diff --git a/core/Makefile b/core/Makefile
index 575ab36..dc06051 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -1373,12 +1373,9 @@
 endif
 
 INTERNAL_USERIMAGES_DEPS := \
-    $(BLK_ALLOC_TO_BASE_FS) \
-    $(E2FSCK) \
+    $(BUILD_IMAGE) \
     $(MKE2FS_CONF) \
-    $(MKEXTUSERIMG) \
-    $(SIMG2IMG) \
-    $(TUNE2FS)
+    $(MKEXTUSERIMG)
 
 ifeq ($(TARGET_USERIMAGES_USE_F2FS),true)
 INTERNAL_USERIMAGES_DEPS += $(MKF2FSUSERIMG)
@@ -1411,9 +1408,6 @@
   $(error vboot 1.0 doesn't support logical partition)
 endif
 
-# TODO(b/80195851): Should not define BOARD_AVB_SYSTEM_KEY_PATH without
-# BOARD_AVB_SYSTEM_DETACHED_VBMETA.
-
 endif # PRODUCT_USE_DYNAMIC_PARTITIONS
 
 # $(1): the path of the output dictionary file
@@ -2298,16 +2292,17 @@
   $(call generate-image-prop-dictionary, $(systemimage_intermediates)/system_image_info.txt,system, \
       skip_fsck=true)
   PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-      build/make/tools/releasetools/build_image.py \
-      $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \
-      || ( mkdir -p $${DIST_DIR}; cp $(INSTALLED_FILES_FILE) $${DIST_DIR}/installed-files-rescued.txt; \
-           exit 1 )
+      $(BUILD_IMAGE) \
+          $(TARGET_OUT) $(systemimage_intermediates)/system_image_info.txt $(1) $(TARGET_OUT) \
+          || ( mkdir -p $${DIST_DIR}; \
+               cp $(INSTALLED_FILES_FILE) $${DIST_DIR}/installed-files-rescued.txt; \
+               exit 1 )
 endef
 
 ifeq ($(BOARD_AVB_ENABLE),true)
 $(BUILT_SYSTEMIMAGE): $(BOARD_AVB_SYSTEM_KEY_PATH)
 endif
-$(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE) $(BUILD_IMAGE_SRCS)
+$(BUILT_SYSTEMIMAGE): $(FULL_SYSTEMIMAGE_DEPS) $(INSTALLED_FILES_FILE)
 	$(call build-systemimage-target,$@)
 
 INSTALLED_SYSTEMIMAGE_TARGET := $(PRODUCT_OUT)/system.img
@@ -2488,17 +2483,17 @@
   @mkdir -p $(userdataimage_intermediates) && rm -rf $(userdataimage_intermediates)/userdata_image_info.txt
   $(call generate-image-prop-dictionary, $(userdataimage_intermediates)/userdata_image_info.txt,userdata,skip_fsck=true)
   PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-      build/make/tools/releasetools/build_image.py \
-      $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt $(INSTALLED_USERDATAIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE))
+      $(BUILD_IMAGE) \
+          $(TARGET_OUT_DATA) $(userdataimage_intermediates)/userdata_image_info.txt \
+          $(INSTALLED_USERDATAIMAGE_TARGET) $(TARGET_OUT)
+  $(call assert-max-image-size,$(INSTALLED_USERDATAIMAGE_TARGET),$(BOARD_USERDATAIMAGE_PARTITION_SIZE))
 endef
 
 # We just build this directly to the install location.
 INSTALLED_USERDATAIMAGE_TARGET := $(BUILT_USERDATAIMAGE_TARGET)
 INSTALLED_USERDATAIMAGE_TARGET_DEPS := \
     $(INTERNAL_USERIMAGES_DEPS) \
-    $(INTERNAL_USERDATAIMAGE_FILES) \
-    $(BUILD_IMAGE_SRCS)
+    $(INTERNAL_USERDATAIMAGE_FILES)
 $(INSTALLED_USERDATAIMAGE_TARGET): $(INSTALLED_USERDATAIMAGE_TARGET_DEPS)
 	$(build-userdataimage-target)
 
@@ -2571,14 +2566,15 @@
   @mkdir -p $(cacheimage_intermediates) && rm -rf $(cacheimage_intermediates)/cache_image_info.txt
   $(call generate-image-prop-dictionary, $(cacheimage_intermediates)/cache_image_info.txt,cache,skip_fsck=true)
   PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-      build/make/tools/releasetools/build_image.py \
-      $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt $(INSTALLED_CACHEIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE))
+      $(BUILD_IMAGE) \
+          $(TARGET_OUT_CACHE) $(cacheimage_intermediates)/cache_image_info.txt \
+          $(INSTALLED_CACHEIMAGE_TARGET) $(TARGET_OUT)
+  $(call assert-max-image-size,$(INSTALLED_CACHEIMAGE_TARGET),$(BOARD_CACHEIMAGE_PARTITION_SIZE))
 endef
 
 # We just build this directly to the install location.
 INSTALLED_CACHEIMAGE_TARGET := $(BUILT_CACHEIMAGE_TARGET)
-$(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES) $(BUILD_IMAGE_SRCS)
+$(INSTALLED_CACHEIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_CACHEIMAGE_FILES)
 	$(build-cacheimage-target)
 
 .PHONY: cacheimage-nodeps
@@ -2642,9 +2638,10 @@
   @mkdir -p $(systemotherimage_intermediates) && rm -rf $(systemotherimage_intermediates)/system_other_image_info.txt
   $(call generate-image-prop-dictionary, $(systemotherimage_intermediates)/system_other_image_info.txt,system,skip_fsck=true)
   PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-      build/make/tools/releasetools/build_image.py \
-      $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
+      $(BUILD_IMAGE) \
+          $(TARGET_OUT_SYSTEM_OTHER) $(systemotherimage_intermediates)/system_other_image_info.txt \
+          $(INSTALLED_SYSTEMOTHERIMAGE_TARGET) $(TARGET_OUT)
+  $(call assert-max-image-size,$(INSTALLED_SYSTEMOTHERIMAGE_TARGET),$(BOARD_SYSTEMIMAGE_PARTITION_SIZE))
 endef
 
 # We just build this directly to the install location.
@@ -2795,9 +2792,10 @@
   @mkdir -p $(vendorimage_intermediates) && rm -rf $(vendorimage_intermediates)/vendor_image_info.txt
   $(call generate-image-prop-dictionary, $(vendorimage_intermediates)/vendor_image_info.txt,vendor,skip_fsck=true)
   PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-      build/make/tools/releasetools/build_image.py \
-      $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),$(BOARD_VENDORIMAGE_PARTITION_SIZE))
+      $(BUILD_IMAGE) \
+          $(TARGET_OUT_VENDOR) $(vendorimage_intermediates)/vendor_image_info.txt \
+          $(INSTALLED_VENDORIMAGE_TARGET) $(TARGET_OUT)
+  $(call assert-max-image-size,$(INSTALLED_VENDORIMAGE_TARGET),$(BOARD_VENDORIMAGE_PARTITION_SIZE))
 endef
 
 # We just build this directly to the install location.
@@ -2805,7 +2803,10 @@
 ifdef BUILT_VENDOR_MANIFEST
 $(INSTALLED_VENDORIMAGE_TARGET): $(BUILT_ASSEMBLED_VENDOR_MANIFEST)
 endif
-$(INSTALLED_VENDORIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_VENDORIMAGE_FILES) $(INSTALLED_FILES_FILE_VENDOR) $(BUILD_IMAGE_SRCS)
+$(INSTALLED_VENDORIMAGE_TARGET): \
+    $(INTERNAL_USERIMAGES_DEPS) \
+    $(INTERNAL_VENDORIMAGE_FILES) \
+    $(INSTALLED_FILES_FILE_VENDOR)
 	$(build-vendorimage-target)
 
 .PHONY: vendorimage-nodeps vnod
@@ -2850,14 +2851,18 @@
   @mkdir -p $(productimage_intermediates) && rm -rf $(productimage_intermediates)/product_image_info.txt
   $(call generate-image-prop-dictionary, $(productimage_intermediates)/product_image_info.txt,product,skip_fsck=true)
   PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-      ./build/tools/releasetools/build_image.py \
-      $(TARGET_OUT_PRODUCT) $(productimage_intermediates)/product_image_info.txt $(INSTALLED_PRODUCTIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_PRODUCTIMAGE_TARGET),$(BOARD_PRODUCTIMAGE_PARTITION_SIZE))
+      $(BUILD_IMAGE) \
+          $(TARGET_OUT_PRODUCT) $(productimage_intermediates)/product_image_info.txt \
+          $(INSTALLED_PRODUCTIMAGE_TARGET) $(TARGET_OUT)
+  $(call assert-max-image-size,$(INSTALLED_PRODUCTIMAGE_TARGET),$(BOARD_PRODUCTIMAGE_PARTITION_SIZE))
 endef
 
 # We just build this directly to the install location.
 INSTALLED_PRODUCTIMAGE_TARGET := $(BUILT_PRODUCTIMAGE_TARGET)
-$(INSTALLED_PRODUCTIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_PRODUCTIMAGE_FILES) $(INSTALLED_FILES_FILE_PRODUCT) $(BUILD_IMAGE_SRCS)
+$(INSTALLED_PRODUCTIMAGE_TARGET): \
+    $(INTERNAL_USERIMAGES_DEPS) \
+    $(INTERNAL_PRODUCTIMAGE_FILES) \
+    $(INSTALLED_FILES_FILE_PRODUCT)
 	$(build-productimage-target)
 
 .PHONY: productimage-nodeps pnod
@@ -2948,14 +2953,20 @@
   @mkdir -p $(system_extimage_intermediates) && rm -rf $(system_extimage_intermediates)/system_ext_image_info.txt
   $(call generate-image-prop-dictionary, $(system_extimage_intermediates)/system_ext_image_info.txt,system_ext, skip_fsck=true)
   PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-      ./build/tools/releasetools/build_image.py \
-      $(TARGET_OUT_SYSTEM_EXT) $(system_extimage_intermediates)/system_ext_image_info.txt $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_SYSTEM_EXTIMAGE_TARGET),$(BOARD_SYSTEM_EXTIMAGE_PARTITION_SIZE))
+      $(BUILD_IMAGE) \
+          $(TARGET_OUT_SYSTEM_EXT) \
+          $(system_extimage_intermediates)/system_ext_image_info.txt \
+          $(INSTALLED_SYSTEM_EXTIMAGE_TARGET) \
+          $(TARGET_OUT)
+  $(call assert-max-image-size,$(INSTALLED_PRODUCT_SERVICESIMAGE_TARGET),$(BOARD_PRODUCT_SERVICESIMAGE_PARTITION_SIZE))
 endef
 
 # We just build this directly to the install location.
 INSTALLED_SYSTEM_EXTIMAGE_TARGET := $(BUILT_SYSTEM_EXTIMAGE_TARGET)
-$(INSTALLED_SYSTEM_EXTIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_SYSTEM_EXTIMAGE_FILES) $(INSTALLED_FILES_FILE_SYSTEM_EXT) $(BUILD_IMAGE_SRCS)
+$(INSTALLED_SYSTEM_EXTIMAGE_TARGET): \
+    $(INTERNAL_USERIMAGES_DEPS) \
+    $(INTERNAL_SYSTEM_EXTIMAGE_FILES) \
+    $(INSTALLED_FILES_FILE_SYSTEM_EXT)
 	$(build-system_extimage-target)
 
