diff --git a/core/Makefile b/core/Makefile
index 1d9b99c..726038f 100644
--- a/core/Makefile
+++ b/core/Makefile
@@ -161,295 +161,6 @@
 
 $(call dist-for-goals,sdk,$(API_FINGERPRINT))
 
-# -----------------------------------------------------------------
-# property_overrides_split_enabled
-property_overrides_split_enabled :=
-ifeq ($(BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED), true)
-  property_overrides_split_enabled := true
-endif
-
-# -----------------------------------------------------------------
-# FINAL_VENDOR_DEFAULT_PROPERTIES will be installed in vendor/build.prop if
-# property_overrides_split_enabled is true. Otherwise it will be installed in
-# /system/build.prop
-ifdef BOARD_VNDK_VERSION
-  ifeq ($(BOARD_VNDK_VERSION),current)
-    FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(PLATFORM_VNDK_VERSION)
-  else
-    FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(BOARD_VNDK_VERSION)
-  endif
-  ifdef BOARD_VNDK_RUNTIME_DISABLE
-    FINAL_VENDOR_DEFAULT_PROPERTIES += ro.vndk.lite=true
-  endif
-else
-  FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(PLATFORM_VNDK_VERSION)
-  FINAL_VENDOR_DEFAULT_PROPERTIES += ro.vndk.lite=true
-endif
-FINAL_VENDOR_DEFAULT_PROPERTIES += \
-    $(call collapse-pairs, $(PRODUCT_DEFAULT_PROPERTY_OVERRIDES))
-
-# Add cpu properties for bionic and ART.
-FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.arch=$(TARGET_ARCH)
-FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.cpu_variant=$(TARGET_CPU_VARIANT_RUNTIME)
-FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.2nd_arch=$(TARGET_2ND_ARCH)
-FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.2nd_cpu_variant=$(TARGET_2ND_CPU_VARIANT_RUNTIME)
-
-FINAL_VENDOR_DEFAULT_PROPERTIES += persist.sys.dalvik.vm.lib.2=libart.so
-FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).variant=$(DEX2OAT_TARGET_CPU_VARIANT_RUNTIME)
-ifneq ($(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),)
-  FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).features=$(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES)
-endif
-
-ifdef TARGET_2ND_ARCH
-  FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_2ND_ARCH).variant=$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT_RUNTIME)
-  ifneq ($($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),)
-    FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_2ND_ARCH).features=$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES)
-  endif
-endif
-
-# Although these variables are prefixed with TARGET_RECOVERY_, they are also needed under charger
-# mode (via libminui).
-ifdef TARGET_RECOVERY_DEFAULT_ROTATION
-FINAL_VENDOR_DEFAULT_PROPERTIES += \
-    ro.minui.default_rotation=$(TARGET_RECOVERY_DEFAULT_ROTATION)
-endif
-ifdef TARGET_RECOVERY_OVERSCAN_PERCENT
-FINAL_VENDOR_DEFAULT_PROPERTIES += \
-    ro.minui.overscan_percent=$(TARGET_RECOVERY_OVERSCAN_PERCENT)
-endif
-ifdef TARGET_RECOVERY_PIXEL_FORMAT
-FINAL_VENDOR_DEFAULT_PROPERTIES += \
-    ro.minui.pixel_format=$(TARGET_RECOVERY_PIXEL_FORMAT)
-endif
-FINAL_VENDOR_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \
-    $(FINAL_VENDOR_DEFAULT_PROPERTIES),=)
-
-BUILDINFO_SH := build/make/tools/buildinfo.sh
-BUILDINFO_COMMON_SH := build/make/tools/buildinfo_common.sh
-POST_PROCESS_PROPS :=$= build/make/tools/post_process_props.py
-
-# Generates a set of sysprops common to all partitions to a file.
-# $(1): Partition name
-# $(2): Output file name
-define generate-common-build-props
-	PRODUCT_BRAND="$(PRODUCT_BRAND)" \
-	PRODUCT_DEVICE="$(TARGET_DEVICE)" \
-	PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \
-	PRODUCT_MODEL="$(PRODUCT_MODEL)" \
-	PRODUCT_NAME="$(TARGET_PRODUCT)" \
-	$(call generate-common-build-props-with-product-vars-set,$(1),$(2))
-endef
-
-# Like the above macro, but requiring the relevant PRODUCT_ environment
-# variables to be set when called.
-define generate-common-build-props-with-product-vars-set
-	BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \
-	BUILD_ID="$(BUILD_ID)" \
-	BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \
-	BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
-	DATE="$(DATE_FROM_FILE)" \
-	PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \
-	PLATFORM_VERSION="$(PLATFORM_VERSION)" \
-	TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
-	bash $(BUILDINFO_COMMON_SH) "$(1)" >> $(2)
-endef
-
-# -----------------------------------------------------------------
-# build.prop
-intermediate_system_build_prop := $(call intermediates-dir-for,ETC,system_build_prop)/build.prop
-INSTALLED_BUILD_PROP_TARGET := $(TARGET_OUT)/build.prop
-ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_BUILD_PROP_TARGET)
-
-# TODO(b/117892318) merge DEFAULT into BUILD
-FINAL_DEFAULT_PROPERTIES := \
-    $(call collapse-pairs, $(ADDITIONAL_DEFAULT_PROPERTIES)) \
-    $(call collapse-pairs, $(PRODUCT_SYSTEM_DEFAULT_PROPERTIES))
-FINAL_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \
-    $(FINAL_DEFAULT_PROPERTIES),=)
-
-FINAL_BUILD_PROPERTIES := \
-    $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))
-FINAL_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \
-    $(FINAL_BUILD_PROPERTIES),=)
-
-# A list of arbitrary tags describing the build configuration.
-# Force ":=" so we can use +=
-BUILD_VERSION_TAGS := $(BUILD_VERSION_TAGS)
-ifeq ($(TARGET_BUILD_TYPE),debug)
-  BUILD_VERSION_TAGS += debug
-endif
-# The "test-keys" tag marks builds signed with the old test keys,
-# which are available in the SDK.  "dev-keys" marks builds signed with
-# non-default dev keys (usually private keys from a vendor directory).
-# Both of these tags will be removed and replaced with "release-keys"
-# when the target-files is signed in a post-build step.
-ifeq ($(DEFAULT_SYSTEM_DEV_CERTIFICATE),build/make/target/product/security/testkey)
-BUILD_KEYS := test-keys
-else
-BUILD_KEYS := dev-keys
-endif
-BUILD_VERSION_TAGS += $(BUILD_KEYS)
-BUILD_VERSION_TAGS := $(subst $(space),$(comma),$(sort $(BUILD_VERSION_TAGS)))
-
-# A human-readable string that descibes this build in detail.
-build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER_FROM_FILE) $(BUILD_VERSION_TAGS)
-$(intermediate_system_build_prop): PRIVATE_BUILD_DESC := $(build_desc)
-
-# The string used to uniquely identify the combined build and product; used by the OTA server.
-ifeq (,$(strip $(BUILD_FINGERPRINT)))
-  ifeq ($(strip $(HAS_BUILD_NUMBER)),false)
-    BF_BUILD_NUMBER := $(BUILD_USERNAME)$$($(DATE_FROM_FILE) +%m%d%H%M)
-  else
-    BF_BUILD_NUMBER := $(file <$(BUILD_NUMBER_FILE))
-  endif
-  BUILD_FINGERPRINT := $(PRODUCT_BRAND)/$(TARGET_PRODUCT)/$(TARGET_DEVICE):$(PLATFORM_VERSION)/$(BUILD_ID)/$(BF_BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS)
-endif
-# unset it for safety.
-BF_BUILD_NUMBER :=
-
