diff --git a/tools/zipalign/ZipFile.cpp b/tools/zipalign/ZipFile.cpp
new file mode 100644
index 0000000..62c9383
--- /dev/null
+++ b/tools/zipalign/ZipFile.cpp
@@ -0,0 +1,1297 @@
+/*
+ * Copyright (C) 2006 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+//
+// Access to Zip archives.
+//
+
+#define LOG_TAG "zip"
+
+#include <utils/ZipUtils.h>
+#include <utils/Log.h>
+
+#include "ZipFile.h"
+
+#include <zlib.h>
+#define DEF_MEM_LEVEL 8                // normally in zutil.h?
+
+#include <memory.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <assert.h>
+
+using namespace android;
+
+/*
+ * Some environments require the "b", some choke on it.
+ */
+#define FILE_OPEN_RO        "rb"
+#define FILE_OPEN_RW        "r+b"
+#define FILE_OPEN_RW_CREATE "w+b"
+
+/* should live somewhere else? */
+static status_t errnoToStatus(int err)
+{
+    if (err == ENOENT)
+        return NAME_NOT_FOUND;
+    else if (err == EACCES)
+        return PERMISSION_DENIED;
+    else
+        return UNKNOWN_ERROR;
+}
+
+/*
+ * Open a file and parse its guts.
+ */
+status_t ZipFile::open(const char* zipFileName, int flags)
+{
+    bool newArchive = false;
+
+    assert(mZipFp == NULL);     // no reopen
+
+    if ((flags & kOpenTruncate))
+        flags |= kOpenCreate;           // trunc implies create
+
+    if ((flags & kOpenReadOnly) && (flags & kOpenReadWrite))
+        return INVALID_OPERATION;       // not both
+    if (!((flags & kOpenReadOnly) || (flags & kOpenReadWrite)))
+        return INVALID_OPERATION;       // not neither
+    if ((flags & kOpenCreate) && !(flags & kOpenReadWrite))
+        return INVALID_OPERATION;       // create requires write
+
+    if (flags & kOpenTruncate) {
+        newArchive = true;
+    } else {
+        newArchive = (access(zipFileName, F_OK) != 0);
+        if (!(flags & kOpenCreate) && newArchive) {
+            /* not creating, must already exist */
+            LOGD("File %s does not exist", zipFileName);
+            return NAME_NOT_FOUND;
+        }
+    }
+
+    /* open the file */
+    const char* openflags;
+    if (flags & kOpenReadWrite) {
+        if (newArchive)
+            openflags = FILE_OPEN_RW_CREATE;
+        else
+            openflags = FILE_OPEN_RW;
+    } else {
+        openflags = FILE_OPEN_RO;
+    }
+    mZipFp = fopen(zipFileName, openflags);
+    if (mZipFp == NULL) {
+        int err = errno;
+        LOGD("fopen failed: %d\n", err);
+        return errnoToStatus(err);
+    }
+
+    status_t result;
+    if (!newArchive) {
+        /*
+         * Load the central directory.  If that fails, then this probably
+         * isn't a Zip archive.
+         */
+        result = readCentralDir();
+    } else {
+        /*
+         * Newly-created.  The EndOfCentralDir constructor actually
+         * sets everything to be the way we want it (all zeroes).  We
+         * set mNeedCDRewrite so that we create *something* if the
+         * caller doesn't add any files.  (We could also just unlink
+         * the file if it's brand new and nothing was added, but that's
+         * probably doing more than we really should -- the user might
+         * have a need for empty zip files.)
+         */
+        mNeedCDRewrite = true;
+        result = NO_ERROR;
+    }
+
+    if (flags & kOpenReadOnly)
+        mReadOnly = true;
+    else
+        assert(!mReadOnly);
+
+    return result;
+}
+
+/*
+ * Return the Nth entry in the archive.
+ */
+ZipEntry* ZipFile::getEntryByIndex(int idx) const
+{
+    if (idx < 0 || idx >= (int) mEntries.size())
+        return NULL;
+
+    return mEntries[idx];
+}
+
+/*
+ * Find an entry by name.
+ */
+ZipEntry* ZipFile::getEntryByName(const char* fileName) const
+{
+    /*
+     * Do a stupid linear string-compare search.
+     *
+     * There are various ways to speed this up, especially since it's rare
+     * to intermingle changes to the archive with "get by name" calls.  We
+     * don't want to sort the mEntries vector itself, however, because
+     * it's used to recreate the Central Directory.
+     *
+     * (Hash table works, parallel list of pointers in sorted order is good.)
+     */
+    int idx;
+
+    for (idx = mEntries.size()-1; idx >= 0; idx--) {
+        ZipEntry* pEntry = mEntries[idx];
+        if (!pEntry->getDeleted() &&
+            strcmp(fileName, pEntry->getFileName()) == 0)
+        {
+            return pEntry;
+        }
+    }
+
+    return NULL;
+}
+
+/*
+ * Empty the mEntries vector.
+ */
+void ZipFile::discardEntries(void)
+{
+    int count = mEntries.size();
+
+    while (--count >= 0)
+        delete mEntries[count];
+
+    mEntries.clear();
+}
+
+
+/*
+ * Find the central directory and read the contents.
+ *
+ * The fun thing about ZIP archives is that they may or may not be
+ * readable from start to end.  In some cases, notably for archives
+ * that were written to stdout, the only length information is in the
+ * central directory at the end of the file.
