diff --git a/CleanSpec.mk b/CleanSpec.mk
index e70a50a..2663780 100644
--- a/CleanSpec.mk
+++ b/CleanSpec.mk
@@ -51,9 +51,6 @@
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/vendor)
 $(call add-clean-step, rm -rf $(PRODUCT_OUT)/android-info.txt)
 $(call add-clean-step, find $(PRODUCT_OUT) -name "*.apk" | xargs rm)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/APPS/*)
-$(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/build.prop)
-$(call add-clean-step, rm -rf $(OUT_DIR))
 
 # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST
 # ************************************************
diff --git a/core/Makefile b/core/Makefile
index f4669f2..9766336 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -115,7 +115,7 @@
 endef
 
 BUILDINFO_SH := build/tools/buildinfo.sh
-$(INSTALLED_BUILD_PROP_TARGET): $(BUILDINFO_SH) $(INTERNAL_BUILD_ID_MAKEFILE)
+$(INSTALLED_BUILD_PROP_TARGET): $(BUILDINFO_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(wildcard $(TARGET_DEVICE_DIR)/system.prop)
 	@echo Target buildinfo: $@
 	@mkdir -p $(dir $@)
 	$(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
@@ -572,8 +572,12 @@
 endif
 endif
 
+ifneq (true,$(TARGET_USERIMAGES_SPARSE_EXT_DISABLED))
+  INTERNAL_USERIMAGES_SPARSE_EXT_FLAG := -s
+endif
+
 ifeq ($(INTERNAL_USERIMAGES_USE_EXT),true)
-INTERNAL_USERIMAGES_DEPS := $(MKEXT2USERIMG) $(MAKE_EXT4FS)
+INTERNAL_USERIMAGES_DEPS := $(MKEXTUSERIMG) $(MAKE_EXT4FS)
 INTERNAL_USERIMAGES_BINARY_PATHS := $(sort $(dir $(INTERNAL_USERIMAGES_DEPS)))
 
 # $(1): src directory
@@ -583,8 +587,8 @@
 # $(5): size of the partition
 define build-userimage-ext-target
   @mkdir -p $(dir $(2))
-    $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$(PATH) \
-	  $(MKEXT2USERIMG) $(1) $(2) $(4) $(3) $(5)
+  $(hide) PATH=$(foreach p,$(INTERNAL_USERIMAGES_BINARY_PATHS),$(p):)$(PATH) \
+	  $(MKEXTUSERIMG) $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG) $(1) $(2) $(4) $(3) $(5)
 endef
 else
 INTERNAL_USERIMAGES_DEPS := $(MKYAFFS2)
@@ -696,8 +700,14 @@
 mkyaffs2_extra_flags := -c $(BOARD_NAND_PAGE_SIZE)
 else
 mkyaffs2_extra_flags :=
+BOARD_NAND_PAGE_SIZE := 2048
 endif
 
+ifneq ($(BOARD_NAND_SPARE_SIZE),)
+mkyaffs2_extra_flags += -s $(BOARD_NAND_SPARE_SIZE)
+else
+BOARD_NAND_SPARE_SIZE := 64
+endif
 
 # -----------------------------------------------------------------
 # system image
@@ -778,8 +788,12 @@
 		$(INSTALLED_SYSTEMTARBALL_TARGET)
 endef
 
+ifndef SYSTEM_TARBALL_FORMAT
+    SYSTEM_TARBALL_FORMAT := bz2
+endif
+
 system_tar := $(PRODUCT_OUT)/system.tar
-INSTALLED_SYSTEMTARBALL_TARGET := $(system_tar).bz2
+INSTALLED_SYSTEMTARBALL_TARGET := $(system_tar).$(SYSTEM_TARBALL_FORMAT)
 $(INSTALLED_SYSTEMTARBALL_TARGET): PRIVATE_SYSTEM_TAR := $(system_tar)
 $(INSTALLED_SYSTEMTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_SYSTEMIMAGE_FILES)
 	$(build-systemtarball-target)
@@ -793,6 +807,34 @@
 stnod: systemtarball-nodeps
 
 
+#######
+## boot tarball
+define build-boottarball-target
+    $(hide) echo "Target boot fs tarball: $(INSTALLED_BOOTTARBALL_TARGET)"
+    $(hide) mkdir -p $(PRODUCT_OUT)/boot
+    $(hide) cp -f $(INTERNAL_BOOTIMAGE_FILES) $(PRODUCT_OUT)/boot/.
+    $(hide) echo $(BOARD_KERNEL_CMDLINE) > $(PRODUCT_OUT)/boot/cmdline
+    $(hide) $(MKTARBALL) $(FS_GET_STATS) \
+                 $(PRODUCT_OUT) boot $(PRIVATE_BOOT_TAR) \
+                 $(INSTALLED_BOOTTARBALL_TARGET)
+endef
+
+ifndef BOOT_TARBALL_FORMAT
+    BOOT_TARBALL_FORMAT := bz2
+endif
+
+boot_tar := $(PRODUCT_OUT)/boot.tar
+INSTALLED_BOOTTARBALL_TARGET := $(boot_tar).$(BOOT_TARBALL_FORMAT)
+$(INSTALLED_BOOTTARBALL_TARGET): PRIVATE_BOOT_TAR := $(boot_tar)
+$(INSTALLED_BOOTTARBALL_TARGET): $(FS_GET_STATS) $(INTERNAL_BOOTIMAGE_FILES)
+	$(build-boottarball-target)
+
+.PHONY: boottarball-nodeps btnod
+boottarball-nodeps btnod: $(FS_GET_STATS) \
+                      $(filter-out boottarball-nodeps btnod,$(MAKECMDGOALS))
+	$(build-boottarball-target)
+
+
 # -----------------------------------------------------------------
 # data partition image
 INTERNAL_USERDATAIMAGE_FILES := \
@@ -1014,6 +1056,9 @@
 ifdef mkyaffs2_extra_flags
 	$(hide) echo "mkyaffs2_extra_flags=$(mkyaffs2_extra_flags)" >> $(zip_root)/META/misc_info.txt
 endif
+ifdef INTERNAL_USERIMAGES_SPARSE_EXT_FLAG
+	$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(zip_root)/META/misc_info.txt
+endif
 	@# Zip everything up, preserving symlinks
 	$(hide) (cd $(zip_root) && zip -qry ../$(notdir $@) .)
 	@# Run fs_config on all the system files in the zip, and save the output
@@ -1219,7 +1264,7 @@
 
 INTERNAL_EMULATOR_PACKAGE_FILES += \
         $(HOST_OUT_EXECUTABLES)/emulator$(HOST_EXECUTABLE_SUFFIX) \
-        prebuilt/android-arm/kernel/kernel-qemu \
+        prebuilt/android-$(TARGET_ARCH)/kernel/kernel-qemu \
         $(INSTALLED_RAMDISK_TARGET) \
 		$(INSTALLED_SYSTEMIMAGE) \
 		$(INSTALLED_USERDATAIMAGE_TARGET)
@@ -1285,11 +1330,21 @@
 
 atree_dir := development/build
 
+# sdk/build/tools.atree contains the generic rules, while
+#
+# sdk/build/tools.$(TARGET_ARCH).atree contains target-specific rules
+# the latter is optional.
+#
+sdk_tools_atree_files := sdk/build/tools.atree
+ifneq (,$(strip $(wildcard sdk/build/tools.$(TARGET_ARCH).atree)))
+  sdk_tools_atree_files += sdk/build/tools.$(TARGET_ARCH).atree
+endif
+
 sdk_atree_files := \
 	$(atree_dir)/sdk.exclude.atree \
 	$(atree_dir)/sdk.atree \
 	$(atree_dir)/sdk-$(HOST_OS)-$(HOST_ARCH).atree \
-	sdk/build/tools.atree
+	$(sdk_tools_atree_files)
 
 deps := \
 	$(target_notice_file_txt) \
@@ -1303,7 +1358,7 @@
 	$(INSTALLED_BUILD_PROP_TARGET) \
 	$(ATREE_FILES) \
 	$(atree_dir)/sdk.atree \
-	sdk/build/tools.atree \
+	$(sdk_tools_atree_files) \
 	$(HOST_OUT_EXECUTABLES)/atree \
     $(HOST_OUT_EXECUTABLES)/line_endings
 
@@ -1317,6 +1372,12 @@
 #
 #SDK_GNU_ERROR := true
 
+ifeq ($(HOST_OS),darwin)
+HOST_STRIP_SDK_LLVM := strip
+else
+HOST_STRIP_SDK_LLVM := strip --strip-all
+endif
+
 $(INTERNAL_SDK_TARGET): $(deps)
 	@echo "Package SDK: $@"
 	$(hide) rm -rf $(PRIVATE_DIR) $@
@@ -1337,12 +1398,18 @@
 			-I $(HOST_OUT) \
 			-I $(TARGET_COMMON_OUT_ROOT) \
 			-v "PLATFORM_NAME=android-$(PLATFORM_VERSION)" \
+			-v "OUT_DIR=$(OUT_DIR)" \
+			-v "TARGET_ARCH=$(TARGET_ARCH)" \
+			-v "TARGET_CPU_ABI=$(TARGET_CPU_ABI)" \
 			-o $(PRIVATE_DIR) && \
 		cp -f $(target_notice_file_txt) \
-				$(PRIVATE_DIR)/platforms/android-$(PLATFORM_VERSION)/images/NOTICE.txt && \
+				$(PRIVATE_DIR)/platforms/android-$(PLATFORM_VERSION)/images/$(TARGET_CPU_ABI)/NOTICE.txt && \
 		cp -f $(tools_notice_file_txt) $(PRIVATE_DIR)/tools/NOTICE.txt && \
+		if [ -f $(PRIVATE_DIR)/platform-tools/llvm-rs-cc ]; then \
+			$(HOST_STRIP_SDK_LLVM) $(PRIVATE_DIR)/platform-tools/llvm-rs-cc; \
+		fi && \
 		HOST_OUT_EXECUTABLES=$(HOST_OUT_EXECUTABLES) HOST_OS=$(HOST_OS) \
-                development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \
+			development/build/tools/sdk_clean.sh $(PRIVATE_DIR) && \
 		chmod -R ug+rwX $(PRIVATE_DIR) && \
 		cd $(dir $@) && zip -rq $(notdir $@) $(PRIVATE_NAME) \
 	) || ( rm -rf $(PRIVATE_DIR) $@ && exit 44 )
@@ -1386,4 +1453,3 @@
 ifneq ($(sdk_repo_goal),)
 include $(TOPDIR)development/build/tools/sdk_repo.mk
 endif
-
diff --git a/core/base_rules.mk b/core/base_rules.mk
index 3c11673..54bbb68 100644
--- a/core/base_rules.mk
+++ b/core/base_rules.mk
@@ -69,7 +69,7 @@
 # Only the tags mentioned in this test are expected to be set by module
 # makefiles. Anything else is either a typo or a source of unexpected
 # behaviors.
-ifneq ($(filter-out user debug eng tests optional samples,$(LOCAL_MODULE_TAGS)),)
+ifneq ($(filter-out user debug eng tests optional samples shell_ash shell_mksh,$(LOCAL_MODULE_TAGS)),)
 $(warning unusual tags $(LOCAL_MODULE_TAGS) on $(LOCAL_MODULE) at $(LOCAL_PATH))
 endif
 
@@ -202,7 +202,7 @@
     $(error $(LOCAL_PATH): Illegal use of LOCAL_UNINSTALLABLE_MODULE)
   endif
 else
-  LOCAL_INSTALLED_MODULE := $(LOCAL_MODULE_PATH)/$(LOCAL_MODULE_SUBDIR)$(LOCAL_INSTALLED_MODULE_STEM)
+  LOCAL_INSTALLED_MODULE := $(LOCAL_MODULE_PATH)/$(LOCAL_INSTALLED_MODULE_STEM)
 endif
 
 # Assemble the list of targets to create PRIVATE_ variables for.
@@ -267,6 +267,44 @@
 endif
 
 ###########################################################
+## .proto files: Compile proto files to .java
+###########################################################
+proto_sources := $(filter %.proto,$(LOCAL_SRC_FILES))
+# Because names of the .java files compiled from .proto files are unknown until the
+# .proto files are compiled, we use a timestamp file as depedency.
+proto_java_sources_file_stamp :=
+ifneq ($(proto_sources),)
+proto_sources_fullpath := $(addprefix $(TOP_DIR)$(LOCAL_PATH)/, $(proto_sources))
+# By putting the generated java files into $(LOCAL_INTERMEDIATE_SOURCE_DIR), they will be
+# automatically found by the java compiling function transform-java-to-classes.jar.
+ifneq ($(LOCAL_INTERMEDIATE_SOURCE_DIR),)
+proto_java_intemediate_dir := $(LOCAL_INTERMEDIATE_SOURCE_DIR)/proto
+else
+# LOCAL_INTERMEDIATE_SOURCE_DIR may be not defined in non-java modules.
+proto_java_intemediate_dir := $(intermediates)/proto
+endif
+proto_java_sources_file_stamp := $(proto_java_intemediate_dir)/Proto.stamp
+proto_java_sources_dir := $(proto_java_intemediate_dir)/src
+
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_INCLUDES := $(TOP)
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_SRC_FILES := $(proto_sources_fullpath)
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_DIR := $(proto_java_sources_dir)
+ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),micro)
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --javamicro_out
+else
+$(proto_java_sources_file_stamp): PRIVATE_PROTO_JAVA_OUTPUT_OPTION := --java_out
+endif
+$(proto_java_sources_file_stamp): PRIVATE_PROTOC_FLAGS := $(LOCAL_PROTOC_FLAGS)
+$(proto_java_sources_file_stamp) : $(proto_sources_fullpath) $(PROTOC)
+	$(call transform-proto-to-java)
+
+#TODO: protoc should output the dependencies introduced by imports.
+
+LOCAL_INTERMEDIATE_TARGETS += $(proto_java_sources_file_stamp)
+endif # proto_sources
+
+
+###########################################################
 ## Java: Compile .java files to .class
 ###########################################################
 #TODO: pull this into java.make once host and target are combined
diff --git a/core/binary.mk b/core/binary.mk
index 5fb0e75..dcac435 100644
--- a/core/binary.mk
+++ b/core/binary.mk
@@ -48,6 +48,12 @@
 endif
 
 ###########################################################
+## Explicitly declare assembly-only __ASSEMBLY__ macro for
+## assembly source
+###########################################################
+LOCAL_ASFLAGS += -D__ASSEMBLY__
+
+###########################################################
 ## Define PRIVATE_ variables from global vars
 ###########################################################
 ifdef LOCAL_NDK_VERSION
@@ -102,6 +108,7 @@
 ## Define arm-vs-thumb-mode flags.
 ###########################################################
 LOCAL_ARM_MODE := $(strip $(LOCAL_ARM_MODE))
+ifeq ($(TARGET_ARCH),arm)
 arm_objects_mode := $(if $(LOCAL_ARM_MODE),$(LOCAL_ARM_MODE),arm)
 normal_objects_mode := $(if $(LOCAL_ARM_MODE),$(LOCAL_ARM_MODE),thumb)
 
@@ -110,6 +117,12 @@
 # actually used (although they are usually empty).
 arm_objects_cflags := $($(my_prefix)$(arm_objects_mode)_CFLAGS)
 normal_objects_cflags := $($(my_prefix)$(normal_objects_mode)_CFLAGS)
+else
+arm_objects_mode :=
+normal_objects_mode :=
+arm_objects_cflags :=
+normal_objects_cflags :=
+endif
 
 ###########################################################
 ## Define per-module debugging flags.  Users can turn on
@@ -133,6 +146,44 @@
 
 
 ###########################################################
+## Compile the .proto files to .cc and then to .o
+###########################################################
+proto_sources := $(filter %.proto,$(LOCAL_SRC_FILES))
+proto_generated_objects :=
+proto_generated_headers :=
+ifneq ($(proto_sources),)
+proto_sources_fullpath := $(addprefix $(LOCAL_PATH)/, $(proto_sources))
+proto_generated_cc_sources_dir := $(intermediates)/proto
+proto_generated_cc_sources := $(addprefix $(proto_generated_cc_sources_dir)/, \
+	$(patsubst %.proto,%.pb.cc,$(proto_sources_fullpath)))
+proto_generated_objects := $(patsubst %.cc,%.o, $(proto_generated_cc_sources))
+
+$(proto_generated_cc_sources): PRIVATE_PROTO_INCLUDES := $(TOP)
+$(proto_generated_cc_sources): PRIVATE_PROTO_CC_OUTPUT_DIR := $(proto_generated_cc_sources_dir)
+$(proto_generated_cc_sources): PRIVATE_PROTOC_FLAGS := $(LOCAL_PROTOC_FLAGS)
+$(proto_generated_cc_sources): $(proto_generated_cc_sources_dir)/%.pb.cc: %.proto $(PROTOC)
+	$(transform-proto-to-cc)
+
+proto_generated_headers := $(patsubst %.pb.cc,%.pb.h, $(proto_generated_cc_sources))
+$(proto_generated_headers): $(proto_generated_cc_sources_dir)/%.pb.h: $(proto_generated_cc_sources_dir)/%.pb.cc
+
+$(proto_generated_cc_sources): PRIVATE_ARM_MODE := $(normal_objects_mode)
+$(proto_generated_cc_sources): PRIVATE_ARM_CFLAGS := $(normal_objects_cflags)
+$(proto_generated_objects): $(proto_generated_cc_sources_dir)/%.o: $(proto_generated_cc_sources_dir)/%.cc
+	$(transform-$(PRIVATE_HOST)cpp-to-o)
+-include $(proto_generated_objects:%.o=%.P)
+
+LOCAL_C_INCLUDES += external/protobuf/src $(proto_generated_cc_sources_dir)
+LOCAL_CFLAGS += -DGOOGLE_PROTOBUF_NO_RTTI
+ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),full)
+LOCAL_STATIC_LIBRARIES += libprotobuf-cpp-2.3.0-full
+else
+LOCAL_STATIC_LIBRARIES += libprotobuf-cpp-2.3.0-lite
+endif
+endif
+
+
+###########################################################
 ## YACC: Compile .y files to .cpp and the to .o.
 ###########################################################
 