-BUILD_FINGERPRINT_FILE := $(PRODUCT_OUT)/build_fingerprint.txt
-ifneq (,$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_FINGERPRINT) >$(BUILD_FINGERPRINT_FILE) && grep " " $(BUILD_FINGERPRINT_FILE)))
-  $(error BUILD_FINGERPRINT cannot contain spaces: "$(file <$(BUILD_FINGERPRINT_FILE))")
-endif
-BUILD_FINGERPRINT_FROM_FILE := $$(cat $(BUILD_FINGERPRINT_FILE))
-# unset it for safety.
-BUILD_FINGERPRINT :=
-
-# The string used to uniquely identify the system build; used by the OTA server.
-# This purposefully excludes any product-specific variables.
-ifeq (,$(strip $(BUILD_THUMBPRINT)))
-  BUILD_THUMBPRINT := $(PLATFORM_VERSION)/$(BUILD_ID)/$(BUILD_NUMBER_FROM_FILE):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS)
-endif
-
-BUILD_THUMBPRINT_FILE := $(PRODUCT_OUT)/build_thumbprint.txt
-ifneq (,$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_THUMBPRINT) >$(BUILD_THUMBPRINT_FILE) && grep " " $(BUILD_THUMBPRINT_FILE)))
-  $(error BUILD_THUMBPRINT cannot contain spaces: "$(file <$(BUILD_THUMBPRINT_FILE))")
-endif
-BUILD_THUMBPRINT_FROM_FILE := $$(cat $(BUILD_THUMBPRINT_FILE))
-# unset it for safety.
-BUILD_THUMBPRINT :=
-
-KNOWN_OEM_THUMBPRINT_PROPERTIES := \
-    ro.product.brand \
-    ro.product.name \
-    ro.product.device
-OEM_THUMBPRINT_PROPERTIES := $(filter $(KNOWN_OEM_THUMBPRINT_PROPERTIES),\
-    $(PRODUCT_OEM_PROPERTIES))
-
-# Display parameters shown under Settings -> About Phone
-ifeq ($(TARGET_BUILD_VARIANT),user)
-  # User builds should show:
-  # release build number or branch.buld_number non-release builds
-
-  # Dev. branches should have DISPLAY_BUILD_NUMBER set
-  ifeq (true,$(DISPLAY_BUILD_NUMBER))
-    BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER_FROM_FILE) $(BUILD_KEYS)
-  else
-    BUILD_DISPLAY_ID := $(BUILD_ID) $(BUILD_KEYS)
-  endif
-else
-  # Non-user builds should show detailed build information
-  BUILD_DISPLAY_ID := $(build_desc)
-endif
-
-# Accepts a whitespace separated list of product locales such as
-# (en_US en_AU en_GB...) and returns the first locale in the list with
-# underscores replaced with hyphens. In the example above, this will
-# return "en-US".
-define get-default-product-locale
-$(strip $(subst _,-, $(firstword $(1))))
-endef
-
-# TARGET_BUILD_FLAVOR and ro.build.flavor are used only by the test
-# harness to distinguish builds. Only add _asan for a sanitized build
-# if it isn't already a part of the flavor (via a dedicated lunch
-# config for example).
-TARGET_BUILD_FLAVOR := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)
-ifneq (, $(filter address, $(SANITIZE_TARGET)))
-ifeq (,$(findstring _asan,$(TARGET_BUILD_FLAVOR)))
-TARGET_BUILD_FLAVOR := $(TARGET_BUILD_FLAVOR)_asan
-endif
-endif
-
-ifdef TARGET_SYSTEM_PROP
-system_prop_file := $(TARGET_SYSTEM_PROP)
-else
-system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop)
-endif
-$(intermediate_system_build_prop): $(BUILDINFO_SH) $(BUILDINFO_COMMON_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file) $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(API_FINGERPRINT) $(POST_PROCESS_PROPS)
-	@echo Target buildinfo: $@
-	@mkdir -p $(dir $@)
-	$(hide) rm -f $@ && touch $@
-	$(hide) $(foreach line,$(FINAL_DEFAULT_PROPERTIES), \
-	    echo "$(line)" >> $@;)
-ifndef property_overrides_split_enabled
-	$(hide) $(foreach line,$(FINAL_VENDOR_DEFAULT_PROPERTIES), \
-	    echo "$(line)" >> $@;)
-endif
-ifneq ($(PRODUCT_OEM_PROPERTIES),)
-	$(hide) echo "#" >> $@; \
-	        echo "# PRODUCT_OEM_PROPERTIES" >> $@; \
-	        echo "#" >> $@;
-	$(hide) $(foreach prop,$(PRODUCT_OEM_PROPERTIES), \
-	    echo "import /oem/oem.prop $(prop)" >> $@;)
-endif
-	$(hide) PRODUCT_BRAND="$(PRODUCT_SYSTEM_BRAND)" \
-	        PRODUCT_MANUFACTURER="$(PRODUCT_SYSTEM_MANUFACTURER)" \
-	        PRODUCT_MODEL="$(PRODUCT_SYSTEM_MODEL)" \
-	        PRODUCT_NAME="$(PRODUCT_SYSTEM_NAME)" \
-	        PRODUCT_DEVICE="$(PRODUCT_SYSTEM_DEVICE)" \
-	        $(call generate-common-build-props-with-product-vars-set,system,$@)
-	$(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
-	        TARGET_BUILD_FLAVOR="$(TARGET_BUILD_FLAVOR)" \
-	        TARGET_DEVICE="$(TARGET_DEVICE)" \
-	        PRODUCT_DEFAULT_LOCALE="$(call get-default-product-locale,$(PRODUCT_LOCALES))" \
-	        PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \
-	        PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \
-	        BUILD_ID="$(BUILD_ID)" \
-	        BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \
-	        DATE="$(DATE_FROM_FILE)" \
-	        BUILD_USERNAME="$(BUILD_USERNAME)" \
-	        BUILD_HOSTNAME="$(BUILD_HOSTNAME)" \
-	        BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \
-	        BOARD_BUILD_SYSTEM_ROOT_IMAGE="$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)" \
-	        PLATFORM_VERSION="$(PLATFORM_VERSION)" \
-	        PLATFORM_SECURITY_PATCH="$(PLATFORM_SECURITY_PATCH)" \
-	        PLATFORM_BASE_OS="$(PLATFORM_BASE_OS)" \
-	        PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \
-	        PLATFORM_PREVIEW_SDK_VERSION="$(PLATFORM_PREVIEW_SDK_VERSION)" \
-	        PLATFORM_PREVIEW_SDK_FINGERPRINT="$$(cat $(API_FINGERPRINT))" \
-	        PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \
-	        PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \
-	        PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION="$(PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION)" \
-	        BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
-	        $(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT_FROM_FILE)") \
-	        TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \
-	        TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \
-	        TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \
-	        TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \
-	        TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \
-	        bash $(BUILDINFO_SH) >> $@
-	$(hide) $(foreach file,$(system_prop_file), \
-	    if [ -f "$(file)" ]; then \
-	        echo Target buildinfo from: "$(file)"; \
-	        echo "" >> $@; \
-	        echo "#" >> $@; \
-	        echo "# from $(file)" >> $@; \
-	        echo "#" >> $@; \
-	        cat $(file) >> $@; \
-	        echo "# end of $(file)" >> $@; \
-	    fi;)
-	$(if $(FINAL_BUILD_PROPERTIES), \
-	    $(hide) echo >> $@; \
-	            echo "#" >> $@; \
-	            echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \
-	            echo "#" >> $@; )
-	$(hide) $(foreach line,$(FINAL_BUILD_PROPERTIES), \
-	    echo "$(line)" >> $@;)
-	$(hide) $(POST_PROCESS_PROPS) $@ $(PRODUCT_SYSTEM_PROPERTY_BLACKLIST)
-
-build_desc :=
-
 INSTALLED_RECOVERYIMAGE_TARGET :=
 ifdef BUILDING_RECOVERY_IMAGE
 ifneq ($(BOARD_USES_RECOVERY_AS_BOOT),true)
@@ -457,204 +168,7 @@
 endif
 endif
 