+ *
+ * Of course, the central directory can be followed by a variable-length
+ * comment field, so we have to scan through it backwards.  The comment
+ * is at most 64K, plus we have 18 bytes for the end-of-central-dir stuff
+ * itself, plus apparently sometimes people throw random junk on the end
+ * just for the fun of it.
+ *
+ * This is all a little wobbly.  If the wrong value ends up in the EOCD
+ * area, we're hosed.  This appears to be the way that everbody handles
+ * it though, so we're in pretty good company if this fails.
+ */
+status_t ZipFile::readCentralDir(void)
+{
+    status_t result = NO_ERROR;
+    unsigned char* buf = NULL;
+    off_t fileLength, seekStart;
+    long readAmount;
+    int i;
+
+    fseek(mZipFp, 0, SEEK_END);
+    fileLength = ftell(mZipFp);
+    rewind(mZipFp);
+
+    /* too small to be a ZIP archive? */
+    if (fileLength < EndOfCentralDir::kEOCDLen) {
+        LOGD("Length is %ld -- too small\n", (long)fileLength);
+        result = INVALID_OPERATION;
+        goto bail;
+    }
+
+    buf = new unsigned char[EndOfCentralDir::kMaxEOCDSearch];
+    if (buf == NULL) {
+        LOGD("Failure allocating %d bytes for EOCD search",
+             EndOfCentralDir::kMaxEOCDSearch);
+        result = NO_MEMORY;
+        goto bail;
+    }
+
+    if (fileLength > EndOfCentralDir::kMaxEOCDSearch) {
+        seekStart = fileLength - EndOfCentralDir::kMaxEOCDSearch;
+        readAmount = EndOfCentralDir::kMaxEOCDSearch;
+    } else {
+        seekStart = 0;
+        readAmount = (long) fileLength;
+    }
+    if (fseek(mZipFp, seekStart, SEEK_SET) != 0) {
+        LOGD("Failure seeking to end of zip at %ld", (long) seekStart);
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+
+    /* read the last part of the file into the buffer */
+    if (fread(buf, 1, readAmount, mZipFp) != (size_t) readAmount) {
+        LOGD("short file? wanted %ld\n", readAmount);
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+
+    /* find the end-of-central-dir magic */
+    for (i = readAmount - 4; i >= 0; i--) {
+        if (buf[i] == 0x50 &&
+            ZipEntry::getLongLE(&buf[i]) == EndOfCentralDir::kSignature)
+        {
+            LOGV("+++ Found EOCD at buf+%d\n", i);
+            break;
+        }
+    }
+    if (i < 0) {
+        LOGD("EOCD not found, not Zip\n");
+        result = INVALID_OPERATION;
+        goto bail;
+    }
+
+    /* extract eocd values */
+    result = mEOCD.readBuf(buf + i, readAmount - i);
+    if (result != NO_ERROR) {
+        LOGD("Failure reading %ld bytes of EOCD values", readAmount - i);
+        goto bail;
+    }
+    //mEOCD.dump();
+
+    if (mEOCD.mDiskNumber != 0 || mEOCD.mDiskWithCentralDir != 0 ||
+        mEOCD.mNumEntries != mEOCD.mTotalNumEntries)
+    {
+        LOGD("Archive spanning not supported\n");
+        result = INVALID_OPERATION;
+        goto bail;
+    }
+
+    /*
+     * So far so good.  "mCentralDirSize" is the size in bytes of the
+     * central directory, so we can just seek back that far to find it.
+     * We can also seek forward mCentralDirOffset bytes from the
+     * start of the file.
+     *
+     * We're not guaranteed to have the rest of the central dir in the
+     * buffer, nor are we guaranteed that the central dir will have any
+     * sort of convenient size.  We need to skip to the start of it and
+     * read the header, then the other goodies.
+     *
+     * The only thing we really need right now is the file comment, which
+     * we're hoping to preserve.
+     */
+    if (fseek(mZipFp, mEOCD.mCentralDirOffset, SEEK_SET) != 0) {
+        LOGD("Failure seeking to central dir offset %ld\n",
+             mEOCD.mCentralDirOffset);
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+
+    /*
+     * Loop through and read the central dir entries.
+     */
+    LOGV("Scanning %d entries...\n", mEOCD.mTotalNumEntries);
+    int entry;
+    for (entry = 0; entry < mEOCD.mTotalNumEntries; entry++) {
+        ZipEntry* pEntry = new ZipEntry;
+
+        result = pEntry->initFromCDE(mZipFp);
+        if (result != NO_ERROR) {
+            LOGD("initFromCDE failed\n");
+            delete pEntry;
+            goto bail;
+        }
+
+        mEntries.add(pEntry);
+    }
+
+
+    /*
+     * If all went well, we should now be back at the EOCD.
+     */
+    {
+        unsigned char checkBuf[4];
+        if (fread(checkBuf, 1, 4, mZipFp) != 4) {
+            LOGD("EOCD check read failed\n");
+            result = INVALID_OPERATION;
+            goto bail;
+        }
+        if (ZipEntry::getLongLE(checkBuf) != EndOfCentralDir::kSignature) {
+            LOGD("EOCD read check failed\n");
+            result = UNKNOWN_ERROR;
+            goto bail;
+        }
+        LOGV("+++ EOCD read check passed\n");
+    }
+
+bail:
+    delete[] buf;
+    return result;
+}
+
+
+/*
+ * Add a new file to the archive.
