diff --git a/libc/arch-arm/bionic/memcpy.S b/libc/arch-arm/bionic/memcpy.S
new file mode 100644
index 0000000..f6e4a7d
--- /dev/null
+++ b/libc/arch-arm/bionic/memcpy.S
@@ -0,0 +1,384 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+	.text
+
+    .global memcpy
+    .type memcpy, %function
+    .align 4
+
+		/*
+		 * Optimized memcpy() for ARM.
+         *
+		 * note that memcpy() always returns the destination pointer,
+		 * so we have to preserve R0.
+		 */
+	
+memcpy:	
+		/* The stack must always be 64-bits aligned to be compliant with the 
+		 * ARM ABI. Since we have to save R0, we might as well save R4
+		 * which we can use for better pipelining of the reads below
+		 */
+        .fnstart
+        .save       {r0, r4, lr}
+        stmfd       sp!, {r0, r4, lr}
+        /* Making room for r5-r11 which will be spilled later */
+        .pad        #28
+        sub         sp, sp, #28
+
+        // preload the destination because we'll align it to a cache line
+        // with small writes. Also start the source "pump".
+        pld         [r0, #0]
+        pld         [r1, #0]
+        pld         [r1, #32]
+
+		/* it simplifies things to take care of len<4 early */
+		cmp			r2, #4
+		blo			copy_last_3_and_return
+
+		/* compute the offset to align the source
+		 * offset = (4-(src&3))&3 = -src & 3
+		 */
+		rsb			r3, r1, #0
+		ands		r3, r3, #3
+		beq			src_aligned
+
+		/* align source to 32 bits. We need to insert 2 instructions between
+		 * a ldr[b|h] and str[b|h] because byte and half-word instructions
+		 * stall 2 cycles.
+		 */
+		movs		r12, r3, lsl #31
+		sub			r2, r2, r3		/* we know that r3 <= r2 because r2 >= 4 */
+		ldrmib		r3, [r1], #1
+		ldrcsb		r4, [r1], #1
+		ldrcsb		r12,[r1], #1
+        strmib		r3, [r0], #1
+		strcsb		r4, [r0], #1
+		strcsb		r12,[r0], #1
+		
+src_aligned:
+
+		/* see if src and dst are aligned together (congruent) */	
+		eor			r12, r0, r1
+		tst			r12, #3
+		bne			non_congruent
+
+        /* Use post-incriment mode for stm to spill r5-r11 to reserved stack
+         * frame. Don't update sp.
+         */
+        stmea		sp, {r5-r11}
+
+		/* align the destination to a cache-line */
+		rsb         r3, r0, #0
+		ands		r3, r3, #0x1C
+		beq         congruent_aligned32
+		cmp         r3, r2
+		andhi		r3, r2, #0x1C
+
+		/* conditionnaly copies 0 to 7 words (length in r3) */
+		movs		r12, r3, lsl #28 
+		ldmcsia		r1!, {r4, r5, r6, r7}	/* 16 bytes */
+		ldmmiia		r1!, {r8, r9}			/*  8 bytes */
+		stmcsia		r0!, {r4, r5, r6, r7}
+		stmmiia		r0!, {r8, r9}
+		tst         r3, #0x4
+		ldrne		r10,[r1], #4			/*  4 bytes */
+		strne		r10,[r0], #4
+		sub         r2, r2, r3
+
+congruent_aligned32:
+		/*
+		 * here source is aligned to 32 bytes.
+		 */
+
+cached_aligned32:
+        subs        r2, r2, #32
+        blo         less_than_32_left
+
+        /*
+         * We preload a cache-line up to 64 bytes ahead. On the 926, this will
+         * stall only until the requested world is fetched, but the linefill 
+         * continues in the the background.
+         * While the linefill is going, we write our previous cache-line
+         * into the write-buffer (which should have some free space).
+         * When the linefill is done, the writebuffer will
+         * start dumping its content into memory
+         *
+         * While all this is going, we then load a full cache line into
+         * 8 registers, this cache line should be in the cache by now
+         * (or partly in the cache).
+         *
+         * This code should work well regardless of the source/dest alignment.
+         *
+         */
+
+        // Align the preload register to a cache-line because the cpu does
+        // "critical word first" (the first word requested is loaded first).
+        bic         r12, r1, #0x1F
+        add         r12, r12, #64
+
+1:      ldmia		r1!, { r4-r11 }
+        pld         [r12, #64]
+        subs        r2, r2, #32
+
+        // NOTE: if r12 is more than 64 ahead of r1, the following ldrhi
+        // for ARM9 preload will not be safely guarded by the preceding subs.