-$(INSTALLED_BUILD_PROP_TARGET): $(intermediate_system_build_prop)
-	@echo "Target build info: $@"
-	$(hide) grep -v 'ro.product.first_api_level' $(intermediate_system_build_prop) > $@
-
-# -----------------------------------------------------------------
-# vendor build.prop
-#
-# For verifying that the vendor build is what we think it is
-INSTALLED_VENDOR_BUILD_PROP_TARGET := $(TARGET_OUT_VENDOR)/build.prop
-ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_VENDOR_BUILD_PROP_TARGET)
-
-ifdef TARGET_VENDOR_PROP
-vendor_prop_files := $(TARGET_VENDOR_PROP)
-else
-vendor_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/vendor.prop)
-endif
-
-ifdef property_overrides_split_enabled
-FINAL_VENDOR_BUILD_PROPERTIES += \
-    $(call collapse-pairs, $(PRODUCT_PROPERTY_OVERRIDES))
-FINAL_VENDOR_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \
-    $(FINAL_VENDOR_BUILD_PROPERTIES),=)
-endif  # property_overrides_split_enabled
-
-$(INSTALLED_VENDOR_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(intermediate_system_build_prop) $(vendor_prop_files)
-	@echo Target vendor buildinfo: $@
-	@mkdir -p $(dir $@)
-	$(hide) rm -f $@ && touch $@
-ifdef property_overrides_split_enabled
-	$(hide) $(foreach line,$(FINAL_VENDOR_DEFAULT_PROPERTIES), \
-	  echo "$(line)" >> $@;)
-endif
-ifeq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
-	$(hide) echo ro.boot.dynamic_partitions=true >> $@
-endif
-ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
-	$(hide) echo ro.boot.dynamic_partitions_retrofit=true >> $@
-endif
-	$(hide) grep 'ro.product.first_api_level' $(intermediate_system_build_prop) >> $@ || true
-	$(hide) echo ro.vendor.build.security_patch="$(VENDOR_SECURITY_PATCH)">>$@
-	$(hide) echo ro.vendor.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@
-	$(hide) echo ro.vendor.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@
-	$(hide) echo ro.vendor.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@
-	$(hide) echo ro.product.board="$(TARGET_BOOTLOADER_BOARD_NAME)">>$@
-	$(hide) echo ro.board.platform="$(TARGET_BOARD_PLATFORM)">>$@
-	$(hide) echo ro.hwui.use_vulkan="$(TARGET_USES_VULKAN)">>$@
-ifdef TARGET_SCREEN_DENSITY
-	$(hide) echo ro.sf.lcd_density="$(TARGET_SCREEN_DENSITY)">>$@
-endif
-ifeq ($(AB_OTA_UPDATER),true)
-	$(hide) echo ro.build.ab_update=true >> $@
-endif
-	$(hide) $(call generate-common-build-props,vendor,$@)
-	$(hide) echo "#" >> $@; \
-	        echo "# BOOTIMAGE_BUILD_PROPERTIES" >> $@; \
-	        echo "#" >> $@;
-	$(hide) echo ro.bootimage.build.date=`$(DATE_FROM_FILE)`>>$@
-	$(hide) echo ro.bootimage.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@
-	$(hide) echo ro.bootimage.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@
-	$(hide) echo "#" >> $@; \
-	        echo "# ADDITIONAL VENDOR BUILD PROPERTIES" >> $@; \
-	        echo "#" >> $@;
-	$(hide) cat $(INSTALLED_ANDROID_INFO_TXT_TARGET) | grep 'require version-' | sed -e 's/require version-/ro.build.expect./g' >> $@
-ifdef property_overrides_split_enabled
-	$(hide) $(foreach file,$(vendor_prop_files), \
-	    if [ -f "$(file)" ]; then \
-	        echo Target vendor properties from: "$(file)"; \
-	        echo "" >> $@; \
-	        echo "#" >> $@; \
-	        echo "# from $(file)" >> $@; \
-	        echo "#" >> $@; \
-	        cat $(file) >> $@; \
-	        echo "# end of $(file)" >> $@; \
-	    fi;)
-	$(hide) $(foreach line,$(FINAL_VENDOR_BUILD_PROPERTIES), \
-	    echo "$(line)" >> $@;)
-endif  # property_overrides_split_enabled
-	$(hide) $(POST_PROCESS_PROPS) $@ $(PRODUCT_VENDOR_PROPERTY_BLACKLIST)
-
-# -----------------------------------------------------------------
-# product build.prop
-INSTALLED_PRODUCT_BUILD_PROP_TARGET := $(TARGET_OUT_PRODUCT)/build.prop
-ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_BUILD_PROP_TARGET)
-
-ifdef TARGET_PRODUCT_PROP
-product_prop_files := $(TARGET_PRODUCT_PROP)
-else
-product_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/product.prop)
-endif
-
-FINAL_PRODUCT_PROPERTIES += \
-    $(call collapse-pairs, $(PRODUCT_PRODUCT_PROPERTIES) $(ADDITIONAL_PRODUCT_PROPERTIES))
-FINAL_PRODUCT_PROPERTIES := $(call uniq-pairs-by-first-component, \
-    $(FINAL_PRODUCT_PROPERTIES),=)
-
-$(INSTALLED_PRODUCT_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(product_prop_files)
-	@echo Target product buildinfo: $@
-	@mkdir -p $(dir $@)
-	$(hide) rm -f $@ && touch $@
-ifdef BOARD_USES_PRODUCTIMAGE
-	$(hide) $(call generate-common-build-props,product,$@)
-endif  # BOARD_USES_PRODUCTIMAGE
-	$(hide) $(foreach file,$(product_prop_files), \
-	    if [ -f "$(file)" ]; then \
-	        echo Target product properties from: "$(file)"; \
-	        echo "" >> $@; \
-	        echo "#" >> $@; \
-	        echo "# from $(file)" >> $@; \
-	        echo "#" >> $@; \
-	        cat $(file) >> $@; \
-	        echo "# end of $(file)" >> $@; \
-	    fi;)
-	$(hide) echo "#" >> $@; \
-	        echo "# ADDITIONAL PRODUCT PROPERTIES" >> $@; \
-	        echo "#" >> $@; \
-	        echo "ro.build.characteristics=$(TARGET_AAPT_CHARACTERISTICS)" >> $@;
-	$(hide) $(foreach line,$(FINAL_PRODUCT_PROPERTIES), \
-	    echo "$(line)" >> $@;)
-	$(hide) $(POST_PROCESS_PROPS) $@
-
-# ----------------------------------------------------------------
-# odm build.prop
-INSTALLED_ODM_BUILD_PROP_TARGET := $(TARGET_OUT_ODM)/etc/build.prop
-ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_ODM_BUILD_PROP_TARGET)
-
-ifdef TARGET_ODM_PROP
-odm_prop_files := $(TARGET_ODM_PROP)
-else
-odm_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/odm.prop)
-endif
-
-FINAL_ODM_BUILD_PROPERTIES += \
-    $(call collapse-pairs, $(PRODUCT_ODM_PROPERTIES))
-FINAL_ODM_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \
-    $(FINAL_ODM_BUILD_PROPERTIES),=)
-
-$(INSTALLED_ODM_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(odm_prop_files)
-	@echo Target odm buildinfo: $@
-	@mkdir -p $(dir $@)
-	$(hide) rm -f $@ && touch $@
-	$(hide) echo ro.odm.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@
-	$(hide) echo ro.odm.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@
-	$(hide) echo ro.odm.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@
-	$(hide) $(call generate-common-build-props,odm,$@)
-	$(hide) $(foreach file,$(odm_prop_files), \
-	    if [ -f "$(file)" ]; then \
-	        echo Target odm properties from: "$(file)"; \
-	        echo "" >> $@; \
-	        echo "#" >> $@; \
-	        echo "# from $(file)" >> $@; \
-	        echo "#" >> $@; \
-	        cat $(file) >> $@; \
-	        echo "# end of $(file)" >> $@; \
-	    fi;)
-	$(hide) echo "#" >> $@; \
-	        echo "# ADDITIONAL ODM BUILD PROPERTIES" >> $@; \
-	        echo "#" >> $@;
-	$(hide) $(foreach line,$(FINAL_ODM_BUILD_PROPERTIES), \
-	    echo "$(line)" >> $@;)
-	$(hide) $(POST_PROCESS_PROPS) $@
-
-# -----------------------------------------------------------------
-# system_ext build.prop
-INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET := $(TARGET_OUT_SYSTEM_EXT)/build.prop
-ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET)
-
-ifdef TARGET_SYSTEM_EXT_PROP
-system_ext_prop_files := $(TARGET_SYSTEM_EXT_PROP)
-else
-system_ext_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/system_ext.prop)
-endif
-
-FINAL_SYSTEM_EXT_PROPERTIES += \
-    $(call collapse-pairs, $(PRODUCT_SYSTEM_EXT_PROPERTIES))
-FINAL_SYSTEM_EXT_PROPERTIES := $(call uniq-pairs-by-first-component, \
-    $(FINAL_SYSTEM_EXT_PROPERTIES),=)
-
-$(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(system_ext_prop_files)
-	@echo Target system_ext buildinfo: $@
-	@mkdir -p $(dir $@)
-	$(hide) rm -f $@ && touch $@
-	$(hide) $(call generate-common-build-props,system_ext,$@)
-	$(hide) $(foreach file,$(system_ext_prop_files), \
-	    if [ -f "$(file)" ]; then \
-	        echo Target system_ext properties from: "$(file)"; \
-	        echo "" >> $@; \
-	        echo "#" >> $@; \
-	        echo "# from $(file)" >> $@; \
-	        echo "#" >> $@; \
-	        cat $(file) >> $@; \
-	        echo "# end of $(file)" >> $@; \
-	    fi;)
-	$(hide) echo "#" >> $@; \
-	        echo "# ADDITIONAL SYSTEM_EXT BUILD PROPERTIES" >> $@; \
-	        echo "#" >> $@;
-	$(hide) $(foreach line,$(FINAL_SYSTEM_EXT_PROPERTIES), \
-	    echo "$(line)" >> $@;)
-	$(hide) $(POST_PROCESS_PROPS) $@
+include $(BUILD_SYSTEM)/sysprop.mk
 
