diff --git a/tools/releasetools/ota_from_target_files b/tools/releasetools/ota_from_target_files
deleted file mode 100755
index 768f4cb..0000000
--- a/tools/releasetools/ota_from_target_files
+++ /dev/null
@@ -1,1582 +0,0 @@
-#!/usr/bin/env python
-#
-# Copyright (C) 2008 The Android Open Source Project
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-"""
-Given a target-files zipfile, produces an OTA package that installs
-that build.  An incremental OTA is produced if -i is given, otherwise
-a full OTA is produced.
-
-Usage:  ota_from_target_files [flags] input_target_files output_ota_package
-
-  --board_config  <file>
-      Deprecated.
-
-  -k (--package_key) <key> Key to use to sign the package (default is
-      the value of default_system_dev_certificate from the input
-      target-files's META/misc_info.txt, or
-      "build/target/product/security/testkey" if that value is not
-      specified).
-
-      For incremental OTAs, the default value is based on the source
-      target-file, not the target build.
-
-  -i  (--incremental_from)  <file>
-      Generate an incremental OTA using the given target-files zip as
-      the starting build.
-
-  -v  (--verify)
-      Remount and verify the checksums of the files written to the
-      system and vendor (if used) partitions.  Incremental builds only.
-
-  -o  (--oem_settings)  <file>
-      Use the file to specify the expected OEM-specific properties
-      on the OEM partition of the intended device.
-
-  -w  (--wipe_user_data)
-      Generate an OTA package that will wipe the user data partition
-      when installed.
-
-  -n  (--no_prereq)
-      Omit the timestamp prereq check normally included at the top of
-      the build scripts (used for developer OTA packages which
-      legitimately need to go back and forth).
-
-  -e  (--extra_script)  <file>
-      Insert the contents of file at the end of the update script.
-
-  -a  (--aslr_mode)  <on|off>
-      Specify whether to turn on ASLR for the package (on by default).
-
-  -2  (--two_step)
-      Generate a 'two-step' OTA package, where recovery is updated
-      first, so that any changes made to the system partition are done
-      using the new recovery (new kernel, etc.).
-
-  --block
-      Generate a block-based OTA if possible.  Will fall back to a
-      file-based OTA if the target_files is older and doesn't support
-      block-based OTAs.
-
-  -b  (--binary)  <file>
-      Use the given binary as the update-binary in the output package,
-      instead of the binary in the build's target_files.  Use for
-      development only.
-
-  -t  (--worker_threads) <int>
-      Specifies the number of worker-threads that will be used when
-      generating patches for incremental updates (defaults to 3).
-
-"""
-
-import sys
-
-if sys.hexversion < 0x02070000:
-  print >> sys.stderr, "Python 2.7 or newer is required."
-  sys.exit(1)
-
-import copy
-import errno
-import multiprocessing
-import os
-import re
-import subprocess
-import tempfile
-import time
-import zipfile
-
-from hashlib import sha1 as sha1
-
-import common
-import edify_generator
-import build_image
-import blockimgdiff
-import sparse_img
-
-OPTIONS = common.OPTIONS
-OPTIONS.package_key = None
-OPTIONS.incremental_source = None
-OPTIONS.verify = False
-OPTIONS.require_verbatim = set()
-OPTIONS.prohibit_verbatim = set(("system/build.prop",))
-OPTIONS.patch_threshold = 0.95
-OPTIONS.wipe_user_data = False
-OPTIONS.omit_prereq = False
-OPTIONS.extra_script = None
-OPTIONS.aslr_mode = True
-OPTIONS.worker_threads = multiprocessing.cpu_count() // 2
-if OPTIONS.worker_threads == 0:
-  OPTIONS.worker_threads = 1
-OPTIONS.two_step = False
-OPTIONS.no_signing = False
-OPTIONS.block_based = False
-OPTIONS.updater_binary = None
-OPTIONS.oem_source = None
-OPTIONS.fallback_to_full = True
-
-def MostPopularKey(d, default):
-  """Given a dict, return the key corresponding to the largest
-  value.  Returns 'default' if the dict is empty."""
-  x = [(v, k) for (k, v) in d.iteritems()]
-  if not x: return default
-  x.sort()
-  return x[-1][1]
-
-
-def IsSymlink(info):
-  """Return true if the zipfile.ZipInfo object passed in represents a
-  symlink."""
-  return (info.external_attr >> 16) == 0120777
-
-def IsRegular(info):
-  """Return true if the zipfile.ZipInfo object passed in represents a
-  symlink."""
-  return (info.external_attr >> 28) == 010
-
-def ClosestFileMatch(src, tgtfiles, existing):
-  """Returns the closest file match between a source file and list
-     of potential matches.  The exact filename match is preferred,
-     then the sha1 is searched for, and finally a file with the same
-     basename is evaluated.  Rename support in the updater-binary is
-     required for the latter checks to be used."""
-
-  result = tgtfiles.get("path:" + src.name)
-  if result is not None:
-    return result
-
-  if not OPTIONS.target_info_dict.get("update_rename_support", False):
-    return None
-
-  if src.size < 1000:
-    return None
-
-  result = tgtfiles.get("sha1:" + src.sha1)
-  if result is not None and existing.get(result.name) is None:
-    return result
-  result = tgtfiles.get("file:" + src.name.split("/")[-1])
-  if result is not None and existing.get(result.name) is None:
-    return result
-  return None
-
-class ItemSet:
-  def __init__(self, partition, fs_config):
-    self.partition = partition
-    self.fs_config = fs_config
-    self.ITEMS = {}
-
-  def Get(self, name, dir=False):
-    if name not in self.ITEMS:
-      self.ITEMS[name] = Item(self, name, dir=dir)
-    return self.ITEMS[name]
-
-  def GetMetadata(self, input_zip):
-    # The target_files contains a record of what the uid,
-    # gid, and mode are supposed to be.
-    output = input_zip.read(self.fs_config)
-
-    for line in output.split("\n"):
-      if not line: continue
-      columns = line.split()
-      name, uid, gid, mode = columns[:4]
-      selabel = None
-      capabilities = None
-
-      # After the first 4 columns, there are a series of key=value
-      # pairs. Extract out the fields we care about.
-      for element in columns[4:]:
-        key, value = element.split("=")
-        if key == "selabel":
-          selabel = value
-        if key == "capabilities":
-          capabilities = value
-
-      i = self.ITEMS.get(name, None)
-      if i is not None:
-        i.uid = int(uid)
-        i.gid = int(gid)
-        i.mode = int(mode, 8)
-        i.selabel = selabel
-        i.capabilities = capabilities
-        if i.dir:
-          i.children.sort(key=lambda i: i.name)
-
-    # set metadata for the files generated by this script.
-    i = self.ITEMS.get("system/recovery-from-boot.p", None)
-    if i: i.uid, i.gid, i.mode, i.selabel, i.capabilities = 0, 0, 0644, None, None
-    i = self.ITEMS.get("system/etc/install-recovery.sh", None)
-    if i: i.uid, i.gid, i.mode, i.selabel, i.capabilities = 0, 0, 0544, None, None
-
-
-class Item:
-  """Items represent the metadata (user, group, mode) of files and
-  directories in the system image."""
-  def __init__(self, itemset, name, dir=False):
-    self.itemset = itemset
-    self.name = name
-    self.uid = None
-    self.gid = None
-    self.mode = None
-    self.selabel = None
-    self.capabilities = None
-    self.dir = dir
-
-    if name:
-      self.parent = itemset.Get(os.path.dirname(name), dir=True)
-      self.parent.children.append(self)
-    else:
-      self.parent = None
-    if dir:
-      self.children = []
-
-  def Dump(self, indent=0):
-    if self.uid is not None:
-      print "%s%s %d %d %o" % ("  "*indent, self.name, self.uid, self.gid, self.mode)
-    else:
-      print "%s%s %s %s %s" % ("  "*indent, self.name, self.uid, self.gid, self.mode)
-    if self.dir:
-      print "%s%s" % ("  "*indent, self.descendants)
-      print "%s%s" % ("  "*indent, self.best_subtree)
-      for i in self.children:
-        i.Dump(indent=indent+1)
-
-  def CountChildMetadata(self):
-    """Count up the (uid, gid, mode, selabel, capabilities) tuples for
-    all children and determine the best strategy for using set_perm_recursive and
-    set_perm to correctly chown/chmod all the files to their desired
-    values.  Recursively calls itself for all descendants.
