", '
                             'package_extract_file("%s.transfer.list"), '
@@ -1504,6 +1554,7 @@
     if (not init_rc_file.startswith('init.') or
         not init_rc_file.endswith('.rc')):
       continue
+
     with open(os.path.join(init_rc_dir, init_rc_file)) as f:
       for line in f:
         m = re.match(r"^service flash_recovery /system/(\S+)\s*$", line)
@@ -1511,8 +1562,10 @@
           sh_location = m.group(1)
           found = True
           break
+
     if found:
       break
+
   print "putting script in", sh_location
 
   output_sink(sh_location, sh)
diff --git a/tools/releasetools/edify_generator.py b/tools/releasetools/edify_generator.py
index a52e328..b3785ac 100644
--- a/tools/releasetools/edify_generator.py
+++ b/tools/releasetools/edify_generator.py
@@ -152,6 +152,15 @@
         "".join([', "%s"' % (i,) for i in sha1]) +
         ') || abort("\\"%s\\" has unexpected contents.");' % (filename,))
 
+  def Verify(self, filename):
+    """Check that the given file (or MTD reference) has one of the
+    given hashes (encoded in the filename)."""
+    self.script.append(
+        'apply_patch_check("{filename}") && '
+        'ui_print("    Verified.") || '
+        'ui_print("\\"{filename}\\" has unexpected contents.");'.format(
+            filename=filename))
+
   def FileCheck(self, filename, *sha1):
     """Check that the given file (or MTD reference) has one of the
     given *sha1 hashes."""
@@ -163,7 +172,7 @@
     """Check that there's at least 'amount' space that can be made
     available on /cache."""
     self.script.append(('apply_patch_space(%d) || abort("Not enough free space '
-                        'on /system to apply patches.");') % (amount,))
+                        'on /cache to apply patches.");') % (amount,))
 
   def Mount(self, mount_point, mount_options_by_format=""):
     """Mount the partition with the given mount_point.
diff --git a/tools/releasetools/ota_from_target_files.py b/tools/releasetools/ota_from_target_files.py
index e5e4d74..fd57b93 100755
--- a/tools/releasetools/ota_from_target_files.py
+++ b/tools/releasetools/ota_from_target_files.py
@@ -42,10 +42,9 @@
       radio image. This option is only meaningful when -i is specified,
       because a full radio is always included in a full OTA if applicable.
 
- --full_bootloader
-      When generating an incremental OTA, always include a full copy of
-      bootloader image. This option is only meaningful when -i is specified,
-      because a full bootloader is always included in a full OTA if applicable.
+  --full_bootloader
+      Similar to --full_radio. When generating an incremental OTA, always
+      include a full copy of bootloader image.
 
   -v  (--verify)
       Remount and verify the checksums of the files written to the
@@ -92,6 +91,9 @@
   --stash_threshold <float>
       Specifies the threshold that will be used to compute the maximum
       allowed stash size (defaults to 0.8).
+
+  --gen_verify
+      Generate an OTA package that verifies the partitions.
 """
 
 import sys
@@ -134,6 +136,7 @@
 # Stash size cannot exceed cache_size * threshold.
 OPTIONS.cache_size = None
 OPTIONS.stash_threshold = 0.8
+OPTIONS.gen_verify = False
 
 def MostPopularKey(d, default):
   """Given a dict, return the key corresponding to the largest
@@ -148,12 +151,12 @@
 def IsSymlink(info):
   """Return true if the zipfile.ZipInfo object passed in represents a
   symlink."""
-  return (info.external_attr >> 16) == 0o120777
+  return (info.external_attr >> 16) & 0o770000 == 0o120000
 
 def IsRegular(info):
   """Return true if the zipfile.ZipInfo object passed in represents a
-  symlink."""
-  return (info.external_attr >> 28) == 0o10
+  regular file."""
+  return (info.external_attr >> 16) & 0o770000 == 0o100000
 
 def ClosestFileMatch(src, tgtfiles, existing):
   """Returns the closest file match between a source file and list
@@ -593,8 +596,8 @@
   if HasVendorPartition(input_zip):
     system_progress -= 0.1
 
-  # Place a copy of file_contexts into the OTA package which will be used by
-  # the recovery program.
+  # Place a copy of file_contexts.bin into the OTA package which will be used
+  # by the recovery program.
   if "selinux_fc" in OPTIONS.info_dict:
     WritePolicyConfig(OPTIONS.info_dict["selinux_fc"], output_zip)
 
@@ -735,6 +738,8 @@
 
 
 def WriteBlockIncrementalOTAPackage(target_zip, source_zip, output_zip):
+  # TODO(tbao): We should factor out the common parts between
+  # WriteBlockIncrementalOTAPackage() and WriteIncrementalOTAPackage().
   source_version = OPTIONS.source_info_dict["recovery_api_version"]
   target_version = OPTIONS.target_info_dict["recovery_api_version"]
 
@@ -745,9 +750,20 @@
       source_version, OPTIONS.target_info_dict,
       fstab=OPTIONS.source_info_dict["fstab"])
 
+  oem_props = OPTIONS.info_dict.get("oem_fingerprint_properties")
+  recovery_mount_options = OPTIONS.source_info_dict.get(
+      "recovery_mount_options")
+  oem_dict = None
+  if oem_props is not None and len(oem_props) > 0:
+    if OPTIONS.oem_source is None:
+      raise common.ExternalError("OEM source required for this build")
+    script.Mount("/oem", recovery_mount_options)
+    oem_dict = common.LoadDictionaryFromLines(
+        open(OPTIONS.oem_source).readlines())
+
   metadata = {
-      "pre-device": GetBuildProp("ro.product.device",
-                                 OPTIONS.source_info_dict),
+      "pre-device": GetOemProperty("ro.product.device", oem_props, oem_dict,
+                                   OPTIONS.source_info_dict),
       "post-timestamp": GetBuildProp("ro.build.date.utc",
                                      OPTIONS.target_info_dict),
   }
@@ -762,14 +778,10 @@
       metadata=metadata,
       info_dict=OPTIONS.source_info_dict)
 
-  # TODO: Currently this works differently from WriteIncrementalOTAPackage().
-  # This function doesn't consider thumbprints when writing
-  # metadata["pre/post-build"]. One possible reason is that the current
-  # devices with thumbprints are all using file-based OTAs. Long term we
-  # should factor out the common parts into a shared one to avoid further
-  # divergence.
-  source_fp = GetBuildProp("ro.build.fingerprint", OPTIONS.source_info_dict)
-  target_fp = GetBuildProp("ro.build.fingerprint", OPTIONS.target_info_dict)
+  source_fp = CalculateFingerprint(oem_props, oem_dict,
+                                   OPTIONS.source_info_dict)
+  target_fp = CalculateFingerprint(oem_props, oem_dict,
+                                   OPTIONS.target_info_dict)
   metadata["pre-build"] = source_fp
   metadata["post-build"] = target_fp
 
@@ -808,17 +820,6 @@
   else:
     vendor_diff = None
 
-  oem_props = OPTIONS.target_info_dict.get("oem_fingerprint_properties")
-  recovery_mount_options = OPTIONS.source_info_dict.get(
-      "recovery_mount_options")
-  oem_dict = None
-  if oem_props is not None and len(oem_props) > 0:
-    if OPTIONS.oem_source is None:
-      raise common.ExternalError("OEM source required for this build")
-    script.Mount("/oem", recovery_mount_options)
-    oem_dict = common.LoadDictionaryFromLines(
-        open(OPTIONS.oem_source).readlines())
-
   AppendAssertions(script, OPTIONS.target_info_dict, oem_dict)
   device_specific.IncrementalOTA_Assertions()
 
@@ -933,6 +934,7 @@
 
   system_diff.WriteScript(script, output_zip,
                           progress=0.8 if vendor_diff else 0.9)
+
   if vendor_diff:
     vendor_diff.WriteScript(script, output_zip, progress=0.1)
 
@@ -986,6 +988,79 @@
   WriteMetadata(metadata, output_zip)
 
 
+def WriteVerifyPackage(input_zip, output_zip):
+  script = edify_generator.EdifyGenerator(3, OPTIONS.info_dict)
+
+  oem_props = OPTIONS.info_dict.get("oem_fingerprint_properties")
+  recovery_mount_options = OPTIONS.info_dict.get(
+      "recovery_mount_options")
+  oem_dict = None
+  if oem_props is not None and len(oem_props) > 0:
+    if OPTIONS.oem_source is None:
+      raise common.ExternalError("OEM source required for this build")
+    script.Mount("/oem", recovery_mount_options)
+    oem_dict = common.LoadDictionaryFromLines(
+        open(OPTIONS.oem_source).readlines())
+
+  target_fp = CalculateFingerprint(oem_props, oem_dict, OPTIONS.info_dict)
+  metadata = {
+      "post-build": target_fp,
+      "pre-device": GetOemProperty("ro.product.device", oem_props, oem_dict,
+                                   OPTIONS.info_dict),
+      "post-timestamp": GetBuildProp("ro.build.date.utc", OPTIONS.info_dict),
+  }
+
+  device_specific = common.DeviceSpecificParams(
+      input_zip=input_zip,
+      input_version=OPTIONS.info_dict["recovery_api_version"],
+      output_zip=output_zip,
+      script=script,
+      input_tmp=OPTIONS.input_tmp,
+      metadata=metadata,
+      info_dict=OPTIONS.info_dict)
+
+  AppendAssertions(script, OPTIONS.info_dict, oem_dict)
+
+  script.Print("Verifying device images against %s..." % target_fp)
+  script.AppendExtra("")
+
+  script.Print("Verifying boot...")
+  boot_img = common.GetBootableImage(
+      "boot.img", "boot.img", OPTIONS.input_tmp, "BOOT")
+  boot_type, boot_device = common.GetTypeAndDevice(
+      "/boot", OPTIONS.info_dict)
+  script.Verify("%s:%s:%d:%s" % (
+      boot_type, boot_device, boot_img.size, boot_img.sha1))
+  script.AppendExtra("")
+
+  script.Print("Verifying recovery...")
+  recovery_img = common.GetBootableImage(
+      "recovery.img", "recovery.img", OPTIONS.input_tmp, "RECOVERY")
+  recovery_type, recovery_device = common.GetTypeAndDevice(
+      "/recovery", OPTIONS.info_dict)
+  script.Verify("%s:%s:%d:%s" % (
+      recovery_type, recovery_device, recovery_img.size, recovery_img.sha1))
+  script.AppendExtra("")
+
+  system_tgt = GetImage("system", OPTIONS.input_tmp, OPTIONS.info_dict)
+  system_tgt.ResetFileMap()
+  system_diff = common.BlockDifference("system", system_tgt, src=None)
+  system_diff.WriteStrictVerifyScript(script)
+
+  if HasVendorPartition(input_zip):
+    vendor_tgt = GetImage("vendor", OPTIONS.input_tmp, OPTIONS.info_dict)
+    vendor_tgt.ResetFileMap()
+    vendor_diff = common.BlockDifference("vendor", vendor_tgt, src=None)
+    vendor_diff.WriteStrictVerifyScript(script)
+
+  # Device specific partitions, such as radio, bootloader and etc.
+  device_specific.VerifyOTA_Assertions()
+
+  script.SetProgress(1.0)
+  script.AddToZip(input_zip, output_zip, input_path=OPTIONS.updater_binary)
+  WriteMetadata(metadata, output_zip)
+
+
 class FileDifference(object):
   def __init__(self, partition, source_zip, target_zip, output_zip):
     self.deferred_patch_list = None
@@ -1076,11 +1151,13 @@
       script.FileCheck(tf.name, tf.sha1)
 