 # ----------------------------------------------------------------
 
diff --git a/core/main.mk b/core/main.mk
index 0299e70..21ec6f9 100644
--- a/core/main.mk
+++ b/core/main.mk
@@ -115,7 +115,7 @@
 # -----------------------------------------------------------------
 # Validate ADDITIONAL_DEFAULT_PROPERTIES.
 ifneq ($(ADDITIONAL_DEFAULT_PROPERTIES),)
-$(error ADDITIONAL_DEFAULT_PROPERTIES must not be set before here: $(ADDITIONAL_DEFAULT_PROPERTIES))
+$(error ADDITIONAL_DEFAULT_PROPERTIES is deprecated)
 endif
 
 #
@@ -207,9 +207,9 @@
 # Sets ro.actionable_compatible_property.enabled to know on runtime whether the whitelist
 # of actionable compatible properties is enabled or not.
 ifeq ($(PRODUCT_ACTIONABLE_COMPATIBLE_PROPERTY_DISABLE),true)
-ADDITIONAL_DEFAULT_PROPERTIES += ro.actionable_compatible_property.enabled=false
+ADDITIONAL_BUILD_PROPERTIES += ro.actionable_compatible_property.enabled=false
 else
-ADDITIONAL_DEFAULT_PROPERTIES += ro.actionable_compatible_property.enabled=${PRODUCT_COMPATIBLE_PROPERTY}
+ADDITIONAL_BUILD_PROPERTIES += ro.actionable_compatible_property.enabled=${PRODUCT_COMPATIBLE_PROPERTY}
 endif
 
 # Add the system server compiler filter if they are specified for the product.
@@ -229,7 +229,7 @@
 #
 # It then uses ${ro.postinstall.fstab.prefix}/etc/fstab.postinstall to
 # mount system_other partition.
-ADDITIONAL_DEFAULT_PROPERTIES += ro.postinstall.fstab.prefix=/system
+ADDITIONAL_BUILD_PROPERTIES += ro.postinstall.fstab.prefix=/system
 
 # Set ro.product.vndk.version to know the VNDK version required by product
 # modules. It uses the version in PRODUCT_PRODUCT_VNDK_VERSION. If the value
@@ -261,11 +261,11 @@
 tags_to_install :=
 ifneq (,$(user_variant))
   # Target is secure in user builds.
-  ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=1
-  ADDITIONAL_DEFAULT_PROPERTIES += security.perf_harden=1
+  ADDITIONAL_BUILD_PROPERTIES += ro.secure=1
+  ADDITIONAL_BUILD_PROPERTIES += security.perf_harden=1
 
   ifeq ($(user_variant),user)
-    ADDITIONAL_DEFAULT_PROPERTIES += ro.adb.secure=1
+    ADDITIONAL_BUILD_PROPERTIES += ro.adb.secure=1
   endif
 
   ifeq ($(user_variant),userdebug)
@@ -277,25 +277,25 @@
   endif
 
   # Disallow mock locations by default for user builds
-  ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=0
+  ADDITIONAL_BUILD_PROPERTIES += ro.allow.mock.location=0
 
 else # !user_variant
   # Turn on checkjni for non-user builds.
   ADDITIONAL_BUILD_PROPERTIES += ro.kernel.android.checkjni=1
   # Set device insecure for non-user builds.
-  ADDITIONAL_DEFAULT_PROPERTIES += ro.secure=0
+  ADDITIONAL_BUILD_PROPERTIES += ro.secure=0
   # Allow mock locations by default for non user builds
-  ADDITIONAL_DEFAULT_PROPERTIES += ro.allow.mock.location=1
+  ADDITIONAL_BUILD_PROPERTIES += ro.allow.mock.location=1
 endif # !user_variant
 
 ifeq (true,$(strip $(enable_target_debugging)))
   # Target is more debuggable and adbd is on by default
-  ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=1
+  ADDITIONAL_BUILD_PROPERTIES += ro.debuggable=1
   # Enable Dalvik lock contention logging.
   ADDITIONAL_BUILD_PROPERTIES += dalvik.vm.lockprof.threshold=500
 else # !enable_target_debugging
   # Target is less debuggable and adbd is off by default
-  ADDITIONAL_DEFAULT_PROPERTIES += ro.debuggable=0
+  ADDITIONAL_BUILD_PROPERTIES += ro.debuggable=0
 endif # !enable_target_debugging
 