-
-    Returns a dict of {(uid, gid, dmode, fmode, selabel, capabilities): count} counting up
-    all descendants of this node.  (dmode or fmode may be None.)  Also
-    sets the best_subtree of each directory Item to the (uid, gid,
-    dmode, fmode, selabel, capabilities) tuple that will match the most
-    descendants of that Item.
-    """
-
-    assert self.dir
-    d = self.descendants = {(self.uid, self.gid, self.mode, None, self.selabel, self.capabilities): 1}
-    for i in self.children:
-      if i.dir:
-        for k, v in i.CountChildMetadata().iteritems():
-          d[k] = d.get(k, 0) + v
-      else:
-        k = (i.uid, i.gid, None, i.mode, i.selabel, i.capabilities)
-        d[k] = d.get(k, 0) + 1
-
-    # Find the (uid, gid, dmode, fmode, selabel, capabilities)
-    # tuple that matches the most descendants.
-
-    # First, find the (uid, gid) pair that matches the most
-    # descendants.
-    ug = {}
-    for (uid, gid, _, _, _, _), count in d.iteritems():
-      ug[(uid, gid)] = ug.get((uid, gid), 0) + count
-    ug = MostPopularKey(ug, (0, 0))
-
-    # Now find the dmode, fmode, selabel, and capabilities that match
-    # the most descendants with that (uid, gid), and choose those.
-    best_dmode = (0, 0755)
-    best_fmode = (0, 0644)
-    best_selabel = (0, None)
-    best_capabilities = (0, None)
-    for k, count in d.iteritems():
-      if k[:2] != ug: continue
-      if k[2] is not None and count >= best_dmode[0]: best_dmode = (count, k[2])
-      if k[3] is not None and count >= best_fmode[0]: best_fmode = (count, k[3])
-      if k[4] is not None and count >= best_selabel[0]: best_selabel = (count, k[4])
-      if k[5] is not None and count >= best_capabilities[0]: best_capabilities = (count, k[5])
-    self.best_subtree = ug + (best_dmode[1], best_fmode[1], best_selabel[1], best_capabilities[1])
-
-    return d
-
-  def SetPermissions(self, script):
-    """Append set_perm/set_perm_recursive commands to 'script' to
-    set all permissions, users, and groups for the tree of files
-    rooted at 'self'."""
-
-    self.CountChildMetadata()
-
-    def recurse(item, current):
-      # current is the (uid, gid, dmode, fmode, selabel, capabilities) tuple that the current
-      # item (and all its children) have already been set to.  We only
-      # need to issue set_perm/set_perm_recursive commands if we're
-      # supposed to be something different.
-      if item.dir:
-        if current != item.best_subtree:
-          script.SetPermissionsRecursive("/"+item.name, *item.best_subtree)
-          current = item.best_subtree
-
-        if item.uid != current[0] or item.gid != current[1] or \
-           item.mode != current[2] or item.selabel != current[4] or \
-           item.capabilities != current[5]:
-          script.SetPermissions("/"+item.name, item.uid, item.gid,
-                                item.mode, item.selabel, item.capabilities)
-
-        for i in item.children:
-          recurse(i, current)
-      else:
-        if item.uid != current[0] or item.gid != current[1] or \
-               item.mode != current[3] or item.selabel != current[4] or \
-               item.capabilities != current[5]:
-          script.SetPermissions("/"+item.name, item.uid, item.gid,
-                                item.mode, item.selabel, item.capabilities)
-
-    recurse(self, (-1, -1, -1, -1, None, None))
-
-
-def CopyPartitionFiles(itemset, input_zip, output_zip=None, substitute=None):
-  """Copies files for the partition in the input zip to the output
-  zip.  Populates the Item class with their metadata, and returns a
-  list of symlinks.  output_zip may be None, in which case the copy is
-  skipped (but the other side effects still happen).  substitute is an
-  optional dict of {output filename: contents} to be output instead of
-  certain input files.
-  """
-
-  symlinks = []
-
-  partition = itemset.partition
-
-  for info in input_zip.infolist():
-    if info.filename.startswith(partition.upper() + "/"):
-      basefilename = info.filename[7:]
-      if IsSymlink(info):
-        symlinks.append((input_zip.read(info.filename),
-                         "/" + partition + "/" + basefilename))
-      else:
-        info2 = copy.copy(info)
-        fn = info2.filename = partition + "/" + basefilename
-        if substitute and fn in substitute and substitute[fn] is None:
-          continue
-        if output_zip is not None:
-          if substitute and fn in substitute:
-            data = substitute[fn]
-          else:
-            data = input_zip.read(info.filename)
-          output_zip.writestr(info2, data)
-        if fn.endswith("/"):
-          itemset.Get(fn[:-1], dir=True)
-        else:
-          itemset.Get(fn, dir=False)
-
-  symlinks.sort()
-  return symlinks
-
-
-def SignOutput(temp_zip_name, output_zip_name):
-  key_passwords = common.GetKeyPasswords([OPTIONS.package_key])
-  pw = key_passwords[OPTIONS.package_key]
-
-  common.SignFile(temp_zip_name, output_zip_name, OPTIONS.package_key, pw,
-                  whole_file=True)
-
-
-def AppendAssertions(script, info_dict, oem_dict = None):
-  oem_props = info_dict.get("oem_fingerprint_properties")
-  if oem_props is None or len(oem_props) == 0:
-    device = GetBuildProp("ro.product.device", info_dict)
-    script.AssertDevice(device)
-  else:
-    if oem_dict is None:
-      raise common.ExternalError("No OEM file provided to answer expected assertions")
-    for prop in oem_props.split():
-      if oem_dict.get(prop) is None:
-        raise common.ExternalError("The OEM file is missing the property %s" % prop)
-      script.AssertOemProperty(prop, oem_dict.get(prop))
-
-
-def HasRecoveryPatch(target_files_zip):
-  try:
-    target_files_zip.getinfo("SYSTEM/recovery-from-boot.p")
-    return True
-  except KeyError:
-    return False
-
-def HasVendorPartition(target_files_zip):
-  try:
-    target_files_zip.getinfo("VENDOR/")
-    return True
-  except KeyError:
-    return False
-
-def GetOemProperty(name, oem_props, oem_dict, info_dict):
-  if oem_props is not None and name in oem_props:
-    return oem_dict[name]
-  return GetBuildProp(name, info_dict)
-
-
-def CalculateFingerprint(oem_props, oem_dict, info_dict):
-  if oem_props is None:
-    return GetBuildProp("ro.build.fingerprint", info_dict)
-  return "%s/%s/%s:%s" % (
-    GetOemProperty("ro.product.brand", oem_props, oem_dict, info_dict),
-    GetOemProperty("ro.product.name", oem_props, oem_dict, info_dict),
-    GetOemProperty("ro.product.device", oem_props, oem_dict, info_dict),
-    GetBuildProp("ro.build.thumbprint", info_dict))
-
-
-def GetImage(which, tmpdir, info_dict):
-  # Return an image object (suitable for passing to BlockImageDiff)
-  # for the 'which' partition (most be "system" or "vendor").  If a
-  # prebuilt image and file map are found in tmpdir they are used,
-  # otherwise they are reconstructed from the individual files.
-
-  assert which in ("system", "vendor")
-
-  path = os.path.join(tmpdir, "IMAGES", which + ".img")
-  mappath = os.path.join(tmpdir, "IMAGES", which + ".map")
-  if os.path.exists(path) and os.path.exists(mappath):
-    print "using %s.img from target-files" % (which,)
-    # This is a 'new' target-files, which already has the image in it.
