Merge "Move apicheck.mk off SRC_API_DIR."
diff --git a/core/Makefile b/core/Makefile
index 9481e26..002e955 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -12,9 +12,11 @@
# The filter part means "only eval the copy-one-file rule if this
# src:dest pair is the first one to match the same dest"
#$(1): the src:dest pair
+#$(2): the dest
define check-product-copy-files
-$(if $(filter %.apk, $(call word-colon, 2, $(1))),$(error \
- Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!))
+$(if $(filter-out $(TARGET_COPY_OUT_SYSTEM_OTHER)/%,$(2)), \
+ $(if $(filter %.apk, $(2)),$(error \
+ Prebuilt apk found in PRODUCT_COPY_FILES: $(1), use BUILD_PREBUILT instead!)))
endef
# filter out the duplicate <source file>:<dest file> pairs.
unique_product_copy_files_pairs :=
@@ -26,7 +28,7 @@
$(foreach cf,$(unique_product_copy_files_pairs), \
$(eval _src := $(call word-colon,1,$(cf))) \
$(eval _dest := $(call word-colon,2,$(cf))) \
- $(call check-product-copy-files,$(cf)) \
+ $(call check-product-copy-files,$(cf),$(_dest)) \
$(if $(filter $(unique_product_copy_files_destinations),$(_dest)), \
$(eval product_copy_files_ignored += $(cf)), \
$(eval _fulldest := $(call append-path,$(PRODUCT_OUT),$(_dest))) \
@@ -1086,6 +1088,7 @@
$(if $(BOARD_SYSTEMIMAGE_PARTITION_SIZE),$(hide) echo "system_size=$(BOARD_SYSTEMIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "system_fs_type=$(BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "system_extfs_inode_count=$(BOARD_SYSTEMIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+$(if $(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "system_extfs_rsv_pct=$(BOARD_SYSTEMIMAGE_EXTFS_RSV_PCT)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_JOURNAL_SIZE),$(hide) echo "system_journal_size=$(BOARD_SYSTEMIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(BOARD_EXT4_SHARE_DUP_BLOCKS),$(hide) echo "ext4_share_dup_blocks=$(BOARD_EXT4_SHARE_DUP_BLOCKS)" >> $(1))
$(if $(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "system_squashfs_compressor=$(BOARD_SYSTEMIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
@@ -1102,6 +1105,7 @@
$(if $(BOARD_CACHEIMAGE_PARTITION_SIZE),$(hide) echo "cache_size=$(BOARD_CACHEIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "vendor_fs_type=$(BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT),$(hide) echo "vendor_extfs_inode_count=$(BOARD_VENDORIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+$(if $(BOARD_VENDORIMAGE_EXTFS_RSV_PCT),$(hide) echo "vendor_extfs_rsv_pct=$(BOARD_VENDORIMAGE_EXTFS_RSV_PCT)" >> $(1))
$(if $(BOARD_VENDORIMAGE_PARTITION_SIZE),$(hide) echo "vendor_size=$(BOARD_VENDORIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_JOURNAL_SIZE),$(hide) echo "vendor_journal_size=$(BOARD_VENDORIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "vendor_squashfs_compressor=$(BOARD_VENDORIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
@@ -1111,6 +1115,7 @@
$(if $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH),$(hide) echo "vendor_base_fs_file=$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_VENDOR_BASE_FS_PATH)" >> $(1))
$(if $(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE),$(hide) echo "product_fs_type=$(BOARD_PRODUCTIMAGE_FILE_SYSTEM_TYPE)" >> $(1))
$(if $(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT),$(hide) echo "product_extfs_inode_count=$(BOARD_PRODUCTIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+$(if $(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT),$(hide) echo "product_extfs_rsv_pct=$(BOARD_PRODUCTIMAGE_EXTFS_RSV_PCT)" >> $(1))
$(if $(BOARD_PRODUCTIMAGE_PARTITION_SIZE),$(hide) echo "product_size=$(BOARD_PRODUCTIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_PRODUCTIMAGE_JOURNAL_SIZE),$(hide) echo "product_journal_size=$(BOARD_PRODUCTIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR),$(hide) echo "product_squashfs_compressor=$(BOARD_PRODUCTIMAGE_SQUASHFS_COMPRESSOR)" >> $(1))
@@ -1121,6 +1126,7 @@
$(if $(BOARD_OEMIMAGE_PARTITION_SIZE),$(hide) echo "oem_size=$(BOARD_OEMIMAGE_PARTITION_SIZE)" >> $(1))
$(if $(BOARD_OEMIMAGE_JOURNAL_SIZE),$(hide) echo "oem_journal_size=$(BOARD_OEMIMAGE_JOURNAL_SIZE)" >> $(1))
$(if $(BOARD_OEMIMAGE_EXTFS_INODE_COUNT),$(hide) echo "oem_extfs_inode_count=$(BOARD_OEMIMAGE_EXTFS_INODE_COUNT)" >> $(1))
+$(if $(BOARD_OEMIMAGE_EXTFS_RSV_PCT),$(hide) echo "oem_extfs_rsv_pct=$(BOARD_OEMIMAGE_EXTFS_RSV_PCT)" >> $(1))
$(if $(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG),$(hide) echo "extfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_EXT_FLAG)" >> $(1))
$(if $(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG),$(hide) echo "squashfs_sparse_flag=$(INTERNAL_USERIMAGES_SPARSE_SQUASHFS_FLAG)" >> $(1))
$(hide) echo "selinux_fc=$(SELINUX_FC)" >> $(1)
@@ -1488,6 +1494,25 @@
endif
# -----------------------------------------------------------------
+# Final System VINTF manifest including fragments. This is not assembled
+# on the device because it depends on everything in a given device
+# image which defines a vintf_fragment.
+
+BUILT_ASSEMBLED_SYSTEM_MANIFEST := $(PRODUCT_OUT)/verified_assembled_system_manifest.xml
+$(BUILT_ASSEMBLED_SYSTEM_MANIFEST): $(HOST_OUT_EXECUTABLES)/assemble_vintf
+$(BUILT_ASSEMBLED_SYSTEM_MANIFEST): $(BUILT_VENDOR_MATRIX)
+$(BUILT_ASSEMBLED_SYSTEM_MANIFEST): $(BUILT_SYSTEM_MANIFEST)
+$(BUILT_ASSEMBLED_SYSTEM_MANIFEST): $(FULL_SYSTEMIMAGE_DEPS)
+ @echo "Verifying system VINTF manifest."
+ PRODUCT_ENFORCE_VINTF_MANIFEST=$(PRODUCT_ENFORCE_VINTF_MANIFEST) \
+ $(HOST_OUT_EXECUTABLES)/assemble_vintf \
+ -c $(BUILT_VENDOR_MATRIX) \
+ -i $(BUILT_SYSTEM_MANIFEST) \
+ $$([ -d $(TARGET_OUT)/etc/vintf/manifest ] && \
+ find $(TARGET_OUT)/etc/vintf/manifest -type f -name "*.xml" | \
+ sed "s/^/-i /" | tr '\n' ' ') -o $@
+
+# -----------------------------------------------------------------
# installed file list
# Depending on anything that $(BUILT_SYSTEMIMAGE) depends on.
# We put installed-files.txt ahead of image itself in the dependency graph
@@ -1563,6 +1588,7 @@
exit 1 )
endef
+$(BUILT_SYSTEMIMAGE): $(BUILT_ASSEMBLED_SYSTEM_MANIFEST)
$(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) $(BUILD_IMAGE_SRCS)
$(call build-systemimage-target,$@)
@@ -1977,6 +2003,32 @@
$(ALL_PDK_FUSION_FILES)) \
$(PDK_FUSION_SYMLINK_STAMP)
+# Final Vendor VINTF manifest including fragments. This is not assembled
+# on the device because it depends on everything in a given device
+# image which defines a vintf_fragment.
+ifdef BUILT_VENDOR_MANIFEST
+BUILT_ASSEMBLED_VENDOR_MANIFEST := $(PRODUCT_OUT)/verified_assembled_vendor_manifest.xml
+ifeq (true,$(strip $(PRODUCT_ENFORCE_VINTF_MANIFEST)))
+ifdef DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE
+# TODO(b/65028233): turn this on globally
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): PRIVATE_SYSTEM_ASSEMBLE_VINTF_ENV_VARS := VINTF_ENFORCE_NO_UNUSED_HALS=true
+endif # DEVICE_FRAMEWORK_COMPATIBILITY_MATRIX_FILE
+endif # PRODUCT_ENFORCE_VINTF_MANIFEST
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): $(HOST_OUT_EXECUTABLES)/assemble_vintf
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): $(BUILT_SYSTEM_MATRIX)
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): $(BUILT_VENDOR_MANIFEST)
+$(BUILT_ASSEMBLED_VENDOR_MANIFEST): $(INTERNAL_VENDORIMAGE_FILES)
+ @echo "Verifying vendor VINTF manifest."
+ PRODUCT_ENFORCE_VINTF_MANIFEST=$(PRODUCT_ENFORCE_VINTF_MANIFEST) \
+ $(PRIVATE_SYSTEM_ASSEMBLE_VINTF_ENV_VARS) \
+ $(HOST_OUT_EXECUTABLES)/assemble_vintf \
+ -c $(BUILT_SYSTEM_MATRIX) \
+ -i $(BUILT_VENDOR_MANIFEST) \
+ $$([ -d $(TARGET_OUT_VENDOR)/etc/vintf/manifest ] && \
+ find $(TARGET_OUT_VENDOR)/etc/vintf/manifest -type f -name "*.xml" | \
+ sed "s/^/-i /" | tr '\n' ' ') -o $@
+endif # BUILT_VENDOR_MANIFEST
+
# platform.zip depends on $(INTERNAL_VENDORIMAGE_FILES).
$(INSTALLED_PLATFORM_ZIP) : $(INTERNAL_VENDORIMAGE_FILES)
@@ -2006,6 +2058,9 @@
# We just build this directly to the install location.
INSTALLED_VENDORIMAGE_TARGET := $(BUILT_VENDORIMAGE_TARGET)
+ifdef BUILT_VENDOR_MANIFEST
+$(INSTALLED_VENDORIMAGE_TARGET): $(BUILT_ASSEMBLED_VENDOR_MANIFEST)
+endif
$(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES) $(INSTALLED_FILES_FILE_VENDOR) $(BUILD_IMAGE_SRCS) $(DEPMOD) $(BOARD_VENDOR_KERNEL_MODULES)
$(build-vendorimage-target)
@@ -2397,15 +2452,17 @@
OTATOOLS_DEPS := \
system/extras/ext4_utils/mke2fs.conf \
+ external/avb/test/data/atx_metadata.bin \
+ external/avb/test/data/testkey_atx_psk.pem \
external/avb/test/data/testkey_rsa4096.pem \
- $(sort $(shell find system/update_engine/scripts -name \*.pyc -prune -o -type f -print)) \
- $(sort $(shell find build/target/product/security -type f -name \*.x509.pem -o -name \*.pk8 -o \
+ $(sort $(shell find system/update_engine/scripts -name "*.pyc" -prune -o -type f -print)) \
+ $(sort $(shell find build/target/product/security -type f -name "*.x509.pem" -o -name "*.pk8" -o \
-name verity_key)) \
- $(sort $(shell find device $(wildcard vendor) -type f -name \*.pk8 -o -name verifiedboot\* -o \
- -name \*.x509.pem -o -name oem\*.prop))
+ $(sort $(shell find device $(wildcard vendor) -type f -name "*.pk8" -o -name "verifiedboot*" -o \
+ -name "*.x509.pem" -o -name "oem*.prop"))
OTATOOLS_RELEASETOOLS := \
- $(sort $(shell find build/make/tools/releasetools -name \*.pyc -prune -o -type f))
+ $(sort $(shell find build/make/tools/releasetools -name "*.pyc" -prune -o -type f))
ifeq (true,$(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_SUPPORTS_VBOOT))
OTATOOLS_DEPS += \
@@ -2534,8 +2591,9 @@
$(HOST_OUT_EXECUTABLES)/imgdiff \
$(HOST_OUT_EXECUTABLES)/bsdiff \
$(BUILD_IMAGE_SRCS) \
- $(HOST_OUT_EXECUTABLES)/assemble_vintf \
- $(BUILT_VENDOR_MANIFEST) \
+ $(BUILT_ASSEMBLED_SYSTEM_MANIFEST) \
+ $(BUILT_ASSEMBLED_VENDOR_MANIFEST) \
+ $(BUILT_SYSTEM_MATRIX) \
$(BUILT_VENDOR_MATRIX) \
| $(ACP)
@echo "Package target files: $@"
@@ -2811,16 +2869,10 @@
$(hide) $(call fs_config,$(zip_root)/SYSTEM_OTHER,system/) > $(zip_root)/META/system_other_filesystem_config.txt
endif
@# Metadata for compatibility verification.