 ## eng ##
@@ -388,8 +388,6 @@
 
 # Strip and readonly a few more variables so they won't be modified.
 $(readonly-final-product-vars)
-ADDITIONAL_DEFAULT_PROPERTIES := $(strip $(ADDITIONAL_DEFAULT_PROPERTIES))
-.KATI_READONLY := ADDITIONAL_DEFAULT_PROPERTIES
 ADDITIONAL_BUILD_PROPERTIES := $(strip $(ADDITIONAL_BUILD_PROPERTIES))
 .KATI_READONLY := ADDITIONAL_BUILD_PROPERTIES
 ADDITIONAL_PRODUCT_PROPERTIES := $(strip $(ADDITIONAL_PRODUCT_PROPERTIES))
diff --git a/core/sysprop.mk b/core/sysprop.mk
new file mode 100644
index 0000000..ed13c03
--- /dev/null
+++ b/core/sysprop.mk
@@ -0,0 +1,507 @@
+#
+# Copyright (C) 2020 The Android Open Source Project
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+# sysprop.mk defines rules for generating <partition>/build.prop files
+
+# -----------------------------------------------------------------
+# property_overrides_split_enabled
+property_overrides_split_enabled :=
+ifeq ($(BOARD_PROPERTY_OVERRIDES_SPLIT_ENABLED), true)
+  property_overrides_split_enabled := true
+endif
+
+# -----------------------------------------------------------------
+# FINAL_VENDOR_DEFAULT_PROPERTIES will be installed in vendor/build.prop if
+# property_overrides_split_enabled is true. Otherwise it will be installed in
+# /system/build.prop
+ifdef BOARD_VNDK_VERSION
+  ifeq ($(BOARD_VNDK_VERSION),current)
+    FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(PLATFORM_VNDK_VERSION)
+  else
+    FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(BOARD_VNDK_VERSION)
+  endif
+  ifdef BOARD_VNDK_RUNTIME_DISABLE
+    FINAL_VENDOR_DEFAULT_PROPERTIES += ro.vndk.lite=true
+  endif
+else
+  FINAL_VENDOR_DEFAULT_PROPERTIES := ro.vndk.version=$(PLATFORM_VNDK_VERSION)
+  FINAL_VENDOR_DEFAULT_PROPERTIES += ro.vndk.lite=true
+endif
+FINAL_VENDOR_DEFAULT_PROPERTIES += \
+    $(call collapse-pairs, $(PRODUCT_DEFAULT_PROPERTY_OVERRIDES))
+
+# Add cpu properties for bionic and ART.
+FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.arch=$(TARGET_ARCH)
+FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.cpu_variant=$(TARGET_CPU_VARIANT_RUNTIME)
+FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.2nd_arch=$(TARGET_2ND_ARCH)
+FINAL_VENDOR_DEFAULT_PROPERTIES += ro.bionic.2nd_cpu_variant=$(TARGET_2ND_CPU_VARIANT_RUNTIME)
+
+FINAL_VENDOR_DEFAULT_PROPERTIES += persist.sys.dalvik.vm.lib.2=libart.so
+FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).variant=$(DEX2OAT_TARGET_CPU_VARIANT_RUNTIME)
+ifneq ($(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),)
+  FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_ARCH).features=$(DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES)
+endif
+
+ifdef TARGET_2ND_ARCH
+  FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_2ND_ARCH).variant=$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_CPU_VARIANT_RUNTIME)
+  ifneq ($($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES),)
+    FINAL_VENDOR_DEFAULT_PROPERTIES += dalvik.vm.isa.$(TARGET_2ND_ARCH).features=$($(TARGET_2ND_ARCH_VAR_PREFIX)DEX2OAT_TARGET_INSTRUCTION_SET_FEATURES)
+  endif
+endif
+
+# Although these variables are prefixed with TARGET_RECOVERY_, they are also needed under charger
+# mode (via libminui).
+ifdef TARGET_RECOVERY_DEFAULT_ROTATION
+FINAL_VENDOR_DEFAULT_PROPERTIES += \
+    ro.minui.default_rotation=$(TARGET_RECOVERY_DEFAULT_ROTATION)
+endif
+ifdef TARGET_RECOVERY_OVERSCAN_PERCENT
+FINAL_VENDOR_DEFAULT_PROPERTIES += \
+    ro.minui.overscan_percent=$(TARGET_RECOVERY_OVERSCAN_PERCENT)
+endif
+ifdef TARGET_RECOVERY_PIXEL_FORMAT
+FINAL_VENDOR_DEFAULT_PROPERTIES += \
+    ro.minui.pixel_format=$(TARGET_RECOVERY_PIXEL_FORMAT)
+endif
+FINAL_VENDOR_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_VENDOR_DEFAULT_PROPERTIES),=)
+
+BUILDINFO_SH := build/make/tools/buildinfo.sh
+BUILDINFO_COMMON_SH := build/make/tools/buildinfo_common.sh
+POST_PROCESS_PROPS :=$= build/make/tools/post_process_props.py
+
+# Generates a set of sysprops common to all partitions to a file.
+# $(1): Partition name
+# $(2): Output file name
+define generate-common-build-props
+	PRODUCT_BRAND="$(PRODUCT_BRAND)" \
+	PRODUCT_DEVICE="$(TARGET_DEVICE)" \
+	PRODUCT_MANUFACTURER="$(PRODUCT_MANUFACTURER)" \
+	PRODUCT_MODEL="$(PRODUCT_MODEL)" \
+	PRODUCT_NAME="$(TARGET_PRODUCT)" \
+	$(call generate-common-build-props-with-product-vars-set,$(1),$(2))
+endef
+
+# Like the above macro, but requiring the relevant PRODUCT_ environment
+# variables to be set when called.
+define generate-common-build-props-with-product-vars-set
+	BUILD_FINGERPRINT="$(BUILD_FINGERPRINT_FROM_FILE)" \
+	BUILD_ID="$(BUILD_ID)" \
+	BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \
+	BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
+	DATE="$(DATE_FROM_FILE)" \
+	PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \
+	PLATFORM_VERSION_LAST_STABLE="$(PLATFORM_VERSION_LAST_STABLE)" \
+	PLATFORM_VERSION="$(PLATFORM_VERSION)" \
+	TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
+	bash $(BUILDINFO_COMMON_SH) "$(1)" >> $(2)
+endef
+
+# -----------------------------------------------------------------
+# build.prop
+intermediate_system_build_prop := $(call intermediates-dir-for,ETC,system_build_prop)/build.prop
+INSTALLED_BUILD_PROP_TARGET := $(TARGET_OUT)/build.prop
+ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_BUILD_PROP_TARGET)
+
+# TODO(b/117892318) merge DEFAULT into BUILD
+FINAL_DEFAULT_PROPERTIES := \
+    $(call collapse-pairs, $(PRODUCT_SYSTEM_DEFAULT_PROPERTIES))
+FINAL_DEFAULT_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_DEFAULT_PROPERTIES),=)