-
-  else:
-    print "building %s.img from target-files" % (which,)
-
-    # This is an 'old' target-files, which does not contain images
-    # already built.  Build them.
-
-    mappath = tempfile.mkstemp()[1]
-    OPTIONS.tempfiles.append(mappath)
-
-    import add_img_to_target_files
-    if which == "system":
-      path = add_img_to_target_files.BuildSystem(
-          tmpdir, info_dict, block_list=mappath)
-    elif which == "vendor":
-      path = add_img_to_target_files.BuildVendor(
-          tmpdir, info_dict, block_list=mappath)
-
-  # Bug: http://b/20939131
-  # In ext4 filesystems, block 0 might be changed even being mounted
-  # R/O. We add it to clobbered_blocks so that it will be written to the
-  # target unconditionally. Note that they are still part of care_map.
-  clobbered_blocks = "0"
-
-  return sparse_img.SparseImage(path, mappath, clobbered_blocks)
-
-
-def WriteFullOTAPackage(input_zip, output_zip):
-  # TODO: how to determine this?  We don't know what version it will
-  # be installed on top of.  For now, we expect the API just won't
-  # change very often.
-  script = edify_generator.EdifyGenerator(3, OPTIONS.info_dict)
-
-  oem_props = OPTIONS.info_dict.get("oem_fingerprint_properties")
-  recovery_mount_options = OPTIONS.info_dict.get("recovery_mount_options")
-  oem_dict = None
-  if oem_props is not None and len(oem_props) > 0:
-    if OPTIONS.oem_source is None:
-      raise common.ExternalError("OEM source required for this build")
-    script.Mount("/oem", recovery_mount_options)
-    oem_dict = common.LoadDictionaryFromLines(open(OPTIONS.oem_source).readlines())
-
-  metadata = {"post-build": CalculateFingerprint(
-                               oem_props, oem_dict, OPTIONS.info_dict),
-              "pre-device": GetOemProperty("ro.product.device", oem_props, oem_dict,
-                                         OPTIONS.info_dict),
-              "post-timestamp": GetBuildProp("ro.build.date.utc",
-                                             OPTIONS.info_dict),
-              }
-
-  device_specific = common.DeviceSpecificParams(
-      input_zip=input_zip,
-      input_version=OPTIONS.info_dict["recovery_api_version"],
-      output_zip=output_zip,
-      script=script,
-      input_tmp=OPTIONS.input_tmp,
-      metadata=metadata,
-      info_dict=OPTIONS.info_dict)
-
-  has_recovery_patch = HasRecoveryPatch(input_zip)
-  block_based = OPTIONS.block_based and has_recovery_patch
-
-  if not OPTIONS.omit_prereq:
-    ts = GetBuildProp("ro.build.date.utc", OPTIONS.info_dict)
-    ts_text = GetBuildProp("ro.build.date", OPTIONS.info_dict)
-    script.AssertOlderBuild(ts, ts_text)
-
-  AppendAssertions(script, OPTIONS.info_dict, oem_dict)
-  device_specific.FullOTA_Assertions()
-
-  # Two-step package strategy (in chronological order, which is *not*
-  # the order in which the generated script has things):
-  #
-  # if stage is not "2/3" or "3/3":
-  #    write recovery image to boot partition
-  #    set stage to "2/3"
-  #    reboot to boot partition and restart recovery
-  # else if stage is "2/3":
-  #    write recovery image to recovery partition
-  #    set stage to "3/3"
-  #    reboot to recovery partition and restart recovery
-  # else:
-  #    (stage must be "3/3")
-  #    set stage to ""
-  #    do normal full package installation:
-  #       wipe and install system, boot image, etc.
-  #       set up system to update recovery partition on first boot
-  #    complete script normally (allow recovery to mark itself finished and reboot)
-
-  recovery_img = common.GetBootableImage("recovery.img", "recovery.img",
-                                         OPTIONS.input_tmp, "RECOVERY")
-  if OPTIONS.two_step:
-    if not OPTIONS.info_dict.get("multistage_support", None):
-      assert False, "two-step packages not supported by this build"
-    fs = OPTIONS.info_dict["fstab"]["/misc"]
-    assert fs.fs_type.upper() == "EMMC", \
-        "two-step packages only supported on devices with EMMC /misc partitions"
-    bcb_dev = {"bcb_dev": fs.device}
-    common.ZipWriteStr(output_zip, "recovery.img", recovery_img.data)
-    script.AppendExtra("""
-if get_stage("%(bcb_dev)s") == "2/3" then
-""" % bcb_dev)
-    script.WriteRawImage("/recovery", "recovery.img")
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "3/3");
-reboot_now("%(bcb_dev)s", "recovery");
-else if get_stage("%(bcb_dev)s") == "3/3" then
-""" % bcb_dev)
-
-  device_specific.FullOTA_InstallBegin()
-
-  system_progress = 0.75
-
-  if OPTIONS.wipe_user_data:
-    system_progress -= 0.1
-  if HasVendorPartition(input_zip):
-    system_progress -= 0.1
-
-  if "selinux_fc" in OPTIONS.info_dict:
-    WritePolicyConfig(OPTIONS.info_dict["selinux_fc"], output_zip)
-
-  recovery_mount_options = OPTIONS.info_dict.get("recovery_mount_options")
-
-  system_items = ItemSet("system", "META/filesystem_config.txt")
-  script.ShowProgress(system_progress, 0)
-
-  if block_based:
-    # Full OTA is done as an "incremental" against an empty source
-    # image.  This has the effect of writing new data from the package
-    # to the entire partition, but lets us reuse the updater code that
-    # writes incrementals to do it.
-    system_tgt = GetImage("system", OPTIONS.input_tmp, OPTIONS.info_dict)
-    system_tgt.ResetFileMap()
-    system_diff = common.BlockDifference("system", system_tgt, src=None)
-    system_diff.WriteScript(script, output_zip)
-  else:
-    script.FormatPartition("/system")
-    script.Mount("/system", recovery_mount_options)
-    if not has_recovery_patch:
-      script.UnpackPackageDir("recovery", "/system")
-    script.UnpackPackageDir("system", "/system")
-
-    symlinks = CopyPartitionFiles(system_items, input_zip, output_zip)
-    script.MakeSymlinks(symlinks)
-
-  boot_img = common.GetBootableImage("boot.img", "boot.img",
-                                     OPTIONS.input_tmp, "BOOT")
-
-  if not block_based:
-    def output_sink(fn, data):
-      common.ZipWriteStr(output_zip, "recovery/" + fn, data)
-      system_items.Get("system/" + fn, dir=False)
-
-    common.MakeRecoveryPatch(OPTIONS.input_tmp, output_sink,
-                             recovery_img, boot_img)
-
-    system_items.GetMetadata(input_zip)
-    system_items.Get("system").SetPermissions(script)
-
-  if HasVendorPartition(input_zip):
-    vendor_items = ItemSet("vendor", "META/vendor_filesystem_config.txt")
-    script.ShowProgress(0.1, 0)
-
-    if block_based:
-      vendor_tgt = GetImage("vendor", OPTIONS.input_tmp, OPTIONS.info_dict)
-      vendor_tgt.ResetFileMap()
-      vendor_diff = common.BlockDifference("vendor", vendor_tgt)
-      vendor_diff.WriteScript(script, output_zip)
-    else:
-      script.FormatPartition("/vendor")
-      script.Mount("/vendor", recovery_mount_options)
-      script.UnpackPackageDir("vendor", "/vendor")
-
-      symlinks = CopyPartitionFiles(vendor_items, input_zip, output_zip)
-      script.MakeSymlinks(symlinks)
-
-      vendor_items.GetMetadata(input_zip)
-      vendor_items.Get("vendor").SetPermissions(script)
-
-  common.CheckSize(boot_img.data, "boot.img", OPTIONS.info_dict)
-  common.ZipWriteStr(output_zip, "boot.img", boot_img.data)
-
-  script.ShowProgress(0.05, 5)
-  script.WriteRawImage("/boot", "boot.img")
-
-  script.ShowProgress(0.2, 10)
-  device_specific.FullOTA_InstallEnd()
-
-  if OPTIONS.extra_script is not None:
-    script.AppendExtra(OPTIONS.extra_script)
-
-  script.UnmountAll()
-
-  if OPTIONS.wipe_user_data:
-    script.ShowProgress(0.1, 10)
-    script.FormatPartition("/data")
-
-  if OPTIONS.two_step:
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "");
-""" % bcb_dev)
-    script.AppendExtra("else\n")
-    script.WriteRawImage("/boot", "recovery.img")
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "2/3");
-reboot_now("%(bcb_dev)s", "");
-endif;
-endif;
-""" % bcb_dev)
-  script.AddToZip(input_zip, output_zip, input_path=OPTIONS.updater_binary)
-  WriteMetadata(metadata, output_zip)
-
-
-def WritePolicyConfig(file_context, output_zip):
-  f = open(file_context, 'r');
-  basename = os.path.basename(file_context)
-  common.ZipWriteStr(output_zip, basename, f.read())
-
-
-def WriteMetadata(metadata, output_zip):
-  common.ZipWriteStr(output_zip, "META-INF/com/android/metadata",
-                     "".join(["%s=%s\n" % kv
-                              for kv in sorted(metadata.iteritems())]))
-
-
-def LoadPartitionFiles(z, partition):
-  """Load all the files from the given partition in a given target-files
-  ZipFile, and return a dict of {filename: File object}."""