 .PHONY: systemextimage-nodeps senod
@@ -2999,14 +3010,18 @@
   @mkdir -p $(odmimage_intermediates) && rm -rf $(odmimage_intermediates)/odm_image_info.txt
   $(call generate-userimage-prop-dictionary, $(odmimage_intermediates)/odm_image_info.txt, skip_fsck=true)
   PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-      ./build/tools/releasetools/build_image.py \
-      $(TARGET_OUT_ODM) $(odmimage_intermediates)/odm_image_info.txt $(INSTALLED_ODMIMAGE_TARGET) $(TARGET_OUT)
-  $(hide) $(call assert-max-image-size,$(INSTALLED_ODMIMAGE_TARGET),$(BOARD_ODMIMAGE_PARTITION_SIZE))
+      $(BUILD_IMAGE) \
+          $(TARGET_OUT_ODM) $(odmimage_intermediates)/odm_image_info.txt \
+          $(INSTALLED_ODMIMAGE_TARGET) $(TARGET_OUT)
+  $(call assert-max-image-size,$(INSTALLED_ODMIMAGE_TARGET),$(BOARD_ODMIMAGE_PARTITION_SIZE))
 endef
 
 # We just build this directly to the install location.
 INSTALLED_ODMIMAGE_TARGET := $(BUILT_ODMIMAGE_TARGET)
-$(INSTALLED_ODMIMAGE_TARGET): $(INTERNAL_USERIMAGES_DEPS) $(INTERNAL_ODMIMAGE_FILES) $(INSTALLED_FILES_FILE_ODM) $(BUILD_IMAGE_SRCS)
+$(INSTALLED_ODMIMAGE_TARGET): \
+    $(INTERNAL_USERIMAGES_DEPS) \
+    $(INTERNAL_ODMIMAGE_FILES) \
+    $(INSTALLED_FILES_FILE_ODM)
 	$(build-odmimage-target)
 
 .PHONY: odmimage-nodeps onod
@@ -3580,6 +3595,8 @@
   brillo_update_payload \
   brotli \
   bsdiff \
+  build_image \
+  build_super_image \
   build_verity_metadata \
   build_verity_tree \
   care_map_generator \
@@ -3598,6 +3615,7 @@
   lpunpack \
   make_f2fs \
   minigzip \
+  mk_combined_img \
   mkbootfs \
   mkbootimg \
   mke2fs \
@@ -3607,6 +3625,7 @@
   mksquashfsimage.sh \
   mkuserimg_mke2fs \
   sefcontext_compile \
+  sgdisk \
   shflags \
   signapk \
   simg2img \
@@ -3685,6 +3704,139 @@
 endif # build_otatools_package
 
 # -----------------------------------------------------------------
+#  misc_info.txt
+
+INSTALLED_MISC_INFO_TARGET := $(PRODUCT_OUT)/misc_info.txt
+
+ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),)
+# default to common dir for device vendor
+tool_extensions := $(TARGET_DEVICE_DIR)/../common
+else
+tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS)
+endif
+.KATI_READONLY := tool_extensions
+
+$(INSTALLED_MISC_INFO_TARGET):
+	rm -f $@
+	$(call pretty,"Target misc_info.txt: $@")
+	$(hide) echo "recovery_api_version=$(RECOVERY_API_VERSION)" >> $@
+	$(hide) echo "fstab_version=$(RECOVERY_FSTAB_VERSION)" >> $@
+ifdef BOARD_FLASH_BLOCK_SIZE
+	$(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $@
+endif
+ifdef BOARD_BOOTIMAGE_PARTITION_SIZE
+	$(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $@
+endif
+ifeq ($(INSTALLED_BOOTIMAGE_TARGET),)
+	$(hide) echo "no_boot=true" >> $@
+endif
+ifeq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
+	$(hide) echo "no_recovery=true" >> $@
+endif
+ifdef BOARD_INCLUDE_RECOVERY_DTBO
+	$(hide) echo "include_recovery_dtbo=true" >> $@
+endif
+ifdef BOARD_INCLUDE_RECOVERY_ACPIO
+	$(hide) echo "include_recovery_acpio=true" >> $@
+endif
+ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE
+	$(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $@
+endif
+ifdef TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS
+	@# TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS can be empty to indicate that nothing but defaults should be used.
+	$(hide) echo "recovery_mount_options=$(TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $@
+else
+	$(hide) echo "recovery_mount_options=$(DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $@
+endif
+	$(hide) echo "tool_extensions=$(tool_extensions)" >> $@
+	$(hide) echo "default_system_dev_certificate=$(DEFAULT_SYSTEM_DEV_CERTIFICATE)" >> $@
+ifdef PRODUCT_EXTRA_RECOVERY_KEYS
+	$(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $@
+endif
+	$(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $@
+	$(hide) echo 'mkbootimg_version_args=$(INTERNAL_MKBOOTIMG_VERSION_ARGS)' >> $@
+	$(hide) echo "multistage_support=1" >> $@
+	$(hide) echo "blockimgdiff_versions=3,4" >> $@
+ifeq ($(PRODUCT_BUILD_GENERIC_OTA_PACKAGE),true)
+	$(hide) echo "build_generic_ota_package=true" >> $@
+endif
+ifneq ($(OEM_THUMBPRINT_PROPERTIES),)
+	# OTA scripts are only interested in fingerprint related properties
+	$(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $@
+endif
+ifneq (,$(filter address, $(SANITIZE_TARGET)))
+	# We need to create userdata.img with real data because the instrumented libraries are in userdata.img.
+	$(hide) echo "userdata_img_with_data=true" >> $@
+endif
+ifeq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true)
+	$(hide) echo "full_recovery_image=true" >> $@
+endif
+ifeq ($(BOARD_AVB_ENABLE),true)
+	$(hide) echo "avb_enable=true" >> $@
+	$(hide) echo "avb_vbmeta_key_path=$(BOARD_AVB_KEY_PATH)" >> $@
+	$(hide) echo "avb_vbmeta_algorithm=$(BOARD_AVB_ALGORITHM)" >> $@
+	$(hide) echo "avb_vbmeta_args=$(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS)" >> $@
+	$(hide) echo "avb_boot_add_hash_footer_args=$(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS)" >> $@
+ifdef BOARD_AVB_BOOT_KEY_PATH
+	$(hide) echo "avb_boot_key_path=$(BOARD_AVB_BOOT_KEY_PATH)" >> $@
+	$(hide) echo "avb_boot_algorithm=$(BOARD_AVB_BOOT_ALGORITHM)" >> $@
+	$(hide) echo "avb_boot_rollback_index_location=$(BOARD_AVB_BOOT_ROLLBACK_INDEX_LOCATION)" >> $@
+endif # BOARD_AVB_BOOT_KEY_PATH
+	$(hide) echo "avb_recovery_add_hash_footer_args=$(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS)" >> $@
+ifdef BOARD_AVB_RECOVERY_KEY_PATH
+	$(hide) echo "avb_recovery_key_path=$(BOARD_AVB_RECOVERY_KEY_PATH)" >> $@
+	$(hide) echo "avb_recovery_algorithm=$(BOARD_AVB_RECOVERY_ALGORITHM)" >> $@
+	$(hide) echo "avb_recovery_rollback_index_location=$(BOARD_AVB_RECOVERY_ROLLBACK_INDEX_LOCATION)" >> $@
+endif # BOARD_AVB_RECOVERY_KEY_PATH
+ifneq (,$(strip $(BOARD_AVB_VBMETA_SYSTEM)))
+	$(hide) echo "avb_vbmeta_system=$(BOARD_AVB_VBMETA_SYSTEM)" >> $@
+	$(hide) echo "avb_vbmeta_system_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $@
+	$(hide) echo "avb_vbmeta_system_key_path=$(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH)" >> $@
+	$(hide) echo "avb_vbmeta_system_algorithm=$(BOARD_AVB_VBMETA_SYSTEM_ALGORITHM)" >> $@
+	$(hide) echo "avb_vbmeta_system_rollback_index_location=$(BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $@
+endif # BOARD_AVB_VBMETA_SYSTEM
+ifneq (,$(strip $(BOARD_AVB_VBMETA_VENDOR)))
+	$(hide) echo "avb_vbmeta_vendor=$(BOARD_AVB_VBMETA_VENDOR)" >> $@
+	$(hide) echo "avb_vbmeta_vendor_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $@
+	$(hide) echo "avb_vbmeta_vendor_key_path=$(BOARD_AVB_VBMETA_VENDOR_KEY_PATH)" >> $@
+	$(hide) echo "avb_vbmeta_vendor_algorithm=$(BOARD_AVB_VBMETA_VENDOR_ALGORITHM)" >> $@
+	$(hide) echo "avb_vbmeta_vendor_rollback_index_location=$(BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $@
+endif # BOARD_AVB_VBMETA_VENDOR_KEY_PATH
+endif # BOARD_AVB_ENABLE
+ifdef BOARD_BPT_INPUT_FILES
+	$(hide) echo "board_bpt_enable=true" >> $@
+	$(hide) echo "board_bpt_make_table_args=$(BOARD_BPT_MAKE_TABLE_ARGS)" >> $@
+	$(hide) echo "board_bpt_input_files=$(BOARD_BPT_INPUT_FILES)" >> $@
+endif
+ifdef BOARD_BPT_DISK_SIZE
+	$(hide) echo "board_bpt_disk_size=$(BOARD_BPT_DISK_SIZE)" >> $@
+endif
+	$(call generate-userimage-prop-dictionary, $@)
+ifeq ($(AB_OTA_UPDATER),true)
+	@# Include the build type in META/misc_info.txt so the server can easily differentiate production builds.
+	$(hide) echo "build_type=$(TARGET_BUILD_VARIANT)" >> $@
+	$(hide) echo "ab_update=true" >> $@
+endif
+ifdef BOARD_PREBUILT_DTBOIMAGE
+	$(hide) echo "has_dtbo=true" >> $@
+ifeq ($(BOARD_AVB_ENABLE),true)
+	$(hide) echo "dtbo_size=$(BOARD_DTBOIMG_PARTITION_SIZE)" >> $@
+	$(hide) echo "avb_dtbo_add_hash_footer_args=$(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS)" >> $@
+ifdef BOARD_AVB_DTBO_KEY_PATH
+	$(hide) echo "avb_dtbo_key_path=$(BOARD_AVB_DTBO_KEY_PATH)" >> $@
+	$(hide) echo "avb_dtbo_algorithm=$(BOARD_AVB_DTBO_ALGORITHM)" >> $@
+	$(hide) echo "avb_dtbo_rollback_index_location=$(BOARD_AVB_DTBO_ROLLBACK_INDEX_LOCATION)" >> $@
+endif # BOARD_AVB_DTBO_KEY_PATH
+endif # BOARD_AVB_ENABLE
+endif # BOARD_PREBUILT_DTBOIMAGE
+	$(call dump-dynamic-partitions-info,$@)
+
+.PHONY: misc_info
+misc_info: $(INSTALLED_MISC_INFO_TARGET)
+
+droidcore: $(INSTALLED_MISC_INFO_TARGET)
+
+# -----------------------------------------------------------------
 # A zip of the directories that map to the target filesystem.
 # This zip can be used to create an OTA package or filesystem image
 # as a post-build step.
@@ -3721,17 +3873,7 @@
 
 $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_OTA_TOOLS := $(built_ota_tools)
 