@@ -200,7 +251,7 @@
 ifneq ($(strip $(cpp_objects)),)
 $(cpp_objects): $(intermediates)/%.o: \
 		$(TOPDIR)$(LOCAL_PATH)/%$(LOCAL_CPP_EXTENSION) \
-		$(yacc_cpps) $(LOCAL_ADDITIONAL_DEPENDENCIES)
+		$(yacc_cpps) $(proto_generated_headers) $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-$(PRIVATE_HOST)cpp-to-o)
 -include $(cpp_objects:%.o=%.P)
 endif
@@ -217,7 +268,7 @@
 # TODO: support compiling certain generated files as arm.
 $(gen_cpp_objects): PRIVATE_ARM_MODE := $(normal_objects_mode)
 $(gen_cpp_objects): PRIVATE_ARM_CFLAGS := $(normal_objects_cflags)
-$(gen_cpp_objects): $(intermediates)/%.o: $(intermediates)/%$(LOCAL_CPP_EXTENSION) $(yacc_cpps) $(LOCAL_ADDITIONAL_DEPENDENCIES)
+$(gen_cpp_objects): $(intermediates)/%.o: $(intermediates)/%$(LOCAL_CPP_EXTENSION) $(yacc_cpps) $(proto_generated_headers) $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-$(PRIVATE_HOST)cpp-to-o)
 -include $(gen_cpp_objects:%.o=%.P)
 endif
@@ -264,7 +315,7 @@
 c_objects        := $(c_arm_objects) $(c_normal_objects)
 
 ifneq ($(strip $(c_objects)),)
-$(c_objects): $(intermediates)/%.o: $(TOPDIR)$(LOCAL_PATH)/%.c $(yacc_cpps) $(LOCAL_ADDITIONAL_DEPENDENCIES)
+$(c_objects): $(intermediates)/%.o: $(TOPDIR)$(LOCAL_PATH)/%.c $(yacc_cpps) $(proto_generated_headers) $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-$(PRIVATE_HOST)c-to-o)
 -include $(c_objects:%.o=%.P)
 endif
@@ -281,7 +332,7 @@
 # TODO: support compiling certain generated files as arm.
 $(gen_c_objects): PRIVATE_ARM_MODE := $(normal_objects_mode)
 $(gen_c_objects): PRIVATE_ARM_CFLAGS := $(normal_objects_cflags)
-$(gen_c_objects): $(intermediates)/%.o: $(intermediates)/%.c $(yacc_cpps) $(LOCAL_ADDITIONAL_DEPENDENCIES)
+$(gen_c_objects): $(intermediates)/%.o: $(intermediates)/%.c $(yacc_cpps) $(proto_generated_headers) $(LOCAL_ADDITIONAL_DEPENDENCIES)
 	$(transform-$(PRIVATE_HOST)c-to-o)
 -include $(gen_c_objects:%.o=%.P)
 endif
@@ -294,7 +345,7 @@
 objc_objects := $(addprefix $(intermediates)/,$(objc_sources:.m=.o))
 
 ifneq ($(strip $(objc_objects)),)
-$(objc_objects): $(intermediates)/%.o: $(TOPDIR)$(LOCAL_PATH)/%.m $(yacc_cpps) $(PRIVATE_ADDITIONAL_DEPENDENCIES)
+$(objc_objects): $(intermediates)/%.o: $(TOPDIR)$(LOCAL_PATH)/%.m $(yacc_cpps) $(proto_generated_headers) $(PRIVATE_ADDITIONAL_DEPENDENCIES)
 	$(transform-$(PRIVATE_HOST)m-to-o)
 -include $(objc_objects:%.o=%.P)
 endif
@@ -337,8 +388,10 @@
 	$(gen_asm_objects) \
 	$(c_objects) \
 	$(gen_c_objects) \
+	$(objc_objects) \
 	$(yacc_objects) \
 	$(lex_objects) \
+	$(proto_generated_objects) \
 	$(addprefix $(TOPDIR)$(LOCAL_PATH)/,$(LOCAL_PREBUILT_OBJ_FILES))
 
 LOCAL_C_INCLUDES += $(TOPDIR)$(LOCAL_PATH) $(intermediates) $(base_intermediates)
@@ -487,6 +540,7 @@
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_C_INCLUDES := $(LOCAL_C_INCLUDES)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_LDFLAGS := $(LOCAL_LDFLAGS)
 $(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_LDLIBS := $(LOCAL_LDLIBS)
+$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_NO_CRT := $(LOCAL_NO_CRT)
 
 # this is really the way to get the files onto the command line instead
 # of using $^, because then LOCAL_ADDITIONAL_DEPENDENCIES doesn't work
diff --git a/core/build-system.html b/core/build-system.html
index ce5e869..e547185 100644
--- a/core/build-system.html
+++ b/core/build-system.html
@@ -247,6 +247,7 @@
         for <code>eng</code>.
         <ul>
         <li>Installs modules tagged with: <code>eng</code>, <code>debug</code>,
+            <code>shell_</code>$(TARGET_SHELL),
             <code>user</code>, and/or <code>development</code>.
         <li>Installs non-APK modules that have no tags specified.
         <li>Installs APKs according to the product definition files, in
@@ -266,7 +267,7 @@
         <p>
         This is the flavor intended to be the final release bits.
         <ul>
-        <li>Installs modules tagged with <code>user</code>.
+        <li>Installs modules tagged with <code>shell_</code>$(TARGET_SHELL) and <code>user</code>.
         <li>Installs non-APK modules that have no tags specified.
         <li>Installs APKs according to the product definition files; tags
             are ignored for APK modules.
@@ -681,7 +682,8 @@
 <h4>LOCAL_MODULE_TAGS</h4>
 <p>Set <code>LOCAL_MODULE_TAGS</code> to any number of whitespace-separated
 tags.  If the tag list is empty or contains <code>droid</code>, the module
-will get installed as part of a <code>make droid</code>.  Otherwise, it will
+will get installed as part of a <code>make droid</code>.  Modules with the tag
+<code>shell_</code>$(TARGET_SHELL) will also be installed. Otherwise, it will
 only get installed by running <code>make &lt;your-module&gt;</code>
 or with the <code>make all</code> pseudotarget.</p>
 
diff --git a/core/build_id.mk b/core/build_id.mk
index 4b7b0e4..e954794 100644
--- a/core/build_id.mk
+++ b/core/build_id.mk
@@ -23,7 +23,7 @@
 # (like "TC1-RC5").  It must be a single word, and is
 # capitalized by convention.
 #
-BUILD_ID := GINGERBREAD
+BUILD_ID := OPENMASTER
 
 # DISPLAY_BUILD_NUMBER should only be set for development branches,
 # If set, the BUILD_NUMBER (cl) is appended to the BUILD_ID for
diff --git a/core/clear_vars.mk b/core/clear_vars.mk
index ee28f21..792bd56 100644
--- a/core/clear_vars.mk
+++ b/core/clear_vars.mk
@@ -96,9 +96,13 @@
 LOCAL_PROGUARD_FLAGS:=
 LOCAL_PROGUARD_FLAG_FILES:=
 LOCAL_EMMA_COVERAGE_FILTER:=
+LOCAL_WARNINGS_ENABLE:=
 LOCAL_MANIFEST_FILE:=
 LOCAL_BUILD_HOST_DEX:=
 LOCAL_DEX_PREOPT:=
+LOCAL_PROTOC_OPTIMIZE_TYPE:= # lite(default),micro,full
+LOCAL_PROTOC_FLAGS:=
+LOCAL_NO_CRT:=
 
 # Trim MAKEFILE_LIST so that $(call my-dir) doesn't need to
 # iterate over thousands of entries every time.
diff --git a/core/combo/HOST_darwin-x86.mk b/core/combo/HOST_darwin-x86.mk
index 093ecbe..121f89b 100644
--- a/core/combo/HOST_darwin-x86.mk
+++ b/core/combo/HOST_darwin-x86.mk
@@ -45,6 +45,8 @@
 HOST_CC := $(CC)
 HOST_CXX := $(CXX)
 HOST_AR := $(AR)
+HOST_STRIP := $(STRIP)
+HOST_STRIP_COMMAND = $(HOST_STRIP) --strip-debug $< -o $@
 
 HOST_SHLIB_SUFFIX := .dylib
 HOST_JNILIB_SUFFIX := .jnilib
diff --git a/core/combo/TARGET_linux-arm.mk b/core/combo/TARGET_linux-arm.mk
index ae1997c..f7a1756 100644
--- a/core/combo/TARGET_linux-arm.mk
+++ b/core/combo/TARGET_linux-arm.mk
@@ -52,6 +52,8 @@
 TARGET_AR := $(TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
 TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
 TARGET_LD := $(TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
+TARGET_STRIP := $(HOST_OUT_EXECUTABLES)/soslim$(HOST_EXECUTABLE_SUFFIX)
+TARGET_STRIP_COMMAND = $(TARGET_STRIP) --strip --shady --quiet $< --outfile $@
 
 TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
 
@@ -232,7 +234,7 @@
 	-Wl,-shared,-Bsymbolic \
 	$(PRIVATE_TARGET_GLOBAL_LD_DIRS) \
 	$(PRIVATE_ALL_OBJECTS) \
-	$(PRIVATE_TARGET_CRTBEGIN_SO_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTBEGIN_SO_O)) \
 	-Wl,--whole-archive \
 	$(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
 	-Wl,--no-whole-archive \
@@ -243,7 +245,7 @@
 	$(PRIVATE_LDFLAGS) \
 	$(PRIVATE_TARGET_FDO_LIB) \
 	$(PRIVATE_TARGET_LIBGCC) \
-	$(PRIVATE_TARGET_CRTEND_SO_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTEND_SO_O))
 endef
 
 define transform-o-to-executable-inner
@@ -255,14 +257,14 @@
 	$(TARGET_GLOBAL_LD_DIRS) \
 	-Wl,-rpath-link=$(TARGET_OUT_INTERMEDIATE_LIBRARIES) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-	$(TARGET_CRTBEGIN_DYNAMIC_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_DYNAMIC_O)) \
 	$(PRIVATE_ALL_OBJECTS) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(TARGET_GLOBAL_LDFLAGS) \
 	$(PRIVATE_LDFLAGS) \
 	$(TARGET_FDO_LIB) \
 	$(TARGET_LIBGCC) \
-	$(TARGET_CRTEND_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTEND_O))
 endef
 
 define transform-o-to-static-executable-inner
@@ -270,12 +272,12 @@
     -Wl,--gc-sections \
 	-o $@ \
 	$(TARGET_GLOBAL_LD_DIRS) \
-	$(TARGET_CRTBEGIN_STATIC_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_STATIC_O)) \
 	$(TARGET_GLOBAL_LDFLAGS) \
 	$(PRIVATE_LDFLAGS) \
 	$(PRIVATE_ALL_OBJECTS) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(TARGET_FDO_LIB) \
 	$(TARGET_LIBGCC) \
-	$(TARGET_CRTEND_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTEND_O))
 endef
diff --git a/core/combo/TARGET_linux-sh.mk b/core/combo/TARGET_linux-sh.mk
index f373d21d..1fac6a0 100644
--- a/core/combo/TARGET_linux-sh.mk
+++ b/core/combo/TARGET_linux-sh.mk
@@ -28,6 +28,8 @@
 TARGET_AR := $(TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
 TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
 TARGET_LD := $(TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
+TARGET_STRIP := $(TARGET_TOOLS_PREFIX)strip$(HOST_EXECUTABLE_SUFFIX)
+TARGET_STRIP_COMMAND = $(TARGET_STRIP) --strip-debug $< -o $@
 
 TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
 
@@ -103,10 +105,11 @@
 TARGET_CRTBEGIN_STATIC_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtbegin_static.o
 TARGET_CRTBEGIN_DYNAMIC_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtbegin_dynamic.o
 TARGET_CRTEND_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtend_android.o
+
 TARGET_CRTBEGIN_SO_O := $(TARGET_OUT_STATIC_LIBRARIES)/sobegin.o
 TARGET_CRTEND_SO_O := $(TARGET_OUT_STATIC_LIBRARIES)/soend.o
 
-TARGET_STRIP_MODULE:=false
+TARGET_STRIP_MODULE:=true
 
 TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libstdc++ libm
 
@@ -117,7 +120,7 @@
 	-Wl,--gc-sections -Wl,-z,norelro \
 	-Wl,-shared,-Bsymbolic \
 	$(PRIVATE_TARGET_GLOBAL_LD_DIRS) \
-	$(PRIVATE_TARGET_CRTBEGIN_SO_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTBEGIN_SO_O)) \
 	$(PRIVATE_ALL_OBJECTS) \
 	-Wl,--whole-archive \
 	$(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
@@ -128,7 +131,7 @@
 	$(PRIVATE_LDFLAGS) \
 	$(subst -lrt,, $(subst -lpthread,,$(PRIVATE_LDLIBS))) \
 	$(PRIVATE_TARGET_LIBGCC) \
-	$(PRIVATE_TARGET_CRTEND_SO_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTEND_SO_O))
 endef
 
 define transform-o-to-executable-inner
@@ -140,13 +143,13 @@
 	$(TARGET_GLOBAL_LD_DIRS) \
 	-Wl,-rpath-link=$(TARGET_OUT_INTERMEDIATE_LIBRARIES) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-	$(TARGET_CRTBEGIN_DYNAMIC_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_DYNAMIC_O)) \
 	$(PRIVATE_ALL_OBJECTS) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(PRIVATE_LDFLAGS) \
 	$(TARGET_LIBGCC) \
 	$(subst -lrt,, $(subst -lpthread,,$(PRIVATE_LDLIBS))) \
-	$(TARGET_CRTEND_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTEND_O))
 endef
 
 define transform-o-to-static-executable-inner
@@ -154,11 +157,11 @@
 	-Wl,--gc-sections -Wl,-z,norelro \
 	-o $@ \
 	$(TARGET_GLOBAL_LD_DIRS) \
-	$(TARGET_CRTBEGIN_STATIC_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_STATIC_O)) \
 	$(PRIVATE_LDFLAGS) \
 	$(PRIVATE_ALL_OBJECTS) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(TARGET_LIBGCC) \
 	$(subst -lrt,, $(subst -lpthread,,$(PRIVATE_LDLIBS))) \
-	$(TARGET_CRTEND_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTEND_O))
 endef
diff --git a/core/combo/TARGET_linux-x86.mk b/core/combo/TARGET_linux-x86.mk
index 6629cbd..989f7e3 100644
--- a/core/combo/TARGET_linux-x86.mk
+++ b/core/combo/TARGET_linux-x86.mk
@@ -25,7 +25,9 @@
 TARGET_GLOBAL_CFLAGS := $(HOST_GLOBAL_CFLAGS) -m32
 TARGET_GLOBAL_LDFLAGS := $(HOST_GLOBAL_LDFLAGS) -m32 -lpthread
 TARGET_NO_UNDEFINED_LDFLAGS := $(HOST_NO_UNDEFINED_LDFLAGS)
+ifeq ($(strip $(TARGET_ARCH_VARIANT)),)
 TARGET_ARCH_VARIANT := x86
+endif
 else #simulator
 
 # Provide a default variant.
@@ -36,7 +38,7 @@
 # You can set TARGET_TOOLS_PREFIX to get gcc from somewhere else
 ifeq ($(strip $(TARGET_TOOLS_PREFIX)),)
 TARGET_TOOLS_PREFIX := \
-	prebuilt/$(HOST_PREBUILT_TAG)/toolchain/i686-unknown-linux-gnu-4.2.1/bin/i686-unknown-linux-gnu-
+	prebuilt/$(HOST_PREBUILT_TAG)/toolchain/i686-android-linux-4.4.3/bin/i686-android-linux-
 endif
 
 TARGET_CC := $(TARGET_TOOLS_PREFIX)gcc$(HOST_EXECUTABLE_SUFFIX)
@@ -44,11 +46,12 @@
 TARGET_AR := $(TARGET_TOOLS_PREFIX)ar$(HOST_EXECUTABLE_SUFFIX)
 TARGET_OBJCOPY := $(TARGET_TOOLS_PREFIX)objcopy$(HOST_EXECUTABLE_SUFFIX)
 TARGET_LD := $(TARGET_TOOLS_PREFIX)ld$(HOST_EXECUTABLE_SUFFIX)
+TARGET_STRIP := $(TARGET_TOOLS_PREFIX)strip$(HOST_EXECUTABLE_SUFFIX)
+TARGET_STRIP_COMMAND = $(TARGET_STRIP) --strip-debug $< -o $@
 
 ifneq ($(wildcard $(TARGET_CC)),)
 TARGET_LIBGCC := \
-	$(shell $(TARGET_CC) -m32 -print-file-name=libgcc.a) \
-        $(shell $(TARGET_CC) -m32 -print-file-name=libgcc_eh.a)
+	$(shell $(TARGET_CC) -m32 -print-file-name=libgcc.a)
 endif
 
 TARGET_NO_UNDEFINED_LDFLAGS := -Wl,--no-undefined
@@ -72,14 +75,48 @@
 KERNEL_HEADERS := $(KERNEL_HEADERS_COMMON) $(KERNEL_HEADERS_ARCH)
 
 TARGET_GLOBAL_CFLAGS += \
-			-march=i686 \
-			-m32 \
+			-O2 \
+			-Ulinux \
+			-Wa,--noexecstack \
+			-Werror=format-security \
+			-Wstrict-aliasing=2 \
 			-fPIC \
+			-ffunction-sections \
+			-finline-functions \
+			-finline-limit=300 \
+			-fno-inline-functions-called-once \
+			-fno-short-enums \
+			-fstrict-aliasing \
+			-funswitch-loops \
+			-funwind-tables \
 			-include $(call select-android-config-h,target_linux-x86)
 