   def RemoveUnneededFiles(self, script, extras=()):
-    script.DeleteFiles(
-        ["/" + i[0] for i in self.verbatim_targets] +
-        ["/" + i for i in sorted(self.source_data)
-         if i not in self.target_data and i not in self.renames] +
-        list(extras))
+    file_list = ["/" + i[0] for i in self.verbatim_targets]
+    file_list += ["/" + i for i in self.source_data
+                  if i not in self.target_data and i not in self.renames]
+    file_list += list(extras)
+    # Sort the list in descending order, which removes all the files first
+    # before attempting to remove the folder. (Bug: 22960996)
+    script.DeleteFiles(sorted(file_list, reverse=True))
 
   def TotalPatchSize(self):
     return sum(i[1].size for i in self.patch_list)
@@ -1552,6 +1629,8 @@
       except ValueError:
         raise ValueError("Cannot parse value %r for option %r - expecting "
                          "a float" % (a, o))
+    elif o == "--gen_verify":
+      OPTIONS.gen_verify = True
     else:
       return False
     return True
@@ -1577,6 +1656,7 @@
                                  "verify",
                                  "no_fallback_to_full",
                                  "stash_threshold=",
+                                 "gen_verify"
                              ], extra_option_handler=option_handler)
 
   if len(args) != 2:
@@ -1618,57 +1698,61 @@
     raise common.ExternalError(
         "--- target build has specified no recovery ---")
 
-  while True:
+  # Use the default key to sign the package if not specified with package_key.
+  if not OPTIONS.no_signing:
+    if OPTIONS.package_key is None:
+      OPTIONS.package_key = OPTIONS.info_dict.get(
+          "default_system_dev_certificate",
+          "build/target/product/security/testkey")
 
-    if OPTIONS.no_signing:
-      if os.path.exists(args[1]):
-        os.unlink(args[1])
-      output_zip = zipfile.ZipFile(args[1], "w",
-                                   compression=zipfile.ZIP_DEFLATED)
-    else:
-      temp_zip_file = tempfile.NamedTemporaryFile()
-      output_zip = zipfile.ZipFile(temp_zip_file, "w",
-                                   compression=zipfile.ZIP_DEFLATED)
+  # Set up the output zip. Create a temporary zip file if signing is needed.
+  if OPTIONS.no_signing:
+    if os.path.exists(args[1]):
+      os.unlink(args[1])
+    output_zip = zipfile.ZipFile(args[1], "w",
+                                 compression=zipfile.ZIP_DEFLATED)
+  else:
+    temp_zip_file = tempfile.NamedTemporaryFile()
+    output_zip = zipfile.ZipFile(temp_zip_file, "w",
+                                 compression=zipfile.ZIP_DEFLATED)
 
-    cache_size = OPTIONS.info_dict.get("cache_size", None)
-    if cache_size is None:
-      print "--- can't determine the cache partition size ---"
-    OPTIONS.cache_size = cache_size
+  cache_size = OPTIONS.info_dict.get("cache_size", None)
+  if cache_size is None:
+    print "--- can't determine the cache partition size ---"
+  OPTIONS.cache_size = cache_size
 
-    if OPTIONS.incremental_source is None:
+  # Generate a verify package.
+  if OPTIONS.gen_verify:
+    WriteVerifyPackage(input_zip, output_zip)
+
+  # Generate a full OTA.
+  elif OPTIONS.incremental_source is None:
+    WriteFullOTAPackage(input_zip, output_zip)
+
+  # Generate an incremental OTA. It will fall back to generate a full OTA on
+  # failure unless no_fallback_to_full is specified.
+  else:
+    print "unzipping source target-files..."
+    OPTIONS.source_tmp, source_zip = common.UnzipTemp(
+        OPTIONS.incremental_source)
+    OPTIONS.target_info_dict = OPTIONS.info_dict
+    OPTIONS.source_info_dict = common.LoadInfoDict(source_zip,
+                                                   OPTIONS.source_tmp)
+    if OPTIONS.verbose:
+      print "--- source info ---"
+      common.DumpInfoDict(OPTIONS.source_info_dict)
+    try:
+      WriteIncrementalOTAPackage(input_zip, source_zip, output_zip)
+    except ValueError:
+      if not OPTIONS.fallback_to_full:
+        raise
+      print "--- failed to build incremental; falling back to full ---"
+      OPTIONS.incremental_source = None
       WriteFullOTAPackage(input_zip, output_zip)
-      if OPTIONS.package_key is None:
-        OPTIONS.package_key = OPTIONS.info_dict.get(
-            "default_system_dev_certificate",
-            "build/target/product/security/testkey")
-      common.ZipClose(output_zip)
-      break
 
-    else:
-      print "unzipping source target-files..."
-      OPTIONS.source_tmp, source_zip = common.UnzipTemp(
-          OPTIONS.incremental_source)
-      OPTIONS.target_info_dict = OPTIONS.info_dict
-      OPTIONS.source_info_dict = common.LoadInfoDict(source_zip,
-                                                     OPTIONS.source_tmp)
-      if OPTIONS.package_key is None:
-        OPTIONS.package_key = OPTIONS.source_info_dict.get(
-            "default_system_dev_certificate",
-            "build/target/product/security/testkey")
-      if OPTIONS.verbose:
-        print "--- source info ---"
-        common.DumpInfoDict(OPTIONS.source_info_dict)
-      try:
-        WriteIncrementalOTAPackage(input_zip, source_zip, output_zip)
-        common.ZipClose(output_zip)
-        break
-      except ValueError:
-        if not OPTIONS.fallback_to_full:
-          raise
-        print "--- failed to build incremental; falling back to full ---"
-        OPTIONS.incremental_source = None
-        common.ZipClose(output_zip)
+  common.ZipClose(output_zip)
 
+  # Sign the generated zip package unless no_signing is specified.
   if not OPTIONS.no_signing:
     SignOutput(temp_zip_file.name, args[1])
     temp_zip_file.close()
diff --git a/tools/releasetools/rangelib.py b/tools/releasetools/rangelib.py
index 373bbed..975a48a 100644
--- a/tools/releasetools/rangelib.py
+++ b/tools/releasetools/rangelib.py
@@ -24,12 +24,13 @@
   lots of runs."""
 
   def __init__(self, data=None):
-    # TODO(tbao): monotonic is broken when passing in a tuple.
     self.monotonic = False
     if isinstance(data, str):
       self._parse_internal(data)
     elif data:
+      assert len(data) % 2 == 0
       self.data = tuple(self._remove_pairs(data))
+      self.monotonic = all(x < y for x, y in zip(self.data, self.data[1:]))
     else:
       self.data = ()
 
@@ -39,8 +40,10 @@
 
   def __eq__(self, other):
     return self.data == other.data
+
   def __ne__(self, other):
     return self.data != other.data
+
   def __nonzero__(self):
     return bool(self.data)
 
@@ -74,9 +77,9 @@
     monotonic = True
     for p in text.split():
       if "-" in p:
-        s, e = p.split("-")
-        data.append(int(s))
-        data.append(int(e)+1)
+        s, e = (int(x) for x in p.split("-"))
+        data.append(s)
+        data.append(e+1)
         if last <= s <= e:
           last = e
         else:
@@ -95,6 +98,9 @@
 
   @staticmethod
   def _remove_pairs(source):
+    """Remove consecutive duplicate items to simplify the result.
+
+    [1, 2, 2, 5, 5, 10] will become [1, 10]."""
     last = None
     for i in source:
       if i == last:
@@ -117,6 +123,7 @@
     return " ".join(out)
 
   def to_string_raw(self):
+    assert self.data
     return str(len(self.data)) + "," + ",".join(str(i) for i in self.data)
 