-$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_API_VERSION := $(RECOVERY_API_VERSION)
-$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_RECOVERY_FSTAB_VERSION := $(RECOVERY_FSTAB_VERSION)
-
-ifeq ($(TARGET_RELEASETOOLS_EXTENSIONS),)
-# default to common dir for device vendor
-tool_extensions := $(TARGET_DEVICE_DIR)/../common
-else
-tool_extensions := $(TARGET_RELEASETOOLS_EXTENSIONS)
-endif
 tool_extension := $(wildcard $(tool_extensions)/releasetools.py)
-$(BUILT_TARGET_FILES_PACKAGE): PRIVATE_TOOL_EXTENSIONS := $(tool_extensions)
 $(BUILT_TARGET_FILES_PACKAGE): PRIVATE_TOOL_EXTENSION := $(tool_extension)
 
 ifeq ($(AB_OTA_UPDATER),true)
@@ -3801,6 +3943,11 @@
 $(BUILT_TARGET_FILES_PACKAGE): $(FULL_SYSTEMIMAGE_DEPS)
 endif
 
+ifeq ($(BUILD_QEMU_IMAGES),true)
+MK_VBMETA_BOOT_KERNEL_CMDLINE_SH := device/generic/goldfish/tools/mk_vbmeta_boot_params.sh
+$(BUILT_TARGET_FILES_PACKAGE): $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH)
+endif
+
 # Depending on the various images guarantees that the underlying
 # directories are up-to-date.
 $(BUILT_TARGET_FILES_PACKAGE): \
@@ -3831,6 +3978,7 @@
 	    $(PRODUCT_ODM_BASE_FS_PATH) \
 	    $(LPMAKE) \
 	    $(SELINUX_FC) \
+	    $(INSTALLED_MISC_INFO_TARGET) \
 	    $(APKCERTS_FILE) \
 	    $(SOONG_APEX_KEYS_FILE) \
 	    $(SOONG_ZIP) \
@@ -3972,51 +4120,7 @@
 endif
 	$(hide) echo "$(PRODUCT_OTA_PUBLIC_KEYS)" > $(zip_root)/META/otakeys.txt
 	$(hide) cp $(SELINUX_FC) $(zip_root)/META/file_contexts.bin
-	$(hide) echo "recovery_api_version=$(PRIVATE_RECOVERY_API_VERSION)" > $(zip_root)/META/misc_info.txt
-	$(hide) echo "fstab_version=$(PRIVATE_RECOVERY_FSTAB_VERSION)" >> $(zip_root)/META/misc_info.txt
-ifdef BOARD_FLASH_BLOCK_SIZE
-	$(hide) echo "blocksize=$(BOARD_FLASH_BLOCK_SIZE)" >> $(zip_root)/META/misc_info.txt
-endif
-ifdef BOARD_BOOTIMAGE_PARTITION_SIZE
-	$(hide) echo "boot_size=$(BOARD_BOOTIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
-endif
-ifeq ($(INSTALLED_BOOTIMAGE_TARGET),)
-	$(hide) echo "no_boot=true" >> $(zip_root)/META/misc_info.txt
-endif
-ifeq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
-	$(hide) echo "no_recovery=true" >> $(zip_root)/META/misc_info.txt
-endif
-ifdef BOARD_INCLUDE_RECOVERY_DTBO
-	$(hide) echo "include_recovery_dtbo=true" >> $(zip_root)/META/misc_info.txt
-endif
-ifdef BOARD_INCLUDE_RECOVERY_ACPIO
-	$(hide) echo "include_recovery_acpio=true" >> $(zip_root)/META/misc_info.txt
-endif
-ifdef BOARD_RECOVERYIMAGE_PARTITION_SIZE
-	$(hide) echo "recovery_size=$(BOARD_RECOVERYIMAGE_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
-endif
-ifdef TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS
-	@# TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS can be empty to indicate that nothing but defaults should be used.
-	$(hide) echo "recovery_mount_options=$(TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt
-else
-	$(hide) echo "recovery_mount_options=$(DEFAULT_TARGET_RECOVERY_FSTYPE_MOUNT_OPTIONS)" >> $(zip_root)/META/misc_info.txt
-endif
-	$(hide) echo "tool_extensions=$(PRIVATE_TOOL_EXTENSIONS)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "default_system_dev_certificate=$(DEFAULT_SYSTEM_DEV_CERTIFICATE)" >> $(zip_root)/META/misc_info.txt
-ifdef PRODUCT_EXTRA_RECOVERY_KEYS
-	$(hide) echo "extra_recovery_keys=$(PRODUCT_EXTRA_RECOVERY_KEYS)" >> $(zip_root)/META/misc_info.txt
-endif
-	$(hide) echo 'mkbootimg_args=$(BOARD_MKBOOTIMG_ARGS)' >> $(zip_root)/META/misc_info.txt
-	$(hide) echo 'mkbootimg_version_args=$(INTERNAL_MKBOOTIMG_VERSION_ARGS)' >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "multistage_support=1" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "blockimgdiff_versions=3,4" >> $(zip_root)/META/misc_info.txt
-ifeq ($(PRODUCT_BUILD_GENERIC_OTA_PACKAGE),true)
-	$(hide) echo "build_generic_ota_package=true" >> $(zip_root)/META/misc_info.txt
-endif
-ifneq ($(OEM_THUMBPRINT_PROPERTIES),)
-	# OTA scripts are only interested in fingerprint related properties
-	$(hide) echo "oem_fingerprint_properties=$(OEM_THUMBPRINT_PROPERTIES)" >> $(zip_root)/META/misc_info.txt
-endif
+	$(hide) cp $(INSTALLED_MISC_INFO_TARGET) $(zip_root)/META/misc_info.txt
 ifneq ($(PRODUCT_SYSTEM_BASE_FS_PATH),)
 	$(hide) cp $(PRODUCT_SYSTEM_BASE_FS_PATH) \
 	  $(zip_root)/META/$(notdir $(PRODUCT_SYSTEM_BASE_FS_PATH))
@@ -4037,54 +4141,6 @@
 	$(hide) cp $(PRODUCT_ODM_BASE_FS_PATH) \
 	  $(zip_root)/META/$(notdir $(PRODUCT_ODM_BASE_FS_PATH))
 endif
-ifneq (,$(filter address, $(SANITIZE_TARGET)))
-	# We need to create userdata.img with real data because the instrumented libraries are in userdata.img.
-	$(hide) echo "userdata_img_with_data=true" >> $(zip_root)/META/misc_info.txt
-endif
-ifeq ($(BOARD_USES_FULL_RECOVERY_IMAGE),true)
-	$(hide) echo "full_recovery_image=true" >> $(zip_root)/META/misc_info.txt
-endif
-ifeq ($(BOARD_AVB_ENABLE),true)
-	$(hide) echo "avb_enable=true" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_key_path=$(BOARD_AVB_KEY_PATH)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_algorithm=$(BOARD_AVB_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_args=$(BOARD_AVB_MAKE_VBMETA_IMAGE_ARGS)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_boot_add_hash_footer_args=$(BOARD_AVB_BOOT_ADD_HASH_FOOTER_ARGS)" >> $(zip_root)/META/misc_info.txt
-ifdef BOARD_AVB_BOOT_KEY_PATH
-	$(hide) echo "avb_boot_key_path=$(BOARD_AVB_BOOT_KEY_PATH)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_boot_algorithm=$(BOARD_AVB_BOOT_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_boot_rollback_index_location=$(BOARD_AVB_BOOT_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt
-endif # BOARD_AVB_BOOT_KEY_PATH
-	$(hide) echo "avb_recovery_add_hash_footer_args=$(BOARD_AVB_RECOVERY_ADD_HASH_FOOTER_ARGS)" >> $(zip_root)/META/misc_info.txt
-ifdef BOARD_AVB_RECOVERY_KEY_PATH
-	$(hide) echo "avb_recovery_key_path=$(BOARD_AVB_RECOVERY_KEY_PATH)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_recovery_algorithm=$(BOARD_AVB_RECOVERY_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_recovery_rollback_index_location=$(BOARD_AVB_RECOVERY_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt
-endif # BOARD_AVB_RECOVERY_KEY_PATH
-ifneq (,$(strip $(BOARD_AVB_VBMETA_SYSTEM)))
-	$(hide) echo "avb_vbmeta_system=$(BOARD_AVB_VBMETA_SYSTEM)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_system_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_system_key_path=$(BOARD_AVB_VBMETA_SYSTEM_KEY_PATH)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_system_algorithm=$(BOARD_AVB_VBMETA_SYSTEM_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_system_rollback_index_location=$(BOARD_AVB_VBMETA_SYSTEM_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt
-endif # BOARD_AVB_VBMETA_SYSTEM
-ifneq (,$(strip $(BOARD_AVB_VBMETA_VENDOR)))
-	$(hide) echo "avb_vbmeta_vendor=$(BOARD_AVB_VBMETA_VENDOR)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_vendor_args=$(BOARD_AVB_MAKE_VBMETA_SYSTEM_IMAGE_ARGS)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_vendor_key_path=$(BOARD_AVB_VBMETA_VENDOR_KEY_PATH)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_vendor_algorithm=$(BOARD_AVB_VBMETA_VENDOR_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_vbmeta_vendor_rollback_index_location=$(BOARD_AVB_VBMETA_VENDOR_ROLLBACK_INDEX_LOCATION)" >> $(zip_root)/META/misc_info.txt
-endif # BOARD_AVB_VBMETA_VENDOR_KEY_PATH
-endif # BOARD_AVB_ENABLE
-ifdef BOARD_BPT_INPUT_FILES
-	$(hide) echo "board_bpt_enable=true" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "board_bpt_make_table_args=$(BOARD_BPT_MAKE_TABLE_ARGS)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "board_bpt_input_files=$(BOARD_BPT_INPUT_FILES)" >> $(zip_root)/META/misc_info.txt
-endif
-ifdef BOARD_BPT_DISK_SIZE
-	$(hide) echo "board_bpt_disk_size=$(BOARD_BPT_DISK_SIZE)" >> $(zip_root)/META/misc_info.txt
-endif
-	$(call generate-userimage-prop-dictionary, $(zip_root)/META/misc_info.txt)
 ifneq ($(INSTALLED_RECOVERYIMAGE_TARGET),)
 ifdef BUILDING_SYSTEM_IMAGE
 	$(hide) PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH MKBOOTIMG=$(MKBOOTIMG) \
@@ -4100,9 +4156,6 @@
 	$(hide) for conf in $(AB_OTA_POSTINSTALL_CONFIG); do \
 	  echo "$${conf}" >> $(zip_root)/META/postinstall_config.txt; \
 	done
-	@# Include the build type in META/misc_info.txt so the server can easily differentiate production builds.
-	$(hide) echo "build_type=$(TARGET_BUILD_VARIANT)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "ab_update=true" >> $(zip_root)/META/misc_info.txt
 ifdef OSRELEASED_DIRECTORY
 	$(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_id $(zip_root)/META/product_id.txt
 	$(hide) cp $(TARGET_OUT_OEM)/$(OSRELEASED_DIRECTORY)/product_version $(zip_root)/META/product_version.txt
@@ -4136,19 +4189,7 @@
 ifdef BOARD_PREBUILT_DTBOIMAGE
 	$(hide) mkdir -p $(zip_root)/PREBUILT_IMAGES
 	$(hide) cp $(INSTALLED_DTBOIMAGE_TARGET) $(zip_root)/PREBUILT_IMAGES/
-	$(hide) echo "has_dtbo=true" >> $(zip_root)/META/misc_info.txt
-ifeq ($(BOARD_AVB_ENABLE),true)
-	$(hide) echo "dtbo_size=$(BOARD_DTBOIMG_PARTITION_SIZE)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_dtbo_add_hash_footer_args=$(BOARD_AVB_DTBO_ADD_HASH_FOOTER_ARGS)" >> $(zip_root)/META/misc_info.txt
-ifdef BOARD_AVB_DTBO_KEY_PATH
-	$(hide) echo "avb_dtbo_key_path=$(BOARD_AVB_DTBO_KEY_PATH)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_dtbo_algorithm=$(BOARD_AVB_DTBO_ALGORITHM)" >> $(zip_root)/META/misc_info.txt
-	$(hide) echo "avb_dtbo_rollback_index_location=$(BOARD_AVB_DTBO_ROLLBACK_INDEX_LOCATION)" \
-	    >> $(zip_root)/META/misc_info.txt
-endif # BOARD_AVB_DTBO_KEY_PATH
-endif # BOARD_AVB_ENABLE
 endif # BOARD_PREBUILT_DTBOIMAGE
-	$(call dump-dynamic-partitions-info,$(zip_root)/META/misc_info.txt)
 	@# The radio images in BOARD_PACK_RADIOIMAGES will be additionally copied from RADIO/ into
 	@# IMAGES/, which then will be added into <product>-img.zip. Such images must be listed in
 	@# INSTALLED_RADIOIMAGE_TARGET.
@@ -4213,6 +4254,10 @@
 	@# TODO(b/134525174): Remove `-r` after addressing the issue with recovery patch generation.
 	$(hide) PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH MKBOOTIMG=$(MKBOOTIMG) \
 	    build/make/tools/releasetools/add_img_to_target_files -a -r -v -p $(HOST_OUT) $(zip_root)
+ifeq ($(BUILD_QEMU_IMAGES),true)
+	$(hide) AVBTOOL=$(AVBTOOL) $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) $(zip_root)/IMAGES/vbmeta.img \
+	    $(zip_root)/IMAGES/system.img $(zip_root)/IMAGES/VerifiedBootParams.textproto
+endif
 	@# Zip everything up, preserving symlinks and placing META/ files first to
 	@# help early validation of the .zip file while uploading it.
 	$(hide) find $(zip_root)/META | sort >$@.list
@@ -4603,6 +4648,7 @@
 	  $(if $(filter true,$(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS)), \
 	    $(foreach device,$(BOARD_SUPER_PARTITION_BLOCK_DEVICES), \
 	      OTA/super_$(device).img:super_$(device).img)) \
+	  IMAGES/VerifiedBootParams.textproto:VerifiedBootParams.textproto \
 	  OTA/android-info.txt:android-info.txt "IMAGES/*.img:."
 	$(if $(INTERNAL_SUPERIMAGE_MISC_INFO), zip -q -j -u $@ $(INTERNAL_SUPERIMAGE_MISC_INFO))
 	$(if $(INTERNAL_SUPERIMAGE_DIST_TARGET), zip -q -j -u $@ $(INTERNAL_SUPERIMAGE_DIST_TARGET))
@@ -4610,6 +4656,7 @@
 $(INTERNAL_UPDATE_PACKAGE_TARGET):
 	@echo "Package: $@"
 	$(hide) $(ZIP2ZIP) -i $(BUILT_TARGET_FILES_PACKAGE) -o $@ \
+	  IMAGES/VerifiedBootParams.textproto:VerifiedBootParams.textproto \
 	  OTA/android-info.txt:android-info.txt "IMAGES/*.img:."
 endif # BOARD_SUPER_IMAGE_IN_UPDATE_PACKAGE
 