+
+FINAL_BUILD_PROPERTIES := \
+    $(call collapse-pairs, $(ADDITIONAL_BUILD_PROPERTIES))
+FINAL_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_BUILD_PROPERTIES),=)
+
+# A list of arbitrary tags describing the build configuration.
+# Force ":=" so we can use +=
+BUILD_VERSION_TAGS := $(BUILD_VERSION_TAGS)
+ifeq ($(TARGET_BUILD_TYPE),debug)
+  BUILD_VERSION_TAGS += debug
+endif
+# The "test-keys" tag marks builds signed with the old test keys,
+# which are available in the SDK.  "dev-keys" marks builds signed with
+# non-default dev keys (usually private keys from a vendor directory).
+# Both of these tags will be removed and replaced with "release-keys"
+# when the target-files is signed in a post-build step.
+ifeq ($(DEFAULT_SYSTEM_DEV_CERTIFICATE),build/make/target/product/security/testkey)
+BUILD_KEYS := test-keys
+else
+BUILD_KEYS := dev-keys
+endif
+BUILD_VERSION_TAGS += $(BUILD_KEYS)
+BUILD_VERSION_TAGS := $(subst $(space),$(comma),$(sort $(BUILD_VERSION_TAGS)))
+
+# A human-readable string that descibes this build in detail.
+build_desc := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT) $(PLATFORM_VERSION) $(BUILD_ID) $(BUILD_NUMBER_FROM_FILE) $(BUILD_VERSION_TAGS)
+$(intermediate_system_build_prop): PRIVATE_BUILD_DESC := $(build_desc)
+
+# The string used to uniquely identify the combined build and product; used by the OTA server.
+ifeq (,$(strip $(BUILD_FINGERPRINT)))
+  ifeq ($(strip $(HAS_BUILD_NUMBER)),false)
+    BF_BUILD_NUMBER := $(BUILD_USERNAME)$$($(DATE_FROM_FILE) +%m%d%H%M)
+  else
+    BF_BUILD_NUMBER := $(file <$(BUILD_NUMBER_FILE))
+  endif
+  BUILD_FINGERPRINT := $(PRODUCT_BRAND)/$(TARGET_PRODUCT)/$(TARGET_DEVICE):$(PLATFORM_VERSION)/$(BUILD_ID)/$(BF_BUILD_NUMBER):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS)
+endif
+# unset it for safety.
+BF_BUILD_NUMBER :=
+
+BUILD_FINGERPRINT_FILE := $(PRODUCT_OUT)/build_fingerprint.txt
+ifneq (,$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_FINGERPRINT) >$(BUILD_FINGERPRINT_FILE) && grep " " $(BUILD_FINGERPRINT_FILE)))
+  $(error BUILD_FINGERPRINT cannot contain spaces: "$(file <$(BUILD_FINGERPRINT_FILE))")
+endif
+BUILD_FINGERPRINT_FROM_FILE := $$(cat $(BUILD_FINGERPRINT_FILE))
+# unset it for safety.
+BUILD_FINGERPRINT :=
+
+# The string used to uniquely identify the system build; used by the OTA server.
+# This purposefully excludes any product-specific variables.
+ifeq (,$(strip $(BUILD_THUMBPRINT)))
+  BUILD_THUMBPRINT := $(PLATFORM_VERSION)/$(BUILD_ID)/$(BUILD_NUMBER_FROM_FILE):$(TARGET_BUILD_VARIANT)/$(BUILD_VERSION_TAGS)
+endif
+
+BUILD_THUMBPRINT_FILE := $(PRODUCT_OUT)/build_thumbprint.txt
+ifneq (,$(shell mkdir -p $(PRODUCT_OUT) && echo $(BUILD_THUMBPRINT) >$(BUILD_THUMBPRINT_FILE) && grep " " $(BUILD_THUMBPRINT_FILE)))
+  $(error BUILD_THUMBPRINT cannot contain spaces: "$(file <$(BUILD_THUMBPRINT_FILE))")
+endif
+BUILD_THUMBPRINT_FROM_FILE := $$(cat $(BUILD_THUMBPRINT_FILE))
+# unset it for safety.
+BUILD_THUMBPRINT :=
+
+KNOWN_OEM_THUMBPRINT_PROPERTIES := \
+    ro.product.brand \
+    ro.product.name \
+    ro.product.device
+OEM_THUMBPRINT_PROPERTIES := $(filter $(KNOWN_OEM_THUMBPRINT_PROPERTIES),\
+    $(PRODUCT_OEM_PROPERTIES))
+
+# Display parameters shown under Settings -> About Phone
+ifeq ($(TARGET_BUILD_VARIANT),user)
+  # User builds should show:
+  # release build number or branch.buld_number non-release builds
+
+  # Dev. branches should have DISPLAY_BUILD_NUMBER set
+  ifeq (true,$(DISPLAY_BUILD_NUMBER))
+    BUILD_DISPLAY_ID := $(BUILD_ID).$(BUILD_NUMBER_FROM_FILE) $(BUILD_KEYS)
+  else
+    BUILD_DISPLAY_ID := $(BUILD_ID) $(BUILD_KEYS)
+  endif
+else
+  # Non-user builds should show detailed build information
+  BUILD_DISPLAY_ID := $(build_desc)
+endif
+
+# Accepts a whitespace separated list of product locales such as
+# (en_US en_AU en_GB...) and returns the first locale in the list with
+# underscores replaced with hyphens. In the example above, this will
+# return "en-US".
+define get-default-product-locale
+$(strip $(subst _,-, $(firstword $(1))))
+endef
+
+# TARGET_BUILD_FLAVOR and ro.build.flavor are used only by the test
+# harness to distinguish builds. Only add _asan for a sanitized build
+# if it isn't already a part of the flavor (via a dedicated lunch
+# config for example).
+TARGET_BUILD_FLAVOR := $(TARGET_PRODUCT)-$(TARGET_BUILD_VARIANT)
+ifneq (, $(filter address, $(SANITIZE_TARGET)))
+ifeq (,$(findstring _asan,$(TARGET_BUILD_FLAVOR)))
+TARGET_BUILD_FLAVOR := $(TARGET_BUILD_FLAVOR)_asan
+endif
+endif
+
+ifdef TARGET_SYSTEM_PROP
+system_prop_file := $(TARGET_SYSTEM_PROP)
+else
+system_prop_file := $(wildcard $(TARGET_DEVICE_DIR)/system.prop)
+endif
+$(intermediate_system_build_prop): $(BUILDINFO_SH) $(BUILDINFO_COMMON_SH) $(INTERNAL_BUILD_ID_MAKEFILE) $(BUILD_SYSTEM)/version_defaults.mk $(system_prop_file) $(INSTALLED_ANDROID_INFO_TXT_TARGET) $(API_FINGERPRINT) $(POST_PROCESS_PROPS)
+	@echo Target buildinfo: $@
+	@mkdir -p $(dir $@)
+	$(hide) rm -f $@ && touch $@
+	$(hide) $(foreach line,$(FINAL_DEFAULT_PROPERTIES), \
+	    echo "$(line)" >> $@;)
+ifndef property_overrides_split_enabled
+	$(hide) $(foreach line,$(FINAL_VENDOR_DEFAULT_PROPERTIES), \
+	    echo "$(line)" >> $@;)
+endif
+ifneq ($(PRODUCT_OEM_PROPERTIES),)
+	$(hide) echo "#" >> $@; \
+	        echo "# PRODUCT_OEM_PROPERTIES" >> $@; \
+	        echo "#" >> $@;
+	$(hide) $(foreach prop,$(PRODUCT_OEM_PROPERTIES), \
+	    echo "import /oem/oem.prop $(prop)" >> $@;)
+endif
+	$(hide) PRODUCT_BRAND="$(PRODUCT_SYSTEM_BRAND)" \
+	        PRODUCT_MANUFACTURER="$(PRODUCT_SYSTEM_MANUFACTURER)" \