+TARGET_GLOBAL_CFLAGS += -fstack-protector
+
+# Needs to be added for RELEASE
+#TARGET_GLOBAL_CFLAGS += \
+#			-DNDEBUG
+
+
+# Fix this after ssp.c is fixed for x86
+# TARGET_GLOBAL_CFLAGS += -fstack-protector
+
 TARGET_GLOBAL_CPPFLAGS += \
 			-fno-use-cxa-atexit
 
+ifeq ($(TARGET_ARCH_VARIANT),x86-atom)
+    TARGET_GLOBAL_CFLAGS += -march=atom -mstackrealign -DUSE_SSSE3 -DUSE_SSE2 -mfpmath=sse
+else
+    TARGET_GLOBAL_CFLAGS += -march=i686
+endif
+
+TARGET_GLOBAL_CFLAGS += -mbionic
+TARGET_GLOBAL_CFLAGS += -D__ANDROID__
+
+TARGET_GLOBAL_LDFLAGS += -m32
+TARGET_GLOBAL_LDFLAGS += -Wl,-z,noexecstack
+TARGET_GLOBAL_LDFLAGS += -Wl,--gc-sections
+
 TARGET_C_INCLUDES := \
 	$(libc_root)/arch-x86/include \
 	$(libc_root)/include \
@@ -93,11 +130,10 @@
 TARGET_CRTBEGIN_DYNAMIC_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtbegin_dynamic.o
 TARGET_CRTEND_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtend_android.o
 
-
 TARGET_CRTBEGIN_SO_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtbegin_so.o
 TARGET_CRTEND_SO_O := $(TARGET_OUT_STATIC_LIBRARIES)/crtend_so.o
 
-# TARGET_STRIP_MODULE:=true
+TARGET_STRIP_MODULE:=true
 
 TARGET_DEFAULT_SYSTEM_SHARED_LIBRARIES := libc libstdc++ libm
 
@@ -107,9 +143,9 @@
 	$(PRIVATE_TARGET_GLOBAL_LDFLAGS) \
 	 -nostdlib -Wl,-soname,$(notdir $@) \
 	 -shared -Bsymbolic \
-	-fPIC -march=i686 \
+	$(TARGET_GLOBAL_CFLAGS) \
 	$(PRIVATE_TARGET_GLOBAL_LD_DIRS) \
-	$(PRIVATE_TARGET_CRTBEGIN_SO_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTBEGIN_SO_O)) \
 	$(PRIVATE_ALL_OBJECTS) \
 	-Wl,--whole-archive \
 	$(call normalize-host-libraries,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES)) \
@@ -119,7 +155,7 @@
 	-o $@ \
 	$(PRIVATE_LDFLAGS) \
 	$(PRIVATE_TARGET_LIBGCC) \
-	$(PRIVATE_TARGET_CRTEND_SO_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(PRIVATE_TARGET_CRTEND_SO_O))
 endef
 
 
@@ -133,12 +169,12 @@
 	$(TARGET_GLOBAL_LD_DIRS) \
 	-Wl,-rpath-link=$(TARGET_OUT_INTERMEDIATE_LIBRARIES) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_SHARED_LIBRARIES)) \
-	$(TARGET_CRTBEGIN_DYNAMIC_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_DYNAMIC_O)) \
 	$(PRIVATE_ALL_OBJECTS) \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(PRIVATE_LDFLAGS) \
 	$(TARGET_LIBGCC) \
-	$(TARGET_CRTEND_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTEND_O))
 endef
 
 define transform-o-to-static-executable-inner
@@ -147,17 +183,14 @@
 	-nostdlib -Bstatic \
 	-o $@ \
 	$(TARGET_GLOBAL_LD_DIRS) \
-	$(TARGET_CRTBEGIN_STATIC_O) \
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTBEGIN_STATIC_O)) \
 	$(PRIVATE_LDFLAGS) \
 	$(PRIVATE_ALL_OBJECTS) \
 	-Wl,--start-group \
 	$(call normalize-target-libraries,$(PRIVATE_ALL_STATIC_LIBRARIES)) \
 	$(TARGET_LIBGCC) \
 	-Wl,--end-group \
-	$(TARGET_CRTEND_O)
+	$(if $(filter true,$(PRIVATE_NO_CRT)),,$(TARGET_CRTEND_O))
 endef
 
-TARGET_GLOBAL_CFLAGS += -m32
-TARGET_GLOBAL_LDFLAGS += -m32
-
 endif #simulator
diff --git a/core/combo/select.mk b/core/combo/select.mk
index 797c573..d486255 100644
--- a/core/combo/select.mk
+++ b/core/combo/select.mk
@@ -28,6 +28,7 @@
 $(combo_target)CC := $(CC)
 $(combo_target)CXX := $(CXX)
 $(combo_target)AR := $(AR)
+$(combo_target)STRIP := $(STRIP)
 
 $(combo_target)BINDER_MINI := 0
 
@@ -61,13 +62,23 @@
 include $(BUILD_COMBOS)/$(combo_target)$(combo_os_arch).mk
 
 ifneq ($(USE_CCACHE),)
-  ccache := prebuilt/$(HOST_PREBUILT_TAG)/ccache/ccache
-  # prepend ccache if necessary
-  ifneq ($(ccache),$(firstword $($(combo_target)CC)))
-    $(combo_target)CC := $(ccache) $($(combo_target)CC)
+  CCACHE_HOST_TAG := $(HOST_PREBUILT_TAG)
+  # If we are cross-compiling Windows binaries on Linux
+  # then use the linux ccache binary instead.
+  ifeq ($(HOST_OS)-$(BUILD_OS),windows-linux)
+    CCACHE_HOST_TAG := linux-$(BUILD_ARCH)
   endif
-  ifneq ($(ccache),$(firstword $($(combo_target)CXX)))
-    $(combo_target)CXX := $(ccache) $($(combo_target)CXX)
+  ccache := prebuilt/$(CCACHE_HOST_TAG)/ccache/ccache
+  # Check that the executable is here.
+  ccache := $(strip $(wildcard $(ccache)))
+  ifdef ccache
+    # prepend ccache if necessary
+    ifneq ($(ccache),$(firstword $($(combo_target)CC)))
+      $(combo_target)CC := $(ccache) $($(combo_target)CC)
+    endif
+    ifneq ($(ccache),$(firstword $($(combo_target)CXX)))
+      $(combo_target)CXX := $(ccache) $($(combo_target)CXX)
+    endif
+    ccache =
   endif
-  ccache =
 endif
diff --git a/core/config.mk b/core/config.mk
index f8bee80..2f3b3ee 100644
--- a/core/config.mk
+++ b/core/config.mk
@@ -106,6 +106,9 @@
 # Default is to prelink modules.
 TARGET_PRELINK_MODULE := true
 
+# Default shell is ash. Other possible value is mksh.
+TARGET_SHELL := ash
+
 # ###############################################################
 # Include sub-configuration files
 # ###############################################################
@@ -197,6 +200,7 @@
 DOXYGEN:= doxygen
 AAPT := $(HOST_OUT_EXECUTABLES)/aapt$(HOST_EXECUTABLE_SUFFIX)
 AIDL := $(HOST_OUT_EXECUTABLES)/aidl$(HOST_EXECUTABLE_SUFFIX)
+PROTOC := $(HOST_OUT_EXECUTABLES)/aprotoc$(HOST_EXECUTABLE_SUFFIX)
 ICUDATA := $(HOST_OUT_EXECUTABLES)/icudata$(HOST_EXECUTABLE_SUFFIX)
 SIGNAPK_JAR := $(HOST_OUT_JAVA_LIBRARIES)/signapk$(COMMON_JAVA_PACKAGE_SUFFIX)
 MKBOOTFS := $(HOST_OUT_EXECUTABLES)/mkbootfs$(HOST_EXECUTABLE_SUFFIX)
@@ -207,7 +211,7 @@
 FS_GET_STATS := $(HOST_OUT_EXECUTABLES)/fs_get_stats$(HOST_EXECUTABLE_SUFFIX)
 MKEXT2IMG := $(HOST_OUT_EXECUTABLES)/genext2fs$(HOST_EXECUTABLE_SUFFIX)
 MAKE_EXT4FS := $(HOST_OUT_EXECUTABLES)/make_ext4fs$(HOST_EXECUTABLE_SUFFIX)
-MKEXT2USERIMG := $(HOST_OUT_EXECUTABLES)/mkuserimg.sh
+MKEXTUSERIMG := $(HOST_OUT_EXECUTABLES)/mkuserimg.sh
 MKEXT2BOOTIMG := external/genext2fs/mkbootimg_ext2.sh
 MKTARBALL := build/tools/mktarball.sh
 TUNE2FS := tune2fs
@@ -232,7 +236,6 @@
 # Binary prelinker/compressor tools
 APRIORI := $(HOST_OUT_EXECUTABLES)/apriori$(HOST_EXECUTABLE_SUFFIX)
 LSD := $(HOST_OUT_EXECUTABLES)/lsd$(HOST_EXECUTABLE_SUFFIX)
-SOSLIM := $(HOST_OUT_EXECUTABLES)/soslim$(HOST_EXECUTABLE_SUFFIX)
 
 # Deal with archaic version of bison on Mac OS X.
 ifeq ($(filter 1.28,$(shell $(YACC) -V)),)
@@ -353,3 +356,13 @@
     $(wildcard $(HISTORICAL_NDK_VERSIONS_ROOT)/android-ndk-r*)))
 
 INTERNAL_PLATFORM_API_FILE := $(TARGET_OUT_COMMON_INTERMEDIATES)/PACKAGING/public_api.xml
+
+# This is the standard way to name a directory containing prebuilt target
+# objects. E.g., prebuilt/$(TARGET_PREBUILT_TAG)/libc.so
+ifeq ($(TARGET_SIMULATOR),true)
+  TARGET_PREBUILT_TAG := $(TARGET_OS)-$(TARGET_ARCH)
+else
+  TARGET_PREBUILT_TAG := android-$(TARGET_ARCH)
+endif
+
+include $(BUILD_SYSTEM)/dumpvar.mk
diff --git a/core/definitions.mk b/core/definitions.mk
index 11cea3f..6e7a5ad 100644
--- a/core/definitions.mk
+++ b/core/definitions.mk
@@ -154,7 +154,7 @@
 
 # $(1): List of directories to look for under this directory
 define all-named-subdir-makefiles
-$(wildcard $(addsuffix /Android.mk, $(addprefix $(my-dir)/,$(1))))
+$(wildcard $(addsuffix /Android.mk, $(addprefix $(call my-dir)/,$(1))))
 endef
 
 ###########################################################
@@ -236,6 +236,19 @@
 endef
 
 ###########################################################
+## Find all of the .proto files under the named directories.
+## Meant to be used like:
+##    SRC_FILES := $(call all-proto-files-under,src)
+###########################################################
+
+define all-proto-files-under
+$(patsubst ./%,%, \
+  $(shell cd $(LOCAL_PATH) ; \
+          find $(1) -name "*.proto" -and -not -name ".*") \
+  )
+endef
+
+###########################################################
 ## Find all of the html files under the named directories.
 ## Meant to be used like:
 ##    SRC_FILES := $(call all-html-files-under,src tests)
@@ -666,6 +679,7 @@
 @echo PRIVATE_ALL_STATIC_LIBRARIES=$(PRIVATE_ALL_STATIC_LIBRARIES);
 @echo PRIVATE_ALL_WHOLE_STATIC_LIBRARIES=$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES);
 @echo PRIVATE_ALL_OBJECTS=$(PRIVATE_ALL_OBJECTS);
+@echo PRIVATE_NO_CRT=$(PRIVATE_NO_CRT);
 endef
 
 ###########################################################
@@ -746,6 +760,36 @@
 
 
 ###########################################################
+## Commands for running protoc to compile .proto into .java
+###########################################################
+
+define transform-proto-to-java
+@mkdir -p $(dir $@)
+@echo "Protoc: $@ <= $(PRIVATE_PROTO_SRC_FILES)"
+@rm -rf $(PRIVATE_PROTO_JAVA_OUTPUT_DIR)
+@mkdir -p $(PRIVATE_PROTO_JAVA_OUTPUT_DIR)
+$(hide) $(PROTOC) \
+	$(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \
+	$(PRIVATE_PROTO_JAVA_OUTPUT_OPTION)=$(PRIVATE_PROTO_JAVA_OUTPUT_DIR) \
+	$(PRIVATE_PROTOC_FLAGS) \
+	$(PRIVATE_PROTO_SRC_FILES)
+$(hide) touch $@
+endef
+
+######################################################################
+## Commands for running protoc to compile .proto into .pb.cc and .pb.h
+######################################################################
+define transform-proto-to-cc
+@mkdir -p $(dir $@)
+@echo "Protoc: $@ <= $<"
+$(hide) $(PROTOC) \
+	$(addprefix --proto_path=, $(PRIVATE_PROTO_INCLUDES)) \
+	$(PRIVATE_PROTOC_FLAGS) \
+	--cpp_out=$(PRIVATE_PROTO_CC_OUTPUT_DIR) $<
+endef
+
+
+###########################################################
 ## Commands for running gcc to compile a C++ file
 ###########################################################
 
@@ -927,7 +971,7 @@
 $(call transform-host-c-or-s-to-o-no-deps)
 endef
 
-define tranform-host-m-to-o
+define transform-host-m-to-o
 $(transform-host-m-to-o-no-deps)
 $(transform-d-to-p)
 endef
@@ -936,6 +980,24 @@
 ## Commands for running ar
 ###########################################################
 
+define _concat-if-arg2-not-empty
+$(if $(2),$(hide) $(1) $(2))
+endef
+
+# Split long argument list into smaller groups and call the command repeatedly
+#
+# $(1): the command without arguments
+# $(2): the arguments
+define split-long-arguments
+$(call _concat-if-arg2-not-empty,$(1),$(wordlist 1,500,$(2)))
+$(call _concat-if-arg2-not-empty,$(1),$(wordlist 501,1000,$(2)))
+$(call _concat-if-arg2-not-empty,$(1),$(wordlist 1001,1500,$(2)))
+$(call _concat-if-arg2-not-empty,$(1),$(wordlist 1501,2000,$(2)))
+$(call _concat-if-arg2-not-empty,$(1),$(wordlist 2001,2500,$(2)))
+$(call _concat-if-arg2-not-empty,$(1),$(wordlist 2501,3000,$(2)))
+$(call _concat-if-arg2-not-empty,$(1),$(wordlist 3001,99999,$(2)))
+endef
+
 define extract-and-include-target-whole-static-libs
 $(foreach lib,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES), \
 	$(hide) echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(lib)]"; \
@@ -958,8 +1020,7 @@
 @rm -f $@
 $(extract-and-include-target-whole-static-libs)
 @echo "target StaticLib: $(PRIVATE_MODULE) ($@)"
-$(hide) echo $(filter %.o, $^) | \
-    xargs $(TARGET_AR) $(TARGET_GLOBAL_ARFLAGS) $(PRIVATE_ARFLAGS) $@
+$(call split-long-arguments,$(TARGET_AR) $(TARGET_GLOBAL_ARFLAGS) $(PRIVATE_ARFLAGS) $@,$(filter %.o, $^))
 endef
 
 ###########################################################
@@ -968,7 +1029,7 @@
 
 define extract-and-include-host-whole-static-libs
 $(foreach lib,$(PRIVATE_ALL_WHOLE_STATIC_LIBRARIES), \
-	@echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(lib)]"; \
+	$(hide) echo "preparing StaticLib: $(PRIVATE_MODULE) [including $(lib)]"; \
 	ldir=$(PRIVATE_INTERMEDIATES_DIR)/WHOLE/$(basename $(notdir $(lib)))_objs;\
 	rm -rf $$ldir; \
 	mkdir -p $$ldir; \
@@ -988,8 +1049,7 @@
 @rm -f $@
 $(extract-and-include-host-whole-static-libs)
 @echo "host StaticLib: $(PRIVATE_MODULE) ($@)"
-echo $(filter %.o, $^) | \
-	xargs $(HOST_AR) $(HOST_GLOBAL_ARFLAGS) $(PRIVATE_ARFLAGS) $@
+$(call split-long-arguments,$(HOST_AR) $(HOST_GLOBAL_ARFLAGS) $(PRIVATE_ARFLAGS) $@,$(filter %.o, $^))
 endef
 
 
@@ -1086,13 +1146,10 @@
 ## Commands for filtering a target executable or library
 ###########################################################
 
-# Because of bug 743462 ("Prelinked image magic gets stripped
-# by arm-elf-objcopy"), we have to use soslim to strip target
-# binaries.
 define transform-to-stripped
 @mkdir -p $(dir $@)
 @echo "target Strip: $(PRIVATE_MODULE) ($@)"
-$(hide) $(SOSLIM) --strip --shady --quiet $< --outfile $@
+$(hide) $(TARGET_STRIP_COMMAND)
 endef
 
 define transform-to-prelinked
@@ -1231,7 +1288,7 @@
 ifeq ($(HOST_OS),windows)
 xlint_unchecked :=
 else
-#xlint_unchecked := -Xlint:unchecked
+xlint_unchecked := -Xlint:unchecked
 endif
 