   def union(self, other):
diff --git a/tools/releasetools/test_rangelib.py b/tools/releasetools/test_rangelib.py
new file mode 100644
index 0000000..7debe66
--- /dev/null
+++ b/tools/releasetools/test_rangelib.py
@@ -0,0 +1,125 @@
+#
+# Copyright (C) 2015 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+import unittest
+
+from rangelib import RangeSet
+
+class RangeSetTest(unittest.TestCase):
+
+  def test_union(self):
+    self.assertEqual(RangeSet("10-19 30-34").union(RangeSet("18-29")),
+                     RangeSet("10-34"))
+    self.assertEqual(RangeSet("10-19 30-34").union(RangeSet("22 32")),
+                     RangeSet("10-19 22 30-34"))
+
+  def test_intersect(self):
+    self.assertEqual(RangeSet("10-19 30-34").intersect(RangeSet("18-32")),
+                     RangeSet("18-19 30-32"))
+    self.assertEqual(RangeSet("10-19 30-34").intersect(RangeSet("22-28")),
+                     RangeSet(""))
+
+  def test_subtract(self):
+    self.assertEqual(RangeSet("10-19 30-34").subtract(RangeSet("18-32")),
+                     RangeSet("10-17 33-34"))
+    self.assertEqual(RangeSet("10-19 30-34").subtract(RangeSet("22-28")),
+                     RangeSet("10-19 30-34"))
+
+  def test_overlaps(self):
+    self.assertTrue(RangeSet("10-19 30-34").overlaps(RangeSet("18-32")))
+    self.assertFalse(RangeSet("10-19 30-34").overlaps(RangeSet("22-28")))
+
+  def test_size(self):
+    self.assertEqual(RangeSet("10-19 30-34").size(), 15)
+    self.assertEqual(RangeSet("").size(), 0)
+
+  def test_map_within(self):
+    self.assertEqual(RangeSet("0-9").map_within(RangeSet("3-4")),
+                     RangeSet("3-4"))
+    self.assertEqual(RangeSet("10-19").map_within(RangeSet("13-14")),
+                     RangeSet("3-4"))
+    self.assertEqual(
+        RangeSet("10-19 30-39").map_within(RangeSet("17-19 30-32")),
+        RangeSet("7-12"))
+    self.assertEqual(
+        RangeSet("10-19 30-39").map_within(RangeSet("12-13 17-19 30-32")),
+        RangeSet("2-3 7-12"))
+
+  def test_first(self):
+    self.assertEqual(RangeSet("0-9").first(1), RangeSet("0"))
+    self.assertEqual(RangeSet("10-19").first(5), RangeSet("10-14"))
+    self.assertEqual(RangeSet("10-19").first(15), RangeSet("10-19"))
+    self.assertEqual(RangeSet("10-19 30-39").first(3), RangeSet("10-12"))
+    self.assertEqual(RangeSet("10-19 30-39").first(15),
+                     RangeSet("10-19 30-34"))
+    self.assertEqual(RangeSet("10-19 30-39").first(30),
+                     RangeSet("10-19 30-39"))
+    self.assertEqual(RangeSet("0-9").first(0), RangeSet(""))
+
+  def test_extend(self):
+    self.assertEqual(RangeSet("0-9").extend(1), RangeSet("0-10"))
+    self.assertEqual(RangeSet("10-19").extend(15), RangeSet("0-34"))
+    self.assertEqual(RangeSet("10-19 30-39").extend(4), RangeSet("6-23 26-43"))
+    self.assertEqual(RangeSet("10-19 30-39").extend(10), RangeSet("0-49"))
+
+  def test_equality(self):
+    self.assertTrue(RangeSet("") == RangeSet(""))
+    self.assertTrue(RangeSet("3") == RangeSet("3"))
+    self.assertTrue(RangeSet("3 5") == RangeSet("5 3"))
+    self.assertTrue(
+        RangeSet("10-19 30-39") == RangeSet("30-32 10-14 33-39 15-19"))
+    self.assertTrue(RangeSet("") != RangeSet("3"))
+    self.assertTrue(RangeSet("10-19") != RangeSet("10-19 20"))
+
+    self.assertFalse(RangeSet(""))
+    self.assertTrue(RangeSet("3"))
+
+  def test_init(self):
+    self.assertIsNotNone(RangeSet(""))
+    self.assertIsNotNone(RangeSet("3"))
+    self.assertIsNotNone(RangeSet("3 5"))
+    self.assertIsNotNone(RangeSet("10 19 30-39"))
+
+    with self.assertRaises(AssertionError):
+      RangeSet(data=[0])
+
+  def test_str(self):
+    self.assertEqual(str(RangeSet("0-9")), "0-9")
+    self.assertEqual(str(RangeSet("2-10 12")), "2-10 12")
+    self.assertEqual(str(RangeSet("11 2-10 12 1 0")), "0-12")
+    self.assertEqual(str(RangeSet("")), "empty")
+
+  def test_to_string_raw(self):
+    self.assertEqual(RangeSet("0-9").to_string_raw(), "2,0,10")
+    self.assertEqual(RangeSet("2-10 12").to_string_raw(), "4,2,11,12,13")
+    self.assertEqual(RangeSet("11 2-10 12 1 0").to_string_raw(), "2,0,13")
+
+    with self.assertRaises(AssertionError):
+      RangeSet("").to_string_raw()
+
+  def test_monotonic(self):
+    self.assertTrue(RangeSet("0-9").monotonic)
+    self.assertTrue(RangeSet("2-9").monotonic)
+    self.assertTrue(RangeSet("2-9 30 31 35").monotonic)
+    self.assertTrue(RangeSet("").monotonic)
+    self.assertTrue(RangeSet("0-4 5-9").monotonic)
+    self.assertFalse(RangeSet("5-9 0-4").monotonic)
+
+    self.assertTrue(RangeSet(data=[0, 10]).monotonic)
+    self.assertTrue(RangeSet(data=[0, 10, 15, 20]).monotonic)
+    self.assertTrue(RangeSet(data=[2, 9, 30, 31, 31, 32, 35, 36]).monotonic)
+    self.assertTrue(RangeSet(data=[0, 5, 5, 10]).monotonic)
+    self.assertFalse(RangeSet(data=[5, 10, 0, 5]).monotonic)
diff --git a/tools/signapk/SignApk.java b/tools/signapk/SignApk.java
index 88f486a..3ddab11 100644
--- a/tools/signapk/SignApk.java
+++ b/tools/signapk/SignApk.java
@@ -167,18 +167,29 @@
     }
 
     /**
-     * Reads the password from console and returns it as a string.
+     * If a console doesn't exist, reads the password from stdin
+     * If a console exists, reads the password from console and returns it as a string.
      *
      * @param keyFile The file containing the private key.  Used to prompt the user.
      */
     private static String readPassword(File keyFile) {
         Console console;
         char[] pwd;
-        if((console = System.console()) != null &&
-           (pwd = console.readPassword("[%s]", "Enter password for " + keyFile)) != null){
-            return String.valueOf(pwd);
+        if ((console = System.console()) == null) {
+            System.out.print("Enter password for " + keyFile + " (password will not be hidden): ");
+            System.out.flush();
+            BufferedReader stdin = new BufferedReader(new InputStreamReader(System.in));
+            try {
+                return stdin.readLine();
+            } catch (IOException ex) {
+                return null;
+            }
         } else {
-            return null;
+            if ((pwd = console.readPassword("[%s]", "Enter password for " + keyFile)) != null) {
+                return String.valueOf(pwd);
+            } else {
+                return null;
+            }
         }
     }
 
diff --git a/tools/target_files_diff.py b/tools/target_files_diff.py
new file mode 100755
index 0000000..010ea84
--- /dev/null
+++ b/tools/target_files_diff.py
@@ -0,0 +1,224 @@
+#!/usr/bin/env python
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+#
+# Finds differences between two target files packages
+#
+
+from __future__ import print_function
+
+import argparse
+import contextlib
+import os
+import re
+import subprocess
+import tempfile
+
+def ignore(name):
+  """
+  Files to ignore when diffing
+
+  These are packages that we're already diffing elsewhere,
+  or files that we expect to be different for every build,
+  or known problems.
+  """
+
+  # We're looking at the files that make the images, so no need to search them
+  if name in ['IMAGES']:
+    return True
+  # These are packages of the recovery partition, which we're already diffing
+  if name in ['SYSTEM/etc/recovery-resource.dat',
+              'SYSTEM/recovery-from-boot.p']:
+    return True
+
+  # These files are just the BUILD_NUMBER, and will always be different
+  if name in ['BOOT/RAMDISK/selinux_version',
+              'RECOVERY/RAMDISK/selinux_version']:
+    return True
+
+  # b/24201956 .art/.oat/.odex files are different with every build
+  if name.endswith('.art') or name.endswith('.oat') or name.endswith('.odex'):
+    return True
+  # b/25348136 libpac.so changes with every build
+  if name in ['SYSTEM/lib/libpac.so',
+              'SYSTEM/lib64/libpac.so']:
+    return True
+
+  return False
+
+
+def rewrite_build_property(original, new):
+  """
+  Rewrite property files to remove values known to change for every build
+  """
+
+  skipped = ['ro.bootimage.build.date=',
+             'ro.bootimage.build.date.utc=',
+             'ro.bootimage.build.fingerprint=',
+             'ro.build.id=',
+             'ro.build.display.id=',
+             'ro.build.version.incremental=',
+             'ro.build.date=',
+             'ro.build.date.utc=',
+             'ro.build.host=',
+             'ro.build.description=',
+             'ro.build.fingerprint=',
+             'ro.expect.recovery_id=',
+             'ro.vendor.build.date=',
+             'ro.vendor.build.date.utc=',
+             'ro.vendor.build.fingerprint=']
+
+  for line in original:
+    skip = False
+    for s in skipped:
+      if line.startswith(s):
+        skip = True
+        break
+    if not skip:
+      new.write(line)
+
+
+def trim_install_recovery(original, new):
+  """
+  Rewrite the install-recovery script to remove the hash of the recovery partition.
+  """
+  for line in original:
+    new.write(re.sub(r'[0-9a-f]{40}', '0'*40, line))
+
+def sort_file(original, new):
+  """
+  Sort the file. Some OTA metadata files are not in a deterministic order currently.
+  """
+  lines = original.readlines()
+  lines.sort()
+  for line in lines:
+    new.write(line)
+
+# Map files to the functions that will modify them for diffing
+REWRITE_RULES = {
+    'BOOT/RAMDISK/default.prop': rewrite_build_property,
+    'RECOVERY/RAMDISK/default.prop': rewrite_build_property,
+    'SYSTEM/build.prop': rewrite_build_property,
+    'VENDOR/build.prop': rewrite_build_property,
+
+    'SYSTEM/bin/install-recovery.sh': trim_install_recovery,
+
+    'META/boot_filesystem_config.txt': sort_file,
+    'META/filesystem_config.txt': sort_file,
+    'META/recovery_filesystem_config.txt': sort_file,
+    'META/vendor_filesystem_config.txt': sort_file,
+}
+
+@contextlib.contextmanager
+def preprocess(name, filename):
+  """
+  Optionally rewrite files before diffing them, to remove known-variable information.
+  """
+  if name in REWRITE_RULES:
+    with tempfile.NamedTemporaryFile() as newfp:
+      with open(filename, 'r') as oldfp:
+        REWRITE_RULES[name](oldfp, newfp)
+      newfp.flush()
+      yield newfp.name
+  else:
+    yield filename
+
+def diff(name, file1, file2):
+  """
+  Diff a file pair with diff, running preprocess() on the arguments first.
+  """
+  with preprocess(name, file1) as f1:
+    with preprocess(name, file2) as f2:
+      proc = subprocess.Popen(['diff', f1, f2], stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+      (stdout, ignore) = proc.communicate()
+      if proc.returncode == 0:
+        return
+      stdout = stdout.strip()
+      if stdout == 'Binary files %s and %s differ' % (f1, f2):
+        print("%s: Binary files differ" % name)
+      else:
+        for line in stdout.strip().split('\n'):
+          print("%s: %s" % (name, line))
+
+def recursiveDiff(prefix, dir1, dir2):
+  """
+  Recursively diff two directories, checking metadata then calling diff()
+  """
+  list1 = sorted(os.listdir(dir1))
+  list2 = sorted(os.listdir(dir2))
+
+  for entry in list1:
+    name = os.path.join(prefix, entry)
+    name1 = os.path.join(dir1, entry)
+    name2 = os.path.join(dir2, entry)
+
+    if ignore(name):
+      continue
+
+    if entry in list2:
+      if os.path.islink(name1):
+        if os.path.islink(name2):
+          link1 = os.readlink(name1)
+          link2 = os.readlink(name2)
+          if link1 != link2:
+            print("%s: Symlinks differ: %s vs %s" % (name, link1, link2))
+        else:
+          print("%s: File types differ, skipping compare" % name)
+        continue
+
+      stat1 = os.stat(name1)
+      stat2 = os.stat(name2)
+      type1 = stat1.st_mode & ~0777
+      type2 = stat2.st_mode & ~0777
+
+      if type1 != type2:
+        print("%s: File types differ, skipping compare" % name)
+        continue
+
+      if stat1.st_mode != stat2.st_mode:
+        print("%s: Modes differ: %o vs %o" % (name, stat1.st_mode, stat2.st_mode))
+
+      if os.path.isdir(name1):
+        recursiveDiff(name, name1, name2)
+      elif os.path.isfile(name1):
+        diff(name, name1, name2)
+      else:
+        print("%s: Unknown file type, skipping compare" % name)
+    else:
+      print("%s: Only in base package" % name)
+
+  for entry in list2:
+    name = os.path.join(prefix, entry)
+    name1 = os.path.join(dir1, entry)
+    name2 = os.path.join(dir2, entry)
+
+    if ignore(name):
+      continue
+
+    if entry not in list1:
+      print("%s: Only in new package" % name)
+
+def main():
+  parser = argparse.ArgumentParser()
+  parser.add_argument('dir1', help='The base target files package (extracted)')
+  parser.add_argument('dir2', help='The new target files package (extracted)')
+  args = parser.parse_args()
+
+  recursiveDiff('', args.dir1, args.dir2)
+
+if __name__ == '__main__':
+  main()
diff --git a/tools/zipalign/Android.mk b/tools/zipalign/Android.mk
index 4194f81..8c0240a 100644
--- a/tools/zipalign/Android.mk
+++ b/tools/zipalign/Android.mk
@@ -22,20 +22,17 @@
 	liblog \
 	libzopfli
 