@@ -4624,7 +4671,7 @@
 
 ifeq ($(BUILD_QEMU_IMAGES),true)
 MK_QEMU_IMAGE_SH := device/generic/goldfish/tools/mk_qemu_image.sh
-MK_COMBINE_QEMU_IMAGE_SH := device/generic/goldfish/tools/mk_combined_img.py
+MK_COMBINE_QEMU_IMAGE := $(HOST_OUT_EXECUTABLES)/mk_combined_img
 SGDISK_HOST := $(HOST_OUT_EXECUTABLES)/sgdisk
 
 ifdef INSTALLED_SYSTEMIMAGE_TARGET
@@ -4633,11 +4680,11 @@
 $(INSTALLED_SYSTEM_QEMU_CONFIG): $(INSTALLED_SUPERIMAGE_TARGET) $(INSTALLED_VBMETAIMAGE_TARGET)
 	@echo "$(PRODUCT_OUT)/vbmeta.img vbmeta 1" > $@
 	@echo "$(INSTALLED_SUPERIMAGE_TARGET) super 2" >> $@
-$(INSTALLED_QEMU_SYSTEMIMAGE): $(INSTALLED_VBMETAIMAGE_TARGET) $(MK_COMBINE_QEMU_IMAGE_SH) $(SGDISK_HOST) $(SIMG2IMG) \
+$(INSTALLED_QEMU_SYSTEMIMAGE): $(INSTALLED_VBMETAIMAGE_TARGET) $(MK_COMBINE_QEMU_IMAGE) $(SGDISK_HOST) $(SIMG2IMG) \
     $(INSTALLED_SUPERIMAGE_TARGET) $(INSTALLED_SYSTEM_QEMU_CONFIG)
 	@echo Create system-qemu.img now
 	(export SGDISK=$(SGDISK_HOST) SIMG2IMG=$(SIMG2IMG); \
-     $(MK_COMBINE_QEMU_IMAGE_SH) -i $(INSTALLED_SYSTEM_QEMU_CONFIG) -o $@)
+     $(MK_COMBINE_QEMU_IMAGE) -i $(INSTALLED_SYSTEM_QEMU_CONFIG) -o $@)
 
 systemimage: $(INSTALLED_QEMU_SYSTEMIMAGE)
 droidcore: $(INSTALLED_QEMU_SYSTEMIMAGE)
@@ -4680,7 +4727,6 @@
 endif
 
 QEMU_VERIFIED_BOOT_PARAMS := $(PRODUCT_OUT)/VerifiedBootParams.textproto
-MK_VBMETA_BOOT_KERNEL_CMDLINE_SH := device/generic/goldfish/tools/mk_vbmeta_boot_params.sh
 $(QEMU_VERIFIED_BOOT_PARAMS): $(INSTALLED_VBMETAIMAGE_TARGET) $(INSTALLED_SYSTEMIMAGE_TARGET) \
     $(MK_VBMETA_BOOT_KERNEL_CMDLINE_SH) $(AVBTOOL)
 	@echo Creating $@
diff --git a/core/binary.mk b/core/binary.mk
index e76942c..5d2f965 100644
--- a/core/binary.mk
+++ b/core/binary.mk
@@ -574,7 +574,7 @@
 ## Compile RenderScript with reflected C++
 ####################################################
 
-renderscript_sources := $(filter %.rs %.fs,$(my_src_files))
+renderscript_sources := $(filter %.rscript %.fs,$(my_src_files))
 
 ifneq (,$(renderscript_sources))
 my_soong_problems += rs
@@ -618,7 +618,7 @@
 endif
 
 bc_dep_files := $(addprefix $(renderscript_intermediate)/, \
-    $(patsubst %.fs,%.d, $(patsubst %.rs,%.d, $(notdir $(renderscript_sources)))))
+    $(patsubst %.fs,%.d, $(patsubst %.rscript,%.d, $(notdir $(renderscript_sources)))))
 
 $(RenderScript_file_stamp): PRIVATE_RS_INCLUDES := $(renderscript_includes)
 $(RenderScript_file_stamp): PRIVATE_RS_CC := $(LOCAL_RENDERSCRIPT_CC)
@@ -636,7 +636,7 @@
 LOCAL_INTERMEDIATE_TARGETS += $(RenderScript_file_stamp)
 
 rs_generated_cpps := $(addprefix \
-    $(renderscript_intermediate)/ScriptC_,$(patsubst %.fs,%.cpp, $(patsubst %.rs,%.cpp, \
+    $(renderscript_intermediate)/ScriptC_,$(patsubst %.fs,%.cpp, $(patsubst %.rscript,%.cpp, \
     $(notdir $(renderscript_sources)))))
 
 $(call track-src-file-gen,$(renderscript_sources),$(rs_generated_cpps))
diff --git a/core/config.mk b/core/config.mk
index 5016ff2..730e029 100644
--- a/core/config.mk
+++ b/core/config.mk
@@ -579,7 +579,6 @@
 FS_GET_STATS := $(HOST_OUT_EXECUTABLES)/fs_get_stats$(HOST_EXECUTABLE_SUFFIX)
 MKEXTUSERIMG := $(HOST_OUT_EXECUTABLES)/mkuserimg_mke2fs
 MKE2FS_CONF := system/extras/ext4_utils/mke2fs.conf
-BLK_ALLOC_TO_BASE_FS := $(HOST_OUT_EXECUTABLES)/blk_alloc_to_base_fs$(HOST_EXECUTABLE_SUFFIX)
 MKSQUASHFSUSERIMG := $(HOST_OUT_EXECUTABLES)/mksquashfsimage.sh
 MKF2FSUSERIMG := $(HOST_OUT_EXECUTABLES)/mkf2fsuserimg.sh
 SIMG2IMG := $(HOST_OUT_EXECUTABLES)/simg2img$(HOST_EXECUTABLE_SUFFIX)
@@ -591,7 +590,8 @@
 CHECK_LINK_TYPE := build/make/tools/check_link_type.py
 CHECK_ELF_FILE := build/make/tools/check_elf_file.py
 LPMAKE := $(HOST_OUT_EXECUTABLES)/lpmake$(HOST_EXECUTABLE_SUFFIX)
-BUILD_SUPER_IMAGE := build/make/tools/releasetools/build_super_image.py
+BUILD_IMAGE := $(HOST_OUT_EXECUTABLES)/build_image$(HOST_EXECUTABLE_SUFFIX)
+BUILD_SUPER_IMAGE := $(HOST_OUT_EXECUTABLES)/build_super_image$(HOST_EXECUTABLE_SUFFIX)
 
 PROGUARD_HOME := external/proguard
 PROGUARD := $(PROGUARD_HOME)/bin/proguard.sh
diff --git a/core/definitions.mk b/core/definitions.mk
index d26c445..0e0da9e 100644
--- a/core/definitions.mk
+++ b/core/definitions.mk
@@ -364,7 +364,7 @@
 ###########################################################
 
 define all-renderscript-files-under
-$(call find-subdir-files,$(1) \( -name "*.rs" -or -name "*.fs" \) -and -not -name ".*")
+$(call find-subdir-files,$(1) \( -name "*.rscript" -or -name "*.fs" \) -and -not -name ".*")
 endef
 
 ###########################################################
diff --git a/core/java_renderscript.mk b/core/java_renderscript.mk
index 13a6f8e..820967a 100644
--- a/core/java_renderscript.mk
+++ b/core/java_renderscript.mk
@@ -1,10 +1,10 @@
 ###############################################################
 ## Renderscript support for java
-## Adds rules to convert .rs files to .java and .bc files
+## Adds rules to convert .rscript files to .java and .bc files
 ###############################################################
 
-renderscript_sources := $(filter %.rs,$(LOCAL_SRC_FILES))
-LOCAL_SRC_FILES := $(filter-out %.rs,$(LOCAL_SRC_FILES))
+renderscript_sources := $(filter %.rscript,$(LOCAL_SRC_FILES))
+LOCAL_SRC_FILES := $(filter-out %.rscript,$(LOCAL_SRC_FILES))
 
 rs_generated_res_zip :=
 rs_generated_src_jar :=
@@ -67,7 +67,7 @@
 LOCAL_RENDERSCRIPT_INCLUDES := $(LOCAL_RENDERSCRIPT_INCLUDES_OVERRIDE)
 endif
 