+        // When it is safely guarded the only possibility to have SIGSEGV here 
+        // is because the caller overstates the length.
+        ldrhi       r3, [r12], #32      /* cheap ARM9 preload */
+        stmia       r0!, { r4-r11 }
+		bhs         1b
+		
+        add         r2, r2, #32
+
+
+
+
+less_than_32_left:
+		/* 
+		 * less than 32 bytes left at this point (length in r2)
+		 */
+
+		/* skip all this if there is nothing to do, which should
+		 * be a common case (if not executed the code below takes
+		 * about 16 cycles)
+		 */
+		tst			r2, #0x1F
+		beq			1f
+
+		/* conditionnaly copies 0 to 31 bytes */
+		movs		r12, r2, lsl #28 
+		ldmcsia		r1!, {r4, r5, r6, r7}	/* 16 bytes */
+		ldmmiia		r1!, {r8, r9}			/*  8 bytes */
+		stmcsia		r0!, {r4, r5, r6, r7}
+		stmmiia		r0!, {r8, r9}
+		movs		r12, r2, lsl #30
+		ldrcs		r3, [r1], #4			/*  4 bytes */
+		ldrmih		r4, [r1], #2			/*  2 bytes */
+		strcs		r3, [r0], #4		
+		strmih		r4, [r0], #2
+		tst         r2, #0x1
+		ldrneb		r3, [r1]				/*  last byte  */
+		strneb		r3, [r0]
+
+		/* we're done! restore everything and return */
+1:		ldmfd		sp!, {r5-r11}
+		ldmfd		sp!, {r0, r4, lr}
+		bx			lr
+
+		/********************************************************************/
+
+non_congruent:
+		/*
+		 * here source is aligned to 4 bytes
+		 * but destination is not.
+		 *
+		 * in the code below r2 is the number of bytes read 
+		 * (the number of bytes written is always smaller, because we have
+		 * partial words in the shift queue)
+		 */
+		cmp			r2, #4
+		blo			copy_last_3_and_return
+		
+        /* Use post-incriment mode for stm to spill r5-r11 to reserved stack
+         * frame. Don't update sp.
+         */
+        stmea		sp, {r5-r11}
+		
+		/* compute shifts needed to align src to dest */
+		rsb			r5, r0, #0
+		and			r5, r5, #3			/* r5 = # bytes in partial words */
+		mov			r12, r5, lsl #3		/* r12 = right */ 
+		rsb			lr, r12, #32		/* lr = left  */
+		
+		/* read the first word */
+		ldr			r3, [r1], #4
+		sub			r2, r2, #4
+		
+		/* write a partial word (0 to 3 bytes), such that destination
+		 * becomes aligned to 32 bits (r5 = nb of words to copy for alignment)
+		 */
+		movs		r5, r5, lsl #31
+		strmib		r3, [r0], #1
+		movmi		r3, r3, lsr #8		
+		strcsb		r3, [r0], #1
+		movcs		r3, r3, lsr #8
+		strcsb		r3, [r0], #1
+		movcs		r3, r3, lsr #8
+
+		cmp			r2, #4
+		blo			partial_word_tail
+		
+		/* Align destination to 32 bytes (cache line boundary) */
+1:		tst			r0, #0x1c
+		beq			2f
+		ldr			r5, [r1], #4
+		sub         r2, r2, #4
+		orr			r4, r3, r5,		lsl lr
+		mov			r3, r5,			lsr r12
+		str			r4, [r0], #4
+        cmp         r2, #4
+		bhs			1b
+		blo			partial_word_tail
+
+		/* copy 32 bytes at a time */
+2:		subs		r2, r2, #32
+		blo			less_than_thirtytwo
+
+		/* Use immediate mode for the shifts, because there is an extra cycle
+		 * for register shifts, which could account for up to 50% of
+		 * performance hit.