+ *
+ * This requires creating and populating a ZipEntry structure, and copying
+ * the data into the file at the appropriate position.  The "appropriate
+ * position" is the current location of the central directory, which we
+ * casually overwrite (we can put it back later).
+ *
+ * If we were concerned about safety, we would want to make all changes
+ * in a temp file and then overwrite the original after everything was
+ * safely written.  Not really a concern for us.
+ */
+status_t ZipFile::addCommon(const char* fileName, const void* data, size_t size,
+    const char* storageName, int sourceType, int compressionMethod,
+    ZipEntry** ppEntry)
+{
+    ZipEntry* pEntry = NULL;
+    status_t result = NO_ERROR;
+    long lfhPosn, startPosn, endPosn, uncompressedLen;
+    FILE* inputFp = NULL;
+    unsigned long crc;
+    time_t modWhen;
+
+    if (mReadOnly)
+        return INVALID_OPERATION;
+
+    assert(compressionMethod == ZipEntry::kCompressDeflated ||
+           compressionMethod == ZipEntry::kCompressStored);
+
+    /* make sure we're in a reasonable state */
+    assert(mZipFp != NULL);
+    assert(mEntries.size() == mEOCD.mTotalNumEntries);
+
+    /* make sure it doesn't already exist */
+    if (getEntryByName(storageName) != NULL)
+        return ALREADY_EXISTS;
+
+    if (!data) {
+        inputFp = fopen(fileName, FILE_OPEN_RO);
+        if (inputFp == NULL)
+            return errnoToStatus(errno);
+    }
+
+    if (fseek(mZipFp, mEOCD.mCentralDirOffset, SEEK_SET) != 0) {
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+
+    pEntry = new ZipEntry;
+    pEntry->initNew(storageName, NULL);
+
+    /*
+     * From here on out, failures are more interesting.
+     */
+    mNeedCDRewrite = true;
+
+    /*
+     * Write the LFH, even though it's still mostly blank.  We need it
+     * as a place-holder.  In theory the LFH isn't necessary, but in
+     * practice some utilities demand it.
+     */
+    lfhPosn = ftell(mZipFp);
+    pEntry->mLFH.write(mZipFp);
+    startPosn = ftell(mZipFp);
+
+    /*
+     * Copy the data in, possibly compressing it as we go.
+     */
+    if (sourceType == ZipEntry::kCompressStored) {
+        if (compressionMethod == ZipEntry::kCompressDeflated) {
+            bool failed = false;
+            result = compressFpToFp(mZipFp, inputFp, data, size, &crc);
+            if (result != NO_ERROR) {
+                LOGD("compression failed, storing\n");
+                failed = true;
+            } else {
+                /*
+                 * Make sure it has compressed "enough".  This probably ought
+                 * to be set through an API call, but I don't expect our
+                 * criteria to change over time.
+                 */
+                long src = inputFp ? ftell(inputFp) : size;
+                long dst = ftell(mZipFp) - startPosn;
+                if (dst + (dst / 10) > src) {
+                    LOGD("insufficient compression (src=%ld dst=%ld), storing\n",
+                        src, dst);
+                    failed = true;
+                }
+            }
+
+            if (failed) {
+                compressionMethod = ZipEntry::kCompressStored;
+                if (inputFp) rewind(inputFp);
+                fseek(mZipFp, startPosn, SEEK_SET);
+                /* fall through to kCompressStored case */
+            }
+        }
+        /* handle "no compression" request, or failed compression from above */
+        if (compressionMethod == ZipEntry::kCompressStored) {
+            if (inputFp) {
+                result = copyFpToFp(mZipFp, inputFp, &crc);
+            } else {
+                result = copyDataToFp(mZipFp, data, size, &crc);
+            }
+            if (result != NO_ERROR) {
+                // don't need to truncate; happens in CDE rewrite
+                LOGD("failed copying data in\n");
+                goto bail;
+            }
+        }
+
+        // currently seeked to end of file
+        uncompressedLen = inputFp ? ftell(inputFp) : size;
+    } else if (sourceType == ZipEntry::kCompressDeflated) {
+        /* we should support uncompressed-from-compressed, but it's not
+         * important right now */
+        assert(compressionMethod == ZipEntry::kCompressDeflated);
+
+        bool scanResult;
+        int method;
+        long compressedLen;
+
+        scanResult = ZipUtils::examineGzip(inputFp, &method, &uncompressedLen,
+                        &compressedLen, &crc);
+        if (!scanResult || method != ZipEntry::kCompressDeflated) {
+            LOGD("this isn't a deflated gzip file?");
+            result = UNKNOWN_ERROR;
+            goto bail;
+        }
+
+        result = copyPartialFpToFp(mZipFp, inputFp, compressedLen, NULL);
+        if (result != NO_ERROR) {
+            LOGD("failed copying gzip data in\n");
+            goto bail;
+        }
+    } else {
+        assert(false);
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+
+    /*
+     * We could write the "Data Descriptor", but there doesn't seem to
+     * be any point since we're going to go back and write the LFH.
+     *
+     * Update file offsets.
+     */
+    endPosn = ftell(mZipFp);            // seeked to end of compressed data
+
+    /*
+     * Success!  Fill out new values.