- $(hide) cp $(BUILT_SYSTEM_COMPATIBILITY_MATRIX) $(zip_root)/META/system_matrix.xml
- $(hide) $(HOST_OUT_EXECUTABLES)/assemble_vintf \
- -i $(BUILT_SYSTEM_MANIFEST) $$(find $(zip_root)/SYSTEM/etc/vintf/manifest -type f -name "*.xml" | \
- sed "s/^/-i /" | tr '\n' ' ') \
- -o $(zip_root)/META/system_manifest.xml
-ifdef BUILT_VENDOR_MANIFEST
- $(hide) $(HOST_OUT_EXECUTABLES)/assemble_vintf \
- -i $(BUILT_VENDOR_MANIFEST) $$(find $(zip_root)/VENDOR/etc/vintf/manifest -type f -name "*.xml" | \
- sed "s/^/-i /" | tr '\n' ' ') \
- -o $(zip_root)/META/vendor_manifest.xml
+ $(hide) cp $(BUILT_SYSTEM_MATRIX) $(zip_root)/META/system_matrix.xml
+ $(hide) cp $(BUILT_ASSEMBLED_SYSTEM_MANIFEST) $(zip_root)/META/system_manifest.xml
+ifdef BUILT_ASSEMBLED_VENDOR_MANIFEST
+ $(hide) cp $(BUILT_ASSEMBLED_VENDOR_MANIFEST) $(zip_root)/META/vendor_manifest.xml
endif
ifdef BUILT_VENDOR_MATRIX
$(hide) cp $(BUILT_VENDOR_MATRIX) $(zip_root)/META/vendor_matrix.xml
diff --git a/core/aapt2.mk b/core/aapt2.mk
index 109bb39..4385b4d 100644
--- a/core/aapt2.mk
+++ b/core/aapt2.mk
@@ -66,6 +66,8 @@
my_static_library_resources := $(foreach l, $(call reverse-list,$(LOCAL_STATIC_ANDROID_LIBRARIES)),\
$(call intermediates-dir-for,JAVA_LIBRARIES,$(l),,COMMON)/package-res.apk)
+my_static_library_extra_packages := $(foreach l, $(call reverse-list,$(LOCAL_STATIC_ANDROID_LIBRARIES)),\
+ $(call intermediates-dir-for,JAVA_LIBRARIES,$(l),,COMMON)/extra_packages)
my_shared_library_resources := $(foreach l, $(LOCAL_SHARED_ANDROID_LIBRARIES),\
$(call intermediates-dir-for,JAVA_LIBRARIES,$(l),,COMMON)/package-res.apk)
@@ -81,6 +83,8 @@
my_srcjar := $(intermediates.COMMON)/aapt2.srcjar
LOCAL_SRCJARS += $(my_srcjar)
+aapt_extra_packages := $(intermediates.COMMON)/extra_packages
+
$(my_res_package): PRIVATE_RES_FLAT := $(my_res_resources_flat)
$(my_res_package): PRIVATE_OVERLAY_FLAT := $(my_static_library_resources) $(my_resources_flata) $(my_overlay_resources_flat)
$(my_res_package): PRIVATE_SHARED_ANDROID_LIBRARIES := $(my_shared_library_resources)
@@ -88,7 +92,9 @@
$(my_res_package): PRIVATE_ASSET_DIRS := $(my_asset_dirs)
$(my_res_package): PRIVATE_JAVA_GEN_DIR := $(intermediates.COMMON)/aapt2
$(my_res_package): PRIVATE_SRCJAR := $(my_srcjar)
-$(my_res_package): .KATI_IMPLICIT_OUTPUTS := $(my_srcjar)
+$(my_res_package): PRIVATE_STATIC_LIBRARY_EXTRA_PACKAGES := $(my_static_library_extra_packages)
+$(my_res_package): PRIVATE_AAPT_EXTRA_PACKAGES := $(aapt_extra_packages)
+$(my_res_package): .KATI_IMPLICIT_OUTPUTS := $(my_srcjar) $(aapt_extra_packages)
ifdef R_file_stamp
$(my_res_package): PRIVATE_R_FILE_STAMP := $(R_file_stamp)
@@ -112,8 +118,8 @@
$(my_res_package): $(full_android_manifest) $(my_static_library_resources) $(my_shared_library_resources)
$(my_res_package): $(my_full_asset_paths)
$(my_res_package): $(my_res_resources_flat) $(my_overlay_resources_flat) \
- $(my_resources_flata) $(my_static_library_resources) \
- $(AAPT2) $(SOONG_ZIP)
+ $(my_resources_flata) $(my_static_library_resources) $(my_static_library_extra_packages) \
+ $(AAPT2) $(SOONG_ZIP) $(EXTRACT_JAR_PACKAGES)
@echo "AAPT2 link $@"
$(call aapt2-link)
ifdef R_file_stamp
diff --git a/core/autogen_test_config.mk b/core/autogen_test_config.mk
index c359bac..d2eb7c3 100644
--- a/core/autogen_test_config.mk
+++ b/core/autogen_test_config.mk
@@ -24,8 +24,13 @@
autogen_test_config_file := $(dir $(LOCAL_BUILT_MODULE))$(LOCAL_MODULE).config
ifeq (true,$(is_native))
+ifeq ($(LOCAL_NATIVE_BENCHMARK),true)
+autogen_test_config_template := $(NATIVE_BENCHMARK_TEST_CONFIG_TEMPLATE)
+else
+autogen_test_config_template := $(NATIVE_TEST_CONFIG_TEMPLATE)
+endif
# Auto generating test config file for native test
-$(autogen_test_config_file) : $(NATIVE_TEST_CONFIG_TEMPLATE)
+$(autogen_test_config_file) : $(autogen_test_config_template)
@echo "Auto generating test config $(notdir $@)"
$(hide) sed 's&{MODULE}&$(PRIVATE_MODULE)&g' $^ > $@
my_auto_generate_config := true
diff --git a/core/base_rules.mk b/core/base_rules.mk
index 94c323e..63c6c52 100644
--- a/core/base_rules.mk
+++ b/core/base_rules.mk
@@ -546,10 +546,6 @@
is_native := true
multi_arch := true
endif
-ifeq ($(LOCAL_MODULE_CLASS),NATIVE_BENCHMARK)
- is_native := true
- multi_arch := true
-endif
ifdef LOCAL_MULTILIB
multi_arch := true
endif
@@ -646,6 +642,13 @@
endif # LOCAL_COMPATIBILITY_SUITE
###########################################################
+## Add test module to ALL_DISABLED_PRESUBMIT_TESTS if LOCAL_PRESUBMIT_DISABLED is set to true.
+###########################################################
+ifeq ($(LOCAL_PRESUBMIT_DISABLED),true)
+ ALL_DISABLED_PRESUBMIT_TESTS += $(LOCAL_MODULE)
+endif # LOCAL_PRESUBMIT_DISABLED
+
+###########################################################
## Register with ALL_MODULES
###########################################################
@@ -679,11 +682,32 @@
ALL_MODULES.$(my_register_name).PICKUP_FILES := \
$(ALL_MODULES.$(my_register_name).PICKUP_FILES) $(LOCAL_PICKUP_FILES)
endif
+
my_required_modules := $(LOCAL_REQUIRED_MODULES) \
$(LOCAL_REQUIRED_MODULES_$(TARGET_$(LOCAL_2ND_ARCH_VAR_PREFIX)ARCH))
ifdef LOCAL_IS_HOST_MODULE
my_required_modules += $(LOCAL_REQUIRED_MODULES_$($(my_prefix)OS))
endif
+
+###############################################################################
+## When compiling against the VNDK, add the .vendor suffix to required modules.
+###############################################################################
+ifneq ($(LOCAL_USE_VNDK),)
+ ####################################################
+ ## Soong modules may be built twice, once for /system
+ ## and once for /vendor. If we're using the VNDK,
+ ## switch all soong libraries over to the /vendor
+ ## variant.
+ ####################################################
+ ifneq ($(LOCAL_MODULE_MAKEFILE),$(SOONG_ANDROID_MK))
+ # We don't do this renaming for soong-defined modules since they already
+ # have correct names (with .vendor suffix when necessary) in their
+ # LOCAL_*_LIBRARIES.
+ my_required_modules := $(foreach l,$(my_required_modules),\
+ $(if $(SPLIT_VENDOR.SHARED_LIBRARIES.$(l)),$(l).vendor,$(l)))
+ endif
+endif
+
ALL_MODULES.$(my_register_name).REQUIRED := \
$(strip $(ALL_MODULES.$(my_register_name).REQUIRED) $(my_required_modules))
ALL_MODULES.$(my_register_name).EXPLICITLY_REQUIRED := \
diff --git a/core/binary.mk b/core/binary.mk
index a5f46da..39f1161 100644
--- a/core/binary.mk
+++ b/core/binary.mk
@@ -547,7 +547,11 @@
my_host_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CFLAGS)
my_host_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CONLYFLAGS) $(my_c_std_conlyflags)
my_host_global_cppflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_CPPFLAGS) $(my_cpp_std_cppflags)
-my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LDFLAGS)
+ifeq ($(my_use_clang_lld),true)
+ my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LLDFLAGS)
+else
+ my_host_global_ldflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)CLANG_$(my_prefix)GLOBAL_LDFLAGS)
+endif # my_use_clang_lld
else
my_host_global_cflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CFLAGS)
my_host_global_conlyflags := $($(LOCAL_2ND_ARCH_VAR_PREFIX)$(my_prefix)GLOBAL_CONLYFLAGS) $(my_c_std_conlyflags)
diff --git a/core/clear_vars.mk b/core/clear_vars.mk
index 62549d9..3325752 100644
--- a/core/clear_vars.mk
+++ b/core/clear_vars.mk
@@ -163,6 +163,7 @@
LOCAL_MODULE_UNSUPPORTED_TARGET_ARCH:=
LOCAL_MODULE_UNSUPPORTED_TARGET_ARCH_WARN:=
LOCAL_MULTILIB:=
+LOCAL_NATIVE_BENCHMARK:=
LOCAL_NDK_STL_VARIANT:=
LOCAL_NDK_VERSION:=current
LOCAL_NO_CRT:=
@@ -196,6 +197,7 @@
LOCAL_PREBUILT_OBJ_FILES:=
LOCAL_PREBUILT_STATIC_JAVA_LIBRARIES:=
LOCAL_PREBUILT_STRIP_COMMENTS:=
+LOCAL_PRESUBMIT_DISABLED:=
LOCAL_PRIVATE_PLATFORM_APIS:=
LOCAL_PRIVILEGED_MODULE:=
# '',full,custom,disabled,obfuscation,optimization
@@ -229,6 +231,7 @@
LOCAL_SANITIZE_DIAG:=
LOCAL_SANITIZE_RECOVER:=
LOCAL_SANITIZE_BLACKLIST :=
+LOCAL_SDK_LIBRARIES :=
LOCAL_SDK_RES_VERSION:=
LOCAL_SDK_VERSION:=
LOCAL_SHARED_ANDROID_LIBRARIES:=
@@ -241,6 +244,7 @@
LOCAL_SOONG_PROGUARD_DICT :=
LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE :=
LOCAL_SOONG_RRO_DIRS :=
+LOCAL_SOONG_STATIC_LIBRARY_EXTRA_PACKAGES :=
LOCAL_DROIDDOC_STUBS_SRCJAR :=
LOCAL_DROIDDOC_DOC_ZIP :=
# '',true
diff --git a/core/config.mk b/core/config.mk
index a98dd21..39dbf55 100644
--- a/core/config.mk
+++ b/core/config.mk
@@ -98,6 +98,11 @@
# Some specific paths to tools
SRC_DROIDDOC_DIR := $(TOPDIR)build/make/tools/droiddoc
+# Mark some inputs as readonly
+ifdef TARGET_DEVICE_DIR
+ .KATI_READONLY := TARGET_DEVICE_DIR
+endif
+
# Set up efficient math functions which are used in make.
# Here since this file is included by envsetup as well as during build.
include $(BUILD_SYSTEM)/math.mk
@@ -151,6 +156,7 @@
BUILD_TARGET_TEST_CONFIG := $(BUILD_SYSTEM)/target_test_config.mk
INSTRUMENTATION_TEST_CONFIG_TEMPLATE := $(BUILD_SYSTEM)/instrumentation_test_config_template.xml
+NATIVE_BENCHMARK_TEST_CONFIG_TEMPLATE := $(BUILD_SYSTEM)/native_benchmark_test_config_template.xml
NATIVE_TEST_CONFIG_TEMPLATE := $(BUILD_SYSTEM)/native_test_config_template.xml
EMPTY_TEST_CONFIG := $(BUILD_SYSTEM)/empty_test_config.xml
@@ -958,21 +964,28 @@
SUPPORT_LIBRARY_ROOT := frameworks/support
endif
+get-sdk-version = $(if $(findstring _,$(1)),$(subst core_,,$(subst system_,,$(subst test_,,$(1)))),$(1))
+get-sdk-api = $(if $(findstring _,$(1)),$(patsubst %_$(call get-sdk-version,$(1)),%,$(1)),public)
+get-prebuilt-sdk-dir = $(HISTORICAL_SDK_VERSIONS_ROOT)/$(call get-sdk-version,$(1))/$(call get-sdk-api,$(1))
+
# Resolve LOCAL_SDK_VERSION to prebuilt module name, e.g.:
# 23 -> sdk_public_23_android
# system_current -> sdk_system_current_android
# $(1): An sdk version (LOCAL_SDK_VERSION)
+# $(2): optional library name (default: android)
define resolve-prebuilt-sdk-module
$(if $(findstring _,$(1)),\
- sdk_$(1)_android,\
- sdk_public_$(1)_android)
+ sdk_$(1)_$(or $(2),android),\
+ sdk_public_$(1)_$(or $(2),android))
endef
+# Resolve LOCAL_SDK_VERSION to prebuilt android.jar
+# $(1): LOCAL_SDK_VERSION
+resolve-prebuilt-sdk-jar-path = $(call get-prebuilt-sdk-dir,$(1))/android.jar
+
# Resolve LOCAL_SDK_VERSION to prebuilt framework.aidl
# $(1): An sdk version (LOCAL_SDK_VERSION)
-define resolve-prebuilt-aidl-path
-$(HISTORICAL_SDK_VERSIONS_ROOT)/$(subst core_,,$(subst system_,,$(subst test_,,$(1))))/public/framework.aidl
-endef
+resolve-prebuilt-sdk-aidl-path = $(call get-prebuilt-sdk-dir,$(call get-sdk-version,$(1)))/framework.aidl
# Historical SDK version N is stored in $(HISTORICAL_SDK_VERSIONS_ROOT)/N.
# The 'current' version is whatever this source tree is.
diff --git a/core/definitions.mk b/core/definitions.mk
index fe96688..092a778 100644
--- a/core/definitions.mk
+++ b/core/definitions.mk
@@ -102,6 +102,9 @@
# All installed vintf manifest fragments for a partition at
ALL_VINTF_MANIFEST_FRAGMENTS_LIST:=
+# All tests that should be skipped in presubmit check.