 # emit-line, <word list>, <output file>
@@ -1301,7 +1358,8 @@
 $(hide) $(TARGET_JAVAC) -encoding ascii $(PRIVATE_BOOTCLASSPATH) \
     $(addprefix -classpath ,$(strip \
         $(call normalize-path-list,$(PRIVATE_ALL_JAVA_LIBRARIES)))) \
-    $(PRIVATE_JAVACFLAGS) $(strip $(PRIVATE_JAVAC_DEBUG_FLAGS)) $(xlint_unchecked) \
+    $(PRIVATE_JAVACFLAGS) $(strip $(PRIVATE_JAVAC_DEBUG_FLAGS)) \
+	$(if $(findstring true,$(LOCAL_WARNINGS_ENABLE)),$(xlint_unchecked),) \
     -extdirs "" -d $(PRIVATE_CLASS_INTERMEDIATES_DIR) \
     \@$(dir $(PRIVATE_CLASS_INTERMEDIATES_DIR))/java-source-list-uniq \
     || ( rm -rf $(PRIVATE_CLASS_INTERMEDIATES_DIR) ; exit 41 )
@@ -1656,10 +1714,11 @@
 
 # Convert a partition data size (eg, as reported in /proc/mtd) to the
 # size of the image used to flash that partition (which includes a
-# 64-byte spare area for each 2048-byte page).
+# spare area for each page).
 # $(1): the partition data size
 define image-size-from-data-size
-$(shell echo $$(($(1) / 2048 * (2048+64))))
+$(shell echo $$(($(1) / $(BOARD_NAND_PAGE_SIZE) * \
+  ($(BOARD_NAND_PAGE_SIZE)+$(BOARD_NAND_SPARE_SIZE)))))
 endef
 
 # $(1): The file(s) to check (often $@)
diff --git a/core/dumpvar.mk b/core/dumpvar.mk
new file mode 100644
index 0000000..0c58559
--- /dev/null
+++ b/core/dumpvar.mk
@@ -0,0 +1,78 @@
+# ---------------------------------------------------------------
+# the setpath shell function in envsetup.sh uses this to figure out
+# what to add to the path given the config we have chosen.
+ifeq ($(CALLED_FROM_SETUP),true)
+
+ABP:=$(PWD)/$(HOST_OUT_EXECUTABLES)
+
+ifeq ($(TARGET_SIMULATOR),true)
+	ABP:=$(ABP):$(TARGET_OUT_EXECUTABLES)
+else
+	# this should be copied to HOST_OUT_EXECUTABLES instead
+	ABP:=$(ABP):$(PWD)/prebuilt/$(HOST_PREBUILT_TAG)/toolchain/arm-eabi-4.4.3/bin
+endif
+ANDROID_BUILD_PATHS := $(ABP)
+ANDROID_PREBUILTS := prebuilt/$(HOST_PREBUILT_TAG)
+
+# The "dumpvar" stuff lets you say something like
+#
+#     CALLED_FROM_SETUP=true \
+#       make -f config/envsetup.make dumpvar-TARGET_OUT
+# or
+#     CALLED_FROM_SETUP=true \
+#       make -f config/envsetup.make dumpvar-abs-HOST_OUT_EXECUTABLES
+#
+# The plain (non-abs) version just dumps the value of the named variable.
+# The "abs" version will treat the variable as a path, and dumps an
+# absolute path to it.
+#
+dumpvar_goals := \
+	$(strip $(patsubst dumpvar-%,%,$(filter dumpvar-%,$(MAKECMDGOALS))))
+ifdef dumpvar_goals
+
+  ifneq ($(words $(dumpvar_goals)),1)
+    $(error Only one "dumpvar-" goal allowed. Saw "$(MAKECMDGOALS)")
+  endif
+
+  # If the goal is of the form "dumpvar-abs-VARNAME", then
+  # treat VARNAME as a path and return the absolute path to it.
+  absolute_dumpvar := $(strip $(filter abs-%,$(dumpvar_goals)))
+  ifdef absolute_dumpvar
+    dumpvar_goals := $(patsubst abs-%,%,$(dumpvar_goals))
+    DUMPVAR_VALUE := $(PWD)/$($(dumpvar_goals))
+    dumpvar_target := dumpvar-abs-$(dumpvar_goals)
+  else
+    DUMPVAR_VALUE := $($(dumpvar_goals))
+    dumpvar_target := dumpvar-$(dumpvar_goals)
+  endif
+
+.PHONY: $(dumpvar_target)
+$(dumpvar_target):
+	@echo $(DUMPVAR_VALUE)
+
+endif # dumpvar_goals
+
+ifneq ($(dumpvar_goals),report_config)
+PRINT_BUILD_CONFIG:=
+endif
+
+endif # CALLED_FROM_SETUP
+
+
+ifneq ($(PRINT_BUILD_CONFIG),)
+$(info ============================================)
+$(info   PLATFORM_VERSION_CODENAME=$(PLATFORM_VERSION_CODENAME))
+$(info   PLATFORM_VERSION=$(PLATFORM_VERSION))
+$(info   TARGET_PRODUCT=$(TARGET_PRODUCT))
+$(info   TARGET_BUILD_VARIANT=$(TARGET_BUILD_VARIANT))
+$(info   TARGET_SIMULATOR=$(TARGET_SIMULATOR))
+$(info   TARGET_BUILD_TYPE=$(TARGET_BUILD_TYPE))
+$(info   TARGET_BUILD_APPS=$(TARGET_BUILD_APPS))
+$(info   TARGET_ARCH=$(TARGET_ARCH))
+$(info   TARGET_ARCH_VARIANT=$(TARGET_ARCH_VARIANT))
+$(info   HOST_ARCH=$(HOST_ARCH))
+$(info   HOST_OS=$(HOST_OS))
+$(info   HOST_BUILD_TYPE=$(HOST_BUILD_TYPE))
+$(info   BUILD_ID=$(BUILD_ID))
+$(info ============================================)
+endif
diff --git a/core/dynamic_binary.mk b/core/dynamic_binary.mk
index cfbe740..005ccf3 100644
--- a/core/dynamic_binary.mk
+++ b/core/dynamic_binary.mk
@@ -75,7 +75,7 @@
 $(error Symbol compression not yet supported.)
 compress_output := $(intermediates)/COMPRESSED-$(LOCAL_BUILT_MODULE_STEM)
 
-#TODO: write the real $(SOSLIM) rule.
+#TODO: write the real $(STRIPPER) rule.
 #TODO: define a rule to build TARGET_SYMBOL_FILTER_FILE, and
 #      make it depend on ALL_ORIGINAL_DYNAMIC_BINARIES.
 $(compress_output): $(compress_input) $(TARGET_SYMBOL_FILTER_FILE) | $(ACP)
@@ -94,7 +94,7 @@
 # The output of the prelink step is the binary we want to use
 # for symbolic debugging;  the prelink step may move sections
 # around, so we have to use this version.
-prelink_output := $(LOCAL_UNSTRIPPED_PATH)/$(LOCAL_MODULE_SUBDIR)$(LOCAL_BUILT_MODULE_STEM)
+prelink_output := $(LOCAL_UNSTRIPPED_PATH)/$(LOCAL_BUILT_MODULE_STEM)
 
 # Skip prelinker if it is FDO instrumentation build.
 ifneq ($(strip $(BUILD_FDO_INSTRUMENT)),)
@@ -137,7 +137,7 @@
 
 ifeq ($(LOCAL_STRIP_MODULE),true)
 # Strip the binary
-$(strip_output): $(strip_input) | $(SOSLIM)
+$(strip_output): $(strip_input) | $(TARGET_STRIP)
 	$(transform-to-stripped)
 else
 # Don't strip the binary, just copy it.  We can't skip this step
diff --git a/core/envsetup.mk b/core/envsetup.mk
index c70a5e2..e4c99d5 100644
--- a/core/envsetup.mk
+++ b/core/envsetup.mk
@@ -26,7 +26,7 @@
 ifeq ($(TARGET_SIMULATOR),true)
 TARGET_PRODUCT := sim
 else
-TARGET_PRODUCT := generic
+TARGET_PRODUCT := full
 endif
 endif
 
@@ -158,14 +158,6 @@
 TARGET_BUILD_TYPE := release
 endif
 
-# This is the standard way to name a directory containing prebuilt target
-# objects. E.g., prebuilt/$(TARGET_PREBUILT_TAG)/libc.so
-ifeq ($(TARGET_SIMULATOR),true)
-  TARGET_PREBUILT_TAG := $(TARGET_OS)-$(TARGET_ARCH)
-else
-  TARGET_PREBUILT_TAG := android-$(TARGET_ARCH)
-endif
-
 # ---------------------------------------------------------------
 # figure out the output directories
 
@@ -283,81 +275,3 @@
 ifeq ($(PRINT_BUILD_CONFIG),)
 PRINT_BUILD_CONFIG := true
 endif
-
-# ---------------------------------------------------------------
-# the setpath shell function in envsetup.sh uses this to figure out
-# what to add to the path given the config we have chosen.
-ifeq ($(CALLED_FROM_SETUP),true)
-
-ABP:=$(PWD)/$(HOST_OUT_EXECUTABLES)
-
-ifeq ($(TARGET_SIMULATOR),true)
-	ABP:=$(ABP):$(TARGET_OUT_EXECUTABLES)
-else
-	# this should be copied to HOST_OUT_EXECUTABLES instead
-	ABP:=$(ABP):$(PWD)/prebuilt/$(HOST_PREBUILT_TAG)/toolchain/arm-eabi-4.4.3/bin
-endif
-ANDROID_BUILD_PATHS := $(ABP)
-ANDROID_PREBUILTS := prebuilt/$(HOST_PREBUILT_TAG)
-
-# The "dumpvar" stuff lets you say something like
-#
-#     CALLED_FROM_SETUP=true \
-#       make -f config/envsetup.make dumpvar-TARGET_OUT
-# or
-#     CALLED_FROM_SETUP=true \
-#       make -f config/envsetup.make dumpvar-abs-HOST_OUT_EXECUTABLES
-#
-# The plain (non-abs) version just dumps the value of the named variable.
-# The "abs" version will treat the variable as a path, and dumps an
-# absolute path to it.
-#
-dumpvar_goals := \
-	$(strip $(patsubst dumpvar-%,%,$(filter dumpvar-%,$(MAKECMDGOALS))))
-ifdef dumpvar_goals
-
-  ifneq ($(words $(dumpvar_goals)),1)
-    $(error Only one "dumpvar-" goal allowed. Saw "$(MAKECMDGOALS)")
-  endif
-
-  # If the goal is of the form "dumpvar-abs-VARNAME", then
-  # treat VARNAME as a path and return the absolute path to it.
-  absolute_dumpvar := $(strip $(filter abs-%,$(dumpvar_goals)))
-  ifdef absolute_dumpvar
-    dumpvar_goals := $(patsubst abs-%,%,$(dumpvar_goals))
-    DUMPVAR_VALUE := $(PWD)/$($(dumpvar_goals))
-    dumpvar_target := dumpvar-abs-$(dumpvar_goals)
-  else
-    DUMPVAR_VALUE := $($(dumpvar_goals))
-    dumpvar_target := dumpvar-$(dumpvar_goals)
-  endif
-
-.PHONY: $(dumpvar_target)
-$(dumpvar_target):
-	@echo $(DUMPVAR_VALUE)
-
-endif # dumpvar_goals
-
-ifneq ($(dumpvar_goals),report_config)
-PRINT_BUILD_CONFIG:=
-endif
-
-endif # CALLED_FROM_SETUP
-
-
-ifneq ($(PRINT_BUILD_CONFIG),)
-$(info ============================================)
-$(info   PLATFORM_VERSION_CODENAME=$(PLATFORM_VERSION_CODENAME))
-$(info   PLATFORM_VERSION=$(PLATFORM_VERSION))
-$(info   TARGET_PRODUCT=$(TARGET_PRODUCT))
-$(info   TARGET_BUILD_VARIANT=$(TARGET_BUILD_VARIANT))
-$(info   TARGET_SIMULATOR=$(TARGET_SIMULATOR))
-$(info   TARGET_BUILD_TYPE=$(TARGET_BUILD_TYPE))
-$(info   TARGET_BUILD_APPS=$(TARGET_BUILD_APPS))
-$(info   TARGET_ARCH=$(TARGET_ARCH))
-$(info   HOST_ARCH=$(HOST_ARCH))
-$(info   HOST_OS=$(HOST_OS))
-$(info   HOST_BUILD_TYPE=$(HOST_BUILD_TYPE))
-$(info   BUILD_ID=$(BUILD_ID))
-$(info ============================================)
-endif
diff --git a/core/find-jdk-tools-jar.sh b/core/find-jdk-tools-jar.sh
index e772a15..20d7d4d 100755
--- a/core/find-jdk-tools-jar.sh
+++ b/core/find-jdk-tools-jar.sh
@@ -3,12 +3,12 @@
 else
     JAVAC=$(which javac)
     if [ -z "$JAVAC" ] ; then
-	echo "Please-install-JDK-6.0,-which-you-can-download-from-java.sun.com"
+	echo "Please-install-JDK-6,-which-you-can-download-from-java.sun.com"
 	exit 1
     fi
-    while [ -L $JAVAC ] ; do
-        LSLINE=$(ls -l $JAVAC)
-        JAVAC=$(echo -n $LSLINE | sed -e "s/.* -> //")
+    while [ -L "$JAVAC" ] ; do
+        LSLINE=$(ls -l "$JAVAC")
+        JAVAC=$(echo -n "$LSLINE" | sed -e "s/.* -> //")
     done
     echo $JAVAC | sed -e "s:\(.*\)/bin/javac.*:\\1/lib/tools.jar:"
 fi
diff --git a/core/java.mk b/core/java.mk
index 6b8d04d..35b0343 100644
--- a/core/java.mk
+++ b/core/java.mk
@@ -32,6 +32,16 @@
     LOCAL_JAVA_LIBRARIES := core core-junit ext framework $(LOCAL_JAVA_LIBRARIES)
   endif
 endif
+
+proto_sources := $(filter %.proto,$(LOCAL_SRC_FILES))
+ifneq ($(proto_sources),)
+ifeq ($(LOCAL_PROTOC_OPTIMIZE_TYPE),micro)
+    LOCAL_STATIC_JAVA_LIBRARIES += libprotobuf-java-2.3.0-micro
+else
+    LOCAL_STATIC_JAVA_LIBRARIES += libprotobuf-java-2.3.0-lite
+endif
+endif
+
 LOCAL_JAVA_LIBRARIES := $(sort $(LOCAL_JAVA_LIBRARIES))
 
 LOCAL_BUILT_MODULE_STEM := $(strip $(LOCAL_BUILT_MODULE_STEM))
@@ -167,7 +177,8 @@
 # Deps for generated source files must be handled separately,
 # via deps on the target that generates the sources.
 $(full_classes_compiled_jar): PRIVATE_JAVACFLAGS := $(LOCAL_JAVACFLAGS)
-$(full_classes_compiled_jar): $(java_sources) $(java_resource_sources) $(full_java_lib_deps) $(jar_manifest_file)
+$(full_classes_compiled_jar): $(java_sources) $(java_resource_sources) $(full_java_lib_deps) $(jar_manifest_file) \
+	$(RenderScript_file_stamp) $(proto_java_sources_file_stamp)
 	$(transform-java-to-classes.jar)
 
 # All of the rules after full_classes_compiled_jar are very unlikely
diff --git a/core/main.mk b/core/main.mk
index 3da0648..ab49415 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -31,11 +31,11 @@
 #endif
 
 # check for broken versions of make
-ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") \>= 3.81))
+ifeq (0,$(shell expr $$(echo $(MAKE_VERSION) | sed "s/[^0-9\.].*//") = 3.81))
 $(warning ********************************************************************************)
 $(warning *  You are using version $(MAKE_VERSION) of make.)
-$(warning *  You must upgrade to version 3.81 or greater.)
-$(warning *  see http://source.android.com/download)
+$(warning *  Android can only be built by version 3.81.)
+$(warning *  see http://source.android.com/source/download.html)
 $(warning ********************************************************************************)
 $(error stopping)
 endif
@@ -113,7 +113,7 @@
 $(info The correct version is: 1.6.)
 $(info $(space))
 $(info Please follow the machine setup instructions at)
-$(info $(space)$(space)$(space)$(space)http://source.android.com/download)
+$(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html)
 $(info ************************************************************)
 $(error stop)
 endif
@@ -129,7 +129,7 @@
 $(info The correct version is: 1.6.)
 $(info $(space))
 $(info Please follow the machine setup instructions at)
-$(info $(space)$(space)$(space)$(space)http://source.android.com/download)
+$(info $(space)$(space)$(space)$(space)http://source.android.com/source/download.html)
 $(info ************************************************************)
 $(error stop)
 endif
@@ -141,7 +141,7 @@
 # These are the modifier targets that don't do anything themselves, but
 # change the behavior of the build.
 # (must be defined before including definitions.make)
-INTERNAL_MODIFIER_TARGETS := showcommands checkbuild
+INTERNAL_MODIFIER_TARGETS := showcommands checkbuild all
 
 # Bring in standard build system definitions.
 include $(BUILD_SYSTEM)/definitions.mk
@@ -380,17 +380,18 @@
 	dalvik/libdex \
 	dalvik/tools/dmtracedump \
 	dalvik/tools/hprof-conv \
-	development/tools/line_endings \
-	development/tools/etc1tool \
-	sdk/emulator/mksdcard \
-	sdk/sdklauncher \
 	development/host \
+	development/tools/etc1tool \
+	development/tools/line_endings \
+	external/easymock \
 	external/expat \
 	external/libpng \
 	external/qemu \
 	external/sqlite/dist \
 	external/zlib \
 	frameworks/base \
+	sdk/emulator/mksdcard \
+	sdk/sdklauncher \
 	system/core/adb \
 	system/core/fastboot \
 	system/core/libcutils \
@@ -407,13 +408,17 @@
 	sdk/archquery \
 	sdk/androidprefs \
 	sdk/apkbuilder \
+	sdk/common \
+	sdk/ddms \
+	sdk/hierarchyviewer2 \
+	sdk/ide_common \
 	sdk/jarutils \
 	sdk/layoutlib_api \
-	sdk/layoutlib_utils \
+	sdk/layoutopt \
 	sdk/ninepatch \
 	sdk/sdkstats \
 	sdk/sdkmanager \
-	sdk/layoutopt \
+	sdk/swtmenubar \
 	development/apps \
 	development/tools/mkstubs \
 	packages
@@ -568,7 +573,7 @@
 endif
 # Use tags to get the non-APPS user modules.  Use the product
 # definition files to get the APPS user modules.
-user_MODULES := $(sort $(call get-tagged-modules,user))
+user_MODULES := $(sort $(call get-tagged-modules,user shell_$(TARGET_SHELL)))
 user_MODULES := $(user_MODULES) $(user_PACKAGES)
 
 eng_MODULES := $(sort $(call get-tagged-modules,eng))
@@ -667,6 +672,9 @@
 .PHONY: systemtarball
 systemtarball: $(INSTALLED_SYSTEMTARBALL_TARGET)
 