-ifeq ($(HOST_OS),linux)
-LOCAL_LDLIBS += -lrt
-endif
+LOCAL_LDLIBS_linux += -lrt
 
-ifdef USE_MINGW
-LOCAL_STATIC_LIBRARIES += libz
-else
-LOCAL_LDLIBS += -lz
-endif
+LOCAL_STATIC_LIBRARIES_windows += libz
+LOCAL_LDLIBS_linux += -lz
+LOCAL_LDLIBS_darwin += -lz
 
 ifneq ($(strip $(BUILD_HOST_static)),)
 LOCAL_LDLIBS += -lpthread
 endif # BUILD_HOST_static
 
 LOCAL_MODULE := zipalign
+LOCAL_MODULE_HOST_OS := darwin linux windows
 
 include $(BUILD_HOST_EXECUTABLE)
diff --git a/tools/zipalign/ZipEntry.cpp b/tools/zipalign/ZipEntry.cpp
index b2270cb..a13b8d1 100644
--- a/tools/zipalign/ZipEntry.cpp
+++ b/tools/zipalign/ZipEntry.cpp
@@ -26,6 +26,7 @@
 #include <stdio.h>
 #include <string.h>
 #include <assert.h>
+#include <inttypes.h>
 
 using namespace android;
 
@@ -56,7 +57,7 @@
     /* using the info in the CDE, go load up the LFH */
     posn = ftell(fp);
     if (fseek(fp, mCDE.mLocalHeaderRelOffset, SEEK_SET) != 0) {
-        ALOGD("local header seek failed (%ld)\n",
+        ALOGD("local header seek failed (%" PRIu32 ")\n",
             mCDE.mLocalHeaderRelOffset);
         return UNKNOWN_ERROR;
     }
@@ -123,12 +124,12 @@
     mCDE.mExternalAttrs = 0x81b60020;   // matches what WinZip does
 
     if (mCDE.mFileNameLength > 0) {
-        mCDE.mFileName = new unsigned char[mCDE.mFileNameLength+1];
+        mCDE.mFileName = new uint8_t[mCDE.mFileNameLength+1];
         strcpy((char*) mCDE.mFileName, fileName);
     }
     if (mCDE.mFileCommentLength > 0) {
         /* TODO: stop assuming null-terminated ASCII here? */
-        mCDE.mFileComment = new unsigned char[mCDE.mFileCommentLength+1];
+        mCDE.mFileComment = new uint8_t[mCDE.mFileCommentLength+1];
         strcpy((char*) mCDE.mFileComment, comment);
     }
 
@@ -150,20 +151,20 @@
     memcpy(&mCDE, &pEntry->mCDE, sizeof(mCDE));
 
     if (mCDE.mFileNameLength > 0) {
-        mCDE.mFileName = new unsigned char[mCDE.mFileNameLength+1];
+        mCDE.mFileName = new uint8_t[mCDE.mFileNameLength+1];
         if (mCDE.mFileName == NULL)
             return NO_MEMORY;
         strcpy((char*) mCDE.mFileName, (char*)pEntry->mCDE.mFileName);
     }
     if (mCDE.mFileCommentLength > 0) {
-        mCDE.mFileComment = new unsigned char[mCDE.mFileCommentLength+1];
+        mCDE.mFileComment = new uint8_t[mCDE.mFileCommentLength+1];
         if (mCDE.mFileComment == NULL)
             return NO_MEMORY;
         strcpy((char*) mCDE.mFileComment, (char*)pEntry->mCDE.mFileComment);
     }
     if (mCDE.mExtraFieldLength > 0) {
         /* we null-terminate this, though it may not be a string */
-        mCDE.mExtraField = new unsigned char[mCDE.mExtraFieldLength+1];
+        mCDE.mExtraField = new uint8_t[mCDE.mExtraFieldLength+1];
         if (mCDE.mExtraField == NULL)
             return NO_MEMORY;
         memcpy(mCDE.mExtraField, pEntry->mCDE.mExtraField,
@@ -180,7 +181,7 @@
     assert(mLFH.mExtraField == NULL);
     mLFH.mExtraFieldLength = pEntry->mLFH.mExtraFieldLength;
     if (mLFH.mExtraFieldLength > 0) {
-        mLFH.mExtraField = new unsigned char[mLFH.mExtraFieldLength+1];
+        mLFH.mExtraField = new uint8_t[mLFH.mExtraFieldLength+1];
         if (mLFH.mExtraField == NULL)
             return NO_MEMORY;
         memcpy(mLFH.mExtraField, pEntry->mLFH.mExtraField,
@@ -205,9 +206,9 @@
 
     if (mLFH.mExtraFieldLength > 0) {
         /* extend existing field */
-        unsigned char* newExtra;
+        uint8_t* newExtra;
 
-        newExtra = new unsigned char[mLFH.mExtraFieldLength + padding];
+        newExtra = new uint8_t[mLFH.mExtraFieldLength + padding];
         if (newExtra == NULL)
             return NO_MEMORY;
         memset(newExtra + mLFH.mExtraFieldLength, 0, padding);
@@ -218,7 +219,7 @@
         mLFH.mExtraFieldLength += padding;
     } else {
         /* create new field */
-        mLFH.mExtraField = new unsigned char[padding];
+        mLFH.mExtraField = new uint8_t[padding];
         memset(mLFH.mExtraField, 0, padding);
         mLFH.mExtraFieldLength = padding;
     }
@@ -246,7 +247,7 @@
 
     delete[] mLFH.mFileName;
     if (mLFH.mFileNameLength > 0) {
-        mLFH.mFileName = new unsigned char[mLFH.mFileNameLength+1];
+        mLFH.mFileName = new uint8_t[mLFH.mFileNameLength+1];
         strcpy((char*) mLFH.mFileName, (const char*) mCDE.mFileName);
     } else {
         mLFH.mFileName = NULL;
@@ -256,7 +257,7 @@
 /*
  * Set some information about a file after we add it.
  */
-void ZipEntry::setDataInfo(long uncompLen, long compLen, unsigned long crc32,
+void ZipEntry::setDataInfo(long uncompLen, long compLen, uint32_t crc32,
     int compressionMethod)
 {
     mCDE.mCompressionMethod = compressionMethod;
@@ -360,7 +361,7 @@
     struct tm tmResult;
 #endif
     time_t even;
-    unsigned short zdate, ztime;
+    uint16_t zdate, ztime;
 
     struct tm* ptm;
 
@@ -402,7 +403,7 @@
 status_t ZipEntry::LocalFileHeader::read(FILE* fp)
 {
     status_t result = NO_ERROR;
-    unsigned char buf[kLFHLen];
+    uint8_t buf[kLFHLen];
 
     assert(mFileName == NULL);
     assert(mExtraField == NULL);
@@ -433,7 +434,7 @@
 
     /* grab filename */
     if (mFileNameLength != 0) {
-        mFileName = new unsigned char[mFileNameLength+1];
+        mFileName = new uint8_t[mFileNameLength+1];
         if (mFileName == NULL) {
             result = NO_MEMORY;
             goto bail;
@@ -447,7 +448,7 @@
 
     /* grab extra field */
     if (mExtraFieldLength != 0) {
-        mExtraField = new unsigned char[mExtraFieldLength+1];
+        mExtraField = new uint8_t[mExtraFieldLength+1];
         if (mExtraField == NULL) {
             result = NO_MEMORY;
             goto bail;
@@ -468,7 +469,7 @@
  */
 status_t ZipEntry::LocalFileHeader::write(FILE* fp)
 {
-    unsigned char buf[kLFHLen];
+    uint8_t buf[kLFHLen];
 