-  out = {}
-  prefix = partition.upper() + "/"
-  for info in z.infolist():
-    if info.filename.startswith(prefix) and not IsSymlink(info):
-      basefilename = info.filename[7:]
-      fn = partition + "/" + basefilename
-      data = z.read(info.filename)
-      out[fn] = common.File(fn, data)
-  return out
-
-
-def GetBuildProp(prop, info_dict):
-  """Return the fingerprint of the build of a given target-files info_dict."""
-  try:
-    return info_dict.get("build.prop", {})[prop]
-  except KeyError:
-    raise common.ExternalError("couldn't find %s in build.prop" % (prop,))
-
-
-def AddToKnownPaths(filename, known_paths):
-  if filename[-1] == "/":
-    return
-  dirs = filename.split("/")[:-1]
-  while len(dirs) > 0:
-    path = "/".join(dirs)
-    if path in known_paths:
-      break;
-    known_paths.add(path)
-    dirs.pop()
-
-
-def WriteBlockIncrementalOTAPackage(target_zip, source_zip, output_zip):
-  source_version = OPTIONS.source_info_dict["recovery_api_version"]
-  target_version = OPTIONS.target_info_dict["recovery_api_version"]
-
-  if source_version == 0:
-    print ("WARNING: generating edify script for a source that "
-           "can't install it.")
-  script = edify_generator.EdifyGenerator(source_version,
-                                          OPTIONS.target_info_dict)
-
-  metadata = {"pre-device": GetBuildProp("ro.product.device",
-                                         OPTIONS.source_info_dict),
-              "post-timestamp": GetBuildProp("ro.build.date.utc",
-                                             OPTIONS.target_info_dict),
-              }
-
-  device_specific = common.DeviceSpecificParams(
-      source_zip=source_zip,
-      source_version=source_version,
-      target_zip=target_zip,
-      target_version=target_version,
-      output_zip=output_zip,
-      script=script,
-      metadata=metadata,
-      info_dict=OPTIONS.info_dict)
-
-  source_fp = GetBuildProp("ro.build.fingerprint", OPTIONS.source_info_dict)
-  target_fp = GetBuildProp("ro.build.fingerprint", OPTIONS.target_info_dict)
-  metadata["pre-build"] = source_fp
-  metadata["post-build"] = target_fp
-
-  source_boot = common.GetBootableImage(
-      "/tmp/boot.img", "boot.img", OPTIONS.source_tmp, "BOOT",
-      OPTIONS.source_info_dict)
-  target_boot = common.GetBootableImage(
-      "/tmp/boot.img", "boot.img", OPTIONS.target_tmp, "BOOT")
-  updating_boot = (not OPTIONS.two_step and
-                   (source_boot.data != target_boot.data))
-
-  source_recovery = common.GetBootableImage(
-      "/tmp/recovery.img", "recovery.img", OPTIONS.source_tmp, "RECOVERY",
-      OPTIONS.source_info_dict)
-  target_recovery = common.GetBootableImage(
-      "/tmp/recovery.img", "recovery.img", OPTIONS.target_tmp, "RECOVERY")
-  updating_recovery = (source_recovery.data != target_recovery.data)
-
-  system_src = GetImage("system", OPTIONS.source_tmp, OPTIONS.source_info_dict)
-  system_tgt = GetImage("system", OPTIONS.target_tmp, OPTIONS.target_info_dict)
-
-  blockimgdiff_version = 1
-  if OPTIONS.info_dict:
-    blockimgdiff_version = max(
-        int(i) for i in
-        OPTIONS.info_dict.get("blockimgdiff_versions", "1").split(","))
-
-  system_diff = common.BlockDifference("system", system_tgt, system_src,
-                                       check_first_block=False,
-                                       version=blockimgdiff_version)
-
-  if HasVendorPartition(target_zip):
-    if not HasVendorPartition(source_zip):
-      raise RuntimeError("can't generate incremental that adds /vendor")
-    vendor_src = GetImage("vendor", OPTIONS.source_tmp, OPTIONS.source_info_dict)
-    vendor_tgt = GetImage("vendor", OPTIONS.target_tmp, OPTIONS.target_info_dict)
-    vendor_diff = common.BlockDifference("vendor", vendor_tgt, vendor_src,
-                                         check_first_block=False,
-                                         version=blockimgdiff_version)
-  else:
-    vendor_diff = None
-
-  oem_props = OPTIONS.target_info_dict.get("oem_fingerprint_properties")
-  recovery_mount_options = OPTIONS.target_info_dict.get("recovery_mount_options")
-  oem_dict = None
-  if oem_props is not None and len(oem_props) > 0:
-    if OPTIONS.oem_source is None:
-      raise common.ExternalError("OEM source required for this build")
-    script.Mount("/oem", recovery_mount_options)
-    oem_dict = common.LoadDictionaryFromLines(open(OPTIONS.oem_source).readlines())
-
-  AppendAssertions(script, OPTIONS.target_info_dict, oem_dict)
-  device_specific.IncrementalOTA_Assertions()
-
-  # Two-step incremental package strategy (in chronological order,
-  # which is *not* the order in which the generated script has
-  # things):
-  #
-  # if stage is not "2/3" or "3/3":
-  #    do verification on current system
-  #    write recovery image to boot partition
-  #    set stage to "2/3"
-  #    reboot to boot partition and restart recovery
-  # else if stage is "2/3":
-  #    write recovery image to recovery partition
-  #    set stage to "3/3"
-  #    reboot to recovery partition and restart recovery
-  # else:
-  #    (stage must be "3/3")
-  #    perform update:
-  #       patch system files, etc.
-  #       force full install of new boot image
-  #       set up system to update recovery partition on first boot
-  #    complete script normally (allow recovery to mark itself finished and reboot)
-
-  if OPTIONS.two_step:
-    if not OPTIONS.info_dict.get("multistage_support", None):
-      assert False, "two-step packages not supported by this build"
-    fs = OPTIONS.info_dict["fstab"]["/misc"]
-    assert fs.fs_type.upper() == "EMMC", \
-        "two-step packages only supported on devices with EMMC /misc partitions"
-    bcb_dev = {"bcb_dev": fs.device}
-    common.ZipWriteStr(output_zip, "recovery.img", target_recovery.data)
-    script.AppendExtra("""
-if get_stage("%(bcb_dev)s") == "2/3" then
-""" % bcb_dev)
-    script.AppendExtra("sleep(20);\n");
-    script.WriteRawImage("/recovery", "recovery.img")
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "3/3");
-reboot_now("%(bcb_dev)s", "recovery");
-else if get_stage("%(bcb_dev)s") != "3/3" then
-""" % bcb_dev)
-
-  script.Print("Verifying current system...")