+     */
+    pEntry->setDataInfo(uncompressedLen, endPosn - startPosn, crc,
+        compressionMethod);
+    modWhen = getModTime(inputFp ? fileno(inputFp) : fileno(mZipFp));
+    pEntry->setModWhen(modWhen);
+    pEntry->setLFHOffset(lfhPosn);
+    mEOCD.mNumEntries++;
+    mEOCD.mTotalNumEntries++;
+    mEOCD.mCentralDirSize = 0;      // mark invalid; set by flush()
+    mEOCD.mCentralDirOffset = endPosn;
+
+    /*
+     * Go back and write the LFH.
+     */
+    if (fseek(mZipFp, lfhPosn, SEEK_SET) != 0) {
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+    pEntry->mLFH.write(mZipFp);
+
+    /*
+     * Add pEntry to the list.
+     */
+    mEntries.add(pEntry);
+    if (ppEntry != NULL)
+        *ppEntry = pEntry;
+    pEntry = NULL;
+
+bail:
+    if (inputFp != NULL)
+        fclose(inputFp);
+    delete pEntry;
+    return result;
+}
+
+/*
+ * Add an entry by copying it from another zip file.  If "padding" is
+ * nonzero, the specified number of bytes will be added to the "extra"
+ * field in the header.
+ *
+ * If "ppEntry" is non-NULL, a pointer to the new entry will be returned.
+ */
+status_t ZipFile::add(const ZipFile* pSourceZip, const ZipEntry* pSourceEntry,
+    int padding, ZipEntry** ppEntry)
+{
+    ZipEntry* pEntry = NULL;
+    status_t result;
+    long lfhPosn, endPosn;
+
+    if (mReadOnly)
+        return INVALID_OPERATION;
+
+    /* make sure we're in a reasonable state */
+    assert(mZipFp != NULL);
+    assert(mEntries.size() == mEOCD.mTotalNumEntries);
+
+    if (fseek(mZipFp, mEOCD.mCentralDirOffset, SEEK_SET) != 0) {
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+
+    pEntry = new ZipEntry;
+    if (pEntry == NULL) {
+        result = NO_MEMORY;
+        goto bail;
+    }
+
+    result = pEntry->initFromExternal(pSourceZip, pSourceEntry);
+    if (result != NO_ERROR)
+        goto bail;
+    if (padding != 0) {
+        result = pEntry->addPadding(padding);
+        if (result != NO_ERROR)
+            goto bail;
+    }
+
+    /*
+     * From here on out, failures are more interesting.
+     */
+    mNeedCDRewrite = true;
+
+    /*
+     * Write the LFH.  Since we're not recompressing the data, we already
+     * have all of the fields filled out.
+     */
+    lfhPosn = ftell(mZipFp);
+    pEntry->mLFH.write(mZipFp);
+
+    /*
+     * Copy the data over.
+     *
+     * If the "has data descriptor" flag is set, we want to copy the DD
+     * fields as well.  This is a fixed-size area immediately following
+     * the data.
+     */
+    if (fseek(pSourceZip->mZipFp, pSourceEntry->getFileOffset(), SEEK_SET) != 0)
+    {
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+
+    off_t copyLen;
+    copyLen = pSourceEntry->getCompressedLen();
+    if ((pSourceEntry->mLFH.mGPBitFlag & ZipEntry::kUsesDataDescr) != 0)
+        copyLen += ZipEntry::kDataDescriptorLen;
+
+    if (copyPartialFpToFp(mZipFp, pSourceZip->mZipFp, copyLen, NULL)
+        != NO_ERROR)
+    {
+        LOGW("copy of '%s' failed\n", pEntry->mCDE.mFileName);
+        result = UNKNOWN_ERROR;
+        goto bail;
+    }
+
+    /*
+     * Update file offsets.
+     */
+    endPosn = ftell(mZipFp);
+
+    /*
+     * Success!  Fill out new values.
+     */
+    pEntry->setLFHOffset(lfhPosn);      // sets mCDE.mLocalHeaderRelOffset
+    mEOCD.mNumEntries++;
+    mEOCD.mTotalNumEntries++;
+    mEOCD.mCentralDirSize = 0;      // mark invalid; set by flush()
+    mEOCD.mCentralDirOffset = endPosn;
+
+    /*
+     * Add pEntry to the list.
+     */
+    mEntries.add(pEntry);
+    if (ppEntry != NULL)
+        *ppEntry = pEntry;
+    pEntry = NULL;
+
+    result = NO_ERROR;
+
+bail:
+    delete pEntry;
+    return result;
+}
+
+/*
+ * Copy all of the bytes in "src" to "dst".
+ *
+ * On exit, "srcFp" will be seeked to the end of the file, and "dstFp"
+ * will be seeked immediately past the data.
+ */
+status_t ZipFile::copyFpToFp(FILE* dstFp, FILE* srcFp, unsigned long* pCRC32)
+{
+    unsigned char tmpBuf[32768];
+    size_t count;
+
+    *pCRC32 = crc32(0L, Z_NULL, 0);
+
+    while (1) {
+        count = fread(tmpBuf, 1, sizeof(tmpBuf), srcFp);
+        if (ferror(srcFp) || ferror(dstFp))
+            return errnoToStatus(errno);
+        if (count == 0)
+            break;
+
+        *pCRC32 = crc32(*pCRC32, tmpBuf, count);
+
+        if (fwrite(tmpBuf, 1, count, dstFp) != count) {
+            LOGD("fwrite %d bytes failed\n", (int) count);
+            return UNKNOWN_ERROR;
+        }
+    }
+
+    return NO_ERROR;
+}
+
+/*
+ * Copy all of the bytes in "src" to "dst".