     ZipEntry::putLongLE(&buf[0x00], kSignature);
     ZipEntry::putShortLE(&buf[0x04], mVersionToExtract);
@@ -507,13 +508,13 @@
 void ZipEntry::LocalFileHeader::dump(void) const
 {
     ALOGD(" LocalFileHeader contents:\n");
-    ALOGD("  versToExt=%u gpBits=0x%04x compression=%u\n",
+    ALOGD("  versToExt=%" PRIu16 " gpBits=0x%04" PRIx16 " compression=%" PRIu16 "\n",
         mVersionToExtract, mGPBitFlag, mCompressionMethod);
-    ALOGD("  modTime=0x%04x modDate=0x%04x crc32=0x%08lx\n",
+    ALOGD("  modTime=0x%04" PRIx16 " modDate=0x%04" PRIx16 " crc32=0x%08" PRIx32 "\n",
         mLastModFileTime, mLastModFileDate, mCRC32);
-    ALOGD("  compressedSize=%lu uncompressedSize=%lu\n",
+    ALOGD("  compressedSize=%" PRIu32 " uncompressedSize=%" PRIu32 "\n",
         mCompressedSize, mUncompressedSize);
-    ALOGD("  filenameLen=%u extraLen=%u\n",
+    ALOGD("  filenameLen=%" PRIu16 " extraLen=%" PRIu16 "\n",
         mFileNameLength, mExtraFieldLength);
     if (mFileName != NULL)
         ALOGD("  filename: '%s'\n", mFileName);
@@ -536,7 +537,7 @@
 status_t ZipEntry::CentralDirEntry::read(FILE* fp)
 {
     status_t result = NO_ERROR;
-    unsigned char buf[kCDELen];
+    uint8_t buf[kCDELen];
 
     /* no re-use */
     assert(mFileName == NULL);
@@ -575,7 +576,7 @@
 
     /* grab filename */
     if (mFileNameLength != 0) {
-        mFileName = new unsigned char[mFileNameLength+1];
+        mFileName = new uint8_t[mFileNameLength+1];
         if (mFileName == NULL) {
             result = NO_MEMORY;
             goto bail;
@@ -589,7 +590,7 @@
 
     /* read "extra field" */
     if (mExtraFieldLength != 0) {
-        mExtraField = new unsigned char[mExtraFieldLength+1];
+        mExtraField = new uint8_t[mExtraFieldLength+1];
         if (mExtraField == NULL) {
             result = NO_MEMORY;
             goto bail;
@@ -604,7 +605,7 @@
 
     /* grab comment, if any */
     if (mFileCommentLength != 0) {
-        mFileComment = new unsigned char[mFileCommentLength+1];
+        mFileComment = new uint8_t[mFileCommentLength+1];
         if (mFileComment == NULL) {
             result = NO_MEMORY;
             goto bail;
@@ -626,7 +627,7 @@
  */
 status_t ZipEntry::CentralDirEntry::write(FILE* fp)
 {
-    unsigned char buf[kCDELen];
+    uint8_t buf[kCDELen];
 
     ZipEntry::putLongLE(&buf[0x00], kSignature);
     ZipEntry::putShortLE(&buf[0x04], mVersionMadeBy);
@@ -676,15 +677,15 @@
 void ZipEntry::CentralDirEntry::dump(void) const
 {
     ALOGD(" CentralDirEntry contents:\n");
-    ALOGD("  versMadeBy=%u versToExt=%u gpBits=0x%04x compression=%u\n",
+    ALOGD("  versMadeBy=%" PRIu16 " versToExt=%" PRIu16 " gpBits=0x%04" PRIx16 " compression=%" PRIu16 "\n",
         mVersionMadeBy, mVersionToExtract, mGPBitFlag, mCompressionMethod);
-    ALOGD("  modTime=0x%04x modDate=0x%04x crc32=0x%08lx\n",
+    ALOGD("  modTime=0x%04" PRIx16 " modDate=0x%04" PRIx16 " crc32=0x%08" PRIx32 "\n",
         mLastModFileTime, mLastModFileDate, mCRC32);
-    ALOGD("  compressedSize=%lu uncompressedSize=%lu\n",
+    ALOGD("  compressedSize=%" PRIu32 " uncompressedSize=%" PRIu32 "\n",
         mCompressedSize, mUncompressedSize);
-    ALOGD("  filenameLen=%u extraLen=%u commentLen=%u\n",
+    ALOGD("  filenameLen=%" PRIu16 " extraLen=%" PRIu16 " commentLen=%" PRIu16 "\n",
         mFileNameLength, mExtraFieldLength, mFileCommentLength);
-    ALOGD("  diskNumStart=%u intAttr=0x%04x extAttr=0x%08lx relOffset=%lu\n",
+    ALOGD("  diskNumStart=%" PRIu16 " intAttr=0x%04" PRIx16 " extAttr=0x%08" PRIx32 " relOffset=%" PRIu32 "\n",
         mDiskNumberStart, mInternalAttrs, mExternalAttrs,
         mLocalHeaderRelOffset);
 
diff --git a/tools/zipalign/ZipEntry.h b/tools/zipalign/ZipEntry.h
index 7f721b4..129a759 100644
--- a/tools/zipalign/ZipEntry.h
+++ b/tools/zipalign/ZipEntry.h
@@ -25,6 +25,7 @@
 #include <utils/Errors.h>
 
 #include <stdlib.h>
+#include <stdint.h>
 #include <stdio.h>
 
 namespace android {
@@ -85,7 +86,7 @@
     /*
      * Return the data CRC.
      */
-    unsigned long getCRC32(void) const { return mCDE.mCRC32; }
+    uint32_t getCRC32(void) const { return mCDE.mCRC32; }
 
     /*
      * Return file modification time in UNIX seconds-since-epoch.
@@ -108,21 +109,21 @@
      * Some basic functions for raw data manipulation.  "LE" means
      * Little Endian.
      */
-    static inline unsigned short getShortLE(const unsigned char* buf) {
+    static inline uint16_t getShortLE(const uint8_t* buf) {
         return buf[0] | (buf[1] << 8);
     }
-    static inline unsigned long getLongLE(const unsigned char* buf) {
+    static inline uint32_t getLongLE(const uint8_t* buf) {
         return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
     }
-    static inline void putShortLE(unsigned char* buf, short val) {
-        buf[0] = (unsigned char) val;
-        buf[1] = (unsigned char) (val >> 8);
+    static inline void putShortLE(uint8_t* buf, uint16_t val) {
+        buf[0] = (uint8_t) val;
+        buf[1] = (uint8_t) (val >> 8);
     }
-    static inline void putLongLE(unsigned char* buf, long val) {
-        buf[0] = (unsigned char) val;
-        buf[1] = (unsigned char) (val >> 8);
-        buf[2] = (unsigned char) (val >> 16);
-        buf[3] = (unsigned char) (val >> 24);
+    static inline void putLongLE(uint8_t* buf, uint32_t val) {
+        buf[0] = (uint8_t) val;
+        buf[1] = (uint8_t) (val >> 8);
+        buf[2] = (uint8_t) (val >> 16);
+        buf[3] = (uint8_t) (val >> 24);
     }
 
     /* defined for Zip archives */
@@ -177,7 +178,7 @@
     /*
      * Set information about the data for this entry.
      */
-    void setDataInfo(long uncompLen, long compLen, unsigned long crc32,
+    void setDataInfo(long uncompLen, long compLen, uint32_t crc32,
         int compressionMethod);
 
     /*
@@ -195,7 +196,7 @@
      * the current file.
      */
     void setLFHOffset(off_t offset) {
-        mCDE.mLocalHeaderRelOffset = (long) offset;
+        mCDE.mLocalHeaderRelOffset = (uint32_t) offset;
     }
 
     /* mark for deletion; used by ZipFile::remove() */
@@ -240,19 +241,19 @@
         status_t read(FILE* fp);
         status_t write(FILE* fp);
 
-        // unsigned long mSignature;
-        unsigned short  mVersionToExtract;
-        unsigned short  mGPBitFlag;
-        unsigned short  mCompressionMethod;
-        unsigned short  mLastModFileTime;
-        unsigned short  mLastModFileDate;
-        unsigned long   mCRC32;
-        unsigned long   mCompressedSize;
-        unsigned long   mUncompressedSize;
-        unsigned short  mFileNameLength;
-        unsigned short  mExtraFieldLength;
-        unsigned char*  mFileName;
-        unsigned char*  mExtraField;
+        // uint32_t mSignature;
+        uint16_t mVersionToExtract;
+        uint16_t mGPBitFlag;
+        uint16_t mCompressionMethod;
+        uint16_t mLastModFileTime;
+        uint16_t mLastModFileDate;
+        uint32_t mCRC32;
+        uint32_t mCompressedSize;
+        uint32_t mUncompressedSize;
+        uint16_t mFileNameLength;
+        uint16_t mExtraFieldLength;
+        uint8_t* mFileName;
+        uint8_t* mExtraField;
 
         enum {
             kSignature      = 0x04034b50,
@@ -298,26 +299,26 @@
         status_t read(FILE* fp);
         status_t write(FILE* fp);
 
-        // unsigned long mSignature;
-        unsigned short  mVersionMadeBy;
-        unsigned short  mVersionToExtract;
-        unsigned short  mGPBitFlag;
-        unsigned short  mCompressionMethod;
-        unsigned short  mLastModFileTime;
-        unsigned short  mLastModFileDate;
-        unsigned long   mCRC32;
-        unsigned long   mCompressedSize;
-        unsigned long   mUncompressedSize;
-        unsigned short  mFileNameLength;
-        unsigned short  mExtraFieldLength;
-        unsigned short  mFileCommentLength;
-        unsigned short  mDiskNumberStart;
-        unsigned short  mInternalAttrs;
-        unsigned long   mExternalAttrs;
-        unsigned long   mLocalHeaderRelOffset;
-        unsigned char*  mFileName;
-        unsigned char*  mExtraField;
-        unsigned char*  mFileComment;
+        // uint32_t mSignature;
+        uint16_t mVersionMadeBy;
+        uint16_t mVersionToExtract;
+        uint16_t mGPBitFlag;
+        uint16_t mCompressionMethod;
+        uint16_t mLastModFileTime;
+        uint16_t mLastModFileDate;
+        uint32_t mCRC32;
+        uint32_t mCompressedSize;
+        uint32_t mUncompressedSize;
+        uint16_t mFileNameLength;
+        uint16_t mExtraFieldLength;
+        uint16_t mFileCommentLength;
+        uint16_t mDiskNumberStart;
+        uint16_t mInternalAttrs;
+        uint32_t mExternalAttrs;
+        uint32_t mLocalHeaderRelOffset;
+        uint8_t* mFileName;
+        uint8_t* mExtraField;
+        uint8_t* mFileComment;
 
         void dump(void) const;
 
diff --git a/tools/zipalign/ZipFile.cpp b/tools/zipalign/ZipFile.cpp
index 3c5ec15..7c3ff37 100644
--- a/tools/zipalign/ZipFile.cpp
+++ b/tools/zipalign/ZipFile.cpp
@@ -34,6 +34,7 @@
 #include <sys/stat.h>
 #include <errno.h>
 #include <assert.h>
+#include <inttypes.h>
 
 using namespace android;
 