-bc_files := $(patsubst %.rs,%.bc, $(notdir $(renderscript_sources)))
+bc_files := $(patsubst %.rscript,%.bc, $(notdir $(renderscript_sources)))
 bc_dep_files := $(addprefix $(renderscript_intermediate.COMMON)/,$(patsubst %.bc,%.d,$(bc_files)))
 
 $(rs_generated_src_jar): PRIVATE_RS_INCLUDES := $(LOCAL_RENDERSCRIPT_INCLUDES)
diff --git a/core/main.mk b/core/main.mk
index 93fd90c..ff670dc 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -1275,6 +1275,14 @@
 # when native bridge is active.
 APEX_LIBS_ABSENCE_CHECK_EXCLUDE += lib/arm lib64/arm64
 
+ifdef TARGET_NATIVE_BRIDGE_RELATIVE_PATH
+	APEX_LIBS_ABSENCE_CHECK_EXCLUDE += lib/$(TARGET_NATIVE_BRIDGE_RELATIVE_PATH) lib64/$(TARGET_NATIVE_BRIDGE_RELATIVE_PATH)
+endif
+
+ifdef TARGET_NATIVE_BRIDGE_2ND_RELATIVE_PATH
+	APEX_LIBS_ABSENCE_CHECK_EXCLUDE += lib/$(TARGET_NATIVE_BRIDGE_2ND_RELATIVE_PATH) lib64/$(TARGET_NATIVE_BRIDGE_2ND_RELATIVE_PATH)
+endif
+
 # Exclude vndk-* subdirectories which contain prebuilts from older releases.
 APEX_LIBS_ABSENCE_CHECK_EXCLUDE += lib/vndk-% lib64/vndk-%
 
@@ -1309,7 +1317,7 @@
         $(filter-out $(foreach dir,$(APEX_LIBS_ABSENCE_CHECK_EXCLUDE), \
                        $(TARGET_OUT)/$(if $(findstring %,$(dir)),$(dir),$(dir)/%)), \
           $(filter $(TARGET_OUT)/lib/% $(TARGET_OUT)/lib64/%,$(1)))), \
-      APEX libraries found in system image (see comment for check-apex-libs-absence in \
+      APEX libraries found in product_target_FILES (see comment for check-apex-libs-absence in \
       build/make/core/main.mk for details))
   endef
 
@@ -1317,6 +1325,11 @@
   # dependencies visible to make, but as long as they have install rules in
   # /system they may still be created there through other make targets. To catch
   # that we also do a check on disk just before the system image is built.
+  # NB: This check may fail if you have built intermediate targets in the out
+  # tree earlier, e.g. "m <some lib in APEX_MODULE_LIBS>". In that case, please
+  # try "m installclean && m systemimage" to get a correct system image. For
+  # local work you can also disable the check with the
+  # DISABLE_APEX_LIBS_ABSENCE_CHECK environment variable.
   define check-apex-libs-absence-on-disk
     $(hide) ( \
       cd $(TARGET_OUT) && \
@@ -1325,8 +1338,9 @@
         -type f \( -false $(foreach lib,$(APEX_MODULE_LIBS),-o -name $(lib)) \) \
         -print) && \
       if [ -n "$$findres" ]; then \
-        echo "APEX libraries found in system image (see comment for check-apex-libs-absence" 1>&2; \
-        echo "in build/make/core/main.mk for details):" 1>&2; \
+        echo "APEX libraries found in system image in TARGET_OUT (see comments for" 1>&2; \
+        echo "check-apex-libs-absence and check-apex-libs-absence-on-disk in" 1>&2; \
+        echo "build/make/core/main.mk for details):" 1>&2; \
         echo "$$findres" | sort 1>&2; \
         false; \
       fi; \
diff --git a/core/soong_config.mk b/core/soong_config.mk
index c32049d..eebe843 100644
--- a/core/soong_config.mk
+++ b/core/soong_config.mk
@@ -25,7 +25,7 @@
 $(call add_json_str,  Make_suffix, -$(TARGET_PRODUCT))
 
 $(call add_json_str,  BuildId,                           $(BUILD_ID))
-$(call add_json_str,  BuildNumberFromFile,               $$$(BUILD_NUMBER_FROM_FILE))
+$(call add_json_str,  BuildNumberFromFile,               $(BUILD_NUMBER_FROM_FILE))
 
 $(call add_json_str,  Platform_version_name,             $(PLATFORM_VERSION))
 $(call add_json_val,  Platform_sdk_version,              $(PLATFORM_SDK_VERSION))
@@ -62,11 +62,13 @@
 $(call add_json_str,  NativeBridgeArchVariant,           $(TARGET_NATIVE_BRIDGE_ARCH_VARIANT))
 $(call add_json_str,  NativeBridgeCpuVariant,            $(TARGET_NATIVE_BRIDGE_CPU_VARIANT))
 $(call add_json_list, NativeBridgeAbi,                   $(TARGET_NATIVE_BRIDGE_ABI))
+$(call add_json_str,  NativeBridgeRelativePath,          $(TARGET_NATIVE_BRIDGE_RELATIVE_PATH))
 
 $(call add_json_str,  NativeBridgeSecondaryArch,         $(TARGET_NATIVE_BRIDGE_2ND_ARCH))
 $(call add_json_str,  NativeBridgeSecondaryArchVariant,  $(TARGET_NATIVE_BRIDGE_2ND_ARCH_VARIANT))
 $(call add_json_str,  NativeBridgeSecondaryCpuVariant,   $(TARGET_NATIVE_BRIDGE_2ND_CPU_VARIANT))
 $(call add_json_list, NativeBridgeSecondaryAbi,          $(TARGET_NATIVE_BRIDGE_2ND_ABI))
+$(call add_json_str,  NativeBridgeSecondaryRelativePath, $(TARGET_NATIVE_BRIDGE_2ND_RELATIVE_PATH))
 
 $(call add_json_str,  HostArch,                          $(HOST_ARCH))
 $(call add_json_str,  HostSecondaryArch,                 $(HOST_2ND_ARCH))
diff --git a/core/tasks/oem_image.mk b/core/tasks/oem_image.mk
index 489feeb..a847b9d 100644
--- a/core/tasks/oem_image.mk
+++ b/core/tasks/oem_image.mk
@@ -34,10 +34,10 @@
 	@mkdir -p $(TARGET_OUT_OEM)
 	@mkdir -p $(oemimage_intermediates) && rm -rf $(oemimage_intermediates)/oem_image_info.txt
 	$(call generate-image-prop-dictionary, $(oemimage_intermediates)/oem_image_info.txt,oem,skip_fsck=true)
-	$(hide) PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-	  build/make/tools/releasetools/build_image.py \
-	  $(TARGET_OUT_OEM) $(oemimage_intermediates)/oem_image_info.txt $@ $(TARGET_OUT)
-	$(hide) $(call assert-max-image-size,$@,$(BOARD_OEMIMAGE_PARTITION_SIZE))
+	PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
+	    $(BUILD_IMAGE) \
+	        $(TARGET_OUT_OEM) $(oemimage_intermediates)/oem_image_info.txt $@ $(TARGET_OUT)
+	$(call assert-max-image-size,$@,$(BOARD_OEMIMAGE_PARTITION_SIZE))
 
 .PHONY: oem_image
 oem_image : $(INSTALLED_OEMIMAGE_TARGET)
diff --git a/core/tasks/tools/build_custom_image.mk b/core/tasks/tools/build_custom_image.mk
index b0d1a0c..4721591 100644
--- a/core/tasks/tools/build_custom_image.mk
+++ b/core/tasks/tools/build_custom_image.mk
@@ -152,8 +152,8 @@
 	$(if $(filter oem,$(PRIVATE_MOUNT_POINT)), \
 	  $(hide) echo "oem.buildnumber=$(BUILD_NUMBER_FROM_FILE)" >> $(PRIVATE_STAGING_DIR)/oem.prop)
 	$(hide) PATH=$(INTERNAL_USERIMAGES_BINARY_PATHS):$$PATH \
-	  build/make/tools/releasetools/build_image.py \
-	  $(PRIVATE_STAGING_DIR) $(PRIVATE_INTERMEDIATES)/image_info.txt $@ $(TARGET_OUT)
+	    $(BUILD_IMAGE) \
+	        $(PRIVATE_STAGING_DIR) $(PRIVATE_INTERMEDIATES)/image_info.txt $@ $(TARGET_OUT)
 
 my_installed_custom_image := $(PRODUCT_OUT)/$(notdir $(my_built_custom_image))
 $(my_installed_custom_image) : $(my_built_custom_image)
diff --git a/envsetup.sh b/envsetup.sh
index 941c5f7..9198ee5 100644
--- a/envsetup.sh
+++ b/envsetup.sh
@@ -272,12 +272,12 @@
 
     # Append asuite prebuilts path to ANDROID_BUILD_PATHS.
     local os_arch=$(get_build_var HOST_PREBUILT_TAG)
-    local ACLOUD_PATH="$T/prebuilts/asuite/acloud/$os_arch:"
-    local AIDEGEN_PATH="$T/prebuilts/asuite/aidegen/$os_arch:"
-    local ATEST_PATH="$T/prebuilts/asuite/atest/$os_arch:"
-    export ANDROID_BUILD_PATHS=$ANDROID_BUILD_PATHS:$ACLOUD_PATH$AIDEGEN_PATH$ATEST_PATH
+    local ACLOUD_PATH="$T/prebuilts/asuite/acloud/$os_arch"
+    local AIDEGEN_PATH="$T/prebuilts/asuite/aidegen/$os_arch"
+    local ATEST_PATH="$T/prebuilts/asuite/atest/$os_arch"
+    export ANDROID_BUILD_PATHS=$ANDROID_BUILD_PATHS:$ACLOUD_PATH:$AIDEGEN_PATH:$ATEST_PATH:
 
-    export PATH=$ANDROID_BUILD_PATHS:$PATH
+    export PATH=$ANDROID_BUILD_PATHS$PATH
 
     # out with the duplicate old
     if [ -n $ANDROID_PYTHONPATH ]; then
diff --git a/tools/releasetools/Android.bp b/tools/releasetools/Android.bp
index 6b4e4f5..d4c4673 100644
--- a/tools/releasetools/Android.bp
+++ b/tools/releasetools/Android.bp
@@ -13,55 +13,124 @@
 // limitations under the License.
 