+ *
+ * On exit, "dstFp" will be seeked immediately past the data.
+ */
+status_t ZipFile::copyDataToFp(FILE* dstFp,
+    const void* data, size_t size, unsigned long* pCRC32)
+{
+    size_t count;
+
+    *pCRC32 = crc32(0L, Z_NULL, 0);
+    if (size > 0) {
+        *pCRC32 = crc32(*pCRC32, (const unsigned char*)data, size);
+        if (fwrite(data, 1, size, dstFp) != size) {
+            LOGD("fwrite %d bytes failed\n", (int) size);
+            return UNKNOWN_ERROR;
+        }
+    }
+
+    return NO_ERROR;
+}
+
+/*
+ * Copy some of the bytes in "src" to "dst".
+ *
+ * If "pCRC32" is NULL, the CRC will not be computed.
+ *
+ * On exit, "srcFp" will be seeked to the end of the file, and "dstFp"
+ * will be seeked immediately past the data just written.
+ */
+status_t ZipFile::copyPartialFpToFp(FILE* dstFp, FILE* srcFp, long length,
+    unsigned long* pCRC32)
+{
+    unsigned char tmpBuf[32768];
+    size_t count;
+
+    if (pCRC32 != NULL)
+        *pCRC32 = crc32(0L, Z_NULL, 0);
+
+    while (length) {
+        long readSize;
+        
+        readSize = sizeof(tmpBuf);
+        if (readSize > length)
+            readSize = length;
+
+        count = fread(tmpBuf, 1, readSize, srcFp);
+        if ((long) count != readSize) {     // error or unexpected EOF
+            LOGD("fread %d bytes failed\n", (int) readSize);
+            return UNKNOWN_ERROR;
+        }
+
+        if (pCRC32 != NULL)
+            *pCRC32 = crc32(*pCRC32, tmpBuf, count);
+
+        if (fwrite(tmpBuf, 1, count, dstFp) != count) {
+            LOGD("fwrite %d bytes failed\n", (int) count);
+            return UNKNOWN_ERROR;
+        }
+
+        length -= readSize;
+    }
+
+    return NO_ERROR;
+}
+
+/*
+ * Compress all of the data in "srcFp" and write it to "dstFp".
+ *
+ * On exit, "srcFp" will be seeked to the end of the file, and "dstFp"
+ * will be seeked immediately past the compressed data.
+ */
+status_t ZipFile::compressFpToFp(FILE* dstFp, FILE* srcFp,
+    const void* data, size_t size, unsigned long* pCRC32)
+{
+    status_t result = NO_ERROR;
+    const size_t kBufSize = 32768;
+    unsigned char* inBuf = NULL;
+    unsigned char* outBuf = NULL;
+    z_stream zstream;
+    bool atEof = false;     // no feof() aviailable yet
+    unsigned long crc;
+    int zerr;
+
+    /*
+     * Create an input buffer and an output buffer.
+     */
+    inBuf = new unsigned char[kBufSize];
+    outBuf = new unsigned char[kBufSize];
+    if (inBuf == NULL || outBuf == NULL) {
+        result = NO_MEMORY;
+        goto bail;
+    }
+
+    /*
+     * Initialize the zlib stream.
+     */
+    memset(&zstream, 0, sizeof(zstream));
+    zstream.zalloc = Z_NULL;
+    zstream.zfree = Z_NULL;
+    zstream.opaque = Z_NULL;
+    zstream.next_in = NULL;
+    zstream.avail_in = 0;
+    zstream.next_out = outBuf;
+    zstream.avail_out = kBufSize;
+    zstream.data_type = Z_UNKNOWN;
+
+    zerr = deflateInit2(&zstream, Z_BEST_COMPRESSION,
+        Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, Z_DEFAULT_STRATEGY);
+    if (zerr != Z_OK) {
+        result = UNKNOWN_ERROR;
+        if (zerr == Z_VERSION_ERROR) {
+            LOGE("Installed zlib is not compatible with linked version (%s)\n",
+                ZLIB_VERSION);
+        } else {
+            LOGD("Call to deflateInit2 failed (zerr=%d)\n", zerr);
+        }
+        goto bail;
+    }
+
+    crc = crc32(0L, Z_NULL, 0);
+
+    /*
+     * Loop while we have data.
