diff --git a/libc/arch-arm64/generic/bionic/memmove.S b/libc/arch-arm64/generic/bionic/memmove.S
index 739ce49..c50112d 100644
--- a/libc/arch-arm64/generic/bionic/memmove.S
+++ b/libc/arch-arm64/generic/bionic/memmove.S
@@ -1,4 +1,4 @@
-/* Copyright (c) 2014, Linaro Limited
+/* Copyright (c) 2013, Linaro Limited
    All rights reserved.
 
    Redistribution and use in source and binary forms, with or without
@@ -22,14 +22,39 @@
    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
+   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
+
+/*
+ * Copyright (c) 2015 ARM Ltd
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. The name of the company may not be used to endorse or promote
+ *    products derived from this software without specific prior written
+ *    permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ARM LTD ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL ARM LTD BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
 
 /* Assumptions:
  *
- * ARMv8-a, AArch64
- * Unaligned accesses
- * wchar_t is 4 bytes
+ * ARMv8-a, AArch64, unaligned accesses, wchar_t is 4 bytes
  */
 
 #include <private/bionic_asm.h>
@@ -38,22 +63,25 @@
 #define dstin	x0
 #define src	x1
 #define count	x2
-#define tmp1	x3
-#define tmp1w	w3
-#define tmp2	x4
-#define tmp2w	w4
-#define tmp3	x5
-#define tmp3w	w5
-#define dst	x6
+#define srcend	x3
+#define dstend	x4
+#define tmp1	x5
+#define A_l	x6
+#define A_h	x7
+#define B_l	x8
+#define B_h	x9
+#define C_l	x10
+#define C_h	x11
+#define D_l	x12
+#define D_h	x13
+#define E_l	count
+#define E_h	tmp1
 
-#define A_l	x7
-#define A_h	x8
-#define B_l	x9
-#define B_h	x10
-#define C_l	x11
-#define C_h	x12
-#define D_l	x13
-#define D_h	x14
+/* All memmoves up to 96 bytes are done by memcpy as it supports overlaps.
+   Larger backwards copies are also handled by memcpy. The only remaining
+   case is forward large copies.  The destination is aligned, and an
+   unrolled loop processes 64 bytes per iteration.
+*/
 
 #if defined(WMEMMOVE)
 ENTRY(wmemmove)
@@ -61,267 +89,63 @@
 #else
 ENTRY(memmove)
 #endif
-	cmp	dstin, src
-	b.lo	.Ldownwards
-	add	tmp1, src, count
-	cmp	dstin, tmp1
-	b.hs	memcpy		/* No overlap.  */
+	sub	tmp1, dstin, src
+	cmp	count, 96
+	ccmp	tmp1, count, 2, hi
+	b.hs	memcpy
 
-	/* Upwards move with potential overlap.
-	 * Need to move from the tail backwards.  SRC and DST point one
-	 * byte beyond the remaining data to move.  */
-	add	dst, dstin, count
-	add	src, src, count
-	cmp	count, #64
-	b.ge	.Lmov_not_short_up
+	cbz	tmp1, 3f
+	add	dstend, dstin, count
+	add	srcend, src, count
 