 python_defaults {
-    name: "releasetools_defaults",
+    name: "releasetools_library_defaults",
     version: {
         py2: {
             enabled: true,
-            embedded_launcher: false,
         },
         py3: {
             enabled: true,
-            embedded_launcher: false,
         },
     },
 }
 
 python_library_host {
-    name: "releasetools_lib",
-    defaults: ["releasetools_defaults"],
+    name: "releasetools_common",
+    defaults: ["releasetools_library_defaults"],
+    srcs: [
+        "blockimgdiff.py",
+        "common.py",
+        "images.py",
+        "rangelib.py",
+        "sparse_img.py",
+    ],
+    // Only the tools that are referenced directly are listed as required modules. For example,
+    // `avbtool` is not here, as the script always uses the one from info_dict['avb_avbtool'].
+    required: [
+        "aapt",
+        "boot_signer",
+        "brotli",
+        "bsdiff",
+        "imgdiff",
+        "minigzip",
+        "mkbootfs",
+    ],
+}
+
+python_library_host {
+    name: "releasetools_verity_utils",
+    defaults: ["releasetools_library_defaults"],
+    srcs: [
+        "verity_utils.py",
+    ],
+    required: [
+        "append2simg",
+        "build_verity_metadata",
+        "build_verity_tree",
+        "fec",
+    ],
+}
+
+python_defaults {
+    name: "releasetools_binary_defaults",
+    version: {
+        py2: {
+            enabled: true,
+            embedded_launcher: true,
+        },
+        py3: {
+            enabled: false,
+            embedded_launcher: false,
+        },
+    },
+}
+
+python_binary_host {
+    name: "build_image",
+    defaults: ["releasetools_binary_defaults"],
+    srcs: [
+        "build_image.py",
+    ],
+    main: "build_image.py",
+    libs: [
+        "releasetools_common",
+        "releasetools_verity_utils",
+    ],
+    required: [
+        "blk_alloc_to_base_fs",
+        "e2fsck",
+        "simg2img",
+        "tune2fs",
+    ],
+}
+
+python_binary_host {
+    name: "build_super_image",
+    defaults: ["releasetools_binary_defaults"],
+    srcs: [
+        "build_super_image.py",
+    ],
+    main: "build_super_image.py",
+    libs: [
+        "releasetools_common",
+    ],
+}
+
+python_defaults {
+    name: "releasetools_test_defaults",
     srcs: [
         "add_img_to_target_files.py",
         "apex_utils.py",
-        "blockimgdiff.py",
         "build_image.py",
         "build_super_image.py",
         "check_ota_package_signature.py",
         "check_target_files_signatures.py",
-        "common.py",
         "edify_generator.py",
         "img_from_target_files.py",
         "make_recovery_patch.py",
         "merge_target_files.py",
         "ota_from_target_files.py",
         "ota_package_parser.py",
-        "rangelib.py",
         "sign_apex.py",
         "sign_target_files_apks.py",
-        "sparse_img.py",
         "target_files_diff.py",
         "validate_target_files.py",
-        "verity_utils.py",
-    ],
-}
 
-python_defaults {
-    name: "releasetools_test_defaults",
-    defaults: ["releasetools_defaults"],
-    srcs: [
         "test_*.py",
     ],
     libs: [
-        "releasetools_lib",
+        "releasetools_common",
+        "releasetools_verity_utils",
     ],
     data: [
         "testdata/*",
@@ -78,6 +147,9 @@
     version: {
         py2: {
             enabled: true,
+            // When using embedded launcher, atest will try (but may fail) to load libc++.so from
+            // host, because the test executable won't be able to find the needed libs via its
+            // runpath.
             embedded_launcher: false,
         },
         py3: {
diff --git a/tools/releasetools/blockimgdiff.py b/tools/releasetools/blockimgdiff.py
index ecb1d31..72f065d 100644
--- a/tools/releasetools/blockimgdiff.py
+++ b/tools/releasetools/blockimgdiff.py
@@ -28,12 +28,12 @@
 import threading
 import zlib
 from collections import deque, namedtuple, OrderedDict
-from hashlib import sha1
 
 import common
+from images import EmptyImage
 from rangelib import RangeSet
 
-__all__ = ["EmptyImage", "DataImage", "BlockImageDiff"]
+__all__ = ["BlockImageDiff"]
 
 logger = logging.getLogger(__name__)
 
@@ -60,209 +60,6 @@
     return PatchInfo(imgdiff, f.read())
 
 
-class Image(object):
-  def RangeSha1(self, ranges):
-    raise NotImplementedError
-
-  def ReadRangeSet(self, ranges):
-    raise NotImplementedError
-
-  def TotalSha1(self, include_clobbered_blocks=False):
-    raise NotImplementedError
-
-  def WriteRangeDataToFd(self, ranges, fd):
-    raise NotImplementedError
-
-
-class EmptyImage(Image):
-  """A zero-length image."""
-
-  def __init__(self):
-    self.blocksize = 4096
-    self.care_map = RangeSet()
-    self.clobbered_blocks = RangeSet()
-    self.extended = RangeSet()
-    self.total_blocks = 0
-    self.file_map = {}
-    self.hashtree_info = None
-
-  def RangeSha1(self, ranges):
-    return sha1().hexdigest()
-
-  def ReadRangeSet(self, ranges):
-    return ()
-
-  def TotalSha1(self, include_clobbered_blocks=False):
-    # EmptyImage always carries empty clobbered_blocks, so
-    # include_clobbered_blocks can be ignored.
-    assert self.clobbered_blocks.size() == 0
-    return sha1().hexdigest()
-
-  def WriteRangeDataToFd(self, ranges, fd):
-    raise ValueError("Can't write data from EmptyImage to file")
-
-
-class DataImage(Image):
-  """An image wrapped around a single string of data."""
-
-  def __init__(self, data, trim=False, pad=False):
-    self.data = data
-    self.blocksize = 4096
-
-    assert not (trim and pad)
-
-    partial = len(self.data) % self.blocksize
-    padded = False
-    if partial > 0:
-      if trim:
-        self.data = self.data[:-partial]
-      elif pad:
-        self.data += '\0' * (self.blocksize - partial)
-        padded = True
-      else:
-        raise ValueError(("data for DataImage must be multiple of %d bytes "
-                          "unless trim or pad is specified") %
-                         (self.blocksize,))
-
-    assert len(self.data) % self.blocksize == 0
-
-    self.total_blocks = len(self.data) // self.blocksize
-    self.care_map = RangeSet(data=(0, self.total_blocks))
-    # When the last block is padded, we always write the whole block even for
-    # incremental OTAs. Because otherwise the last block may get skipped if
-    # unchanged for an incremental, but would fail the post-install
-    # verification if it has non-zero contents in the padding bytes.
-    # Bug: 23828506
-    if padded:
-      clobbered_blocks = [self.total_blocks-1, self.total_blocks]
-    else:
-      clobbered_blocks = []
-    self.clobbered_blocks = clobbered_blocks
-    self.extended = RangeSet()
-
-    zero_blocks = []
-    nonzero_blocks = []
-    reference = '\0' * self.blocksize
-
-    for i in range(self.total_blocks-1 if padded else self.total_blocks):
-      d = self.data[i*self.blocksize : (i+1)*self.blocksize]
-      if d == reference:
-        zero_blocks.append(i)
-        zero_blocks.append(i+1)
-      else:
-        nonzero_blocks.append(i)
-        nonzero_blocks.append(i+1)
-
-    assert zero_blocks or nonzero_blocks or clobbered_blocks
-
-    self.file_map = dict()
-    if zero_blocks:
-      self.file_map["__ZERO"] = RangeSet(data=zero_blocks)
-    if nonzero_blocks:
-      self.file_map["__NONZERO"] = RangeSet(data=nonzero_blocks)
-    if clobbered_blocks:
-      self.file_map["__COPY"] = RangeSet(data=clobbered_blocks)
-
-  def _GetRangeData(self, ranges):
-    for s, e in ranges:
-      yield self.data[s*self.blocksize:e*self.blocksize]
-
-  def RangeSha1(self, ranges):
-    h = sha1()
-    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
-      h.update(data)
-    return h.hexdigest()
-
-  def ReadRangeSet(self, ranges):
-    return list(self._GetRangeData(ranges))
-
-  def TotalSha1(self, include_clobbered_blocks=False):
-    if not include_clobbered_blocks:
-      return self.RangeSha1(self.care_map.subtract(self.clobbered_blocks))
-    return sha1(self.data).hexdigest()
-
-  def WriteRangeDataToFd(self, ranges, fd):
-    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
-      fd.write(data)
-
-
-class FileImage(Image):
-  """An image wrapped around a raw image file."""
-
-  def __init__(self, path, hashtree_info_generator=None):
-    self.path = path
-    self.blocksize = 4096
-    self._file_size = os.path.getsize(self.path)
-    self._file = open(self.path, 'rb')
-
-    if self._file_size % self.blocksize != 0:
-      raise ValueError("Size of file %s must be multiple of %d bytes, but is %d"
-                       % self.path, self.blocksize, self._file_size)
-
-    self.total_blocks = self._file_size // self.blocksize
-    self.care_map = RangeSet(data=(0, self.total_blocks))
-    self.clobbered_blocks = RangeSet()
-    self.extended = RangeSet()
-
-    self.generator_lock = threading.Lock()
-
-    self.hashtree_info = None
-    if hashtree_info_generator:
-      self.hashtree_info = hashtree_info_generator.Generate(self)
-
-    zero_blocks = []
-    nonzero_blocks = []
-    reference = '\0' * self.blocksize
-
-    for i in range(self.total_blocks):
-      d = self._file.read(self.blocksize)
-      if d == reference:
-        zero_blocks.append(i)
-        zero_blocks.append(i+1)
-      else:
-        nonzero_blocks.append(i)
-        nonzero_blocks.append(i+1)
-
-    assert zero_blocks or nonzero_blocks
-
-    self.file_map = {}
-    if zero_blocks:
-      self.file_map["__ZERO"] = RangeSet(data=zero_blocks)
-    if nonzero_blocks:
-      self.file_map["__NONZERO"] = RangeSet(data=nonzero_blocks)
-    if self.hashtree_info:
-      self.file_map["__HASHTREE"] = self.hashtree_info.hashtree_range
-
-  def __del__(self):
-    self._file.close()
-
-  def _GetRangeData(self, ranges):
-    # Use a lock to protect the generator so that we will not run two
-    # instances of this generator on the same object simultaneously.
-    with self.generator_lock:
-      for s, e in ranges:
-        self._file.seek(s * self.blocksize)
-        for _ in range(s, e):
-          yield self._file.read(self.blocksize)
-
-  def RangeSha1(self, ranges):
-    h = sha1()
-    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
-      h.update(data)
-    return h.hexdigest()
-
-  def ReadRangeSet(self, ranges):
-    return list(self._GetRangeData(ranges))
-
-  def TotalSha1(self, include_clobbered_blocks=False):
-    assert not self.clobbered_blocks
-    return self.RangeSha1(self.care_map)
-
-  def WriteRangeDataToFd(self, ranges, fd):
-    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
-      fd.write(data)
-
-
 class Transfer(object):
   def __init__(self, tgt_name, src_name, tgt_ranges, src_ranges, tgt_sha1,
                src_sha1, style, by_id):
diff --git a/tools/releasetools/build_image.py b/tools/releasetools/build_image.py
index ee05dd5..af508fe 100755
--- a/tools/releasetools/build_image.py
+++ b/tools/releasetools/build_image.py
@@ -18,7 +18,7 @@
 Builds output_image from the given input_directory, properties_file,
 and writes the image to target_output_directory.
 