+ALL_DISABLED_PRESUBMIT_TESTS :=
+
###########################################################
## Debugging; prints a variable list to stdout
###########################################################
@@ -2122,6 +2125,7 @@
$(call dump-words-to-file,$(PRIVATE_OVERLAY_FLAT),$(dir $@)aapt2-flat-overlay-list)
$(hide) $(AAPT2) link -o $@ \
$(PRIVATE_AAPT_FLAGS) \
+ $(if $(PRIVATE_STATIC_LIBRARY_EXTRA_PACKAGES),$$(cat $(PRIVATE_STATIC_LIBRARY_EXTRA_PACKAGES))) \
$(addprefix --manifest ,$(PRIVATE_ANDROID_MANIFEST)) \
$(addprefix -I ,$(PRIVATE_AAPT_INCLUDES)) \
$(addprefix -I ,$(PRIVATE_SHARED_ANDROID_LIBRARIES)) \
@@ -2140,6 +2144,7 @@
-R \@$(dir $@)aapt2-flat-overlay-list \
\@$(dir $@)aapt2-flat-list
$(SOONG_ZIP) -o $(PRIVATE_SRCJAR) -C $(PRIVATE_JAVA_GEN_DIR) -D $(PRIVATE_JAVA_GEN_DIR)
+$(EXTRACT_JAR_PACKAGES) -i $(PRIVATE_SRCJAR) -o $(PRIVATE_AAPT_EXTRA_PACKAGES) --prefix '--extra-packages '
endef
###########################################################
diff --git a/core/dex_preopt_libart.mk b/core/dex_preopt_libart.mk
index d8ab416..10522ac 100644
--- a/core/dex_preopt_libart.mk
+++ b/core/dex_preopt_libart.mk
@@ -118,7 +118,6 @@
@mkdir -p $(dir $@)
ANDROID_LOG_TAGS="*:e" $(PROFMAN) \
--create-profile-from=$(PRIVATE_PROFILE_INPUT_LOCATION) \
- --skip-apk-verification \
$(addprefix --apk=,$(LIBART_TARGET_BOOT_DEX_FILES)) \
$(addprefix --dex-location=,$(LIBART_TARGET_BOOT_DEX_LOCATIONS)) \
--reference-profile-file=$@
diff --git a/core/dex_preopt_odex_install.mk b/core/dex_preopt_odex_install.mk
index c257f93..089df6f 100644
--- a/core/dex_preopt_odex_install.mk
+++ b/core/dex_preopt_odex_install.mk
@@ -91,23 +91,32 @@
built_installed_odex :=
built_installed_vdex :=
built_installed_art :=
+my_process_profile :=
+my_profile_is_text_listing :=
ifeq (false,$(WITH_DEX_PREOPT_GENERATE_PROFILE))
LOCAL_DEX_PREOPT_GENERATE_PROFILE := false
endif
ifndef LOCAL_DEX_PREOPT_GENERATE_PROFILE
+
+
# If LOCAL_DEX_PREOPT_GENERATE_PROFILE is not defined, default it based on the existence of the
# profile class listing. TODO: Use product specific directory here.
my_classes_directory := $(PRODUCT_DEX_PREOPT_PROFILE_DIR)
-LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING := $(my_classes_directory)/$(LOCAL_MODULE).prof.txt
-ifneq (,$(wildcard $(LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING)))
-# Profile listing exists, use it to generate the profile.
-LOCAL_DEX_PREOPT_GENERATE_PROFILE := true
+LOCAL_DEX_PREOPT_PROFILE := $(my_classes_directory)/$(LOCAL_MODULE).prof
+
+ifneq (,$(wildcard $(LOCAL_DEX_PREOPT_PROFILE)))
+my_process_profile := true
+my_profile_is_text_listing := false
endif
+else
+my_process_profile := $(LOCAL_DEX_PREOPT_GENERATE_PROFILE)
+my_profile_is_text_listing := true
+LOCAL_DEX_PREOPT_PROFILE := $(LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING)
endif
-ifeq (true,$(LOCAL_DEX_PREOPT_GENERATE_PROFILE))
+ifeq (true,$(my_process_profile))
ifdef LOCAL_VENDOR_MODULE
$(call pretty-error, Internal error: profiles are not supported for vendor modules)
@@ -117,8 +126,8 @@
endif
endif
-ifndef LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING
-$(call pretty-error,Must have specified class listing (LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING))
+ifndef LOCAL_DEX_PREOPT_PROFILE
+$(call pretty-error,Must have specified class listing (LOCAL_DEX_PREOPT_PROFILE))
endif
ifeq (,$(dex_preopt_profile_src_file))
$(call pretty-error, Internal error: dex_preopt_profile_src_file must be set)
@@ -129,18 +138,36 @@
my_dex_location := $(patsubst %.gz,%,$(my_dex_location))
$(my_built_profile): PRIVATE_BUILT_MODULE := $(dex_preopt_profile_src_file)
$(my_built_profile): PRIVATE_DEX_LOCATION := $(my_dex_location)
-$(my_built_profile): PRIVATE_SOURCE_CLASSES := $(LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING)
-$(my_built_profile): $(LOCAL_DEX_PREOPT_PROFILE_CLASS_LISTING)
+$(my_built_profile): PRIVATE_SOURCE_CLASSES := $(LOCAL_DEX_PREOPT_PROFILE)
+$(my_built_profile): $(LOCAL_DEX_PREOPT_PROFILE)
$(my_built_profile): $(PROFMAN)
$(my_built_profile): $(dex_preopt_profile_src_file)
-$(my_built_profile):
+ifeq (true,$(my_profile_is_text_listing))
+# The profile is a test listing of classes (used for framework jars).
+# We need to generate the actual binary profile before being able to compile.
$(hide) mkdir -p $(dir $@)
ANDROID_LOG_TAGS="*:e" $(PROFMAN) \
--create-profile-from=$(PRIVATE_SOURCE_CLASSES) \
--apk=$(PRIVATE_BUILT_MODULE) \
--dex-location=$(PRIVATE_DEX_LOCATION) \
--reference-profile-file=$@
-dex_preopt_profile_src_file:=
+else
+# The profile is binary profile (used for apps). Run it through profman to
+# ensure the profile keys match the apk.
+$(my_built_profile):
+ $(hide) mkdir -p $(dir $@)
+ touch $@
+ ANDROID_LOG_TAGS="*:i" $(PROFMAN) \
+ --copy-and-update-profile-key \
+ --profile-file=$(PRIVATE_SOURCE_CLASSES) \
+ --apk=$(PRIVATE_BUILT_MODULE) \
+ --dex-location=$(PRIVATE_DEX_LOCATION) \
+ --reference-profile-file=$@ \
+ || echo "Profile out of date for $(PRIVATE_BUILT_MODULE)"
+endif
+
+my_profile_is_text_listing :=
+dex_preopt_profile_src_file :=
# Remove compressed APK extension.
my_installed_profile := $(patsubst %.gz,%,$(LOCAL_INSTALLED_MODULE)).prof
@@ -209,7 +236,7 @@
installed_art := $(strip $(installed_art))
ifdef built_odex
-ifeq (true,$(LOCAL_DEX_PREOPT_GENERATE_PROFILE))
+ifeq (true,$(my_process_profile))
$(built_odex): $(my_built_profile)
$(built_odex): PRIVATE_PROFILE_PREOPT_FLAGS := --profile-file=$(my_built_profile)
else
@@ -244,7 +271,7 @@
# 'speed' compiler filter.
LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=speed
else
- ifeq (true,$(LOCAL_DEX_PREOPT_GENERATE_PROFILE))
+ ifeq (true,$(my_process_profile))
# For non system server jars, use speed-profile when we have a profile.
LOCAL_DEX_PREOPT_FLAGS += --compiler-filter=speed-profile
else
@@ -364,4 +391,6 @@
ALL_MODULES.$(my_register_name).INSTALLED += $(my_installed_profile)
ALL_MODULES.$(my_register_name).BUILT_INSTALLED += $(build_installed_profile)
+my_process_profile :=
+
$(my_all_targets): $(my_installed_profile)
diff --git a/core/envsetup.mk b/core/envsetup.mk
index 12b5869..1a36703 100644
--- a/core/envsetup.mk
+++ b/core/envsetup.mk
@@ -241,17 +241,26 @@
# or under vendor/*/$(TARGET_DEVICE). Search in both places, but
# make sure only one exists.
# Real boards should always be associated with an OEM vendor.
-board_config_mk := \
- $(strip $(sort $(wildcard \
- $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
- $(shell test -d device && find -L device -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
- $(shell test -d vendor && find -L vendor -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
- )))
-ifeq ($(board_config_mk),)
- $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
-endif
-ifneq ($(words $(board_config_mk)),1)
- $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk))
+ifdef TARGET_DEVICE_DIR
+ ifneq ($(origin TARGET_DEVICE_DIR),command line)
+ $(error TARGET_DEVICE_DIR may not be set manually)
+ endif
+ board_config_mk := $(TARGET_DEVICE_DIR)/BoardConfig.mk
+else
+ board_config_mk := \
+ $(strip $(sort $(wildcard \
+ $(SRC_TARGET_DIR)/board/$(TARGET_DEVICE)/BoardConfig.mk \
+ $(shell test -d device && find -L device -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
+ $(shell test -d vendor && find -L vendor -maxdepth 4 -path '*/$(TARGET_DEVICE)/BoardConfig.mk') \
+ )))
+ ifeq ($(board_config_mk),)
+ $(error No config file found for TARGET_DEVICE $(TARGET_DEVICE))
+ endif
+ ifneq ($(words $(board_config_mk)),1)
+ $(error Multiple board config files for TARGET_DEVICE $(TARGET_DEVICE): $(board_config_mk))
+ endif
+ TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk)))
+ .KATI_READONLY := TARGET_DEVICE_DIR
endif
include $(board_config_mk)
ifeq ($(TARGET_ARCH),)
@@ -261,7 +270,6 @@
$(warning *** Unsupported option MALLOC_IMPL defined by board config: $(board_config_mk).)
$(error Use `MALLOC_SVELTE := true` to configure jemalloc for low-memory)
endif
-TARGET_DEVICE_DIR := $(patsubst %/,%,$(dir $(board_config_mk)))
board_config_mk :=
###########################################
diff --git a/core/java.mk b/core/java.mk
index 94b7bcb..ad9c71f 100644
--- a/core/java.mk
+++ b/core/java.mk
@@ -120,7 +120,7 @@
# LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS
aidl_preprocess_import := $(TARGET_OUT_COMMON_INTERMEDIATES)/framework.aidl
else
- aidl_preprocess_import := $(call resolve-prebuilt-aidl-path,$(LOCAL_SDK_VERSION))
+ aidl_preprocess_import := $(call resolve-prebuilt-sdk-aidl-path,$(LOCAL_SDK_VERSION))
endif # not current or system_current
else
# build against the platform.
diff --git a/core/java_common.mk b/core/java_common.mk
index a65b6ef..2695aff 100644
--- a/core/java_common.mk
+++ b/core/java_common.mk
@@ -225,11 +225,27 @@
$(LOCAL_INTERMEDIATE_TARGETS): PRIVATE_RMTYPEDEFS := $(LOCAL_RMTYPEDEFS)
+# Sanity check class path vars.
+disallowed_deps := $(foreach sdk,$(TARGET_AVAILABLE_SDK_VERSIONS),$(call resolve-prebuilt-sdk-module,$(sdk)))
+disallowed_deps += $(foreach sdk,$(TARGET_AVAILABLE_SDK_VERSIONS),\
+ $(foreach sdk_lib,$(JAVA_SDK_LIBRARIES),$(call resolve-prebuilt-sdk-module,$(sdk),$(sdk_lib))))
+bad_deps := $(filter $(disallowed_deps),$(LOCAL_JAVA_LIBRARIES) $(LOCAL_STATIC_JAVA_LIBRARIES))
+ifneq (,$(bad_deps))
+ $(call pretty-error,SDK modules should not be depended on directly. Please use LOCAL_SDK_VERSION for $(bad_deps))
+endif
+
full_java_bootclasspath_libs :=
empty_bootclasspath :=
my_system_modules :=
ifndef LOCAL_IS_HOST_MODULE
+ sdk_libs :=
+
+ # When an sdk lib name is listed in LOCAL_JAVA_LIBRARIES, move it to LOCAL_SDK_LIBRARIES, so that
+ # it is correctly redirected to the stubs library.
+ LOCAL_SDK_LIBRARIES += $(filter $(JAVA_SDK_LIBRARIES),$(LOCAL_JAVA_LIBRARIES))
+ LOCAL_JAVA_LIBRARIES := $(filter-out $(JAVA_SDK_LIBRARIES),$(LOCAL_JAVA_LIBRARIES))
+
ifeq ($(LOCAL_SDK_VERSION),)
ifeq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
# No bootclasspath. But we still need "" to prevent javac from using default host bootclasspath.
@@ -243,6 +259,9 @@
LOCAL_JAVA_LIBRARIES := $(filter-out $(TARGET_DEFAULT_BOOTCLASSPATH_LIBRARIES) $(TARGET_DEFAULT_JAVA_LIBRARIES),$(LOCAL_JAVA_LIBRARIES))
my_system_modules := $(DEFAULT_SYSTEM_MODULES)
endif # LOCAL_NO_STANDARD_LIBRARIES
+ # When SDK libraries are referenced from modules built without SDK, provide the system stub to them
+ # because it has the largest API surface.
+ sdk_libs := $(foreach lib_name,$(LOCAL_SDK_LIBRARIES),$(lib_name).stubs.system)
else
ifeq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
$(call pretty-error,Must not define both LOCAL_NO_STANDARD_LIBRARIES and LOCAL_SDK_VERSION)
@@ -251,21 +270,30 @@
$(call pretty-error,Invalid LOCAL_SDK_VERSION '$(LOCAL_SDK_VERSION)' \
Choices are: $(TARGET_AVAILABLE_SDK_VERSIONS))
endif
- ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),current)
- # LOCAL_SDK_VERSION is current and no TARGET_BUILD_APPS.