-	/* Deal with small moves quickly by dropping straight into the
-	 * exit block.  */
-.Ltail63up:
-	/* Move up to 48 bytes of data.  At this point we only need the
-	 * bottom 6 bits of count to be accurate.  */
-	ands	tmp1, count, #0x30
-	b.eq	.Ltail15up
-	sub	dst, dst, tmp1
-	sub	src, src, tmp1
-	cmp	tmp1w, #0x20
-	b.eq	1f
-	b.lt	2f
-	ldp	A_l, A_h, [src, #32]
-	stp	A_l, A_h, [dst, #32]
+	/* Align dstend to 16 byte alignment so that we don't cross cache line
+	   boundaries on both loads and stores.	 There are at least 96 bytes
+	   to copy, so copy 16 bytes unaligned and then align.	The loop
+	   copies 64 bytes per iteration and prefetches one iteration ahead.  */
+
+	and	tmp1, dstend, 15
+	ldp	D_l, D_h, [srcend, -16]
+	sub	srcend, srcend, tmp1
+	sub	count, count, tmp1
+	ldp	A_l, A_h, [srcend, -16]
+	stp	D_l, D_h, [dstend, -16]
+	ldp	B_l, B_h, [srcend, -32]
+	ldp	C_l, C_h, [srcend, -48]
+	ldp	D_l, D_h, [srcend, -64]!
+	sub	dstend, dstend, tmp1
+	subs	count, count, 128
+	b.ls	2f
+	nop
 1:
-	ldp	A_l, A_h, [src, #16]
-	stp	A_l, A_h, [dst, #16]
+	stp	A_l, A_h, [dstend, -16]
+	ldp	A_l, A_h, [srcend, -16]
+	stp	B_l, B_h, [dstend, -32]
+	ldp	B_l, B_h, [srcend, -32]
+	stp	C_l, C_h, [dstend, -48]
+	ldp	C_l, C_h, [srcend, -48]
+	stp	D_l, D_h, [dstend, -64]!
+	ldp	D_l, D_h, [srcend, -64]!
+	subs	count, count, 64
+	b.hi	1b
+
+	/* Write the last full set of 64 bytes.	 The remainder is at most 64
+	   bytes, so it is safe to always copy 64 bytes from the start even if
+	   there is just 1 byte left.  */
 2:
-	ldp	A_l, A_h, [src]
-	stp	A_l, A_h, [dst]
-.Ltail15up:
-	/* Move up to 15 bytes of data.  Does not assume additional data
-	 * being moved.  */
-	tbz	count, #3, 1f
-	ldr	tmp1, [src, #-8]!
-	str	tmp1, [dst, #-8]!
-1:
-	tbz	count, #2, 1f
-	ldr	tmp1w, [src, #-4]!
-	str	tmp1w, [dst, #-4]!
-1:
-	tbz	count, #1, 1f
-	ldrh	tmp1w, [src, #-2]!
-	strh	tmp1w, [dst, #-2]!
-1:
-	tbz	count, #0, 1f
-	ldrb	tmp1w, [src, #-1]
-	strb	tmp1w, [dst, #-1]
-1:
-	ret
+	ldp	E_l, E_h, [src, 48]
+	stp	A_l, A_h, [dstend, -16]
+	ldp	A_l, A_h, [src, 32]
+	stp	B_l, B_h, [dstend, -32]
+	ldp	B_l, B_h, [src, 16]
+	stp	C_l, C_h, [dstend, -48]
+	ldp	C_l, C_h, [src]
+	stp	D_l, D_h, [dstend, -64]
+	stp	E_l, E_h, [dstin, 48]
+	stp	A_l, A_h, [dstin, 32]
+	stp	B_l, B_h, [dstin, 16]
+	stp	C_l, C_h, [dstin]
+3:	ret
 