-
-  device_specific.IncrementalOTA_VerifyBegin()
-
-  if oem_props is None:
-    # When blockimgdiff version is less than 3 (non-resumable block-based OTA),
-    # patching on a device that's already on the target build will damage the
-    # system. Because operations like move don't check the block state, they
-    # always apply the changes unconditionally.
-    if blockimgdiff_version <= 2:
-      script.AssertSomeFingerprint(source_fp)
-    else:
-      script.AssertSomeFingerprint(source_fp, target_fp)
-  else:
-    if blockimgdiff_version <= 2:
-      script.AssertSomeThumbprint(
-          GetBuildProp("ro.build.thumbprint", OPTIONS.source_info_dict))
-    else:
-      script.AssertSomeThumbprint(
-          GetBuildProp("ro.build.thumbprint", OPTIONS.target_info_dict),
-          GetBuildProp("ro.build.thumbprint", OPTIONS.source_info_dict))
-
-  if updating_boot:
-    boot_type, boot_device = common.GetTypeAndDevice("/boot", OPTIONS.info_dict)
-    d = common.Difference(target_boot, source_boot)
-    _, _, d = d.ComputePatch()
-    if d is None:
-      include_full_boot = True
-      common.ZipWriteStr(output_zip, "boot.img", target_boot.data)
-    else:
-      include_full_boot = False
-
-      print "boot      target: %d  source: %d  diff: %d" % (
-          target_boot.size, source_boot.size, len(d))
-
-      common.ZipWriteStr(output_zip, "patch/boot.img.p", d)
-
-      script.PatchCheck("%s:%s:%d:%s:%d:%s" %
-                        (boot_type, boot_device,
-                         source_boot.size, source_boot.sha1,
-                         target_boot.size, target_boot.sha1))
-
-  device_specific.IncrementalOTA_VerifyEnd()
-
-  if OPTIONS.two_step:
-    script.WriteRawImage("/boot", "recovery.img")
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "2/3");
-reboot_now("%(bcb_dev)s", "");
-else
-""" % bcb_dev)
-
-  # Verify the existing partitions.
-  system_diff.WriteVerifyScript(script)
-  if vendor_diff:
-    vendor_diff.WriteVerifyScript(script)
-
-  script.Comment("---- start making changes here ----")
-
-  device_specific.IncrementalOTA_InstallBegin()
-
-  system_diff.WriteScript(script, output_zip,
-                          progress=0.8 if vendor_diff else 0.9)
-  if vendor_diff:
-    vendor_diff.WriteScript(script, output_zip, progress=0.1)
-
-  if OPTIONS.two_step:
-    common.ZipWriteStr(output_zip, "boot.img", target_boot.data)
-    script.WriteRawImage("/boot", "boot.img")
-    print "writing full boot image (forced by two-step mode)"
-
-  if not OPTIONS.two_step:
-    if updating_boot:
-      if include_full_boot:
-        print "boot image changed; including full."
-        script.Print("Installing boot image...")
-        script.WriteRawImage("/boot", "boot.img")
-      else:
-        # Produce the boot image by applying a patch to the current
-        # contents of the boot partition, and write it back to the
-        # partition.
-        print "boot image changed; including patch."
-        script.Print("Patching boot image...")
-        script.ShowProgress(0.1, 10)
-        script.ApplyPatch("%s:%s:%d:%s:%d:%s"
-                          % (boot_type, boot_device,
-                             source_boot.size, source_boot.sha1,
-                             target_boot.size, target_boot.sha1),
-                          "-",
-                          target_boot.size, target_boot.sha1,
-                          source_boot.sha1, "patch/boot.img.p")
-    else:
-      print "boot image unchanged; skipping."
-
-  # Do device-specific installation (eg, write radio image).
-  device_specific.IncrementalOTA_InstallEnd()
-
-  if OPTIONS.extra_script is not None:
-    script.AppendExtra(OPTIONS.extra_script)
-
-  if OPTIONS.wipe_user_data:
-    script.Print("Erasing user data...")
-    script.FormatPartition("/data")
-
-  if OPTIONS.two_step:
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "");
-endif;
-endif;
-""" % bcb_dev)
-
-  script.SetProgress(1)
-  script.AddToZip(target_zip, output_zip, input_path=OPTIONS.updater_binary)
-  WriteMetadata(metadata, output_zip)
-
-
-class FileDifference:
-  def __init__(self, partition, source_zip, target_zip, output_zip):
-    print "Loading target..."
-    self.target_data = target_data = LoadPartitionFiles(target_zip, partition)
-    print "Loading source..."
-    self.source_data = source_data = LoadPartitionFiles(source_zip, partition)
-
-    self.verbatim_targets = verbatim_targets = []
-    self.patch_list = patch_list = []
-    diffs = []
-    self.renames = renames = {}
-    known_paths = set()
-    largest_source_size = 0
-
-    matching_file_cache = {}
-    for fn, sf in source_data.items():
-      assert fn == sf.name
-      matching_file_cache["path:" + fn] = sf
-      if fn in target_data.keys():
-        AddToKnownPaths(fn, known_paths)
-      # Only allow eligibility for filename/sha matching
-      # if there isn't a perfect path match.
-      if target_data.get(sf.name) is None:
-        matching_file_cache["file:" + fn.split("/")[-1]] = sf
-        matching_file_cache["sha:" + sf.sha1] = sf
-
-    for fn in sorted(target_data.keys()):
-      tf = target_data[fn]
-      assert fn == tf.name
-      sf = ClosestFileMatch(tf, matching_file_cache, renames)
-      if sf is not None and sf.name != tf.name:
-        print "File has moved from " + sf.name + " to " + tf.name
-        renames[sf.name] = tf
-
-      if sf is None or fn in OPTIONS.require_verbatim:
-        # This file should be included verbatim
-        if fn in OPTIONS.prohibit_verbatim:
-          raise common.ExternalError("\"%s\" must be sent verbatim" % (fn,))
-        print "send", fn, "verbatim"
-        tf.AddToZip(output_zip)
-        verbatim_targets.append((fn, tf.size, tf.sha1))
-        if fn in target_data.keys():
-          AddToKnownPaths(fn, known_paths)
-      elif tf.sha1 != sf.sha1:
-        # File is different; consider sending as a patch
-        diffs.append(common.Difference(tf, sf))
-      else:
-        # Target file data identical to source (may still be renamed)
-        pass
-
-    common.ComputeDifferences(diffs)
-
-    for diff in diffs:
-      tf, sf, d = diff.GetPatch()
-      path = "/".join(tf.name.split("/")[:-1])
-      if d is None or len(d) > tf.size * OPTIONS.patch_threshold or \
-          path not in known_paths:
-        # patch is almost as big as the file; don't bother patching
-        # or a patch + rename cannot take place due to the target
-        # directory not existing
-        tf.AddToZip(output_zip)
-        verbatim_targets.append((tf.name, tf.size, tf.sha1))
-        if sf.name in renames:
-          del renames[sf.name]
-        AddToKnownPaths(tf.name, known_paths)
-      else:
-        common.ZipWriteStr(output_zip, "patch/" + sf.name + ".p", d)
-        patch_list.append((tf, sf, tf.size, common.sha1(d).hexdigest()))
-        largest_source_size = max(largest_source_size, sf.size)
-
-    self.largest_source_size = largest_source_size
-
-  def EmitVerification(self, script):
-    so_far = 0
-    for tf, sf, size, patch_sha in self.patch_list:
-      if tf.name != sf.name:
-        script.SkipNextActionIfTargetExists(tf.name, tf.sha1)
-      script.PatchCheck("/"+sf.name, tf.sha1, sf.sha1)
-      so_far += sf.size
-    return so_far
-
-  def EmitExplicitTargetVerification(self, script):
-    for fn, size, sha1 in self.verbatim_targets:
-      if (fn[-1] != "/"):
-        script.FileCheck("/"+fn, sha1)
-    for tf, _, _, _ in self.patch_list:
-      script.FileCheck(tf.name, tf.sha1)
-
-  def RemoveUnneededFiles(self, script, extras=()):
-    script.DeleteFiles(["/"+i[0] for i in self.verbatim_targets] +
-                       ["/"+i for i in sorted(self.source_data)
-                              if i not in self.target_data and
-                              i not in self.renames] +
-                       list(extras))
-
-  def TotalPatchSize(self):
-    return sum(i[1].size for i in self.patch_list)
-
-  def EmitPatches(self, script, total_patch_size, so_far):
-    self.deferred_patch_list = deferred_patch_list = []
-    for item in self.patch_list:
-      tf, sf, size, _ = item
-      if tf.name == "system/build.prop":
-        deferred_patch_list.append(item)
-        continue
-      if (sf.name != tf.name):
-        script.SkipNextActionIfTargetExists(tf.name, tf.sha1)
-      script.ApplyPatch("/"+sf.name, "-", tf.size, tf.sha1, sf.sha1, "patch/"+sf.name+".p")
-      so_far += tf.size
-      script.SetProgress(so_far / total_patch_size)
-    return so_far
-
-  def EmitDeferredPatches(self, script):
-    for item in self.deferred_patch_list:
-      tf, sf, size, _ = item
-      script.ApplyPatch("/"+sf.name, "-", tf.size, tf.sha1, sf.sha1, "patch/"+sf.name+".p")
-    script.SetPermissions("/system/build.prop", 0, 0, 0644, None, None)
-
-  def EmitRenames(self, script):
-    if len(self.renames) > 0:
-      script.Print("Renaming files...")