- full_java_bootclasspath_libs := $(call java-lib-header-files,android_stubs_current)
- else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),system_current)
- full_java_bootclasspath_libs := $(call java-lib-header-files,android_system_stubs_current)
- else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),test_current)
- full_java_bootclasspath_libs := $(call java-lib-header-files,android_test_stubs_current)
- else ifeq ($(LOCAL_SDK_VERSION)$(TARGET_BUILD_APPS),core_current)
- full_java_bootclasspath_libs := $(call java-lib-header-files,core.current.stubs)
+
+ ifneq (,$(TARGET_BUILD_APPS)$(filter-out %current,$(LOCAL_SDK_VERSION)))
+ # TARGET_BUILD_APPS mode or numbered SDK. Use prebuilt modules.
+ sdk_module := $(call resolve-prebuilt-sdk-module,$(LOCAL_SDK_VERSION))
+ sdk_libs := $(foreach lib_name,$(LOCAL_SDK_LIBRARIES),$(call resolve-prebuilt-sdk-module,$(LOCAL_SDK_VERSION),$(lib_name)))
else
- # TARGET_BUILD_APPS is set. Use the modules defined in prebuilts/sdk/Android.mk.
- _module_name := $(call resolve-prebuilt-sdk-module,$(LOCAL_SDK_VERSION))
- full_java_bootclasspath_libs := $(call java-lib-header-files,$(_module_name))
- _module_name :=
- endif # current, system_current, system_${VER}, test_current or core_current
+ # Note: the lib naming scheme must be kept in sync with build/soong/java/sdk_library.go.
+ sdk_lib_suffix = $(call pretty-error,sdk_lib_suffix was not set correctly)
+ ifeq (current,$(LOCAL_SDK_VERSION))
+ sdk_module := android_stubs_current
+ sdk_lib_suffix := .stubs
+ else ifeq (system_current,$(LOCAL_SDK_VERSION))
+ sdk_module := android_system_stubs_current
+ sdk_lib_suffix := .stubs.system
+ else ifeq (test_current,$(LOCAL_SDK_VERSION))
+ sdk_module := android_test_stubs_current
+ sdk_lib_suffix := .stubs.test
+ else ifeq (core_current,$(LOCAL_SDK_VERSION))
+ sdk_module := core.current.stubs
+ sdk_lib_suffix = $(call pretty-error,LOCAL_SDK_LIBRARIES not supported for LOCAL_SDK_VERSION = core_current)
+ endif
+ sdk_libs := $(foreach lib_name,$(LOCAL_SDK_LIBRARIES),$(lib_name)$(sdk_lib_suffix))
+ endif
+ full_java_bootclasspath_libs := $(call java-lib-header-files,$(sdk_module))
endif # LOCAL_SDK_VERSION
ifneq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
@@ -291,10 +319,9 @@
full_java_bootclasspath_libs += $(call java-lib-header-files,core-lambda-stubs)
endif
endif
-
- full_shared_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
- full_shared_java_header_libs := $(call java-lib-header-files,$(LOCAL_JAVA_LIBRARIES),$(LOCAL_IS_HOST_MODULE))
-
+ full_shared_java_libs := $(call java-lib-files,$(LOCAL_JAVA_LIBRARIES) $(sdk_libs),$(LOCAL_IS_HOST_MODULE))
+ full_shared_java_header_libs := $(call java-lib-header-files,$(LOCAL_JAVA_LIBRARIES) $(sdk_libs),$(LOCAL_IS_HOST_MODULE))
+ sdk_libs :=
else # LOCAL_IS_HOST_MODULE
ifeq ($(USE_CORE_LIB_BOOTCLASSPATH),true)
diff --git a/core/main.mk b/core/main.mk
index 16e70eb..2ef17a2 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -898,6 +898,9 @@
# by the appropriate product definition file, which was included
# by product_config.mk.
product_MODULES := $(PRODUCTS.$(INTERNAL_PRODUCT).PRODUCT_PACKAGES)
+ifdef BOARD_VNDK_VERSION
+ product_MODULES += vndk_package
+endif
# Filter out the overridden packages before doing expansion
product_MODULES := $(filter-out $(foreach p, $(product_MODULES), \
$(PACKAGES.$(p).OVERRIDES)), $(product_MODULES))
diff --git a/core/native_benchmark_test_config_template.xml b/core/native_benchmark_test_config_template.xml
new file mode 100644
index 0000000..18736bf
--- /dev/null
+++ b/core/native_benchmark_test_config_template.xml
@@ -0,0 +1,28 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2018 The Android Open Source Project
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+<!-- This test config file is auto-generated. -->
+<configuration description="Runs {MODULE}.">
+ <option name="test-suite-tag" value="apct" />
+ <option name="test-suite-tag" value="apct-native-metric" />
+ <target_preparer class="com.android.tradefed.targetprep.PushFilePreparer">
+ <option name="cleanup" value="true" />
+ <option name="push" value="{MODULE}->/data/local/tmp/{MODULE}" />
+ </target_preparer>
+ <test class="com.android.tradefed.testtype.GoogleBenchmarkTest" >
+ <option name="native-benchmark-device-path" value="/data/local/tmp" />
+ <option name="benchmark-module-name" value="{MODULE}" />
+ </test>
+</configuration>
diff --git a/core/package_internal.mk b/core/package_internal.mk
index fba50a1..ac4b53c 100644
--- a/core/package_internal.mk
+++ b/core/package_internal.mk
@@ -486,7 +486,7 @@
else ifneq ($(filter-out current system_current test_current,$(LOCAL_SDK_RES_VERSION))$(if $(TARGET_BUILD_APPS),$(filter current system_current test_current,$(LOCAL_SDK_RES_VERSION))),)
# for released sdk versions, the platform resources were built into android.jar.
framework_res_package_export := \
- $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_RES_VERSION)/android.jar
+ $(call resolve-prebuilt-sdk-jar-path,$(LOCAL_SDK_RES_VERSION))
else # LOCAL_SDK_RES_VERSION
framework_res_package_export := \
$(call intermediates-dir-for,APPS,framework-res,,COMMON)/package-export.apk
diff --git a/core/prebuilt_internal.mk b/core/prebuilt_internal.mk
index ad081d5..8aa5b96 100644
--- a/core/prebuilt_internal.mk
+++ b/core/prebuilt_internal.mk
@@ -627,7 +627,7 @@
ifneq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
ifneq ($(filter-out current system_current test_current,$(LOCAL_SDK_RES_VERSION))$(if $(TARGET_BUILD_APPS),$(filter current system_current test_current,$(LOCAL_SDK_RES_VERSION))),)
framework_res_package_export := \
- $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_RES_VERSION)/android.jar
+ $(call resolve-prebuilt-sdk-jar-path,$(LOCAL_SDK_RES_VERSION))
else
framework_res_package_export := \
$(call intermediates-dir-for,APPS,framework-res,,COMMON)/package-export.apk
diff --git a/core/product.mk b/core/product.mk
index 1a15c9f..976c939 100644
--- a/core/product.mk
+++ b/core/product.mk
@@ -23,21 +23,12 @@
# and the .mk suffix) of the product makefile, "<product_name>:" can be
# omitted.
-# Search for AndroidProducts.mks in the given dir.
-# $(1): the path to the dir
-define _search-android-products-files-in-dir
-$(sort $(shell test -d $(1) && find -L $(1) \
- -maxdepth 6 \
- -name .git -prune \
- -o -name AndroidProducts.mk -print))
-endef
-
#
# Returns the list of all AndroidProducts.mk files.
# $(call ) isn't necessary.
#
define _find-android-products-files
-$(foreach d, device vendor product,$(call _search-android-products-files-in-dir,$(d))) \
+$(file <$(OUT_DIR)/.module_paths/AndroidProducts.mk.list) \
$(SRC_TARGET_DIR)/product/AndroidProducts.mk
endef
diff --git a/core/soong_java_prebuilt.mk b/core/soong_java_prebuilt.mk
index 63a1e2e..58735cd 100644
--- a/core/soong_java_prebuilt.mk
+++ b/core/soong_java_prebuilt.mk
@@ -40,22 +40,30 @@
$(intermediates.COMMON)/jacoco-report-classes.jar)
endif
-ifdef LOCAL_SOONG_EXPORT_PROGUARD_FLAGS
- $(eval $(call copy-one-file,$(LOCAL_SOONG_EXPORT_PROGUARD_FLAGS),\
- $(intermediates.COMMON)/export_proguard_flags))
- $(call add-dependency,$(LOCAL_BUILT_MODULE),\
- $(intermediates.COMMON)/export_proguard_flags)
-endif
-
ifdef LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE
-my_res_package := $(intermediates.COMMON)/package-res.apk
+ my_res_package := $(intermediates.COMMON)/package-res.apk
-$(my_res_package): $(LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE)
- @echo "Copy: $$@"
+ $(my_res_package): $(LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE)
+ @echo "Copy: $@"
$(copy-file-to-target)
-$(call add-dependency,$(LOCAL_BUILT_MODULE),$(my_res_package))
+ $(call add-dependency,$(LOCAL_BUILT_MODULE),$(my_res_package))
+ my_proguard_flags := $(intermediates.COMMON)/export_proguard_flags
+ $(my_proguard_flags): $(LOCAL_SOONG_EXPORT_PROGUARD_FLAGS)
+ @echo "Export proguard flags: $@"
+ rm -f $@
+ touch $@
+ for f in $+; do \
+ echo -e "\n# including $$f" >>$@; \
+ cat $$f >>$@; \
+ done
+
+ $(call add-dependency,$(LOCAL_BUILT_MODULE),$(my_proguard_flags))
+
+ my_static_library_extra_packages := $(intermediates.COMMON)/extra_packages
+ $(eval $(call copy-one-file,$(LOCAL_SOONG_STATIC_LIBRARY_EXTRA_PACKAGES),$(my_static_library_extra_packages)))
+ $(call add-dependency,$(LOCAL_BUILT_MODULE),$(my_static_library_extra_packages))
endif # LOCAL_SOONG_RESOURCE_EXPORT_PACKAGE
ifneq ($(TURBINE_ENABLED),false)
diff --git a/core/static_java_library.mk b/core/static_java_library.mk
index 7edf2e2..a3f560c 100644
--- a/core/static_java_library.mk
+++ b/core/static_java_library.mk
@@ -107,7 +107,7 @@
ifneq ($(LOCAL_NO_STANDARD_LIBRARIES),true)
ifneq ($(filter-out current system_current test_current,$(LOCAL_SDK_RES_VERSION))$(if $(TARGET_BUILD_APPS),$(filter current system_current test_current,$(LOCAL_SDK_RES_VERSION))),)
framework_res_package_export := \
- $(HISTORICAL_SDK_VERSIONS_ROOT)/$(LOCAL_SDK_RES_VERSION)/android.jar
+ $(call resolve-prebuilt-sdk-jar-path,$(LOCAL_SDK_RES_VERSION))
else
framework_res_package_export := \
$(call intermediates-dir-for,APPS,framework-res,,COMMON)/package-export.apk
diff --git a/core/tasks/test_mapping.mk b/core/tasks/test_mapping.mk
index 36275b0..da64cab 100644
--- a/core/tasks/test_mapping.mk
+++ b/core/tasks/test_mapping.mk
@@ -12,7 +12,9 @@
# See the License for the specific language governing permissions and
# limitations under the License.
-# Create an artifact to include TEST_MAPPING files in source tree.
+# Create an artifact to include TEST_MAPPING files in source tree. Also include
+# a file (out/disabled-presubmit-tests) containing the tests that should be
+# skipped in presubmit check.
.PHONY: test_mapping
@@ -21,13 +23,15 @@
test_mapping_list := $(OUT_DIR)/.module_paths/TEST_MAPPING.list
test_mappings := $(file <$(test_mapping_list))
$(test_mappings_zip) : PRIVATE_test_mappings := $(subst $(newline),\n,$(test_mappings))
+$(test_mappings_zip) : PRIVATE_all_disabled_presubmit_tests := $(ALL_DISABLED_PRESUBMIT_TESTS)
$(test_mappings_zip) : $(test_mappings) $(SOONG_ZIP)
- @echo "Building artifact to include TEST_MAPPING files."
- rm -rf $@
+ @echo "Building artifact to include TEST_MAPPING files and tests to skip in presubmit check."
+ rm -rf $@ $(dir $@)/disabled-presubmit-tests
+ echo $(sort $(PRIVATE_all_disabled_presubmit_tests)) | tr " " "\n" > $(dir $@)/disabled-presubmit-tests
echo -e "$(PRIVATE_test_mappings)" > $@.list
- $(SOONG_ZIP) -o $@ -C . -l $@.list
- rm -f $@.list
+ $(SOONG_ZIP) -o $@ -C . -l $@.list -C $(dir $@) -f $(dir $@)/disabled-presubmit-tests
+ rm -f $@.list $(dir $@)/disabled-presubmit-tests
test_mapping : $(test_mappings_zip)
diff --git a/core/use_lld_setup.mk b/core/use_lld_setup.mk
index 69ceddc..17a9e27 100644
--- a/core/use_lld_setup.mk
+++ b/core/use_lld_setup.mk
@@ -12,3 +12,11 @@
my_use_clang_lld := true
endif
endif
+
+# Do not use LLD for Darwin host executables or shared libraries.
+# See https://lld.llvm.org/AtomLLD.html for status of lld for Mach-O.