-.Lmov_not_short_up:
-	/* We don't much care about the alignment of DST, but we want SRC
-	 * to be 128-bit (16 byte) aligned so that we don't cross cache line
-	 * boundaries on both loads and stores.  */
-	ands	tmp2, src, #15		/* Bytes to reach alignment.  */
-	b.eq	2f
-	sub	count, count, tmp2
-	/* Move enough data to reach alignment; unlike memcpy, we have to
-	 * be aware of the overlap, which means we can't move data twice.  */
-	tbz	tmp2, #3, 1f
-	ldr	tmp1, [src, #-8]!
-	str	tmp1, [dst, #-8]!
-1:
-	tbz	tmp2, #2, 1f
-	ldr	tmp1w, [src, #-4]!
-	str	tmp1w, [dst, #-4]!
-1:
-	tbz	tmp2, #1, 1f
-	ldrh	tmp1w, [src, #-2]!
-	strh	tmp1w, [dst, #-2]!
-1:
-	tbz	tmp2, #0, 1f
-	ldrb	tmp1w, [src, #-1]!
-	strb	tmp1w, [dst, #-1]!
-1:
-
-	/* There may be less than 63 bytes to go now.  */
-	cmp	count, #63
-	b.le	.Ltail63up
-2:
-	subs	count, count, #128
-	b.ge	.Lmov_body_large_up
-	/* Less than 128 bytes to move, so handle 64 here and then jump
-	 * to the tail.  */
-	ldp	A_l, A_h, [src, #-64]!
-	ldp	B_l, B_h, [src, #16]
-	ldp	C_l, C_h, [src, #32]
-	ldp	D_l, D_h, [src, #48]
-	stp	A_l, A_h, [dst, #-64]!
-	stp	B_l, B_h, [dst, #16]
-	stp	C_l, C_h, [dst, #32]
-	stp	D_l, D_h, [dst, #48]
-	tst	count, #0x3f
-	b.ne	.Ltail63up
-	ret
-
-	/* Critical loop.  Start at a new Icache line boundary.  Assuming
-	 * 64 bytes per line this ensures the entire loop is in one line.  */
-	.p2align 6
-.Lmov_body_large_up:
-	/* There are at least 128 bytes to move.  */
-	ldp	A_l, A_h, [src, #-16]
-	ldp	B_l, B_h, [src, #-32]
-	ldp	C_l, C_h, [src, #-48]
-	ldp	D_l, D_h, [src, #-64]!
-1:
-	stp	A_l, A_h, [dst, #-16]
-	ldp	A_l, A_h, [src, #-16]
-	stp	B_l, B_h, [dst, #-32]
-	ldp	B_l, B_h, [src, #-32]
-	stp	C_l, C_h, [dst, #-48]
-	ldp	C_l, C_h, [src, #-48]
-	stp	D_l, D_h, [dst, #-64]!
-	ldp	D_l, D_h, [src, #-64]!
-	subs	count, count, #64
-	b.ge	1b
-	stp	A_l, A_h, [dst, #-16]
-	stp	B_l, B_h, [dst, #-32]
-	stp	C_l, C_h, [dst, #-48]
-	stp	D_l, D_h, [dst, #-64]!
-	tst	count, #0x3f
-	b.ne	.Ltail63up
-	ret
-
-
-.Ldownwards:
-	/* For a downwards move we can safely use memcpy provided that
-	 * DST is more than 16 bytes away from SRC.  */
-	sub	tmp1, src, #16
-	cmp	dstin, tmp1
-	b.ls	memcpy		/* May overlap, but not critically.  */
-
-	mov	dst, dstin	/* Preserve DSTIN for return value.  */
-	cmp	count, #64
-	b.ge	.Lmov_not_short_down
-
-	/* Deal with small moves quickly by dropping straight into the
-	 * exit block.  */
-.Ltail63down:
-	/* Move up to 48 bytes of data.  At this point we only need the
-	 * bottom 6 bits of count to be accurate.  */
-	ands	tmp1, count, #0x30
-	b.eq	.Ltail15down
-	add	dst, dst, tmp1
-	add	src, src, tmp1
-	cmp	tmp1w, #0x20
-	b.eq	1f
-	b.lt	2f
-	ldp	A_l, A_h, [src, #-48]