+.PHONY: boottarball
+boottarball: $(INSTALLED_BOOTTARBALL_TARGET)
+
 .PHONY: userdataimage
 userdataimage: $(INSTALLED_USERDATAIMAGE_TARGET)
 
diff --git a/core/notice_files.mk b/core/notice_files.mk
index fd76d51..74beb49 100644
--- a/core/notice_files.mk
+++ b/core/notice_files.mk
@@ -2,9 +2,9 @@
 ## Track NOTICE files
 ###########################################################
 
-notice_file:=$(shell find $(LOCAL_PATH) -maxdepth 1 -name NOTICE)
+notice_file:=$(strip $(wildcard $(LOCAL_PATH)/NOTICE))
 
-ifneq ($(strip $(notice_file)),)
+ifdef notice_file
 
 # This relies on the name of the directory in PRODUCT_OUT matching where
 # it's installed on the target - i.e. system, data, etc.  This does
diff --git a/core/pathmap.mk b/core/pathmap.mk
index 6cd3b8f..fe7ba1a 100644
--- a/core/pathmap.mk
+++ b/core/pathmap.mk
@@ -82,6 +82,7 @@
 	    graphics \
 	    location \
 	    media \
+	    drm \
 	    opengl \
 	    sax \
 	    telephony \
diff --git a/core/shared_library.mk b/core/shared_library.mk
index 77d253f..0393d17 100644
--- a/core/shared_library.mk
+++ b/core/shared_library.mk
@@ -35,11 +35,8 @@
 my_target_crtend_so_o := $(TARGET_CRTEND_SO_O)
 ifdef LOCAL_NDK_VERSION
 my_target_global_ld_dirs += -L$(my_ndk_version_root)/usr/lib
-# The latest ndk does NOT support TARGET_CRTBEGIN_SO_O and TARGET_CRTEND_SO_O yet.
-# my_target_crtbegin_so_o := $(my_ndk_version_root)/usr/lib/crtbegin_so.o
-# my_target_crtend_so_o := $(my_ndk_version_root)/usr/lib/crtend_so.o
-my_target_crtbegin_so_o :=
-my_target_crtend_so_o :=
+my_target_crtbegin_so_o := $(wildcard $(my_ndk_version_root)/usr/lib/crtbegin_so.o)
+my_target_crtend_so_o := $(wildcard $(my_ndk_version_root)/usr/lib/crtend_so.o)
 endif
 $(linked_module): PRIVATE_TARGET_GLOBAL_LD_DIRS := $(my_target_global_ld_dirs)
 $(linked_module): PRIVATE_TARGET_GLOBAL_LDFLAGS := $(my_target_global_ldflags)
diff --git a/core/tasks/sdk-addon.mk b/core/tasks/sdk-addon.mk
index e21fedc..8408676 100644
--- a/core/tasks/sdk-addon.mk
+++ b/core/tasks/sdk-addon.mk
@@ -55,10 +55,10 @@
 
 # All SDK add-ons have these files
 files_to_copy += \
-        $(BUILT_SYSTEMIMAGE):images/system.img \
-        $(BUILT_USERDATAIMAGE_TARGET):images/userdata.img \
-        $(BUILT_RAMDISK_TARGET):images/ramdisk.img \
-        $(target_notice_file_txt):images/NOTICE.txt
+        $(BUILT_SYSTEMIMAGE):images/$(TARGET_CPU_ABI)/system.img \
+        $(BUILT_USERDATAIMAGE_TARGET):images/$(TARGET_CPU_ABI)/userdata.img \
+        $(BUILT_RAMDISK_TARGET):images/$(TARGET_CPU_ABI)/ramdisk.img \
+        $(target_notice_file_txt):images/$(TARGET_CPU_ABI)/NOTICE.txt
 
 # Generate rules to copy the requested files
 $(foreach cf,$(files_to_copy), \
diff --git a/core/user_tags.mk b/core/user_tags.mk
index 3d8e5a6..3eade8a 100644
--- a/core/user_tags.mk
+++ b/core/user_tags.mk
@@ -53,6 +53,8 @@
 	asm-3.1 \
 	atree \
 	audio \
+	badblocks \
+	badblocks_host \
 	bb2sym \
 	bb_dump \
 	bbprof \
@@ -79,6 +81,8 @@
 	dasm \
 	dbus-daemon \
 	ddmlib \
+	ddmlibTests \
+	ddmlib-prebuilt \
 	ddms \
 	ddmuilib \
 	debuggerd \
@@ -98,6 +102,8 @@
 	dumpstate \
 	dumpsys \
 	dx-tests \
+	e2fsck \
+	e2fsck_host \
 	easymock \
 	edify \
 	emmalib \
@@ -131,6 +137,9 @@
 	gzip \
 	hciattach \
 	hierarchyviewer \
+	hierarchyviewer1 \
+	hierarchyviewer2 \
+	hierarchyviewerlib \
 	hist_trace \
 	hosttestlib \
 	icudata \
@@ -150,6 +159,7 @@
 	jdwpspy \
 	jfreechart-1.0.9 \
 	jfreechart-1.0.9-swt \
+	jsilver \
 	jsr305 \
 	jsr305lib \
 	junit \
@@ -190,12 +200,14 @@
 	libcameraservice \
 	libcamerastub \
 	libc_common \
+	libchromium_net \
 	libc_nomalloc \
 	libctest \
 	libcutils \
 	libdb \
 	libdbus \
 	libdiskconfig \
+	libdiskconfig_host \
 	libdl \
 	libdrm1 \
 	libdrm1_jni \
@@ -212,6 +224,18 @@
 	libETC1 \
 	libexif \
 	libext \
+	libext2fs \
+	libext2fs_host \
+	libext2_blkid \
+	libext2_blkid_host \
+	libext2_com_err \
+	libext2_com_err_host \
+	libext2_e2p \
+	libext2_e2p_host \
+	libext2_profile \
+	libext2_profile_host \
+	libext2_uuid \
+	libext2_uuid_host \
 	libfdlibm \
 	libfdlibm-host \
 	libFFTEm \
@@ -222,11 +246,13 @@
 	libGLES_android \
 	libGLESv1_CM \
 	libGLESv2 \
+	libglib \
 	libglib_static \
 	libgui \
 	libhardware \
 	libhardware_legacy \
 	libhost \
+	libhyphenation \
 	libiprouteutil \
 	libiptc \
 	libjnigraphics \
@@ -348,6 +374,7 @@
 	libwpa_client \
 	libwrapsim \
 	libxml2 \
+	libxslt \
 	libzipfile \
 	lights.kraken \
 	lights.qsd8k \
@@ -368,6 +395,8 @@
 	minigzip \
 	mkbootfs \
 	mkbootimg \
+	mke2fs \
+	mke2fs_host \
 	mksdcard \
 	mksnapshot \
 	mkstubs \
@@ -375,10 +404,12 @@
 	mkyaffs2image \
 	monkey \
 	monkeyrunner \
+	MonkeyRunnerTest \
 	mtpd \
 	ndc \
 	netcfg \
 	netd \
+	network \
 	ninepatch \
 	oauth \
 	obbtool \
@@ -401,6 +432,7 @@
 	profile_trace \
 	q2dm \
 	q2g \
+	qemu-android \
 	qwerty2.kcm \
 	qwerty.kcm \
 	racoon \
@@ -408,6 +440,8 @@
 	read_method \
 	read_pid \
 	read_trace \
+	resize2fs \
+	resize2fs_host \
 	rgb2565 \
 	rild \
 	rsg-generator \
@@ -457,6 +491,8 @@
 	test_zipfile \
 	toolbox \
 	traceview \
+	tune2fs \
+	tune2fs_host \
 	tuttle2.kcm \
 	uix \
 	usbtest \
diff --git a/core/version_defaults.mk b/core/version_defaults.mk
index be4826f..b38efe3 100644
--- a/core/version_defaults.mk
+++ b/core/version_defaults.mk
@@ -41,7 +41,7 @@
   # which is the version that we reveal to the end user.
   # Update this value when the platform version changes (rather
   # than overriding it somewhere else).  Can be an arbitrary string.
-  PLATFORM_VERSION := 2.3.4
+  PLATFORM_VERSION := 3.1.4.1.5.9.2.6.5
 endif
 
 ifeq "" "$(PLATFORM_SDK_VERSION)"
@@ -59,7 +59,7 @@
 ifeq "" "$(PLATFORM_VERSION_CODENAME)"
   # This is the current development code-name, if the build is not a final
   # release build.  If this is a final release build, it is simply "REL".
-  PLATFORM_VERSION_CODENAME := REL
+  PLATFORM_VERSION_CODENAME := AOSP
 endif
 
 ifeq "" "$(DEFAULT_APP_TARGET_SDK)"
diff --git a/envsetup.sh b/envsetup.sh
index a68f73e..c94ca7b 100644
--- a/envsetup.sh
+++ b/envsetup.sh
@@ -311,7 +311,7 @@
         if [ "$TARGET_SIMULATOR" = true ] ; then
             default_value=sim
         else
-            default_value=generic
+            default_value=full
         fi
     fi
 
@@ -376,7 +376,7 @@
             export TARGET_BUILD_VARIANT=$default_value
         elif (echo -n $ANSWER | grep -q -e "^[0-9][0-9]*$") ; then
             if [ "$ANSWER" -le "${#VARIANT_CHOICES[@]}" ] ; then
-                export TARGET_BUILD_VARIANT=${VARIANT_CHOICES[$(($ANSWER-$_arrayoffset))]}
+                export TARGET_BUILD_VARIANT=${VARIANT_CHOICES[$(($ANSWER-1))]}
             fi
         else
             if check_variant $ANSWER
@@ -429,13 +429,9 @@
 }
 
 # add the default one here
-add_lunch_combo generic-eng
-
-# if we're on linux, add the simulator.  There is a special case
-# in lunch to deal with the simulator
-if [ "$(uname)" = "Linux" ] ; then
-    add_lunch_combo simulator
-fi
+add_lunch_combo full-eng
+add_lunch_combo full_x86-eng
+add_lunch_combo vbox_x86-eng
 
 function print_lunch_menu()
 {
@@ -464,7 +460,7 @@
         answer=$1
     else
         print_lunch_menu
-        echo -n "Which would you like? [generic-eng] "
+        echo -n "Which would you like? [full-eng] "
         read answer
     fi
 
@@ -472,7 +468,7 @@
 
     if [ -z "$answer" ]
     then
-        selection=generic-eng
+        selection=full-eng
     elif [ "$answer" = "simulator" ]
     then
         selection=simulator
@@ -480,7 +476,7 @@
     then
         if [ $answer -le ${#LUNCH_MENU_CHOICES[@]} ]
         then
-            selection=${LUNCH_MENU_CHOICES[$(($answer-$_arrayoffset))]}
+            selection=${LUNCH_MENU_CHOICES[$(($answer-1))]}
         fi
     elif (echo -n $answer | grep -q -e "^[^\-][^\-]*-[^\-][^\-]*$")
     then
@@ -560,7 +556,7 @@
         apps=all
     fi
 
-    export TARGET_PRODUCT=generic
+    export TARGET_PRODUCT=full
     export TARGET_BUILD_VARIANT=$variant
     export TARGET_SIMULATOR=false
     export TARGET_BUILD_TYPE=release
@@ -905,10 +901,10 @@
 {
     # process standard adb options
     local adbTarget=""
-    if [ $1 = "-d" -o $1 = "-e" ]; then
+    if [ "$1" = "-d" -o "$1" = "-e" ]; then
         adbTarget=$1
         shift 1
-    elif [ $1 = "-s" ]; then
+    elif [ "$1" = "-s" ]; then
         adbTarget="$1 $2"
         shift 2
     fi
@@ -1059,10 +1055,9 @@
                 echo "Invalid choice"
                 continue
             fi
-            pathname=${lines[$(($choice-$_arrayoffset))]}
+            pathname=${lines[$(($choice-1))]}
         done
     else
-        # even though zsh arrays are 1-based, $foo[0] is an alias for $foo[1]
         pathname=${lines[0]}
     fi
     cd $T/$pathname
@@ -1082,18 +1077,16 @@
     fi
 }
 
-# determine whether arrays are zero-based (bash) or one-based (zsh)
-_xarray=(a b c)
-if [ -z "${_xarray[${#_xarray[@]}]}" ]
-then
-    _arrayoffset=1
-else
-    _arrayoffset=0
-fi
-unset _xarray
+case `ps -o command -p $$` in
+    *bash*)
+        ;;
+    *)
+        echo "WARNING: Only bash is supported, use of other shell would lead to erroneous results"
+        ;;
+esac
 
 # Execute the contents of any vendorsetup.sh files we can find.
-for f in `/bin/ls vendor/*/vendorsetup.sh vendor/*/build/vendorsetup.sh device/*/*/vendorsetup.sh 2> /dev/null`
+for f in `/bin/ls vendor/*/vendorsetup.sh vendor/*/*/vendorsetup.sh device/*/*/vendorsetup.sh 2> /dev/null`
 do
     echo "including $f"
     . $f
diff --git a/libs/host/CopyFile.c b/libs/host/CopyFile.c
index a822b41..3cbe34a 100644
--- a/libs/host/CopyFile.c
+++ b/libs/host/CopyFile.c
@@ -63,6 +63,22 @@
 }
 
 /*
+ * Returns true if the source file has high resolution modification
+ * date.  Cygwin doesn't support st_mtim in normal build, so always
+ * return false.
+ */
+static bool isHiresMtime(const struct stat* pSrcStat)
+{
+#if defined(WIN32) || defined(USE_MINGW)
+    return 0;
+#elif defined(MACOSX_RSRC)
+    return pSrcStat->st_mtimespec.tv_nsec > 0;
+#else
+    return pSrcStat->st_mtim.tv_nsec > 0;
+#endif
+}
+
+/*
  * Returns true if the source and destination files are actually the
  * same thing.  We detect this by checking the inode numbers, which seems
  * to work on Cygwin.
@@ -151,6 +167,8 @@
          */
         ut.actime = pSrcStat->st_atime;
         ut.modtime = pSrcStat->st_mtime;
+        if (isHiresMtime(pSrcStat))
+            ut.modtime += 1;
         if (utime(dst, &ut) != 0) {
             DBUG(("---   unable to set timestamps on '%s': %s\n",
                 dst, strerror(errno)));
diff --git a/target/board/generic/BoardConfig.mk b/target/board/generic/BoardConfig.mk
index 9e52d25..26bf6ab 100644
--- a/target/board/generic/BoardConfig.mk
+++ b/target/board/generic/BoardConfig.mk
@@ -12,3 +12,6 @@
 
 # no hardware camera
 USE_CAMERA_STUB := true
+
+# Set /system/bin/sh to mksh, not ash, to test the transition.
+TARGET_SHELL := mksh
diff --git a/target/board/generic/device.mk b/target/board/generic/device.mk
new file mode 100644
index 0000000..0b4dc27
--- /dev/null
+++ b/target/board/generic/device.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for the product aspects that
+# are specific to the emulator.
+
+PRODUCT_PROPERTY_OVERRIDES := \
+    ro.ril.hsxpa=1 \
+    ro.ril.gprsclass=10
+
+PRODUCT_COPY_FILES := \
+    development/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
+    development/data/etc/vold.conf:system/etc/vold.conf
diff --git a/target/board/generic_x86/AndroidBoard.mk b/target/board/generic_x86/AndroidBoard.mk
index ff46149..8fb68f8 100644
--- a/target/board/generic_x86/AndroidBoard.mk
+++ b/target/board/generic_x86/AndroidBoard.mk
@@ -1,17 +1,3 @@
 LOCAL_PATH := $(call my-dir)
 
-include $(CLEAR_VARS)
-LOCAL_MODULE := init.rc
-LOCAL_SRC_FILES := init.rc
-LOCAL_MODULE_CLASS := SHARED_LIBRARIES
-LOCAL_MODULE_PATH := $(TARGET_ROOT_OUT)
-include $(BUILD_PREBUILT)
-
-ifeq ($(TARGET_PREBUILT_KERNEL),)
-LOCAL_KERNEL := prebuilt/android-x86/kernel/kernel
-else
-LOCAL_KERNEL := $(TARGET_PREBUILT_KERNEL)
-endif
-
-PRODUCT_COPY_FILES += \
-    $(LOCAL_KERNEL):kernel
+#
diff --git a/target/board/generic_x86/BoardConfig.mk b/target/board/generic_x86/BoardConfig.mk
index 608aee1..1bad20d 100644
--- a/target/board/generic_x86/BoardConfig.mk
+++ b/target/board/generic_x86/BoardConfig.mk
@@ -1,20 +1,23 @@
-TARGET_COMPRESS_MODULE_SYMBOLS := false
-TARGET_PRELINK_MODULE := false
-TARGET_NO_RECOVERY := true
-TARGET_HARDWARE_3D := false
-BOARD_USES_GENERIC_AUDIO := true
-USE_CAMERA_STUB := true
-TARGET_PROVIDES_INIT_RC := true
-USE_CUSTOM_RUNTIME_HEAP_MAX := "32M"
-TARGET_CPU_ABI := x86
-TARGET_USERIMAGES_USE_EXT2 := true
-TARGET_BOOTIMAGE_USE_EXT2 := true
+# config.mk
+#
+# Product-specific compile-time definitions.
+#
 
-# For VirtualBox and likely other emulators
-BOARD_INSTALLER_CMDLINE := init=/init console=ttyS0 console=tty0 androidboot.hardware=generic_x86 vga=788 verbose
-BOARD_KERNEL_CMDLINE := init=/init console=tty0 console=ttyS0 androidboot.hardware=generic_x86 vga=788
-TARGET_USE_DISKINSTALLER := true
-TARGET_DISK_LAYOUT_CONFIG := build/target/board/generic_x86/disk_layout.conf
-BOARD_BOOTIMAGE_MAX_SIZE := 8388608
-BOARD_SYSLOADER_MAX_SIZE := 7340032
-BOARD_FLASH_BLOCK_SIZE := 512
+# The generic product target doesn't have any hardware-specific pieces.
+TARGET_NO_BOOTLOADER := true
+TARGET_NO_KERNEL := true
+TARGET_CPU_ABI := x86
+TARGET_ARCH := x86
+TARGET_ARCH_VARIANT := x86-atom
+TARGET_PRELINK_MODULE := false
+
+# The IA emulator (qemu) uses the Goldfish devices
+HAVE_HTC_AUDIO_DRIVER := true
+BOARD_USES_GENERIC_AUDIO := true
+
+# no hardware camera
+USE_CAMERA_STUB := true
+
+# Set /system/bin/sh to mksh, not ash, to test the transition.
+TARGET_SHELL := mksh
+
diff --git a/target/board/generic_x86/README.txt b/target/board/generic_x86/README.txt
index 97e2d5b..938d982 100644
--- a/target/board/generic_x86/README.txt
+++ b/target/board/generic_x86/README.txt
@@ -1,33 +1,8 @@
-The generic_x86 board target provides basic services on very basic
-hardware (really for an emulation). To build with generic_x86, you will
-need an appropriate kernel for your emulation (or device).
+The "generic_x86" product defines a non-hardware-specific IA target
+without a kernel or bootloader.
 