+	        PRODUCT_MODEL="$(PRODUCT_SYSTEM_MODEL)" \
+	        PRODUCT_NAME="$(PRODUCT_SYSTEM_NAME)" \
+	        PRODUCT_DEVICE="$(PRODUCT_SYSTEM_DEVICE)" \
+	        $(call generate-common-build-props-with-product-vars-set,system,$@)
+	$(hide) TARGET_BUILD_TYPE="$(TARGET_BUILD_VARIANT)" \
+	        TARGET_BUILD_FLAVOR="$(TARGET_BUILD_FLAVOR)" \
+	        TARGET_DEVICE="$(TARGET_DEVICE)" \
+	        PRODUCT_DEFAULT_LOCALE="$(call get-default-product-locale,$(PRODUCT_LOCALES))" \
+	        PRODUCT_DEFAULT_WIFI_CHANNELS="$(PRODUCT_DEFAULT_WIFI_CHANNELS)" \
+	        PRIVATE_BUILD_DESC="$(PRIVATE_BUILD_DESC)" \
+	        BUILD_ID="$(BUILD_ID)" \
+	        BUILD_DISPLAY_ID="$(BUILD_DISPLAY_ID)" \
+	        DATE="$(DATE_FROM_FILE)" \
+	        BUILD_USERNAME="$(BUILD_USERNAME)" \
+	        BUILD_HOSTNAME="$(BUILD_HOSTNAME)" \
+	        BUILD_NUMBER="$(BUILD_NUMBER_FROM_FILE)" \
+	        BOARD_BUILD_SYSTEM_ROOT_IMAGE="$(BOARD_BUILD_SYSTEM_ROOT_IMAGE)" \
+	        PLATFORM_VERSION="$(PLATFORM_VERSION)" \
+	        PLATFORM_VERSION_LAST_STABLE="$(PLATFORM_VERSION_LAST_STABLE)" \
+	        PLATFORM_SECURITY_PATCH="$(PLATFORM_SECURITY_PATCH)" \
+	        PLATFORM_BASE_OS="$(PLATFORM_BASE_OS)" \
+	        PLATFORM_SDK_VERSION="$(PLATFORM_SDK_VERSION)" \
+	        PLATFORM_PREVIEW_SDK_VERSION="$(PLATFORM_PREVIEW_SDK_VERSION)" \
+	        PLATFORM_PREVIEW_SDK_FINGERPRINT="$$(cat $(API_FINGERPRINT))" \
+	        PLATFORM_VERSION_CODENAME="$(PLATFORM_VERSION_CODENAME)" \
+	        PLATFORM_VERSION_ALL_CODENAMES="$(PLATFORM_VERSION_ALL_CODENAMES)" \
+	        PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION="$(PLATFORM_MIN_SUPPORTED_TARGET_SDK_VERSION)" \
+	        BUILD_VERSION_TAGS="$(BUILD_VERSION_TAGS)" \
+	        $(if $(OEM_THUMBPRINT_PROPERTIES),BUILD_THUMBPRINT="$(BUILD_THUMBPRINT_FROM_FILE)") \
+	        TARGET_CPU_ABI_LIST="$(TARGET_CPU_ABI_LIST)" \
+	        TARGET_CPU_ABI_LIST_32_BIT="$(TARGET_CPU_ABI_LIST_32_BIT)" \
+	        TARGET_CPU_ABI_LIST_64_BIT="$(TARGET_CPU_ABI_LIST_64_BIT)" \
+	        TARGET_CPU_ABI="$(TARGET_CPU_ABI)" \
+	        TARGET_CPU_ABI2="$(TARGET_CPU_ABI2)" \
+	        bash $(BUILDINFO_SH) >> $@
+	$(hide) $(foreach file,$(system_prop_file), \
+	    if [ -f "$(file)" ]; then \
+	        echo Target buildinfo from: "$(file)"; \
+	        echo "" >> $@; \
+	        echo "#" >> $@; \
+	        echo "# from $(file)" >> $@; \
+	        echo "#" >> $@; \
+	        cat $(file) >> $@; \
+	        echo "# end of $(file)" >> $@; \
+	    fi;)
+	$(if $(FINAL_BUILD_PROPERTIES), \
+	    $(hide) echo >> $@; \
+	            echo "#" >> $@; \
+	            echo "# ADDITIONAL_BUILD_PROPERTIES" >> $@; \
+	            echo "#" >> $@; )
+	$(hide) $(foreach line,$(FINAL_BUILD_PROPERTIES), \
+	    echo "$(line)" >> $@;)
+	$(hide) $(POST_PROCESS_PROPS) $@ $(PRODUCT_SYSTEM_PROPERTY_BLACKLIST)
+
+build_desc :=
+
+$(INSTALLED_BUILD_PROP_TARGET): $(intermediate_system_build_prop)
+	@echo "Target build info: $@"
+	$(hide) grep -v 'ro.product.first_api_level' $(intermediate_system_build_prop) > $@
+
+# -----------------------------------------------------------------
+# vendor build.prop
+#
+# For verifying that the vendor build is what we think it is
+INSTALLED_VENDOR_BUILD_PROP_TARGET := $(TARGET_OUT_VENDOR)/build.prop
+ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_VENDOR_BUILD_PROP_TARGET)
+
+ifdef TARGET_VENDOR_PROP
+vendor_prop_files := $(TARGET_VENDOR_PROP)
+else
+vendor_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/vendor.prop)
+endif
+
+ifdef property_overrides_split_enabled
+FINAL_VENDOR_BUILD_PROPERTIES += \
+    $(call collapse-pairs, $(PRODUCT_PROPERTY_OVERRIDES))
+FINAL_VENDOR_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_VENDOR_BUILD_PROPERTIES),=)
+endif  # property_overrides_split_enabled
+
+$(INSTALLED_VENDOR_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(intermediate_system_build_prop) $(vendor_prop_files)
+	@echo Target vendor buildinfo: $@
+	@mkdir -p $(dir $@)
+	$(hide) rm -f $@ && touch $@
+ifdef property_overrides_split_enabled
+	$(hide) $(foreach line,$(FINAL_VENDOR_DEFAULT_PROPERTIES), \
+	  echo "$(line)" >> $@;)
+endif
+ifeq ($(PRODUCT_USE_DYNAMIC_PARTITIONS),true)
+	$(hide) echo ro.boot.dynamic_partitions=true >> $@
+endif
+ifeq ($(PRODUCT_RETROFIT_DYNAMIC_PARTITIONS),true)
+	$(hide) echo ro.boot.dynamic_partitions_retrofit=true >> $@
+endif
+	$(hide) grep 'ro.product.first_api_level' $(intermediate_system_build_prop) >> $@ || true
+	$(hide) echo ro.vendor.build.security_patch="$(VENDOR_SECURITY_PATCH)">>$@
+	$(hide) echo ro.vendor.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@
+	$(hide) echo ro.vendor.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@
+	$(hide) echo ro.vendor.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@
+	$(hide) echo ro.product.board="$(TARGET_BOOTLOADER_BOARD_NAME)">>$@
+	$(hide) echo ro.board.platform="$(TARGET_BOARD_PLATFORM)">>$@
+	$(hide) echo ro.hwui.use_vulkan="$(TARGET_USES_VULKAN)">>$@
+ifdef TARGET_SCREEN_DENSITY
+	$(hide) echo ro.sf.lcd_density="$(TARGET_SCREEN_DENSITY)">>$@
+endif
+ifeq ($(AB_OTA_UPDATER),true)
+	$(hide) echo ro.build.ab_update=true >> $@
+endif
+	$(hide) $(call generate-common-build-props,vendor,$@)
+	$(hide) echo "#" >> $@; \
+	        echo "# BOOTIMAGE_BUILD_PROPERTIES" >> $@; \
+	        echo "#" >> $@;
+	$(hide) echo ro.bootimage.build.date=`$(DATE_FROM_FILE)`>>$@
+	$(hide) echo ro.bootimage.build.date.utc=`$(DATE_FROM_FILE) +%s`>>$@
+	$(hide) echo ro.bootimage.build.fingerprint="$(BUILD_FINGERPRINT_FROM_FILE)">>$@
+	$(hide) echo "#" >> $@; \