+ifeq ($(LOCAL_IS_HOST_MODULE),true)
+ ifeq ($(HOST_OS),darwin)
+ my_use_clang_lld := false
+ endif
+endif
diff --git a/core/version_defaults.mk b/core/version_defaults.mk
index 773dc24..8c36359 100644
--- a/core/version_defaults.mk
+++ b/core/version_defaults.mk
@@ -39,9 +39,9 @@
include $(INTERNAL_BUILD_ID_MAKEFILE)
endif
-DEFAULT_PLATFORM_VERSION := PPR1
-MIN_PLATFORM_VERSION := PPR1
-MAX_PLATFORM_VERSION := PPR1
+DEFAULT_PLATFORM_VERSION := QPR1
+MIN_PLATFORM_VERSION := QPR1
+MAX_PLATFORM_VERSION := QPR1
ALLOWED_VERSIONS := $(call allowed-platform-versions,\
$(MIN_PLATFORM_VERSION),\
@@ -83,10 +83,12 @@
# in the following text file:
# cts/tests/tests/os/assets/platform_versions.txt
PLATFORM_VERSION.PPR1 := P
+PLATFORM_VERSION.QPR1 := Q
# These are the current development codenames, if the build is not a final
# release build. If this is a final release build, it is simply "REL".
PLATFORM_VERSION_CODENAME.PPR1 := P
+PLATFORM_VERSION_CODENAME.QPR1 := Q
ifndef PLATFORM_VERSION
PLATFORM_VERSION := $(PLATFORM_VERSION.$(TARGET_PLATFORM_VERSION))
diff --git a/target/board/generic/BoardConfig.mk b/target/board/generic/BoardConfig.mk
index 9bf3c8b..ee1bde5 100644
--- a/target/board/generic/BoardConfig.mk
+++ b/target/board/generic/BoardConfig.mk
@@ -27,18 +27,11 @@
BOARD_USES_GENERIC_AUDIO := true
TARGET_BOOTLOADER_BOARD_NAME := goldfish_$(TARGET_ARCH)
+TARGET_USES_64_BIT_BINDER := true
+
# no hardware camera
USE_CAMERA_STUB := true
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
- ifeq ($(WITH_DEXPREOPT),)
- WITH_DEXPREOPT := true
- WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := false
- endif
-endif
-
TARGET_USES_HWC2 := true
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
@@ -51,7 +44,8 @@
USE_OPENGL_RENDERER := true
TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2147483648 # 2 GB
+# Partition size is default 1.5GB (1536MB) for 64 bits projects
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736
BOARD_USERDATAIMAGE_PARTITION_SIZE := 576716800
TARGET_COPY_OUT_VENDOR := vendor
# ~100 MB vendor image. Please adjust system image / vendor image sizes
@@ -65,6 +59,13 @@
BOARD_SEPOLICY_DIRS += build/target/board/generic/sepolicy
BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
+ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
+# GSI is always userdebug and needs a couple of properties taking precedence
+# over those set by the vendor.
+TARGET_SYSTEM_PROP := build/make/target/board/treble_system.prop
+endif
+BOARD_VNDK_VERSION := current
+
# Enable A/B update
TARGET_NO_RECOVERY := true
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
diff --git a/target/board/generic/device.mk b/target/board/generic/device.mk
index e18c165..d2f6310 100644
--- a/target/board/generic/device.mk
+++ b/target/board/generic/device.mk
@@ -23,9 +23,26 @@
PRODUCT_COPY_FILES := \
device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
- device/generic/goldfish/camera/media_profiles.xml:system/etc/media_profiles.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
- device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml \
+ device/generic/goldfish/camera/media_profiles.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles.xml \
+ frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \
+ frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \
+ frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \
+ device/generic/goldfish/camera/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml \
hardware/libhardware_legacy/audio/audio_policy.conf:system/etc/audio_policy.conf
+
+# minimal configuration for audio policy.
+PRODUCT_COPY_FILES += \
+ frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
+ frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
+
+# NFC:
+# Provide default libnfc-nci.conf file for devices that does not have one in
+# vendor/etc because aosp system image (of aosp_$arch products) is going to
+# be used as GSI.
+# May need to remove the following for newly launched devices in P since this
+# NFC configuration file should be in vendor/etc, instead of system/etc
+PRODUCT_COPY_FILES += \
+ device/generic/common/nfc/libnfc-nci.conf:system/etc/libnfc-nci.conf
diff --git a/target/board/generic_arm64/BoardConfig.mk b/target/board/generic_arm64/BoardConfig.mk
index dbdec90..ee4103d 100644
--- a/target/board/generic_arm64/BoardConfig.mk
+++ b/target/board/generic_arm64/BoardConfig.mk
@@ -61,15 +61,6 @@
# no hardware camera
USE_CAMERA_STUB := true
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
- ifeq ($(WITH_DEXPREOPT),)
- WITH_DEXPREOPT := true
- WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := false
- endif
-endif
-
TARGET_USES_HWC2 := true
NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
@@ -82,7 +73,8 @@
USE_OPENGL_RENDERER := true
TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2684354560 # 2.5 GB
+# Partition size is default 1.5GB (1536MB) for 64 bits projects
+BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612736
BOARD_USERDATAIMAGE_PARTITION_SIZE := 576716800
TARGET_COPY_OUT_VENDOR := vendor
# ~100 MB vendor image. Please adjust system image / vendor image sizes
@@ -96,6 +88,24 @@
BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED := true
BOARD_SEPOLICY_DIRS += build/target/board/generic/sepolicy
+ifneq (,$(filter userdebug eng,$(TARGET_BUILD_VARIANT)))
+# GSI is always userdebug and needs a couple of properties taking precedence
+# over those set by the vendor.
+TARGET_SYSTEM_PROP := build/make/target/board/treble_system.prop
+endif
+BOARD_VNDK_VERSION := current
+
+# Emulator system image is going to be used as GSI and some vendor still hasn't
+# cleaned up all device specific directories under root!
+
+# TODO(jiyong) These might be SoC specific.
+BOARD_ROOT_EXTRA_FOLDERS += firmware firmware/radio persist
+BOARD_ROOT_EXTRA_SYMLINKS := /vendor/lib/dsp:/dsp
+
+# TODO(b/36764215): remove this setting when the generic system image
+# no longer has QCOM-specific directories under /.
+BOARD_SEPOLICY_DIRS += build/target/board/generic_arm64_ab/sepolicy
+
# Enable A/B update
TARGET_NO_RECOVERY := true
BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
diff --git a/target/board/generic_arm64/device.mk b/target/board/generic_arm64/device.mk
index ca287eb..8d62f4b 100644
--- a/target/board/generic_arm64/device.mk
+++ b/target/board/generic_arm64/device.mk
@@ -23,11 +23,28 @@
PRODUCT_COPY_FILES := \
device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
- device/generic/goldfish/camera/media_profiles.xml:system/etc/media_profiles.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
- device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml
+ device/generic/goldfish/camera/media_profiles.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles.xml \
+ frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_audio.xml \
+ frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_telephony.xml \
+ frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs_google_video.xml \
+ device/generic/goldfish/camera/media_codecs.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_codecs.xml
+
+# minimal configuration for audio policy.
+PRODUCT_COPY_FILES += \
+ frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
+ frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
+
+# NFC:
+# Provide default libnfc-nci.conf file for devices that does not have one in
+# vendor/etc because aosp system image (of aosp_$arch products) is going to
+# be used as GSI.
+# May need to remove the following for newly launched devices in P since this
+# NFC configuration file should be in vendor/etc, instead of system/etc
+PRODUCT_COPY_FILES += \
+ device/generic/common/nfc/libnfc-nci.conf:system/etc/libnfc-nci.conf
# Adjust the Dalvik heap to be appropriate for a tablet.
$(call inherit-product-if-exists, frameworks/base/build/tablet-dalvik-heap.mk)
diff --git a/target/board/generic_mips/BoardConfig.mk b/target/board/generic_mips/BoardConfig.mk
deleted file mode 100644
index 523408b..0000000
--- a/target/board/generic_mips/BoardConfig.mk
+++ /dev/null
@@ -1,76 +0,0 @@
-#
-# Copyright (C) 2011 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# BoardConfig.mk
-#
-# Product-specific compile-time definitions.
-#
-
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
-
-TARGET_ARCH := mips
-ifeq (,$(TARGET_ARCH_VARIANT))
-TARGET_ARCH_VARIANT := mips32r2-fp
-endif
-TARGET_CPU_ABI := mips
-
-# Make TARGET_CPU_VARIANT the same as TARGET_ARCH_VARIANT
-TARGET_CPU_VARIANT := $(TARGET_ARCH_VARIANT)
-
-HAVE_HTC_AUDIO_DRIVER := true
-BOARD_USES_GENERIC_AUDIO := true
-
-# no hardware camera
-USE_CAMERA_STUB := true
-
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
- ifeq ($(WITH_DEXPREOPT),)
- WITH_DEXPREOPT := true
- WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := false
- endif
-endif
-
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
-
-# Build OpenGLES emulation guest and host libraries
-BUILD_EMULATOR_OPENGL := true
-BUILD_QEMU_IMAGES := true
-
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
-
-TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 2147483648 # 2 GB
-BOARD_USERDATAIMAGE_PARTITION_SIZE := 734003200
-TARGET_COPY_OUT_VENDOR := vendor
-# ~100 MB vendor image. Please adjust system image / vendor image sizes
-# when finalizing them.
-BOARD_VENDORIMAGE_PARTITION_SIZE := 100000000
-BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-DEVICE_MATRIX_FILE := device/generic/goldfish/compatibility_matrix.xml
-
-BOARD_SEPOLICY_DIRS += build/target/board/generic/sepolicy
-
-# Enable A/B update
-TARGET_NO_RECOVERY := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
diff --git a/target/board/generic_mips/README.txt b/target/board/generic_mips/README.txt
deleted file mode 100644
index b31a857..0000000
--- a/target/board/generic_mips/README.txt
+++ /dev/null
@@ -1,9 +0,0 @@
-The "generic_mips" product defines a MIPS based non-hardware-specific
-target without a kernel or bootloader.
-
-It can be used to build the entire user-level system, and
-will work with the emulator, though sound will not work
-(see the "emulator" product for that).
-
-It is not a product "base class"; no other products inherit
-from it or use it in any way.
diff --git a/target/board/generic_mips/device.mk b/target/board/generic_mips/device.mk
deleted file mode 100644
index a2633e1..0000000
--- a/target/board/generic_mips/device.mk
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for the product aspects that
-# are specific to the emulator.
-
-PRODUCT_PROPERTY_OVERRIDES := \
- ro.ril.hsxpa=1 \
- ro.ril.gprsclass=10
-
-PRODUCT_COPY_FILES := \
- device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
- device/generic/goldfish/camera/media_profiles.xml:system/etc/media_profiles.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
- device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml \
- hardware/libhardware_legacy/audio/audio_policy.conf:system/etc/audio_policy.conf
-
-PRODUCT_PACKAGES := \
- audio.primary.goldfish \
- power.goldfish \
- vibrator.goldfish
diff --git a/target/board/generic_mips/system.prop b/target/board/generic_mips/system.prop
deleted file mode 100644
index 973db2c..0000000
--- a/target/board/generic_mips/system.prop
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# system.prop for generic sdk
-#
-
-rild.libpath=/vendor/lib/libreference-ril.so
-rild.libargs=-d /dev/ttyS0
diff --git a/target/board/generic_mips64/BoardConfig.mk b/target/board/generic_mips64/BoardConfig.mk
deleted file mode 100644
index fa4c355..0000000
--- a/target/board/generic_mips64/BoardConfig.mk
+++ /dev/null
@@ -1,95 +0,0 @@
-#
-# Copyright (C) 2013 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# BoardConfig.mk
-#
-# Product-specific compile-time definitions.
-#
-
-# The generic product target doesn't have any hardware-specific pieces.
-TARGET_NO_BOOTLOADER := true
-TARGET_NO_KERNEL := true
-
-TARGET_ARCH := mips64
-ifeq (,$(TARGET_ARCH_VARIANT))
-TARGET_ARCH_VARIANT := mips64r6
-endif
-TARGET_CPU_ABI := mips64
-
-TARGET_2ND_ARCH := mips
-ifeq (,$(TARGET_2ND_ARCH_VARIANT))
-ifeq ($(TARGET_ARCH_VARIANT),mips64r6)
-# Imgtec builds use 32r6 arch variant with Imgtec-maintained prebuilts/ndk library:
-# TARGET_2ND_ARCH_VARIANT := mips32r6
-# Aosp builds lack full set of mips32r6 NDK prebuilts, so use 32r2 abi:
-TARGET_2ND_ARCH_VARIANT := mips32r2-fp
-else
-TARGET_2ND_ARCH_VARIANT := mips32r2-fp
-endif
-endif
-TARGET_2ND_CPU_ABI := mips
-
-# Make TARGET_XXX_CPU_VARIANT the same as TARGET_XXX_ARCH_VARIANT
-TARGET_CPU_VARIANT := $(TARGET_ARCH_VARIANT)
-TARGET_2ND_CPU_VARIANT := $(TARGET_2ND_ARCH_VARIANT)
-
-# The emulator (qemu) uses the Goldfish devices
-HAVE_HTC_AUDIO_DRIVER := true
-BOARD_USES_GENERIC_AUDIO := true
-
-# no hardware camera
-USE_CAMERA_STUB := true
-
-# Enable dex-preoptimization to speed up the first boot sequence
-# of an SDK AVD. Note that this operation only works on Linux for now
-ifeq ($(HOST_OS),linux)
- ifeq ($(WITH_DEXPREOPT),)
- WITH_DEXPREOPT := true
- WITH_DEXPREOPT_BOOT_IMG_AND_SYSTEM_SERVER_ONLY := false
- endif
-endif
-
-TARGET_USES_HWC2 := true
-NUM_FRAMEBUFFER_SURFACE_BUFFERS := 3
-
-# Build OpenGLES emulation guest and host libraries
-BUILD_EMULATOR_OPENGL := true
-BUILD_QEMU_IMAGES := true
-
-# Build and enable the OpenGL ES View renderer. When running on the emulator,
-# the GLES renderer disables itself if host GL acceleration isn't available.
-USE_OPENGL_RENDERER := true
-
-TARGET_USERIMAGES_USE_EXT4 := true
-BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1879048192 # 1.75 GB
-BOARD_USERDATAIMAGE_PARTITION_SIZE := 1610612736 # 1.5 GB, lots of space for running tests
-TARGET_COPY_OUT_VENDOR := vendor
-# ~100 MB vendor image. Please adjust system image / vendor image sizes
-# when finalizing them.
