Revert "Update bionic kernel headers using update_all.py"

This reverts commit 94a85f663694e1869acb1c2e8a3c374a6fa3ab86

There is a smoke test failure for Prime but Crespo/Stingray are fine. Will revert the change for now until further investigation is made.
diff --git a/libc/kernel/arch-arm/asm/arch/board.h b/libc/kernel/arch-arm/asm/arch/board.h
index 78fa4b0..a7a4c66 100644
--- a/libc/kernel/arch-arm/asm/arch/board.h
+++ b/libc/kernel/arch-arm/asm/arch/board.h
@@ -7,159 +7,157 @@
  ***   structures, and macros generated from the original header, and thus,
  ***   contains no copyrightable information.
  ***
- ***   To edit the content of this header, modify the corresponding
- ***   source file (e.g. under external/kernel-headers/original/) then
- ***   run bionic/libc/kernel/tools/update_all.py
- ***
- ***   Any manual change here will be lost the next time this script will
- ***   be run. You've been warned!
- ***
  ****************************************************************************
  ****************************************************************************/
 #ifndef _OMAP_BOARD_H
 #define _OMAP_BOARD_H
+
 #include <linux/types.h>
+
 #include <asm/arch/gpio-switch.h>
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
+
 #define OMAP_TAG_CLOCK 0x4f01
 #define OMAP_TAG_MMC 0x4f02
 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03
 #define OMAP_TAG_USB 0x4f04
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 #define OMAP_TAG_LCD 0x4f05
 #define OMAP_TAG_GPIO_SWITCH 0x4f06
 #define OMAP_TAG_UART 0x4f07
 #define OMAP_TAG_FBMEM 0x4f08
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 #define OMAP_TAG_STI_CONSOLE 0x4f09
 #define OMAP_TAG_CAMERA_SENSOR 0x4f0a
 #define OMAP_TAG_BT 0x4f0b
+
 #define OMAP_TAG_BOOT_REASON 0x4f80
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 #define OMAP_TAG_FLASH_PART 0x4f81
 #define OMAP_TAG_VERSION_STR 0x4f82
+
 struct omap_clock_config {
+
  u8 system_clock_type;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 };
+
 struct omap_mmc_conf {
  unsigned enabled:1;
+
  unsigned nomux:1;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
+
  unsigned cover:1;
+
  unsigned wire4:1;
  s16 power_pin;
  s16 switch_pin;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  s16 wp_pin;
 };
+
 struct omap_mmc_config {
  struct omap_mmc_conf mmc[2];
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 };
+
 struct omap_serial_console_config {
  u8 console_uart;
  u32 console_speed;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 };
+
 struct omap_sti_console_config {
  unsigned enable:1;
  u8 channel;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 };
+
 struct omap_camera_sensor_config {
  u16 reset_gpio;
  int (*power_on)(void * data);
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  int (*power_off)(void * data);
 };
+
 struct omap_usb_config {
+
  unsigned register_host:1;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  unsigned register_dev:1;
  u8 otg;
+
  u8 hmc_mode;
+
  u8 rwc;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
+
  u8 pins[3];
 };
+
 struct omap_lcd_config {
  char panel_name[16];
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  char ctrl_name[16];
  s16 nreset_gpio;
  u8 data_lines;
 };
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
+
 struct device;
 struct fb_info;
 struct omap_backlight_config {
  int default_intensity;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  int (*set_power)(struct device *dev, int state);
  int (*check_fb)(struct fb_info *fb);
 };
+
 struct omap_fbmem_config {
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  u32 start;
  u32 size;
 };
+
 struct omap_pwm_led_platform_data {
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  const char *name;
  int intensity_timer;
  int blink_timer;
  void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 };
+
 struct omap_gpio_switch_config {
  char name[12];
  u16 gpio;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  int flags:4;
  int type:4;
  int key_code:24;
 };
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
+
 struct omap_uart_config {
+
  unsigned int enabled_uarts;
 };
+
 struct omap_flash_part_config {
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  char part_table[0];
 };
+
 struct omap_boot_reason_config {
  char reason_str[12];
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 };
+
 struct omap_version_config {
  char component[12];
  char version[12];
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 };
+
 struct omap_board_config_entry {
  u16 tag;
  u16 len;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  u8 data[0];
 };
+
 struct omap_board_config_kernel {
  u16 tag;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  const void *data;
 };
+
 struct omap_bluetooth_config {
  u8 chip_type;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  u8 bt_uart;
  u8 bd_addr[6];
  u8 bt_sysclk;
  int bt_wakeup_gpio;
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
  int host_wakeup_gpio;
  int reset_gpio;
 };
+
 #define omap_get_config(tag, type)   ((const type *) __omap_get_config((tag), sizeof(type), 0))
-/* WARNING: DO NOT EDIT, AUTO-GENERATED CODE - SEE TOP FOR INSTRUCTIONS */
 #define omap_get_nr_config(tag, type, nr)   ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
 #endif