+     */
+    do {
+        size_t getSize;
+        int flush;
+
+        /* only read if the input buffer is empty */
+        if (zstream.avail_in == 0 && !atEof) {
+            LOGV("+++ reading %d bytes\n", (int)kBufSize);
+            if (data) {
+                getSize = size > kBufSize ? kBufSize : size;
+                memcpy(inBuf, data, getSize);
+                data = ((const char*)data) + getSize;
+                size -= getSize;
+            } else {
+                getSize = fread(inBuf, 1, kBufSize, srcFp);
+                if (ferror(srcFp)) {
+                    LOGD("deflate read failed (errno=%d)\n", errno);
+                    goto z_bail;
+                }
+            }
+            if (getSize < kBufSize) {
+                LOGV("+++  got %d bytes, EOF reached\n",
+                    (int)getSize);
+                atEof = true;
+            }
+
+            crc = crc32(crc, inBuf, getSize);
+
+            zstream.next_in = inBuf;
+            zstream.avail_in = getSize;
+        }
+
+        if (atEof)
+            flush = Z_FINISH;       /* tell zlib that we're done */
+        else
+            flush = Z_NO_FLUSH;     /* more to come! */
+
+        zerr = deflate(&zstream, flush);
+        if (zerr != Z_OK && zerr != Z_STREAM_END) {
+            LOGD("zlib deflate call failed (zerr=%d)\n", zerr);
+            result = UNKNOWN_ERROR;
+            goto z_bail;
+        }
+
+        /* write when we're full or when we're done */
+        if (zstream.avail_out == 0 ||
+            (zerr == Z_STREAM_END && zstream.avail_out != (uInt) kBufSize))
+        {
+            LOGV("+++ writing %d bytes\n", (int) (zstream.next_out - outBuf));
+            if (fwrite(outBuf, 1, zstream.next_out - outBuf, dstFp) !=
+                (size_t)(zstream.next_out - outBuf))
+            {
+                LOGD("write %d failed in deflate\n",
+                    (int) (zstream.next_out - outBuf));
+                goto z_bail;
+            }
+
+            zstream.next_out = outBuf;
+            zstream.avail_out = kBufSize;
+        }
+    } while (zerr == Z_OK);
+
+    assert(zerr == Z_STREAM_END);       /* other errors should've been caught */
+
+    *pCRC32 = crc;
+
+z_bail:
+    deflateEnd(&zstream);        /* free up any allocated structures */
+
+bail:
+    delete[] inBuf;
+    delete[] outBuf;
+
+    return result;
+}
+
+/*
+ * Mark an entry as deleted.
+ *
+ * We will eventually need to crunch the file down, but if several files
+ * are being removed (perhaps as part of an "update" process) we can make
+ * things considerably faster by deferring the removal to "flush" time.
+ */
+status_t ZipFile::remove(ZipEntry* pEntry)
+{
+    /*
+     * Should verify that pEntry is actually part of this archive, and
+     * not some stray ZipEntry from a different file.
+     */
+
+    /* mark entry as deleted, and mark archive as dirty */
+    pEntry->setDeleted();
+    mNeedCDRewrite = true;
+    return NO_ERROR;
+}
+
+/*
+ * Flush any pending writes.
+ *
+ * In particular, this will crunch out deleted entries, and write the
+ * Central Directory and EOCD if we have stomped on them.
+ */
+status_t ZipFile::flush(void)
+{
+    status_t result = NO_ERROR;
+    long eocdPosn;
+    int i, count;
+
+    if (mReadOnly)
+        return INVALID_OPERATION;
+    if (!mNeedCDRewrite)
+        return NO_ERROR;
+
+    assert(mZipFp != NULL);
+
+    result = crunchArchive();
+    if (result != NO_ERROR)
+        return result;
+
+    if (fseek(mZipFp, mEOCD.mCentralDirOffset, SEEK_SET) != 0)
+        return UNKNOWN_ERROR;
+
+    count = mEntries.size();
+    for (i = 0; i < count; i++) {
+        ZipEntry* pEntry = mEntries[i];
+        pEntry->mCDE.write(mZipFp);
+    }
+
+    eocdPosn = ftell(mZipFp);
+    mEOCD.mCentralDirSize = eocdPosn - mEOCD.mCentralDirOffset;
+
+    mEOCD.write(mZipFp);
+
+    /*
+     * If we had some stuff bloat up during compression and get replaced
+     * with plain files, or if we deleted some entries, there's a lot
+     * of wasted space at the end of the file.  Remove it now.
+     */
+    if (ftruncate(fileno(mZipFp), ftell(mZipFp)) != 0) {
+        LOGW("ftruncate failed %ld: %s\n", ftell(mZipFp), strerror(errno));
+        // not fatal
+    }
+
+    /* should we clear the "newly added" flag in all entries now? */
+
+    mNeedCDRewrite = false;
+    return NO_ERROR;
+}
+
+/*
+ * Crunch deleted files out of an archive by shifting the later files down.
+ *
+ * Because we're not using a temp file, we do the operation inside the
+ * current file.
+ */
+status_t ZipFile::crunchArchive(void)
+{
+    status_t result = NO_ERROR;
+    int i, count;
+    long delCount, adjust;
+
+#if 0
+    printf("CONTENTS:\n");
+    for (i = 0; i < (int) mEntries.size(); i++) {
+        printf(" %d: lfhOff=%ld del=%d\n",
+            i, mEntries[i]->getLFHOffset(), mEntries[i]->getDeleted());
+    }
+    printf("  END is %ld\n", (long) mEOCD.mCentralDirOffset);
+#endif
+
+    /*
+     * Roll through the set of files, shifting them as appropriate.  We
+     * could probably get a slight performance improvement by sliding
+     * multiple files down at once (because we could use larger reads
+     * when operating on batches of small files), but it's not that useful.
+     */
+    count = mEntries.size();
+    delCount = adjust = 0;
+    for (i = 0; i < count; i++) {
+        ZipEntry* pEntry = mEntries[i];
+        long span;
+
+        if (pEntry->getLFHOffset() != 0) {
+            long nextOffset;
+
+            /* Get the length of this entry by finding the offset
+             * of the next entry.  Directory entries don't have
+             * file offsets, so we need to find the next non-directory
+             * entry.
