diff --git a/libc/arch-arm/krait/bionic/memcpy.S b/libc/arch-arm/krait/bionic/memcpy.S
new file mode 100644
index 0000000..0cd4d44
--- /dev/null
+++ b/libc/arch-arm/krait/bionic/memcpy.S
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* Assumes neon instructions and a cache line size of 32 bytes. */
+
+#include <machine/cpu-features.h>
+#include <machine/asm.h>
+
+/*
+ * This code assumes it is running on a processor that supports all arm v7
+ * instructions, that supports neon instructions, and that has a 32 byte
+ * cache line.
+ */
+
+        .text
+        .fpu    neon
+
+#define CACHE_LINE_SIZE     32
+
+ENTRY(memcpy)
+        .save       {r0, lr}
+        /* start preloading as early as possible */
+        pld         [r1, #(CACHE_LINE_SIZE*0)]
+        stmfd       sp!, {r0, lr}
+        pld         [r1, #(CACHE_LINE_SIZE*2)]
+
+        /* do we have at least 16-bytes to copy (needed for alignment below) */
+        cmp         r2, #16
+        blo         5f
+
+        /* align destination to cache-line for the write-buffer */
+        rsb         r3, r0, #0
+        ands        r3, r3, #0xF
+        beq         0f
+
+        /* copy up to 15-bytes (count in r3) */
+        sub         r2, r2, r3
+        movs        ip, r3, lsl #31
+        ldrmib      lr, [r1], #1
+        strmib      lr, [r0], #1
+        ldrcsb      ip, [r1], #1
+        ldrcsb      lr, [r1], #1
+        strcsb      ip, [r0], #1
+        strcsb      lr, [r0], #1
+        movs        ip, r3, lsl #29
+        bge         1f
+        // copies 4 bytes, destination 32-bits aligned
+        vld4.8      {d0[0], d1[0], d2[0], d3[0]}, [r1]!
+        vst4.8      {d0[0], d1[0], d2[0], d3[0]}, [r0, :32]!
+1:      bcc         2f
+        // copies 8 bytes, destination 64-bits aligned
+        vld1.8      {d0}, [r1]!
+        vst1.8      {d0}, [r0, :64]!
+2:
+
+0:      /* preload immediately the next cache line, which we may need */
+        pld         [r1, #(CACHE_LINE_SIZE*0)]
+        pld         [r1, #(CACHE_LINE_SIZE*2)]
+
+        /* make sure we have at least 64 bytes to copy */
+        subs        r2, r2, #64
+        blo         2f
+
+        /* Preload all the cache lines we need.
+         * NOTE: The number of pld below depends on CACHE_LINE_SIZE,
+         * ideally we would increase the distance in the main loop to
+         * avoid the goofy code below. In practice this doesn't seem to make
+         * a big difference.
+         * NOTE: The value CACHE_LINE_SIZE * 8 was chosen through
+         * experimentation.
+         */
+        pld         [r1, #(CACHE_LINE_SIZE*4)]
+        pld         [r1, #(CACHE_LINE_SIZE*6)]
+        pld         [r1, #(CACHE_LINE_SIZE*8)]
+
+1:      /* The main loop copies 64 bytes at a time */
+        vld1.8      {d0  - d3},   [r1]!
+        vld1.8      {d4  - d7},   [r1]!
+        pld         [r1, #(CACHE_LINE_SIZE*8)]
+        subs        r2, r2, #64
+        vst1.8      {d0  - d3},   [r0, :128]!
+        vst1.8      {d4  - d7},   [r0, :128]!
+        bhs         1b
+
+2:      /* fix-up the remaining count and make sure we have >= 32 bytes left */
+        add         r2, r2, #64
+        subs        r2, r2, #32
+        blo         4f
+
+3:      /* 32 bytes at a time. These cache lines were already preloaded */
+        vld1.8      {d0 - d3},  [r1]!
+        subs        r2, r2, #32
+        vst1.8      {d0 - d3},  [r0, :128]!
+        bhs         3b
+4:      /* less than 32 left */
+        add         r2, r2, #32
+        tst         r2, #0x10
+        beq         5f
+        // copies 16 bytes, 128-bits aligned
+        vld1.8      {d0, d1}, [r1]!
+        vst1.8      {d0, d1}, [r0, :128]!
+
+5:      /* copy up to 15-bytes (count in r2) */
+        movs        ip, r2, lsl #29
+        bcc         1f
+        vld1.8      {d0}, [r1]!
+        vst1.8      {d0}, [r0]!
+1:      bge         2f
+        vld4.8      {d0[0], d1[0], d2[0], d3[0]}, [r1]!
+        vst4.8      {d0[0], d1[0], d2[0], d3[0]}, [r0]!
+2:      movs        ip, r2, lsl #31
+        ldrmib      r3, [r1], #1
+        ldrcsb      ip, [r1], #1
+        ldrcsb      lr, [r1], #1
+        strmib      r3, [r0], #1
+        strcsb      ip, [r0], #1
+        strcsb      lr, [r0], #1
+
+        ldmfd       sp!, {r0, lr}
+        bx          lr
+END(memcpy)
diff --git a/libc/arch-arm/krait/bionic/memset.S b/libc/arch-arm/krait/bionic/memset.S
new file mode 100644
index 0000000..a2e2d80
--- /dev/null
+++ b/libc/arch-arm/krait/bionic/memset.S
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2008 The Android Open Source Project
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *  * Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *  * Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <machine/cpu-features.h>
+#include <machine/asm.h>
+
+/*
+ * This code assumes it is running on a processor that supports all arm v7
+ * instructions, that supports neon instructions, and that supports
+ * unaligned neon instruction accesses to memory.
+ */
+
+    .fpu    neon
+
+ENTRY(bzero)
+        mov     r2, r1
+        mov     r1, #0
+END(bzero)
+
+/* memset() returns its first argument.  */
+ENTRY(memset)
+        .save       {r0}
+        stmfd       sp!, {r0}
+
+        vdup.8      q0, r1
+
+        /* make sure we have at least 32 bytes to write */
+        subs        r2, r2, #32
+        blo         2f
+        vmov        q1, q0
+
+1:      /* The main loop writes 32 bytes at a time */
+        subs        r2, r2, #32
+        vst1.8      {d0 - d3}, [r0]!
+        bhs         1b
+
+2:      /* less than 32 left */
+        add         r2, r2, #32
+        tst         r2, #0x10
+        beq         3f
+
+        // writes 16 bytes, 128-bits aligned
+        vst1.8      {d0, d1}, [r0]!
+3:      /* write up to 15-bytes (count in r2) */
+        movs        ip, r2, lsl #29
+        bcc         1f
+        vst1.8      {d0}, [r0]!
+1:      bge         2f
+        vst1.32     {d0[0]}, [r0]!
+2:      movs        ip, r2, lsl #31
+        strmib      r1, [r0], #1
+        strcsb      r1, [r0], #1
+        strcsb      r1, [r0], #1
+        ldmfd       sp!, {r0}
+        bx          lr
+END(memset)
diff --git a/libc/arch-arm/krait/krait.mk b/libc/arch-arm/krait/krait.mk
new file mode 100644
index 0000000..ab55d24
--- /dev/null
+++ b/libc/arch-arm/krait/krait.mk
@@ -0,0 +1,4 @@
+$(call libc-add-cpu-variant-src,MEMCPY,arch-arm/krait/bionic/memcpy.S)
+$(call libc-add-cpu-variant-src,MEMSET,arch-arm/krait/bionic/memset.S)
+
+include bionic/libc/arch-arm/generic/generic.mk