@@ -206,7 +207,7 @@
 status_t ZipFile::readCentralDir(void)
 {
     status_t result = NO_ERROR;
-    unsigned char* buf = NULL;
+    uint8_t* buf = NULL;
     off_t fileLength, seekStart;
     long readAmount;
     int i;
@@ -222,7 +223,7 @@
         goto bail;
     }
 
-    buf = new unsigned char[EndOfCentralDir::kMaxEOCDSearch];
+    buf = new uint8_t[EndOfCentralDir::kMaxEOCDSearch];
     if (buf == NULL) {
         ALOGD("Failure allocating %d bytes for EOCD search",
              EndOfCentralDir::kMaxEOCDSearch);
@@ -296,7 +297,7 @@
      * we're hoping to preserve.
      */
     if (fseek(mZipFp, mEOCD.mCentralDirOffset, SEEK_SET) != 0) {
-        ALOGD("Failure seeking to central dir offset %ld\n",
+        ALOGD("Failure seeking to central dir offset %" PRIu32 "\n",
              mEOCD.mCentralDirOffset);
         result = UNKNOWN_ERROR;
         goto bail;
@@ -305,7 +306,7 @@
     /*
      * Loop through and read the central dir entries.
      */
-    ALOGV("Scanning %d entries...\n", mEOCD.mTotalNumEntries);
+    ALOGV("Scanning %" PRIu16 " entries...\n", mEOCD.mTotalNumEntries);
     int entry;
     for (entry = 0; entry < mEOCD.mTotalNumEntries; entry++) {
         ZipEntry* pEntry = new ZipEntry;
@@ -325,7 +326,7 @@
      * If all went well, we should now be back at the EOCD.
      */
     {
-        unsigned char checkBuf[4];
+        uint8_t checkBuf[4];
         if (fread(checkBuf, 1, 4, mZipFp) != 4) {
             ALOGD("EOCD check read failed\n");
             result = INVALID_OPERATION;
@@ -365,7 +366,7 @@
     status_t result = NO_ERROR;
     long lfhPosn, startPosn, endPosn, uncompressedLen;
     FILE* inputFp = NULL;
-    unsigned long crc;
+    uint32_t crc;
     time_t modWhen;
 
     if (mReadOnly)
@@ -466,14 +467,16 @@
         bool scanResult;
         int method;
         long compressedLen;
+        unsigned long longcrc;
 
         scanResult = ZipUtils::examineGzip(inputFp, &method, &uncompressedLen,
-                        &compressedLen, &crc);
+                        &compressedLen, &longcrc);
         if (!scanResult || method != ZipEntry::kCompressDeflated) {
             ALOGD("this isn't a deflated gzip file?");
             result = UNKNOWN_ERROR;
             goto bail;
         }
+        crc = longcrc;
 
         result = copyPartialFpToFp(mZipFp, inputFp, compressedLen, NULL);
         if (result != NO_ERROR) {
@@ -710,7 +713,7 @@
             goto bail;
         }
         long startPosn = ftell(mZipFp);
-        unsigned long crc;
+        uint32_t crc;
         if (compressFpToFp(mZipFp, NULL, buf, uncompressedLen, &crc) != NO_ERROR) {
             ALOGW("recompress of '%s' failed\n", pEntry->mCDE.mFileName);
             result = UNKNOWN_ERROR;
@@ -780,9 +783,9 @@
  * On exit, "srcFp" will be seeked to the end of the file, and "dstFp"
  * will be seeked immediately past the data.
  */
-status_t ZipFile::copyFpToFp(FILE* dstFp, FILE* srcFp, unsigned long* pCRC32)
+status_t ZipFile::copyFpToFp(FILE* dstFp, FILE* srcFp, uint32_t* pCRC32)
 {
-    unsigned char tmpBuf[32768];
+    uint8_t tmpBuf[32768];
     size_t count;
 
     *pCRC32 = crc32(0L, Z_NULL, 0);
@@ -811,7 +814,7 @@
  * On exit, "dstFp" will be seeked immediately past the data.
  */
 status_t ZipFile::copyDataToFp(FILE* dstFp,
-    const void* data, size_t size, unsigned long* pCRC32)
+    const void* data, size_t size, uint32_t* pCRC32)
 {
     size_t count;
 
@@ -836,9 +839,9 @@
  * will be seeked immediately past the data just written.
  */
 status_t ZipFile::copyPartialFpToFp(FILE* dstFp, FILE* srcFp, long length,
-    unsigned long* pCRC32)
+    uint32_t* pCRC32)
 {
-    unsigned char tmpBuf[32768];
+    uint8_t tmpBuf[32768];
     size_t count;
 
     if (pCRC32 != NULL)
@@ -846,7 +849,7 @@
 
     while (length) {
         long readSize;
-        
+
         readSize = sizeof(tmpBuf);
         if (readSize > length)
             readSize = length;
@@ -878,15 +881,15 @@
  * will be seeked immediately past the compressed data.
  */
 status_t ZipFile::compressFpToFp(FILE* dstFp, FILE* srcFp,
-    const void* data, size_t size, unsigned long* pCRC32)
+    const void* data, size_t size, uint32_t* pCRC32)
 {
     status_t result = NO_ERROR;
     const size_t kBufSize = 1024 * 1024;
-    unsigned char* inBuf = NULL;
-    unsigned char* outBuf = NULL;
+    uint8_t* inBuf = NULL;
+    uint8_t* outBuf = NULL;
     size_t outSize = 0;
     bool atEof = false;     // no feof() aviailable yet
-    unsigned long crc;
+    uint32_t crc;
     ZopfliOptions options;
     unsigned char bp = 0;
 
@@ -902,7 +905,7 @@
         /*
          * Create an input buffer and an output buffer.
          */
-        inBuf = new unsigned char[kBufSize];
+        inBuf = new uint8_t[kBufSize];
         if (inBuf == NULL) {
             result = NO_MEMORY;
             goto bail;
@@ -1128,7 +1131,7 @@
     if (dst == src || n <= 0)
         return NO_ERROR;
 
-    unsigned char readBuf[32768];
+    uint8_t readBuf[32768];
 
     if (dst < src) {
         /* shift stuff toward start of file; must read from start */
@@ -1294,7 +1297,7 @@
  * "buf" should be positioned at the EOCD signature, and should contain
  * the entire EOCD area including the comment.
  */
-status_t ZipFile::EndOfCentralDir::readBuf(const unsigned char* buf, int len)
+status_t ZipFile::EndOfCentralDir::readBuf(const uint8_t* buf, int len)
 {
     /* don't allow re-use */
     assert(mComment == NULL);
@@ -1322,11 +1325,11 @@
 
     if (mCommentLen > 0) {
         if (kEOCDLen + mCommentLen > len) {
-            ALOGD("EOCD(%d) + comment(%d) exceeds len (%d)\n",
+            ALOGD("EOCD(%d) + comment(%" PRIu16 ") exceeds len (%d)\n",
                 kEOCDLen, mCommentLen, len);
             return UNKNOWN_ERROR;
         }
-        mComment = new unsigned char[mCommentLen];
+        mComment = new uint8_t[mCommentLen];
         memcpy(mComment, buf + kEOCDLen, mCommentLen);
     }
 
@@ -1338,7 +1341,7 @@
  */
 status_t ZipFile::EndOfCentralDir::write(FILE* fp)
 {
-    unsigned char buf[kEOCDLen];
+    uint8_t buf[kEOCDLen];
 
     ZipEntry::putLongLE(&buf[0x00], kSignature);
     ZipEntry::putShortLE(&buf[0x04], mDiskNumber);
@@ -1366,9 +1369,9 @@
 void ZipFile::EndOfCentralDir::dump(void) const
 {
     ALOGD(" EndOfCentralDir contents:\n");
-    ALOGD("  diskNum=%u diskWCD=%u numEnt=%u totalNumEnt=%u\n",
+    ALOGD("  diskNum=%" PRIu16 " diskWCD=%" PRIu16 " numEnt=%" PRIu16 " totalNumEnt=%" PRIu16 "\n",
         mDiskNumber, mDiskWithCentralDir, mNumEntries, mTotalNumEntries);
-    ALOGD("  centDirSize=%lu centDirOff=%lu commentLen=%u\n",
+    ALOGD("  centDirSize=%" PRIu32 " centDirOff=%" PRIu32 " commentLen=%" PRIu32 "\n",
         mCentralDirSize, mCentralDirOffset, mCommentLen);
 }
 
diff --git a/tools/zipalign/ZipFile.h b/tools/zipalign/ZipFile.h
index b99cda5..b0bafe9 100644
--- a/tools/zipalign/ZipFile.h
+++ b/tools/zipalign/ZipFile.h
@@ -194,18 +194,18 @@
             delete[] mComment;
         }
 
-        status_t readBuf(const unsigned char* buf, int len);
+        status_t readBuf(const uint8_t* buf, int len);
         status_t write(FILE* fp);
 
-        //unsigned long   mSignature;
-        unsigned short  mDiskNumber;
-        unsigned short  mDiskWithCentralDir;
-        unsigned short  mNumEntries;
-        unsigned short  mTotalNumEntries;
-        unsigned long   mCentralDirSize;
-        unsigned long   mCentralDirOffset;      // offset from first disk
-        unsigned short  mCommentLen;
-        unsigned char*  mComment;
+        //uint32_t mSignature;
+        uint16_t mDiskNumber;
+        uint16_t mDiskWithCentralDir;
+        uint16_t mNumEntries;
+        uint16_t mTotalNumEntries;
+        uint32_t mCentralDirSize;
+        uint32_t mCentralDirOffset;      // offset from first disk
+        uint16_t mCommentLen;
+        uint8_t* mComment;
 
         enum {
             kSignature      = 0x06054b50,
@@ -235,18 +235,18 @@
         ZipEntry** ppEntry);
 
     /* copy all of "srcFp" into "dstFp" */
-    status_t copyFpToFp(FILE* dstFp, FILE* srcFp, unsigned long* pCRC32);
+    status_t copyFpToFp(FILE* dstFp, FILE* srcFp, uint32_t* pCRC32);
     /* copy all of "data" into "dstFp" */
     status_t copyDataToFp(FILE* dstFp,
-        const void* data, size_t size, unsigned long* pCRC32);
+        const void* data, size_t size, uint32_t* pCRC32);
     /* copy some of "srcFp" into "dstFp" */
     status_t copyPartialFpToFp(FILE* dstFp, FILE* srcFp, long length,
-        unsigned long* pCRC32);
+        uint32_t* pCRC32);
     /* like memmove(), but on parts of a single file */
     status_t filemove(FILE* fp, off_t dest, off_t src, size_t n);
     /* compress all of "srcFp" into "dstFp", using Deflate */
     status_t compressFpToFp(FILE* dstFp, FILE* srcFp,
-        const void* data, size_t size, unsigned long* pCRC32);
+        const void* data, size_t size, uint32_t* pCRC32);
 