-A1. Create a new top level directory and pull the AOSP repository
-        mkdir $HOME/AOSP
-        cd $HOME/AOSP
-        repo init -u git://android.git.kernel.org/platform/manifest.git
-        repo sync
+It can be used to build the entire user-level system, and
+will work with the IA version of the emulator,
 
-A2. Copy in the buildspeck.mk
-        cd $HOME/AOSP
-        cp build/target/board/generic_x86/buildspec-generic_x86.mk buildspec.mk
-
-A3. Copy in the kernel
-        cd $HOME/AOSP
-        cp ~/bzImage.your_device $HOME/AOSP/prebuilt/android-x86/kernel/kernel
-
-A4. Build
-        cd $HOME/AOSP
-        source build/envsetup.sh
-        lunch generic_x86-eng
-        make -j8
-
-The build will generate some image files whose format may or may not be correct for your
-device. You can build an installer image disk for the VirtualBox emulator using the command:
-
-A5. Build a VirtualBox installer image
-	cd $HOME/AOSP
-        source build/envsetup.sh
-        lunch generic_x86-eng
-        make -j8 installer_vdi
-
+It is not a product "base class"; no other products inherit
+from it or use it in any way.
diff --git a/target/board/generic_x86/buildspec-generic_x86.mk b/target/board/generic_x86/buildspec-generic_x86.mk
deleted file mode 100644
index fbc3947..0000000
--- a/target/board/generic_x86/buildspec-generic_x86.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-BUILD_ENV_SEQUENCE_NUMBER := 9
-DISABLE_DEXPREOPT := true
-TARGET_ARCH := x86
-
-# The eth0 device should be started with dhcp on boot.
-# Useful for emulators that don't provide a wifi connection.
-NET_ETH0_STARTONBOOT := true
diff --git a/target/board/generic_x86/device.mk b/target/board/generic_x86/device.mk
new file mode 100644
index 0000000..0b4dc27
--- /dev/null
+++ b/target/board/generic_x86/device.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for the product aspects that
+# are specific to the emulator.
+
+PRODUCT_PROPERTY_OVERRIDES := \
+    ro.ril.hsxpa=1 \
+    ro.ril.gprsclass=10
+
+PRODUCT_COPY_FILES := \
+    development/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
+    development/data/etc/vold.conf:system/etc/vold.conf
diff --git a/target/board/generic_x86/disk_layout.conf b/target/board/generic_x86/disk_layout.conf
deleted file mode 100644
index 7b073ee..0000000
--- a/target/board/generic_x86/disk_layout.conf
+++ /dev/null
@@ -1,54 +0,0 @@
-device {
-    path /dev/block/sda
-
-    scheme mbr
-
-    # bytes in a disk sector (== 1 LBA), must be a power of 2!
-    sector_size 512
-
-    # What LBA should the partitions start at?
-    start_lba 2048
-
-    # Autodetect disk size if == 0
-    num_lba 0
-
-    partitions {
-        sysloader {
-            active y
-            type linux
-            len 7M
-        }
-
-        recovery {
-            active y
-            type linux
-            len 16M
-        }
-
-        boot {
-            active y
-            type linux
-            len 8M
-        }
-
-        cache {
-            type linux
-            len 512M
-        }
-
-        system {
-            type linux
-            len 512M
-        }
-
-        third_party {
-            type linux
-            len 512M
-        }
-
-        data {
-            type linux
-            len -1
-        }
-    }
-}
diff --git a/target/board/generic_x86/init.rc b/target/board/generic_x86/init.rc
deleted file mode 100644
index 235083d..0000000
--- a/target/board/generic_x86/init.rc
+++ /dev/null
@@ -1,254 +0,0 @@
-
-on init
-
-sysclktz 0
-
-loglevel 3
-
-# setup the global environment
-    export PATH /sbin:/system/sbin:/system/bin:/system/xbin
-    export LD_LIBRARY_PATH /system/lib
-    export ANDROID_BOOTLOGO 1
-    export ANDROID_ROOT /system
-    export ANDROID_ASSETS /system/app
-    export ANDROID_DATA /data
-    export EXTERNAL_STORAGE /sdcard
-    export BOOTCLASSPATH /system/framework/core.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/android.policy.jar:/system/framework/services.jar
-
-# Backward compatibility
-    symlink /system/etc /etc
-
-# create mountpoints and mount tmpfs on sqlite_stmt_journals and debugfs on d
-    mkdir /d
-    mkdir /sdcard 0000 system system
-    mkdir /system
-    mkdir /data 0771 system system
-    mkdir /cache 0770 system cache
-    mkdir /sqlite_stmt_journals 01777 root root
-    mount tmpfs tmpfs /sqlite_stmt_journals
-    mount debugfs debugfs /d
-
-    mount rootfs rootfs / rw remount
-
-    write /proc/sys/kernel/panic_on_oops 1
-    write /proc/sys/kernel/hung_task_timeout_secs 0
-    write /proc/cpu/alignment 4
-    write /proc/sys/kernel/sched_latency_ns 10000000
-    write /proc/sys/kernel/sched_wakeup_granularity_ns 2000000
-
-# mount mtd partitions
-    # Hack...
-    #   We'll attempt to mount both as sdcard and harddisk...
-    #   Only one or the other will actually work... this way, we can
-    #   use the same init.rc for both
-    mount ext3 /dev/block/mmcblk0p6 /system
-    mount ext3 /dev/block/mmcblk0p6 /system rw remount
-    mount ext3 /dev/block/mmcblk0p2 /data nosuid nodev
-    mount ext3 /dev/block/mmcblk0p7 /cache nosuid nodev
-    mount ext3 /dev/block/sda6 /system
-    mount ext3 /dev/block/sda6 /system rw remount
-    mount ext3 /dev/block/sda8 /data
-
-    # We chown/chmod /data again so because mount is run as root + defaults
-    chown system system /data
-    chmod 0771 /data
-
-    # Same reason as /data above
-    chown system cache /cache
-    chmod 0770 /cache
-
-    # This may have been created by the recovery system with odd permissions
-    chown system system /cache/recovery
-    chmod 0770 /cache/recovery
-
-# create basic filesystem structure
-    mkdir /data/misc 01771 system misc
-    mkdir /data/misc/hcid 0770 bluetooth bluetooth
-    mkdir /data/local 0771 shell shell
-    mkdir /data/local/tmp 0771 shell shell
-    mkdir /data/data 0771 system system
-    mkdir /data/app-private 0771 system system
-    mkdir /data/app 0771 system system
-    mkdir /data/property 0700 root root
-
-    # create dalvik-cache and double-check the perms
-    mkdir /data/dalvik-cache 0771 system system
-    chown system system /data/dalvik-cache
-    chmod 0771 /data/dalvik-cache
-
-    # create the lost+found directories, so as to enforce our permissions
-    mkdir /system/lost+found 0770
-    mkdir /data/lost+found 0770
-    mkdir /cache/lost+found 0770
-
-    # double check the perms, in case lost+found already exists, and set owner
-    chown root root /data/lost+found
-    chmod 0770 /data/lost+found
-    chown root root /cache/lost+found
-    chmod 0770 /cache/lost+found
-
-on boot
-
-### Load some modules
-
-# basic network init
-    ifup lo
-    hostname localhost
-    domainname localdomain
-
-
-# set RLIMIT_NICE to allow priorities from 19 to -20
-    setrlimit 13 40 40
-    mkdir /data/core 0777
-    write /proc/sys/kernel/core_pattern /data/core/%e.%p
-    setrlimit 4 -1 -1
-
-# Define the oom_adj values for the classes of processes that can be
-# killed by the kernel.  These are used in ActivityManagerService.
-    setprop ro.FOREGROUND_APP_ADJ 0
-    setprop ro.VISIBLE_APP_ADJ 1
-    setprop ro.SECONDARY_SERVER_ADJ 2
-    setprop ro.HIDDEN_APP_MIN_ADJ 7
-    setprop ro.CONTENT_PROVIDER_ADJ 14
-    setprop ro.EMPTY_APP_ADJ 15
-    setprop ro.BACKUP_APP_ADJ 2
-    setprop ro.HOME_APP_ADJ 4
-
-
-# Define the memory thresholds at which the above process classes will
-# be killed.  These numbers are in pages (4k).
-    setprop ro.FOREGROUND_APP_MEM 1536
-    setprop ro.VISIBLE_APP_MEM 2048
-    setprop ro.SECONDARY_SERVER_MEM 4096
-    setprop ro.BACKUP_APP_MEM 4096
-    setprop ro.HOME_APP_MEM 4096
-    setprop ro.HIDDEN_APP_MEM 5120
-    setprop ro.CONTENT_PROVIDER_MEM 5632
-    setprop ro.EMPTY_APP_MEM 6144
-
-
-# Write value must be consistent with the above properties.
-    write /sys/module/lowmemorykiller/parameters/adj 0,1,2,7,14,15
-
-    write /proc/sys/vm/overcommit_memory 1
-    write /sys/module/lowmemorykiller/parameters/minfree 1536,2048,4096,8192,16384
-
-    # Set init its forked children's oom_adj.
-    write /proc/1/oom_adj -16
-
-    # Permissions for System Server and daemons.
-    chown radio system /sys/android_power/state
-    chown radio system /sys/android_power/request_state
-    chown radio system /sys/android_power/acquire_full_wake_lock
-    chown radio system /sys/android_power/acquire_partial_wake_lock
-    chown radio system /sys/android_power/release_wake_lock
-    chown radio system /sys/power/state
-    chown radio system /sys/power/wake_lock
-    chown radio system /sys/power/wake_unlock
-    chmod 0660 /sys/power/state
-    chmod 0660 /sys/power/wake_lock
-    chmod 0660 /sys/power/wake_unlock
-
-    chown system system /sys/class/timed_output/vibrator/enable
-    chown system system /sys/class/leds/keyboard-backlight/brightness
-    chown system system /sys/class/leds/lcd-backlight/brightness
-    chown system system /sys/class/leds/button-backlight/brightness
-    chown system system /sys/class/leds/red/brightness
-    chown system system /sys/class/leds/green/brightness
-    chown system system /sys/class/leds/blue/brightness
-    chown system system /sys/class/leds/red/device/grpfreq
-    chown system system /sys/class/leds/red/device/grppwm
-    chown system system /sys/class/leds/red/device/blink
-    chown system system /sys/class/leds/red/brightness
-    chown system system /sys/class/leds/green/brightness
-    chown system system /sys/class/leds/blue/brightness
-    chown system system /sys/class/leds/red/device/grpfreq
-    chown system system /sys/class/leds/red/device/grppwm
-    chown system system /sys/class/leds/red/device/blink
-    chown system system /sys/class/timed_output/vibrator/enable
-    chown bluetooth bluetooth /sys/module/board_trout/parameters/bluetooth_power_on
-    chown system system /sys/module/sco/parameters/disable_esco
-    chmod 0660 /sys/module/board_trout/parameters/bluetooth_power_on
-    chown radio audio /system/etc/AudioPara4.csv
-    chown system system /sys/kernel/ipv4/tcp_wmem_min
-    chown system system /sys/kernel/ipv4/tcp_wmem_def
-    chown system system /sys/kernel/ipv4/tcp_wmem_max
-    chown system system /sys/kernel/ipv4/tcp_rmem_min
-    chown system system /sys/kernel/ipv4/tcp_rmem_def
-    chown system system /sys/kernel/ipv4/tcp_rmem_max
-    chown root radio /proc/cmdline
-
-# Enable audio based on existing /dev/dsp
-    chmod 0666 /dev/snd/dsp
-
-# Define TCP buffer sizes for various networks
-#   ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax,
-    setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,110208
-    setprop net.tcp.buffersize.wifi    4095,87380,110208,4096,16384,110208
-    setprop net.tcp.buffersize.umts    4094,87380,110208,4096,16384,110208
-    setprop net.tcp.buffersize.edge    4093,26280,35040,4096,16384,35040
-    setprop net.tcp.buffersize.gprs    4092,8760,11680,4096,8760,11680
-
-    class_start default
-
-
-## Daemon processes to be run by init.
-##
-service console /system/bin/sh
-    console
-
-# adbd is controlled by the persist.service.adb.enable system property
-service adbd /sbin/adbd
-#    disabled
-
-# adbd on at boot in emulator
-on property:ro.kernel.qemu=1
-    start adbd
-
-# adbd on at boot in insecure builds
-on property:ro.secure=0
-    start adbd
-
-on property:persist.service.adb.enable=1
-    start adbd
-
-on property:persist.service.adb.enable=0
-    stop adbd
-
-service servicemanager /system/bin/servicemanager
-    user system
-    critical
-    onrestart restart zygote
-    onrestart restart media
-
-service vold /system/bin/vold
-    socket vold stream 0660 root mount
-
-service zygote /system/bin/app_process -Xzygote -Xint:fast /system/bin --zygote --start-system-server
-    socket zygote stream 666
-    onrestart write /sys/android_power/request_state wake
-
-service media /system/bin/mediaserver
-    user media
-    group system audio camera graphics inet net_bt net_bt_admin
-
-service dbus /system/bin/dbus-daemon --system --nofork
-    socket dbus stream 660 bluetooth bluetooth
-    user bluetooth
-    group bluetooth net_bt_admin
-
-service brick /system/bin/wipe nuke
-    disabled
-
-service installd /system/bin/installd
-    socket installd stream 600 system system
-
-#
-# Set by PRODUCT_PROPERTY_OVERRIDES in <product>.mk
-on property:net.eth0.startonboot=1
-    setprop ro.com.android.dataroaming true
-    start start_eth0
-
-service start_eth0 /system/bin/netcfg eth0 dhcp
-    oneshot
-    disabled
diff --git a/target/board/generic_x86/system.prop b/target/board/generic_x86/system.prop
new file mode 100644
index 0000000..137a0f9
--- /dev/null
+++ b/target/board/generic_x86/system.prop
@@ -0,0 +1,6 @@
+#
+# system.prop for generic sdk
+#
+
+rild.libpath=/system/lib/libreference-ril.so
+rild.libargs=-d /dev/ttyS0
diff --git a/target/board/vbox_x86/AndroidBoard.mk b/target/board/vbox_x86/AndroidBoard.mk
new file mode 100644
index 0000000..2af7dcd
--- /dev/null
+++ b/target/board/vbox_x86/AndroidBoard.mk
@@ -0,0 +1,7 @@
+LOCAL_PATH := $(call my-dir)
+
+LOCAL_KERNEL := prebuilt/android-x86/kernel/kernel-vbox
+
+PRODUCT_COPY_FILES += \
+    $(LOCAL_KERNEL):kernel \
+    $(LOCAL_PATH)/init.rc:root/init.rc
diff --git a/target/board/vbox_x86/BoardConfig.mk b/target/board/vbox_x86/BoardConfig.mk
new file mode 100644
index 0000000..525074e
--- /dev/null
+++ b/target/board/vbox_x86/BoardConfig.mk
@@ -0,0 +1,35 @@
+#
+# IA target for VitualBox
+#
+
+TARGET_ARCH=x86
+DISABLE_DEXPREOPT := true
+TARGET_COMPRESS_MODULE_SYMBOLS := false
+TARGET_PRELINK_MODULE := false
+TARGET_NO_RECOVERY := true
+TARGET_HARDWARE_3D := false
+BOARD_USES_GENERIC_AUDIO := true
+USE_CAMERA_STUB := true
+TARGET_PROVIDES_INIT_RC := true
+USE_CUSTOM_RUNTIME_HEAP_MAX := "32M"
+TARGET_CPU_ABI := x86
+TARGET_USERIMAGES_USE_EXT4 := true
+TARGET_BOOTIMAGE_USE_EXT2 := true
+
+# For VirtualBox and likely other emulators
+BOARD_INSTALLER_CMDLINE := init=/init console=ttyS0 console=tty0 vga=788 verbose
+BOARD_KERNEL_CMDLINE :=    init=/init console=ttyS0 console=tty0 vga=788 verbose androidboot.hardware=generic_x86 androidboot.console=ttyS0
+TARGET_USE_DISKINSTALLER := true
+
+TARGET_DISK_LAYOUT_CONFIG := build/target/board/vbox_x86/disk_layout.conf
+BOARD_BOOTIMAGE_MAX_SIZE := 8388608
+BOARD_SYSLOADER_MAX_SIZE := 7340032
+BOARD_FLASH_BLOCK_SIZE := 512
+BOARD_USERDATAIMAGE_PARTITION_SIZE := 50M
+BOARD_INSTALLERIMAGE_PARTITION_SIZE := 500M
+TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
+
+
+# The eth0 device should be started with dhcp on boot.
+# Useful for emulators that don't provide a wifi connection.
+NET_ETH0_STARTONBOOT := true
diff --git a/target/board/vbox_x86/README.txt b/target/board/vbox_x86/README.txt
new file mode 100644
index 0000000..568dc5f
--- /dev/null
+++ b/target/board/vbox_x86/README.txt
@@ -0,0 +1,9 @@
+The "vbox_x86" product defines a non-hardware-specific target intended
+to run on the VirtualBox emulator.
+
+Most of the Android devices (networking, phones, sound, etc) do not work.
+
+ADB via ethernet works with this target. You can use 'adb install' to
+test applications that do not require network, phone or sound support.
+This emulation is useful because VirtualBox runs much faster then does the
+QEMU emulators (at least until a KVM enabled QEMU emulator is available).
diff --git a/target/board/vbox_x86/device.mk b/target/board/vbox_x86/device.mk
new file mode 100644
index 0000000..0b4dc27
--- /dev/null
+++ b/target/board/vbox_x86/device.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for the product aspects that
+# are specific to the emulator.
+
+PRODUCT_PROPERTY_OVERRIDES := \
+    ro.ril.hsxpa=1 \
+    ro.ril.gprsclass=10
+
+PRODUCT_COPY_FILES := \
+    development/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
+    development/data/etc/vold.conf:system/etc/vold.conf
diff --git a/target/board/vbox_x86/disk_layout.conf b/target/board/vbox_x86/disk_layout.conf
new file mode 100644
index 0000000..12241ab
--- /dev/null
+++ b/target/board/vbox_x86/disk_layout.conf
@@ -0,0 +1,76 @@
+# Best to align all partion start/ends on a cylinder boundary (fdisk prefers it)
+# 512 bytes/sector
+# 63 sectors/track
+# 32 tracks/cylinder
+
+# LBAs are in 'k', so...
+# 1008 blocks (1k each) (1032192 bytes) / cylinder
+
+device {
+
+    path /dev/block/sda
+
+    scheme mbr
+
+    # bytes in a disk sector (== 1 LBA), must be a power of 2!