-	stp	A_l, A_h, [dst, #-48]
-1:
-	ldp	A_l, A_h, [src, #-32]
-	stp	A_l, A_h, [dst, #-32]
-2:
-	ldp	A_l, A_h, [src, #-16]
-	stp	A_l, A_h, [dst, #-16]
-.Ltail15down:
-	/* Move up to 15 bytes of data.  Does not assume additional data
-	   being moved.  */
-	tbz	count, #3, 1f
-	ldr	tmp1, [src], #8
-	str	tmp1, [dst], #8
-1:
-	tbz	count, #2, 1f
-	ldr	tmp1w, [src], #4
-	str	tmp1w, [dst], #4
-1:
-	tbz	count, #1, 1f
-	ldrh	tmp1w, [src], #2
-	strh	tmp1w, [dst], #2
-1:
-	tbz	count, #0, 1f
-	ldrb	tmp1w, [src]
-	strb	tmp1w, [dst]
-1:
-	ret
-
-.Lmov_not_short_down:
-	/* We don't much care about the alignment of DST, but we want SRC
-	 * to be 128-bit (16 byte) aligned so that we don't cross cache line
-	 * boundaries on both loads and stores.  */
-	neg	tmp2, src
-	ands	tmp2, tmp2, #15		/* Bytes to reach alignment.  */
-	b.eq	2f
-	sub	count, count, tmp2
-	/* Move enough data to reach alignment; unlike memcpy, we have to
-	 * be aware of the overlap, which means we can't move data twice.  */
-	tbz	tmp2, #3, 1f
-	ldr	tmp1, [src], #8
-	str	tmp1, [dst], #8
-1:
-	tbz	tmp2, #2, 1f
-	ldr	tmp1w, [src], #4
-	str	tmp1w, [dst], #4
-1:
-	tbz	tmp2, #1, 1f
-	ldrh	tmp1w, [src], #2
-	strh	tmp1w, [dst], #2
-1:
-	tbz	tmp2, #0, 1f
-	ldrb	tmp1w, [src], #1
-	strb	tmp1w, [dst], #1
-1:
-
-	/* There may be less than 63 bytes to go now.  */
-	cmp	count, #63
-	b.le	.Ltail63down
-2:
-	subs	count, count, #128
-	b.ge	.Lmov_body_large_down
-	/* Less than 128 bytes to move, so handle 64 here and then jump
-	 * to the tail.  */
-	ldp	A_l, A_h, [src]
-	ldp	B_l, B_h, [src, #16]
-	ldp	C_l, C_h, [src, #32]
-	ldp	D_l, D_h, [src, #48]
-	stp	A_l, A_h, [dst]
-	stp	B_l, B_h, [dst, #16]
-	stp	C_l, C_h, [dst, #32]
-	stp	D_l, D_h, [dst, #48]
-	tst	count, #0x3f
-	add	src, src, #64
-	add	dst, dst, #64
-	b.ne	.Ltail63down
-	ret
-
-	/* Critical loop.  Start at a new cache line boundary.  Assuming
-	 * 64 bytes per line this ensures the entire loop is in one line.  */
-	.p2align 6
-.Lmov_body_large_down:
-	/* There are at least 128 bytes to move.  */
-	ldp	A_l, A_h, [src, #0]
-	sub	dst, dst, #16		/* Pre-bias.  */
-	ldp	B_l, B_h, [src, #16]
-	ldp	C_l, C_h, [src, #32]
-	ldp	D_l, D_h, [src, #48]!	/* src += 64 - Pre-bias.  */
-1:
-	stp	A_l, A_h, [dst, #16]
-	ldp	A_l, A_h, [src, #16]
-	stp	B_l, B_h, [dst, #32]
-	ldp	B_l, B_h, [src, #32]
-	stp	C_l, C_h, [dst, #48]
-	ldp	C_l, C_h, [src, #48]
-	stp	D_l, D_h, [dst, #64]!
-	ldp	D_l, D_h, [src, #64]!
-	subs	count, count, #64
-	b.ge	1b
-	stp	A_l, A_h, [dst, #16]
-	stp	B_l, B_h, [dst, #32]
-	stp	C_l, C_h, [dst, #48]
-	stp	D_l, D_h, [dst, #64]
-	add	src, src, #16
-	add	dst, dst, #64 + 16
-	tst	count, #0x3f
-	b.ne	.Ltail63down
-	ret
 #if defined(WMEMMOVE)
 END(wmemmove)
 #else