     /* get modification date from a file descriptor */
     time_t getModTime(int fd);
diff --git a/tools/check_prereq/Android.mk b/tools/ziptime/Android.mk
similarity index 65%
rename from tools/check_prereq/Android.mk
rename to tools/ziptime/Android.mk
index 4329aff..3575229 100644
--- a/tools/check_prereq/Android.mk
+++ b/tools/ziptime/Android.mk
@@ -1,4 +1,5 @@
-# Copyright (C) 2009 The Android Open Source Project
+#
+# Copyright 2015 The Android Open Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -11,15 +12,21 @@
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
+#
 
-LOCAL_PATH := $(call my-dir)
+#
+# Zip timestamp removal tool
+#
+
+LOCAL_PATH:= $(call my-dir)
 include $(CLEAR_VARS)
 
-LOCAL_SRC_FILES := check_prereq.c
-LOCAL_MODULE := check_prereq
-LOCAL_FORCE_STATIC_EXECUTABLE := true
-LOCAL_MODULE_TAGS := eng
-LOCAL_C_INCLUDES +=
-LOCAL_STATIC_LIBRARIES += libcutils libc
+LOCAL_SRC_FILES := \
+	ZipTime.cpp \
+	ZipEntry.cpp \
+	ZipFile.cpp
 
-include $(BUILD_EXECUTABLE)
+LOCAL_MODULE := ziptime
+LOCAL_MODULE_HOST_OS := darwin linux windows
+
+include $(BUILD_HOST_EXECUTABLE)
diff --git a/tools/ziptime/README.txt b/tools/ziptime/README.txt
new file mode 100644
index 0000000..8a101e9
--- /dev/null
+++ b/tools/ziptime/README.txt
@@ -0,0 +1,10 @@
+ziptime -- zip timestamp tool
+
+usage: ziptime file.zip
+
+  file.zip is an existing Zip archive to rewrite
+
+
+This tools replaces the timestamps in the zip headers with a static time
+(Jan 1 2008). The extra fields are not changed, so you'll need to use the
+-X option to zip so that it doesn't create the 'universal time' extra.
diff --git a/tools/ziptime/ZipEntry.cpp b/tools/ziptime/ZipEntry.cpp
new file mode 100644
index 0000000..51ce09f
--- /dev/null
+++ b/tools/ziptime/ZipEntry.cpp
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2006 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//
+// Access to entries in a Zip archive.
+//
+
+#include "ZipEntry.h"
+
+#include <stdio.h>
+#include <string.h>
+#include <assert.h>
+#include <inttypes.h>
+
+using namespace android;
+
+#define LOG(...) fprintf(stderr, __VA_ARGS__)
+
+/* Jan 01 2008 */
+#define STATIC_DATE (28 << 9 | 1 << 5 | 1)
+#define STATIC_TIME 0
+
+/*
+ * Initialize a new ZipEntry structure from a FILE* positioned at a
+ * CentralDirectoryEntry. Rewrites the headers to remove the dynamic
+ * timestamps.
+ *
+ * On exit, the file pointer will be at the start of the next CDE or
+ * at the EOCD.
+ */
+status_t ZipEntry::initAndRewriteFromCDE(FILE* fp)
+{
+    status_t result;
+    long posn;
+
+    /* read the CDE */
+    result = mCDE.rewrite(fp);
+    if (result != 0) {
+        LOG("mCDE.rewrite failed\n");
+        return result;
+    }
+
+    /* using the info in the CDE, go load up the LFH */
+    posn = ftell(fp);
+    if (fseek(fp, mCDE.mLocalHeaderRelOffset, SEEK_SET) != 0) {
+        LOG("local header seek failed (%" PRIu32 ")\n",
+            mCDE.mLocalHeaderRelOffset);
+        return -1;
+    }
+
+    result = mLFH.rewrite(fp);
+    if (result != 0) {
+        LOG("mLFH.rewrite failed\n");
+        return result;
+    }
+
+    if (fseek(fp, posn, SEEK_SET) != 0)
+        return -1;
+
+    return 0;
+}
+
+/*
+ * ===========================================================================
+ *      ZipEntry::LocalFileHeader
+ * ===========================================================================
+ */
+
+/*
+ * Rewrite a local file header.
+ *
+ * On entry, "fp" points to the signature at the start of the header.
+ */
+status_t ZipEntry::LocalFileHeader::rewrite(FILE* fp)
+{
+    status_t result = 0;
+    uint8_t buf[kLFHLen];
+
+    if (fread(buf, 1, kLFHLen, fp) != kLFHLen)
+        return -1;
+
+    if (ZipEntry::getLongLE(&buf[0x00]) != kSignature) {
+        LOG("whoops: didn't find expected signature\n");
+        return -1;
+    }
+
+    ZipEntry::putShortLE(&buf[0x0a], STATIC_TIME);
+    ZipEntry::putShortLE(&buf[0x0c], STATIC_DATE);
+
+    if (fseek(fp, -kLFHLen, SEEK_CUR) != 0)
+        return -1;
+
+    if (fwrite(buf, 1, kLFHLen, fp) != kLFHLen)
+        return -1;
+
+    return 0;
+}
+
+/*
+ * ===========================================================================
+ *      ZipEntry::CentralDirEntry
+ * ===========================================================================
+ */
+
+/*
+ * Read and rewrite the central dir entry that appears next in the file.
+ *
+ * On entry, "fp" should be positioned on the signature bytes for the
+ * entry.  On exit, "fp" will point at the signature word for the next
+ * entry or for the EOCD.
+ */
+status_t ZipEntry::CentralDirEntry::rewrite(FILE* fp)
+{
+    status_t result = 0;
+    uint8_t buf[kCDELen];
+    uint16_t fileNameLength, extraFieldLength, fileCommentLength;
+
+    if (fread(buf, 1, kCDELen, fp) != kCDELen)
+        return -1;
+
+    if (ZipEntry::getLongLE(&buf[0x00]) != kSignature) {
+        LOG("Whoops: didn't find expected signature\n");
+        return -1;
+    }
+
+    ZipEntry::putShortLE(&buf[0x0c], STATIC_TIME);
+    ZipEntry::putShortLE(&buf[0x0e], STATIC_DATE);
+
+    fileNameLength = ZipEntry::getShortLE(&buf[0x1c]);
+    extraFieldLength = ZipEntry::getShortLE(&buf[0x1e]);
+    fileCommentLength = ZipEntry::getShortLE(&buf[0x20]);
+    mLocalHeaderRelOffset = ZipEntry::getLongLE(&buf[0x2a]);
+
+    if (fseek(fp, -kCDELen, SEEK_CUR) != 0)
+        return -1;
+
+    if (fwrite(buf, 1, kCDELen, fp) != kCDELen)
+        return -1;
+
+    if (fseek(fp, fileNameLength + extraFieldLength + fileCommentLength, SEEK_CUR) != 0)
+        return -1;
+
+    return 0;
+}
diff --git a/tools/ziptime/ZipEntry.h b/tools/ziptime/ZipEntry.h
new file mode 100644
index 0000000..26bf596
--- /dev/null
+++ b/tools/ziptime/ZipEntry.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright (C) 2006 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//
+// Zip archive entries.
+//
+// The ZipEntry class is tightly meshed with the ZipFile class.
+//
+#ifndef __LIBS_ZIPENTRY_H
+#define __LIBS_ZIPENTRY_H
+
+#include <stdlib.h>
+#include <stdint.h>
+#include <stdio.h>
+
+typedef int status_t;
+
+namespace android {
+
+class ZipFile;
+
+/*
+ * ZipEntry objects represent a single entry in a Zip archive.
+ *
+ * File information is stored in two places: next to the file data (the Local
+ * File Header, and possibly a Data Descriptor), and at the end of the file
+ * (the Central Directory Entry).  The two must be kept in sync.
+ */
+class ZipEntry {
+public:
+    friend class ZipFile;
+
+    ZipEntry(void) {}
+    ~ZipEntry(void) {}
+
+    /*
+     * Some basic functions for raw data manipulation.  "LE" means
+     * Little Endian.
+     */
+    static inline uint16_t getShortLE(const uint8_t* buf) {
+        return buf[0] | (buf[1] << 8);
+    }
+    static inline uint32_t getLongLE(const uint8_t* buf) {
+        return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+    }
+    static inline void putShortLE(uint8_t* buf, uint16_t val) {
+        buf[0] = (uint8_t) val;
+        buf[1] = (uint8_t) (val >> 8);
+    }
+
+protected:
+    /*
+     * Initialize the structure from the file, which is pointing at
+     * our Central Directory entry. And rewrite it.
+     */
+    status_t initAndRewriteFromCDE(FILE* fp);
+
+private:
+    /* these are private and not defined */
+    ZipEntry(const ZipEntry& src);
+    ZipEntry& operator=(const ZipEntry& src);
+
+    /*
+     * Every entry in the Zip archive starts off with one of these.
+     */
+    class LocalFileHeader {
+    public:
+        LocalFileHeader(void) {}
+
+        status_t rewrite(FILE* fp);
+
+        enum {
+            kSignature      = 0x04034b50,
+            kLFHLen         = 30,       // LocalFileHdr len, excl. var fields
+        };
+    };
+
+    /*
+     * Every entry in the Zip archive has one of these in the "central
+     * directory" at the end of the file.
+     */
+    class CentralDirEntry {
+    public:
+        CentralDirEntry(void) :
+            mLocalHeaderRelOffset(0)
+        {}
+
+        status_t rewrite(FILE* fp);
+
+        uint32_t mLocalHeaderRelOffset;
+
+        enum {
+            kSignature      = 0x02014b50,
+            kCDELen         = 46,       // CentralDirEnt len, excl. var fields
+        };
+    };
+
+    LocalFileHeader     mLFH;
+    CentralDirEntry     mCDE;
+};
+
+}; // namespace android
+
+#endif // __LIBS_ZIPENTRY_H
diff --git a/tools/ziptime/ZipFile.cpp b/tools/ziptime/ZipFile.cpp
new file mode 100644
index 0000000..1d111af
--- /dev/null
+++ b/tools/ziptime/ZipFile.cpp
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2006 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//
+// Access to Zip archives.
+//
+
+#include "ZipFile.h"
+
+#include <memory.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <assert.h>
+#include <inttypes.h>
+
+using namespace android;
+
+#define LOG(...) fprintf(stderr, __VA_ARGS__)
+
+/*
+ * Open a file and rewrite the headers
+ */
+status_t ZipFile::rewrite(const char* zipFileName)
+{
+    assert(mZipFp == NULL);     // no reopen
+
+    /* open the file */