-BOARD_VENDORIMAGE_PARTITION_SIZE := 100000000
-BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4
-BOARD_FLASH_BLOCK_SIZE := 512
-TARGET_USERIMAGES_SPARSE_EXT_DISABLED := true
-DEVICE_MATRIX_FILE := device/generic/goldfish/compatibility_matrix.xml
-
-BOARD_SEPOLICY_DIRS += build/target/board/generic/sepolicy
-
-DEX_PREOPT_DEFAULT := nostripping
-
-# Enable A/B update
-TARGET_NO_RECOVERY := true
-BOARD_BUILD_SYSTEM_ROOT_IMAGE := true
-
-BUILD_BROKEN_DUP_RULES := false
diff --git a/target/board/generic_mips64/README.txt b/target/board/generic_mips64/README.txt
deleted file mode 100644
index cd4e05b..0000000
--- a/target/board/generic_mips64/README.txt
+++ /dev/null
@@ -1,8 +0,0 @@
-The "generic_mips64" product defines a MIPS64 based non-hardware-specific
-target without a kernel or bootloader.
-
-It can be used to build the entire user-level system, and
-will work with the emulator.
-
-It is not a product "base class"; no other products inherit
-from it or use it in any way.
diff --git a/target/board/generic_mips64/device.mk b/target/board/generic_mips64/device.mk
deleted file mode 100644
index 2ccbcbd..0000000
--- a/target/board/generic_mips64/device.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for the product aspects that
-# are specific to the emulator.
-
-PRODUCT_PROPERTY_OVERRIDES := \
- ro.ril.hsxpa=1 \
- ro.ril.gprsclass=10
-
-PRODUCT_COPY_FILES := \
- device/generic/goldfish/data/etc/apns-conf.xml:system/etc/apns-conf.xml \
- device/generic/goldfish/camera/media_profiles.xml:system/etc/media_profiles.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_audio.xml:system/etc/media_codecs_google_audio.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_telephony.xml:system/etc/media_codecs_google_telephony.xml \
- frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
- device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml \
- hardware/libhardware_legacy/audio/audio_policy.conf:system/etc/audio_policy.conf
-
-PRODUCT_PACKAGES := \
- audio.primary.goldfish \
- power.goldfish
diff --git a/target/board/generic_mips64/system.prop b/target/board/generic_mips64/system.prop
deleted file mode 100644
index 4da69c0..0000000
--- a/target/board/generic_mips64/system.prop
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# system.prop for generic mips64 sdk
-#
-
-rild.libpath=/vendor/lib64/libreference-ril.so
-rild.libargs=-d /dev/ttyS0
diff --git a/target/board/generic_x86/device.mk b/target/board/generic_x86/device.mk
index 24c39a5..7b6fa3c 100644
--- a/target/board/generic_x86/device.mk
+++ b/target/board/generic_x86/device.mk
@@ -29,6 +29,23 @@
frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml
+# minimal configuration for audio policy.
+PRODUCT_COPY_FILES += \
+ frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
+ frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
+
+# NFC:
+# Provide default libnfc-nci.conf file for devices that does not have one in
+# vendor/etc because aosp system image (of aosp_$arch products) is going to
+# be used as GSI.
+# May need to remove the following for newly launched devices in P since this
+# NFC configuration file should be in vendor/etc, instead of system/etc
+PRODUCT_COPY_FILES += \
+ device/generic/common/nfc/libnfc-nci.conf:system/etc/libnfc-nci.conf
+
PRODUCT_PACKAGES := \
audio.primary.goldfish \
vibrator.goldfish
diff --git a/target/board/generic_x86_64/device.mk b/target/board/generic_x86_64/device.mk
index 24c39a5..7b6fa3c 100755
--- a/target/board/generic_x86_64/device.mk
+++ b/target/board/generic_x86_64/device.mk
@@ -29,6 +29,23 @@
frameworks/av/media/libstagefright/data/media_codecs_google_video.xml:system/etc/media_codecs_google_video.xml \
device/generic/goldfish/camera/media_codecs.xml:system/etc/media_codecs.xml
+# minimal configuration for audio policy.
+PRODUCT_COPY_FILES += \
+ frameworks/av/services/audiopolicy/config/audio_policy_configuration_generic.xml:system/etc/audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/primary_audio_policy_configuration.xml:system/etc/primary_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/r_submix_audio_policy_configuration.xml:system/etc/r_submix_audio_policy_configuration.xml \
+ frameworks/av/services/audiopolicy/config/audio_policy_volumes.xml:system/etc/audio_policy_volumes.xml \
+ frameworks/av/services/audiopolicy/config/default_volume_tables.xml:system/etc/default_volume_tables.xml \
+
+# NFC:
+# Provide default libnfc-nci.conf file for devices that does not have one in
+# vendor/etc because aosp system image (of aosp_$arch products) is going to
+# be used as GSI.
+# May need to remove the following for newly launched devices in P since this
+# NFC configuration file should be in vendor/etc, instead of system/etc
+PRODUCT_COPY_FILES += \
+ device/generic/common/nfc/libnfc-nci.conf:system/etc/libnfc-nci.conf
+
PRODUCT_PACKAGES := \
audio.primary.goldfish \
vibrator.goldfish
diff --git a/target/product/AndroidProducts.mk b/target/product/AndroidProducts.mk
index daa9726..89b66d3 100644
--- a/target/product/AndroidProducts.mk
+++ b/target/product/AndroidProducts.mk
@@ -38,17 +38,13 @@
$(LOCAL_DIR)/full.mk \
$(LOCAL_DIR)/aosp_x86.mk \
$(LOCAL_DIR)/full_x86.mk \
- $(LOCAL_DIR)/aosp_mips.mk \
- $(LOCAL_DIR)/full_mips.mk \
$(LOCAL_DIR)/aosp_arm64.mk \
- $(LOCAL_DIR)/aosp_mips64.mk \
$(LOCAL_DIR)/aosp_x86_64.mk
else
PRODUCT_MAKEFILES := \
$(LOCAL_DIR)/core.mk \
$(LOCAL_DIR)/generic.mk \
$(LOCAL_DIR)/generic_x86.mk \
- $(LOCAL_DIR)/generic_mips.mk \
$(LOCAL_DIR)/aosp_arm.mk \
$(LOCAL_DIR)/aosp_arm_a.mk \
$(LOCAL_DIR)/aosp_arm_ab.mk \
@@ -58,24 +54,18 @@
$(LOCAL_DIR)/aosp_x86_ab.mk \
$(LOCAL_DIR)/aosp_x86_arm.mk \
$(LOCAL_DIR)/full_x86.mk \
- $(LOCAL_DIR)/aosp_mips.mk \
- $(LOCAL_DIR)/full_mips.mk \
$(LOCAL_DIR)/aosp_arm64.mk \
$(LOCAL_DIR)/aosp_arm64_a.mk \
$(LOCAL_DIR)/aosp_arm64_ab.mk \
- $(LOCAL_DIR)/aosp_mips64.mk \
$(LOCAL_DIR)/aosp_x86_64.mk \
$(LOCAL_DIR)/aosp_x86_64_a.mk \
$(LOCAL_DIR)/aosp_x86_64_ab.mk \
$(LOCAL_DIR)/sdk_phone_armv7.mk \
$(LOCAL_DIR)/sdk_phone_x86.mk \
- $(LOCAL_DIR)/sdk_phone_mips.mk \
$(LOCAL_DIR)/sdk_phone_arm64.mk \
$(LOCAL_DIR)/sdk_phone_x86_64.mk \
- $(LOCAL_DIR)/sdk_phone_mips64.mk \
$(LOCAL_DIR)/sdk.mk \
$(LOCAL_DIR)/sdk_x86.mk \
- $(LOCAL_DIR)/sdk_mips.mk \
$(LOCAL_DIR)/sdk_arm64.mk \
$(LOCAL_DIR)/sdk_x86_64.mk
endif
@@ -83,7 +73,5 @@
COMMON_LUNCH_CHOICES := \
aosp_arm-eng \
aosp_arm64-eng \
- aosp_mips-eng \
- aosp_mips64-eng \
aosp_x86-eng \
aosp_x86_64-eng
diff --git a/target/product/aosp_arm.mk b/target/product/aosp_arm.mk
index 820e392..c66f954 100644
--- a/target/product/aosp_arm.mk
+++ b/target/product/aosp_arm.mk
@@ -22,7 +22,7 @@
# see copy file rules in core/Makefile
PRODUCT_COPY_FILES += \
development/sys-img/advancedFeatures.ini.arm:advancedFeatures.ini \
- prebuilts/qemu-kernel/arm/3.18/kernel-qemu2:kernel-ranchu \
+ prebuilts/qemu-kernel/arm64/3.18/kernel-qemu2:kernel-ranchu-64 \
device/generic/goldfish/fstab.ranchu.arm:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.ranchu
include $(SRC_TARGET_DIR)/product/full.mk
diff --git a/target/product/aosp_arm64.mk b/target/product/aosp_arm64.mk
index 1231609..e7378d5 100644
--- a/target/product/aosp_arm64.mk
+++ b/target/product/aosp_arm64.mk
@@ -30,6 +30,14 @@
prebuilts/qemu-kernel/arm64/3.18/kernel-qemu2:kernel-ranchu \
device/generic/goldfish/fstab.ranchu.arm:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.ranchu
+# Copy different zygote settings for vendor.img to select by setting property
+# ro.zygote=zygote64_32 or ro.zygote=zygote32_64:
+# 1. 64-bit primary, 32-bit secondary OR
+# 2. 32-bit primary, 64-bit secondary
+# init.zygote64_32.rc is in the core_64_bit.mk below
+PRODUCT_COPY_FILES += \
+ system/core/rootdir/init.zygote32_64.rc:root/init.zygote32_64.rc
+
$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_arm64/device.mk)
diff --git a/target/product/aosp_mips.mk b/target/product/aosp_mips.mk
deleted file mode 100644
index 5ee6185..0000000
--- a/target/product/aosp_mips.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Copyright 2017 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-PRODUCT_PROPERTY_OVERRIDES += \
- rild.libpath=/vendor/lib/libreference-ril.so
-
-# Note: the following lines need to stay at the beginning so that it can
-# take priority and override the rules it inherit from other mk files
-# see copy file rules in core/Makefile
-PRODUCT_COPY_FILES += \
- development/sys-img/advancedFeatures.ini.arm:advancedFeatures.ini \
- prebuilts/qemu-kernel/mips/3.18/kernel-qemu2:kernel-ranchu \
- device/generic/goldfish/fstab.ranchu.mips:root/fstab.ranchu \
- device/generic/goldfish/fstab.ranchu.early.arm:root/fstab.ranchu.early
-
-include $(SRC_TARGET_DIR)/product/full_mips.mk
-
-PRODUCT_NAME := aosp_mips
diff --git a/target/product/aosp_mips64.mk b/target/product/aosp_mips64.mk
deleted file mode 100644
index 73d3731..0000000
--- a/target/product/aosp_mips64.mk
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# Copyright 2017 The Android Open-Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-PRODUCT_PROPERTY_OVERRIDES += \
- rild.libpath=/vendor/lib64/libreference-ril.so
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-# Note: the following lines need to stay at the beginning so that it can
-# take priority and override the rules it inherit from other mk files
-# see copy file rules in core/Makefile
-PRODUCT_COPY_FILES += \
- development/sys-img/advancedFeatures.ini.arm:advancedFeatures.ini \
- prebuilts/qemu-kernel/mips64/3.18/kernel-qemu2:kernel-ranchu \
- device/generic/goldfish/fstab.ranchu.mips:root/fstab.ranchu \
- device/generic/goldfish/fstab.ranchu.early.arm:root/fstab.ranchu.early
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips64/device.mk)
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-# Overrides
-PRODUCT_NAME := aosp_mips64
-PRODUCT_DEVICE := generic_mips64
-PRODUCT_BRAND := Android
-PRODUCT_MODEL := AOSP on MIPS64 Emulator
diff --git a/target/product/aosp_x86_64.mk b/target/product/aosp_x86_64.mk
index 086a76f..b1ed44e 100644
--- a/target/product/aosp_x86_64.mk
+++ b/target/product/aosp_x86_64.mk
@@ -27,6 +27,14 @@
device/generic/goldfish/data/etc/encryptionkey.img:encryptionkey.img \
prebuilts/qemu-kernel/x86_64/4.4/kernel-qemu2:kernel-ranchu
+# Copy different zygote settings for vendor.img to select by setting property
+# ro.zygote=zygote64_32 or ro.zygote=zygote32_64:
+# 1. 64-bit primary, 32-bit secondary OR
+# 2. 32-bit primary, 64-bit secondary
+# init.zygote64_32.rc is in the core_64_bit.mk below
+PRODUCT_COPY_FILES += \
+ system/core/rootdir/init.zygote32_64.rc:root/init.zygote32_64.rc
+
$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_x86_64/device.mk)
diff --git a/target/product/full_base.mk b/target/product/full_base.mk
index 7aac435..777d6c7 100644
--- a/target/product/full_base.mk
+++ b/target/product/full_base.mk
@@ -37,6 +37,20 @@
PhaseBeam \
PhotoTable
+# Bluetooth:
+# audio.a2dp.default is a system module. Generic system image includes
+# audio.a2dp.default to support A2DP if board has the capability.
+PRODUCT_PACKAGES += \
+ audio.a2dp.default
+
+# Net:
+# Vendors can use the platform-provided network configuration utilities (ip,
+# iptable, etc.) to configure the Linux networking stack, but these utilities
+# do not yet include a HIDL interface wrapper. This is a solution on
+# Android O.
+PRODUCT_PACKAGES += \
+ netutils-wrapper-1.0
+
# Additional settings used in all AOSP builds
PRODUCT_PROPERTY_OVERRIDES := \
ro.config.ringtone=Ring_Synth_04.ogg \
diff --git a/target/product/full_mips.mk b/target/product/full_mips.mk
deleted file mode 100644
index 61734b4..0000000
--- a/target/product/full_mips.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# mips build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/aosp_base_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/board/generic_mips/device.mk)
-
-include $(SRC_TARGET_DIR)/product/emulator.mk
-
-# Overrides
-PRODUCT_NAME := full_mips
-PRODUCT_DEVICE := generic_mips
-PRODUCT_BRAND := Android
-PRODUCT_MODEL := AOSP on MIPS Emulator
diff --git a/target/product/generic_mips.mk b/target/product/generic_mips.mk
deleted file mode 100644
index 7b53d04..0000000
--- a/target/product/generic_mips.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Copyright (C) 2007 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a generic phone product that isn't specialized for a specific device.