-Usage:  build_image.py input_directory properties_file output_image \\
+Usage:  build_image input_directory properties_file output_image \\
             target_output_directory
 """
 
diff --git a/tools/releasetools/common.py b/tools/releasetools/common.py
index 0030afa..913601f 100644
--- a/tools/releasetools/common.py
+++ b/tools/releasetools/common.py
@@ -39,8 +39,9 @@
 import zipfile
 from hashlib import sha1, sha256
 
-import blockimgdiff
+import images
 import sparse_img
+from blockimgdiff import BlockImageDiff
 
 logger = logging.getLogger(__name__)
 
@@ -250,6 +251,8 @@
   """
   proc = Run(args, verbose=verbose, **kwargs)
   output, _ = proc.communicate()
+  if output is None:
+    output = ""
   # Don't log any if caller explicitly says so.
   if verbose != False:
     logger.info("%s", output.rstrip())
@@ -460,10 +463,13 @@
   return LoadDictionaryFromLines(data.split("\n"))
 
 
-def LoadDictionaryFromFile(file_path):
+def LoadListFromFile(file_path):
   with open(file_path) as f:
-    lines = list(f.read().splitlines())
+    return f.read().splitlines()
 
+
+def LoadDictionaryFromFile(file_path):
+  lines = LoadListFromFile(file_path)
   return LoadDictionaryFromLines(lines)
 
 
@@ -915,8 +921,8 @@
   # ota_from_target_files.py (since LMP).
   assert os.path.exists(path) and os.path.exists(mappath)
 
-  return blockimgdiff.FileImage(path, hashtree_info_generator=
-                                hashtree_info_generator)
+  return images.FileImage(path, hashtree_info_generator=hashtree_info_generator)
+
 
 def GetSparseImage(which, tmpdir, input_zip, allow_shared_blocks,
                    hashtree_info_generator=None):
@@ -1916,9 +1922,9 @@
     assert version >= 3
     self.version = version
 
-    b = blockimgdiff.BlockImageDiff(tgt, src, threads=OPTIONS.worker_threads,
-                                    version=self.version,
-                                    disable_imgdiff=self.disable_imgdiff)
+    b = BlockImageDiff(tgt, src, threads=OPTIONS.worker_threads,
+                       version=self.version,
+                       disable_imgdiff=self.disable_imgdiff)
     self.path = os.path.join(MakeTempDir(), partition)
     b.Compute(self.path)
     self._required_cache = b.max_stashed_size
@@ -2172,8 +2178,10 @@
     return ctx.hexdigest()
 
 
-DataImage = blockimgdiff.DataImage
-EmptyImage = blockimgdiff.EmptyImage
+# Expose these two classes to support vendor-specific scripts
+DataImage = images.DataImage
+EmptyImage = images.EmptyImage
+
 
 # map recovery.fstab's fs_types to mount/format "partition types"
 PARTITION_TYPES = {
diff --git a/tools/releasetools/images.py b/tools/releasetools/images.py
new file mode 100644
index 0000000..a24148a
--- /dev/null
+++ b/tools/releasetools/images.py
@@ -0,0 +1,223 @@
+# Copyright (C) 2019 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific
+
+import os
+import threading
+from hashlib import sha1
+
+from rangelib import RangeSet
+
+__all__ = ["EmptyImage", "DataImage", "FileImage"]
+
+
+class Image(object):
+  def RangeSha1(self, ranges):
+    raise NotImplementedError
+
+  def ReadRangeSet(self, ranges):
+    raise NotImplementedError
+
+  def TotalSha1(self, include_clobbered_blocks=False):
+    raise NotImplementedError
+
+  def WriteRangeDataToFd(self, ranges, fd):
+    raise NotImplementedError
+
+
+class EmptyImage(Image):
+  """A zero-length image."""
+
+  def __init__(self):
+    self.blocksize = 4096
+    self.care_map = RangeSet()
+    self.clobbered_blocks = RangeSet()
+    self.extended = RangeSet()
+    self.total_blocks = 0
+    self.file_map = {}
+    self.hashtree_info = None
+
+  def RangeSha1(self, ranges):
+    return sha1().hexdigest()
+
+  def ReadRangeSet(self, ranges):
+    return ()
+
+  def TotalSha1(self, include_clobbered_blocks=False):
+    # EmptyImage always carries empty clobbered_blocks, so
+    # include_clobbered_blocks can be ignored.
+    assert self.clobbered_blocks.size() == 0
+    return sha1().hexdigest()
+
+  def WriteRangeDataToFd(self, ranges, fd):
+    raise ValueError("Can't write data from EmptyImage to file")
+
+
+class DataImage(Image):
+  """An image wrapped around a single string of data."""
+
+  def __init__(self, data, trim=False, pad=False):
+    self.data = data
+    self.blocksize = 4096
+
+    assert not (trim and pad)
+
+    partial = len(self.data) % self.blocksize
+    padded = False
+    if partial > 0:
+      if trim:
+        self.data = self.data[:-partial]
+      elif pad:
+        self.data += '\0' * (self.blocksize - partial)
+        padded = True
+      else:
+        raise ValueError(("data for DataImage must be multiple of %d bytes "
+                          "unless trim or pad is specified") %
+                         (self.blocksize,))
+
+    assert len(self.data) % self.blocksize == 0
+
+    self.total_blocks = len(self.data) // self.blocksize
+    self.care_map = RangeSet(data=(0, self.total_blocks))
+    # When the last block is padded, we always write the whole block even for
+    # incremental OTAs. Because otherwise the last block may get skipped if
+    # unchanged for an incremental, but would fail the post-install
+    # verification if it has non-zero contents in the padding bytes.
+    # Bug: 23828506
+    if padded:
+      clobbered_blocks = [self.total_blocks-1, self.total_blocks]
+    else:
+      clobbered_blocks = []
+    self.clobbered_blocks = clobbered_blocks
+    self.extended = RangeSet()
+
+    zero_blocks = []
+    nonzero_blocks = []
+    reference = '\0' * self.blocksize
+
+    for i in range(self.total_blocks-1 if padded else self.total_blocks):
+      d = self.data[i*self.blocksize : (i+1)*self.blocksize]
+      if d == reference:
+        zero_blocks.append(i)
+        zero_blocks.append(i+1)
+      else:
+        nonzero_blocks.append(i)
+        nonzero_blocks.append(i+1)
+
+    assert zero_blocks or nonzero_blocks or clobbered_blocks
+
+    self.file_map = dict()
+    if zero_blocks:
+      self.file_map["__ZERO"] = RangeSet(data=zero_blocks)
+    if nonzero_blocks:
+      self.file_map["__NONZERO"] = RangeSet(data=nonzero_blocks)
+    if clobbered_blocks:
+      self.file_map["__COPY"] = RangeSet(data=clobbered_blocks)
+
+  def _GetRangeData(self, ranges):
+    for s, e in ranges:
+      yield self.data[s*self.blocksize:e*self.blocksize]
+
+  def RangeSha1(self, ranges):
+    h = sha1()
+    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
+      h.update(data)
+    return h.hexdigest()
+
+  def ReadRangeSet(self, ranges):
+    return list(self._GetRangeData(ranges))
+
+  def TotalSha1(self, include_clobbered_blocks=False):
+    if not include_clobbered_blocks:
+      return self.RangeSha1(self.care_map.subtract(self.clobbered_blocks))
+    return sha1(self.data).hexdigest()
+
+  def WriteRangeDataToFd(self, ranges, fd):
+    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
+      fd.write(data)
+
+
+class FileImage(Image):
+  """An image wrapped around a raw image file."""
+
+  def __init__(self, path, hashtree_info_generator=None):
+    self.path = path
+    self.blocksize = 4096
+    self._file_size = os.path.getsize(self.path)
+    self._file = open(self.path, 'rb')
+
+    if self._file_size % self.blocksize != 0:
+      raise ValueError("Size of file %s must be multiple of %d bytes, but is %d"
+                       % self.path, self.blocksize, self._file_size)
+
+    self.total_blocks = self._file_size // self.blocksize
+    self.care_map = RangeSet(data=(0, self.total_blocks))
+    self.clobbered_blocks = RangeSet()
+    self.extended = RangeSet()
+
+    self.generator_lock = threading.Lock()
+
+    self.hashtree_info = None
+    if hashtree_info_generator:
+      self.hashtree_info = hashtree_info_generator.Generate(self)
+
+    zero_blocks = []
+    nonzero_blocks = []
+    reference = '\0' * self.blocksize
+
+    for i in range(self.total_blocks):
+      d = self._file.read(self.blocksize)
+      if d == reference:
+        zero_blocks.append(i)
+        zero_blocks.append(i+1)
+      else:
+        nonzero_blocks.append(i)
+        nonzero_blocks.append(i+1)
+
+    assert zero_blocks or nonzero_blocks
+
+    self.file_map = {}
+    if zero_blocks:
+      self.file_map["__ZERO"] = RangeSet(data=zero_blocks)
+    if nonzero_blocks:
+      self.file_map["__NONZERO"] = RangeSet(data=nonzero_blocks)
+    if self.hashtree_info:
+      self.file_map["__HASHTREE"] = self.hashtree_info.hashtree_range
+
+  def __del__(self):
+    self._file.close()
+
+  def _GetRangeData(self, ranges):
+    # Use a lock to protect the generator so that we will not run two
+    # instances of this generator on the same object simultaneously.
+    with self.generator_lock:
+      for s, e in ranges:
+        self._file.seek(s * self.blocksize)
+        for _ in range(s, e):
+          yield self._file.read(self.blocksize)
+
+  def RangeSha1(self, ranges):
+    h = sha1()
+    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
+      h.update(data)
+    return h.hexdigest()
+
+  def ReadRangeSet(self, ranges):
+    return list(self._GetRangeData(ranges))
+
+  def TotalSha1(self, include_clobbered_blocks=False):
+    assert not self.clobbered_blocks
+    return self.RangeSha1(self.care_map)
+
+  def WriteRangeDataToFd(self, ranges, fd):
+    for data in self._GetRangeData(ranges): # pylint: disable=not-an-iterable
+      fd.write(data)
diff --git a/tools/releasetools/merge_target_files.py b/tools/releasetools/merge_target_files.py
index f73bae1..7343f38 100755
--- a/tools/releasetools/merge_target_files.py
+++ b/tools/releasetools/merge_target_files.py
@@ -13,9 +13,8 @@
 # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
 # License for the specific language governing permissions and limitations under
 # the License.
-
-"""
-This script merges two partial target files packages.
+#
+"""This script merges two partial target files packages.
 
 One package contains framework files, and the other contains vendor files.
 It produces a complete target files package that can be used to generate an
@@ -239,8 +238,7 @@
   # Filter the extract_item_list to remove any items that do not exist in the
   # zip file. Otherwise, the extraction step will fail.
 
-  with zipfile.ZipFile(
-      target_files, allowZip64=True) as target_files_zipfile:
+  with zipfile.ZipFile(target_files, allowZip64=True) as target_files_zipfile:
     target_files_namelist = target_files_zipfile.namelist()
 
   filtered_extract_item_list = []
@@ -282,21 +280,6 @@
       shutil.copyfile(original_file_path, copied_file_path)
 
 
-def read_config_list(config_file_path):
-  """Reads a config file into a list of strings.
-
-  Expects the file to be newline-separated.
-
-  Args:
-    config_file_path: The path to the config file to open and read.
-
-  Returns:
-    The list of strings in the config file.
-  """
-  with open(config_file_path) as config_file:
-    return config_file.read().splitlines()
-
-
 def validate_config_lists(framework_item_list, framework_misc_info_keys,
                           vendor_item_list):
   """Performs validations on the merge config lists.
@@ -748,14 +731,14 @@
 
   find_command = ['find', target_path] + (extra_args or [])
   find_process = common.Run(find_command, stdout=subprocess.PIPE, verbose=False)
-  return common.RunAndCheckOutput(['sort'], stdin=find_process.stdout,
+  return common.RunAndCheckOutput(['sort'],
+                                  stdin=find_process.stdout,
                                   verbose=False)
 
 
 def create_merged_package(temp_dir, framework_target_files, framework_item_list,
                           vendor_target_files, vendor_item_list,
-                          framework_misc_info_keys,
-                          rebuild_recovery):
+                          framework_misc_info_keys, rebuild_recovery):
   """Merges two target files packages into one target files structure.
 
   Args:
@@ -875,8 +858,7 @@
   """
   # Create super_empty.img using the merged misc_info.txt.
 