+    mZipFp = fopen(zipFileName, "r+b");
+    if (mZipFp == NULL) {
+        int err = errno;
+        LOG("fopen failed: %d\n", err);
+        return -1;
+    }
+
+    /*
+     * Load the central directory.  If that fails, then this probably
+     * isn't a Zip archive.
+     */
+    return rewriteCentralDir();
+}
+
+/*
+ * Find the central directory, read and rewrite the contents.
+ *
+ * The fun thing about ZIP archives is that they may or may not be
+ * readable from start to end.  In some cases, notably for archives
+ * that were written to stdout, the only length information is in the
+ * central directory at the end of the file.
+ *
+ * Of course, the central directory can be followed by a variable-length
+ * comment field, so we have to scan through it backwards.  The comment
+ * is at most 64K, plus we have 18 bytes for the end-of-central-dir stuff
+ * itself, plus apparently sometimes people throw random junk on the end
+ * just for the fun of it.
+ *
+ * This is all a little wobbly.  If the wrong value ends up in the EOCD
+ * area, we're hosed.  This appears to be the way that everbody handles
+ * it though, so we're in pretty good company if this fails.
+ */
+status_t ZipFile::rewriteCentralDir(void)
+{
+    status_t result = 0;
+    uint8_t* buf = NULL;
+    off_t fileLength, seekStart;
+    long readAmount;
+    int i;
+
+    fseek(mZipFp, 0, SEEK_END);
+    fileLength = ftell(mZipFp);
+    rewind(mZipFp);
+
+    /* too small to be a ZIP archive? */
+    if (fileLength < EndOfCentralDir::kEOCDLen) {
+        LOG("Length is %ld -- too small\n", (long)fileLength);
+        result = -1;
+        goto bail;
+    }
+
+    buf = new uint8_t[EndOfCentralDir::kMaxEOCDSearch];
+    if (buf == NULL) {
+        LOG("Failure allocating %d bytes for EOCD search",
+             EndOfCentralDir::kMaxEOCDSearch);
+        result = -1;
+        goto bail;
+    }
+
+    if (fileLength > EndOfCentralDir::kMaxEOCDSearch) {
+        seekStart = fileLength - EndOfCentralDir::kMaxEOCDSearch;
+        readAmount = EndOfCentralDir::kMaxEOCDSearch;
+    } else {
+        seekStart = 0;
+        readAmount = (long) fileLength;
+    }
+    if (fseek(mZipFp, seekStart, SEEK_SET) != 0) {
+        LOG("Failure seeking to end of zip at %ld", (long) seekStart);
+        result = -1;
+        goto bail;
+    }
+
+    /* read the last part of the file into the buffer */
+    if (fread(buf, 1, readAmount, mZipFp) != (size_t) readAmount) {
+        LOG("short file? wanted %ld\n", readAmount);
+        result = -1;
+        goto bail;
+    }
+
+    /* find the end-of-central-dir magic */
+    for (i = readAmount - 4; i >= 0; i--) {
+        if (buf[i] == 0x50 &&
+            ZipEntry::getLongLE(&buf[i]) == EndOfCentralDir::kSignature)
+        {
+            break;
+        }
+    }
+    if (i < 0) {
+        LOG("EOCD not found, not Zip\n");
+        result = -1;
+        goto bail;
+    }
+
+    /* extract eocd values */
+    result = mEOCD.readBuf(buf + i, readAmount - i);
+    if (result != 0) {
+        LOG("Failure reading %ld bytes of EOCD values", readAmount - i);
+        goto bail;
+    }
+
+    /*
+     * So far so good.  "mCentralDirSize" is the size in bytes of the
+     * central directory, so we can just seek back that far to find it.
+     * We can also seek forward mCentralDirOffset bytes from the
+     * start of the file.
+     *
+     * We're not guaranteed to have the rest of the central dir in the
+     * buffer, nor are we guaranteed that the central dir will have any
+     * sort of convenient size.  We need to skip to the start of it and
+     * read the header, then the other goodies.
+     *
+     * The only thing we really need right now is the file comment, which
+     * we're hoping to preserve.
+     */
+    if (fseek(mZipFp, mEOCD.mCentralDirOffset, SEEK_SET) != 0) {
+        LOG("Failure seeking to central dir offset %" PRIu32 "\n",
+             mEOCD.mCentralDirOffset);
+        result = -1;
+        goto bail;
+    }
+
+    /*
+     * Loop through and read the central dir entries.
+     */
+    int entry;
+    for (entry = 0; entry < mEOCD.mTotalNumEntries; entry++) {
+        ZipEntry* pEntry = new ZipEntry;
+
+        result = pEntry->initAndRewriteFromCDE(mZipFp);
+        if (result != 0) {
+            LOG("initFromCDE failed\n");
+            delete pEntry;
+            goto bail;
+        }
+
+        delete pEntry;
+    }
+
+
+    /*
+     * If all went well, we should now be back at the EOCD.
+     */
+    uint8_t checkBuf[4];
+    if (fread(checkBuf, 1, 4, mZipFp) != 4) {
+        LOG("EOCD check read failed\n");
+        result = -1;
+        goto bail;
+    }
+    if (ZipEntry::getLongLE(checkBuf) != EndOfCentralDir::kSignature) {
+        LOG("EOCD read check failed\n");
+        result = -1;
+        goto bail;
+    }
+
+bail:
+    delete[] buf;
+    return result;
+}
+
+/*
+ * ===========================================================================
+ *      ZipFile::EndOfCentralDir
+ * ===========================================================================
+ */
+
+/*
+ * Read the end-of-central-dir fields.
+ *
+ * "buf" should be positioned at the EOCD signature, and should contain
+ * the entire EOCD area including the comment.
+ */
+status_t ZipFile::EndOfCentralDir::readBuf(const uint8_t* buf, int len)
+{
+    uint16_t diskNumber, diskWithCentralDir, numEntries;
+
+    if (len < kEOCDLen) {
+        /* looks like ZIP file got truncated */
+        LOG(" Zip EOCD: expected >= %d bytes, found %d\n",
+            kEOCDLen, len);
+        return -1;
+    }
+
+    /* this should probably be an assert() */
+    if (ZipEntry::getLongLE(&buf[0x00]) != kSignature)
+        return -1;
+
+    diskNumber = ZipEntry::getShortLE(&buf[0x04]);
+    diskWithCentralDir = ZipEntry::getShortLE(&buf[0x06]);
+    numEntries = ZipEntry::getShortLE(&buf[0x08]);
+    mTotalNumEntries = ZipEntry::getShortLE(&buf[0x0a]);
+    mCentralDirOffset = ZipEntry::getLongLE(&buf[0x10]);
+
+    if (diskNumber != 0 || diskWithCentralDir != 0 ||
+        numEntries != mTotalNumEntries)
+    {
+        LOG("Archive spanning not supported\n");
+        return -1;
+    }
+
+    return 0;
+}
diff --git a/tools/ziptime/ZipFile.h b/tools/ziptime/ZipFile.h
new file mode 100644
index 0000000..b049e05
--- /dev/null
+++ b/tools/ziptime/ZipFile.h
@@ -0,0 +1,84 @@
+/*
+ * Copyright (C) 2006 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//
+// Class to rewrite zip file headers to remove dynamic timestamps.
+//
+#ifndef __LIBS_ZIPFILE_H
+#define __LIBS_ZIPFILE_H
+
+#include <stdio.h>
+
+#include "ZipEntry.h"
+
+namespace android {
+
+/*
+ * Manipulate a Zip archive.
+ */
+class ZipFile {
+public:
+    ZipFile(void) : mZipFp(NULL) {}
+    ~ZipFile(void) {
+        if (mZipFp != NULL)
+            fclose(mZipFp);
+    }
+
+    /*
+     * Rewrite an archive's headers to remove dynamic timestamps.
+     */
+    status_t rewrite(const char* zipFileName);
+
+private:
+    /* these are private and not defined */
+    ZipFile(const ZipFile& src);
+    ZipFile& operator=(const ZipFile& src);
+
+    class EndOfCentralDir {
+    public:
+        EndOfCentralDir(void) : mTotalNumEntries(0), mCentralDirOffset(0) {}
+
+        status_t readBuf(const uint8_t* buf, int len);
+
+        uint16_t mTotalNumEntries;
+        uint32_t mCentralDirOffset;      // offset from first disk
+
+        enum {
+            kSignature      = 0x06054b50,
+            kEOCDLen        = 22,       // EndOfCentralDir len, excl. comment
+
+            kMaxCommentLen  = 65535,    // longest possible in ushort
+            kMaxEOCDSearch  = kMaxCommentLen + EndOfCentralDir::kEOCDLen,
+
+        };
+    };
+
+    /* read all entries in the central dir */
+    status_t rewriteCentralDir(void);
+
+    /*
+     * We use stdio FILE*, which gives us buffering but makes dealing
+     * with files >2GB awkward.  Until we support Zip64, we're fine.
+     */
+    FILE*           mZipFp;             // Zip file pointer
+
+    /* one of these per file */
+    EndOfCentralDir mEOCD;
+};
+
+}; // namespace android
+
+#endif // __LIBS_ZIPFILE_H
diff --git a/tools/ziptime/ZipTime.cpp b/tools/ziptime/ZipTime.cpp
new file mode 100644
index 0000000..99d3231
--- /dev/null
+++ b/tools/ziptime/ZipTime.cpp
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2015 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * Zip tool to remove dynamic timestamps
+ */
+#include "ZipFile.h"
+
+#include <stdlib.h>
+#include <stdio.h>
+
+using namespace android;
+
+static void usage(void)
+{
+    fprintf(stderr, "Zip timestamp utility\n");
+    fprintf(stderr, "Copyright (C) 2015 The Android Open Source Project\n\n");
+    fprintf(stderr, "Usage: ziptime file.zip\n");
+}
+
+int main(int argc, char* const argv[])
+{
+    if (argc != 2) {
+        usage();
+        return 2;
+    }
+
+    ZipFile zip;
+    if (zip.rewrite(argv[1]) != 0) {
+        fprintf(stderr, "Unable to rewrite '%s' as zip archive\n", argv[1]);
+        return 1;
+    }
+
+    return 0;
+}