-# It includes the base Android platform.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/generic_no_telephony.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/telephony.mk)
-
-# Overrides
-PRODUCT_BRAND := generic_mips
-PRODUCT_DEVICE := generic_mips
-PRODUCT_NAME := generic_mips
diff --git a/target/product/sdk_mips.mk b/target/product/sdk_mips.mk
deleted file mode 100644
index 366994a..0000000
--- a/target/product/sdk_mips.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (C) 2014 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# Don't modify this file - It's just an alias!
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk_phone_mips.mk)
-
-PRODUCT_NAME := sdk_mips
diff --git a/target/product/sdk_phone_armv7.mk b/target/product/sdk_phone_armv7.mk
index 09e5c75..73c42c3 100644
--- a/target/product/sdk_phone_armv7.mk
+++ b/target/product/sdk_phone_armv7.mk
@@ -22,7 +22,7 @@
# see copy file rules in core/Makefile
PRODUCT_COPY_FILES += \
development/sys-img/advancedFeatures.ini.arm:advancedFeatures.ini \
- prebuilts/qemu-kernel/arm/3.18/kernel-qemu2:kernel-ranchu \
+ prebuilts/qemu-kernel/arm64/3.18/kernel-qemu2:kernel-ranchu-64 \
device/generic/goldfish/fstab.ranchu.arm:$(TARGET_COPY_OUT_VENDOR)/etc/fstab.ranchu
$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk_base.mk)
diff --git a/target/product/sdk_phone_mips.mk b/target/product/sdk_phone_mips.mk
deleted file mode 100644
index 1cc2fe4..0000000
--- a/target/product/sdk_phone_mips.mk
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# Copyright (C) 2012 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk_base.mk)
-
-# AOSP emulator images build the AOSP messaging app.
-# Google API images override with the Google API app.
-# See vendor/google/products/sdk_google_phone_*.mk
-PRODUCT_PACKAGES += \
- messaging
-
-# Overrides
-PRODUCT_BRAND := Android
-PRODUCT_NAME := sdk_phone_mips
-PRODUCT_DEVICE := generic_mips
-PRODUCT_MODEL := Android SDK for Mips
diff --git a/target/product/sdk_phone_mips64.mk b/target/product/sdk_phone_mips64.mk
deleted file mode 100644
index e45d71b..0000000
--- a/target/product/sdk_phone_mips64.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# Copyright (C) 2009 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-
-# This is a build configuration for a full-featured build of the
-# Open-Source part of the tree. It's geared toward a US-centric
-# build quite specifically for the emulator, and might not be
-# entirely appropriate to inherit from for on-device configurations.
-
-$(call inherit-product, $(SRC_TARGET_DIR)/product/core_64_bit.mk)
-$(call inherit-product, $(SRC_TARGET_DIR)/product/sdk_base.mk)
-
-# AOSP emulator images build the AOSP messaging app.
-# Google API images override with the Google API app.
-# See vendor/google/products/sdk_google_phone_*.mk
-PRODUCT_PACKAGES += \
- messaging
-
-# Overrides
-PRODUCT_BRAND := Android
-PRODUCT_NAME := sdk_phone_mips64
-PRODUCT_DEVICE := generic_mips64
-PRODUCT_MODEL := Android SDK built for mips64
diff --git a/tools/releasetools/add_img_to_target_files.py b/tools/releasetools/add_img_to_target_files.py
index a041157..8ac039f 100755
--- a/tools/releasetools/add_img_to_target_files.py
+++ b/tools/releasetools/add_img_to_target_files.py
@@ -415,9 +415,10 @@
assert found, 'failed to find %s' % (image_path,)
cmd.extend(split_args)
- p = common.Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
- p.communicate()
- assert p.returncode == 0, "avbtool make_vbmeta_image failed"
+ p = common.Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+ stdoutdata, _ = p.communicate()
+ assert p.returncode == 0, \
+ "avbtool make_vbmeta_image failed:\n{}".format(stdoutdata)
img.Write()
@@ -427,7 +428,7 @@
img = OutputFile(
output_zip, OPTIONS.input_tmp, "IMAGES", "partition-table.img")
bpt = OutputFile(
- output_zip, OPTIONS.input_tmp, "IMAGES", "partition-table.bpt")
+ output_zip, OPTIONS.input_tmp, "META", "partition-table.bpt")
# use BPTTOOL from environ, or "bpttool" if empty or not set.
bpttool = os.getenv("BPTTOOL") or "bpttool"
@@ -444,9 +445,10 @@
if args:
cmd.extend(shlex.split(args))
- p = common.Run(cmd, stdout=subprocess.PIPE)
- p.communicate()
- assert p.returncode == 0, "bpttool make_table failed"
+ p = common.Run(cmd, stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
+ stdoutdata, _ = p.communicate()
+ assert p.returncode == 0, \
+ "bpttool make_table failed:\n{}".format(stdoutdata)
img.Write()
bpt.Write()
@@ -485,18 +487,15 @@
img.Write()
-def AddRadioImagesForAbOta(output_zip, ab_partitions):
- """Adds the radio images needed for A/B OTA to the output file.
+def CheckAbOtaImages(output_zip, ab_partitions):
+ """Checks that all the listed A/B partitions have their images available.
- It parses the list of A/B partitions, looks for the missing ones from RADIO/,
- and copies them to IMAGES/ of the output file (or dir).
-
- It also ensures that on returning from the function all the listed A/B
- partitions must have their images available under IMAGES/.
+ The images need to be available under IMAGES/ or RADIO/, with the former takes
+ a priority.
Args:
output_zip: The output zip file (needs to be already open), or None to
- write images to OPTIONS.input_tmp/.
+ find images in OPTIONS.input_tmp/.
ab_partitions: The list of A/B partitions.
Raises:
@@ -504,27 +503,20 @@
"""
for partition in ab_partitions:
img_name = partition.strip() + ".img"
- prebuilt_path = os.path.join(OPTIONS.input_tmp, "IMAGES", img_name)
- if os.path.exists(prebuilt_path):
- print("%s already exists, no need to overwrite..." % (img_name,))
- continue
-
- img_radio_path = os.path.join(OPTIONS.input_tmp, "RADIO", img_name)
- if os.path.exists(img_radio_path):
- if output_zip:
- common.ZipWrite(output_zip, img_radio_path, "IMAGES/" + img_name)
- else:
- shutil.copy(img_radio_path, prebuilt_path)
- continue
# Assert that the image is present under IMAGES/ now.
if output_zip:
# Zip spec says: All slashes MUST be forward slashes.
- img_path = 'IMAGES/' + img_name
- assert img_path in output_zip.namelist(), "cannot find " + img_name
+ images_path = "IMAGES/" + img_name
+ radio_path = "RADIO/" + img_name
+ available = (images_path in output_zip.namelist() or
+ radio_path in output_zip.namelist())
else:
- img_path = os.path.join(OPTIONS.input_tmp, "IMAGES", img_name)
- assert os.path.exists(img_path), "cannot find " + img_name
+ images_path = os.path.join(OPTIONS.input_tmp, "IMAGES", img_name)
+ radio_path = os.path.join(OPTIONS.input_tmp, "RADIO", img_name)
+ available = os.path.exists(images_path) or os.path.exists(radio_path)
+
+ assert available, "Failed to find " + img_name
def AddCareMapTxtForAbOta(output_zip, ab_partitions, image_paths):
@@ -751,10 +743,9 @@
with open(ab_partitions_txt, 'r') as f:
ab_partitions = f.readlines()
- # For devices using A/B update, copy over images from RADIO/ to IMAGES/ and
- # make sure we have all the needed images ready under IMAGES/. All images
- # should have '.img' as extension.
- AddRadioImagesForAbOta(output_zip, ab_partitions)
+ # For devices using A/B update, make sure we have all the needed images
+ # ready under IMAGES/ or RADIO/.
+ CheckAbOtaImages(output_zip, ab_partitions)
# Generate care_map.txt for system and vendor partitions (if present), then
# write this file to target_files package.
diff --git a/tools/releasetools/build_image.py b/tools/releasetools/build_image.py
index 2e2e088..2406f4a 100755
--- a/tools/releasetools/build_image.py
+++ b/tools/releasetools/build_image.py
@@ -543,6 +543,8 @@
build_command.extend(["-L", prop_dict["mount_point"]])
if "extfs_inode_count" in prop_dict:
build_command.extend(["-i", prop_dict["extfs_inode_count"]])
+ if "extfs_rsv_pct" in prop_dict:
+ build_command.extend(["-M", prop_dict["extfs_rsv_pct"]])
if "flash_erase_block_size" in prop_dict:
build_command.extend(["-e", prop_dict["flash_erase_block_size"]])
if "flash_logical_block_size" in prop_dict:
@@ -684,8 +686,18 @@
d["timestamp"] = bp["ro.build.date.utc"]
def copy_prop(src_p, dest_p):
+ """Copy a property from the global dictionary.
+
+ Args:
+ src_p: The source property in the global dictionary.
+ dest_p: The destination property.
+ Returns:
+ True if property was found and copied, False otherwise.
+ """
if src_p in glob_dict:
d[dest_p] = str(glob_dict[src_p])
+ return True
+ return False
common_props = (
"extfs_sparse_flag",
@@ -718,7 +730,8 @@
copy_prop("system_fs_type", "fs_type")
copy_prop("system_headroom", "partition_headroom")
copy_prop("system_size", "partition_size")
- copy_prop("system_journal_size", "journal_size")
+ if not copy_prop("system_journal_size", "journal_size"):
+ d["journal_size"] = "0"
copy_prop("system_verity_block_device", "verity_block_device")
copy_prop("system_root_image", "system_root_image")
copy_prop("ramdisk_dir", "ramdisk_dir")
@@ -730,6 +743,8 @@
copy_prop("system_squashfs_disable_4k_align", "squashfs_disable_4k_align")
copy_prop("system_base_fs_file", "base_fs_file")
copy_prop("system_extfs_inode_count", "extfs_inode_count")
+ if not copy_prop("system_extfs_rsv_pct", "extfs_rsv_pct"):
+ d["extfs_rsv_pct"] = "0"
elif mount_point == "system_other":
# We inherit the selinux policies of /system since we contain some of its
# files.
@@ -742,13 +757,16 @@
copy_prop("fs_type", "fs_type")
copy_prop("system_fs_type", "fs_type")
copy_prop("system_size", "partition_size")
- copy_prop("system_journal_size", "journal_size")
+ if not copy_prop("system_journal_size", "journal_size"):
+ d["journal_size"] = "0"
copy_prop("system_verity_block_device", "verity_block_device")
copy_prop("system_squashfs_compressor", "squashfs_compressor")
copy_prop("system_squashfs_compressor_opt", "squashfs_compressor_opt")
copy_prop("system_squashfs_block_size", "squashfs_block_size")
copy_prop("system_base_fs_file", "base_fs_file")
copy_prop("system_extfs_inode_count", "extfs_inode_count")
+ if not copy_prop("system_extfs_rsv_pct", "extfs_rsv_pct"):
+ d["extfs_rsv_pct"] = "0"
elif mount_point == "data":
# Copy the generic fs type first, override with specific one if available.
copy_prop("fs_type", "fs_type")
@@ -767,7 +785,8 @@
copy_prop("avb_vendor_algorithm", "avb_algorithm")
copy_prop("vendor_fs_type", "fs_type")
copy_prop("vendor_size", "partition_size")
- copy_prop("vendor_journal_size", "journal_size")
+ if not copy_prop("vendor_journal_size", "journal_size"):
+ d["journal_size"] = "0"
copy_prop("vendor_verity_block_device", "verity_block_device")
copy_prop("ext4_share_dup_blocks", "ext4_share_dup_blocks")
copy_prop("vendor_squashfs_compressor", "squashfs_compressor")
@@ -776,6 +795,8 @@
copy_prop("vendor_squashfs_disable_4k_align", "squashfs_disable_4k_align")
copy_prop("vendor_base_fs_file", "base_fs_file")
copy_prop("vendor_extfs_inode_count", "extfs_inode_count")
+ if not copy_prop("vendor_extfs_rsv_pct", "extfs_rsv_pct"):
+ d["extfs_rsv_pct"] = "0"
elif mount_point == "product":
copy_prop("avb_product_hashtree_enable", "avb_hashtree_enable")
copy_prop("avb_product_add_hashtree_footer_args",
@@ -784,7 +805,8 @@
copy_prop("avb_product_algorithm", "avb_algorithm")
copy_prop("product_fs_type", "fs_type")
copy_prop("product_size", "partition_size")
- copy_prop("product_journal_size", "journal_size")
+ if not copy_prop("product_journal_size", "journal_size"):
+ d["journal_size"] = "0"
copy_prop("product_verity_block_device", "verity_block_device")
copy_prop("product_squashfs_compressor", "squashfs_compressor")
copy_prop("product_squashfs_compressor_opt", "squashfs_compressor_opt")
@@ -792,11 +814,16 @@
copy_prop("product_squashfs_disable_4k_align", "squashfs_disable_4k_align")
copy_prop("product_base_fs_file", "base_fs_file")
copy_prop("product_extfs_inode_count", "extfs_inode_count")
+ if not copy_prop("product_extfs_rsv_pct", "extfs_rsv_pct"):
+ d["extfs_rsv_pct"] = "0"
elif mount_point == "oem":
copy_prop("fs_type", "fs_type")
copy_prop("oem_size", "partition_size")
- copy_prop("oem_journal_size", "journal_size")
+ if not copy_prop("oem_journal_size", "journal_size"):
+ d["journal_size"] = "0"
copy_prop("oem_extfs_inode_count", "extfs_inode_count")
+ if not copy_prop("oem_extfs_rsv_pct", "extfs_rsv_pct"):
+ d["extfs_rsv_pct"] = "0"
d["partition_name"] = mount_point
return d
diff --git a/tools/releasetools/common.py b/tools/releasetools/common.py
index fd8a130..14d0ca4 100644
--- a/tools/releasetools/common.py
+++ b/tools/releasetools/common.py
@@ -966,17 +966,18 @@
COMMON_DOCSTRING = """
- -p (--path) <dir>
- Prepend <dir>/bin to the list of places to search for binaries
- run by this script, and expect to find jars in <dir>/framework.