-      for src, tgt in self.renames.iteritems():
-        print "Renaming " + src + " to " + tgt.name
-        script.RenameFile(src, tgt.name)
-
-
-
-
-def WriteIncrementalOTAPackage(target_zip, source_zip, output_zip):
-  target_has_recovery_patch = HasRecoveryPatch(target_zip)
-  source_has_recovery_patch = HasRecoveryPatch(source_zip)
-
-  if (OPTIONS.block_based and
-      target_has_recovery_patch and
-      source_has_recovery_patch):
-    return WriteBlockIncrementalOTAPackage(target_zip, source_zip, output_zip)
-
-  source_version = OPTIONS.source_info_dict["recovery_api_version"]
-  target_version = OPTIONS.target_info_dict["recovery_api_version"]
-
-  if source_version == 0:
-    print ("WARNING: generating edify script for a source that "
-           "can't install it.")
-  script = edify_generator.EdifyGenerator(source_version,
-                                          OPTIONS.target_info_dict)
-
-  oem_props = OPTIONS.info_dict.get("oem_fingerprint_properties")
-  recovery_mount_options = OPTIONS.info_dict.get("recovery_mount_options")
-  oem_dict = None
-  if oem_props is not None and len(oem_props) > 0:
-    if OPTIONS.oem_source is None:
-      raise common.ExternalError("OEM source required for this build")
-    script.Mount("/oem", recovery_mount_options)
-    oem_dict = common.LoadDictionaryFromLines(open(OPTIONS.oem_source).readlines())
-
-  metadata = {"pre-device": GetOemProperty("ro.product.device", oem_props, oem_dict,
-                                         OPTIONS.source_info_dict),
-              "post-timestamp": GetBuildProp("ro.build.date.utc",
-                                             OPTIONS.target_info_dict),
-              }
-
-  device_specific = common.DeviceSpecificParams(
-      source_zip=source_zip,
-      source_version=source_version,
-      target_zip=target_zip,
-      target_version=target_version,
-      output_zip=output_zip,
-      script=script,
-      metadata=metadata,
-      info_dict=OPTIONS.info_dict)
-
-  system_diff = FileDifference("system", source_zip, target_zip, output_zip)
-  script.Mount("/system", recovery_mount_options)
-  if HasVendorPartition(target_zip):
-    vendor_diff = FileDifference("vendor", source_zip, target_zip, output_zip)
-    script.Mount("/vendor", recovery_mount_options)
-  else:
-    vendor_diff = None
-
-  target_fp = CalculateFingerprint(oem_props, oem_dict, OPTIONS.target_info_dict)
-  source_fp = CalculateFingerprint(oem_props, oem_dict, OPTIONS.source_info_dict)
-
-  if oem_props is None:
-    script.AssertSomeFingerprint(source_fp, target_fp)
-  else:
-    script.AssertSomeThumbprint(
-        GetBuildProp("ro.build.thumbprint", OPTIONS.target_info_dict),
-        GetBuildProp("ro.build.thumbprint", OPTIONS.source_info_dict))
-
-  metadata["pre-build"] = source_fp
-  metadata["post-build"] = target_fp
-
-  source_boot = common.GetBootableImage(
-      "/tmp/boot.img", "boot.img", OPTIONS.source_tmp, "BOOT",
-      OPTIONS.source_info_dict)
-  target_boot = common.GetBootableImage(
-      "/tmp/boot.img", "boot.img", OPTIONS.target_tmp, "BOOT")
-  updating_boot = (not OPTIONS.two_step and
-                   (source_boot.data != target_boot.data))
-
-  source_recovery = common.GetBootableImage(
-      "/tmp/recovery.img", "recovery.img", OPTIONS.source_tmp, "RECOVERY",
-      OPTIONS.source_info_dict)
-  target_recovery = common.GetBootableImage(
-      "/tmp/recovery.img", "recovery.img", OPTIONS.target_tmp, "RECOVERY")
-  updating_recovery = (source_recovery.data != target_recovery.data)
-
-  # Here's how we divide up the progress bar:
-  #  0.1 for verifying the start state (PatchCheck calls)
-  #  0.8 for applying patches (ApplyPatch calls)
-  #  0.1 for unpacking verbatim files, symlinking, and doing the
-  #      device-specific commands.
-
-  AppendAssertions(script, OPTIONS.target_info_dict, oem_dict)
-  device_specific.IncrementalOTA_Assertions()
-
-  # Two-step incremental package strategy (in chronological order,
-  # which is *not* the order in which the generated script has
-  # things):
-  #
-  # if stage is not "2/3" or "3/3":
-  #    do verification on current system
-  #    write recovery image to boot partition
-  #    set stage to "2/3"
-  #    reboot to boot partition and restart recovery
-  # else if stage is "2/3":
-  #    write recovery image to recovery partition
-  #    set stage to "3/3"
-  #    reboot to recovery partition and restart recovery
-  # else:
-  #    (stage must be "3/3")
-  #    perform update:
-  #       patch system files, etc.
-  #       force full install of new boot image
-  #       set up system to update recovery partition on first boot
-  #    complete script normally (allow recovery to mark itself finished and reboot)
-
-  if OPTIONS.two_step:
-    if not OPTIONS.info_dict.get("multistage_support", None):
-      assert False, "two-step packages not supported by this build"
-    fs = OPTIONS.info_dict["fstab"]["/misc"]
-    assert fs.fs_type.upper() == "EMMC", \
-        "two-step packages only supported on devices with EMMC /misc partitions"
-    bcb_dev = {"bcb_dev": fs.device}
-    common.ZipWriteStr(output_zip, "recovery.img", target_recovery.data)
-    script.AppendExtra("""
-if get_stage("%(bcb_dev)s") == "2/3" then
-""" % bcb_dev)
-    script.AppendExtra("sleep(20);\n");
-    script.WriteRawImage("/recovery", "recovery.img")
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "3/3");
-reboot_now("%(bcb_dev)s", "recovery");
-else if get_stage("%(bcb_dev)s") != "3/3" then
-""" % bcb_dev)
-
-  script.Print("Verifying current system...")