+	        echo "# ADDITIONAL VENDOR BUILD PROPERTIES" >> $@; \
+	        echo "#" >> $@;
+	$(hide) cat $(INSTALLED_ANDROID_INFO_TXT_TARGET) | grep 'require version-' | sed -e 's/require version-/ro.build.expect./g' >> $@
+ifdef property_overrides_split_enabled
+	$(hide) $(foreach file,$(vendor_prop_files), \
+	    if [ -f "$(file)" ]; then \
+	        echo Target vendor properties from: "$(file)"; \
+	        echo "" >> $@; \
+	        echo "#" >> $@; \
+	        echo "# from $(file)" >> $@; \
+	        echo "#" >> $@; \
+	        cat $(file) >> $@; \
+	        echo "# end of $(file)" >> $@; \
+	    fi;)
+	$(hide) $(foreach line,$(FINAL_VENDOR_BUILD_PROPERTIES), \
+	    echo "$(line)" >> $@;)
+endif  # property_overrides_split_enabled
+	$(hide) $(POST_PROCESS_PROPS) $@ $(PRODUCT_VENDOR_PROPERTY_BLACKLIST)
+
+
+# -----------------------------------------------------------------
+# product build.prop
+INSTALLED_PRODUCT_BUILD_PROP_TARGET := $(TARGET_OUT_PRODUCT)/build.prop
+ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_PRODUCT_BUILD_PROP_TARGET)
+
+ifdef TARGET_PRODUCT_PROP
+product_prop_files := $(TARGET_PRODUCT_PROP)
+else
+product_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/product.prop)
+endif
+
+FINAL_PRODUCT_PROPERTIES += \
+    $(call collapse-pairs, $(PRODUCT_PRODUCT_PROPERTIES) $(ADDITIONAL_PRODUCT_PROPERTIES))
+FINAL_PRODUCT_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_PRODUCT_PROPERTIES),=)
+
+$(INSTALLED_PRODUCT_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(product_prop_files)
+	@echo Target product buildinfo: $@
+	@mkdir -p $(dir $@)
+	$(hide) rm -f $@ && touch $@
+ifdef BOARD_USES_PRODUCTIMAGE
+	$(hide) $(call generate-common-build-props,product,$@)
+endif  # BOARD_USES_PRODUCTIMAGE
+	$(hide) $(foreach file,$(product_prop_files), \
+	    if [ -f "$(file)" ]; then \
+	        echo Target product properties from: "$(file)"; \
+	        echo "" >> $@; \
+	        echo "#" >> $@; \
+	        echo "# from $(file)" >> $@; \
+	        echo "#" >> $@; \
+	        cat $(file) >> $@; \
+	        echo "# end of $(file)" >> $@; \
+	    fi;)
+	$(hide) echo "#" >> $@; \
+	        echo "# ADDITIONAL PRODUCT PROPERTIES" >> $@; \
+	        echo "#" >> $@; \
+	        echo "ro.build.characteristics=$(TARGET_AAPT_CHARACTERISTICS)" >> $@;
+	$(hide) $(foreach line,$(FINAL_PRODUCT_PROPERTIES), \
+	    echo "$(line)" >> $@;)
+	$(hide) $(POST_PROCESS_PROPS) $@
+
+# ----------------------------------------------------------------
+# odm build.prop
+INSTALLED_ODM_BUILD_PROP_TARGET := $(TARGET_OUT_ODM)/etc/build.prop
+ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_ODM_BUILD_PROP_TARGET)
+
+ifdef TARGET_ODM_PROP
+odm_prop_files := $(TARGET_ODM_PROP)
+else
+odm_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/odm.prop)
+endif
+
+FINAL_ODM_BUILD_PROPERTIES += \
+    $(call collapse-pairs, $(PRODUCT_ODM_PROPERTIES))
+FINAL_ODM_BUILD_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_ODM_BUILD_PROPERTIES),=)
+
+$(INSTALLED_ODM_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(odm_prop_files)
+	@echo Target odm buildinfo: $@
+	@mkdir -p $(dir $@)
+	$(hide) rm -f $@ && touch $@
+	$(hide) echo ro.odm.product.cpu.abilist="$(TARGET_CPU_ABI_LIST)">>$@
+	$(hide) echo ro.odm.product.cpu.abilist32="$(TARGET_CPU_ABI_LIST_32_BIT)">>$@
+	$(hide) echo ro.odm.product.cpu.abilist64="$(TARGET_CPU_ABI_LIST_64_BIT)">>$@
+	$(hide) $(call generate-common-build-props,odm,$@)
+	$(hide) $(foreach file,$(odm_prop_files), \
+	    if [ -f "$(file)" ]; then \
+	        echo Target odm properties from: "$(file)"; \
+	        echo "" >> $@; \
+	        echo "#" >> $@; \
+	        echo "# from $(file)" >> $@; \
+	        echo "#" >> $@; \
+	        cat $(file) >> $@; \
+	        echo "# end of $(file)" >> $@; \
+	    fi;)
+	$(hide) echo "#" >> $@; \
+	        echo "# ADDITIONAL ODM BUILD PROPERTIES" >> $@; \
+	        echo "#" >> $@;
+	$(hide) $(foreach line,$(FINAL_ODM_BUILD_PROPERTIES), \
+	    echo "$(line)" >> $@;)
+	$(hide) $(POST_PROCESS_PROPS) $@
+
+# -----------------------------------------------------------------
+# system_ext build.prop
+INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET := $(TARGET_OUT_SYSTEM_EXT)/build.prop
+ALL_DEFAULT_INSTALLED_MODULES += $(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET)
+
+ifdef TARGET_SYSTEM_EXT_PROP
+system_ext_prop_files := $(TARGET_SYSTEM_EXT_PROP)
+else
+system_ext_prop_files := $(wildcard $(TARGET_DEVICE_DIR)/system_ext.prop)
+endif
+
+FINAL_SYSTEM_EXT_PROPERTIES += \
+    $(call collapse-pairs, $(PRODUCT_SYSTEM_EXT_PROPERTIES))
+FINAL_SYSTEM_EXT_PROPERTIES := $(call uniq-pairs-by-first-component, \
+    $(FINAL_SYSTEM_EXT_PROPERTIES),=)
+
+$(INSTALLED_SYSTEM_EXT_BUILD_PROP_TARGET): $(BUILDINFO_COMMON_SH) $(POST_PROCESS_PROPS) $(system_ext_prop_files)
+	@echo Target system_ext buildinfo: $@
+	@mkdir -p $(dir $@)
+	$(hide) rm -f $@ && touch $@
+	$(hide) $(call generate-common-build-props,system_ext,$@)
+	$(hide) $(foreach file,$(system_ext_prop_files), \
+	    if [ -f "$(file)" ]; then \
+	        echo Target system_ext properties from: "$(file)"; \
+	        echo "" >> $@; \
+	        echo "#" >> $@; \
+	        echo "# from $(file)" >> $@; \
+	        echo "#" >> $@; \
+	        cat $(file) >> $@; \
+	        echo "# end of $(file)" >> $@; \
+	    fi;)
+	$(hide) echo "#" >> $@; \
+	        echo "# ADDITIONAL SYSTEM_EXT BUILD PROPERTIES" >> $@; \
+	        echo "#" >> $@;
+	$(hide) $(foreach line,$(FINAL_SYSTEM_EXT_PROPERTIES), \
+	    echo "$(line)" >> $@;)
+	$(hide) $(POST_PROCESS_PROPS) $@