+Global options
+
+ -p (--path) <dir>
+ Prepend <dir>/bin to the list of places to search for binaries run by this
+ script, and expect to find jars in <dir>/framework.
-s (--device_specific) <file>
- Path to the python module containing device-specific
- releasetools code.
+ Path to the Python module containing device-specific releasetools code.
- -x (--extra) <key=value>
- Add a key/value pair to the 'extras' dict, which device-specific
- extension code may look at.
+ -x (--extra) <key=value>
+ Add a key/value pair to the 'extras' dict, which device-specific extension
+ code may look at.
-v (--verbose)
Show command lines being executed.
diff --git a/tools/releasetools/ota_from_target_files.py b/tools/releasetools/ota_from_target_files.py
index fba9119..b6c26bf 100755
--- a/tools/releasetools/ota_from_target_files.py
+++ b/tools/releasetools/ota_from_target_files.py
@@ -15,39 +15,80 @@
# limitations under the License.
"""
-Given a target-files zipfile, produces an OTA package that installs
-that build. An incremental OTA is produced if -i is given, otherwise
-a full OTA is produced.
+Given a target-files zipfile, produces an OTA package that installs that build.
+An incremental OTA is produced if -i is given, otherwise a full OTA is produced.
-Usage: ota_from_target_files [flags] input_target_files output_ota_package
+Usage: ota_from_target_files [options] input_target_files output_ota_package
- -k (--package_key) <key> Key to use to sign the package (default is
- the value of default_system_dev_certificate from the input
- target-files's META/misc_info.txt, or
- "build/target/product/security/testkey" if that value is not
- specified).
+Common options that apply to both of non-A/B and A/B OTAs
+
+ --downgrade
+ Intentionally generate an incremental OTA that updates from a newer build
+ to an older one (based on timestamp comparison). "post-timestamp" will be
+ replaced by "ota-downgrade=yes" in the metadata file. A data wipe will
+ always be enforced, so "ota-wipe=yes" will also be included in the
+ metadata file. The update-binary in the source build will be used in the
+ OTA package, unless --binary flag is specified. Please also check the doc
+ for --override_timestamp below.
+
+ -i (--incremental_from) <file>
+ Generate an incremental OTA using the given target-files zip as the
+ starting build.
+
+ -k (--package_key) <key>
+ Key to use to sign the package (default is the value of
+ default_system_dev_certificate from the input target-files's
+ META/misc_info.txt, or "build/target/product/security/testkey" if that
+ value is not specified).
For incremental OTAs, the default value is based on the source
target-file, not the target build.
- -i (--incremental_from) <file>
- Generate an incremental OTA using the given target-files zip as
- the starting build.
+ --override_timestamp
+ Intentionally generate an incremental OTA that updates from a newer build
+ to an older one (based on timestamp comparison), by overriding the
+ timestamp in package metadata. This differs from --downgrade flag: we know
+ for sure this is NOT an actual downgrade case, but two builds are cut in a
+ reverse order. A legit use case is that we cut a new build C (after having
+ A and B), but want to enfore an update path of A -> C -> B. Specifying
+ --downgrade may not help since that would enforce a data wipe for C -> B
+ update. The value of "post-timestamp" will be set to the newer timestamp
+ plus one, so that the package can be pushed and applied.
- --full_radio
- When generating an incremental OTA, always include a full copy of
- radio image. This option is only meaningful when -i is specified,
- because a full radio is always included in a full OTA if applicable.
+ --wipe_user_data
+ Generate an OTA package that will wipe the user data partition when
+ installed.
+
+Non-A/B OTA specific options
+
+ -b (--binary) <file>
+ Use the given binary as the update-binary in the output package, instead
+ of the binary in the build's target_files. Use for development only.
+
+ --block
+ Generate a block-based OTA for non-A/B device. We have deprecated the
+ support for file-based OTA since O. Block-based OTA will be used by
+ default for all non-A/B devices. Keeping this flag here to not break
+ existing callers.
+
+ -e (--extra_script) <file>
+ Insert the contents of file at the end of the update script.
--full_bootloader
Similar to --full_radio. When generating an incremental OTA, always
include a full copy of bootloader image.
- --verify
- Remount and verify the checksums of the files written to the system and
- vendor (if used) partitions. Non-A/B incremental OTAs only.
+ --full_radio
+ When generating an incremental OTA, always include a full copy of radio
+ image. This option is only meaningful when -i is specified, because a full
+ radio is always included in a full OTA if applicable.
- -o (--oem_settings) <main_file[,additional_files...]>
+ --log_diff <file>
+ Generate a log file that shows the differences in the source and target
+ builds for an incremental package. This option is only meaningful when -i
+ is specified.
+
+ -o (--oem_settings) <main_file[,additional_files...]>
Comma seperated list of files used to specify the expected OEM-specific
properties on the OEM partition of the intended device. Multiple expected
values can be used by providing multiple files. Only the first dict will
@@ -55,42 +96,29 @@
OEM-specific properties.
--oem_no_mount
- For devices with OEM-specific properties but without an OEM partition,
- do not mount the OEM partition in the updater-script. This should be
- very rarely used, since it's expected to have a dedicated OEM partition
- for OEM-specific properties. Only meaningful when -o is specified.
+ For devices with OEM-specific properties but without an OEM partition, do
+ not mount the OEM partition in the updater-script. This should be very
+ rarely used, since it's expected to have a dedicated OEM partition for
+ OEM-specific properties. Only meaningful when -o is specified.
- --wipe_user_data
- Generate an OTA package that will wipe the user data partition
- when installed.
+ --stash_threshold <float>
+ Specify the threshold that will be used to compute the maximum allowed
+ stash size (defaults to 0.8).
- --downgrade
- Intentionally generate an incremental OTA that updates from a newer
- build to an older one (based on timestamp comparison). "post-timestamp"
- will be replaced by "ota-downgrade=yes" in the metadata file. A data
- wipe will always be enforced, so "ota-wipe=yes" will also be included in
- the metadata file. The update-binary in the source build will be used in
- the OTA package, unless --binary flag is specified. Please also check the
- doc for --override_timestamp below.
+ -t (--worker_threads) <int>
+ Specify the number of worker-threads that will be used when generating
+ patches for incremental updates (defaults to 3).
- --override_timestamp
- Intentionally generate an incremental OTA that updates from a newer
- build to an older one (based on timestamp comparison), by overriding the
- timestamp in package metadata. This differs from --downgrade flag: we
- know for sure this is NOT an actual downgrade case, but two builds are
- cut in a reverse order. A legit use case is that we cut a new build C
- (after having A and B), but want to enfore an update path of A -> C -> B.
- Specifying --downgrade may not help since that would enforce a data wipe
- for C -> B update. The value of "post-timestamp" will be set to the newer
- timestamp plus one, so that the package can be pushed and applied.
-
- -e (--extra_script) <file>
- Insert the contents of file at the end of the update script.
+ --verify
+ Verify the checksums of the updated system and vendor (if any) partitions.
+ Non-A/B incremental OTAs only.
-2 (--two_step)
- Generate a 'two-step' OTA package, where recovery is updated
- first, so that any changes made to the system partition are done
- using the new recovery (new kernel, etc.).
+ Generate a 'two-step' OTA package, where recovery is updated first, so
+ that any changes made to the system partition are done using the new
+ recovery (new kernel, etc.).
+
+A/B OTA specific options
--include_secondary
Additionally include the payload for secondary slot images (default:
@@ -110,30 +138,6 @@
Due to the special install procedure, the secondary payload will be always
generated as a full payload.
- --block
- Generate a block-based OTA for non-A/B device. We have deprecated the
- support for file-based OTA since O. Block-based OTA will be used by
- default for all non-A/B devices. Keeping this flag here to not break
- existing callers.
-
- -b (--binary) <file>
- Use the given binary as the update-binary in the output package,
- instead of the binary in the build's target_files. Use for
- development only.
-
- -t (--worker_threads) <int>
- Specifies the number of worker-threads that will be used when
- generating patches for incremental updates (defaults to 3).
-
- --stash_threshold <float>
- Specifies the threshold that will be used to compute the maximum
- allowed stash size (defaults to 0.8).
-
- --log_diff <file>
- Generate a log file that shows the differences in the source and target
- builds for an incremental package. This option is only meaningful when
- -i is specified.
-
--payload_signer <signer>
Specify the signer when signing the payload and metadata for A/B OTAs.
By default (i.e. without this flag), it calls 'openssl pkeyutl' to sign
diff --git a/tools/releasetools/test_add_img_to_target_files.py b/tools/releasetools/test_add_img_to_target_files.py
index e272ef2..a9c7f7c 100644
--- a/tools/releasetools/test_add_img_to_target_files.py
+++ b/tools/releasetools/test_add_img_to_target_files.py
@@ -22,8 +22,7 @@
import common
import test_utils
from add_img_to_target_files import (
- AddCareMapTxtForAbOta, AddPackRadioImages, AddRadioImagesForAbOta,
- GetCareMap)
+ AddCareMapTxtForAbOta, AddPackRadioImages, CheckAbOtaImages, GetCareMap)
from rangelib import RangeSet
@@ -55,49 +54,25 @@
os.mkdir(images_path)
return images, images_path
- def test_AddRadioImagesForAbOta_imageExists(self):
+ def test_CheckAbOtaImages_imageExistsUnderImages(self):
"""Tests the case with existing images under IMAGES/."""
- images, images_path = self._create_images(['aboot', 'xbl'], 'IMAGES')
- AddRadioImagesForAbOta(None, images)
+ images, _ = self._create_images(['aboot', 'xbl'], 'IMAGES')
+ CheckAbOtaImages(None, images)
- for image in images:
- self.assertTrue(
- os.path.exists(os.path.join(images_path, image + '.img')))
+ def test_CheckAbOtaImages_imageExistsUnderRadio(self):
+ """Tests the case with some image under RADIO/."""
+ images, _ = self._create_images(['system', 'vendor'], 'IMAGES')
+ radio_path = os.path.join(OPTIONS.input_tmp, 'RADIO')
+ if not os.path.exists(radio_path):
+ os.mkdir(radio_path)
+ with open(os.path.join(radio_path, 'modem.img'), 'wb') as image_fp:
+ image_fp.write('modem'.encode())
+ CheckAbOtaImages(None, images + ['modem'])
- def test_AddRadioImagesForAbOta_copyFromRadio(self):
- """Tests the case that copies images from RADIO/."""
- images, images_path = self._create_images(['aboot', 'xbl'], 'RADIO')
- AddRadioImagesForAbOta(None, images)
-
- for image in images:
- self.assertTrue(
- os.path.exists(os.path.join(images_path, image + '.img')))
-
- def test_AddRadioImagesForAbOta_copyFromRadio_zipOutput(self):
+ def test_CheckAbOtaImages_missingImages(self):
images, _ = self._create_images(['aboot', 'xbl'], 'RADIO')
-
- # Set up the output zip.
- output_file = common.MakeTempFile(suffix='.zip')
- with zipfile.ZipFile(output_file, 'w') as output_zip:
- AddRadioImagesForAbOta(output_zip, images)
-
- with zipfile.ZipFile(output_file, 'r') as verify_zip:
- for image in images:
- self.assertIn('IMAGES/' + image + '.img', verify_zip.namelist())
-
- def test_AddRadioImagesForAbOta_missingImages(self):
- images, _ = self._create_images(['aboot', 'xbl'], 'RADIO')
- self.assertRaises(AssertionError, AddRadioImagesForAbOta, None,
- images + ['baz'])
-
- def test_AddRadioImagesForAbOta_missingImages_zipOutput(self):
- images, _ = self._create_images(['aboot', 'xbl'], 'RADIO')
-
- # Set up the output zip.
- output_file = common.MakeTempFile(suffix='.zip')
- with zipfile.ZipFile(output_file, 'w') as output_zip:
- self.assertRaises(AssertionError, AddRadioImagesForAbOta, output_zip,
- images + ['baz'])
+ self.assertRaises(
+ AssertionError, CheckAbOtaImages, None, images + ['baz'])
def test_AddPackRadioImages(self):
images, images_path = self._create_images(['foo', 'bar'], 'RADIO')
diff --git a/tools/releasetools/test_ota_from_target_files.py b/tools/releasetools/test_ota_from_target_files.py
index d7cace8..0eb24b5 100644
--- a/tools/releasetools/test_ota_from_target_files.py
+++ b/tools/releasetools/test_ota_from_target_files.py
@@ -50,17 +50,25 @@
"POSTINSTALL_OPTIONAL_system=true",
]))
+ ab_partitions = [
+ ('IMAGES', 'boot'),
+ ('IMAGES', 'system'),
+ ('IMAGES', 'vendor'),
+ ('RADIO', 'bootloader'),
+ ('RADIO', 'modem'),
+ ]
# META/ab_partitions.txt
- ab_partitions = ['boot', 'system', 'vendor']
target_files_zip.writestr(
'META/ab_partitions.txt',
- '\n'.join(ab_partitions))
+ '\n'.join([partition[1] for partition in ab_partitions]))
# Create dummy images for each of them.
- for partition in ab_partitions:
- target_files_zip.writestr('IMAGES/' + partition + '.img',
- os.urandom(len(partition)))
+ for path, partition in ab_partitions:
+ target_files_zip.writestr(
+ '{}/{}.img'.format(path, partition),
+ os.urandom(len(partition)))
+ # system_other shouldn't appear in META/ab_partitions.txt.
if secondary:
target_files_zip.writestr('IMAGES/system_other.img',
os.urandom(len("system_other")))