+		 */
+
+        cmp			r12, #24
+		beq			loop24
+		cmp			r12, #8
+		beq			loop8
+
+loop16:
+        ldr         r12, [r1], #4
+1:      mov         r4, r12
+		ldmia		r1!, {   r5,r6,r7,  r8,r9,r10,r11}
+        pld         [r1, #64]
+		subs		r2, r2, #32
+        ldrhs       r12, [r1], #4
+		orr			r3, r3, r4,		lsl #16
+		mov			r4, r4,			lsr #16
+		orr			r4, r4, r5,		lsl #16
+		mov			r5, r5,			lsr #16
+		orr			r5, r5, r6,		lsl #16
+		mov			r6, r6,			lsr #16
+		orr			r6, r6, r7,		lsl #16
+		mov			r7, r7,			lsr #16
+		orr			r7, r7, r8,		lsl #16
+		mov			r8, r8,			lsr #16
+		orr			r8, r8, r9,		lsl #16
+		mov			r9, r9,			lsr #16
+		orr			r9, r9, r10,	lsl #16
+		mov			r10, r10,		lsr #16
+		orr			r10, r10, r11,	lsl #16
+		stmia		r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
+		mov			r3, r11,		lsr #16
+		bhs			1b
+		b			less_than_thirtytwo
+
+loop8:
+        ldr         r12, [r1], #4
+1:      mov         r4, r12
+		ldmia		r1!, {   r5,r6,r7,  r8,r9,r10,r11}
+        pld         [r1, #64]
+		subs		r2, r2, #32
+        ldrhs       r12, [r1], #4
+		orr			r3, r3, r4,		lsl #24
+		mov			r4, r4,			lsr #8
+		orr			r4, r4, r5,		lsl #24
+		mov			r5, r5,			lsr #8
+		orr			r5, r5, r6,		lsl #24
+		mov			r6, r6,			lsr #8
+		orr			r6, r6, r7,		lsl #24
+		mov			r7, r7,			lsr #8
+		orr			r7, r7, r8,		lsl #24
+		mov			r8, r8,			lsr #8
+		orr			r8, r8, r9,		lsl #24
+		mov			r9, r9,			lsr #8
+		orr			r9, r9, r10,	lsl #24
+		mov			r10, r10,		lsr #8
+		orr			r10, r10, r11,	lsl #24
+		stmia		r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
+		mov			r3, r11,		lsr #8
+		bhs			1b
+		b			less_than_thirtytwo
+
+loop24:
+        ldr         r12, [r1], #4
+1:      mov         r4, r12
+		ldmia		r1!, {   r5,r6,r7,  r8,r9,r10,r11}
+        pld         [r1, #64]
+		subs		r2, r2, #32
+        ldrhs       r12, [r1], #4
+		orr			r3, r3, r4,		lsl #8
+		mov			r4, r4,			lsr #24
+		orr			r4, r4, r5,		lsl #8
+		mov			r5, r5,			lsr #24
+		orr			r5, r5, r6,		lsl #8
+		mov			r6, r6,			lsr #24
+		orr			r6, r6, r7,		lsl #8
+		mov			r7, r7,			lsr #24
+		orr			r7, r7, r8,		lsl #8
+		mov			r8, r8,			lsr #24
+		orr			r8, r8, r9,		lsl #8
+		mov			r9, r9,			lsr #24
+		orr			r9, r9, r10,	lsl #8
+		mov			r10, r10,		lsr #24
+		orr			r10, r10, r11,	lsl #8
+		stmia		r0!, {r3,r4,r5,r6, r7,r8,r9,r10}
+		mov			r3, r11,		lsr #24
+		bhs			1b
+
+
+less_than_thirtytwo:
+		/* copy the last 0 to 31 bytes of the source */
+		rsb			r12, lr, #32		/* we corrupted r12, recompute it  */
+		add			r2, r2, #32
+		cmp			r2, #4
+		blo			partial_word_tail
+
+1:		ldr			r5, [r1], #4
+		sub         r2, r2, #4
+		orr			r4, r3, r5,		lsl lr
+		mov			r3,	r5,			lsr r12
+		str			r4, [r0], #4
+        cmp         r2, #4
+		bhs			1b
+
+partial_word_tail:
+		/* we have a partial word in the input buffer */
+		movs		r5, lr, lsl #(31-3)
+		strmib		r3, [r0], #1
+		movmi		r3, r3, lsr #8
+		strcsb		r3, [r0], #1
+		movcs		r3, r3, lsr #8
+		strcsb		r3, [r0], #1
+		
+		/* Refill spilled registers from the stack. Don't update sp. */
+		ldmfd		sp, {r5-r11}
+
+copy_last_3_and_return:
+		movs		r2, r2, lsl #31	/* copy remaining 0, 1, 2 or 3 bytes */
+		ldrmib		r2, [r1], #1
+		ldrcsb		r3, [r1], #1
+		ldrcsb		r12,[r1]
+		strmib		r2, [r0], #1
+		strcsb		r3, [r0], #1
+		strcsb		r12,[r0]
+
+        /* we're done! restore sp and spilled registers and return */
+        add         sp,  sp, #28
+		ldmfd		sp!, {r0, r4, lr}
+		bx			lr
+        .fnend
+