-
-  device_specific.IncrementalOTA_VerifyBegin()
-
-  script.ShowProgress(0.1, 0)
-  so_far = system_diff.EmitVerification(script)
-  if vendor_diff:
-    so_far += vendor_diff.EmitVerification(script)
-
-  if updating_boot:
-    d = common.Difference(target_boot, source_boot)
-    _, _, d = d.ComputePatch()
-    print "boot      target: %d  source: %d  diff: %d" % (
-        target_boot.size, source_boot.size, len(d))
-
-    common.ZipWriteStr(output_zip, "patch/boot.img.p", d)
-
-    boot_type, boot_device = common.GetTypeAndDevice("/boot", OPTIONS.info_dict)
-
-    script.PatchCheck("%s:%s:%d:%s:%d:%s" %
-                      (boot_type, boot_device,
-                       source_boot.size, source_boot.sha1,
-                       target_boot.size, target_boot.sha1))
-    so_far += source_boot.size
-
-  size = []
-  if system_diff.patch_list: size.append(system_diff.largest_source_size)
-  if vendor_diff:
-    if vendor_diff.patch_list: size.append(vendor_diff.largest_source_size)
-  if size or updating_recovery or updating_boot:
-    script.CacheFreeSpaceCheck(max(size))
-
-  device_specific.IncrementalOTA_VerifyEnd()
-
-  if OPTIONS.two_step:
-    script.WriteRawImage("/boot", "recovery.img")
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "2/3");
-reboot_now("%(bcb_dev)s", "");
-else
-""" % bcb_dev)
-
-  script.Comment("---- start making changes here ----")
-
-  device_specific.IncrementalOTA_InstallBegin()
-
-  if OPTIONS.two_step:
-    common.ZipWriteStr(output_zip, "boot.img", target_boot.data)
-    script.WriteRawImage("/boot", "boot.img")
-    print "writing full boot image (forced by two-step mode)"
-
-  script.Print("Removing unneeded files...")
-  system_diff.RemoveUnneededFiles(script, ("/system/recovery.img",))
-  if vendor_diff:
-    vendor_diff.RemoveUnneededFiles(script)
-
-  script.ShowProgress(0.8, 0)
-  total_patch_size = 1.0 + system_diff.TotalPatchSize()
-  if vendor_diff:
-    total_patch_size += vendor_diff.TotalPatchSize()
-  if updating_boot:
-    total_patch_size += target_boot.size
-
-  script.Print("Patching system files...")
-  so_far = system_diff.EmitPatches(script, total_patch_size, 0)
-  if vendor_diff:
-    script.Print("Patching vendor files...")
-    so_far = vendor_diff.EmitPatches(script, total_patch_size, so_far)
-
-  if not OPTIONS.two_step:
-    if updating_boot:
-      # Produce the boot image by applying a patch to the current
-      # contents of the boot partition, and write it back to the
-      # partition.
-      script.Print("Patching boot image...")
-      script.ApplyPatch("%s:%s:%d:%s:%d:%s"
-                        % (boot_type, boot_device,
-                           source_boot.size, source_boot.sha1,
-                           target_boot.size, target_boot.sha1),
-                        "-",
-                        target_boot.size, target_boot.sha1,
-                        source_boot.sha1, "patch/boot.img.p")
-      so_far += target_boot.size
-      script.SetProgress(so_far / total_patch_size)
-      print "boot image changed; including."
-    else:
-      print "boot image unchanged; skipping."
-
-  system_items = ItemSet("system", "META/filesystem_config.txt")
-  if vendor_diff:
-    vendor_items = ItemSet("vendor", "META/vendor_filesystem_config.txt")
-
-  if updating_recovery:
-    # Recovery is generated as a patch using both the boot image
-    # (which contains the same linux kernel as recovery) and the file
-    # /system/etc/recovery-resource.dat (which contains all the images
-    # used in the recovery UI) as sources.  This lets us minimize the
-    # size of the patch, which must be included in every OTA package.
-    #
-    # For older builds where recovery-resource.dat is not present, we
-    # use only the boot image as the source.
-
-    if not target_has_recovery_patch:
-      def output_sink(fn, data):
-        common.ZipWriteStr(output_zip, "recovery/" + fn, data)
-        system_items.Get("system/" + fn, dir=False)
-
-      common.MakeRecoveryPatch(OPTIONS.target_tmp, output_sink,
-                               target_recovery, target_boot)
-      script.DeleteFiles(["/system/recovery-from-boot.p",
-                          "/system/etc/install-recovery.sh"])
-    print "recovery image changed; including as patch from boot."
-  else:
-    print "recovery image unchanged; skipping."
-
-  script.ShowProgress(0.1, 10)
-
-  target_symlinks = CopyPartitionFiles(system_items, target_zip, None)
-  if vendor_diff:
-    target_symlinks.extend(CopyPartitionFiles(vendor_items, target_zip, None))
-
-  temp_script = script.MakeTemporary()
-  system_items.GetMetadata(target_zip)
-  system_items.Get("system").SetPermissions(temp_script)
-  if vendor_diff:
-    vendor_items.GetMetadata(target_zip)
-    vendor_items.Get("vendor").SetPermissions(temp_script)
-
-  # Note that this call will mess up the trees of Items, so make sure
-  # we're done with them.
-  source_symlinks = CopyPartitionFiles(system_items, source_zip, None)
-  if vendor_diff:
-    source_symlinks.extend(CopyPartitionFiles(vendor_items, source_zip, None))
-
-  target_symlinks_d = dict([(i[1], i[0]) for i in target_symlinks])
-  source_symlinks_d = dict([(i[1], i[0]) for i in source_symlinks])
-
-  # Delete all the symlinks in source that aren't in target.  This
-  # needs to happen before verbatim files are unpacked, in case a
-  # symlink in the source is replaced by a real file in the target.
-  to_delete = []
-  for dest, link in source_symlinks:
-    if link not in target_symlinks_d:
-      to_delete.append(link)
-  script.DeleteFiles(to_delete)
-
-  if system_diff.verbatim_targets:
-    script.Print("Unpacking new system files...")
-    script.UnpackPackageDir("system", "/system")
-  if vendor_diff and vendor_diff.verbatim_targets:
-    script.Print("Unpacking new vendor files...")
-    script.UnpackPackageDir("vendor", "/vendor")
-
-  if updating_recovery and not target_has_recovery_patch:
-    script.Print("Unpacking new recovery...")
-    script.UnpackPackageDir("recovery", "/system")
-
-  system_diff.EmitRenames(script)
-  if vendor_diff:
-    vendor_diff.EmitRenames(script)
-
-  script.Print("Symlinks and permissions...")
-
-  # Create all the symlinks that don't already exist, or point to
-  # somewhere different than what we want.  Delete each symlink before
-  # creating it, since the 'symlink' command won't overwrite.
-  to_create = []
-  for dest, link in target_symlinks:
-    if link in source_symlinks_d:
-      if dest != source_symlinks_d[link]:
-        to_create.append((dest, link))
-    else:
-      to_create.append((dest, link))
-  script.DeleteFiles([i[1] for i in to_create])
-  script.MakeSymlinks(to_create)
-
-  # Now that the symlinks are created, we can set all the
-  # permissions.
-  script.AppendScript(temp_script)
-
-  # Do device-specific installation (eg, write radio image).
-  device_specific.IncrementalOTA_InstallEnd()
-
-  if OPTIONS.extra_script is not None:
-    script.AppendExtra(OPTIONS.extra_script)
-
-  # Patch the build.prop file last, so if something fails but the
-  # device can still come up, it appears to be the old build and will
-  # get set the OTA package again to retry.
-  script.Print("Patching remaining system files...")
-  system_diff.EmitDeferredPatches(script)
-
-  if OPTIONS.wipe_user_data:
-    script.Print("Erasing user data...")