-  misc_info_txt = os.path.join(target_dir, 'META',
-                               'misc_info.txt')
+  misc_info_txt = os.path.join(target_dir, 'META', 'misc_info.txt')
 
   use_dynamic_partitions = common.LoadDictionaryFromFile(misc_info_txt).get(
       'use_dynamic_partitions')
@@ -885,8 +867,7 @@
     raise ValueError(
         'Building super_empty.img requires use_dynamic_partitions=true.')
   elif use_dynamic_partitions == 'true':
-    super_empty_img = os.path.join(target_dir, 'IMAGES',
-                                   'super_empty.img')
+    super_empty_img = os.path.join(target_dir, 'IMAGES', 'super_empty.img')
     build_super_image_args = [
         misc_info_txt,
         super_empty_img,
@@ -898,21 +879,6 @@
       shutil.copyfile(super_empty_img, output_super_empty)
 
 
-def create_img_archive(source_path, target_path):
-  """Creates IMG archive in target path from source package.
-
-  Args:
-    source_path: Path of the source package to be packed.
-    target_path: Create IMG package from the source package.
-  """
-
-  img_from_target_files_args = [
-      source_path,
-      target_path,
-  ]
-  img_from_target_files.main(img_from_target_files_args)
-
-
 def create_target_files_archive(output_file, source_dir, temp_dir):
   """Creates archive from target package.
 
@@ -923,13 +889,12 @@
   """
   output_target_files_list = os.path.join(temp_dir, 'output.list')
   output_zip = os.path.abspath(output_file)
-  output_target_files_meta_dir = os.path.join(source_dir,
-                                              'META')
+  output_target_files_meta_dir = os.path.join(source_dir, 'META')
 
   meta_content = files_from_path(output_target_files_meta_dir)
-  other_content = files_from_path(source_dir,
-                                  ['-path', output_target_files_meta_dir,
-                                   '-prune', '-o', '-print'])
+  other_content = files_from_path(
+      source_dir,
+      ['-path', output_target_files_meta_dir, '-prune', '-o', '-print'])
 
   with open(output_target_files_list, 'w') as f:
     f.write(meta_content)
@@ -953,20 +918,6 @@
   return output_zip
 
 
-def create_ota_package(zip_package, output_ota):
-  """Creates OTA package from archived package.
-
-  Args:
-    zip_package: The name of the zip archived package.
-    output_ota: The name of the output zip archive ota package.
-  """
-  ota_from_target_files_args = [
-      zip_package,
-      output_ota,
-  ]
-  ota_from_target_files.main(ota_from_target_files_args)
-
-
 def merge_target_files(temp_dir, framework_target_files, framework_item_list,
                        framework_misc_info_keys, vendor_target_files,
                        vendor_item_list, output_target_files, output_dir,
@@ -1024,7 +975,7 @@
   if output_img:
     # Create the IMG package from the merged target files (before zipping, in
     # order to avoid an unnecessary unzip and copy).
-    create_img_archive(output_target_files_temp_dir, output_img)
+    img_from_target_files.main([output_target_files_temp_dir, output_img])
 
   # Finally, create the output target files zip archive and/or copy the
   # output items to the output target files directory.
@@ -1042,7 +993,7 @@
   # Create the OTA package from the merged target files package.
 
   if output_ota:
-    create_ota_package(output_zip, output_ota)
+    ota_from_target_files.main([output_zip, output_ota])
 
 
 def call_func_with_temp_dir(func, keep_tmp):
@@ -1095,10 +1046,8 @@
     elif o == '--framework-item-list':
       OPTIONS.framework_item_list = a
     elif o == '--system-misc-info-keys':
-      logger.warning(
-          '--system-misc-info-keys has been renamed to '
-          '--framework-misc-info-keys'
-      )
+      logger.warning('--system-misc-info-keys has been renamed to '
+                     '--framework-misc-info-keys')
       OPTIONS.framework_misc_info_keys = a
     elif o == '--framework-misc-info-keys':
       OPTIONS.framework_misc_info_keys = a
@@ -1167,23 +1116,23 @@
     sys.exit(1)
 
   if OPTIONS.framework_item_list:
-    framework_item_list = read_config_list(OPTIONS.framework_item_list)
+    framework_item_list = common.LoadListFromFile(OPTIONS.framework_item_list)
   else:
     framework_item_list = DEFAULT_FRAMEWORK_ITEM_LIST
 
   if OPTIONS.framework_misc_info_keys:
-    framework_misc_info_keys = read_config_list(
+    framework_misc_info_keys = common.LoadListFromFile(
         OPTIONS.framework_misc_info_keys)
   else:
     framework_misc_info_keys = DEFAULT_FRAMEWORK_MISC_INFO_KEYS
 
   if OPTIONS.vendor_item_list:
-    vendor_item_list = read_config_list(OPTIONS.vendor_item_list)
+    vendor_item_list = common.LoadListFromFile(OPTIONS.vendor_item_list)
   else:
     vendor_item_list = DEFAULT_VENDOR_ITEM_LIST
 
   if OPTIONS.output_item_list:
-    output_item_list = read_config_list(OPTIONS.output_item_list)
+    output_item_list = common.LoadListFromFile(OPTIONS.output_item_list)
   else:
     output_item_list = None
 
diff --git a/tools/releasetools/ota_from_target_files.py b/tools/releasetools/ota_from_target_files.py
index 4598317..db7e86c 100755
--- a/tools/releasetools/ota_from_target_files.py
+++ b/tools/releasetools/ota_from_target_files.py
@@ -517,7 +517,7 @@
     """Signs the given input file. Returns the output filename."""
     out_file = common.MakeTempFile(prefix="signed-", suffix=".bin")
     cmd = [self.signer] + self.signer_args + ['-in', in_file, '-out', out_file]
-    common.RunAndCheckOutput(cmd)
+    common.RunAndCheckOutput(cmd, stdout=None, stderr=None)
     return out_file
 
 
@@ -559,7 +559,7 @@
     if source_file is not None:
       cmd.extend(["--source_image", source_file])
     cmd.extend(additional_args)
-    common.RunAndCheckOutput(cmd)
+    common.RunAndCheckOutput(cmd, stdout=None, stderr=None)
 
     self.payload_file = payload_file
     self.payload_properties = None
@@ -583,7 +583,7 @@
            "--signature_size", str(payload_signer.key_size),
            "--metadata_hash_file", metadata_sig_file,
            "--payload_hash_file", payload_sig_file]
-    common.RunAndCheckOutput(cmd)
+    common.RunAndCheckOutput(cmd, stdout=None, stderr=None)
 
     # 2. Sign the hashes.
     signed_payload_sig_file = payload_signer.Sign(payload_sig_file)
@@ -598,7 +598,7 @@
            "--signature_size", str(payload_signer.key_size),
            "--metadata_signature_file", signed_metadata_sig_file,
            "--payload_signature_file", signed_payload_sig_file]
-    common.RunAndCheckOutput(cmd)
+    common.RunAndCheckOutput(cmd, stdout=None, stderr=None)
 
     # 4. Dump the signed payload properties.
     properties_file = common.MakeTempFile(prefix="payload-properties-",
@@ -606,7 +606,7 @@
     cmd = ["brillo_update_payload", "properties",
            "--payload", signed_payload_file,
            "--properties_file", properties_file]
-    common.RunAndCheckOutput(cmd)
+    common.RunAndCheckOutput(cmd, stdout=None, stderr=None)
 
     if self.secondary:
       with open(properties_file, "a") as f:
diff --git a/tools/releasetools/test_blockimgdiff.py b/tools/releasetools/test_blockimgdiff.py
index 4c86933..0987dcf 100644
--- a/tools/releasetools/test_blockimgdiff.py
+++ b/tools/releasetools/test_blockimgdiff.py
@@ -18,9 +18,8 @@
 from hashlib import sha1
 
 import common
-from blockimgdiff import (
-    BlockImageDiff, DataImage, EmptyImage, FileImage, HeapItem, ImgdiffStats,
-    Transfer)
+from blockimgdiff import BlockImageDiff, HeapItem, ImgdiffStats, Transfer
+from images import DataImage, EmptyImage, FileImage
 from rangelib import RangeSet
 from test_utils import ReleaseToolsTestCase
 
diff --git a/tools/releasetools/test_common.py b/tools/releasetools/test_common.py
index 50fa86f..3a2198c 100644
--- a/tools/releasetools/test_common.py
+++ b/tools/releasetools/test_common.py
@@ -25,9 +25,9 @@
 import common
 import test_utils
 import validate_target_files
+from images import EmptyImage, DataImage
 from rangelib import RangeSet
 
-from blockimgdiff import EmptyImage, DataImage
 
 KiB = 1024
 MiB = 1024 * KiB
@@ -912,6 +912,23 @@
       'recovery_as_boot': 'true',
   }
 
+  def test_LoadListFromFile(self):
+    file_path = os.path.join(self.testdata_dir,
+                             'merge_config_framework_item_list')
+    contents = common.LoadListFromFile(file_path)
+    expected_contents = [
+        'META/apkcerts.txt',
+        'META/filesystem_config.txt',
+        'META/root_filesystem_config.txt',
+        'META/system_manifest.xml',
+        'META/system_matrix.xml',
+        'META/update_engine_config.txt',
+        'PRODUCT/*',
+        'ROOT/*',
+        'SYSTEM/*',
+    ]
+    self.assertEqual(sorted(contents), sorted(expected_contents))
+
   @staticmethod
   def _test_LoadInfoDict_createTargetFiles(info_dict, fstab_path):
     target_files = common.MakeTempFile(prefix='target_files-', suffix='.zip')
diff --git a/tools/releasetools/test_merge_target_files.py b/tools/releasetools/test_merge_target_files.py
index bca29e5..1b1c725 100644
--- a/tools/releasetools/test_merge_target_files.py
+++ b/tools/releasetools/test_merge_target_files.py
@@ -18,7 +18,7 @@
 
 import common
 import test_utils
-from merge_target_files import (read_config_list, validate_config_lists,
+from merge_target_files import (validate_config_lists,
                                 DEFAULT_FRAMEWORK_ITEM_LIST,
                                 DEFAULT_VENDOR_ITEM_LIST,
                                 DEFAULT_FRAMEWORK_MISC_INFO_KEYS, copy_items,
@@ -83,24 +83,6 @@
     self.assertEqual(
         os.readlink(os.path.join(output_dir, 'a_link.cpp')), 'a.cpp')
 
-  def test_read_config_list(self):
-    framework_item_list_file = os.path.join(self.testdata_dir,
-                                            'merge_config_framework_item_list')
-    framework_item_list = read_config_list(framework_item_list_file)
-    expected_framework_item_list = [
-        'META/apkcerts.txt',
-        'META/filesystem_config.txt',
-        'META/root_filesystem_config.txt',
-        'META/system_manifest.xml',
-        'META/system_matrix.xml',
-        'META/update_engine_config.txt',
-        'PRODUCT/*',
-        'ROOT/*',
-        'SYSTEM/*',
-    ]
-    self.assertEqual(sorted(framework_item_list),
-                     sorted(expected_framework_item_list))
-
   def test_validate_config_lists_ReturnsFalseIfMissingDefaultItem(self):
     framework_item_list = list(DEFAULT_FRAMEWORK_ITEM_LIST)
     framework_item_list.remove('SYSTEM/*')
diff --git a/tools/warn.py b/tools/warn.py
index 9389b7d..48feb49 100755
--- a/tools/warn.py
+++ b/tools/warn.py
@@ -2816,7 +2816,6 @@
     simple_project_pattern('system/extras/memory_replay'),
     simple_project_pattern('system/extras/mmap-perf'),
     simple_project_pattern('system/extras/multinetwork'),
-    simple_project_pattern('system/extras/perfprofd'),
     simple_project_pattern('system/extras/procrank'),
     simple_project_pattern('system/extras/runconuid'),
     simple_project_pattern('system/extras/showmap'),