+             */
+            nextOffset = 0;
+            for (int ii = i+1; nextOffset == 0 && ii < count; ii++)
+                nextOffset = mEntries[ii]->getLFHOffset();
+            if (nextOffset == 0)
+                nextOffset = mEOCD.mCentralDirOffset;
+            span = nextOffset - pEntry->getLFHOffset();
+
+            assert(span >= ZipEntry::LocalFileHeader::kLFHLen);
+        } else {
+            /* This is a directory entry.  It doesn't have
+             * any actual file contents, so there's no need to
+             * move anything.
+             */
+            span = 0;
+        }
+
+        //printf("+++ %d: off=%ld span=%ld del=%d [count=%d]\n",
+        //    i, pEntry->getLFHOffset(), span, pEntry->getDeleted(), count);
+
+        if (pEntry->getDeleted()) {
+            adjust += span;
+            delCount++;
+
+            delete pEntry;
+            mEntries.removeAt(i);
+
+            /* adjust loop control */
+            count--;
+            i--;
+        } else if (span != 0 && adjust > 0) {
+            /* shuffle this entry back */
+            //printf("+++ Shuffling '%s' back %ld\n",
+            //    pEntry->getFileName(), adjust);
+            result = filemove(mZipFp, pEntry->getLFHOffset() - adjust,
+                        pEntry->getLFHOffset(), span);
+            if (result != NO_ERROR) {
+                /* this is why you use a temp file */
+                LOGE("error during crunch - archive is toast\n");
+                return result;
+            }
+
+            pEntry->setLFHOffset(pEntry->getLFHOffset() - adjust);
+        }
+    }
+
+    /*
+     * Fix EOCD info.  We have to wait until the end to do some of this
+     * because we use mCentralDirOffset to determine "span" for the
+     * last entry.
+     */
+    mEOCD.mCentralDirOffset -= adjust;
+    mEOCD.mNumEntries -= delCount;
+    mEOCD.mTotalNumEntries -= delCount;
+    mEOCD.mCentralDirSize = 0;  // mark invalid; set by flush()
+
+    assert(mEOCD.mNumEntries == mEOCD.mTotalNumEntries);
+    assert(mEOCD.mNumEntries == count);
+
+    return result;
+}
+
+/*
+ * Works like memmove(), but on pieces of a file.
+ */
+status_t ZipFile::filemove(FILE* fp, off_t dst, off_t src, size_t n)
+{
+    if (dst == src || n <= 0)
+        return NO_ERROR;
+
+    unsigned char readBuf[32768];
+
+    if (dst < src) {
+        /* shift stuff toward start of file; must read from start */
+        while (n != 0) {
+            size_t getSize = sizeof(readBuf);
+            if (getSize > n)
+                getSize = n;
+
+            if (fseek(fp, (long) src, SEEK_SET) != 0) {
+                LOGD("filemove src seek %ld failed\n", (long) src);
+                return UNKNOWN_ERROR;
+            }
+
+            if (fread(readBuf, 1, getSize, fp) != getSize) {
+                LOGD("filemove read %ld off=%ld failed\n",
+                    (long) getSize, (long) src);
+                return UNKNOWN_ERROR;
+            }
+
+            if (fseek(fp, (long) dst, SEEK_SET) != 0) {
+                LOGD("filemove dst seek %ld failed\n", (long) dst);
+                return UNKNOWN_ERROR;
+            }
+
+            if (fwrite(readBuf, 1, getSize, fp) != getSize) {
+                LOGD("filemove write %ld off=%ld failed\n",
+                    (long) getSize, (long) dst);
+                return UNKNOWN_ERROR;
+            }
+
+            src += getSize;
+            dst += getSize;
+            n -= getSize;
+        }
+    } else {
+        /* shift stuff toward end of file; must read from end */
+        assert(false);      // write this someday, maybe
+        return UNKNOWN_ERROR;
+    }
+
+    return NO_ERROR;
+}
+
+
+/*
+ * Get the modification time from a file descriptor.
+ */
+time_t ZipFile::getModTime(int fd)
+{
+    struct stat sb;
+
+    if (fstat(fd, &sb) < 0) {
+        LOGD("HEY: fstat on fd %d failed\n", fd);
+        return (time_t) -1;
+    }
+
+    return sb.st_mtime;
+}
+
+
+#if 0       /* this is a bad idea */
+/*
+ * Get a copy of the Zip file descriptor.
+ *
+ * We don't allow this if the file was opened read-write because we tend
+ * to leave the file contents in an uncertain state between calls to
+ * flush().  The duplicated file descriptor should only be valid for reads.
+ */
+int ZipFile::getZipFd(void) const
+{
+    if (!mReadOnly)
+        return INVALID_OPERATION;
+    assert(mZipFp != NULL);
+
+    int fd;
+    fd = dup(fileno(mZipFp));
+    if (fd < 0) {
+        LOGD("didn't work, errno=%d\n", errno);
+    }
+
+    return fd;
+}
+#endif
+
+
+#if 0
+/*
+ * Expand data.