+    sector_size 512
+
+    # Start_lba should be on a cylindar boundary.
+    start_lba 63
+
+    # Autodetect disk size if == 0
+    num_lba 0
+
+    partitions {
+        # /dev/sdX1
+        sysloader {
+            active y
+            type linux
+            # 8 cyls in length... about 8M
+            len 8064
+        }
+
+        # /dev/sdX2
+        recovery {
+            active y
+            type linux
+            # 8 cyls in length... about 8M
+            len 8064
+        }
+
+        # /dev/sdX3
+        boot {
+            active y
+            type linux
+            # 8 cyls in length... about 8M
+            len 8064
+        }
+
+        # /dev/sdX4
+        # (extended partion begins)
+
+        # /dev/sdX5
+        cache {
+            type linux
+            len 512M
+        }
+
+        # /dev/sdX6
+        system {
+            type linux
+            len 512M
+        }
+
+        # /dev/sdX7
+        third_party {
+            type linux
+            len 512M
+        }
+
+        # /dev/sdX8
+        data {
+            type linux
+            len -1
+        }
+    }
+}
diff --git a/target/board/vbox_x86/init.rc b/target/board/vbox_x86/init.rc
new file mode 100644
index 0000000..100cc09
--- /dev/null
+++ b/target/board/vbox_x86/init.rc
@@ -0,0 +1,426 @@
+on early-init
+    start ueventd
+
+on init
+
+sysclktz 0
+
+loglevel 3
+
+# setup the global environment
+    export PATH /sbin:/vendor/bin:/system/sbin:/system/bin:/system/xbin
+    export LD_LIBRARY_PATH /vendor/lib:/system/lib
+    export ANDROID_BOOTLOGO 1
+    export ANDROID_ROOT /system
+    export ANDROID_ASSETS /system/app
+    export ANDROID_DATA /data
+    export EXTERNAL_STORAGE /mnt/sdcard
+    export ASEC_MOUNTPOINT /mnt/asec
+    export LOOP_MOUNTPOINT /mnt/obb
+    export BOOTCLASSPATH /system/framework/core.jar:/system/framework/bouncycastle.jar:/system/framework/ext.jar:/system/framework/framework.jar:/system/framework/android.policy.jar:/system/framework/services.jar:/system/framework/core-junit.jar
+
+# Backward compatibility
+    symlink /system/etc /etc
+    symlink /sys/kernel/debug /d
+
+# Right now vendor lives on the same filesystem as system,
+# but someday that may change.
+    symlink /system/vendor /vendor
+
+# create mountpoints
+    mkdir /mnt 0775 root system
+    mkdir /mnt/sdcard 0000 system system
+
+# Create cgroup mount point for cpu accounting
+    mkdir /acct
+    mount cgroup none /acct cpuacct
+    mkdir /acct/uid
+
+# Backwards Compat - XXX: Going away in G*
+    symlink /mnt/sdcard /sdcard
+
+    mkdir /system
+    mkdir /data 0771 system system
+    mkdir /cache 0770 system cache
+    mkdir /config 0500 root root
+
+    # Directory for putting things only root should see.
+    mkdir /mnt/secure 0700 root root
+
+    # Directory for staging bindmounts
+    mkdir /mnt/secure/staging 0700 root root
+
+    # Directory-target for where the secure container
+    # imagefile directory will be bind-mounted
+    mkdir /mnt/secure/asec  0700 root root
+
+    # Secure container public mount points.
+    mkdir /mnt/asec  0700 root system
+    mount tmpfs tmpfs /mnt/asec mode=0755,gid=1000
+
+    # Filesystem image public mount points.
+    mkdir /mnt/obb 0700 root system
+    mount tmpfs tmpfs /mnt/obb mode=0755,gid=1000
+
+    write /proc/sys/kernel/panic_on_oops 1
+    write /proc/sys/kernel/hung_task_timeout_secs 0
+    write /proc/cpu/alignment 4
+    write /proc/sys/kernel/sched_latency_ns 10000000
+    write /proc/sys/kernel/sched_wakeup_granularity_ns 2000000
+    write /proc/sys/kernel/sched_compat_yield 1
+    write /proc/sys/kernel/sched_child_runs_first 0
+
+# Create cgroup mount points for process groups
+    mkdir /dev/cpuctl
+    mount cgroup none /dev/cpuctl cpu
+    chown system system /dev/cpuctl
+    chown system system /dev/cpuctl/tasks
+    chmod 0777 /dev/cpuctl/tasks
+    write /dev/cpuctl/cpu.shares 1024
+
+    mkdir /dev/cpuctl/fg_boost
+    chown system system /dev/cpuctl/fg_boost/tasks
+    chmod 0777 /dev/cpuctl/fg_boost/tasks
+    write /dev/cpuctl/fg_boost/cpu.shares 1024
+
+    mkdir /dev/cpuctl/bg_non_interactive
+    chown system system /dev/cpuctl/bg_non_interactive/tasks
+    chmod 0777 /dev/cpuctl/bg_non_interactive/tasks
+    # 5.0 %
+    write /dev/cpuctl/bg_non_interactive/cpu.shares 52
+
+on fs
+# mount sda partitions
+    mount ext4 /dev/block/sda6 /system
+    mount ext4 /dev/block/sda6 /system ro remount
+    mount ext4 /dev/block/sda7 /data nosuid nodev
+    mount ext4 /dev/block/sda8 /cache nosuid nodev
+
+on post-fs
+    # once everything is setup, no need to modify /
+    mount rootfs rootfs / ro remount
+
+    # We chown/chmod /data again so because mount is run as root + defaults
+    chown system system /data
+    chmod 0771 /data
+
+    # Create dump dir and collect dumps.
+    # Do this before we mount cache so eventually we can use cache for
+    # storing dumps on platforms which do not have a dedicated dump partition.
+   
+    mkdir /data/dontpanic
+    chown root log /data/dontpanic
+    chmod 0750 /data/dontpanic
+
+    # Collect apanic data, free resources and re-arm trigger
+    copy /proc/apanic_console /data/dontpanic/apanic_console
+    chown root log /data/dontpanic/apanic_console
+    chmod 0640 /data/dontpanic/apanic_console
+
+    copy /proc/apanic_threads /data/dontpanic/apanic_threads
+    chown root log /data/dontpanic/apanic_threads
+    chmod 0640 /data/dontpanic/apanic_threads
+
+    write /proc/apanic_console 1
+
+    # Same reason as /data above
+    chown system cache /cache
+    chmod 0770 /cache
+
+    # This may have been created by the recovery system with odd permissions
+    chown system cache /cache/recovery
+    chmod 0770 /cache/recovery
+
+    #change permissions on vmallocinfo so we can grab it from bugreports
+    chown root log /proc/vmallocinfo
+    chmod 0440 /proc/vmallocinfo
+
+    #change permissions on kmsg & sysrq-trigger so bugreports can grab kthread stacks
+    chown root system /proc/kmsg
+    chmod 0440 /proc/kmsg
+    chown root system /proc/sysrq-trigger
+    chmod 0220 /proc/sysrq-trigger
+
+# create basic filesystem structure
+    mkdir /data/misc 01771 system misc
+    mkdir /data/misc/bluetoothd 0770 bluetooth bluetooth
+    mkdir /data/misc/bluetooth 0770 system system
+    mkdir /data/misc/keystore 0700 keystore keystore
+    mkdir /data/misc/vpn 0770 system system
+    mkdir /data/misc/systemkeys 0700 system system
+    mkdir /data/misc/vpn/profiles 0770 system system
+    # give system access to wpa_supplicant.conf for backup and restore
+    mkdir /data/misc/wifi 0770 wifi wifi
+    chmod 0770 /data/misc/wifi
+    chmod 0660 /data/misc/wifi/wpa_supplicant.conf
+    mkdir /data/local 0771 shell shell
+    mkdir /data/local/tmp 0771 shell shell
+    mkdir /data/data 0771 system system
+    mkdir /data/app-private 0771 system system
+    mkdir /data/app 0771 system system
+    mkdir /data/property 0700 root root
+
+    # create dalvik-cache and double-check the perms
+    mkdir /data/dalvik-cache 0771 system system
+    chown system system /data/dalvik-cache
+    chmod 0771 /data/dalvik-cache
+
+    # create the lost+found directories, so as to enforce our permissions
+    mkdir /data/lost+found 0770
+    mkdir /cache/lost+found 0770
+
+    # double check the perms, in case lost+found already exists, and set owner
+    chown root root /data/lost+found
+    chmod 0770 /data/lost+found
+    chown root root /cache/lost+found
+    chmod 0770 /cache/lost+found
+
+    # create data/drm directory
+    mkdir /data/drm 0774 drm drm
+    chown drm drm /data/drm
+    chmod 0774 /data/drm
+
+on boot
+# basic network init
+    ifup lo
+    hostname localhost
+    domainname localdomain
+
+# set RLIMIT_NICE to allow priorities from 19 to -20
+    setrlimit 13 40 40
+
+# Define the oom_adj values for the classes of processes that can be
+# killed by the kernel.  These are used in ActivityManagerService.
+    setprop ro.FOREGROUND_APP_ADJ 0
+    setprop ro.VISIBLE_APP_ADJ 1
+    setprop ro.PERCEPTIBLE_APP_ADJ 2
+    setprop ro.HEAVY_WEIGHT_APP_ADJ 3
+    setprop ro.SECONDARY_SERVER_ADJ 4
+    setprop ro.BACKUP_APP_ADJ 5
+    setprop ro.HOME_APP_ADJ 6
+    setprop ro.HIDDEN_APP_MIN_ADJ 7
+    setprop ro.EMPTY_APP_ADJ 15
+
+# Define the memory thresholds at which the above process classes will
+# be killed.  These numbers are in pages (4k).
+    setprop ro.FOREGROUND_APP_MEM 2048
+    setprop ro.VISIBLE_APP_MEM 3072
+    setprop ro.PERCEPTIBLE_APP_MEM 4096
+    setprop ro.HEAVY_WEIGHT_APP_MEM 4096
+    setprop ro.SECONDARY_SERVER_MEM 6144
+    setprop ro.BACKUP_APP_MEM 6144
+    setprop ro.HOME_APP_MEM 6144
+    setprop ro.HIDDEN_APP_MEM 7168
+    setprop ro.EMPTY_APP_MEM 8192
+
+# Write value must be consistent with the above properties.
+# Note that the driver only supports 6 slots, so we have combined some of
+# the classes into the same memory level; the associated processes of higher
+# classes will still be killed first.
+    write /sys/module/lowmemorykiller/parameters/adj 0,1,2,4,7,15
+
+    write /proc/sys/vm/overcommit_memory 1
+    write /proc/sys/vm/min_free_order_shift 4
+    write /sys/module/lowmemorykiller/parameters/minfree 2048,3072,4096,6144,7168,8192
+
+    # Set init its forked children's oom_adj.
+    write /proc/1/oom_adj -16
+
+    # Tweak background writeout
+    write /proc/sys/vm/dirty_expire_centisecs 200
+    write /proc/sys/vm/dirty_background_ratio  5
+
+    # Permissions for System Server and daemons.
+    chown radio system /sys/android_power/state
+    chown radio system /sys/android_power/request_state
+    chown radio system /sys/android_power/acquire_full_wake_lock
+    chown radio system /sys/android_power/acquire_partial_wake_lock
+    chown radio system /sys/android_power/release_wake_lock
+    chown radio system /sys/power/state
+    chown radio system /sys/power/wake_lock
+    chown radio system /sys/power/wake_unlock
+    chmod 0660 /sys/power/state
+    chmod 0660 /sys/power/wake_lock
+    chmod 0660 /sys/power/wake_unlock
+    chown system system /sys/class/timed_output/vibrator/enable
+    chown system system /sys/class/leds/keyboard-backlight/brightness
+    chown system system /sys/class/leds/lcd-backlight/brightness
+    chown system system /sys/class/leds/button-backlight/brightness
+    chown system system /sys/class/leds/jogball-backlight/brightness
+    chown system system /sys/class/leds/red/brightness
+    chown system system /sys/class/leds/green/brightness
+    chown system system /sys/class/leds/blue/brightness
+    chown system system /sys/class/leds/red/device/grpfreq
+    chown system system /sys/class/leds/red/device/grppwm
+    chown system system /sys/class/leds/red/device/blink
+    chown system system /sys/class/leds/red/brightness
+    chown system system /sys/class/leds/green/brightness
+    chown system system /sys/class/leds/blue/brightness
+    chown system system /sys/class/leds/red/device/grpfreq
+    chown system system /sys/class/leds/red/device/grppwm
+    chown system system /sys/class/leds/red/device/blink
+    chown system system /sys/class/timed_output/vibrator/enable
+    chown system system /sys/module/sco/parameters/disable_esco
+    chown system system /sys/kernel/ipv4/tcp_wmem_min
+    chown system system /sys/kernel/ipv4/tcp_wmem_def
+    chown system system /sys/kernel/ipv4/tcp_wmem_max
+    chown system system /sys/kernel/ipv4/tcp_rmem_min
+    chown system system /sys/kernel/ipv4/tcp_rmem_def
+    chown system system /sys/kernel/ipv4/tcp_rmem_max
+    chown root radio /proc/cmdline
+
+# Define TCP buffer sizes for various networks
+#   ReadMin, ReadInitial, ReadMax, WriteMin, WriteInitial, WriteMax,
+    setprop net.tcp.buffersize.default 4096,87380,110208,4096,16384,110208
+    setprop net.tcp.buffersize.wifi    4095,87380,110208,4096,16384,110208
+    setprop net.tcp.buffersize.umts    4094,87380,110208,4096,16384,110208
+    setprop net.tcp.buffersize.edge    4093,26280,35040,4096,16384,35040
+    setprop net.tcp.buffersize.gprs    4092,8760,11680,4096,8760,11680
+
+    class_start default
+
+## Daemon processes to be run by init.
+##
+service ueventd /sbin/ueventd
+    critical
+
+service console /system/bin/sh
+    console
+    disabled
+    user shell
+    group log
+
+on property:ro.secure=0
+    start console
+
+# adbd is controlled by the persist.service.adb.enable system property
+service adbd /sbin/adbd
+    disabled
+
+# adbd on at boot in emulator
+on property:ro.kernel.qemu=1
+    start adbd
+
+on property:persist.service.adb.enable=1
+    start adbd
+
+on property:persist.service.adb.enable=0
+    stop adbd
+
+service servicemanager /system/bin/servicemanager
+    user system
+    critical
+    onrestart restart zygote
+    onrestart restart media
+
+service vold /system/bin/vold
+    socket vold stream 0660 root mount
+    ioprio be 2
+
+service netd /system/bin/netd
+    socket netd stream 0660 root system
+    socket dnsproxyd stream 0660 root inet
+
+service debuggerd /system/bin/debuggerd
+
+service ril-daemon /system/bin/rild
+    socket rild stream 660 root radio
+    socket rild-debug stream 660 radio system
+    user root
+    group radio cache inet misc audio sdcard_rw
+
+service zygote /system/bin/app_process -Xzygote /system/bin --zygote --start-system-server
+    socket zygote stream 666
+    onrestart write /sys/android_power/request_state wake
+    onrestart write /sys/power/state on
+    onrestart restart media
+    onrestart restart netd
+
+service drm /system/bin/drmserver
+    user drm
+    group system root inet
+
+service drmio /system/bin/drmioserver
+    user drmio
+
+service media /system/bin/mediaserver
+    user media
+    group system audio camera graphics inet net_bt net_bt_admin net_raw
+    ioprio rt 4
+
+service bootanim /system/bin/bootanimation
+    user graphics
+    group graphics
+    disabled
+    oneshot
+
+service dbus /system/bin/dbus-daemon --system --nofork
+    socket dbus stream 660 bluetooth bluetooth
+    user bluetooth
+    group bluetooth net_bt_admin
+
+service bluetoothd /system/bin/bluetoothd -n
+    socket bluetooth stream 660 bluetooth bluetooth
+    socket dbus_bluetooth stream 660 bluetooth bluetooth
+    # init.rc does not yet support applying capabilities, so run as root and
+    # let bluetoothd drop uid to bluetooth with the right linux capabilities
+    group bluetooth net_bt_admin misc
+    disabled
+
+service hfag /system/bin/sdptool add --channel=10 HFAG
+    user bluetooth
+    group bluetooth net_bt_admin
+    disabled
+    oneshot
+
+service hsag /system/bin/sdptool add --channel=11 HSAG
+    user bluetooth
+    group bluetooth net_bt_admin
+    disabled
+    oneshot
+
+service opush /system/bin/sdptool add --channel=12 OPUSH
+    user bluetooth
+    group bluetooth net_bt_admin
+    disabled
+    oneshot
+
+service pbap /system/bin/sdptool add --channel=19 PBAP
+    user bluetooth
+    group bluetooth net_bt_admin
+    disabled
+    oneshot
+
+service installd /system/bin/installd
+    socket installd stream 600 system system
+
+service flash_recovery /system/etc/install-recovery.sh
+    oneshot
+
+service racoon /system/bin/racoon
+    socket racoon stream 600 system system
+    # racoon will setuid to vpn after getting necessary resources.
+    group net_admin
+    disabled
+    oneshot
+
+service mtpd /system/bin/mtpd
+    socket mtpd stream 600 system system
+    user vpn
+    group vpn net_admin net_raw
+    disabled
+    oneshot
+
+service keystore /system/bin/keystore /data/misc/keystore
+    user keystore
+    group keystore
+    socket keystore stream 666
+
+service dumpstate /system/bin/dumpstate -s
+    socket dumpstate stream 0660 shell log
+    disabled
+    oneshot
+
+# Enable networking so that adb can connect
+service netcfg /system/bin/netcfg eth0 dhcp
+    oneshot
diff --git a/target/board/vbox_x86/system.prop b/target/board/vbox_x86/system.prop
new file mode 100644
index 0000000..137a0f9
--- /dev/null
+++ b/target/board/vbox_x86/system.prop
@@ -0,0 +1,6 @@
+#
+# system.prop for generic sdk
+#
+
+rild.libpath=/system/lib/libreference-ril.so
+rild.libargs=-d /dev/ttyS0
diff --git a/target/product/AndroidProducts.mk b/target/product/AndroidProducts.mk
index 9a91da9..6096a89 100644
--- a/target/product/AndroidProducts.mk
+++ b/target/product/AndroidProducts.mk
@@ -25,17 +25,21 @@
 # it includes.
 #
 