-    script.FormatPartition("/data")
-
-  if OPTIONS.two_step:
-    script.AppendExtra("""
-set_stage("%(bcb_dev)s", "");
-endif;
-endif;
-""" % bcb_dev)
-
-  if OPTIONS.verify and system_diff:
-    script.Print("Remounting and verifying system partition files...")
-    script.Unmount("/system")
-    script.Mount("/system")
-    system_diff.EmitExplicitTargetVerification(script)
-
-  if OPTIONS.verify and vendor_diff:
-    script.Print("Remounting and verifying vendor partition files...")
-    script.Unmount("/vendor")
-    script.Mount("/vendor")
-    vendor_diff.EmitExplicitTargetVerification(script)
-  script.AddToZip(target_zip, output_zip, input_path=OPTIONS.updater_binary)
-
-  WriteMetadata(metadata, output_zip)
-
-
-def main(argv):
-
-  def option_handler(o, a):
-    if o == "--board_config":
-      pass   # deprecated
-    elif o in ("-k", "--package_key"):
-      OPTIONS.package_key = a
-    elif o in ("-i", "--incremental_from"):
-      OPTIONS.incremental_source = a
-    elif o in ("-w", "--wipe_user_data"):
-      OPTIONS.wipe_user_data = True
-    elif o in ("-n", "--no_prereq"):
-      OPTIONS.omit_prereq = True
-    elif o in ("-o", "--oem_settings"):
-      OPTIONS.oem_source = a
-    elif o in ("-e", "--extra_script"):
-      OPTIONS.extra_script = a
-    elif o in ("-a", "--aslr_mode"):
-      if a in ("on", "On", "true", "True", "yes", "Yes"):
-        OPTIONS.aslr_mode = True
-      else:
-        OPTIONS.aslr_mode = False
-    elif o in ("-t", "--worker_threads"):
-      if a.isdigit():
-        OPTIONS.worker_threads = int(a)
-      else:
-        raise ValueError("Cannot parse value %r for option %r - only "
-                         "integers are allowed." % (a, o))
-    elif o in ("-2", "--two_step"):
-      OPTIONS.two_step = True
-    elif o == "--no_signing":
-      OPTIONS.no_signing = True
-    elif o in ("--verify"):
-      OPTIONS.verify = True
-    elif o == "--block":
-      OPTIONS.block_based = True
-    elif o in ("-b", "--binary"):
-      OPTIONS.updater_binary = a
-    elif o in ("--no_fallback_to_full",):
-      OPTIONS.fallback_to_full = False
-    else:
-      return False
-    return True
-
-  args = common.ParseOptions(argv, __doc__,
-                             extra_opts="b:k:i:d:wne:t:a:2o:",
-                             extra_long_opts=["board_config=",
-                                              "package_key=",
-                                              "incremental_from=",
-                                              "wipe_user_data",
-                                              "no_prereq",
-                                              "extra_script=",
-                                              "worker_threads=",
-                                              "aslr_mode=",
-                                              "two_step",
-                                              "no_signing",
-                                              "block",
-                                              "binary=",
-                                              "oem_settings=",
-                                              "verify",
-                                              "no_fallback_to_full",
-                                              ],
-                             extra_option_handler=option_handler)
-
-  if len(args) != 2:
-    common.Usage(__doc__)
-    sys.exit(1)
-
-  if OPTIONS.extra_script is not None:
-    OPTIONS.extra_script = open(OPTIONS.extra_script).read()
-
-  print "unzipping target target-files..."
-  OPTIONS.input_tmp, input_zip = common.UnzipTemp(args[0])
-
-  OPTIONS.target_tmp = OPTIONS.input_tmp
-  OPTIONS.info_dict = common.LoadInfoDict(input_zip)
-
-  # If this image was originally labelled with SELinux contexts, make sure we
-  # also apply the labels in our new image. During building, the "file_contexts"
-  # is in the out/ directory tree, but for repacking from target-files.zip it's
-  # in the root directory of the ramdisk.
-  if "selinux_fc" in OPTIONS.info_dict:
-    OPTIONS.info_dict["selinux_fc"] = os.path.join(OPTIONS.input_tmp, "BOOT", "RAMDISK",
-        "file_contexts")
-
-  if OPTIONS.verbose:
-    print "--- target info ---"
-    common.DumpInfoDict(OPTIONS.info_dict)
-
-  # If the caller explicitly specified the device-specific extensions
-  # path via -s/--device_specific, use that.  Otherwise, use
-  # META/releasetools.py if it is present in the target target_files.
-  # Otherwise, take the path of the file from 'tool_extensions' in the
-  # info dict and look for that in the local filesystem, relative to
-  # the current directory.
-
-  if OPTIONS.device_specific is None:
-    from_input = os.path.join(OPTIONS.input_tmp, "META", "releasetools.py")
-    if os.path.exists(from_input):
-      print "(using device-specific extensions from target_files)"
-      OPTIONS.device_specific = from_input
-    else:
-      OPTIONS.device_specific = OPTIONS.info_dict.get("tool_extensions", None)
-
-  if OPTIONS.device_specific is not None:
-    OPTIONS.device_specific = os.path.abspath(OPTIONS.device_specific)
-
-  while True:
-
-    if OPTIONS.no_signing:
-      if os.path.exists(args[1]): os.unlink(args[1])
-      output_zip = zipfile.ZipFile(args[1], "w", compression=zipfile.ZIP_DEFLATED)
-    else:
-      temp_zip_file = tempfile.NamedTemporaryFile()
-      output_zip = zipfile.ZipFile(temp_zip_file, "w",
-                                   compression=zipfile.ZIP_DEFLATED)
-
-    if OPTIONS.incremental_source is None:
-      WriteFullOTAPackage(input_zip, output_zip)
-      if OPTIONS.package_key is None:
-        OPTIONS.package_key = OPTIONS.info_dict.get(
-            "default_system_dev_certificate",
-            "build/target/product/security/testkey")
-      break
-
-    else:
-      print "unzipping source target-files..."
-      OPTIONS.source_tmp, source_zip = common.UnzipTemp(OPTIONS.incremental_source)
-      OPTIONS.target_info_dict = OPTIONS.info_dict
-      OPTIONS.source_info_dict = common.LoadInfoDict(source_zip)
-      if "selinux_fc" in OPTIONS.source_info_dict:
-        OPTIONS.source_info_dict["selinux_fc"] = os.path.join(OPTIONS.source_tmp, "BOOT", "RAMDISK",
-                                                              "file_contexts")
-      if OPTIONS.package_key is None:
-        OPTIONS.package_key = OPTIONS.source_info_dict.get(
-            "default_system_dev_certificate",
-            "build/target/product/security/testkey")
-      if OPTIONS.verbose:
-        print "--- source info ---"
-        common.DumpInfoDict(OPTIONS.source_info_dict)
-      try:
-        WriteIncrementalOTAPackage(input_zip, source_zip, output_zip)
-        break
-      except ValueError:
-        if not OPTIONS.fallback_to_full: raise
-        print "--- failed to build incremental; falling back to full ---"
-        OPTIONS.incremental_source = None
-        output_zip.close()
-
-  output_zip.close()
-
-  if not OPTIONS.no_signing:
-    SignOutput(temp_zip_file.name, args[1])
-    temp_zip_file.close()
-
-  print "done."
-
-
-if __name__ == '__main__':
-  try:
-    common.CloseInheritedPipes()
-    main(sys.argv[1:])
-  except common.ExternalError, e:
-    print
-    print "   ERROR: %s" % (e,)
-    print
-    sys.exit(1)
-  finally:
-    common.Cleanup()
diff --git a/tools/releasetools/ota_from_target_files b/tools/releasetools/ota_from_target_files
new file mode 120000
index 0000000..6755a90
--- /dev/null
+++ b/tools/releasetools/ota_from_target_files
@@ -0,0 +1 @@
+ota_from_target_files.py
\ No newline at end of file