+ */
+bool ZipFile::uncompress(const ZipEntry* pEntry, void* buf) const
+{
+    return false;
+}
+#endif
+
+// free the memory when you're done
+void* ZipFile::uncompress(const ZipEntry* entry)
+{
+    size_t unlen = entry->getUncompressedLen();
+    size_t clen = entry->getCompressedLen();
+
+    void* buf = malloc(unlen);
+    if (buf == NULL) {
+        return NULL;
+    }
+
+    fseek(mZipFp, 0, SEEK_SET);
+
+    off_t offset = entry->getFileOffset();
+    if (fseek(mZipFp, offset, SEEK_SET) != 0) {
+        goto bail;
+    }
+
+    switch (entry->getCompressionMethod())
+    {
+        case ZipEntry::kCompressStored: {
+            ssize_t amt = fread(buf, 1, unlen, mZipFp);
+            if (amt != (ssize_t)unlen) {
+                goto bail;
+            }
+#if 0
+            printf("data...\n");
+            const unsigned char* p = (unsigned char*)buf;
+            const unsigned char* end = p+unlen;
+            for (int i=0; i<32 && p < end; i++) {
+                printf("0x%08x ", (int)(offset+(i*0x10)));
+                for (int j=0; j<0x10 && p < end; j++) {
+                    printf(" %02x", *p);
+                    p++;
+                }
+                printf("\n");
+            }
+#endif
+
+            }
+            break;
+        case ZipEntry::kCompressDeflated: {
+            if (!ZipUtils::inflateToBuffer(mZipFp, buf, unlen, clen)) {
+                goto bail;
+            }
+            }
+            break;
+        default:
+            goto bail;
+    }
+    return buf;
+
+bail:
+    free(buf);
+    return NULL;
+}
+
+
+/*
+ * ===========================================================================
+ *      ZipFile::EndOfCentralDir
+ * ===========================================================================
+ */
+
+/*
+ * Read the end-of-central-dir fields.
+ *
+ * "buf" should be positioned at the EOCD signature, and should contain
+ * the entire EOCD area including the comment.
+ */
+status_t ZipFile::EndOfCentralDir::readBuf(const unsigned char* buf, int len)
+{
+    /* don't allow re-use */
+    assert(mComment == NULL);
+
+    if (len < kEOCDLen) {
+        /* looks like ZIP file got truncated */
+        LOGD(" Zip EOCD: expected >= %d bytes, found %d\n",
+            kEOCDLen, len);
+        return INVALID_OPERATION;
+    }
+
+    /* this should probably be an assert() */
+    if (ZipEntry::getLongLE(&buf[0x00]) != kSignature)
+        return UNKNOWN_ERROR;
+
+    mDiskNumber = ZipEntry::getShortLE(&buf[0x04]);
+    mDiskWithCentralDir = ZipEntry::getShortLE(&buf[0x06]);
+    mNumEntries = ZipEntry::getShortLE(&buf[0x08]);
+    mTotalNumEntries = ZipEntry::getShortLE(&buf[0x0a]);
+    mCentralDirSize = ZipEntry::getLongLE(&buf[0x0c]);
+    mCentralDirOffset = ZipEntry::getLongLE(&buf[0x10]);
+    mCommentLen = ZipEntry::getShortLE(&buf[0x14]);
+
+    // TODO: validate mCentralDirOffset
+
+    if (mCommentLen > 0) {
+        if (kEOCDLen + mCommentLen > len) {
+            LOGD("EOCD(%d) + comment(%d) exceeds len (%d)\n",
+                kEOCDLen, mCommentLen, len);
+            return UNKNOWN_ERROR;
+        }
+        mComment = new unsigned char[mCommentLen];
+        memcpy(mComment, buf + kEOCDLen, mCommentLen);
+    }
+
+    return NO_ERROR;
+}
+
+/*
+ * Write an end-of-central-directory section.
+ */
+status_t ZipFile::EndOfCentralDir::write(FILE* fp)
+{
+    unsigned char buf[kEOCDLen];
+
+    ZipEntry::putLongLE(&buf[0x00], kSignature);
+    ZipEntry::putShortLE(&buf[0x04], mDiskNumber);
+    ZipEntry::putShortLE(&buf[0x06], mDiskWithCentralDir);
+    ZipEntry::putShortLE(&buf[0x08], mNumEntries);
+    ZipEntry::putShortLE(&buf[0x0a], mTotalNumEntries);
+    ZipEntry::putLongLE(&buf[0x0c], mCentralDirSize);
+    ZipEntry::putLongLE(&buf[0x10], mCentralDirOffset);
+    ZipEntry::putShortLE(&buf[0x14], mCommentLen);
+
+    if (fwrite(buf, 1, kEOCDLen, fp) != kEOCDLen)
+        return UNKNOWN_ERROR;
+    if (mCommentLen > 0) {
+        assert(mComment != NULL);
+        if (fwrite(mComment, mCommentLen, 1, fp) != mCommentLen)
+            return UNKNOWN_ERROR;
+    }
+
+    return NO_ERROR;
+}
+
+/*
+ * Dump the contents of an EndOfCentralDir object.
+ */
+void ZipFile::EndOfCentralDir::dump(void) const
+{
+    LOGD(" EndOfCentralDir contents:\n");
+    LOGD("  diskNum=%u diskWCD=%u numEnt=%u totalNumEnt=%u\n",
+        mDiskNumber, mDiskWithCentralDir, mNumEntries, mTotalNumEntries);
+    LOGD("  centDirSize=%lu centDirOff=%lu commentLen=%u\n",
+        mCentralDirSize, mCentralDirOffset, mCommentLen);
+}
+