-# An unbundled app build needs only generic.mk.
+# Unbundled apps will be built with the default product config.
 ifneq ($(TARGET_BUILD_APPS),)
 PRODUCT_MAKEFILES := \
     $(LOCAL_DIR)/core.mk \
-    $(LOCAL_DIR)/generic.mk
+    $(LOCAL_DIR)/generic.mk \
+    $(LOCAL_DIR)/full.mk
 else
 PRODUCT_MAKEFILES := \
     $(LOCAL_DIR)/core.mk \
     $(LOCAL_DIR)/generic.mk \
     $(LOCAL_DIR)/generic_x86.mk \
     $(LOCAL_DIR)/full.mk \
+    $(LOCAL_DIR)/full_x86.mk \
+    $(LOCAL_DIR)/vbox_x86.mk \
     $(LOCAL_DIR)/sdk.mk \
+    $(LOCAL_DIR)/sdk_x86.mk \
     $(LOCAL_DIR)/sim.mk
 endif
diff --git a/target/product/core.mk b/target/product/core.mk
index 0b906e0..55d6c26 100644
--- a/target/product/core.mk
+++ b/target/product/core.mk
@@ -41,6 +41,7 @@
     framework-res \
     hprof-conv \
     icu.dat \
+    ip-up-vpn \
     jasmin \
     jasmin.jar \
     libcrypto \
diff --git a/target/product/full.mk b/target/product/full.mk
index c204aad..c563bcc 100644
--- a/target/product/full.mk
+++ b/target/product/full.mk
@@ -16,44 +16,14 @@
 
 # This is a build configuration for a full-featured build of the
 # Open-Source part of the tree. It's geared toward a US-centric
-# build of the emulator, but all those aspects can be overridden
-# in inherited configurations.
+# build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
 
-PRODUCT_PACKAGES := \
-    OpenWnn \
-    PinyinIME \
-    VoiceDialer \
-    libWnnEngDic \
-    libWnnJpnDic \
-    libwnndict
-
-# Additional settings used in all AOSP builds
-PRODUCT_PROPERTY_OVERRIDES := \
-    keyguard.no_require_sim=true \
-    ro.com.android.dateformat=MM-dd-yyyy \
-    ro.com.android.dataroaming=true \
-    ro.ril.hsxpa=1 \
-    ro.ril.gprsclass=10
-
-PRODUCT_COPY_FILES := \
-    development/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
-    development/data/etc/vold.conf:system/etc/vold.conf
-
-# Pick up some sounds - stick with the short list to save space
-# on smaller devices.
-$(call inherit-product, frameworks/base/data/sounds/OriginalAudio.mk)
-
-# Get the TTS language packs
-$(call inherit-product-if-exists, external/svox/pico/lang/all_pico_languages.mk)
-
-# Get a list of languages. We use the small list to save space
-# on smaller devices.
-$(call inherit-product, build/target/product/languages_small.mk)
-
-$(call inherit-product, build/target/product/generic.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/board/generic/device.mk)
 
 # Overrides
 PRODUCT_NAME := full
-PRODUCT_BRAND := generic
 PRODUCT_DEVICE := generic
-PRODUCT_MODEL := Full Android
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := Full Android on Emulator
diff --git a/target/product/full_base.mk b/target/product/full_base.mk
new file mode 100644
index 0000000..8715e44
--- /dev/null
+++ b/target/product/full_base.mk
@@ -0,0 +1,50 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. This is a base configuration to
+# bes used for AOSP builds on various target devices.
+
+PRODUCT_PACKAGES := \
+    OpenWnn \
+    PinyinIME \
+    VoiceDialer \
+    libWnnEngDic \
+    libWnnJpnDic \
+    libwnndict \
+    WAPPushManager
+
+# Additional settings used in all AOSP builds
+PRODUCT_PROPERTY_OVERRIDES := \
+    keyguard.no_require_sim=true \
+    ro.com.android.dateformat=MM-dd-yyyy \
+    ro.com.android.dataroaming=true \
+    ro.config.ringtone=Ring_Synth_04.ogg \
+    ro.config.notification_sound=pixiedust.ogg
+
+# Put en_US first in the list, to make it default.
+PRODUCT_LOCALES := en_US
+
+# Get some sounds
+$(call inherit-product-if-exists, frameworks/base/data/sounds/AllAudio.mk)
+
+# Get the TTS language packs
+$(call inherit-product-if-exists, external/svox/pico/lang/all_pico_languages.mk)
+
+# Get the list of languages.
+$(call inherit-product, $(SRC_TARGET_DIR)/product/locales_full.mk)
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/generic.mk)
diff --git a/target/product/full_x86.mk b/target/product/full_x86.mk
new file mode 100644
index 0000000..f23e988
--- /dev/null
+++ b/target/product/full_x86.mk
@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/full_base.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/board/generic/device.mk)
+
+# Ensure we package the BIOS files too.
+PRODUCT_PACKAGES += \
+	bios.bin \
+	vgabios-cirrus.bin \
+
+# Overrides
+PRODUCT_NAME := full_x86
+PRODUCT_DEVICE := generic_x86
+PRODUCT_BRAND := Android
+PRODUCT_MODEL := Full Android on x86 Emulator
diff --git a/target/product/generic_x86.mk b/target/product/generic_x86.mk
index 9713900..7e77a27 100644
--- a/target/product/generic_x86.mk
+++ b/target/product/generic_x86.mk
@@ -1,34 +1,26 @@
+#
+# Copyright (C) 2007 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
 # This is a generic product that isn't specialized for a specific device.
-# It includes the base Android platform. If you need Google-specific features,
-# you should derive from generic_with_google.mk
+# It includes the base Android platform.
 
-PRODUCT_PACKAGES := \
-    AlarmClock \
-    AlarmProvider \
-    Calendar \
-    Camera \
-    DrmProvider \
-    LatinIME \
-    Mms \
-    Music \
-    Settings \
-    Sync \
-    Updater \
-    CalendarProvider \
-    SubscribedFeedsProvider \
-    SyncProvider
-
+$(call inherit-product, $(SRC_TARGET_DIR)/product/generic.mk)
 $(call inherit-product, $(SRC_TARGET_DIR)/product/core.mk)
 
 # Overrides
 PRODUCT_BRAND := generic_x86
 PRODUCT_DEVICE := generic_x86
 PRODUCT_NAME := generic_x86
-PRODUCT_POLICY := android.policy_phone
-
-# If running on an emulator or some other device that has a LAN connection
-# that isn't a wifi connection. This will instruct init.rc to enable the
-# network connection so that you can use it with ADB
-ifdef NET_ETH0_STARTONBOOT
-  PRODUCT_PROPERTY_OVERRIDES += net.eth0.startonboot=1
-endif
diff --git a/target/product/locales_full.mk b/target/product/locales_full.mk
new file mode 100644
index 0000000..cf10392
--- /dev/null
+++ b/target/product/locales_full.mk
@@ -0,0 +1,5 @@
+# The locales from the ICU "-large.dat" data set.
+# See external/icu4c/stubdata.
+# This is distinct from "languages_full.mk", which contains those locales for
+# which we have translations. If you like, this file is i18n rather than l18n.
+PRODUCT_LOCALES := cs_CZ da_DK de_AT de_CH de_DE de_LI el_GR en_AU en_CA en_GB en_NZ en_SG en_US es_ES fr_CA fr_CH fr_BE fr_FR it_CH it_IT ja_JP ko_KR nb_NO nl_BE nl_NL pl_PL pt_PT ru_RU sv_SE tr_TR zh_CN zh_HK zh_TW
diff --git a/target/product/sdk.mk b/target/product/sdk.mk
index d73e702..e6b8bd0 100644
--- a/target/product/sdk.mk
+++ b/target/product/sdk.mk
@@ -49,7 +49,12 @@
 	GestureBuilder \
 	SoftKeyboard \
 	CubeLiveWallpapers \
-	QuickSearchBox
+	QuickSearchBox \
+	monkeyrunner \
+	guavalib \
+	jsr305lib \
+	jython \
+	jsilver
 
 # Host tools that are parts of the SDK.
 # See development/build/sdk.atree
@@ -60,13 +65,16 @@
 	hprof-conv \
 	mksdcard \
 	emulator \
+	bios.bin \
+	vgabios-cirrus.bin \
 	ddms \
 	hierarchyviewer \
 	draw9patch \
 	layoutopt \
 	traceview \
 	android \
-	dexdump
+	dexdump \
+	monkeyrunner
 
 # Native host Java libraries that are parts of the SDK.
 # See development/build/sdk.atree
@@ -86,6 +94,7 @@
 	sdklib \
 	sdkuilib \
 	sdkmanager \
+	swtmenubar \
 	swing-worker-1.1 \
 	groovy-all-1.7.0 \
 	commons-compress-1.0 \
@@ -99,7 +108,17 @@
 	org.eclipse.equinox.common_3.4.0.v20080421-2006 \
 	org.eclipse.jface_3.4.2.M20090107-0800 \
 	osgi \
-	layoutlib
+	layoutlib \
+	monkeyrunner \
+	guavalib \
+	jsr305lib \
+	jython \
+	ddmlib-tests \
+	ninepatch-tests \
+	common-tests \
+	sdklib-tests \
+	sdkuilib-tests
+
 
 PRODUCT_PACKAGE_OVERLAYS := development/sdk_overlay
 
diff --git a/target/product/sdk_x86.mk b/target/product/sdk_x86.mk
new file mode 100644
index 0000000..6c5e746
--- /dev/null
+++ b/target/product/sdk_x86.mk
@@ -0,0 +1,28 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk.mk)
+
+# Overrides
+PRODUCT_BRAND := generic_x86
+PRODUCT_NAME := sdk_x86
+PRODUCT_DEVICE := generic_x86
+PRODUCT_MODEL := Android SDK built for x86
diff --git a/target/product/sim.mk b/target/product/sim.mk
index 51b3676..09722d6 100644
--- a/target/product/sim.mk
+++ b/target/product/sim.mk
@@ -1,6 +1,6 @@
 $(call inherit-product, $(SRC_TARGET_DIR)/product/generic.mk)
+$(call inherit-product, $(SRC_TARGET_DIR)/product/locales_full.mk)
 
 # Overrides
 PRODUCT_NAME := sim
 PRODUCT_DEVICE := sim
-PRODUCT_LOCALES := en_US
diff --git a/target/product/vbox_x86.mk b/target/product/vbox_x86.mk
new file mode 100644
index 0000000..c32b1eb
--- /dev/null
+++ b/target/product/vbox_x86.mk
@@ -0,0 +1,26 @@
+#
+# Copyright (C) 2009 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# This is a build configuration for a full-featured build of the
+# Open-Source part of the tree. It's geared toward a US-centric
+# build quite specifically for the emulator, and might not be
+# entirely appropriate to inherit from for on-device configurations.
+
+$(call inherit-product, $(SRC_TARGET_DIR)/product/full_x86.mk)
+
+PRODUCT_NAME := vbox_x86
+PRODUCT_DEVICE := vbox_x86
+PRODUCT_MODEL := Full Android on x86 VirtualBox
diff --git a/tools/Android.mk b/tools/Android.mk
index fa9d0b7..92603f5 100644
--- a/tools/Android.mk
+++ b/tools/Android.mk
@@ -14,7 +14,7 @@
 # limitations under the License.
 #
 
-LOCAL_PATH := $(my-dir)
+LOCAL_PATH := $(call my-dir)
 
 # If we're building only unbundled apps, this is the only tool we need.
 ifneq ($(TARGET_BUILD_APPS),)
diff --git a/tools/mktarball.sh b/tools/mktarball.sh
index ea1a8ed..3e32006 100755
--- a/tools/mktarball.sh
+++ b/tools/mktarball.sh
@@ -39,7 +39,14 @@
 done
 
 if [ $? -eq 0 ] ; then
-    bzip2 -c ${target_tar} > ${target_tarball}
+    case "${target_tarball}" in
+    *.bz2 )
+        bzip2 -c ${target_tar} > ${target_tarball}
+        ;;
+    *.gz )
+        gzip -c ${target_tar} > ${target_tarball}
+        ;;
+    esac
     success=$?
     [ $success -eq 0 ] || rm -f ${target_tarball}
     rm -f ${target_tar}
diff --git a/tools/releasetools/img_from_target_files b/tools/releasetools/img_from_target_files
index 78fd141..4a23ab4 100755
--- a/tools/releasetools/img_from_target_files
+++ b/tools/releasetools/img_from_target_files
@@ -61,10 +61,13 @@
   img = tempfile.NamedTemporaryFile()
 
   build_command = []
-  if OPTIONS.info_dict["fstab"]["/data"].fs_type.startswith("ext"):
-    build_command = ["mkuserimg.sh",
-                     user_dir, img.name,
-                     OPTIONS.info_dict["fstab"]["/data"].fs_type, "data"]
+  fstab = OPTIONS.info_dict["fstab"]
+  if fstab and fstab["/data"].fs_type.startswith("ext"):
+    build_command = ["mkuserimg.sh"]
+    if "extfs_sparse_flag" in OPTIONS.info_dict:
+      build_command.append(OPTIONS.info_dict["extfs_sparse_flag"])
+    build_command.extend([user_dir, img.name,
+                     fstab["/data"].fs_type, "data"])
     if "userdata_size" in OPTIONS.info_dict:
       build_command.append(str(OPTIONS.info_dict["userdata_size"]))
   else:
@@ -109,10 +112,14 @@
       pass
 
   build_command = []
-  if OPTIONS.info_dict["fstab"]["/system"].fs_type.startswith("ext"):
-    build_command = ["mkuserimg.sh",
-                     os.path.join(OPTIONS.input_tmp, "system"), img.name,
-                     OPTIONS.info_dict["fstab"]["/system"].fs_type, "system"]
+  fstab = OPTIONS.info_dict["fstab"]
+  if fstab and fstab["/system"].fs_type.startswith("ext"):
+
+    build_command = ["mkuserimg.sh"]
+    if "extfs_sparse_flag" in OPTIONS.info_dict:
+      build_command.append(OPTIONS.info_dict["extfs_sparse_flag"])
+    build_command.extend([os.path.join(OPTIONS.input_tmp, "system"), img.name,
+                     fstab["/system"].fs_type, "system"])
     if "system_size" in OPTIONS.info_dict:
       build_command.append(str(OPTIONS.info_dict["system_size"]))
   else: